/*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include "am335x-olimex-som-nand.dts"

/ {
	model = "OLIMEX AM335x-SOM-EVB-NAND";
	compatible = "olimex,am335x_som_evb_nand", "ti,am33xx";

	backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&ecap0 0 50000 1>;
		brightness-levels = <0 51 53 56 62 75 101 152 255>;
		default-brightness-level = <8>;
	};

	leds {
		pinctrl-names = "default";
		pinctrl-0 = <&evb_leds_pins_default>;

		compatible = "gpio-leds";

		led@1 {
			label = "olimex-evb:red:led2";
			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
			default-state = "off";
		};

		led@2 {
			label = "olimex-evb:yellow:led3";
			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "cpu0";
			default-state = "off";
		};

	};

	panel {
		compatible = "ti,tilcdc,panel";
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&lcd_pins_default>;
		enable-gpios = <&gpio3 19 0>;

		panel-info {
			ac-bias = <255>;
			ac-bias-intrpt = <0>;
			dma-burst-sz = <16>;
			bpp = <16>;
			fdd = <0x80>;
			sync-edge = <0>;
			sync-ctrl = <1>;
			raster-order = <0>;
			fifo-th = <0>;
		};

		display-timings {
			native-mode = <&timing2>;

			timing0: 480x272 {
				clock-frequency = <9000000>;
				hactive = <480>;
				vactive = <272>;
				hfront-porch = <525>;
				hback-porch = <8>;
				vfront-porch = <576>;
				vback-porch = <8>;
				hsync-len = <30>;
				vsync-len = <5>;
				hsync-active = <0>;
				vsync-active = <0>;
			};

			timing1: 800x480 {
				clock-frequency = <33000000>;
				hactive = <800>;
				vactive = <480>;
				hfront-porch = <209>;
				hback-porch = <16>;
				vfront-porch = <22>;
				vback-porch = <22>;
				hsync-len = <30>;
				vsync-len = <1>;
				hsync-active = <0>;
				vsync-active = <0>;
			};

			timing2: 800x600 {
				clock-frequency = <40000000>;
				hactive = <800>;
				vactive = <600>;
				hfront-porch = <44>;
				hback-porch = <88>;
				vfront-porch = <5>;
				vback-porch = <19>;
				hsync-len = <128>;
				vsync-len = <4>;
				hsync-active = <0>;
				vsync-active = <0>;
			};

			timing3: 1024x600 {
				clock-frequency = <45000000>;
				hactive = <1024>;
				vactive = <600>;
				hfront-porch = <16>;
				hback-porch = <150>;
				vfront-porch = <2>;
				vback-porch = <21>;
				hsync-len = <10>;
				vsync-len = <2>;
				hsync-active = <0>;
				vsync-active = <0>;
			};
		};
	};
};

&am33xx_pinmux{

	backlight_pins_default: backlight_pins_default {
		pinctrl-single,pins = <
			0x164 ( PIN_OUTPUT | MUX_MODE0 ) /* (C18) eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
		>;
	};

	dcan0_pins_default: dcan0_pins_default {
		pinctrl-single,pins = <
			0x17c ( PIN_INPUT | MUX_MODE2 ) /* (D17) uart1_rtsn.dcan0_rx */
			0x178 ( PIN_OUTPUT | MUX_MODE2 ) /* (D18) uart1_ctsn.dcan0_tx */
		>;
	};

	evb_leds_pins_default: evb_leds_pins_default {
		pinctrl-single,pins = <
			0x1a8 ( PIN_OUTPUT | MUX_MODE7 ) /* (D13) mcasp0_axr1.gpio3[20] */
			0x1ac ( PIN_OUTPUT | MUX_MODE7 ) /* (A14) mcasp0_ahclkx.gpio3[21] */
		>;
	};

	i2c0_pins_default: i2c0_pins_default {
		pinctrl-single,pins = <
			0x18c ( PIN_INPUT | MUX_MODE0 ) /* (C16) I2C0_SCL.I2C0_SCL */
			0x188 ( PIN_INPUT | MUX_MODE0 ) /* (C17) I2C0_SDA.I2C0_SDA */
		>;
	};

	mdio_pins_default: mdio_pins_default {
		pinctrl-single,pins = <
			0x14c ( PIN_OUTPUT | MUX_MODE0 ) /* (M18) mdio_clk.mdio_clk */
			0x148 ( PIN_INPUT | MUX_MODE0 ) /* (M17) mdio_data.mdio_data */
		>;
	};

	lcd_pins_default: lcd_pins_default {
		pinctrl-single,pins = <
			0xe0 ( PIN_OUTPUT | MUX_MODE0 ) /* (U5) lcd_vsync.lcd_vsync */
			0xe4 ( PIN_OUTPUT | MUX_MODE0 ) /* (R5) lcd_hsync.lcd_hsync */
			0xe8 ( PIN_OUTPUT | MUX_MODE0 ) /* (V5) lcd_pclk.lcd_pclk */
			0xec ( PIN_OUTPUT | MUX_MODE0 ) /* (R6) lcd_ac_bias_en.lcd_ac_bias_en */
			0xa0 ( PIN_OUTPUT | MUX_MODE0 ) /* (R1) lcd_data0.lcd_data0 */
			0xa4 ( PIN_OUTPUT | MUX_MODE0 ) /* (R2) lcd_data1.lcd_data1 */
			0xa8 ( PIN_OUTPUT | MUX_MODE0 ) /* (R3) lcd_data2.lcd_data2 */
			0xac ( PIN_OUTPUT | MUX_MODE0 ) /* (R4) lcd_data3.lcd_data3 */
			0xb0 ( PIN_OUTPUT | MUX_MODE0 ) /* (T1) lcd_data4.lcd_data4 */
			0xb4 ( PIN_OUTPUT | MUX_MODE0 ) /* (T2) lcd_data5.lcd_data5 */
			0xb8 ( PIN_OUTPUT | MUX_MODE0 ) /* (T3) lcd_data6.lcd_data6 */
			0xbc ( PIN_OUTPUT | MUX_MODE0 ) /* (T4) lcd_data7.lcd_data7 */
			0xc0 ( PIN_OUTPUT | MUX_MODE0 ) /* (U1) lcd_data8.lcd_data8 */
			0xc4 ( PIN_OUTPUT | MUX_MODE0 ) /* (U2) lcd_data9.lcd_data9 */
			0xc8 ( PIN_OUTPUT | MUX_MODE0 ) /* (U3) lcd_data10.lcd_data10 */
			0xcc ( PIN_OUTPUT | MUX_MODE0 ) /* (U4) lcd_data11.lcd_data11 */
			0xd0 ( PIN_OUTPUT | MUX_MODE0 ) /* (V2) lcd_data12.lcd_data12 */
			0xd4 ( PIN_OUTPUT | MUX_MODE0 ) /* (V3) lcd_data13.lcd_data13 */
			0xd8 ( PIN_OUTPUT | MUX_MODE0 ) /* (V4) lcd_data14.lcd_data14 */
			0xdc ( PIN_OUTPUT | MUX_MODE0 ) /* (T5) lcd_data15.lcd_data15 */
			0x3c ( PIN_OUTPUT | MUX_MODE1 ) /* (U13) gpmc_ad15.lcd_data16 */
			0x38 ( PIN_OUTPUT | MUX_MODE1 ) /* (V13) gpmc_ad14.lcd_data17 */
			0x34 ( PIN_OUTPUT | MUX_MODE1 ) /* (R12) gpmc_ad13.lcd_data18 */
			0x30 ( PIN_OUTPUT | MUX_MODE1 ) /* (T12) gpmc_ad12.lcd_data19 */
			0x2c ( PIN_OUTPUT | MUX_MODE1 ) /* (U12) gpmc_ad11.lcd_data20 */
			0x28 ( PIN_OUTPUT | MUX_MODE1 ) /* (T11) gpmc_ad10.lcd_data21 */
			0x24 ( PIN_OUTPUT | MUX_MODE1 ) /* (T10) gpmc_ad9.lcd_data22 */
			0x20 ( PIN_OUTPUT | MUX_MODE1 ) /* (U10) gpmc_ad8.lcd_data23 */
		>;
	};

	phy1_pins_default: phy1_pins_default {
		pinctrl-single,pins = <
			0x108 ( PIN_INPUT | MUX_MODE0 ) /* (H16) gmii1_col.gmii1_col */
			0x10c ( PIN_INPUT | MUX_MODE0 ) /* (H17) gmii1_crs.gmii1_crs */
			0x110 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (J15) gmii1_rxer.gmii1_rxer */
			0x114 ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (J16) gmii1_txen.gmii1_txen */
			0x118 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (J17) gmii1_rxdv.gmii1_rxdv */
			0x12c ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (K18) gmii1_txclk.gmii1_txclk */
			0x130 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (L18) gmii1_rxclk.gmii1_rxclk */
			0x128 ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (K17) gmii1_txd0.gmii1_txd0 */
			0x124 ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (K16) gmii1_txd1.gmii1_txd1 */
			0x120 ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (K15) gmii1_txd2.gmii1_txd2 */
			0x11c ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (J18) gmii1_txd3.gmii1_txd3 */
			0x140 ( PIN_INPUT | MUX_MODE0 ) /* (M16) gmii1_rxd0.gmii1_rxd0 */
			0x13c ( PIN_INPUT | MUX_MODE0 ) /* (L15) gmii1_rxd1.gmii1_rxd1 */
			0x138 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (L16) gmii1_rxd2.gmii1_rxd2 */
			0x134 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (L17) gmii1_rxd3.gmii1_rxd3 */
		>;
	};

	spi0_pins_default: spi0_pins_default {
		pinctrl-single,pins = <
			0x150 ( PIN_INPUT | MUX_MODE0 ) /* (A17) spi0_sclk.spi0_sclk */
			0x154 ( PIN_INPUT | MUX_MODE0 ) /* (B17) spi0_d0.spi0_d0 */
			0x158 ( PIN_OUTPUT | MUX_MODE0 ) /* (B16) spi0_d1.spi0_d1 */
			0x15c ( PIN_OUTPUT | MUX_MODE0 ) /* (A16) spi0_cs0.spi0_cs0 */
		>;
	};

	spi1_pins_default: spi1_pins_default {
		pinctrl-single,pins = <
			0x190 ( PIN_INPUT | MUX_MODE3 ) /* (A13) mcasp0_aclkx.spi1_sclk */
			0x194 ( PIN_INPUT | MUX_MODE3 ) /* (B13) mcasp0_fsx.spi1_d0 */
			0x198 ( PIN_OUTPUT | MUX_MODE3 ) /* (D12) mcasp0_axr0.spi1_d1 */
			0x19c ( PIN_OUTPUT | MUX_MODE3 ) /* (C12) mcasp0_ahclkr.spi1_cs0 */
		>;
	};

	uart1_pins_default: uart1_pins_default {
		pinctrl-single,pins = <
			0x180 ( PIN_INPUT_PULLUP | MUX_MODE0 ) /* (D16) uart1_rxd.uart1_rxd */
			0x184 ( PIN_OUTPUT | MUX_MODE0 ) /* (D15) uart1_txd.uart1_txd */
		>;
	};

	uart4_pins_default: uart4_pins_default {
		pinctrl-single,pins = <
			0x168 ( PIN_INPUT_PULLUP | MUX_MODE1 ) /* (E18) uart0_ctsn.uart4_rxd */
			0x16c ( PIN_OUTPUT | MUX_MODE1 ) /* (E17) uart0_rtsn.uart4_txd */
		>;
	};

	usb0_pins_default: usb0_pins_default {
		pinctrl-single,pins = <
			0x21c ( PIN_OUTPUT | MUX_MODE0 ) /* (F16) USB0_DRVVBUS.USB0_DRVVBUS */
		>;
	};
};

&cppi41dma  {
	status = "okay";
};

&cpsw_emac0 {
	status = "okay";
	phy_id = <&davinci_mdio>, <0>;
	phy-mode = "mii";
};

&davinci_mdio {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mdio_pins_default>;
};

&dcan0 {
	pinctrl-names = "default";
	pinctrl-0 = <&dcan0_pins_default>;
	status = "okay";
};

&epwmss0 {
	status = "okay";
	ecap0: ecap@48300100 {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&backlight_pins_default>;
	};
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins_default>;
	status = "okay";
};

&lcdc {
	status = "okay";
};

&mac {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&phy1_pins_default>;
};

&spi0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins_default>;

	spidev@0 {
		spi-max-frequency = <24000000>;
		reg = <0>;
		compatible = "linux,spidev";
	};
};

&spi1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&spi1_pins_default>;

	spidev@0 {
		spi-max-frequency = <24000000>;
		reg = <0>;
		compatible = "linux,spidev";
	};
};

&tscadc {
	status = "okay";
	tsc {
		ti,wires = <4>;
		ti,x-plate-resistance = <200>;
		ti,coordinate-readouts = <5>;
		ti,wire-config = <0x00 0x11 0x22 0x33>;
	};
	adc {
		ti,adc-channels = <0 1 2 3>;
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins_default>;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart4_pins_default>;
	status = "okay";
};

&usb {
	status = "okay";
};

&usb_ctrl_mod {
	status = "okay";
};

&usb0_phy {
	status = "okay";
};

&usb0 {
	status = "okay";
	dr_mode = "peripheral";
};

&usb1_phy {
	status = "okay";
};

&usb1 {
	status = "okay";
	dr_mode = "host";
};