/dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" / { model = "Atmel SAMA5D2 Xplained"; compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; chosen { u-boot,dm-pre-reloc; stdout-path = &uart1; }; onewire_tm: onewire { gpios = <&pioA PIN_PB0 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_onewire_tm_default>; status = "okay"; w1_eeprom: w1_eeprom@0 { compatible = "maxim,ds24b33"; status = "okay"; }; }; ahb { usb1: ohci@00400000 { num-ports = <3>; atmel,vbus-gpio = <&pioA 42 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; usb2: ehci@00500000 { status = "okay"; }; sdmmc0: sdio-host@a0000000 { bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>; status = "okay"; u-boot,dm-pre-reloc; }; sdmmc1: sdio-host@b0000000 { bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>; status = "okay"; /* conflict with qspi0 */ u-boot,dm-pre-reloc; }; apb { hlcdc: hlcdc@f0000000 { atmel,vl-bpix = <4>; atmel,guard-time = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>; status = "okay"; u-boot,dm-pre-reloc; display-timings { u-boot,dm-pre-reloc; 480x272 { clock-frequency = <9000000>; hactive = <480>; vactive = <272>; hsync-len = <41>; hfront-porch = <2>; hback-porch = <2>; vfront-porch = <2>; vback-porch = <2>; vsync-len = <11>; u-boot,dm-pre-reloc; }; }; }; qspi0: spi@f0020000 { status = "okay"; flash@0 { compatible = "atmel,sama5d2-qspi-flash"; reg = <0>; #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi0_default>; spi-max-frequency = <83000000>; partition@00000000 { label = "boot"; reg = <0x00000000 0x00c00000>; }; partition@00c00000 { label = "rootfs"; reg = <0x00c00000 0x00000000>; }; }; }; spi0: spi@f8000000 { cs-gpios = <&pioA 17 0>, <0>, <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; u-boot,dm-pre-reloc; spi_flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; u-boot,dm-pre-reloc; }; }; macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; ethernet-phy@1 { reg = <0x1>; }; }; uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; status = "okay"; u-boot,dm-pre-reloc; }; i2c1: i2c@fc028000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; i2c_eeprom: i2c_eeprom@5c { compatible = "atmel,24mac402"; reg = <0x5c>; }; }; pioA: gpio@fc038000 { pinctrl { pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD4__TWD1>, <PIN_PD5__TWCK1>; bias-disable; }; pinctrl_lcd_base: pinctrl_lcd_base { pinmux = <PIN_PC30__LCDVSYNC>, <PIN_PC31__LCDHSYNC>, <PIN_PD1__LCDDEN>, <PIN_PD0__LCDPCK>; bias-disable; }; pinctrl_lcd_pwm: pinctrl_lcd_pwm { pinmux = <PIN_PC28__LCDPWM>; bias-disable; }; pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 { pinmux = <PIN_PC10__LCDDAT2>, <PIN_PC11__LCDDAT3>, <PIN_PC12__LCDDAT4>, <PIN_PC13__LCDDAT5>, <PIN_PC14__LCDDAT6>, <PIN_PC15__LCDDAT7>, <PIN_PC16__LCDDAT10>, <PIN_PC17__LCDDAT11>, <PIN_PC18__LCDDAT12>, <PIN_PC19__LCDDAT13>, <PIN_PC20__LCDDAT14>, <PIN_PC21__LCDDAT15>, <PIN_PC22__LCDDAT18>, <PIN_PC23__LCDDAT19>, <PIN_PC24__LCDDAT20>, <PIN_PC25__LCDDAT21>, <PIN_PC26__LCDDAT22>, <PIN_PC27__LCDDAT23>; bias-disable; }; pinctrl_macb0_phy_irq: macb0_phy_irq { pinmux = <PIN_PC9__GPIO>; bias-disable; }; pinctrl_macb0_rmii: macb0_rmii { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, <PIN_PB16__GRXDV>, <PIN_PB17__GRXER>, <PIN_PB18__GRX0>, <PIN_PB19__GRX1>, <PIN_PB20__GTX0>, <PIN_PB21__GTX1>, <PIN_PB22__GMDC>, <PIN_PB23__GMDIO>; bias-disable; }; pinctrl_qspi0_default: qspi0_default { pinmux = <PIN_PA22__QSPI0_SCK>, <PIN_PA23__QSPI0_CS>, <PIN_PA24__QSPI0_IO0>, <PIN_PA25__QSPI0_IO1>, <PIN_PA26__QSPI0_IO2>, <PIN_PA27__QSPI0_IO3>; bias-disable; }; pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default { pinmux = <PIN_PA1__SDMMC0_CMD>, <PIN_PA2__SDMMC0_DAT0>, <PIN_PA3__SDMMC0_DAT1>, <PIN_PA4__SDMMC0_DAT2>, <PIN_PA5__SDMMC0_DAT3>, <PIN_PA6__SDMMC0_DAT4>, <PIN_PA7__SDMMC0_DAT5>, <PIN_PA8__SDMMC0_DAT6>, <PIN_PA9__SDMMC0_DAT7>; bias-pull-up; u-boot,dm-pre-reloc; }; pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default { pinmux = <PIN_PA0__SDMMC0_CK>, <PIN_PA10__SDMMC0_RSTN>, <PIN_PA11__SDMMC0_VDDSEL>, <PIN_PA13__SDMMC0_CD>; bias-disable; u-boot,dm-pre-reloc; }; pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default { pinmux = <PIN_PA28__SDMMC1_CMD>, <PIN_PA18__SDMMC1_DAT0>, <PIN_PA19__SDMMC1_DAT1>, <PIN_PA20__SDMMC1_DAT2>, <PIN_PA21__SDMMC1_DAT3>; bias-pull-up; u-boot,dm-pre-reloc; }; pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default { pinmux = <PIN_PA22__SDMMC1_CK>, <PIN_PA30__SDMMC1_CD>; bias-disable; u-boot,dm-pre-reloc; }; pinctrl_spi0_default: spi0_default { pinmux = <PIN_PA14__SPI0_SPCK>, <PIN_PA15__SPI0_MOSI>, <PIN_PA16__SPI0_MISO>; bias-disable; u-boot,dm-pre-reloc; }; pinctrl_uart1_default: uart1_default { pinmux = <PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; bias-disable; u-boot,dm-pre-reloc; }; pinctrl_usb_default: usb_default { pinmux = <PIN_PB10__GPIO>; bias-disable; }; pinctrl_usba_vbus: usba_vbus { pinmux = <PIN_PA31__GPIO>; bias-disable; }; pinctrl_onewire_tm_default: onewire_tm_default { pinmux = <PIN_PB0__GPIO>; bias-pull-up; }; }; }; }; }; };