// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP ls2080a RDB board device tree source for QSPI-boot
 *
 * Author: Priyanka Jain <priyanka.jain@nxp.com>
 *
 * Copyright 2017 NXP
 */

/dts-v1/;

#include "fsl-ls2080a.dtsi"

/ {
	model = "Freescale Layerscape 2080a RDB Board";
	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";

	aliases {
		spi0 = &qspi;
		spi1 = &dspi;
	};
};

&dpmac1 {
	status = "okay";
	phy-handle = <&mdio1_phy1>;
	phy-connection-type = "xfi";
};

&dpmac2 {
	status = "okay";
	phy-handle = <&mdio1_phy2>;
	phy-connection-type = "xfi";
};

&dpmac3 {
	status = "okay";
	phy-handle = <&mdio1_phy3>;
	phy-connection-type = "xfi";
};

&dpmac4 {
	status = "okay";
	phy-handle = <&mdio1_phy4>;
	phy-connection-type = "xfi";
};

&dpmac5 {
	status = "okay";
	phy-handle = <&mdio2_phy1>;
	phy-connection-type = "xfi";
};

&dpmac6 {
	status = "okay";
	phy-handle = <&mdio2_phy2>;
	phy-connection-type = "xfi";
};

&dpmac7 {
	status = "okay";
	phy-handle = <&mdio2_phy3>;
	phy-connection-type = "xfi";
};

&dpmac8 {
	status = "okay";
	phy-handle = <&mdio2_phy4>;
	phy-connection-type = "xfi";
};

&emdio1 {
	status = "okay";

	/* CS4340 PHYs */
	mdio1_phy1: emdio1_phy@1 {
		reg = <0x10>;
	};
	mdio1_phy2: emdio1_phy@2 {
		reg = <0x11>;
	};
	mdio1_phy3: emdio1_phy@3 {
		reg = <0x12>;
	};
	mdio1_phy4: emdio1_phy@4 {
		reg = <0x13>;
	};
};

&emdio2 {
	status = "okay";

	/* AQR405 PHYs */
	mdio2_phy1: emdio2_phy@1 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x0>;
	};
	mdio2_phy2: emdio2_phy@2 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x1>;
	};
	mdio2_phy3: emdio2_phy@3 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x2>;
	};
	mdio2_phy4: emdio2_phy@4 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x3>;
	};
};

&dspi {
	bus-num = <0>;
	status = "okay";

	dflash0: n25q512a {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <3000000>;
		spi-cpol;
		spi-cpha;
		reg = <0>;
	};
};

&qspi {
	status = "okay";

	s25fs512s0: flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <0>;
	};

	s25fs512s1: flash@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <1>;
	};
};

&i2c0 {
	status = "okay";
	u-boot,dm-pre-reloc;

	pca9547@75 {
		compatible = "nxp,pca9547";
		reg = <0x75>;
		#address-cells = <1>;
		#size-cells = <0>;

		 i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x01>;
			rtc@68 {
				compatible = "dallas,ds3232";
				reg = <0x68>;
			};
		};
	};
};

&sata {
	status = "okay";
};