// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (C) 2019 MediaTek Inc.
 * Author: Mingming Lee <mingming.lee@mediatek.com>
 *
 */

#include <dt-bindings/clock/mt8518-clk.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	compatible = "mediatek,mt8518";
	interrupt-parent = <&sysirq>;
	#address-cells = <1>;
	#size-cells = <1>;



	topckgen: clock-controller@10000000 {
		compatible = "mediatek,mt8518-topckgen";
		reg = <0x10000000 0x1000>;
		#clock-cells = <1>;
	};

	gic: interrupt-controller@0c000000 {
		 compatible = "arm,gic-v3";
		#interrupt-cells = <3>;
		interrupt-parent = <&gic>;
		interrupt-controller;
		reg = <0xc000000 0x40000>,	/* GICD */
			  <0xc100000 0x200000>; /* GICR */
		interrupts = <GIC_PPI 9
			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	sysirq: interrupt-controller@10200a80 {
		compatible = "mediatek,sysirq";
		interrupt-controller;
		#interrupt-cells = <3>;
		interrupt-parent = <&gic>;
		reg = <0x10200a80 0x50>;
	};

	timer0: apxgpt@10008000 {
		compatible = "mediatek,timer";
		reg = <0x10008000 0x1000>;
		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
		clocks = <&topckgen CLK_TOP_CLK26M_D2>,
			 <&topckgen CLK_TOP_CLK32K>,
			 <&topckgen CLK_TOP_APXGPT>;
		clock-names = "clk13m",
			 "clk32k",
			 "bus";
	};

	watchdog0: watchdog@10007000 {
		compatible = "mediatek,wdt";
		reg = <0x10007000 0x1000>;
		interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>;
		#reset-cells = <1>;
		status = "disabled";
		timeout-sec = <60>;
		reset-on-timeout;
	};



	mmc0: mmc@11120000 {
		compatible = "mediatek,mt8516-mmc";
		reg = <0x11120000 0x1000>;
		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
		clocks = <&topckgen CLK_TOP_MSDC0>,
			<&topckgen CLK_TOP_MSDC0>,
			<&topckgen CLK_TOP_MSDC0_B>;
		clock-names = "source", "hclk", "source_cg";
		status = "disabled";
	};

	uart0: serial@11005000 {
		compatible = "mediatek,hsuart";
		reg = <0x11005000 0x1000>;
		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
		clocks = <&topckgen CLK_TOP_UART0_SEL>,
			<&topckgen CLK_TOP_UART0>;
		clock-names = "baud", "bus";
		status = "disabled";
	};

};