/* * (C) Copyright 2001 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <asm/ppc4xx.h> #include <asm/processor.h> /* * include common flash code (for esd boards) */ #include "../common/flash.c" /*----------------------------------------------------------------------- * Functions */ static ulong flash_get_size (vu_long *addr, flash_info_t *info); static void flash_get_offsets (ulong base, flash_info_t *info); /*----------------------------------------------------------------------- */ unsigned long flash_init (void) { unsigned long size_b0; int i; uint pbcr; unsigned long base_b0; /* Init: no FLASHes known */ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } /* Static FLASH Bank configuration here - FIXME XXX */ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN) { printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size_b0, size_b0<<20); } /* Setup offsets */ flash_get_offsets (-size_b0, &flash_info[0]); /* Re-do sizing to get full correct info */ mtdcr(EBC0_CFGADDR, PB0CR); pbcr = mfdcr(EBC0_CFGDATA); mtdcr(EBC0_CFGADDR, PB0CR); base_b0 = -size_b0; pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); mtdcr(EBC0_CFGDATA, pbcr); /* printf("PB1CR = %x\n", pbcr); */ /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, -monitor_flash_len, 0xffffffff, &flash_info[0]); flash_info[0].size = size_b0; return (size_b0); }