# DONT FORGET TO CHANGE THE "version" VAR BELOW IF YOU MAKE CHANGES TO THIS FILE # (C) Copyright 2001 # Murray Jensen, CSIRO-MIT, # # See file CREDITS for list of people who contributed to this # project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # # global_env # # file used by Hymod boards to initialise the u-boot non-volatile # environment when u-boot is first run (it determines this by the # absence of the environment variable "global_env_loaded") # # format of this file is: # # 1. blank lines and lines beginning with '#' are ignored # 2. all other lines must have the form = # 3. if a percent appears anywhere, it is replaced like so: # # %s serial number of the main board (10 digit zero filled) # %S serial number of the main board (plain number) # %% a percentage character # ... otherwise the %x is discarded # # if first character in is a dash ('-'), then an existing env var # will not be overwritten (the dash is removed). i.e. it is only set if # it does not exist # # if last character in is a plus ('+'), then will be appended # to any existing env var (the plus is ignored). Duplicates of are # removed. # # similarly, if the last character in is a minus ('-'), then any # occurences of in the current value of will removed (the # minus is ignored). # # leading and trailing whitespace is removed in both and # (after processing any initial or final plus/minus in ). # # MISCELLANEOUS PARAMETERS # version must always come first version=3 # set the ip address based on the main board serial number ipaddr=192.168.1.%S serverip=192.168.1.254 # stop auto execute after tftp (not a very good name really) autostart=no # setting this to "yes" forces the global_env file to be loaded and processed # if the current version is different to the version in the file always_check_env=no # BOOTING COMMANDS AND PARAMETERS # command to run when "auto-booting" bootcmd=bootm 40080000 40200000 # how long the "countdown" to automatically running "bootcmd" is bootdelay=2 # how long before it "times out" console input and attempts to run "bootcmd" bootretry=5 # arguments passed to the boot program (i.e. linux kernel) via register 6 # the linux kernel (v2.4) uses the following registers: # r3 - address of board information structure # r4 - address of initial ramdisk image (0 means no initrd) # r5 - size of initial ramdisk image # r6 - address of command line string -bootargs=root=/dev/ram rw # these four are for hymod linux intergrated into our Sun network bootargs+=serialno=%S bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4 bootargs+=nfsclient bootargs+=automount # start a web server by default bootargs+=webserver # give negotiation time to finish bootargs+=netsleep=5 # then our ciscos don't pass packets for 25-30 secs after that, so # pinging the server until it responds prevents network connections # from failing... bootargs+=netping # these are old bootargs - we don't need them anymore bootargs-=preload=unix,i2c-cpm,i2c-dev bootargs-=ramdisk_size=32768 bootargs-=ramdisk_size=24576 # FLASH MANIPULATION COMMANDS # # 16M flash, 64 x 256K sectors, mapped at address 0x40000000 # # Sector(s) Address Size Description # # 0 - 0 0x40000000 256K boot code # 1 - 1 0x40040000 256K non volatile environment # 2 - 4 0x40080000 768K linux kernel image # 5 - 7 0x40140000 768K alternate linux kernel image # 8 - 47 0x40200000 10M linux initial ramdisk image # 48 - 63 0x40c00000 4M ramdisk image for applications # fetchboot=tftp 100000 /hymod/u-boot.bin eraseboot=protect off 1:0 ; erase 1:0 ; protect on 1:0 copyboot=protect off 1:0 ; cp.b 100000 40000000 40000 ; protect on 1:0 cmpboot=cmp.b 100000 40000000 40000 newboot=run fetchboot eraseboot copyboot cmpboot fetchlinux=tftp 100000 /hymod/linux.bin eraselinux=erase 1:2-4 copylinux=cp.b 100000 40080000 $(filesize) cmplinux=cmp.b 100000 40080000 $(filesize) newlinux=run fetchlinux eraselinux copylinux cmplinux fetchaltlinux=tftp 100000 /hymod/altlinux.bin erasealtlinux=erase 1:5-7 copyaltlinux=cp.b 100000 40140000 $(filesize) cmpaltlinux=cmp.b 100000 40140000 $(filesize) newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux fetchird=tftp 100000 /hymod/initrd.bin eraseird=erase 1:8-47 copyird=cp.b 100000 40200000 $(filesize) cmpird=cmp.b 100000 40200000 $(filesize) newinitrd=run fetchird eraseird copyird cmpird fetchard=tftp 100000 /hymod/apprd.bin eraseard=erase 1:48-63 copyard=cp.b 100000 40c00000 $(filesize) cmpard=cmp.b 100000 40c00000 $(filesize) newapprd=run fetchard eraseard copyard cmpard