/* * (C) Copyright 2007 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include "mt48lc16m16a2-75.h" #ifndef CONFIG_SYS_RAMBOOT static void sdram_start (int hi_addr) { long hi_addr_bit = hi_addr ? 0x01000000 : 0; /* unlock mode register */ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; __asm__ volatile ("sync"); /* precharge all banks */ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; __asm__ volatile ("sync"); #if SDRAM_DDR /* set mode register: extended mode */ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; __asm__ volatile ("sync"); /* set mode register: reset DLL */ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; __asm__ volatile ("sync"); #endif /* precharge all banks */ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; __asm__ volatile ("sync"); /* auto refresh */ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; __asm__ volatile ("sync"); /* set mode register */ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; __asm__ volatile ("sync"); /* normal operation */ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; __asm__ volatile ("sync"); } #endif /* * ATTENTION: Although partially referenced initdram does NOT make real use * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE * is something else than 0x00000000. */ phys_size_t initdram(void) { ulong dramsize = 0; ulong dramsize2 = 0; #ifndef CONFIG_SYS_RAMBOOT ulong test1, test2; /* setup SDRAM chip selects */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001b;/* 256MB at 0x0 */ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x10000000;/* disabled */ __asm__ volatile ("sync"); /* setup config registers */ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; __asm__ volatile ("sync"); #if SDRAM_DDR && SDRAM_TAPDELAY /* set tap delay */ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; __asm__ volatile ("sync"); #endif /* find RAM size using SDRAM CS0 only */ sdram_start(0); test1 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000); sdram_start(1); test2 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000); if (test1 > test2) { sdram_start(0); dramsize = test1; } else { dramsize = test2; } /* memory smaller than 1MB is impossible */ if (dramsize < (1 << 20)) { dramsize = 0; } /* set SDRAM CS0 size according to the amount of RAM found */ if (dramsize > 0) { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; } else { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ } #else /* CONFIG_SYS_RAMBOOT */ /* retrieve size of memory connected to SDRAM CS0 */ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; if (dramsize >= 0x13) { dramsize = (1 << (dramsize - 0x13)) << 20; } else { dramsize = 0; } /* retrieve size of memory connected to SDRAM CS1 */ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; if (dramsize2 >= 0x13) { dramsize2 = (1 << (dramsize2 - 0x13)) << 20; } else { dramsize2 = 0; } #endif /* CONFIG_SYS_RAMBOOT */ return dramsize + dramsize2; } int checkboard (void) { puts ("Board: MUNICes\n"); return 0; } #ifdef CONFIG_PCI static struct pci_controller hose; extern void pci_mpc5xxx_init(struct pci_controller *); void pci_init_board(void) { pci_mpc5xxx_init(&hose); } #endif #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } #endif /* CONFIG_OF_BOARD_SETUP */