/* * board/renesas/salvator-x/salvator-x.c * This file is Salvator-X board support. * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2015 Nobuhiro Iwamatsu * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #define CPGWPCR 0xE6150904 #define CPGWPR 0xE615090C #define CLK2MHZ(clk) (clk / 1000 / 1000) void s_init(void) { struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; /* Watchdog init */ writel(0xA5A5A500, &rwdt->rwtcsra); writel(0xA5A5A500, &swdt->swtcsra); writel(0xA5A50000, CPGWPCR); writel(0xFFFFFFFF, CPGWPR); } #define GSX_MSTP112 BIT(12) /* 3DG */ #define TMU0_MSTP125 BIT(25) /* secure */ #define TMU1_MSTP124 BIT(24) /* non-secure */ #define SCIF2_MSTP310 BIT(10) /* SCIF2 */ int board_early_init_f(void) { /* TMU0,1 */ /* which use ? */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124); /* SCIF2 */ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310); return 0; } /* SYSC */ /* R/- 32 Power status register 2(3DG) */ #define SYSC_PWRSR2 0xE6180100 /* -/W 32 Power resume control register 2 (3DG) */ #define SYSC_PWRONCR2 0xE618010C DECLARE_GLOBAL_DATA_PTR; int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; /* Init PFC controller */ r8a7795_pinmux_init(); /* GSX: force power and clock supply */ writel(0x0000001F, SYSC_PWRONCR2); while (readl(SYSC_PWRSR2) != 0x000003E0) mdelay(20); mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112); return 0; } int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; } const struct rmobile_sysinfo sysinfo = { CONFIG_RCAR_BOARD_STRING }; #define RST_BASE 0xE6160000 #define RST_CA57RESCNT (RST_BASE + 0x40) #define RST_CA53RESCNT (RST_BASE + 0x44) #define RST_RSTOUTCR (RST_BASE + 0x58) #define RST_CODE 0xA5A5000F void reset_cpu(ulong addr) { /* only CA57 ? */ writel(RST_CODE, RST_CA57RESCNT); } static const struct sh_serial_platdata serial_platdata = { .base = SCIF2_BASE, .type = PORT_SCIF, .clk = 14745600, /* 0xE10000 */ .clk_mode = EXT_CLK, }; U_BOOT_DEVICE(salvator_x_scif2) = { .name = "serial_sh", .platdata = &serial_platdata, };