menu "SPI Support" config DM_SPI bool "Enable Driver Model for SPI drivers" depends on DM help Enable driver model for SPI. The SPI slave interface (spi_setup_slave(), spi_xfer(), etc.) is then implemented by the SPI uclass. Drivers provide methods to access the SPI buses that they control. The uclass interface is defined in include/spi.h. The existing spi_slave structure is attached as 'parent data' to every slave on each bus. Slaves typically use driver-private data instead of extending the spi_slave structure. if DM_SPI config ALTERA_SPI bool "Altera SPI driver" help Enable the Altera SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Altera IP core. Please find details on the "Embedded Peripherals IP User Guide" of Altera. config ATH79_SPI bool "Atheros SPI driver" depends on ARCH_ATH79 help Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used to access SPI NOR flash and other SPI peripherals. This driver uses driver model and requires a device tree binding to operate. please refer to doc/device-tree-bindings/spi/spi-ath79.txt. config ATMEL_SPI bool "Atmel SPI driver" depends on ARCH_AT91 help This enables driver for the Atmel SPI Controller, present on many AT91 (ARM) chips. This driver can be used to access the SPI Flash, such as AT25DF321. config BCM63XX_HSSPI bool "BCM63XX HSSPI driver" depends on ARCH_BMIPS help Enable the BCM6328 HSSPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Broadcom SPI core. config BCM63XX_SPI bool "BCM6348 SPI driver" depends on ARCH_BMIPS help Enable the BCM6348/BCM6358 SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding these Broadcom SPI cores. config CADENCE_QSPI bool "Cadence QSPI driver" help Enable the Cadence Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Cadence IP core. config DESIGNWARE_SPI bool "Designware SPI driver" help Enable the Designware SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Designware IP core. config EXYNOS_SPI bool "Samsung Exynos SPI driver" help Enable the Samsung Exynos SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Samsung Exynos IP core. config FSL_DSPI bool "Freescale DSPI driver" help Enable the Freescale DSPI driver. This driver can be used to access the SPI NOR flash and SPI Data flash on platforms embedding this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms use this driver. config ICH_SPI bool "Intel ICH SPI driver" help Enable the Intel ICH SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Intel ICH IP core. config MVEBU_A3700_SPI bool "Marvell Armada 3700 SPI driver" help Enable the Marvell Armada 3700 SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Marvell IP core. config PIC32_SPI bool "Microchip PIC32 SPI driver" depends on MACH_PIC32 help Enable the Microchip PIC32 SPI driver. This driver can be used to access the SPI NOR flash, MMC-over-SPI on platforms based on Microchip PIC32 family devices. config ROCKCHIP_SPI bool "Rockchip SPI driver" help Enable the Rockchip SPI driver, used to access SPI NOR flash and other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs. This uses driver model and requires a device tree binding to operate. config SANDBOX_SPI bool "Sandbox SPI driver" depends on SANDBOX && DM help Enable SPI support for sandbox. This is an emulation of a real SPI bus. Devices can be attached to the bus using the device tree which specifies the driver to use. As an example, see this device tree fragment from sandbox.dts. It shows that the SPI bus has a single flash device on chip select 0 which is emulated by the driver for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c. spi@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; compatible = "sandbox,spi"; cs-gpios = <0>, <&gpio_a 0>; flash@0 { reg = <0>; compatible = "spansion,m25p16", "sandbox,spi-flash"; spi-max-frequency = <40000000>; sandbox,filename = "spi.bin"; }; }; config STM32_QSPI bool "STM32F7 QSPI driver" depends on STM32F7 help Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash chips on platforms embedding this ST IP core. config TEGRA114_SPI bool "nVidia Tegra114 SPI driver" help Enable the nVidia Tegra114 SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this nVidia Tegra114 IP core. This controller is different than the older SoCs SPI controller and also register interface get changed with this controller. config TEGRA20_SFLASH bool "nVidia Tegra20 Serial Flash controller driver" help Enable the nVidia Tegra20 Serial Flash controller driver. This driver can be used to access the SPI NOR flash on platforms embedding this nVidia Tegra20 IP core. config TEGRA20_SLINK bool "nVidia Tegra20/Tegra30 SLINK driver" help Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can be used to access the SPI NOR flash on platforms embedding this nVidia Tegra20/Tegra30 IP cores. config TEGRA210_QSPI bool "nVidia Tegra210 QSPI driver" help Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver be used to access SPI chips on platforms embedding this NVIDIA Tegra210 IP core. config XILINX_SPI bool "Xilinx SPI driver" help Enable the Xilinx SPI driver from the Xilinx EDK. This SPI controller support 8 bit SPI transfers only, with or w/o FIFO. For more info on Xilinx SPI Register Definitions and Overview see driver file - drivers/spi/xilinx_spi.c config ZYNQ_SPI bool "Zynq SPI driver" depends on ARCH_ZYNQ || ARCH_ZYNQMP help Enable the Zynq SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Zynq SPI IP core. config ZYNQ_QSPI bool "Zynq QSPI driver" depends on ARCH_ZYNQ help Enable the Zynq Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Zynq QSPI IP core. This IP is used to connect the flash in 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel. endif # if DM_SPI config SOFT_SPI bool "Soft SPI driver" help Enable Soft SPI driver. This driver is to use GPIO simulate the SPI protocol. config FSL_ESPI bool "Freescale eSPI driver" help Enable the Freescale eSPI driver. This driver can be used to access the SPI interface and SPI NOR flash on platforms embedding this Freescale eSPI IP core. config FSL_QSPI bool "Freescale QSPI driver" help Enable the Freescale Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Freescale IP core. config ATCSPI200_SPI bool "Andestech ATCSPI200 SPI driver" help Enable the Andestech ATCSPI200 SPI driver. This driver can be used to access the SPI flash on AE3XX and AE250 platforms embedding this Andestech IP core. config DAVINCI_SPI bool "Davinci & Keystone SPI driver" depends on ARCH_DAVINCI || ARCH_KEYSTONE help Enable the Davinci SPI driver config SH_SPI bool "SuperH SPI driver" help Enable the SuperH SPI controller driver. This driver can be used on various SuperH SoCs, such as SH7757. config SH_QSPI bool "Renesas Quad SPI driver" help Enable the Renesas Quad SPI controller driver. This driver can be used on Renesas SoCs. config TI_QSPI bool "TI QSPI driver" help Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. This driver support spi flash single, quad and memory reads. config LPC32XX_SSP bool "LPC32XX SPI Driver" help Enable support for SPI on LPC32xx config MPC8XX_SPI bool "MPC8XX SPI Driver" depends on 8xx help Enable support for SPI on MPC8XX config MPC8XXX_SPI bool "MPC8XXX SPI Driver" help Enable support for SPI on the MPC8XXX PowerPC SoCs. config MXC_SPI bool "MXC SPI Driver" help Enable the MXC SPI controller driver. This driver can be used on various i.MX SoCs such as i.MX31/35/51/6/7. config MXS_SPI bool "MXS SPI Driver" help Enable the MXS SPI controller driver. This driver can be used on the i.MX23 and i.MX28 SoCs. config OMAP3_SPI bool "McSPI driver for OMAP" help SPI master controller for OMAP24XX and later Multichannel SPI (McSPI). This driver be used to access SPI chips on platforms embedding this OMAP3 McSPI IP core. endmenu # menu "SPI Support"