/* linux/arch/arm/plat-s3c/include/plat/regs-otg.h * * Copyright (C) 2004 Herbert Poetzl * * Registers remapping: * Lukasz Majewski * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __ASM_ARCH_REGS_USB_OTG_HS_H #define __ASM_ARCH_REGS_USB_OTG_HS_H /* USB2.0 OTG Controller register */ struct dwc2_usbotg_phy { u32 phypwr; u32 phyclk; u32 rstcon; }; /* Device Logical IN Endpoint-Specific Registers */ struct s3c_dev_in_endp { u32 diepctl; u8 res1[4]; u32 diepint; u8 res2[4]; u32 dieptsiz; u32 diepdma; u8 res3[4]; u32 diepdmab; }; /* Device Logical OUT Endpoint-Specific Registers */ struct s3c_dev_out_endp { u32 doepctl; u8 res1[4]; u32 doepint; u8 res2[4]; u32 doeptsiz; u32 doepdma; u8 res3[4]; u32 doepdmab; }; struct ep_fifo { u32 fifo; u8 res[4092]; }; /* USB2.0 OTG Controller register */ struct dwc2_usbotg_reg { /* Core Global Registers */ u32 gotgctl; /* OTG Control & Status */ u32 gotgint; /* OTG Interrupt */ u32 gahbcfg; /* Core AHB Configuration */ u32 gusbcfg; /* Core USB Configuration */ u32 grstctl; /* Core Reset */ u32 gintsts; /* Core Interrupt */ u32 gintmsk; /* Core Interrupt Mask */ u32 grxstsr; /* Receive Status Debug Read/Status Read */ u32 grxstsp; /* Receive Status Debug Pop/Status Pop */ u32 grxfsiz; /* Receive FIFO Size */ u32 gnptxfsiz; /* Non-Periodic Transmit FIFO Size */ u8 res1[216]; u32 dieptxf[15]; /* Device Periodic Transmit FIFO size register */ u8 res2[1728]; /* Device Configuration */ u32 dcfg; /* Device Configuration Register */ u32 dctl; /* Device Control */ u32 dsts; /* Device Status */ u8 res3[4]; u32 diepmsk; /* Device IN Endpoint Common Interrupt Mask */ u32 doepmsk; /* Device OUT Endpoint Common Interrupt Mask */ u32 daint; /* Device All Endpoints Interrupt */ u32 daintmsk; /* Device All Endpoints Interrupt Mask */ u8 res4[224]; struct s3c_dev_in_endp in_endp[16]; struct s3c_dev_out_endp out_endp[16]; u8 res5[768]; struct ep_fifo ep[16]; }; /*===================================================================== */ /*definitions related to CSR setting */ /* S3C_UDC_OTG_GOTGCTL */ #define B_SESSION_VALID (0x1<<19) #define A_SESSION_VALID (0x1<<18) /* S3C_UDC_OTG_GAHBCFG */ #define PTXFE_HALF (0<<8) #define PTXFE_ZERO (1<<8) #define NPTXFE_HALF (0<<7) #define NPTXFE_ZERO (1<<7) #define MODE_SLAVE (0<<5) #define MODE_DMA (1<<5) #define BURST_SINGLE (0<<1) #define BURST_INCR (1<<1) #define BURST_INCR4 (3<<1) #define BURST_INCR8 (5<<1) #define BURST_INCR16 (7<<1) #define GBL_INT_UNMASK (1<<0) #define GBL_INT_MASK (0<<0) /* S3C_UDC_OTG_GRSTCTL */ #define AHB_MASTER_IDLE (1u<<31) #define CORE_SOFT_RESET (0x1<<0) /* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */ #define INT_RESUME (1u<<31) #define INT_DISCONN (0x1<<29) #define INT_CONN_ID_STS_CNG (0x1<<28) #define INT_OUT_EP (0x1<<19) #define INT_IN_EP (0x1<<18) #define INT_ENUMDONE (0x1<<13) #define INT_RESET (0x1<<12) #define INT_SUSPEND (0x1<<11) #define INT_EARLY_SUSPEND (0x1<<10) #define INT_NP_TX_FIFO_EMPTY (0x1<<5) #define INT_RX_FIFO_NOT_EMPTY (0x1<<4) #define INT_SOF (0x1<<3) #define INT_DEV_MODE (0x0<<0) #define INT_HOST_MODE (0x1<<1) #define INT_GOUTNakEff (0x01<<7) #define INT_GINNakEff (0x01<<6) #define FULL_SPEED_CONTROL_PKT_SIZE 8 #define FULL_SPEED_BULK_PKT_SIZE 64 #define HIGH_SPEED_CONTROL_PKT_SIZE 64 #define HIGH_SPEED_BULK_PKT_SIZE 512 #define RX_FIFO_SIZE (1024*4) #define NPTX_FIFO_SIZE (1024*4) #define PTX_FIFO_SIZE (1536*1) #define DEPCTL_TXFNUM_0 (0x0<<22) #define DEPCTL_TXFNUM_1 (0x1<<22) #define DEPCTL_TXFNUM_2 (0x2<<22) #define DEPCTL_TXFNUM_3 (0x3<<22) #define DEPCTL_TXFNUM_4 (0x4<<22) /* Enumeration speed */ #define USB_HIGH_30_60MHZ (0x0<<1) #define USB_FULL_30_60MHZ (0x1<<1) #define USB_LOW_6MHZ (0x2<<1) #define USB_FULL_48MHZ (0x3<<1) /* S3C_UDC_OTG_GRXSTSP STATUS */ #define OUT_PKT_RECEIVED (0x2<<17) #define OUT_TRANSFER_COMPLELTED (0x3<<17) #define SETUP_TRANSACTION_COMPLETED (0x4<<17) #define SETUP_PKT_RECEIVED (0x6<<17) #define GLOBAL_OUT_NAK (0x1<<17) /* S3C_UDC_OTG_DCTL device control register */ #define NORMAL_OPERATION (0x1<<0) #define SOFT_DISCONNECT (0x1<<1) /* S3C_UDC_OTG_DAINT device all endpoint interrupt register */ #define DAINT_OUT_BIT (16) #define DAINT_MASK (0xFFFF) /* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device control IN/OUT endpoint 0 control register */ #define DEPCTL_EPENA (0x1<<31) #define DEPCTL_EPDIS (0x1<<30) #define DEPCTL_SETD1PID (0x1<<29) #define DEPCTL_SETD0PID (0x1<<28) #define DEPCTL_SNAK (0x1<<27) #define DEPCTL_CNAK (0x1<<26) #define DEPCTL_STALL (0x1<<21) #define DEPCTL_TYPE_BIT (18) #define DEPCTL_TYPE_MASK (0x3<<18) #define DEPCTL_CTRL_TYPE (0x0<<18) #define DEPCTL_ISO_TYPE (0x1<<18) #define DEPCTL_BULK_TYPE (0x2<<18) #define DEPCTL_INTR_TYPE (0x3<<18) #define DEPCTL_USBACTEP (0x1<<15) #define DEPCTL_NEXT_EP_BIT (11) #define DEPCTL_MPS_BIT (0) #define DEPCTL_MPS_MASK (0x7FF) #define DEPCTL0_MPS_64 (0x0<<0) #define DEPCTL0_MPS_32 (0x1<<0) #define DEPCTL0_MPS_16 (0x2<<0) #define DEPCTL0_MPS_8 (0x3<<0) #define DEPCTL_MPS_BULK_512 (512<<0) #define DEPCTL_MPS_INT_MPS_16 (16<<0) #define DIEPCTL0_NEXT_EP_BIT (11) /* S3C_UDC_OTG_DIEPMSK/DOEPMSK device IN/OUT endpoint common interrupt mask register */ /* S3C_UDC_OTG_DIEPINTn/DOEPINTn device IN/OUT endpoint interrupt register */ #define BACK2BACK_SETUP_RECEIVED (0x1<<6) #define INTKNEPMIS (0x1<<5) #define INTKN_TXFEMP (0x1<<4) #define NON_ISO_IN_EP_TIMEOUT (0x1<<3) #define CTRL_OUT_EP_SETUP_PHASE_DONE (0x1<<3) #define AHB_ERROR (0x1<<2) #define EPDISBLD (0x1<<1) #define TRANSFER_DONE (0x1<<0) #define USB_PHY_CTRL_EN0 (0x1 << 0) /* OPHYPWR */ #define PHY_0_SLEEP (0x1 << 5) #define OTG_DISABLE_0 (0x1 << 4) #define ANALOG_PWRDOWN (0x1 << 3) #define FORCE_SUSPEND_0 (0x1 << 0) /* URSTCON */ #define HOST_SW_RST (0x1 << 4) #define PHY_SW_RST1 (0x1 << 3) #define PHYLNK_SW_RST (0x1 << 2) #define LINK_SW_RST (0x1 << 1) #define PHY_SW_RST0 (0x1 << 0) /* OPHYCLK */ #define COMMON_ON_N1 (0x1 << 7) #define COMMON_ON_N0 (0x1 << 4) #define ID_PULLUP0 (0x1 << 2) #define CLK_SEL_24MHZ (0x3 << 0) #define CLK_SEL_12MHZ (0x2 << 0) #define CLK_SEL_48MHZ (0x0 << 0) #define EXYNOS4X12_ID_PULLUP0 (0x01 << 3) #define EXYNOS4X12_COMMON_ON_N0 (0x01 << 4) #define EXYNOS4X12_CLK_SEL_12MHZ (0x02 << 0) #define EXYNOS4X12_CLK_SEL_24MHZ (0x05 << 0) /* Device Configuration Register DCFG */ #define DEV_SPEED_HIGH_SPEED_20 (0x0 << 0) #define DEV_SPEED_FULL_SPEED_20 (0x1 << 0) #define DEV_SPEED_LOW_SPEED_11 (0x2 << 0) #define DEV_SPEED_FULL_SPEED_11 (0x3 << 0) #define EP_MISS_CNT(x) (x << 18) #define DEVICE_ADDRESS(x) (x << 4) /* Core Reset Register (GRSTCTL) */ #define TX_FIFO_FLUSH (0x1 << 5) #define RX_FIFO_FLUSH (0x1 << 4) #define TX_FIFO_NUMBER(x) (x << 6) #define TX_FIFO_FLUSH_ALL TX_FIFO_NUMBER(0x10) /* Masks definitions */ #define GINTMSK_INIT (INT_OUT_EP | INT_IN_EP | INT_RESUME | INT_ENUMDONE\ | INT_RESET | INT_SUSPEND) #define DOEPMSK_INIT (CTRL_OUT_EP_SETUP_PHASE_DONE | AHB_ERROR|TRANSFER_DONE) #define DIEPMSK_INIT (NON_ISO_IN_EP_TIMEOUT|AHB_ERROR|TRANSFER_DONE) #define GAHBCFG_INIT (PTXFE_HALF | NPTXFE_HALF | MODE_DMA | BURST_INCR4\ | GBL_INT_UNMASK) /* Device Endpoint X Transfer Size Register (DIEPTSIZX) */ #define DIEPT_SIZ_PKT_CNT(x) (x << 19) #define DIEPT_SIZ_XFER_SIZE(x) (x << 0) /* Device OUT Endpoint X Transfer Size Register (DOEPTSIZX) */ #define DOEPT_SIZ_PKT_CNT(x) (x << 19) #define DOEPT_SIZ_XFER_SIZE(x) (x << 0) #define DOEPT_SIZ_XFER_SIZE_MAX_EP0 (0x7F << 0) #define DOEPT_SIZ_XFER_SIZE_MAX_EP (0x7FFF << 0) /* Device Endpoint-N Control Register (DIEPCTLn/DOEPCTLn) */ #define DIEPCTL_TX_FIFO_NUM(x) (x << 22) #define DIEPCTL_TX_FIFO_NUM_MASK (~DIEPCTL_TX_FIFO_NUM(0xF)) /* Device ALL Endpoints Interrupt Register (DAINT) */ #define DAINT_IN_EP_INT(x) (x << 0) #define DAINT_OUT_EP_INT(x) (x << 16) #endif