/* * pcm051.h * * Phytec phyCORE-AM335x (pcm051) boards information header * * Copyright (C) 2013 Lemonage Software GmbH * Author Lars Poeschel * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. * * This program is distributed "as is" WITHOUT ANY WARRANTY of any * kind, whether express or implied; without even the implied warranty * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef __CONFIG_PCM051_H #define __CONFIG_PCM051_H #include #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_MACH_TYPE MACH_TYPE_PCM051 /* set to negative value for no autoboot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80007fc0\0" \ "fdtaddr=0x80000000\0" \ "rdaddr=0x81000000\0" \ "bootfile=uImage\0" \ "fdtfile=pcm051.dtb\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "bootenv=uEnv.txt\0" \ "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ "rootfstype=${ramrootfstype}\0" \ "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootscript; then " \ "run bootscript;" \ "else " \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ "run importbootenv;" \ "fi;" \ "if test -n $uenvcmd; then " \ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ "if run loaduimage; then " \ "run mmcboot;" \ "fi;" \ "fi ;" \ "fi;" \ /* Clock Defines */ #define V_OSCK 25000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) /* * memtest works on 8 MB in DRAM after skipping 32MB from * start addr of ram disk */ #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (64 << 20)) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + (8 * 1024 * 1024)) #define CONFIG_SF_DEFAULT_SPEED 24000000 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ /* I2C Configuration */ #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } /* CPU */ #ifdef CONFIG_SPI_BOOT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #endif /* * USB configuration */ #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST #define CONFIG_PHY_SMSC #endif /* ! __CONFIG_PCM051_H */