/* * Copyright (C) 2012 Altera Corporation * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_SOCFPGA_COMMON_H__ #define __CONFIG_SOCFPGA_COMMON_H__ /* Virtual target or real hardware */ #undef CONFIG_SOCFPGA_VIRTUAL_TARGET /* * High level configuration */ #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_CLOCKS #define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024) #define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* add target to build it automatically upon "make" */ #define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp" /* * Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x0 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE #if defined(CONFIG_TARGET_SOCFPGA_GEN5) #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) #define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 #define CONFIG_SYS_INIT_RAM_SIZE 0x40000 /* 256KB */ #endif #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_SYS_TEXT_BASE 0x08000040 #else #define CONFIG_SYS_TEXT_BASE 0x01000040 #endif /* * U-Boot general configurations */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ /* Print buffer size */ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */ #define CONFIG_AUTO_COMPLETE /* Command auto complete */ #define CONFIG_CMDLINE_EDITING /* Command history etc */ #ifndef CONFIG_SYS_HOSTNAME #define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD #endif #define CONFIG_CMD_PXE #define CONFIG_MENU /* * Cache */ #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS /* * EPCS/EPCQx1 Serial Flash Controller */ #ifdef CONFIG_ALTERA_SPI #define CONFIG_SF_DEFAULT_SPEED 30000000 /* * The base address is configurable in QSys, each board must specify the * base address based on it's particular FPGA configuration. Please note * that the address here is incremented by 0x400 from the Base address * selected in QSys, since the SPI registers are at offset +0x400. * #define CONFIG_SYS_SPI_BASE 0xff240400 */ #endif /* * Ethernet on SoC (EMAC) */ #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_MII #endif /* * FPGA Driver */ #ifdef CONFIG_CMD_FPGA #define CONFIG_FPGA_COUNT 1 #endif /* * L4 OSC1 Timer 0 */ /* This timer uses eosc1, whose clock frequency is fixed at any condition. */ #define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_SYS_TIMER_RATE 2400000 #else #define CONFIG_SYS_TIMER_RATE 25000000 #endif /* * L4 Watchdog */ #ifdef CONFIG_HW_WATCHDOG #define CONFIG_DESIGNWARE_WATCHDOG #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS #define CONFIG_DW_WDT_CLOCK_KHZ 25000 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 #endif /* * MMC Driver */ #ifdef CONFIG_CMD_MMC #define CONFIG_BOUNCE_BUFFER /* FIXME */ /* using smaller max blk cnt to avoid flooding the limited stack we have */ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */ #endif /* * NAND Support */ #ifdef CONFIG_NAND_DENALI #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_REGS_BASE SOCFPGA_NANDREGS_ADDRESS #define CONFIG_SYS_NAND_DATA_BASE SOCFPGA_NANDDATA_ADDRESS #endif /* * I2C support */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS #define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS #define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS #define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS /* Using standard mode which the speed up to 100Kb/s */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SPEED1 100000 #define CONFIG_SYS_I2C_SPEED2 100000 #define CONFIG_SYS_I2C_SPEED3 100000 /* Address of device when used as slave */ #define CONFIG_SYS_I2C_SLAVE 0x02 #define CONFIG_SYS_I2C_SLAVE1 0x02 #define CONFIG_SYS_I2C_SLAVE2 0x02 #define CONFIG_SYS_I2C_SLAVE3 0x02 #ifndef __ASSEMBLY__ /* Clock supplied to I2C controller in unit of MHz */ unsigned int cm_get_l4_sp_clk_hz(void); #define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000) #endif /* * QSPI support */ /* Enable multiple SPI NOR flash manufacturers */ #ifndef CONFIG_SPL_BUILD #define CONFIG_SPI_FLASH_MTD #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #endif /* QSPI reference clock */ #ifndef __ASSEMBLY__ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() #endif /* * Designware SPI support */ /* * Serial Driver */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_SYS_NS16550_CLK 1000000 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5) #define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS #define CONFIG_SYS_NS16550_CLK 100000000 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) #define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART1_ADDRESS #define CONFIG_SYS_NS16550_CLK 50000000 #endif #define CONFIG_CONS_INDEX 1 /* * USB */ /* * USB Gadget (DFU, UMS) */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_SYS_DFU_DATA_BUF_SIZE (16 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB IDs */ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif /* * U-Boot environment */ #if !defined(CONFIG_ENV_SIZE) #define CONFIG_ENV_SIZE (8 * 1024) #endif /* Environment for SDMMC boot */ #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET) #define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ #define CONFIG_ENV_OFFSET (34 * 512) /* just after the GPT */ #endif /* Environment for QSPI boot */ #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET) #define CONFIG_ENV_OFFSET 0x00100000 #define CONFIG_ENV_SECT_SIZE (64 * 1024) #endif /* * mtd partitioning for serial NOR flash * * device nor0 , # parts = 6 * #: name size offset mask_flags * 0: u-boot 0x00100000 0x00000000 0 * 1: env1 0x00040000 0x00100000 0 * 2: env2 0x00040000 0x00140000 0 * 3: UBI 0x03e80000 0x00180000 0 * 4: boot 0x00e80000 0x00180000 0 * 5: rootfs 0x01000000 0x01000000 0 * */ /* * SPL * * SRAM Memory layout: * * 0xFFFF_0000 ...... Start of SRAM * 0xFFFF_xxxx ...... Top of stack (grows down) * 0xFFFF_yyyy ...... Malloc area * 0xFFFF_zzzz ...... Global Data * 0xFFFF_FF00 ...... End of SRAM */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #endif #else #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #endif #endif /* SPL QSPI boot support */ #ifdef CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #endif /* SPL NAND boot support */ #ifdef CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 #endif /* * Stack setup */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR /* Extra Environment */ #ifndef CONFIG_SPL_BUILD #include #ifdef CONFIG_CMD_PXE #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) #else #define BOOT_TARGET_DEVICES_PXE(func) #endif #ifdef CONFIG_CMD_MMC #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) #else #define BOOT_TARGET_DEVICES_MMC(func) #endif #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_PXE(func) \ func(DHCP, dhcp, na) #include #ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "bootm_size=0xa000000\0" \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ "fdt_addr_r=0x02000000\0" \ "scriptaddr=0x02100000\0" \ "pxefile_addr_r=0x02200000\0" \ "ramdisk_addr_r=0x02300000\0" \ BOOTENV #endif #endif #endif /* __CONFIG_SOCFPGA_COMMON_H__ */