Instrument.git - The instrument daemon

Age	Commit message (Expand)	Author
2000-01-01	version bumpINSTRUMENT_6_4_21	Mike
2020-07-27	add support for new jig pin on keypad 104G	Michael J. Chudobiak
2000-01-01	version bumpINSTRUMENT_6_4_20	Mike
2000-01-01	Only ignore polarity when shown to user. Use polarity when considering calibr...	Mike
2000-01-01	let rise time go to the lowest hardware-possible value, not just the specifie...INSTRUMENT_6_4_19c	Mike
2000-01-01	reduce min rise time cal points to reflect faster 266D	Mike
2000-01-01	same as last, missed a spotINSTRUMENT_6_4_19b	Mike
2000-01-01	tagged for 6.4.19INSTRUMENT_6_4_19	Mike
2000-01-01	ampl_zero_equiv can be large in some AVRQ units, use smallest_allowed_number ...	Mike
2000-01-01	fix encoder clearingINSTRUMENT_6_4_18b	Mike
2000-01-01	version bumpINSTRUMENT_6_4_18	Mike
2000-01-01	ignore tiniest encoder steps	Mike
2020-03-18	version bumpINSTRUMENT_6_4_17	Michael J. Chudobiak
2020-03-18	add an "ALIVE" output, to switch on VCC2 in AVRQ (for example)	Michael J. Chudobiak
2000-01-01	version bumpINSTRUMENT_6_4_16	Mike
2000-01-01	allow mult/div by 10 of burst count values	Mike
2000-01-01	Simplify needlessly complex error handling when adjusting encoder	Mike
2000-01-01	Simplify needlessly complex error handling when mult/div menu values	Mike
2000-01-01	Don't move arrow if only one mode. Fix amplitude mode list.INSTRUMENT_6_4_15b	Mike
2000-01-01	version bumpINSTRUMENT_6_4_15	Mike
2000-01-01	tidy amplitude menu code	Mike
2000-01-01	Don't write GPIB address to flash until CHANGE button pressed, to avoid weird...	Mike
2000-01-01	version bumpINSTRUMENT_6_4_14	Mike
2000-01-01	another divide-by-zero error	Mike
2000-01-01	version bumpINSTRUMENT_6_4_13	Mike
2019-07-16	forward port of avg_error calc divide-by-zero fix from AVR-8A-B-P-QTKB repair	Michael J. Chudobiak
2000-01-01	version bumpINSTRUMENT_6_4_12	Mike
2000-01-01	do not reset state before calibrating rise time in AVRQ	Mike
2019-01-08	version bumpINSTRUMENT_6_4_11	Michael J. Chudobiak
2019-01-08	always enable vxi now	Michael J. Chudobiak
2000-01-01	fix min/max ampl/vout balancing when nulling delay shift calINSTRUMENT_6_4_10b	Mike
2000-01-01	version bumpINSTRUMENT_6_4_10	Mike
2000-01-01	fix ampl min/max checks when max_ampl is limited by max_vout (some -OT units)	Mike
2018-11-23	version bumpINSTRUMENT_6_4_09	Michael J. Chudobiak
2018-11-23	enable VXI on unprogrammed boards, for testing without GPIB	Michael J. Chudobiak
2000-01-01	make max step size deviation configurableINSTRUMENT_6_4_08b	Mike
2000-01-01	version bumpINSTRUMENT_6_4_08	Mike
2000-01-01	better monitor averaging (for AVO-8E3 S/N 13790) with auto-reset of average	Mike
2000-01-01	reduce duplicate prompts in multi-line handlingINSTRUMENT_6_4_07c	Mike
2000-01-01	make force_output_fully_off work properly for 2-channel unitsINSTRUMENT_6_4_07b	Mike
2000-01-01	version bumpINSTRUMENT_6_4_07	Mike
2000-01-01	indent last commit properly	Mike
2000-01-01	Split inputs into separate lines when multiple interactive commands are received	Mike
2000-01-01	version bumpINSTRUMENT_6_4_06	Mike
2000-01-01	fix duty cycle calculation when calibrating amplitude	Mike
2018-08-14	only check pw_rc limit if greater than zeroINSTRUMENT_6_4_05b	Michael J. Chudobiak
2000-01-01	version bumpINSTRUMENT_6_4_05	Mike
2000-01-01	most error checks now used rationalized limit-check functions	Mike
2000-01-01	Revert portion of last for burst control. Deal with later. Report error only ...	Mike
2000-01-01	use standard functions to do simple positive min/max error checks	Mike