1 files changed, 195 insertions, 0 deletions
diff --git a/linux/arch/x86/kernel/irqinit.c b/linux/arch/x86/kernel/irqinit.c
new file mode 100644
index 00000000..cd10a643
--- /dev/null
+++ b/linux/arch/x86/kernel/irqinit.c
@@ -0,0 +1,195 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/random.h>
+#include <linux/kprobes.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <linux/atomic.h>
+#include <asm/timer.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/traps.h>
+#include <asm/prom.h>
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.name = "cascade",
+	.flags = IRQF_NO_THREAD,
+};
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... NR_VECTORS - 1] = VECTOR_UNDEFINED,
+};
+
+int vector_used_by_percpu_irq(unsigned int vector)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		if (per_cpu(vector_irq, cpu)[vector] > VECTOR_UNDEFINED)
+			return 1;
+	}
+
+	return 0;
+}
+
+void __init init_ISA_irqs(void)
+{
+	struct irq_chip *chip = legacy_pic->chip;
+	int i;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+	init_bsp_APIC();
+#endif
+	legacy_pic->init(0);
+
+	for (i = 0; i < nr_legacy_irqs(); i++)
+		irq_set_chip_and_handler(i, chip, handle_level_irq);
+}
+
+void __init init_IRQ(void)
+{
+	int i;
+
+	/*
+	 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
+	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
+	 * then this configuration will likely be static after the boot. If
+	 * these IRQ's are handled by more mordern controllers like IO-APIC,
+	 * then this vector space can be freed and re-used dynamically as the
+	 * irq's migrate etc.
+	 */
+	for (i = 0; i < nr_legacy_irqs(); i++)
+		per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
+
+	x86_init.irqs.intr_init();
+}
+
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPI for generic function call */
+	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for generic single function call */
+	alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+			call_function_single_interrupt);
+
+	/* Low priority IPI to cleanup after moving an irq */
+	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+	set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+
+	/* IPI used for rebooting/stopping */
+	alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+	smp_intr_init();
+
+#ifdef CONFIG_X86_THERMAL_VECTOR
+	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
+	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/* self generated IPI for local APIC timer */
+	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI for X86 platform specific use */
+	alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
+#ifdef CONFIG_HAVE_KVM
+	/* IPI for KVM to deliver posted interrupt */
+	alloc_intr_gate(POSTED_INTR_VECTOR, kvm_posted_intr_ipi);
+#endif
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	/* IRQ work interrupts: */
+# ifdef CONFIG_IRQ_WORK
+	alloc_intr_gate(IRQ_WORK_VECTOR, irq_work_interrupt);
+# endif
+
+#endif
+}
+
+void __init native_init_IRQ(void)
+{
+	int i;
+
+	/* Execute any quirks before the call gates are initialised: */
+	x86_init.irqs.pre_vector_init();
+
+	apic_intr_init();
+
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	i = FIRST_EXTERNAL_VECTOR;
+#ifndef CONFIG_X86_LOCAL_APIC
+#define first_system_vector NR_VECTORS
+#endif
+	for_each_clear_bit_from(i, used_vectors, first_system_vector) {
+		/* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+		set_intr_gate(i, irq_entries_start +
+				8 * (i - FIRST_EXTERNAL_VECTOR));
+	}
+#ifdef CONFIG_X86_LOCAL_APIC
+	for_each_clear_bit_from(i, used_vectors, NR_VECTORS)
+		set_intr_gate(i, spurious_interrupt);
+#endif
+
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
+		setup_irq(2, &irq2);
+
+#ifdef CONFIG_X86_32
+	irq_ctx_init(smp_processor_id());
+#endif
+}