diff options
author | Wolfgang Denk <wd@pollux.(none)> | 2005-09-25 16:22:14 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@pollux.(none)> | 2005-09-25 16:22:14 +0200 |
commit | 0148e8cb4337a2c65a5ed539d0e7b87f2e099329 (patch) | |
tree | 91341269c2eb3bd6356e608d8f9a5b910180fe2e | |
parent | 389db1f113cbc0f81f2a7311fa4114c749c81595 (diff) |
Update multicore CM9XX support for Integrator AP to allow booting from flash
Patch by Jean-Paul Saman, 8 Feb 2005
-rw-r--r-- | CHANGELOG | 3 | ||||
-rw-r--r-- | board/integratorap/integratorap.c | 37 | ||||
-rw-r--r-- | board/integratorap/platform.S | 183 | ||||
-rw-r--r-- | include/configs/integratorap.h | 25 |
4 files changed, 241 insertions, 7 deletions
@@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Update multicore CM9XX support for Integrator AP to allow booting from flash + Patch by Jean-Paul Saman, 8 Feb 2005 + * Fix strswab() to reliably find end of string Patch by Andrew Dyer, 08 Feb 2005 diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c index 31bd1d48eb..ff074ca3bc 100644 --- a/board/integratorap/integratorap.c +++ b/board/integratorap/integratorap.c @@ -75,6 +75,11 @@ int board_init (void) gd->flags = 0; +#ifdef CONFIG_CM_REMAP +extern void cm_remap(void); + cm_remap(); /* remaps writeable memory to 0x00000000 */ +#endif + icache_enable (); flash__init (); @@ -475,6 +480,38 @@ void ether__init (void) ******************************/ int dram_init (void) { + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + +#ifdef CONFIG_CM_SPD_DETECT + { +extern void dram_query(void); + unsigned long cm_reg_sdram; + unsigned long sdram_shift; + + dram_query(); /* Assembler accesses to CM registers */ + /* Queries the SPD values */ + + /* Obtain the SDRAM size from the CM SDRAM register */ + + cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM); + /* Register SDRAM size + * + * 0xXXXXXXbbb000bb 16 MB + * 0xXXXXXXbbb001bb 32 MB + * 0xXXXXXXbbb010bb 64 MB + * 0xXXXXXXbbb011bb 128 MB + * 0xXXXXXXbbb100bb 256 MB + * + */ + sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4; + gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift; + + } +#endif /* CM_SPD_DETECT */ + return 0; } diff --git a/board/integratorap/platform.S b/board/integratorap/platform.S index 897c7bbc61..fefee72f3e 100644 --- a/board/integratorap/platform.S +++ b/board/integratorap/platform.S @@ -14,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -26,12 +26,6 @@ #include <config.h> #include <version.h> -.globl platformsetup -platformsetup: - - /* All done by Integrator's boot monitor! */ - mov pc, lr - /* Reset using CM control register */ .global reset_cpu reset_cpu: @@ -42,3 +36,178 @@ reset_cpu: reset_failed: b reset_failed + +/* set up the platform, once the cpu has been initialized */ +.globl platformsetup +platformsetup: + /* If U-Boot has been run after the ARM boot monitor + * then all the necessary actions have been done + * otherwise we are running from user flash mapped to 0x00000000 + * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED -- + * Changes to the (possibly soft) reset defaults of the processor + * itself should be performed in cpu/arm<>/start.S + * This function affects only the core module or board settings + */ + +#ifdef CONFIG_CM_INIT + /* CM has an initialization register + * - bits in it are wired into test-chip pins to force + * reset defaults + * - may need to change its contents for U-Boot + */ + + /* set the desired CM specific value */ + mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */ + +#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E) + orr r2,r2,#CMMASK_INIT_102 +#else + +#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \ + !defined (CONFIG_CM940T) + +#ifdef CONFIG_CM_MULTIPLE_SSRAM + /* set simple mapping */ + and r2,r2,#CMMASK_MAP_SIMPLE +#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */ + +#ifdef CONFIG_CM_TCRAM + /* disable TCRAM */ + and r2,r2,#CMMASK_TCRAM_DISABLE +#endif /* #ifdef CONFIG_CM_TCRAM */ + +#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \ + defined (CONFIG_CM1136JF_S) + + and r2,r2,#CMMASK_LE + +#endif /* cpu with little endian initialization */ + + orr r2,r2,#CMMASK_CMxx6_COMMON + +#endif /* CMxx6 code */ + +#endif /* ARM102xxE value */ + + /* read CM_INIT */ + mov r0, #CM_BASE + ldr r1, [r0, #OS_INIT] + /* check against desired bit setting */ + and r3,r1,r2 + cmp r3,r2 + beq init_reg_OK + + /* lock for change */ + mov r3, #CMVAL_LOCK + and r3,r3,#CMMASK_LOCK + str r3, [r0, #OS_LOCK] + /* set desired value */ + orr r1,r1,r2 + /* write & relock CM_INIT */ + str r1, [r0, #OS_INIT] + mov r1, #CMVAL_UNLOCK + str r1, [r0, #OS_LOCK] + + /* soft reset so new values used */ + b reset_cpu + +init_reg_OK: + +#endif /* CONFIG_CM_INIT */ + + mov pc, lr + +#ifdef CONFIG_CM_SPD_DETECT + /* Fast memory is available for the DRAM data + * - ensure it has been transferred, then summarize the data + * into a CM register + */ +.globl dram_query +dram_query: + stmfd r13!,{r4-r6,lr} + /* set up SDRAM info */ + /* - based on example code from the CM User Guide */ + mov r0, #CM_BASE + +readspdbit: + ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */ + and r1, r1, #0x20 /* mask SPD bit (5) */ + cmp r1, #0x20 /* test if set */ + bne readspdbit + +setupsdram: + add r0, r0, #OS_SPD /* address the copy of the SDP data */ + ldrb r1, [r0, #3] /* number of row address lines */ + ldrb r2, [r0, #4] /* number of column address lines */ + ldrb r3, [r0, #5] /* number of banks */ + ldrb r4, [r0, #31] /* module bank density */ + mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */ + mov r5, r5, ASL#2 /* size in MB */ + mov r0, #CM_BASE /* reload for later code */ + cmp r5, #0x10 /* is it 16MB? */ + bne not16 + mov r6, #0x2 /* store size and CAS latency of 2 */ + b writesize + +not16: + cmp r5, #0x20 /* is it 32MB? */ + bne not32 + mov r6, #0x6 + b writesize + +not32: + cmp r5, #0x40 /* is it 64MB? */ + bne not64 + mov r6, #0xa + b writesize + +not64: + cmp r5, #0x80 /* is it 128MB? */ + bne not128 + mov r6, #0xe + b writesize + +not128: + /* if it is none of these sizes then it is either 256MB, or + * there is no SDRAM fitted so default to 256MB + */ + mov r6, #0x12 + +writesize: + mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */ + orr r2, r1, r2, ASL#12 /* OR in column address lines */ + orr r3, r2, r3, ASL#16 /* OR in number of banks */ + orr r6, r6, r3 /* OR in size and CAS latency */ + str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */ + +#endif /* #ifdef CONFIG_CM_SPD_DETECT */ + + ldmfd r13!,{r4-r6,pc} /* back to caller */ + +#ifdef CONFIG_CM_REMAP + /* CM remap bit is operational + * - use it to map writeable memory at 0x00000000, in place of flash + */ +.globl cm_remap +cm_remap: + stmfd r13!,{r4-r10,lr} + + mov r0, #CM_BASE + ldr r1, [r0, #OS_CTRL] + orr r1, r1, #CMMASK_REMAP /* set remap and led bits */ + str r1, [r0, #OS_CTRL] + + /* Now 0x00000000 is writeable, replace the vectors */ + ldr r0, =_start /* r0 <- start of vectors */ + ldr r2, =_armboot_start /* r2 <- past vectors */ + sub r1,r1,r1 /* destination 0x00000000 */ + +copy_vec: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + ble copy_vec + + ldmfd r13!,{r4-r10,pc} /* back to caller */ + +#endif /* #ifdef CONFIG_CM_REMAP */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index ea1158f39c..25f4682e65 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -43,6 +43,12 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ + +#undef CONFIG_INIT_CRITICAL +#define CONFIG_CM_INIT 1 +#define CONFIG_CM_REMAP 1 +#undef CONFIG_CM_SPD_DETECT + /* * Size of malloc() pool */ @@ -284,9 +290,28 @@ #define OS_INIT 0x00000024 #define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */ #define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */ +#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */ #ifdef CONFIG_CM_SPD_DETECT #define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */ #endif +#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E) +#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual + * - PLL test clock bypassed + * - bus clock ratio 2 + * - little endian + * - vectors at zero + */ +#endif /* CM1022xx */ + +#define CMMASK_LE 0x00000008 /* little endian */ +#define CMMASK_CMxx6_COMMON 0x00000100 /* Common value for CMxx6 + * - divisor/ratio b00000001 + * bx + * - HCLKDIV b000 + * bxx + * - PLL BYPASS b00 + */ #endif /* __CONFIG_H */ + |