arm/km: add support for portl2 board

This adds support for the keymile Kirkwood BEC portl2 board. This board
relies on the km_arm (km_kirkwood) BEC.

The egiga driver is configured for a 100M full-duplex, A/N off connnection
to the backplane. This board has always ethernet present, because it is
connected to the marvell switch similar to mgcoge3un. The reset_phy
functionality is also the same to mgcoge3un.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Heiko Schocher <hs@denx.de>

5 files changed, 89 insertions, 3 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 40560b78a2..a664f4dab2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -734,6 +734,7 @@ Sergey Lapin <slapin@ossfans.org>
 Valentin Longchamp <valentin.longchamp@keymile.com>
 
 	km_kirkwood	ARM926EJS (Kirkwood SoC)
+	portl2		ARM926EJS (Kirkwood SoC)
 
 Nishanth Menon <nm@ti.com>
 
diff --git a/MAKEALL b/MAKEALL
index 9a2595d17c..4adaeb8538 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -364,6 +364,7 @@ LIST_ARM9="			\
 	openrd_base		\
 	openrd_client		\
 	openrd_ultimate		\
+	portl2			\
 	rd6281a			\
 	sbc2410x		\
 	scb9328			\
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index ed6ede3251..5da856fabc 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -130,10 +130,12 @@ int startup_allowed(void)
 			return 1;
 	return 0;
 }
+#endif
 
+#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
 /*
- * mgcoge3un has always ethernet present. Its connected to the 6061 switch
- * and provides ICNev and piggy4 connections.
+ * These two boards have always ethernet present. Its connected to the mv
+ * switch.
  */
 int ethernet_present(void)
 {
@@ -335,7 +337,7 @@ void dram_init_banksize(void)
 	}
 }
 
-#if defined(CONFIG_MGCOGE3UN)
+#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
 
 #define	PHY_LED_SEL	0x18
 #define PHY_LED0_LINK	(0x5)
diff --git a/boards.cfg b/boards.cfg
index 6e5e5356da..ec18460bb7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -118,6 +118,7 @@ davinci_sonata               arm         arm926ejs   sonata              davinci
 km_kirkwood                  arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood:KM_DISABLE_PCI
 km_kirkwood_pci              arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood
 mgcoge3un                    arm         arm926ejs   km_arm              keymile        kirkwood
+portl2                       arm         arm926ejs   km_arm              keymile        kirkwood
 guruplug                     arm         arm926ejs   -                   Marvell        kirkwood
 mv88f6281gtw_ge              arm         arm926ejs   -                   Marvell        kirkwood
 openrd_base                  arm         arm926ejs   openrd              Marvell        kirkwood        openrd:BOARD_IS_OPENRD_BASE
diff --git a/include/configs/portl2.h b/include/configs/portl2.h
new file mode 100644
index 0000000000..a8543a534f
--- /dev/null
+++ b/include/configs/portl2.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2010-2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com.
+ * Valentin Longchamp, Keymile AG Bern, valentin.longchamp@keymile.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* for linking errors see
+ * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
+
+#ifndef _CONFIG_PORTL2_H
+#define _CONFIG_PORTL2_H
+
+/* include common defines/options for all arm based Keymile boards */
+#include "km/km_arm.h"
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING	"\nKeymile Port-L2"
+#define CONFIG_HOSTNAME			portl2
+#define CONFIG_PORTL2
+
+#define KM_IVM_BUS	"pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_ENV_BUS	"pca9544a:70:a" /* I2C2 (Mux-Port 2)*/
+
+/*
+ * portl2 has a fixed link to the XMPP backplane
+ * with 100MB full duplex and autoneg off, for this
+ * reason we have to change the default settings
+ */
+#define PORT_SERIAL_CONTROL_VALUE		( \
+	MVGBE_FORCE_LINK_PASS			| \
+	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
+	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
+	MVGBE_ADV_NO_FLOW_CTRL			| \
+	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
+	MVGBE_FORCE_BP_MODE_NO_JAM		| \
+	(1 << 9) /* Reserved bit has to be 1 */	| \
+	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
+	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
+	MVGBE_DTE_ADV_0				| \
+	MVGBE_MIIPHY_MAC_MODE			| \
+	MVGBE_AUTO_NEG_NO_CHANGE		| \
+	MVGBE_MAX_RX_PACKET_1552BYTE		| \
+	MVGBE_CLR_EXT_LOOPBACK			| \
+	MVGBE_SET_FULL_DUPLEX_MODE		| \
+	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
+	MVGBE_SET_GMII_SPEED_TO_10_100	|\
+	MVGBE_SET_MII_SPEED_TO_100)
+
+/*
+ * portl2 does use the PCIe Port0
+ */
+#define  CONFIG_KIRKWOOD_PCIE_INIT
+
+#endif /* _CONFIG_PORTL2_H */