Merge branch 'master' of git://git.denx.de/u-boot-net

13 files changed, 35 insertions, 17 deletions

diff --git a/README b/README
index b5c1c0377b..f386041140 100644
--- a/README
+++ b/README
@@ -2975,9 +2975,6 @@ Configuration Settings:
 		non page size aligned address and this could cause major
 		problems.
 
-- CONFIG_SYS_TFTP_LOADADDR:
-		Default load address for network file downloads
-
 - CONFIG_SYS_LOADS_BAUD_CHANGE:
 		Enable temporary baudrate change while serial download
 
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 2d4da4b386..8ba98b27d5 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1688,6 +1688,16 @@ e1000_init_hw(struct eth_device *nic)
 		E1000_WRITE_REG(hw, TXDCTL, ctrl);
 	}
 
+	/* Set the receive descriptor write back policy */
+
+	if (hw->mac_type >= e1000_82571) {
+		ctrl = E1000_READ_REG(hw, RXDCTL);
+		ctrl =
+		    (ctrl & ~E1000_RXDCTL_WTHRESH) |
+		    E1000_RXDCTL_FULL_RX_DESC_WB;
+		E1000_WRITE_REG(hw, RXDCTL, ctrl);
+	}
+
 	switch (hw->mac_type) {
 	default:
 		break;
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index fd1d8f8717..1bbae5085a 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -1551,6 +1551,7 @@ struct e1000_hw {
 #define E1000_RXDCTL_HTHRESH 0x00003F00	/* RXDCTL Host Threshold */
 #define E1000_RXDCTL_WTHRESH 0x003F0000	/* RXDCTL Writeback Threshold */
 #define E1000_RXDCTL_GRAN    0x01000000	/* RXDCTL Granularity */
+#define E1000_RXDCTL_FULL_RX_DESC_WB 0x01010000	/* GRAN=1, WTHRESH=1 */
 
 /* Transmit Descriptor Control */
 #define E1000_TXDCTL_PTHRESH 0x0000003F	/* TXDCTL Prefetch Threshold */
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e51e799e29..4b271989ac 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -425,6 +425,16 @@ static struct phy_driver M88E1118_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver M88E1118R_driver = {
+	.name = "Marvell 88E1118R",
+	.uid = 0x1410e40,
+	.mask = 0xffffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &m88e1118_config,
+	.startup = &m88e1118_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 static struct phy_driver M88E1121R_driver = {
 	.name = "Marvell 88E1121R",
 	.uid = 0x1410cb0,
@@ -461,6 +471,7 @@ int phy_marvell_init(void)
 	phy_register(&M88E1145_driver);
 	phy_register(&M88E1121R_driver);
 	phy_register(&M88E1118_driver);
+	phy_register(&M88E1118R_driver);
 	phy_register(&M88E1111S_driver);
 	phy_register(&M88E1011S_driver);
 
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 2d9cc328b5..e6fc8c8bf6 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -417,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 		printf(SHETHER_NAME ": 100Base/");
 #if defined(SH_ETH_TYPE_GETHER)
 		sh_eth_write(eth, GECMR_100B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 		sh_eth_write(eth, 1, RTRATE);
 #elif defined(CONFIG_CPU_SH7724)
 		val = ECMR_RTM;
@@ -426,7 +426,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 		printf(SHETHER_NAME ": 10Base/");
 #if defined(SH_ETH_TYPE_GETHER)
 		sh_eth_write(eth, GECMR_10B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 		sh_eth_write(eth, 0, RTRATE);
 #endif
 	}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 61d2df9063..568fafe5f5 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -288,7 +288,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
 #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
 #define SH_ETH_TYPE_GETHER
 #define BASE_IO_ADDR	0xfee00000
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 #if defined(CONFIG_SH_ETHER_USE_GETHER)
 #define SH_ETH_TYPE_GETHER
 #define BASE_IO_ADDR	0xfee00000
@@ -346,7 +346,7 @@ enum DMAC_T_BIT {
 
 /* GECMR */
 enum GECMR_BIT {
-#if defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 	GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00,
 #else
 	GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00,
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 1daec69677..6bceccbc14 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -153,7 +153,6 @@
 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
-#define CONFIG_SYS_TFTP_LOADADDR	CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
 #define CONFIG_SYS_DRAM_TEST		1
 
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index b98caccb81..9a649ca125 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -96,11 +96,6 @@
 #define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
- * Set default load address for tftp network downloads
- */
-#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
-
-/*
  * Turn off the watchdog timer
  */
 #undef	CONFIG_WATCHDOG
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 36921ca8b9..4849f94c99 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -416,7 +416,6 @@
 #define CONFIG_IPADDR					10.0.4.111
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
-#define	CONFIG_SYS_TFTP_LOADADDR	0x00100000
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index ccfe032ca7..5a87cc5d3d 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -371,7 +371,6 @@
 #define	CONFIG_CLOCKS_IN_MHZ	1      /* clocks passsed to Linux in MHz */
 
 #define CONFIG_SYS_LOAD_ADDR     0x00100000   /* default load address */
-#define CONFIG_SYS_TFTP_LOADADDR 0x00100000   /* default load address for network file downloads */
 
 #define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
 
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index d203bb4dd7..66568c8d00 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -65,7 +65,6 @@
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
 #define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
 #define CONFIG_SERVERIP		10.8.17.105	/* Spree */
-#define CONFIG_SYS_TFTP_LOADADDR	10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr=FFA00000\0" \
diff --git a/net/link_local.c b/net/link_local.c
index d52f13adb4..1ba796ebdf 100644
--- a/net/link_local.c
+++ b/net/link_local.c
@@ -103,7 +103,7 @@ static void configure_wait(void)
 void link_local_start(void)
 {
 	ip = getenv_IPaddr("llipaddr");
-	if (ip != 0 && (ip & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
+	if (ip != 0 && (ntohl(ip) & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
 		puts("invalid link address");
 		net_set_state(NETLOOP_FAIL);
 		return;
diff --git a/net/tftp.c b/net/tftp.c
index 59a8ebb3cf..09790eb7cf 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -40,6 +40,7 @@
 
 static ulong TftpTimeoutMSecs = TIMEOUT;
 static int TftpTimeoutCountMax = TIMEOUT_COUNT;
+static ulong time_start;   /* Record time we started tftp */
 
 /*
  * These globals govern the timeout behavior when attempting a connection to a
@@ -299,6 +300,12 @@ static void tftp_complete(void)
 		TftpNumchars++;
 	}
 #endif
+	time_start = get_timer(time_start);
+	if (time_start > 0) {
+		puts("\n\t ");	/* Line up with "Loading: " */
+		print_size(NetBootFileXferSize /
+			time_start * 1000, "/s");
+	}
 	puts("\ndone\n");
 	net_set_state(NETLOOP_SUCCESS);
 }
@@ -775,6 +782,7 @@ void TftpStart(enum proto_t protocol)
 		TftpState = STATE_SEND_RRQ;
 	}
 
+	time_start = get_timer(0);
 	TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
 
 	NetSetTimeout(TftpTimeoutMSecs, TftpTimeout);