diff options
author | Adam Ford <aford173@gmail.com> | 2018-07-13 15:50:02 -0500 |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2018-08-21 16:21:37 +0200 |
commit | 10d5ed9a54c5498992ebda56383c23a42bc70438 (patch) | |
tree | af374816228a88ba27033f49264f226db6b6474c | |
parent | aa51579f9aecdc509c91d6a9fc9498c2495cf218 (diff) |
usb: musb-new: omap2430: Remove dead code
A bunch of code was encapsulated in #ifdef's whether or not
it is building or for U-Boot. Since this code is always building
for U-Boot, this patch removes the dead code.
Signed-off-by: Adam Ford <aford173@gmail.com>
-rw-r--r-- | drivers/usb/musb-new/omap2430.c | 512 |
1 files changed, 0 insertions, 512 deletions
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index 4753d79ede..fd63c07789 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -8,202 +8,16 @@ * * This file is part of the Inventra Controller Driver for Linux. */ -#ifndef __UBOOT__ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/pm_runtime.h> -#include <linux/err.h> -#include <linux/usb/musb-omap.h> -#else #include <common.h> #include <asm/omap_common.h> #include <asm/omap_musb.h> #include <twl4030.h> #include <twl6030.h> #include "linux-compat.h" -#endif #include "musb_core.h" #include "omap2430.h" -#ifndef __UBOOT__ -struct omap2430_glue { - struct device *dev; - struct platform_device *musb; - enum omap_musb_vbus_id_status status; - struct work_struct omap_musb_mailbox_work; -}; -#define glue_to_musb(g) platform_get_drvdata(g->musb) - -struct omap2430_glue *_glue; - -static struct timer_list musb_idle_timer; - -static void musb_do_idle(unsigned long _musb) -{ - struct musb *musb = (void *)_musb; - unsigned long flags; - u8 power; - u8 devctl; - - spin_lock_irqsave(&musb->lock, flags); - - switch (musb->xceiv->state) { - case OTG_STATE_A_WAIT_BCON: - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_IDLE; - MUSB_DEV_MODE(musb); - } else { - musb->xceiv->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - } - break; - case OTG_STATE_A_SUSPEND: - /* finish RESUME signaling? */ - if (musb->port1_status & MUSB_PORT_STAT_RESUME) { - power = musb_readb(musb->mregs, MUSB_POWER); - power &= ~MUSB_POWER_RESUME; - dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power); - musb_writeb(musb->mregs, MUSB_POWER, power); - musb->is_active = 1; - musb->port1_status &= ~(USB_PORT_STAT_SUSPEND - | MUSB_PORT_STAT_RESUME); - musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; - usb_hcd_poll_rh_status(musb_to_hcd(musb)); - /* NOTE: it might really be A_WAIT_BCON ... */ - musb->xceiv->state = OTG_STATE_A_HOST; - } - break; - case OTG_STATE_A_HOST: - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) - musb->xceiv->state = OTG_STATE_B_IDLE; - else - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; - default: - break; - } - spin_unlock_irqrestore(&musb->lock, flags); -} - - -static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - unsigned long default_timeout = jiffies + msecs_to_jiffies(3); - static unsigned long last_timer; - - if (timeout == 0) - timeout = default_timeout; - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || ((musb->a_wait_bcon == 0) - && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); - del_timer(&musb_idle_timer); - last_timer = jiffies; - return; - } - - if (time_after(last_timer, timeout)) { - if (!timer_pending(&musb_idle_timer)) - last_timer = timeout; - else { - dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n"); - return; - } - } - last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - otg_state_string(musb->xceiv->state), - (unsigned long)jiffies_to_msecs(timeout - jiffies)); - mod_timer(&musb_idle_timer, timeout); -} - -static void omap2430_musb_set_vbus(struct musb *musb, int is_on) -{ - struct usb_otg *otg = musb->xceiv->otg; - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - int ret = 1; - /* HDRC controls CPEN, but beware current surges during device - * connect. They can trigger transient overcurrent conditions - * that must be ignored. - */ - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - if (is_on) { - if (musb->xceiv->state == OTG_STATE_A_IDLE) { - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - /* - * Wait for the musb to set as A device to enable the - * VBUS - */ - while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { - - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_err(musb->controller, - "configured as A device timeout"); - ret = -EINVAL; - break; - } - } - - if (ret && otg->set_vbus) - otg_set_vbus(otg, 1); - } else { - musb->is_active = 1; - otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; - devctl |= MUSB_DEVCTL_SESSION; - MUSB_HST_MODE(musb); - } - } else { - musb->is_active = 0; - - /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and - * jumping right to B_IDLE... - */ - - otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; - devctl &= ~MUSB_DEVCTL_SESSION; - - MUSB_DEV_MODE(musb); - } - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - dev_dbg(musb->controller, "VBUS %s, devctl %02x " - /* otg %3x conf %08x prcm %08x */ "\n", - otg_state_string(musb->xceiv->state), - musb_readb(musb->mregs, MUSB_DEVCTL)); -} - -static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode) -{ - u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - return 0; -} -#endif - static inline void omap2430_low_level_exit(struct musb *musb) { u32 l; @@ -223,100 +37,14 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -#ifndef __UBOOT__ -void omap_musb_mailbox(enum omap_musb_vbus_id_status status) -{ - struct omap2430_glue *glue = _glue; - struct musb *musb = glue_to_musb(glue); - - glue->status = status; - if (!musb) { - dev_err(glue->dev, "musb core is not yet ready\n"); - return; - } - - schedule_work(&glue->omap_musb_mailbox_work); -} -EXPORT_SYMBOL_GPL(omap_musb_mailbox); - -static void omap_musb_set_mailbox(struct omap2430_glue *glue) -{ - struct musb *musb = glue_to_musb(glue); - struct device *dev = musb->controller; - struct musb_hdrc_platform_data *pdata = dev->platform_data; - struct omap_musb_board_data *data = pdata->board_data; - struct usb_otg *otg = musb->xceiv->otg; - - switch (glue->status) { - case OMAP_MUSB_ID_GROUND: - dev_dbg(dev, "ID GND\n"); - - otg->default_a = true; - musb->xceiv->state = OTG_STATE_A_IDLE; - musb->xceiv->last_event = USB_EVENT_ID; - if (!is_otg_enabled(musb) || musb->gadget_driver) { - pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); - omap2430_musb_set_vbus(musb, 1); - } - break; - - case OMAP_MUSB_VBUS_VALID: - dev_dbg(dev, "VBUS Connect\n"); - - otg->default_a = false; - musb->xceiv->state = OTG_STATE_B_IDLE; - musb->xceiv->last_event = USB_EVENT_VBUS; - if (musb->gadget_driver) - pm_runtime_get_sync(dev); - usb_phy_init(musb->xceiv); - break; - - case OMAP_MUSB_ID_FLOAT: - case OMAP_MUSB_VBUS_OFF: - dev_dbg(dev, "VBUS Disconnect\n"); - - musb->xceiv->last_event = USB_EVENT_NONE; - if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) - if (musb->gadget_driver) { - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } - - if (data->interface_type == MUSB_INTERFACE_UTMI) { - if (musb->xceiv->otg->set_vbus) - otg_set_vbus(musb->xceiv->otg, 0); - } - usb_phy_shutdown(musb->xceiv); - break; - default: - dev_dbg(dev, "ID float\n"); - } -} - - -static void omap_musb_mailbox_work(struct work_struct *mailbox_work) -{ - struct omap2430_glue *glue = container_of(mailbox_work, - struct omap2430_glue, omap_musb_mailbox_work); - omap_musb_set_mailbox(glue); -} -#endif static int omap2430_musb_init(struct musb *musb) { u32 l; int status = 0; unsigned long int start; -#ifndef __UBOOT__ - struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - struct musb_hdrc_platform_data *plat = dev->platform_data; - struct omap_musb_board_data *data = plat->board_data; -#else struct omap_musb_board_data *data = (struct omap_musb_board_data *)musb->controller; -#endif /* Reset the controller */ musb_writel(musb->mregs, OTG_SYSCONFIG, SOFTRST); @@ -334,24 +62,6 @@ static int omap2430_musb_init(struct musb *musb) } } -#ifndef __UBOOT__ - /* We require some kind of external transceiver, hooked - * up through ULPI. TWL4030-family PMICs include one, - * which needs a driver, drivers aren't always needed. - */ - musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(musb->xceiv)) { - pr_err("HS USB OTG: no transceiver configured\n"); - return -ENODEV; - } - - status = pm_runtime_get_sync(dev); - if (status < 0) { - dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); - goto err1; - } -#endif - l = musb_readl(musb->mregs, OTG_INTERFSEL); if (data->interface_type == MUSB_INTERFACE_UTMI) { @@ -371,64 +81,14 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_SYSSTATUS), musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - -#ifndef __UBOOT__ - setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); - - if (glue->status != OMAP_MUSB_UNKNOWN) - omap_musb_set_mailbox(glue); - - pm_runtime_put_noidle(musb->controller); -#endif return 0; err1: return status; } -#ifndef __UBOOT__ -static void omap2430_musb_enable(struct musb *musb) -#else static int omap2430_musb_enable(struct musb *musb) -#endif { -#ifndef __UBOOT__ - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - struct musb_hdrc_platform_data *pdata = dev->platform_data; - struct omap_musb_board_data *data = pdata->board_data; - - switch (glue->status) { - - case OMAP_MUSB_ID_GROUND: - usb_phy_init(musb->xceiv); - if (data->interface_type != MUSB_INTERFACE_UTMI) - break; - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - while (musb_readb(musb->mregs, MUSB_DEVCTL) & - MUSB_DEVCTL_BDEVICE) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_err(dev, "configured as A device timeout"); - break; - } - } - break; - - case OMAP_MUSB_VBUS_VALID: - usb_phy_init(musb->xceiv); - break; - - default: - break; - } -#else #ifdef CONFIG_TWL4030_USB if (twl4030_usb_ulpi_init()) { serial_printf("ERROR: %s Could not initialize PHY\n", @@ -447,18 +107,11 @@ static int omap2430_musb_enable(struct musb *musb) #endif return 0; -#endif } static void omap2430_musb_disable(struct musb *musb) { -#ifndef __UBOOT__ - struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - if (glue->status != OMAP_MUSB_UNKNOWN) - usb_phy_shutdown(musb->xceiv); -#endif } static int omap2430_musb_exit(struct musb *musb) @@ -470,174 +123,9 @@ static int omap2430_musb_exit(struct musb *musb) return 0; } -#ifndef __UBOOT__ -static const struct musb_platform_ops omap2430_ops = { -#else const struct musb_platform_ops omap2430_ops = { -#endif .init = omap2430_musb_init, .exit = omap2430_musb_exit, - -#ifndef __UBOOT__ - .set_mode = omap2430_musb_set_mode, - .try_idle = omap2430_musb_try_idle, - - .set_vbus = omap2430_musb_set_vbus, -#endif - .enable = omap2430_musb_enable, .disable = omap2430_musb_disable, }; - -#ifndef __UBOOT__ -static u64 omap2430_dmamask = DMA_BIT_MASK(32); - -static int __devinit omap2430_probe(struct platform_device *pdev) -{ - struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; - struct platform_device *musb; - struct omap2430_glue *glue; - int ret = -ENOMEM; - - glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); - goto err0; - } - - musb = platform_device_alloc("musb-hdrc", -1); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err0; - } - - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &omap2430_dmamask; - musb->dev.coherent_dma_mask = omap2430_dmamask; - - glue->dev = &pdev->dev; - glue->musb = musb; - glue->status = OMAP_MUSB_UNKNOWN; - - pdata->platform_ops = &omap2430_ops; - - platform_set_drvdata(pdev, glue); - - /* - * REVISIT if we ever have two instances of the wrapper, we will be - * in big trouble - */ - _glue = glue; - - INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); - - ret = platform_device_add_resources(musb, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err1; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err1; - } - - pm_runtime_enable(&pdev->dev); - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; - } - - return 0; - -err1: - platform_device_put(musb); - -err0: - return ret; -} - -static int __devexit omap2430_remove(struct platform_device *pdev) -{ - struct omap2430_glue *glue = platform_get_drvdata(pdev); - - cancel_work_sync(&glue->omap_musb_mailbox_work); - platform_device_del(glue->musb); - platform_device_put(glue->musb); - - return 0; -} - -#ifdef CONFIG_PM - -static int omap2430_runtime_suspend(struct device *dev) -{ - struct omap2430_glue *glue = dev_get_drvdata(dev); - struct musb *musb = glue_to_musb(glue); - - if (musb) { - musb->context.otg_interfsel = musb_readl(musb->mregs, - OTG_INTERFSEL); - - omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); - } - - return 0; -} - -static int omap2430_runtime_resume(struct device *dev) -{ - struct omap2430_glue *glue = dev_get_drvdata(dev); - struct musb *musb = glue_to_musb(glue); - - if (musb) { - omap2430_low_level_init(musb); - musb_writel(musb->mregs, OTG_INTERFSEL, - musb->context.otg_interfsel); - - usb_phy_set_suspend(musb->xceiv, 0); - } - - return 0; -} - -static struct dev_pm_ops omap2430_pm_ops = { - .runtime_suspend = omap2430_runtime_suspend, - .runtime_resume = omap2430_runtime_resume, -}; - -#define DEV_PM_OPS (&omap2430_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -static struct platform_driver omap2430_driver = { - .probe = omap2430_probe, - .remove = __devexit_p(omap2430_remove), - .driver = { - .name = "musb-omap2430", - .pm = DEV_PM_OPS, - }, -}; - -MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); -MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); -MODULE_LICENSE("GPL v2"); - -static int __init omap2430_init(void) -{ - return platform_driver_register(&omap2430_driver); -} -subsys_initcall(omap2430_init); - -static void __exit omap2430_exit(void) -{ - platform_driver_unregister(&omap2430_driver); -} -module_exit(omap2430_exit); -#endif |