diff options
author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-04-12 22:07:57 +0200 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-04-12 22:07:57 +0200 |
commit | 18122019972ca639ee3b581257e3a63ff7c8efeb (patch) | |
tree | 52f7223e7c63f43322f3eee4722743e12190a19f | |
parent | 90639feaa0d66a204f9d03a325ab14e2f97f6cbb (diff) | |
parent | 785881f775252940185e10fbb2d5299c9ffa6bce (diff) |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
drivers/video/exynos_fb.c
270 files changed, 7061 insertions, 2059 deletions
@@ -664,7 +664,7 @@ build_target() { export BUILD_DIR="${output_dir}" target_arch=$(get_target_arch ${target}) - eval cross_toolchain=\$CROSS_COMPILE_${target_arch^^} + eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'` if [ "${cross_toolchain}" ] ; then MAKE="make CROSS_COMPILE=${cross_toolchain}" elif [ "${CROSS_COMPILE}" ] ; then @@ -24,7 +24,7 @@ VERSION = 2013 PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -402,8 +402,10 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin -ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin +ifneq ($(CONFIG_SPL_TARGET),) +ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) +endif # enable combined SPL/u-boot/dtb rules for tegra ifneq ($(CONFIG_TEGRA),) @@ -496,6 +496,13 @@ The following options need to be configured: exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! +- CPU timer options: + CONFIG_SYS_HZ + + The frequency of the timer returned by get_timer(). + get_timer() must operate in milliseconds and this CONFIG + option must be set to 1000. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -1329,6 +1336,29 @@ The following options need to be configured: CONFIG_SH_MMCIF_CLK Define the clock frequency for MMCIF +- USB Device Firmware Update (DFU) class support: + CONFIG_DFU_FUNCTION + This enables the USB portion of the DFU USB class + + CONFIG_CMD_DFU + This enables the command "dfu" which is used to have + U-Boot create a DFU class device via USB. This command + requires that the "dfu_alt_info" environment variable be + set and define the alt settings to expose to the host. + + CONFIG_DFU_MMC + This enables support for exposing (e)MMC devices via DFU. + + CONFIG_DFU_NAND + This enables support for exposing NAND devices via DFU. + + CONFIG_SYS_DFU_MAX_FILE_SIZE + When updating files rather than the raw storage device, + we use a static buffer to copy the file into and then write + the buffer once we've been given the whole file. Define + this to the maximum filesize (in bytes) for the buffer. + Default is 4 MiB if undefined. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV @@ -1930,15 +1960,15 @@ CBFS (Coreboot Filesystem) support I2C_READ - Code that returns TRUE if the I2C data line is high, - FALSE if it is low. + Code that returns true if the I2C data line is high, + false if it is low. eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) I2C_SDA(bit) - If <bit> is TRUE, sets the I2C data line high. If it - is FALSE, it clears it (low). + If <bit> is true, sets the I2C data line high. If it + is false, it clears it (low). eg: #define I2C_SDA(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ @@ -1946,8 +1976,8 @@ CBFS (Coreboot Filesystem) support I2C_SCL(bit) - If <bit> is TRUE, sets the I2C clock line high. If it - is FALSE, it clears it (low). + If <bit> is true, sets the I2C clock line high. If it + is false, it clears it (low). eg: #define I2C_SCL(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ @@ -2768,6 +2798,32 @@ FIT uImage format: Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support. +- UBI support + CONFIG_CMD_UBI + + Adds commands for interacting with MTD partitions formatted + with the UBI flash translation layer + + Requires also defining CONFIG_RBTREE + + CONFIG_UBI_SILENCE_MSG + + Make the verbose messages from UBI stop printing. This leaves + warnings and errors enabled. + +- UBIFS support + CONFIG_CMD_UBIFS + + Adds commands for interacting with UBI volumes formatted as + UBIFS. UBIFS is read-only in u-boot. + + Requires UBI support as well as CONFIG_LZO + + CONFIG_UBIFS_SILENCE_MSG + + Make the verbose messages from UBIFS stop printing. This leaves + warnings and errors enabled. + - SPL framework CONFIG_SPL Enable building of SPL globally. @@ -3487,6 +3543,33 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. environment. If redundant environment is used, it will be copied to CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. +- CONFIG_ENV_IS_IN_UBI: + + Define this if you have an UBI volume that you want to use for the + environment. This has the benefit of wear-leveling the environment + accesses, which is important on NAND. + + - CONFIG_ENV_UBI_PART: + + Define this to a string that is the mtd partition containing the UBI. + + - CONFIG_ENV_UBI_VOLUME: + + Define this to the name of the volume that you want to store the + environment in. + + - CONFIG_ENV_UBI_VOLUME_REDUND: + + Define this to the name of another volume to store a second copy of + the environment in. This will enable redundant environments in UBI. + It is assumed that both volumes are in the same MTD partition. + + - CONFIG_UBI_SILENCE_MSG + - CONFIG_UBIFS_SILENCE_MSG + + You will probably want to define these to avoid a really noisy system + when storing the env in UBI. + - CONFIG_SYS_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The diff --git a/api/api_display.c b/api/api_display.c index 643917088f..c167db7b14 100644 --- a/api/api_display.c +++ b/api/api_display.c @@ -45,8 +45,8 @@ int display_get_info(int type, struct display_info *di) case DISPLAY_TYPE_LCD: di->pixel_width = panel_info.vl_col; di->pixel_height = panel_info.vl_row; - di->screen_rows = CONSOLE_ROWS; - di->screen_cols = CONSOLE_COLS; + di->screen_rows = lcd_get_screen_rows(); + di->screen_cols = lcd_get_screen_columns(); break; #endif } diff --git a/arch/arm/cpu/arm926ejs/spear/spear600.c b/arch/arm/cpu/arm926ejs/spear/spear600.c index ff52131b09..9f0c1d1899 100644 --- a/arch/arm/cpu/arm926ejs/spear/spear600.c +++ b/arch/arm/cpu/arm926ejs/spear/spear600.c @@ -28,9 +28,6 @@ #include <asm/arch/spr_misc.h> #include <asm/arch/spr_defs.h> -#define FALSE 0 -#define TRUE (!FALSE) - static void sel_1v8(void) { struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; @@ -133,8 +130,8 @@ void soc_init(void) /* * xxx_boot_selected: * - * return TRUE if the particular booting option is selected - * return FALSE otherwise + * return true if the particular booting option is selected + * return false otherwise */ static u32 read_bootstrap(void) { @@ -150,18 +147,18 @@ int snor_boot_selected(void) /* Check whether SNOR boot is selected */ if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) == CONFIG_SPEAR_ONLYSNORBOOT) - return TRUE; + return true; if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) == CONFIG_SPEAR_NORNAND8BOOT) - return TRUE; + return true; if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) == CONFIG_SPEAR_NORNAND16BOOT) - return TRUE; + return true; } - return FALSE; + return false; } int nand_boot_selected(void) @@ -172,20 +169,20 @@ int nand_boot_selected(void) /* Check whether NAND boot is selected */ if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) == CONFIG_SPEAR_NORNAND8BOOT) - return TRUE; + return true; if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) == CONFIG_SPEAR_NORNAND16BOOT) - return TRUE; + return true; } - return FALSE; + return false; } int pnor_boot_selected(void) { /* Parallel NOR boot is not selected in any SPEAr600 revision */ - return FALSE; + return false; } int usb_boot_selected(void) @@ -195,39 +192,39 @@ int usb_boot_selected(void) if (USB_BOOT_SUPPORTED) { /* Check whether USB boot is selected */ if (!(bootstrap & CONFIG_SPEAR_USBBOOT)) - return TRUE; + return true; } - return FALSE; + return false; } int tftp_boot_selected(void) { /* TFTP boot is not selected in any SPEAr600 revision */ - return FALSE; + return false; } int uart_boot_selected(void) { /* UART boot is not selected in any SPEAr600 revision */ - return FALSE; + return false; } int spi_boot_selected(void) { /* SPI boot is not selected in any SPEAr600 revision */ - return FALSE; + return false; } int i2c_boot_selected(void) { /* I2C boot is not selected in any SPEAr600 revision */ - return FALSE; + return false; } int mmc_boot_selected(void) { - return FALSE; + return false; } void plat_late_init(void) diff --git a/arch/arm/cpu/arm926ejs/spear/spl_boot.c b/arch/arm/cpu/arm926ejs/spear/spl_boot.c index f2f9a4974e..3e2953c933 100644 --- a/arch/arm/cpu/arm926ejs/spear/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/spear/spl_boot.c @@ -120,7 +120,7 @@ u32 spl_boot(void) /* * All the supported booting devices are listed here. Each of * the booting type supported by the platform would define the - * macro xxx_BOOT_SUPPORTED to TRUE. + * macro xxx_BOOT_SUPPORTED to true. */ if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) { diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile index e088832560..9f63c3401b 100644 --- a/arch/arm/cpu/pxa/Makefile +++ b/arch/arm/cpu/pxa/Makefile @@ -33,7 +33,6 @@ COBJS-$(CONFIG_CPU_PXA27X) = pxa2xx.o COBJS-y += cpuinfo.o COBJS = $(COBJS-y) -COBJS += pxafb.o COBJS += timer.o COBJS += usb.o diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h index 000ffe52ca..1f28b36707 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/asm/posix_types.h @@ -61,9 +61,6 @@ typedef unsigned int __kernel_gid32_t; typedef unsigned short __kernel_old_uid_t; typedef unsigned short __kernel_old_gid_t; -#define BOOL_WAS_DEFINED -typedef enum { false = 0, true = 1 } bool; - #ifdef __GNUC__ typedef long long __kernel_loff_t; #endif diff --git a/arch/m68k/lib/interrupts.c b/arch/m68k/lib/interrupts.c index 133494f6dc..9751db4393 100644 --- a/arch/m68k/lib/interrupts.c +++ b/arch/m68k/lib/interrupts.c @@ -96,7 +96,7 @@ int disable_interrupts (void) sr = get_sr (); set_sr (sr | 0x0700); - return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */ + return ((sr & 0x0700) == 0); /* return true, if interrupts were enabled before */ } void int_handler (struct pt_regs *fp) diff --git a/arch/nds32/lib/interrupts.c b/arch/nds32/lib/interrupts.c index ca8c227b05..b4d0adc58f 100644 --- a/arch/nds32/lib/interrupts.c +++ b/arch/nds32/lib/interrupts.c @@ -59,7 +59,7 @@ void enable_interrupts(void) /* * disable interrupts - * Return TRUE if GIE is enabled before we disable it. + * Return true if GIE is enabled before we disable it. */ int disable_interrupts(void) { diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 5495dc59ee..825a29238d 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -513,7 +513,7 @@ void fsl_serdes_init(void) size_t arglen; #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 - int need_serdes_a001; /* TRUE == need work-around for SERDES A001 */ + int need_serdes_a001; /* true == need work-around for SERDES A001 */ #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 char buffer[HWCONFIG_BUFFER_SIZE]; diff --git a/arch/powerpc/cpu/mpc8xx/Makefile b/arch/powerpc/cpu/mpc8xx/Makefile index 0d1a12c458..ef10e2d027 100644 --- a/arch/powerpc/cpu/mpc8xx/Makefile +++ b/arch/powerpc/cpu/mpc8xx/Makefile @@ -37,7 +37,6 @@ COBJS-y += fec.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-y += i2c.o COBJS-y += interrupts.o -COBJS-y += lcd.o COBJS-y += scc.o COBJS-y += serial.o COBJS-y += speed.o diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 284709428d..2db90455f6 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -167,6 +167,11 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) } } + if (mode_idx < 0 || phy_idx < 0) { + puts("ERROR: wrong usb mode/phy defined!!\n"); + return; + } + dr_mode_type = modes[mode_idx]; dr_phy_type = phys[phy_idx]; diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c index 8a20a2b1e0..161d274dff 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c @@ -88,8 +88,6 @@ void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")) #define NUMMEMTESTS 8 #define NUMMEMWORDS 8 #define MAXBXCR 4 -#define TRUE 1 -#define FALSE 0 /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory @@ -298,7 +296,7 @@ static void get_spd_info(unsigned long *dimm_populated, unsigned char num_of_bytes; unsigned char total_size; - dimm_found = FALSE; + dimm_found = false; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { num_of_bytes = 0; total_size = 0; @@ -307,16 +305,16 @@ static void get_spd_info(unsigned long *dimm_populated, total_size = spd_read(iic0_dimm_addr[dimm_num], 1); if ((num_of_bytes != 0) && (total_size != 0)) { - dimm_populated[dimm_num] = TRUE; - dimm_found = TRUE; + dimm_populated[dimm_num] = true; + dimm_found = true; debug("DIMM slot %lu: populated\n", dimm_num); } else { - dimm_populated[dimm_num] = FALSE; + dimm_populated[dimm_num] = false; debug("DIMM slot %lu: Not populated\n", dimm_num); } } - if (dimm_found == FALSE) { + if (dimm_found == false) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); spd_ddr_init_hang (); } @@ -330,7 +328,7 @@ static void check_mem_type(unsigned long *dimm_populated, unsigned char dimm_type; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); switch (dimm_type) { case 7: @@ -356,7 +354,7 @@ static void check_volt_type(unsigned long *dimm_populated, unsigned long voltage_type; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8); if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", @@ -398,12 +396,12 @@ static void program_cfg0(unsigned long *dimm_populated, /* * FIXME: assume the DDR SDRAMs in both banks are the same */ - ecc_enabled = TRUE; + ecc_enabled = true; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { ecc = spd_read(iic0_dimm_addr[dimm_num], 11); if (ecc != 0x02) { - ecc_enabled = FALSE; + ecc_enabled = false; } /* @@ -437,7 +435,7 @@ static void program_cfg0(unsigned long *dimm_populated, /* * program Memory Data Error Checking */ - if (ecc_enabled == TRUE) { + if (ecc_enabled == true) { cfg0 |= SDRAM_CFG0_MCHK_GEN; } else { cfg0 |= SDRAM_CFG0_MCHK_NON; @@ -493,7 +491,7 @@ static void program_rtr(unsigned long *dimm_populated, bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12); switch (refresh_rate_type) { case 0x00: @@ -585,15 +583,15 @@ static void program_tr0(unsigned long *dimm_populated, t_rp_ns = 0; t_rcd_ns = 0; t_ras_ns = 0; - cas_2_0_available = TRUE; - cas_2_5_available = TRUE; - cas_3_0_available = TRUE; + cas_2_0_available = true; + cas_2_5_available = true; + cas_3_0_available = true; tcyc_2_0_ns_x_10 = 0; tcyc_2_5_ns_x_10 = 0; tcyc_3_0_ns_x_10 = 0; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15); t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2; t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2; @@ -640,7 +638,7 @@ static void program_tr0(unsigned long *dimm_populated, if (cas_index != 0) { cas_index++; } - cas_3_0_available = FALSE; + cas_3_0_available = false; } if (((cas_bit & 0x08) != 0) || (cas_index < 3)) { @@ -650,7 +648,7 @@ static void program_tr0(unsigned long *dimm_populated, if (cas_index != 0) { cas_index++; } - cas_2_5_available = FALSE; + cas_2_5_available = false; } if (((cas_bit & 0x04) != 0) || (cas_index < 3)) { @@ -660,7 +658,7 @@ static void program_tr0(unsigned long *dimm_populated, if (cas_index != 0) { cas_index++; } - cas_2_0_available = FALSE; + cas_2_0_available = false; } break; @@ -683,13 +681,13 @@ static void program_tr0(unsigned long *dimm_populated, /* * Program SD_CASL field */ - if ((cas_2_0_available == TRUE) && + if ((cas_2_0_available == true) && (bus_period_x_10 >= tcyc_2_0_ns_x_10)) { tr0 |= SDRAM_TR0_SDCL_2_0_CLK; - } else if ((cas_2_5_available == TRUE) && + } else if ((cas_2_5_available == true) && (bus_period_x_10 >= tcyc_2_5_ns_x_10)) { tr0 |= SDRAM_TR0_SDCL_2_5_CLK; - } else if ((cas_3_0_available == TRUE) && + } else if ((cas_3_0_available == true) && (bus_period_x_10 >= tcyc_3_0_ns_x_10)) { tr0 |= SDRAM_TR0_SDCL_3_0_CLK; } else { @@ -950,9 +948,9 @@ static void program_tr1(void) current_fail_length = 0; current_start = 0; rdclt_offset = 0; - window_found = FALSE; - fail_found = FALSE; - pass_found = FALSE; + window_found = false; + fail_found = false; + pass_found = false; debug("Starting memory test "); for (k = 0; k < NUMHALFCYCLES; k++) { @@ -963,8 +961,8 @@ static void program_tr1(void) mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); if (short_mem_test()) { - if (fail_found == TRUE) { - pass_found = TRUE; + if (fail_found == true) { + pass_found = true; if (current_pass_length == 0) { current_start = rdclt_offset + rdclt; } @@ -983,10 +981,10 @@ static void program_tr1(void) current_fail_length++; if (current_fail_length >= (dly_val>>2)) { - if (fail_found == FALSE) { - fail_found = TRUE; - } else if (pass_found == TRUE) { - window_found = TRUE; + if (fail_found == false) { + fail_found = true; + } else if (pass_found == true) { + window_found = true; break; } } @@ -994,9 +992,8 @@ static void program_tr1(void) } debug("."); - if (window_found == TRUE) { + if (window_found == true) break; - } tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK; rdclt_offset += dly_val; @@ -1006,7 +1003,7 @@ static void program_tr1(void) /* * make sure we find the window */ - if (window_found == FALSE) { + if (window_found == false) { printf("ERROR: Cannot determine a common read delay.\n"); spd_ddr_init_hang (); } @@ -1115,7 +1112,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, bank_base_addr = CONFIG_SYS_SDRAM_BASE; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3); num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); num_banks = spd_read(iic0_dimm_addr[dimm_num], 5); diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index 85217ea272..def7ebf722 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -241,13 +241,6 @@ void board_add_ram_info(int use_default) /*-----------------------------------------------------------------------------+ * Defines *-----------------------------------------------------------------------------*/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #define SDRAM_DDR1 1 #define SDRAM_DDR2 2 #define SDRAM_NONE 0 @@ -683,7 +676,7 @@ static void get_spd_info(unsigned long *dimm_populated, unsigned char num_of_bytes; unsigned char total_size; - dimm_found = FALSE; + dimm_found = false; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { num_of_bytes = 0; total_size = 0; @@ -696,16 +689,16 @@ static void get_spd_info(unsigned long *dimm_populated, iic0_dimm_addr[dimm_num], total_size); if ((num_of_bytes != 0) && (total_size != 0)) { - dimm_populated[dimm_num] = TRUE; - dimm_found = TRUE; + dimm_populated[dimm_num] = true; + dimm_found = true; debug("DIMM slot %lu: populated\n", dimm_num); } else { - dimm_populated[dimm_num] = FALSE; + dimm_populated[dimm_num] = false; debug("DIMM slot %lu: Not populated\n", dimm_num); } } - if (dimm_found == FALSE) { + if (dimm_found == false) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); spd_ddr_init_hang (); } @@ -724,7 +717,7 @@ static void check_mem_type(unsigned long *dimm_populated, unsigned long dimm_type; for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == TRUE) { + if (dimm_populated[dimm_num] == true) { dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); switch (dimm_type) { case 1: @@ -994,14 +987,14 @@ static void program_copt1(unsigned long *dimm_populated, unsigned long val; #ifdef CONFIG_DDR_ECC - ecc_enabled = TRUE; + ecc_enabled = true; #else - ecc_enabled = FALSE; + ecc_enabled = false; #endif - dimm_32bit = FALSE; - dimm_64bit = FALSE; - buf0 = FALSE; - buf1 = FALSE; + dimm_32bit = false; + dimm_64bit = false; + buf0 = false; + buf1 = false; /*------------------------------------------------------------------ * Set memory controller options reg 1, SDRAM_MCOPT1. @@ -1026,7 +1019,7 @@ static void program_copt1(unsigned long *dimm_populated, /* test ecc support */ ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11); if (ecc != 0x02) /* ecc not supported */ - ecc_enabled = FALSE; + ecc_enabled = false; /* test bank count */ bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17); @@ -1048,15 +1041,15 @@ static void program_copt1(unsigned long *dimm_populated, if (registered == 1) { /* DDR2 always buffered */ /* TODO: what about above comments ? */ mcopt1 |= SDRAM_MCOPT1_RDEN; - buf0 = TRUE; + buf0 = true; } else { /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */ if ((attribute & 0x02) == 0x00) { /* buffered not supported */ - buf0 = FALSE; + buf0 = false; } else { mcopt1 |= SDRAM_MCOPT1_RDEN; - buf0 = TRUE; + buf0 = true; } } } @@ -1068,14 +1061,14 @@ static void program_copt1(unsigned long *dimm_populated, if (registered == 1) { /* DDR2 always buffered */ mcopt1 |= SDRAM_MCOPT1_RDEN; - buf1 = TRUE; + buf1 = true; } else { if ((attribute & 0x02) == 0x00) { /* buffered not supported */ - buf1 = FALSE; + buf1 = false; } else { mcopt1 |= SDRAM_MCOPT1_RDEN; - buf1 = TRUE; + buf1 = true; } } } @@ -1087,11 +1080,11 @@ static void program_copt1(unsigned long *dimm_populated, switch (data_width) { case 72: case 64: - dimm_64bit = TRUE; + dimm_64bit = true; break; case 40: case 32: - dimm_32bit = TRUE; + dimm_32bit = true; break; default: printf("WARNING: Detected a DIMM with a data width of %lu bits.\n", @@ -1110,20 +1103,19 @@ static void program_copt1(unsigned long *dimm_populated, } } - if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { + if ((dimm_64bit == true) && (dimm_32bit == true)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); spd_ddr_init_hang (); - } - else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { + } else if ((dimm_64bit == true) && (dimm_32bit == false)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; - } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) { + } else if ((dimm_64bit == false) && (dimm_32bit == true)) { mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); spd_ddr_init_hang (); } - if (ecc_enabled == TRUE) + if (ecc_enabled == true) mcopt1 |= SDRAM_MCOPT1_MCHK_GEN; else mcopt1 |= SDRAM_MCOPT1_MCHK_NON; @@ -1171,14 +1163,14 @@ static void program_codt(unsigned long *dimm_populated, total_rank += dimm_rank; total_dimm++; if ((dimm_num == 0) && (total_dimm == 1)) - firstSlot = TRUE; + firstSlot = true; else - firstSlot = FALSE; + firstSlot = false; } } if (dimm_type == SDRAM_DDR2) { codt |= SDRAM_CODT_DQS_1_8_V_DDR2; - if ((total_dimm == 1) && (firstSlot == TRUE)) { + if ((total_dimm == 1) && (firstSlot == true)) { if (total_rank == 1) { /* PUUU */ codt |= CALC_ODT_R(0); modt0 = CALC_ODT_W(0); @@ -1193,7 +1185,7 @@ static void program_codt(unsigned long *dimm_populated, modt2 = 0x00000000; modt3 = 0x00000000; } - } else if ((total_dimm == 1) && (firstSlot != TRUE)) { + } else if ((total_dimm == 1) && (firstSlot != true)) { if (total_rank == 1) { /* UUPU */ codt |= CALC_ODT_R(2); modt0 = 0x00000000; @@ -1467,26 +1459,26 @@ static void program_mode(unsigned long *dimm_populated, * the dimm modules installed. *-----------------------------------------------------------------*/ t_wr_ns = 0; - cas_2_0_available = TRUE; - cas_2_5_available = TRUE; - cas_3_0_available = TRUE; - cas_4_0_available = TRUE; - cas_5_0_available = TRUE; + cas_2_0_available = true; + cas_2_5_available = true; + cas_3_0_available = true; + cas_4_0_available = true; + cas_5_0_available = true; max_2_0_tcyc_ns_x_100 = 10; max_2_5_tcyc_ns_x_100 = 10; max_3_0_tcyc_ns_x_100 = 10; max_4_0_tcyc_ns_x_100 = 10; max_5_0_tcyc_ns_x_100 = 10; - sdram_ddr1 = TRUE; + sdram_ddr1 = true; /* loop through all the DIMM slots on the board */ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { /* If a dimm is installed in a particular slot ... */ if (dimm_populated[dimm_num] != SDRAM_NONE) { if (dimm_populated[dimm_num] == SDRAM_DDR1) - sdram_ddr1 = TRUE; + sdram_ddr1 = true; else - sdram_ddr1 = FALSE; + sdram_ddr1 = false; cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit); @@ -1543,7 +1535,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_4_0_available = FALSE; + cas_4_0_available = false; } if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && @@ -1554,7 +1546,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_3_0_available = FALSE; + cas_3_0_available = false; } if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && @@ -1565,7 +1557,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_2_5_available = FALSE; + cas_2_5_available = false; } if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && @@ -1576,7 +1568,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_2_0_available = FALSE; + cas_2_0_available = false; } } else { /* @@ -1592,7 +1584,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_5_0_available = FALSE; + cas_5_0_available = false; } if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && @@ -1603,7 +1595,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_4_0_available = FALSE; + cas_4_0_available = false; } if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && @@ -1614,7 +1606,7 @@ static void program_mode(unsigned long *dimm_populated, } else { if (cas_index != 0) cas_index++; - cas_3_0_available = FALSE; + cas_3_0_available = false; } } } @@ -1636,14 +1628,17 @@ static void program_mode(unsigned long *dimm_populated, debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk); debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk); - if (sdram_ddr1 == TRUE) { /* DDR1 */ - if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) { + if (sdram_ddr1 == true) { /* DDR1 */ + if ((cas_2_0_available == true) && + (sdram_freq <= cycle_2_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK; *selected_cas = DDR_CAS_2; - } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) { + } else if ((cas_2_5_available == true) && + (sdram_freq <= cycle_2_5_clk)) { mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK; *selected_cas = DDR_CAS_2_5; - } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) { + } else if ((cas_3_0_available == true) && + (sdram_freq <= cycle_3_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK; *selected_cas = DDR_CAS_3; } else { @@ -1656,13 +1651,16 @@ static void program_mode(unsigned long *dimm_populated, debug("cas_3_0_available=%d\n", cas_3_0_available); debug("cas_4_0_available=%d\n", cas_4_0_available); debug("cas_5_0_available=%d\n", cas_5_0_available); - if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) { + if ((cas_3_0_available == true) && + (sdram_freq <= cycle_3_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK; *selected_cas = DDR_CAS_3; - } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) { + } else if ((cas_4_0_available == true) && + (sdram_freq <= cycle_4_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK; *selected_cas = DDR_CAS_4; - } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) { + } else if ((cas_5_0_available == true) && + (sdram_freq <= cycle_5_0_clk)) { mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK; *selected_cas = DDR_CAS_5; } else { @@ -1677,7 +1675,7 @@ static void program_mode(unsigned long *dimm_populated, } } - if (sdram_ddr1 == TRUE) + if (sdram_ddr1 == true) mmode |= SDRAM_MMODE_WR_DDR1; else { @@ -1851,16 +1849,16 @@ static void program_tr(unsigned long *dimm_populated, t_wpc_ns = 0; t_wtr_ns = 0; t_rpc_ns = 0; - sdram_ddr1 = TRUE; + sdram_ddr1 = true; /* loop through all the DIMM slots on the board */ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { /* If a dimm is installed in a particular slot ... */ if (dimm_populated[dimm_num] != SDRAM_NONE) { if (dimm_populated[dimm_num] == SDRAM_DDR2) - sdram_ddr1 = TRUE; + sdram_ddr1 = true; else - sdram_ddr1 = FALSE; + sdram_ddr1 = false; t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2); t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2); @@ -1925,7 +1923,7 @@ static void program_tr(unsigned long *dimm_populated, break; } - if (sdram_ddr1 == TRUE) { /* DDR1 */ + if (sdram_ddr1 == true) { /* DDR1 */ if (sdram_freq < 200000000) { sdtr2 |= SDRAM_SDTR2_WTR_1_CLK; sdtr2 |= SDRAM_SDTR2_WPC_2_CLK; @@ -2548,8 +2546,8 @@ calibration_loop: current_pass_length = 0; current_fail_length = 0; current_start = 0; - fail_found = FALSE; - pass_found = FALSE; + fail_found = false; + pass_found = false; /* * get the delay line calibration register value @@ -2570,8 +2568,8 @@ calibration_loop: * See if the rffd value passed. *-----------------------------------------------------------------*/ if (short_mem_test()) { - if (fail_found == TRUE) { - pass_found = TRUE; + if (fail_found == true) { + pass_found = true; if (current_pass_length == 0) current_start = rffd; @@ -2589,11 +2587,10 @@ calibration_loop: current_fail_length++; if (current_fail_length >= (dly_val >> 2)) { - if (fail_found == FALSE) { - fail_found = TRUE; - } else if (pass_found == TRUE) { + if (fail_found == false) + fail_found = true; + else if (pass_found == true) break; - } } } } /* for rffd */ @@ -2618,9 +2615,9 @@ calibration_loop: current_pass_length = 0; current_fail_length = 0; current_start = 0; - window_found = FALSE; - fail_found = FALSE; - pass_found = FALSE; + window_found = false; + fail_found = false; + pass_found = false; for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) { mfsdram(SDRAM_RQDC, rqdc_reg); @@ -2635,8 +2632,8 @@ calibration_loop: * See if the rffd value passed. *-----------------------------------------------------------------*/ if (short_mem_test()) { - if (fail_found == TRUE) { - pass_found = TRUE; + if (fail_found == true) { + pass_found = true; if (current_pass_length == 0) current_start = rqfd; @@ -2653,10 +2650,10 @@ calibration_loop: current_pass_length = 0; current_fail_length++; - if (fail_found == FALSE) { - fail_found = TRUE; - } else if (pass_found == TRUE) { - window_found = TRUE; + if (fail_found == false) { + fail_found = true; + } else if (pass_found == true) { + window_found = true; break; } } @@ -2667,7 +2664,7 @@ calibration_loop: /*------------------------------------------------------------------ * Make sure we found the valid read passing window. Halt if not *-----------------------------------------------------------------*/ - if (window_found == FALSE) { + if (window_found == false) { if (rqfd_start < SDRAM_RQDC_RQFD_MAX) { putc('\b'); putc(slash[loopi++ % 8]); @@ -2769,13 +2766,13 @@ static void test(void) mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_NON); - window_found = FALSE; - begin_found[0] = FALSE; - end_found[0] = FALSE; - search_end[0] = FALSE; - begin_found[1] = FALSE; - end_found[1] = FALSE; - search_end[1] = FALSE; + window_found = false; + begin_found[0] = false; + end_found[0] = false; + search_end[0] = false; + begin_found[1] = false; + end_found[1] = false; + search_end[1] = false; for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]); @@ -2812,32 +2809,32 @@ static void test(void) * See if the rffd value passed. *-----------------------------------------------------------------*/ if (i < NUMMEMTESTS) { - if ((end_found[dimm_num] == FALSE) && - (search_end[dimm_num] == TRUE)) { - end_found[dimm_num] = TRUE; + if ((end_found[dimm_num] == false) && + (search_end[dimm_num] == true)) { + end_found[dimm_num] = true; } - if ((end_found[0] == TRUE) && - (end_found[1] == TRUE)) + if ((end_found[0] == true) && + (end_found[1] == true)) break; } else { - if (begin_found[dimm_num] == FALSE) { - begin_found[dimm_num] = TRUE; - search_end[dimm_num] = TRUE; + if (begin_found[dimm_num] == false) { + begin_found[dimm_num] = true; + search_end[dimm_num] = true; } } } else { - begin_found[dimm_num] = TRUE; - end_found[dimm_num] = TRUE; + begin_found[dimm_num] = true; + end_found[dimm_num] = true; } } - if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE)) - window_found = TRUE; + if ((begin_found[0] == true) && (begin_found[1] == true)) + window_found = true; /*------------------------------------------------------------------ * Make sure we found the valid read passing window. Halt if not *-----------------------------------------------------------------*/ - if (window_found == FALSE) { + if (window_found == false) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); spd_ddr_init_hang (); diff --git a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c index ce769a7156..3ceab32e43 100644 --- a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c @@ -53,13 +53,6 @@ /*-----------------------------------------------------------------------------+ * Defines *-----------------------------------------------------------------------------*/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #define MAXDIMMS 2 #define MAXRANKS 2 @@ -279,7 +272,7 @@ static void get_spd_info(unsigned long dimm_ranks[], unsigned long num_dimm_banks) { unsigned long dimm_num; - unsigned long dimm_found = FALSE; + unsigned long dimm_found = false; unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1; unsigned char num_of_bytes; unsigned char total_size; @@ -334,7 +327,7 @@ static void get_spd_info(unsigned long dimm_ranks[], "\n\n"); spd_ddr_init_hang(); } - dimm_found = TRUE; + dimm_found = true; debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM" "\n", dimm_num, ranks_on_dimm); if (ranks_on_dimm > max_ranks_per_dimm) { @@ -355,7 +348,7 @@ static void get_spd_info(unsigned long dimm_ranks[], debug("DIMM slot %lu: Not populated\n", dimm_num); } } - if (dimm_found == FALSE) { + if (dimm_found == false) { printf("ERROR: No memory installed.\n"); printf("Install at least one DDR2 DIMM.\n\n"); spd_ddr_init_hang(); @@ -882,7 +875,7 @@ static void program_ddr0_22(unsigned long dimm_ranks[], /* Check for ECC */ if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) & 0x02)) { - ecc_available = FALSE; + ecc_available = false; } } } diff --git a/arch/powerpc/lib/ticks.S b/arch/powerpc/lib/ticks.S index 17810395b8..63114bb0c5 100644 --- a/arch/powerpc/lib/ticks.S +++ b/arch/powerpc/lib/ticks.S @@ -50,19 +50,24 @@ wait_ticks: stwu r1, -16(r1) mflr r0 /* save link register */ stw r0, 20(r1) /* Use r0 or GDB will be unhappy */ - mr r7, r3 /* save tick count */ + stw r14, 12(r1) /* save used registers */ + stw r15, 8(r1) + mr r14, r3 /* save tick count */ bl get_ticks /* Get start time */ /* Calculate end time */ - addc r7, r4, r7 /* Compute end time lower */ - addze r6, r3 /* and end time upper */ + addc r14, r4, r14 /* Compute end time lower */ + addze r15, r3 /* and end time upper */ WATCHDOG_RESET /* Trigger watchdog, if needed */ 1: bl get_ticks /* Get current time */ - subfc r4, r4, r7 /* Subtract current time from end time */ - subfe. r3, r3, r6 + subfc r4, r4, r14 /* Subtract current time from end time */ + subfe. r3, r3, r15 bge 1b /* Loop until time expired */ - mtlr r0 /* restore link register */ + lwz r15, 8(r1) /* restore saved registers */ + lwz r14, 12(r1) + lwz r0, 20(r1) addi r1,r1,16 + mtlr r0 blr diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug index 92901b1b94..592d9e3195 100644 --- a/board/LEOX/elpt860/u-boot.lds.debug +++ b/board/LEOX/elpt860/u-boot.lds.debug @@ -134,6 +134,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/Marvell/common/memory.c b/board/Marvell/common/memory.c index 7fd6355236..1400604142 100644 --- a/board/Marvell/common/memory.c +++ b/board/Marvell/common/memory.c @@ -383,7 +383,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device) * OUTPUT: * None. * RETURN: -* False for invalid size, true otherwise. +* false for invalid size, true otherwise. * * CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!! * @@ -509,7 +509,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase, * None. * * RETURN: -* False for invalid size, true otherwise. +* false for invalid size, true otherwise. * * CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!! * @@ -624,7 +624,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase, * None. * * RETURN: -* False for invalid size, true otherwise. +* false for invalid size, true otherwise. * *******************************************************************************/ bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase, @@ -885,7 +885,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress) * None. * * RETURN: -* False for invalid size, true otherwise. +* false for invalid size, true otherwise. * *******************************************************************************/ bool memorySetProtectRegion (MEMORY_PROTECT_WINDOW window, @@ -1380,7 +1380,7 @@ void MemoryEnableWindow (MEMORY_WINDOW window) * OUTPUT: * None. * RETURN: -* True for a closed window, false otherwise . +* true for a closed window, false otherwise . *******************************************************************************/ MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus (MEMORY_WINDOW window) { diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c index 7ad6ae8c0e..9227e5cb1f 100644 --- a/board/Marvell/db64360/mpsc.c +++ b/board/Marvell/db64360/mpsc.c @@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value) * None. * * RETURN: -* True for success, false otherwise. +* true for success, false otherwise. * *******************************************************************************/ diff --git a/board/Marvell/db64360/mv_eth.h b/board/Marvell/db64360/mv_eth.h index bd8e05dafd..d7de9d9796 100644 --- a/board/Marvell/db64360/mv_eth.h +++ b/board/Marvell/db64360/mv_eth.h @@ -46,13 +46,6 @@ ************************************************************************** ************************************************************************** *************************************************************************/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ #ifndef MAX_SKB_FRAGS #define MAX_SKB_FRAGS 0 diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c index 303a63615f..45e13b8fe2 100644 --- a/board/Marvell/db64460/mpsc.c +++ b/board/Marvell/db64460/mpsc.c @@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value) * None. * * RETURN: -* True for success, false otherwise. +* true for success, false otherwise. * *******************************************************************************/ diff --git a/board/Marvell/db64460/mv_eth.h b/board/Marvell/db64460/mv_eth.h index af4e818fe8..1107e959ba 100644 --- a/board/Marvell/db64460/mv_eth.h +++ b/board/Marvell/db64460/mv_eth.h @@ -47,13 +47,6 @@ ************************************************************************** ************************************************************************** *************************************************************************/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ #ifndef MAX_SKB_FRAGS #define MAX_SKB_FRAGS 0 diff --git a/board/Marvell/include/core.h b/board/Marvell/include/core.h index c41343919e..3119d0a073 100644 --- a/board/Marvell/include/core.h +++ b/board/Marvell/include/core.h @@ -91,11 +91,6 @@ extern unsigned int INTERNAL_REG_BASE_ADDR; #define _1G 0x40000000 #define _2G 0x80000000 -#ifndef BOOL_WAS_DEFINED -#define BOOL_WAS_DEFINED -typedef enum _bool{false,true} bool; -#endif - /* Little to Big endian conversion macros */ #ifdef LE /* Little Endian */ diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug index e88bd977d9..40f17e9d5f 100644 --- a/board/RPXClassic/u-boot.lds.debug +++ b/board/RPXClassic/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug index e88bd977d9..40f17e9d5f 100644 --- a/board/RPXlite/u-boot.lds.debug +++ b/board/RPXlite/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug index 88c410cd92..7b89b4f6a5 100644 --- a/board/RPXlite_dw/u-boot.lds.debug +++ b/board/RPXlite_dw/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ait/cam_enc_4xx/cam_enc_4xx.c b/board/ait/cam_enc_4xx/cam_enc_4xx.c index 32b28f9270..644c445693 100644 --- a/board/ait/cam_enc_4xx/cam_enc_4xx.c +++ b/board/ait/cam_enc_4xx/cam_enc_4xx.c @@ -561,7 +561,8 @@ static char *menu_handle(struct menu_display *display) char *s; char temp[6][200]; - m = menu_create(display->title, display->timeout, 1, ait_menu_print); + m = menu_create(display->title, display->timeout, 1, ait_menu_print, + NULL, NULL); for (i = 0; display->menulist[i]; i++) { sprintf(key, "%d", i + 1); diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 79788a80fc..6f5d0a60a3 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -477,16 +477,16 @@ int is_powerpc440ep_pass1(void) pvr = get_pvr(); if (pvr == PVR_POWERPC_440EP_PASS1) - return TRUE; + return true; else if (pvr == PVR_POWERPC_440EP_PASS2) - return FALSE; + return false; else { printf("brdutil error 3\n"); for (;;) ; } - return(FALSE); + return false; } /*----------------------------------------------------------------------------+ @@ -495,9 +495,9 @@ int is_powerpc440ep_pass1(void) int is_nand_selected(void) { #ifdef CONFIG_BAMBOO_NAND - return TRUE; + return true; #else - return FALSE; + return false; #endif } @@ -507,7 +507,7 @@ int is_nand_selected(void) unsigned char config_on_ebc_cs4_is_small_flash(void) { /* Not implemented yet => returns constant value */ - return TRUE; + return true; } /*----------------------------------------------------------------------------+ @@ -561,7 +561,7 @@ void ext_bus_cntlr_init(void) /*-------------------------------------------------------------------------+ | PPC440EP Pass1 +-------------------------------------------------------------------------*/ - if (is_powerpc440ep_pass1() == TRUE) { + if (is_powerpc440ep_pass1() == true) { switch(bootstrap_settings) { case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0: /* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */ @@ -738,7 +738,7 @@ void ext_bus_cntlr_init(void) /*------------------------------------------------------------------------- */ ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH; ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0; - if ((is_nand_selected()) == TRUE) { + if ((is_nand_selected()) == true) { /* NAND Flash */ ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; @@ -765,7 +765,7 @@ void ext_bus_cntlr_init(void) /*------------------------------------------------------------------------- */ ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM; ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0; - if ((is_nand_selected()) == TRUE) { + if ((is_nand_selected()) == true) { /* NAND Flash */ ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; @@ -812,7 +812,7 @@ void ext_bus_cntlr_init(void) ebc0_cs0_bnap_value = 0; ebc0_cs0_bncr_value = 0; - if ((is_nand_selected()) == TRUE) { + if ((is_nand_selected()) == true) { /* NAND Flash */ ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; @@ -830,7 +830,7 @@ void ext_bus_cntlr_init(void) ebc0_cs3_bncr_value = 0; } - if ((config_on_ebc_cs4_is_small_flash()) == TRUE) { + if ((config_on_ebc_cs4_is_small_flash()) == true) { /* Small Flash */ ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH; ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4; diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h index f2b78a9453..6c49733639 100644 --- a/board/amcc/bamboo/bamboo.h +++ b/board/amcc/bamboo/bamboo.h @@ -250,9 +250,6 @@ #define PVR_POWERPC_440EP_PASS1 0x42221850 #define PVR_POWERPC_440EP_PASS2 0x422218D3 -#define TRUE 1 -#define FALSE 0 - #define GPIO0 0 #define GPIO1 1 diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 1fab794bd3..f606d920b5 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -47,9 +47,6 @@ void fpga_init (void); #define DEBUGF(fmt,args...) #endif -#define FALSE 0 -#define TRUE 1 - int board_early_init_f (void) { /*----------------------------------------------------------------------------+ diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h index eb0af94797..f073c0c84b 100644 --- a/board/bf533-ezkit/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -32,8 +32,6 @@ #define V_ULONG(a) (*(volatile unsigned long *)( a )) #define V_BYTE(a) (*(volatile unsigned char *)( a )) -#define TRUE 0x1 -#define FALSE 0x0 #define BUFFER_SIZE 0x80000 #define NO_COMMAND 0 #define GET_CODES 1 diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index ab808d86b0..e4fcd1e39d 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -309,7 +309,7 @@ int read_flash(long nOffset, int *pnValue) nValue = *(volatile unsigned short *)addr; SSYNC(); *pnValue = nValue; - return TRUE; + return true; } int poll_toggle_bit(long lOffset) @@ -398,7 +398,7 @@ int erase_block_flash(int nBlock, unsigned long address) long ulSectorOff = 0x0; if ((nBlock < 0) || (nBlock > AFP_NumSectors)) - return FALSE; + return false; ulSectorOff = (address - CONFIG_SYS_FLASH_BASE); diff --git a/board/bf533-stamp/video.h b/board/bf533-stamp/video.h index 80837e2323..949c3d8f3f 100644 --- a/board/bf533-stamp/video.h +++ b/board/bf533-stamp/video.h @@ -9,9 +9,6 @@ #define YELLOW (0xD292D210) /* yellow pixel pattern */ #define WHITE (0xFE80FE80) /* white pixel pattern */ -#define true 1 -#define false 0 - typedef struct { unsigned int sav; unsigned int eav; diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index 629ce4a505..84c36bafb4 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -91,6 +91,7 @@ static int splash_load_from_nand(u32 bmp_load_addr) res = nand_read_skip_bad(&nand_info[nand_curr_device], splash_screen_nand_offset, &bmp_header_size, + NULL, nand_info[nand_curr_device].size, (u_char *)bmp_load_addr); if (res < 0) return res; @@ -103,6 +104,7 @@ static int splash_load_from_nand(u32 bmp_load_addr) return nand_read_skip_bad(&nand_info[nand_curr_device], splash_screen_nand_offset, &bmp_size, + NULL, nand_info[nand_curr_device].size, (u_char *)bmp_load_addr); splash_address_too_high: diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c index 2f78bad6ea..a004ea1d80 100644 --- a/board/cm_t35/display.c +++ b/board/cm_t35/display.c @@ -381,14 +381,6 @@ static enum display_type env_parse_displaytype(char *displaytype) return NONE; } -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; -void *lcd_base; -short console_col; -short console_row; -void *lcd_console_address; - void lcd_ctrl_init(void *lcdbase) { struct prcm *prcm = (struct prcm *)PRCM_BASE; diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug index e88bd977d9..40f17e9d5f 100644 --- a/board/cogent/u-boot.lds.debug +++ b/board/cogent/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug index 99cbed4b47..1b45e5ea6f 100644 --- a/board/cray/L1/u-boot.lds.debug +++ b/board/cray/L1/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index 614bbb20b6..a33b0a6f1a 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug index 39807d43cc..704e8c91b5 100644 --- a/board/emk/top860/u-boot.lds.debug +++ b/board/emk/top860/u-boot.lds.debug @@ -126,6 +126,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 3dfbf3bc91..1a5f6565e5 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -260,7 +260,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, /* * Big epson detected */ - reg_byte_swap = FALSE; + reg_byte_swap = false; palette_index = 0x1e2; palette_value = 0x1e4; lcd_depth = 16; @@ -269,7 +269,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, /* * Big epson detected (with register swap bug) */ - reg_byte_swap = TRUE; + reg_byte_swap = true; palette_index = 0x1e3; palette_value = 0x1e5; lcd_depth = 16; @@ -278,7 +278,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, /* * Small epson detected (704) */ - reg_byte_swap = FALSE; + reg_byte_swap = false; palette_index = 0x15; palette_value = 0x17; lcd_depth = 8; @@ -287,7 +287,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, /* * Small epson detected (705) */ - reg_byte_swap = FALSE; + reg_byte_swap = false; palette_index = 0x15; palette_value = 0x17; lcd_depth = 8; @@ -300,7 +300,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, /* * S1D13505 detected */ - reg_byte_swap = TRUE; + reg_byte_swap = true; palette_index = 0x25; palette_value = 0x27; lcd_depth = 16; diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h index 01f6019bb2..5c48b5ad5a 100644 --- a/board/esd/common/lcd.h +++ b/board/esd/common/lcd.h @@ -35,11 +35,6 @@ #define LOAD_LONG(data) SWAP_LONG(data) #define LOAD_SHORT(data) SWAP_SHORT(data) -#ifndef FALSE -#define FALSE 0 -#define TRUE (!FALSE) -#endif - #define S1D_WRITE_PALETTE(p,i,r,g,b) \ { \ out_8(&((uchar*)(p))[palette_index], (uchar)(i)); \ diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c index c89426d085..4adcec078a 100644 --- a/board/esd/cpci750/mpsc.c +++ b/board/esd/cpci750/mpsc.c @@ -967,7 +967,7 @@ static int galmpsc_set_snoop (int mpsc, int value) * None. * * RETURN: -* True for success, false otherwise. +* true for success, false otherwise. * *******************************************************************************/ diff --git a/board/esd/cpci750/mv_eth.h b/board/esd/cpci750/mv_eth.h index 3d0cb10dd5..94745bcf03 100644 --- a/board/esd/cpci750/mv_eth.h +++ b/board/esd/cpci750/mv_eth.h @@ -47,13 +47,6 @@ ************************************************************************** ************************************************************************** *************************************************************************/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ #ifndef MAX_SKB_FRAGS #define MAX_SKB_FRAGS 0 diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index 0014808762..ccea7152c2 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -30,10 +30,6 @@ #define OK 0 #define ERROR (-1) -#define TRUE 1 -#define FALSE 0 - - extern u_long pci9054_iobase; @@ -97,7 +93,7 @@ static int PciEepromWriteLongVPD (int offs, unsigned int value) } } - return TRUE; + return true; } diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c index f92bbff291..d38cc96066 100644 --- a/board/esd/pmc440/fpga.c +++ b/board/esd/pmc440/fpga.c @@ -113,7 +113,7 @@ void fpga_serialslave_init(void) { debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__, __LINE__); - fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */ + fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */ } @@ -188,7 +188,7 @@ int fpga_done_fn(int cookie) int fpga_pre_config_fn(int cookie) { debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__); - fpga_reset(TRUE); + fpga_reset(true); /* release init# */ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT); @@ -213,9 +213,9 @@ int fpga_post_config_fn(int cookie) /* enable PLD0..7 pins */ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N); - fpga_reset(TRUE); + fpga_reset(true); udelay (100); - fpga_reset(FALSE); + fpga_reset(false); udelay (100); FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK); @@ -296,7 +296,7 @@ void ngcc_fpga_serialslave_init(void) __FUNCTION__, __LINE__); /* make sure program pin is inactive */ - ngcc_fpga_pgm_fn (FALSE, FALSE, 0); + ngcc_fpga_pgm_fn(false, false, 0); } /* @@ -382,10 +382,10 @@ int ngcc_fpga_pre_config_fn(int cookie) pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__); - ngcc_fpga_reset(TRUE); + ngcc_fpga_reset(true); FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00); - ngcc_fpga_reset(TRUE); + ngcc_fpga_reset(true); return 0; } @@ -401,7 +401,7 @@ int ngcc_fpga_post_config_fn(int cookie) debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__); udelay (100); - ngcc_fpga_reset(FALSE); + ngcc_fpga_reset(false); FPGA_SETBITS(&fpga->ctrla, 0x29f8c000); diff --git a/board/evb64260/eth_addrtbl.c b/board/evb64260/eth_addrtbl.c index e8ef0e3e52..8c2c17f962 100644 --- a/board/evb64260/eth_addrtbl.c +++ b/board/evb64260/eth_addrtbl.c @@ -6,9 +6,6 @@ #include "eth.h" #include "eth_addrtbl.h" -#define TRUE 1 -#define FALSE 0 - #define PRINTF printf #ifdef CONFIG_GT_USE_MAC_HASH_TABLE @@ -160,8 +157,8 @@ u32 hashTableFunction (u32 macH, u32 macL, u32 HashSize, u32 hash_mode) * rd - the RD field in the address table. * Outputs * address table entry is added. - * TRUE if success. - * FALSE if table full + * true if success. + * false if table full */ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip) { @@ -206,7 +203,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip) if (i == HOP_NUMBER) { PRINTF ("addGT64260addressTableEntry: table section is full\n"); - return (FALSE); + return false; } /* @@ -215,7 +212,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip) entry->hi = newHi; entry->lo = newLo; DCACHE_FLUSH_N_SYNC ((u32) entry, MAC_ENTRY_SIZE); - return (TRUE); + return true; } #endif /* CONFIG_GT_USE_MAC_HASH_TABLE */ diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug index 614bbb20b6..a33b0a6f1a 100644 --- a/board/flagadm/u-boot.lds.debug +++ b/board/flagadm/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c index d42c500ca0..4c360096b1 100644 --- a/board/gen860t/fpga.c +++ b/board/gen860t/fpga.c @@ -182,7 +182,7 @@ void fpga_selectmap_init (void) { PRINTF ("%s:%d: Initialize SelectMap interface\n", __FUNCTION__, __LINE__); - fpga_pgm_fn (FALSE, FALSE, 0); /* make sure program pin is inactive */ + fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */ } @@ -314,7 +314,7 @@ int fpga_abort_fn (int cookie) int fpga_pre_config_fn (int cookie) { PRINTF ("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__); - fpga_reset (TRUE); + fpga_reset(true); return 0; } @@ -328,9 +328,9 @@ int fpga_post_config_fn (int cookie) int rc; PRINTF ("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__); - fpga_reset (TRUE); + fpga_reset(true); udelay (1000); - fpga_reset (FALSE); + fpga_reset(false); udelay (1000); /* diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug index a3aeb604cc..cc86941902 100644 --- a/board/genietv/u-boot.lds.debug +++ b/board/genietv/u-boot.lds.debug @@ -138,6 +138,6 @@ SECTIONS { common/env_embedded.o (.ppcenv) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug index 4383c492c3..982b0f3afa 100644 --- a/board/hermes/u-boot.lds.debug +++ b/board/hermes/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug index e88bd977d9..40f17e9d5f 100644 --- a/board/hymod/u-boot.lds.debug +++ b/board/hymod/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug index 9995288517..d5220cc6d5 100644 --- a/board/icu862/u-boot.lds.debug +++ b/board/icu862/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug index 0b34177531..ecc9f26e08 100644 --- a/board/ip860/u-boot.lds.debug +++ b/board/ip860/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug index bae9fb28ee..62c66d7899 100644 --- a/board/ivm/u-boot.lds.debug +++ b/board/ivm/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug index 88c410cd92..7b89b4f6a5 100644 --- a/board/kup/kup4k/u-boot.lds.debug +++ b/board/kup/kup4k/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug index 88c410cd92..7b89b4f6a5 100644 --- a/board/kup/kup4x/u-boot.lds.debug +++ b/board/kup/kup4x/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug index 1d1b76ad7c..cb5ed9c339 100644 --- a/board/lwmon/u-boot.lds.debug +++ b/board/lwmon/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c index 49af384aaa..3ea15a1c04 100644 --- a/board/matrix_vision/mvblx/mvblx.c +++ b/board/matrix_vision/mvblx/mvblx.c @@ -162,7 +162,7 @@ int board_eth_init(bd_t *bis) int overwrite_console(void) { - /* return TRUE if console should be overwritten */ + /* return true if console should be overwritten */ return 0; } diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug index 063f2cc92f..11351176df 100644 --- a/board/mbx8xx/u-boot.lds.debug +++ b/board/mbx8xx/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c index 893f4b7cb8..24f0abddf3 100644 --- a/board/mcc200/lcd.c +++ b/board/mcc200/lcd.c @@ -68,19 +68,6 @@ vidinfo_t panel_info = { LCD_WIDTH, LCD_HEIGHT, LCD_BPP }; -int lcd_line_length; - -int lcd_color_fg; -int lcd_color_bg; - -/* - * Frame buffer memory information - */ -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col = 0; -short console_row = 0; /* * The device we use to communicate with PSoC @@ -88,13 +75,6 @@ short console_row = 0; int serial_inited = 0; /* - * Exported functions - */ -void lcd_initcolregs (void); -void lcd_ctrl_init (void *lcdbase); -void lcd_enable (void); - -/* * Imported functions to support the PSoC protocol */ extern int serial_init_dev (unsigned long dev_base); @@ -156,12 +136,12 @@ void lcd_enable (void) #if !defined(SWAPPED_LCD) for (i=0; i<fb_size; i++) { - serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]); + serial_putc_raw_dev(PSOC_PSC, ((char *)gd->fb_base)[i]); } #else { int x, y, pwidth; - char *p = (char *)lcd_base; + char *p = (char *)gd->fb_base; pwidth = ((panel_info.vl_col+7) >> 3); for (y=0; y<panel_info.vl_row; y++) { diff --git a/board/mousse/flash.c b/board/mousse/flash.c index cc405356dc..5f60c8dfe3 100644 --- a/board/mousse/flash.c +++ b/board/mousse/flash.c @@ -450,7 +450,7 @@ STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len) } /* - * flashWritable returns TRUE if a range contains all F's. + * flashWritable returns true if a range contains all F's. */ STATUS flashWritable (flash_dev_t * dev, int pos, int len) diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram index 5255651347..2055429b4b 100644 --- a/board/mousse/u-boot.lds.ram +++ b/board/mousse/u-boot.lds.ram @@ -96,6 +96,6 @@ SECTIONS common/env_embedded.o (.ppcenv) } > ram - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom index 29a34fb9c5..3c7c544a5b 100644 --- a/board/mousse/u-boot.lds.rom +++ b/board/mousse/u-boot.lds.rom @@ -123,6 +123,6 @@ SECTIONS *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mpl/common/isa.c b/board/mpl/common/isa.c index fc56153b87..66724edf57 100644 --- a/board/mpl/common/isa.c +++ b/board/mpl/common/isa.c @@ -41,13 +41,6 @@ #define PRINTF(fmt,args...) #endif -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #if defined(CONFIG_PIP405) extern int drv_isa_kbd_init (void); @@ -116,9 +109,9 @@ unsigned char open_cfg_super_IO(int address) out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */ out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */ if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */ - return TRUE; + return true; else - return FALSE; + return false; } void close_cfg_super_IO(int address) @@ -179,7 +172,7 @@ void isa_sio_loadtable(void) void isa_sio_setup(void) { - if(open_cfg_super_IO(SIO_CFG_PORT)==TRUE) + if (open_cfg_super_IO(SIO_CFG_PORT) == true) { isa_sio_loadtable(); close_cfg_super_IO(0x3F0); diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 56a84e9afa..89ea27600d 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -77,8 +77,6 @@ DECLARE_GLOBAL_DATA_PTR; #undef SDRAM_DEBUG #define ENABLE_ECC /* for ecc boards */ -#define FALSE 0 -#define TRUE 1 /* stdlib.h causes some compatibility problems; should fixe these! -- wd */ #ifndef __ldiv_t_defined @@ -771,7 +769,8 @@ int last_stage_init (void) int overwrite_console (void) { - return ((in8 (PLD_EXT_CONF_REG) & 0x1)==0); /* return TRUE if console should be overwritten */ + /* return true if console should be overwritten */ + return ((in8(PLD_EXT_CONF_REG) & 0x1) == 0); } diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index 75f57ad8ee..b203037cf9 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; #undef SDRAM_DEBUG -#define FALSE 0 -#define TRUE 1 - /* stdlib.h causes some compatibility problems; should fixe these! -- wd */ #ifndef __ldiv_t_defined typedef struct { @@ -700,7 +697,8 @@ int misc_init_r (void) int overwrite_console (void) { - return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */ + /* return true if console should be overwritten */ + return in8(CONFIG_PORT_ADDR) & 0x1; } @@ -945,7 +943,7 @@ void print_pip405_info (void) void user_led0 (unsigned char on) { - if (on == TRUE) + if (on == true) out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1)); else out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe)); @@ -953,7 +951,7 @@ void user_led0 (unsigned char on) void user_led1 (unsigned char on) { - if (on == TRUE) + if (on == true) out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2)); else out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd)); diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug index 99cbed4b47..1b45e5ea6f 100644 --- a/board/mpl/pip405/u-boot.lds.debug +++ b/board/mpl/pip405/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug index e1fe052c37..5f74337b6d 100644 --- a/board/netphone/u-boot.lds.debug +++ b/board/netphone/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug index e1fe052c37..5f74337b6d 100644 --- a/board/netta/u-boot.lds.debug +++ b/board/netta/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug index e1fe052c37..5f74337b6d 100644 --- a/board/netta2/u-boot.lds.debug +++ b/board/netta2/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug index 3243fc0f36..2fb58972c8 100644 --- a/board/netvia/u-boot.lds.debug +++ b/board/netvia/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug index 614bbb20b6..a33b0a6f1a 100644 --- a/board/nx823/u-boot.lds.debug +++ b/board/nx823/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c index cc05b45038..c6a3af5f3e 100644 --- a/board/prodrive/p3mx/mpsc.c +++ b/board/prodrive/p3mx/mpsc.c @@ -962,7 +962,7 @@ static int galmpsc_set_snoop (int mpsc, int value) * None. * * RETURN: -* True for success, false otherwise. +* true for success, false otherwise. * *******************************************************************************/ diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h index 8cc00dc9c6..58a8cb9207 100644 --- a/board/prodrive/p3mx/mv_eth.h +++ b/board/prodrive/p3mx/mv_eth.h @@ -47,13 +47,6 @@ ************************************************************************** ************************************************************************** *************************************************************************/ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */ #ifndef MAX_SKB_FRAGS #define MAX_SKB_FRAGS 0 diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug index abc4640eef..c4cc39d36e 100644 --- a/board/quantum/u-boot.lds.debug +++ b/board/quantum/u-boot.lds.debug @@ -125,6 +125,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c index 4a7f362c5e..3894a5c1aa 100644 --- a/board/sacsng/clkinit.c +++ b/board/sacsng/clkinit.c @@ -94,11 +94,11 @@ uint Daq_BRG_Get_Div16(uint brg) if (*brg_ptr & CPM_BRG_DIV16) { /* DIV16 active */ - return (TRUE); + return true; } else { /* DIV16 inactive */ - return (FALSE); + return false; } } diff --git a/board/sacsng/clkinit.h b/board/sacsng/clkinit.h index 011638f2fa..68d69db36f 100644 --- a/board/sacsng/clkinit.h +++ b/board/sacsng/clkinit.h @@ -22,11 +22,6 @@ * MA 02111-1307 USA */ -#ifndef FALSE -#define FALSE 0 -#define TRUE (!FALSE) -#endif - #define SLRCLK_EN_MASK 0x00040000 /* PA13 - SLRCLK_EN* */ #define MIN_SAMPLE_RATE 4000 /* Minimum sample rate */ diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug index 6b99f135ad..b3b365e81c 100644 --- a/board/sandburst/karef/u-boot.lds.debug +++ b/board/sandburst/karef/u-boot.lds.debug @@ -141,6 +141,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug index 0b4192e867..412af14f56 100644 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ b/board/sandburst/metrobox/u-boot.lds.debug @@ -141,6 +141,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug index 063f2cc92f..11351176df 100644 --- a/board/spd8xx/u-boot.lds.debug +++ b/board/spd8xx/u-boot.lds.debug @@ -133,6 +133,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/spear/x600/fpga.c b/board/spear/x600/fpga.c index 85eb31be7b..74baa3fc40 100644 --- a/board/spear/x600/fpga.c +++ b/board/spear/x600/fpga.c @@ -113,7 +113,7 @@ static int fpga_done_fn(int cookie) static int fpga_pre_config_fn(int cookie) { debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__); - fpga_reset(TRUE); + fpga_reset(true); return 0; } @@ -128,9 +128,9 @@ static int fpga_post_config_fn(int cookie) debug("%s:%d: FPGA post configuration\n", __func__, __LINE__); - fpga_reset(TRUE); + fpga_reset(true); udelay(100); - fpga_reset(FALSE); + fpga_reset(false); udelay(100); return rc; @@ -200,7 +200,7 @@ static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { static void fpga_serialslave_init(void) { debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__); - fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */ + fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */ } static int expi_setup(int freq) diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug index e1fe052c37..5f74337b6d 100644 --- a/board/stx/stxxtc/u-boot.lds.debug +++ b/board/stx/stxxtc/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/svm_sc8xx/u-boot.lds.debug b/board/svm_sc8xx/u-boot.lds.debug index abc4640eef..c4cc39d36e 100644 --- a/board/svm_sc8xx/u-boot.lds.debug +++ b/board/svm_sc8xx/u-boot.lds.debug @@ -125,6 +125,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index d57678668b..8347cf9ce9 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -179,9 +179,9 @@ int fpga_post_config_fn(int cookie) { debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__); - fpga_reset(TRUE); + fpga_reset(true); udelay(100); - fpga_reset(FALSE); + fpga_reset(false); return 0; } diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 18b7752054..5792bac94f 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -132,6 +132,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index c02581d982..cb26f0dfe1 100644 --- a/board/xes/xpedite1000/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -137,6 +137,6 @@ SECTIONS *(.bss) *(COMMON) } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/common/Makefile b/common/Makefile index 1abf4ea794..0e0fff1ffa 100644 --- a/common/Makefile +++ b/common/Makefile @@ -66,6 +66,7 @@ COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o +COBJS-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o # command @@ -75,6 +76,7 @@ COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o +COBJS-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o diff --git a/common/bedbug.c b/common/bedbug.c index 60109cf827..42ecf61eff 100644 --- a/common/bedbug.c +++ b/common/bedbug.c @@ -72,7 +72,7 @@ int downstring __P ((char *)); * F_INSTR - output raw instruction. * F_LINENO - show line # info if available. * - * Returns TRUE if the area was successfully disassembled or FALSE if + * Returns true if the area was successfully disassembled or false if * a problem was encountered with accessing the memory. */ @@ -137,8 +137,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr, for (i = 0; i < num_instr; ++i, memaddr += 4, ctx.virtual += 4) { #ifdef USE_SOURCE_CODE if (ctx.flags & F_LINENO) { - if ((line_info_from_addr ((Elf32_Word) ctx.virtual, filename, - funcname, &line_no) == TRUE) && + if ((line_info_from_addr ((Elf32_Word) ctx.virtual, + filename, funcname, &line_no) == true) && ((line_no != last_line_no) || (strcmp (last_funcname, funcname) != 0))) { print_source_line (filename, funcname, line_no, pfunc); @@ -154,15 +154,15 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr, #ifdef USE_SOURCE_CODE if (ctx.flags & F_SYMBOL) { if ((symname = - symbol_name_from_addr ((Elf32_Word) ctx.virtual, - TRUE, 0)) != 0) { + symbol_name_from_addr((Elf32_Word) ctx.virtual, + true, 0)) != 0) { cursym = symname; symoffset = 0; } else { if ((cursym == 0) && ((symname = - symbol_name_from_addr ((Elf32_Word) ctx.virtual, - FALSE, &symoffset)) != 0)) { + symbol_name_from_addr((Elf32_Word) ctx.virtual, + false, &symoffset)) != 0)) { cursym = symname; } else { symoffset += 4; @@ -205,7 +205,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr, } if (((ctx.flags & F_SIMPLE) == 0) || - (ctx.op->hfunc == 0) || ((*ctx.op->hfunc) (&ctx) == FALSE)) { + (ctx.op->hfunc == 0) || + ((*ctx.op->hfunc) (&ctx) == false)) { sprintf (&ctx.data[ctx.datalen], "%-7s ", ctx.op->name); ctx.datalen += 8; print_operands (&ctx); @@ -214,7 +215,7 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr, (*pfunc) (ctx.data); } - return TRUE; + return true; } /* disppc */ @@ -364,10 +365,10 @@ int print_operands (struct ppc_ctx *ctx) * value The address of an unsigned long to be filled in * with the value of the operand if it is found. This * will only be filled in if the function returns - * TRUE. This may be passed as 0 if the value is + * true. This may be passed as 0 if the value is * not required. * - * Returns TRUE if the operand was found or FALSE if it was not. + * Returns true if the operand was found or false if it was not. */ int get_operand_value (struct opcode *op, unsigned long instr, @@ -379,7 +380,7 @@ int get_operand_value (struct opcode *op, unsigned long instr, /*------------------------------------------------------------*/ if (field > n_operands) { - return FALSE; /* bad operand ?! */ + return false; /* bad operand ?! */ } /* Walk through the operands and list each in order */ @@ -393,10 +394,10 @@ int get_operand_value (struct opcode *op, unsigned long instr, if (value) { *value = (instr >> opr->shift) & ((1 << opr->bits) - 1); } - return TRUE; + return true; } - return FALSE; + return false; } /* operand_value */ @@ -649,7 +650,7 @@ int tbr_value (char *name) * Arguments: * ctx A pointer to the disassembler context record. * - * Returns TRUE if the simpler form was printed or FALSE if it was not. + * Returns true if the simpler form was printed or false if it was not. */ int handle_bc (struct ppc_ctx *ctx) @@ -669,33 +670,33 @@ int handle_bc (struct ppc_ctx *ctx) /*------------------------------------------------------------*/ - if (get_operand_value (ctx->op, ctx->instr, O_BO, &bo) == FALSE) - return FALSE; + if (get_operand_value(ctx->op, ctx->instr, O_BO, &bo) == false) + return false; - if (get_operand_value (ctx->op, ctx->instr, O_BI, &bi) == FALSE) - return FALSE; + if (get_operand_value(ctx->op, ctx->instr, O_BI, &bi) == false) + return false; if ((bo == 12) && (bi == 0)) { ctx->op = &blt; sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name); ctx->datalen += 8; print_operands (ctx); - return TRUE; + return true; } else if ((bo == 4) && (bi == 10)) { ctx->op = =⃥ sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name); ctx->datalen += 8; print_operands (ctx); - return TRUE; + return true; } else if ((bo == 16) && (bi == 0)) { ctx->op = &bdnz; sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name); ctx->datalen += 8; print_operands (ctx); - return TRUE; + return true; } - return FALSE; + return false; } /* handle_blt */ @@ -719,7 +720,7 @@ int handle_bc (struct ppc_ctx *ctx) * pfunc The address of a function to call to print the output. * * - * Returns TRUE if it was able to output the line info, or false if it was + * Returns true if it was able to output the line info, or false if it was * not. */ @@ -734,7 +735,7 @@ int print_source_line (char *filename, char *funcname, sprintf (out_buf, "%s %s(): line %d", filename, funcname, line_no); (*pfunc) (out_buf); - return TRUE; + return true; } /* print_source_line */ @@ -1039,14 +1040,14 @@ int downstring (char *s) * Arguments: * nextaddr The address (to be filled in) of the next * instruction to execute. This will only be a valid - * address if TRUE is returned. + * address if true is returned. * * step_over A flag indicating how to compute addresses for * branch statements: - * TRUE = Step over the branch (next) - * FALSE = step into the branch (step) + * true = Step over the branch (next) + * false = step into the branch (step) * - * Returns TRUE if it was able to compute the address. Returns FALSE if + * Returns true if it was able to compute the address. Returns false if * it has a problem reading the current instruction or one of the registers. */ @@ -1075,7 +1076,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, if (nextaddr == 0 || regs == 0) { printf ("find_next_address: bad args"); - return FALSE; + return false; } pc = regs->nip & 0xfffffffc; @@ -1083,7 +1084,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, if ((op = find_opcode (instr)) == (struct opcode *) 0) { printf ("find_next_address: can't parse opcode 0x%lx", instr); - return FALSE; + return false; } ctr = regs->ctr; @@ -1100,7 +1101,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, !get_operand_value (op, instr, O_BI, &bi) || !get_operand_value (op, instr, O_AA, &aa) || !get_operand_value (op, instr, O_LK, &lk)) - return FALSE; + return false; if ((addr & (1 << 13)) != 0) addr = addr - (1 << 14); @@ -1116,7 +1117,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, if (!get_operand_value (op, instr, O_LI, &addr) || !get_operand_value (op, instr, O_AA, &aa) || !get_operand_value (op, instr, O_LK, &lk)) - return FALSE; + return false; if ((addr & (1 << 23)) != 0) addr = addr - (1 << 24); @@ -1130,7 +1131,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, if (!get_operand_value (op, instr, O_BO, &bo) || !get_operand_value (op, instr, O_BI, &bi) || !get_operand_value (op, instr, O_LK, &lk)) - return FALSE; + return false; addr = ctr; aa = 1; @@ -1143,7 +1144,7 @@ int find_next_address (unsigned char *nextaddr, int step_over, if (!get_operand_value (op, instr, O_BO, &bo) || !get_operand_value (op, instr, O_BI, &bi) || !get_operand_value (op, instr, O_LK, &lk)) - return FALSE; + return false; addr = lr; aa = 1; @@ -1227,12 +1228,12 @@ int find_next_address (unsigned char *nextaddr, int step_over, step = next = pc + 4; } - if (step_over == TRUE) + if (step_over == true) *(unsigned long *) nextaddr = next; else *(unsigned long *) nextaddr = step; - return TRUE; + return true; } /* find_next_address */ diff --git a/common/board_f.c b/common/board_f.c index 29b49c3ab6..769889123b 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -788,9 +788,6 @@ static init_fnc_t init_sequence_f[] = { /* TODO: can we rename this to timer_init()? */ init_timebase, #endif -#if defined(CONFIG_BOARD_EARLY_INIT_F) - board_early_init_f, -#endif #ifdef CONFIG_ARM timer_init, /* initialize timer */ #endif diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index 9791423205..77b6e3e88e 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -292,7 +292,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs)) + if (!find_next_address((unsigned char *) &addr, false, bug_ctx.regs)) return 1; if (bug_ctx.set) @@ -323,7 +323,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs)) + if (!find_next_address((unsigned char *) &addr, true, bug_ctx.regs)) return 1; if (bug_ctx.set) diff --git a/common/cmd_bootmenu.c b/common/cmd_bootmenu.c new file mode 100644 index 0000000000..a3cbffab24 --- /dev/null +++ b/common/cmd_bootmenu.c @@ -0,0 +1,517 @@ +/* + * (C) Copyright 2011-2013 Pali Rohár <pali.rohar@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <ansi.h> +#include <menu.h> +#include <hush.h> +#include <watchdog.h> +#include <malloc.h> +#include <linux/string.h> + +/* maximum bootmenu entries */ +#define MAX_COUNT 99 + +/* maximal size of bootmenu env + * 9 = strlen("bootmenu_") + * 2 = strlen(MAX_COUNT) + * 1 = NULL term + */ +#define MAX_ENV_SIZE (9 + 2 + 1) + +struct bootmenu_entry { + unsigned short int num; /* unique number 0 .. MAX_COUNT */ + char key[3]; /* key identifier of number */ + char *title; /* title of entry */ + char *command; /* hush command of entry */ + struct bootmenu_data *menu; /* this bootmenu */ + struct bootmenu_entry *next; /* next menu entry (num+1) */ +}; + +struct bootmenu_data { + int delay; /* delay for autoboot */ + int active; /* active menu entry */ + int count; /* total count of menu entries */ + struct bootmenu_entry *first; /* first menu entry */ +}; + +enum bootmenu_key { + KEY_NONE = 0, + KEY_UP, + KEY_DOWN, + KEY_SELECT, +}; + +static char *bootmenu_getoption(unsigned short int n) +{ + char name[MAX_ENV_SIZE] = "bootmenu_"; + + if (n > MAX_COUNT) + return NULL; + + sprintf(name + 9, "%d", n); + return getenv(name); +} + +static void bootmenu_print_entry(void *data) +{ + struct bootmenu_entry *entry = data; + int reverse = (entry->menu->active == entry->num); + + /* + * Move cursor to line where the entry will be drown (entry->num) + * First 3 lines contain bootmenu header + 1 empty line + */ + printf(ANSI_CURSOR_POSITION, entry->num + 4, 1); + + puts(" "); + + if (reverse) + puts(ANSI_COLOR_REVERSE); + + puts(entry->title); + + if (reverse) + puts(ANSI_COLOR_RESET); +} + +static void bootmenu_autoboot_loop(struct bootmenu_data *menu, + enum bootmenu_key *key, int *esc) +{ + int i, c; + + if (menu->delay > 0) { + printf(ANSI_CURSOR_POSITION, menu->count + 5, 1); + printf(" Hit any key to stop autoboot: %2d ", menu->delay); + } + + while (menu->delay > 0) { + for (i = 0; i < 100; ++i) { + if (!tstc()) { + WATCHDOG_RESET(); + mdelay(10); + continue; + } + + menu->delay = -1; + c = getc(); + + switch (c) { + case '\e': + *esc = 1; + *key = KEY_NONE; + break; + case '\r': + *key = KEY_SELECT; + break; + default: + *key = KEY_NONE; + break; + } + + break; + } + + if (menu->delay < 0) + break; + + --menu->delay; + printf("\b\b\b%2d ", menu->delay); + } + + printf(ANSI_CURSOR_POSITION, menu->count + 5, 1); + puts(ANSI_CLEAR_LINE); + + if (menu->delay == 0) + *key = KEY_SELECT; +} + +static void bootmenu_loop(struct bootmenu_data *menu, + enum bootmenu_key *key, int *esc) +{ + int c; + + while (!tstc()) { + WATCHDOG_RESET(); + mdelay(10); + } + + c = getc(); + + switch (*esc) { + case 0: + /* First char of ANSI escape sequence '\e' */ + if (c == '\e') { + *esc = 1; + *key = KEY_NONE; + } + break; + case 1: + /* Second char of ANSI '[' */ + if (c == '[') { + *esc = 2; + *key = KEY_NONE; + } else { + *esc = 0; + } + break; + case 2: + case 3: + /* Third char of ANSI (number '1') - optional */ + if (*esc == 2 && c == '1') { + *esc = 3; + *key = KEY_NONE; + break; + } + + *esc = 0; + + /* ANSI 'A' - key up was pressed */ + if (c == 'A') + *key = KEY_UP; + /* ANSI 'B' - key down was pressed */ + else if (c == 'B') + *key = KEY_DOWN; + /* other key was pressed */ + else + *key = KEY_NONE; + + break; + } + + /* enter key was pressed */ + if (c == '\r') + *key = KEY_SELECT; +} + +static char *bootmenu_choice_entry(void *data) +{ + struct bootmenu_data *menu = data; + struct bootmenu_entry *iter; + enum bootmenu_key key = KEY_NONE; + int esc = 0; + int i; + + while (1) { + if (menu->delay >= 0) { + /* Autoboot was not stopped */ + bootmenu_autoboot_loop(menu, &key, &esc); + } else { + /* Some key was pressed, so autoboot was stopped */ + bootmenu_loop(menu, &key, &esc); + } + + switch (key) { + case KEY_UP: + if (menu->active > 0) + --menu->active; + /* no menu key selected, regenerate menu */ + return NULL; + case KEY_DOWN: + if (menu->active < menu->count - 1) + ++menu->active; + /* no menu key selected, regenerate menu */ + return NULL; + case KEY_SELECT: + iter = menu->first; + for (i = 0; i < menu->active; ++i) + iter = iter->next; + return iter->key; + default: + break; + } + } + + /* never happens */ + debug("bootmenu: this should not happen"); + return NULL; +} + +static void bootmenu_destroy(struct bootmenu_data *menu) +{ + struct bootmenu_entry *iter = menu->first; + struct bootmenu_entry *next; + + while (iter) { + next = iter->next; + free(iter->title); + free(iter->command); + free(iter); + iter = next; + } + free(menu); +} + +static struct bootmenu_data *bootmenu_create(int delay) +{ + unsigned short int i = 0; + const char *option; + struct bootmenu_data *menu; + struct bootmenu_entry *iter = NULL; + + int len; + char *sep; + struct bootmenu_entry *entry; + + menu = malloc(sizeof(struct bootmenu_data)); + if (!menu) + return NULL; + + menu->delay = delay; + menu->active = 0; + menu->first = NULL; + + while ((option = bootmenu_getoption(i))) { + sep = strchr(option, '='); + if (!sep) { + printf("Invalid bootmenu entry: %s\n", option); + break; + } + + entry = malloc(sizeof(struct bootmenu_entry)); + if (!entry) + goto cleanup; + + len = sep-option; + entry->title = malloc(len + 1); + if (!entry->title) { + free(entry); + goto cleanup; + } + memcpy(entry->title, option, len); + entry->title[len] = 0; + + len = strlen(sep + 1); + entry->command = malloc(len + 1); + if (!entry->command) { + free(entry->title); + free(entry); + goto cleanup; + } + memcpy(entry->command, sep + 1, len); + entry->command[len] = 0; + + sprintf(entry->key, "%d", i); + + entry->num = i; + entry->menu = menu; + entry->next = NULL; + + if (!iter) + menu->first = entry; + else + iter->next = entry; + + iter = entry; + ++i; + + if (i == MAX_COUNT - 1) + break; + } + + /* Add U-Boot console entry at the end */ + if (i <= MAX_COUNT - 1) { + entry = malloc(sizeof(struct bootmenu_entry)); + if (!entry) + goto cleanup; + + entry->title = strdup("U-Boot console"); + if (!entry->title) { + free(entry); + goto cleanup; + } + + entry->command = strdup(""); + if (!entry->command) { + free(entry->title); + free(entry); + goto cleanup; + } + + sprintf(entry->key, "%d", i); + + entry->num = i; + entry->menu = menu; + entry->next = NULL; + + if (!iter) + menu->first = entry; + else + iter->next = entry; + + iter = entry; + ++i; + } + + menu->count = i; + return menu; + +cleanup: + bootmenu_destroy(menu); + return NULL; +} + +static void bootmenu_show(int delay) +{ + int init = 0; + void *choice = NULL; + char *title = NULL; + char *command = NULL; + struct menu *menu; + struct bootmenu_data *bootmenu; + struct bootmenu_entry *iter; + char *option, *sep; + + /* If delay is 0 do not create menu, just run first entry */ + if (delay == 0) { + option = bootmenu_getoption(0); + if (!option) { + puts("bootmenu option 0 was not found\n"); + return; + } + sep = strchr(option, '='); + if (!sep) { + puts("bootmenu option 0 is invalid\n"); + return; + } + run_command(sep+1, 0); + return; + } + + bootmenu = bootmenu_create(delay); + if (!bootmenu) + return; + + menu = menu_create(NULL, bootmenu->delay, 1, bootmenu_print_entry, + bootmenu_choice_entry, bootmenu); + if (!menu) { + bootmenu_destroy(bootmenu); + return; + } + + for (iter = bootmenu->first; iter; iter = iter->next) { + if (!menu_item_add(menu, iter->key, iter)) + goto cleanup; + } + + /* Default menu entry is always first */ + menu_default_set(menu, "0"); + + puts(ANSI_CURSOR_HIDE); + puts(ANSI_CLEAR_CONSOLE); + printf(ANSI_CURSOR_POSITION, 1, 1); + + init = 1; + + if (menu_get_choice(menu, &choice)) { + iter = choice; + title = strdup(iter->title); + command = strdup(iter->command); + } + +cleanup: + menu_destroy(menu); + bootmenu_destroy(bootmenu); + + if (init) { + puts(ANSI_CURSOR_SHOW); + puts(ANSI_CLEAR_CONSOLE); + printf(ANSI_CURSOR_POSITION, 1, 1); + } + + if (title && command) { + debug("Starting entry '%s'\n", title); + free(title); + run_command(command, 0); + free(command); + } + +#ifdef CONFIG_POSTBOOTMENU + run_command(CONFIG_POSTBOOTMENU, 0); +#endif +} + +void menu_display_statusline(struct menu *m) +{ + struct bootmenu_entry *entry; + struct bootmenu_data *menu; + + if (menu_default_choice(m, (void *)&entry) < 0) + return; + + menu = entry->menu; + + printf(ANSI_CURSOR_POSITION, 1, 1); + puts(ANSI_CLEAR_LINE); + printf(ANSI_CURSOR_POSITION, 2, 1); + puts(" *** U-Boot Boot Menu ***"); + puts(ANSI_CLEAR_LINE_TO_END); + printf(ANSI_CURSOR_POSITION, 3, 1); + puts(ANSI_CLEAR_LINE); + + /* First 3 lines are bootmenu header + 2 empty lines between entries */ + printf(ANSI_CURSOR_POSITION, menu->count + 5, 1); + puts(ANSI_CLEAR_LINE); + printf(ANSI_CURSOR_POSITION, menu->count + 6, 1); + puts(" Press UP/DOWN to move, ENTER to select"); + puts(ANSI_CLEAR_LINE_TO_END); + printf(ANSI_CURSOR_POSITION, menu->count + 7, 1); + puts(ANSI_CLEAR_LINE); +} + +#ifdef CONFIG_MENU_SHOW +int menu_show(int bootdelay) +{ + bootmenu_show(bootdelay); + return -1; /* -1 - abort boot and run monitor code */ +} +#endif + +int do_bootmenu(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + char *delay_str = NULL; + int delay = 10; + +#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) + delay = CONFIG_BOOTDELAY; +#endif + + if (argc >= 2) + delay_str = argv[1]; + + if (!delay_str) + delay_str = getenv("bootmenu_delay"); + + if (delay_str) + delay = (int)simple_strtol(delay_str, NULL, 10); + + bootmenu_show(delay); + return 0; +} + +U_BOOT_CMD( + bootmenu, 2, 1, do_bootmenu, + "ANSI terminal bootmenu", + "[delay]\n" + " - show ANSI terminal bootmenu with autoboot delay" +); diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index 66e0ef0580..dfa36901e6 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -39,13 +39,6 @@ #define PRINTF(fmt,args...) #endif -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - /*#if defined(CONFIG_CMD_DATE) */ /*#include <rtc.h> */ /*#endif */ @@ -214,9 +207,9 @@ int wait_for_fdc_int(void) timeout--; udelay(10); if(timeout==0) /* timeout occured */ - return FALSE; + return false; } - return TRUE; + return true; } /* reads a byte from the FIFO of the FDC and checks direction and RQM bit @@ -244,7 +237,7 @@ int fdc_need_more_output(void) c=(unsigned char)read_fdc_byte(); printf("Error: more output: %x\n",c); } - return TRUE; + return true; } @@ -260,10 +253,10 @@ int write_fdc_byte(unsigned char val) udelay(10); fdc_need_more_output(); if(timeout==0) /* timeout occured */ - return FALSE; + return false; } write_fdc_reg(FDC_FIFO,val); - return TRUE; + return true; } /* sets up all FDC commands and issues it to the FDC. If @@ -344,9 +337,9 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) } for(i=0;i<pCMD->cmdlen;i++) { /* PRINTF("write cmd%d = 0x%02X\n",i,pCMD->cmd[i]); */ - if(write_fdc_byte(pCMD->cmd[i])==FALSE) { + if (write_fdc_byte(pCMD->cmd[i]) == false) { PRINTF("Error: timeout while issue cmd%d\n",i); - return FALSE; + return false; } } timeout=FDC_TIME_OUT; @@ -355,12 +348,12 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) timeout--; if(timeout==0) { PRINTF(" timeout while reading result%d MSR=0x%02X\n",i,read_fdc_reg(FDC_MSR)); - return FALSE; + return false; } } pCMD->result[i]=(unsigned char)read_fdc_byte(); } - return TRUE; + return true; } /* selects the drive assigned in the cmd structur and @@ -391,9 +384,10 @@ void stop_fdc_drive(FDC_COMMAND_STRUCT *pCMD) int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) { pCMD->cmd[COMMAND]=FDC_CMD_RECALIBRATE; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) - return FALSE; - while(wait_for_fdc_int()!=TRUE); + if (fdc_issue_cmd(pCMD, pFG) == false) + return false; + while (wait_for_fdc_int() != true); + pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; return(fdc_issue_cmd(pCMD,pFG)); } @@ -403,9 +397,10 @@ int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG) { pCMD->cmd[COMMAND]=FDC_CMD_SEEK; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) - return FALSE; - while(wait_for_fdc_int()!=TRUE); + if (fdc_issue_cmd(pCMD, pFG) == false) + return false; + while (wait_for_fdc_int() != true); + pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; return(fdc_issue_cmd(pCMD,pFG)); } @@ -421,7 +416,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) for(i=0;i<7;i++) { pCMD->result[i]=(unsigned char)read_fdc_byte(); } - return TRUE; + return true; } /* reads data from FDC, seek commands are issued automatic */ @@ -440,18 +435,18 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT retriesrw=0; retriescal=0; offset=0; - if(fdc_seek(pCMD,pFG)==FALSE) { + if (fdc_seek(pCMD, pFG) == false) { stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } if((pCMD->result[STATUS_0]&0x20)!=0x20) { printf("Seek error Status: %02X\n",pCMD->result[STATUS_0]); stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } /* now determine the next seek point */ /* lastblk=pCMD->blnr + blocks; */ @@ -466,11 +461,11 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT retryrw: len=sect_size * readblk; pCMD->cmd[COMMAND]=FDC_CMD_READ; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) { + if (fdc_issue_cmd(pCMD, pFG) == false) { stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } for (i=0;i<len;i++) { timeout=FDC_TIME_OUT; @@ -492,15 +487,15 @@ retryrw: stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } else { PRINTF(" trying to recalibrate Try %d\n",retriescal); - if(fdc_recalibrate(pCMD,pFG)==FALSE) { + if (fdc_recalibrate(pCMD, pFG) == false) { stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } retriesrw=0; goto retrycal; @@ -512,7 +507,7 @@ retryrw: } /* else >FDC_RW_RETRIES */ }/* if output */ timeout--; - }while(TRUE); + } while (true); } /* for len */ /* the last sector of a track or all data has been read, * we need to get the results */ @@ -530,22 +525,22 @@ retryrw: readblk=blocks; retrycal: /* a seek is necessary */ - if(fdc_seek(pCMD,pFG)==FALSE) { + if (fdc_seek(pCMD, pFG) == false) { stop_fdc_drive(pCMD); if (flags) enable_interrupts(); - return FALSE; + return false; } if((pCMD->result[STATUS_0]&0x20)!=0x20) { PRINTF("Seek error Status: %02X\n",pCMD->result[STATUS_0]); stop_fdc_drive(pCMD); - return FALSE; + return false; } - }while(TRUE); /* start over */ + } while (true); /* start over */ stop_fdc_drive(pCMD); /* switch off drive */ if (flags) enable_interrupts(); - return TRUE; + return true; } /* Scan all drives and check if drive is present and disk is inserted */ @@ -559,20 +554,20 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) pCMD->drive=drives; select_fdc_drive(pCMD); pCMD->blnr=0; /* set to the 1st block */ - if(fdc_recalibrate(pCMD,pFG)==FALSE) + if (fdc_recalibrate(pCMD, pFG) == false) continue; if((pCMD->result[STATUS_0]&0x10)==0x10) continue; /* ok drive connected check for disk */ state|=(1<<drives); pCMD->blnr=pFG->size; /* set to the last block */ - if(fdc_seek(pCMD,pFG)==FALSE) + if (fdc_seek(pCMD, pFG) == false) continue; pCMD->blnr=0; /* set to the 1st block */ - if(fdc_recalibrate(pCMD,pFG)==FALSE) + if (fdc_recalibrate(pCMD, pFG) == false) continue; pCMD->cmd[COMMAND]=FDC_CMD_READ_ID; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) + if (fdc_issue_cmd(pCMD, pFG) == false) continue; state|=(0x10<<drives); } @@ -584,7 +579,7 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) ((state&(0x10<<i))==(0x10<<i)) ? pFG->name : ""); } pCMD->flags=state; - return TRUE; + return true; } @@ -611,9 +606,9 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) write_fdc_reg(FDC_CCR,pFG->rate); /* then initialize the DSR */ write_fdc_reg(FDC_DSR,pFG->rate); - if(wait_for_fdc_int()==FALSE) { + if (wait_for_fdc_int() == false) { PRINTF("Time Out after writing CCR\n"); - return FALSE; + return false; } /* now issue sense Interrupt and status command * assuming only one drive present (drive 0) */ @@ -621,7 +616,7 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) for(i=0;i<4;i++) { /* issue sense interrupt for all 4 possible drives */ pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) { + if (fdc_issue_cmd(pCMD, pFG) == false) { PRINTF("Sense Interrupt for drive %d failed\n",i); } } @@ -629,24 +624,24 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG) pCMD->drive=drive; select_fdc_drive(pCMD); pCMD->cmd[COMMAND]=FDC_CMD_CONFIGURE; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) { + if (fdc_issue_cmd(pCMD, pFG) == false) { PRINTF(" configure timeout\n"); stop_fdc_drive(pCMD); - return FALSE; + return false; } /* issue specify command */ pCMD->cmd[COMMAND]=FDC_CMD_SPECIFY; - if(fdc_issue_cmd(pCMD,pFG)==FALSE) { + if (fdc_issue_cmd(pCMD, pFG) == false) { PRINTF(" specify timeout\n"); stop_fdc_drive(pCMD); - return FALSE; + return false; } /* then, we clear the reset in the DOR */ /* fdc_check_drive(pCMD,pFG); */ /* write_fdc_reg(FDC_DOR,0x04); */ - return TRUE; + return true; } #if defined(CONFIG_CMD_FDOS) @@ -664,30 +659,30 @@ int fdc_fdos_init (int drive) FDC_COMMAND_STRUCT *pCMD = &cmd; /* setup FDC and scan for drives */ - if(fdc_setup(drive,pCMD,pFG)==FALSE) { + if (fdc_setup(drive, pCMD, pFG) == false) { printf("\n** Error in setup FDC **\n"); - return FALSE; + return false; } - if(fdc_check_drive(pCMD,pFG)==FALSE) { + if (fdc_check_drive(pCMD, pFG) == false) { printf("\n** Error in check_drives **\n"); - return FALSE; + return false; } if((pCMD->flags&(1<<drive))==0) { /* drive not available */ printf("\n** Drive %d not available **\n",drive); - return FALSE; + return false; } if((pCMD->flags&(0x10<<drive))==0) { /* no disk inserted */ printf("\n** No disk inserted in drive %d **\n",drive); - return FALSE; + return false; } /* ok, we have a valid source */ pCMD->drive=drive; /* read first block */ pCMD->blnr=0; - return TRUE; + return true; } /************************************************************************** * int fdc_fdos_seek @@ -747,11 +742,11 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } /* setup FDC and scan for drives */ - if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) { + if (fdc_setup(boot_drive, pCMD, pFG) == false) { printf("\n** Error in setup FDC **\n"); return 1; } - if(fdc_check_drive(pCMD,pFG)==FALSE) { + if (fdc_check_drive(pCMD, pFG) == false) { printf("\n** Error in check_drives **\n"); return 1; } @@ -769,7 +764,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) pCMD->drive=boot_drive; /* read first block */ pCMD->blnr=0; - if(fdc_read_data((unsigned char *)addr,1,pCMD,pFG)==FALSE) { + if (fdc_read_data((unsigned char *)addr, 1, pCMD, pFG) == false) { printf("\nRead error:"); for(i=0;i<7;i++) printf("result%d: 0x%02X\n",i,pCMD->result[i]); @@ -801,7 +796,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) nrofblk++; printf("Loading %ld Bytes (%d blocks) at 0x%08lx..\n",imsize,nrofblk,addr); pCMD->blnr=0; - if(fdc_read_data((unsigned char *)addr,nrofblk,pCMD,pFG)==FALSE) { + if (fdc_read_data((unsigned char *)addr, nrofblk, pCMD, pFG) == false) { /* read image block */ printf("\nRead error:"); for(i=0;i<7;i++) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 8c53a10315..9f3d6c575b 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -164,8 +164,12 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (strcmp(argv[1], "rescan") == 0) { - struct mmc *mmc = find_mmc_device(curr_device); + struct mmc *mmc; + if (argc != 2) + return CMD_RET_USAGE; + + mmc = find_mmc_device(curr_device); if (!mmc) { printf("no mmc device at slot %x\n", curr_device); return 1; @@ -179,8 +183,12 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } else if (strncmp(argv[1], "part", 4) == 0) { block_dev_desc_t *mmc_dev; - struct mmc *mmc = find_mmc_device(curr_device); + struct mmc *mmc; + + if (argc != 2) + return CMD_RET_USAGE; + mmc = find_mmc_device(curr_device); if (!mmc) { printf("no mmc device at slot %x\n", curr_device); return 1; @@ -196,6 +204,8 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) puts("get mmc type error!\n"); return 1; } else if (strcmp(argv[1], "list") == 0) { + if (argc != 2) + return CMD_RET_USAGE; print_mmc_devices('\n'); return 0; } else if (strcmp(argv[1], "dev") == 0) { diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 5192dee8ae..1c35f9dd60 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -106,6 +106,8 @@ #include <onenand_uboot.h> #endif +DECLARE_GLOBAL_DATA_PTR; + /* special size referring to all the remaining space in a partition */ #define SIZE_REMAINING 0xFFFFFFFF @@ -1537,6 +1539,7 @@ static int parse_mtdparts(const char *const mtdparts) const char *p = mtdparts; struct mtd_device *dev; int err = 1; + char tmp_parts[MTDPARTS_MAXLEN]; debug("\n---parse_mtdparts---\nmtdparts = %s\n\n", p); @@ -1547,7 +1550,12 @@ static int parse_mtdparts(const char *const mtdparts) } /* re-read 'mtdparts' variable, mtd_devices_init may be updating env */ - p = getenv("mtdparts"); + if (gd->flags & GD_FLG_ENV_READY) { + p = getenv("mtdparts"); + } else { + p = tmp_parts; + getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN); + } if (strncmp(p, "mtdparts=", 9) != 0) { printf("mtdparts variable doesn't start with 'mtdparts='\n"); @@ -1705,6 +1713,7 @@ int mtdparts_init(void) const char *current_partition; int ids_changed; char tmp_ep[PARTITION_MAXLEN]; + char tmp_parts[MTDPARTS_MAXLEN]; debug("\n---mtdparts_init---\n"); if (!initialized) { @@ -1718,7 +1727,17 @@ int mtdparts_init(void) /* get variables */ ids = getenv("mtdids"); - parts = getenv("mtdparts"); + /* + * The mtdparts variable tends to be long. If we need to access it + * before the env is relocated, then we need to use our own stack + * buffer. gd->env_buf will be too small. + */ + if (gd->flags & GD_FLG_ENV_READY) { + parts = getenv("mtdparts"); + } else { + parts = tmp_parts; + getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN); + } current_partition = getenv("partition"); /* save it for later parsing, cannot rely on current partition pointer diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 32348f3773..e9d3d3c1bf 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -137,7 +137,8 @@ static inline int str2long(const char *p, ulong *num) return *p != '\0' && *endptr == '\0'; } -static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size) +static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size, + loff_t *maxsize) { #ifdef CONFIG_CMD_MTDPARTS struct mtd_device *dev; @@ -160,6 +161,7 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size) *off = part->offset; *size = part->size; + *maxsize = part->size; *idx = dev->id->num; ret = set_dev(*idx); @@ -173,10 +175,11 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size) #endif } -static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize) +static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *size, + loff_t *maxsize) { if (!str2off(arg, off)) - return get_part(arg, idx, off, maxsize); + return get_part(arg, idx, off, size, maxsize); if (*off >= nand_info[*idx].size) { puts("Offset exceeds device limit\n"); @@ -184,36 +187,35 @@ static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize) } *maxsize = nand_info[*idx].size - *off; + *size = *maxsize; return 0; } static int arg_off_size(int argc, char *const argv[], int *idx, - loff_t *off, loff_t *size) + loff_t *off, loff_t *size, loff_t *maxsize) { int ret; - loff_t maxsize = 0; if (argc == 0) { *off = 0; *size = nand_info[*idx].size; + *maxsize = *size; goto print; } - ret = arg_off(argv[0], idx, off, &maxsize); + ret = arg_off(argv[0], idx, off, size, maxsize); if (ret) return ret; - if (argc == 1) { - *size = maxsize; + if (argc == 1) goto print; - } if (!str2off(argv[1], size)) { printf("'%s' is not a number\n", argv[1]); return -1; } - if (*size > maxsize) { + if (*size > *maxsize) { puts("Size exceeds partition or device limit\n"); return -1; } @@ -307,7 +309,8 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[]) if (argc < 3) goto usage; - if (arg_off(argv[2], &idx, &addr, &maxsize)) { + /* We don't care about size, or maxsize. */ + if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize)) { puts("Offset or partition name expected\n"); return 1; } @@ -426,7 +429,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i, ret = 0; ulong addr; - loff_t off, size; + loff_t off, size, maxsize; char *cmd, *s; nand_info_t *nand; #ifdef CONFIG_SYS_NAND_QUIET @@ -551,7 +554,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nNAND %s: ", cmd); /* skip first two or three arguments, look for offset and size */ - if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0) + if (arg_off_size(argc - o, argv + o, &dev, &off, &size, + &maxsize) != 0) return 1; nand = &nand_info[dev]; @@ -619,7 +623,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (s && !strcmp(s, ".raw")) { raw = 1; - if (arg_off(argv[3], &dev, &off, &size)) + if (arg_off(argv[3], &dev, &off, &size, &maxsize)) return 1; if (argc > 4 && !str2long(argv[4], &pagecount)) { @@ -635,7 +639,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rwsize = pagecount * (nand->writesize + nand->oobsize); } else { if (arg_off_size(argc - 3, argv + 3, &dev, - &off, &size) != 0) + &off, &size, &maxsize) != 0) return 1; rwsize = size; @@ -645,9 +649,11 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) ret = nand_read_skip_bad(nand, off, &rwsize, + NULL, maxsize, (u_char *)addr); else ret = nand_write_skip_bad(nand, off, &rwsize, + NULL, maxsize, (u_char *)addr, 0); #ifdef CONFIG_CMD_NAND_TRIMFFS } else if (!strcmp(s, ".trimffs")) { @@ -655,8 +661,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("Unknown nand command suffix '%s'\n", s); return 1; } - ret = nand_write_skip_bad(nand, off, &rwsize, - (u_char *)addr, + ret = nand_write_skip_bad(nand, off, &rwsize, NULL, + maxsize, (u_char *)addr, WITH_DROP_FFS); #endif #ifdef CONFIG_CMD_NAND_YAFFS @@ -665,9 +671,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("Unknown nand command suffix '%s'.\n", s); return 1; } - ret = nand_write_skip_bad(nand, off, &rwsize, - (u_char *)addr, - WITH_INLINE_OOB); + ret = nand_write_skip_bad(nand, off, &rwsize, NULL, + maxsize, (u_char *)addr, + WITH_YAFFS_OOB); #endif } else if (!strcmp(s, ".oob")) { /* out-of-band data */ @@ -775,7 +781,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (s && !strcmp(s, ".allexcept")) allexcept = 1; - if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0) + if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size, + &maxsize) < 0) return 1; if (!nand_unlock(&nand_info[dev], off, size, allexcept)) { @@ -873,7 +880,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset); cnt = nand->writesize; - r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr); + r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size, + (u_char *)addr); if (r) { puts("** Read error\n"); bootstage_error(BOOTSTAGE_ID_NAND_HDR_READ); @@ -905,7 +913,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, } bootstage_mark(BOOTSTAGE_ID_NAND_TYPE); - r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr); + r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size, + (u_char *)addr); if (r) { puts("** Read error\n"); bootstage_error(BOOTSTAGE_ID_NAND_READ); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 947d6c4ed6..afa128ece2 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -62,9 +62,10 @@ DECLARE_GLOBAL_DATA_PTR; !defined(CONFIG_ENV_IS_IN_ONENAND) && \ !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ !defined(CONFIG_ENV_IS_IN_REMOTE) && \ + !defined(CONFIG_ENV_IS_IN_UBI) && \ !defined(CONFIG_ENV_IS_NOWHERE) # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\ -SPI_FLASH|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE +SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE #endif /* @@ -273,6 +274,10 @@ int setenv(const char *varname, const char *varvalue) { const char * const argv[4] = { "setenv", varname, varvalue, NULL }; + /* before import into hashtable */ + if (!(gd->flags & GD_FLG_ENV_READY)) + return 1; + if (varvalue == NULL || varvalue[0] == '\0') return _do_env_set(0, 2, (char * const *)argv); else diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index ee75db9685..2dbd49cbd6 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -1280,7 +1280,8 @@ static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg) /* * Create a menu and add items for all the labels. */ - m = menu_create(cfg->title, cfg->timeout, cfg->prompt, label_print); + m = menu_create(cfg->title, cfg->timeout, cfg->prompt, label_print, + NULL, NULL); if (!m) return NULL; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 266bfa6905..13b3d996f6 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -110,7 +110,7 @@ void scsi_scan(int mode) scsi_dev_desc[i].vendor[0]=0; scsi_dev_desc[i].product[0]=0; scsi_dev_desc[i].revision[0]=0; - scsi_dev_desc[i].removable=FALSE; + scsi_dev_desc[i].removable = false; scsi_dev_desc[i].if_type=IF_TYPE_SCSI; scsi_dev_desc[i].dev=i; scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN; @@ -125,7 +125,7 @@ void scsi_scan(int mode) pccb->pdata=(unsigned char *)&tempbuff; pccb->datalen=512; scsi_setup_inquiry(pccb); - if(scsi_exec(pccb)!=TRUE) { + if (scsi_exec(pccb) != true) { if(pccb->contr_stat==SCSI_SEL_TIME_OUT) { debug ("Selection timeout ID %d\n",pccb->target); continue; /* selection timeout => assuming no device present */ @@ -139,7 +139,7 @@ void scsi_scan(int mode) continue; /* skip unknown devices */ } if((modi&0x80)==0x80) /* drive is removable */ - scsi_dev_desc[scsi_max_devs].removable=TRUE; + scsi_dev_desc[scsi_max_devs].removable=true; /* get info for this device */ scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0], &tempbuff[8], 8); @@ -152,8 +152,8 @@ void scsi_scan(int mode) pccb->datalen=0; scsi_setup_test_unit_ready(pccb); - if(scsi_exec(pccb)!=TRUE) { - if(scsi_dev_desc[scsi_max_devs].removable==TRUE) { + if (scsi_exec(pccb) != true) { + if (scsi_dev_desc[scsi_max_devs].removable == true) { scsi_dev_desc[scsi_max_devs].type=perq; goto removable; } @@ -404,7 +404,7 @@ static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) debug("scsi_read_ext: startblk " LBAF ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); - if(scsi_exec(pccb)!=TRUE) { + if (scsi_exec(pccb) != true) { scsi_print_error(pccb); blkcnt-=blks; break; @@ -458,7 +458,7 @@ static ulong scsi_write(int device, ulong blknr, } debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n", __func__, start, smallblks, buf_addr); - if (scsi_exec(pccb) != TRUE) { + if (scsi_exec(pccb) != true) { scsi_print_error(pccb); blkcnt -= blks; break; @@ -521,7 +521,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ pccb->datalen = 8; - if (scsi_exec(pccb) != TRUE) + if (scsi_exec(pccb) != true) return 1; *capacity = ((lbaint_t)pccb->pdata[0] << 24) | @@ -547,7 +547,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ pccb->datalen = 16; - if (scsi_exec(pccb) != TRUE) + if (scsi_exec(pccb) != true) return 1; *capacity = ((uint64_t)pccb->pdata[0] << 56) | diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 3f0d414954..0a17782d66 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -5,8 +5,8 @@ * Licensed under the GPL-2 or later. */ -#include <div64.h> #include <common.h> +#include <div64.h> #include <malloc.h> #include <spi_flash.h> diff --git a/common/cmd_test.c b/common/cmd_test.c index d4ec18672e..acc0ecf99b 100644 --- a/common/cmd_test.c +++ b/common/cmd_test.c @@ -21,6 +21,15 @@ * MA 02111-1307 USA */ +/* + * Define _STDBOOL_H here to avoid macro expansion of true and false. + * If the future code requires macro true or false, remove this define + * and undef true and false before U_BOOT_CMD. This define and comment + * shall be removed if change to U_BOOT_CMD is made to take string + * instead of stringifying it. + */ +#define _STDBOOL_H + #include <common.h> #include <command.h> diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 35b1d31f9c..5ba4feb485 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -23,6 +23,9 @@ #include <asm/errno.h> #include <jffs2/load_kernel.h> +#undef ubi_msg +#define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__) + #define DEV_TYPE_NONE 0 #define DEV_TYPE_NAND 1 #define DEV_TYPE_ONENAND 2 @@ -263,7 +266,7 @@ out_err: return err; } -static int ubi_volume_write(char *volume, void *buf, size_t size) +int ubi_volume_write(char *volume, void *buf, size_t size) { int err = 1; int rsvd_bytes = 0; @@ -308,12 +311,10 @@ static int ubi_volume_write(char *volume, void *buf, size_t size) ubi_gluebi_updated(vol); } - printf("%d bytes written to volume %s\n", size, volume); - return 0; } -static int ubi_volume_read(char *volume, char *buf, size_t size) +int ubi_volume_read(char *volume, char *buf, size_t size) { int err, lnum, off, len, tbuf_size; void *tbuf; @@ -325,8 +326,6 @@ static int ubi_volume_read(char *volume, char *buf, size_t size) if (vol == NULL) return ENODEV; - printf("Read %d bytes from volume %s to %p\n", size, volume, buf); - if (vol->updating) { printf("updating"); return EBUSY; @@ -431,26 +430,82 @@ static int ubi_dev_scan(struct mtd_info *info, char *ubidev, return 0; } -static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +int ubi_part(char *part_name, const char *vid_header_offset) { - size_t size = 0; - ulong addr = 0; int err = 0; - - if (argc < 2) - return CMD_RET_USAGE; + char mtd_dev[16]; + struct mtd_device *dev; + struct part_info *part; + u8 pnum; if (mtdparts_init() != 0) { printf("Error initializing mtdparts!\n"); return 1; } +#ifdef CONFIG_CMD_UBIFS + /* + * Automatically unmount UBIFS partition when user + * changes the UBI device. Otherwise the following + * UBIFS commands will crash. + */ + if (ubifs_is_mounted()) + cmd_ubifs_umount(); +#endif + + /* todo: get dev number for NAND... */ + ubi_dev.nr = 0; + + /* + * Call ubi_exit() before re-initializing the UBI subsystem + */ + if (ubi_initialized) { + ubi_exit(); + del_mtd_partitions(ubi_dev.mtd_info); + } + + /* + * Search the mtd device number where this partition + * is located + */ + if (find_dev_and_part(part_name, &dev, &pnum, &part)) { + printf("Partition %s not found!\n", part_name); + return 1; + } + sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num); + ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev); + if (IS_ERR(ubi_dev.mtd_info)) { + printf("Partition %s not found on device %s!\n", part_name, + mtd_dev); + return 1; + } + + ubi_dev.selected = 1; + + strcpy(ubi_dev.part_name, part_name); + err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name, + vid_header_offset); + if (err) { + printf("UBI init error %d\n", err); + ubi_dev.selected = 0; + return err; + } + + ubi = ubi_devices[0]; + + return 0; +} + +static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + size_t size = 0; + ulong addr = 0; + + if (argc < 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "part") == 0) { - char mtd_dev[16]; - struct mtd_device *dev; - struct part_info *part; const char *vid_header_offset = NULL; - u8 pnum; /* Print current partition */ if (argc == 2) { @@ -467,58 +522,10 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (argc < 3) return CMD_RET_USAGE; -#ifdef CONFIG_CMD_UBIFS - /* - * Automatically unmount UBIFS partition when user - * changes the UBI device. Otherwise the following - * UBIFS commands will crash. - */ - if (ubifs_is_mounted()) - cmd_ubifs_umount(); -#endif - - /* todo: get dev number for NAND... */ - ubi_dev.nr = 0; - - /* - * Call ubi_exit() before re-initializing the UBI subsystem - */ - if (ubi_initialized) { - ubi_exit(); - del_mtd_partitions(ubi_dev.mtd_info); - } - - /* - * Search the mtd device number where this partition - * is located - */ - if (find_dev_and_part(argv[2], &dev, &pnum, &part)) { - printf("Partition %s not found!\n", argv[2]); - return 1; - } - sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num); - ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev); - if (IS_ERR(ubi_dev.mtd_info)) { - printf("Partition %s not found on device %s!\n", argv[2], mtd_dev); - return 1; - } - - ubi_dev.selected = 1; - if (argc > 3) vid_header_offset = argv[3]; - strcpy(ubi_dev.part_name, argv[2]); - err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name, - vid_header_offset); - if (err) { - printf("UBI init error %d\n", err); - ubi_dev.selected = 0; - return err; - } - - ubi = ubi_devices[0]; - return 0; + return ubi_part(argv[2], vid_header_offset); } if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) { @@ -571,6 +578,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } if (strncmp(argv[1], "write", 5) == 0) { + int ret; + if (argc < 5) { printf("Please see usage\n"); return 1; @@ -579,7 +588,13 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) addr = simple_strtoul(argv[2], NULL, 16); size = simple_strtoul(argv[4], NULL, 16); - return ubi_volume_write(argv[3], (void *)addr, size); + ret = ubi_volume_write(argv[3], (void *)addr, size); + if (!ret) { + printf("%d bytes written to volume %s\n", size, + argv[3]); + } + + return ret; } if (strncmp(argv[1], "read", 4) == 0) { @@ -597,8 +612,12 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) argc--; } - if (argc == 3) + if (argc == 3) { + printf("Read %d bytes from volume %s to %lx\n", size, + argv[3], addr); + return ubi_volume_read(argv[3], (char *)addr, size); + } } printf("Please see usage\n"); diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 2a9d169f92..3c70d5dede 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -201,7 +201,7 @@ MORECORE_FAILURE (default: -1) The value returned upon failure of MORECORE. MORECORE_CLEARS (default 1) - True (1) if the routine mapped to MORECORE zeroes out memory (which + true (1) if the routine mapped to MORECORE zeroes out memory (which holds for sbrk). DEFAULT_TRIM_THRESHOLD DEFAULT_TOP_PAD diff --git a/common/dlmalloc.src b/common/dlmalloc.src index 32a38bc70c..d86acffdea 100644 --- a/common/dlmalloc.src +++ b/common/dlmalloc.src @@ -198,7 +198,7 @@ MORECORE_FAILURE (default: -1) The value returned upon failure of MORECORE. MORECORE_CLEARS (default 1) - True (1) if the routine mapped to MORECORE zeroes out memory (which + true (1) if the routine mapped to MORECORE zeroes out memory (which holds for sbrk). DEFAULT_TRIM_THRESHOLD DEFAULT_TOP_PAD diff --git a/common/env_nand.c b/common/env_nand.c index 5b69889c02..b745822be7 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -281,7 +281,8 @@ int readenv(size_t offset, u_char *buf) } else { char_ptr = &buf[amount_loaded]; if (nand_read_skip_bad(&nand_info[0], offset, - &len, char_ptr)) + &len, NULL, + nand_info[0].size, char_ptr)) return 1; offset += blocksize; diff --git a/common/env_ubi.c b/common/env_ubi.c new file mode 100644 index 0000000000..1ed8b02e86 --- /dev/null +++ b/common/env_ubi.c @@ -0,0 +1,220 @@ +/* + * (c) Copyright 2012 by National Instruments, + * Joe Hershberger <joe.hershberger@ni.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <command.h> +#include <environment.h> +#include <errno.h> +#include <malloc.h> +#include <search.h> +#include <ubi_uboot.h> +#undef crc32 + +char *env_name_spec = "UBI"; + +env_t *env_ptr; + +DECLARE_GLOBAL_DATA_PTR; + +int env_init(void) +{ + /* use default */ + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 1; + + return 0; +} + +#ifdef CONFIG_CMD_SAVEENV +#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT +static unsigned char env_flags; + +int saveenv(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); + ssize_t len; + char *res; + + res = (char *)&env_new->data; + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); + if (len < 0) { + error("Cannot export environment: errno = %d\n", errno); + return 1; + } + + if (ubi_part(CONFIG_ENV_UBI_PART, NULL)) { + printf("\n** Cannot find mtd partition \"%s\"\n", + CONFIG_ENV_UBI_PART); + return 1; + } + + env_new->crc = crc32(0, env_new->data, ENV_SIZE); + env_new->flags = ++env_flags; /* increase the serial */ + + if (gd->env_valid == 1) { + puts("Writing to redundant UBI... "); + if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME_REDUND, + (void *)env_new, CONFIG_ENV_SIZE)) { + printf("\n** Unable to write env to %s:%s **\n", + CONFIG_ENV_UBI_PART, + CONFIG_ENV_UBI_VOLUME_REDUND); + return 1; + } + } else { + puts("Writing to UBI... "); + if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME, + (void *)env_new, CONFIG_ENV_SIZE)) { + printf("\n** Unable to write env to %s:%s **\n", + CONFIG_ENV_UBI_PART, + CONFIG_ENV_UBI_VOLUME); + return 1; + } + } + + puts("done\n"); + + gd->env_valid = gd->env_valid == 2 ? 1 : 2; + + return 0; +} +#else /* ! CONFIG_SYS_REDUNDAND_ENVIRONMENT */ +int saveenv(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); + ssize_t len; + char *res; + + res = (char *)&env_new->data; + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); + if (len < 0) { + error("Cannot export environment: errno = %d\n", errno); + return 1; + } + + if (ubi_part(CONFIG_ENV_UBI_PART, NULL)) { + printf("\n** Cannot find mtd partition \"%s\"\n", + CONFIG_ENV_UBI_PART); + return 1; + } + + env_new->crc = crc32(0, env_new->data, ENV_SIZE); + + if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME, (void *)env_new, + CONFIG_ENV_SIZE)) { + printf("\n** Unable to write env to %s:%s **\n", + CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME); + return 1; + } + + puts("done\n"); + return 0; +} +#endif /* CONFIG_SYS_REDUNDAND_ENVIRONMENT */ +#endif /* CONFIG_CMD_SAVEENV */ + +#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT +void env_relocate_spec(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(char, env1_buf, CONFIG_ENV_SIZE); + ALLOC_CACHE_ALIGN_BUFFER(char, env2_buf, CONFIG_ENV_SIZE); + int crc1_ok = 0, crc2_ok = 0; + env_t *ep, *tmp_env1, *tmp_env2; + + tmp_env1 = (env_t *)env1_buf; + tmp_env2 = (env_t *)env2_buf; + + if (ubi_part(CONFIG_ENV_UBI_PART, NULL)) { + printf("\n** Cannot find mtd partition \"%s\"\n", + CONFIG_ENV_UBI_PART); + set_default_env(NULL); + return; + } + + if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, (void *)tmp_env1, + CONFIG_ENV_SIZE)) { + printf("\n** Unable to read env from %s:%s **\n", + CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME); + } + + if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME_REDUND, (void *)tmp_env2, + CONFIG_ENV_SIZE)) { + printf("\n** Unable to read redundant env from %s:%s **\n", + CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME_REDUND); + } + + crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc; + crc2_ok = crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc; + + if (!crc1_ok && !crc2_ok) { + set_default_env("!bad CRC"); + return; + } else if (crc1_ok && !crc2_ok) { + gd->env_valid = 1; + } else if (!crc1_ok && crc2_ok) { + gd->env_valid = 2; + } else { + /* both ok - check serial */ + if (tmp_env1->flags == 255 && tmp_env2->flags == 0) + gd->env_valid = 2; + else if (tmp_env2->flags == 255 && tmp_env1->flags == 0) + gd->env_valid = 1; + else if (tmp_env1->flags > tmp_env2->flags) + gd->env_valid = 1; + else if (tmp_env2->flags > tmp_env1->flags) + gd->env_valid = 2; + else /* flags are equal - almost impossible */ + gd->env_valid = 1; + } + + if (gd->env_valid == 1) + ep = tmp_env1; + else + ep = tmp_env2; + + env_flags = ep->flags; + env_import((char *)ep, 0); +} +#else /* ! CONFIG_SYS_REDUNDAND_ENVIRONMENT */ +void env_relocate_spec(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); + + if (ubi_part(CONFIG_ENV_UBI_PART, NULL)) { + printf("\n** Cannot find mtd partition \"%s\"\n", + CONFIG_ENV_UBI_PART); + set_default_env(NULL); + return; + } + + if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, (void *)&buf, + CONFIG_ENV_SIZE)) { + printf("\n** Unable to read env from %s:%s **\n", + CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME); + set_default_env(NULL); + return; + } + + env_import(buf, 1); +} +#endif /* CONFIG_SYS_REDUNDAND_ENVIRONMENT */ diff --git a/common/lcd.c b/common/lcd.c index 77914adbce..edae835fb0 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -83,9 +83,35 @@ #define CONFIG_CONSOLE_SCROLL_LINES 1 #endif -DECLARE_GLOBAL_DATA_PTR; +/************************************************************************/ +/* ** CONSOLE DEFINITIONS & FUNCTIONS */ +/************************************************************************/ +#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO) +# define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \ + / VIDEO_FONT_HEIGHT) +#else +# define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT) +#endif -ulong lcd_setmem (ulong addr); +#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) +#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) +#define CONSOLE_ROW_FIRST lcd_console_address +#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) +#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ + - CONSOLE_ROW_SIZE) +#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) +#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) + +#if LCD_BPP == LCD_MONOCHROME +# define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ + (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) +#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) +# define COLOR_MASK(c) (c) +#else +# error Unsupported LCD BPP. +#endif + +DECLARE_GLOBAL_DATA_PTR; static void lcd_drawchars(ushort x, ushort y, uchar *str, int count); static inline void lcd_puts_xy(ushort x, ushort y, uchar *s); @@ -93,22 +119,25 @@ static inline void lcd_putc_xy(ushort x, ushort y, uchar c); static int lcd_init(void *lcdbase); -static void *lcd_logo (void); +static void *lcd_logo(void); static int lcd_getbgcolor(void); static void lcd_setfgcolor(int color); static void lcd_setbgcolor(int color); +static int lcd_color_fg; +static int lcd_color_bg; +int lcd_line_length; + char lcd_is_enabled = 0; -static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */ +static short console_col; +static short console_row; +static void *lcd_console_address; +static void *lcd_base; /* Start of framebuffer memory */ -#ifdef NOT_USED_SO_FAR -static void lcd_getcolreg(ushort regno, - ushort *red, ushort *green, ushort *blue); -static int lcd_getfgcolor(void); -#endif /* NOT_USED_SO_FAR */ +static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */ /************************************************************************/ @@ -148,7 +177,7 @@ static void console_scrollup(void) /* Clear the last rows */ memset(lcd_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE * rows, COLOR_MASK(lcd_color_bg), - CONSOLE_ROW_SIZE * rows); + CONSOLE_ROW_SIZE * rows); lcd_sync(); console_row -= rows; @@ -160,9 +189,8 @@ static inline void console_back(void) { if (--console_col < 0) { console_col = CONSOLE_COLS-1 ; - if (--console_row < 0) { + if (--console_row < 0) console_row = 0; - } } lcd_putc_xy(console_col * VIDEO_FONT_WIDTH, @@ -173,16 +201,13 @@ static inline void console_back(void) static inline void console_newline(void) { - ++console_row; console_col = 0; /* Check if we need to scroll the terminal */ - if (console_row >= CONSOLE_ROWS) { - /* Scroll everything up */ + if (++console_row >= CONSOLE_ROWS) console_scrollup(); - } else { + else lcd_sync(); - } } /*----------------------------------------------------------------------*/ @@ -234,9 +259,9 @@ void lcd_puts(const char *s) return; } - while (*s) { + while (*s) lcd_putc(*s++); - } + lcd_sync(); } @@ -283,7 +308,7 @@ static void lcd_drawchars(ushort x, ushort y, uchar *str, int count) #endif #if LCD_BPP == LCD_MONOCHROME - uchar rest = *d & -(1 << (8-off)); + uchar rest = *d & -(1 << (8 - off)); uchar sym; #endif for (i = 0; i < count; ++i) { @@ -313,7 +338,7 @@ static void lcd_drawchars(ushort x, ushort y, uchar *str, int count) #endif } #if LCD_BPP == LCD_MONOCHROME - *d = rest | (*d & ((1 << (8-off)) - 1)); + *d = rest | (*d & ((1 << (8 - off)) - 1)); #endif } } @@ -340,7 +365,7 @@ static inline void lcd_putc_xy(ushort x, ushort y, uchar c) #define N_BLK_VERT 2 #define N_BLK_HOR 3 -static int test_colors[N_BLK_HOR*N_BLK_VERT] = { +static int test_colors[N_BLK_HOR * N_BLK_VERT] = { CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW, CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN, }; @@ -361,7 +386,7 @@ static void test_pattern(void) for (v = 0; v < v_max; ++v) { uchar iy = v / v_step; for (h = 0; h < h_max; ++h) { - uchar ix = N_BLK_HOR * iy + (h/h_step); + uchar ix = N_BLK_HOR * iy + h / h_step; *pix++ = test_colors[ix]; } } @@ -379,12 +404,12 @@ int lcd_get_size(int *line_length) return *line_length * panel_info.vl_row; } -int drv_lcd_init (void) +int drv_lcd_init(void) { struct stdio_dev lcddev; int rc; - lcd_base = (void *)(gd->fb_base); + lcd_base = (void *) gd->fb_base; lcd_init(lcd_base); /* LCD initialization */ @@ -397,7 +422,7 @@ int drv_lcd_init (void) lcddev.putc = lcd_putc; /* 'putc' function */ lcddev.puts = lcd_puts; /* 'puts' function */ - rc = stdio_register (&lcddev); + rc = stdio_register(&lcddev); return (rc == 0) ? 1 : rc; } @@ -436,11 +461,11 @@ void lcd_clear(void) /* set framebuffer to background color */ memset((char *)lcd_base, COLOR_MASK(lcd_getbgcolor()), - lcd_line_length*panel_info.vl_row); + lcd_line_length * panel_info.vl_row); #endif /* Paint the logo and retrieve LCD base address */ debug("[LCD] Drawing the logo...\n"); - lcd_console_address = lcd_logo (); + lcd_console_address = lcd_logo(); console_col = 0; console_row = 0; @@ -468,11 +493,23 @@ static int lcd_init(void *lcdbase) debug("[LCD] Initializing LCD frambuffer at %p\n", lcdbase); lcd_ctrl_init(lcdbase); + + /* + * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi_b) ignores + * the 'lcdbase' argument and uses custom lcd base address + * by setting up gd->fb_base. Check for this condition and fixup + * 'lcd_base' address. + */ + if ((unsigned long)lcdbase != gd->fb_base) + lcd_base = (void *)gd->fb_base; + + debug("[LCD] Using LCD frambuffer at %p\n", lcd_base); + lcd_get_size(&lcd_line_length); lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; lcd_is_enabled = 1; lcd_clear(); - lcd_enable (); + lcd_enable(); /* Initialize the console */ console_col = 0; @@ -513,7 +550,8 @@ ulong lcd_setmem(ulong addr) /* Allocate pages for the frame buffer. */ addr -= size; - debug("Reserving %ldk for LCD Framebuffer at: %08lx\n", size>>10, addr); + debug("Reserving %ldk for LCD Framebuffer at: %08lx\n", + size >> 10, addr); return addr; } @@ -534,12 +572,10 @@ static void lcd_setbgcolor(int color) /*----------------------------------------------------------------------*/ -#ifdef NOT_USED_SO_FAR -static int lcd_getfgcolor(void) +int lcd_getfgcolor(void) { return lcd_color_fg; } -#endif /* NOT_USED_SO_FAR */ /*----------------------------------------------------------------------*/ @@ -548,8 +584,6 @@ static int lcd_getbgcolor(void) return lcd_color_bg; } -/*----------------------------------------------------------------------*/ - /************************************************************************/ /* ** Chipset depending Bitmap / Logo stuff... */ /************************************************************************/ @@ -566,13 +600,11 @@ static inline ushort *configuration_get_cmap(void) return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0)); #elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) return panel_info.cmap; -#else -#if defined(CONFIG_LCD_LOGO) +#elif defined(CONFIG_LCD_LOGO) return bmp_logo_palette; #else return NULL; #endif -#endif } #ifdef CONFIG_LCD_LOGO @@ -591,15 +623,16 @@ void bitmap_plot(int x, int y) immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; cpm8xx_t *cp = &(immr->im_cpm); #endif + unsigned bpix = NBITS(panel_info.vl_bpix); debug("Logo: width %d height %d colors %d cmap %d\n", BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, ARRAY_SIZE(bmp_logo_palette)); bmap = &bmp_logo_bitmap[0]; - fb = (uchar *)(lcd_base + y * lcd_line_length + x); + fb = (uchar *)(lcd_base + y * lcd_line_length + x * bpix / 8); - if (NBITS(panel_info.vl_bpix) < 12) { + if (bpix < 12) { /* Leave room for default color map * default case: generic system with no cmap (most likely 16bpp) * cmap was set to the source palette, so no change is done. @@ -645,12 +678,12 @@ void bitmap_plot(int x, int y) for (i = 0; i < BMP_LOGO_HEIGHT; ++i) { memcpy(fb, bmap, BMP_LOGO_WIDTH); bmap += BMP_LOGO_WIDTH; - fb += panel_info.vl_col; + fb += panel_info.vl_col; } } else { /* true color mode */ u16 col16; - fb16 = (ushort *)(lcd_base + y * lcd_line_length + x); + fb16 = (ushort *)fb; for (i = 0; i < BMP_LOGO_HEIGHT; ++i) { for (j = 0; j < BMP_LOGO_WIDTH; j++) { col16 = bmp_logo_palette[(bmap[j]-16)]; @@ -736,12 +769,11 @@ static void draw_encoded_bitmap(ushort **fbp, ushort c, int cnt) *fb++ = c; cnt--; } - (*fbp) = fb; + *fbp = fb; } /* - * Do not call this function directly, must be called from - * lcd_display_bitmap. + * Do not call this function directly, must be called from lcd_display_bitmap. */ static void lcd_display_rle8_bitmap(bmp_image_t *bmp, ushort *cmap, uchar *fb, int x_off, int y_off) @@ -868,8 +900,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) unsigned long pwidth = panel_info.vl_col; unsigned colors, bpix, bmp_bpix; - if (!bmp || !((bmp->header.signature[0] == 'B') && - (bmp->header.signature[1] == 'M'))) { + if (!bmp || !(bmp->header.signature[0] == 'B' && + bmp->header.signature[1] == 'M')) { printf("Error: no valid bmp image at %lx\n", bmp_image); return 1; @@ -882,7 +914,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) bpix = NBITS(panel_info.vl_bpix); - if ((bpix != 1) && (bpix != 8) && (bpix != 16) && (bpix != 32)) { + if (bpix != 1 && bpix != 8 && bpix != 16 && bpix != 32) { printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n", bpix, bmp_bpix); @@ -950,7 +982,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } #endif - padded_width = (width&0x3) ? ((width&~0x3)+4) : (width); + padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width); #ifdef CONFIG_SPLASH_SCREEN_ALIGN splash_align_axis(&x, pwidth, width); @@ -962,7 +994,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) if ((y + height) > panel_info.vl_row) height = panel_info.vl_row - y; - bmap = (uchar *)bmp + le32_to_cpu(bmp->header.data_offset); + bmap = (uchar *) bmp + le32_to_cpu(bmp->header.data_offset); fb = (uchar *) (lcd_base + (y + height - 1) * lcd_line_length + x * bpix / 8); @@ -997,7 +1029,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } } bmap += (padded_width - width); - fb -= (byte_width + lcd_line_length); + fb -= byte_width + lcd_line_length; } break; @@ -1009,7 +1041,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) fb_put_word(&fb, &bmap); bmap += (padded_width - width) * 2; - fb -= (width * 2 + lcd_line_length); + fb -= width * 2 + lcd_line_length; } break; #endif /* CONFIG_BMP_16BPP */ @@ -1023,7 +1055,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) *(fb++) = *(bmap++); *(fb++) = *(bmap++); } - fb -= (lcd_line_length + width * (bpix / 8)); + fb -= lcd_line_length + width * (bpix / 8); } break; #endif /* CONFIG_BMP_32BPP */ @@ -1098,7 +1130,7 @@ static void *lcd_logo(void) return (void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length); #else return (void *)lcd_base; -#endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */ +#endif /* CONFIG_LCD_LOGO && !defined(CONFIG_LCD_INFO_BELOW_LOGO) */ } #ifdef CONFIG_SPLASHIMAGE_GUARD @@ -1150,6 +1182,3 @@ int lcd_get_screen_columns(void) { return CONSOLE_COLS; } - -/************************************************************************/ -/************************************************************************/ diff --git a/common/menu.c b/common/menu.c index 6b2a2db3e0..64b461abb4 100644 --- a/common/menu.c +++ b/common/menu.c @@ -47,6 +47,8 @@ struct menu { char *title; int prompt; void (*item_data_print)(void *); + char *(*item_choice)(void *); + void *item_choice_data; struct list_head items; }; @@ -174,7 +176,7 @@ static inline struct menu_item *menu_item_by_key(struct menu *m, * Set *choice to point to the default item's data, if any default item was * set, and returns 1. If no default item was set, returns -ENOENT. */ -static inline int menu_default_choice(struct menu *m, void **choice) +int menu_default_choice(struct menu *m, void **choice) { if (m->default_item) { *choice = m->default_item->data; @@ -204,18 +206,26 @@ static inline int menu_interactive_choice(struct menu *m, void **choice) menu_display(m); - readret = readline_into_buffer("Enter choice: ", cbuf, - m->timeout / 10); + if (!m->item_choice) { + readret = readline_into_buffer("Enter choice: ", cbuf, + m->timeout / 10); - if (readret >= 0) { - choice_item = menu_item_by_key(m, cbuf); - - if (!choice_item) { - printf("%s not found\n", cbuf); - m->timeout = 0; + if (readret >= 0) { + choice_item = menu_item_by_key(m, cbuf); + if (!choice_item) + printf("%s not found\n", cbuf); + } else { + return menu_default_choice(m, choice); } - } else - return menu_default_choice(m, choice); + } else { + char *key = m->item_choice(m->item_choice_data); + + if (key) + choice_item = menu_item_by_key(m, key); + } + + if (!choice_item) + m->timeout = 0; } *choice = choice_item->data; @@ -348,11 +358,19 @@ int menu_item_add(struct menu *m, char *item_key, void *item_data) * what must be entered to select an item, the item_data_print function should * make it obvious what the key for each entry is. * + * item_choice - If not NULL, will be called when asking the user to choose an + * item. Returns a key string corresponding to the choosen item or NULL if + * no item has been selected. + * + * item_choice_data - Will be passed as the argument to the item_choice function + * * Returns a pointer to the menu if successful, or NULL if there is * insufficient memory available to create the menu. */ struct menu *menu_create(char *title, int timeout, int prompt, - void (*item_data_print)(void *)) + void (*item_data_print)(void *), + char *(*item_choice)(void *), + void *item_choice_data) { struct menu *m; @@ -365,6 +383,8 @@ struct menu *menu_create(char *title, int timeout, int prompt, m->prompt = prompt; m->timeout = timeout; m->item_data_print = item_data_print; + m->item_choice = item_choice; + m->item_choice_data = item_choice_data; if (title) { m->title = strdup(title); diff --git a/disk/part_efi.c b/disk/part_efi.c index b3fd0e954d..e9987f055c 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -30,6 +30,7 @@ * * This limits the maximum size of addressable storage to < 2 Terra Bytes */ +#include <asm/unaligned.h> #include <common.h> #include <command.h> #include <ide.h> @@ -505,7 +506,7 @@ err: static int pmbr_part_valid(struct partition *part) { if (part->sys_ind == EFI_PMBR_OSTYPE_EFI_GPT && - le32_to_cpu(part->start_sect) == 1UL) { + get_unaligned_le32(&part->start_sect) == 1UL) { return 1; } diff --git a/doc/README.bootmenu b/doc/README.bootmenu new file mode 100644 index 0000000000..9e85b40993 --- /dev/null +++ b/doc/README.bootmenu @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2011-2012 Pali Rohár <pali.rohar@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +ANSI terminal bootmenu command + +The "bootmenu" command uses U-Boot menu interfaces and provides +a simple mechanism for creating menus with different boot items. +The cursor keys "Up" and "Down" are used for navigation through +the items. Current active menu item is highlighted and can be +selected using the "Enter" key. The selection of the highlighted +menu entry invokes an U-Boot command (or a list of commands) +associated with this menu entry. + +The "bootmenu" command interprets ANSI escape sequencies, so +an ANSI terminal is required for proper menu rendering and item +selection. + +The assembling of the menu is done via a set of environment variables +"bootmenu_<num>" and "bootmenu_delay", i.e.: + + bootmenu_delay=<delay> + bootmenu_<num>="<title>=<commands>" + + <delay> is the autoboot delay in seconds, after which the first + menu entry will be selected automatically + + <num> is the boot menu entry number, starting from zero + + <title> is the text of the menu entry shown on the console + or on the boot screen + + <commands> are commands which will be executed when a menu + entry is selected + + (title and commands are separated by first appearance of '=' + character in the environment variable) + +First (optional) argument of the "bootmenu" command is a delay specifier +and it overrides the delay value defined by "bootmenu_delay" environment +variable. If the environment variable "bootmenu_delay" is not set or if +the argument of the "bootmenu" command is not specified, the default delay +will be CONFIG_BOOTDELAY. If delay is 0, no menu entries will be shown on +the console (or on the screen) and the command of the first menu entry will +be called immediately. If delay is less then 0, bootmenu will be shown and +autoboot will be disabled. + +Bootmenu always adds menu entry "U-Boot console" at the end of all menu +entries specified by environment variables. When selecting this entry +the bootmenu terminates and the usual U-Boot command prompt is presented +to the user. + +Example environment: + + setenv bootmenu_0 Boot 1. kernel=bootm 0x82000000 # Set first menu entry + setenv bootmenu_1 Boot 2. kernel=bootm 0x83000000 # Set second menu entry + setenv bootmenu_2 Reset board=reset # Set third menu entry + setenv bootmenu_3 U-Boot boot order=boot # Set fourth menu entry + bootmenu 20 # Run bootmenu with autoboot delay 20s + + +The above example will be rendered as below +(without decorating rectangle): + +┌──────────────────────────────────────────┐ +│ │ +│ *** U-Boot Boot Menu *** │ +│ │ +│ Boot 1. kernel │ +│ Boot 2. kernel │ +│ Reset board │ +│ U-Boot boot order │ +│ U-Boot console │ +│ │ +│ Hit any key to stop autoboot: 20 │ +│ Press UP/DOWN to move, ENTER to select │ +│ │ +└──────────────────────────────────────────┘ + +Selected menu entry will be highlighted - it will have inverted +background and text colors. + +To enable the "bootmenu" command add following definitions to the +board config file: + + #define CONFIG_CMD_BOOTMENU + #define CONFIG_MENU + +To run the bootmenu at startup add these additional definitions: + + #define CONFIG_AUTOBOOT_KEYED + #define CONFIG_BOOTDELAY 30 + #define CONFIG_MENU_SHOW + +When you intend to use the bootmenu on color frame buffer console, +make sure to additionally define CONFIG_CFB_CONSOLE_ANSI in the +board config file. diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 85bda03504..8352835ee9 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -156,6 +156,14 @@ To use this, put something like this in your board header file: #define CONFIG_EXTRA_ENV_SETTINGS "fdtcontroladdr=10000\0" +Build: + +After board configuration is done, fdt supported u-boot can be build in two ways: +1) build the default dts which is defined from CONFIG_DEFAULT_DEVICE_TREE + $ make +2) build the user specified dts file + $ make DEVICE_TREE=<dts-file-name> + Limitations ----------- diff --git a/doc/README.menu b/doc/README.menu index 6ce6bbab80..a8999cab51 100644 --- a/doc/README.menu +++ b/doc/README.menu @@ -51,7 +51,9 @@ struct menu; * menu_create() - Creates a menu handle with default settings */ struct menu *menu_create(char *title, int timeout, int prompt, - void (*item_data_print)(void *)); + void (*item_data_print)(void *), + char *(*item_choice)(void *), + void *item_choice_data); /* * menu_item_add() - Adds or replaces a menu item @@ -64,6 +66,11 @@ int menu_item_add(struct menu *m, char *item_key, void *item_data); int menu_default_set(struct menu *m, char *item_key); /* + * menu_default_choice() - Set *choice to point to the default item's data + */ +int menu_default_choice(struct menu *m, void **choice); + +/* * menu_get_choice() - Returns the user's selected menu entry, or the * default if the menu is set to not prompt or the timeout expires. */ diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index dbb5e8cce5..3b2ed6e109 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -52,10 +52,6 @@ /* Length of the BIOS image */ #define MAX_BIOSLEN (128 * 1024L) -/* Define some useful types and macros */ -#define true 1 -#define false 0 - /* Place to save PCI BAR's that we change and later restore */ static u32 saveROMBaseAddress; static u32 saveBaseAddress10; @@ -242,7 +238,7 @@ pcidev - PCI device info for the video card on the bus to boot VGAInfo - BIOS emulator VGA info structure RETURNS: -True if successfully initialised, false if not. +true if successfully initialised, false if not. REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS @@ -295,7 +291,7 @@ static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) PARAMETERS: pcidev - PCI device info for the video card on the bus to boot pVGAInfo - Place to return VGA info structure is requested -cleanUp - True to clean up on exit, false to leave emulator active +cleanUp - true to clean up on exit, false to leave emulator active REMARKS: Boots the PCI/AGP video card on the bus using the Video ROM BIOS image diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index 84724b7125..ad88a53f0c 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -47,6 +47,8 @@ * ****************************************************************************/ +#define __io +#include <asm/io.h> #include <common.h> #include "biosemui.h" diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index 7cf48792eb..bcc192fb2e 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -41,6 +41,8 @@ * ****************************************************************************/ +#define __io +#include <asm/io.h> #include <common.h> #include "biosemui.h" diff --git a/drivers/bios_emulator/include/biosemu.h b/drivers/bios_emulator/include/biosemu.h index 13cb3170c1..e92e96e82b 100644 --- a/drivers/bios_emulator/include/biosemu.h +++ b/drivers/bios_emulator/include/biosemu.h @@ -127,9 +127,9 @@ biosmem_limit - Limit of the BIOS image busmem_base - Base of the VGA bus memory timer - Timer used to emulate PC timer ports timer0 - Latched value for timer 0 -timer0Latched - True if timer 0 value was just latched +timer0Latched - true if timer 0 value was just latched timer2 - Current value for timer 2 -emulateVGA - True to emulate VGA I/O and memory accesses +emulateVGA - true to emulate VGA I/O and memory accesses ****************************************************************************/ typedef struct { diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c index 6417d09998..2fa8050f6a 100644 --- a/drivers/bios_emulator/x86emu/debug.c +++ b/drivers/bios_emulator/x86emu/debug.c @@ -309,7 +309,7 @@ void x86emu_single_step(void) case 'P': noDecode = (noDecode) ? 0 : 1; printk("Toggled decoding to %s\n", - (noDecode) ? "FALSE" : "TRUE"); + (noDecode) ? "false" : "true"); break; case 't': case 0: diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 8c785ae923..cab7f8c7ad 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -865,14 +865,14 @@ int scsi_exec(ccb *pccb) break; default: printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]); - return FALSE; + return false; } if (ret) { debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret); - return FALSE; + return false; } - return TRUE; + return true; } diff --git a/drivers/block/sata_dwc.c b/drivers/block/sata_dwc.c index 28d87f538b..49288a7ba3 100644 --- a/drivers/block/sata_dwc.c +++ b/drivers/block/sata_dwc.c @@ -360,7 +360,7 @@ int init_sata(int dev) if (status == 0x7f) { printf("Hard Disk not found.\n"); dev_state = SATA_NODEVICE; - rc = FALSE; + rc = false; return rc; } @@ -381,7 +381,7 @@ int init_sata(int dev) printf("** TimeOUT **\n"); dev_state = SATA_NODEVICE; - rc = FALSE; + rc = false; return rc; } if ((i >= 100) && ((i % 100) == 0)) @@ -458,7 +458,7 @@ static int sata_dwc_softreset(struct ata_port *ap) } else { printf("No device found\n"); dev_state = SATA_NODEVICE; - return FALSE; + return false; } tmp = ATA_DEVICE_OBS; @@ -737,7 +737,7 @@ static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, status = ata_busy_wait(ap, ATA_BUSY, 30000); if (status & ATA_BUSY) { printf("BSY = 0 check. timeout.\n"); - rc = FALSE; + rc = false; return rc; } @@ -987,7 +987,7 @@ unsigned ata_exec_internal(struct ata_device *dev, status = ata_busy_wait(ap, ATA_BUSY, 300000); if (status & ATA_BUSY) { printf("BSY = 0 check. timeout.\n"); - rc = FALSE; + rc = false; return rc; } @@ -997,7 +997,7 @@ unsigned ata_exec_internal(struct ata_device *dev, tag = ATA_TAG_INTERNAL; if (test_and_set_bit(tag, &ap->qc_allocated)) { - rc = FALSE; + rc = false; return rc; } @@ -1656,14 +1656,14 @@ static int check_sata_dev_state(void) ret = ata_dev_read_sectors(pdata, datalen, 0, 1); - if (ret == TRUE) + if (ret == true) break; i++; if (i > (ATA_RESET_TIME * 100)) { printf("** TimeOUT **\n"); dev_state = SATA_NODEVICE; - return FALSE; + return false; } if ((i >= 100) && ((i % 100) == 0)) @@ -1672,7 +1672,7 @@ static int check_sata_dev_state(void) dev_state = SATA_READY; - return TRUE; + return true; } static unsigned int ata_dev_set_feature(struct ata_device *dev, @@ -1772,7 +1772,7 @@ ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) blks = 0; } - if (ata_dev_read_sectors(pdata, datalen, block, n_block) != TRUE) { + if (ata_dev_read_sectors(pdata, datalen, block, n_block) != true) { printf("sata_dwc : Hard disk read error.\n"); blkcnt -= blks; break; @@ -1795,7 +1795,7 @@ static int ata_dev_read_sectors(unsigned char *pdata, unsigned long datalen, int may_fallback = 1; if (dev_state == SATA_ERROR) - return FALSE; + return false; ata_dev_select(ap, dev->devno, 1, 1); @@ -1893,11 +1893,11 @@ retry: goto err_out; } - return TRUE; + return true; err_out: printf("failed to READ SECTORS (%s, err_mask=0x%x)\n", reason, err_mask); - return FALSE; + return false; } #if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48) @@ -1946,7 +1946,7 @@ ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer) blks = 0; } - if (ata_dev_write_sectors(pdata, datalen, block, n_block) != TRUE) { + if (ata_dev_write_sectors(pdata, datalen, block, n_block) != true) { printf("sata_dwc : Hard disk read error.\n"); blkcnt -= blks; break; @@ -1969,7 +1969,7 @@ static int ata_dev_write_sectors(unsigned char* pdata, unsigned long datalen, int may_fallback = 1; if (dev_state == SATA_ERROR) - return FALSE; + return false; ata_dev_select(ap, dev->devno, 1, 1); @@ -2068,9 +2068,9 @@ retry: goto err_out; } - return TRUE; + return true; err_out: printf("failed to WRITE SECTORS (%s, err_mask=0x%x)\n", reason, err_mask); - return FALSE; + return false; } diff --git a/drivers/block/sata_dwc.h b/drivers/block/sata_dwc.h index 204d644c05..e4e4ab1122 100644 --- a/drivers/block/sata_dwc.h +++ b/drivers/block/sata_dwc.h @@ -467,11 +467,4 @@ struct ata_port { unsigned char *pdata; }; -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #endif diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index 564aa9838b..656683a105 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -764,9 +764,9 @@ int scsi_exec(ccb *pccb) retry: scsi_issue(pccb); if(pccb->contr_stat!=SIR_COMPLETE) - return FALSE; + return false; if(pccb->status==S_GOOD) - return TRUE; + return true; if(pccb->status==S_CHECK_COND) { /* check condition */ for(i=0;i<16;i++) tmpcmd[i]=pccb->cmd[i]; @@ -797,12 +797,12 @@ retry: case SENSE_NO_SENSE: case SENSE_RECOVERED_ERROR: /* seems to be ok */ - return TRUE; + return true; break; case SENSE_NOT_READY: if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { /* if device is not in process of becoming ready */ - return FALSE; + return false; break; } /* else fall through */ case SENSE_UNIT_ATTENTION: @@ -814,13 +814,13 @@ retry: goto retry; } PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt); - return FALSE; + return false; default: - return FALSE; + return false; } } PRINTF("Status = %X\n",pccb->status); - return FALSE; + return false; } diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index 7b717bce28..153095d71e 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -27,6 +27,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o +COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index e8477fb7c7..6af6890d09 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -44,90 +44,232 @@ static int dfu_find_alt_num(const char *s) static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE) dfu_buf[DFU_DATA_BUF_SIZE]; +static int dfu_write_buffer_drain(struct dfu_entity *dfu) +{ + long w_size; + int ret; + + /* flush size? */ + w_size = dfu->i_buf - dfu->i_buf_start; + if (w_size == 0) + return 0; + + /* update CRC32 */ + dfu->crc = crc32(dfu->crc, dfu->i_buf_start, w_size); + + ret = dfu->write_medium(dfu, dfu->offset, dfu->i_buf_start, &w_size); + if (ret) + debug("%s: Write error!\n", __func__); + + /* point back */ + dfu->i_buf = dfu->i_buf_start; + + /* update offset */ + dfu->offset += w_size; + + puts("#"); + + return ret; +} + int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) { - static unsigned char *i_buf; - static int i_blk_seq_num; - long w_size = 0; int ret = 0; + int tret; + + debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x offset: 0x%llx bufoffset: 0x%x\n", + __func__, dfu->name, buf, size, blk_seq_num, dfu->offset, + dfu->i_buf - dfu->i_buf_start); + + if (!dfu->inited) { + /* initial state */ + dfu->crc = 0; + dfu->offset = 0; + dfu->bad_skip = 0; + dfu->i_blk_seq_num = 0; + dfu->i_buf_start = dfu_buf; + dfu->i_buf_end = dfu_buf + sizeof(dfu_buf); + dfu->i_buf = dfu->i_buf_start; + + dfu->inited = 1; + } - debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n", - __func__, dfu->name, buf, size, blk_seq_num, i_buf); + if (dfu->i_blk_seq_num != blk_seq_num) { + printf("%s: Wrong sequence number! [%d] [%d]\n", + __func__, dfu->i_blk_seq_num, blk_seq_num); + return -1; + } - if (blk_seq_num == 0) { - i_buf = dfu_buf; - i_blk_seq_num = 0; + /* DFU 1.1 standard says: + * The wBlockNum field is a block sequence number. It increments each + * time a block is transferred, wrapping to zero from 65,535. It is used + * to provide useful context to the DFU loader in the device." + * + * This means that it's a 16 bit counter that roll-overs at + * 0xffff -> 0x0000. By having a typical 4K transfer block + * we roll-over at exactly 256MB. Not very fun to debug. + * + * Handling rollover, and having an inited variable, + * makes things work. + */ + + /* handle rollover */ + dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff; + + /* flush buffer if overflow */ + if ((dfu->i_buf + size) > dfu->i_buf_end) { + tret = dfu_write_buffer_drain(dfu); + if (ret == 0) + ret = tret; } - if (i_blk_seq_num++ != blk_seq_num) { - printf("%s: Wrong sequence number! [%d] [%d]\n", - __func__, i_blk_seq_num, blk_seq_num); + /* we should be in buffer now (if not then size too large) */ + if ((dfu->i_buf + size) > dfu->i_buf_end) { + printf("%s: Wrong size! [%d] [%d] - %d\n", + __func__, dfu->i_blk_seq_num, blk_seq_num, size); return -1; } - memcpy(i_buf, buf, size); - i_buf += size; + memcpy(dfu->i_buf, buf, size); + dfu->i_buf += size; + /* if end or if buffer full flush */ + if (size == 0 || (dfu->i_buf + size) > dfu->i_buf_end) { + tret = dfu_write_buffer_drain(dfu); + if (ret == 0) + ret = tret; + } + + /* end? */ if (size == 0) { - /* Integrity check (if needed) */ - debug("%s: %s %d [B] CRC32: 0x%x\n", __func__, dfu->name, - i_buf - dfu_buf, crc32(0, dfu_buf, i_buf - dfu_buf)); + /* Now try and flush to the medium if needed. */ + if (dfu->flush_medium) + ret = dfu->flush_medium(dfu); + printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc); - w_size = i_buf - dfu_buf; - ret = dfu->write_medium(dfu, dfu_buf, &w_size); - if (ret) - debug("%s: Write error!\n", __func__); + /* clear everything */ + dfu->crc = 0; + dfu->offset = 0; + dfu->i_blk_seq_num = 0; + dfu->i_buf_start = dfu_buf; + dfu->i_buf_end = dfu_buf + sizeof(dfu_buf); + dfu->i_buf = dfu->i_buf_start; + + dfu->inited = 0; - i_blk_seq_num = 0; - i_buf = NULL; - return ret; } - return ret; + return ret = 0 ? size : ret; +} + +static int dfu_read_buffer_fill(struct dfu_entity *dfu, void *buf, int size) +{ + long chunk; + int ret, readn; + + readn = 0; + while (size > 0) { + /* get chunk that can be read */ + chunk = min(size, dfu->b_left); + /* consume */ + if (chunk > 0) { + memcpy(buf, dfu->i_buf, chunk); + dfu->crc = crc32(dfu->crc, buf, chunk); + dfu->i_buf += chunk; + dfu->b_left -= chunk; + size -= chunk; + buf += chunk; + readn += chunk; + } + + /* all done */ + if (size > 0) { + /* no more to read */ + if (dfu->r_left == 0) + break; + + dfu->i_buf = dfu->i_buf_start; + dfu->b_left = dfu->i_buf_end - dfu->i_buf_start; + + /* got to read, but buffer is empty */ + if (dfu->b_left > dfu->r_left) + dfu->b_left = dfu->r_left; + ret = dfu->read_medium(dfu, dfu->offset, dfu->i_buf, + &dfu->b_left); + if (ret != 0) { + debug("%s: Read error!\n", __func__); + return ret; + } + dfu->offset += dfu->b_left; + dfu->r_left -= dfu->b_left; + + puts("#"); + } + } + + return readn; } int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) { - static unsigned char *i_buf; - static int i_blk_seq_num; - static long r_size; - static u32 crc; int ret = 0; debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n", - __func__, dfu->name, buf, size, blk_seq_num, i_buf); + __func__, dfu->name, buf, size, blk_seq_num, dfu->i_buf); + + if (!dfu->inited) { + ret = dfu->read_medium(dfu, 0, buf, &dfu->r_left); + if (ret != 0) { + debug("%s: failed to get r_left\n", __func__); + return ret; + } + + debug("%s: %s %ld [B]\n", __func__, dfu->name, dfu->r_left); + + dfu->i_blk_seq_num = 0; + dfu->crc = 0; + dfu->offset = 0; + dfu->i_buf_start = dfu_buf; + dfu->i_buf_end = dfu_buf + sizeof(dfu_buf); + dfu->i_buf = dfu->i_buf_start; + dfu->b_left = 0; - if (blk_seq_num == 0) { - i_buf = dfu_buf; - ret = dfu->read_medium(dfu, i_buf, &r_size); - debug("%s: %s %ld [B]\n", __func__, dfu->name, r_size); - i_blk_seq_num = 0; - /* Integrity check (if needed) */ - crc = crc32(0, dfu_buf, r_size); + dfu->bad_skip = 0; + + dfu->inited = 1; } - if (i_blk_seq_num++ != blk_seq_num) { + if (dfu->i_blk_seq_num != blk_seq_num) { printf("%s: Wrong sequence number! [%d] [%d]\n", - __func__, i_blk_seq_num, blk_seq_num); + __func__, dfu->i_blk_seq_num, blk_seq_num); return -1; } + /* handle rollover */ + dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff; - if (r_size >= size) { - memcpy(buf, i_buf, size); - i_buf += size; - r_size -= size; - return size; - } else { - memcpy(buf, i_buf, r_size); - i_buf += r_size; - debug("%s: %s CRC32: 0x%x\n", __func__, dfu->name, crc); - puts("UPLOAD ... done\nCtrl+C to exit ...\n"); + ret = dfu_read_buffer_fill(dfu, buf, size); + if (ret < 0) { + printf("%s: Failed to fill buffer\n", __func__); + return -1; + } + + if (ret < size) { + debug("%s: %s CRC32: 0x%x\n", __func__, dfu->name, dfu->crc); + puts("\nUPLOAD ... done\nCtrl+C to exit ...\n"); - i_buf = NULL; - i_blk_seq_num = 0; - crc = 0; - return r_size; + dfu->i_blk_seq_num = 0; + dfu->crc = 0; + dfu->offset = 0; + dfu->i_buf_start = dfu_buf; + dfu->i_buf_end = dfu_buf + sizeof(dfu_buf); + dfu->i_buf = dfu->i_buf_start; + dfu->b_left = 0; + + dfu->bad_skip = 0; + + dfu->inited = 0; } + return ret; } @@ -147,6 +289,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, if (strcmp(interface, "mmc") == 0) { if (dfu_fill_entity_mmc(dfu, s)) return -1; + } else if (strcmp(interface, "nand") == 0) { + if (dfu_fill_entity_nand(dfu, s)) + return -1; } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface); diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 083d74591b..e2f3978400 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -22,6 +22,7 @@ #include <common.h> #include <malloc.h> #include <errno.h> +#include <div64.h> #include <dfu.h> enum dfu_mmc_op { @@ -29,32 +30,51 @@ enum dfu_mmc_op { DFU_OP_WRITE, }; +static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE) + dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE]; +static long dfu_file_buf_len; + static int mmc_block_op(enum dfu_mmc_op op, struct dfu_entity *dfu, - void *buf, long *len) + u64 offset, void *buf, long *len) { char cmd_buf[DFU_CMD_BUF_SIZE]; + u32 blk_start, blk_count; + + /* + * We must ensure that we work in lba_blk_size chunks, so ALIGN + * this value. + */ + *len = ALIGN(*len, dfu->data.mmc.lba_blk_size); + + blk_start = dfu->data.mmc.lba_start + + (u32)lldiv(offset, dfu->data.mmc.lba_blk_size); + blk_count = *len / dfu->data.mmc.lba_blk_size; + if (blk_start + blk_count > + dfu->data.mmc.lba_start + dfu->data.mmc.lba_size) { + puts("Request would exceed designated area!\n"); + return -EINVAL; + } - sprintf(cmd_buf, "mmc %s 0x%x %x %x", + sprintf(cmd_buf, "mmc %s %p %x %x", op == DFU_OP_READ ? "read" : "write", - (unsigned int) buf, - dfu->data.mmc.lba_start, - dfu->data.mmc.lba_size); - - if (op == DFU_OP_READ) - *len = dfu->data.mmc.lba_blk_size * dfu->data.mmc.lba_size; + buf, blk_start, blk_count); debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf); return run_command(cmd_buf, 0); } -static inline int mmc_block_write(struct dfu_entity *dfu, void *buf, long *len) +static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len) { - return mmc_block_op(DFU_OP_WRITE, dfu, buf, len); -} + if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE) { + dfu_file_buf_len = 0; + return -EINVAL; + } -static inline int mmc_block_read(struct dfu_entity *dfu, void *buf, long *len) -{ - return mmc_block_op(DFU_OP_READ, dfu, buf, len); + /* Add to the current buffer. */ + memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len); + dfu_file_buf_len += *len; + + return 0; } static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu, @@ -66,20 +86,23 @@ static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu, switch (dfu->layout) { case DFU_FS_FAT: - sprintf(cmd_buf, "fat%s mmc %d:%d 0x%x %s %lx", + sprintf(cmd_buf, "fat%s mmc %d:%d 0x%x %s", op == DFU_OP_READ ? "load" : "write", dfu->data.mmc.dev, dfu->data.mmc.part, - (unsigned int) buf, dfu->name, *len); + (unsigned int) buf, dfu->name); + if (op == DFU_OP_WRITE) + sprintf(cmd_buf + strlen(cmd_buf), " %lx", *len); break; case DFU_FS_EXT4: - sprintf(cmd_buf, "ext4%s mmc %d:%d /%s 0x%x %ld", + sprintf(cmd_buf, "ext4%s mmc %d:%d 0x%x /%s", op == DFU_OP_READ ? "load" : "write", dfu->data.mmc.dev, dfu->data.mmc.part, - dfu->name, (unsigned int) buf, *len); + (unsigned int) buf, dfu->name); break; default: printf("%s: Layout (%s) not (yet) supported!\n", __func__, dfu_get_layout(dfu->layout)); + return -1; } debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf); @@ -102,27 +125,18 @@ static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu, return ret; } -static inline int mmc_file_write(struct dfu_entity *dfu, void *buf, long *len) -{ - return mmc_file_op(DFU_OP_WRITE, dfu, buf, len); -} - -static inline int mmc_file_read(struct dfu_entity *dfu, void *buf, long *len) -{ - return mmc_file_op(DFU_OP_READ, dfu, buf, len); -} - -int dfu_write_medium_mmc(struct dfu_entity *dfu, void *buf, long *len) +int dfu_write_medium_mmc(struct dfu_entity *dfu, + u64 offset, void *buf, long *len) { int ret = -1; switch (dfu->layout) { case DFU_RAW_ADDR: - ret = mmc_block_write(dfu, buf, len); + ret = mmc_block_op(DFU_OP_WRITE, dfu, offset, buf, len); break; case DFU_FS_FAT: case DFU_FS_EXT4: - ret = mmc_file_write(dfu, buf, len); + ret = mmc_file_buffer(dfu, buf, len); break; default: printf("%s: Layout (%s) not (yet) supported!\n", __func__, @@ -132,17 +146,34 @@ int dfu_write_medium_mmc(struct dfu_entity *dfu, void *buf, long *len) return ret; } -int dfu_read_medium_mmc(struct dfu_entity *dfu, void *buf, long *len) +int dfu_flush_medium_mmc(struct dfu_entity *dfu) +{ + int ret = 0; + + if (dfu->layout != DFU_RAW_ADDR) { + /* Do stuff here. */ + ret = mmc_file_op(DFU_OP_WRITE, dfu, &dfu_file_buf, + &dfu_file_buf_len); + + /* Now that we're done */ + dfu_file_buf_len = 0; + } + + return ret; +} + +int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, + long *len) { int ret = -1; switch (dfu->layout) { case DFU_RAW_ADDR: - ret = mmc_block_read(dfu, buf, len); + ret = mmc_block_op(DFU_OP_READ, dfu, offset, buf, len); break; case DFU_FS_FAT: case DFU_FS_EXT4: - ret = mmc_file_read(dfu, buf, len); + ret = mmc_file_op(DFU_OP_READ, dfu, buf, len); break; default: printf("%s: Layout (%s) not (yet) supported!\n", __func__, @@ -181,14 +212,15 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) mmc = find_mmc_device(dev); if (mmc == NULL || mmc_init(mmc)) { - printf("%s: could not find mmc device #%d!\n", __func__, dev); + printf("%s: could not find mmc device #%d!\n", + __func__, dev); return -ENODEV; } blk_dev = &mmc->block_dev; if (get_partition_info(blk_dev, part, &partinfo) != 0) { printf("%s: could not find partition #%d on mmc device #%d!\n", - __func__, part, dev); + __func__, part, dev); return -ENODEV; } @@ -208,6 +240,10 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) dfu->read_medium = dfu_read_medium_mmc; dfu->write_medium = dfu_write_medium_mmc; + dfu->flush_medium = dfu_flush_medium_mmc; + + /* initial state */ + dfu->inited = 0; return 0; } diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c new file mode 100644 index 0000000000..7dc89b2f2b --- /dev/null +++ b/drivers/dfu/dfu_nand.c @@ -0,0 +1,187 @@ +/* + * dfu_nand.c -- DFU for NAND routines. + * + * Copyright (C) 2012-2013 Texas Instruments, Inc. + * + * Based on dfu_mmc.c which is: + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <div64.h> +#include <dfu.h> +#include <linux/mtd/mtd.h> +#include <jffs2/load_kernel.h> +#include <nand.h> + +enum dfu_nand_op { + DFU_OP_READ = 1, + DFU_OP_WRITE, +}; + +static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + loff_t start, lim; + size_t count, actual; + int ret; + nand_info_t *nand; + + /* if buf == NULL return total size of the area */ + if (buf == NULL) { + *len = dfu->data.nand.size; + return 0; + } + + start = dfu->data.nand.start + offset + dfu->bad_skip; + lim = dfu->data.nand.start + dfu->data.nand.size - start; + count = *len; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("%s: invalid nand device\n", __func__); + return -1; + } + + nand = &nand_info[nand_curr_device]; + + if (op == DFU_OP_READ) + ret = nand_read_skip_bad(nand, start, &count, &actual, + lim, buf); + else + ret = nand_write_skip_bad(nand, start, &count, &actual, + lim, buf, 0); + + if (ret != 0) { + printf("%s: nand_%s_skip_bad call failed at %llx!\n", + __func__, op == DFU_OP_READ ? "read" : "write", + start); + return ret; + } + + /* + * Find out where we stopped writing data. This can be deeper into + * the NAND than we expected due to having to skip bad blocks. So + * we must take this into account for the next write, if any. + */ + if (actual > count) + dfu->bad_skip += actual - count; + + return ret; +} + +static inline int nand_block_write(struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len); +} + +static inline int nand_block_read(struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + return nand_block_op(DFU_OP_READ, dfu, offset, buf, len); +} + +static int dfu_write_medium_nand(struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + int ret = -1; + + switch (dfu->layout) { + case DFU_RAW_ADDR: + ret = nand_block_write(dfu, offset, buf, len); + break; + default: + printf("%s: Layout (%s) not (yet) supported!\n", __func__, + dfu_get_layout(dfu->layout)); + } + + return ret; +} + +static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf, + long *len) +{ + int ret = -1; + + switch (dfu->layout) { + case DFU_RAW_ADDR: + ret = nand_block_read(dfu, offset, buf, len); + break; + default: + printf("%s: Layout (%s) not (yet) supported!\n", __func__, + dfu_get_layout(dfu->layout)); + } + + return ret; +} + +int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +{ + char *st; + int ret, dev, part; + + dfu->dev_type = DFU_DEV_NAND; + st = strsep(&s, " "); + if (!strcmp(st, "raw")) { + dfu->layout = DFU_RAW_ADDR; + dfu->data.nand.start = simple_strtoul(s, &s, 16); + s++; + dfu->data.nand.size = simple_strtoul(s, &s, 16); + } else if (!strcmp(st, "part")) { + char mtd_id[32]; + struct mtd_device *mtd_dev; + u8 part_num; + struct part_info *pi; + + dfu->layout = DFU_RAW_ADDR; + + dev = simple_strtoul(s, &s, 10); + s++; + part = simple_strtoul(s, &s, 10); + + sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1); + printf("using id '%s'\n", mtd_id); + + mtdparts_init(); + + ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi); + if (ret != 0) { + printf("Could not locate '%s'\n", mtd_id); + return -1; + } + + dfu->data.nand.start = pi->offset; + dfu->data.nand.size = pi->size; + + } else { + printf("%s: Memory layout (%s) not supported!\n", __func__, st); + return -1; + } + + dfu->read_medium = dfu_read_medium_nand; + dfu->write_medium = dfu_write_medium_nand; + + /* initial state */ + dfu->inited = 0; + + return 0; +} diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c index 4703fc1718..0ae78f92b3 100644 --- a/drivers/fpga/ACEX1K.c +++ b/drivers/fpga/ACEX1K.c @@ -140,7 +140,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ + (*fn->config) (true, true, cookie); /* Assert nCONFIG */ udelay(2); /* T_cfg > 2us */ @@ -152,7 +152,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) return FPGA_FAIL; } - (*fn->config) (FALSE, TRUE, cookie); /* Deassert nCONFIG */ + (*fn->config) (false, true, cookie); /* Deassert nCONFIG */ udelay(2); /* T_cf2st1 < 4us */ /* Wait for nSTATUS to be released (i.e. deasserted) */ @@ -192,13 +192,13 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) i = 8; do { /* Deassert the clock */ - (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (false, true, cookie); CONFIG_FPGA_DELAY (); /* Write data */ - (*fn->data) ( (val & 0x01), TRUE, cookie); + (*fn->data) ((val & 0x01), true, cookie); CONFIG_FPGA_DELAY (); /* Assert the clock */ - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (true, true, cookie); CONFIG_FPGA_DELAY (); val >>= 1; i --; @@ -232,9 +232,9 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) for (i = 0; i < 12; i++) { CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ } ret_val = FPGA_SUCCESS; diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c index f087d01825..8388da5081 100644 --- a/drivers/fpga/altera.c +++ b/drivers/fpga/altera.c @@ -215,7 +215,7 @@ int altera_info( Altera_desc *desc ) static int altera_validate (Altera_desc * desc, const char *fn) { - int ret_val = FALSE; + int ret_val = false; if (desc) { if ((desc->family > min_altera_type) && @@ -223,7 +223,7 @@ static int altera_validate (Altera_desc * desc, const char *fn) if ((desc->iface > min_altera_iface_type) && (desc->iface < max_altera_iface_type)) { if (desc->size) { - ret_val = TRUE; + ret_val = true; } else { printf ("%s: NULL part size\n", fn); } diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index 0773e731eb..6b734c2b3b 100644 --- a/drivers/fpga/cyclon2.c +++ b/drivers/fpga/cyclon2.c @@ -144,9 +144,9 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->config) (FALSE, TRUE, cookie); /* De-assert nCONFIG */ + (*fn->config) (false, true, cookie); /* De-assert nCONFIG */ udelay(100); - (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ + (*fn->config) (true, true, cookie); /* Assert nCONFIG */ udelay(2); /* T_cfg > 2us */ @@ -164,7 +164,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) /* Get ready for the burn */ CONFIG_FPGA_DELAY (); - ret = (*fn->write) (buf, bsize, TRUE, cookie); + ret = (*fn->write) (buf, bsize, true, cookie); if (ret) { puts ("** Write failed.\n"); (*fn->abort) (cookie); diff --git a/drivers/fpga/lattice.c b/drivers/fpga/lattice.c index d8b642a6bc..8c3465a7fa 100644 --- a/drivers/fpga/lattice.c +++ b/drivers/fpga/lattice.c @@ -275,7 +275,7 @@ signed char ispVM(void) static int lattice_validate(Lattice_desc *desc, const char *fn) { - int ret_val = FALSE; + int ret_val = false; if (desc) { if ((desc->family > min_lattice_type) && @@ -283,7 +283,7 @@ static int lattice_validate(Lattice_desc *desc, const char *fn) if ((desc->iface > min_lattice_iface_type) && (desc->iface < max_lattice_iface_type)) { if (desc->size) { - ret_val = TRUE; + ret_val = true; } else { printf("%s: NULL part size\n", fn); } diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c index 4bc7070048..0bc400d70b 100644 --- a/drivers/fpga/spartan2.c +++ b/drivers/fpga/spartan2.c @@ -162,11 +162,11 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ + (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Get ready for the burn */ CONFIG_FPGA_DELAY (); - (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ + (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT and BUSY to go high */ @@ -179,20 +179,20 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } } while ((*fn->init) (cookie) && (*fn->busy) (cookie)); - (*fn->wr) (TRUE, TRUE, cookie); /* Assert write, commit */ - (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->wr) (true, true, cookie); /* Assert write, commit */ + (*fn->cs) (true, true, cookie); /* Assert chip select, commit */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ /* Load the data */ while (bytecount < bsize) { /* XXX - do we check for an Ctrl-C press in here ??? */ /* XXX - Check the error bit? */ - (*fn->wdata) (data[bytecount++], TRUE, cookie); /* write the data */ + (*fn->wdata) (data[bytecount++], true, cookie); /* write the data */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_CHECK_BUSY ts = get_timer (0); /* get current time */ @@ -201,9 +201,9 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) * make sure we aren't busy forever... */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for BUSY to clear.\n"); @@ -220,8 +220,8 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } CONFIG_FPGA_DELAY (); - (*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */ - (*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */ + (*fn->cs) (false, true, cookie); /* Deassert the chip select */ + (*fn->wr) (false, true, cookie); /* Deassert the write pin */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -233,9 +233,9 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) while ((*fn->done) (cookie) == FPGA_FAIL) { CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); @@ -277,15 +277,15 @@ static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) printf ("Starting Dump of FPGA Device %d...\n", cookie); - (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->cs) (true, true, cookie); /* Assert chip select, commit */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ /* dump the data */ while (bytecount < bsize) { /* XXX - do we check for an Ctrl-C press in here ??? */ - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ (*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK if (bytecount % (bsize / 40) == 0) @@ -293,9 +293,9 @@ static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) #endif } - (*fn->cs) (FALSE, FALSE, cookie); /* Deassert the chip select */ - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->cs) (false, false, cookie); /* Deassert the chip select */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -351,7 +351,7 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ + (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Wait for INIT state (init low) */ ts = get_timer (0); /* get current time */ @@ -365,7 +365,7 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* Get ready for the burn */ CONFIG_FPGA_DELAY (); - (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ + (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT to go high */ @@ -390,13 +390,13 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) i = 8; do { /* Deassert the clock */ - (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (false, true, cookie); CONFIG_FPGA_DELAY (); /* Write data */ - (*fn->wr) ((val & 0x80), TRUE, cookie); + (*fn->wr) ((val & 0x80), true, cookie); CONFIG_FPGA_DELAY (); /* Assert the clock */ - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (true, true, cookie); CONFIG_FPGA_DELAY (); val <<= 1; i --; @@ -417,14 +417,14 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* now check for done signal */ ts = get_timer (0); /* get current time */ ret_val = FPGA_SUCCESS; - (*fn->wr) (TRUE, TRUE, cookie); + (*fn->wr) (true, true, cookie); while (! (*fn->done) (cookie)) { CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ putc ('*'); diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 1633a7069d..c63c605292 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -166,11 +166,11 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ + (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Get ready for the burn */ CONFIG_FPGA_DELAY (); - (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ + (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT and BUSY to go high */ @@ -183,20 +183,20 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } } while ((*fn->init) (cookie) && (*fn->busy) (cookie)); - (*fn->wr) (TRUE, TRUE, cookie); /* Assert write, commit */ - (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->wr) (true, true, cookie); /* Assert write, commit */ + (*fn->cs) (true, true, cookie); /* Assert chip select, commit */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ /* Load the data */ while (bytecount < bsize) { /* XXX - do we check for an Ctrl-C press in here ??? */ /* XXX - Check the error bit? */ - (*fn->wdata) (data[bytecount++], TRUE, cookie); /* write the data */ + (*fn->wdata) (data[bytecount++], true, cookie); /* write the data */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_CHECK_BUSY ts = get_timer (0); /* get current time */ @@ -205,9 +205,9 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) * make sure we aren't busy forever... */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for BUSY to clear.\n"); @@ -224,8 +224,8 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) } CONFIG_FPGA_DELAY (); - (*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */ - (*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */ + (*fn->cs) (false, true, cookie); /* Deassert the chip select */ + (*fn->wr) (false, true, cookie); /* Deassert the write pin */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -239,9 +239,9 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) * make sure we aren't busy forever... */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); @@ -283,15 +283,15 @@ static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) printf ("Starting Dump of FPGA Device %d...\n", cookie); - (*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->cs) (true, true, cookie); /* Assert chip select, commit */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ /* dump the data */ while (bytecount < bsize) { /* XXX - do we check for an Ctrl-C press in here ??? */ - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ (*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK if (bytecount % (bsize / 40) == 0) @@ -299,9 +299,9 @@ static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) #endif } - (*fn->cs) (FALSE, FALSE, cookie); /* Deassert the chip select */ - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->cs) (false, false, cookie); /* Deassert the chip select */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); /* terminate the dotted line */ @@ -357,7 +357,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ - (*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */ + (*fn->pgm) (true, true, cookie); /* Assert the program, commit */ /* Wait for INIT state (init low) */ ts = get_timer (0); /* get current time */ @@ -373,7 +373,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* Get ready for the burn */ CONFIG_FPGA_DELAY (); - (*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */ + (*fn->pgm) (false, true, cookie); /* Deassert the program, commit */ ts = get_timer (0); /* get current time */ /* Now wait for INIT to go high */ @@ -389,7 +389,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* Load the data */ if(*fn->bwr) - (*fn->bwr) (data, bsize, TRUE, cookie); + (*fn->bwr) (data, bsize, true, cookie); else { while (bytecount < bsize) { @@ -405,13 +405,13 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) i = 8; do { /* Deassert the clock */ - (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (false, true, cookie); CONFIG_FPGA_DELAY (); /* Write data */ - (*fn->wr) ((val & 0x80), TRUE, cookie); + (*fn->wr) ((val & 0x80), true, cookie); CONFIG_FPGA_DELAY (); /* Assert the clock */ - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (true, true, cookie); CONFIG_FPGA_DELAY (); val <<= 1; i --; @@ -433,16 +433,16 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* now check for done signal */ ts = get_timer (0); /* get current time */ ret_val = FPGA_SUCCESS; - (*fn->wr) (TRUE, TRUE, cookie); + (*fn->wr) (true, true, cookie); while (! (*fn->done) (cookie)) { /* XXX - we should have a check in here somewhere to * make sure we aren't busy forever... */ CONFIG_FPGA_DELAY (); - (*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */ + (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */ + (*fn->clk) (true, true, cookie); /* Assert the clock pin */ putc ('*'); diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index b26d231511..3974e47d93 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -221,7 +221,7 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) * There is no maximum value for the pulse width. Check to make * sure that INIT_B goes low after assertion of PROG_B */ - (*fn->pgm) (TRUE, TRUE, cookie); + (*fn->pgm) (true, true, cookie); udelay (10); ts = get_timer (0); do { @@ -234,9 +234,9 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) } } while (!(*fn->init) (cookie)); - (*fn->pgm) (FALSE, TRUE, cookie); + (*fn->pgm) (false, true, cookie); CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (true, true, cookie); /* * Start a timer and wait for INIT_B to go high @@ -253,8 +253,8 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) } } while ((*fn->init) (cookie) && (*fn->busy) (cookie)); - (*fn->wr) (TRUE, TRUE, cookie); - (*fn->cs) (TRUE, TRUE, cookie); + (*fn->wr) (true, true, cookie); + (*fn->cs) (true, true, cookie); udelay (10000); @@ -286,15 +286,15 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) } #endif - (*fn->wdata) (data[bytecount++], TRUE, cookie); + (*fn->wdata) (data[bytecount++], true, cookie); CONFIG_FPGA_DELAY (); /* * Cycle the clock pin */ - (*fn->clk) (FALSE, TRUE, cookie); + (*fn->clk) (false, true, cookie); CONFIG_FPGA_DELAY (); - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (true, true, cookie); #ifdef CONFIG_SYS_FPGA_CHECK_BUSY ts = get_timer (0); @@ -319,8 +319,8 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) * Finished writing the data; deassert FPGA CS_B and WRITE_B signals. */ CONFIG_FPGA_DELAY (); - (*fn->cs) (FALSE, TRUE, cookie); - (*fn->wr) (FALSE, TRUE, cookie); + (*fn->cs) (false, true, cookie); + (*fn->wr) (false, true, cookie); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); @@ -381,8 +381,8 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) printf ("Starting Dump of FPGA Device %d...\n", cookie); - (*fn->cs) (TRUE, TRUE, cookie); - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->cs) (true, true, cookie); + (*fn->clk) (true, true, cookie); while (bytecount < bsize) { #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC @@ -394,8 +394,8 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) /* * Cycle the clock and read the data */ - (*fn->clk) (FALSE, TRUE, cookie); - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->clk) (false, true, cookie); + (*fn->clk) (true, true, cookie); (*fn->rdata) (&(data[bytecount++]), cookie); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK if (bytecount % (bsize / 40) == 0) @@ -406,9 +406,9 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) /* * Deassert CS_B and cycle the clock to deselect the device. */ - (*fn->cs) (FALSE, FALSE, cookie); - (*fn->clk) (FALSE, TRUE, cookie); - (*fn->clk) (TRUE, TRUE, cookie); + (*fn->cs) (false, false, cookie); + (*fn->clk) (false, true, cookie); + (*fn->clk) (true, true, cookie); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK putc ('\n'); diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index 4072cb414a..32787b2366 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -242,7 +242,7 @@ int xilinx_info (Xilinx_desc * desc) static int xilinx_validate (Xilinx_desc * desc, char *fn) { - int ret_val = FALSE; + int ret_val = false; if (desc) { if ((desc->family > min_xilinx_type) && @@ -250,7 +250,7 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn) if ((desc->iface > min_xilinx_iface_type) && (desc->iface < max_xilinx_iface_type)) { if (desc->size) { - ret_val = TRUE; + ret_val = true; } else printf ("%s: NULL part size\n", fn); } else diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 60dbb7864f..cf10b0d4ca 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -210,9 +210,11 @@ unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect) static inline void * flash_map (flash_info_t * info, flash_sect_t sect, uint offset) { - unsigned int byte_offset = offset * info->portwidth; + unsigned int byte_offset = offset * info->portwidth / info->chipwidth; + unsigned int addr = (info->start[sect] + byte_offset); + unsigned int mask = 0xffffffff << (info->portwidth - 1); - return (void *)(info->start[sect] + byte_offset); + return (void *)(uintptr_t)(addr & mask); } static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, @@ -398,6 +400,8 @@ void flash_write_cmd (flash_info_t * info, flash_sect_t sect, #endif flash_write64(cword.ll, addr); break; + default: + printf("fwc: Unknown port width %d\n", info->portwidth); } /* Ensure all the instructions are fully finished */ @@ -585,7 +589,6 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector, prompt, info->start[sector], flash_read_long (info, sector, 0)); flash_write_cmd (info, sector, 0, info->cmd_reset); - udelay(1); return ERR_TIMOUT; } udelay (1); /* also triggers watchdog */ @@ -753,12 +756,8 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) static flash_sect_t find_sector (flash_info_t * info, ulong addr) { static flash_sect_t saved_sector; /* previously found sector */ - static flash_info_t *saved_info; /* previously used flash bank */ flash_sect_t sector = saved_sector; - if ((info != saved_info) || (sector >= info->sector_count)) - sector = 0; - while ((info->start[sector] < addr) && (sector < info->sector_count - 1)) sector++; @@ -770,7 +769,6 @@ static flash_sect_t find_sector (flash_info_t * info, ulong addr) sector--; saved_sector = sector; - saved_info = info; return sector; } @@ -787,12 +785,15 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest, /* Check if Flash is (sufficiently) erased */ switch (info->portwidth) { case FLASH_CFI_8BIT: + debug("%s: 8-bit 0x%02x\n", __func__, cword.c); flag = ((flash_read8(dstaddr) & cword.c) == cword.c); break; case FLASH_CFI_16BIT: + debug("%s: 16-bit 0x%04x\n", __func__, cword.w); flag = ((flash_read16(dstaddr) & cword.w) == cword.w); break; case FLASH_CFI_32BIT: + debug("%s: 32-bit 0x%08lx\n", __func__, cword.l); flag = ((flash_read32(dstaddr) & cword.l) == cword.l); break; case FLASH_CFI_64BIT: @@ -1053,6 +1054,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_sect_t sect; int st; + debug("%s: erasing sectors %d to %d\n", __func__, s_first, s_last); + if (info->flash_id != FLASH_MAN_CFI) { puts ("Can't erase unknown flash type - aborted\n"); return 1; @@ -1162,6 +1165,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) rcode = 1; else if (flash_verbose) putc ('.'); + } else { + debug("\nSector %d is protected.\n", + info->protect[sect]); } } @@ -1857,7 +1863,7 @@ static void flash_read_cfi (flash_info_t *info, void *buf, unsigned int i; for (i = 0; i < len; i++) - p[i] = flash_read_uchar(info, start + i); + p[i] = flash_read_uchar(info, start + (i * 2)); } static void __flash_cmd_reset(flash_info_t *info) @@ -1878,21 +1884,40 @@ static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) { int cfi_offset; - /* Issue FLASH reset command */ - flash_cmd_reset(info); - for (cfi_offset=0; cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint); cfi_offset++) { + /* Issue FLASH reset command */ + flash_cmd_reset(info); flash_write_cmd (info, 0, flash_offset_cfi[cfi_offset], FLASH_CMD_CFI); - if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') - && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') - && flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) { + if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q') && + flash_isequal(info, 0, + FLASH_OFFSET_CFI_RESP + 2, 'R') && + flash_isequal(info, 0, + FLASH_OFFSET_CFI_RESP + 4, 'Y')) { flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, sizeof(struct cfi_qry)); +#ifdef CONFIG_SYS_FLASH_INTERFACE_WIDTH + info->interface = CONFIG_SYS_FLASH_INTERFACE_WIDTH; +#else info->interface = le16_to_cpu(qry->interface_desc); - + /* Some flash chips can support multiple bus widths. + * In this case, override the interface width and + * limit it to the port width. + */ + if ((info->interface == FLASH_CFI_X8X16) && + (info->portwidth == FLASH_CFI_8BIT)) { + debug("Overriding 16-bit interface" + " width to 8-bit port width.\n"); + info->interface = FLASH_CFI_X8; + } else if ((info->interface == FLASH_CFI_X16X32) && + (info->portwidth == FLASH_CFI_16BIT)) { + debug("Overriding 16-bit interface" + " width to 16-bit port width.\n"); + info->interface = FLASH_CFI_X16; + } +#endif info->cfi_offset = flash_offset_cfi[cfi_offset]; debug ("device interface is %d\n", info->interface); @@ -1903,8 +1928,8 @@ static int __flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) info->chipwidth << CFI_FLASH_SHIFT_WIDTH); /* calculate command offsets as in the Linux driver */ - info->addr_unlock1 = 0x555; - info->addr_unlock2 = 0x2aa; + info->addr_unlock1 = 0xaaa; + info->addr_unlock2 = 0x555; /* * modify the unlock address if we are @@ -1938,8 +1963,12 @@ static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry) for (info->chipwidth = FLASH_CFI_BY8; info->chipwidth <= info->portwidth; info->chipwidth <<= 1) - if (__flash_detect_cfi(info, qry)) + if (__flash_detect_cfi(info, qry)) { + debug("Found CFI flash, portwidth %d," + " chipwidth %d\n", + info->portwidth, info->chipwidth); return 1; + } } debug ("not found\n"); return 0; @@ -1958,7 +1987,7 @@ static void flash_fixup_amd(flash_info_t *info, struct cfi_qry *qry) /* CFI < 1.1, try to guess from device id */ if ((info->device_id & 0x80) != 0) cfi_reverse_geometry(qry); - } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) { + } else if (flash_read_uchar(info, info->ext_addr + 0x1e) == 3) { /* CFI >= 1.1, deduct from top/bottom flag */ /* note: ext_addr is valid since cfi_version > 0 */ cfi_reverse_geometry(qry); @@ -2024,6 +2053,26 @@ static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry) } } +static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry) +{ + /* + * The M29EW devices seem to report the CFI information wrong + * when it's in 8 bit mode. + * There's an app note from Numonyx on this issue. + * So adjust the buffer size for M29EW while operating in 8-bit mode + */ + if (((qry->max_buf_write_size) > 0x8) && + (info->device_id == 0x7E) && + (info->device_id2 == 0x2201 || + info->device_id2 == 0x2301 || + info->device_id2 == 0x2801 || + info->device_id2 == 0x4801)) { + debug("Adjusted buffer size on Numonyx flash" + " M29EW family in 8 bit mode\n"); + qry->max_buf_write_size = 0x8; + } +} + /* * The following code cannot be run from FLASH! * @@ -2054,14 +2103,15 @@ ulong flash_get_size (phys_addr_t base, int banknum) if (flash_detect_cfi (info, &qry)) { info->vendor = le16_to_cpu(qry.p_id); - info->ext_addr = le16_to_cpu(qry.p_adr); + info->ext_addr = le16_to_cpu(qry.p_adr) * 2; + debug("extended address is 0x%x\n", info->ext_addr); num_erase_regions = qry.num_erase_regions; if (info->ext_addr) { info->cfi_version = (ushort) flash_read_uchar (info, - info->ext_addr + 3) << 8; + info->ext_addr + 6) << 8; info->cfi_version |= (ushort) flash_read_uchar (info, - info->ext_addr + 4); + info->ext_addr + 8); } #ifdef DEBUG @@ -2105,6 +2155,9 @@ ulong flash_get_size (phys_addr_t base, int banknum) case 0x00bf: /* SST */ flash_fixup_sst(info, &qry); break; + case 0x0089: /* Numonyx */ + flash_fixup_num(info, &qry); + break; } debug ("manufacturer is %d\n", info->vendor); @@ -2112,6 +2165,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("device id is 0x%x\n", info->device_id); debug ("device id2 is 0x%x\n", info->device_id2); debug ("cfi version is 0x%04x\n", info->cfi_version); + debug("port width: %d, chipwidth: %d, interface: %d\n", + info->portwidth, info->chipwidth, info->interface); size_ratio = info->portwidth / info->chipwidth; /* if the chip is x8/x16 reduce the ratio by half */ diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 96dcda2b2b..cbfc6796c7 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -347,16 +347,18 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, if (mtd_mod_by_eb(cur_offset, master) != 0) { /* Round up to next erasesize */ slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize; - printk(KERN_NOTICE "Moving partition %d: " - "0x%012llx -> 0x%012llx\n", partno, - (unsigned long long)cur_offset, (unsigned long long)slave->offset); + debug("Moving partition %d: 0x%012llx -> 0x%012llx\n", + partno, (unsigned long long)cur_offset, + (unsigned long long)slave->offset); } } if (slave->mtd.size == MTDPART_SIZ_FULL) slave->mtd.size = master->size - slave->offset; - printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset, - (unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name); + debug("0x%012llx-0x%012llx : \"%s\"\n", + (unsigned long long)slave->offset, + (unsigned long long)(slave->offset + slave->mtd.size), + slave->mtd.name); /* let's do some sanity checks */ if (slave->offset >= master->size) { @@ -463,7 +465,7 @@ int add_mtd_partitions(struct mtd_info *master, if (mtd_partitions.next == NULL) INIT_LIST_HEAD(&mtd_partitions); - printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); + debug("Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); for (i = 0; i < nbparts; i++) { slave = add_one_partition(master, parts + i, i, cur_offset); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 507bbc2544..eeba521942 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -30,8 +30,6 @@ #define DRIVER_NAME "mxc_nand" -typedef enum {false, true} bool; - struct mxc_nand_host { struct mtd_info mtd; struct nand_chip *nand; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index ff2d348307..4727f9c989 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -416,11 +416,13 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, * @param nand NAND device * @param offset offset in flash * @param length image length + * @param used length of flash needed for the requested length * @return 0 if the image fits and there are no bad blocks * 1 if the image fits, but there are bad blocks * -1 if the image does not fit */ -static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length) +static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length, + size_t *used) { size_t len_excl_bad = 0; int ret = 0; @@ -442,8 +444,13 @@ static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length) ret = 1; offset += block_len; + *used += block_len; } + /* If the length is not a multiple of block_len, adjust. */ + if (len_excl_bad > length) + *used -= (len_excl_bad - length); + return ret; } @@ -476,23 +483,36 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf, * Write image to NAND flash. * Blocks that are marked bad are skipped and the is written to the next * block instead as long as the image is short enough to fit even after - * skipping the bad blocks. + * skipping the bad blocks. Due to bad blocks we may not be able to + * perform the requested write. In the case where the write would + * extend beyond the end of the NAND device, both length and actual (if + * not NULL) are set to 0. In the case where the write would extend + * beyond the limit we are passed, length is set to 0 and actual is set + * to the required length. * * @param nand NAND device * @param offset offset in flash * @param length buffer length + * @param actual set to size required to write length worth of + * buffer or 0 on error, if not NULL + * @param lim maximum size that actual may be in order to not + * exceed the buffer * @param buffer buffer to read from * @param flags flags modifying the behaviour of the write to NAND * @return 0 in case of success */ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer, int flags) + size_t *actual, loff_t lim, u_char *buffer, int flags) { int rval = 0, blocksize; size_t left_to_write = *length; + size_t used_for_write = 0; u_char *p_buffer = buffer; int need_skip; + if (actual) + *actual = 0; + #ifdef CONFIG_CMD_NAND_YAFFS if (flags & WITH_YAFFS_OOB) { if (flags & ~WITH_YAFFS_OOB) @@ -529,13 +549,23 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, return -EINVAL; } - need_skip = check_skip_len(nand, offset, *length); + need_skip = check_skip_len(nand, offset, *length, &used_for_write); + + if (actual) + *actual = used_for_write; + if (need_skip < 0) { printf("Attempt to write outside the flash area\n"); *length = 0; return -EINVAL; } + if (used_for_write > lim) { + puts("Size of write exceeds partition or device limit\n"); + *length = 0; + return -EFBIG; + } + if (!need_skip && !(flags & WITH_DROP_FFS)) { rval = nand_write(nand, offset, length, buffer); if (rval == 0) @@ -626,36 +656,58 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, * * Read image from NAND flash. * Blocks that are marked bad are skipped and the next block is read - * instead as long as the image is short enough to fit even after skipping the - * bad blocks. + * instead as long as the image is short enough to fit even after + * skipping the bad blocks. Due to bad blocks we may not be able to + * perform the requested read. In the case where the read would extend + * beyond the end of the NAND device, both length and actual (if not + * NULL) are set to 0. In the case where the read would extend beyond + * the limit we are passed, length is set to 0 and actual is set to the + * required length. * * @param nand NAND device * @param offset offset in flash * @param length buffer length, on return holds number of read bytes + * @param actual set to size required to read length worth of buffer or 0 + * on error, if not NULL + * @param lim maximum size that actual may be in order to not exceed the + * buffer * @param buffer buffer to write to * @return 0 in case of success */ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer) + size_t *actual, loff_t lim, u_char *buffer) { int rval; size_t left_to_read = *length; + size_t used_for_read = 0; u_char *p_buffer = buffer; int need_skip; if ((offset & (nand->writesize - 1)) != 0) { printf("Attempt to read non page-aligned data\n"); *length = 0; + if (actual) + *actual = 0; return -EINVAL; } - need_skip = check_skip_len(nand, offset, *length); + need_skip = check_skip_len(nand, offset, *length, &used_for_read); + + if (actual) + *actual = used_for_read; + if (need_skip < 0) { printf("Attempt to read outside the flash area\n"); *length = 0; return -EINVAL; } + if (used_for_read > lim) { + puts("Size of read exceeds partition or device limit\n"); + *length = 0; + return -EFBIG; + } + if (!need_skip) { rval = nand_read(nand, offset, length, buffer); if (!rval || rval == -EUCLEAN) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index d144ac29bc..a708162e43 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -478,19 +478,19 @@ static int attach_by_scanning(struct ubi_device *ubi) err = ubi_eba_init_scan(ubi, si); if (err) - goto out_wl; + goto out_vtbl; err = ubi_wl_init_scan(ubi, si); if (err) - goto out_vtbl; + goto out_eba; ubi_scan_destroy_si(si); return 0; +out_eba: + ubi_eba_close(ubi); out_vtbl: vfree(ubi->vtbl); -out_wl: - ubi_wl_close(ubi); out_si: ubi_scan_destroy_si(si); return err; diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 14c3a5f76c..044e849907 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -59,7 +59,11 @@ #define UBI_NAME_STR "ubi" /* Normal UBI messages */ +#ifdef CONFIG_UBI_SILENCE_MSG +#define ubi_msg(fmt, ...) +#else #define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__) +#endif /* UBI warning messages */ #define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \ __func__, ##__VA_ARGS__) diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 88b867a0c1..d1ba722cb5 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1538,6 +1538,7 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) if (ubi->avail_pebs < WL_RESERVED_PEBS) { ubi_err("no enough physical eraseblocks (%d, need %d)", ubi->avail_pebs, WL_RESERVED_PEBS); + err = -ENOSPC; goto out_free; } ubi->avail_pebs -= WL_RESERVED_PEBS; diff --git a/drivers/net/armada100_fec.c b/drivers/net/armada100_fec.c index ed7cf20324..89ebf0b517 100644 --- a/drivers/net/armada100_fec.c +++ b/drivers/net/armada100_fec.c @@ -100,7 +100,7 @@ static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg, } /* wait for the SMI register to become available */ - if (armdfec_phy_timeout(®s->smi, SMI_BUSY, FALSE)) { + if (armdfec_phy_timeout(®s->smi, SMI_BUSY, false)) { printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__); return -1; } @@ -108,7 +108,7 @@ static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg, writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_R, ®s->smi); /* now wait for the data to be valid */ - if (armdfec_phy_timeout(®s->smi, SMI_R_VALID, TRUE)) { + if (armdfec_phy_timeout(®s->smi, SMI_R_VALID, true)) { val = readl(®s->smi); printf("ARMD100 FEC: (%s) PHY Read timeout, val=0x%x\n", __func__, val); @@ -143,7 +143,7 @@ static int smi_reg_write(const char *devname, } /* wait for the SMI register to become available */ - if (armdfec_phy_timeout(®s->smi, SMI_BUSY, FALSE)) { + if (armdfec_phy_timeout(®s->smi, SMI_BUSY, false)) { printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__); return -1; } diff --git a/drivers/net/armada100_fec.h b/drivers/net/armada100_fec.h index e2df4fcb87..dcac964948 100644 --- a/drivers/net/armada100_fec.h +++ b/drivers/net/armada100_fec.h @@ -29,13 +29,6 @@ #ifndef __ARMADA100_FEC_H__ #define __ARMADA100_FEC_H__ -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #define PORT_NUM 0x0 /* RX & TX descriptor command */ diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 8ba98b27d5..c1863f4bb1 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -313,14 +313,14 @@ void e1000_standby_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ****************************************************************************/ -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) +static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) { uint32_t eecd = 0; DEBUGFUNC(); if (hw->mac_type == e1000_ich8lan) - return FALSE; + return false; if (hw->mac_type == e1000_82573 || hw->mac_type == e1000_82574) { eecd = E1000_READ_REG(hw, EECD); @@ -330,9 +330,9 @@ static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) /* If both bits are set, device is Flash type */ if (eecd == 0x03) - return FALSE; + return false; } - return TRUE; + return true; } /****************************************************************************** @@ -421,8 +421,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->opcode_bits = 3; eeprom->address_bits = 6; eeprom->delay_usec = 50; - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82540: case e1000_82545: @@ -439,8 +439,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->word_size = 64; eeprom->address_bits = 6; } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82541: case e1000_82541_rev_2: @@ -469,8 +469,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->address_bits = 6; } } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82571: case e1000_82572: @@ -484,8 +484,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82573: case e1000_82574: @@ -499,9 +499,9 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = TRUE; - eeprom->use_eewr = TRUE; - if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + eeprom->use_eerd = true; + eeprom->use_eewr = true; + if (e1000_is_onboard_nvm_eeprom(hw) == false) { eeprom->type = e1000_eeprom_flash; eeprom->word_size = 2048; @@ -522,8 +522,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = TRUE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = true; + eeprom->use_eewr = false; break; /* ich8lan does not support currently. if needed, please @@ -535,8 +535,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) int32_t i = 0; eeprom->type = e1000_eeprom_ich8; - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; eeprom->word_size = E1000_SHADOW_RAM_WORDS; uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); @@ -544,7 +544,7 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) * so as to save time for driver init */ if (hw->eeprom_shadow_ram != NULL) { for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].modified = false; hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } } @@ -779,8 +779,8 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, * directly. In this case, we need to acquire the EEPROM so that * FW or other port software does not interrupt. */ - if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && - hw->eeprom.use_eerd == FALSE) { + if (e1000_is_onboard_nvm_eeprom(hw) == true && + hw->eeprom.use_eerd == false) { /* Prepare the EEPROM for bit-bang reading */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) @@ -788,7 +788,7 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, } /* Eerd register EEPROM access requires no eeprom aquire/release */ - if (eeprom->use_eerd == TRUE) + if (eeprom->use_eerd == true) return e1000_read_eeprom_eerd(hw, offset, words, data); /* ich8lan does not support currently. if needed, please @@ -935,7 +935,7 @@ e1000_set_phy_mode(struct e1000_hw *hw) if (ret_val) return ret_val; - hw->phy_reset_disable = FALSE; + hw->phy_reset_disable = false; } } @@ -1098,17 +1098,17 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) return E1000_SUCCESS; } -static boolean_t e1000_is_second_port(struct e1000_hw *hw) +static bool e1000_is_second_port(struct e1000_hw *hw) { switch (hw->mac_type) { case e1000_80003es2lan: case e1000_82546: case e1000_82571: if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) - return TRUE; + return true; /* Fallthrough */ default: - return FALSE; + return false; } } @@ -1373,7 +1373,7 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; /* Delay to allow any outstanding PCI transactions to complete before * resetting the device @@ -2098,7 +2098,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) - hw->phy_reset_disable = FALSE; + hw->phy_reset_disable = false; return E1000_SUCCESS; } @@ -2118,7 +2118,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) ****************************************************************************/ static int32_t -e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active) +e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { uint32_t phy_ctrl = 0; int32_t ret_val; @@ -2253,7 +2253,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active) ****************************************************************************/ static int32_t -e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active) +e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) { uint32_t phy_ctrl = 0; int32_t ret_val; @@ -2378,7 +2378,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ if (hw->phy_type == e1000_phy_igp) { /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); + ret_val = e1000_set_d3_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D3\n"); return ret_val; @@ -2386,7 +2386,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) } /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, FALSE); + ret_val = e1000_set_d0_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D0\n"); return ret_val; @@ -2495,9 +2495,9 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) /***************************************************************************** * This function checks the mode of the firmware. * - * returns - TRUE when the mode is IAMT or FALSE. + * returns - true when the mode is IAMT or false. ****************************************************************************/ -boolean_t +bool e1000_check_mng_mode(struct e1000_hw *hw) { uint32_t fwsm; @@ -2508,12 +2508,12 @@ e1000_check_mng_mode(struct e1000_hw *hw) if (hw->mac_type == e1000_ich8lan) { if ((fwsm & E1000_FWSM_MODE_MASK) == (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return TRUE; + return true; } else if ((fwsm & E1000_FWSM_MODE_MASK) == (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return TRUE; + return true; - return FALSE; + return false; } static int32_t @@ -2675,7 +2675,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * firmware will have already initialized them. We only initialize * them if the HW is not in IAMT mode. */ - if (e1000_check_mng_mode(hw) == FALSE) { + if (e1000_check_mng_mode(hw) == false) { /* Enable Electrical Idle on the PHY */ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE; ret_val = e1000_write_phy_reg(hw, @@ -2879,7 +2879,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) } } - hw->get_link_status = TRUE; + hw->get_link_status = true; return E1000_SUCCESS; } @@ -3598,7 +3598,7 @@ e1000_check_for_link(struct eth_device *nic) } if (phy_data & MII_SR_LINK_STATUS) { - hw->get_link_status = FALSE; + hw->get_link_status = false; } else { /* No link detected */ return -E1000_ERR_NOLINK; @@ -3661,7 +3661,7 @@ e1000_check_for_link(struct eth_device *nic) rctl = E1000_READ_REG(hw, RCTL); rctl &= ~E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; } } else { /* If TBI compatibility is was previously off, turn it on. For @@ -3670,7 +3670,7 @@ e1000_check_for_link(struct eth_device *nic) * will look like CRC errors to to the hardware. */ if (!hw->tbi_compatibility_on) { - hw->tbi_compatibility_on = TRUE; + hw->tbi_compatibility_on = true; rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); @@ -4569,7 +4569,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; uint16_t phy_id_high, phy_id_low; - boolean_t match = FALSE; + bool match = false; DEBUGFUNC(); @@ -4609,11 +4609,11 @@ e1000_detect_gig_phy(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82543: if (hw->phy_id == M88E1000_E_PHY_ID) - match = TRUE; + match = true; break; case e1000_82544: if (hw->phy_id == M88E1000_I_PHY_ID) - match = TRUE; + match = true; break; case e1000_82540: case e1000_82545: @@ -4621,37 +4621,37 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_82546: case e1000_82546_rev_3: if (hw->phy_id == M88E1011_I_PHY_ID) - match = TRUE; + match = true; break; case e1000_82541: case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: if(hw->phy_id == IGP01E1000_I_PHY_ID) - match = TRUE; + match = true; break; case e1000_82573: if (hw->phy_id == M88E1111_I_PHY_ID) - match = TRUE; + match = true; break; case e1000_82574: if (hw->phy_id == BME1000_E_PHY_ID) - match = TRUE; + match = true; break; case e1000_80003es2lan: if (hw->phy_id == GG82563_E_PHY_ID) - match = TRUE; + match = true; break; case e1000_ich8lan: if (hw->phy_id == IGP03E1000_E_PHY_ID) - match = TRUE; + match = true; if (hw->phy_id == IFE_E_PHY_ID) - match = TRUE; + match = true; if (hw->phy_id == IFE_PLUS_E_PHY_ID) - match = TRUE; + match = true; if (hw->phy_id == IFE_C_E_PHY_ID) - match = TRUE; + match = true; break; default: DEBUGOUT("Invalid MAC type %d\n", hw->mac_type); @@ -4682,7 +4682,7 @@ e1000_set_media_type(struct e1000_hw *hw) if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } switch (hw->device_id) { @@ -4714,7 +4714,7 @@ e1000_set_media_type(struct e1000_hw *hw) if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } else { hw->media_type = e1000_media_type_copper; } @@ -4788,8 +4788,8 @@ e1000_sw_init(struct eth_device *nic) hw->media_type = e1000_media_type_fiber; } - hw->tbi_compatibility_en = TRUE; - hw->wait_autoneg_complete = TRUE; + hw->tbi_compatibility_en = true; + hw->wait_autoneg_complete = true; if (hw->mac_type < e1000_82543) hw->report_tx_early = 0; else @@ -5194,7 +5194,7 @@ e1000_initialize(bd_t * bis) hw->original_fc = e1000_fc_default; hw->autoneg_failed = 0; hw->autoneg = 1; - hw->get_link_status = TRUE; + hw->get_link_status = true; hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); hw->mac_type = e1000_undefined; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 1bbae5085a..6b93c2bfef 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -89,11 +89,6 @@ int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw, int argc, char * const argv[]); #endif -typedef enum { - FALSE = 0, - TRUE = 1 -} boolean_t; - /* Enumerated types specific to the e1000 hardware */ /* Media Access Controlers */ typedef enum { @@ -340,7 +335,7 @@ struct e1000_phy_stats { Control and Address */ #define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ -#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False +#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive false Carrier Counter */ #define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */ @@ -1040,14 +1035,14 @@ struct e1000_hw_stats { }; struct e1000_eeprom_info { - e1000_eeprom_type type; - uint16_t word_size; - uint16_t opcode_bits; - uint16_t address_bits; - uint16_t delay_usec; - uint16_t page_size; - boolean_t use_eerd; - boolean_t use_eewr; +e1000_eeprom_type type; + uint16_t word_size; + uint16_t opcode_bits; + uint16_t address_bits; + uint16_t delay_usec; + uint16_t page_size; + bool use_eerd; + bool use_eewr; }; typedef enum { @@ -1150,20 +1145,20 @@ struct e1000_hw { #if 0 uint8_t perm_mac_addr[NODE_ADDRESS_SIZE]; #endif - boolean_t disable_polarity_correction; - boolean_t speed_downgraded; - boolean_t get_link_status; - boolean_t tbi_compatibility_en; - boolean_t tbi_compatibility_on; - boolean_t fc_strict_ieee; - boolean_t fc_send_xon; - boolean_t report_tx_early; - boolean_t phy_reset_disable; - boolean_t initialize_hw_bits_disable; + bool disable_polarity_correction; + bool speed_downgraded; + bool get_link_status; + bool tbi_compatibility_en; + bool tbi_compatibility_on; + bool fc_strict_ieee; + bool fc_send_xon; + bool report_tx_early; + bool phy_reset_disable; + bool initialize_hw_bits_disable; #if 0 - boolean_t adaptive_ifs; - boolean_t ifs_params_forced; - boolean_t in_ifs_mode; + bool adaptive_ifs; + bool ifs_params_forced; + bool in_ifs_mode; #endif e1000_smart_speed smart_speed; e1000_dsp_config dsp_config_state; @@ -1860,11 +1855,11 @@ struct e1000_hw { * Typical use: * ... * if (TBI_ACCEPT) { - * accept_frame = TRUE; + * accept_frame = true; * e1000_tbi_adjust_stats(adapter, MacAddress); * frame_length--; * } else { - * accept_frame = FALSE; + * accept_frame = false; * } * ... */ @@ -2080,7 +2075,7 @@ struct e1000_hw { #define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */ #define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */ #define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */ -#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */ +#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=false Carrier */ #define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */ #define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */ #define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */ diff --git a/drivers/net/e1000_spi.c b/drivers/net/e1000_spi.c index 5f774f4d8a..93043a1ade 100644 --- a/drivers/net/e1000_spi.c +++ b/drivers/net/e1000_spi.c @@ -17,7 +17,7 @@ * never return an error. */ static int e1000_spi_xfer(struct e1000_hw *hw, unsigned int bitlen, - const void *dout_mem, void *din_mem, boolean_t intr) + const void *dout_mem, void *din_mem, bool intr) { const uint8_t *dout = dout_mem; uint8_t *din = din_mem; @@ -145,7 +145,7 @@ int spi_xfer(struct spi_slave *spi, unsigned int bitlen, if (flags & SPI_XFER_BEGIN) e1000_standby_eeprom(hw); - ret = e1000_spi_xfer(hw, bitlen, dout_mem, din_mem, TRUE); + ret = e1000_spi_xfer(hw, bitlen, dout_mem, din_mem, true); if (flags & SPI_XFER_END) e1000_standby_eeprom(hw); @@ -169,7 +169,7 @@ int spi_xfer(struct spi_slave *spi, unsigned int bitlen, #define SPI_EEPROM_STATUS_BUSY 0x01 #define SPI_EEPROM_STATUS_WREN 0x02 -static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, boolean_t intr) +static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, bool intr) { u8 op[] = { SPI_EEPROM_ENABLE_WR }; e1000_standby_eeprom(hw); @@ -181,7 +181,7 @@ static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, boolean_t intr) * of the EEPROM commands at this time. */ #if 0 -static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, boolean_t intr) +static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, bool intr) { u8 op[] = { SPI_EEPROM_DISABLE_WR }; e1000_standby_eeprom(hw); @@ -189,7 +189,7 @@ static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, boolean_t intr) } static int e1000_spi_eeprom_write_status(struct e1000_hw *hw, - u8 status, boolean_t intr) + u8 status, bool intr) { u8 op[] = { SPI_EEPROM_WRITE_STATUS, status }; e1000_standby_eeprom(hw); @@ -197,7 +197,7 @@ static int e1000_spi_eeprom_write_status(struct e1000_hw *hw, } #endif -static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, boolean_t intr) +static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, bool intr) { u8 op[] = { SPI_EEPROM_READ_STATUS, 0 }; e1000_standby_eeprom(hw); @@ -207,7 +207,7 @@ static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, boolean_t intr) } static int e1000_spi_eeprom_write_page(struct e1000_hw *hw, - const void *data, u16 off, u16 len, boolean_t intr) + const void *data, u16 off, u16 len, bool intr) { u8 op[] = { SPI_EEPROM_WRITE_PAGE, @@ -225,7 +225,7 @@ static int e1000_spi_eeprom_write_page(struct e1000_hw *hw, } static int e1000_spi_eeprom_read_page(struct e1000_hw *hw, - void *data, u16 off, u16 len, boolean_t intr) + void *data, u16 off, u16 len, bool intr) { u8 op[] = { SPI_EEPROM_READ_PAGE, @@ -242,7 +242,7 @@ static int e1000_spi_eeprom_read_page(struct e1000_hw *hw, return 0; } -static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, boolean_t intr) +static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, bool intr) { int status; while ((status = e1000_spi_eeprom_read_status(hw, intr)) >= 0) { @@ -253,7 +253,7 @@ static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, boolean_t intr) } static int e1000_spi_eeprom_dump(struct e1000_hw *hw, - void *data, u16 off, unsigned int len, boolean_t intr) + void *data, u16 off, unsigned int len, bool intr) { /* Interruptibly wait for the EEPROM to be ready */ if (e1000_spi_eeprom_poll_ready(hw, intr)) @@ -282,7 +282,7 @@ static int e1000_spi_eeprom_dump(struct e1000_hw *hw, } static int e1000_spi_eeprom_program(struct e1000_hw *hw, - const void *data, u16 off, u16 len, boolean_t intr) + const void *data, u16 off, u16 len, bool intr) { /* Program each page in sequence */ while (len) { @@ -362,7 +362,7 @@ static int do_e1000_spi_show(cmd_tbl_t *cmdtp, struct e1000_hw *hw, free(buffer); return 1; } - err = e1000_spi_eeprom_dump(hw, buffer, offset, length, TRUE); + err = e1000_spi_eeprom_dump(hw, buffer, offset, length, true); e1000_release_eeprom(hw); if (err) { E1000_ERR(hw->nic, "Interrupted!\n"); @@ -421,7 +421,7 @@ static int do_e1000_spi_dump(cmd_tbl_t *cmdtp, struct e1000_hw *hw, } /* Perform the programming operation */ - if (e1000_spi_eeprom_dump(hw, dest, offset, length, TRUE) < 0) { + if (e1000_spi_eeprom_dump(hw, dest, offset, length, true) < 0) { E1000_ERR(hw->nic, "Interrupted!\n"); e1000_release_eeprom(hw); return 1; @@ -456,7 +456,7 @@ static int do_e1000_spi_program(cmd_tbl_t *cmdtp, struct e1000_hw *hw, } /* Perform the programming operation */ - if (e1000_spi_eeprom_program(hw, source, offset, length, TRUE) < 0) { + if (e1000_spi_eeprom_program(hw, source, offset, length, true) < 0) { E1000_ERR(hw->nic, "Interrupted!\n"); e1000_release_eeprom(hw); return 1; @@ -472,7 +472,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw, { uint16_t i, length, checksum = 0, checksum_reg; uint16_t *buffer; - boolean_t upd; + bool upd; if (argc == 0) upd = 0; @@ -498,7 +498,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw, } /* Read the EEPROM */ - if (e1000_spi_eeprom_dump(hw, buffer, 0, length, TRUE) < 0) { + if (e1000_spi_eeprom_dump(hw, buffer, 0, length, true) < 0) { E1000_ERR(hw->nic, "Interrupted!\n"); e1000_release_eeprom(hw); return 1; @@ -533,7 +533,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw, printf("%s: Reprogramming the EEPROM checksum...\n", hw->nic->name); buffer[i] = cpu_to_le16(checksum); if (e1000_spi_eeprom_program(hw, &buffer[i], i * sizeof(uint16_t), - sizeof(uint16_t), TRUE)) { + sizeof(uint16_t), true)) { E1000_ERR(hw->nic, "Interrupted!\n"); e1000_release_eeprom(hw); return 1; diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h index 5446de4bb9..eee0956fdb 100644 --- a/drivers/net/ne2000_base.h +++ b/drivers/net/ne2000_base.h @@ -79,10 +79,6 @@ are GPL, so this is, of course, GPL. #ifndef __NE2000_BASE_H__ #define __NE2000_BASE_H__ -#define bool int -#define false 0 -#define true 1 - /* * Debugging details * diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c index 20d3d9e9b1..7185558955 100644 --- a/drivers/net/npe/IxEthAcc.c +++ b/drivers/net/npe/IxEthAcc.c @@ -82,7 +82,7 @@ extern PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex; * @ingroup IxEthAccPri * */ -BOOL ixEthAccServiceInit = FALSE; +BOOL ixEthAccServiceInit = false; /* global filtering bit mask */ PUBLIC UINT32 ixEthAccNewSrcMask; @@ -168,7 +168,7 @@ PUBLIC IxEthAccStatus ixEthAccInit() } /* initialiasation is complete */ - ixEthAccServiceInit = TRUE; + ixEthAccServiceInit = true; return IX_ETH_ACC_SUCCESS; @@ -200,11 +200,11 @@ PUBLIC void ixEthAccUnload(void) /* set all ports as uninitialized */ for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) { - ixEthAccPortData[portId].portInitialized = FALSE; + ixEthAccPortData[portId].portInitialized = false; } /* uninitialize the service */ - ixEthAccServiceInit = FALSE; + ixEthAccServiceInit = false; } } @@ -248,7 +248,7 @@ PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId) * Set the port init flag. */ - ixEthAccPortData[portId].portInitialized = TRUE; + ixEthAccPortData[portId].portInitialized = true; #ifdef CONFIG_IXP425_COMPONENT_ETHDB /* init learning/filtering database structures for this port */ diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c index 211203dffd..b93a8c8a31 100644 --- a/drivers/net/npe/IxEthAccCommon.c +++ b/drivers/net/npe/IxEthAccCommon.c @@ -102,7 +102,7 @@ IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate = (IxQMgrCallbackId) 0, /**< Callback tag */ IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - TRUE, /**< Enable Q notification at startup */ + true, /**< Enable Q notification at startup */ IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ @@ -122,7 +122,7 @@ IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate = (IxQMgrCallbackId) 0, /**< Callback tag */ IX_QMGR_Q_SIZE64, /**< Allocate Smaller Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - TRUE, /**< Enable Q notification at startup */ + true, /**< Enable Q notification at startup */ IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ @@ -144,7 +144,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_1, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - FALSE, /**< Disable Q notification at startup */ + false, /**< Disable Q notification at startup */ IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */ IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ @@ -157,7 +157,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_2, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - FALSE, /**< Disable Q notification at startup */ + false, /**< Disable Q notification at startup */ IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ @@ -170,7 +170,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_3, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - FALSE, /**< Disable Q notification at startup */ + false, /**< Disable Q notification at startup */ IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ @@ -183,7 +183,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_1, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - FALSE, /**< Disable Q notification at startup */ + false, /**< Disable Q notification at startup */ IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ @@ -196,7 +196,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_2, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - FALSE, /**< Disable Q notification at startup */ + false, /**< Disable Q notification at startup */ IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ @@ -209,7 +209,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) IX_ETH_PORT_3, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /** Queue Entry Sizes - all Q entries are single ord entries */ - FALSE, /** Disable Q notification at startup */ + false, /** Disable Q notification at startup */ IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE, /** Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */ IX_QMGR_Q_WM_LEVEL64, /** Q High water mark - needed used */ @@ -222,7 +222,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= (IxQMgrCallbackId) 0, IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ - TRUE, /**< Enable Q notification at startup */ + true, /**< Enable Q notification at startup */ IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback */ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ IX_QMGR_Q_WM_LEVEL2, /**< Q High water mark - needed by NPE */ @@ -449,7 +449,7 @@ ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes) /* * Set notification condition for Q */ - if ( qInfoDes->qNotificationEnableAtStartup == TRUE ) + if (qInfoDes->qNotificationEnableAtStartup == true) { if ( ixQMgrNotificationEnable(qInfoDes->qId, qInfoDes->qConditionSource) @@ -513,7 +513,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void) IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY; UINT32 ixEthDBParameter = 0; - BOOL completelySorted = FALSE; + BOOL completelySorted = false; /* Fill the corspondance between ports and queues * This defines the mapping from port to queue Ids. @@ -706,7 +706,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void) do { sortIterations++; - completelySorted = TRUE; + completelySorted = true; for (rxQueue = 0; rxQueue < rxQueueCount - sortIterations; rxQueue++) @@ -732,7 +732,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void) rxQueues[rxQueue+1].npeId = npeId; rxQueues[rxQueue+1].qId = qId; rxQueues[rxQueue+1].trafficClass = trafficClass; - completelySorted = FALSE; + completelySorted = false; } } } diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c index b62f0d016e..6df3307e5d 100644 --- a/drivers/net/npe/IxEthAccDataPlane.c +++ b/drivers/net/npe/IxEthAccDataPlane.c @@ -948,7 +948,7 @@ IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) { if ((ixEthAccMacState[port].portDisableState == ACTIVE) - && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == TRUE)) + && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == true)) { /* one of the active ports has a different rx callback type. * Changing the callback type when the port is enabled @@ -977,7 +977,7 @@ IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, return (IX_ETH_ACC_INVALID_ARG); } - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = FALSE; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = false; return (IX_ETH_ACC_SUCCESS); } @@ -1025,7 +1025,7 @@ IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister( for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) { if ((ixEthAccMacState[port].portDisableState == ACTIVE) - && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == FALSE)) + && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == false)) { /* one of the active ports has a different rx callback type. * Changing the callback type when the port is enabled @@ -1055,7 +1055,7 @@ IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister( return (IX_ETH_ACC_INVALID_ARG); } - ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = TRUE; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = true; return (IX_ETH_ACC_SUCCESS); } @@ -1456,7 +1456,7 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) IX_ETH_ACC_FATAL_LOG( "ixEthRxFrameProcess: Illegal port: %u\n", (UINT32)portId, 0, 0, 0, 0, 0); - return FALSE; + return false; } #endif @@ -1468,7 +1468,7 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) if ((flags & (IX_ETHACC_NE_FILTERMASK | IX_ETHACC_NE_NEWSRCMASK)) == 0) { /* "best case" scenario : nothing special to do for this frame */ - return TRUE; + return true; } #ifdef CONFIG_IXP425_COMPONENT_ETHDB @@ -1540,10 +1540,10 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) RX_STATS_INC(portId, rxFiltered); /* indicate that frame should not be subjected to further processing */ - return FALSE; + return false; } - return TRUE; + return true; } diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c index 369ee91d94..5540b33ae8 100644 --- a/drivers/net/npe/IxEthAccMac.c +++ b/drivers/net/npe/IxEthAccMac.c @@ -304,7 +304,7 @@ ixEthAccPortEnablePriv(IxEthAccPortId portId) /* set the global state */ ixEthAccMacState[portId].portDisableState = ACTIVE; - ixEthAccMacState[portId].enabled = TRUE; + ixEthAccMacState[portId].enabled = true; /* rewrite the setup (including mac filtering) depending * on current options @@ -515,7 +515,7 @@ ixEthAccPortDisableRxCallback (UINT32 cbTag, IxEthAccPortId portId = (IxEthAccPortId)cbTag; /* call the portDisable receive callback */ - (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, FALSE); + (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, false); } PRIVATE void @@ -527,7 +527,7 @@ ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag, while (*mBufPtr) { /* call the portDisable receive callback with one buffer at a time */ - (ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, TRUE); + (ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, true); } } @@ -820,7 +820,7 @@ ixEthAccPortDisablePriv(IxEthAccPortId portId) } /* disable MAC Tx and Rx services */ - ixEthAccMacState[portId].enabled = FALSE; + ixEthAccMacState[portId].enabled = false; ixEthAccMacStateUpdate(portId); /* restore the Rx and TxDone callbacks (within a critical section) */ @@ -869,14 +869,14 @@ ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled) IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0); /* Since Eth NPE is not available, port must be disabled */ - *enabled = FALSE ; + *enabled = false ; return IX_ETH_ACC_SUCCESS ; } if (!IX_ETH_IS_PORT_INITIALIZED(portId)) { /* Since Eth NPE is not available, port must be disabled */ - *enabled = FALSE ; + *enabled = false ; return (IX_ETH_ACC_PORT_UNINITIALIZED); } @@ -1259,7 +1259,7 @@ ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId) IX_ETH_ACC_MAC_RX_CNTRL1, regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); - ixEthAccMacState[portId].promiscuous = FALSE; + ixEthAccMacState[portId].promiscuous = false; ixEthAccMulticastAddressSet(portId); @@ -1297,7 +1297,7 @@ ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId) IX_ETH_ACC_MAC_RX_CNTRL1, regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); - ixEthAccMacState[portId].promiscuous = TRUE; + ixEthAccMacState[portId].promiscuous = true; ixEthAccMulticastAddressSet(portId); @@ -1361,7 +1361,7 @@ ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId, IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32), macAddr->macAddress[i]); } - ixEthAccMacState[portId].initDone = TRUE; + ixEthAccMacState[portId].initDone = true; return IX_ETH_ACC_SUCCESS; } @@ -1552,7 +1552,7 @@ ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId) IX_IEEE803_MAC_ADDRESS_SIZE); ixEthAccMacState[portId].mcastAddrIndex = 1; - ixEthAccMacState[portId].joinAll = TRUE; + ixEthAccMacState[portId].joinAll = true; ixEthAccMulticastAddressSet(portId); @@ -1599,7 +1599,7 @@ ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId, { if(ixEthAccMacEqual(macAddr, &mcastMacAddr)) { - ixEthAccMacState[portId].joinAll = FALSE; + ixEthAccMacState[portId].joinAll = false; } /*Decrement the index into the multicast address table for the current port*/ @@ -1643,7 +1643,7 @@ ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId) } ixEthAccMacState[portId].mcastAddrIndex = 0; - ixEthAccMacState[portId].joinAll = FALSE; + ixEthAccMacState[portId].joinAll = false; ixEthAccMulticastAddressSet(portId); @@ -1770,7 +1770,7 @@ ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId, REG_WRITE(ixEthAccMacBase[portId], IX_ETH_ACC_MAC_RX_CNTRL1, rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN); - ixEthAccMacState[portId].fullDuplex = TRUE; + ixEthAccMacState[portId].fullDuplex = true; } else if (mode == IX_ETH_ACC_HALF_DUPLEX) @@ -1786,7 +1786,7 @@ ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId, IX_ETH_ACC_MAC_RX_CNTRL1, rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN); - ixEthAccMacState[portId].fullDuplex = FALSE; + ixEthAccMacState[portId].fullDuplex = false; } else { @@ -1876,7 +1876,7 @@ ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId) regval | IX_ETH_ACC_TX_CNTRL1_PAD_EN); - ixEthAccMacState[portId].txPADAppend = TRUE; + ixEthAccMacState[portId].txPADAppend = true; return IX_ETH_ACC_SUCCESS; } @@ -1908,7 +1908,7 @@ ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId) IX_ETH_ACC_MAC_TX_CNTRL1, regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN); - ixEthAccMacState[portId].txPADAppend = FALSE; + ixEthAccMacState[portId].txPADAppend = false; return IX_ETH_ACC_SUCCESS; } @@ -1941,7 +1941,7 @@ ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId) IX_ETH_ACC_MAC_TX_CNTRL1, regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN); - ixEthAccMacState[portId].txFCSAppend = TRUE; + ixEthAccMacState[portId].txFCSAppend = true; return IX_ETH_ACC_SUCCESS; } @@ -1973,7 +1973,7 @@ ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId) IX_ETH_ACC_MAC_TX_CNTRL1, regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN); - ixEthAccMacState[portId].txFCSAppend = FALSE; + ixEthAccMacState[portId].txFCSAppend = false; return IX_ETH_ACC_SUCCESS; } @@ -2004,7 +2004,7 @@ ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId) IX_ETH_ACC_MAC_RX_CNTRL1, regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN); - ixEthAccMacState[portId].rxFCSAppend = TRUE; + ixEthAccMacState[portId].rxFCSAppend = true; return IX_ETH_ACC_SUCCESS; } @@ -2035,7 +2035,7 @@ ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId) IX_ETH_ACC_MAC_RX_CNTRL1, regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN); - ixEthAccMacState[portId].rxFCSAppend = FALSE; + ixEthAccMacState[portId].rxFCSAppend = false; return IX_ETH_ACC_SUCCESS; } @@ -2327,17 +2327,17 @@ ixEthAccMacInit(IxEthAccPortId portId) return IX_ETH_ACC_SUCCESS ; } - if(ixEthAccMacState[portId].macInitialised == FALSE) + if(ixEthAccMacState[portId].macInitialised == false) { - ixEthAccMacState[portId].fullDuplex = TRUE; - ixEthAccMacState[portId].rxFCSAppend = TRUE; - ixEthAccMacState[portId].txFCSAppend = TRUE; - ixEthAccMacState[portId].txPADAppend = TRUE; - ixEthAccMacState[portId].enabled = FALSE; - ixEthAccMacState[portId].promiscuous = TRUE; - ixEthAccMacState[portId].joinAll = FALSE; - ixEthAccMacState[portId].initDone = FALSE; - ixEthAccMacState[portId].macInitialised = TRUE; + ixEthAccMacState[portId].fullDuplex = true; + ixEthAccMacState[portId].rxFCSAppend = true; + ixEthAccMacState[portId].txFCSAppend = true; + ixEthAccMacState[portId].txPADAppend = true; + ixEthAccMacState[portId].enabled = false; + ixEthAccMacState[portId].promiscuous = true; + ixEthAccMacState[portId].joinAll = false; + ixEthAccMacState[portId].initDone = false; + ixEthAccMacState[portId].macInitialised = true; /* initialize MIB stats mutexes */ ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock); @@ -2417,7 +2417,7 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId) { UINT32 regval; - if ( ixEthAccMacState[portId].enabled == FALSE ) + if ( ixEthAccMacState[portId].enabled == false ) { /* Just disable both the transmitter and reciver in the MAC. */ REG_READ(ixEthAccMacBase[portId], @@ -2480,7 +2480,7 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId) ixEthAccPortPromiscuousModeClearPriv(portId); } - if ( ixEthAccMacState[portId].enabled == TRUE ) + if ( ixEthAccMacState[portId].enabled == true ) { /* Enable both the transmitter and reciver in the MAC. */ REG_READ(ixEthAccMacBase[portId], @@ -2509,10 +2509,10 @@ ixEthAccMacEqual(IxEthAccMacAddr *macAddr1, { if(macAddr1->macAddress[i] != macAddr2->macAddress[i]) { - return FALSE; + return false; } } - return TRUE; + return true; } PRIVATE void @@ -2554,7 +2554,7 @@ ixEthAccMulticastAddressSet(IxEthAccPortId portId) * are set in the result */ - if (ixEthAccMacState[portId].promiscuous == TRUE) + if (ixEthAccMacState[portId].promiscuous == true) { /* Promiscuous Mode is set, and filtering * allow all packets, and enable the mcast and @@ -2569,7 +2569,7 @@ ixEthAccMulticastAddressSet(IxEthAccPortId portId) } else { - if(ixEthAccMacState[portId].joinAll == TRUE) + if(ixEthAccMacState[portId].joinAll == true) { /* Join all is set. The mask and address are * the multicast settings. diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c index b2bfb72606..d46c47c2ef 100644 --- a/drivers/net/npe/IxEthDBAPI.c +++ b/drivers/net/npe/IxEthDBAPI.c @@ -60,7 +60,7 @@ IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDB IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - return ixEthDBTriggerAddPortUpdate(macAddr, portID, TRUE); + return ixEthDBTriggerAddPortUpdate(macAddr, portID, true); } IX_ETH_DB_PUBLIC @@ -74,7 +74,7 @@ IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthD IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - return ixEthDBTriggerAddPortUpdate(macAddr, portID, FALSE); + return ixEthDBTriggerAddPortUpdate(macAddr, portID, false); } IX_ETH_DB_PUBLIC @@ -102,7 +102,7 @@ void ixEthDBDatabaseMaintenance() { HashIterator iterator; UINT32 portIndex; - BOOL agingRequired = FALSE; + BOOL agingRequired = false; /* ports who will have deleted records and therefore will need updating */ IxEthDBPortMap triggerPorts; @@ -120,7 +120,7 @@ void ixEthDBDatabaseMaintenance() { if (ixEthDBPortInfo[portIndex].agingEnabled && ixEthDBPortInfo[portIndex].enabled) { - agingRequired = TRUE; + agingRequired = true; } } @@ -152,9 +152,9 @@ void ixEthDBDatabaseMaintenance() } else { - ixEthDBPortInfo[portIndex].agingEnabled = FALSE; - ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE; - ixEthDBPortInfo[portIndex].updateMethod.userControlled = TRUE; + ixEthDBPortInfo[portIndex].agingEnabled = false; + ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false; + ixEthDBPortInfo[portIndex].updateMethod.userControlled = true; ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, @@ -173,7 +173,7 @@ void ixEthDBDatabaseMaintenance() { MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; UINT32 *age = NULL; - BOOL staticEntry = TRUE; + BOOL staticEntry = true; if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) { @@ -187,10 +187,10 @@ void ixEthDBDatabaseMaintenance() } else { - staticEntry = TRUE; + staticEntry = true; } - if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == FALSE)) + if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == false)) { /* manually increment the age if the port has no such capability */ if ((ixEthDBPortDefinitions[descriptor->portID].capabilities & IX_ETH_ENTRY_AGING) == 0) @@ -341,7 +341,7 @@ IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - ixEthDBPortInfo[portID].agingEnabled = FALSE; + ixEthDBPortInfo[portID].agingEnabled = false; return IX_ETH_DB_SUCCESS; } @@ -355,7 +355,7 @@ IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); - ixEthDBPortInfo[portID].agingEnabled = TRUE; + ixEthDBPortInfo[portID].agingEnabled = true; return IX_ETH_DB_SUCCESS; } @@ -442,7 +442,7 @@ IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); ixEthDBPortInfo[portID].updateMethod.updateEnabled = enableUpdate; - ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE; + ixEthDBPortInfo[portID].updateMethod.userControlled = true; return IX_ETH_DB_SUCCESS; } diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c index 36bc200a3f..1facb89fd8 100644 --- a/drivers/net/npe/IxEthDBAPISupport.c +++ b/drivers/net/npe/IxEthDBAPISupport.c @@ -128,18 +128,18 @@ void ixEthDBPortInit(IxEthDBPortId portID) SET_DEPENDENCY_MAP(portInfo->dependencyPortMap, portID); /* default values */ - portInfo->agingEnabled = FALSE; - portInfo->enabled = FALSE; - portInfo->macAddressUploaded = FALSE; + portInfo->agingEnabled = false; + portInfo->enabled = false; + portInfo->macAddressUploaded = false; portInfo->maxRxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; portInfo->maxTxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; /* default update control values */ portInfo->updateMethod.searchTree = NULL; - portInfo->updateMethod.searchTreePendingWrite = FALSE; - portInfo->updateMethod.treeInitialized = FALSE; - portInfo->updateMethod.updateEnabled = FALSE; - portInfo->updateMethod.userControlled = FALSE; + portInfo->updateMethod.searchTreePendingWrite = false; + portInfo->updateMethod.treeInitialized = false; + portInfo->updateMethod.updateEnabled = false; + portInfo->updateMethod.userControlled = false; /* default WiFi parameters */ memset(portInfo->bbsid, 0, sizeof (portInfo->bbsid)); @@ -153,9 +153,9 @@ void ixEthDBPortInit(IxEthDBPortId portID) } /* initialize state save */ - ixEthDBPortState[portID].saved = FALSE; + ixEthDBPortState[portID].saved = false; - portInfo->initialized = TRUE; + portInfo->initialized = true; } /** @@ -190,7 +190,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) SET_DEPENDENCY_MAP(triggerPorts, portID); /* mark as enabled */ - portInfo->enabled = TRUE; + portInfo->enabled = true; /* Operation stops here when Ethernet Learning is not enabled */ if(IX_FEATURE_CTRL_SWCONFIG_DISABLED == @@ -214,7 +214,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) if (!portInfo->updateMethod.userControlled && ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0)) { - portInfo->updateMethod.updateEnabled = TRUE; + portInfo->updateMethod.updateEnabled = true; } /* if this is first time initialization then we already have @@ -227,7 +227,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) ixEthDBUpdatePortLearningTrees(triggerPorts); /* mark tree as being initialized */ - portInfo->updateMethod.treeInitialized = TRUE; + portInfo->updateMethod.treeInitialized = true; } } @@ -262,7 +262,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) ixEthDBFilteringPortMaximumTxFrameSizeSet(portID, ixEthDBPortState[portID].maxTxFrameSize); /* discard previous save */ - ixEthDBPortState[portID].saved = FALSE; + ixEthDBPortState[portID].saved = false; } IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Enabling succeeded for port %d\n", portID); @@ -321,7 +321,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) memcpy(ixEthDBPortState[portID].transmitTaggingInfo, portInfo->transmitTaggingInfo, sizeof (IxEthDBVlanSet)); memcpy(ixEthDBPortState[portID].priorityTable, portInfo->priorityTable, sizeof (IxEthDBPriorityTable)); - ixEthDBPortState[portID].saved = TRUE; + ixEthDBPortState[portID].saved = true; /* now turn off all EthDB filtering features on the port */ @@ -330,7 +330,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) { ixEthDBPortVlanMembershipRangeAdd((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); - ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, FALSE); + ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, false); ixEthDBAcceptableFrameTypeSet((IxEthDBPortId) portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); ixEthDBIngressVlanTaggingEnabledSet((IxEthDBPortId) portID, IX_ETH_DB_PASS_THROUGH); @@ -342,7 +342,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) /* STP */ if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) { - ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, FALSE); + ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, false); } /* Firewall */ @@ -350,7 +350,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) { ixEthDBFirewallModeSet((IxEthDBPortId) portID, IX_ETH_DB_FIREWALL_BLACK_LIST); ixEthDBFirewallTableDownload((IxEthDBPortId) portID); - ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, FALSE); + ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, false); } /* Frame size filter */ @@ -413,18 +413,18 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) } /* mark as disabled */ - portInfo->enabled = FALSE; + portInfo->enabled = false; /* disable updates unless the user has specifically altered the default behavior */ if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) { if (!portInfo->updateMethod.userControlled) { - portInfo->updateMethod.updateEnabled = FALSE; + portInfo->updateMethod.updateEnabled = false; } /* make sure we re-initialize the NPE learning tree when the port is re-enabled */ - portInfo->updateMethod.treeInitialized = FALSE; + portInfo->updateMethod.treeInitialized = false; } ixEthDBUpdateUnlock(); @@ -668,7 +668,7 @@ IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAdd if (result == IX_SUCCESS) { - ixEthDBPortInfo[portID].macAddressUploaded = TRUE; + ixEthDBPortInfo[portID].macAddressUploaded = true; } return result; diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c index 25b7cbb8b8..8b3c1d9a80 100644 --- a/drivers/net/npe/IxEthDBCore.c +++ b/drivers/net/npe/IxEthDBCore.c @@ -51,7 +51,7 @@ IX_ETH_DB_PUBLIC BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyType[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; /* private initialization flag */ -IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = FALSE; +IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = false; /** * @brief initializes EthDB @@ -124,7 +124,7 @@ IxEthDBStatus ixEthDBInit(void) ixEthDBFeatureCapabilityScan(); } - ethDBInitializationComplete = TRUE; + ethDBInitializationComplete = true; return result; } @@ -179,7 +179,7 @@ IxEthDBStatus ixEthDBUnload(void) ixOsalMutexDestroy(&ixEthDBPortInfo[portIndex].npeAckLock); } - ixEthDBPortInfo[portIndex].initialized = FALSE; + ixEthDBPortInfo[portIndex].initialized = false; } /* shutdown event processor */ @@ -188,7 +188,7 @@ IxEthDBStatus ixEthDBUnload(void) /* deallocate NPE update zones */ ixEthDBNPEUpdateAreasUnload(); - ethDBInitializationComplete = FALSE; + ethDBInitializationComplete = false; return IX_ETH_DB_SUCCESS; } diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c index 4d44e03337..529063d1ff 100644 --- a/drivers/net/npe/IxEthDBEvents.c +++ b/drivers/net/npe/IxEthDBEvents.c @@ -61,8 +61,8 @@ IX_ETH_DB_PRIVATE PortEventQueue eventQueue; IX_ETH_DB_PRIVATE IxOsalMutex eventQueueLock; IX_ETH_DB_PRIVATE IxOsalMutex portUpdateLock; -IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = FALSE; -IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = FALSE; +IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = false; +IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = false; /* imported data */ extern HashTable dbHashtable; @@ -143,7 +143,7 @@ IxEthDBStatus ixEthDBStartLearningFunction(void) return IX_ETH_DB_FAIL; } - ixEthDBLearningShutdown = FALSE; + ixEthDBLearningShutdown = false; /* create processor loop thread */ if (ixOsalThreadCreate(&eventProcessorThread, &threadAttr, ixEthDBEventProcessorLoop, NULL) != IX_SUCCESS) @@ -173,7 +173,7 @@ IxEthDBStatus ixEthDBStartLearningFunction(void) IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void) { - ixEthDBLearningShutdown = TRUE; + ixEthDBLearningShutdown = true; /* wake up event processing loop to actually process the shutdown event */ ixOsalSemaphorePost(&eventQueueSemaphore); @@ -253,13 +253,13 @@ void ixEthDBEventProcessorLoop(void *unused1) IxEthDBPortMap triggerPorts; IxEthDBPortId portIndex; - ixEthDBEventProcessorRunning = TRUE; + ixEthDBEventProcessorRunning = true; IX_ETH_DB_EVENTS_TRACE("DB: (Events) Event processor loop was started\n"); while (!ixEthDBLearningShutdown) { - BOOL keepProcessing = TRUE; + BOOL keepProcessing = true; UINT32 processedEvents = 0; IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Waiting for new learning event...\n"); @@ -302,7 +302,7 @@ void ixEthDBEventProcessorLoop(void *unused1) if (processedEvents > EVENT_PROCESSING_LIMIT /* maximum burst reached? */ || ixOsalSemaphoreTryWait(&eventQueueSemaphore) != IX_SUCCESS) /* or empty queue? */ { - keepProcessing = FALSE; + keepProcessing = false; } } @@ -313,10 +313,10 @@ void ixEthDBEventProcessorLoop(void *unused1) /* turn off automatic updates */ for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) { - ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE; + ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false; } - ixEthDBEventProcessorRunning = FALSE; + ixEthDBEventProcessorRunning = false; } /** @@ -381,7 +381,7 @@ void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts) * * @param macAddr MAC address of the new record * @param portID port ID of the new record - * @param staticEntry TRUE if record is static, FALSE if dynamic + * @param staticEntry true if record is static, false if dynamic * * @return IX_ETH_DB_SUCCESS if the event creation was * successfull or IX_ETH_DB_BUSY if the event queue is full @@ -430,7 +430,7 @@ IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPor { if (ixEthDBPeek(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS) != IX_ETH_DB_NO_SUCH_ADDR) { - return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, FALSE); + return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, false); } else { diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c index 7a58d268ca..c5b680a742 100644 --- a/drivers/net/npe/IxEthDBFeatures.c +++ b/drivers/net/npe/IxEthDBFeatures.c @@ -169,7 +169,7 @@ void ixEthDBFeatureCapabilityScan(void) /* enable port, VLAN and Firewall feature bits to initialize QoS/VLAN/Firewall configuration */ portInfo->featureStatus |= IX_ETH_DB_VLAN_QOS; portInfo->featureStatus |= IX_ETH_DB_FIREWALL; - portInfo->enabled = TRUE; + portInfo->enabled = true; #define CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ #ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ @@ -195,7 +195,7 @@ void ixEthDBFeatureCapabilityScan(void) ixEthDBPortVlanMembershipRangeRemove(portIndex, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); /* clear TTI table - no VLAN tagged frames will be transmitted */ - ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, FALSE); + ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, false); /* set membership on 0, otherwise no Tx or Rx is working */ ixEthDBPortVlanMembershipAdd(portIndex, 0); @@ -221,12 +221,12 @@ void ixEthDBFeatureCapabilityScan(void) #endif /* by default we turn off invalid source MAC address filtering */ - ixEthDBFirewallInvalidAddressFilterEnable(portIndex, FALSE); + ixEthDBFirewallInvalidAddressFilterEnable(portIndex, false); /* disable port, VLAN, Firewall feature bits */ portInfo->featureStatus &= ~IX_ETH_DB_VLAN_QOS; portInfo->featureStatus &= ~IX_ETH_DB_FIREWALL; - portInfo->enabled = FALSE; + portInfo->enabled = false; /* enable filtering by default if present */ if ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0) @@ -271,7 +271,7 @@ IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature * * * @param portID ID of the port * @param feature feature to enable or disable - * @param enabled TRUE to enable the selected feature or FALSE to disable it + * @param enabled true to enable the selected feature or false to disable it * * Note that this function is documented in the main component * header file, IxEthDB.h. @@ -333,7 +333,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, } /* force port enabled */ - portInfo->enabled = TRUE; + portInfo->enabled = true; if (enable) { @@ -399,7 +399,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, /* enable TPID port extraction */ if (status == IX_ETH_DB_SUCCESS) { - status = ixEthDBVlanPortExtractionEnable(portID, TRUE); + status = ixEthDBVlanPortExtractionEnable(portID, true); } } else if (feature == IX_ETH_DB_FIREWALL) @@ -414,7 +414,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, if (status == IX_ETH_DB_SUCCESS) { - status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE); + status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false); } } } @@ -445,7 +445,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, if (status == IX_ETH_DB_SUCCESS) { - status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE); + status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false); } if (status == IX_ETH_DB_SUCCESS) @@ -515,7 +515,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, /* disable TPID port extraction */ if (status == IX_ETH_DB_SUCCESS) { - status = ixEthDBVlanPortExtractionEnable(portID, FALSE); + status = ixEthDBVlanPortExtractionEnable(portID, false); } } #endif @@ -538,9 +538,9 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, * * @param portID port ID * @param present location to store a boolean value indicating - * if the feature is present (TRUE) or not (FALSE) + * if the feature is present (true) or not (false) * @param enabled location to store a booleam value indicating - * if the feature is present (TRUE) or not (FALSE) + * if the feature is present (true) or not (false) * * Note that this function is documented in the main component * header file, IxEthDB.h. diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c index eb46174b6c..6fb5ab6acd 100644 --- a/drivers/net/npe/IxEthDBFirewall.c +++ b/drivers/net/npe/IxEthDBFirewall.c @@ -72,7 +72,7 @@ IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 UINT32 mode = 0; PortInfo *portInfo = &ixEthDBPortInfo[portID]; - mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST); + mode = (portInfo->srcAddressFilterEnabled != false) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST); FILL_SETFIREWALLMODE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), @@ -123,8 +123,8 @@ IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode m * @brief enables or disables the invalid source MAC address filter * * @param portID ID of the port - * @param enable TRUE to enable invalid source MAC address filtering - * or FALSE to disable it + * @param enable true to enable invalid source MAC address filtering + * or false to disable it * * The invalid source MAC address filter will discard, when enabled, * frames whose source MAC address is a multicast or the broadcast MAC diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c index 2287dbe96c..840674152f 100644 --- a/drivers/net/npe/IxEthDBLearning.c +++ b/drivers/net/npe/IxEthDBLearning.c @@ -105,8 +105,8 @@ UINT32 ixEthDBKeyXORHash(void *key) * collisions, i.e. descriptors with different mac addresses and the same * hash value, where this function is used to differentiate entries. * - * @retval TRUE if the entry matches the reference key (equal addresses) - * @retval FALSE if the entry does not match the reference key + * @retval true if the entry matches the reference key (equal addresses) + * @retval false if the entry does not match the reference key * * @internal */ diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c index 112a46c998..d47ffec8b5 100644 --- a/drivers/net/npe/IxEthDBNPEAdaptor.c +++ b/drivers/net/npe/IxEthDBNPEAdaptor.c @@ -203,7 +203,7 @@ void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSi /* debug */ IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE); - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != TRUE) + if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != true) { IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n"); } diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c index cdf114bfc4..813e4ee6b5 100644 --- a/drivers/net/npe/IxEthDBPortUpdate.c +++ b/drivers/net/npe/IxEthDBPortUpdate.c @@ -60,7 +60,7 @@ extern HashTable dbHashtable; * * @param typeArray array indexed on record types, each * element indicating whether the record type requires an - * automatic update (TRUE) or not (FALSE) + * automatic update (true) or not (false) * * Automatic updates are done for registered record types * upon adding, updating (that is, updating the record portID) @@ -70,7 +70,7 @@ extern HashTable dbHashtable; * * It is assumed that the typeArray parameter is allocated large * enough to hold all the user defined types. Also, the type - * array should be initialized to FALSE as this function only + * array should be initialized to false as this function only * caters for types which do require automatic updates. * * Note that this function should be called by the component @@ -84,8 +84,8 @@ extern HashTable dbHashtable; IX_ETH_DB_PUBLIC UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray) { - typeArray[IX_ETH_DB_FILTERING_RECORD] = TRUE; - typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = TRUE; + typeArray[IX_ETH_DB_FILTERING_RECORD] = true; + typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = true; return 2; } @@ -174,7 +174,7 @@ void ixEthDBCreateTrees(IxEthDBPortMap updatePorts) { UINT32 portIndex; BOOL result; - BOOL portsLeft = TRUE; + BOOL portsLeft = true; while (portsLeft) { @@ -305,11 +305,11 @@ void ixEthDBCreateTrees(IxEthDBPortMap updatePorts) } /* mark tree as valid */ - port->updateMethod.searchTreePendingWrite = TRUE; + port->updateMethod.searchTreePendingWrite = true; } else { - portsLeft = FALSE; + portsLeft = false; IX_ETH_DB_UPDATE_TRACE("DB: (Update) No trees to create this round\n"); } @@ -374,7 +374,7 @@ IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType ty /* forget last used search tree */ port->updateMethod.searchTree = NULL; - port->updateMethod.searchTreePendingWrite = FALSE; + port->updateMethod.searchTreePendingWrite = false; /* dependending on the update type we do different things */ if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD) @@ -393,9 +393,9 @@ IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType ty } else { - ixEthDBPortInfo[portID].agingEnabled = FALSE; - ixEthDBPortInfo[portID].updateMethod.updateEnabled = FALSE; - ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE; + ixEthDBPortInfo[portID].agingEnabled = false; + ixEthDBPortInfo[portID].updateMethod.updateEnabled = false; + ixEthDBPortInfo[portID].updateMethod.userControlled = true; ERROR_LOG("EthDB: (PortUpdate) disabling aging and updates on port %d (assumed dead)\n", portID); diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c index 9c7ae1cc6a..912e608613 100644 --- a/drivers/net/npe/IxEthDBReports.c +++ b/drivers/net/npe/IxEthDBReports.c @@ -62,7 +62,7 @@ IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map) { UINT32 portIndex; - BOOL mapSelf = TRUE, mapNone = TRUE, firstPort = TRUE; + BOOL mapSelf = true, mapNone = true, firstPort = true; /* dependency port maps */ printf("Dependency port map: "); @@ -72,22 +72,22 @@ IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap { if (IS_PORT_INCLUDED(portIndex, map)) { - mapNone = FALSE; + mapNone = false; if (portIndex != portID) { - mapSelf = FALSE; + mapSelf = false; } printf("%s%d", firstPort ? "{" : ", ", portIndex); - firstPort = FALSE; + firstPort = false; } } if (mapNone) { - mapSelf = FALSE; + mapSelf = false; } printf("%s (%s)\n", firstPort ? "" : "}", mapSelf ? "self" : mapNone ? "none" : "group"); diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c index 4a10878b68..75fdebe483 100644 --- a/drivers/net/npe/IxEthDBSearch.c +++ b/drivers/net/npe/IxEthDBSearch.c @@ -50,7 +50,7 @@ extern HashTable dbHashtable; * @param untypedReference record to match against * @param untypedEntry record to match * - * @return TRUE if the match is successful or FALSE otherwise + * @return true if the match is successful or false otherwise * * @internal */ @@ -61,7 +61,7 @@ BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry) MacDescriptor *reference = (MacDescriptor *) untypedReference; /* check accepted record types */ - if ((entry->type & reference->type) == 0) return FALSE; + if ((entry->type & reference->type) == 0) return false; return (ixEthDBAddressCompare((UINT8 *) entry->macAddress, (UINT8 *) reference->macAddress) == 0); } @@ -73,7 +73,7 @@ BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry) * @param untypedReference record to match against * @param untypedEntry record to match * - * @return TRUE if the match is successful or FALSE otherwise + * @return true if the match is successful or false otherwise * * @internal */ @@ -84,7 +84,7 @@ BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry) MacDescriptor *reference = (MacDescriptor *) untypedReference; /* check accepted record types */ - if ((entry->type & reference->type) == 0) return FALSE; + if ((entry->type & reference->type) == 0) return false; return (IX_ETH_DB_GET_VLAN_ID(entry->recordData.filteringVlanData.ieee802_1qTag) == IX_ETH_DB_GET_VLAN_ID(reference->recordData.filteringVlanData.ieee802_1qTag)) && @@ -98,7 +98,7 @@ BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry) * @param untypedReference record to match against * @param untypedEntry record to match * - * @return TRUE if the match is successful or FALSE otherwise + * @return true if the match is successful or false otherwise * * @internal */ @@ -109,7 +109,7 @@ BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry) MacDescriptor *reference = (MacDescriptor *) untypedReference; /* check accepted record types */ - if ((entry->type & reference->type) == 0) return FALSE; + if ((entry->type & reference->type) == 0) return false; return (entry->portID == reference->portID) && (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0); @@ -125,7 +125,7 @@ BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry) * array on invalid types. Calling it will display an * error message, indicating an error in the component logic. * - * @return FALSE + * @return false * * @internal */ @@ -137,7 +137,7 @@ BOOL ixEthDBNullMatch(void *reference, void *entry) ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, "DB: (Search) The NullMatch function was called, wrong key type?\n", 0, 0, 0, 0, 0, 0); - return FALSE; + return false; } /** diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c index 6d9fd6ec18..029f7ac93c 100644 --- a/drivers/net/npe/IxEthDBSpanningTree.c +++ b/drivers/net/npe/IxEthDBSpanningTree.c @@ -49,7 +49,7 @@ * @brief sets the STP blocking state of a port * * @param portID ID of the port - * @param blocked TRUE to block the port or FALSE to unblock it + * @param blocked true to block the port or false to unblock it * * Note that this function is documented in the main component * header file, IxEthDB.h. diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c index e708bf1bce..24acc246b7 100644 --- a/drivers/net/npe/IxEthDBUtil.c +++ b/drivers/net/npe/IxEthDBUtil.c @@ -94,13 +94,13 @@ BOOL ixEthDBCheckSingleBitValue(UINT32 value) while (value != 0) { - if (value == 1) return TRUE; - else if ((value & 1) == 1) return FALSE; + if (value == 1) return true; + else if ((value & 1) == 1) return false; value >>= 1; } - return FALSE; + return false; #endif } diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c index e2efb9b339..522a30b1dd 100644 --- a/drivers/net/npe/IxEthDBVlan.c +++ b/drivers/net/npe/IxEthDBVlan.c @@ -642,7 +642,7 @@ IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet * * @param portID ID of the port * @param vlanID VLAN ID to enable or disable Egress tagging on - * @param enabled TRUE to enable and FALSE to disable tagging + * @param enabled true to enable and false to disable tagging * * Note that this function is documented in the main component * header file, IxEthDB.h. @@ -670,7 +670,7 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEt * @param portID ID of the port * @param vlanID VLAN ID to retrieve the tagging status for * @param enabled location to store the tagging status - * (TRUE - tagging enabled, FALSE - tagging disabled) + * (true - tagging enabled, false - tagging disabled) * * Note that this function is documented in the main component * header file, IxEthDB.h. @@ -702,7 +702,7 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEt * @param portID ID of the port * @param vlanIDMin start of VLAN range * @param vlanIDMax end of VLAN range - * @param enabled TRUE to enable or FALSE to disable VLAN tagging + * @param enabled true to enable or false to disable VLAN tagging * * Note that this function is documented in the main component * header file, IxEthDB.h. @@ -1151,7 +1151,7 @@ IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriori * from the VLAN TPID field * * @param portID ID of the port - * @param enable TRUE to enable or FALSE to disable + * @param enable true to enable or false to disable * * Note that this function is documented in the main component * header file, IxEthDB.h. diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c index 4d92f17eef..f8b439d9da 100644 --- a/drivers/net/npe/IxEthMii.c +++ b/drivers/net/npe/IxEthMii.c @@ -65,7 +65,7 @@ PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR]; * Scan for PHYs on the MII bus. This function returns * an array of booleans, one for each PHY address. * If a PHY is found at a particular address, the - * corresponding entry in the array is set to TRUE. + * corresponding entry in the array is set to true. * */ @@ -89,7 +89,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) i<IXP425_ETH_ACC_MII_MAX_ADDR; i++) { - phyPresent[i] = FALSE; + phyPresent[i] = false; } /* iterate through the PHY addresses */ @@ -119,7 +119,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) ) { /* supported phy */ - phyPresent[i] = TRUE; + phyPresent[i] = true; } /* end of if(ixEthMiiPhyId) */ else { @@ -131,7 +131,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) "ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n", ixEthMiiPhyId[i], 2, 3, 4, 5, 6); ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID; - phyPresent[i] = TRUE; + phyPresent[i] = true; } } } @@ -347,10 +347,10 @@ ixEthMiiLinkStatus(UINT32 phyAddr, return IX_FAIL; } - *linkUp = FALSE; - *speed100 = FALSE; - *fullDuplex = FALSE; - *autoneg = FALSE; + *linkUp = false; + *speed100 = false; + *fullDuplex = false; + *autoneg = false; if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID)) @@ -406,20 +406,20 @@ ixEthMiiLinkStatus(UINT32 phyAddr, if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0) { /* 100 Base X full dplx */ - *speed100 = TRUE; - *fullDuplex = TRUE; + *speed100 = true; + *fullDuplex = true; return IX_SUCCESS; } if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0) { /* 100 Base X half dplx */ - *speed100 = TRUE; + *speed100 = true; return IX_SUCCESS; } if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0) { /* 10 mb full dplx */ - *fullDuplex = TRUE; + *fullDuplex = true; return IX_SUCCESS; } if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0) diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c index 2e196a19aa..b6728e4a44 100644 --- a/drivers/net/npe/IxFeatureCtrl.c +++ b/drivers/net/npe/IxFeatureCtrl.c @@ -72,7 +72,7 @@ IX_OSAL_WRITE_LONG(ixFeatureCtrlRegister, (value)); \ /* Boolean to mark the fact that the EXP_CONFIG address space was mapped */ -PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = FALSE; +PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = false; /* Pointer holding the virtual address of the Feature Control Register */ PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL; @@ -81,7 +81,7 @@ PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL; PRIVATE BOOL swConfiguration[IX_FEATURECTRL_SWCONFIG_MAX]; /* Flag to control swConfiguration[] is initialized once */ -PRIVATE BOOL swConfigurationFlag = FALSE ; +PRIVATE BOOL swConfigurationFlag = false ; /* Array containing component mask values */ #ifdef __ixp42X @@ -158,7 +158,7 @@ void ixFeatureCtrlExpMap(void) /* If the EXP Configuration space has already been mapped then * return */ - if (ixFeatureCtrlExpCfgRegionMapped == TRUE) + if (ixFeatureCtrlExpCfgRegionMapped == true) { return; } @@ -176,7 +176,7 @@ void ixFeatureCtrlExpMap(void) (VUINT32 *) (expCfgBaseAddress + IX_FEATURE_CTRL_REG_OFFSET); /* Mark the fact that the EXP_CONFIG space has already been mapped */ - ixFeatureCtrlExpCfgRegionMapped = TRUE; + ixFeatureCtrlExpCfgRegionMapped = true; } /** @@ -186,15 +186,15 @@ void ixFeatureCtrlExpMap(void) PRIVATE void ixFeatureCtrlSwConfigurationInit(void) { UINT32 i; - if (FALSE == swConfigurationFlag) + if (false == swConfigurationFlag) { for (i=0; i<IX_FEATURECTRL_SWCONFIG_MAX ; i++) { /* By default, all software configuration are enabled */ - swConfiguration[i]= TRUE ; + swConfiguration[i]= true ; } /*Make sure this function only initializes swConfiguration[] once*/ - swConfigurationFlag = TRUE ; + swConfigurationFlag = true ; } } @@ -326,7 +326,7 @@ ixFeatureCtrlProductIdRead () extern IxFeatureCtrlProductId AsmixFeatureCtrlProductIdRead(); #ifndef IN_KERNEL - mode = SetKMode(TRUE); + mode = SetKMode(true); #endif pdId = AsmixFeatureCtrlProductIdRead(); #ifndef IN_KERNEL @@ -372,7 +372,7 @@ ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) ixFeatureCtrlSwConfigurationInit(); /* Check and return software configuration */ - return ((swConfiguration[(UINT32)swConfigType] == TRUE) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED); + return ((swConfiguration[(UINT32)swConfigType] == true) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED); } /** diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c index 3738337538..bfeac87790 100644 --- a/drivers/net/npe/IxNpeDl.c +++ b/drivers/net/npe/IxNpeDl.c @@ -89,9 +89,9 @@ typedef struct */ static IxNpeDlNpeState ixNpeDlNpeState[IX_NPEDL_NPEID_MAX] = { - {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, - {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, - {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}} + {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, + {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, + {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}} }; static IxNpeDlStats ixNpeDlStats; @@ -99,7 +99,7 @@ static IxNpeDlStats ixNpeDlStats; /* * Software guard to prevent NPE from being started multiple times. */ -static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={FALSE, FALSE, FALSE} ; +static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={false, false, false} ; /* @@ -195,7 +195,7 @@ ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, if (IX_SUCCESS == status) { ixNpeDlNpeState[npeId].imageId = *imageIdPtr; - ixNpeDlNpeState[npeId].validImage = TRUE; + ixNpeDlNpeState[npeId].validImage = true; ixNpeDlStats.successfulDownloads++; status = ixNpeDlNpeExecutionStart (npeId); @@ -204,7 +204,7 @@ ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) { ixNpeDlNpeState[npeId].imageId = *imageIdPtr; - ixNpeDlNpeState[npeId].validImage = FALSE; + ixNpeDlNpeState[npeId].validImage = false; ixNpeDlStats.criticalFailDownloads++; } } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */ @@ -507,7 +507,7 @@ ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId) if (IX_SUCCESS == status) { /* Indicate NPE has been stopped */ - ixNpeDlNpeStarted[npeId] = FALSE ; + ixNpeDlNpeStarted[npeId] = false ; } return status; @@ -573,7 +573,7 @@ ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ } /* end of if not IXP42x-A0 Silicon */ - if (TRUE == ixNpeDlNpeStarted[npeId]) + if (true == ixNpeDlNpeStarted[npeId]) { /* NPE has been started. */ return IX_SUCCESS ; @@ -588,7 +588,7 @@ ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) if (IX_SUCCESS == status) { /* Indicate NPE has started */ - ixNpeDlNpeStarted[npeId] = TRUE ; + ixNpeDlNpeStarted[npeId] = true ; } IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, @@ -674,7 +674,7 @@ ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId) if (IX_SUCCESS == status) { /* Indicate NPE has been stopped */ - ixNpeDlNpeStarted[npeId] = FALSE ; + ixNpeDlNpeStarted[npeId] = false ; } return status; @@ -840,10 +840,10 @@ ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, * currently loaded images. If a critical error occured * during download, record that the NPE has an invalid image */ - status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, TRUE); + status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, true); if (IX_SUCCESS == status) { - ixNpeDlNpeState[npeId].validImage = TRUE; + ixNpeDlNpeState[npeId].validImage = true; ixNpeDlStats.successfulDownloads++; status = ixNpeDlNpeExecutionStart (npeId); @@ -851,7 +851,7 @@ ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) || (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) { - ixNpeDlNpeState[npeId].validImage = FALSE; + ixNpeDlNpeState[npeId].validImage = false; ixNpeDlStats.criticalFailDownloads++; } diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c index 9bcdc9c0d8..0484483882 100644 --- a/drivers/net/npe/IxNpeDlImageMgr.c +++ b/drivers/net/npe/IxNpeDlImageMgr.c @@ -414,11 +414,11 @@ ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary) { IxNpeDlImageMgrImageLibraryHeader *header = (IxNpeDlImageMgrImageLibraryHeader *) microCodeImageLibrary; - BOOL result = TRUE; + BOOL result = true; if (!header || header->signature != IX_NPEDL_IMAGEMGR_SIGNATURE) { - result = FALSE; + result = false; ixNpeDlImageMgrStats.invalidSignature++; } @@ -469,11 +469,11 @@ ixNpeDlImageMgrImageIdCompare ( (imageIdA->major == imageIdB->major) && (imageIdA->minor == imageIdB->minor)) { - return TRUE; + return true; } else { - return FALSE; + return false; } } @@ -491,11 +491,11 @@ ixNpeDlImageMgrNpeFunctionIdCompare ( if ((imageIdA->npeId == imageIdB->npeId) && (imageIdA->functionalityId == imageIdB->functionalityId)) { - return TRUE; + return true; } else { - return FALSE; + return false; } } @@ -550,7 +550,7 @@ ixNpeDlImageMgrImageFind_legacy ( UINT32 imageCount = 0; IX_STATUS status = IX_FAIL; IxNpeDlImageMgrImageLibraryHeader *header; - BOOL imageFound = FALSE; + BOOL imageFound = false; IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, "Entering ixNpeDlImageMgrImageFind\n"); @@ -584,7 +584,7 @@ ixNpeDlImageMgrImageFind_legacy ( /* get the image size */ *imageSize = header->entry[imageCount].image.size; status = IX_SUCCESS; - imageFound = TRUE; + imageFound = true; } imageCount++; } diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c index a9ea8bc103..aaffeeb0cc 100644 --- a/drivers/net/npe/IxNpeDlNpeMgr.c +++ b/drivers/net/npe/IxNpeDlNpeMgr.c @@ -229,7 +229,7 @@ static IxNpeDlEcsRegResetValue ixNpeDlEcsRegResetValues[] = static IxNpeDlNpeMgrStats ixNpeDlNpeMgrStats; /* Set when NPE register memory has been mapped */ -static BOOL ixNpeDlMemInitialised = FALSE; +static BOOL ixNpeDlMemInitialised = false; /* @@ -290,7 +290,7 @@ ixNpeDlNpeMgrInit (void) IX_OSAL_ASSERT(virtAddr); ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = virtAddr; - ixNpeDlMemInitialised = TRUE; + ixNpeDlMemInitialised = true; } } @@ -314,7 +314,7 @@ ixNpeDlNpeMgrUninit (void) ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = 0; ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = 0; - ixNpeDlMemInitialised = FALSE; + ixNpeDlMemInitialised = false; return IX_SUCCESS; } @@ -662,7 +662,7 @@ ixNpeDlNpeMgrNpeReset ( { /* for each physical register in the NPE reg file, write 0 : */ status = ixNpeDlNpeMgrPhysicalRegWrite (npeBaseAddress, regAddr, - 0, TRUE); + 0, true); if (status != IX_SUCCESS) { return status; /* abort reset */ @@ -684,7 +684,7 @@ ixNpeDlNpeMgrNpeReset ( { regVal = ixNpeDlCtxtRegResetValues[ctxtReg]; status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, - ctxtReg, regVal, TRUE); + ctxtReg, regVal, true); if (status != IX_SUCCESS) { return status; /* abort reset */ diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c index 8703def8bc..2870ff7da5 100644 --- a/drivers/net/npe/IxNpeMh.c +++ b/drivers/net/npe/IxNpeMh.c @@ -79,7 +79,7 @@ * static variables. */ -PRIVATE BOOL ixNpeMhInitialized = FALSE; +PRIVATE BOOL ixNpeMhInitialized = false; /* * Extern function prototypes. @@ -128,7 +128,7 @@ PUBLIC IX_STATUS ixNpeMhInitialize ( */ ixNpeMhConfigInitialize (npeInterrupts); - ixNpeMhInitialized = TRUE; + ixNpeMhInitialized = true; IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " "ixNpeMhInitialize\n"); @@ -153,7 +153,7 @@ PUBLIC IX_STATUS ixNpeMhUnload (void) /* Uninitialize the Configuration module */ ixNpeMhConfigUninit (); - ixNpeMhInitialized = FALSE; + ixNpeMhInitialized = false; IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " "ixNpeMhUnload\n"); diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c index 50c8f21138..092d480c65 100644 --- a/drivers/net/npe/IxNpeMhConfig.c +++ b/drivers/net/npe/IxNpeMhConfig.c @@ -105,7 +105,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = 0, 0, NULL, - FALSE + false }, { 0, @@ -116,7 +116,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = 0, 0, NULL, - FALSE + false }, { 0, @@ -127,7 +127,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = 0, 0, NULL, - FALSE + false } }; diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c index 318913ac84..27bc9b730c 100644 --- a/drivers/net/npe/IxNpeMhSend.c +++ b/drivers/net/npe/IxNpeMhSend.c @@ -124,7 +124,7 @@ BOOL ixNpeMhSendInFifoIsFull( IxNpeMhNpeId npeId, UINT32 maxSendRetries) { - BOOL isFull = FALSE; + BOOL isFull = false; UINT32 numRetries = 0; /* check the NPE's inFIFO */ diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c index 443aefd4fc..672bec1189 100644 --- a/drivers/net/npe/IxOsalOsSemaphore.c +++ b/drivers/net/npe/IxOsalOsSemaphore.c @@ -135,10 +135,10 @@ static void drv_mutex_destroy(IxOsalMutex *mutex) static int drv_mutex_trylock(IxOsalMutex *mutex) { - int result = TRUE; + int result = true; if (*mutex == 1) - result = FALSE; + result = false; return result; } diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c index 9cb143998d..25a3e8539e 100644 --- a/drivers/net/npe/IxQMgrDispatcher.c +++ b/drivers/net/npe/IxQMgrDispatcher.c @@ -160,7 +160,7 @@ static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES]; /* * This flag indicates to the dispatcher that the priority table needs to be rebuilt. */ -static BOOL rebuildTable = FALSE; +static BOOL rebuildTable = false; /* Dispatcher statistics */ static IxQMgrDispatcherStats dispatcherStats; @@ -197,7 +197,7 @@ ixQMgrDispatcherInit (void) int i; IxFeatureCtrlProductId productId = 0; IxFeatureCtrlDeviceId deviceId = 0; - BOOL stickyIntSilicon = TRUE; + BOOL stickyIntSilicon = true; /* Set default priorities */ for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++) @@ -226,7 +226,7 @@ ixQMgrDispatcherInit (void) dispatcherStats.queueStats[i].priorityChangeCnt = 0; dispatcherStats.queueStats[i].intNoCallbackCnt = 0; dispatcherStats.queueStats[i].intLostCallbackCnt = 0; - dispatcherStats.queueStats[i].notificationEnabled = FALSE; + dispatcherStats.queueStats[i].notificationEnabled = false; dispatcherStats.queueStats[i].srcSel = 0; } @@ -258,7 +258,7 @@ ixQMgrDispatcherInit (void) (IX_FEATURE_CTRL_SILICON_TYPE_A0 == (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) { - stickyIntSilicon = FALSE; + stickyIntSilicon = false; } /* @@ -293,7 +293,7 @@ ixQMgrDispatcherPrioritySet (IxQMgrQId qId, /* Change priority */ dispatchQInfo[qId].priority = priority; /* Set flag */ - rebuildTable = TRUE; + rebuildTable = true; ixOsalIrqUnlock(ixQMgrLockKey); @@ -364,7 +364,7 @@ ixQMgrNotificationEnable (IxQMgrQId qId, #endif #ifndef NDEBUG - dispatcherStats.queueStats[qId].notificationEnabled = TRUE; + dispatcherStats.queueStats[qId].notificationEnabled = true; dispatcherStats.queueStats[qId].srcSel = srcSel; #endif @@ -428,7 +428,7 @@ ixQMgrNotificationDisable (IxQMgrQId qId) * so need critical section */ #ifndef NDEBUG - dispatcherStats.queueStats[qId].notificationEnabled = FALSE; + dispatcherStats.queueStats[qId].notificationEnabled = false; #endif ixQMgrLockKey = ixOsalIrqLock(); @@ -593,7 +593,7 @@ ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) qIndex += IX_QMGR_MIN_QUEUPP_QID; } - if (statusChangeFlag == FALSE) + if (statusChangeFlag == false) { /* check if the interrupt register contains * only 1 bit set (happy day scenario) @@ -800,7 +800,7 @@ ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) * For example: * intRegVal = 0x0010 * currDispatchQInfo->intRegCheckMask = 0x0010 - * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + * intRegVal == currDispatchQInfo->intRegCheckMask is true. */ currDispatchQInfo = &dispatchQInfo[qIndex]; if (intRegVal == currDispatchQInfo->intRegCheckMask) @@ -955,7 +955,7 @@ ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) * For example: * intRegVal = 0x0010 * currDispatchQInfo->intRegCheckMask = 0x0010 - * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + * intRegVal == currDispatchQInfo->intRegCheckMask is true. */ currDispatchQInfo = &dispatchQInfo[qIndex]; if (intRegVal == currDispatchQInfo->intRegCheckMask) @@ -1118,7 +1118,7 @@ ixQMgrDispatcherReBuildPriorityTable (void) int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; /* Reset the rebuild flag */ - rebuildTable = FALSE; + rebuildTable = false; /* initialize the mak used to identify the queues in the first half * of the priority table @@ -1266,7 +1266,7 @@ ixQMgrPeriodicDone (void) * Update statistics */ dispatcherStats.queueStats[i].enableCount++; - dispatcherStats.queueStats[i].notificationEnabled = TRUE; + dispatcherStats.queueStats[i].notificationEnabled = true; #endif } } diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c index b00c22d08e..61ca96c977 100644 --- a/drivers/net/npe/IxQMgrInit.c +++ b/drivers/net/npe/IxQMgrInit.c @@ -66,7 +66,7 @@ * Set to true if initialized * N.B. global so integration/unit tests can reinitialize */ -BOOL qMgrIsInitialized = FALSE; +BOOL qMgrIsInitialized = false; /* * Function definitions. @@ -90,7 +90,7 @@ ixQMgrInit (void) ixQMgrQAccessInit (); /* Initialization complete */ - qMgrIsInitialized = TRUE; + qMgrIsInitialized = true; return IX_SUCCESS; } @@ -107,7 +107,7 @@ ixQMgrUnload (void) ixQMgrQCfgUninit (); /* Uninitialization complete */ - qMgrIsInitialized = FALSE; + qMgrIsInitialized = false; return IX_SUCCESS; } diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c index ec7d837c38..26ec327a8e 100644 --- a/drivers/net/npe/IxQMgrQCfg.c +++ b/drivers/net/npe/IxQMgrQCfg.c @@ -94,7 +94,7 @@ typedef struct char qName[IX_QMGR_MAX_QNAME_LEN+1]; /* Textual description of a queue*/ IxQMgrQSizeInWords qSizeInWords; /* The number of words in the queue */ IxQMgrQEntrySizeInWords qEntrySizeInWords; /* Number of words per queue entry*/ - BOOL isConfigured; /* This flag is TRUE if the queue has + BOOL isConfigured; /* This flag is true if the queue has * been configured */ } IxQMgrCfgQ; @@ -120,7 +120,7 @@ static UINT32 freeSramAddress=0; /* 4 words of zeroed memory for inline access */ static UINT32 zeroedPlaceHolder[4] = { 0, 0, 0, 0 }; -static BOOL cfgInitialized = FALSE; +static BOOL cfgInitialized = false; static IxOsalMutex ixQMgrQCfgMutex; @@ -177,10 +177,10 @@ ixQMgrQCfgInit (void) strcpy (cfgQueueInfo[loopIndex].qName, ""); cfgQueueInfo[loopIndex].qSizeInWords = 0; cfgQueueInfo[loopIndex].qEntrySizeInWords = 0; - cfgQueueInfo[loopIndex].isConfigured = FALSE; + cfgQueueInfo[loopIndex].isConfigured = false; /* Statistics */ - stats.qStats[loopIndex].isConfigured = FALSE; + stats.qStats[loopIndex].isConfigured = false; stats.qStats[loopIndex].qName = cfgQueueInfo[loopIndex].qName; } @@ -191,13 +191,13 @@ ixQMgrQCfgInit (void) ixOsalMutexInit(&ixQMgrQCfgMutex); - cfgInitialized = TRUE; + cfgInitialized = true; } void ixQMgrQCfgUninit (void) { - cfgInitialized = FALSE; + cfgInitialized = false; /* Uninitialise the AqmIf component */ ixQMgrAqmIfUninit (); @@ -281,13 +281,13 @@ ixQMgrQConfig (char *qName, IX_QMGR_QUE_BUFFER_SPACE_SIZE); /* The queue is now configured */ - cfgQueueInfo[qId].isConfigured = TRUE; + cfgQueueInfo[qId].isConfigured = true; ixOsalMutexUnlock(&ixQMgrQCfgMutex); #ifndef NDEBUG /* Update statistics */ - stats.qStats[qId].isConfigured = TRUE; + stats.qStats[qId].isConfigured = true; stats.qStats[qId].qName = cfgQueueInfo[qId].qName; #endif return IX_SUCCESS; @@ -417,7 +417,7 @@ ixQMgrQIsConfigured (IxQMgrQId qId) { if (!IX_QMGR_QID_IS_VALID(qId)) { - return FALSE; + return false; } return cfgQueueInfo[qId].isConfigured; @@ -487,7 +487,7 @@ watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level) case IX_QMGR_Q_WM_LEVEL64: break; default: - return FALSE; + return false; } /* Check watermark is not bigger than the qSizeInEntries */ @@ -495,10 +495,10 @@ watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level) if ((unsigned)level > qSizeInEntries) { - return FALSE; + return false; } - return TRUE; + return true; } PRIVATE BOOL @@ -512,10 +512,10 @@ qSizeInWordsIsOk (IxQMgrQSizeInWords qSize) case IX_QMGR_Q_SIZE32: case IX_QMGR_Q_SIZE64: case IX_QMGR_Q_SIZE128: - status = TRUE; + status = true; break; default: - status = FALSE; + status = false; break; } @@ -532,10 +532,10 @@ qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize) case IX_QMGR_Q_ENTRY_SIZE1: case IX_QMGR_Q_ENTRY_SIZE2: case IX_QMGR_Q_ENTRY_SIZE4: - status = TRUE; + status = true; break; default: - status = FALSE; + status = false; break; } diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h index 50ef582f73..7b8734563a 100644 --- a/drivers/net/npe/include/IxAtmdAccCtrl.h +++ b/drivers/net/npe/include/IxAtmdAccCtrl.h @@ -1933,12 +1933,12 @@ PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port); * @brief disable a PHY logical port * * This function indicates if the port disable for a port has completed. This -* function will return TRUE if the port has never been enabled. +* function will return true if the port has never been enabled. * * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] * -* @return @li TRUE disable is complete -* @return @li FALSE disable failed, wrong parameter . +* @return @li true disable is complete +* @return @li false disable failed, wrong parameter . * * @note - This function needs internal locks and should not be called * from an interrupt context diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h index 4e0de8235c..eda3e303be 100644 --- a/drivers/net/npe/include/IxEthAcc_p.h +++ b/drivers/net/npe/include/IxEthAcc_p.h @@ -92,7 +92,7 @@ #define IX_ETH_ACC_PUBLIC -#define IX_ETH_ACC_IS_PORT_VALID(port) ((port) < IX_ETH_ACC_NUMBER_OF_PORTS ? TRUE : FALSE ) +#define IX_ETH_ACC_IS_PORT_VALID(port) ((port) < IX_ETH_ACC_NUMBER_OF_PORTS ? true : false ) @@ -286,7 +286,7 @@ extern IxEthAccPortDataInfo ixEthAccPortData[]; #define IX_ETH_IS_PORT_INITIALIZED(port) (ixEthAccPortData[port].portInitialized) extern BOOL ixEthAccServiceInit; -#define IX_ETH_ACC_IS_SERVICE_INITIALIZED() (ixEthAccServiceInit == TRUE ) +#define IX_ETH_ACC_IS_SERVICE_INITIALIZED() (ixEthAccServiceInit == true ) /* * Maximum number of frames to consume from the Rx Frame Q. diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h index 1189c9a140..dfdfe1ae57 100644 --- a/drivers/net/npe/include/IxEthDB.h +++ b/drivers/net/npe/include/IxEthDB.h @@ -229,7 +229,7 @@ typedef enum IX_ETH_DB_INTEGER_PROPERTY = 0x1, /**< 4 byte unsigned integer type */ IX_ETH_DB_STRING_PROPERTY = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */ IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */ - IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only TRUE and FALSE values */ + IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only true and false values */ } IxEthDBPropertyType; /* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */ @@ -1427,8 +1427,8 @@ IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriori * * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames - * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN, and - * FALSE to disable Egress VLAN tagging + * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN, and + * false to disable Egress VLAN tagging * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier @@ -1450,8 +1450,8 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEt * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from * @param vlanID VLAN [in] - ID whose tagging status is to be extracted * @param enabled [in] - user-specifed location where the status is copied to; following - * the successfull execution of this function the value will be TRUE if Egress VLAN - * tagging is enabled for the given port and VLAN ID, and FALSE otherwise + * the successfull execution of this function the value will be true if Egress VLAN + * tagging is enabled for the given port and VLAN ID, and false otherwise * * - Reentrant - no * - ISR Callable - no @@ -1486,8 +1486,8 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEt * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames - * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN range, - * and FALSE to disable Egress VLAN tagging + * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN range, + * and false to disable Egress VLAN tagging * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier @@ -1640,7 +1640,7 @@ IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBT * This feature is disabled by default. * * @param portID ID of the port to configure port ID extraction on - * @param enable TRUE to enable port ID extraction and FALSE to disable it + * @param enable true to enable port ID extraction and false to disable it * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier @@ -1759,7 +1759,7 @@ IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature * * * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports) * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable - * @param enabled BOOL [in] - TRUE to enable the feature and FALSE to disable it + * @param enabled BOOL [in] - true to enable the feature and false to disable it * * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level; * when such features are set to <i>disabled</i> using the EthDB API they will be configured in such @@ -1786,7 +1786,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, * * This function returns the availability and status for a feature set. * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING) - * the "present" and "enabled" return values will be set to TRUE only if all the features in the + * the "present" and "enabled" return values will be set to true only if all the features in the * feature set are present and enabled (not only some). * * @param portID @ref IxEthDBPortId [in] - ID of the port @@ -1873,7 +1873,7 @@ IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature fea * - IX_ETH_DB_INTEGER_PROPERTY - 4 bytes are copied from the source location * - IX_ETH_DB_STRING_PROPERTY - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters * - IX_ETH_DB_MAC_ADDR_PROPERTY - 6 bytes are copied from the source location - * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are TRUE (1L) and false (0L) + * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are true (1L) and false (0L) * * @see ixEthDBFeaturePropertySet * @@ -2134,7 +2134,7 @@ IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid); * @brief Sets the STP blocked/unblocked state for a port * * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param blocked BOOL [in] - TRUE to set the port as STP blocked, FALSE to set it as unblocked + * @param blocked BOOL [in] - true to set the port as STP blocked, false to set it as unblocked * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier @@ -2153,7 +2153,7 @@ IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blo * @brief Retrieves the STP blocked/unblocked state for a port * * @param portID @ref IxEthDBPortId [in] - ID of the port - * @param blocked BOOL * [in] - set to TRUE if the port is STP blocked, FALSE otherwise + * @param blocked BOOL * [in] - set to true if the port is STP blocked, false otherwise * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier @@ -2214,7 +2214,7 @@ IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode m * NPE image. * * @param portID ID of the port - * @param enable TRUE to enable invalid MAC address filtering and FALSE to disable it + * @param enable true to enable invalid MAC address filtering and false to disable it * * @retval IX_ETH_DB_SUCCESS operation completed successfully * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h index ccec7ea7be..d173d12082 100644 --- a/drivers/net/npe/include/IxEthDB_p.h +++ b/drivers/net/npe/include/IxEthDB_p.h @@ -169,9 +169,9 @@ extern int overflowEvent; #define TREE_POOL_SIZE (4000) /**< number of MacTreeNode objects; each entry has 16 bytes */ /* retry policies */ -#define BUSY_RETRY_ENABLED (TRUE) /**< if set to TRUE the API will retry automatically calls returning BUSY */ -#define FOREVER_RETRY (TRUE) /**< if set to TRUE the API will retry forever BUSY calls */ -#define MAX_RETRIES (400) /**< upper retry limit - used only when FOREVER_RETRY is FALSE */ +#define BUSY_RETRY_ENABLED (true) /**< if set to true the API will retry automatically calls returning BUSY */ +#define FOREVER_RETRY (true) /**< if set to true the API will retry forever BUSY calls */ +#define MAX_RETRIES (400) /**< upper retry limit - used only when FOREVER_RETRY is false */ #define BUSY_RETRY_YIELD (5) /**< ticks to yield for every failed retry */ /* event management */ @@ -179,8 +179,8 @@ extern int overflowEvent; #define EVENT_PROCESSING_LIMIT (100) /**< batch processing control size (how many events are extracted from the queue at once) */ /* MAC descriptors */ -#define STATIC_ENTRY (TRUE) -#define DYNAMIC_ENTRY (FALSE) +#define STATIC_ENTRY (true) +#define DYNAMIC_ENTRY (false) /* age reset on next maintenance - incrementing by 1 will reset to 0 */ #define AGE_RESET (0xFFFFFFFF) @@ -270,7 +270,7 @@ extern int overflowEvent; /* gives an empty dependency map */ #define SET_EMPTY_DEPENDENCY_MAP(map) { int i = 0; for (; i < 32 ; i++) map[i] = 0; } -#define IS_EMPTY_DEPENDENCY_MAP(result, map) { int i = 0 ; result = TRUE; for (; i < 32 ; i++) if (map[i] != 0) { result = FALSE; break; }} +#define IS_EMPTY_DEPENDENCY_MAP(result, map) { int i = 0 ; result = true; for (; i < 32 ; i++) if (map[i] != 0) { result = false; break; }} /** * gives a map consisting only of 'portID' @@ -293,12 +293,12 @@ extern int overflowEvent; #define EXCLUDE_PORT_FROM_MAP(map, portID) { map[portID >> 3] &= ~(1 << (portID & 0x7); } /** - * returns TRUE if map1 is a subset of map2 and FALSE otherwise + * returns true if map1 is a subset of map2 and false otherwise */ -#define IS_MAP_SUBSET(result, map1, map2) { int i = 0; result = TRUE; for (; i < 32 ; i++) if ((map1[i] | map2[i]) != map2[i]) result = FALSE; } +#define IS_MAP_SUBSET(result, map1, map2) { int i = 0; result = true; for (; i < 32 ; i++) if ((map1[i] | map2[i]) != map2[i]) result = false; } /** - * returns TRUE is portID is part of map and FALSE otherwise + * returns true is portID is part of map and false otherwise */ #define IS_PORT_INCLUDED(portID, map) ((map[portID >> 3] & (1 << (portID & 0x7))) != 0) @@ -308,9 +308,9 @@ extern int overflowEvent; #define DIFF_MAPS(map, map1, map2) { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] ^ (map1[i] & map2[i]); } /** - * returns TRUE if the maps collide (have at least one port in common) and FALSE otherwise + * returns true if the maps collide (have at least one port in common) and false otherwise */ -#define MAPS_COLLIDE(result, map1, map2) { int i = 0; result = FALSE; for (; i < 32 ; i++) if ((map1[i] & map2[i]) != 0) result = TRUE; } +#define MAPS_COLLIDE(result, map1, map2) { int i = 0; result = false; for (; i < 32 ; i++) if ((map1[i] & map2[i]) != 0) result = true; } /* size (number of ports) of a dependency map */ #define GET_MAP_SIZE(map, size) { int i = 0, b = 0; size = 0; for (; i < 32 ; i++) { char y = map[i]; for (; b < 8 && (y >>= 1); b++) size += (y & 1); }} @@ -415,7 +415,7 @@ typedef union struct { UINT32 age; - BOOL staticEntry; /**< TRUE if this address is static (doesn't age) */ + BOOL staticEntry; /**< true if this address is static (doesn't age) */ } filteringData; struct @@ -492,26 +492,26 @@ typedef void (*IxEthDBNoteWriteFn)(void *address, MacTreeNode *node); typedef struct { - BOOL updateEnabled; /**< TRUE if updates are enabled for port */ - BOOL userControlled; /**< TRUE if the user has manually used ixEthDBPortUpdateEnableSet */ - BOOL treeInitialized; /**< TRUE if the NPE has received an initial tree */ + BOOL updateEnabled; /**< true if updates are enabled for port */ + BOOL userControlled; /**< true if the user has manually used ixEthDBPortUpdateEnableSet */ + BOOL treeInitialized; /**< true if the NPE has received an initial tree */ IxEthDBPortUpdateHandler updateHandler; /**< port update handler routine */ void *npeUpdateZone; /**< port update memory zone */ void *npeGwUpdateZone; /**< port update memory zone for gateways */ void *vlanUpdateZone; /**< port update memory zone for VLAN tables */ MacTreeNode *searchTree; /**< internal search tree, in MacTreeNode representation */ - BOOL searchTreePendingWrite; /**< TRUE if searchTree holds a tree pending write to the port */ + BOOL searchTreePendingWrite; /**< true if searchTree holds a tree pending write to the port */ } PortUpdateMethod; typedef struct { IxEthDBPortId portID; /**< port ID */ - BOOL enabled; /**< TRUE if the port is enabled */ - BOOL agingEnabled; /**< TRUE if aging on this port is enabled */ + BOOL enabled; /**< true if the port is enabled */ + BOOL agingEnabled; /**< true if aging on this port is enabled */ BOOL initialized; IxEthDBPortMap dependencyPortMap; /**< dependency port map for this port */ PortUpdateMethod updateMethod; /**< update method structure */ - BOOL macAddressUploaded; /**< TRUE if the MAC address was uploaded into the port */ + BOOL macAddressUploaded; /**< true if the MAC address was uploaded into the port */ UINT32 maxRxFrameSize; /**< maximum Rx frame size for this port */ UINT32 maxTxFrameSize; /**< maximum Rx frame size for this port */ diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h index 397253a947..93d3b790b2 100644 --- a/drivers/net/npe/include/IxEthMii.h +++ b/drivers/net/npe/include/IxEthMii.h @@ -83,7 +83,7 @@ * * @brief Scan the MDIO bus for PHYs * This function scans PHY addresses 0 through 31, and sets phyPresent[n] to - * TRUE if a phy is discovered at address n. + * true if a phy is discovered at address n. * * - Reentrant - no * - ISR Callable - no @@ -120,9 +120,9 @@ PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount); * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. * * @param phyAddr UINT32 [in] - * @param speed100 BOOL [in] - set to TRUE for 100Mbit/s operation, FALSE for 10Mbit/s - * @param fullDuplex BOOL [in] - set to TRUE for Full Duplex, FALSE for Half Duplex - * @param autonegotiate BOOL [in] - set to TRUE to enable autonegotiation + * @param speed100 BOOL [in] - set to true for 100Mbit/s operation, false for 10Mbit/s + * @param fullDuplex BOOL [in] - set to true for Full Duplex, false for Half Duplex + * @param autonegotiate BOOL [in] - set to true to enable autonegotiation * * @return IX_STATUS * - IX_SUCCESS @@ -223,10 +223,10 @@ PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr); * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. * * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) - * @param linkUp BOOL [out] - set to TRUE if the link is up - * @param speed100 BOOL [out] - set to TRUE indicates 100Mbit/s, FALSE indicates 10Mbit/s - * @param fullDuplex BOOL [out] - set to TRUE indicates Full Duplex, FALSE indicates Half Duplex - * @param autoneg BOOL [out] - set to TRUE indicates autonegotiation is enabled, FALSE indicates autonegotiation is disabled + * @param linkUp BOOL [out] - set to true if the link is up + * @param speed100 BOOL [out] - set to true indicates 100Mbit/s, false indicates 10Mbit/s + * @param fullDuplex BOOL [out] - set to true indicates Full Duplex, false indicates Half Duplex + * @param autoneg BOOL [out] - set to true indicates autonegotiation is enabled, false indicates autonegotiation is disabled * * @return IX_STATUS * - IX_SUCCESS diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h index dabc38e25e..1662a00139 100644 --- a/drivers/net/npe/include/IxFeatureCtrl.h +++ b/drivers/net/npe/include/IxFeatureCtrl.h @@ -706,14 +706,14 @@ ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType); * @brief This function enable/disable the specified software configuration. * * Usage Example:<br> - * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, TRUE) is used + * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, true) is used * to enable Ethernet Learning Feature <br> - * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, FALSE) is used + * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false) is used * to disable Ethernet Learning Feature <br> * * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration * defined in IxFeatureCtrlSwConfig enumeration. - * @param enabled BOOL [in] - To enable(TRUE) / disable (FALSE) the specified software + * @param enabled BOOL [in] - To enable(true) / disable (false) the specified software * configuration. * * @return none diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h index 07bb119b0b..52d5716f72 100644 --- a/drivers/net/npe/include/IxHssAcc.h +++ b/drivers/net/npe/include/IxHssAcc.h @@ -583,12 +583,12 @@ typedef struct */ typedef struct { - BOOL hdlc56kMode; /**< 56kbps(TRUE)/64kbps(FALSE) HDLC */ + BOOL hdlc56kMode; /**< 56kbps(true)/64kbps(false) HDLC */ IxHssAcc56kEndianness hdlc56kEndian; /**< 56kbps data endianness - - ignored if hdlc56kMode is FALSE*/ - BOOL hdlc56kUnusedBitPolarity0; /**< The polarity '0'(TRUE)/'1'(FALSE) of the unused + - ignored if hdlc56kMode is false*/ + BOOL hdlc56kUnusedBitPolarity0; /**< The polarity '0'(true)/'1'(false) of the unused bit while in 56kbps mode - - ignored if hdlc56kMode is FALSE*/ + - ignored if hdlc56kMode is false*/ } IxHssAccHdlcMode; /** @@ -1006,9 +1006,9 @@ ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 * * @return - * - TRUE The state of this HSS/HDLC port combination is disconnected, + * - true The state of this HSS/HDLC port combination is disconnected, * so if a disconnect was called, it is now completed. - * - FALSE The state of this HSS/HDLC port combination is connected, + * - false The state of this HSS/HDLC port combination is connected, * so if a disconnect was called, it is not yet completed. */ PUBLIC BOOL @@ -1259,7 +1259,7 @@ ixHssAccChanDisconnect (IxHssAccHssPort hssPortId); * identical ports (0-1). * @param *dataRecvd BOOL [out] - This BOOL indicates to the client whether * or not the access component has read any data for the client. If - * FALSE, the other output parameters will not have been written to. + * false, the other output parameters will not have been written to. * @param *rxOffset unsigned [out] - An offset to indicate to the client * where within the receive buffers the NPE has just written the received * data to. diff --git a/drivers/net/npe/include/IxNpeDl.h b/drivers/net/npe/include/IxNpeDl.h index 86f69f4144..f514c2e7d9 100644 --- a/drivers/net/npe/include/IxNpeDl.h +++ b/drivers/net/npe/include/IxNpeDl.h @@ -637,7 +637,7 @@ ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary); * @param imageIdPtr @ref IxNpeDlImageId* [in] - Pointer to Id of the microcode * image to download. * @param verify BOOL [in] - ON/OFF option to verify the download. If ON - * (verify == TRUE), the Downloader will read back + * (verify == true), the Downloader will read back * each word written to the NPE registers to * ensure the download operation was successful. * diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h index a752f26e88..876a438cec 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h @@ -81,7 +81,7 @@ * @param UINT32 [in] npeBaseAddress - Base Address of NPE * @param UINT32 [in] insMemAddress - NPE instruction memory address to write * @param UINT32 [in] insMemData - data to write to instruction memory - * @param BOOL [in] verify - if TRUE, verify the memory location is + * @param BOOL [in] verify - if true, verify the memory location is * written successfully. * * This function is used to write a single word of data to a location in NPE @@ -93,7 +93,7 @@ * @post * * @return - * - IX_FAIL if verify is TRUE and the memory location was not written + * - IX_FAIL if verify is true and the memory location was not written * successfully * - IX_SUCCESS otherwise */ @@ -113,7 +113,7 @@ ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress, UINT32 insMemAddress, * @param UINT32 [in] npeBaseAddress - Base Address of NPE * @param UINT32 [in] dataMemAddress - NPE data memory address to write * @param UINT32 [in] dataMemData - data to write to NPE data memory - * @param BOOL [in] verify - if TRUE, verify the memory location is + * @param BOOL [in] verify - if true, verify the memory location is * written successfully. * * This function is used to write a single word of data to a location in NPE @@ -125,7 +125,7 @@ ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress, UINT32 insMemAddress, * @post * * @return - * - IX_FAIL if verify is TRUE and the memory location was not written + * - IX_FAIL if verify is true and the memory location was not written * successfully * - IX_SUCCESS otherwise */ @@ -304,7 +304,7 @@ ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress); * @param UINT32 [in] npeBaseAddress - Base Address of NPE * @param UINT32 [in] regAddr - number of the physical register (0-31)* * @param UINT32 [in] regValue - value to write to the physical register - * @param BOOL [in] verify - if TRUE, verify the register is written + * @param BOOL [in] verify - if true, verify the register is written * successfully. * * This function writes a physical register in the NPE data register file. @@ -324,7 +324,7 @@ ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress); * a sequence of calls to this function * * @return - * - IX_FAIL if verify is TRUE and the Context Register was not written + * - IX_FAIL if verify is true and the Context Register was not written * successfully * - IX_SUCCESS if Context Register was written successfully * - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written @@ -349,7 +349,7 @@ ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, * @param IxNpeDlCtxtRegNum [in] ctxtReg - which Context Store reg to write * @param UINT32 [in] ctxtRegVal - value to write to the Context Store * register - * @param BOOL [in] verify - if TRUE, verify the register is + * @param BOOL [in] verify - if true, verify the register is * written successfully. * * This function writes the contents of a Context Store register in the NPE @@ -366,7 +366,7 @@ ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, * a sequence of calls to this function * * @return - * - IX_FAIL if verify is TRUE and the Context Register was not written + * - IX_FAIL if verify is true and the Context Register was not written * successfully * - IX_SUCCESS if Context Register was written successfully * - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h index b7fb0f0217..e25e532b16 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h @@ -126,7 +126,7 @@ IX_STATUS ixNpeDlNpeMgrUninit (void); * @param IxNpeDlNpeId [in] npeId - Id of target NPE * @param UINT32* [in] imageCodePtr - pointer to image code in image to be * downloaded - * @param BOOL [in] verify - if TRUE, verify each word written to + * @param BOOL [in] verify - if true, verify each word written to * NPE memory. * * This function loads a image containing blocks of microcode onto a diff --git a/drivers/net/npe/include/IxNpeMhConfig_p.h b/drivers/net/npe/include/IxNpeMhConfig_p.h index 375b3468e6..8c8b9ab7f0 100644 --- a/drivers/net/npe/include/IxNpeMhConfig_p.h +++ b/drivers/net/npe/include/IxNpeMhConfig_p.h @@ -110,7 +110,7 @@ typedef struct UINT32 inFifoRegister; /**< inFIFO register virutal address */ UINT32 outFifoRegister; /**< outFIFO register virtual address */ IxNpeMhConfigIsr isr; /**< isr routine for handling interrupt */ - BOOL oldInterruptState; /**< old interrupt state (TRUE => enabled) */ + BOOL oldInterruptState; /**< old interrupt state (true => enabled) */ } IxNpeMhConfigNpeInfo; @@ -250,7 +250,7 @@ void ixNpeMhConfigIsrRegister ( * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will * be enabled. * - * @return Returns the previous state of the interrupt (TRUE => enabled). + * @return Returns the previous state of the interrupt (true => enabled). */ BOOL ixNpeMhConfigNpeInterruptEnable ( @@ -265,7 +265,7 @@ BOOL ixNpeMhConfigNpeInterruptEnable ( * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will * be disabled. * - * @return Returns the previous state of the interrupt (TRUE => enabled). + * @return Returns the previous state of the interrupt (true => enabled). */ BOOL ixNpeMhConfigNpeInterruptDisable ( @@ -293,7 +293,7 @@ IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( * * @param IxNpeMhNpeId npeId (in) - the NPE ID to validate. * - * @return True if the NPE ID is valid, otherwise False. + * @return true if the NPE ID is valid, otherwise false. */ BOOL ixNpeMhConfigNpeIdIsValid ( @@ -340,7 +340,7 @@ void ixNpeMhConfigLockRelease ( * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO * will be checked. * - * @return True if the inFIFO is empty, otherwise False. + * @return true if the inFIFO is empty, otherwise false. */ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsEmpty ( @@ -355,7 +355,7 @@ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsEmpty ( * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO * will be checked. * - * @return True if the inFIFO is full, otherwise False. + * @return true if the inFIFO is full, otherwise false. */ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsFull ( @@ -370,7 +370,7 @@ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsFull ( * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO * will be checked. * - * @return True if the outFIFO is empty, otherwise False. + * @return true if the outFIFO is empty, otherwise false. */ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsEmpty ( @@ -385,7 +385,7 @@ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsEmpty ( * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO * will be checked. * - * @return True if the outFIFO is full, otherwise False. + * @return true if the outFIFO is full, otherwise false. */ IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsFull ( diff --git a/drivers/net/npe/include/IxOsal.h b/drivers/net/npe/include/IxOsal.h index 4ca2e45f60..28c44af327 100644 --- a/drivers/net/npe/include/IxOsal.h +++ b/drivers/net/npe/include/IxOsal.h @@ -1204,8 +1204,8 @@ PUBLIC void ixOsalTicksToTimeval (UINT32 ticks, IxOsalTimeval * pTv); * @li Reentrant: yes * @li IRQ safe: yes * - * @return - TRUE if the structures are equal - * - FALSE otherwise + * @return - true if the structures are equal + * - false otherwise * Note: This function is OS-independant */ #define IX_OSAL_TIME_EQ(tvA, tvB) \ @@ -1225,8 +1225,8 @@ PUBLIC void ixOsalTicksToTimeval (UINT32 ticks, IxOsalTimeval * pTv); * @li Reentrant: yes * @li IRQ safe: yes * - * @return - TRUE if tvA < tvB - * - FALSE otherwise + * @return - true if tvA < tvB + * - false otherwise * Note: This function is OS-independent. Implemented by core. */ #define IX_OSAL_TIME_LT(tvA,tvB) \ @@ -1247,8 +1247,8 @@ PUBLIC void ixOsalTicksToTimeval (UINT32 ticks, IxOsalTimeval * pTv); * @li Reentrant: yes * @li IRQ safe: yes * - * @return - TRUE if tvA > tvB - * - FALSE otherwise + * @return - true if tvA > tvB + * - false otherwise * Note: This function is OS-independent. */ #define IX_OSAL_TIME_GT(tvA, tvB) \ diff --git a/drivers/net/npe/include/IxOsalTypes.h b/drivers/net/npe/include/IxOsalTypes.h index a190a707e3..06e71debfb 100644 --- a/drivers/net/npe/include/IxOsalTypes.h +++ b/drivers/net/npe/include/IxOsalTypes.h @@ -107,22 +107,6 @@ typedef volatile INT32 VINT32; */ #define IX_OSAL_BILLION (1000000000) -#ifndef TRUE -#define TRUE 1L -#endif - -#if TRUE != 1 -#error TRUE is not defined to 1 -#endif - -#ifndef FALSE -#define FALSE 0L -#endif - -#if FALSE != 0 -#error FALSE is not defined to 0 -#endif - #ifndef NULL #define NULL 0L #endif diff --git a/drivers/net/npe/include/IxPerfProfAcc.h b/drivers/net/npe/include/IxPerfProfAcc.h index 65c0ba96ab..7e4527a055 100644 --- a/drivers/net/npe/include/IxPerfProfAcc.h +++ b/drivers/net/npe/include/IxPerfProfAcc.h @@ -1281,8 +1281,8 @@ ixPerfProfAccXcycleResultsGet ( * Check if Xcycle measuring task is running. * * @return - * - TRUE - Xcycle is running - * - FALSE - Xcycle is not running + * - true - Xcycle is running + * - false - Xcycle is not running * * @li Reentrant : no * @li ISR Callable : no diff --git a/drivers/net/npe/include/IxQMgrAqmIf_p.h b/drivers/net/npe/include/IxQMgrAqmIf_p.h index 4f0f64d273..b63c4a9ef8 100644 --- a/drivers/net/npe/include/IxQMgrAqmIf_p.h +++ b/drivers/net/npe/include/IxQMgrAqmIf_p.h @@ -606,10 +606,10 @@ ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords, (newQStatusWords[statusWordOffset] & mask)) && ((newQStatusWords[statusWordOffset] & mask) == checkValue)) { - return TRUE; + return true; } - return FALSE; + return false; } /* @@ -665,7 +665,7 @@ ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, /* * This inline function will read the status bit of a queue - * specified by qId. If reset is TRUE the bit is cleared. + * specified by qId. If reset is true the bit is cleared. */ IX_QMGR_AQMIF_INLINE BOOL ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, @@ -707,11 +707,11 @@ ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, { ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset)); } - return TRUE; + return true; } /* Bit not set */ - return FALSE; + return false; } @@ -733,12 +733,12 @@ ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId) IX_QMGR_QUEUOSTAT0_OFFSET, IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, IX_QMGR_UNDERFLOW_BIT_OFFSET, - TRUE/*reset*/)); + true/*reset*/)); } else { /* Qs 32-63 have no underflow status */ - return FALSE; + return false; } } @@ -755,12 +755,12 @@ ixQMgrAqmIfOverflowCheck (IxQMgrQId qId) IX_QMGR_QUEUOSTAT0_OFFSET, IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, IX_QMGR_OVERFLOW_BIT_OFFSET, - TRUE/*reset*/)); + true/*reset*/)); } else { /* Qs 32-63 have no overflow status */ - return FALSE; + return false; } } @@ -870,7 +870,7 @@ ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, IX_QMGR_QUEUPPSTAT0_OFFSET, IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, 0/*relativeBitOffset*/, - FALSE/*!reset*/)) + false/*!reset*/)) { *status |= IX_QMGR_Q_STATUS_NE_BIT_MASK; } @@ -884,7 +884,7 @@ ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, IX_QMGR_QUEUPPSTAT1_OFFSET, IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, 0/*relativeBitOffset*/, - FALSE/*!reset*/)) + false/*!reset*/)) { *status |= IX_QMGR_Q_STATUS_F_BIT_MASK; } diff --git a/drivers/net/npe/include/IxSspAcc.h b/drivers/net/npe/include/IxSspAcc.h index 35e7abf06f..61d911b9ad 100644 --- a/drivers/net/npe/include/IxSspAcc.h +++ b/drivers/net/npe/include/IxSspAcc.h @@ -898,7 +898,7 @@ ixSspAccTxFIFOIntDisable ( * * @brief Enables/disables the loopback mode * - * @param "BOOL [in] loopbackEnable" - True to enable and false to disable. + * @param "BOOL [in] loopbackEnable" - true to enable and false to disable. * * Global Data : * - None. diff --git a/drivers/net/npe/include/IxTimeSyncAcc.h b/drivers/net/npe/include/IxTimeSyncAcc.h index 25effed90b..52c4c1cfa3 100644 --- a/drivers/net/npe/include/IxTimeSyncAcc.h +++ b/drivers/net/npe/include/IxTimeSyncAcc.h @@ -497,8 +497,8 @@ ixTimeSyncAccTargetTimeInterruptDisable(void); * the Target Time in the IEEE 1588 hardware assist block. If the condition is * true an event flag is set in the hardware. * - * @param ttmPollFlag [out] - TRUE if the target time reached/hit condition event set - * FALSE if the target time reached/hit condition event is + * @param ttmPollFlag [out] - true if the target time reached/hit condition event set + * false if the target time reached/hit condition event is not set * @param targetTime [out] - Capture current targetTime into client provided buffer * @@ -656,9 +656,9 @@ ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode); * (Master or Slave) * * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked - * @param auxPollFlag [out] - TRUE if the time stamp captured in auxiliary + * @param auxPollFlag [out] - true if the time stamp captured in auxiliary snapshot register - * FALSE if the time stamp not captured in + * false if the time stamp not captured in auxiliary snapshot register * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the * client provided buffer diff --git a/drivers/net/npe/npe.c b/drivers/net/npe/npe.c index 1fe3a95eaf..6fc9f86e5f 100644 --- a/drivers/net/npe/npe.c +++ b/drivers/net/npe/npe.c @@ -322,7 +322,7 @@ static int npe_csr_load(void) } /* don't need this for U-Boot */ - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, FALSE); + ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false); if (ixEthAccInit() != IX_ETH_ACC_SUCCESS) { printf("Error initialising Ethernet access driver!\n"); @@ -647,29 +647,29 @@ int npe_initialize(bd_t * bis) */ if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_1] = TRUE; + npe_exists[IX_ETH_PORT_1] = true; if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_2] = TRUE; + npe_exists[IX_ETH_PORT_2] = true; break; case IX_FEATURE_CTRL_SILICON_TYPE_A0: /* * If it is A0 Silicon, we enable both as both Eth Coprocessors * are available. */ - npe_exists[IX_ETH_PORT_1] = TRUE; - npe_exists[IX_ETH_PORT_2] = TRUE; + npe_exists[IX_ETH_PORT_1] = true; + npe_exists[IX_ETH_PORT_2] = true; break; } } else if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X) { if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_1] = TRUE; + npe_exists[IX_ETH_PORT_1] = true; if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == IX_FEATURE_CTRL_COMPONENT_ENABLED) - npe_exists[IX_ETH_PORT_2] = TRUE; + npe_exists[IX_ETH_PORT_2] = true; } npe_used[IX_ETH_PORT_1] = 1; diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c index d61a2289f9..ec04ec8952 100644 --- a/drivers/rtc/ds1374.c +++ b/drivers/rtc/ds1374.c @@ -84,15 +84,6 @@ #define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */ #define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */ -typedef unsigned char boolean_t; - -#ifndef TRUE -#define TRUE ((boolean_t)(0==0)) -#endif -#ifndef FALSE -#define FALSE (!TRUE) -#endif - const char RtcTodAddr[] = { RTC_TOD_CNT_BYTE0_ADDR, RTC_TOD_CNT_BYTE1_ADDR, @@ -101,7 +92,7 @@ const char RtcTodAddr[] = { }; static uchar rtc_read (uchar reg); -static void rtc_write (uchar reg, uchar val, boolean_t set); +static void rtc_write(uchar reg, uchar val, bool set); static void rtc_write_raw (uchar reg, uchar val); /* @@ -185,7 +176,7 @@ int rtc_set (struct rtc_time *tmp){ } /* Start clock */ - rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE); + rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, false); return 0; } @@ -202,18 +193,18 @@ void rtc_reset (void){ struct rtc_time tmp; /* clear status flags */ - rtc_write (RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), FALSE); /* clearing OSF and AF */ + rtc_write(RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), false); /* clearing OSF and AF */ /* Initialise DS1374 oriented to MPC8349E-ADS */ rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC |RTC_CTL_BIT_WACE - |RTC_CTL_BIT_AIE), FALSE);/* start osc, disable WACE, clear AIE + |RTC_CTL_BIT_AIE), false);/* start osc, disable WACE, clear AIE - set to 0 */ rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM |RTC_CTL_BIT_WDSTR |RTC_CTL_BIT_RS1 |RTC_CTL_BIT_RS2 - |RTC_CTL_BIT_BBSQW), TRUE);/* disable WD/ALM, WDSTR set to INT-pin, + |RTC_CTL_BIT_BBSQW), true);/* disable WD/ALM, WDSTR set to INT-pin, set BBSQW and SQW to 32k - set to 1 */ tmp.tm_year = 1970; @@ -229,9 +220,9 @@ void rtc_reset (void){ tmp.tm_year, tmp.tm_mon, tmp.tm_mday, tmp.tm_hour, tmp.tm_min, tmp.tm_sec); - rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAC, TRUE); - rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR,0xDE, TRUE); - rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAD, TRUE); + rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR, 0xAC, true); + rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR, 0xDE, true); + rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR, 0xAD, true); } /* @@ -242,9 +233,9 @@ static uchar rtc_read (uchar reg) return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); } -static void rtc_write (uchar reg, uchar val, boolean_t set) +static void rtc_write(uchar reg, uchar val, bool set) { - if (set == TRUE) { + if (set == true) { val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg); i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } else { diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 148d1a6ddd..8e08153344 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -971,8 +971,8 @@ static void usbtty_event_handler (struct usb_device_instance *device, /* * is_usbd_high_speed routine needs to be defined by * specific gadget driver - * It returns TRUE if device enumerates at High speed - * Retuns FALSE otherwise + * It returns true if device enumerates at High speed + * Retuns false otherwise */ for (i = 0; i < NUM_ENDPOINTS; i++) { if (((ep_descriptor_ptrs[i]->bmAttributes & diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 8865df5bef..468d356a8b 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -455,7 +455,7 @@ static int spi_setup_offset(struct spi_trans *trans) /* * Wait for up to 6s til status register bit(s) turn 1 (in case wait_til_set - * below is True) or 0. In case the wait was for the bit(s) to set - write + * below is true) or 0. In case the wait was for the bit(s) to set - write * those bits back, which would cause resetting them. * * Return the last read status value on success or -1 on failure. diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h index 5c126ef9cf..72c8c2bad1 100644 --- a/drivers/usb/musb-new/linux-compat.h +++ b/drivers/usb/musb-new/linux-compat.h @@ -12,8 +12,6 @@ #define __iomem #define __deprecated -typedef enum { false = 0, true = 1 } bool; - struct unused {}; typedef struct unused unused_t; diff --git a/drivers/video/Makefile b/drivers/video/Makefile index e8cecca55a..53952ab07e 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -35,11 +35,12 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o +COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o +COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o COBJS-$(CONFIG_LD9040) += ld9040.o COBJS-$(CONFIG_SED156X) += sed156x.o -COBJS-$(CONFIG_VIDEO_AMBA) += amba.o COBJS-$(CONFIG_VIDEO_BCM2835) += bcm2835.o COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o diff --git a/drivers/video/amba.c b/drivers/video/amba.c deleted file mode 100644 index ffa1c399e1..0000000000 --- a/drivers/video/amba.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Driver for AMBA PrimeCell CLCD - * - * Copyright (C) 2009 Alessandro Rubini - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <lcd.h> -#include <amba_clcd.h> - -/* These variables are required by lcd.c -- although it sets them by itself */ -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; -void *lcd_base; -void *lcd_console_address; -short console_col; -short console_row; - -/* - * To use this driver you need to provide the following in board files: - * a panel_info definition - * an lcd_enable function (can't define a weak default with current code) - */ - -/* There is nothing to do with color registers, we use true color */ -void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) -{ - return; -} - -/* Low level initialization of the logic cell: depends on panel_info */ -void lcd_ctrl_init(void *lcdbase) -{ - struct clcd_config *config; - struct clcd_registers *regs; - u32 cntl; - - config = panel_info.priv; - regs = config->address; - cntl = config->cntl & ~CNTL_LCDEN; - - /* Lazily, just copy the registers over: first control with disable */ - writel(cntl, ®s->cntl); - - writel(config->tim0, ®s->tim0); - writel(config->tim1, ®s->tim1); - writel(config->tim2, ®s->tim2); - writel(config->tim3, ®s->tim3); - writel((u32)lcdbase, ®s->ubas); - /* finally, enable */ - writel(cntl | CNTL_LCDEN, ®s->cntl); -} - -/* This is trivial, and copied from atmel_lcdfb.c */ -ulong calc_fbsize(void) -{ - return ((panel_info.vl_col * panel_info.vl_row * - NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE; -} diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c index b10ca4b677..fc95897747 100644 --- a/drivers/video/atmel_hlcdfb.c +++ b/drivers/video/atmel_hlcdfb.c @@ -29,16 +29,6 @@ #include <lcd.h> #include <atmel_hlcdc.h> -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 #define ATMEL_LCDC_DMA_BURST_LEN 8 diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index c02ffd8036..2afeab2ffb 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -29,16 +29,6 @@ #include <lcd.h> #include <atmel_lcdc.h> -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 #define ATMEL_LCDC_DMA_BURST_LEN 8 diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c index 1e9a84ac1f..0c77d17b44 100644 --- a/drivers/video/bcm2835.c +++ b/drivers/video/bcm2835.c @@ -23,17 +23,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Global variables that lcd.c expects to exist */ -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; -void *lcd_base; -void *lcd_console_address; -short console_col; -short console_row; vidinfo_t panel_info; -char lcd_cursor_enabled; -ushort lcd_cursor_width; -ushort lcd_cursor_height; struct msg_query { struct bcm2835_mbox_hdr hdr; @@ -119,7 +109,6 @@ void lcd_ctrl_init(void *lcdbase) panel_info.vl_bpix = LCD_COLOR16; gd->fb_base = msg_setup->allocate_buffer.body.resp.fb_address; - lcd_base = (void *)gd->fb_base; } void lcd_enable(void) diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 26f673a96a..61e1058adc 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1515,13 +1515,6 @@ int video_display_bitmap(ulong bmp_image, int x, int y) padded_line = (((width * bpp + 7) / 8) + 3) & ~0x3; - /* - * Just ignore elements which are completely beyond screen - * dimensions. - */ - if ((x >= VIDEO_VISIBLE_COLS) || (y >= VIDEO_VISIBLE_ROWS)) - return 0; - #ifdef CONFIG_SPLASH_SCREEN_ALIGN if (x == BMP_ALIGN_CENTER) x = max(0, (VIDEO_VISIBLE_COLS - width) / 2); @@ -1534,6 +1527,13 @@ int video_display_bitmap(ulong bmp_image, int x, int y) y = max(0, VIDEO_VISIBLE_ROWS - height + y + 1); #endif /* CONFIG_SPLASH_SCREEN_ALIGN */ + /* + * Just ignore elements which are completely beyond screen + * dimensions. + */ + if ((x >= VIDEO_VISIBLE_COLS) || (y >= VIDEO_VISIBLE_ROWS)) + return 0; + if ((x + width) > VIDEO_VISIBLE_COLS) width = VIDEO_VISIBLE_COLS - x; if ((y + height) > VIDEO_VISIBLE_ROWS) diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index dfe329fbc6..ed0823bf97 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -38,16 +38,6 @@ DECLARE_GLOBAL_DATA_PTR; -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_base; -void *lcd_console_address; - -short console_col; -short console_row; - static unsigned int panel_width, panel_height; /* @@ -71,11 +61,9 @@ static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid) fb_size = vid->vl_row * vid->vl_col * (NBITS(vid->vl_bpix) >> 3); - lcd_base = lcdbase; - palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; - exynos_fimd_lcd_init_mem((unsigned long)lcd_base, + exynos_fimd_lcd_init_mem((unsigned long)lcdbase, (unsigned long)fb_size, palette_size); } @@ -346,7 +334,7 @@ void lcd_ctrl_init(void *lcdbase) void lcd_enable(void) { if (panel_info.logo_on) { - memset(lcd_base, 0, panel_width * panel_height * + memset((void *) gd->fb_base, 0, panel_width * panel_height * (NBITS(panel_info.vl_bpix) >> 3)); #ifdef CONFIG_CMD_BMP draw_logo(); diff --git a/arch/powerpc/cpu/mpc8xx/lcd.c b/drivers/video/mpc8xx_lcd.c index 4b88b21b3f..f0f728e228 100644 --- a/arch/powerpc/cpu/mpc8xx/lcd.c +++ b/drivers/video/mpc8xx_lcd.c @@ -253,40 +253,6 @@ vidinfo_t panel_info = { LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0 }; #endif -/*----------------------------------------------------------------------*/ - - -int lcd_line_length; - -int lcd_color_fg; -int lcd_color_bg; - -/* - * Frame buffer memory information - */ -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - -/************************************************************************/ - -void lcd_ctrl_init (void *lcdbase); -void lcd_enable (void); -#if LCD_BPP == LCD_COLOR8 -void lcd_setcolreg (ushort regno, - ushort red, ushort green, ushort blue); -#endif -#if LCD_BPP == LCD_MONOCHROME -void lcd_initcolregs (void); -#endif - -#if defined(CONFIG_RBC823) -void lcd_disable (void); -#endif - -/************************************************************************/ /************************************************************************/ /* ----------------- chipset specific functions ----------------------- */ @@ -401,8 +367,8 @@ void lcd_ctrl_init (void *lcdbase) * BIG NOTE: This has to be modified to load A and B depending * upon the split mode of the LCD. */ - lcdp->lcd_lcfaa = (ulong)lcd_base; - lcdp->lcd_lcfba = (ulong)lcd_base; + lcdp->lcd_lcfaa = (ulong)lcdbase; + lcdp->lcd_lcfba = (ulong)lcdbase; /* MORE HACKS...This must be updated according to 823 manual * for different panels. @@ -432,29 +398,6 @@ void lcd_ctrl_init (void *lcdbase) /*----------------------------------------------------------------------*/ -#ifdef NOT_USED_SO_FAR -static void -lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = &(immr->im_cpm); - unsigned short colreg, *cmap_ptr; - - cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2]; - - colreg = *cmap_ptr; -#ifdef CONFIG_SYS_INVERT_COLORS - colreg ^= 0x0FFF; -#endif - - *red = (colreg >> 8) & 0x0F; - *green = (colreg >> 4) & 0x0F; - *blue = colreg & 0x0F; -} -#endif /* NOT_USED_SO_FAR */ - -/*----------------------------------------------------------------------*/ - #if LCD_BPP == LCD_COLOR8 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) diff --git a/arch/arm/cpu/pxa/pxafb.c b/drivers/video/pxa_lcd.c index 987fa0682c..b40ec3689b 100644 --- a/arch/arm/cpu/pxa/pxafb.c +++ b/drivers/video/pxa_lcd.c @@ -317,36 +317,10 @@ vidinfo_t panel_info = { /*----------------------------------------------------------------------*/ -#if LCD_BPP == LCD_COLOR8 -void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); -#endif -#if LCD_BPP == LCD_MONOCHROME -void lcd_initcolregs (void); -#endif - -#ifdef NOT_USED_SO_FAR -void lcd_disable (void); -void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue); -#endif /* NOT_USED_SO_FAR */ - -void lcd_ctrl_init (void *lcdbase); -void lcd_enable (void); - -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid); static void pxafb_setup_gpio (vidinfo_t *vid); static void pxafb_enable_controller (vidinfo_t *vid); static int pxafb_init (vidinfo_t *vid); -/************************************************************************/ /************************************************************************/ /* --------------- PXA chipset specific functions ------------------- */ @@ -361,14 +335,6 @@ void lcd_ctrl_init (void *lcdbase) } /*----------------------------------------------------------------------*/ -#ifdef NOT_USED_SO_FAR -void -lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) -{ -} -#endif /* NOT_USED_SO_FAR */ - -/*----------------------------------------------------------------------*/ #if LCD_BPP == LCD_COLOR8 void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) @@ -416,15 +382,6 @@ void lcd_enable (void) { } -/*----------------------------------------------------------------------*/ -#ifdef NOT_USED_SO_FAR -static void lcd_disable (void) -{ -} -#endif /* NOT_USED_SO_FAR */ - -/*----------------------------------------------------------------------*/ - /************************************************************************/ /* ** PXA255 specific routines */ /************************************************************************/ diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c index afcb00881e..8d533955a5 100644 --- a/drivers/video/tegra.c +++ b/drivers/video/tegra.c @@ -60,77 +60,15 @@ enum { LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ }; -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_base; /* Start of framebuffer memory */ -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - vidinfo_t panel_info = { /* Insert a value here so that we don't end up in the BSS */ .vl_col = -1, }; -char lcd_cursor_enabled; - -ushort lcd_cursor_width; -ushort lcd_cursor_height; - #ifndef CONFIG_OF_CONTROL #error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support" #endif -void lcd_cursor_size(ushort width, ushort height) -{ - lcd_cursor_width = width; - lcd_cursor_height = height; -} - -void lcd_toggle_cursor(void) -{ - ushort x, y; - uchar *dest; - ushort row; - - x = console_col * lcd_cursor_width; - y = console_row * lcd_cursor_height; - dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / - 8); - - for (row = 0; row < lcd_cursor_height; ++row, dest += lcd_line_length) { - ushort *d = (ushort *)dest; - ushort color; - int i; - - for (i = 0; i < lcd_cursor_width; ++i) { - color = *d; - color ^= lcd_color_fg; - *d = color; - ++d; - } - } -} - -void lcd_cursor_on(void) -{ - lcd_cursor_enabled = 1; - lcd_toggle_cursor(); -} -void lcd_cursor_off(void) -{ - lcd_cursor_enabled = 0; - lcd_toggle_cursor(); -} - -char lcd_is_cursor_enabled(void) -{ - return lcd_cursor_enabled; -} - static void update_panel_size(struct fdt_disp_config *config) { panel_info.vl_col = config->width; @@ -150,8 +88,6 @@ void lcd_ctrl_init(void *lcdbase) assert(disp_config); - lcd_base = (void *)disp_config->frame_buffer; - /* Make sure that we can acommodate the selected LCD */ assert(disp_config->width <= LCD_MAX_WIDTH); assert(disp_config->height <= LCD_MAX_HEIGHT); @@ -172,7 +108,7 @@ void lcd_ctrl_init(void *lcdbase) /* Enable flushing after LCD writes if requested */ lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH); - debug("LCD frame buffer at %p\n", lcd_base); + debug("LCD frame buffer at %08X\n", disp_config->frame_buffer); } ulong calc_fbsize(void) diff --git a/dts/Makefile b/dts/Makefile index 6f36153634..03e163ef0a 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -27,9 +27,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdts.o +ifeq ($(DEVICE_TREE),) $(if $(CONFIG_DEFAULT_DEVICE_TREE),,\ $(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file)) DEVICE_TREE = $(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE)) +endif $(if $(CONFIG_ARCH_DEVICE_TREE),,\ $(error Your architecture does not have device tree support enabled. \ diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h index 87cab168ee..72cd020711 100644 --- a/fs/ext4/ext4_common.h +++ b/fs/ext4/ext4_common.h @@ -44,8 +44,6 @@ #define YES 1 #define NO 0 -#define TRUE 1 -#define FALSE 0 #define RECOVER 1 #define SCAN 0 diff --git a/fs/ext4/ext4_journal.c b/fs/ext4/ext4_journal.c index 9f017084f1..ba4a7bb713 100644 --- a/fs/ext4/ext4_journal.c +++ b/fs/ext4/ext4_journal.c @@ -37,7 +37,7 @@ static struct revoke_blk_list *revk_blk_list; static struct revoke_blk_list *prev_node; -static int first_node = TRUE; +static int first_node = true; int gindex; int gd_index; @@ -268,10 +268,10 @@ void ext4fs_push_revoke_blk(char *buffer) return; memcpy(node->content, buffer, fs->blksz); - if (first_node == TRUE) { + if (first_node == true) { revk_blk_list = node; prev_node = node; - first_node = FALSE; + first_node = false; } else { prev_node->next = node; prev_node = node; @@ -298,7 +298,7 @@ void ext4fs_free_revoke_blks(void) revk_blk_list = NULL; prev_node = NULL; - first_node = TRUE; + first_node = true; } int check_blknr_for_revoke(long int blknr, int sequence_no) diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 0af471afb9..633631e4d4 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -463,8 +463,12 @@ static inline ino_t parent_ino(struct dentry *dentry) #define UBIFS_VERSION 1 /* Normal UBIFS messages */ +#ifdef CONFIG_UBIFS_SILENCE_MSG +#define ubifs_msg(fmt, ...) +#else #define ubifs_msg(fmt, ...) \ printk(KERN_NOTICE "UBIFS: " fmt "\n", ##__VA_ARGS__) +#endif /* UBIFS error messages */ #define ubifs_err(fmt, ...) \ printk(KERN_ERR "UBIFS error (pid %d): %s: " fmt "\n", 0, \ diff --git a/include/ansi.h b/include/ansi.h new file mode 100644 index 0000000000..0e40b1d4ef --- /dev/null +++ b/include/ansi.h @@ -0,0 +1,42 @@ +/* + * (C) Copyright 2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * ANSI terminal + */ + +#define ANSI_CURSOR_UP "\e[%dA" +#define ANSI_CURSOR_DOWN "\e[%dB" +#define ANSI_CURSOR_FORWARD "\e[%dC" +#define ANSI_CURSOR_BACK "\e[%dD" +#define ANSI_CURSOR_NEXTLINE "\e[%dE" +#define ANSI_CURSOR_PREVIOUSLINE "\e[%dF" +#define ANSI_CURSOR_COLUMN "\e[%dG" +#define ANSI_CURSOR_POSITION "\e[%d;%dH" +#define ANSI_CURSOR_SHOW "\e[?25h" +#define ANSI_CURSOR_HIDE "\e[?25l" +#define ANSI_CLEAR_CONSOLE "\e[2J" +#define ANSI_CLEAR_LINE_TO_END "\e[0K" +#define ANSI_CLEAR_LINE "\e[2K" +#define ANSI_COLOR_RESET "\e[0m" +#define ANSI_COLOR_REVERSE "\e[7m" diff --git a/include/at91rm9200_net.h b/include/at91rm9200_net.h index f799206e42..804105f584 100644 --- a/include/at91rm9200_net.h +++ b/include/at91rm9200_net.h @@ -23,10 +23,6 @@ #include <asm/io.h> #include <asm/arch/hardware.h> -#define FALSE 0 -#define TRUE 1 - - #define ETHERNET_ADDRESS_SIZE 6 typedef unsigned char UCHAR; diff --git a/include/bedbug/ppc.h b/include/bedbug/ppc.h index 46bf8db1a7..76d86fdbf7 100644 --- a/include/bedbug/ppc.h +++ b/include/bedbug/ppc.h @@ -296,11 +296,6 @@ struct operand { ((rc) & 0x1)) #define MDS_MASK MDS_OPCODE(0x3f,0xf,0x1) -#ifndef FALSE -#define FALSE 0 -#define TRUE (!FALSE) -#endif - #define INSTRUCTION( memaddr ) ntohl(*(unsigned long *)(memaddr)) #define MAX_OPERANDS 8 diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 868a0b8044..60cccffc45 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x40000000 #define CONFIG_LCD +#define CONFIG_MPC8XX_LCD #undef CONFIG_EDT32F10 #define CONFIG_SHARP_LQ057Q3DC02 diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index b042c67020..d4bcc62e45 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -47,6 +47,7 @@ #endif #define CONFIG_KEYBOARD 1 /* This board has a custom keybpard */ #define CONFIG_LCD 1 /* use LCD controller ... */ +#define CONFIG_MPC8XX_LCD #define CONFIG_HITACHI_SP19X001_Z1A /* The LCD type we use */ #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 67ab1e962b..d8e28d5ea9 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -54,6 +54,7 @@ #define CONFIG_SYS_TEXT_BASE 0xff000000 #ifdef CONFIG_LCD /* with LCD controller ? */ +#define CONFIG_MPC8XX_LCD #define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ #endif diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index e2b22f0bae..e2ea016387 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -110,7 +110,9 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#ifndef CONFIG_LCD +#ifdef CONFIG_LCD +#define CONFIG_MPC8XX_LCD +#else #define CONFIG_VIDEO 1 /* To enable the video initialization */ /* Video related */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 9fac5d15c7..cccf3afb62 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x40000000 #ifdef CONFIG_LCD /* with LCD controller ? */ +#define CONFIG_MPC8XX_LCD #define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */ #define CONFIG_LCD_INFO 1 /* ... and some board info */ #define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 932f158b2c..b2d1af0dd1 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x40000000 #ifdef CONFIG_LCD /* with LCD controller ? */ +#define CONFIG_MPC8XX_LCD /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */ #endif diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index dbd5ef327b..ef00306a55 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -39,6 +39,8 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* commands to include */ #include <config_cmd_default.h> @@ -60,6 +62,11 @@ "fdtfile=\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \ + "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ + "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ @@ -167,8 +174,8 @@ #define CONFIG_CMD_ECHO -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 64 /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 @@ -197,6 +204,7 @@ #define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE #define CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT4 #define CONFIG_CMD_FS_GENERIC @@ -209,6 +217,38 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED (24000000) +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET + +/* USB TI's IDs */ +#define CONFIG_USBD_HS +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" + +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_DFU_NAND +#define CONFIG_CMD_DFU +#define DFU_ALT_INFO_MMC \ + "boot part 0 1;" \ + "rootfs part 0 2;" \ + "MLO fat 0 1;" \ + "MLO.raw mmc 100 100;" \ + "u-boot.img.raw mmc 300 3C0;" \ + "u-boot.img fat 0 1;" \ + "uEnv.txt fat 0 1" +#define DFU_ALT_INFO_NAND \ + "SPL part 0 1;" \ + "SPL.backup1 part 0 2;" \ + "SPL.backup2 part 0 3;" \ + "SPL.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "kernel part 0 7;" \ + "rootfs part 0 8" + /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ @@ -354,6 +394,7 @@ #define CONFIG_MUSB_PIO_ONLY #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL @@ -425,6 +466,13 @@ /* NAND support */ #ifdef CONFIG_NAND #define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ + "128k(SPL.backup1)," \ + "128k(SPL.backup2)," \ + "128k(SPL.backup3),1920k(u-boot)," \ + "128k(u-boot-env),5m(kernel),-(rootfs)" #define CONFIG_NAND_OMAP_GPMC #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 5886a155dc..b99a05690e 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -38,6 +38,7 @@ #define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */ #define CONFIG_LCD 1 #ifdef CONFIG_LCD +#define CONFIG_PXA_LCD #define CONFIG_SHARP_LM8V31 #endif #define CONFIG_MMC diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index df4978161e..3c02b73d8b 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -54,6 +54,7 @@ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ #define CONFIG_LCD 1 /* use LCD controller ... */ +#define CONFIG_MPC8XX_LCD #define CONFIG_HLD1045 1 /* ... with a HLD1045 display */ #define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 8506604a76..965330aa38 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -148,6 +148,7 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ #ifdef ONENAND_SUPPORT @@ -287,8 +288,6 @@ int rx51_kp_getc(void); #endif /* Environment information */ -#define CONFIG_BOOTDELAY 3 - #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "usbtty=cdc_acm\0" \ @@ -360,10 +359,40 @@ int rx51_kp_getc(void); "fi\0" \ "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ "sdboot=setenv mmcnum 0; run trymmcboot\0" \ + "menucmd=bootmenu\0" \ + "bootmenu_0=Attached kernel=run attachboot\0" \ + "bootmenu_1=Internal eMMC=run emmcboot\0" \ + "bootmenu_2=External SD card=run sdboot\0" \ + "bootmenu_3=U-Boot boot order=boot\0" \ + "bootmenu_delay=30\0" \ "" #define CONFIG_PREBOOT \ - "if run slide; then true; else run attachboot; fi;" \ + "setenv mmcnum 1; setenv mmcpart 1;" \ + "setenv mmcscriptfile bootmenu.scr;" \ + "if run switchmmc; then " \ + "setenv mmcdone true;" \ + "setenv mmctype fat;" \ + "if run scriptload; then true; else " \ + "setenv mmctype ext2;" \ + "if run scriptload; then true; else " \ + "setenv mmctype ext4;" \ + "if run scriptload; then true; else " \ + "setenv mmcdone false;" \ + "fi;" \ + "fi;" \ + "fi;" \ + "if ${mmcdone}; then " \ + "run scriptboot;" \ + "fi;" \ + "fi;" \ + "if run slide; then true; else " \ + "setenv bootmenu_delay 0;" \ + "setenv bootdelay 0;" \ + "fi" + +#define CONFIG_POSTBOOTMENU \ + "echo;" \ "echo Extra commands:;" \ "echo run sercon - Use serial port for control.;" \ "echo run usbcon - Use usbtty for control.;" \ @@ -379,6 +408,11 @@ int rx51_kp_getc(void); "run attachboot;" \ "echo" +#define CONFIG_BOOTDELAY 30 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_MENU +#define CONFIG_MENU_SHOW + /* * Miscellaneous configurable options */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 3f9802ca0f..4ee2e46cd2 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -72,6 +72,7 @@ #define CONFIG_CMD_MMC #define CONFIG_CMD_IDE #define CONFIG_LCD +#define CONFIG_PXA_LCD /* * MMC Card Configuration diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 64771e7e8d..70fe05c519 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -74,6 +74,7 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_MMC #define CONFIG_LCD +#define CONFIG_PXA_LCD /* * MMC Card Configuration diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 5a15af6b6a..39c167fc6f 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -59,6 +59,7 @@ #undef CONFIG_LCD #ifdef CONFIG_LCD +#define CONFIG_PXA_LCD #define CONFIG_SHARP_LM8V31 #endif diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 2b24997f80..3c8c74d59a 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -38,6 +38,7 @@ /* SC85T,SC860T, FEL8xx-AT(855T/860T) */ /*#define CONFIG_FEL8xx_AT */ /*#define CONFIG_LCD */ +/*#define CONFIG_MPC8XX_LCD*/ /* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */ /* #define CONFIG_50MHz */ /* #define CONFIG_66MHz */ diff --git a/include/configs/v37.h b/include/configs/v37.h index e36d2491cc..f9965db3cb 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x40000000 #define CONFIG_LCD +#define CONFIG_MPC8XX_LCD #define CONFIG_SHARP_LQ084V1DG21 #undef CONFIG_LCD_LOGO diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index b92f70b538..f79dd3bbd8 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -103,6 +103,7 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_SOFT_SPI #define CONFIG_LCD +#define CONFIG_PXA_LCD #define CONFIG_LMS283GF05 #define CONFIG_VIDEO_LOGO #define CONFIG_CMD_BMP diff --git a/include/dfu.h b/include/dfu.h index 5350d79450..a107f4b13e 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -52,14 +52,26 @@ struct mmc_internal_data { unsigned int part; }; +struct nand_internal_data { + /* RAW programming */ + u64 start; + u64 size; + + unsigned int dev; + unsigned int part; +}; + static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; } -#define DFU_NAME_SIZE 32 -#define DFU_CMD_BUF_SIZE 128 -#define DFU_DATA_BUF_SIZE (1024*1024*4) /* 4 MiB */ +#define DFU_NAME_SIZE 32 +#define DFU_CMD_BUF_SIZE 128 +#define DFU_DATA_BUF_SIZE (1024*1024*8) /* 8 MiB */ +#ifndef CONFIG_SYS_DFU_MAX_FILE_SIZE +#define CONFIG_SYS_DFU_MAX_FILE_SIZE (4 << 20) /* 4 MiB */ +#endif struct dfu_entity { char name[DFU_NAME_SIZE]; @@ -71,12 +83,32 @@ struct dfu_entity { union { struct mmc_internal_data mmc; + struct nand_internal_data nand; } data; - int (*read_medium)(struct dfu_entity *dfu, void *buf, long *len); - int (*write_medium)(struct dfu_entity *dfu, void *buf, long *len); + int (*read_medium)(struct dfu_entity *dfu, + u64 offset, void *buf, long *len); + + int (*write_medium)(struct dfu_entity *dfu, + u64 offset, void *buf, long *len); + + int (*flush_medium)(struct dfu_entity *dfu); struct list_head list; + + /* on the fly state */ + u32 crc; + u64 offset; + int i_blk_seq_num; + u8 *i_buf; + u8 *i_buf_start; + u8 *i_buf_end; + long r_left; + long b_left; + + u32 bad_skip; /* for nand use */ + + unsigned int inited:1; }; int dfu_config_entities(char *s, char *interface, int num); @@ -100,4 +132,15 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) return -1; } #endif + +#ifdef CONFIG_DFU_NAND +extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) +{ + puts("NAND support not available!\n"); + return -1; +} +#endif + #endif /* __DFU_ENTITY_H_ */ diff --git a/include/environment.h b/include/environment.h index e64b43d2d9..4c6a37b112 100644 --- a/include/environment.h +++ b/include/environment.h @@ -96,6 +96,24 @@ extern unsigned long nand_env_oob_offset; # endif #endif /* CONFIG_ENV_IS_IN_NAND */ +#if defined(CONFIG_ENV_IS_IN_UBI) +# ifndef CONFIG_ENV_UBI_PART +# error "Need to define CONFIG_ENV_UBI_PART when using CONFIG_ENV_IS_IN_UBI" +# endif +# ifndef CONFIG_ENV_UBI_VOLUME +# error "Need to define CONFIG_ENV_UBI_VOLUME when using CONFIG_ENV_IS_IN_UBI" +# endif +# if defined(CONFIG_ENV_UBI_VOLUME_REDUND) +# define CONFIG_SYS_REDUNDAND_ENVIRONMENT +# endif +# ifndef CONFIG_ENV_SIZE +# error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_UBI" +# endif +# ifndef CONFIG_CMD_UBI +# error "Need to define CONFIG_CMD_UBI when using CONFIG_ENV_IS_IN_UBI" +# endif +#endif /* CONFIG_ENV_IS_IN_UBI */ + /* Embedded env is only supported for some flash types */ #ifdef CONFIG_ENV_IS_EMBEDDED # if !defined(CONFIG_ENV_IS_IN_FLASH) && \ diff --git a/include/fpga.h b/include/fpga.h index e0b1fe71a8..30a4e6a2e8 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -31,14 +31,6 @@ #define CONFIG_MAX_FPGA_DEVICES 5 #endif -/* these probably belong somewhere else */ -#ifndef FALSE -#define FALSE (0) -#endif -#ifndef TRUE -#define TRUE (!FALSE) -#endif - /* CONFIG_FPGA bit assignments */ #define CONFIG_SYS_FPGA_MAN(x) (x) #define CONFIG_SYS_FPGA_DEV(x) ((x) << 8 ) diff --git a/include/galileo/core.h b/include/galileo/core.h index c277509298..95013fac26 100644 --- a/include/galileo/core.h +++ b/include/galileo/core.h @@ -14,6 +14,7 @@ space). The macros take care of Big/Little endian conversions. /* includes */ #include "gt64260R.h" +#include <stdbool.h> extern unsigned int INTERNAL_REG_BASE_ADDR; @@ -110,11 +111,6 @@ extern unsigned int INTERNAL_REG_BASE_ADDR; #define _1G 0x40000000 #define _2G 0x80000000 -#ifndef BOOL_WAS_DEFINED -#define BOOL_WAS_DEFINED -typedef enum _bool{false,true} bool; -#endif - /* Little to Big endian conversion macros */ #ifdef LE /* Little Endian */ diff --git a/include/lcd.h b/include/lcd.h index a6822d29fe..c6e7fc5216 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -32,31 +32,22 @@ extern char lcd_is_enabled; extern int lcd_line_length; -extern int lcd_color_fg; -extern int lcd_color_bg; -/* - * Frame buffer memory information - */ -extern void *lcd_base; /* Start of framebuffer memory */ -extern void *lcd_console_address; /* Start of console buffer */ - -extern short console_col; -extern short console_row; extern struct vidinfo panel_info; -extern void lcd_ctrl_init (void *lcdbase); -extern void lcd_enable (void); -extern int board_splash_screen_prepare(void); +void lcd_ctrl_init(void *lcdbase); +void lcd_enable(void); +int board_splash_screen_prepare(void); /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ -extern void lcd_setcolreg (ushort regno, - ushort red, ushort green, ushort blue); -extern void lcd_initcolregs (void); +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue); +void lcd_initcolregs(void); + +int lcd_getfgcolor(void); /* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */ -extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp); -extern int bmp_display(ulong addr, int x, int y); +struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp); +int bmp_display(ulong addr, int x, int y); /** * Set whether we need to flush the dcache when changing the LCD image. This @@ -258,7 +249,6 @@ typedef struct vidinfo { unsigned int sclk_div; unsigned int dual_lcd_enabled; - } vidinfo_t; void init_panel_info(vidinfo_t *vid); @@ -283,14 +273,12 @@ extern vidinfo_t panel_info; /* Video functions */ #if defined(CONFIG_RBC823) -void lcd_disable (void); +void lcd_disable(void); #endif - -/* int lcd_init (void *lcdbase); */ -void lcd_putc (const char c); -void lcd_puts (const char *s); -void lcd_printf (const char *fmt, ...); +void lcd_putc(const char c); +void lcd_puts(const char *s); +void lcd_printf(const char *fmt, ...); void lcd_clear(void); int lcd_display_bitmap(ulong bmp_image, int x, int y); @@ -350,7 +338,7 @@ int lcd_get_size(int *line_length); * is connected, as we can't autodetect anything. */ #define CONFIG_SYS_HIGH 0 /* Pins are active high */ -#define CONFIG_SYS_LOW 1 /* Pins are active low */ +#define CONFIG_SYS_LOW 1 /* Pins are active low */ #define LCD_MONOCHROME 0 #define LCD_COLOR2 1 @@ -364,10 +352,10 @@ int lcd_get_size(int *line_length); # define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) #elif defined(CONFIG_LCD_LOGO) # define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) +# define LCD_INFO_Y VIDEO_FONT_HEIGHT #else -# define LCD_INFO_X (VIDEO_FONT_WIDTH) -# define LCD_INFO_Y (VIDEO_FONT_HEIGHT) +# define LCD_INFO_X VIDEO_FONT_WIDTH +# define LCD_INFO_Y VIDEO_FONT_HEIGHT #endif /* Default to 8bpp if bit depth not specified */ @@ -424,33 +412,5 @@ int lcd_get_size(int *line_length); #endif /************************************************************************/ -/* ** CONSOLE DEFINITIONS & FUNCTIONS */ -/************************************************************************/ -#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO) -# define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \ - / VIDEO_FONT_HEIGHT) -#else -# define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT) -#endif - -#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH) -#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length) -#define CONSOLE_ROW_FIRST (lcd_console_address) -#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE) -#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \ - - CONSOLE_ROW_SIZE) -#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS) -#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE) - -#if LCD_BPP == LCD_MONOCHROME -# define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ - (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) -#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) -# define COLOR_MASK(c) (c) -#else -# error Unsupported LCD BPP. -#endif - -/************************************************************************/ #endif /* _LCD_H_ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index e9e904523a..98bf255bb2 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -180,7 +180,7 @@ typedef enum { */ #define BBT_AUTO_REFRESH 0x00000080 /* - * Chip does not require ready check on read. True + * Chip does not require ready check on read. true * for all large page devices, as they do not support * autoincrement. */ diff --git a/include/linux/types.h b/include/linux/types.h index 1b0b4a44c4..f07ba41b72 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -7,6 +7,7 @@ #include <linux/posix_types.h> #include <asm/types.h> +#include <stdbool.h> #ifndef __KERNEL_STRICT_NAMES diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index eba865ea09..220d068600 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -421,11 +421,11 @@ struct device { * driver setup() requests * @ep_list: List of other endpoints supported by the device. * @speed: Speed of current connection to USB host. - * @is_dualspeed: True if the controller supports both high and full speed + * @is_dualspeed: true if the controller supports both high and full speed * operation. If it does, the gadget driver must also support both. - * @is_otg: True if the USB device port uses a Mini-AB jack, so that the + * @is_otg: true if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. - * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable + * @is_a_peripheral: false unless is_otg, the "A" end of a USB cable * is in the Mini-AB jack, and HNP has been used to switch roles * so that the "A" device currently acts as A-Peripheral, not A-Host. * @a_hnp_support: OTG device feature flag, indicating that the A-Host diff --git a/include/malloc.h b/include/malloc.h index 6295929ea3..c33f3b494e 100644 --- a/include/malloc.h +++ b/include/malloc.h @@ -196,7 +196,7 @@ MORECORE_FAILURE (default: -1) The value returned upon failure of MORECORE. MORECORE_CLEARS (default 1) - True (1) if the routine mapped to MORECORE zeroes out memory (which + true (1) if the routine mapped to MORECORE zeroes out memory (which holds for sbrk). DEFAULT_TRIM_THRESHOLD DEFAULT_TOP_PAD diff --git a/include/menu.h b/include/menu.h index 7af5fdb0ed..d8200eee83 100644 --- a/include/menu.h +++ b/include/menu.h @@ -21,12 +21,15 @@ struct menu; struct menu *menu_create(char *title, int timeout, int prompt, - void (*item_data_print)(void *)); + void (*item_data_print)(void *), + char *(*item_choice)(void *), + void *item_choice_data); int menu_default_set(struct menu *m, char *item_key); int menu_get_choice(struct menu *m, void **choice); int menu_item_add(struct menu *m, char *item_key, void *item_data); int menu_destroy(struct menu *m); void menu_display_statusline(struct menu *m); +int menu_default_choice(struct menu *m, void **choice); #if defined(CONFIG_MENU_SHOW) int menu_show(int bootdelay); diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 966b5e00ca..9bd76eb976 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -78,29 +78,30 @@ #define FLASH_CONTINUATION_CODE 0x7F #define FLASH_OFFSET_MANUFACTURER_ID 0x00 -#define FLASH_OFFSET_DEVICE_ID 0x01 -#define FLASH_OFFSET_DEVICE_ID2 0x0E -#define FLASH_OFFSET_DEVICE_ID3 0x0F -#define FLASH_OFFSET_CFI 0x55 +#define FLASH_OFFSET_DEVICE_ID 0x02 +#define FLASH_OFFSET_DEVICE_ID2 0x1C +#define FLASH_OFFSET_DEVICE_ID3 0x1E +#define FLASH_OFFSET_CFI 0xAA + #define FLASH_OFFSET_CFI_ALT 0x555 -#define FLASH_OFFSET_CFI_RESP 0x10 -#define FLASH_OFFSET_PRIMARY_VENDOR 0x13 +#define FLASH_OFFSET_CFI_RESP 0x20 +#define FLASH_OFFSET_PRIMARY_VENDOR 0x26 /* extended query table primary address */ -#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15 +#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x2A #define FLASH_OFFSET_WTOUT 0x1F -#define FLASH_OFFSET_WBTOUT 0x20 -#define FLASH_OFFSET_ETOUT 0x21 -#define FLASH_OFFSET_CETOUT 0x22 -#define FLASH_OFFSET_WMAX_TOUT 0x23 -#define FLASH_OFFSET_WBMAX_TOUT 0x24 -#define FLASH_OFFSET_EMAX_TOUT 0x25 -#define FLASH_OFFSET_CEMAX_TOUT 0x26 -#define FLASH_OFFSET_SIZE 0x27 -#define FLASH_OFFSET_INTERFACE 0x28 -#define FLASH_OFFSET_BUFFER_SIZE 0x2A -#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C -#define FLASH_OFFSET_ERASE_REGIONS 0x2D -#define FLASH_OFFSET_PROTECT 0x02 +#define FLASH_OFFSET_WBTOUT 0x40 +#define FLASH_OFFSET_ETOUT 0x4A +#define FLASH_OFFSET_CETOUT 0x44 +#define FLASH_OFFSET_WMAX_TOUT 0x46 +#define FLASH_OFFSET_WBMAX_TOUT 0x48 +#define FLASH_OFFSET_EMAX_TOUT 0x4A +#define FLASH_OFFSET_CEMAX_TOUT 0x4C +#define FLASH_OFFSET_SIZE 0x4E +#define FLASH_OFFSET_INTERFACE 0x50 +#define FLASH_OFFSET_BUFFER_SIZE 0x54 +#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x58 +#define FLASH_OFFSET_ERASE_REGIONS 0x5A +#define FLASH_OFFSET_PROTECT 0x04 #define FLASH_OFFSET_USER_PROTECTION 0x85 #define FLASH_OFFSET_INTEL_PROTECTION 0x81 diff --git a/include/nand.h b/include/nand.h index dded4e27f0..f0f3bf94b5 100644 --- a/include/nand.h +++ b/include/nand.h @@ -129,7 +129,7 @@ struct nand_erase_options { typedef struct nand_erase_options nand_erase_options_t; int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer); + size_t *actual, loff_t lim, u_char *buffer); #define WITH_YAFFS_OOB (1 << 0) /* whether write with yaffs format. This flag * is a 'mode' meaning it cannot be mixed with @@ -137,7 +137,7 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, #define WITH_DROP_FFS (1 << 1) /* drop trailing all-0xff pages */ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, - u_char *buffer, int flags); + size_t *actual, loff_t lim, u_char *buffer, int flags); int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); int nand_torture(nand_info_t *nand, loff_t offset); diff --git a/include/scsi.h b/include/scsi.h index 9da764bdcf..c764e159fe 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -204,12 +204,4 @@ int scsi_get_disk_count(void); #define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */ - -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #endif /* _SCSI_H */ diff --git a/include/sym53c8xx.h b/include/sym53c8xx.h index 7d3ded5fe8..9696db073c 100644 --- a/include/sym53c8xx.h +++ b/include/sym53c8xx.h @@ -568,11 +568,4 @@ #define SCSI_IDENTIFY 0xC0 -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - #endif diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 69006e250a..7f720229a6 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -214,6 +214,9 @@ static inline long IS_ERR(const void *ptr) extern int ubi_mtd_param_parse(const char *val, struct kernel_param *kp); extern int ubi_init(void); extern void ubi_exit(void); +extern int ubi_part(char *part_name, const char *vid_header_offset); +extern int ubi_volume_write(char *volume, void *buf, size_t size); +extern int ubi_volume_read(char *volume, char *buf, size_t size); extern struct ubi_device *ubi_devices[]; diff --git a/include/usbdevice.h b/include/usbdevice.h index 7037efd33e..265ba4acd5 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -676,8 +676,8 @@ struct usb_device_descriptor *usbd_device_device_descriptor(struct #if defined(CONFIG_USBD_HS) /* * is_usbd_high_speed routine needs to be defined by specific gadget driver - * It returns TRUE if device enumerates at High speed - * Retuns FALSE otherwise + * It returns true if device enumerates at High speed + * Retuns false otherwise */ int is_usbd_high_speed(void); #endif diff --git a/include/xyzModem.h b/include/xyzModem.h index f437bbd0bd..a3ea768094 100644 --- a/include/xyzModem.h +++ b/include/xyzModem.h @@ -97,14 +97,6 @@ typedef struct { #endif } connection_info_t; -#ifndef BOOL_WAS_DEFINED -#define BOOL_WAS_DEFINED -typedef unsigned int bool; -#endif - -#define false 0 -#define true 1 - #endif diff --git a/tools/buildman/.gitignore b/tools/buildman/.gitignore new file mode 100644 index 0000000000..0d20b6487c --- /dev/null +++ b/tools/buildman/.gitignore @@ -0,0 +1 @@ +*.pyc diff --git a/tools/buildman/README b/tools/buildman/README new file mode 100644 index 0000000000..72210070ab --- /dev/null +++ b/tools/buildman/README @@ -0,0 +1,679 @@ +# Copyright (c) 2013 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +What is this? +============= + +This tool handles building U-Boot to check that you have not broken it +with your patch series. It can build each individual commit and report +which boards fail on which commits, and which errors come up. It aims +to make full use of multi-processor machines. + +A key feature of buildman is its output summary, which allows warnings, +errors or image size increases in a particular commit or board to be +quickly identified and the offending commit pinpointed. This can be a big +help for anyone working with >10 patches at a time. + + +Caveats +======= + +Buildman is still in its infancy. It is already a very useful tool, but +expect to find problems and send patches. + +Buildman can be stopped and restarted, in which case it will continue +where it left off. This should happen cleanly and without side-effects. +If not, it is a bug, for which a patch would be welcome. + +Buildman gets so tied up in its work that it can ignore the outside world. +You may need to press Ctrl-C several times to quit it. Also it will print +out various exceptions when stopped. + + +Theory of Operation +=================== + +(please read this section in full twice or you will be perpetually confused) + +Buildman is a builder. It is not make, although it runs make. It does not +produce any useful output on the terminal while building, except for +progress information. All the output (errors, warnings and binaries if you +are ask for them) is stored in output directories, which you can look at +while the build is progressing, or when it is finished. + +Buildman produces a concise summary of which boards succeeded and failed. +It shows which commit introduced which board failure using a simple +red/green colour coding. Full error information can be requested, in which +case it is de-duped and displayed against the commit that introduced the +error. An example workflow is below. + +Buildman stores image size information and can report changes in image size +from commit to commit. An example of this is below. + +Buildman starts multiple threads, and each thread builds for one board at +a time. A thread starts at the first commit, configures the source for your +board and builds it. Then it checks out the next commit and does an +incremental build. Eventually the thread reaches the last commit and stops. +If errors or warnings are found along the way, the thread will reconfigure +after every commit, and your build will be very slow. This is because a +file that produces just a warning would not normally be rebuilt in an +incremental build. + +Buildman works in an entirely separate place from your U-Boot repository. +It creates a separate working directory for each thread, and puts the +output files in the working directory, organised by commit name and board +name, in a two-level hierarchy. + +Buildman is invoked in your U-Boot directory, the one with the .git +directory. It clones this repository into a copy for each thread, and the +threads do not affect the state of your git repository. Any checkouts done +by the thread affect only the working directory for that thread. + +Buildman automatically selects the correct toolchain for each board. You +must supply suitable toolchains, but buildman takes care of selecting the +right one. + +Buildman always builds a branch, and always builds the upstream commit as +well, for comparison. It cannot build individual commits at present, unless +(maybe) you point it at an empty branch. Put all your commits in a branch, +set the branch's upstream to a valid value, and all will be well. Otherwise +buildman will perform random actions. Use -n to check what the random +actions might be. + +Buildman is optimised for building many commits at once, for many boards. +On multi-core machines, Buildman is fast because it uses most of the +available CPU power. When it gets to the end, or if you are building just +a few commits or boards, it will be pretty slow. As a tip, if you don't +plan to use your machine for anything else, you can use -T to increase the +number of threads beyond the default. + +Buildman lets you build all boards, or a subset. Specify the subset using +the board name, architecture name, SOC name, or anything else in the +boards.cfg file. So 'at91' will build all AT91 boards (arm), powerpc will +build all PowerPC boards. + +Buildman does not store intermediate object files. It optionally copies +the binary output into a directory when a build is successful. Size +information is always recorded. It needs a fair bit of disk space to work, +typically 250MB per thread. + + +Setting up +========== + +1. Get the U-Boot source. You probably already have it, but if not these +steps should get you started with a repo and some commits for testing. + +$ cd /path/to/u-boot +$ git clone git://git.denx.de/u-boot.git . +$ git checkout -b my-branch origin/master +$ # Add some commits to the branch, reading for testing + +2. Create ~/.buildman to tell buildman where to find tool chains. As an +example: + +# Buildman settings file + +[toolchain] +root: / +rest: /toolchains/* +eldk: /opt/eldk-4.2 + +[toolchain-alias] +x86: i386 +blackfin: bfin +sh: sh4 +nds32: nds32le +openrisc: or32 + + +This selects the available toolchain paths. Add the base directory for +each of your toolchains here. Buildman will search inside these directories +and also in any '/usr' and '/usr/bin' subdirectories. + +Make sure the tags (here root: rest: and eldk:) are unique. + +The toolchain-alias section indicates that the i386 toolchain should be used +to build x86 commits. + + +2. Check the available toolchains + +Run this check to make sure that you have a toolchain for every architecture. + +$ ./tools/buildman/buildman --list-tool-chains +Scanning for tool chains + - scanning path '/' + - looking in '/.' + - looking in '/bin' + - looking in '/usr/bin' + - found '/usr/bin/gcc' +Tool chain test: OK + - found '/usr/bin/c89-gcc' +Tool chain test: OK + - found '/usr/bin/c99-gcc' +Tool chain test: OK + - found '/usr/bin/x86_64-linux-gnu-gcc' +Tool chain test: OK + - scanning path '/toolchains/powerpc-linux' + - looking in '/toolchains/powerpc-linux/.' + - looking in '/toolchains/powerpc-linux/bin' + - found '/toolchains/powerpc-linux/bin/powerpc-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/powerpc-linux/usr/bin' + - scanning path '/toolchains/nds32le-linux-glibc-v1f' + - looking in '/toolchains/nds32le-linux-glibc-v1f/.' + - looking in '/toolchains/nds32le-linux-glibc-v1f/bin' + - found '/toolchains/nds32le-linux-glibc-v1f/bin/nds32le-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/nds32le-linux-glibc-v1f/usr/bin' + - scanning path '/toolchains/nios2' + - looking in '/toolchains/nios2/.' + - looking in '/toolchains/nios2/bin' + - found '/toolchains/nios2/bin/nios2-linux-gcc' +Tool chain test: OK + - found '/toolchains/nios2/bin/nios2-linux-uclibc-gcc' +Tool chain test: OK + - looking in '/toolchains/nios2/usr/bin' + - found '/toolchains/nios2/usr/bin/nios2-linux-gcc' +Tool chain test: OK + - found '/toolchains/nios2/usr/bin/nios2-linux-uclibc-gcc' +Tool chain test: OK + - scanning path '/toolchains/microblaze-unknown-linux-gnu' + - looking in '/toolchains/microblaze-unknown-linux-gnu/.' + - looking in '/toolchains/microblaze-unknown-linux-gnu/bin' + - found '/toolchains/microblaze-unknown-linux-gnu/bin/microblaze-unknown-linux-gnu-gcc' +Tool chain test: OK + - found '/toolchains/microblaze-unknown-linux-gnu/bin/mb-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/microblaze-unknown-linux-gnu/usr/bin' + - scanning path '/toolchains/mips-linux' + - looking in '/toolchains/mips-linux/.' + - looking in '/toolchains/mips-linux/bin' + - found '/toolchains/mips-linux/bin/mips-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/mips-linux/usr/bin' + - scanning path '/toolchains/old' + - looking in '/toolchains/old/.' + - looking in '/toolchains/old/bin' + - looking in '/toolchains/old/usr/bin' + - scanning path '/toolchains/i386-linux' + - looking in '/toolchains/i386-linux/.' + - looking in '/toolchains/i386-linux/bin' + - found '/toolchains/i386-linux/bin/i386-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/i386-linux/usr/bin' + - scanning path '/toolchains/bfin-uclinux' + - looking in '/toolchains/bfin-uclinux/.' + - looking in '/toolchains/bfin-uclinux/bin' + - found '/toolchains/bfin-uclinux/bin/bfin-uclinux-gcc' +Tool chain test: OK + - looking in '/toolchains/bfin-uclinux/usr/bin' + - scanning path '/toolchains/sparc-elf' + - looking in '/toolchains/sparc-elf/.' + - looking in '/toolchains/sparc-elf/bin' + - found '/toolchains/sparc-elf/bin/sparc-elf-gcc' +Tool chain test: OK + - looking in '/toolchains/sparc-elf/usr/bin' + - scanning path '/toolchains/arm-2010q1' + - looking in '/toolchains/arm-2010q1/.' + - looking in '/toolchains/arm-2010q1/bin' + - found '/toolchains/arm-2010q1/bin/arm-none-linux-gnueabi-gcc' +Tool chain test: OK + - looking in '/toolchains/arm-2010q1/usr/bin' + - scanning path '/toolchains/from' + - looking in '/toolchains/from/.' + - looking in '/toolchains/from/bin' + - looking in '/toolchains/from/usr/bin' + - scanning path '/toolchains/sh4-gentoo-linux-gnu' + - looking in '/toolchains/sh4-gentoo-linux-gnu/.' + - looking in '/toolchains/sh4-gentoo-linux-gnu/bin' + - found '/toolchains/sh4-gentoo-linux-gnu/bin/sh4-gentoo-linux-gnu-gcc' +Tool chain test: OK + - looking in '/toolchains/sh4-gentoo-linux-gnu/usr/bin' + - scanning path '/toolchains/avr32-linux' + - looking in '/toolchains/avr32-linux/.' + - looking in '/toolchains/avr32-linux/bin' + - found '/toolchains/avr32-linux/bin/avr32-gcc' +Tool chain test: OK + - looking in '/toolchains/avr32-linux/usr/bin' + - scanning path '/toolchains/m68k-linux' + - looking in '/toolchains/m68k-linux/.' + - looking in '/toolchains/m68k-linux/bin' + - found '/toolchains/m68k-linux/bin/m68k-linux-gcc' +Tool chain test: OK + - looking in '/toolchains/m68k-linux/usr/bin' +List of available toolchains (17): +arm : /toolchains/arm-2010q1/bin/arm-none-linux-gnueabi-gcc +avr32 : /toolchains/avr32-linux/bin/avr32-gcc +bfin : /toolchains/bfin-uclinux/bin/bfin-uclinux-gcc +c89 : /usr/bin/c89-gcc +c99 : /usr/bin/c99-gcc +i386 : /toolchains/i386-linux/bin/i386-linux-gcc +m68k : /toolchains/m68k-linux/bin/m68k-linux-gcc +mb : /toolchains/microblaze-unknown-linux-gnu/bin/mb-linux-gcc +microblaze: /toolchains/microblaze-unknown-linux-gnu/bin/microblaze-unknown-linux-gnu-gcc +mips : /toolchains/mips-linux/bin/mips-linux-gcc +nds32le : /toolchains/nds32le-linux-glibc-v1f/bin/nds32le-linux-gcc +nios2 : /toolchains/nios2/bin/nios2-linux-gcc +powerpc : /toolchains/powerpc-linux/bin/powerpc-linux-gcc +sandbox : /usr/bin/gcc +sh4 : /toolchains/sh4-gentoo-linux-gnu/bin/sh4-gentoo-linux-gnu-gcc +sparc : /toolchains/sparc-elf/bin/sparc-elf-gcc +x86_64 : /usr/bin/x86_64-linux-gnu-gcc + + +You can see that everything is covered, even some strange ones that won't +be used (c88 and c99). This is a feature. + + +How to run it +============= + +First do a dry run using the -n flag: (replace <branch> with a real, local +branch with a valid upstream) + +$ ./tools/buildman/buildman -b <branch> -n + +If it can't detect the upstream branch, try checking out the branch, and +doing something like 'git branch --set-upstream <branch> upstream/master' +or something similar. + +As an exmmple: + +Dry run, so not doing much. But I would do this: + +Building 18 commits for 1059 boards (4 threads, 1 job per thread) +Build directory: ../lcd9b + 5bb3505 Merge branch 'master' of git://git.denx.de/u-boot-arm + c18f1b4 tegra: Use const for pinmux_config_pingroup/table() + 2f043ae tegra: Add display support to funcmux + e349900 tegra: fdt: Add pwm binding and node + 424a5f0 tegra: fdt: Add LCD definitions for Tegra + 0636ccf tegra: Add support for PWM + a994fe7 tegra: Add SOC support for display/lcd + fcd7350 tegra: Add LCD driver + 4d46e9d tegra: Add LCD support to Nvidia boards + 991bd48 arm: Add control over cachability of memory regions + 54e8019 lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment + d92aff7 lcd: Add support for flushing LCD fb from dcache after update + dbd0677 tegra: Align LCD frame buffer to section boundary + 0cff9b8 tegra: Support control of cache settings for LCD + 9c56900 tegra: fdt: Add LCD definitions for Seaboard + 5cc29db lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console + cac5a23 tegra: Enable display/lcd support on Seaboard + 49ff541 wip + +Total boards to build for each commit: 1059 + +This shows that it will build all 1059 boards, using 4 threads (because +we have a 4-core CPU). Each thread will run with -j1, meaning that each +make job will use a single CPU. The list of commits to be built helps you +confirm that things look about right. Notice that buildman has chosen a +'base' directory for you, immediately above your source tree. + +Buildman works entirely inside the base directory, here ../lcd9b, +creating a working directory for each thread, and creating output +directories for each commit and board. + + +Suggested Workflow +================== + +To run the build for real, take off the -n: + +$ ./tools/buildman/buildman -b <branch> + +Buildman will set up some working directories, and get started. After a +minute or so it will settle down to a steady pace, with a display like this: + +Building 18 commits for 1059 boards (4 threads, 1 job per thread) + 528 36 124 /19062 1:13:30 : SIMPC8313_SP + +This means that it is building 19062 board/commit combinations. So far it +has managed to succesfully build 528. Another 36 have built with warnings, +and 124 more didn't build at all. Buildman expects to complete the process +in an hour and 15 minutes. Use this time to buy a faster computer. + + +To find out how the build went, ask for a summary with -s. You can do this +either before the build completes (presumably in another terminal) or or +afterwards. Let's work through an example of how this is used: + +$ ./tools/buildman/buildman -b lcd9b -s +... +01: Merge branch 'master' of git://git.denx.de/u-boot-arm + powerpc: + galaxy5200_LOWBOOT +02: tegra: Use const for pinmux_config_pingroup/table() +03: tegra: Add display support to funcmux +04: tegra: fdt: Add pwm binding and node +05: tegra: fdt: Add LCD definitions for Tegra +06: tegra: Add support for PWM +07: tegra: Add SOC support for display/lcd +08: tegra: Add LCD driver +09: tegra: Add LCD support to Nvidia boards +10: arm: Add control over cachability of memory regions +11: lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment +12: lcd: Add support for flushing LCD fb from dcache after update + arm: + lubbock +13: tegra: Align LCD frame buffer to section boundary +14: tegra: Support control of cache settings for LCD +15: tegra: fdt: Add LCD definitions for Seaboard +16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console +17: tegra: Enable display/lcd support on Seaboard +18: wip + +This shows which commits have succeeded and which have failed. In this case +the build is still in progress so many boards are not built yet (use -u to +see which ones). But still we can see a few failures. The galaxy5200_LOWBOOT +never builds correctly. This could be a problem with our toolchain, or it +could be a bug in the upstream. The good news is that we probably don't need +to blame our commits. The bad news is it isn't tested on that board. + +Commit 12 broke lubbock. That's what the '+ lubbock' means. The failure +is never fixed by a later commit, or you would see lubbock again, in green, +without the +. + +To see the actual error: + +$ ./tools/buildman/buildman -b <branch> -se lubbock +... +12: lcd: Add support for flushing LCD fb from dcache after update + arm: + lubbock ++common/libcommon.o: In function `lcd_sync': ++/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range' ++arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2010q1-202) 2.19.51.20090709 assertion fail /scratch/julian/2010q1-release-linux-lite/obj/binutils-src-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12572 ++make: *** [/u-boot/lcd9b/.bm-work/00/build/u-boot] Error 139 +13: tegra: Align LCD frame buffer to section boundary +14: tegra: Support control of cache settings for LCD +15: tegra: fdt: Add LCD definitions for Seaboard +16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console +-/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range' ++/u-boot/lcd9b/.bm-work/00/common/lcd.c:125: undefined reference to `flush_dcache_range' +17: tegra: Enable display/lcd support on Seaboard +18: wip + +So the problem is in lcd.c, due to missing cache operations. This information +should be enough to work out what that commit is doing to break these +boards. (In this case pxa did not have cache operations defined). + +If you see error lines marked with - that means that the errors were fixed +by that commit. Sometimes commits can be in the wrong order, so that a +breakage is introduced for a few commits and fixed by later commits. This +shows up clearly with buildman. You can then reorder the commits and try +again. + +At commit 16, the error moves - you can see that the old error at line 120 +is fixed, but there is a new one at line 126. This is probably only because +we added some code and moved the broken line futher down the file. + +If many boards have the same error, then -e will display the error only +once. This makes the output as concise as possible. + +The full build output in this case is available in: + +../lcd9b/12_of_18_gd92aff7_lcd--Add-support-for/lubbock/ + + done: Indicates the build was done, and holds the return code from make. + This is 0 for a good build, typically 2 for a failure. + + err: Output from stderr, if any. Errors and warnings appear here. + + log: Output from stdout. Normally there isn't any since buildman runs + in silent mode for now. + + toolchain: Shows information about the toolchain used for the build. + + sizes: Shows image size information. + +It is possible to get the build output there also. Use the -k option for +this. In that case you will also see some output files, like: + + System.map toolchain u-boot u-boot.bin u-boot.map autoconf.mk + (also SPL versions u-boot-spl and u-boot-spl.bin if available) + + +Checking Image Sizes +==================== + +A key requirement for U-Boot is that you keep code/data size to a minimum. +Where a new feature increases this noticeably it should normally be put +behind a CONFIG flag so that boards can leave it off and keep the image +size more or less the same with each new release. + +To check the impact of your commits on image size, use -S. For example: + +$ ./tools/buildman/buildman -b us-x86 -sS +Summary of 10 commits for 1066 boards (4 threads, 1 job per thread) +01: MAKEALL: add support for per architecture toolchains +02: x86: Add function to get top of usable ram + x86: (for 1/3 boards) text -272.0 rodata +41.0 +03: x86: Add basic cache operations +04: x86: Permit bootstage and timer data to be used prior to relocation + x86: (for 1/3 boards) data +16.0 +05: x86: Add an __end symbol to signal the end of the U-Boot binary + x86: (for 1/3 boards) text +76.0 +06: x86: Rearrange the output input to remove BSS + x86: (for 1/3 boards) bss -2140.0 +07: x86: Support relocation of FDT on start-up + x86: + coreboot-x86 +08: x86: Add error checking to x86 relocation code +09: x86: Adjust link device tree include file +10: x86: Enable CONFIG_OF_CONTROL on coreboot + + +You can see that image size only changed on x86, which is good because this +series is not supposed to change any other board. From commit 7 onwards the +build fails so we don't get code size numbers. The numbers are fractional +because they are an average of all boards for that architecture. The +intention is to allow you to quickly find image size problems introduced by +your commits. + +Note that the 'text' region and 'rodata' are split out. You should add the +two together to get the total read-only size (reported as the first column +in the output from binutil's 'size' utility). + +A useful option is --step which lets you skip some commits. For example +--step 2 will show the image sizes for only every 2nd commit (so it will +compare the image sizes of the 1st, 3rd, 5th... commits). You can also use +--step 0 which will compare only the first and last commits. This is useful +for an overview of how your entire series affects code size. + +You can also use -d to see a detailed size breakdown for each board. This +list is sorted in order from largest growth to largest reduction. + +It is possible to go a little further with the -B option (--bloat). This +shows where U-Boot has bloted, breaking the size change down to the function +level. Example output is below: + +$ ./tools/buildman/buildman -b us-mem4 -sSdB +... +19: Roll crc32 into hash infrastructure + arm: (for 10/10 boards) all -143.4 bss +1.2 data -4.8 rodata -48.2 text -91.6 + paz00 : all +23 bss -4 rodata -29 text +56 + u-boot: add: 1/0, grow: 3/-2 bytes: 168/-104 (64) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + ext4fs_read_file 540 568 +28 + insert_var_value_sub 688 692 +4 + run_list_real 1996 1992 -4 + do_mem_crc 168 68 -100 + trimslice : all -9 bss +16 rodata -29 text +4 + u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + ext4fs_iterate_dir 672 668 -4 + ext4fs_read_file 568 548 -20 + do_mem_crc 168 68 -100 + whistler : all -9 bss +16 rodata -29 text +4 + u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + ext4fs_iterate_dir 672 668 -4 + ext4fs_read_file 568 548 -20 + do_mem_crc 168 68 -100 + seaboard : all -9 bss -28 rodata -29 text +48 + u-boot: add: 1/0, grow: 3/-2 bytes: 160/-104 (56) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + ext4fs_read_file 548 568 +20 + run_list_real 1996 2000 +4 + do_nandboot 760 756 -4 + do_mem_crc 168 68 -100 + colibri_t20_iris: all -9 rodata -29 text +20 + u-boot: add: 1/0, grow: 2/-3 bytes: 140/-112 (28) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + read_abs_bbt 204 208 +4 + do_nandboot 760 756 -4 + ext4fs_read_file 576 568 -8 + do_mem_crc 168 68 -100 + ventana : all -37 bss -12 rodata -29 text +4 + u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + ext4fs_iterate_dir 672 668 -4 + ext4fs_read_file 568 548 -20 + do_mem_crc 168 68 -100 + harmony : all -37 bss -16 rodata -29 text +8 + u-boot: add: 1/0, grow: 2/-3 bytes: 140/-124 (16) + function old new delta + hash_command 80 160 +80 + crc32_wd_buf - 56 +56 + nand_write_oob_syndrome 428 432 +4 + ext4fs_iterate_dir 672 668 -4 + ext4fs_read_file 568 548 -20 + do_mem_crc 168 68 -100 + medcom-wide : all -417 bss +28 data -16 rodata -93 text -336 + u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288) + function old new delta + crc32_wd_buf - 56 +56 + do_fat_read_at 2872 2904 +32 + hash_algo 16 - -16 + do_mem_crc 168 68 -100 + hash_command 420 160 -260 + tec : all -449 bss -4 data -16 rodata -93 text -336 + u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288) + function old new delta + crc32_wd_buf - 56 +56 + do_fat_read_at 2872 2904 +32 + hash_algo 16 - -16 + do_mem_crc 168 68 -100 + hash_command 420 160 -260 + plutux : all -481 bss +16 data -16 rodata -93 text -388 + u-boot: add: 1/-1, grow: 1/-3 bytes: 68/-408 (-340) + function old new delta + crc32_wd_buf - 56 +56 + do_load_serial_bin 1688 1700 +12 + hash_algo 16 - -16 + do_fat_read_at 2904 2872 -32 + do_mem_crc 168 68 -100 + hash_command 420 160 -260 + powerpc: (for 5/5 boards) all +37.4 data -3.2 rodata -41.8 text +82.4 + MPC8610HPCD : all +55 rodata -29 text +84 + u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80) + function old new delta + hash_command - 176 +176 + do_mem_crc 184 88 -96 + MPC8641HPCN : all +55 rodata -29 text +84 + u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80) + function old new delta + hash_command - 176 +176 + do_mem_crc 184 88 -96 + MPC8641HPCN_36BIT: all +55 rodata -29 text +84 + u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80) + function old new delta + hash_command - 176 +176 + do_mem_crc 184 88 -96 + sbc8641d : all +55 rodata -29 text +84 + u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80) + function old new delta + hash_command - 176 +176 + do_mem_crc 184 88 -96 + xpedite517x : all -33 data -16 rodata -93 text +76 + u-boot: add: 1/-1, grow: 0/-1 bytes: 176/-112 (64) + function old new delta + hash_command - 176 +176 + hash_algo 16 - -16 + do_mem_crc 184 88 -96 +... + + +This shows that commit 19 has increased text size for arm (although only one +board was built) and by 96 bytes for powerpc. This increase was offset in both +cases by reductions in rodata and data/bss. + +Shown below the summary lines is the sizes for each board. Below each board +is the sizes for each function. This information starts with: + + add - number of functions added / removed + grow - number of functions which grew / shrunk + bytes - number of bytes of code added to / removed from all functions, + plus the total byte change in brackets + +The change seems to be that hash_command() has increased by more than the +do_mem_crc() function has decreased. The function sizes typically add up to +roughly the text area size, but note that every read-only section except +rodata is included in 'text', so the function total does not exactly +correspond. + +It is common when refactoring code for the rodata to decrease as the text size +increases, and vice versa. + + +Other options +============= + +Buildman has various other command line options. Try --help to see them. + + +TODO +==== + +This has mostly be written in my spare time as a response to my difficulties +in testing large series of patches. Apart from tidying up there is quite a +bit of scope for improvement. Things like better error diffs, easier access +to log files, error display while building. Also it would be nice it buildman +could 'hunt' for problems, perhaps by building a few boards for each arch, +or checking commits for changed files and building only boards which use +those files. + + +Credits +======= + +Thanks to Grant Grundler <grundler@chromium.org> for his ideas for improving +the build speed by building all commits for a board instead of the other +way around. + + + +Simon Glass +sjg@chromium.org +Halloween 2012 +Updated 12-12-12 +Updated 23-02-13 diff --git a/tools/buildman/board.py b/tools/buildman/board.py new file mode 100644 index 0000000000..9f50abadc1 --- /dev/null +++ b/tools/buildman/board.py @@ -0,0 +1,167 @@ +# Copyright (c) 2012 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +class Board: + """A particular board that we can build""" + def __init__(self, target, arch, cpu, board_name, vendor, soc, options): + """Create a new board type. + + Args: + target: Target name (use make <target>_config to configure) + arch: Architecture name (e.g. arm) + cpu: Cpu name (e.g. arm1136) + board_name: Name of board (e.g. integrator) + vendor: Name of vendor (e.g. armltd) + soc: Name of SOC, or '' if none (e.g. mx31) + options: board-specific options (e.g. integratorcp:CM1136) + """ + self.target = target + self.arch = arch + self.cpu = cpu + self.board_name = board_name + self.vendor = vendor + self.soc = soc + self.props = [self.target, self.arch, self.cpu, self.board_name, + self.vendor, self.soc] + self.options = options + self.build_it = False + + +class Boards: + """Manage a list of boards.""" + def __init__(self): + # Use a simple list here, sinc OrderedDict requires Python 2.7 + self._boards = [] + + def AddBoard(self, board): + """Add a new board to the list. + + The board's target member must not already exist in the board list. + + Args: + board: board to add + """ + self._boards.append(board) + + def ReadBoards(self, fname): + """Read a list of boards from a board file. + + Create a board object for each and add it to our _boards list. + + Args: + fname: Filename of boards.cfg file + """ + with open(fname, 'r') as fd: + for line in fd: + if line[0] == '#': + continue + fields = line.split() + if not fields: + continue + for upto in range(len(fields)): + if fields[upto] == '-': + fields[upto] = '' + while len(fields) < 7: + fields.append('') + + board = Board(*fields) + self.AddBoard(board) + + + def GetList(self): + """Return a list of available boards. + + Returns: + List of Board objects + """ + return self._boards + + def GetDict(self): + """Build a dictionary containing all the boards. + + Returns: + Dictionary: + key is board.target + value is board + """ + board_dict = {} + for board in self._boards: + board_dict[board.target] = board + return board_dict + + def GetSelectedDict(self): + """Return a dictionary containing the selected boards + + Returns: + List of Board objects that are marked selected + """ + board_dict = {} + for board in self._boards: + if board.build_it: + board_dict[board.target] = board + return board_dict + + def GetSelected(self): + """Return a list of selected boards + + Returns: + List of Board objects that are marked selected + """ + return [board for board in self._boards if board.build_it] + + def GetSelectedNames(self): + """Return a list of selected boards + + Returns: + List of board names that are marked selected + """ + return [board.target for board in self._boards if board.build_it] + + def SelectBoards(self, args): + """Mark boards selected based on args + + Args: + List of strings specifying boards to include, either named, or + by their target, architecture, cpu, vendor or soc. If empty, all + boards are selected. + + Returns: + Dictionary which holds the number of boards which were selected + due to each argument, arranged by argument. + """ + result = {} + for arg in args: + result[arg] = 0 + result['all'] = 0 + + for board in self._boards: + if args: + for arg in args: + if arg in board.props: + if not board.build_it: + board.build_it = True + result[arg] += 1 + result['all'] += 1 + else: + board.build_it = True + result['all'] += 1 + + return result diff --git a/tools/buildman/bsettings.py b/tools/buildman/bsettings.py new file mode 100644 index 0000000000..7e66c63b4b --- /dev/null +++ b/tools/buildman/bsettings.py @@ -0,0 +1,60 @@ +# Copyright (c) 2012 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +import ConfigParser +import os + + +def Setup(fname=''): + """Set up the buildman settings module by reading config files + + Args: + config_fname: Config filename to read ('' for default) + """ + global settings + global config_fname + + settings = ConfigParser.SafeConfigParser() + config_fname = fname + if config_fname == '': + config_fname = '%s/.buildman' % os.getenv('HOME') + if config_fname: + settings.read(config_fname) + +def GetItems(section): + """Get the items from a section of the config. + + Args: + section: name of section to retrieve + + Returns: + List of (name, value) tuples for the section + """ + try: + return settings.items(section) + except ConfigParser.NoSectionError as e: + print e + print ("Warning: No tool chains - please add a [toolchain] section " + "to your buildman config file %s. See README for details" % + config_fname) + return [] + except: + raise diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py new file mode 100644 index 0000000000..e426442acd --- /dev/null +++ b/tools/buildman/builder.py @@ -0,0 +1,1445 @@ +# Copyright (c) 2013 The Chromium OS Authors. +# +# Bloat-o-meter code used here Copyright 2004 Matt Mackall <mpm@selenic.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +import collections +import errno +from datetime import datetime, timedelta +import glob +import os +import re +import Queue +import shutil +import string +import sys +import threading +import time + +import command +import gitutil +import terminal +import toolchain + + +""" +Theory of Operation + +Please see README for user documentation, and you should be familiar with +that before trying to make sense of this. + +Buildman works by keeping the machine as busy as possible, building different +commits for different boards on multiple CPUs at once. + +The source repo (self.git_dir) contains all the commits to be built. Each +thread works on a single board at a time. It checks out the first commit, +configures it for that board, then builds it. Then it checks out the next +commit and builds it (typically without re-configuring). When it runs out +of commits, it gets another job from the builder and starts again with that +board. + +Clearly the builder threads could work either way - they could check out a +commit and then built it for all boards. Using separate directories for each +commit/board pair they could leave their build product around afterwards +also. + +The intent behind building a single board for multiple commits, is to make +use of incremental builds. Since each commit is built incrementally from +the previous one, builds are faster. Reconfiguring for a different board +removes all intermediate object files. + +Many threads can be working at once, but each has its own working directory. +When a thread finishes a build, it puts the output files into a result +directory. + +The base directory used by buildman is normally '../<branch>', i.e. +a directory higher than the source repository and named after the branch +being built. + +Within the base directory, we have one subdirectory for each commit. Within +that is one subdirectory for each board. Within that is the build output for +that commit/board combination. + +Buildman also create working directories for each thread, in a .bm-work/ +subdirectory in the base dir. + +As an example, say we are building branch 'us-net' for boards 'sandbox' and +'seaboard', and say that us-net has two commits. We will have directories +like this: + +us-net/ base directory + 01_of_02_g4ed4ebc_net--Add-tftp-speed-/ + sandbox/ + u-boot.bin + seaboard/ + u-boot.bin + 02_of_02_g4ed4ebc_net--Check-tftp-comp/ + sandbox/ + u-boot.bin + seaboard/ + u-boot.bin + .bm-work/ + 00/ working directory for thread 0 (contains source checkout) + build/ build output + 01/ working directory for thread 1 + build/ build output + ... +u-boot/ source directory + .git/ repository +""" + +# Possible build outcomes +OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4) + +# Translate a commit subject into a valid filename +trans_valid_chars = string.maketrans("/: ", "---") + + +def Mkdir(dirname): + """Make a directory if it doesn't already exist. + + Args: + dirname: Directory to create + """ + try: + os.mkdir(dirname) + except OSError as err: + if err.errno == errno.EEXIST: + pass + else: + raise + +class BuilderJob: + """Holds information about a job to be performed by a thread + + Members: + board: Board object to build + commits: List of commit options to build. + """ + def __init__(self): + self.board = None + self.commits = [] + + +class ResultThread(threading.Thread): + """This thread processes results from builder threads. + + It simply passes the results on to the builder. There is only one + result thread, and this helps to serialise the build output. + """ + def __init__(self, builder): + """Set up a new result thread + + Args: + builder: Builder which will be sent each result + """ + threading.Thread.__init__(self) + self.builder = builder + + def run(self): + """Called to start up the result thread. + + We collect the next result job and pass it on to the build. + """ + while True: + result = self.builder.out_queue.get() + self.builder.ProcessResult(result) + self.builder.out_queue.task_done() + + +class BuilderThread(threading.Thread): + """This thread builds U-Boot for a particular board. + + An input queue provides each new job. We run 'make' to build U-Boot + and then pass the results on to the output queue. + + Members: + builder: The builder which contains information we might need + thread_num: Our thread number (0-n-1), used to decide on a + temporary directory + """ + def __init__(self, builder, thread_num): + """Set up a new builder thread""" + threading.Thread.__init__(self) + self.builder = builder + self.thread_num = thread_num + + def Make(self, commit, brd, stage, cwd, *args, **kwargs): + """Run 'make' on a particular commit and board. + + The source code will already be checked out, so the 'commit' + argument is only for information. + + Args: + commit: Commit object that is being built + brd: Board object that is being built + stage: Stage of the build. Valid stages are: + distclean - can be called to clean source + config - called to configure for a board + build - the main make invocation - it does the build + args: A list of arguments to pass to 'make' + kwargs: A list of keyword arguments to pass to command.RunPipe() + + Returns: + CommandResult object + """ + return self.builder.do_make(commit, brd, stage, cwd, *args, + **kwargs) + + def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build): + """Build a particular commit. + + If the build is already done, and we are not forcing a build, we skip + the build and just return the previously-saved results. + + Args: + commit_upto: Commit number to build (0...n-1) + brd: Board object to build + work_dir: Directory to which the source will be checked out + do_config: True to run a make <board>_config on the source + force_build: Force a build even if one was previously done + + Returns: + tuple containing: + - CommandResult object containing the results of the build + - boolean indicating whether 'make config' is still needed + """ + # Create a default result - it will be overwritte by the call to + # self.Make() below, in the event that we do a build. + result = command.CommandResult() + result.return_code = 0 + out_dir = os.path.join(work_dir, 'build') + + # Check if the job was already completed last time + done_file = self.builder.GetDoneFile(commit_upto, brd.target) + result.already_done = os.path.exists(done_file) + if result.already_done and not force_build: + # Get the return code from that build and use it + with open(done_file, 'r') as fd: + result.return_code = int(fd.readline()) + err_file = self.builder.GetErrFile(commit_upto, brd.target) + if os.path.exists(err_file) and os.stat(err_file).st_size: + result.stderr = 'bad' + else: + # We are going to have to build it. First, get a toolchain + if not self.toolchain: + try: + self.toolchain = self.builder.toolchains.Select(brd.arch) + except ValueError as err: + result.return_code = 10 + result.stdout = '' + result.stderr = str(err) + # TODO(sjg@chromium.org): This gets swallowed, but needs + # to be reported. + + if self.toolchain: + # Checkout the right commit + if commit_upto is not None: + commit = self.builder.commits[commit_upto] + if self.builder.checkout: + git_dir = os.path.join(work_dir, '.git') + gitutil.Checkout(commit.hash, git_dir, work_dir, + force=True) + else: + commit = self.builder.commit # Ick, fix this for BuildCommits() + + # Set up the environment and command line + env = self.toolchain.MakeEnvironment() + Mkdir(out_dir) + args = ['O=build', '-s'] + if self.builder.num_jobs is not None: + args.extend(['-j', str(self.builder.num_jobs)]) + config_args = ['%s_config' % brd.target] + config_out = '' + + # If we need to reconfigure, do that now + if do_config: + result = self.Make(commit, brd, 'distclean', work_dir, + 'distclean', *args, env=env) + result = self.Make(commit, brd, 'config', work_dir, + *(args + config_args), env=env) + config_out = result.combined + do_config = False # No need to configure next time + if result.return_code == 0: + result = self.Make(commit, brd, 'build', work_dir, *args, + env=env) + result.stdout = config_out + result.stdout + else: + result.return_code = 1 + result.stderr = 'No tool chain for %s\n' % brd.arch + result.already_done = False + + result.toolchain = self.toolchain + result.brd = brd + result.commit_upto = commit_upto + result.out_dir = out_dir + return result, do_config + + def _WriteResult(self, result, keep_outputs): + """Write a built result to the output directory. + + Args: + result: CommandResult object containing result to write + keep_outputs: True to store the output binaries, False + to delete them + """ + # Fatal error + if result.return_code < 0: + return + + # Aborted? + if result.stderr and 'No child processes' in result.stderr: + return + + if result.already_done: + return + + # Write the output and stderr + output_dir = self.builder._GetOutputDir(result.commit_upto) + Mkdir(output_dir) + build_dir = self.builder.GetBuildDir(result.commit_upto, + result.brd.target) + Mkdir(build_dir) + + outfile = os.path.join(build_dir, 'log') + with open(outfile, 'w') as fd: + if result.stdout: + fd.write(result.stdout) + + errfile = self.builder.GetErrFile(result.commit_upto, + result.brd.target) + if result.stderr: + with open(errfile, 'w') as fd: + fd.write(result.stderr) + elif os.path.exists(errfile): + os.remove(errfile) + + if result.toolchain: + # Write the build result and toolchain information. + done_file = self.builder.GetDoneFile(result.commit_upto, + result.brd.target) + with open(done_file, 'w') as fd: + fd.write('%s' % result.return_code) + with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: + print >>fd, 'gcc', result.toolchain.gcc + print >>fd, 'path', result.toolchain.path + print >>fd, 'cross', result.toolchain.cross + print >>fd, 'arch', result.toolchain.arch + fd.write('%s' % result.return_code) + + with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: + print >>fd, 'gcc', result.toolchain.gcc + print >>fd, 'path', result.toolchain.path + + # Write out the image and function size information and an objdump + env = result.toolchain.MakeEnvironment() + lines = [] + for fname in ['u-boot', 'spl/u-boot-spl']: + cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname] + nm_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + if nm_result.stdout: + nm = self.builder.GetFuncSizesFile(result.commit_upto, + result.brd.target, fname) + with open(nm, 'w') as fd: + print >>fd, nm_result.stdout, + + cmd = ['%sobjdump' % self.toolchain.cross, '-h', fname] + dump_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + rodata_size = '' + if dump_result.stdout: + objdump = self.builder.GetObjdumpFile(result.commit_upto, + result.brd.target, fname) + with open(objdump, 'w') as fd: + print >>fd, dump_result.stdout, + for line in dump_result.stdout.splitlines(): + fields = line.split() + if len(fields) > 5 and fields[1] == '.rodata': + rodata_size = fields[2] + + cmd = ['%ssize' % self.toolchain.cross, fname] + size_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + if size_result.stdout: + lines.append(size_result.stdout.splitlines()[1] + ' ' + + rodata_size) + + # Write out the image sizes file. This is similar to the output + # of binutil's 'size' utility, but it omits the header line and + # adds an additional hex value at the end of each line for the + # rodata size + if len(lines): + sizes = self.builder.GetSizesFile(result.commit_upto, + result.brd.target) + with open(sizes, 'w') as fd: + print >>fd, '\n'.join(lines) + + # Now write the actual build output + if keep_outputs: + patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map', + 'include/autoconf.mk', 'spl/u-boot-spl', + 'spl/u-boot-spl.bin'] + for pattern in patterns: + file_list = glob.glob(os.path.join(result.out_dir, pattern)) + for fname in file_list: + shutil.copy(fname, build_dir) + + + def RunJob(self, job): + """Run a single job + + A job consists of a building a list of commits for a particular board. + + Args: + job: Job to build + """ + brd = job.board + work_dir = self.builder.GetThreadDir(self.thread_num) + self.toolchain = None + if job.commits: + # Run 'make board_config' on the first commit + do_config = True + commit_upto = 0 + force_build = False + for commit_upto in range(0, len(job.commits), job.step): + result, request_config = self.RunCommit(commit_upto, brd, + work_dir, do_config, + force_build or self.builder.force_build) + failed = result.return_code or result.stderr + if failed and not do_config: + # If our incremental build failed, try building again + # with a reconfig. + if self.builder.force_config_on_failure: + result, request_config = self.RunCommit(commit_upto, + brd, work_dir, True, True) + do_config = request_config + + # If we built that commit, then config is done. But if we got + # an warning, reconfig next time to force it to build the same + # files that created warnings this time. Otherwise an + # incremental build may not build the same file, and we will + # think that the warning has gone away. + # We could avoid this by using -Werror everywhere... + # For errors, the problem doesn't happen, since presumably + # the build stopped and didn't generate output, so will retry + # that file next time. So we could detect warnings and deal + # with them specially here. For now, we just reconfigure if + # anything goes work. + # Of course this is substantially slower if there are build + # errors/warnings (e.g. 2-3x slower even if only 10% of builds + # have problems). + if (failed and not result.already_done and not do_config and + self.builder.force_config_on_failure): + # If this build failed, try the next one with a + # reconfigure. + # Sometimes if the board_config.h file changes it can mess + # with dependencies, and we get: + # make: *** No rule to make target `include/autoconf.mk', + # needed by `depend'. + do_config = True + force_build = True + else: + force_build = False + if self.builder.force_config_on_failure: + if failed: + do_config = True + result.commit_upto = commit_upto + if result.return_code < 0: + raise ValueError('Interrupt') + + # We have the build results, so output the result + self._WriteResult(result, job.keep_outputs) + self.builder.out_queue.put(result) + else: + # Just build the currently checked-out build + result = self.RunCommit(None, True) + result.commit_upto = self.builder.upto + self.builder.out_queue.put(result) + + def run(self): + """Our thread's run function + + This thread picks a job from the queue, runs it, and then goes to the + next job. + """ + alive = True + while True: + job = self.builder.queue.get() + try: + if self.builder.active and alive: + self.RunJob(job) + except Exception as err: + alive = False + print err + self.builder.queue.task_done() + + +class Builder: + """Class for building U-Boot for a particular commit. + + Public members: (many should ->private) + active: True if the builder is active and has not been stopped + already_done: Number of builds already completed + base_dir: Base directory to use for builder + checkout: True to check out source, False to skip that step. + This is used for testing. + col: terminal.Color() object + count: Number of commits to build + do_make: Method to call to invoke Make + fail: Number of builds that failed due to error + force_build: Force building even if a build already exists + force_config_on_failure: If a commit fails for a board, disable + incremental building for the next commit we build for that + board, so that we will see all warnings/errors again. + git_dir: Git directory containing source repository + last_line_len: Length of the last line we printed (used for erasing + it with new progress information) + num_jobs: Number of jobs to run at once (passed to make as -j) + num_threads: Number of builder threads to run + out_queue: Queue of results to process + re_make_err: Compiled regular expression for ignore_lines + queue: Queue of jobs to run + threads: List of active threads + toolchains: Toolchains object to use for building + upto: Current commit number we are building (0.count-1) + warned: Number of builds that produced at least one warning + + Private members: + _base_board_dict: Last-summarised Dict of boards + _base_err_lines: Last-summarised list of errors + _build_period_us: Time taken for a single build (float object). + _complete_delay: Expected delay until completion (timedelta) + _next_delay_update: Next time we plan to display a progress update + (datatime) + _show_unknown: Show unknown boards (those not built) in summary + _timestamps: List of timestamps for the completion of the last + last _timestamp_count builds. Each is a datetime object. + _timestamp_count: Number of timestamps to keep in our list. + _working_dir: Base working directory containing all threads + """ + class Outcome: + """Records a build outcome for a single make invocation + + Public Members: + rc: Outcome value (OUTCOME_...) + err_lines: List of error lines or [] if none + sizes: Dictionary of image size information, keyed by filename + - Each value is itself a dictionary containing + values for 'text', 'data' and 'bss', being the integer + size in bytes of each section. + func_sizes: Dictionary keyed by filename - e.g. 'u-boot'. Each + value is itself a dictionary: + key: function name + value: Size of function in bytes + """ + def __init__(self, rc, err_lines, sizes, func_sizes): + self.rc = rc + self.err_lines = err_lines + self.sizes = sizes + self.func_sizes = func_sizes + + def __init__(self, toolchains, base_dir, git_dir, num_threads, num_jobs, + checkout=True, show_unknown=True, step=1): + """Create a new Builder object + + Args: + toolchains: Toolchains object to use for building + base_dir: Base directory to use for builder + git_dir: Git directory containing source repository + num_threads: Number of builder threads to run + num_jobs: Number of jobs to run at once (passed to make as -j) + checkout: True to check out source, False to skip that step. + This is used for testing. + show_unknown: Show unknown boards (those not built) in summary + step: 1 to process every commit, n to process every nth commit + """ + self.toolchains = toolchains + self.base_dir = base_dir + self._working_dir = os.path.join(base_dir, '.bm-work') + self.threads = [] + self.active = True + self.do_make = self.Make + self.checkout = checkout + self.num_threads = num_threads + self.num_jobs = num_jobs + self.already_done = 0 + self.force_build = False + self.git_dir = git_dir + self._show_unknown = show_unknown + self._timestamp_count = 10 + self._build_period_us = None + self._complete_delay = None + self._next_delay_update = datetime.now() + self.force_config_on_failure = True + self._step = step + + self.col = terminal.Color() + + self.queue = Queue.Queue() + self.out_queue = Queue.Queue() + for i in range(self.num_threads): + t = BuilderThread(self, i) + t.setDaemon(True) + t.start() + self.threads.append(t) + + self.last_line_len = 0 + t = ResultThread(self) + t.setDaemon(True) + t.start() + self.threads.append(t) + + ignore_lines = ['(make.*Waiting for unfinished)', '(Segmentation fault)'] + self.re_make_err = re.compile('|'.join(ignore_lines)) + + def __del__(self): + """Get rid of all threads created by the builder""" + for t in self.threads: + del t + + def _AddTimestamp(self): + """Add a new timestamp to the list and record the build period. + + The build period is the length of time taken to perform a single + build (one board, one commit). + """ + now = datetime.now() + self._timestamps.append(now) + count = len(self._timestamps) + delta = self._timestamps[-1] - self._timestamps[0] + seconds = delta.total_seconds() + + # If we have enough data, estimate build period (time taken for a + # single build) and therefore completion time. + if count > 1 and self._next_delay_update < now: + self._next_delay_update = now + timedelta(seconds=2) + if seconds > 0: + self._build_period = float(seconds) / count + todo = self.count - self.upto + self._complete_delay = timedelta(microseconds= + self._build_period * todo * 1000000) + # Round it + self._complete_delay -= timedelta( + microseconds=self._complete_delay.microseconds) + + if seconds > 60: + self._timestamps.popleft() + count -= 1 + + def ClearLine(self, length): + """Clear any characters on the current line + + Make way for a new line of length 'length', by outputting enough + spaces to clear out the old line. Then remember the new length for + next time. + + Args: + length: Length of new line, in characters + """ + if length < self.last_line_len: + print ' ' * (self.last_line_len - length), + print '\r', + self.last_line_len = length + sys.stdout.flush() + + def SelectCommit(self, commit, checkout=True): + """Checkout the selected commit for this build + """ + self.commit = commit + if checkout and self.checkout: + gitutil.Checkout(commit.hash) + + def Make(self, commit, brd, stage, cwd, *args, **kwargs): + """Run make + + Args: + commit: Commit object that is being built + brd: Board object that is being built + stage: Stage that we are at (distclean, config, build) + cwd: Directory where make should be run + args: Arguments to pass to make + kwargs: Arguments to pass to command.RunPipe() + """ + cmd = ['make'] + list(args) + result = command.RunPipe([cmd], capture=True, capture_stderr=True, + cwd=cwd, raise_on_error=False, **kwargs) + return result + + def ProcessResult(self, result): + """Process the result of a build, showing progress information + + Args: + result: A CommandResult object + """ + col = terminal.Color() + if result: + target = result.brd.target + + if result.return_code < 0: + self.active = False + command.StopAll() + return + + self.upto += 1 + if result.return_code != 0: + self.fail += 1 + elif result.stderr: + self.warned += 1 + if result.already_done: + self.already_done += 1 + else: + target = '(starting)' + + # Display separate counts for ok, warned and fail + ok = self.upto - self.warned - self.fail + line = '\r' + self.col.Color(self.col.GREEN, '%5d' % ok) + line += self.col.Color(self.col.YELLOW, '%5d' % self.warned) + line += self.col.Color(self.col.RED, '%5d' % self.fail) + + name = ' /%-5d ' % self.count + + # Add our current completion time estimate + self._AddTimestamp() + if self._complete_delay: + name += '%s : ' % self._complete_delay + # When building all boards for a commit, we can print a commit + # progress message. + if result and result.commit_upto is None: + name += 'commit %2d/%-3d' % (self.commit_upto + 1, + self.commit_count) + + name += target + print line + name, + length = 13 + len(name) + self.ClearLine(length) + + def _GetOutputDir(self, commit_upto): + """Get the name of the output directory for a commit number + + The output directory is typically .../<branch>/<commit>. + + Args: + commit_upto: Commit number to use (0..self.count-1) + """ + commit = self.commits[commit_upto] + subject = commit.subject.translate(trans_valid_chars) + commit_dir = ('%02d_of_%02d_g%s_%s' % (commit_upto + 1, + self.commit_count, commit.hash, subject[:20])) + output_dir = os.path.join(self.base_dir, commit_dir) + return output_dir + + def GetBuildDir(self, commit_upto, target): + """Get the name of the build directory for a commit number + + The build directory is typically .../<branch>/<commit>/<target>. + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + """ + output_dir = self._GetOutputDir(commit_upto) + return os.path.join(output_dir, target) + + def GetDoneFile(self, commit_upto, target): + """Get the name of the done file for a commit number + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + """ + return os.path.join(self.GetBuildDir(commit_upto, target), 'done') + + def GetSizesFile(self, commit_upto, target): + """Get the name of the sizes file for a commit number + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + """ + return os.path.join(self.GetBuildDir(commit_upto, target), 'sizes') + + def GetFuncSizesFile(self, commit_upto, target, elf_fname): + """Get the name of the funcsizes file for a commit number and ELF file + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + elf_fname: Filename of elf image + """ + return os.path.join(self.GetBuildDir(commit_upto, target), + '%s.sizes' % elf_fname.replace('/', '-')) + + def GetObjdumpFile(self, commit_upto, target, elf_fname): + """Get the name of the objdump file for a commit number and ELF file + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + elf_fname: Filename of elf image + """ + return os.path.join(self.GetBuildDir(commit_upto, target), + '%s.objdump' % elf_fname.replace('/', '-')) + + def GetErrFile(self, commit_upto, target): + """Get the name of the err file for a commit number + + Args: + commit_upto: Commit number to use (0..self.count-1) + target: Target name + """ + output_dir = self.GetBuildDir(commit_upto, target) + return os.path.join(output_dir, 'err') + + def FilterErrors(self, lines): + """Filter out errors in which we have no interest + + We should probably use map(). + + Args: + lines: List of error lines, each a string + Returns: + New list with only interesting lines included + """ + out_lines = [] + for line in lines: + if not self.re_make_err.search(line): + out_lines.append(line) + return out_lines + + def ReadFuncSizes(self, fname, fd): + """Read function sizes from the output of 'nm' + + Args: + fd: File containing data to read + fname: Filename we are reading from (just for errors) + + Returns: + Dictionary containing size of each function in bytes, indexed by + function name. + """ + sym = {} + for line in fd.readlines(): + try: + size, type, name = line[:-1].split() + except: + print "Invalid line in file '%s': '%s'" % (fname, line[:-1]) + continue + if type in 'tTdDbB': + # function names begin with '.' on 64-bit powerpc + if '.' in name[1:]: + name = 'static.' + name.split('.')[0] + sym[name] = sym.get(name, 0) + int(size, 16) + return sym + + def GetBuildOutcome(self, commit_upto, target, read_func_sizes): + """Work out the outcome of a build. + + Args: + commit_upto: Commit number to check (0..n-1) + target: Target board to check + read_func_sizes: True to read function size information + + Returns: + Outcome object + """ + done_file = self.GetDoneFile(commit_upto, target) + sizes_file = self.GetSizesFile(commit_upto, target) + sizes = {} + func_sizes = {} + if os.path.exists(done_file): + with open(done_file, 'r') as fd: + return_code = int(fd.readline()) + err_lines = [] + err_file = self.GetErrFile(commit_upto, target) + if os.path.exists(err_file): + with open(err_file, 'r') as fd: + err_lines = self.FilterErrors(fd.readlines()) + + # Decide whether the build was ok, failed or created warnings + if return_code: + rc = OUTCOME_ERROR + elif len(err_lines): + rc = OUTCOME_WARNING + else: + rc = OUTCOME_OK + + # Convert size information to our simple format + if os.path.exists(sizes_file): + with open(sizes_file, 'r') as fd: + for line in fd.readlines(): + values = line.split() + rodata = 0 + if len(values) > 6: + rodata = int(values[6], 16) + size_dict = { + 'all' : int(values[0]) + int(values[1]) + + int(values[2]), + 'text' : int(values[0]) - rodata, + 'data' : int(values[1]), + 'bss' : int(values[2]), + 'rodata' : rodata, + } + sizes[values[5]] = size_dict + + if read_func_sizes: + pattern = self.GetFuncSizesFile(commit_upto, target, '*') + for fname in glob.glob(pattern): + with open(fname, 'r') as fd: + dict_name = os.path.basename(fname).replace('.sizes', + '') + func_sizes[dict_name] = self.ReadFuncSizes(fname, fd) + + return Builder.Outcome(rc, err_lines, sizes, func_sizes) + + return Builder.Outcome(OUTCOME_UNKNOWN, [], {}, {}) + + def GetResultSummary(self, boards_selected, commit_upto, read_func_sizes): + """Calculate a summary of the results of building a commit. + + Args: + board_selected: Dict containing boards to summarise + commit_upto: Commit number to summarize (0..self.count-1) + read_func_sizes: True to read function size information + + Returns: + Tuple: + Dict containing boards which passed building this commit. + keyed by board.target + List containing a summary of error/warning lines + """ + board_dict = {} + err_lines_summary = [] + + for board in boards_selected.itervalues(): + outcome = self.GetBuildOutcome(commit_upto, board.target, + read_func_sizes) + board_dict[board.target] = outcome + for err in outcome.err_lines: + if err and not err.rstrip() in err_lines_summary: + err_lines_summary.append(err.rstrip()) + return board_dict, err_lines_summary + + def AddOutcome(self, board_dict, arch_list, changes, char, color): + """Add an output to our list of outcomes for each architecture + + This simple function adds failing boards (changes) to the + relevant architecture string, so we can print the results out + sorted by architecture. + + Args: + board_dict: Dict containing all boards + arch_list: Dict keyed by arch name. Value is a string containing + a list of board names which failed for that arch. + changes: List of boards to add to arch_list + color: terminal.Colour object + """ + done_arch = {} + for target in changes: + if target in board_dict: + arch = board_dict[target].arch + else: + arch = 'unknown' + str = self.col.Color(color, ' ' + target) + if not arch in done_arch: + str = self.col.Color(color, char) + ' ' + str + done_arch[arch] = True + if not arch in arch_list: + arch_list[arch] = str + else: + arch_list[arch] += str + + + def ColourNum(self, num): + color = self.col.RED if num > 0 else self.col.GREEN + if num == 0: + return '0' + return self.col.Color(color, str(num)) + + def ResetResultSummary(self, board_selected): + """Reset the results summary ready for use. + + Set up the base board list to be all those selected, and set the + error lines to empty. + + Following this, calls to PrintResultSummary() will use this + information to work out what has changed. + + Args: + board_selected: Dict containing boards to summarise, keyed by + board.target + """ + self._base_board_dict = {} + for board in board_selected: + self._base_board_dict[board] = Builder.Outcome(0, [], [], {}) + self._base_err_lines = [] + + def PrintFuncSizeDetail(self, fname, old, new): + grow, shrink, add, remove, up, down = 0, 0, 0, 0, 0, 0 + delta, common = [], {} + + for a in old: + if a in new: + common[a] = 1 + + for name in old: + if name not in common: + remove += 1 + down += old[name] + delta.append([-old[name], name]) + + for name in new: + if name not in common: + add += 1 + up += new[name] + delta.append([new[name], name]) + + for name in common: + diff = new.get(name, 0) - old.get(name, 0) + if diff > 0: + grow, up = grow + 1, up + diff + elif diff < 0: + shrink, down = shrink + 1, down - diff + delta.append([diff, name]) + + delta.sort() + delta.reverse() + + args = [add, -remove, grow, -shrink, up, -down, up - down] + if max(args) == 0: + return + args = [self.ColourNum(x) for x in args] + indent = ' ' * 15 + print ('%s%s: add: %s/%s, grow: %s/%s bytes: %s/%s (%s)' % + tuple([indent, self.col.Color(self.col.YELLOW, fname)] + args)) + print '%s %-38s %7s %7s %+7s' % (indent, 'function', 'old', 'new', + 'delta') + for diff, name in delta: + if diff: + color = self.col.RED if diff > 0 else self.col.GREEN + msg = '%s %-38s %7s %7s %+7d' % (indent, name, + old.get(name, '-'), new.get(name,'-'), diff) + print self.col.Color(color, msg) + + + def PrintSizeDetail(self, target_list, show_bloat): + """Show details size information for each board + + Args: + target_list: List of targets, each a dict containing: + 'target': Target name + 'total_diff': Total difference in bytes across all areas + <part_name>: Difference for that part + show_bloat: Show detail for each function + """ + targets_by_diff = sorted(target_list, reverse=True, + key=lambda x: x['_total_diff']) + for result in targets_by_diff: + printed_target = False + for name in sorted(result): + diff = result[name] + if name.startswith('_'): + continue + if diff != 0: + color = self.col.RED if diff > 0 else self.col.GREEN + msg = ' %s %+d' % (name, diff) + if not printed_target: + print '%10s %-15s:' % ('', result['_target']), + printed_target = True + print self.col.Color(color, msg), + if printed_target: + print + if show_bloat: + target = result['_target'] + outcome = result['_outcome'] + base_outcome = self._base_board_dict[target] + for fname in outcome.func_sizes: + self.PrintFuncSizeDetail(fname, + base_outcome.func_sizes[fname], + outcome.func_sizes[fname]) + + + def PrintSizeSummary(self, board_selected, board_dict, show_detail, + show_bloat): + """Print a summary of image sizes broken down by section. + + The summary takes the form of one line per architecture. The + line contains deltas for each of the sections (+ means the section + got bigger, - means smaller). The nunmbers are the average number + of bytes that a board in this section increased by. + + For example: + powerpc: (622 boards) text -0.0 + arm: (285 boards) text -0.0 + nds32: (3 boards) text -8.0 + + Args: + board_selected: Dict containing boards to summarise, keyed by + board.target + board_dict: Dict containing boards for which we built this + commit, keyed by board.target. The value is an Outcome object. + show_detail: Show detail for each board + show_bloat: Show detail for each function + """ + arch_list = {} + arch_count = {} + + # Calculate changes in size for different image parts + # The previous sizes are in Board.sizes, for each board + for target in board_dict: + if target not in board_selected: + continue + base_sizes = self._base_board_dict[target].sizes + outcome = board_dict[target] + sizes = outcome.sizes + + # Loop through the list of images, creating a dict of size + # changes for each image/part. We end up with something like + # {'target' : 'snapper9g45, 'data' : 5, 'u-boot-spl:text' : -4} + # which means that U-Boot data increased by 5 bytes and SPL + # text decreased by 4. + err = {'_target' : target} + for image in sizes: + if image in base_sizes: + base_image = base_sizes[image] + # Loop through the text, data, bss parts + for part in sorted(sizes[image]): + diff = sizes[image][part] - base_image[part] + col = None + if diff: + if image == 'u-boot': + name = part + else: + name = image + ':' + part + err[name] = diff + arch = board_selected[target].arch + if not arch in arch_count: + arch_count[arch] = 1 + else: + arch_count[arch] += 1 + if not sizes: + pass # Only add to our list when we have some stats + elif not arch in arch_list: + arch_list[arch] = [err] + else: + arch_list[arch].append(err) + + # We now have a list of image size changes sorted by arch + # Print out a summary of these + for arch, target_list in arch_list.iteritems(): + # Get total difference for each type + totals = {} + for result in target_list: + total = 0 + for name, diff in result.iteritems(): + if name.startswith('_'): + continue + total += diff + if name in totals: + totals[name] += diff + else: + totals[name] = diff + result['_total_diff'] = total + result['_outcome'] = board_dict[result['_target']] + + count = len(target_list) + printed_arch = False + for name in sorted(totals): + diff = totals[name] + if diff: + # Display the average difference in this name for this + # architecture + avg_diff = float(diff) / count + color = self.col.RED if avg_diff > 0 else self.col.GREEN + msg = ' %s %+1.1f' % (name, avg_diff) + if not printed_arch: + print '%10s: (for %d/%d boards)' % (arch, count, + arch_count[arch]), + printed_arch = True + print self.col.Color(color, msg), + + if printed_arch: + print + if show_detail: + self.PrintSizeDetail(target_list, show_bloat) + + + def PrintResultSummary(self, board_selected, board_dict, err_lines, + show_sizes, show_detail, show_bloat): + """Compare results with the base results and display delta. + + Only boards mentioned in board_selected will be considered. This + function is intended to be called repeatedly with the results of + each commit. It therefore shows a 'diff' between what it saw in + the last call and what it sees now. + + Args: + board_selected: Dict containing boards to summarise, keyed by + board.target + board_dict: Dict containing boards for which we built this + commit, keyed by board.target. The value is an Outcome object. + err_lines: A list of errors for this commit, or [] if there is + none, or we don't want to print errors + show_sizes: Show image size deltas + show_detail: Show detail for each board + show_bloat: Show detail for each function + """ + better = [] # List of boards fixed since last commit + worse = [] # List of new broken boards since last commit + new = [] # List of boards that didn't exist last time + unknown = [] # List of boards that were not built + + for target in board_dict: + if target not in board_selected: + continue + + # If the board was built last time, add its outcome to a list + if target in self._base_board_dict: + base_outcome = self._base_board_dict[target].rc + outcome = board_dict[target] + if outcome.rc == OUTCOME_UNKNOWN: + unknown.append(target) + elif outcome.rc < base_outcome: + better.append(target) + elif outcome.rc > base_outcome: + worse.append(target) + else: + new.append(target) + + # Get a list of errors that have appeared, and disappeared + better_err = [] + worse_err = [] + for line in err_lines: + if line not in self._base_err_lines: + worse_err.append('+' + line) + for line in self._base_err_lines: + if line not in err_lines: + better_err.append('-' + line) + + # Display results by arch + if better or worse or unknown or new or worse_err or better_err: + arch_list = {} + self.AddOutcome(board_selected, arch_list, better, '', + self.col.GREEN) + self.AddOutcome(board_selected, arch_list, worse, '+', + self.col.RED) + self.AddOutcome(board_selected, arch_list, new, '*', self.col.BLUE) + if self._show_unknown: + self.AddOutcome(board_selected, arch_list, unknown, '?', + self.col.MAGENTA) + for arch, target_list in arch_list.iteritems(): + print '%10s: %s' % (arch, target_list) + if better_err: + print self.col.Color(self.col.GREEN, '\n'.join(better_err)) + if worse_err: + print self.col.Color(self.col.RED, '\n'.join(worse_err)) + + if show_sizes: + self.PrintSizeSummary(board_selected, board_dict, show_detail, + show_bloat) + + # Save our updated information for the next call to this function + self._base_board_dict = board_dict + self._base_err_lines = err_lines + + # Get a list of boards that did not get built, if needed + not_built = [] + for board in board_selected: + if not board in board_dict: + not_built.append(board) + if not_built: + print "Boards not built (%d): %s" % (len(not_built), + ', '.join(not_built)) + + + def ShowSummary(self, commits, board_selected, show_errors, show_sizes, + show_detail, show_bloat): + """Show a build summary for U-Boot for a given board list. + + Reset the result summary, then repeatedly call GetResultSummary on + each commit's results, then display the differences we see. + + Args: + commit: Commit objects to summarise + board_selected: Dict containing boards to summarise + show_errors: Show errors that occured + show_sizes: Show size deltas + show_detail: Show detail for each board + show_bloat: Show detail for each function + """ + self.commit_count = len(commits) + self.commits = commits + self.ResetResultSummary(board_selected) + + for commit_upto in range(0, self.commit_count, self._step): + board_dict, err_lines = self.GetResultSummary(board_selected, + commit_upto, read_func_sizes=show_bloat) + msg = '%02d: %s' % (commit_upto + 1, commits[commit_upto].subject) + print self.col.Color(self.col.BLUE, msg) + self.PrintResultSummary(board_selected, board_dict, + err_lines if show_errors else [], show_sizes, show_detail, + show_bloat) + + + def SetupBuild(self, board_selected, commits): + """Set up ready to start a build. + + Args: + board_selected: Selected boards to build + commits: Selected commits to build + """ + # First work out how many commits we will build + count = (len(commits) + self._step - 1) / self._step + self.count = len(board_selected) * count + self.upto = self.warned = self.fail = 0 + self._timestamps = collections.deque() + + def BuildBoardsForCommit(self, board_selected, keep_outputs): + """Build all boards for a single commit""" + self.SetupBuild(board_selected) + self.count = len(board_selected) + for brd in board_selected.itervalues(): + job = BuilderJob() + job.board = brd + job.commits = None + job.keep_outputs = keep_outputs + self.queue.put(brd) + + self.queue.join() + self.out_queue.join() + print + self.ClearLine(0) + + def BuildCommits(self, commits, board_selected, show_errors, keep_outputs): + """Build all boards for all commits (non-incremental)""" + self.commit_count = len(commits) + + self.ResetResultSummary(board_selected) + for self.commit_upto in range(self.commit_count): + self.SelectCommit(commits[self.commit_upto]) + self.SelectOutputDir() + Mkdir(self.output_dir) + + self.BuildBoardsForCommit(board_selected, keep_outputs) + board_dict, err_lines = self.GetResultSummary() + self.PrintResultSummary(board_selected, board_dict, + err_lines if show_errors else []) + + if self.already_done: + print '%d builds already done' % self.already_done + + def GetThreadDir(self, thread_num): + """Get the directory path to the working dir for a thread. + + Args: + thread_num: Number of thread to check. + """ + return os.path.join(self._working_dir, '%02d' % thread_num) + + def _PrepareThread(self, thread_num): + """Prepare the working directory for a thread. + + This clones or fetches the repo into the thread's work directory. + + Args: + thread_num: Thread number (0, 1, ...) + """ + thread_dir = self.GetThreadDir(thread_num) + Mkdir(thread_dir) + git_dir = os.path.join(thread_dir, '.git') + + # Clone the repo if it doesn't already exist + # TODO(sjg@chromium): Perhaps some git hackery to symlink instead, so + # we have a private index but uses the origin repo's contents? + if self.git_dir: + src_dir = os.path.abspath(self.git_dir) + if os.path.exists(git_dir): + gitutil.Fetch(git_dir, thread_dir) + else: + print 'Cloning repo for thread %d' % thread_num + gitutil.Clone(src_dir, thread_dir) + + def _PrepareWorkingSpace(self, max_threads): + """Prepare the working directory for use. + + Set up the git repo for each thread. + + Args: + max_threads: Maximum number of threads we expect to need. + """ + Mkdir(self._working_dir) + for thread in range(max_threads): + self._PrepareThread(thread) + + def _PrepareOutputSpace(self): + """Get the output directories ready to receive files. + + We delete any output directories which look like ones we need to + create. Having left over directories is confusing when the user wants + to check the output manually. + """ + dir_list = [] + for commit_upto in range(self.commit_count): + dir_list.append(self._GetOutputDir(commit_upto)) + + for dirname in glob.glob(os.path.join(self.base_dir, '*')): + if dirname not in dir_list: + shutil.rmtree(dirname) + + def BuildBoards(self, commits, board_selected, show_errors, keep_outputs): + """Build all commits for a list of boards + + Args: + commits: List of commits to be build, each a Commit object + boards_selected: Dict of selected boards, key is target name, + value is Board object + show_errors: True to show summarised error/warning info + keep_outputs: True to save build output files + """ + self.commit_count = len(commits) + self.commits = commits + + self.ResetResultSummary(board_selected) + Mkdir(self.base_dir) + self._PrepareWorkingSpace(min(self.num_threads, len(board_selected))) + self._PrepareOutputSpace() + self.SetupBuild(board_selected, commits) + self.ProcessResult(None) + + # Create jobs to build all commits for each board + for brd in board_selected.itervalues(): + job = BuilderJob() + job.board = brd + job.commits = commits + job.keep_outputs = keep_outputs + job.step = self._step + self.queue.put(job) + + # Wait until all jobs are started + self.queue.join() + + # Wait until we have processed all output + self.out_queue.join() + print + self.ClearLine(0) diff --git a/tools/buildman/buildman b/tools/buildman/buildman new file mode 120000 index 0000000000..e4fba2d4b0 --- /dev/null +++ b/tools/buildman/buildman @@ -0,0 +1 @@ +buildman.py
\ No newline at end of file diff --git a/tools/buildman/buildman.py b/tools/buildman/buildman.py new file mode 100755 index 0000000000..7b05d0fb6e --- /dev/null +++ b/tools/buildman/buildman.py @@ -0,0 +1,126 @@ +#!/usr/bin/python +# +# Copyright (c) 2012 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +"""See README for more information""" + +import multiprocessing +from optparse import OptionParser +import os +import re +import sys +import unittest + +# Bring in the patman libraries +our_path = os.path.dirname(os.path.realpath(__file__)) +sys.path.append(os.path.join(our_path, '../patman')) + +# Our modules +import board +import builder +import checkpatch +import command +import control +import doctest +import gitutil +import patchstream +import terminal +import toolchain + +def RunTests(): + import test + + sys.argv = [sys.argv[0]] + suite = unittest.TestLoader().loadTestsFromTestCase(test.TestBuild) + result = unittest.TestResult() + suite.run(result) + + # TODO: Surely we can just 'print' result? + print result + for test, err in result.errors: + print err + for test, err in result.failures: + print err + + +parser = OptionParser() +parser.add_option('-b', '--branch', type='string', + help='Branch name to build') +parser.add_option('-B', '--bloat', dest='show_bloat', + action='store_true', default=False, + help='Show changes in function code size for each board') +parser.add_option('-c', '--count', dest='count', type='int', + default=-1, help='Run build on the top n commits') +parser.add_option('-e', '--show_errors', action='store_true', + default=False, help='Show errors and warnings') +parser.add_option('-f', '--force-build', dest='force_build', + action='store_true', default=False, + help='Force build of boards even if already built') +parser.add_option('-d', '--detail', dest='show_detail', + action='store_true', default=False, + help='Show detailed information for each board in summary') +parser.add_option('-g', '--git', type='string', + help='Git repo containing branch to build', default='.') +parser.add_option('-H', '--full-help', action='store_true', dest='full_help', + default=False, help='Display the README file') +parser.add_option('-j', '--jobs', dest='jobs', type='int', + default=None, help='Number of jobs to run at once (passed to make)') +parser.add_option('-k', '--keep-outputs', action='store_true', + default=False, help='Keep all build output files (e.g. binaries)') +parser.add_option('--list-tool-chains', action='store_true', default=False, + help='List available tool chains') +parser.add_option('-n', '--dry-run', action='store_true', dest='dry_run', + default=False, help="Do a try run (describe actions, but no nothing)") +parser.add_option('-Q', '--quick', action='store_true', + default=False, help='Do a rough build, with limited warning resolution') +parser.add_option('-s', '--summary', action='store_true', + default=False, help='Show a build summary') +parser.add_option('-S', '--show-sizes', action='store_true', + default=False, help='Show image size variation in summary') +parser.add_option('--step', type='int', + default=1, help='Only build every n commits (0=just first and last)') +parser.add_option('-t', '--test', action='store_true', dest='test', + default=False, help='run tests') +parser.add_option('-T', '--threads', type='int', + default=None, help='Number of builder threads to use') +parser.add_option('-u', '--show_unknown', action='store_true', + default=False, help='Show boards with unknown build result') + +parser.usage = """buildman -b <branch> [options] + +Build U-Boot for all commits in a branch. Use -n to do a dry run""" + +(options, args) = parser.parse_args() + +# Run our meagre tests +if options.test: + RunTests() +elif options.full_help: + pager = os.getenv('PAGER') + if not pager: + pager = 'more' + fname = os.path.join(os.path.dirname(sys.argv[0]), 'README') + command.Run(pager, fname) + +# Build selected commits for selected boards +else: + control.DoBuildman(options, args) diff --git a/tools/buildman/control.py b/tools/buildman/control.py new file mode 100644 index 0000000000..8d7b9b5473 --- /dev/null +++ b/tools/buildman/control.py @@ -0,0 +1,181 @@ +# Copyright (c) 2013 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +import multiprocessing +import os +import sys + +import board +import bsettings +from builder import Builder +import gitutil +import patchstream +import terminal +import toolchain + +def GetPlural(count): + """Returns a plural 's' if count is not 1""" + return 's' if count != 1 else '' + +def GetActionSummary(is_summary, count, selected, options): + """Return a string summarising the intended action. + + Returns: + Summary string. + """ + count = (count + options.step - 1) / options.step + str = '%s %d commit%s for %d boards' % ( + 'Summary of' if is_summary else 'Building', count, GetPlural(count), + len(selected)) + str += ' (%d thread%s, %d job%s per thread)' % (options.threads, + GetPlural(options.threads), options.jobs, GetPlural(options.jobs)) + return str + +def ShowActions(series, why_selected, boards_selected, builder, options): + """Display a list of actions that we would take, if not a dry run. + + Args: + series: Series object + why_selected: Dictionary where each key is a buildman argument + provided by the user, and the value is the boards brought + in by that argument. For example, 'arm' might bring in + 400 boards, so in this case the key would be 'arm' and + the value would be a list of board names. + boards_selected: Dict of selected boards, key is target name, + value is Board object + builder: The builder that will be used to build the commits + options: Command line options object + """ + col = terminal.Color() + print 'Dry run, so not doing much. But I would do this:' + print + print GetActionSummary(False, len(series.commits), boards_selected, + options) + print 'Build directory: %s' % builder.base_dir + for upto in range(0, len(series.commits), options.step): + commit = series.commits[upto] + print ' ', col.Color(col.YELLOW, commit.hash, bright=False), + print commit.subject + print + for arg in why_selected: + if arg != 'all': + print arg, ': %d boards' % why_selected[arg] + print ('Total boards to build for each commit: %d\n' % + why_selected['all']) + +def DoBuildman(options, args): + """The main control code for buildman + + Args: + options: Command line options object + args: Command line arguments (list of strings) + """ + gitutil.Setup() + + bsettings.Setup() + options.git_dir = os.path.join(options.git, '.git') + + toolchains = toolchain.Toolchains() + toolchains.Scan(options.list_tool_chains) + if options.list_tool_chains: + toolchains.List() + print + return + + # Work out how many commits to build. We want to build everything on the + # branch. We also build the upstream commit as a control so we can see + # problems introduced by the first commit on the branch. + col = terminal.Color() + count = options.count + if count == -1: + if not options.branch: + str = 'Please use -b to specify a branch to build' + print col.Color(col.RED, str) + sys.exit(1) + count = gitutil.CountCommitsInBranch(options.git_dir, options.branch) + count += 1 # Build upstream commit also + + if not count: + str = ("No commits found to process in branch '%s': " + "set branch's upstream or use -c flag" % options.branch) + print col.Color(col.RED, str) + sys.exit(1) + + # Work out what subset of the boards we are building + boards = board.Boards() + boards.ReadBoards(os.path.join(options.git, 'boards.cfg')) + why_selected = boards.SelectBoards(args) + selected = boards.GetSelected() + if not len(selected): + print col.Color(col.RED, 'No matching boards found') + sys.exit(1) + + # Read the metadata from the commits. First look at the upstream commit, + # then the ones in the branch. We would like to do something like + # upstream/master~..branch but that isn't possible if upstream/master is + # a merge commit (it will list all the commits that form part of the + # merge) + range_expr = gitutil.GetRangeInBranch(options.git_dir, options.branch) + upstream_commit = gitutil.GetUpstream(options.git_dir, options.branch) + series = patchstream.GetMetaDataForList(upstream_commit, options.git_dir, + 1) + series = patchstream.GetMetaDataForList(range_expr, options.git_dir, None, + series) + + # By default we have one thread per CPU. But if there are not enough jobs + # we can have fewer threads and use a high '-j' value for make. + if not options.threads: + options.threads = min(multiprocessing.cpu_count(), len(selected)) + if not options.jobs: + options.jobs = max(1, (multiprocessing.cpu_count() + + len(selected) - 1) / len(selected)) + + if not options.step: + options.step = len(series.commits) - 1 + + # Create a new builder with the selected options + output_dir = os.path.join('..', options.branch) + builder = Builder(toolchains, output_dir, options.git_dir, + options.threads, options.jobs, checkout=True, + show_unknown=options.show_unknown, step=options.step) + builder.force_config_on_failure = not options.quick + + # For a dry run, just show our actions as a sanity check + if options.dry_run: + ShowActions(series, why_selected, selected, builder, options) + else: + builder.force_build = options.force_build + + # Work out which boards to build + board_selected = boards.GetSelectedDict() + + print GetActionSummary(options.summary, count, board_selected, options) + + if options.summary: + # We can't show function sizes without board details at present + if options.show_bloat: + options.show_detail = True + builder.ShowSummary(series.commits, board_selected, + options.show_errors, options.show_sizes, + options.show_detail, options.show_bloat) + else: + builder.BuildBoards(series.commits, board_selected, + options.show_errors, options.keep_outputs) diff --git a/tools/buildman/test.py b/tools/buildman/test.py new file mode 100644 index 0000000000..9330fa56eb --- /dev/null +++ b/tools/buildman/test.py @@ -0,0 +1,185 @@ +# +# Copyright (c) 2012 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +import os +import shutil +import sys +import tempfile +import time +import unittest + +# Bring in the patman libraries +our_path = os.path.dirname(os.path.realpath(__file__)) +sys.path.append(os.path.join(our_path, '../patman')) + +import board +import bsettings +import builder +import control +import command +import commit +import toolchain + +errors = [ + '''main.c: In function 'main_loop': +main.c:260:6: warning: unused variable 'joe' [-Wunused-variable] +''', + '''main.c: In function 'main_loop': +main.c:295:2: error: 'fred' undeclared (first use in this function) +main.c:295:2: note: each undeclared identifier is reported only once for each function it appears in +make[1]: *** [main.o] Error 1 +make: *** [common/libcommon.o] Error 2 +Make failed +''', + '''main.c: In function 'main_loop': +main.c:280:6: warning: unused variable 'mary' [-Wunused-variable] +''', + '''powerpc-linux-ld: warning: dot moved backwards before `.bss' +powerpc-linux-ld: warning: dot moved backwards before `.bss' +powerpc-linux-ld: u-boot: section .text lma 0xfffc0000 overlaps previous sections +powerpc-linux-ld: u-boot: section .rodata lma 0xfffef3ec overlaps previous sections +powerpc-linux-ld: u-boot: section .reloc lma 0xffffa400 overlaps previous sections +powerpc-linux-ld: u-boot: section .data lma 0xffffcd38 overlaps previous sections +powerpc-linux-ld: u-boot: section .u_boot_cmd lma 0xffffeb40 overlaps previous sections +powerpc-linux-ld: u-boot: section .bootpg lma 0xfffff198 overlaps previous sections +''' +] + + +# hash, subject, return code, list of errors/warnings +commits = [ + ['1234', 'upstream/master, ok', 0, []], + ['5678', 'Second commit, a warning', 0, errors[0:1]], + ['9012', 'Third commit, error', 1, errors[0:2]], + ['3456', 'Fourth commit, warning', 0, [errors[0], errors[2]]], + ['7890', 'Fifth commit, link errors', 1, [errors[0], errors[3]]], + ['abcd', 'Sixth commit, fixes all errors', 0, []] +] + +boards = [ + ['board0', 'arm', 'armv7', 'ARM Board 1', 'Tester', '', ''], + ['board1', 'arm', 'armv7', 'ARM Board 2', 'Tester', '', ''], + ['board2', 'powerpc', 'powerpc', 'PowerPC board 1', 'Tester', '', ''], + ['board3', 'powerpc', 'mpc5xx', 'PowerPC board 2', 'Tester', '', ''], + ['board4', 'sandbox', 'sandbox', 'Sandbox board', 'Tester', '', ''] +] + +class Options: + """Class that holds build options""" + pass + +class TestBuild(unittest.TestCase): + """Test buildman + + TODO: Write tests for the rest of the functionality + """ + def setUp(self): + # Set up commits to build + self.commits = [] + sequence = 0 + for commit_info in commits: + comm = commit.Commit(commit_info[0]) + comm.subject = commit_info[1] + comm.return_code = commit_info[2] + comm.error_list = commit_info[3] + comm.sequence = sequence + sequence += 1 + self.commits.append(comm) + + # Set up boards to build + self.boards = board.Boards() + for brd in boards: + self.boards.AddBoard(board.Board(*brd)) + self.boards.SelectBoards([]) + + # Set up the toolchains + bsettings.Setup() + self.toolchains = toolchain.Toolchains() + self.toolchains.Add('arm-linux-gcc', test=False) + self.toolchains.Add('sparc-linux-gcc', test=False) + self.toolchains.Add('powerpc-linux-gcc', test=False) + self.toolchains.Add('gcc', test=False) + + def Make(self, commit, brd, stage, *args, **kwargs): + result = command.CommandResult() + boardnum = int(brd.target[-1]) + result.return_code = 0 + result.stderr = '' + result.stdout = ('This is the test output for board %s, commit %s' % + (brd.target, commit.hash)) + if boardnum >= 1 and boardnum >= commit.sequence: + result.return_code = commit.return_code + result.stderr = ''.join(commit.error_list) + if stage == 'build': + target_dir = None + for arg in args: + if arg.startswith('O='): + target_dir = arg[2:] + + if not os.path.isdir(target_dir): + os.mkdir(target_dir) + #time.sleep(.2 + boardnum * .2) + + result.combined = result.stdout + result.stderr + return result + + def testBasic(self): + """Test basic builder operation""" + output_dir = tempfile.mkdtemp() + if not os.path.isdir(output_dir): + os.mkdir(output_dir) + build = builder.Builder(self.toolchains, output_dir, None, 1, 2, + checkout=False, show_unknown=False) + build.do_make = self.Make + board_selected = self.boards.GetSelectedDict() + + #build.BuildCommits(self.commits, board_selected, False) + build.BuildBoards(self.commits, board_selected, False, False) + build.ShowSummary(self.commits, board_selected, True, False, + False, False) + + def _testGit(self): + """Test basic builder operation by building a branch""" + base_dir = tempfile.mkdtemp() + if not os.path.isdir(base_dir): + os.mkdir(base_dir) + options = Options() + options.git = os.getcwd() + options.summary = False + options.jobs = None + options.dry_run = False + #options.git = os.path.join(base_dir, 'repo') + options.branch = 'test-buildman' + options.force_build = False + options.list_tool_chains = False + options.count = -1 + options.git_dir = None + options.threads = None + options.show_unknown = False + options.quick = False + options.show_errors = False + options.keep_outputs = False + args = ['tegra20'] + control.DoBuildman(options, args) + +if __name__ == "__main__": + unittest.main() diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py new file mode 100644 index 0000000000..e0a697037e --- /dev/null +++ b/tools/buildman/toolchain.py @@ -0,0 +1,185 @@ +# Copyright (c) 2012 The Chromium OS Authors. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +import glob +import os + +import bsettings +import command + +class Toolchain: + """A single toolchain + + Public members: + gcc: Full path to C compiler + path: Directory path containing C compiler + cross: Cross compile string, e.g. 'arm-linux-' + arch: Architecture of toolchain as determined from the first + component of the filename. E.g. arm-linux-gcc becomes arm + """ + + def __init__(self, fname, test, verbose=False): + """Create a new toolchain object. + + Args: + fname: Filename of the gcc component + test: True to run the toolchain to test it + """ + self.gcc = fname + self.path = os.path.dirname(fname) + self.cross = os.path.basename(fname)[:-3] + pos = self.cross.find('-') + self.arch = self.cross[:pos] if pos != -1 else 'sandbox' + + env = self.MakeEnvironment() + + # As a basic sanity check, run the C compiler with --version + cmd = [fname, '--version'] + if test: + result = command.RunPipe([cmd], capture=True, env=env) + self.ok = result.return_code == 0 + if verbose: + print 'Tool chain test: ', + if self.ok: + print 'OK' + else: + print 'BAD' + print 'Command: ', cmd + print result.stdout + print result.stderr + else: + self.ok = True + self.priority = self.GetPriority(fname) + + def GetPriority(self, fname): + """Return the priority of the toolchain. + + Toolchains are ranked according to their suitability by their + filename prefix. + + Args: + fname: Filename of toolchain + Returns: + Priority of toolchain, 0=highest, 20=lowest. + """ + priority_list = ['-elf', '-unknown-linux-gnu', '-linux', '-elf', + '-none-linux-gnueabi', '-uclinux', '-none-eabi', + '-gentoo-linux-gnu', '-linux-gnueabi', '-le-linux', '-uclinux'] + for prio in range(len(priority_list)): + if priority_list[prio] in fname: + return prio + return prio + + def MakeEnvironment(self): + """Returns an environment for using the toolchain. + + Thie takes the current environment, adds CROSS_COMPILE and + augments PATH so that the toolchain will operate correctly. + """ + env = dict(os.environ) + env['CROSS_COMPILE'] = self.cross + env['PATH'] += (':' + self.path) + return env + + +class Toolchains: + """Manage a list of toolchains for building U-Boot + + We select one toolchain for each architecture type + + Public members: + toolchains: Dict of Toolchain objects, keyed by architecture name + paths: List of paths to check for toolchains (may contain wildcards) + """ + + def __init__(self): + self.toolchains = {} + self.paths = [] + for name, value in bsettings.GetItems('toolchain'): + if '*' in value: + self.paths += glob.glob(value) + else: + self.paths.append(value) + + + def Add(self, fname, test=True, verbose=False): + """Add a toolchain to our list + + We select the given toolchain as our preferred one for its + architecture if it is a higher priority than the others. + + Args: + fname: Filename of toolchain's gcc driver + test: True to run the toolchain to test it + """ + toolchain = Toolchain(fname, test, verbose) + add_it = toolchain.ok + if toolchain.arch in self.toolchains: + add_it = (toolchain.priority < + self.toolchains[toolchain.arch].priority) + if add_it: + self.toolchains[toolchain.arch] = toolchain + + def Scan(self, verbose): + """Scan for available toolchains and select the best for each arch. + + We look for all the toolchains we can file, figure out the + architecture for each, and whether it works. Then we select the + highest priority toolchain for each arch. + + Args: + verbose: True to print out progress information + """ + if verbose: print 'Scanning for tool chains' + for path in self.paths: + if verbose: print " - scanning path '%s'" % path + for subdir in ['.', 'bin', 'usr/bin']: + dirname = os.path.join(path, subdir) + if verbose: print " - looking in '%s'" % dirname + for fname in glob.glob(dirname + '/*gcc'): + if verbose: print " - found '%s'" % fname + self.Add(fname, True, verbose) + + def List(self): + """List out the selected toolchains for each architecture""" + print 'List of available toolchains (%d):' % len(self.toolchains) + if len(self.toolchains): + for key, value in sorted(self.toolchains.iteritems()): + print '%-10s: %s' % (key, value.gcc) + else: + print 'None' + + def Select(self, arch): + """Returns the toolchain for a given architecture + + Args: + args: Name of architecture (e.g. 'arm', 'ppc_8xx') + + returns: + toolchain object, or None if none found + """ + for name, value in bsettings.GetItems('toolchain-alias'): + if arch == name: + arch = value + + if not arch in self.toolchains: + raise ValueError, ("No tool chain found for arch '%s'" % arch) + return self.toolchains[arch] diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index bf30234190..01fc1d4e57 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -968,7 +968,8 @@ static int flash_read (int fd) } if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH && - mtdinfo.type != MTD_DATAFLASH) { + mtdinfo.type != MTD_DATAFLASH && + mtdinfo.type != MTD_UBIVOLUME) { fprintf (stderr, "Unsupported flash type %u on %s\n", mtdinfo.type, DEVNAME(dev_current)); return -1; @@ -1148,6 +1149,9 @@ int fw_env_open(void) } else if (DEVTYPE(dev_current) == MTD_DATAFLASH && DEVTYPE(!dev_current) == MTD_DATAFLASH) { environment.flag_scheme = FLAG_BOOLEAN; + } else if (DEVTYPE(dev_current) == MTD_UBIVOLUME && + DEVTYPE(!dev_current) == MTD_UBIVOLUME) { + environment.flag_scheme = FLAG_INCREMENTAL; } else { fprintf (stderr, "Incompatible flash types!\n"); return -1; diff --git a/tools/patman/README b/tools/patman/README index 1832ebd183..8cffcd1f3d 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -68,7 +68,7 @@ will get a consistent result each time. How to configure it =================== -For most cases of using patman for U-Boot developement patman will +For most cases of using patman for U-Boot development, patman will locate and use the file 'doc/git-mailrc' in your U-Boot directory. This contains most of the aliases you will need. @@ -182,6 +182,10 @@ END Sets the cover letter contents for the series. The first line will become the subject of the cover letter +Cover-letter-cc: email / alias + Additional email addresses / aliases to send cover letter to (you + can add this multiple times) + Series-notes: blah blah blah blah @@ -198,8 +202,9 @@ END override the default signoff that patman automatically adds. Tested-by: Their Name <email> + Reviewed-by: Their Name <email> Acked-by: Their Name <email> - These indicate that someone has acked or tested your patch. + These indicate that someone has tested/reviewed/acked your patch. When you get this reply on the mailing list, you can add this tag to the relevant commit and the script will include it when you send out the next version. If 'Tested-by:' is set to @@ -220,9 +225,16 @@ Series-changes: n to update the log there and then, knowing that the script will do the rest. -Cc: Their Name <email> + Cc: Their Name <email> This copies a single patch to another email address. +Series-process-log: sort, uniq + This tells patman to sort and/or uniq the change logs. It is + assumed that each change log entry is only a single line long. + Use 'sort' to sort the entries, and 'uniq' to include only + unique entries. If omitted, no change log processing is done. + Separate each tag with a comma. + Various other tags are silently removed, like these Chrome OS and Gerrit tags: @@ -231,7 +243,6 @@ TEST=... Change-Id: Review URL: Reviewed-on: -Reviewed-by: Exercise for the reader: Try adding some tags to one of your current @@ -263,7 +274,13 @@ will create a patch which is copied to x86, arm, sandbox, mikef, ag and afleming. If you have a cover letter it will get sent to the union of the CC lists of -all of the other patches. +all of the other patches. If you want to sent it to additional people you +can add a tag: + +Cover-letter-cc: <list of addresses> + +These people will get the cover letter even if they are not on the To/Cc +list for any of the patches. Example Work Flow diff --git a/tools/patman/checkpatch.py b/tools/patman/checkpatch.py index d3a0477bbf..83aaf710ba 100644 --- a/tools/patman/checkpatch.py +++ b/tools/patman/checkpatch.py @@ -19,6 +19,7 @@ # MA 02111-1307 USA # +import collections import command import gitutil import os @@ -57,63 +58,86 @@ def CheckPatch(fname, verbose=False): """Run checkpatch.pl on a file. Returns: - 4-tuple containing: - result: False=failure, True=ok + namedtuple containing: + ok: False=failure, True=ok problems: List of problems, each a dict: 'type'; error or warning 'msg': text message 'file' : filename 'line': line number + errors: Number of errors + warnings: Number of warnings + checks: Number of checks lines: Number of lines + stdout: Full output of checkpatch """ - result = False - error_count, warning_count, lines = 0, 0, 0 - problems = [] + fields = ['ok', 'problems', 'errors', 'warnings', 'checks', 'lines', + 'stdout'] + result = collections.namedtuple('CheckPatchResult', fields) + result.ok = False + result.errors, result.warning, result.checks = 0, 0, 0 + result.lines = 0 + result.problems = [] chk = FindCheckPatch() item = {} - stdout = command.Output(chk, '--no-tree', fname) + result.stdout = command.Output(chk, '--no-tree', fname) #pipe = subprocess.Popen(cmd, stdout=subprocess.PIPE) #stdout, stderr = pipe.communicate() # total: 0 errors, 0 warnings, 159 lines checked + # or: + # total: 0 errors, 2 warnings, 7 checks, 473 lines checked re_stats = re.compile('total: (\\d+) errors, (\d+) warnings, (\d+)') + re_stats_full = re.compile('total: (\\d+) errors, (\d+) warnings, (\d+)' + ' checks, (\d+)') re_ok = re.compile('.*has no obvious style problems') re_bad = re.compile('.*has style problems, please review') re_error = re.compile('ERROR: (.*)') re_warning = re.compile('WARNING: (.*)') + re_check = re.compile('CHECK: (.*)') re_file = re.compile('#\d+: FILE: ([^:]*):(\d+):') - for line in stdout.splitlines(): + for line in result.stdout.splitlines(): if verbose: print line # A blank line indicates the end of a message if not line and item: - problems.append(item) + result.problems.append(item) item = {} - match = re_stats.match(line) + match = re_stats_full.match(line) + if not match: + match = re_stats.match(line) if match: - error_count = int(match.group(1)) - warning_count = int(match.group(2)) - lines = int(match.group(3)) + result.errors = int(match.group(1)) + result.warnings = int(match.group(2)) + if len(match.groups()) == 4: + result.checks = int(match.group(3)) + result.lines = int(match.group(4)) + else: + result.lines = int(match.group(3)) elif re_ok.match(line): - result = True + result.ok = True elif re_bad.match(line): - result = False - match = re_error.match(line) - if match: - item['msg'] = match.group(1) + result.ok = False + err_match = re_error.match(line) + warn_match = re_warning.match(line) + file_match = re_file.match(line) + check_match = re_check.match(line) + if err_match: + item['msg'] = err_match.group(1) item['type'] = 'error' - match = re_warning.match(line) - if match: - item['msg'] = match.group(1) + elif warn_match: + item['msg'] = warn_match.group(1) item['type'] = 'warning' - match = re_file.match(line) - if match: - item['file'] = match.group(1) - item['line'] = int(match.group(2)) + elif check_match: + item['msg'] = check_match.group(1) + item['type'] = 'check' + elif file_match: + item['file'] = file_match.group(1) + item['line'] = int(file_match.group(2)) - return result, problems, error_count, warning_count, lines, stdout + return result def GetWarningMsg(col, msg_type, fname, line, msg): '''Create a message for a given file/line @@ -128,37 +152,39 @@ def GetWarningMsg(col, msg_type, fname, line, msg): msg_type = col.Color(col.YELLOW, msg_type) elif msg_type == 'error': msg_type = col.Color(col.RED, msg_type) + elif msg_type == 'check': + msg_type = col.Color(col.MAGENTA, msg_type) return '%s: %s,%d: %s' % (msg_type, fname, line, msg) def CheckPatches(verbose, args): '''Run the checkpatch.pl script on each patch''' - error_count = 0 - warning_count = 0 + error_count, warning_count, check_count = 0, 0, 0 col = terminal.Color() for fname in args: - ok, problems, errors, warnings, lines, stdout = CheckPatch(fname, - verbose) - if not ok: - error_count += errors - warning_count += warnings - print '%d errors, %d warnings for %s:' % (errors, - warnings, fname) - if len(problems) != error_count + warning_count: + result = CheckPatch(fname, verbose) + if not result.ok: + error_count += result.errors + warning_count += result.warnings + check_count += result.checks + print '%d errors, %d warnings, %d checks for %s:' % (result.errors, + result.warnings, result.checks, col.Color(col.BLUE, fname)) + if (len(result.problems) != result.errors + result.warnings + + result.checks): print "Internal error: some problems lost" - for item in problems: - print GetWarningMsg(col, item['type'], + for item in result.problems: + print GetWarningMsg(col, item.get('type', '<unknown>'), item.get('file', '<unknown>'), - item.get('line', 0), item['msg']) + item.get('line', 0), item.get('msg', 'message')) + print #print stdout - if error_count != 0 or warning_count != 0: - str = 'checkpatch.pl found %d error(s), %d warning(s)' % ( - error_count, warning_count) + if error_count or warning_count or check_count: + str = 'checkpatch.pl found %d error(s), %d warning(s), %d checks(s)' color = col.GREEN if warning_count: color = col.YELLOW if error_count: color = col.RED - print col.Color(color, str) + print col.Color(color, str % (error_count, warning_count, check_count)) return False return True diff --git a/tools/patman/command.py b/tools/patman/command.py index 4b00250c02..e6af6ed7de 100644 --- a/tools/patman/command.py +++ b/tools/patman/command.py @@ -20,53 +20,98 @@ # import os -import subprocess +import cros_subprocess """Shell command ease-ups for Python.""" -def RunPipe(pipeline, infile=None, outfile=None, - capture=False, oneline=False, hide_stderr=False): +class CommandResult: + """A class which captures the result of executing a command. + + Members: + stdout: stdout obtained from command, as a string + stderr: stderr obtained from command, as a string + return_code: Return code from command + exception: Exception received, or None if all ok + """ + def __init__(self): + self.stdout = None + self.stderr = None + self.return_code = None + self.exception = None + + +def RunPipe(pipe_list, infile=None, outfile=None, + capture=False, capture_stderr=False, oneline=False, + raise_on_error=True, cwd=None, **kwargs): """ Perform a command pipeline, with optional input/output filenames. - hide_stderr Don't allow output of stderr (default False) + Args: + pipe_list: List of command lines to execute. Each command line is + piped into the next, and is itself a list of strings. For + example [ ['ls', '.git'] ['wc'] ] will pipe the output of + 'ls .git' into 'wc'. + infile: File to provide stdin to the pipeline + outfile: File to store stdout + capture: True to capture output + capture_stderr: True to capture stderr + oneline: True to strip newline chars from output + kwargs: Additional keyword arguments to cros_subprocess.Popen() + Returns: + CommandResult object """ + result = CommandResult() last_pipe = None + pipeline = list(pipe_list) + user_pipestr = '|'.join([' '.join(pipe) for pipe in pipe_list]) while pipeline: cmd = pipeline.pop(0) - kwargs = {} if last_pipe is not None: kwargs['stdin'] = last_pipe.stdout elif infile: kwargs['stdin'] = open(infile, 'rb') if pipeline or capture: - kwargs['stdout'] = subprocess.PIPE + kwargs['stdout'] = cros_subprocess.PIPE elif outfile: kwargs['stdout'] = open(outfile, 'wb') - if hide_stderr: - kwargs['stderr'] = open('/dev/null', 'wb') + if capture_stderr: + kwargs['stderr'] = cros_subprocess.PIPE - last_pipe = subprocess.Popen(cmd, **kwargs) + try: + last_pipe = cros_subprocess.Popen(cmd, cwd=cwd, **kwargs) + except Exception, err: + result.exception = err + if raise_on_error: + raise Exception("Error running '%s': %s" % (user_pipestr, str)) + result.return_code = 255 + return result if capture: - ret = last_pipe.communicate()[0] - if not ret: - return None - elif oneline: - return ret.rstrip('\r\n') - else: - return ret + result.stdout, result.stderr, result.combined = ( + last_pipe.CommunicateFilter(None)) + if result.stdout and oneline: + result.output = result.stdout.rstrip('\r\n') + result.return_code = last_pipe.wait() else: - return os.waitpid(last_pipe.pid, 0)[1] == 0 + result.return_code = os.waitpid(last_pipe.pid, 0)[1] + if raise_on_error and result.return_code: + raise Exception("Error running '%s'" % user_pipestr) + return result def Output(*cmd): - return RunPipe([cmd], capture=True) + return RunPipe([cmd], capture=True, raise_on_error=False).stdout -def OutputOneLine(*cmd): - return RunPipe([cmd], capture=True, oneline=True) +def OutputOneLine(*cmd, **kwargs): + raise_on_error = kwargs.pop('raise_on_error', True) + return (RunPipe([cmd], capture=True, oneline=True, + raise_on_error=raise_on_error, + **kwargs).stdout.strip()) def Run(*cmd, **kwargs): - return RunPipe([cmd], **kwargs) + return RunPipe([cmd], **kwargs).stdout def RunList(cmd): - return RunPipe([cmd], capture=True) + return RunPipe([cmd], capture=True).stdout + +def StopAll(): + cros_subprocess.stay_alive = False diff --git a/tools/patman/commit.py b/tools/patman/commit.py index 7144e5414a..468b50cc67 100644 --- a/tools/patman/commit.py +++ b/tools/patman/commit.py @@ -22,7 +22,7 @@ import re # Separates a tag: at the beginning of the subject from the rest of it -re_subject_tag = re.compile('([^:]*):\s*(.*)') +re_subject_tag = re.compile('([^:\s]*):\s*(.*)') class Commit: """Holds information about a single commit/patch in the series. @@ -61,9 +61,10 @@ class Commit: Subject tags look like this: - propounder: Change the widget to propound correctly + propounder: fort: Change the widget to propound correctly - Multiple tags are supported. The list is updated in self.tag + Here the tags are propounder and fort. Multiple tags are supported. + The list is updated in self.tag. Returns: None if ok, else the name of a tag with no email alias diff --git a/tools/patman/cros_subprocess.py b/tools/patman/cros_subprocess.py new file mode 100644 index 0000000000..0fc4a06b50 --- /dev/null +++ b/tools/patman/cros_subprocess.py @@ -0,0 +1,397 @@ +# Copyright (c) 2012 The Chromium OS Authors. +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. +# +# Copyright (c) 2003-2005 by Peter Astrand <astrand@lysator.liu.se> +# Licensed to PSF under a Contributor Agreement. +# See http://www.python.org/2.4/license for licensing details. + +"""Subprocress execution + +This module holds a subclass of subprocess.Popen with our own required +features, mainly that we get access to the subprocess output while it +is running rather than just at the end. This makes it easiler to show +progress information and filter output in real time. +""" + +import errno +import os +import pty +import select +import subprocess +import sys +import unittest + + +# Import these here so the caller does not need to import subprocess also. +PIPE = subprocess.PIPE +STDOUT = subprocess.STDOUT +PIPE_PTY = -3 # Pipe output through a pty +stay_alive = True + + +class Popen(subprocess.Popen): + """Like subprocess.Popen with ptys and incremental output + + This class deals with running a child process and filtering its output on + both stdout and stderr while it is running. We do this so we can monitor + progress, and possibly relay the output to the user if requested. + + The class is similar to subprocess.Popen, the equivalent is something like: + + Popen(args, stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + But this class has many fewer features, and two enhancement: + + 1. Rather than getting the output data only at the end, this class sends it + to a provided operation as it arrives. + 2. We use pseudo terminals so that the child will hopefully flush its output + to us as soon as it is produced, rather than waiting for the end of a + line. + + Use CommunicateFilter() to handle output from the subprocess. + + """ + + def __init__(self, args, stdin=None, stdout=PIPE_PTY, stderr=PIPE_PTY, + shell=False, cwd=None, env=None, **kwargs): + """Cut-down constructor + + Args: + args: Program and arguments for subprocess to execute. + stdin: See subprocess.Popen() + stdout: See subprocess.Popen(), except that we support the sentinel + value of cros_subprocess.PIPE_PTY. + stderr: See subprocess.Popen(), except that we support the sentinel + value of cros_subprocess.PIPE_PTY. + shell: See subprocess.Popen() + cwd: Working directory to change to for subprocess, or None if none. + env: Environment to use for this subprocess, or None to inherit parent. + kwargs: No other arguments are supported at the moment. Passing other + arguments will cause a ValueError to be raised. + """ + stdout_pty = None + stderr_pty = None + + if stdout == PIPE_PTY: + stdout_pty = pty.openpty() + stdout = os.fdopen(stdout_pty[1]) + if stderr == PIPE_PTY: + stderr_pty = pty.openpty() + stderr = os.fdopen(stderr_pty[1]) + + super(Popen, self).__init__(args, stdin=stdin, + stdout=stdout, stderr=stderr, shell=shell, cwd=cwd, env=env, + **kwargs) + + # If we're on a PTY, we passed the slave half of the PTY to the subprocess. + # We want to use the master half on our end from now on. Setting this here + # does make some assumptions about the implementation of subprocess, but + # those assumptions are pretty minor. + + # Note that if stderr is STDOUT, then self.stderr will be set to None by + # this constructor. + if stdout_pty is not None: + self.stdout = os.fdopen(stdout_pty[0]) + if stderr_pty is not None: + self.stderr = os.fdopen(stderr_pty[0]) + + # Insist that unit tests exist for other arguments we don't support. + if kwargs: + raise ValueError("Unit tests do not test extra args - please add tests") + + def CommunicateFilter(self, output): + """Interact with process: Read data from stdout and stderr. + + This method runs until end-of-file is reached, then waits for the + subprocess to terminate. + + The output function is sent all output from the subprocess and must be + defined like this: + + def Output([self,] stream, data) + Args: + stream: the stream the output was received on, which will be + sys.stdout or sys.stderr. + data: a string containing the data + + Note: The data read is buffered in memory, so do not use this + method if the data size is large or unlimited. + + Args: + output: Function to call with each fragment of output. + + Returns: + A tuple (stdout, stderr, combined) which is the data received on + stdout, stderr and the combined data (interleaved stdout and stderr). + + Note that the interleaved output will only be sensible if you have + set both stdout and stderr to PIPE or PIPE_PTY. Even then it depends on + the timing of the output in the subprocess. If a subprocess flips + between stdout and stderr quickly in succession, by the time we come to + read the output from each we may see several lines in each, and will read + all the stdout lines, then all the stderr lines. So the interleaving + may not be correct. In this case you might want to pass + stderr=cros_subprocess.STDOUT to the constructor. + + This feature is still useful for subprocesses where stderr is + rarely used and indicates an error. + + Note also that if you set stderr to STDOUT, then stderr will be empty + and the combined output will just be the same as stdout. + """ + + read_set = [] + write_set = [] + stdout = None # Return + stderr = None # Return + + if self.stdin: + # Flush stdio buffer. This might block, if the user has + # been writing to .stdin in an uncontrolled fashion. + self.stdin.flush() + if input: + write_set.append(self.stdin) + else: + self.stdin.close() + if self.stdout: + read_set.append(self.stdout) + stdout = [] + if self.stderr and self.stderr != self.stdout: + read_set.append(self.stderr) + stderr = [] + combined = [] + + input_offset = 0 + while read_set or write_set: + try: + rlist, wlist, _ = select.select(read_set, write_set, [], 0.2) + except select.error, e: + if e.args[0] == errno.EINTR: + continue + raise + + if not stay_alive: + self.terminate() + + if self.stdin in wlist: + # When select has indicated that the file is writable, + # we can write up to PIPE_BUF bytes without risk + # blocking. POSIX defines PIPE_BUF >= 512 + chunk = input[input_offset : input_offset + 512] + bytes_written = os.write(self.stdin.fileno(), chunk) + input_offset += bytes_written + if input_offset >= len(input): + self.stdin.close() + write_set.remove(self.stdin) + + if self.stdout in rlist: + data = "" + # We will get an error on read if the pty is closed + try: + data = os.read(self.stdout.fileno(), 1024) + except OSError: + pass + if data == "": + self.stdout.close() + read_set.remove(self.stdout) + else: + stdout.append(data) + combined.append(data) + if output: + output(sys.stdout, data) + if self.stderr in rlist: + data = "" + # We will get an error on read if the pty is closed + try: + data = os.read(self.stderr.fileno(), 1024) + except OSError: + pass + if data == "": + self.stderr.close() + read_set.remove(self.stderr) + else: + stderr.append(data) + combined.append(data) + if output: + output(sys.stderr, data) + + # All data exchanged. Translate lists into strings. + if stdout is not None: + stdout = ''.join(stdout) + else: + stdout = '' + if stderr is not None: + stderr = ''.join(stderr) + else: + stderr = '' + combined = ''.join(combined) + + # Translate newlines, if requested. We cannot let the file + # object do the translation: It is based on stdio, which is + # impossible to combine with select (unless forcing no + # buffering). + if self.universal_newlines and hasattr(file, 'newlines'): + if stdout: + stdout = self._translate_newlines(stdout) + if stderr: + stderr = self._translate_newlines(stderr) + + self.wait() + return (stdout, stderr, combined) + + +# Just being a unittest.TestCase gives us 14 public methods. Unless we +# disable this, we can only have 6 tests in a TestCase. That's not enough. +# +# pylint: disable=R0904 + +class TestSubprocess(unittest.TestCase): + """Our simple unit test for this module""" + + class MyOperation: + """Provides a operation that we can pass to Popen""" + def __init__(self, input_to_send=None): + """Constructor to set up the operation and possible input. + + Args: + input_to_send: a text string to send when we first get input. We will + add \r\n to the string. + """ + self.stdout_data = '' + self.stderr_data = '' + self.combined_data = '' + self.stdin_pipe = None + self._input_to_send = input_to_send + if input_to_send: + pipe = os.pipe() + self.stdin_read_pipe = pipe[0] + self._stdin_write_pipe = os.fdopen(pipe[1], 'w') + + def Output(self, stream, data): + """Output handler for Popen. Stores the data for later comparison""" + if stream == sys.stdout: + self.stdout_data += data + if stream == sys.stderr: + self.stderr_data += data + self.combined_data += data + + # Output the input string if we have one. + if self._input_to_send: + self._stdin_write_pipe.write(self._input_to_send + '\r\n') + self._stdin_write_pipe.flush() + + def _BasicCheck(self, plist, oper): + """Basic checks that the output looks sane.""" + self.assertEqual(plist[0], oper.stdout_data) + self.assertEqual(plist[1], oper.stderr_data) + self.assertEqual(plist[2], oper.combined_data) + + # The total length of stdout and stderr should equal the combined length + self.assertEqual(len(plist[0]) + len(plist[1]), len(plist[2])) + + def test_simple(self): + """Simple redirection: Get process list""" + oper = TestSubprocess.MyOperation() + plist = Popen(['ps']).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + + def test_stderr(self): + """Check stdout and stderr""" + oper = TestSubprocess.MyOperation() + cmd = 'echo fred >/dev/stderr && false || echo bad' + plist = Popen([cmd], shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], 'bad\r\n') + self.assertEqual(plist [1], 'fred\r\n') + + def test_shell(self): + """Check with and without shell works""" + oper = TestSubprocess.MyOperation() + cmd = 'echo test >/dev/stderr' + self.assertRaises(OSError, Popen, [cmd], shell=False) + plist = Popen([cmd], shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(len(plist [0]), 0) + self.assertEqual(plist [1], 'test\r\n') + + def test_list_args(self): + """Check with and without shell works using list arguments""" + oper = TestSubprocess.MyOperation() + cmd = ['echo', 'test', '>/dev/stderr'] + plist = Popen(cmd, shell=False).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], ' '.join(cmd[1:]) + '\r\n') + self.assertEqual(len(plist [1]), 0) + + oper = TestSubprocess.MyOperation() + + # this should be interpreted as 'echo' with the other args dropped + cmd = ['echo', 'test', '>/dev/stderr'] + plist = Popen(cmd, shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], '\r\n') + + def test_cwd(self): + """Check we can change directory""" + for shell in (False, True): + oper = TestSubprocess.MyOperation() + plist = Popen('pwd', shell=shell, cwd='/tmp').CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], '/tmp\r\n') + + def test_env(self): + """Check we can change environment""" + for add in (False, True): + oper = TestSubprocess.MyOperation() + env = os.environ + if add: + env ['FRED'] = 'fred' + cmd = 'echo $FRED' + plist = Popen(cmd, shell=True, env=env).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], add and 'fred\r\n' or '\r\n') + + def test_extra_args(self): + """Check we can't add extra arguments""" + self.assertRaises(ValueError, Popen, 'true', close_fds=False) + + def test_basic_input(self): + """Check that incremental input works + + We set up a subprocess which will prompt for name. When we see this prompt + we send the name as input to the process. It should then print the name + properly to stdout. + """ + oper = TestSubprocess.MyOperation('Flash') + prompt = 'What is your name?: ' + cmd = 'echo -n "%s"; read name; echo Hello $name' % prompt + plist = Popen([cmd], stdin=oper.stdin_read_pipe, + shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(len(plist [1]), 0) + self.assertEqual(plist [0], prompt + 'Hello Flash\r\r\n') + + def test_isatty(self): + """Check that ptys appear as terminals to the subprocess""" + oper = TestSubprocess.MyOperation() + cmd = ('if [ -t %d ]; then echo "terminal %d" >&%d; ' + 'else echo "not %d" >&%d; fi;') + both_cmds = '' + for fd in (1, 2): + both_cmds += cmd % (fd, fd, fd, fd, fd) + plist = Popen(both_cmds, shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], 'terminal 1\r\n') + self.assertEqual(plist [1], 'terminal 2\r\n') + + # Now try with PIPE and make sure it is not a terminal + oper = TestSubprocess.MyOperation() + plist = Popen(both_cmds, stdout=subprocess.PIPE, stderr=subprocess.PIPE, + shell=True).CommunicateFilter(oper.Output) + self._BasicCheck(plist, oper) + self.assertEqual(plist [0], 'not 1\n') + self.assertEqual(plist [1], 'not 2\n') + +if __name__ == '__main__': + unittest.main() diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index ca3ba4a03e..f48575013f 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -23,11 +23,12 @@ import command import re import os import series -import settings import subprocess import sys import terminal +import settings + def CountCommitsToBranch(): """Returns number of commits between HEAD and the tracking branch. @@ -40,10 +41,123 @@ def CountCommitsToBranch(): """ pipe = [['git', 'log', '--no-color', '--oneline', '@{upstream}..'], ['wc', '-l']] - stdout = command.RunPipe(pipe, capture=True, oneline=True) + stdout = command.RunPipe(pipe, capture=True, oneline=True).stdout + patch_count = int(stdout) + return patch_count + +def GetUpstream(git_dir, branch): + """Returns the name of the upstream for a branch + + Args: + git_dir: Git directory containing repo + branch: Name of branch + + Returns: + Name of upstream branch (e.g. 'upstream/master') or None if none + """ + remote = command.OutputOneLine('git', '--git-dir', git_dir, 'config', + 'branch.%s.remote' % branch) + merge = command.OutputOneLine('git', '--git-dir', git_dir, 'config', + 'branch.%s.merge' % branch) + if remote == '.': + return merge + elif remote and merge: + leaf = merge.split('/')[-1] + return '%s/%s' % (remote, leaf) + else: + raise ValueError, ("Cannot determine upstream branch for branch " + "'%s' remote='%s', merge='%s'" % (branch, remote, merge)) + + +def GetRangeInBranch(git_dir, branch, include_upstream=False): + """Returns an expression for the commits in the given branch. + + Args: + git_dir: Directory containing git repo + branch: Name of branch + Return: + Expression in the form 'upstream..branch' which can be used to + access the commits. + """ + upstream = GetUpstream(git_dir, branch) + return '%s%s..%s' % (upstream, '~' if include_upstream else '', branch) + +def CountCommitsInBranch(git_dir, branch, include_upstream=False): + """Returns the number of commits in the given branch. + + Args: + git_dir: Directory containing git repo + branch: Name of branch + Return: + Number of patches that exist on top of the branch + """ + range_expr = GetRangeInBranch(git_dir, branch, include_upstream) + pipe = [['git', '--git-dir', git_dir, 'log', '--oneline', range_expr], + ['wc', '-l']] + result = command.RunPipe(pipe, capture=True, oneline=True) + patch_count = int(result.stdout) + return patch_count + +def CountCommits(commit_range): + """Returns the number of commits in the given range. + + Args: + commit_range: Range of commits to count (e.g. 'HEAD..base') + Return: + Number of patches that exist on top of the branch + """ + pipe = [['git', 'log', '--oneline', commit_range], + ['wc', '-l']] + stdout = command.RunPipe(pipe, capture=True, oneline=True).stdout patch_count = int(stdout) return patch_count +def Checkout(commit_hash, git_dir=None, work_tree=None, force=False): + """Checkout the selected commit for this build + + Args: + commit_hash: Commit hash to check out + """ + pipe = ['git'] + if git_dir: + pipe.extend(['--git-dir', git_dir]) + if work_tree: + pipe.extend(['--work-tree', work_tree]) + pipe.append('checkout') + if force: + pipe.append('-f') + pipe.append(commit_hash) + result = command.RunPipe([pipe], capture=True, raise_on_error=False) + if result.return_code != 0: + raise OSError, 'git checkout (%s): %s' % (pipe, result.stderr) + +def Clone(git_dir, output_dir): + """Checkout the selected commit for this build + + Args: + commit_hash: Commit hash to check out + """ + pipe = ['git', 'clone', git_dir, '.'] + result = command.RunPipe([pipe], capture=True, cwd=output_dir) + if result.return_code != 0: + raise OSError, 'git clone: %s' % result.stderr + +def Fetch(git_dir=None, work_tree=None): + """Fetch from the origin repo + + Args: + commit_hash: Commit hash to check out + """ + pipe = ['git'] + if git_dir: + pipe.extend(['--git-dir', git_dir]) + if work_tree: + pipe.extend(['--work-tree', work_tree]) + pipe.append('fetch') + result = command.RunPipe([pipe], capture=True) + if result.return_code != 0: + raise OSError, 'git fetch: %s' % result.stderr + def CreatePatches(start, count, series): """Create a series of patches from the top of the current branch. @@ -159,7 +273,7 @@ def ApplyPatches(verbose, args, start_point): print stdout, stderr return error_count == 0 -def BuildEmailList(in_list, tag=None, alias=None): +def BuildEmailList(in_list, tag=None, alias=None, raise_on_error=True): """Build a list of email addresses based on an input list. Takes a list of email addresses and aliases, and turns this into a list @@ -172,6 +286,9 @@ def BuildEmailList(in_list, tag=None, alias=None): Args: in_list: List of aliases/email addresses tag: Text to put before each address + alias: Alias dictionary + raise_on_error: True to raise an error when an alias fails to match, + False to just print a message. Returns: List of email addresses @@ -193,7 +310,7 @@ def BuildEmailList(in_list, tag=None, alias=None): quote = '"' if tag and tag[0] == '-' else '' raw = [] for item in in_list: - raw += LookupEmail(item, alias) + raw += LookupEmail(item, alias, raise_on_error=raise_on_error) result = [] for item in raw: if not item in result: @@ -202,8 +319,8 @@ def BuildEmailList(in_list, tag=None, alias=None): return ['%s %s%s%s' % (tag, quote, email, quote) for email in result] return result -def EmailPatches(series, cover_fname, args, dry_run, cc_fname, - self_only=False, alias=None): +def EmailPatches(series, cover_fname, args, dry_run, raise_on_error, cc_fname, + self_only=False, alias=None, in_reply_to=None): """Email a patch series. Args: @@ -211,8 +328,12 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, cover_fname: filename of cover letter args: list of filenames of patch files dry_run: Just return the command that would be run + raise_on_error: True to raise an error when an alias fails to match, + False to just print a message. cc_fname: Filename of Cc file for per-commit Cc self_only: True to just email to yourself as a test + in_reply_to: If set we'll pass this to git as --in-reply-to. + Should be a message ID that this is in reply to. Returns: Git command that was/would be run @@ -231,20 +352,21 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, >>> series = series.Series() >>> series.to = ['fred'] >>> series.cc = ['mary'] - >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, 'cc-fname', False, \ - alias) + >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, True, 'cc-fname', \ + False, alias) 'git send-email --annotate --to "f.bloggs@napier.co.nz" --cc \ "m.poppins@cloud.net" --cc-cmd "./patman --cc-cmd cc-fname" cover p1 p2' - >>> EmailPatches(series, None, ['p1'], True, 'cc-fname', False, alias) + >>> EmailPatches(series, None, ['p1'], True, True, 'cc-fname', False, \ + alias) 'git send-email --annotate --to "f.bloggs@napier.co.nz" --cc \ "m.poppins@cloud.net" --cc-cmd "./patman --cc-cmd cc-fname" p1' >>> series.cc = ['all'] - >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, 'cc-fname', True, \ - alias) + >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, True, 'cc-fname', \ + True, alias) 'git send-email --annotate --to "this-is-me@me.com" --cc-cmd "./patman \ --cc-cmd cc-fname" cover p1 p2' - >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, 'cc-fname', False, \ - alias) + >>> EmailPatches(series, 'cover', ['p1', 'p2'], True, True, 'cc-fname', \ + False, alias) 'git send-email --annotate --to "f.bloggs@napier.co.nz" --cc \ "f.bloggs@napier.co.nz" --cc "j.bloggs@napier.co.nz" --cc \ "m.poppins@cloud.net" --cc-cmd "./patman --cc-cmd cc-fname" cover p1 p2' @@ -252,16 +374,19 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, # Restore argv[0] since we clobbered it. >>> sys.argv[0] = _old_argv0 """ - to = BuildEmailList(series.get('to'), '--to', alias) + to = BuildEmailList(series.get('to'), '--to', alias, raise_on_error) if not to: print ("No recipient, please add something like this to a commit\n" "Series-to: Fred Bloggs <f.blogs@napier.co.nz>") return - cc = BuildEmailList(series.get('cc'), '--cc', alias) + cc = BuildEmailList(series.get('cc'), '--cc', alias, raise_on_error) if self_only: - to = BuildEmailList([os.getenv('USER')], '--to', alias) + to = BuildEmailList([os.getenv('USER')], '--to', alias, raise_on_error) cc = [] cmd = ['git', 'send-email', '--annotate'] + if in_reply_to: + cmd.append('--in-reply-to="%s"' % in_reply_to) + cmd += to cmd += cc cmd += ['--cc-cmd', '"%s --cc-cmd %s"' % (sys.argv[0], cc_fname)] @@ -274,13 +399,16 @@ def EmailPatches(series, cover_fname, args, dry_run, cc_fname, return str -def LookupEmail(lookup_name, alias=None, level=0): +def LookupEmail(lookup_name, alias=None, raise_on_error=True, level=0): """If an email address is an alias, look it up and return the full name TODO: Why not just use git's own alias feature? Args: lookup_name: Alias or email address to look up + alias: Dictionary containing aliases (None to use settings default) + raise_on_error: True to raise an error when an alias fails to match, + False to just print a message. Returns: tuple: @@ -314,6 +442,15 @@ def LookupEmail(lookup_name, alias=None, level=0): Traceback (most recent call last): ... OSError: Recursive email alias at 'other' + >>> LookupEmail('odd', alias, raise_on_error=False) + \033[1;31mAlias 'odd' not found\033[0m + [] + >>> # In this case the loop part will effectively be ignored. + >>> LookupEmail('loop', alias, raise_on_error=False) + \033[1;31mRecursive email alias at 'other'\033[0m + \033[1;31mRecursive email alias at 'john'\033[0m + \033[1;31mRecursive email alias at 'mary'\033[0m + ['j.bloggs@napier.co.nz', 'm.poppins@cloud.net'] """ if not alias: alias = settings.alias @@ -322,16 +459,27 @@ def LookupEmail(lookup_name, alias=None, level=0): return [lookup_name] lookup_name = lookup_name.lower() + col = terminal.Color() + out_list = [] if level > 10: - raise OSError, "Recursive email alias at '%s'" % lookup_name + msg = "Recursive email alias at '%s'" % lookup_name + if raise_on_error: + raise OSError, msg + else: + print col.Color(col.RED, msg) + return out_list - out_list = [] if lookup_name: if not lookup_name in alias: - raise ValueError, "Alias '%s' not found" % lookup_name + msg = "Alias '%s' not found" % lookup_name + if raise_on_error: + raise ValueError, msg + else: + print col.Color(col.RED, msg) + return out_list for item in alias[lookup_name]: - todo = LookupEmail(item, alias, level + 1) + todo = LookupEmail(item, alias, raise_on_error, level + 1) for new_item in todo: if not new_item in out_list: out_list.append(new_item) @@ -359,7 +507,8 @@ def GetAliasFile(): Returns: Filename of git alias file, or None if none """ - fname = command.OutputOneLine('git', 'config', 'sendemail.aliasesfile') + fname = command.OutputOneLine('git', 'config', 'sendemail.aliasesfile', + raise_on_error=False) if fname: fname = os.path.join(GetTopLevel(), fname.strip()) return fname @@ -389,6 +538,14 @@ def Setup(): if alias_fname: settings.ReadGitAliases(alias_fname) +def GetHead(): + """Get the hash of the current HEAD + + Returns: + Hash of HEAD + """ + return command.OutputOneLine('git', 'show', '-s', '--pretty=format:%H') + if __name__ == "__main__": import doctest diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index f7ee75a25f..7334ed30e3 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -31,7 +31,7 @@ from series import Series # Tags that we detect and remove re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:' - '|Reviewed-on:|Reviewed-by:|Commit-Ready:') + '|Reviewed-on:|Commit-\w*:') # Lines which are allowed after a TEST= line re_allowed_after_test = re.compile('^Signed-off-by:') @@ -42,14 +42,17 @@ re_signoff = re.compile('^Signed-off-by:') # The start of the cover letter re_cover = re.compile('^Cover-letter:') +# A cover letter Cc +re_cover_cc = re.compile('^Cover-letter-cc: *(.*)') + # Patch series tag -re_series = re.compile('^Series-(\w*): *(.*)') +re_series = re.compile('^Series-([a-z-]*): *(.*)') # Commit tags that we want to collect and keep -re_tag = re.compile('^(Tested-by|Acked-by|Cc): (.*)') +re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)') # The start of a new commit in the git log -re_commit = re.compile('^commit (.*)') +re_commit = re.compile('^commit ([0-9a-f]*)$') # We detect these since checkpatch doesn't always do it re_space_before_tab = re.compile('^[+].* \t') @@ -153,6 +156,7 @@ class PatchStream: # Handle state transition and skipping blank lines series_match = re_series.match(line) commit_match = re_commit.match(line) if self.is_log else None + cover_cc_match = re_cover_cc.match(line) tag_match = None if self.state == STATE_PATCH_HEADER: tag_match = re_tag.match(line) @@ -205,6 +209,10 @@ class PatchStream: self.in_section = 'cover' self.skip_blank = False + elif cover_cc_match: + value = cover_cc_match.group(1) + self.AddToSeries(line, 'cover-cc', value) + # If we are in a change list, key collected lines until a blank one elif self.in_change: if is_blank: @@ -237,7 +245,8 @@ class PatchStream: # Detect the start of a new commit elif commit_match: self.CloseCommit() - self.commit = commit.Commit(commit_match.group(1)[:7]) + # TODO: We should store the whole hash, and just display a subset + self.commit = commit.Commit(commit_match.group(1)[:8]) # Detect tags in the commit message elif tag_match: @@ -334,26 +343,47 @@ class PatchStream: self.Finalize() -def GetMetaData(start, count): +def GetMetaDataForList(commit_range, git_dir=None, count=None, + series = Series()): """Reads out patch series metadata from the commits This does a 'git log' on the relevant commits and pulls out the tags we are interested in. Args: - start: Commit to start from: 0=HEAD, 1=next one, etc. - count: Number of commits to list + commit_range: Range of commits to count (e.g. 'HEAD..base') + git_dir: Path to git repositiory (None to use default) + count: Number of commits to list, or None for no limit + series: Series object to add information into. By default a new series + is started. + Returns: + A Series object containing information about the commits. """ - pipe = [['git', 'log', '--no-color', '--reverse', 'HEAD~%d' % start, - '-n%d' % count]] - stdout = command.RunPipe(pipe, capture=True) - series = Series() + params = ['git', 'log', '--no-color', '--reverse', commit_range] + if count is not None: + params[2:2] = ['-n%d' % count] + if git_dir: + params[1:1] = ['--git-dir', git_dir] + pipe = [params] + stdout = command.RunPipe(pipe, capture=True).stdout ps = PatchStream(series, is_log=True) for line in stdout.splitlines(): ps.ProcessLine(line) ps.Finalize() return series +def GetMetaData(start, count): + """Reads out patch series metadata from the commits + + This does a 'git log' on the relevant commits and pulls out the tags we + are interested in. + + Args: + start: Commit to start from: 0=HEAD, 1=next one, etc. + count: Number of commits to list + """ + return GetMetaDataForList('HEAD~%d' % start, None, count) + def FixPatch(backup_dir, fname, series, commit): """Fix up a patch file, by adding/removing as required. diff --git a/tools/patman/patman.py b/tools/patman/patman.py index e049081eae..a8061a9372 100755 --- a/tools/patman/patman.py +++ b/tools/patman/patman.py @@ -41,6 +41,9 @@ import test parser = OptionParser() +parser.add_option('-a', '--no-apply', action='store_false', + dest='apply_patches', default=True, + help="Don't test-apply patches with git am") parser.add_option('-H', '--full-help', action='store_true', dest='full_help', default=False, help='Display the README file') parser.add_option('-c', '--count', dest='count', type='int', @@ -49,13 +52,17 @@ parser.add_option('-i', '--ignore-errors', action='store_true', dest='ignore_errors', default=False, help='Send patches email even if patch errors are found') parser.add_option('-n', '--dry-run', action='store_true', dest='dry_run', - default=False, help="Do a try run (create but don't email patches)") + default=False, help="Do a dry run (create but don't email patches)") parser.add_option('-p', '--project', default=project.DetectProject(), help="Project name; affects default option values and " "aliases [default: %default]") +parser.add_option('-r', '--in-reply-to', type='string', action='store', + help="Message ID that this series is in reply to") parser.add_option('-s', '--start', dest='start', type='int', default=0, help='Commit to start creating patches from (0 = HEAD)') -parser.add_option('-t', '--test', action='store_true', dest='test', +parser.add_option('-t', '--ignore-bad-tags', action='store_true', + default=False, help='Ignore bad tags / aliases') +parser.add_option('--test', action='store_true', dest='test', default=False, help='run tests') parser.add_option('-v', '--verbose', action='store_true', dest='verbose', default=False, help='Verbose output of errors and warnings') @@ -70,7 +77,7 @@ parser.add_option('--no-tags', action='store_false', dest='process_tags', parser.usage = """patman [options] Create patches from commits in a branch, check them and email them as -specified by tags you place in the commits. Use -n to """ +specified by tags you place in the commits. Use -n to do a dry run first.""" # Parse options twice: first to get the project and second to handle @@ -153,17 +160,20 @@ else: ok = checkpatch.CheckPatches(options.verbose, args) else: ok = True - if not gitutil.ApplyPatches(options.verbose, args, - options.count + options.start): - ok = False + if options.apply_patches: + if not gitutil.ApplyPatches(options.verbose, args, + options.count + options.start): + ok = False - cc_file = series.MakeCcFile(options.process_tags, cover_fname) + cc_file = series.MakeCcFile(options.process_tags, cover_fname, + not options.ignore_bad_tags) # Email the patches out (giving the user time to check / cancel) cmd = '' if ok or options.ignore_errors: cmd = gitutil.EmailPatches(series, cover_fname, args, - options.dry_run, cc_file) + options.dry_run, not options.ignore_bad_tags, cc_file, + in_reply_to=options.in_reply_to) # For a dry run, just show our actions as a sanity check if options.dry_run: diff --git a/tools/patman/series.py b/tools/patman/series.py index 6c5c5702e8..783b3dd133 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -27,7 +27,8 @@ import gitutil import terminal # Series-xxx tags that we understand -valid_series = ['to', 'cc', 'version', 'changes', 'prefix', 'notes', 'name']; +valid_series = ['to', 'cc', 'version', 'changes', 'prefix', 'notes', 'name', + 'cover-cc', 'process_log'] class Series(dict): """Holds information about a patch series, including all tags. @@ -43,6 +44,7 @@ class Series(dict): def __init__(self): self.cc = [] self.to = [] + self.cover_cc = [] self.commits = [] self.cover = None self.notes = [] @@ -69,6 +71,7 @@ class Series(dict): value: Tag value (part after 'Series-xxx: ') """ # If we already have it, then add to our list + name = name.replace('-', '_') if name in self: values = value.split(',') values = [str.strip() for str in values] @@ -140,7 +143,8 @@ class Series(dict): print 'Prefix:\t ', self.get('prefix') if self.cover: print 'Cover: %d lines' % len(self.cover) - all_ccs = itertools.chain(*self._generated_cc.values()) + cover_cc = gitutil.BuildEmailList(self.get('cover_cc', '')) + all_ccs = itertools.chain(cover_cc, *self._generated_cc.values()) for email in set(all_ccs): print ' Cc: ',email if cmd: @@ -163,15 +167,20 @@ class Series(dict): etc. """ final = [] + process_it = self.get('process_log', '').split(',') + process_it = [item.strip() for item in process_it] need_blank = False for change in sorted(self.changes, reverse=True): out = [] for this_commit, text in self.changes[change]: if commit and this_commit != commit: continue - out.append(text) + if 'uniq' not in process_it or text not in out: + out.append(text) line = 'Changes in v%d:' % change have_changes = len(out) > 0 + if 'sort' in process_it: + out = sorted(out) if have_changes: out.insert(0, line) else: @@ -206,7 +215,7 @@ class Series(dict): str = 'Change log exists, but no version is set' print col.Color(col.RED, str) - def MakeCcFile(self, process_tags, cover_fname): + def MakeCcFile(self, process_tags, cover_fname, raise_on_error): """Make a cc file for us to use for per-commit Cc automation Also stores in self._generated_cc to make ShowActions() faster. @@ -214,6 +223,8 @@ class Series(dict): Args: process_tags: Process tags as if they were aliases cover_fname: If non-None the name of the cover letter. + raise_on_error: True to raise an error when an alias fails to match, + False to just print a message. Return: Filename of temp file created """ @@ -224,15 +235,18 @@ class Series(dict): for commit in self.commits: list = [] if process_tags: - list += gitutil.BuildEmailList(commit.tags) - list += gitutil.BuildEmailList(commit.cc_list) + list += gitutil.BuildEmailList(commit.tags, + raise_on_error=raise_on_error) + list += gitutil.BuildEmailList(commit.cc_list, + raise_on_error=raise_on_error) list += get_maintainer.GetMaintainer(commit.patch) all_ccs += list print >>fd, commit.patch, ', '.join(list) self._generated_cc[commit.patch] = list if cover_fname: - print >>fd, cover_fname, ', '.join(set(all_ccs)) + cover_cc = gitutil.BuildEmailList(self.get('cover_cc', '')) + print >>fd, cover_fname, ', '.join(set(cover_cc + all_ccs)) fd.close() return fname diff --git a/tools/patman/terminal.py b/tools/patman/terminal.py index 838c82845f..337a2a43c0 100644 --- a/tools/patman/terminal.py +++ b/tools/patman/terminal.py @@ -24,24 +24,32 @@ This module handles terminal interaction including ANSI color codes. """ +import os +import sys + +# Selection of when we want our output to be colored +COLOR_IF_TERMINAL, COLOR_ALWAYS, COLOR_NEVER = range(3) + class Color(object): """Conditionally wraps text in ANSI color escape sequences.""" BLACK, RED, GREEN, YELLOW, BLUE, MAGENTA, CYAN, WHITE = range(8) BOLD = -1 - COLOR_START = '\033[1;%dm' + BRIGHT_START = '\033[1;%dm' + NORMAL_START = '\033[22;%dm' BOLD_START = '\033[1m' RESET = '\033[0m' - def __init__(self, enabled=True): + def __init__(self, colored=COLOR_IF_TERMINAL): """Create a new Color object, optionally disabling color output. Args: enabled: True if color output should be enabled. If False then this class will not add color codes at all. """ - self._enabled = enabled + self._enabled = (colored == COLOR_ALWAYS or + (colored == COLOR_IF_TERMINAL and os.isatty(sys.stdout.fileno()))) - def Start(self, color): + def Start(self, color, bright=True): """Returns a start color code. Args: @@ -52,7 +60,8 @@ class Color(object): otherwise returns empty string """ if self._enabled: - return self.COLOR_START % (color + 30) + base = self.BRIGHT_START if bright else self.NORMAL_START + return base % (color + 30) return '' def Stop(self): @@ -63,10 +72,10 @@ class Color(object): returns empty string """ if self._enabled: - return self.RESET + return self.RESET return '' - def Color(self, color, text): + def Color(self, color, text, bright=True): """Returns text with conditionally added color escape sequences. Keyword arguments: @@ -78,9 +87,10 @@ class Color(object): returns text with color escape sequences based on the value of color. """ if not self._enabled: - return text + return text if color == self.BOLD: - start = self.BOLD_START + start = self.BOLD_START else: - start = self.COLOR_START % (color + 30) + base = self.BRIGHT_START if bright else self.NORMAL_START + start = base % (color + 30) return start + text + self.RESET diff --git a/tools/patman/test.py b/tools/patman/test.py index f801cedc7b..8cd26471c3 100644 --- a/tools/patman/test.py +++ b/tools/patman/test.py @@ -190,6 +190,11 @@ index 0000000..2234c87 + rec->time_us = (uint32_t)timer_get_us(); + rec->name = name; + } ++ if (!rec->name && ++ %ssomething_else) { ++ rec->time_us = (uint32_t)timer_get_us(); ++ rec->name = name; ++ } +%sreturn rec->time_us; +} -- @@ -197,15 +202,18 @@ index 0000000..2234c87 ''' signoff = 'Signed-off-by: Simon Glass <sjg@chromium.org>\n' tab = ' ' + indent = ' ' if data_type == 'good': pass elif data_type == 'no-signoff': signoff = '' elif data_type == 'spaces': tab = ' ' + elif data_type == 'indent': + indent = tab else: print 'not implemented' - return data % (signoff, tab, tab) + return data % (signoff, tab, indent, tab) def SetupData(self, data_type): inhandle, inname = tempfile.mkstemp() @@ -215,33 +223,49 @@ index 0000000..2234c87 infd.close() return inname - def testCheckpatch(self): + def testGood(self): """Test checkpatch operation""" inf = self.SetupData('good') - result, problems, err, warn, lines, stdout = checkpatch.CheckPatch(inf) - self.assertEqual(result, True) - self.assertEqual(problems, []) - self.assertEqual(err, 0) - self.assertEqual(warn, 0) - self.assertEqual(lines, 67) + result = checkpatch.CheckPatch(inf) + self.assertEqual(result.ok, True) + self.assertEqual(result.problems, []) + self.assertEqual(result.errors, 0) + self.assertEqual(result.warnings, 0) + self.assertEqual(result.checks, 0) + self.assertEqual(result.lines, 67) os.remove(inf) + def testNoSignoff(self): inf = self.SetupData('no-signoff') - result, problems, err, warn, lines, stdout = checkpatch.CheckPatch(inf) - self.assertEqual(result, False) - self.assertEqual(len(problems), 1) - self.assertEqual(err, 1) - self.assertEqual(warn, 0) - self.assertEqual(lines, 67) + result = checkpatch.CheckPatch(inf) + self.assertEqual(result.ok, False) + self.assertEqual(len(result.problems), 1) + self.assertEqual(result.errors, 1) + self.assertEqual(result.warnings, 0) + self.assertEqual(result.checks, 0) + self.assertEqual(result.lines, 67) os.remove(inf) + def testSpaces(self): inf = self.SetupData('spaces') - result, problems, err, warn, lines, stdout = checkpatch.CheckPatch(inf) - self.assertEqual(result, False) - self.assertEqual(len(problems), 2) - self.assertEqual(err, 0) - self.assertEqual(warn, 2) - self.assertEqual(lines, 67) + result = checkpatch.CheckPatch(inf) + self.assertEqual(result.ok, False) + self.assertEqual(len(result.problems), 1) + self.assertEqual(result.errors, 0) + self.assertEqual(result.warnings, 1) + self.assertEqual(result.checks, 0) + self.assertEqual(result.lines, 67) + os.remove(inf) + + def testIndent(self): + inf = self.SetupData('indent') + result = checkpatch.CheckPatch(inf) + self.assertEqual(result.ok, False) + self.assertEqual(len(result.problems), 1) + self.assertEqual(result.errors, 0) + self.assertEqual(result.warnings, 0) + self.assertEqual(result.checks, 1) + self.assertEqual(result.lines, 67) os.remove(inf) |