x86: Add Advantech SOM-DB5800/SOM-6867 support

Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.

Currently supported:
 - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
   SOM-DB5800.
 - 4x USB 2.0 (EHCI)
 - Video
 - SATA
 - Ethernet
 - PCIe
 - Realtek ALC892 HD Audio
   Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
   HDA_SDI0 is set in DT to enable HD Audio codec.
   Pin defaults for codec pin complexs are not changed.

Not supported:
 - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
 - USB 3.0 (XHCI)
 - TPM

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

14 files changed, 524 insertions, 1 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 29d2307fa5..29d112097a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,9 @@ choice
 	prompt "Mainboard vendor"
 	default VENDOR_EMULATION
 
+config VENDOR_ADVANTECH
+	bool "advantech"
+
 config VENDOR_CONGATEC
 	bool "congatec"
 
@@ -29,6 +32,7 @@ config VENDOR_INTEL
 endchoice
 
 # board-specific options below
+source "board/advantech/Kconfig"
 source "board/congatec/Kconfig"
 source "board/coreboot/Kconfig"
 source "board/efi/Kconfig"
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index 23156bb231..4f07f41042 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -14,7 +14,8 @@ dtb-y += bayleybay.dtb \
 	minnowmax.dtb \
 	qemu-x86_i440fx.dtb \
 	qemu-x86_q35.dtb \
-	broadwell_som-6896.dtb
+	broadwell_som-6896.dtb \
+	baytrail_som-db5800-som-6867.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/x86/dts/baytrail_som-db5800-som-6867.dts b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
new file mode 100644
index 0000000000..64e2e528e9
--- /dev/null
+++ b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2016, George McCollister <george.mccollister@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/x86-gpio.h>
+#include <dt-bindings/interrupt-router/intel-irq.h>
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+/ {
+	model = "Advantech SOM-DB5800-SOM-6867";
+	compatible = "advantech,som-db5800-som-6867", "intel,baytrail";
+
+	aliases {
+		serial0 = &serial;
+		spi0 = &spi;
+	};
+
+	config {
+		silent_console = <0>;
+	};
+
+	pch_pinctrl {
+		compatible = "intel,x86-pinctrl";
+		reg = <0 0>;
+
+		/* HDA_RSTB */
+		soc_gpio_s0_8@0 {
+			pad-offset = <0x220>;
+			mode-func = <2>;
+		};
+
+		/* HDA_SYNC */
+		soc_gpio_s0_9@0 {
+			pad-offset = <0x250>;
+			mode-func = <2>;
+			pull-assign = <1>;
+		};
+
+		/* HDA_CLK */
+		soc_gpio_s0_10@0 {
+			pad-offset = <0x240>;
+			mode-func = <2>;
+		};
+
+		/* HDA_SDO */
+		soc_gpio_s0_11@0 {
+			pad-offset = <0x260>;
+			mode-func = <2>;
+			pull-assign = <1>;
+		};
+
+		/* HDA_SDI0 */
+		soc_gpio_s0_12@0 {
+			pad-offset = <0x270>;
+			mode-func = <2>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/serial";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,baytrail-cpu";
+			reg = <0>;
+			intel,apic-id = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "intel,baytrail-cpu";
+			reg = <1>;
+			intel,apic-id = <2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "intel,baytrail-cpu";
+			reg = <2>;
+			intel,apic-id = <4>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "intel,baytrail-cpu";
+			reg = <3>;
+			intel,apic-id = <6>;
+		};
+
+	};
+
+	pci {
+		compatible = "intel,pci-baytrail", "pci-x86";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		u-boot,dm-pre-reloc;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
+			  0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+
+		pch@1f,0 {
+			reg = <0x0000f800 0 0 0 0>;
+			compatible = "pci8086,0f1c", "intel,pch9";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			irq-router {
+				compatible = "intel,irq-router";
+				intel,pirq-config = "ibase";
+				intel,ibase-offset = <0x50>;
+				intel,actl-addr = <0>;
+				intel,pirq-link = <8 8>;
+				intel,pirq-mask = <0xdee0>;
+				intel,pirq-routing = <
+					/* BayTrail PCI devices */
+					PCI_BDF(0, 2, 0) INTA PIRQA
+					PCI_BDF(0, 3, 0) INTA PIRQA
+					PCI_BDF(0, 16, 0) INTA PIRQA
+					PCI_BDF(0, 17, 0) INTA PIRQA
+					PCI_BDF(0, 18, 0) INTA PIRQA
+					PCI_BDF(0, 19, 0) INTA PIRQA
+					PCI_BDF(0, 20, 0) INTA PIRQA
+					PCI_BDF(0, 21, 0) INTA PIRQA
+					PCI_BDF(0, 22, 0) INTA PIRQA
+					PCI_BDF(0, 23, 0) INTA PIRQA
+					PCI_BDF(0, 24, 0) INTA PIRQA
+					PCI_BDF(0, 24, 1) INTC PIRQC
+					PCI_BDF(0, 24, 2) INTD PIRQD
+					PCI_BDF(0, 24, 3) INTB PIRQB
+					PCI_BDF(0, 24, 4) INTA PIRQA
+					PCI_BDF(0, 24, 5) INTC PIRQC
+					PCI_BDF(0, 24, 6) INTD PIRQD
+					PCI_BDF(0, 24, 7) INTB PIRQB
+					PCI_BDF(0, 26, 0) INTA PIRQA
+					PCI_BDF(0, 27, 0) INTA PIRQA
+					PCI_BDF(0, 28, 0) INTA PIRQA
+					PCI_BDF(0, 28, 1) INTB PIRQB
+					PCI_BDF(0, 28, 2) INTC PIRQC
+					PCI_BDF(0, 28, 3) INTD PIRQD
+					PCI_BDF(0, 29, 0) INTA PIRQA
+					PCI_BDF(0, 30, 0) INTA PIRQA
+					PCI_BDF(0, 30, 1) INTD PIRQD
+					PCI_BDF(0, 30, 2) INTB PIRQB
+					PCI_BDF(0, 30, 3) INTC PIRQC
+					PCI_BDF(0, 30, 4) INTD PIRQD
+					PCI_BDF(0, 30, 5) INTB PIRQB
+					PCI_BDF(0, 31, 3) INTB PIRQB
+
+					/*
+					 * PCIe root ports downstream
+					 * interrupts
+					 */
+					PCI_BDF(1, 0, 0) INTA PIRQA
+					PCI_BDF(1, 0, 0) INTB PIRQB
+					PCI_BDF(1, 0, 0) INTC PIRQC
+					PCI_BDF(1, 0, 0) INTD PIRQD
+					PCI_BDF(2, 0, 0) INTA PIRQB
+					PCI_BDF(2, 0, 0) INTB PIRQC
+					PCI_BDF(2, 0, 0) INTC PIRQD
+					PCI_BDF(2, 0, 0) INTD PIRQA
+					PCI_BDF(3, 0, 0) INTA PIRQC
+					PCI_BDF(3, 0, 0) INTB PIRQD
+					PCI_BDF(3, 0, 0) INTC PIRQA
+					PCI_BDF(3, 0, 0) INTD PIRQB
+					PCI_BDF(4, 0, 0) INTA PIRQD
+					PCI_BDF(4, 0, 0) INTB PIRQA
+					PCI_BDF(4, 0, 0) INTC PIRQB
+					PCI_BDF(4, 0, 0) INTD PIRQC
+				>;
+			};
+
+			spi: spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich9-spi";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					reg = <0>;
+					compatible = "macronix,mx25l6405d",
+						"spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+					rw-mrc-cache {
+						label = "rw-mrc-cache";
+						reg = <0x006f0000 0x00010000>;
+					};
+				};
+			};
+
+			gpioa {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0 0x20>;
+				bank-name = "A";
+			};
+
+			gpiob {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x20 0x20>;
+				bank-name = "B";
+			};
+
+			gpioc {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x40 0x20>;
+				bank-name = "C";
+			};
+
+			gpiod {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x60 0x20>;
+				bank-name = "D";
+			};
+
+			gpioe {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x80 0x20>;
+				bank-name = "E";
+			};
+
+			gpiof {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0xA0 0x20>;
+				bank-name = "F";
+			};
+		};
+	};
+
+	fsp {
+		compatible = "intel,baytrail-fsp";
+		fsp,mrc-init-tseg-size = <0>;
+		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-spd-addr1 = <0xa0>;
+		fsp,mrc-init-spd-addr2 = <0xa2>;
+		fsp,enable-spi;
+		fsp,enable-sata;
+		fsp,sata-mode = <1>;
+		fsp,enable-azalia;
+		fsp,lpss-sio-enable-pci-mode;
+		fsp,enable-dma0;
+		fsp,enable-dma1;
+		fsp,enable-i2c0;
+		fsp,enable-i2c1;
+		fsp,enable-i2c2;
+		fsp,enable-i2c3;
+		fsp,enable-i2c4;
+		fsp,enable-i2c5;
+		fsp,enable-i2c6;
+		fsp,enable-pwm0;
+		fsp,enable-pwm1;
+		fsp,igd-dvmt50-pre-alloc = <2>;
+		fsp,aperture-size = <2>;
+		fsp,gtt-size = <2>;
+		fsp,scc-enable-pci-mode;
+		fsp,os-selection = <4>;
+		fsp,enable-igd;
+		fsp,serial-debug-port-address = <0x3f8>;
+		fsp,serial-debug-port-type = <1>;
+	};
+
+	microcode {
+		update@0 {
+#include "microcode/m0130673325.dtsi"
+		};
+		update@1 {
+#include "microcode/m0130679907.dtsi"
+		};
+	};
+
+};
diff --git a/board/advantech/Kconfig b/board/advantech/Kconfig
new file mode 100644
index 0000000000..a8d49691f7
--- /dev/null
+++ b/board/advantech/Kconfig
@@ -0,0 +1,28 @@
+if VENDOR_ADVANTECH
+
+choice
+	prompt "Mainboard model"
+	optional
+
+config TARGET_SOM_DB5800_SOM_6867
+	bool "Advantech SOM-DB5800 & SOM-6867"
+	help
+	  Advantech SOM-DB5800 COM Express development board with SOM-6867
+	  installed.
+
+	  SOM-6867 is a COM Express Type 6 Compact Module with either an Intel
+	  Atom E3845 or Celeron N2920 processor.
+
+	  SOM-DB5800 is a COM Express Development board with:
+	    10/100/1000 Ethernet
+	    PCIe slots
+	    4x USB ports
+	    HDMI/DisplayPort/DVI, LVDS, VGA
+	    SATA ports
+	    ALC892 HD Audio Codec
+
+endchoice
+
+source "board/advantech/som-db5800-som-6867/Kconfig"
+
+endif
diff --git a/board/advantech/som-db5800-som-6867/.gitignore b/board/advantech/som-db5800-som-6867/.gitignore
new file mode 100644
index 0000000000..6eb8a5481a
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/.gitignore
@@ -0,0 +1,3 @@
+dsdt.aml
+dsdt.asl.tmp
+dsdt.c
diff --git a/board/advantech/som-db5800-som-6867/Kconfig b/board/advantech/som-db5800-som-6867/Kconfig
new file mode 100644
index 0000000000..f6f3748fc3
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/Kconfig
@@ -0,0 +1,28 @@
+if TARGET_SOM_DB5800_SOM_6867
+
+config SYS_BOARD
+	default "som-db5800-som-6867"
+
+config SYS_VENDOR
+	default "advantech"
+
+config SYS_SOC
+	default "baytrail"
+
+config SYS_CONFIG_NAME
+	default "som-db5800-som-6867"
+
+config SYS_TEXT_BASE
+	default 0xfff00000 if !EFI_STUB
+	default 0x01110000 if EFI_STUB
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR if !EFI_STUB
+	select INTEL_BAYTRAIL
+	select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+	default 0xe0000000
+
+endif
diff --git a/board/advantech/som-db5800-som-6867/MAINTAINERS b/board/advantech/som-db5800-som-6867/MAINTAINERS
new file mode 100644
index 0000000000..92989bfba0
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/MAINTAINERS
@@ -0,0 +1,7 @@
+Advantech SOM-DB5800-SOM-6867
+M:	George McCollister <george.mccollister@gmail.com>
+S:	Maintained
+F:	board/advantech/som-db5800-som-6867
+F:	include/configs/som-db5800-som-6867.h
+F:	configs/som-db5800-som-6867_defconfig
+F:	arch/x86/dts/baytrail_som-db5800-som-6867.dts
diff --git a/board/advantech/som-db5800-som-6867/Makefile b/board/advantech/som-db5800-som-6867/Makefile
new file mode 100644
index 0000000000..9837aa0c79
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2015, Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= som-db5800-som-6867.o start.o
+obj-$(CONFIG_GENERATE_ACPI_TABLE) += dsdt.o
diff --git a/board/advantech/som-db5800-som-6867/acpi/mainboard.asl b/board/advantech/som-db5800-som-6867/acpi/mainboard.asl
new file mode 100644
index 0000000000..21785ea73b
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/acpi/mainboard.asl
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* Power Button */
+Device (PWRB)
+{
+	Name(_HID, EISAID("PNP0C0C"))
+}
diff --git a/board/advantech/som-db5800-som-6867/dsdt.asl b/board/advantech/som-db5800-som-6867/dsdt.asl
new file mode 100644
index 0000000000..6042011acf
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/dsdt.asl
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+DefinitionBlock("dsdt.aml", "DSDT", 2, "U-BOOT", "U-BOOTBL", 0x00010000)
+{
+	/* platform specific */
+	#include <asm/arch/acpi/platform.asl>
+
+	/* board specific */
+	#include "acpi/mainboard.asl"
+}
diff --git a/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
new file mode 100644
index 0000000000..5bed2c1146
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2016 George McCollister <george.mccollister@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+int board_early_init_f(void)
+{
+	/*
+	 * The FSP enables the BayTrail internal legacy UART (again).
+	 * Disable it again, so that the one on the EC can be used.
+	 */
+	setup_internal_uart(0);
+
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	return 0;
+}
diff --git a/board/advantech/som-db5800-som-6867/start.S b/board/advantech/som-db5800-som-6867/start.S
new file mode 100644
index 0000000000..2c941a4a51
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/start.S
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig
new file mode 100644
index 0000000000..30e093bf08
--- /dev/null
+++ b/configs/som-db5800-som-6867_defconfig
@@ -0,0 +1,61 @@
+CONFIG_X86=y
+CONFIG_VENDOR_ADVANTECH=y
+CONFIG_DEFAULT_DEVICE_TREE="baytrail_som-db5800-som-6867"
+CONFIG_TARGET_SOM_DB5800_SOM_6867=y
+CONFIG_HAVE_INTEL_ME=y
+CONFIG_ENABLE_MRC_CACHE=y
+CONFIG_SMP=y
+CONFIG_HAVE_VGA_BIOS=y
+CONFIG_GENERATE_PIRQ_TABLE=y
+CONFIG_GENERATE_MP_TABLE=y
+CONFIG_GENERATE_ACPI_TABLE=y
+CONFIG_SEABIOS=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_MMC is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CPU=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_DM_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x3f8
+CONFIG_DEBUG_UART_CLOCK=1843200
+CONFIG_SYS_NS16550=y
+CONFIG_ICH_SPI=y
+CONFIG_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_VIDEO_VESA=y
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
+CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/include/configs/som-db5800-som-6867.h b/include/configs/som-db5800-som-6867.h
new file mode 100644
index 0000000000..a4b343eae9
--- /dev/null
+++ b/include/configs/som-db5800-som-6867.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_EARLY_INIT_R
+#define CONFIG_ARCH_MISC_INIT
+
+#define CONFIG_PCI_PNP
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial,usbkbd,vga\0" \
+					"stdout=serial,vga\0" \
+					"stderr=serial,vga\0"
+
+#define CONFIG_SCSI_DEV_LIST		\
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
+
+#define VIDEO_IO_OFFSET				0
+#define CONFIG_X86EMU_RAW_IO
+
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OFFSET		0x006ef000
+
+#endif	/* __CONFIG_H */