Blackfin: blackstamp: new board port

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

9 files changed, 562 insertions, 2 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0b3ea1aecb..d75598d381 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -888,6 +888,11 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org>
 	BF537-minotaur	BF537
 	BF537-srv1	BF537
 
+Wojtek Skulski <skulski@pas.rochester.edu>
+Benjamin Matthews <mben12@gmail.com>
+
+	BLACKSTAMP	BF532
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
diff --git a/MAKEALL b/MAKEALL
index 749077787e..3245e8e73f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -809,6 +809,7 @@ LIST_blackfin="		\
 	bf538f-ezkit	\
 	bf548-ezkit	\
 	bf561-ezkit	\
+	blackstamp	\
 	cm-bf527	\
 	cm-bf533	\
 	cm-bf537e	\
diff --git a/Makefile b/Makefile
index c05a6b3b65..39ebfe2bbe 100644
--- a/Makefile
+++ b/Makefile
@@ -3394,7 +3394,7 @@ BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537
 
 # Misc third party boards
-BFIN_BOARDS += bf537-minotaur bf537-srv1
+BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
 
 $(BFIN_BOARDS:%=%_config)	: unconfig
 	@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
@@ -3570,7 +3570,7 @@ clean:
 	       $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
 	       $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \
 	       $(obj)board/bf5{33,37}-stamp/u-boot.lds			  \
-	       $(obj)board/bf537-{minotaur,pnav,srv1}/u-boot.lds	  \
+	       $(obj)board/{bf537-{minotaur,pnav,srv1},blackstamp}/u-boot.lds \
 	       $(obj)board/{,t}cm-bf5{27,33,37e,48,61}/u-boot.lds	  \
 	       $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
 	@rm -f $(obj)include/bmp_logo.h
diff --git a/board/blackstamp/.gitignore b/board/blackstamp/.gitignore
new file mode 100644
index 0000000000..945f324549
--- /dev/null
+++ b/board/blackstamp/.gitignore
@@ -0,0 +1 @@
+/u-boot.lds
diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile
new file mode 100644
index 0000000000..1b217288b9
--- /dev/null
+++ b/board/blackstamp/Makefile
@@ -0,0 +1,57 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	:= $(BOARD).o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c
new file mode 100644
index 0000000000..b671899e06
--- /dev/null
+++ b/board/blackstamp/blackstamp.c
@@ -0,0 +1,46 @@
+/*
+ * U-boot - blackstamp.c BlackStamp board specific routines
+ * Most code stolen from boards/bf533-stamp/bf533-stamp.c
+ * Edited to the BlackStamp by Ben Matthews for UR LLE
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	printf("Board: BlackStamp\n");
+	printf("Support: http://blackfin.uclinux.org/gf/project/blackstamp/\n");
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+	return gd->bd->bi_memsize;
+}
+
+#ifdef SHARED_RESOURCES
+void swap_to(int device_id)
+{
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	SSYNC();
+	if (device_id == ETHERNET)
+		bfin_write_FIO_FLAG_S(PF0);
+	else if (device_id == FLASH)
+		bfin_write_FIO_FLAG_C(PF0);
+	else
+		printf("Unknown device to switch\n");
+	SSYNC();
+}
+#endif
diff --git a/board/blackstamp/config.mk b/board/blackstamp/config.mk
new file mode 100644
index 0000000000..f4a5a80283
--- /dev/null
+++ b/board/blackstamp/config.mk
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# This is not actually used for Blackfin boards so do not change it
+#TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/blackstamp/u-boot.lds.S b/board/blackstamp/u-boot.lds.S
new file mode 100644
index 0000000000..8ddfa81dad
--- /dev/null
+++ b/board/blackstamp/u-boot.lds.S
@@ -0,0 +1,143 @@
+/*
+ * U-boot - u-boot.lds.S
+ *
+ * Copyright (c) 2005-2008 Analog Device Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/blackfin.h>
+#undef ALIGN
+#undef ENTRY
+#undef bfin
+
+/* If we don't actually load anything into L1 data, this will avoid
+ * a syntax error.  If we do actually load something into L1 data,
+ * we'll get a linker memory load error (which is what we'd want).
+ * This is here in the first place so we can quickly test building
+ * for different CPU's which may lack non-cache L1 data.
+ */
+#ifndef L1_DATA_B_SRAM
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
+# define L1_DATA_B_SRAM_SIZE 0
+#endif
+
+OUTPUT_ARCH(bfin)
+
+MEMORY
+{
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
+}
+
+ENTRY(_start)
+SECTIONS
+{
+	.text :
+	{
+		cpu/blackfin/start.o (.text .text.*)
+
+#ifdef ENV_IS_EMBEDDED
+		/* WARNING - the following is hand-optimized to fit within
+		 * the sector before the environment sector. If it throws
+		 * an error during compilation remove an object here to get
+		 * it linked after the configuration sector.
+		 */
+
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
+
+		. = DEFINED(env_offset) ? env_offset : .;
+		common/env_embedded.o	(.text .text.*)
+#endif
+
+		__initcode_start = .;
+		cpu/blackfin/initcode.o (.text .text.*)
+		__initcode_end = .;
+
+		*(.text .text.*)
+	} >ram
+
+	.rodata :
+	{
+		. = ALIGN(4);
+		*(.rodata .rodata.*)
+		*(.rodata1)
+		*(.eh_frame)
+		. = ALIGN(4);
+	} >ram
+
+	.data :
+	{
+		. = ALIGN(256);
+		*(.data .data.*)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.dynamic)
+		CONSTRUCTORS
+	} >ram
+
+	.u_boot_cmd :
+	{
+		___u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		___u_boot_cmd_end = .;
+	} >ram
+
+	.text_l1 :
+	{
+		. = ALIGN(4);
+		__stext_l1 = .;
+		*(.l1.text)
+		. = ALIGN(4);
+		__etext_l1 = .;
+	} >l1_code AT>ram
+	__stext_l1_lma = LOADADDR(.text_l1);
+
+	.data_l1 :
+	{
+		. = ALIGN(4);
+		__sdata_l1 = .;
+		*(.l1.data)
+		*(.l1.bss)
+		. = ALIGN(4);
+		__edata_l1 = .;
+	} >l1_data AT>ram
+	__sdata_l1_lma = LOADADDR(.data_l1);
+
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.sbss) *(.scommon)
+		*(.dynbss)
+		*(.bss .bss.*)
+		*(COMMON)
+		__bss_end = .;
+	} >ram
+}
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
new file mode 100644
index 0000000000..f61e5b7f9c
--- /dev/null
+++ b/include/configs/blackstamp.h
@@ -0,0 +1,275 @@
+/*
+ * U-boot - Configuration file for BlackStamp board
+ * Configuration by Ben Matthews for UR LLE using bf533-stamp.h
+ * as a template
+ * See http://blackfin.uclinux.org/gf/project/blackstamp/
+ */
+
+#ifndef __CONFIG_BLACKSTAMP_H__
+#define __CONFIG_BLACKSTAMP_H__
+
+#include <asm/blackfin-config-pre.h>
+
+/*
+ * Debugging: Set these options if you're having problems
+ */
+/*
+ * #define CONFIG_DEBUG_EARLY_SERIAL
+ * #define DEBUG
+ * #define CONFIG_DEBUG_DUMP
+ * #define CONFIG_DEBUG_DUMP_SYMS
+*/
+#define CONFIG_PANIC_HANG 0
+
+/* CPU Options
+ * Be sure to set the Silicon Revision Correctly
+ */
+#define CONFIG_BFIN_CPU		bf532-0.5
+#define CONFIG_BFIN_BOOT_MODE	BFIN_BOOT_SPI_MASTER
+
+/*
+ * Board settings
+ */
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20300300
+
+/* FLASH/ETHERNET uses the same address range
+ * Depending on what you have the CPLD doing
+ * this probably isn't needed
+ */
+#define SHARED_RESOURCES	1
+
+/* Is I2C bit-banged? */
+#undef CONFIG_SOFT_I2
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			25000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			16
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			3
+
+/*
+ * Network settings
+ */
+
+#ifdef CONFIG_DRIVER_SMC91111
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		blackstamp
+#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
+#define CONFIG_SYS_AUTOLOAD		"no"
+
+/* To remove hardcoding and enable MAC storage in EEPROM  */
+/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
+#endif
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x40000
+#define ENV_IS_EMBEDDED_CUSTOM
+
+/*
+ * SDRAM settings & memory map
+ */
+
+#define CONFIG_MEM_SIZE		64	/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH	10	/* 8, 9, 10, 11    */
+
+#define CONFIG_SYS_MONITOR_LEN	(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN	(384 << 10)
+
+/*
+ * Command settings
+ */
+
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE	1
+#define CONFIG_ENV_OVERWRITE	1
+
+#include <config_cmd_default.h>
+
+#ifdef CONFIG_DRIVER_SMC91111
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_PING
+#else
+# undef CONFIG_CMD_NET
+#endif
+
+#ifdef CONFIG_SOFT_I2C
+# define CONFIG_CMD_I2C
+#endif
+
+#define CONFIG_CMD_BOOTLDR
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CPLBINFO
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_ELF
+
+#define CONFIG_BOOTDELAY     5
+#define CONFIG_BOOTCOMMAND   "run ramboot"
+#define CONFIG_BOOTARGS \
+	"root=/dev/mtdblock0 rw " \
+	"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+	"earlyprintk=" \
+		"serial," \
+		"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
+		MK_STR(CONFIG_BAUDRATE) " " \
+	"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+
+#if defined(CONFIG_CMD_NET)
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#  define UBOOT_ENV_FILE "u-boot.bin"
+# else
+#  define UBOOT_ENV_FILE "u-boot.ldr"
+# endif
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#  ifdef CONFIG_SPI
+#   define UBOOT_ENV_UPDATE \
+		"eeprom write $(loadaddr) 0x0 $(filesize)"
+#  else
+#   define UBOOT_ENV_UPDATE \
+		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf erase 0 0x40000;" \
+		"sf write $(loadaddr) 0 $(filesize)"
+#  endif
+# else
+#  define UBOOT_ENV_UPDATE \
+		"protect off 0x20000000 0x2003FFFF;" \
+		"erase 0x20000000 0x2003FFFF;" \
+		"cp.b $(loadaddr) 0x20000000 $(filesize)"
+# endif
+# define NETWORK_ENV_SETTINGS \
+	"ubootfile=" UBOOT_ENV_FILE "\0" \
+	"update=" \
+		"tftp $(loadaddr) $(ubootfile);" \
+		UBOOT_ENV_UPDATE \
+		"\0" \
+	"addip=set bootargs $(bootargs) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
+		   "$(hostname):eth0:off" \
+		"\0" \
+	"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
+	"ramboot=" \
+		"tftp $(loadaddr) uImage;" \
+		"run ramargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0" \
+	"nfsargs=set bootargs " \
+		"root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
+		"\0" \
+	"nfsboot=" \
+		"tftp $(loadaddr) vmImage;" \
+		"run nfsargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0"
+#else
+# define NETWORK_ENV_SETTINGS
+#endif
+
+/*
+ * Console settings
+ */
+#define CONFIG_BAUDRATE		57600
+#define CONFIG_LOADS_ECHO	1
+#define CONFIG_UART_CONSOLE	0
+
+/*
+ * I2C settings
+ * By default PF2 is used as SDA and PF3 as SCL on the Stamp board
+ * Located on the expansion connector on pins 86/85
+ * Note these pins are arbitrarily chosen because we aren't using
+ * them yet. You can (and probably should) change these values!
+ */
+#ifdef CONFIG_SOFT_I2C
+
+#define PF_SCL			PF9
+#define PF_SDA			PF8
+
+#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
+#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
+#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
+#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
+#define I2C_SDA(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SDA; \
+		else \
+			*pFIO_FLAG_C = PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_SCL(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SCL; \
+		else \
+			*pFIO_FLAG_C = PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0xFE
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_RTC_BFIN		1
+
+/*
+ * Serial Flash Infomation
+ */
+#define CONFIG_BFIN_SPI
+/* For the M25P64 SCK Should be Kept < 20Mhz */
+#define CONFIG_ENV_SPI_MAX_HZ	20000000
+#define CONFIG_SF_DEFAULT_HZ	20000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+/*
+ * FLASH organization and environment definitions
+ */
+
+#define CONFIG_EBIU_AMGCTL_VAL		0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL		0xBBC3BBC3
+#define CONFIG_EBIU_AMBCTL1_VAL		0x99B39983
+#define CONFIG_EBIU_SDRRC_VAL		0x268
+#define CONFIG_EBIU_SDGCTL_VAL		0x911109
+
+/* Even though Rev C boards have Parallel Flash
+ * We aren't supporting it. Newer versions of the
+ * hardware don't support Parallel Flash at all.
+ */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_FLASH
+
+#include <asm/blackfin-config-post.h>
+
+#endif