net: phy: aquantia: add firmware loading support

Aquantia phys have firmware that can be loaded automatically
from storage directly attached to the phy or via MDIO commands.
Add support for loading firmware from either a file or a
raw location on an MMC device.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

2 files changed, 256 insertions, 2 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 28f3ee35f1..3dc0822d9c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -64,11 +64,33 @@ endif # MV88E61XX_SWITCH
 config PHYLIB_10G
 	bool "Generic 10G PHY support"
 
-config PHY_AQUANTIA
+menuconfig PHY_AQUANTIA
 	bool "Aquantia Ethernet PHYs support"
 	select PHY_GIGE
 	select PHYLIB_10G
 
+config PHY_AQUANTIA_UPLOAD_FW
+	bool "Aquantia firmware loading support"
+	default n
+	depends on PHY_AQUANTIA
+	help
+		Aquantia PHYs use firmware which can be either loaded automatically
+		from storage directly attached to the phy or loaded by the boot loader
+		via MDIO commands.  The firmware is loaded from a file, specified by
+		the PHY_AQUANTIA_FW_PART and PHY_AQUANTIA_FW_NAME options.
+
+config PHY_AQUANTIA_FW_PART
+	string "Aquantia firmware partition"
+	depends on PHY_AQUANTIA_UPLOAD_FW
+	help
+		Partition containing the firmware file.
+
+config PHY_AQUANTIA_FW_NAME
+	string "Aquantia firmware filename"
+	depends on PHY_AQUANTIA_UPLOAD_FW
+	help
+		Firmware filename.
+
 config PHY_ATHEROS
 	bool "Atheros Ethernet PHYs support"
 
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index a44fba0f1a..cbd70120d1 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -8,6 +8,10 @@
 #include <common.h>
 #include <dm.h>
 #include <phy.h>
+#include <crc.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <fs.h>
 
 #define AQUNTIA_10G_CTL		0x20
 #define AQUNTIA_VENDOR_P1	0xc400
@@ -15,9 +19,237 @@
 #define AQUNTIA_SPEED_LSB_MASK	0x2000
 #define AQUNTIA_SPEED_MSB_MASK	0x40
 
+/* registers in MDIO_MMD_VEND1 region */
+#define GLOBAL_FIRMWARE_ID 0x20
+#define GLOBAL_FAULT 0xc850
+#define GLOBAL_RSTATUS_1 0xc885
+
+#define GLOBAL_STANDARD_CONTROL 0x0
+#define SOFT_RESET BIT(15)
+#define LOW_POWER BIT(11)
+
+#define MAILBOX_CONTROL 0x0200
+#define MAILBOX_EXECUTE BIT(15)
+#define MAILBOX_WRITE BIT(14)
+#define MAILBOX_RESET_CRC BIT(12)
+#define MAILBOX_BUSY BIT(8)
+
+#define MAILBOX_CRC 0x0201
+
+#define MAILBOX_ADDR_MSW 0x0202
+#define MAILBOX_ADDR_LSW 0x0203
+
+#define MAILBOX_DATA_MSW 0x0204
+#define MAILBOX_DATA_LSW 0x0205
+
+#define UP_CONTROL 0xc001
+#define UP_RESET BIT(15)
+#define UP_RUN_STALL_OVERRIDE BIT(6)
+#define UP_RUN_STALL BIT(0)
+
+/* addresses of memory segments in the phy */
+#define DRAM_BASE_ADDR 0x3FFE0000
+#define IRAM_BASE_ADDR 0x40000000
+
+/* firmware image format constants */
+#define VERSION_STRING_SIZE 0x40
+#define VERSION_STRING_OFFSET 0x0200
+#define HEADER_OFFSET 0x300
+
+#pragma pack(1)
+struct fw_header {
+	u8 padding[4];
+	u8 iram_offset[3];
+	u8 iram_size[3];
+	u8 dram_offset[3];
+	u8 dram_size[3];
+};
+
+#pragma pack()
+
+#if defined(CONFIG_PHY_AQUANTIA_UPLOAD_FW)
+static int aquantia_read_fw(u8 **fw_addr, size_t *fw_length)
+{
+	loff_t length, read;
+	int ret;
+	void *addr = NULL;
+
+	*fw_addr = NULL;
+	*fw_length = 0;
+	debug("Loading Acquantia microcode from %s %s\n",
+	      CONFIG_PHY_AQUANTIA_FW_PART, CONFIG_PHY_AQUANTIA_FW_NAME);
+	ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY);
+	if (ret < 0)
+		goto cleanup;
+
+	ret = fs_size(CONFIG_PHY_AQUANTIA_FW_NAME, &length);
+	if (ret < 0)
+		goto cleanup;
+
+	addr = malloc(length);
+	if (!addr) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY);
+	if (ret < 0)
+		goto cleanup;
+
+	ret = fs_read(CONFIG_PHY_AQUANTIA_FW_NAME, (ulong)addr, 0, length,
+		      &read);
+	if (ret < 0)
+		goto cleanup;
+
+	*fw_addr = addr;
+	*fw_length = length;
+	debug("Found Acquantia microcode.\n");
+
+cleanup:
+	if (ret < 0) {
+		printf("loading firmware file %s %s failed with error %d\n",
+		       CONFIG_PHY_AQUANTIA_FW_PART,
+		       CONFIG_PHY_AQUANTIA_FW_NAME, ret);
+		free(addr);
+	}
+	return ret;
+}
+
+/* load data into the phy's memory */
+static int aquantia_load_memory(struct phy_device *phydev, u32 addr,
+				const u8 *data, size_t len)
+{
+	size_t pos;
+	u16 crc = 0, up_crc;
+
+	phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_CONTROL, MAILBOX_RESET_CRC);
+	phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_ADDR_MSW, addr >> 16);
+	phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_ADDR_LSW, addr & 0xfffc);
+
+	for (pos = 0; pos < len; pos += min(sizeof(u32), len - pos)) {
+		u32 word = 0;
+
+		memcpy(&word, &data[pos], min(sizeof(u32), len - pos));
+
+		phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_DATA_MSW,
+			  (word >> 16));
+		phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_DATA_LSW,
+			  word & 0xffff);
+
+		phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_CONTROL,
+			  MAILBOX_EXECUTE | MAILBOX_WRITE);
+
+		/* keep a big endian CRC to match the phy processor */
+		word = cpu_to_be32(word);
+		crc = crc16_ccitt(crc, (u8 *)&word, sizeof(word));
+	}
+
+	up_crc = phy_read(phydev, MDIO_MMD_VEND1, MAILBOX_CRC);
+	if (crc != up_crc) {
+		printf("%s crc mismatch: calculated 0x%04hx phy 0x%04hx\n",
+		       phydev->dev->name, crc, up_crc);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static u32 unpack_u24(const u8 *data)
+{
+	return (data[2] << 16) + (data[1] << 8) + data[0];
+}
+
+static int aquantia_upload_firmware(struct phy_device *phydev)
+{
+	int ret;
+	u8 *addr = NULL;
+	size_t fw_length = 0;
+	u16 calculated_crc, read_crc;
+	char version[VERSION_STRING_SIZE];
+	u32 primary_offset, iram_offset, iram_size, dram_offset, dram_size;
+	const struct fw_header *header;
+
+	ret = aquantia_read_fw(&addr, &fw_length);
+	if (ret != 0)
+		return ret;
+
+	read_crc = (addr[fw_length - 2] << 8)  | addr[fw_length - 1];
+	calculated_crc = crc16_ccitt(0, addr, fw_length - 2);
+	if (read_crc != calculated_crc) {
+		printf("%s bad firmware crc: file 0x%04x calculated 0x%04x\n",
+		       phydev->dev->name, read_crc, calculated_crc);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/* Find the DRAM and IRAM sections within the firmware file. */
+	primary_offset = ((addr[9] & 0xf) << 8 | addr[8]) << 12;
+
+	header = (struct fw_header *)&addr[primary_offset + HEADER_OFFSET];
+
+	iram_offset = primary_offset + unpack_u24(header->iram_offset);
+	iram_size = unpack_u24(header->iram_size);
+
+	dram_offset = primary_offset + unpack_u24(header->dram_offset);
+	dram_size = unpack_u24(header->dram_size);
+
+	debug("primary %d iram offset=%d size=%d dram offset=%d size=%d\n",
+	      primary_offset, iram_offset, iram_size, dram_offset, dram_size);
+
+	strlcpy(version, (char *)&addr[dram_offset + VERSION_STRING_OFFSET],
+		VERSION_STRING_SIZE);
+	printf("%s loading firmare version '%s'\n", phydev->dev->name, version);
+
+	/* stall the microcprocessor */
+	phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL,
+		  UP_RUN_STALL | UP_RUN_STALL_OVERRIDE);
+
+	debug("loading dram 0x%08x from offset=%d size=%d\n",
+	      DRAM_BASE_ADDR, dram_offset, dram_size);
+	ret = aquantia_load_memory(phydev, DRAM_BASE_ADDR, &addr[dram_offset],
+				   dram_size);
+	if (ret != 0)
+		goto done;
+
+	debug("loading iram 0x%08x from offset=%d size=%d\n",
+	      IRAM_BASE_ADDR, iram_offset, iram_size);
+	ret = aquantia_load_memory(phydev, IRAM_BASE_ADDR, &addr[iram_offset],
+				   iram_size);
+	if (ret != 0)
+		goto done;
+
+	/* make sure soft reset and low power mode are clear */
+	phy_write(phydev, MDIO_MMD_VEND1, GLOBAL_STANDARD_CONTROL, 0);
+
+	/* Release the microprocessor. UP_RESET must be held for 100 usec. */
+	phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL,
+		  UP_RUN_STALL | UP_RUN_STALL_OVERRIDE | UP_RESET);
+
+	udelay(100);
+
+	phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL, UP_RUN_STALL_OVERRIDE);
+
+	printf("%s firmare loading done.\n", phydev->dev->name);
+done:
+	free(addr);
+	return ret;
+}
+#else
+static int aquantia_upload_firmware(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif
+
 int aquantia_config(struct phy_device *phydev)
 {
-	u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
+	u32 val;
+	int ret;
+
+	ret = aquantia_upload_firmware(phydev);
+	if (ret != 0)
+		return ret;
+
+	val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
 
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 		/* 1000BASE-T mode */