stm32mp: stm32prog: add serial link support

Add a support of UART, using the same protocol than MCU STM32.

See "AN5275: USB DFU/USART protocols used in STM32MP1 Series
bootloaders" for details.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

6 files changed, 1021 insertions, 1 deletions

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile
index 14f722759c..548a378921 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile
@@ -5,4 +5,5 @@
 
 obj-y += cmd_stm32prog.o
 obj-y += stm32prog.o
+obj-y += stm32prog_serial.o
 obj-y += stm32prog_usb.o
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
index 581f97e0b5..1769ba05f2 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
@@ -25,11 +25,14 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc,
 
 	if (!strcmp(argv[1], "usb"))
 		link = LINK_USB;
+	else if (!strcmp(argv[1], "serial"))
+		link = LINK_SERIAL;
 
 	if (link == LINK_UNDEFINED) {
 		pr_err("not supported link=%s\n", argv[1]);
 		return CMD_RET_USAGE;
 	}
+
 	dev = (int)simple_strtoul(argv[2], NULL, 10);
 
 	addr = STM32_DDR_BASE;
@@ -60,6 +63,12 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc,
 		goto cleanup;
 
 	switch (link) {
+	case LINK_SERIAL:
+		ret = stm32prog_serial_init(data, dev);
+		if (ret)
+			goto cleanup;
+		reset = stm32prog_serial_loop(data);
+		break;
 	case LINK_USB:
 		reset = stm32prog_usb_loop(data, dev);
 		break;
@@ -90,7 +99,7 @@ cleanup:
 U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog,
 	   "<link> <dev> [<addr>] [<size>]\n"
 	   "start communication with tools STM32Cubeprogrammer on <link> with Flashlayout at <addr>",
-	   "<link> = usb\n"
+	   "<link> = serial|usb\n"
 	   "<dev>  = device instance\n"
 	   "<addr> = address of flashlayout\n"
 	   "<size> = size of flashlayout\n"
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
index d127afefaa..0967bbc11a 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
@@ -1486,6 +1486,7 @@ void stm32prog_next_phase(struct stm32prog_data *data)
 	}
 
 	/* found next selected partition */
+	data->dfu_seq = 0;
 	data->cur_part = NULL;
 	data->phase = PHASE_END;
 	found = false;
@@ -1653,6 +1654,7 @@ int stm32prog_dfu_init(struct stm32prog_data *data)
 int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size)
 {
 	memset(data, 0x0, sizeof(*data));
+	data->read_phase = PHASE_RESET;
 	data->phase = PHASE_FLASHLAYOUT;
 
 	return parse_flash_layout(data, addr, size);
@@ -1664,6 +1666,7 @@ void stm32prog_clean(struct stm32prog_data *data)
 	dfu_free_entities();
 	free(data->part_array);
 	free(data->otp_part);
+	free(data->buffer);
 	free(data->header_data);
 }
 
@@ -1709,6 +1712,7 @@ void dfu_initiated_callback(struct dfu_entity *dfu)
 	/* force the saved offset for the current partition */
 	if (dfu->alt == stm32prog_data->cur_part->alt_id) {
 		dfu->offset = stm32prog_data->offset;
+		stm32prog_data->dfu_seq = 0;
 		pr_debug("dfu offset = 0x%llx\n", dfu->offset);
 	}
 }
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index 83b27980f5..c4fdb5b8c3 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -31,6 +31,7 @@ enum stm32prog_target {
 };
 
 enum stm32prog_link_t {
+	LINK_SERIAL,
 	LINK_USB,
 	LINK_UNDEFINED,
 };
@@ -127,6 +128,14 @@ struct stm32prog_data {
 	/* STM32 header information */
 	struct raw_header_s	*header_data;
 	struct image_header_s	header;
+
+	/* SERIAL information */
+	u32	cursor;
+	u32	packet_number;
+	u32	checksum;
+	u8	*buffer; /* size = USART_RAM_BUFFER_SIZE*/
+	int	dfu_seq;
+	u8	read_phase;
 };
 
 extern struct stm32prog_data *stm32prog_data;
@@ -163,6 +172,8 @@ char *stm32prog_get_error(struct stm32prog_data *data);
 
 /* Main function */
 int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size);
+int stm32prog_serial_init(struct stm32prog_data *data, int link_dev);
+bool stm32prog_serial_loop(struct stm32prog_data *data);
 bool stm32prog_usb_loop(struct stm32prog_data *data, int dev);
 void stm32prog_clean(struct stm32prog_data *data);
 
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
new file mode 100644
index 0000000000..5a16979adc
--- /dev/null
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <console.h>
+#include <dfu.h>
+#include <malloc.h>
+#include <serial.h>
+#include <watchdog.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include "stm32prog.h"
+
+/* - configuration part -----------------------------*/
+#define USART_BL_VERSION	0x40	/* USART bootloader version V4.0*/
+#define UBOOT_BL_VERSION	0x03	/* bootloader version V0.3*/
+#define DEVICE_ID_BYTE1		0x05	/* MSB byte of device ID*/
+#define DEVICE_ID_BYTE2		0x00	/* LSB byte of device ID*/
+#define USART_RAM_BUFFER_SIZE	256	/* Size of USART_RAM_Buf buffer*/
+
+/* - Commands -----------------------------*/
+#define GET_CMD_COMMAND		0x00	/* Get CMD command*/
+#define GET_VER_COMMAND		0x01	/* Get Version command*/
+#define GET_ID_COMMAND		0x02	/* Get ID command*/
+#define GET_PHASE_COMMAND	0x03	/* Get Phase command*/
+#define RM_COMMAND		0x11	/* Read Memory command*/
+#define READ_PART_COMMAND	0x12	/* Read Partition command*/
+#define START_COMMAND		0x21	/* START command (Go)*/
+#define DOWNLOAD_COMMAND	0x31	/* Download command*/
+/* existing command for other STM32 but not used */
+/* ERASE			0x43 */
+/* EXTENDED_ERASE		0x44 */
+/* WRITE_UNPROTECTED		0x73 */
+/* READOUT_PROTECT		0x82 */
+/* READOUT_UNPROTECT		0x92 */
+
+/* - miscellaneous defines ----------------------------------------*/
+#define INIT_BYTE		0x7F	/*Init Byte ID*/
+#define ACK_BYTE		0x79	/*Acknowlede Byte ID*/
+#define NACK_BYTE		0x1F	/*No Acknowlede Byte ID*/
+#define ABORT_BYTE		0x5F	/*ABORT*/
+
+struct udevice *down_serial_dev;
+
+const u8 cmd_id[] = {
+	GET_CMD_COMMAND,
+	GET_VER_COMMAND,
+	GET_ID_COMMAND,
+	GET_PHASE_COMMAND,
+	RM_COMMAND,
+	READ_PART_COMMAND,
+	START_COMMAND,
+	DOWNLOAD_COMMAND
+};
+
+#define NB_CMD sizeof(cmd_id)
+
+/* DFU support for serial *********************************************/
+static struct dfu_entity *stm32prog_get_entity(struct stm32prog_data *data)
+{
+	int alt_id;
+
+	if (!data->cur_part)
+		if (data->phase == PHASE_FLASHLAYOUT)
+			alt_id = 0;
+		else
+			return NULL;
+	else
+		alt_id = data->cur_part->alt_id;
+
+	return dfu_get_entity(alt_id);
+}
+
+static int stm32prog_write(struct stm32prog_data *data, u8 *buffer,
+			   u32 buffer_size)
+{
+	struct dfu_entity *dfu_entity;
+	u8 ret = 0;
+
+	dfu_entity = stm32prog_get_entity(data);
+	if (!dfu_entity)
+		return -ENODEV;
+
+	ret = dfu_write(dfu_entity,
+			buffer,
+			buffer_size,
+			data->dfu_seq);
+
+	if (ret) {
+		stm32prog_err("DFU write failed [%d] cnt: %d",
+			      ret, data->dfu_seq);
+	}
+	data->dfu_seq++;
+	/* handle rollover as in driver/dfu/dfu.c */
+	data->dfu_seq &= 0xffff;
+	if (buffer_size == 0)
+		data->dfu_seq = 0; /* flush done */
+
+	return ret;
+}
+
+static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset,
+			  u8 *buffer, u32 buffer_size)
+{
+	struct dfu_entity *dfu_entity;
+	struct stm32prog_part_t *part;
+	u32 size;
+	int ret, i;
+
+	if (data->dfu_seq) {
+		stm32prog_err("DFU write pending for phase %d, seq %d",
+			      data->phase, data->dfu_seq);
+		return -EINVAL;
+	}
+	if (phase == PHASE_FLASHLAYOUT || phase > PHASE_LAST_USER) {
+		stm32prog_err("read failed : phase %d is invalid", phase);
+		return -EINVAL;
+	}
+	if (data->read_phase <= PHASE_LAST_USER &&
+	    phase != data->read_phase) {
+		/* clear previous read session */
+		dfu_entity = dfu_get_entity(data->read_phase - 1);
+		if (dfu_entity)
+			dfu_transaction_cleanup(dfu_entity);
+	}
+
+	dfu_entity = NULL;
+	/* found partition for the expected phase */
+	for (i = 0; i < data->part_nb; i++) {
+		part = &data->part_array[i];
+		if (part->id == phase)
+			dfu_entity = dfu_get_entity(part->alt_id);
+	}
+	if (!dfu_entity) {
+		stm32prog_err("read failed : phase %d is unknown", phase);
+		return -ENODEV;
+	}
+
+	/* clear pending read before to force offset */
+	if (dfu_entity->inited &&
+	    (data->read_phase != phase || data->offset != offset))
+		dfu_transaction_cleanup(dfu_entity);
+
+	/* initiate before to force offset */
+	if (!dfu_entity->inited) {
+		ret = dfu_transaction_initiate(dfu_entity, true);
+			if (ret < 0) {
+				stm32prog_err("DFU read init failed [%d] phase = %d offset = 0x%08x",
+					      ret, phase, offset);
+			return ret;
+		}
+	}
+	/* force new offset */
+	if (dfu_entity->offset != offset)
+		dfu_entity->offset = offset;
+	data->offset = offset;
+	data->read_phase = phase;
+	pr_debug("\nSTM32 download read %s offset=0x%x\n",
+		 dfu_entity->name, offset);
+	ret = dfu_read(dfu_entity, buffer, buffer_size,
+		       dfu_entity->i_blk_seq_num);
+	if (ret < 0) {
+		stm32prog_err("DFU read failed [%d] phase = %d offset = 0x%08x",
+			      ret, phase, offset);
+		return ret;
+	}
+
+	size = ret;
+
+	if (size < buffer_size) {
+		data->offset = 0;
+		data->read_phase = PHASE_END;
+		memset(buffer + size, 0, buffer_size - size);
+	} else {
+		data->offset += size;
+	}
+
+	return ret;
+}
+
+/* UART access ***************************************************/
+int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
+{
+	struct udevice *dev = NULL;
+	int node;
+	char alias[10];
+	const char *path;
+	struct dm_serial_ops *ops;
+	/* no parity, 8 bits, 1 stop */
+	u32 serial_config = SERIAL_DEFAULT_CONFIG;
+
+	down_serial_dev = NULL;
+
+	sprintf(alias, "serial%d", link_dev);
+	path = fdt_get_alias(gd->fdt_blob, alias);
+	if (!path) {
+		pr_err("%s alias not found", alias);
+		return -ENODEV;
+	}
+	node = fdt_path_offset(gd->fdt_blob, path);
+	if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node,
+					    &dev)) {
+		down_serial_dev = dev;
+	} else if (node > 0 &&
+		   !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
+				   &dev, false)) {
+		if (!device_probe(dev))
+			down_serial_dev = dev;
+	}
+	if (!down_serial_dev) {
+		pr_err("%s = %s device not found", alias, path);
+		return -ENODEV;
+	}
+
+	/* force silent console on uart only when used */
+	if (gd->cur_serial_dev == down_serial_dev)
+		gd->flags |= GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT;
+	else
+		gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT);
+
+	ops = serial_get_ops(down_serial_dev);
+
+	if (!ops) {
+		pr_err("%s = %s missing ops", alias, path);
+		return -ENODEV;
+	}
+	if (!ops->setconfig) {
+		pr_err("%s = %s missing setconfig", alias, path);
+		return -ENODEV;
+	}
+
+	clrsetbits_le32(&serial_config, SERIAL_PAR_MASK, SERIAL_PAR_EVEN);
+
+	data->buffer = memalign(CONFIG_SYS_CACHELINE_SIZE,
+				USART_RAM_BUFFER_SIZE);
+
+	return ops->setconfig(down_serial_dev, serial_config);
+}
+
+static void stm32prog_serial_flush(void)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+	} while (err != -EAGAIN);
+}
+
+static int stm32prog_serial_getc_err(void)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+		if (err == -EAGAIN) {
+			ctrlc();
+			WATCHDOG_RESET();
+		}
+	} while ((err == -EAGAIN) && (!had_ctrlc()));
+
+	return err;
+}
+
+static u8 stm32prog_serial_getc(void)
+{
+	int err;
+
+	err = stm32prog_serial_getc_err();
+
+	return err >= 0 ? err : 0;
+}
+
+static bool stm32prog_serial_get_buffer(u8 *buffer, u32 *count)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->getc(down_serial_dev);
+		if (err >= 0) {
+			*buffer++ = err;
+			*count -= 1;
+		} else if (err == -EAGAIN) {
+			ctrlc();
+			WATCHDOG_RESET();
+		} else {
+			break;
+		}
+	} while (*count && !had_ctrlc());
+
+	return !!(err < 0);
+}
+
+static void stm32prog_serial_putc(u8 w_byte)
+{
+	struct dm_serial_ops *ops = serial_get_ops(down_serial_dev);
+	int err;
+
+	do {
+		err = ops->putc(down_serial_dev, w_byte);
+	} while (err == -EAGAIN);
+}
+
+/* Helper function ************************************************/
+
+static u8 stm32prog_header(struct stm32prog_data *data)
+{
+	u8 ret;
+	u8 boot = 0;
+	struct dfu_entity *dfu_entity;
+	u64 size = 0;
+
+	dfu_entity = stm32prog_get_entity(data);
+	if (!dfu_entity)
+		return -ENODEV;
+
+	printf("\nSTM32 download write %s\n", dfu_entity->name);
+
+	/* force cleanup to avoid issue with previous read */
+	dfu_transaction_cleanup(dfu_entity);
+
+	ret = stm32prog_header_check(data->header_data,
+				     &data->header);
+
+	/* no header : max size is partition size */
+	if (ret) {
+		dfu_entity->get_medium_size(dfu_entity, &size);
+		data->header.image_length = size;
+	}
+
+	/**** Flash the header if necessary for boot partition */
+	if (data->phase < PHASE_FIRST_USER)
+		boot = 1;
+
+	/* write header if boot partition */
+	if (boot) {
+		if (ret) {
+			stm32prog_err("invalid header (error %d)", ret);
+		} else {
+			ret = stm32prog_write(data,
+					      (u8 *)data->header_data,
+					      BL_HEADER_SIZE);
+		}
+	} else {
+		if (ret)
+			printf("  partition without checksum\n");
+		ret = 0;
+	}
+
+	free(data->header_data);
+	data->header_data = NULL;
+
+	return ret;
+}
+
+static u8 stm32prog_start(struct stm32prog_data *data, u32 address)
+{
+	u8 ret = 0;
+	struct dfu_entity *dfu_entity;
+
+	if (address < 0x100) {
+		if (address == PHASE_OTP)
+			return stm32prog_otp_start(data);
+
+		if (address == PHASE_PMIC)
+			return stm32prog_pmic_start(data);
+
+		if (address == PHASE_RESET || address == PHASE_END) {
+			data->cur_part = NULL;
+			data->dfu_seq = 0;
+			data->phase = address;
+			return 0;
+		}
+		if (address != data->phase) {
+			stm32prog_err("invalid received phase id %d, current phase is %d",
+				      (u8)address, (u8)data->phase);
+			return -EINVAL;
+		}
+	}
+	/* check the last loaded partition */
+	if (address == DEFAULT_ADDRESS || address == data->phase) {
+		switch (data->phase) {
+		case PHASE_END:
+		case PHASE_RESET:
+		case PHASE_DO_RESET:
+			data->cur_part = NULL;
+			data->phase = PHASE_DO_RESET;
+			return 0;
+		}
+		dfu_entity = stm32prog_get_entity(data);
+		if (!dfu_entity)
+			return -ENODEV;
+
+		if (data->dfu_seq) {
+			ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq);
+			data->dfu_seq = 0;
+			if (ret) {
+				stm32prog_err("DFU flush failed [%d]", ret);
+				return ret;
+			}
+		}
+		printf("\n  received length = 0x%x\n", data->cursor);
+		if (data->header.present) {
+			if (data->cursor !=
+			    (data->header.image_length + BL_HEADER_SIZE)) {
+				stm32prog_err("transmission interrupted (length=0x%x expected=0x%x)",
+					      data->cursor,
+					      data->header.image_length +
+					      BL_HEADER_SIZE);
+				return -EIO;
+			}
+			if (data->header.image_checksum != data->checksum) {
+				stm32prog_err("invalid checksum received (0x%x expected 0x%x)",
+					      data->checksum,
+					      data->header.image_checksum);
+				return -EIO;
+			}
+			printf("\n  checksum OK (0x%x)\n", data->checksum);
+		}
+
+		/* update DFU with received flashlayout */
+		if (data->phase == PHASE_FLASHLAYOUT)
+			stm32prog_dfu_init(data);
+	} else {
+		void (*entry)(void) = (void *)address;
+
+		printf("## Starting application at 0x%x ...\n", address);
+		(*entry)();
+		printf("## Application terminated\n");
+		ret = -ENOEXEC;
+	}
+
+	return ret;
+}
+
+/**
+ * get_address() - Get address if it is valid
+ *
+ * @tmp_xor:		Current xor value to update
+ * @return The address area
+ */
+static u32 get_address(u8 *tmp_xor)
+{
+	u32 address = 0x0;
+	u8 data;
+
+	data = stm32prog_serial_getc();
+	*tmp_xor ^= data;
+	address |= ((u32)data) << 24;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data) << 16;
+	*tmp_xor ^= data;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data) << 8;
+	*tmp_xor ^= data;
+
+	data = stm32prog_serial_getc();
+	address |= ((u32)data);
+	*tmp_xor ^= data;
+
+	return address;
+}
+
+static void stm32prog_serial_result(u8 result)
+{
+	/* always flush fifo before to send result */
+	stm32prog_serial_flush();
+	stm32prog_serial_putc(result);
+}
+
+/* Command -----------------------------------------------*/
+/**
+ * get_cmd_command() - Respond to Get command
+ *
+ * @data:		Current command context
+ */
+static void get_cmd_command(struct stm32prog_data *data)
+{
+	u32 counter = 0x0;
+
+	stm32prog_serial_putc(NB_CMD);
+	stm32prog_serial_putc(USART_BL_VERSION);
+
+	for (counter = 0; counter < NB_CMD; counter++)
+		stm32prog_serial_putc(cmd_id[counter]);
+
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_version_command() - Respond to Get Version command
+ *
+ * @data:		Current command context
+ */
+static void get_version_command(struct stm32prog_data *data)
+{
+	stm32prog_serial_putc(UBOOT_BL_VERSION);
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_id_command() - Respond to Get ID command
+ *
+ * @data:		Current command context
+ */
+static void get_id_command(struct stm32prog_data *data)
+{
+	/* Send Device IDCode */
+	stm32prog_serial_putc(0x1);
+	stm32prog_serial_putc(DEVICE_ID_BYTE1);
+	stm32prog_serial_putc(DEVICE_ID_BYTE2);
+	stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * get_phase_command() - Respond to Get phase
+ *
+ * @data:		Current command context
+ */
+static void get_phase_command(struct stm32prog_data *data)
+{
+	char *err_msg = NULL;
+	u8 i, length = 0;
+	u32 destination = DEFAULT_ADDRESS; /* destination address */
+	int phase = data->phase;
+
+	if (phase == PHASE_RESET || phase == PHASE_DO_RESET) {
+		err_msg = stm32prog_get_error(data);
+		length = strlen(err_msg);
+	}
+	if (phase == PHASE_FLASHLAYOUT)
+		destination = STM32_DDR_BASE;
+
+	stm32prog_serial_putc(length + 5);           /* Total length */
+	stm32prog_serial_putc(phase & 0xFF);         /* partition ID */
+	stm32prog_serial_putc(destination);          /* byte 1 of address */
+	stm32prog_serial_putc(destination >> 8);     /* byte 2 of address */
+	stm32prog_serial_putc(destination >> 16);    /* byte 3 of address */
+	stm32prog_serial_putc(destination >> 24);    /* byte 4 of address */
+
+	stm32prog_serial_putc(length);               /* Information length */
+	for (i = 0; i < length; i++)
+		stm32prog_serial_putc(err_msg[i]);
+	stm32prog_serial_result(ACK_BYTE);
+
+	if (phase == PHASE_RESET)
+		stm32prog_do_reset(data);
+}
+
+/**
+ * read_memory_command() - Read data from memory
+ *
+ * @data:		Current command context
+ */
+static void read_memory_command(struct stm32prog_data *data)
+{
+	u32 address = 0x0;
+	u8 rcv_data = 0x0, tmp_xor = 0x0;
+	u32 counter = 0x0;
+
+	/* Read memory address */
+	address = get_address(&tmp_xor);
+
+	/* If address memory is not received correctly */
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* Read the number of bytes to be received:
+	 * Max NbrOfData = Data + 1 = 256
+	 */
+	rcv_data = stm32prog_serial_getc();
+	tmp_xor = ~rcv_data;
+	if (stm32prog_serial_getc() != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+
+	/* If checksum is correct send ACK */
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* Send data to the host:
+	 * Number of data to read = data + 1
+	 */
+	for (counter = (rcv_data + 1); counter != 0; counter--)
+		stm32prog_serial_putc(*(u8 *)(address++));
+}
+
+/**
+ * start_command() - Respond to start command
+ *
+ * Jump to user application in RAM or partition check
+ *
+ * @data:		Current command context
+ */
+static void start_command(struct stm32prog_data *data)
+{
+	u32 address = 0;
+	u8 tmp_xor = 0x0;
+	u8 ret, rcv_data;
+
+	/* Read memory address */
+	address = get_address(&tmp_xor);
+
+	/* If address memory is not received correctly */
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		stm32prog_serial_result(NACK_BYTE);
+		return;
+	}
+	/* validate partition */
+	ret = stm32prog_start(data,
+			      address);
+
+	if (ret)
+		stm32prog_serial_result(ABORT_BYTE);
+	else
+		stm32prog_serial_result(ACK_BYTE);
+}
+
+/**
+ * download_command() - Respond to download command
+ *
+ * Write data to not volatile memory, Flash
+ *
+ * @data:		Current command context
+ */
+static void download_command(struct stm32prog_data *data)
+{
+	u32 address = 0x0;
+	u8 my_xor = 0x0;
+	u8 rcv_xor;
+	u32 counter = 0x0, codesize = 0x0;
+	u8 *ramaddress = 0;
+	u8 rcv_data = 0x0;
+	struct image_header_s *image_header = &data->header;
+	u32 cursor = data->cursor;
+	long size = 0;
+	u8 operation;
+	u32 packet_number;
+	u32 result = ACK_BYTE;
+	u8 ret;
+	unsigned int i;
+	bool error;
+	int rcv;
+
+	address = get_address(&my_xor);
+
+	/* If address memory is not received correctly */
+	rcv_xor = stm32prog_serial_getc();
+	if (rcv_xor != my_xor) {
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* If address valid send ACK */
+	stm32prog_serial_result(ACK_BYTE);
+
+	/* get packet number and operation type */
+	operation = (u8)((u32)address >> 24);
+	packet_number = ((u32)(((u32)address << 8))) >> 8;
+
+	switch (operation) {
+	/* supported operation */
+	case PHASE_FLASHLAYOUT:
+	case PHASE_OTP:
+	case PHASE_PMIC:
+		break;
+	default:
+		result = NACK_BYTE;
+		goto end;
+	}
+	/* check the packet number */
+	if (packet_number == 0) {
+		/* erase: re-initialize the image_header struct */
+		data->packet_number = 0;
+		if (data->header_data)
+			memset(data->header_data, 0, BL_HEADER_SIZE);
+		else
+			data->header_data = calloc(1, BL_HEADER_SIZE);
+		cursor = 0;
+		data->cursor = 0;
+		data->checksum = 0;
+		/*idx = cursor;*/
+	} else {
+		data->packet_number++;
+	}
+
+	/* Check with the number of current packet if the device receive
+	 * the true packet
+	 */
+	if (packet_number != data->packet_number) {
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/*-- Read number of bytes to be written and data -----------*/
+
+	/* Read the number of bytes to be written:
+	 * Max NbrOfData = data + 1 <= 256
+	 */
+	rcv_data = stm32prog_serial_getc();
+
+	/* NbrOfData to write = data + 1 */
+	codesize = rcv_data + 0x01;
+
+	if (codesize > USART_RAM_BUFFER_SIZE) {
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Checksum Initialization */
+	my_xor = rcv_data;
+
+	/* UART receive data and send to Buffer */
+	counter = codesize;
+	error = stm32prog_serial_get_buffer(data->buffer, &counter);
+
+	/* read checksum */
+	if (!error) {
+		rcv = stm32prog_serial_getc_err();
+		error = !!(rcv < 0);
+		rcv_xor = rcv;
+	}
+
+	if (error) {
+		printf("transmission error on packet %d, byte %d\n",
+		       packet_number, codesize - counter);
+		/* waiting end of packet before flush & NACK */
+		mdelay(30);
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Compute Checksum */
+	ramaddress = data->buffer;
+	for (counter = codesize; counter != 0; counter--)
+		my_xor ^= *(ramaddress++);
+
+	/* If Checksum is incorrect */
+	if (rcv_xor != my_xor) {
+		printf("checksum error on packet %d\n",
+		       packet_number);
+		/* wait to be sure that all data are received
+		 * in the FIFO before flush
+		 */
+		mdelay(30);
+		data->packet_number--;
+		result = NACK_BYTE;
+		goto end;
+	}
+
+	/* Update current position in buffer */
+	data->cursor += codesize;
+
+	if (operation == PHASE_OTP) {
+		size = data->cursor - cursor;
+		/* no header for OTP */
+		if (stm32prog_otp_write(data, cursor,
+					data->buffer, &size))
+			result = ABORT_BYTE;
+		goto end;
+	}
+
+	if (operation == PHASE_PMIC) {
+		size = data->cursor - cursor;
+		/* no header for PMIC */
+		if (stm32prog_pmic_write(data, cursor,
+					 data->buffer, &size))
+			result = ABORT_BYTE;
+		goto end;
+	}
+
+	if (cursor < BL_HEADER_SIZE) {
+		/* size = portion of header in this chunck */
+		if (data->cursor >= BL_HEADER_SIZE)
+			size = BL_HEADER_SIZE - cursor;
+		else
+			size = data->cursor - cursor;
+		memcpy((void *)((u32)(data->header_data) + cursor),
+		       data->buffer, size);
+		cursor += size;
+
+		if (cursor == BL_HEADER_SIZE) {
+			/* Check and Write the header */
+			if (stm32prog_header(data)) {
+				result = ABORT_BYTE;
+				goto end;
+			}
+		} else {
+			goto end;
+		}
+	}
+
+	if (image_header->present) {
+		if (data->cursor <= BL_HEADER_SIZE)
+			goto end;
+		/* compute checksum on payload */
+		for (i = (unsigned long)size; i < codesize; i++)
+			data->checksum += data->buffer[i];
+
+		if (data->cursor >
+		    image_header->image_length + BL_HEADER_SIZE) {
+			pr_err("expected size exceeded\n");
+			result = ABORT_BYTE;
+			goto end;
+		}
+
+		/* write data (payload) */
+		ret = stm32prog_write(data,
+				      &data->buffer[size],
+				      codesize - size);
+	} else {
+		/* write all */
+		ret = stm32prog_write(data,
+				      data->buffer,
+				      codesize);
+	}
+	if (ret)
+		result = ABORT_BYTE;
+
+end:
+	stm32prog_serial_result(result);
+}
+
+/**
+ * read_partition() - Respond to read command
+ *
+ * Read data from not volatile memory, Flash
+ *
+ * @data:		Current command context
+ */
+static void read_partition_command(struct stm32prog_data *data)
+{
+	u32 i, part_id, codesize, offset = 0, rcv_data;
+	long size;
+	u8 tmp_xor;
+	int res;
+	u8 buffer[256];
+
+	part_id = stm32prog_serial_getc();
+	tmp_xor = part_id;
+
+	offset = get_address(&tmp_xor);
+
+	rcv_data = stm32prog_serial_getc();
+	if (rcv_data != tmp_xor) {
+		pr_debug("1st checksum received = %x, computed %x\n",
+			 rcv_data, tmp_xor);
+		goto error;
+	}
+	stm32prog_serial_putc(ACK_BYTE);
+
+	/* NbrOfData to read = data + 1 */
+	rcv_data = stm32prog_serial_getc();
+	codesize = rcv_data + 0x01;
+	tmp_xor = rcv_data;
+
+	rcv_data = stm32prog_serial_getc();
+	if ((rcv_data ^ tmp_xor) != 0xFF) {
+		pr_debug("2nd checksum received = %x, computed %x\n",
+			 rcv_data, tmp_xor);
+		goto error;
+	}
+
+	pr_debug("%s : %x\n", __func__, part_id);
+	rcv_data = 0;
+	switch (part_id) {
+	case PHASE_OTP:
+		size = codesize;
+		if (!stm32prog_otp_read(data, offset, buffer, &size))
+			rcv_data = size;
+		break;
+	case PHASE_PMIC:
+		size = codesize;
+		if (!stm32prog_pmic_read(data, offset, buffer, &size))
+			rcv_data = size;
+		break;
+	default:
+		res = stm32prog_read(data, part_id, offset,
+				     buffer, codesize);
+		if (res > 0)
+			rcv_data = res;
+		break;
+	}
+	if (rcv_data > 0) {
+		stm32prog_serial_putc(ACK_BYTE);
+		/*----------- Send data to the host -----------*/
+		for (i = 0; i < rcv_data; i++)
+			stm32prog_serial_putc(buffer[i]);
+		/*----------- Send filler to the host -----------*/
+		for (; i < codesize; i++)
+			stm32prog_serial_putc(0x0);
+		return;
+	}
+	stm32prog_serial_result(ABORT_BYTE);
+	return;
+
+error:
+	stm32prog_serial_result(NACK_BYTE);
+}
+
+/* MAIN function = SERIAL LOOP ***********************************************/
+
+/**
+ * stm32prog_serial_loop() - USART bootloader Loop routine
+ *
+ * @data:		Current command context
+ * @return true if reset is needed after loop
+ */
+bool stm32prog_serial_loop(struct stm32prog_data *data)
+{
+	u32 counter = 0x0;
+	u8 command = 0x0;
+	u8 found;
+	int phase = data->phase;
+
+	/* element of cmd_func need to aligned with cmd_id[]*/
+	void (*cmd_func[NB_CMD])(struct stm32prog_data *) = {
+		/* GET_CMD_COMMAND */	get_cmd_command,
+		/* GET_VER_COMMAND */	get_version_command,
+		/* GET_ID_COMMAND */	get_id_command,
+		/* GET_PHASE_COMMAND */	get_phase_command,
+		/* RM_COMMAND */	read_memory_command,
+		/* READ_PART_COMMAND */	read_partition_command,
+		/* START_COMMAND */	start_command,
+		/* DOWNLOAD_COMMAND */	download_command
+	};
+
+	/* flush and NACK pending command received during u-boot init
+	 * request command reemit
+	 */
+	stm32prog_serial_result(NACK_BYTE);
+
+	clear_ctrlc(); /* forget any previous Control C */
+	while (!had_ctrlc()) {
+		phase = data->phase;
+
+		if (phase == PHASE_DO_RESET)
+			return true;
+
+		/* Get the user command: read first byte */
+		command = stm32prog_serial_getc();
+
+		if (command == INIT_BYTE) {
+			puts("\nConnected\n");
+			stm32prog_serial_result(ACK_BYTE);
+			continue;
+		}
+
+		found = 0;
+		for (counter = 0; counter < NB_CMD; counter++)
+			if (cmd_id[counter] == command) {
+				found = 1;
+				break;
+			}
+		if (found)
+			if ((command ^ stm32prog_serial_getc()) != 0xFF)
+				found = 0;
+		if (!found) {
+			/* wait to be sure that all data are received
+			 * in the FIFO before flush (CMD and XOR)
+			 */
+			mdelay(3);
+			stm32prog_serial_result(NACK_BYTE);
+		} else {
+			stm32prog_serial_result(ACK_BYTE);
+			cmd_func[counter](data);
+		}
+		WATCHDOG_RESET();
+	}
+
+	/* clean device */
+	if (gd->cur_serial_dev == down_serial_dev) {
+		/* restore console on uart */
+		gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT);
+	}
+	down_serial_dev = NULL;
+
+	return false; /* no reset after ctrlc */
+}
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
index 34f27c074f..969245e199 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
@@ -19,6 +19,7 @@ static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase,
 
 	if (phase == data->phase) {
 		data->offset = offset;
+		data->dfu_seq = 0;
 		return 0;
 	}
 
@@ -29,6 +30,7 @@ static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase,
 			data->cur_part = part;
 			data->phase = phase;
 			data->offset = offset;
+			data->dfu_seq = 0;
 			return 0;
 		}
 	}