summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDave Liu <r63238@freescale.com>2007-08-01 15:00:59 +0800
committerKim Phillips <kim.phillips@freescale.com>2007-08-10 01:13:11 -0500
commit47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 (patch)
treee9c927a1b048b18dc99a52e7343290cb03135153
parentdaab8c67d2defef73dc26ab07f0c3afd1b05d019 (diff)
mpc83xx: Correct the README for DDR ECC
Update the README for DDR ECC, change the name to README.mpc83xx.ddrecc. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-rw-r--r--doc/README.mpc83xx.ddrecc (renamed from doc/README.mpc8349emds.ddrecc)60
1 files changed, 30 insertions, 30 deletions
diff --git a/doc/README.mpc8349emds.ddrecc b/doc/README.mpc83xx.ddrecc
index eb249c3956..0029f08759 100644
--- a/doc/README.mpc8349emds.ddrecc
+++ b/doc/README.mpc83xx.ddrecc
@@ -15,10 +15,10 @@ IMPORTANT NOTICE: enabling injecting multiple-bit errors is potentially
dangerous as such errors are NOT corrected by the controller. Therefore caution
should be taken when enabling the injection of multiple-bit errors: it is only
safe when used on a carefully selected memory area and used under control of
-the 'ecc test' command (see example 'Injecting Multiple-Bit Errors' below). In
-particular, when you simply set the multiple-bit errors in inject mask and
-enable injection, U-Boot is very likely to hang quickly as the errors will be
-injected when it accesses its code, data etc.
+the 'ecc testdw' 'ecc testword' command (see example 'Injecting Multiple-Bit
+Errors' below). In particular, when you simply set the multiple-bit errors in
+inject mask and enable injection, U-Boot is very likely to hang quickly as the
+errors will be injected when it accesses its code, data etc.
Use cases for DDR 'ecc' command:
@@ -40,7 +40,7 @@ Injecting Single-Bit Errors
2. Run test over some memory region
-=> ecc test 200000 10
+=> ecc testdw 200000 10
3. Check ECC status
@@ -61,57 +61,57 @@ Memory Error Detect:
16 errors were generated, Single-Bit Error flag was not set as Single Bit Error
Counter did not reach Single-Bit Error Threshold.
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
=> md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe ................
-00200010: cafecafe cafecafe cafecafe cafecafe ................
-00200020: cafecafe cafecafe cafecafe cafecafe ................
-00200030: cafecafe cafecafe cafecafe cafecafe ................
-00200040: cafecafe cafecafe cafecafe cafecafe ................
-00200050: cafecafe cafecafe cafecafe cafecafe ................
-00200060: cafecafe cafecafe cafecafe cafecafe ................
-00200070: cafecafe cafecafe cafecafe cafecafe ................
+00200000: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
00200080: deadbeef deadbeef deadbeef deadbeef ................
00200090: deadbeef deadbeef deadbeef deadbeef ................
-
Injecting Multiple-Bit Errors
-----------------------------
1. Set more than 1 bit in Data Path Error Inject Mask
-=> ecc injectdatahi 5
+=> ecc injectdatahi 1
+=> ecc injectdatalo 1
2. Run test over some memory region
-=> ecc test 200000 10
+=> ecc testword 200000 1
3. Check ECC status
=> ecc status
...
-Memory Data Path Error Injection Mask High/Low: 00000005 00000000
+Memory Data Path Error Injection Mask High/Low: 00000001 00000001
...
Memory Error Detect:
- Multiple Memory Errors: 1
+ Multiple Memory Errors: 0
Multiple-Bit Error: 1
Single-Bit Error: 0
...
-Observe that both Multiple Memory Errors and Multiple-Bit Error flags are set.
+The Multiple Memory Errors flags not set and Multiple-Bit Error flags are set.
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
=> md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe ................
-00200010: cafecafe cafecafe cafecafe cafecafe ................
-00200020: cafecafe cafecafe cafecafe cafecafe ................
-00200030: cafecafe cafecafe cafecafe cafecafe ................
-00200040: cafecafe cafecafe cafecafe cafecafe ................
-00200050: cafecafe cafecafe cafecafe cafecafe ................
-00200060: cafecafe cafecafe cafecafe cafecafe ................
-00200070: cafecafe cafecafe cafecafe cafecafe ................
+00200000: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
00200080: deadbeef deadbeef deadbeef deadbeef ................
00200090: deadbeef deadbeef deadbeef deadbeef ................
@@ -140,7 +140,7 @@ Test Single-Bit Error Counter and Threshold
...
Memory Single-Bit Error Management (0..255):
Single-Bit Error Threshold: 255
- Single Bit Error Counter: 60
+ Single Bit Error Counter: 199
Memory Error Detect:
Multiple Memory Errors: 1