Merge with rsync://git-user@source.denx.net/git/u-boot.git

103 files changed, 10251 insertions, 5172 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 281072e3b2..27c013fe1e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -46,6 +46,29 @@ Changes for U-Boot 1.1.3:
     Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
     new CONFIG_CPM2 option to each 8260 board.
 
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+  - fix alignment of NAND size
+  - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+  The code is provided for, and was tested on, the Yukon/Alaska
+  and PM520 boards only.
+
+  A bug in flash_real_protect() for the Yukon board was fixed by
+  adding a function that tells if two banks are on one flash chip.
+
 * Fix sysmon POST problem: check I2C error codes
   This fixes a problem of displaying bogus voltages when the voltages
   are so low that the I2C devices start failing while the rest of the
diff --git a/MAINTAINERS b/MAINTAINERS
index 088ef982c5..7525dcc816 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -210,6 +210,11 @@ Keith Outwater <Keith_Outwater@mvis.com>
 	GEN860T			MPC860T
 	GEN860T_SC		MPC860T
 
+Stefan Roese <sr@denx.de>
+
+	sycamore		PPC4xx
+	walnut			PPC4xx
+
 Frank Panno <fpanno@delphintech.com>
 
 	ep8260			MPC8260
@@ -327,7 +332,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
diff --git a/MAKEALL b/MAKEALL
index 2a70320bd7..e221de9754 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -60,16 +60,17 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AR405		ASH405		bubinga	        \
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	HUB405		\
 	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	ml300		ocotea		OCRTC		ORSG		\
 	PCI405		PIP405		PLU405		PMC405		\
 	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	walnut	        WUH405          XPEDITE1K	yellowstone     \
+	yosemite                                                        \
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 90a6228399..4e7fa6b26e 100644
--- a/Makefile
+++ b/Makefile
@@ -710,8 +710,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -762,8 +765,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -797,8 +800,8 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
@@ -849,6 +852,10 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
 
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -859,8 +866,8 @@ W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
 
 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -868,6 +875,12 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
diff --git a/README b/README
index b20ede47d3..9283c5eabd 100644
--- a/README
+++ b/README
@@ -295,7 +295,7 @@ The following options need to be configured:
 		CONFIG_FADS823		CONFIG_NETTA		CONFIG_V37
 		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMC
 		CONFIG_FADS860T		CONFIG_NX823		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT405
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT
 		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZPC1900
 		CONFIG_FPS860L		CONFIG_OXC		CONFIG_ZUMA
 
@@ -2192,7 +2192,7 @@ configurations; the following names are supported:
 	FADS850SAR_config	omap1510inn_config	TQM850L_config
 	FADS860T_config		omap1610h2_config	TQM855L_config
 	FPS850L_config		omap1610inn_config	TQM860L_config
-				omap5912osk_config	WALNUT405_config
+				omap5912osk_config	walnut_config
 				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
@@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
index 48c94727e0..383491f566 100644
--- a/board/alaska/flash.c
+++ b/board/alaska/flash.c
@@ -64,7 +64,6 @@ typedef volatile unsigned char FLASH_PORT_WIDTHV;
 #define FLASH_CYCLE2    0x02aa
 
 #define WR_BLOCK        0x20
-
 /*-----------------------------------------------------------------------
  * Functions
  */
@@ -74,6 +73,9 @@ static int write_data_block (flash_info_t * info, ulong src, ulong dest);
 static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
 static void flash_get_offsets (ulong base, flash_info_t * info);
 void inline spin_wheel (void);
+static void flash_sync_real_protect (flash_info_t * info);
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
+static unsigned char same_chip_banks (int bank1, int bank2);
 
 /*-----------------------------------------------------------------------
  */
@@ -115,6 +117,9 @@ unsigned long flash_init (void)
 			break;
 		}
 		size += flash_info[i].size;
+
+		/* get the h/w and s/w protection status in sync */
+		flash_sync_real_protect(&flash_info[i]);
 	}
 
 	/* Protect monitor and environment sectors
@@ -167,7 +172,6 @@ static void flash_get_offsets (ulong base, flash_info_t * info)
 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 		for (i = 0; i < info->sector_count; i++) {
 			info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE);
-			info->protect[i] = 0;
 		}
 	}
 }
@@ -305,6 +309,98 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 }
 
 
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+static void flash_sync_real_protect (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F128J3A:
+		for (i = 0; i < info->sector_count; ++i) {
+			info->protect[i] = intel_sector_protected(info, i);
+		}
+		break;
+	case FLASH_AM040:
+	default:
+		/* no h/w protect support */
+		break;
+	}
+}
+
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
+{
+	FPWV *addr;
+	FPWV *lock_conf_addr;
+	ulong start;
+	unsigned char ret;
+
+	/*
+	 * first, wait for the WSM to be finished. The rationale for
+	 * waiting for the WSM to become idle for at most
+	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * because of: (1) erase, (2) program or (3) lock bit
+	 * configuration. So we just wait for the longest timeout of
+	 * the (1)-(3), i.e. the erase timeout.
+	 */
+
+	/* wait at least 35ns (W12) before issuing Read Status Register */
+	udelay(1);
+	addr = (FPWV *) info->start[sector];
+	*addr = (FPW) INTEL_STATUS;
+
+	start = get_timer (0);
+	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+		if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+			*addr = (FPW) INTEL_RESET; /* restore read mode */
+			printf("WSM busy too long, can't get prot status\n");
+			return 1;
+		}
+	}
+
+	/* issue the Read Identifier Codes command */
+	*addr = (FPW) INTEL_READID;
+
+	/* wait at least 35ns (W12) before reading */
+	udelay(1);
+
+	/* Intel example code uses offset of 4 for 8-bit flash */
+	lock_conf_addr = (FPWV *) info->start[sector] + 4;
+	ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+	/* put flash back in read mode */
+	*addr = (FPW) INTEL_RESET;
+
+	return ret;
+}
+
+
+/*
+ * Checks if "bank1" and "bank2" are on the same chip.  Returns 1 if they
+ * are and 0 otherwise.
+ */
+static unsigned char same_chip_banks (int bank1, int bank2)
+{
+	unsigned char same_chip[CFG_MAX_FLASH_BANKS][CFG_MAX_FLASH_BANKS] = {
+		{1, 1, 0, 0},
+		{1, 1, 0, 0},
+		{0, 0, 1, 1},
+		{0, 0, 1, 1}
+	};
+	return same_chip[bank1][bank2];
+}
+
+
 /*-----------------------------------------------------------------------
  */
 int flash_erase (flash_info_t * info, int s_first, int s_last)
@@ -729,7 +825,9 @@ void inline spin_wheel (void)
 int flash_real_protect (flash_info_t * info, long sector, int prot)
 {
 	ulong start;
-	int i;
+	int i, j;
+	int curr_bank;
+	int bank;
 	int rc = 0;
 	FPWV *addr = (FPWV *) (info->start[sector]);
 	int flag = disable_interrupts ();
@@ -779,23 +877,54 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 	 * we have to restore lock bits of protected sectors.
 	 */
 	if (!prot) {
-		for (i = 0; i < info->sector_count; i++) {
-			if (info->protect[i]) {
-				start = get_timer (0);
-				addr = (FPWV *) (info->start[i]);
-				*addr = INTEL_LOCKBIT;	/* Sector lock bit  */
-				*addr = INTEL_PROTECT;	/* set              */
-				while ((*addr & INTEL_FINISHED) !=
-				       INTEL_FINISHED) {
-					if (get_timer (start) >
-					    CFG_FLASH_UNLOCK_TOUT) {
-						printf ("Flash lock bit operation timed out\n");
-						rc = 1;
-						break;
+		/*
+		 * re-locking must be done for all banks that belong on one
+		 * FLASH chip, as all the sectors on the chip were unlocked
+		 * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope
+		 * that banks never span chips, in particular chips which
+		 * support h/w protection differently).
+		 */
+
+		/* find the current bank number */
+		curr_bank = CFG_MAX_FLASH_BANKS + 1;
+		for (j = 0; j < CFG_MAX_FLASH_BANKS; ++j) {
+			if (&flash_info[j] == info) {
+				curr_bank = j;
+			}
+		}
+		if (curr_bank == CFG_MAX_FLASH_BANKS + 1) {
+			printf("Error: can't determine bank number!\n");
+		}
+
+		for (bank = 0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
+			if (!same_chip_banks(curr_bank, bank)) {
+				continue;
+			}
+			info = &flash_info[bank];
+			for (i = 0; i < info->sector_count; i++) {
+				if (info->protect[i]) {
+					start = get_timer (0);
+					addr = (FPWV *) (info->start[i]);
+					*addr = INTEL_LOCKBIT;	/* Sector lock bit  */
+					*addr = INTEL_PROTECT;	/* set              */
+					while ((*addr & INTEL_FINISHED) !=
+					       INTEL_FINISHED) {
+						if (get_timer (start) >
+						    CFG_FLASH_UNLOCK_TOUT) {
+							printf ("Flash lock bit operation timed out\n");
+							rc = 1;
+							break;
+						}
 					}
 				}
 			}
 		}
+
+		/*
+		 * get the s/w sector protection status in sync with the h/w,
+		 * in case something went wrong during the re-locking.
+		 */
+		flash_sync_real_protect(info); /* resets flash to read  mode */
 	}
 
 	if (flag)
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
new file mode 100644
index 0000000000..0b9790607b
--- /dev/null
+++ b/board/amcc/bamboo/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+#OBJS   += flash.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
new file mode 100644
index 0000000000..7b2d3f4c38
--- /dev/null
+++ b/board/amcc/bamboo/bamboo.c
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+
+#if 0 /* test-only */
+	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfe0ba000);	/* BAS=0xfe0 32MB r/w 16-bit */
+
+	mtebc(pb1ap, 0x00000000);
+	mtebc(pb1cr, 0x00000000);
+
+	mtebc(pb2ap, 0x04814500);
+	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
+#else
+	mtebc(pb0ap, 0x04055200);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfff18000);	/* BAS=0xfe0 1MB r/w 8-bit */
+#endif
+
+	mtebc(pb3ap, 0x00000000);
+	mtebc(pb3cr, 0x00000000);
+
+	mtebc(pb4ap, 0x00000000);
+	mtebc(pb4cr, 0x00000000);
+
+	mtebc(pb5ap, 0x00000000);
+	mtebc(pb5cr, 0x00000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 *-------------------------------------------------------------------*/
+	/*CPLD cs */
+	/*setup Address lines for flash sizes larger than 16Meg. */
+	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+	/*setup emac */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+	/*UART1 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+	/*setup USB 2.0 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+	/*--------------------------------------------------------------------
+	 * Setup other serial configuration
+	 *-------------------------------------------------------------------*/
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
+	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+
+#if 0 /* test-only */
+	/*clear tmrclk divisor */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+	/*enable ethernet */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+	/*enable usb 1.1 fs device and remove usb 2.0 reset */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+	/*get rid of flash write protect */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	sys_info_t sysinfo;
+	unsigned char *s = getenv("serial#");
+
+	get_sys_info(&sysinfo);
+
+	printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	return (0);
+}
+
+/*************************************************************************
+ *  sdram_init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    256 MB, ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_clktr, 0x40000000);	/* ?? */
+	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
+
+	/*clear this first, if the DDR is enabled by a debugger
+	   then you can not make changes. */
+	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
+
+	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
+	mtsdram(mem_tr1, 0x8080080b);	/* ?? */
+	mtsdram(mem_rtr, 0x04080000);	/* ?? */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	udelay(400);		/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+
+	for (;;) {
+		mfsdram(mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+}
+
+/*************************************************************************
+ *  long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+	sdram_init();
+	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	for (k = 0; k < CFG_KBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long strap;
+	unsigned long addr;
+
+	/*--------------------------------------------------------------------------+
+	 *	Bamboo is always configured as the host & requires the
+	 *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+		printf("PCI: SDR0_STRP1[PAE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return 0;
+	}
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440 EP PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Bamboo is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  hw_watchdog_reset
+ *
+ *	This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
new file mode 100644
index 0000000000..4ab0ea0084
--- /dev/null
+++ b/board/amcc/bamboo/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
new file mode 100644
index 0000000000..7ba43c7b06
--- /dev/null
+++ b/board/amcc/bamboo/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_8M       0x00000060
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+	/*
+		0xf0000000 must be first, before relocation SA_I must be off to use the
+	    dcache as stack. It is patched after relocation to enable SA_I
+	*/
+    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+    /* PCI */
+    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+    /* USB 2.0 Device */
+    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+    tlbtab_end
diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds
new file mode 100644
index 0000000000..a4016d540b
--- /dev/null
+++ b/board/amcc/bamboo/u-boot.lds
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/amcc/bamboo/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/bubinga405ep/Makefile b/board/amcc/bubinga/Makefile
index 97d6a1e671..f5bda5519a 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
new file mode 100644
index 0000000000..b4e9349ad7
--- /dev/null
+++ b/board/amcc/bubinga/bubinga.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+long int spd_sdram(void);
+
+#include <common.h>
+#include <asm/processor.h>
+
+int board_early_init_f(void)
+{
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000010);
+	mtdcr(uicpr, 0xFFFF7FF0);	/* set int polarities */
+	mtdcr(uictr, 0x00000010);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	unsigned char *s = getenv("serial#");
+
+	puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+	return;
+}
+
+/* -------------------------------------------------------------------------
+  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+  the necessary info for SDRAM controller configuration
+   ------------------------------------------------------------------------- */
+long int initdram(int board_type)
+{
+	long int ret;
+
+	ret = spd_sdram();
+	return ret;
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("test: xxx MB - ok\n");
+
+	return (0);
+}
diff --git a/board/walnut405/config.mk b/board/amcc/bubinga/config.mk
index 8426bb38fe..1bdf5e4fcf 100644
--- a/board/walnut405/config.mk
+++ b/board/amcc/bubinga/config.mk
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
new file mode 100644
index 0000000000..e4832ebf36
--- /dev/null
+++ b/board/amcc/bubinga/flash.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+	uint pbcr;
+	unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 =
+	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+		       size_b0, size_b0 << 20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1) {
+		/* Setup offsets */
+		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+#endif
+
+		size_b1 = 0;
+		flash_info[0].size = size_b0;
+	}
+
+	/* 2 banks */
+	else {
+		size_b1 =
+		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+				   &flash_info[1]);
+
+		/* Re-do sizing to get full correct info */
+
+		if (size_b1) {
+			mtdcr(ebccfga, pb0cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb0cr);
+			base_b1 = -size_b1;
+			pbcr = (pbcr & 0x0001ffff) | base_b1 |
+			    (((size_b1 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*          printf("pb1cr = %x\n", pbcr); */
+		}
+
+		if (size_b0) {
+			mtdcr(ebccfga, pb1cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb1cr);
+			base_b0 = base_b1 - size_b0;
+			pbcr = (pbcr & 0x0001ffff) | base_b0 |
+			    (((size_b0 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*            printf("pb0cr = %x\n", pbcr); */
+		}
+
+		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+		flash_get_offsets(base_b0, &flash_info[0]);
+
+		/* monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    base_b0 + size_b0 - CFG_MONITOR_LEN,
+				    base_b0 + size_b0 - 1, &flash_info[0]);
+		/* Also protect sector containing initial power-up instruction */
+		/* (flash_protect() checks address range - other call ignored) */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
+
+		if (size_b1) {
+			/* Re-do sizing to get full correct info */
+			size_b1 =
+			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+			flash_get_offsets(base_b1, &flash_info[1]);
+
+			/* monitor protection ON by default */
+			(void)flash_protect(FLAG_PROTECT_SET,
+					    base_b1 + size_b1 - CFG_MONITOR_LEN,
+					    base_b1 + size_b1 - 1,
+					    &flash_info[1]);
+			/* monitor protection OFF by default (one is enough) */
+			(void)flash_protect(FLAG_PROTECT_CLEAR,
+					    base_b0 + size_b0 - CFG_MONITOR_LEN,
+					    base_b0 + size_b0 - 1,
+					    &flash_info[0]);
+		} else {
+			flash_info[1].flash_id = FLASH_UNKNOWN;
+			flash_info[1].sector_count = -1;
+		}
+
+		flash_info[0].size = size_b0;
+		flash_info[1].size = size_b1;
+	}			/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
diff --git a/board/bubinga405ep/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index 3894614a4a..b8f08eaf7e 100644
--- a/board/bubinga405ep/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/bubinga405ep/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
new file mode 100644
index 0000000000..7311c4edd5
--- /dev/null
+++ b/board/amcc/common/flash.c
@@ -0,0 +1,555 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf("AMD ");
+		break;
+	case FLASH_MAN_STM:
+		printf("STM ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:
+		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_AM160B:
+		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM033C:
+		printf("AM29LV033C (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:
+		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:
+		printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		break;
+	}
+
+	printf("  Size: %ld KB in %d Sectors\n",
+	       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s%s",
+		       info->start[i],
+		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
+	}
+	printf("\n");
+	return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+	short i;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+	value = addr2[1];	/* device ID            */
+
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+		info->flash_id += FLASH_AMD016;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+		info->flash_id += FLASH_AMDLV033C;
+		info->sector_count = 64;
+		info->size = 0x00400000;
+		break;		/* => 4 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
diff --git a/board/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927be7e..4a3927be7e 100644
--- a/board/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
diff --git a/board/ebony/config.mk b/board/amcc/ebony/config.mk
index 84e3e52509..e5722dd36a 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -30,7 +30,7 @@
 ifeq ($(ramsym),1)
 TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/ebony/ebony.c b/board/amcc/ebony/ebony.c
index a5b3fb6538..f6bb83713f 100644
--- a/board/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -20,9 +20,7 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
-#include "ebony.h"
 #include <asm/processor.h>
 #include <spd_sdram.h>
 
@@ -30,99 +28,102 @@
 #define FLASH_ONBD_N		2	/* 00000010 */
 #define FLASH_SRAM_SEL		1	/* 00000001 */
 
-long int fixed_sdram (void);
+long int fixed_sdram(void);
 
-int board_early_init_f (void)
+int board_early_init_f(void)
 {
 	uint reg;
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
 	unsigned char status;
 
-
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr (ebccfga, xbcfg);
-	reg = mfdcr (ebccfgd);
-	mtdcr (ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
 
-	mtebc (pb1ap, 0x02815480);	/* NVRAM/RTC */
-	mtebc (pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
-	mtebc (pb7ap, 0x01015280);	/* FPGA registers */
-	mtebc (pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
+	mtebc(pb1ap, 0x02815480);	/* NVRAM/RTC */
+	mtebc(pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
+	mtebc(pb7ap, 0x01015280);	/* FPGA registers */
+	mtebc(pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
 
 	/* read FPGA_REG0  and set the bus controller */
 	status = *fpga_base;
 	if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
-		mtebc (pb0ap, 0x9b015480);	/* FLASH/SRAM */
-		mtebc (pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
-		mtebc (pb2ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc (pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
+		mtebc(pb0ap, 0x9b015480);	/* FLASH/SRAM */
+		mtebc(pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
+		mtebc(pb2ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
 	} else {
-		mtebc (pb0ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc (pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
+		mtebc(pb0ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
 
 		/* set CS2 if FLASH_ONBD_N == 0 */
 		if (!(status & FLASH_ONBD_N)) {
-			mtebc (pb2ap, 0x9b015480);	/* FLASH/SRAM */
-			mtebc (pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
+			mtebc(pb2ap, 0x9b015480);	/* FLASH/SRAM */
+			mtebc(pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
 		}
 	}
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
-	mtdcr (uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr (uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr (uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
 
 	return 0;
 }
 
-
-int checkboard (void)
+int checkboard(void)
 {
 	sys_info_t sysinfo;
+	unsigned char *s = getenv("serial#");
 
-	get_sys_info (&sysinfo);
+	get_sys_info(&sysinfo);
 
-	printf ("Board: IBM 440GP Evaluation Board (Ebony)\n");
-	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
-	printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
-	printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
 	return (0);
 }
 
-
-long int initdram (int board_type)
+long int initdram(int board_type)
 {
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram(0);
 #else
-	dram_size = fixed_sdram ();
+	dram_size = fixed_sdram();
 #endif
 	return dram_size;
 }
 
-
 #if defined(CFG_DRAM_TEST)
-int testdram (void)
+int testdram(void)
 {
 	uint *pstart = (uint *) 0x00000000;
 	uint *pend = (uint *) 0x08000000;
@@ -133,7 +134,7 @@ int testdram (void)
 
 	for (p = pstart; p < pend; p++) {
 		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			printf("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}
@@ -143,7 +144,7 @@ int testdram (void)
 
 	for (p = pstart; p < pend; p++) {
 		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			printf("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}
@@ -159,18 +160,18 @@ int testdram (void)
  *              PLB @ 133 MHz
  *
  ************************************************************************/
-long int fixed_sdram (void)
+long int fixed_sdram(void)
 {
 	uint reg;
 
 	/*--------------------------------------------------------------------
 	 * Setup some default
 	 *------------------------------------------------------------------*/
-	mtsdram (mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram (mem_slio, 0x00000000);		/* rdre=0 wrre=0 rarw=0         */
-	mtsdram (mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram (mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
-	mtsdram (mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
+	mtsdram(mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
 
 	/*--------------------------------------------------------------------
 	 * Setup for board-specific specific mem
@@ -178,28 +179,27 @@ long int fixed_sdram (void)
 	/*
 	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
 	 */
-	mtsdram (mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram (mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
 	/* RA=10 RD=3                       */
-	mtsdram (mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram (mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram (mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	udelay (400);			/* Delay 200 usecs (min)            */
+	mtsdram(mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
+	mtsdram(mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	udelay(400);		/* Delay 200 usecs (min)            */
 
 	/*--------------------------------------------------------------------
 	 * Enable the controller, then wait for DCEN to complete
 	 *------------------------------------------------------------------*/
-	mtsdram (mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
+	mtsdram(mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
 	for (;;) {
-		mfsdram (mem_mcsts, reg);
+		mfsdram(mem_mcsts, reg);
 		if (reg & 0x80000000)
 			break;
 	}
 
 	return (128 * 1024 * 1024);	/* 128 MB                           */
 }
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
+#endif				/* !defined(CONFIG_SPD_EEPROM) */
 
 /*************************************************************************
  *  pci_pre_init
@@ -214,23 +214,23 @@ long int fixed_sdram (void)
  *
  ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller * hose )
+int pci_pre_init(struct pci_controller *hose)
 {
-    unsigned long strap;
+	unsigned long strap;
 
 	/*--------------------------------------------------------------------------+
      *	The ebony board is always configured as the host & requires the
      *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-    strap = mfdcr(cpc0_strp1);
-    if( (strap & 0x00100000) == 0 ){
-	printf("PCI: CPC0_STRP1[PAE] not set.\n");
-	return 0;
-    }
+	strap = mfdcr(cpc0_strp1);
+	if ((strap & 0x00100000) == 0) {
+		printf("PCI: CPC0_STRP1[PAE] not set.\n");
+		return 0;
+	}
 
-    return 1;
+	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
 
 /*************************************************************************
  *  pci_target_init
@@ -241,38 +241,37 @@ int pci_pre_init(struct pci_controller * hose )
  *
  ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
+void pci_target_init(struct pci_controller *hose)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r(PCIX0_PIM0SA, 0);	/* disable */
+	out32r(PCIX0_PIM1SA, 0);	/* disable */
+	out32r(PCIX0_PIM2SA, 0);	/* disable */
+	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
      * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r(PCIX0_BAR0, 0);
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-    out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-    out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -292,7 +291,7 @@ void pci_target_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
-    /* The ebony board is always configured as host. */
-    return(1);
+	/* The ebony board is always configured as host. */
+	return (1);
 }
-#endif /* defined(CONFIG_PCI) */
+#endif				/* defined(CONFIG_PCI) */
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
new file mode 100644
index 0000000000..e8fbbc493e
--- /dev/null
+++ b/board/amcc/ebony/flash.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+#define     BOOT_SMALL_FLASH        32	/* 00100000 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+
+#define     BOOT_SMALL_FLASH_VAL    4
+#define     FLASH_ONBD_N_VAL        2
+#define     FLASH_SRAM_SEL_VAL      1
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+	{0xffc00000, 0xffe00000, 0xff880000},	/* 0:000: configuraton 3 */
+	{0xffc00000, 0xffe00000, 0xff800000},	/* 1:001: configuraton 4 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 2:010: configuraton 7 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 3:011: configuraton 8 */
+	{0xff800000, 0xffa00000, 0xfff80000},	/* 4:100: configuraton 1 */
+	{0xff800000, 0xffa00000, 0xfff00000},	/* 5:101: configuraton 2 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 6:110: configuraton 5 */
+	{0xffc00000, 0xffe00000, 0x00000000}	/* 7:111: configuraton 6 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char switch_status;
+	unsigned short index = 0;
+	int i;
+
+	/* read FPGA base register FPGA_REG0 */
+	switch_status = *fpga_base;
+
+	/* check the bitmap of switch status */
+	if (switch_status & BOOT_SMALL_FLASH) {
+		index += BOOT_SMALL_FLASH_VAL;
+	}
+	if (switch_status & FLASH_ONBD_N) {
+		index += FLASH_ONBD_N_VAL;
+	}
+	if (switch_status & FLASH_SRAM_SEL) {
+		index += FLASH_SRAM_SEL_VAL;
+	}
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *)
+					   flash_addr_table[index][i],
+					   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			       i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[2]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[2]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[2]);
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/ebony/init.S b/board/amcc/ebony/init.S
index cc8f8b444e..cc8f8b444e 100644
--- a/board/ebony/init.S
+++ b/board/amcc/ebony/init.S
diff --git a/board/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 7ea7caf5fd..0ec3fad8c3 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/ebony/init.o	(.text)
+    board/amcc/ebony/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2c55..af223d2c55 100644
--- a/board/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
diff --git a/board/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 5543a4eabd..5543a4eabd 100644
--- a/board/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
new file mode 100644
index 0000000000..5614e20780
--- /dev/null
+++ b/board/amcc/ocotea/flash.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+#define     BOOT_SMALL_FLASH        0x40	/* 01000000 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+
+#define     BOOT_SMALL_FLASH_VAL    4
+#define     FLASH_ONBD_N_VAL        2
+#define     FLASH_SRAM_SEL_VAL      1
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
+	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 3:011: configuraton 7 */
+	{0xFFE00000, 0xFFF00000, 0xFF800000},	/* 4:100: configuraton 2 */
+	{0xFFF00000, 0xFFF80000, 0xFF800000},	/* 5:101: configuraton 1 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 6:110: configuraton 6 */
+	{0x00000000, 0x00000000, 0x00000000}	/* 7:111: configuraton 5 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char switch_status;
+	unsigned short index = 0;
+	int i;
+
+	/* read FPGA base register FPGA_REG0 */
+	switch_status = *fpga_base;
+
+	/* check the bitmap of switch status */
+	if (switch_status & BOOT_SMALL_FLASH) {
+		index += BOOT_SMALL_FLASH_VAL;
+	}
+	if (switch_status & FLASH_ONBD_N) {
+		index += FLASH_ONBD_N_VAL;
+	}
+	if (switch_status & FLASH_SRAM_SEL) {
+		index += FLASH_SRAM_SEL_VAL;
+	}
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] =
+		    flash_get_size((vu_long *) flash_addr_table[index][i],
+				   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf
+			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			     i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[i]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/ocotea/init.S b/board/amcc/ocotea/init.S
index e33427a108..e33427a108 100644
--- a/board/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
diff --git a/board/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 1c532a361e..5f436eaeee 100644
--- a/board/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -1,6 +1,9 @@
 /*
  *  Copyright (C) 2004 PaulReynolds@lhsolutions.com
  *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -184,10 +187,17 @@ int board_early_init_f (void)
 int checkboard (void)
 {
 	sys_info_t sysinfo;
+	unsigned char *s = getenv ("serial#");
 
 	get_sys_info (&sysinfo);
 
-	printf ("Board: IBM 440GX Evaluation Board\n");
+	printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
+	if (s != NULL) {
+		puts (", serial# ");
+		puts (s);
+	}
+	putc ('\n');
+
 	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
 	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
 	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
diff --git a/board/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 41bd4500d6..41bd4500d6 100644
--- a/board/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
diff --git a/board/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 8a54617142..a9852461e1 100644
--- a/board/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/ocotea/init.o	(.text)
+    board/amcc/ocotea/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/walnut405/Makefile b/board/amcc/walnut/Makefile
index 97d6a1e671..f5bda5519a 100644
--- a/board/walnut405/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/bubinga405ep/config.mk b/board/amcc/walnut/config.mk
index 8426bb38fe..1bdf5e4fcf 100644
--- a/board/bubinga405ep/config.mk
+++ b/board/amcc/walnut/config.mk
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
new file mode 100644
index 0000000000..056f9b9362
--- /dev/null
+++ b/board/amcc/walnut/flash.c
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+	uint pbcr;
+	unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 =
+	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+		       size_b0, size_b0 << 20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1) {
+		/* Setup offsets */
+		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+#endif
+
+		size_b1 = 0;
+		flash_info[0].size = size_b0;
+	} else {
+		/* 2 banks */
+		size_b1 =
+		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+				   &flash_info[1]);
+
+		/* Re-do sizing to get full correct info */
+
+		if (size_b1) {
+			mtdcr(ebccfga, pb0cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb0cr);
+			base_b1 = -size_b1;
+			pbcr =
+			    (pbcr & 0x0001ffff) | base_b1 |
+			    (((size_b1 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*          printf("pb1cr = %x\n", pbcr); */
+		}
+
+		if (size_b0) {
+			mtdcr(ebccfga, pb1cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb1cr);
+			base_b0 = base_b1 - size_b0;
+			pbcr =
+			    (pbcr & 0x0001ffff) | base_b0 |
+			    (((size_b0 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*            printf("pb0cr = %x\n", pbcr); */
+		}
+
+		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+		flash_get_offsets(base_b0, &flash_info[0]);
+
+		/* monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    base_b0 + size_b0 - monitor_flash_len,
+				    base_b0 + size_b0 - 1, &flash_info[0]);
+
+		if (size_b1) {
+			/* Re-do sizing to get full correct info */
+			size_b1 =
+			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+			flash_get_offsets(base_b1, &flash_info[1]);
+
+			/* monitor protection ON by default */
+			(void)flash_protect(FLAG_PROTECT_SET,
+					    base_b1 + size_b1 -
+					    monitor_flash_len,
+					    base_b1 + size_b1 - 1,
+					    &flash_info[1]);
+			/* monitor protection OFF by default (one is enough) */
+			(void)flash_protect(FLAG_PROTECT_CLEAR,
+					    base_b0 + size_b0 -
+					    monitor_flash_len,
+					    base_b0 + size_b0 - 1,
+					    &flash_info[0]);
+		} else {
+			flash_info[1].flash_id = FLASH_UNKNOWN;
+			flash_info[1].sector_count = -1;
+		}
+
+		flash_info[0].size = size_b0;
+		flash_info[1].size = size_b1;
+	}			/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
diff --git a/board/walnut405/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 7a75f6a28a..7107880887 100644
--- a/board/walnut405/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/walnut405/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
new file mode 100644
index 0000000000..9fca0a60d0
--- /dev/null
+++ b/board/amcc/walnut/walnut.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	/*-------------------------------------------------------------------------+
+	  | Interrupt controller setup for the Walnut/Sycamore board.
+	  | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+	  |       IRQ 16    405GP internally generated; active low; level sensitive
+	  |       IRQ 17-24 RESERVED
+	  |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+	  |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+	  |       IRQ 27 (EXT IRQ 2) Not Used
+	  |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+	  |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	  |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+	  |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+	  | Note for Walnut board:
+	  |       An interrupt taken for the FPGA (IRQ 25) indicates that either
+	  |       the Mouse, Keyboard, IRDA, or External Expansion caused the
+	  |       interrupt. The FPGA must be read to determine which device
+	  |       caused the interrupt. The default setting of the FPGA clears
+	  |
+	  +-------------------------------------------------------------------------*/
+
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000020);	/* set all but FPGA SMI to be non-critical */
+	mtdcr(uicpr, 0xFFFFFFE0);	/* set int polarities */
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC       0xF0300004
+	*(volatile char *)(FPGA_BRDC) |= 0x1;
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	unsigned char *s = getenv("serial#");
+	uint pvr = get_pvr();
+
+	if (pvr == PVR_405GPR_RB) {
+		puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+	} else {
+		puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
+	}
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+	return;
+}
+
+/*
+ * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ * the necessary info for SDRAM controller configuration
+ */
+long int initdram(int board_type)
+{
+	return spd_sdram(0);
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("test: xxx MB - ok\n");
+
+	return (0);
+}
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile
new file mode 100644
index 0000000000..5654f91a83
--- /dev/null
+++ b/board/amcc/yellowstone/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+OBJS   += flash.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/yellowstone/config.mk b/board/amcc/yellowstone/config.mk
new file mode 100644
index 0000000000..4ab0ea0084
--- /dev/null
+++ b/board/amcc/yellowstone/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/ocotea/flash.c b/board/amcc/yellowstone/flash.c
index bc0d2c9c16..99fcfb5c7e 100644
--- a/board/ocotea/flash.c
+++ b/board/amcc/yellowstone/flash.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2004-2005
+ * (C) Copyright 2002-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
@@ -15,7 +15,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -31,40 +31,35 @@
  * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
  */
 
+/*
+ * Ported to XPedite1000, 1/2 mb boot flash only
+ * Travis B. Sawyer, <travis.sawyer@sandburst.com>
+ */
+
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
 #undef DEBUG
-
 #ifdef DEBUG
 #define DEBUGF(x...) printf(x)
 #else
 #define DEBUGF(x...)
 #endif				/* DEBUG */
 
-#define     BOOT_SMALL_FLASH        0x40 /* 01000000 */
-#define     FLASH_ONBD_N            2	/* 00000010 */
-#define     FLASH_SRAM_SEL          1	/* 00000001 */
-#define     FLASH_ONBD_N            2	/* 00000010 */
-#define     FLASH_SRAM_SEL          1	/* 00000001 */
+#define BOOT_SMALL_FLASH	32	/* 00100000 */
+#define FLASH_ONBD_N		2	/* 00000010 */
+#define FLASH_SRAM_SEL		1	/* 00000001 */
 
-#define     BOOT_SMALL_FLASH_VAL    4
-#define     FLASH_ONBD_N_VAL        2
-#define     FLASH_SRAM_SEL_VAL      1
+#define BOOT_SMALL_FLASH_VAL	4
+#define FLASH_ONBD_N_VAL	2
+#define FLASH_SRAM_SEL_VAL	1
 
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips   */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
+	{0xfe000000}
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
-	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
-	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 3:011: configuraton 7 */
-	{0xFFE00000, 0xFFF00000, 0xFF800000},	/* 4:100: configuraton 2 */
-	{0xFFF00000, 0xFFF80000, 0xFF800000},	/* 5:101: configuraton 1 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 6:110: configuraton 6 */
-	{0x00000000, 0x00000000, 0x00000000}	/* 7:111: configuraton 5 */
 };
 
 /*-----------------------------------------------------------------------
@@ -73,12 +68,9 @@ static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 static int write_word(flash_info_t * info, ulong dest, ulong data);
 
-
-#ifdef CONFIG_OCOTEA
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
+#define ADDR0		0xaaaa
+#define ADDR1		0x5554
+#define FLASH_WORD_SIZE unsigned short
 
 /*-----------------------------------------------------------------------
  */
@@ -87,25 +79,9 @@ unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
 	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
-	unsigned char switch_status;
 	unsigned short index = 0;
 	int i;
 
-	/* read FPGA base register FPGA_REG0 */
-	switch_status = *fpga_base;
-
-	/* check the bitmap of switch status */
-	if (switch_status & BOOT_SMALL_FLASH) {
-		index += BOOT_SMALL_FLASH_VAL;
-	}
-	if (switch_status & FLASH_ONBD_N) {
-		index += FLASH_ONBD_N_VAL;
-	}
-	if (switch_status & FLASH_SRAM_SEL) {
-		index += FLASH_SRAM_SEL_VAL;
-	}
-
 	DEBUGF("\n");
 	DEBUGF("FLASH: Index: %d\n", index);
 
@@ -121,11 +97,14 @@ unsigned long flash_init(void)
 		}
 
 		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
+		size_b[i] = flash_get_size((vu_long *)
+					   flash_addr_table[index][i],
+					   &flash_info[i]);
 		flash_info[i].size = size_b[i];
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i, size_b[i], size_b[i] << 20);
+			printf
+			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			     i, size_b[i], size_b[i] << 20);
 			flash_info[i].sector_count = -1;
 			flash_info[i].size = 0;
 		}
@@ -133,11 +112,9 @@ unsigned long flash_init(void)
 		total_b += flash_info[i].size;
 	}
 
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[2]);
+	/* FLASH protect Monitor */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
 
 	return total_b;
 }
@@ -161,9 +138,6 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_MAN_AMD:
 		printf("AMD ");
 		break;
-	case FLASH_MAN_STM:
-		printf("STM ");
-		break;
 	case FLASH_MAN_FUJ:
 		printf("FUJITSU ");
 		break;
@@ -176,6 +150,9 @@ void flash_print_info(flash_info_t * info)
 	}
 
 	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
 	case FLASH_AM040:
 		printf("AM29F040 (512 Kbit, uniform sector size)\n");
 		break;
@@ -203,9 +180,6 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_AM320T:
 		printf("AM29LV320T (32 Mbit, top boot sector)\n");
 		break;
-	case FLASH_AMDLV033C:
-		printf("AM29LV033C (32 Mbit, top boot sector)\n");
-		break;
 	case FLASH_SST800A:
 		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
 		break;
@@ -230,7 +204,7 @@ void flash_print_info(flash_info_t * info)
 		else
 			size = info->start[0] + info->size - info->start[i];
 		erased = 1;
-		flash = (volatile unsigned long *) info->start[i];
+		flash = (volatile unsigned long *)info->start[i];
 		size = size >> 2;	/* divide by 4 for longword access */
 		for (k = 0; k < size; k++) {
 			if (*flash++ != 0xffffffff) {
@@ -252,6 +226,9 @@ void flash_print_info(flash_info_t * info)
 /*-----------------------------------------------------------------------
  */
 
+/*-----------------------------------------------------------------------
+ */
+
 /*
  * The following code cannot be run from FLASH!
  */
@@ -262,18 +239,19 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	ulong base = (ulong) addr;
 	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
 
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned) addr);
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
 	udelay(10000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
 	udelay(1000);
-	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
 	udelay(1000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
 	udelay(1000);
 
 	value = addr2[0];
+
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
@@ -293,96 +271,29 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		return (0);		/* no or unknown flash  */
+		return (0);	/* no or unknown flash  */
 	}
 
-	value = addr2[1];		/* device ID            */
+#ifdef CONFIG_ADCIOP
+	value = addr2[0];	/* device ID            */
+	debug("\ndev_code=%x\n", value);
+#else
+	value = addr2[1];	/* device ID            */
+#endif
 
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;	/* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE) AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;	/* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE) STM_ID_M29W040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;	/* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE) AMD_ID_LV033C:
-		info->flash_id += FLASH_AMDLV033C;
-		info->sector_count = 64;
-		info->size = 0x00400000;
-		break;			/* => 4 MB              */
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);		/* => no or unknown flash */
-	}
+	info->flash_id = 0;
+	info->sector_count = CFG_MAX_FLASH_SECT;
+	info->size = 0x02000000;
 
 	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
-	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
 	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of	*
-		 * reading flash protection for upper 8 Mb of flash	*/
-		if ( i == 32 ) {
-			addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
-			addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
-		}
-
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
+		info->start[i] = (int)base + (i * 0x00020000);
+		info->protect[i] = 0;
 	}
 
-	/* issue bank reset to return to read mode */
-	addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		/* ? ? ? */
-	}
+	*(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0;	/* reset bank */
 
 	return (info->size);
 }
@@ -391,7 +302,7 @@ int wait_for_DQ7(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
 	volatile FLASH_WORD_SIZE *addr =
-		(FLASH_WORD_SIZE *) (info->start[sect]);
+	    (FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
@@ -457,24 +368,31 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
 			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+			printf("Erasing sector %p\n", addr2);
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x00AA;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+			    (FLASH_WORD_SIZE) 0x0055;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x0080;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x00AA;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+			    (FLASH_WORD_SIZE) 0x0055;
+			asm("sync");
+			asm("isync");
+			addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			asm("sync");
+			asm("isync");
 
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay(1000);	/* wait 1 ms */
-			} else {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
 			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
@@ -494,6 +412,16 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* wait at least 80us - let's wait 1 ms */
 	udelay(1000);
 
+#if 0
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+	wait_for_DQ7(info, l_sect);
+
+      DONE:
+#endif
 	/* reset to read mode */
 	addr = (FLASH_WORD_SIZE *) info->start[0];
 	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
@@ -512,36 +440,45 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	ulong cp, wp, data;
 	int i, l, rc;
+	ulong status_value = 0;
 
-	wp = (addr & ~3);		/* get lower word aligned address */
+	wp = (addr & ~3);	/* get lower word aligned address */
 
 	/*
 	 * handle unaligned start bytes
 	 */
 	if ((l = addr - wp) != 0) {
 		data = 0;
-	    for (i = 0, cp = wp; i < l; ++i, ++cp) {
-		    data = (data << 8) | (*(uchar *) cp);
-	    }
-	    for (; i < 4 && cnt > 0; ++i) {
-		    data = (data << 8) | *src++;
-		    --cnt;
-		    ++cp;
-	    }
-	    for (; cnt == 0 && i < 4; ++i, ++cp) {
-		    data = (data << 8) | (*(uchar *) cp);
-	    }
-
-	    if ((rc = write_word(info, wp, data)) != 0) {
-		    return (rc);
-	    }
-	    wp += 4;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
 	}
 
 	/*
 	 * handle word aligned part
 	 */
 	while (cnt >= 4) {
+
+		/*print status if needed */
+		if ((wp >= (status_value + 0x20000))
+		    && (status_value < 0xFFFE0000)) {
+			status_value = wp;
+			printf("writing to sector 0x%X\n", status_value);
+		}
+
 		data = 0;
 		for (i = 0; i < 4; ++i) {
 			data = (data << 8) | *src++;
@@ -580,14 +517,14 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile vu_long *addr2 = (vu_long *) (info->start[0]);
 	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
 	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
 	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	if ((*((volatile FLASH_WORD_SIZE *)dest) &
 	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
 		return (2);
 	}
@@ -598,9 +535,18 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+		    (FLASH_WORD_SIZE) 0x00AA;
+		asm("sync");
+		asm("isync");
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
+		    (FLASH_WORD_SIZE) 0x0055;
+		asm("sync");
+		asm("isync");
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+		    (FLASH_WORD_SIZE) 0x00A0;
+		asm("sync");
+		asm("isync");
 
 		dest2[i] = data2[i];
 
@@ -621,3 +567,6 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 	return (0);
 }
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S
new file mode 100644
index 0000000000..7ba43c7b06
--- /dev/null
+++ b/board/amcc/yellowstone/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_8M       0x00000060
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+	/*
+		0xf0000000 must be first, before relocation SA_I must be off to use the
+	    dcache as stack. It is patched after relocation to enable SA_I
+	*/
+    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+    /* PCI */
+    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+    /* USB 2.0 Device */
+    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+    tlbtab_end
diff --git a/board/amcc/yellowstone/u-boot.lds b/board/amcc/yellowstone/u-boot.lds
new file mode 100644
index 0000000000..769eed3ef7
--- /dev/null
+++ b/board/amcc/yellowstone/u-boot.lds
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/amcc/yellowstone/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
new file mode 100644
index 0000000000..840a46c865
--- /dev/null
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -0,0 +1,426 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+
+	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfe0ba000);	/* BAS=0xfe0 32MB r/w 16-bit */
+
+	mtebc(pb1ap, 0x00000000);
+	mtebc(pb1cr, 0x00000000);
+
+	mtebc(pb2ap, 0x04814500);
+	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
+
+	mtebc(pb3ap, 0x00000000);
+	mtebc(pb3cr, 0x00000000);
+
+	mtebc(pb4ap, 0x00000000);
+	mtebc(pb4cr, 0x00000000);
+
+	mtebc(pb5ap, 0x00000000);
+	mtebc(pb5cr, 0x00000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 *-------------------------------------------------------------------*/
+	/*CPLD cs */
+	/*setup Address lines for flash sizes larger than 16Meg. */
+	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+	/*setup emac */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+	/*UART1 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+	/*setup USB 2.0 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+	/*--------------------------------------------------------------------
+	 * Setup other serial configuration
+	 *-------------------------------------------------------------------*/
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
+	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+
+	/*clear tmrclk divisor */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+	/*enable ethernet */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+	/*enable usb 1.1 fs device and remove usb 2.0 reset */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+	/*get rid of flash write protect */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+
+	printf("Board: AMCC YELLOWSTONE\n");
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+	return (0);
+}
+
+/*************************************************************************
+ *  sdram_init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    256 MB, ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_clktr, 0x40000000);	/* ?? */
+	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
+
+	/*clear this first, if the DDR is enabled by a debugger
+	   then you can not make changes. */
+	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
+	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
+	mtsdram(mem_tr1, 0x8080080b);	/* ?? */
+	mtsdram(mem_rtr, 0x04080000);	/* ?? */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	udelay(400);		/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+
+	for (;;) {
+		mfsdram(mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+}
+
+/*************************************************************************
+ *  long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+	sdram_init();
+	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	for (k = 0; k < CFG_KBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long strap;
+	unsigned long addr;
+
+	/*--------------------------------------------------------------------------+
+     *	Bamboo is always configured as the host & requires the
+     *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+		printf("PCI: SDR0_STRP1[PAE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return 0;
+	}
+
+    /*-------------------------------------------------------------------------+
+    | Set priority for all PLB3 devices to 0.
+    | Set PLB3 arbiter to fair mode.
+    +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+    /*-------------------------------------------------------------------------+
+    | Set priority for all PLB4 devices to 0.
+    +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+    /*-------------------------------------------------------------------------+
+    | Set Nebula PLB4 arbiter to fair mode.
+    +-------------------------------------------------------------------------*/
+	/*  Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	u16 cmdstat;
+
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+   /*--------------------------------------------------------------------------+
+   | PowerPC440 EP PCI Master configuration.
+   | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+   |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+   |   Use byte reversed out routines to handle endianess.
+   | Make this region non-prefetchable.
+   +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+   /*--------------------------------------------------------------------------+
+   | Write the PowerPC440 EP PCI Configuration regs.
+   |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+   |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+   +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Bamboo is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  hw_watchdog_reset
+ *
+ *	This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+}
+#endif
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
new file mode 100644
index 0000000000..5654f91a83
--- /dev/null
+++ b/board/amcc/yosemite/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+OBJS   += flash.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk
new file mode 100644
index 0000000000..4ab0ea0084
--- /dev/null
+++ b/board/amcc/yosemite/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/yosemite/flash.c b/board/amcc/yosemite/flash.c
new file mode 100644
index 0000000000..cd6a2e61e6
--- /dev/null
+++ b/board/amcc/yosemite/flash.c
@@ -0,0 +1,571 @@
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+/*
+ * Ported to XPedite1000, 1/2 mb boot flash only
+ * Travis B. Sawyer, <travis.sawyer@sandburst.com>
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+#define BOOT_SMALL_FLASH	32	/* 00100000 */
+#define FLASH_ONBD_N		2	/* 00000010 */
+#define FLASH_SRAM_SEL		1	/* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL	4
+#define FLASH_ONBD_N_VAL	2
+#define FLASH_SRAM_SEL_VAL	1
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips   */
+
+unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
+	{0xfe000000}
+
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+#define ADDR0		0xaaaa
+#define ADDR1		0x5554
+#define FLASH_WORD_SIZE unsigned short
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned short index = 0;
+	int i;
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *)
+					   flash_addr_table[index][i],
+					   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf
+			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			     i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		total_b += flash_info[i].size;
+	}
+
+	/* FLASH protect Monitor */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
+
+	return total_b;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_AM040:
+		printf("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:
+		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM160B:
+		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:
+		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:
+		printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		break;
+	}
+
+	printf("  Size: %ld KB in %d Sectors\n",
+	       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s%s",
+		       info->start[i],
+		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
+	}
+	printf("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* Write auto select command: read Manufacturer ID */
+	udelay(10000);
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
+	udelay(1000);
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
+	udelay(1000);
+	*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
+	udelay(1000);
+
+	value = addr2[0];
+
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+	case (FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[0];	/* device ID            */
+	debug("\ndev_code=%x\n", value);
+#else
+	value = addr2[1];	/* device ID            */
+#endif
+
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	info->flash_id = 0;
+	info->sector_count = CFG_MAX_FLASH_SECT;
+	info->size = 0x02000000;
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = (int)base + (i * 0x00020000);
+		info->protect[i] = 0;
+	}
+
+	*(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0;	/* reset bank */
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr =
+	    (FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
+	       (FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+			printf("Erasing sector %p\n", addr2);
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x00AA;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+			    (FLASH_WORD_SIZE) 0x0055;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x0080;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+			    (FLASH_WORD_SIZE) 0x00AA;
+			asm("sync");
+			asm("isync");
+			*(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+			    (FLASH_WORD_SIZE) 0x0055;
+			asm("sync");
+			asm("isync");
+			addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			asm("sync");
+			asm("isync");
+
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+#if 0
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+	wait_for_DQ7(info, l_sect);
+
+      DONE:
+#endif
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+	ulong status_value = 0;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+
+		/*print status if needed */
+		if ((wp >= (status_value + 0x20000))
+		    && (status_value < 0xFFFE0000)) {
+			status_value = wp;
+			printf("writing to sector 0x%X\n", status_value);
+		}
+
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+	vu_long *addr2 = (vu_long *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *)dest) &
+	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+		    (FLASH_WORD_SIZE) 0x00AA;
+		asm("sync");
+		asm("isync");
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
+		    (FLASH_WORD_SIZE) 0x0055;
+		asm("sync");
+		asm("isync");
+		*(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+		    (FLASH_WORD_SIZE) 0x00A0;
+		asm("sync");
+		asm("isync");
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
new file mode 100644
index 0000000000..7ba43c7b06
--- /dev/null
+++ b/board/amcc/yosemite/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_8M       0x00000060
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+	/*
+		0xf0000000 must be first, before relocation SA_I must be off to use the
+	    dcache as stack. It is patched after relocation to enable SA_I
+	*/
+    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+    /* PCI */
+    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+    /* USB 2.0 Device */
+    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+    tlbtab_end
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
new file mode 100644
index 0000000000..62dc988d93
--- /dev/null
+++ b/board/amcc/yosemite/u-boot.lds
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/amcc/yosemite/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
new file mode 100644
index 0000000000..6c8a883e18
--- /dev/null
+++ b/board/amcc/yosemite/yosemite.c
@@ -0,0 +1,424 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+
+	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfe0ba000);	/* BAS=0xfe0 32MB r/w 16-bit */
+
+	mtebc(pb1ap, 0x00000000);
+	mtebc(pb1cr, 0x00000000);
+
+	mtebc(pb2ap, 0x04814500);
+	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
+
+	mtebc(pb3ap, 0x00000000);
+	mtebc(pb3cr, 0x00000000);
+
+	mtebc(pb4ap, 0x00000000);
+	mtebc(pb4cr, 0x00000000);
+
+	mtebc(pb5ap, 0x00000000);
+	mtebc(pb5cr, 0x00000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 *-------------------------------------------------------------------*/
+	/*CPLD cs */
+	/*setup Address lines for flash sizes larger than 16Meg. */
+	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+	/*setup emac */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+	/*UART1 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+	/*setup USB 2.0 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+	/*--------------------------------------------------------------------
+	 * Setup other serial configuration
+	 *-------------------------------------------------------------------*/
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
+	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+
+	/*clear tmrclk divisor */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+	/*enable ethernet */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+	/*enable usb 1.1 fs device and remove usb 2.0 reset */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+	/*get rid of flash write protect */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+
+	printf("Board: AMCC YOSEMITE\n");
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+	return (0);
+}
+
+/*************************************************************************
+ *  sdram_init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    256 MB, ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_clktr, 0x40000000);	/* ?? */
+	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
+
+	/*clear this first, if the DDR is enabled by a debugger
+	   then you can not make changes. */
+	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
+
+	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
+	mtsdram(mem_tr1, 0x8080080b);	/* ?? */
+	mtsdram(mem_rtr, 0x04080000);	/* ?? */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	udelay(400);		/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+
+	for (;;) {
+		mfsdram(mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+}
+
+/*************************************************************************
+ *  long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+	sdram_init();
+	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	for (k = 0; k < CFG_KBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long strap;
+	unsigned long addr;
+
+	/*--------------------------------------------------------------------------+
+	 *	Bamboo is always configured as the host & requires the
+	 *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+		printf("PCI: SDR0_STRP1[PAE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return 0;
+	}
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440 EP PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Bamboo is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  hw_watchdog_reset
+ *
+ *	This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c
deleted file mode 100644
index 0be7965079..0000000000
--- a/board/bubinga405ep/bubinga405ep.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-long int spd_sdram (void);
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-int board_early_init_f (void)
-{
-	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
-	mtdcr (uicer, 0x00000000);      /* disable all ints */
-	mtdcr (uiccr, 0x00000010);
-	mtdcr (uicpr, 0xFFFF7FF0);      /* set int polarities */
-	mtdcr (uictr, 0x00000010);      /* set int trigger levels */
-	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
-
-#if 0
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-    /* CS1 */
-	/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb1ap, 0x02815480);
-	mtebc (pb1cr, 0xF0018000);
-
-	p = (unsigned int*)0xEF600708;
-	t = *p;
-	t = t | 0x00000400;
-	*p = t;
-
-	/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb2ap, 0x04815A80);
-	mtebc (pb2cr, 0xF0118000);
-
-	/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb3ap, 0x01815280);
-	mtebc (pb3cr, 0xF0218000);
-
-	/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb7ap, 0x01815280);
-	mtebc (pb7cr, 0xF0318000);
-
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *) (FPGA_BRDC) |= 0x1;
-
-#endif
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	unsigned char *s = getenv ("serial#");
-
-	puts ("Board: IBM 405EP Eval Board");
-
-	if (s != NULL) {
-		puts (", serial# ");
-		puts (s);
-	}
-	putc ('\n');
-
-	return (0);
-}
-
-
-/* -------------------------------------------------------------------------
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-   ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
-	long int ret;
-
-	ret = spd_sdram ();
-	return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/bubinga405ep/bubinga405ep.h b/board/bubinga405ep/bubinga405ep.h
deleted file mode 100644
index 5fc313a258..0000000000
--- a/board/bubinga405ep/bubinga405ep.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/board/bubinga405ep/flash.c b/board/bubinga405ep/flash.c
deleted file mode 100644
index 85179d0f2f..0000000000
--- a/board/bubinga405ep/flash.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_BUBINGA405EP
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 << 20);
-	}
-
-	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
-		/* Setup offsets */
-		flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
-		/* Monitor protection ON by default */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      FLASH_BASE0_PRELIM,
-				      FLASH_BASE0_PRELIM + CFG_MONITOR_LEN - 1,
-				      &flash_info[0]);
-		/* Also protect sector containing initial power-up instruction */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
-		size_b1 = 0;
-		flash_info[0].size = size_b0;
-	}
-
-	/* 2 banks */
-	else {
-		size_b1 = flash_get_size ((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1]);
-
-		/* Re-do sizing to get full correct info */
-
-		if (size_b1) {
-			mtdcr (ebccfga, pb0cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb0cr);
-			base_b1 = -size_b1;
-			pbcr = (pbcr & 0x0001ffff) | base_b1 |
-				(((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*          printf("pb1cr = %x\n", pbcr); */
-		}
-
-		if (size_b0) {
-			mtdcr (ebccfga, pb1cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb1cr);
-			base_b0 = base_b1 - size_b0;
-			pbcr = (pbcr & 0x0001ffff) | base_b0 |
-				(((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*            printf("pb0cr = %x\n", pbcr); */
-		}
-
-		size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-		flash_get_offsets (base_b0, &flash_info[0]);
-
-		/* monitor protection ON by default */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      base_b0 + size_b0 - CFG_MONITOR_LEN,
-				      base_b0 + size_b0 - 1, &flash_info[0]);
-		/* Also protect sector containing initial power-up instruction */
-		/* (flash_protect() checks address range - other call ignored) */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
-
-		if (size_b1) {
-			/* Re-do sizing to get full correct info */
-			size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-			flash_get_offsets (base_b1, &flash_info[1]);
-
-			/* monitor protection ON by default */
-			(void) flash_protect (FLAG_PROTECT_SET,
-					      base_b1 + size_b1 - CFG_MONITOR_LEN,
-					      base_b1 + size_b1 - 1,
-					      &flash_info[1]);
-			/* monitor protection OFF by default (one is enough) */
-			(void) flash_protect (FLAG_PROTECT_CLEAR,
-					      base_b0 + size_b0 - CFG_MONITOR_LEN,
-					      base_b0 + size_b0 - 1,
-					      &flash_info[0]);
-		} else {
-			flash_info[1].flash_id = FLASH_UNKNOWN;
-			flash_info[1].sector_count = -1;
-		}
-
-		flash_info[0].size = size_b0;
-		flash_info[1].size = size_b1;
-	}			/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *) info->start[i];
-		size = size >> 2;	/* divide by 4 for longword access */
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xffffffff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-#if 0				/* test-only */
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     "
-#else
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ", info->protect[i] ? "RO " : "   "
-#endif
-			);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[2];
-#else
-	value = addr2[0];
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE) SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-	}
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[0];	/* device ID            */
-	/*        printf("\ndev_code=%x\n", value); */
-#else
-	value = addr2[1];	/* device ID            */
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;	/* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE) AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB            */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB            */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-#if 0				/* enable when device IDs are available */
-	case (FLASH_WORD_SIZE) AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-#endif
-	case (FLASH_WORD_SIZE) SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) SST_ID_xF160A:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		info->protect[i] = addr2[4] & 1;
-#else
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-#endif
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#if 0				/* test-only */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile unsigned char *) info->start[0];
-		addr2[ADDR0] = 0xAA;
-		addr2[ADDR1] = 0x55;
-		addr2[ADDR0] = 0xF0;	/* reset bank */
-#else
-		addr2 = (FLASH_WORD_SIZE *) info->start[0];
-		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-#endif
-#else  /* test-only */
-		addr2 = (FLASH_WORD_SIZE *) info->start[0];
-		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-#endif /* test-only */
-	}
-
-	return (info->size);
-}
-
-int wait_for_DQ7 (flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer (0);
-	last = 0;
-	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
-			printf ("Erasing sector %p\n", addr2);	/* CLH */
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay (1000);	/* wait 1 ms */
-			} else {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			l_sect = sect;
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7 (info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-#if 0
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-	wait_for_DQ7 (info, l_sect);
-
-      DONE:
-#endif
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts ();
-
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/bubinga405ep/init.S b/board/bubinga405ep/init.S
deleted file mode 100644
index e47852595f..0000000000
--- a/board/bubinga405ep/init.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/*       This source code has been made available to you by IBM on an AS-IS */
-/*       basis.  Anyone receiving this source is licensed under IBM */
-/*       copyrights to use it in any way he or she deems fit, including */
-/*       copying it, modifying it, compiling it, and redistributing it either */
-/*       with or without modifications.  No license under IBM patents or */
-/*       patent applications is to be implied by the copyright license. */
-/* */
-/*       Any user of this software should understand that IBM cannot provide */
-/*       technical support for this software and will not be responsible for */
-/*       any consequences resulting from the use of this software. */
-/* */
-/*       Any person who transfers this source code or any derivative work */
-/*       must include the IBM copyright notice, this paragraph, and the */
-/*       preceding two paragraphs in the transferred software. */
-/* */
-/*       COPYRIGHT   I B M   CORPORATION 1995 */
-/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function:     ext_bus_cntlr_init */
-/* Description:  Initializes the External Bus Controller for the external */
-/*		peripherals. IMPORTANT: For pass1 this code must run from */
-/*		cache since you can not reliably change a peripheral banks */
-/*		timing register (pbxap) while running code from that bank. */
-/*		For ex., since we are running from ROM on bank 0, we can NOT */
-/*		execute the code that modifies bank 0 timings from ROM, so */
-/*		we run it from cache. */
-/*	Bank 0 - Flash and SRAM */
-/*	Bank 1 - NVRAM/RTC */
-/*	Bank 2 - Keyboard/Mouse controller */
-/*	Bank 3 - IR controller */
-/*	Bank 4 - not used */
-/*	Bank 5 - not used */
-/*	Bank 6 - not used */
-/*	Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-/*----------------------------------------------------------------------------- */
-/* Function:     sdram_init */
-/* Description:  Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
-	.globl  sdram_init
-sdram_init:
-	blr
diff --git a/board/bubinga405ep/u-boot.lds.debug b/board/bubinga405ep/u-boot.lds.debug
deleted file mode 100644
index df50b7d198..0000000000
--- a/board/bubinga405ep/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-/*
-    cpu/ppc4xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-*/
-    cpu/ppc4xx/start.o	(.text)
-    board/bubinga405ep/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/405gp_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 0bd43bd023..1f6512d0ea 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -261,7 +261,7 @@ nand_init(void)
 	debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE);
 	totlen += nand_probe (CFG_NAND1_BASE);
 
-	printf ("%4lu MB\n", totlen >>20);
+	printf ("%3lu MB\n", totlen >>20);
 }
 #endif
 
diff --git a/board/ebony/ebony.h b/board/ebony/ebony.h
deleted file mode 100644
index 73d489ea59..0000000000
--- a/board/ebony/ebony.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
deleted file mode 100644
index d8b47571d4..0000000000
--- a/board/ebony/flash.c
+++ /dev/null
@@ -1,743 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define     BOOT_SMALL_FLASH        32              /* 00100000 */
-#define     FLASH_ONBD_N            2               /* 00000010 */
-#define     FLASH_SRAM_SEL          1               /* 00000001 */
-
-#define     BOOT_SMALL_FLASH_VAL    4
-#define     FLASH_ONBD_N_VAL        2
-#define     FLASH_SRAM_SEL_VAL      1
-
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-static  unsigned    long    flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
-	{0xffc00000, 0xffe00000, 0xff880000},   /* 0:000: configuraton 3 */
-	{0xffc00000, 0xffe00000, 0xff800000},   /* 1:001: configuraton 4 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 2:010: configuraton 7 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 3:011: configuraton 8 */
-	{0xff800000, 0xffa00000, 0xfff80000},   /* 4:100: configuraton 1 */
-	{0xff800000, 0xffa00000, 0xfff00000},   /* 5:101: configuraton 2 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 6:110: configuraton 5 */
-	{0xffc00000, 0xffe00000, 0x00000000}    /* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_EBONY
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void) {
-	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
-	unsigned char switch_status;
-	unsigned short index = 0;
-	int i;
-
-
-	/* read FPGA base register FPGA_REG0 */
-	switch_status = *fpga_base;
-
-	/* check the bitmap of switch status */
-	if (switch_status & BOOT_SMALL_FLASH) {
-		index += BOOT_SMALL_FLASH_VAL;
-	}
-	if (switch_status & FLASH_ONBD_N) {
-		index += FLASH_ONBD_N_VAL;
-	}
-	if (switch_status & FLASH_SRAM_SEL) {
-		index += FLASH_SRAM_SEL_VAL;
-	}
-
-    DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size(
-			(vu_long *)flash_addr_table[index][i], &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i, size_b[i], size_b[i]<<20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040) ||
-	    (info->flash_id  == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type	*/
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type		*/
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMD016:	printf ("AM29F016D (16 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-		break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-		break;
-	default:		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-			size = info->start[i+1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;        /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		{
-			if (*flash++ != 0xffffffff)
-			{
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-			printf (" %08lX%s%s",
-				info->start[i],
-				erased ? " E" : "  ",
-				info->protect[i] ? "RO " : "   "
-				);
-			}
-		printf ("\n");
-		return;
-	}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-	static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-		{
-			short i;
-			FLASH_WORD_SIZE value;
-			ulong base = (ulong)addr;
-			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-	    DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
-			/* Write auto select command: read Manufacturer ID */
-	    udelay(10000);
-			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-	    udelay(1000);
-			addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-	    udelay(1000);
-			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-	    udelay(1000);
-
-#ifdef CONFIG_ADCIOP
-			value = addr2[2];
-#else
-			value = addr2[0];
-#endif
-
-			DEBUGF("FLASH MANUFACT: %x\n", value);
-
-			switch (value) {
-			case (FLASH_WORD_SIZE)AMD_MANUFACT:
-				info->flash_id = FLASH_MAN_AMD;
-				break;
-			case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-				info->flash_id = FLASH_MAN_FUJ;
-				break;
-			case (FLASH_WORD_SIZE)SST_MANUFACT:
-				info->flash_id = FLASH_MAN_SST;
-				break;
-			case (FLASH_WORD_SIZE)STM_MANUFACT:
-				info->flash_id = FLASH_MAN_STM;
-				break;
-			default:
-				info->flash_id = FLASH_UNKNOWN;
-				info->sector_count = 0;
-				info->size = 0;
-				return (0);			/* no or unknown flash	*/
-			}
-
-#ifdef CONFIG_ADCIOP
-			value = addr2[0];			/* device ID		*/
-			debug ("\ndev_code=%x\n", value);
-#else
-			value = addr2[1];			/* device ID		*/
-#endif
-
-			DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-			switch (value) {
-			case (FLASH_WORD_SIZE)AMD_ID_F016D:
-				info->flash_id += FLASH_AMD016;
-				info->sector_count = 32;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-			case (FLASH_WORD_SIZE)STM_ID_F040B:
-				info->flash_id += FLASH_AM040;
-				info->sector_count = 8;
-				info->size = 0x0080000; /* => 512 ko */
-				break;
-			case (FLASH_WORD_SIZE)AMD_ID_F040B:
-				info->flash_id += FLASH_AM040;
-				info->sector_count = 8;
-				info->size = 0x0080000; /* => 512 ko */
-				break;
-			case (FLASH_WORD_SIZE)AMD_ID_LV400T:
-				info->flash_id += FLASH_AM400T;
-				info->sector_count = 11;
-				info->size = 0x00080000;
-				break;				/* => 0.5 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV400B:
-				info->flash_id += FLASH_AM400B;
-				info->sector_count = 11;
-				info->size = 0x00080000;
-				break;				/* => 0.5 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV800T:
-				info->flash_id += FLASH_AM800T;
-				info->sector_count = 19;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV800B:
-				info->flash_id += FLASH_AM800B;
-				info->sector_count = 19;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV160T:
-				info->flash_id += FLASH_AM160T;
-				info->sector_count = 35;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV160B:
-				info->flash_id += FLASH_AM160B;
-				info->sector_count = 35;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-#if 0	/* enable when device IDs are available */
-			case (FLASH_WORD_SIZE)AMD_ID_LV320T:
-				info->flash_id += FLASH_AM320T;
-				info->sector_count = 67;
-				info->size = 0x00400000;
-				break;				/* => 4 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV320B:
-				info->flash_id += FLASH_AM320B;
-				info->sector_count = 67;
-				info->size = 0x00400000;
-				break;				/* => 4 MB		*/
-#endif
-			case (FLASH_WORD_SIZE)SST_ID_xF800A:
-				info->flash_id += FLASH_SST800A;
-				info->sector_count = 16;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)SST_ID_xF160A:
-				info->flash_id += FLASH_SST160A;
-				info->sector_count = 32;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-
-			default:
-				info->flash_id = FLASH_UNKNOWN;
-				return (0);			/* => no or unknown flash */
-
-			}
-
-			/* set up sector start address table */
-			if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-			    (info->flash_id  == FLASH_AM040) ||
-			    (info->flash_id  == FLASH_AMD016)) {
-				for (i = 0; i < info->sector_count; i++)
-					info->start[i] = base + (i * 0x00010000);
-			} else {
-				if (info->flash_id & FLASH_BTYPE) {
-					/* set sector offsets for bottom boot block type	*/
-					info->start[0] = base + 0x00000000;
-					info->start[1] = base + 0x00004000;
-					info->start[2] = base + 0x00006000;
-					info->start[3] = base + 0x00008000;
-					for (i = 4; i < info->sector_count; i++) {
-						info->start[i] = base + (i * 0x00010000) - 0x00030000;
-					}
-				} else {
-					/* set sector offsets for top boot block type		*/
-					i = info->sector_count - 1;
-					info->start[i--] = base + info->size - 0x00004000;
-					info->start[i--] = base + info->size - 0x00006000;
-					info->start[i--] = base + info->size - 0x00008000;
-					for (; i >= 0; i--) {
-						info->start[i] = base + i * 0x00010000;
-					}
-				}
-			}
-
-			/* check for protected sectors */
-			for (i = 0; i < info->sector_count; i++) {
-				/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-				/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-				info->protect[i] = addr2[4] & 1;
-#else
-				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-				if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-					info->protect[i] = 0;
-				else
-					info->protect[i] = addr2[2] & 1;
-#endif
-			}
-
-			/*
-			 * Prevent writes to uninitialized FLASH.
-			 */
-			if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
-				addr2 = (volatile unsigned char *)info->start[0];
-				addr2[ADDR0] = 0xAA;
-				addr2[ADDR1] = 0x55;
-				addr2[ADDR0] = 0xF0;  /* reset bank */
-#else
-				addr2 = (FLASH_WORD_SIZE *)info->start[0];
-				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif
-#else /* test-only */
-				addr2 = (FLASH_WORD_SIZE *)info->start[0];
-				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif /* test-only */
-			}
-
-			return (info->size);
-		}
-
-	int wait_for_DQ7(flash_info_t *info, int sect)
-		{
-			ulong start, now, last;
-			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
-			start = get_timer (0);
-			last  = start;
-			while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					return -1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {  /* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-			return 0;
-		}
-
-/*-----------------------------------------------------------------------
- */
-
-	int	flash_erase (flash_info_t *info, int s_first, int s_last)
-		{
-			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-			volatile FLASH_WORD_SIZE *addr2;
-			int flag, prot, sect, l_sect;
-			int i;
-
-			if ((s_first < 0) || (s_first > s_last)) {
-				if (info->flash_id == FLASH_UNKNOWN) {
-					printf ("- missing\n");
-				} else {
-					printf ("- no sectors to erase\n");
-				}
-				return 1;
-			}
-
-			if (info->flash_id == FLASH_UNKNOWN) {
-				printf ("Can't erase unknown flash type - aborted\n");
-				return 1;
-			}
-
-			prot = 0;
-			for (sect=s_first; sect<=s_last; ++sect) {
-				if (info->protect[sect]) {
-					prot++;
-				}
-			}
-
-			if (prot) {
-				printf ("- Warning: %d protected sectors will not be erased!\n",
-					prot);
-			} else {
-				printf ("\n");
-			}
-
-			l_sect = -1;
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Start erase on unprotected sectors */
-			for (sect = s_first; sect<=s_last; sect++) {
-				if (info->protect[sect] == 0) {	/* not protected */
-					addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
-					printf("Erasing sector %p\n", addr2);
-
-					if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
-						for (i=0; i<50; i++)
-							udelay(1000);  /* wait 1 ms */
-					} else {
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-					}
-					l_sect = sect;
-					/*
-					 * Wait for each sector to complete, it's more
-					 * reliable.  According to AMD Spec, you must
-					 * issue all erase commands within a specified
-					 * timeout.  This has been seen to fail, especially
-					 * if printf()s are included (for debug)!!
-					 */
-					wait_for_DQ7(info, sect);
-				}
-			}
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay (1000);
-
-#if 0
-			/*
-			 * We wait for the last triggered sector
-			 */
-			if (l_sect < 0)
-				goto DONE;
-			wait_for_DQ7(info, l_sect);
-
-		DONE:
-#endif
-			/* reset to read mode */
-			addr = (FLASH_WORD_SIZE *)info->start[0];
-			addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-			printf (" done\n");
-			return 0;
-		}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-	int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-		{
-			ulong cp, wp, data;
-			int i, l, rc;
-
-			wp = (addr & ~3);	/* get lower word aligned address */
-
-			/*
-			 * handle unaligned start bytes
-			 */
-			if ((l = addr - wp) != 0) {
-				data = 0;
-				for (i=0, cp=wp; i<l; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *)cp);
-				}
-				for (; i<4 && cnt>0; ++i) {
-					data = (data << 8) | *src++;
-					--cnt;
-					++cp;
-				}
-				for (; cnt==0 && i<4; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *)cp);
-				}
-
-				if ((rc = write_word(info, wp, data)) != 0) {
-					return (rc);
-				}
-				wp += 4;
-			}
-
-			/*
-			 * handle word aligned part
-			 */
-			while (cnt >= 4) {
-				data = 0;
-				for (i=0; i<4; ++i) {
-					data = (data << 8) | *src++;
-				}
-				if ((rc = write_word(info, wp, data)) != 0) {
-					return (rc);
-				}
-				wp  += 4;
-				cnt -= 4;
-			}
-
-			if (cnt == 0) {
-				return (0);
-			}
-
-			/*
-			 * handle unaligned tail bytes
-			 */
-			data = 0;
-			for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-				data = (data << 8) | *src++;
-				--cnt;
-			}
-			for (; i<4; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *)cp);
-			}
-
-			return (write_word(info, wp, data));
-		}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-	static int write_word (flash_info_t * info, ulong dest, ulong data)
-		{
-			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-			volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-			volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-			ulong start;
-			int i;
-
-			/* Check if Flash is (sufficiently) erased */
-			if ((*((volatile FLASH_WORD_SIZE *) dest) &
-			     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-				return (2);
-			}
-
-			for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-				int flag;
-
-				/* Disable interrupts which might cause a timeout here */
-				flag = disable_interrupts ();
-
-				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-				dest2[i] = data2[i];
-
-				/* re-enable interrupts if necessary */
-				if (flag)
-					enable_interrupts ();
-
-				/* data polling for D7 */
-				start = get_timer (0);
-				while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-				       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-					if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-						return (1);
-					}
-				}
-			}
-
-			return (0);
-		}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/ebony/u-boot.lds.debug b/board/ebony/u-boot.lds.debug
deleted file mode 100644
index af497b17ab..0000000000
--- a/board/ebony/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    ppc/vsprintf.o	(.text)
-    ppc/crc32.o		(.text)
-    ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index 03b3cdfae3..4acddefa50 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -208,22 +208,22 @@ void reset_phy (void)
 }
 
 static unsigned long UPMATable[] = {
-	0x8fffec00,  0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc00, //Words 0 to 3
-	0x0ffcfc04,  0x3ffdfc00,  0xfffffc01,  0xfffffc01, //Words 4 to 7
-	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, //Words 8 to 11
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 12 to 15
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 16 to 19
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 20 to 23
-	0x8fffec00,  0x00fffc00,  0x00fffc00,  0x00fffc00, //Words 24 to 27
-	0x0ffffc04,  0xfffffc01,  0xfffffc01,  0xfffffc01, //Words 28 to 31
-	0xfffffc00,  0xfffffc01,  0xfffffc01,  0xfffffc00, //Words 32 to 35
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 36 to 39
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 40 to 43
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 44 to 47
-	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, //Words 48 to 51
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, //Words 52 to 55
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, //Words 56 to 59
-	0xffffec00,  0xffffec04,  0xffffec00,  0xfffffc01  //Words 60 to 63
+	0x8fffec00,  0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc00, /* Words 0 to 3	*/
+	0x0ffcfc04,  0x3ffdfc00,  0xfffffc01,  0xfffffc01, /* Words 4 to 7	*/
+	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, /* Words 8 to 11	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 12 to 15	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 16 to 19	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 20 to 23	*/
+	0x8fffec00,  0x00fffc00,  0x00fffc00,  0x00fffc00, /* Words 24 to 27	*/
+	0x0ffffc04,  0xfffffc01,  0xfffffc01,  0xfffffc01, /* Words 28 to 31	*/
+	0xfffffc00,  0xfffffc01,  0xfffffc01,  0xfffffc00, /* Words 32 to 35	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 36 to 39	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 40 to 43	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 44 to 47	*/
+	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, /* Words 48 to 51	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 52 to 55	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 56 to 59	*/
+	0xffffec00,  0xffffec04,  0xffffec00,  0xfffffc01  /* Words 60 to 63	*/
 };
 
 int board_early_init_f (void)
diff --git a/board/ocotea/u-boot.lds.debug b/board/ocotea/u-boot.lds.debug
deleted file mode 100644
index 41534de2be..0000000000
--- a/board/ocotea/u-boot.lds.debug
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/ocotea/init.o (.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/440gx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
index 572cc9bbeb..386822179d 100644
--- a/board/pm520/flash.c
+++ b/board/pm520/flash.c
@@ -75,6 +75,8 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info);
 static int write_data (flash_info_t *info, ulong dest, FPW data);
 static void flash_get_offsets (ulong base, flash_info_t *info);
 void inline spin_wheel (void);
+static void flash_sync_real_protect (flash_info_t * info);
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
 
 /*-----------------------------------------------------------------------
  */
@@ -101,6 +103,9 @@ unsigned long flash_init (void)
 			break;
 		}
 		size += flash_info[i].size;
+
+		/* get the h/w and s/w protection status in sync */
+		flash_sync_real_protect(&flash_info[i]);
 	}
 
 	/* Protect monitor and environment sectors
@@ -138,7 +143,6 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 		for (i = 0; i < info->sector_count; i++) {
 			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
 		}
 	}
 }
@@ -270,6 +274,83 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 }
 
 
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+static void flash_sync_real_protect (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+
+	case FLASH_28F128J3A:
+	case FLASH_28F640J3A:
+	case FLASH_28F320J3A:
+		for (i = 0; i < info->sector_count; ++i) {
+			info->protect[i] = intel_sector_protected(info, i);
+		}
+		break;
+	default:
+		/* no h/w protect support */
+		break;
+	}
+}
+
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
+{
+	FPWV *addr;
+	FPWV *lock_conf_addr;
+	ulong start;
+	unsigned char ret;
+
+	/*
+	 * first, wait for the WSM to be finished. The rationale for
+	 * waiting for the WSM to become idle for at most
+	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * because of: (1) erase, (2) program or (3) lock bit
+	 * configuration. So we just wait for the longest timeout of
+	 * the (1)-(3), i.e. the erase timeout.
+	 */
+
+	/* wait at least 35ns (W12) before issuing Read Status Register */
+	udelay(1);
+	addr = (FPWV *) info->start[sector];
+	*addr = (FPW) INTEL_STATUS;
+
+	start = get_timer (0);
+	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+		if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+			*addr = (FPW) INTEL_RESET; /* restore read mode */
+			printf("WSM busy too long, can't get prot status\n");
+			return 1;
+		}
+	}
+
+	/* issue the Read Identifier Codes command */
+	*addr = (FPW) INTEL_READID;
+
+	/* wait at least 35ns (W12) before reading */
+	udelay(1);
+
+	/* Intel example code uses offset of 2 for 16 bit flash */
+	lock_conf_addr = (FPWV *) info->start[sector] + 2;
+	ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+	/* put flash back in read mode */
+	*addr = (FPW) INTEL_RESET;
+
+	return ret;
+}
+
 /*-----------------------------------------------------------------------
  */
 
@@ -491,7 +572,7 @@ void inline spin_wheel (void)
  * 0 - OK
  * 1 - Error (timeout, voltage problems, etc.)
  */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
+int flash_real_protect (flash_info_t *info, long sector, int prot)
 {
 	ulong start;
 	int i;
@@ -531,6 +612,11 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 	/*
 	 * Clear lock bit command clears all sectors lock bits, so
 	 * we have to restore lock bits of protected sectors.
+	 * WARNING: code below re-locks sectors only for one bank (info).
+	 * This causes problems on boards where several banks share
+	 * the same chip, as sectors in othere banks will be unlocked
+	 * but not re-locked. It works fine on pm520 though, as there
+	 * is only one chip and one bank.
 	 */
 	if (!prot)
 	{
@@ -553,6 +639,11 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 				}
 			}
 		}
+		/*
+		 * get the s/w sector protection status in sync with the h/w,
+		 * in case something went wrong during the re-locking.
+		 */
+		flash_sync_real_protect(info); /* resets flash to read  mode */
 	}
 
 	if (flag)
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
deleted file mode 100644
index 462c09eb6c..0000000000
--- a/board/walnut405/flash.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1)
-	  {
-	    /* Setup offsets */
-	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	    /* Monitor protection ON by default */
-	    (void)flash_protect(FLAG_PROTECT_SET,
-				FLASH_BASE0_PRELIM,
-				FLASH_BASE0_PRELIM+monitor_flash_len-1,
-				&flash_info[0]);
-	    size_b1 = 0 ;
-	    flash_info[0].size = size_b0;
-	  }
-
-	/* 2 banks */
-	else
-	  {
-	    size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	    /* Re-do sizing to get full correct info */
-
-	    if (size_b1)
-	      {
-		mtdcr(ebccfga, pb0cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb0cr);
-		base_b1 = -size_b1;
-		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
-	      }
-
-	    if (size_b0)
-	      {
-		mtdcr(ebccfga, pb1cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb1cr);
-		base_b0 = base_b1 - size_b0;
-		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
-	      }
-
-	    size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
-
-	    flash_get_offsets (base_b0, &flash_info[0]);
-
-	    /* monitor protection ON by default */
-	    (void)flash_protect(FLAG_PROTECT_SET,
-				base_b0+size_b0-monitor_flash_len,
-				base_b0+size_b0-1,
-				&flash_info[0]);
-
-	    if (size_b1) {
-	      /* Re-do sizing to get full correct info */
-	      size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
-
-	      flash_get_offsets (base_b1, &flash_info[1]);
-
-	      /* monitor protection ON by default */
-	      (void)flash_protect(FLAG_PROTECT_SET,
-				  base_b1+size_b1-monitor_flash_len,
-				  base_b1+size_b1-1,
-				  &flash_info[1]);
-	      /* monitor protection OFF by default (one is enough) */
-	      (void)flash_protect(FLAG_PROTECT_CLEAR,
-				  base_b0+size_b0-monitor_flash_len,
-				  base_b0+size_b0-1,
-				  &flash_info[0]);
-	    } else {
-	      flash_info[1].flash_id = FLASH_UNKNOWN;
-	      flash_info[1].sector_count = -1;
-	    }
-
-	    flash_info[0].size = size_b0;
-	    flash_info[1].size = size_b1;
-	  }/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040)){
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-		  size = info->start[i+1] - info->start[i];
-		else
-		  size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;        /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		  {
-		    if (*flash++ != 0xffffffff)
-		      {
-			erased = 0;
-			break;
-		      }
-		  }
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-#if 0 /* test-only */
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-#else
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ",
-			info->protect[i] ? "RO " : "   "
-#endif
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong)addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[2];
-#else
-	value = addr2[0];
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE)SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[0];			/* device ID		*/
-	/*        printf("\ndev_code=%x\n", value); */
-#else
-	value = addr2[1];			/* device ID		*/
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000; /* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE)AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-#if 0	/* enable when device IDs are available */
-	case (FLASH_WORD_SIZE)AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#endif
-	case (FLASH_WORD_SIZE)SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)SST_ID_xF160A:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040)){
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		info->protect[i] = addr2[4] & 1;
-#else
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-		  info->protect[i] = 0;
-		else
-		  info->protect[i] = addr2[2] & 1;
-#endif
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile unsigned char *)info->start[0];
-		addr2[ADDR0] = 0xAA;
-		addr2[ADDR1] = 0x55;
-		addr2[ADDR0] = 0xF0;  /* reset bank */
-#else
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif
-#else /* test-only */
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif /* test-only */
-	}
-
-	return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
-	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
-	start = get_timer (0);
-    last  = start;
-    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-	    printf ("Timeout\n");
-	    return -1;
-	}
-	/* show that we're waiting */
-	if ((now - last) > 1000) {  /* every second */
-	    putc ('.');
-	    last = now;
-	}
-    }
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
-		    printf("Erasing sector %p\n", addr2);	/* CLH */
-
-		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
-			for (i=0; i<50; i++)
-				udelay(1000);  /* wait 1 ms */
-		    } else {
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-		    }
-		    l_sect = sect;
-		    /*
-		     * Wait for each sector to complete, it's more
-		     * reliable.  According to AMD Spec, you must
-		     * issue all erase commands within a specified
-		     * timeout.  This has been seen to fail, especially
-		     * if printf()s are included (for debug)!!
-		     */
-		    wait_for_DQ7(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-#if 0
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-	wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	    (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts ();
-
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
deleted file mode 100644
index 70d029aeda..0000000000
--- a/board/walnut405/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/*       This source code has been made available to you by IBM on an AS-IS */
-/*       basis.  Anyone receiving this source is licensed under IBM */
-/*       copyrights to use it in any way he or she deems fit, including */
-/*       copying it, modifying it, compiling it, and redistributing it either */
-/*       with or without modifications.  No license under IBM patents or */
-/*       patent applications is to be implied by the copyright license. */
-/* */
-/*       Any user of this software should understand that IBM cannot provide */
-/*       technical support for this software and will not be responsible for */
-/*       any consequences resulting from the use of this software. */
-/* */
-/*       Any person who transfers this source code or any derivative work */
-/*       must include the IBM copyright notice, this paragraph, and the */
-/*       preceding two paragraphs in the transferred software. */
-/* */
-/*       COPYRIGHT   I B M   CORPORATION 1995 */
-/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function:     ext_bus_cntlr_init */
-/* Description:  Initializes the External Bus Controller for the external */
-/*		peripherals. IMPORTANT: For pass1 this code must run from */
-/*		cache since you can not reliably change a peripheral banks */
-/*		timing register (pbxap) while running code from that bank. */
-/*		For ex., since we are running from ROM on bank 0, we can NOT */
-/*		execute the code that modifies bank 0 timings from ROM, so */
-/*		we run it from cache. */
-/*	Bank 0 - Flash and SRAM */
-/*	Bank 1 - NVRAM/RTC */
-/*	Bank 2 - Keyboard/Mouse controller */
-/*	Bank 3 - IR controller */
-/*	Bank 4 - not used */
-/*	Bank 5 - not used */
-/*	Bank 6 - not used */
-/*	Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-	.globl	ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	mflr    r4                      /* save link register */
-	bl      ..getAddr
-..getAddr:
-	mflr    r3                      /* get address of ..getAddr */
-	mtlr    r4                      /* restore link register */
-	addi    r4,0,14                 /* set ctr to 10; used to prefetch */
-	mtctr   r4                      /* 10 cache lines to fit this function */
-					/* in cache (gives us 8x10=80 instrctns) */
-..ebcloop:
-	icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-	addi    r3,r3,32		/* move to next cache line */
-	bdnz    ..ebcloop               /* continue for 10 cache lines */
-
-	/*------------------------------------------------------------------- */
-	/* Delay to ensure all accesses to ROM are complete before changing */
-	/* bank 0 timings. 200usec should be enough. */
-	/*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
-	/*------------------------------------------------------------------- */
-	addis	r3,0,0x0
-	ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
-	mtctr   r3
-..spinlp:
-	bdnz    ..spinlp                /* spin loop */
-
-	/*----------------------------------------------------------------------- */
-	/* Memory Bank 0 (Flash and SRAM) initialization */
-	/*----------------------------------------------------------------------- */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,0x9B01
-	ori     r4,r4,0x5480
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	addis   r4,0,0xFFF1           /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
-	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
-	mtdcr   ebccfgd,r4
-
-	blr
-
-
-/*----------------------------------------------------------------------------- */
-/* Function:     sdram_init */
-/* Description:  Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
-	.globl  sdram_init
-sdram_init:
-	blr
diff --git a/board/walnut405/u-boot.lds.debug b/board/walnut405/u-boot.lds.debug
deleted file mode 100644
index d483424ad6..0000000000
--- a/board/walnut405/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/walnut405/walnut405.c b/board/walnut405/walnut405.c
deleted file mode 100644
index 7035599e90..0000000000
--- a/board/walnut405/walnut405.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "walnut405.h"
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-int board_early_init_f (void)
-{
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the Walnut board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-   |       IRQ 27 (EXT IRQ 2) Not Used
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for Walnut board:
-   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-   |       interrupt. The FPGA must be read to determine which device
-   |       caused the interrupt. The default setting of the FPGA clears
-   |
-   +-------------------------------------------------------------------------*/
-
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (uicer, 0x00000000);	/* disable all ints */
-	mtdcr (uiccr, 0x00000020);	/* set all but FPGA SMI to be non-critical */
-	mtdcr (uicpr, 0xFFFFFFE0);	/* set int polarities */
-	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-	/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb1ap, 0x02815480);
-	mtebc (pb1cr, 0xF0018000);
-
-	/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb2ap, 0x04815A80);
-	mtebc (pb2cr, 0xF0118000);
-
-	/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb3ap, 0x01815280);
-	mtebc (pb3cr, 0xF0218000);
-
-	/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb7ap, 0x01815280);
-	mtebc (pb7cr, 0xF0318000);
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *) (FPGA_BRDC) |= 0x1;
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	unsigned char *s = getenv ("serial#");
-	unsigned char *e;
-
-	puts ("Board: ");
-
-	if (!s || strncmp (s, "WALNUT405", 9)) {
-		puts ("### No HW ID - assuming WALNUT405");
-	} else {
-		for (e = s; *e; ++e) {
-			if (*e == ' ')
-				break;
-		}
-		for (; s < e; ++s) {
-			putc (*s);
-		}
-	}
-	putc ('\n');
-
-	return (0);
-}
-
-
-/* -------------------------------------------------------------------------
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-   ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
-	return  spd_sdram (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/walnut405/walnut405.h b/board/walnut405/walnut405.h
deleted file mode 100644
index 5fc313a258..0000000000
--- a/board/walnut405/walnut405.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index c118f06de9..4914ac5a16 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -61,13 +61,15 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #endif
 	print_num ("bootflags",	    bd->bi_bootflags	);
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-    defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300)
+    defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
+    defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	print_str ("procfreq",	    strmhz(buf, bd->bi_procfreq));
 	print_str ("plb_busfreq",   strmhz(buf, bd->bi_plb_busfreq));
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
+    defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	print_str ("pci_busfreq",   strmhz(buf, bd->bi_pci_busfreq));
 #endif
-#else	/* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300 */
+#else	/* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
 #if defined(CONFIG_CPM2)
 	print_str ("vco",	    strmhz(buf, bd->bi_vco));
 	print_str ("sccfreq",	    strmhz(buf, bd->bi_sccfreq));
@@ -78,7 +80,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_str ("cpmfreq",	    strmhz(buf, bd->bi_cpmfreq));
 #endif
 	print_str ("busfreq",	    strmhz(buf, bd->bi_busfreq));
-#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300 */
+#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
 #if defined(CONFIG_MPC8220)
 	print_str ("inpfreq",	    strmhz(buf, bd->bi_inpfreq));
 	print_str ("flbfreq",	    strmhz(buf, bd->bi_flbfreq));
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 37286e86a8..eccf2e9e7b 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -78,7 +78,7 @@ int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
  * ====================================================================== */
 int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#if defined(CONFIG_WALNUT405)	|| \
+#if defined(CONFIG_WALNUT)	|| \
     defined(CFG_VXWORKS_MAC_PTR)
 	DECLARE_GLOBAL_DATA_PTR;
 #endif
@@ -121,7 +121,7 @@ int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 * This will vary from board to board
 	 */
 
-#if defined(CONFIG_WALNUT405)
+#if defined(CONFIG_WALNUT)
 	tmp = (char *) CFG_NVRAM_BASE_ADDR + 0x500;
 	memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[3], 3);
 #elif defined(CFG_VXWORKS_MAC_PTR)
diff --git a/common/lynxkdi.c b/common/lynxkdi.c
index 14aa175b18..19f0620c93 100644
--- a/common/lynxkdi.c
+++ b/common/lynxkdi.c
@@ -20,7 +20,7 @@
 #if defined(CONFIG_LYNXKDI)
 #include <lynxkdi.h>
 
-#if defined(CONFIG_MPC8260)
+#if defined(CONFIG_MPC8260) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 void lynxkdi_boot ( image_header_t *hdr )
 {
 	void (*lynxkdi)(void) = (void(*)(void))hdr->ih_ep;
diff --git a/common/usb.c b/common/usb.c
index 811ed24e48..03eccf8b3d 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -46,7 +46,6 @@
 #include <405gp_pci.h>
 #endif
 
-
 #undef USB_DEBUG
 
 #ifdef	USB_DEBUG
@@ -523,6 +522,7 @@ int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char
 		if (result > 0)
 			break;
 	}
+
 	return result;
 }
 
@@ -723,6 +723,7 @@ int usb_new_device(struct usb_device *dev)
 
 	/* find the port number we're at */
 	if (parent) {
+
 		for (j = 0; j < parent->maxchild; j++) {
 			if (parent->children[j] == dev) {
 				port = j;
@@ -956,6 +957,7 @@ static int hub_port_reset(struct usb_device *dev, int port,
 			return -1;
 
 		if (portstatus & USB_PORT_STAT_ENABLE) {
+
 			break;
 		}
 
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index eb80b1cb56..b4cc74476b 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -53,6 +53,7 @@
 #define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #undef OHCI_VERBOSE_DEBUG	/* not always helpful */
 
+
 /* For initializing controller (mask in an HCFS mode too) */
 #define	OHCI_CONTROL_INIT \
 	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
@@ -1219,7 +1220,6 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 	return stat;
 }
 
-
 /*-------------------------------------------------------------------------*/
 
 /* common code for handling submit messages - used for all but root hub */
diff --git a/cpu/ppc4xx/405gp_enet.c b/cpu/ppc4xx/405gp_enet.c
index 9d8e2b6ded..9c17e31bd4 100644
--- a/cpu/ppc4xx/405gp_enet.c
+++ b/cpu/ppc4xx/405gp_enet.c
@@ -227,7 +227,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	 /* wait for reset */
 	 while (mfdcr (malmcr) & MAL_CR_MMSR) {
 	 };
-#if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	out32 (ZMII_FER, 0);
+	udelay(100);
+	/* set RII mode */
+	out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
+#elif defined(CONFIG_440)
 	 /* set RMII mode */
 	 out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
 #endif /* CONFIG_440 */
@@ -461,6 +466,18 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
 	else
 		out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	mfsdr(sdr_mfr, reg);
+	/* set speed */
+	if (speed == _100BASET) {
+		out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
+		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
+	} else {
+		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
+		out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
+	}
+	mtsdr(sdr_mfr, reg);
+#endif
 #endif
 
 	/* Enable broadcast and indvidual address */
@@ -498,11 +515,6 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		/*
 		 * Connect interrupt service routines
 		 */
-#if !defined(CONFIG_405EP)
-		/* 405EP has one EWU interrupt */
-		irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2),
-				     (interrupt_handler_t *) enetInt, dev);
-#endif
 		irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
 				     (interrupt_handler_t *) enetInt, dev);
 	}
@@ -993,12 +1005,6 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 			mtdcr (malrxdeir, 0xffffffff);	/* clear pending interrupts */
 			mtdcr (malier, mal_ier);
 
-#if defined(CONFIG_405EP)
-			/* 405EP has one EWU interrupt */
-			irq_install_handler (VECNUM_EWU0,
-					     (interrupt_handler_t *) enetInt,
-					     dev);
-#endif
 			/* install MAL interrupt handler */
 			irq_install_handler (VECNUM_MS,
 					     (interrupt_handler_t *) enetInt,
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 4f1754ade3..ebbcfd573a 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -437,7 +437,7 @@ void pci_440_init (struct pci_controller *hose)
 	 * The PCI initialization sequence enable bit must be set ... if not abort
 	 * pci setup since updating the bit requires chip reset.
 	 *--------------------------------------------------------------------------*/
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440_GX) || defined (CONFIG_440_EP) || defined(CONFIG_440_GR)
 	mfsdr(sdr_sdstp1,strap);
 	if ( (strap & 0x00010000) == 0 ){
 		printf("PCI: SDR0_STRP1[PISE] not set.\n");
@@ -498,7 +498,7 @@ void pci_440_init (struct pci_controller *hose)
 #if defined(CONFIG_440_GX)
 	out32r( PCIX0_BRDGOPT1, 0x04000060 );               /* PLB Rq pri highest   */
 	out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1  */
-#else
+#elif defined(PCIX0_BRDGOPT1)
 	out32r( PCIX0_BRDGOPT1, 0x10000060 );               /* PLB Rq pri highest   */
 	out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config   */
 #endif
@@ -531,7 +531,9 @@ void pci_440_init (struct pci_controller *hose)
 #ifdef CONFIG_PCI_SCAN_SHOW
 	printf("PCI:   Bus Dev VenId DevId Class Int\n");
 #endif
+#if !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
 	out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
+#endif
 	hose->last_busno = pci_hose_scan(hose);
     }
 }
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index 871f83b96e..24e6ef3573 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -167,6 +167,8 @@ static void ppc_440x_eth_halt (struct eth_device *dev)
 	/* EMAC RESET */
 	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
 
+	hw_p->print_speed = 1;	/* print speed message again next time */
+
 	return;
 }
 
@@ -277,7 +279,9 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	unsigned short devnum;
 	unsigned short reg_short;
 	sys_info_t sysinfo;
+#if defined(CONFIG_440_GX)
 	int ethgroup;
+#endif
 
 	EMAC_440GX_HW_PST hw_p = dev->priv;
 
@@ -289,7 +293,6 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	/* Need to get the OPB frequency so we can access the PHY */
 	get_sys_info (&sysinfo);
 
-
 	msr = mfmsr ();
 	mtmsr (msr & ~(MSR_EE));	/* disable interrupts */
 
@@ -320,7 +323,12 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	/* MAL Channel RESET */
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
+#else
 	mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
+#endif
+
 	mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
 
 	/* wait for reset */
@@ -354,7 +362,9 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	out32 (ZMII_FER, 0);
 	udelay (100);
 
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+   	out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+#elif defined(CONFIG_440_GX)
 	ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
 #else
 	if ((devnum == 0) || (devnum == 1)) {
@@ -499,6 +509,15 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 			(int) speed, (duplex == HALF) ? "HALF" : "FULL");
 	}
 
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	mfsdr(sdr_mfr, reg);
+	if (speed == 100) {
+		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
+	} else {
+		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
+	}
+	mtsdr(sdr_mfr, reg);
+#endif
 	/* Set ZMII/RGMII speed according to the phy link speed */
 	reg = in32 (ZMII_SSR);
 	if ( (speed == 100) || (speed == 1000) )
@@ -618,8 +637,12 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	switch (devnum) {
 	case 1:
 		/* setup MAL tx & rx channel pointers */
-		mtdcr (maltxbattr, 0x0);
+#if defined (CONFIG_440_EP) || defined (CONFIG_440_GR)
+		mtdcr (maltxctp2r, hw_p->tx);
+#else
 		mtdcr (maltxctp1r, hw_p->tx);
+#endif
+		mtdcr (maltxbattr, 0x0);
 		mtdcr (malrxbattr, 0x0);
 		mtdcr (malrxctp1r, hw_p->rx);
 		/* set RX buffer size */
@@ -658,7 +681,11 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
 	}
 
 	/* Enable MAL transmit and receive channels */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
+#else
 	mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+#endif
 	mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
 
 	/* set transmit enable & receive enable */
@@ -1148,19 +1175,24 @@ static int ppc_440x_eth_rx (struct eth_device *dev)
 int ppc_440x_eth_initialize (bd_t * bis)
 {
 	static int virgin = 0;
-	unsigned long pfc1;
 	struct eth_device *dev;
 	int eth_num = 0;
-
 	EMAC_440GX_HW_PST hw = NULL;
 
+#if defined(CONFIG_440_GX)
+	unsigned long pfc1;
+
 	mfsdr (sdr_pfc1, pfc1);
 	pfc1 &= ~(0x01e00000);
 	pfc1 |= 0x01200000;
 	mtsdr (sdr_pfc1, pfc1);
+#endif
 	/* set phy num and mode */
 	bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+#if defined(CONFIG_PHY1_ADDR)
 	bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+#endif
+#if defined(CONFIG_440_GX)
 	bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
 	bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
 	bis->bi_phymode[0] = 0;
@@ -1171,6 +1203,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
 #if defined (CONFIG_440_GX)
 	ppc_440x_eth_setup_bridge(0, bis);
 #endif
+#endif
 
 	for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
 
@@ -1256,6 +1289,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
 		}
 
 		hw->devnum = eth_num;
+		hw->print_speed = 1;
 
 		sprintf (dev->name, "ppc_440x_eth%d", eth_num);
 		dev->priv = (void *) hw;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index a841109e8d..5b16754c50 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -31,7 +31,7 @@ COBJS	= 405gp_enet.o 405gp_pci.o 440gx_enet.o \
 	  bedbug_405.o commproc.o \
 	  cpu.o cpu_init.o i2c.o interrupts.o \
 	  miiphy.o miiphy_440.o sdram.o serial.o \
-	  spd_sdram.o speed.o traps.o
+	  spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o
 
 OBJS	= $(AOBJS) $(COBJS)
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 06acb8162e..ae45a23d03 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -71,17 +71,17 @@ int checkcpu (void)
 	get_sys_info(&sys_info);
 
 #ifdef CONFIG_405GP
-	puts ("IBM PowerPC 405GP");
+	puts ("AMCC PowerPC 405GP");
 	if (pvr == PVR_405GPR_RB) {
 		putc('r');
 	}
 	puts (" Rev. ");
 #endif
 #ifdef CONFIG_405CR
-	puts ("IBM PowerPC 405CR Rev. ");
+	puts ("AMCC PowerPC 405CR Rev. ");
 #endif
 #ifdef CONFIG_405EP
-	puts ("IBM PowerPC 405EP Rev. ");
+	puts ("AMCC PowerPC 405EP Rev. ");
 #endif
 	switch (pvr) {
 	case PVR_405GP_RB:
@@ -152,10 +152,10 @@ int checkcpu (void)
 #endif
 
 #if defined(CONFIG_440)
-	puts ("IBM PowerPC 440 G");
+	puts ("AMCC PowerPC 440 ");
 	switch(pvr) {
 	case PVR_440GP_RB:
-		puts("P Rev. B");
+		puts("GP Rev. B");
 		/* See errata 1.12: CHIP_4 */
 		if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) ||
 		    (mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){
@@ -167,19 +167,35 @@ int checkcpu (void)
 		}
 		break;
 	case PVR_440GP_RC:
-		puts("P Rev. C");
+		puts("GP Rev. C");
 		break;
 	case PVR_440GX_RA:
-		puts("X Rev. A");
+		puts("GX Rev. A");
 		break;
 	case PVR_440GX_RB:
-		puts("X Rev. B");
+		puts("GX Rev. B");
 		break;
 	case PVR_440GX_RC:
-		puts("X Rev. C");
+		puts("GX Rev. C");
 		break;
+#if defined(CONFIG_440_GR)
+	case PVR_440EP_RA:
+		puts("GR Rev. A");
+		break;
+	case PVR_440EP_RB:
+		puts("GR Rev. B");
+		break;
+#else
+	case PVR_440EP_RA:
+		puts("EP Rev. A");
+		break;
+	case PVR_440EP_RB:
+		puts("EP Rev. B");
+		break;
+#endif
+
 	default:
-		printf (" UNKNOWN (PVR=%08x)", pvr);
+		printf ("UNKNOWN (PVR=%08x)", pvr);
 		break;
 	}
 #endif
@@ -193,6 +209,12 @@ int checkcpu (void)
 
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
+#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
+	/*give reset to BCSR*/
+	*(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
+
+#else
+
 	/*
 	 * Initiate system reset in debug control register DBCR
 	 */
@@ -202,6 +224,8 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #else
 	__asm__ __volatile__("mtspr 0x3f2, 3");
 #endif
+
+#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
 	return 1;
 }
 
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 25508e7505..74f013520b 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -188,7 +188,11 @@ cpu_init_f (void)
 	unsigned long val;
 
 	val = mfspr(tcr);
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	val |= 0xb8000000;      /* generate system reset after 1.34 seconds */
+#else
 	val |= 0xf0000000;      /* generate system reset after 2.684 seconds */
+#endif
 	mtspr(tcr, val);
 
 	val = mfspr(tsr);
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 90899dd1e5..c0e51f9293 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -430,7 +430,10 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
 #endif /* CONFIG_440_GX */
 #endif /* CONFIG_440 */
 
-	if (irqa[i].handler != NULL) {
+	/*
+	 * print warning when replacing with a different irq vector
+	 */
+	if ((irqa[i].handler != NULL) && (irqa[i].handler != handler)) {
 		printf ("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
 			vec, (uint) handler, (uint) irqa[i].handler);
 	}
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 4abd3fc493..92f8ddb2ed 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -269,9 +269,14 @@ int serial_tstc ()
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
 
 #if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000400
+#else
 #define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000200
 #define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000300
-#if defined(CONFIG_440_GX)
+#endif
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 #define CR0_MASK        0xdfffffff
 #define CR0_EXTCLK_ENA  0x00800000
 #define CR0_UDIV_POS    0
@@ -301,14 +306,14 @@ int serial_tstc ()
 #if defined(CONFIG_UART1_CONSOLE)
 #define ACTING_UART0_BASE	UART1_BASE
 #define ACTING_UART1_BASE	UART0_BASE
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 #define UART0_SDR           sdr_uart1
 #define UART1_SDR           sdr_uart0
 #endif /* CONFIG_440_GX */
 #else
 #define ACTING_UART0_BASE	UART0_BASE
 #define ACTING_UART1_BASE	UART1_BASE
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 #define UART0_SDR           sdr_uart0
 #define UART1_SDR           sdr_uart1
 #endif /* CONFIG_440_GX */
@@ -460,7 +465,7 @@ int serial_init(void)
 	serial_divs (gd->baudrate, &udiv, &bdiv);
 #endif
 
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	reg |= udiv << CR0_UDIV_POS;	/* set the UART divisor */
 #if defined(CONFIG_SERIAL_MULTI)
 	if (UART0_BASE == dev_base) {
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index 794a72c8b5..520107a8f9 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -16,6 +16,9 @@
  * Jun Gu, Artesyn Technology, jung@artesyncp.com
  * Support for IBM 440 based on OpenBIOS draminit.c from IBM.
  *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -53,7 +56,9 @@
 #define	CFG_I2C_SLAVE	0xFE
 #endif
 
-#ifndef  CONFIG_440              /* for 405 WALNUT board */
+#define ONE_BILLION         1000000000
+
+#ifndef  CONFIG_440              /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
 
 #define  SDRAM0_CFG_DCE          0x80000000
 #define  SDRAM0_CFG_SRE          0x40000000
@@ -111,7 +116,7 @@ int spd_read(uint addr);
 
 long int spd_sdram(int(read_spd)(uint addr))
 {
-	int bus_period,tmp,row,col;
+	int tmp,row,col;
 	int total_size,bank_size,bank_code;
 	int ecc_on;
 	int mode;
@@ -141,226 +146,189 @@ long int spd_sdram(int(read_spd)(uint addr))
 	int t_rc;
 	int min_cas;
 
-	if(read_spd == 0){
-		read_spd=spd_read;
-	/*
-	 * Make sure I2C controller is initialized
-	 * before continuing.
-	 */
-		i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	}
-
+	PPC405_SYS_INFO sys_info;
+	unsigned long bus_period_x_10;
 
 	/*
-	 * Calculate the bus period, we do it this
-	 * way to minimize stack utilization.
+	 * get the board info
 	 */
-#ifndef CONFIG_405EP
-	tmp = (mfdcr(pllmd) >> (31-6)) & 0xf;	/* get FBDV bits */
-	tmp = CONFIG_SYS_CLK_FREQ * tmp;	/* get plb freq */
-#else
-	{
-		unsigned long freqCPU;
-		unsigned long pllmr0;
-		unsigned long pllmr1;
-		unsigned long pllFbkDiv;
-		unsigned long pllPlbDiv;
-		unsigned long pllmr0_ccdv;
-
-		/*
-		 * Read PLL Mode registers
-		 */
-		pllmr0 = mfdcr (cpc0_pllmr0);
-		pllmr1 = mfdcr (cpc0_pllmr1);
-
-		pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
-		if (pllFbkDiv == 0) {
-			pllFbkDiv = 16;
-		}
-		pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
-		/*
-		 * Determine CPU clock frequency
-		 */
-		pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
-		if (pllmr1 & PLLMR1_SSCS_MASK) {
-			freqCPU = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / pllmr0_ccdv;
-		} else {
-			freqCPU = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
-		}
+	get_sys_info(&sys_info);
+	bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
 
+	if (read_spd == 0){
+		read_spd=spd_read;
 		/*
-		 * Determine PLB clock frequency
+		 * Make sure I2C controller is initialized
+		 * before continuing.
 		 */
-		tmp = freqCPU / pllPlbDiv;
+		i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
 	}
-#endif
-	bus_period = sdram_HZ_to_ns(tmp);	/* get sdram speed */
 
 	/* Make shure we are using SDRAM */
-	if (read_spd(2) != 0x04){
-	  SPD_ERR("SDRAM - non SDRAM memory module found\n");
-	  }
-
-/*------------------------------------------------------------------
-  configure memory timing register
+	if (read_spd(2) != 0x04) {
+		SPD_ERR("SDRAM - non SDRAM memory module found\n");
+	}
 
-  data from DIMM:
-  27	IN Row Precharge Time ( t RP)
-  29	MIN RAS to CAS Delay ( t RCD)
-  127   Component and Clock Detail ,clk0-clk3, junction temp, CAS
-  -------------------------------------------------------------------*/
+	/* ------------------------------------------------------------------
+	 * configure memory timing register
+	 *
+	 * data from DIMM:
+	 * 27	IN Row Precharge Time ( t RP)
+	 * 29	MIN RAS to CAS Delay ( t RCD)
+	 * 127   Component and Clock Detail ,clk0-clk3, junction temp, CAS
+	 * -------------------------------------------------------------------*/
 
-     /*
-      * first figure out which cas latency mode to use
-      * use the min supported mode
-      */
+	/*
+	 * first figure out which cas latency mode to use
+	 * use the min supported mode
+	 */
 
 	tmp = read_spd(127) & 0x6;
-     if(tmp == 0x02){      	   /* only cas = 2 supported */
-	  min_cas = 2;
+	if (tmp == 0x02){      	   /* only cas = 2 supported */
+		min_cas = 2;
 /*     	  t_ck = read_spd(9); */
 /*     	  t_ac = read_spd(10); */
-	  }
-     else if (tmp == 0x04){         /* only cas = 3 supported */
-	  min_cas = 3;
+	} else if (tmp == 0x04) {         /* only cas = 3 supported */
+		min_cas = 3;
 /*     	  t_ck = read_spd(9); */
 /*     	  t_ac = read_spd(10); */
-	  }
-     else if (tmp == 0x06){         /* 2,3 supported, so use 2 */
-	  min_cas = 2;
+	} else if (tmp == 0x06) {         /* 2,3 supported, so use 2 */
+		min_cas = 2;
 /*     	  t_ck = read_spd(23); */
 /*     	  t_ac = read_spd(24); */
-	  }
-     else {
-	     SPD_ERR("SDRAM - unsupported CAS latency \n");
+	} else {
+		SPD_ERR("SDRAM - unsupported CAS latency \n");
 	}
 
-     /* get some timing values, t_rp,t_rcd,t_ras,t_rc
-     */
-     t_rp = read_spd(27);
-     t_rcd = read_spd(29);
-     t_ras = read_spd(30);
-     t_rc = t_ras + t_rp;
-
-     /* The following timing calcs subtract 1 before deviding.
-      * this has effect of using ceiling instead of floor rounding,
-      * and also subtracting 1 to convert number to reg value
-      */
-     /* set up CASL */
-     sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
-     /* set up PTA */
-     sdram0_tr |= (((t_rp - 1)/bus_period) & 0x3) << SDRAM0_TR_PTA_SHIFT;
-     /* set up CTP */
-     tmp = ((t_rc - t_rcd - t_rp -1) / bus_period) & 0x3;
-     if(tmp<1) tmp=1;
-     sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
-     /* set LDF	= 2 cycles, reg value = 1 */
-     sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
-     /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
-	tmp = ( (t_rc - 1) / bus_period)-3;
-	if(tmp<0)tmp=0;
-	if(tmp>6)tmp=6;
+	/* get some timing values, t_rp,t_rcd,t_ras,t_rc
+	 */
+	t_rp = read_spd(27);
+	t_rcd = read_spd(29);
+	t_ras = read_spd(30);
+	t_rc = t_ras + t_rp;
+
+	/* The following timing calcs subtract 1 before deviding.
+	 * this has effect of using ceiling instead of floor rounding,
+	 * and also subtracting 1 to convert number to reg value
+	 */
+	/* set up CASL */
+	sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+	/* set up PTA */
+	sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+	/* set up CTP */
+	tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+	if (tmp < 1)
+		tmp = 1;
+	sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+	/* set LDF	= 2 cycles, reg value = 1 */
+	sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+	/* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+	tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+	if (tmp < 0)
+		tmp = 0;
+	if (tmp > 6)
+		tmp = 6;
 	sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
-     /* set RCD = t_rcd/bus_period*/
-     sdram0_tr |= (((t_rcd - 1) / bus_period) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+	/* set RCD = t_rcd/bus_period*/
+	sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
 
 
-/*------------------------------------------------------------------
-  configure RTR register
-  -------------------------------------------------------------------*/
-     row = read_spd(3);
-     col = read_spd(4);
-     tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
-     switch(tmp){
+	/*------------------------------------------------------------------
+	 * configure RTR register
+	 * -------------------------------------------------------------------*/
+	row = read_spd(3);
+	col = read_spd(4);
+	tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+	switch (tmp) {
 	case 0x00:
-	  tmp=15625;
-	  break;
+		tmp = 15625;
+		break;
 	case 0x01:
-	  tmp=15625/4;
-	  break;
+		tmp = 15625 / 4;
+		break;
 	case 0x02:
-	  tmp=15625/2;
-	  break;
+		tmp = 15625 / 2;
+		break;
 	case 0x03:
-	  tmp=15625*2;
-	  break;
+		tmp = 15625 * 2;
+		break;
 	case 0x04:
-	  tmp=15625*4;
-	  break;
+		tmp = 15625 * 4;
+		break;
 	case 0x05:
-	  tmp=15625*8;
-	  break;
+		tmp = 15625 * 8;
+		break;
 	default:
-	  SPD_ERR("SDRAM - Bad refresh period \n");
+		SPD_ERR("SDRAM - Bad refresh period \n");
 	}
 	/* convert from nsec to bus cycles */
-	tmp = tmp/bus_period;
-	sdram0_rtr = (tmp & 0x3ff8)<<  SDRAM0_RTR_SHIFT;
+	tmp = (tmp * 10) / bus_period_x_10;
+	sdram0_rtr = (tmp & 0x3ff8) <<  SDRAM0_RTR_SHIFT;
 
-/*------------------------------------------------------------------
-  determine the number of banks used
-  -------------------------------------------------------------------*/
+	/*------------------------------------------------------------------
+	 * determine the number of banks used
+	 * -------------------------------------------------------------------*/
 	/* byte 7:6 is module data width */
-	if(read_spd(7) != 0)
-	    SPD_ERR("SDRAM - unsupported module width\n");
+	if (read_spd(7) != 0)
+		SPD_ERR("SDRAM - unsupported module width\n");
 	tmp = read_spd(6);
 	if (tmp < 32)
-	    SPD_ERR("SDRAM - unsupported module width\n");
+		SPD_ERR("SDRAM - unsupported module width\n");
 	else if (tmp < 64)
-	    bank_cnt=1;		/* one bank per sdram side */
+		bank_cnt = 1;		/* one bank per sdram side */
 	else if (tmp < 73)
-	    bank_cnt=2;	/* need two banks per side */
+		bank_cnt = 2;	/* need two banks per side */
 	else if (tmp < 161)
-	    bank_cnt=4;	/* need four banks per side */
+		bank_cnt = 4;	/* need four banks per side */
 	else
-	    SPD_ERR("SDRAM - unsupported module width\n");
+		SPD_ERR("SDRAM - unsupported module width\n");
 
 	/* byte 5 is the module row count (refered to as dimm "sides") */
 	tmp = read_spd(5);
-	if(tmp==1);
-	else if(tmp==2) bank_cnt *=2;
-	else if(tmp==4) bank_cnt *=4;
-	else bank_cnt = 8; 		/* 8 is an error code */
+	if (tmp == 1)
+		;
+	else if (tmp==2)
+		bank_cnt *= 2;
+	else if (tmp==4)
+		bank_cnt *= 4;
+	else
+		bank_cnt = 8; 		/* 8 is an error code */
 
-	if(bank_cnt > 4)	/* we only have 4 banks to work with */
-	    SPD_ERR("SDRAM - unsupported module rows for this width\n");
+	if (bank_cnt > 4)	/* we only have 4 banks to work with */
+		SPD_ERR("SDRAM - unsupported module rows for this width\n");
 
 	/* now check for ECC ability of module. We only support ECC
 	 *   on 32 bit wide devices with 8 bit ECC.
 	 */
-	if ( (read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8) ){
-	   sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT;
-	   ecc_on = 1;
-	}
-	else{
-	   sdram0_ecccfg=0;
-	   ecc_on = 0;
+	if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+		sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+		ecc_on = 1;
+	} else {
+		sdram0_ecccfg = 0;
+		ecc_on = 0;
 	}
 
-/*------------------------------------------------------------------
-	calculate total size
-  -------------------------------------------------------------------*/
+	/*------------------------------------------------------------------
+	 * calculate total size
+	 * -------------------------------------------------------------------*/
 	/* calculate total size and do sanity check */
 	tmp = read_spd(31);
-	total_size=1<<22;	/* total_size = 4MB */
+	total_size = 1 << 22;	/* total_size = 4MB */
 	/* now multiply 4M by the smallest device row density */
 	/* note that we don't support asymetric rows */
-	while (((tmp & 0x0001) == 0) && (tmp != 0)){
-	    total_size= total_size<<1;
-	    tmp = tmp>>1;
-	    }
+	while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+		total_size = total_size << 1;
+		tmp = tmp >> 1;
+	}
 	total_size *= read_spd(5);	/* mult by module rows (dimm sides) */
 
-/*------------------------------------------------------------------
-	map  rows * cols * banks to a mode
- -------------------------------------------------------------------*/
+	/*------------------------------------------------------------------
+	 * map  rows * cols * banks to a mode
+	 * -------------------------------------------------------------------*/
 
-	switch( row )
-	{
+	switch (row) {
 	case 11:
-		switch ( col )
-		{
+		switch (col) {
 		case 8:
 			mode=4; /* mode 5 */
 			break;
@@ -369,12 +337,11 @@ long int spd_sdram(int(read_spd)(uint addr))
 			mode=0; /* mode 1 */
 			break;
 		default:
-		SPD_ERR("SDRAM - unsupported mode\n");
+			SPD_ERR("SDRAM - unsupported mode\n");
 		}
 		break;
 	case 12:
-		switch ( col )
-		{
+		switch (col) {
 		case 8:
 			mode=3; /* mode 4 */
 			break;
@@ -383,37 +350,36 @@ long int spd_sdram(int(read_spd)(uint addr))
 			mode=1; /* mode 2 */
 			break;
 		default:
-		SPD_ERR("SDRAM - unsupported mode\n");
+			SPD_ERR("SDRAM - unsupported mode\n");
 		}
 		break;
 	case 13:
-		switch ( col )
-		{
+		switch (col) {
 		case 8:
 			mode=5; /* mode 6 */
 			break;
 		case 9:
 		case 10:
-			if (read_spd(17) ==2 )
-				mode=6; /* mode 7 */
+			if (read_spd(17) == 2)
+				mode = 6; /* mode 7 */
 			else
-				mode=2; /* mode 3 */
+				mode = 2; /* mode 3 */
 			break;
 		case 11:
-			mode=2; /* mode 3 */
+			mode = 2; /* mode 3 */
 			break;
 		default:
-		SPD_ERR("SDRAM - unsupported mode\n");
+			SPD_ERR("SDRAM - unsupported mode\n");
 		}
 		break;
 	default:
-	     SPD_ERR("SDRAM - unsupported mode\n");
+		SPD_ERR("SDRAM - unsupported mode\n");
 	}
 
-/*------------------------------------------------------------------
-	using the calculated values, compute the bank
-	config register values.
- -------------------------------------------------------------------*/
+	/*------------------------------------------------------------------
+	 * using the calculated values, compute the bank
+	 * config register values.
+	 * -------------------------------------------------------------------*/
 	sdram0_b1cr = 0;
 	sdram0_b2cr = 0;
 	sdram0_b3cr = 0;
@@ -421,44 +387,46 @@ long int spd_sdram(int(read_spd)(uint addr))
 	/* compute the size of each bank */
 	bank_size = total_size / bank_cnt;
 	/* convert bank size to bank size code for ppc4xx
-		by takeing log2(bank_size) - 22 */
-	tmp=bank_size; 		/* start with tmp = bank_size */
-	bank_code=0;			/* and bank_code = 0 */
-	while (tmp>1){ 		/* this takes log2 of tmp */
+	   by takeing log2(bank_size) - 22 */
+	tmp = bank_size; 		/* start with tmp = bank_size */
+	bank_code = 0;			/* and bank_code = 0 */
+	while (tmp > 1) { 		/* this takes log2 of tmp */
 		bank_code++;		/* and stores result in bank_code */
-		tmp=tmp>>1;
-		}				/* bank_code is now log2(bank_size) */
-	bank_code-=22;				/* subtract 22 to get the code */
+		tmp = tmp >> 1;
+	}				/* bank_code is now log2(bank_size) */
+	bank_code -= 22;		/* subtract 22 to get the code */
 
 	tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
-	sdram0_b0cr = (bank_size) * 0 | tmp;
+	sdram0_b0cr = (bank_size * 0) | tmp;
 #ifndef CONFIG_405EP /* not on PPC405EP */
-	if(bank_cnt>1) sdram0_b2cr = (bank_size) * 1 | tmp;
-	if(bank_cnt>2) sdram0_b1cr = (bank_size) * 2 | tmp;
-	if(bank_cnt>3) sdram0_b3cr = (bank_size) * 3 | tmp;
+	if (bank_cnt > 1)
+		sdram0_b2cr = (bank_size * 1) | tmp;
+	if (bank_cnt > 2)
+		sdram0_b1cr = (bank_size * 2) | tmp;
+	if (bank_cnt > 3)
+		sdram0_b3cr = (bank_size * 3) | tmp;
 #else
 	/* PPC405EP chip only supports two SDRAM banks */
-	if(bank_cnt>1) sdram0_b1cr = (bank_size) * 1 | tmp;
-	if(bank_cnt>2) total_size -= (bank_size) * (bank_cnt - 2);
+	if (bank_cnt > 1)
+		sdram0_b1cr = (bank_size * 1) | tmp;
+	if (bank_cnt > 2)
+		total_size = 2 * bank_size;
 #endif
 
-
 	/*
 	 *   enable sdram controller DCE=1
 	 *  enable burst read prefetch to 32 bytes BRPF=2
 	 *  leave other functions off
 	 */
 
-/*------------------------------------------------------------------
-	now that we've done our calculations, we are ready to
-	program all the registers.
- -------------------------------------------------------------------*/
-
+	/*------------------------------------------------------------------
+	 * now that we've done our calculations, we are ready to
+	 * program all the registers.
+	 * -------------------------------------------------------------------*/
 
 #define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
 	/* disable memcontroller so updates work */
-	sdram0_cfg = 0;
-	mtsdram0( mem_mcopt1, sdram0_cfg );
+	mtsdram0( mem_mcopt1, 0 );
 
 #ifndef CONFIG_405EP /* not on PPC405EP */
 	mtsdram0( mem_besra , sdram0_besr0 );
@@ -479,15 +447,10 @@ long int spd_sdram(int(read_spd)(uint addr))
 	/* SDRAM have a power on delay,  500 micro should do */
 	udelay(500);
 	sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
-	if(ecc_on) sdram0_cfg |= SDRAM0_CFG_MEMCHK;
-	mtsdram0( mem_mcopt1, sdram0_cfg );
-
+	if (ecc_on)
+		sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+	mtsdram0(mem_mcopt1, sdram0_cfg);
 
-	/* kernel 2.4.2 from mvista has a bug with memory over 128MB */
-#ifdef MVISTA_MEM_BUG
-	if (total_size > 128*1024*1024 )
-		total_size=128*1024*1024;
-#endif
 	return (total_size);
 }
 
@@ -504,8 +467,8 @@ int spd_read(uint addr)
 #else                             /* CONFIG_440 */
 
 /*-----------------------------------------------------------------------------
-|  Memory Controller Options 0
-+-----------------------------------------------------------------------------*/
+  |  Memory Controller Options 0
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_CFG0_DCEN           0x80000000  /* SDRAM Controller Enable      */
 #define SDRAM_CFG0_MCHK_MASK      0x30000000  /* Memory data errchecking mask */
 #define SDRAM_CFG0_MCHK_NON       0x00000000  /* No ECC generation            */
@@ -520,39 +483,39 @@ int spd_read(uint addr)
 #define SDRAM_CFG0_PDP            0x00200000  /* Page deallocation policy     */
 
 /*-----------------------------------------------------------------------------
-|  Memory Controller Options 1
-+-----------------------------------------------------------------------------*/
+  |  Memory Controller Options 1
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_CFG1_SRE            0x80000000  /* Self-Refresh Entry           */
 #define SDRAM_CFG1_PMEN           0x40000000  /* Power Management Enable      */
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM DEVPOT Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM DEVPOT Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_DEVOPT_DLL          0x80000000
 #define SDRAM_DEVOPT_DS           0x40000000
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM MCSTS Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM MCSTS Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_MCSTS_MRSC          0x80000000
 #define SDRAM_MCSTS_SRMS          0x40000000
 #define SDRAM_MCSTS_CIS           0x20000000
 
 /*-----------------------------------------------------------------------------
-|  SDRAM Refresh Timer Register
-+-----------------------------------------------------------------------------*/
+  |  SDRAM Refresh Timer Register
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_RTR_RINT_MASK       0xFFFF0000
 #define SDRAM_RTR_RINT_ENCODE(n)  (((n) << 16) & SDRAM_RTR_RINT_MASK)
 #define sdram_HZ_to_ns(hertz)     (1000000000/(hertz))
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM UABus Base Address Reg
-+-----------------------------------------------------------------------------*/
+  |  SDRAM UABus Base Address Reg
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_UABBA_UBBA_MASK     0x0000000F
 
 /*-----------------------------------------------------------------------------+
-|  Memory Bank 0-7 configuration
-+-----------------------------------------------------------------------------*/
+  |  Memory Bank 0-7 configuration
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_BXCR_SDBA_MASK      0xff800000      /* Base address             */
 #define SDRAM_BXCR_SDSZ_MASK      0x000e0000      /* Size                     */
 #define SDRAM_BXCR_SDSZ_8         0x00020000      /*   8M                     */
@@ -570,8 +533,8 @@ int spd_read(uint addr)
 #define SDRAM_BXCR_SDBE           0x00000001      /* Memory Bank Enable       */
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM TR0 Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM TR0 Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_TR0_SDWR_MASK       0x80000000
 #define   SDRAM_TR0_SDWR_2_CLK    0x00000000
 #define   SDRAM_TR0_SDWR_3_CLK    0x80000000
@@ -609,8 +572,8 @@ int spd_read(uint addr)
 #define   SDRAM_TR0_SDRD_4_CLK    0x00000003
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM TR1 Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM TR1 Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_TR1_RDSS_MASK         0xC0000000
 #define   SDRAM_TR1_RDSS_TR0        0x00000000
 #define   SDRAM_TR1_RDSS_TR1        0x40000000
@@ -630,8 +593,8 @@ int spd_read(uint addr)
 #define   SDRAM_TR1_RDCT_MAX        0x000001FF
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM WDDCTR Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM WDDCTR Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_WDDCTR_WRCP_MASK       0xC0000000
 #define   SDRAM_WDDCTR_WRCP_0DEG     0x00000000
 #define   SDRAM_WDDCTR_WRCP_90DEG    0x40000000
@@ -639,8 +602,8 @@ int spd_read(uint addr)
 #define SDRAM_WDDCTR_DCD_MASK        0x000001FF
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM CLKTR Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM CLKTR Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_CLKTR_CLKP_MASK       0xC0000000
 #define   SDRAM_CLKTR_CLKP_0DEG     0x00000000
 #define   SDRAM_CLKTR_CLKP_90DEG    0x40000000
@@ -648,18 +611,17 @@ int spd_read(uint addr)
 #define SDRAM_CLKTR_DCDT_MASK       0x000001FF
 
 /*-----------------------------------------------------------------------------+
-|  SDRAM DLYCAL Options
-+-----------------------------------------------------------------------------*/
+  |  SDRAM DLYCAL Options
+  +-----------------------------------------------------------------------------*/
 #define SDRAM_DLYCAL_DLCV_MASK      0x000003FC
 #define   SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
 #define   SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
 
 /*-----------------------------------------------------------------------------+
-|  General Definition
-+-----------------------------------------------------------------------------*/
+  |  General Definition
+  +-----------------------------------------------------------------------------*/
 #define DEFAULT_SPD_ADDR1   0x53
 #define DEFAULT_SPD_ADDR2   0x52
-#define ONE_BILLION         1000000000
 #define MAXBANKS            4               /* at most 4 dimm banks */
 #define MAX_SPD_BYTES       256
 #define NUMHALFCYCLES       4
@@ -670,22 +632,22 @@ int spd_read(uint addr)
 #define FALSE               0
 
 const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
-    {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-     0xFFFFFFFF, 0xFFFFFFFF},
-    {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-     0x00000000, 0x00000000},
-    {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-     0x55555555, 0x55555555},
-    {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-     0xAAAAAAAA, 0xAAAAAAAA},
-    {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-     0x5A5A5A5A, 0x5A5A5A5A},
-    {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-     0xA5A5A5A5, 0xA5A5A5A5},
-    {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-     0x55AA55AA, 0x55AA55AA},
-    {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-     0xAA55AA55, 0xAA55AA55}
+	{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+	 0xFFFFFFFF, 0xFFFFFFFF},
+	{0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+	 0x00000000, 0x00000000},
+	{0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+	 0x55555555, 0x55555555},
+	{0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+	 0xAAAAAAAA, 0xAAAAAAAA},
+	{0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+	 0x5A5A5A5A, 0x5A5A5A5A},
+	{0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+	 0xA5A5A5A5, 0xA5A5A5A5},
+	{0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+	 0x55AA55AA, 0x55AA55AA},
+	{0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+	 0xAA55AA55, 0xAA55AA55}
 };
 
 
@@ -696,14 +658,14 @@ void get_spd_info(unsigned long* dimm_populated,
 		  unsigned long  num_dimm_banks);
 
 void check_mem_type
-		 (unsigned long* dimm_populated,
-		  unsigned char* iic0_dimm_addr,
-		  unsigned long  num_dimm_banks);
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long  num_dimm_banks);
 
 void check_volt_type
-		 (unsigned long* dimm_populated,
-		  unsigned char* iic0_dimm_addr,
-		  unsigned long  num_dimm_banks);
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long  num_dimm_banks);
 
 void program_cfg0(unsigned long* dimm_populated,
 		  unsigned char* iic0_dimm_addr,
@@ -741,14 +703,14 @@ long  program_bxcr(unsigned long* dimm_populated,
  */
 
 long int spd_sdram(void) {
-    unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
-    unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
-    unsigned long total_size;
-    unsigned long cfg0;
-    unsigned long mcsts;
-    unsigned long num_dimm_banks;               /* on board dimm banks */
+	unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+	unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+	unsigned long total_size;
+	unsigned long cfg0;
+	unsigned long mcsts;
+	unsigned long num_dimm_banks;               /* on board dimm banks */
 
-    num_dimm_banks = sizeof(iic0_dimm_addr);
+	num_dimm_banks = sizeof(iic0_dimm_addr);
 
 	/*
 	 * Make sure I2C controller is initialized
@@ -756,90 +718,90 @@ long int spd_sdram(void) {
 	 */
 	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
 
-    /*
-     * Read the SPD information using I2C interface. Check to see if the
-     * DIMM slots are populated.
-     */
-    get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+	/*
+	 * Read the SPD information using I2C interface. Check to see if the
+	 * DIMM slots are populated.
+	 */
+	get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
 
-    /*
-     * Check the memory type for the dimms plugged.
-     */
-    check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+	/*
+	 * Check the memory type for the dimms plugged.
+	 */
+	check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
 
-    /*
-     * Check the voltage type for the dimms plugged.
-     */
-    check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+	/*
+	 * Check the voltage type for the dimms plugged.
+	 */
+	check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
 
 #if defined(CONFIG_440_GX)
-    /*
-     * Soft-reset SDRAM controller.
-     */
-    mtsdr(sdr_srst, SDR0_SRST_DMC);
-    mtsdr(sdr_srst, 0x00000000);
+	/*
+	 * Soft-reset SDRAM controller.
+	 */
+	mtsdr(sdr_srst, SDR0_SRST_DMC);
+	mtsdr(sdr_srst, 0x00000000);
 #endif
 
-    /*
-     * program 440GP SDRAM controller options (SDRAM0_CFG0)
-     */
-    program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-    /*
-     * program 440GP SDRAM controller options (SDRAM0_CFG1)
-     */
-    program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-    /*
-     * program SDRAM refresh register (SDRAM0_RTR)
-     */
-    program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-    /*
-     * program SDRAM Timing Register 0 (SDRAM0_TR0)
-     */
-    program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-    /*
-     * program the BxCR registers to find out total sdram installed
-     */
-    total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
-	num_dimm_banks);
-
-    /*
-     * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
-     */
-    mtsdram(mem_clktr, 0x40000000);
-
-    /*
-     * delay to ensure 200 usec has elapsed
-     */
-    udelay(400);
-
-    /*
-     * enable the memory controller
-     */
-    mfsdram(mem_cfg0, cfg0);
-    mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
-
-    /*
-     * wait for SDRAM_CFG0_DC_EN to complete
-     */
-    while(1) {
-	mfsdram(mem_mcsts, mcsts);
-	if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
-	    break;
+	/*
+	 * program 440GP SDRAM controller options (SDRAM0_CFG0)
+	 */
+	program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+	/*
+	 * program 440GP SDRAM controller options (SDRAM0_CFG1)
+	 */
+	program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+	/*
+	 * program SDRAM refresh register (SDRAM0_RTR)
+	 */
+	program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+	/*
+	 * program SDRAM Timing Register 0 (SDRAM0_TR0)
+	 */
+	program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+	/*
+	 * program the BxCR registers to find out total sdram installed
+	 */
+	total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+				  num_dimm_banks);
+
+	/*
+	 * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+	 */
+	mtsdram(mem_clktr, 0x40000000);
+
+	/*
+	 * delay to ensure 200 usec has elapsed
+	 */
+	udelay(400);
+
+	/*
+	 * enable the memory controller
+	 */
+	mfsdram(mem_cfg0, cfg0);
+	mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
+
+	/*
+	 * wait for SDRAM_CFG0_DC_EN to complete
+	 */
+	while (1) {
+		mfsdram(mem_mcsts, mcsts);
+		if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
+			break;
+		}
 	}
-    }
 
-    /*
-     * program SDRAM Timing Register 1, adding some delays
-     */
-    program_tr1();
+	/*
+	 * program SDRAM Timing Register 1, adding some delays
+	 */
+	program_tr1();
 
-    /*
-     * if ECC is enabled, initialize parity bits
-     */
+	/*
+	 * if ECC is enabled, initialize parity bits
+	 */
 
 	return total_size;
 }
@@ -847,76 +809,78 @@ long int spd_sdram(void) {
 unsigned char spd_read(uchar chip, uint addr) {
 	unsigned char data[2];
 
-	if (i2c_read(chip, addr, 1, data, 1) == 0)
-		return data[0];
-	else
-		return 0;
+	if (i2c_probe(chip) == 0) {
+		if (i2c_read(chip, addr, 1, data, 1) == 0) {
+			return data[0];
+		}
+	}
+
+	return 0;
 }
 
 void get_spd_info(unsigned long*   dimm_populated,
 		  unsigned char*   iic0_dimm_addr,
 		  unsigned long    num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long dimm_found;
-    unsigned char num_of_bytes;
-    unsigned char total_size;
-
-    dimm_found = FALSE;
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	num_of_bytes = 0;
-	total_size = 0;
-
-	num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
-	total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
-
-	if ((num_of_bytes != 0) && (total_size != 0)) {
-	    dimm_populated[dimm_num] = TRUE;
-	    dimm_found = TRUE;
+	unsigned long dimm_num;
+	unsigned long dimm_found;
+	unsigned char num_of_bytes;
+	unsigned char total_size;
+
+	dimm_found = FALSE;
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		num_of_bytes = 0;
+		total_size = 0;
+
+		num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+		total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+
+		if ((num_of_bytes != 0) && (total_size != 0)) {
+			dimm_populated[dimm_num] = TRUE;
+			dimm_found = TRUE;
 #if 0
-	    printf("DIMM slot %lu: populated\n", dimm_num);
+			printf("DIMM slot %lu: populated\n", dimm_num);
 #endif
-	}
-	else {
-	    dimm_populated[dimm_num] = FALSE;
+		} else {
+			dimm_populated[dimm_num] = FALSE;
 #if 0
-	    printf("DIMM slot %lu: Not populated\n", dimm_num);
+			printf("DIMM slot %lu: Not populated\n", dimm_num);
 #endif
+		}
 	}
-    }
 
-    if (dimm_found == FALSE) {
-	printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
-	hang();
-    }
+	if (dimm_found == FALSE) {
+		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+		hang();
+	}
 }
 
 void check_mem_type(unsigned long*   dimm_populated,
 		    unsigned char*   iic0_dimm_addr,
 		    unsigned long    num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned char dimm_type;
-
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
-	    switch (dimm_type) {
-	    case 7:
+	unsigned long dimm_num;
+	unsigned char dimm_type;
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+			switch (dimm_type) {
+			case 7:
 #if 0
-		printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+				printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
 #endif
-		break;
-	    default:
-		printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
-		    dimm_num);
-		printf("Only DDR SDRAM DIMMs are supported.\n");
-		printf("Replace the DIMM module with a supported DIMM.\n\n");
-		hang();
-		break;
-	    }
+				break;
+			default:
+				printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+				       dimm_num);
+				printf("Only DDR SDRAM DIMMs are supported.\n");
+				printf("Replace the DIMM module with a supported DIMM.\n\n");
+				hang();
+				break;
+			}
+		}
 	}
-    }
 }
 
 
@@ -924,894 +888,877 @@ void check_volt_type(unsigned long*   dimm_populated,
 		     unsigned char*   iic0_dimm_addr,
 		     unsigned long    num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long voltage_type;
-
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
-	    if (voltage_type != 0x04) {
-		printf("ERROR: DIMM %lu with unsupported voltage level.\n",
-		    dimm_num);
-		hang();
-	    }
-	    else {
+	unsigned long dimm_num;
+	unsigned long voltage_type;
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+			if (voltage_type != 0x04) {
+				printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+				       dimm_num);
+				hang();
+			} else {
 #if 0
-		printf("DIMM %lu voltage level supported.\n", dimm_num);
+				printf("DIMM %lu voltage level supported.\n", dimm_num);
 #endif
-	    }
-	    break;
+			}
+			break;
+		}
 	}
-    }
 }
 
 void program_cfg0(unsigned long* dimm_populated,
 		  unsigned char* iic0_dimm_addr,
 		  unsigned long  num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long cfg0;
-    unsigned long ecc_enabled;
-    unsigned char ecc;
-    unsigned char attributes;
-    unsigned long data_width;
-    unsigned long dimm_32bit;
-    unsigned long dimm_64bit;
-
-    /*
-     * get Memory Controller Options 0 data
-     */
-    mfsdram(mem_cfg0, cfg0);
-
-    /*
-     * clear bits
-     */
-    cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
-	      SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
-	      SDRAM_CFG0_DMWD_MASK |
-	      SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
-
-
-    /*
-     * FIXME: assume the DDR SDRAMs in both banks are the same
-     */
-    ecc_enabled = TRUE;
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
-	    if (ecc != 0x02) {
-		ecc_enabled = FALSE;
-	    }
-
-	    /*
-	     * program Registered DIMM Enable
-	     */
-	    attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
-	    if ((attributes & 0x02) != 0x00) {
-		cfg0 |= SDRAM_CFG0_RDEN;
-	    }
-
-	    /*
-	     * program DDR SDRAM Data Width
-	     */
-	    data_width =
-		(unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
-		(((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
-	    if (data_width == 64 || data_width == 72) {
-		dimm_64bit = TRUE;
-		cfg0 |= SDRAM_CFG0_DMWD_64;
-	    }
-	    else if (data_width == 32 || data_width == 40) {
-		dimm_32bit = TRUE;
-		cfg0 |= SDRAM_CFG0_DMWD_32;
-	    }
-	    else {
-		printf("WARNING: DIMM with datawidth of %lu bits.\n",
-		    data_width);
-		printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
-		hang();
-	    }
-	    break;
+	unsigned long dimm_num;
+	unsigned long cfg0;
+	unsigned long ecc_enabled;
+	unsigned char ecc;
+	unsigned char attributes;
+	unsigned long data_width;
+	unsigned long dimm_32bit;
+	unsigned long dimm_64bit;
+
+	/*
+	 * get Memory Controller Options 0 data
+	 */
+	mfsdram(mem_cfg0, cfg0);
+
+	/*
+	 * clear bits
+	 */
+	cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+		  SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+		  SDRAM_CFG0_DMWD_MASK |
+		  SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+
+
+	/*
+	 * FIXME: assume the DDR SDRAMs in both banks are the same
+	 */
+	ecc_enabled = TRUE;
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+			if (ecc != 0x02) {
+				ecc_enabled = FALSE;
+			}
+
+			/*
+			 * program Registered DIMM Enable
+			 */
+			attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+			if ((attributes & 0x02) != 0x00) {
+				cfg0 |= SDRAM_CFG0_RDEN;
+			}
+
+			/*
+			 * program DDR SDRAM Data Width
+			 */
+			data_width =
+				(unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+				(((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+			if (data_width == 64 || data_width == 72) {
+				dimm_64bit = TRUE;
+				cfg0 |= SDRAM_CFG0_DMWD_64;
+			} else if (data_width == 32 || data_width == 40) {
+				dimm_32bit = TRUE;
+				cfg0 |= SDRAM_CFG0_DMWD_32;
+			} else {
+				printf("WARNING: DIMM with datawidth of %lu bits.\n",
+				       data_width);
+				printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+				hang();
+			}
+			break;
+		}
 	}
-    }
-
-    /*
-     * program Memory Data Error Checking
-     */
-    if (ecc_enabled == TRUE) {
-	cfg0 |= SDRAM_CFG0_MCHK_GEN;
-    }
-    else {
-	cfg0 |= SDRAM_CFG0_MCHK_NON;
-    }
-
-    /*
-     * program Page Management Unit
-     */
-    cfg0 |= SDRAM_CFG0_PMUD;
-
-    /*
-     * program Memory Controller Options 0
-     * Note: DCEN must be enabled after all DDR SDRAM controller
-     * configuration registers get initialized.
-     */
-    mtsdram(mem_cfg0, cfg0);
+
+	/*
+	 * program Memory Data Error Checking
+	 */
+	if (ecc_enabled == TRUE) {
+		cfg0 |= SDRAM_CFG0_MCHK_GEN;
+	} else {
+		cfg0 |= SDRAM_CFG0_MCHK_NON;
+	}
+
+	/*
+	 * program Page Management Unit
+	 */
+	cfg0 |= SDRAM_CFG0_PMUD;
+
+	/*
+	 * program Memory Controller Options 0
+	 * Note: DCEN must be enabled after all DDR SDRAM controller
+	 * configuration registers get initialized.
+	 */
+	mtsdram(mem_cfg0, cfg0);
 }
 
 void program_cfg1(unsigned long* dimm_populated,
 		  unsigned char* iic0_dimm_addr,
 		  unsigned long  num_dimm_banks)
 {
-    unsigned long cfg1;
-    mfsdram(mem_cfg1, cfg1);
-
-    /*
-     * Self-refresh exit, disable PM
-     */
-    cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
-
-    /*
-     * program Memory Controller Options 1
-     */
-    mtsdram(mem_cfg1, cfg1);
+	unsigned long cfg1;
+	mfsdram(mem_cfg1, cfg1);
+
+	/*
+	 * Self-refresh exit, disable PM
+	 */
+	cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+
+	/*
+	 * program Memory Controller Options 1
+	 */
+	mtsdram(mem_cfg1, cfg1);
 }
 
 void program_rtr (unsigned long* dimm_populated,
 		  unsigned char* iic0_dimm_addr,
 		  unsigned long  num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long bus_period_x_10;
-    unsigned long refresh_rate = 0;
-    unsigned char refresh_rate_type;
-    unsigned long refresh_interval;
-    unsigned long sdram_rtr;
-    PPC440_SYS_INFO sys_info;
-
-    /*
-     * get the board info
-     */
-    get_sys_info(&sys_info);
-    bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
-
-    for (dimm_num = 0;  dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
-	    switch (refresh_rate_type) {
-	    case 0x00:
-		refresh_rate = 15625;
-		break;
-	    case 0x01:
-		refresh_rate = 15625/4;
-		break;
-	    case 0x02:
-		refresh_rate = 15625/2;
-		break;
-	    case 0x03:
-		refresh_rate = 15626*2;
-		break;
-	    case 0x04:
-		refresh_rate = 15625*4;
-		break;
-	    case 0x05:
-		refresh_rate = 15625*8;
-		break;
-	    default:
-		printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
-		    dimm_num);
-		printf("Replace the DIMM module with a supported DIMM.\n");
-		break;
-	    }
+	unsigned long dimm_num;
+	unsigned long bus_period_x_10;
+	unsigned long refresh_rate = 0;
+	unsigned char refresh_rate_type;
+	unsigned long refresh_interval;
+	unsigned long sdram_rtr;
+	PPC440_SYS_INFO sys_info;
+
+	/*
+	 * get the board info
+	 */
+	get_sys_info(&sys_info);
+	bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
 
-	    break;
+	for (dimm_num = 0;  dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+			switch (refresh_rate_type) {
+			case 0x00:
+				refresh_rate = 15625;
+				break;
+			case 0x01:
+				refresh_rate = 15625/4;
+				break;
+			case 0x02:
+				refresh_rate = 15625/2;
+				break;
+			case 0x03:
+				refresh_rate = 15626*2;
+				break;
+			case 0x04:
+				refresh_rate = 15625*4;
+				break;
+			case 0x05:
+				refresh_rate = 15625*8;
+				break;
+			default:
+				printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+				       dimm_num);
+				printf("Replace the DIMM module with a supported DIMM.\n");
+				break;
+			}
+
+			break;
+		}
 	}
-    }
 
-    refresh_interval = refresh_rate * 10 / bus_period_x_10;
-    sdram_rtr = (refresh_interval & 0x3ff8) <<  16;
+	refresh_interval = refresh_rate * 10 / bus_period_x_10;
+	sdram_rtr = (refresh_interval & 0x3ff8) <<  16;
 
-    /*
-     * program Refresh Timer Register (SDRAM0_RTR)
-     */
-    mtsdram(mem_rtr, sdram_rtr);
+	/*
+	 * program Refresh Timer Register (SDRAM0_RTR)
+	 */
+	mtsdram(mem_rtr, sdram_rtr);
 }
 
 void program_tr0 (unsigned long* dimm_populated,
 		  unsigned char* iic0_dimm_addr,
 		  unsigned long  num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long tr0;
-    unsigned char wcsbc;
-    unsigned char t_rp_ns;
-    unsigned char t_rcd_ns;
-    unsigned char t_ras_ns;
-    unsigned long t_rp_clk;
-    unsigned long t_ras_rcd_clk;
-    unsigned long t_rcd_clk;
-    unsigned long t_rfc_clk;
-    unsigned long plb_check;
-    unsigned char cas_bit;
-    unsigned long cas_index;
-    unsigned char cas_2_0_available;
-    unsigned char cas_2_5_available;
-    unsigned char cas_3_0_available;
-    unsigned long cycle_time_ns_x_10[3];
-    unsigned long tcyc_3_0_ns_x_10;
-    unsigned long tcyc_2_5_ns_x_10;
-    unsigned long tcyc_2_0_ns_x_10;
-    unsigned long tcyc_reg;
-    unsigned long bus_period_x_10;
-    PPC440_SYS_INFO sys_info;
-    unsigned long residue;
-
-    /*
-     * get the board info
-     */
-    get_sys_info(&sys_info);
-    bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
-    /*
-     * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
-     */
-    mfsdram(mem_tr0, tr0);
-    tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
-	     SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
-	     SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
-	     SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
-
-    /*
-     * initialization
-     */
-    wcsbc = 0;
-    t_rp_ns = 0;
-    t_rcd_ns = 0;
-    t_ras_ns = 0;
-    cas_2_0_available = TRUE;
-    cas_2_5_available = TRUE;
-    cas_3_0_available = TRUE;
-    tcyc_2_0_ns_x_10 = 0;
-    tcyc_2_5_ns_x_10 = 0;
-    tcyc_3_0_ns_x_10 = 0;
-
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
-	    t_rp_ns  = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
-	    t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
-	    t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
-	    cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-
-	    for (cas_index = 0; cas_index < 3; cas_index++) {
-		switch (cas_index) {
-		case 0:
-		    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
-		    break;
-		case 1:
-		    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
-		    break;
-		default:
-		    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
-		    break;
-		}
+	unsigned long dimm_num;
+	unsigned long tr0;
+	unsigned char wcsbc;
+	unsigned char t_rp_ns;
+	unsigned char t_rcd_ns;
+	unsigned char t_ras_ns;
+	unsigned long t_rp_clk;
+	unsigned long t_ras_rcd_clk;
+	unsigned long t_rcd_clk;
+	unsigned long t_rfc_clk;
+	unsigned long plb_check;
+	unsigned char cas_bit;
+	unsigned long cas_index;
+	unsigned char cas_2_0_available;
+	unsigned char cas_2_5_available;
+	unsigned char cas_3_0_available;
+	unsigned long cycle_time_ns_x_10[3];
+	unsigned long tcyc_3_0_ns_x_10;
+	unsigned long tcyc_2_5_ns_x_10;
+	unsigned long tcyc_2_0_ns_x_10;
+	unsigned long tcyc_reg;
+	unsigned long bus_period_x_10;
+	PPC440_SYS_INFO sys_info;
+	unsigned long residue;
 
-		if ((tcyc_reg & 0x0F) >= 10) {
-		    printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
-			dimm_num);
-		    hang();
-		}
+	/*
+	 * get the board info
+	 */
+	get_sys_info(&sys_info);
+	bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
 
-		cycle_time_ns_x_10[cas_index] =
-		    (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
-	    }
-
-	    cas_index = 0;
-
-	    if ((cas_bit & 0x80) != 0) {
-		cas_index += 3;
-	    }
-	    else if ((cas_bit & 0x40) != 0) {
-		cas_index += 2;
-	    }
-	    else if ((cas_bit & 0x20) != 0) {
-		cas_index += 1;
-	    }
-
-	    if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
-		tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
-		cas_index++;
-	    }
-	    else {
-		if (cas_index != 0) {
-		    cas_index++;
-		}
-		cas_3_0_available = FALSE;
-	    }
-
-	    if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
-		tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
-		cas_index++;
-	    }
-	    else {
-		if (cas_index != 0) {
-		    cas_index++;
-		}
-		cas_2_5_available = FALSE;
-	    }
-
-	    if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
-		tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
-		cas_index++;
-	    }
-	    else {
-		if (cas_index != 0) {
-		    cas_index++;
+	/*
+	 * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+	 */
+	mfsdram(mem_tr0, tr0);
+	tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+		 SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+		 SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+		 SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+
+	/*
+	 * initialization
+	 */
+	wcsbc = 0;
+	t_rp_ns = 0;
+	t_rcd_ns = 0;
+	t_ras_ns = 0;
+	cas_2_0_available = TRUE;
+	cas_2_5_available = TRUE;
+	cas_3_0_available = TRUE;
+	tcyc_2_0_ns_x_10 = 0;
+	tcyc_2_5_ns_x_10 = 0;
+	tcyc_3_0_ns_x_10 = 0;
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+			t_rp_ns  = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+			t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+			t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+			cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+			for (cas_index = 0; cas_index < 3; cas_index++) {
+				switch (cas_index) {
+				case 0:
+					tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+					break;
+				case 1:
+					tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+					break;
+				default:
+					tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+					break;
+				}
+
+				if ((tcyc_reg & 0x0F) >= 10) {
+					printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+					       dimm_num);
+					hang();
+				}
+
+				cycle_time_ns_x_10[cas_index] =
+					(((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+			}
+
+			cas_index = 0;
+
+			if ((cas_bit & 0x80) != 0) {
+				cas_index += 3;
+			} else if ((cas_bit & 0x40) != 0) {
+				cas_index += 2;
+			} else if ((cas_bit & 0x20) != 0) {
+				cas_index += 1;
+			}
+
+			if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+				tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+				cas_index++;
+			} else {
+				if (cas_index != 0) {
+					cas_index++;
+				}
+				cas_3_0_available = FALSE;
+			}
+
+			if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+				tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+				cas_index++;
+			} else {
+				if (cas_index != 0) {
+					cas_index++;
+				}
+				cas_2_5_available = FALSE;
+			}
+
+			if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+				tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+				cas_index++;
+			} else {
+				if (cas_index != 0) {
+					cas_index++;
+				}
+				cas_2_0_available = FALSE;
+			}
+
+			break;
 		}
-		cas_2_0_available = FALSE;
-	    }
+	}
+
+	/*
+	 * Program SD_WR and SD_WCSBC fields
+	 */
+	tr0 |= SDRAM_TR0_SDWR_2_CLK;                /* Write Recovery: 2 CLK */
+	switch (wcsbc) {
+	case 0:
+		tr0 |= SDRAM_TR0_SDWD_0_CLK;
+		break;
+	default:
+		tr0 |= SDRAM_TR0_SDWD_1_CLK;
+		break;
+	}
+
+	/*
+	 * Program SD_CASL field
+	 */
+	if ((cas_2_0_available == TRUE) &&
+	    (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+		tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+	} else if ((cas_2_5_available == TRUE) &&
+		 (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+		tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+	} else if ((cas_3_0_available == TRUE) &&
+		 (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+		tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+	} else {
+		printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+		printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+		printf("Make sure the PLB speed is within the supported range.\n");
+		hang();
+	}
+
+	/*
+	 * Calculate Trp in clock cycles and round up if necessary
+	 * Program SD_PTA field
+	 */
+	t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+	plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+	if (sys_info.freqPLB != plb_check) {
+		t_rp_clk++;
+	}
+	switch ((unsigned long)t_rp_clk) {
+	case 0:
+	case 1:
+	case 2:
+		tr0 |= SDRAM_TR0_SDPA_2_CLK;
+		break;
+	case 3:
+		tr0 |= SDRAM_TR0_SDPA_3_CLK;
+		break;
+	default:
+		tr0 |= SDRAM_TR0_SDPA_4_CLK;
+		break;
+	}
+
+	/*
+	 * Program SD_CTP field
+	 */
+	t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+	plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+	if (sys_info.freqPLB != plb_check) {
+		t_ras_rcd_clk++;
+	}
+	switch (t_ras_rcd_clk) {
+	case 0:
+	case 1:
+	case 2:
+		tr0 |= SDRAM_TR0_SDCP_2_CLK;
+		break;
+	case 3:
+		tr0 |= SDRAM_TR0_SDCP_3_CLK;
+		break;
+	case 4:
+		tr0 |= SDRAM_TR0_SDCP_4_CLK;
+		break;
+	default:
+		tr0 |= SDRAM_TR0_SDCP_5_CLK;
+		break;
+	}
+
+	/*
+	 * Program SD_LDF field
+	 */
+	tr0 |= SDRAM_TR0_SDLD_2_CLK;
+
+	/*
+	 * Program SD_RFTA field
+	 * FIXME tRFC hardcoded as 75 nanoseconds
+	 */
+	t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+	residue = sys_info.freqPLB % (ONE_BILLION / 75);
+	if (residue >= (ONE_BILLION / 150)) {
+		t_rfc_clk++;
+	}
+	switch (t_rfc_clk) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		tr0 |= SDRAM_TR0_SDRA_6_CLK;
+		break;
+	case 7:
+		tr0 |= SDRAM_TR0_SDRA_7_CLK;
+		break;
+	case 8:
+		tr0 |= SDRAM_TR0_SDRA_8_CLK;
+		break;
+	case 9:
+		tr0 |= SDRAM_TR0_SDRA_9_CLK;
+		break;
+	case 10:
+		tr0 |= SDRAM_TR0_SDRA_10_CLK;
+		break;
+	case 11:
+		tr0 |= SDRAM_TR0_SDRA_11_CLK;
+		break;
+	case 12:
+		tr0 |= SDRAM_TR0_SDRA_12_CLK;
+		break;
+	default:
+		tr0 |= SDRAM_TR0_SDRA_13_CLK;
+		break;
+	}
 
-	    break;
+	/*
+	 * Program SD_RCD field
+	 */
+	t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+	plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+	if (sys_info.freqPLB != plb_check) {
+		t_rcd_clk++;
+	}
+	switch (t_rcd_clk) {
+	case 0:
+	case 1:
+	case 2:
+		tr0 |= SDRAM_TR0_SDRD_2_CLK;
+		break;
+	case 3:
+		tr0 |= SDRAM_TR0_SDRD_3_CLK;
+		break;
+	default:
+		tr0 |= SDRAM_TR0_SDRD_4_CLK;
+		break;
 	}
-    }
-
-    /*
-     * Program SD_WR and SD_WCSBC fields
-     */
-    tr0 |= SDRAM_TR0_SDWR_2_CLK;                /* Write Recovery: 2 CLK */
-    switch (wcsbc) {
-    case 0:
-	tr0 |= SDRAM_TR0_SDWD_0_CLK;
-	break;
-    default:
-	tr0 |= SDRAM_TR0_SDWD_1_CLK;
-	break;
-    }
-
-    /*
-     * Program SD_CASL field
-     */
-    if ((cas_2_0_available == TRUE) &&
-	(bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
-	tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
-    }
-    else if((cas_2_5_available == TRUE) &&
-	(bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
-	tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
-    }
-    else if((cas_3_0_available == TRUE) &&
-	(bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
-	tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
-    }
-    else {
-	printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
-	printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
-	printf("Make sure the PLB speed is within the supported range.\n");
-	hang();
-    }
-
-    /*
-     * Calculate Trp in clock cycles and round up if necessary
-     * Program SD_PTA field
-     */
-    t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
-    plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
-    if (sys_info.freqPLB != plb_check) {
-	t_rp_clk++;
-    }
-    switch ((unsigned long)t_rp_clk) {
-    case 0:
-    case 1:
-    case 2:
-	tr0 |= SDRAM_TR0_SDPA_2_CLK;
-	break;
-    case 3:
-	tr0 |= SDRAM_TR0_SDPA_3_CLK;
-	break;
-    default:
-	tr0 |= SDRAM_TR0_SDPA_4_CLK;
-	break;
-    }
-
-    /*
-     * Program SD_CTP field
-     */
-    t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
-    plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
-    if (sys_info.freqPLB != plb_check) {
-	t_ras_rcd_clk++;
-    }
-    switch (t_ras_rcd_clk) {
-    case 0:
-    case 1:
-    case 2:
-      tr0 |= SDRAM_TR0_SDCP_2_CLK;
-      break;
-    case 3:
-      tr0 |= SDRAM_TR0_SDCP_3_CLK;
-      break;
-    case 4:
-      tr0 |= SDRAM_TR0_SDCP_4_CLK;
-      break;
-    default:
-      tr0 |= SDRAM_TR0_SDCP_5_CLK;
-      break;
-    }
-
-    /*
-     * Program SD_LDF field
-     */
-    tr0 |= SDRAM_TR0_SDLD_2_CLK;
-
-    /*
-     * Program SD_RFTA field
-     * FIXME tRFC hardcoded as 75 nanoseconds
-     */
-    t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
-    residue = sys_info.freqPLB % (ONE_BILLION / 75);
-    if (residue >= (ONE_BILLION / 150)) {
-	t_rfc_clk++;
-    }
-    switch (t_rfc_clk) {
-    case 0:
-    case 1:
-    case 2:
-    case 3:
-    case 4:
-    case 5:
-    case 6:
-	tr0 |= SDRAM_TR0_SDRA_6_CLK;
-	break;
-    case 7:
-	tr0 |= SDRAM_TR0_SDRA_7_CLK;
-	break;
-    case 8:
-	tr0 |= SDRAM_TR0_SDRA_8_CLK;
-	break;
-    case 9:
-	tr0 |= SDRAM_TR0_SDRA_9_CLK;
-	break;
-    case 10:
-	tr0 |= SDRAM_TR0_SDRA_10_CLK;
-	break;
-    case 11:
-	tr0 |= SDRAM_TR0_SDRA_11_CLK;
-	break;
-    case 12:
-	tr0 |= SDRAM_TR0_SDRA_12_CLK;
-	break;
-    default:
-	tr0 |= SDRAM_TR0_SDRA_13_CLK;
-	break;
-    }
-
-    /*
-     * Program SD_RCD field
-     */
-    t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
-    plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
-    if (sys_info.freqPLB != plb_check) {
-	t_rcd_clk++;
-    }
-    switch (t_rcd_clk) {
-    case 0:
-    case 1:
-    case 2:
-	tr0 |= SDRAM_TR0_SDRD_2_CLK;
-	break;
-    case 3:
-	tr0 |= SDRAM_TR0_SDRD_3_CLK;
-	break;
-    default:
-	tr0 |= SDRAM_TR0_SDRD_4_CLK;
-	break;
-    }
 
 #if 0
-    printf("tr0: %x\n", tr0);
+	printf("tr0: %x\n", tr0);
 #endif
-    mtsdram(mem_tr0, tr0);
+	mtsdram(mem_tr0, tr0);
 }
 
 void program_tr1 (void)
 {
-    unsigned long tr0;
-    unsigned long tr1;
-    unsigned long cfg0;
-    unsigned long ecc_temp;
-    unsigned long dlycal;
-    unsigned long dly_val;
-    unsigned long i, j, k;
-    unsigned long bxcr_num;
-    unsigned long max_pass_length;
-    unsigned long current_pass_length;
-    unsigned long current_fail_length;
-    unsigned long current_start;
-    unsigned long rdclt;
-    unsigned long rdclt_offset;
-    long max_start;
-    long max_end;
-    long rdclt_average;
-    unsigned char window_found;
-    unsigned char fail_found;
-    unsigned char pass_found;
-    unsigned long * membase;
-    PPC440_SYS_INFO sys_info;
-
-    /*
-     * get the board info
-     */
-    get_sys_info(&sys_info);
-
-    /*
-     * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
-     */
-    mfsdram(mem_tr1, tr1);
-    tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
-	     SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
-
-    mfsdram(mem_tr0, tr0);
-    if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
-       (sys_info.freqPLB > 100000000)) {
-	tr1 |= SDRAM_TR1_RDSS_TR2;
-	tr1 |= SDRAM_TR1_RDSL_STAGE3;
-	tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
-    }
-    else {
-	tr1 |= SDRAM_TR1_RDSS_TR1;
-	tr1 |= SDRAM_TR1_RDSL_STAGE2;
-	tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
-    }
-
-    /*
-     * save CFG0 ECC setting to a temporary variable and turn ECC off
-     */
-    mfsdram(mem_cfg0, cfg0);
-    ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
-    mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
-
-    /*
-     * get the delay line calibration register value
-     */
-    mfsdram(mem_dlycal, dlycal);
-    dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
-    max_pass_length = 0;
-    max_start = 0;
-    max_end = 0;
-    current_pass_length = 0;
-    current_fail_length = 0;
-    current_start = 0;
-    rdclt_offset = 0;
-    window_found = FALSE;
-    fail_found = FALSE;
-    pass_found = FALSE;
+	unsigned long tr0;
+	unsigned long tr1;
+	unsigned long cfg0;
+	unsigned long ecc_temp;
+	unsigned long dlycal;
+	unsigned long dly_val;
+	unsigned long i, j, k;
+	unsigned long bxcr_num;
+	unsigned long max_pass_length;
+	unsigned long current_pass_length;
+	unsigned long current_fail_length;
+	unsigned long current_start;
+	unsigned long rdclt;
+	unsigned long rdclt_offset;
+	long max_start;
+	long max_end;
+	long rdclt_average;
+	unsigned char window_found;
+	unsigned char fail_found;
+	unsigned char pass_found;
+	unsigned long * membase;
+	PPC440_SYS_INFO sys_info;
+
+	/*
+	 * get the board info
+	 */
+	get_sys_info(&sys_info);
+
+	/*
+	 * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+	 */
+	mfsdram(mem_tr1, tr1);
+	tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+		 SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+
+	mfsdram(mem_tr0, tr0);
+	if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+	    (sys_info.freqPLB > 100000000)) {
+		tr1 |= SDRAM_TR1_RDSS_TR2;
+		tr1 |= SDRAM_TR1_RDSL_STAGE3;
+		tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+	} else {
+		tr1 |= SDRAM_TR1_RDSS_TR1;
+		tr1 |= SDRAM_TR1_RDSL_STAGE2;
+		tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+	}
+
+	/*
+	 * save CFG0 ECC setting to a temporary variable and turn ECC off
+	 */
+	mfsdram(mem_cfg0, cfg0);
+	ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+	mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+
+	/*
+	 * get the delay line calibration register value
+	 */
+	mfsdram(mem_dlycal, dlycal);
+	dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+	max_pass_length = 0;
+	max_start = 0;
+	max_end = 0;
+	current_pass_length = 0;
+	current_fail_length = 0;
+	current_start = 0;
+	rdclt_offset = 0;
+	window_found = FALSE;
+	fail_found = FALSE;
+	pass_found = FALSE;
 #ifdef DEBUG
-    printf("Starting memory test ");
+	printf("Starting memory test ");
 #endif
-    for (k = 0; k < NUMHALFCYCLES; k++) {
-	for (rdclt = 0; rdclt < dly_val; rdclt++)  {
-	    /*
-	     * Set the timing reg for the test.
-	     */
-	    mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
-
-	    for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
-		mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
-		if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
-		    /* Bank is enabled */
-		    membase = (unsigned long*)
-			(mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
-
-		    /*
-		     * Run the short memory test
-		     */
-		    for (i = 0; i < NUMMEMTESTS; i++) {
-			for (j = 0; j < NUMMEMWORDS; j++) {
-			    membase[j] = test[i][j];
-			    ppcDcbf((unsigned long)&(membase[j]));
+	for (k = 0; k < NUMHALFCYCLES; k++) {
+		for (rdclt = 0; rdclt < dly_val; rdclt++)  {
+			/*
+			 * Set the timing reg for the test.
+			 */
+			mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+
+			for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+				mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
+				if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+					/* Bank is enabled */
+					membase = (unsigned long*)
+						(mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+
+					/*
+					 * Run the short memory test
+					 */
+					for (i = 0; i < NUMMEMTESTS; i++) {
+						for (j = 0; j < NUMMEMWORDS; j++) {
+							membase[j] = test[i][j];
+							ppcDcbf((unsigned long)&(membase[j]));
+						}
+
+						for (j = 0; j < NUMMEMWORDS; j++) {
+							if (membase[j] != test[i][j]) {
+								ppcDcbf((unsigned long)&(membase[j]));
+								break;
+							}
+							ppcDcbf((unsigned long)&(membase[j]));
+						}
+
+						if (j < NUMMEMWORDS) {
+							break;
+						}
+					}
+
+					/*
+					 * see if the rdclt value passed
+					 */
+					if (i < NUMMEMTESTS) {
+						break;
+					}
+				}
 			}
 
-			for (j = 0; j < NUMMEMWORDS; j++) {
-			    if (membase[j] != test[i][j]) {
-				ppcDcbf((unsigned long)&(membase[j]));
-				break;
-			    }
-			    ppcDcbf((unsigned long)&(membase[j]));
+			if (bxcr_num == MAXBXCR) {
+				if (fail_found == TRUE) {
+					pass_found = TRUE;
+					if (current_pass_length == 0) {
+						current_start = rdclt_offset + rdclt;
+					}
+
+					current_fail_length = 0;
+					current_pass_length++;
+
+					if (current_pass_length > max_pass_length) {
+						max_pass_length = current_pass_length;
+						max_start = current_start;
+						max_end = rdclt_offset + rdclt;
+					}
+				}
+			} else {
+				current_pass_length = 0;
+				current_fail_length++;
+
+				if (current_fail_length >= (dly_val>>2)) {
+					if (fail_found == FALSE) {
+						fail_found = TRUE;
+					} else if (pass_found == TRUE) {
+						window_found = TRUE;
+						break;
+					}
+				}
 			}
-
-			if (j < NUMMEMWORDS) {
-			    break;
-			}
-		    }
-
-		    /*
-		     * see if the rdclt value passed
-		     */
-		    if (i < NUMMEMTESTS) {
-			break;
-		    }
 		}
-	    }
-
-	    if (bxcr_num == MAXBXCR) {
-		if (fail_found == TRUE) {
-		    pass_found = TRUE;
-		    if (current_pass_length == 0) {
-			current_start = rdclt_offset + rdclt;
-		    }
-
-		    current_fail_length = 0;
-		    current_pass_length++;
-
-		    if (current_pass_length > max_pass_length) {
-			max_pass_length = current_pass_length;
-			max_start = current_start;
-			max_end = rdclt_offset + rdclt;
-		    }
-		}
-	    }
-	    else {
-		current_pass_length = 0;
-		current_fail_length++;
-
-		if (current_fail_length >= (dly_val>>2)) {
-		    if (fail_found == FALSE) {
-			fail_found = TRUE;
-		    }
-		    else if (pass_found == TRUE) {
-			window_found = TRUE;
+#ifdef DEBUG
+		printf(".");
+#endif
+		if (window_found == TRUE) {
 			break;
-		    }
 		}
-	    }
+
+		tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+		rdclt_offset += dly_val;
 	}
 #ifdef DEBUG
-	printf(".");
+	printf("\n");
 #endif
-	if (window_found == TRUE) {
-	    break;
+
+	/*
+	 * make sure we find the window
+	 */
+	if (window_found == FALSE) {
+		printf("ERROR: Cannot determine a common read delay.\n");
+		hang();
 	}
 
-	tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
-	rdclt_offset += dly_val;
-    }
-#ifdef DEBUG
-    printf("\n");
-#endif
+	/*
+	 * restore the orignal ECC setting
+	 */
+	mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+
+	/*
+	 * set the SDRAM TR1 RDCD value
+	 */
+	tr1 &= ~SDRAM_TR1_RDCD_MASK;
+	if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+		tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+	} else {
+		tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+	}
 
-    /*
-     * make sure we find the window
-     */
-    if (window_found == FALSE) {
-       printf("ERROR: Cannot determine a common read delay.\n");
-       hang();
-    }
-
-    /*
-     * restore the orignal ECC setting
-     */
-    mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
-
-    /*
-     * set the SDRAM TR1 RDCD value
-     */
-    tr1 &= ~SDRAM_TR1_RDCD_MASK;
-    if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
-	tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
-    }
-    else {
-	tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
-    }
-
-    /*
-     * set the SDRAM TR1 RDCLT value
-     */
-    tr1 &= ~SDRAM_TR1_RDCT_MASK;
-    while (max_end >= (dly_val<<1)) {
-	max_end -= (dly_val<<1);
-	max_start -= (dly_val<<1);
-    }
-
-    rdclt_average = ((max_start + max_end) >> 1);
-    if (rdclt_average >= 0x60)
-	while(1);
-
-    if (rdclt_average < 0) {
-	rdclt_average = 0;
-    }
-
-    if (rdclt_average >= dly_val) {
-	rdclt_average -= dly_val;
-	tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
-    }
-    tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+	/*
+	 * set the SDRAM TR1 RDCLT value
+	 */
+	tr1 &= ~SDRAM_TR1_RDCT_MASK;
+	while (max_end >= (dly_val << 1)) {
+		max_end -= (dly_val << 1);
+		max_start -= (dly_val << 1);
+	}
+
+	rdclt_average = ((max_start + max_end) >> 1);
+	if (rdclt_average >= 0x60)
+		while (1)
+			;
+
+	if (rdclt_average < 0) {
+		rdclt_average = 0;
+	}
+
+	if (rdclt_average >= dly_val) {
+		rdclt_average -= dly_val;
+		tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+	}
+	tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
 
 #if 0
-    printf("tr1: %x\n", tr1);
+	printf("tr1: %x\n", tr1);
 #endif
-    /*
-     * program SDRAM Timing Register 1 TR1
-     */
-    mtsdram(mem_tr1, tr1);
+	/*
+	 * program SDRAM Timing Register 1 TR1
+	 */
+	mtsdram(mem_tr1, tr1);
 }
 
 unsigned long program_bxcr(unsigned long* dimm_populated,
 			   unsigned char* iic0_dimm_addr,
 			   unsigned long  num_dimm_banks)
 {
-    unsigned long dimm_num;
-    unsigned long bxcr_num;
-    unsigned long bank_base_addr;
-    unsigned long bank_size_bytes;
-    unsigned long cr;
-    unsigned long i;
-    unsigned long temp;
-    unsigned char num_row_addr;
-    unsigned char num_col_addr;
-    unsigned char num_banks;
-    unsigned char bank_size_id;
-
-
-    /*
-     * Set the BxCR regs.  First, wipe out the bank config registers.
-     */
-    for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
-	mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
-	mtdcr(memcfgd, 0x00000000);
-    }
-
-    /*
-     * reset the bank_base address
-     */
-    bank_base_addr = CFG_SDRAM_BASE;
-
-    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-	if (dimm_populated[dimm_num] == TRUE) {
-	    num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
-	    num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
-	    num_banks    = spd_read(iic0_dimm_addr[dimm_num], 5);
-	    bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
-
-	    /*
-	     * Set the SDRAM0_BxCR regs
-	     */
-	    cr = 0;
-	    bank_size_bytes = 4 * 1024 * 1024 * bank_size_id;
-	    switch (bank_size_id) {
-	    case 0x02:
-		cr |= SDRAM_BXCR_SDSZ_8;
-		break;
-	    case 0x04:
-		cr |= SDRAM_BXCR_SDSZ_16;
-		break;
-	    case 0x08:
-		cr |= SDRAM_BXCR_SDSZ_32;
-		break;
-	    case 0x10:
-		cr |= SDRAM_BXCR_SDSZ_64;
-		break;
-	    case 0x20:
-		cr |= SDRAM_BXCR_SDSZ_128;
-		break;
-	    case 0x40:
-		cr |= SDRAM_BXCR_SDSZ_256;
-		break;
-	    case 0x80:
-		cr |= SDRAM_BXCR_SDSZ_512;
-		break;
-	    default:
-		printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
-		    dimm_num);
-		printf("ERROR: Unsupported value for the banksize: %d.\n",
-		   bank_size_id);
-		printf("Replace the DIMM module with a supported DIMM.\n\n");
-		hang();
-	    }
+	unsigned long dimm_num;
+	unsigned long bxcr_num;
+	unsigned long bank_base_addr;
+	unsigned long bank_size_bytes;
+	unsigned long cr;
+	unsigned long i;
+	unsigned long temp;
+	unsigned char num_row_addr;
+	unsigned char num_col_addr;
+	unsigned char num_banks;
+	unsigned char bank_size_id;
 
-	    switch (num_col_addr) {
-	    case 0x08:
-		cr |= SDRAM_BXCR_SDAM_1;
-		break;
-	    case 0x09:
-		cr |= SDRAM_BXCR_SDAM_2;
-		break;
-	    case 0x0A:
-		cr |= SDRAM_BXCR_SDAM_3;
-		break;
-	    case 0x0B:
-		cr |= SDRAM_BXCR_SDAM_4;
-		break;
-	    default:
-		printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
-		   dimm_num);
-		printf("ERROR: Unsupported value for number of "
-		   "column addresses: %d.\n", num_col_addr);
-		printf("Replace the DIMM module with a supported DIMM.\n\n");
-		hang();
-	    }
-
-	    /*
-	     * enable the bank
-	     */
-	    cr |= SDRAM_BXCR_SDBE;
-
-	    /*------------------------------------------------------------------
-	    | This next section is hardware dependent and must be programmed
-	    | to match the hardware.
-	    +-----------------------------------------------------------------*/
-	    if (dimm_num == 0) {
-		for (i = 0; i < num_banks; i++) {
-		    mtdcr(memcfga, mem_b0cr + (i << 2));
-		    temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
-					      SDRAM_BXCR_SDSZ_MASK |
-					      SDRAM_BXCR_SDAM_MASK |
-					      SDRAM_BXCR_SDBE);
-		    cr |= temp;
-		    cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
-		    mtdcr(memcfgd, cr);
-		    bank_base_addr += bank_size_bytes;
-		}
-	    }
-	    else {
-		for (i = 0; i < num_banks; i++) {
-		    mtdcr(memcfga, mem_b2cr + (i << 2));
-		    temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
-					      SDRAM_BXCR_SDSZ_MASK |
-					      SDRAM_BXCR_SDAM_MASK |
-					      SDRAM_BXCR_SDBE);
-		    cr |= temp;
-		    cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
-		    mtdcr(memcfgd, cr);
-		    bank_base_addr += bank_size_bytes;
+
+	/*
+	 * Set the BxCR regs.  First, wipe out the bank config registers.
+	 */
+	for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+		mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
+		mtdcr(memcfgd, 0x00000000);
+	}
+
+	/*
+	 * reset the bank_base address
+	 */
+	bank_base_addr = CFG_SDRAM_BASE;
+
+	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+		if (dimm_populated[dimm_num] == TRUE) {
+			num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+			num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+			num_banks    = spd_read(iic0_dimm_addr[dimm_num], 5);
+			bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+			/*
+			 * Set the SDRAM0_BxCR regs
+			 */
+			cr = 0;
+			bank_size_bytes = 4 * 1024 * 1024 * bank_size_id;
+			switch (bank_size_id) {
+			case 0x02:
+				cr |= SDRAM_BXCR_SDSZ_8;
+				break;
+			case 0x04:
+				cr |= SDRAM_BXCR_SDSZ_16;
+				break;
+			case 0x08:
+				cr |= SDRAM_BXCR_SDSZ_32;
+				break;
+			case 0x10:
+				cr |= SDRAM_BXCR_SDSZ_64;
+				break;
+			case 0x20:
+				cr |= SDRAM_BXCR_SDSZ_128;
+				break;
+			case 0x40:
+				cr |= SDRAM_BXCR_SDSZ_256;
+				break;
+			case 0x80:
+				cr |= SDRAM_BXCR_SDSZ_512;
+				break;
+			default:
+				printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+				       dimm_num);
+				printf("ERROR: Unsupported value for the banksize: %d.\n",
+				       bank_size_id);
+				printf("Replace the DIMM module with a supported DIMM.\n\n");
+				hang();
+			}
+
+			switch (num_col_addr) {
+			case 0x08:
+				cr |= SDRAM_BXCR_SDAM_1;
+				break;
+			case 0x09:
+				cr |= SDRAM_BXCR_SDAM_2;
+				break;
+			case 0x0A:
+				cr |= SDRAM_BXCR_SDAM_3;
+				break;
+			case 0x0B:
+				cr |= SDRAM_BXCR_SDAM_4;
+				break;
+			default:
+				printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+				       dimm_num);
+				printf("ERROR: Unsupported value for number of "
+				       "column addresses: %d.\n", num_col_addr);
+				printf("Replace the DIMM module with a supported DIMM.\n\n");
+				hang();
+			}
+
+			/*
+			 * enable the bank
+			 */
+			cr |= SDRAM_BXCR_SDBE;
+
+			/*------------------------------------------------------------------
+			  | This next section is hardware dependent and must be programmed
+			  | to match the hardware.
+			  +-----------------------------------------------------------------*/
+			if (dimm_num == 0) {
+				for (i = 0; i < num_banks; i++) {
+					mtdcr(memcfga, mem_b0cr + (i << 2));
+					temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+								  SDRAM_BXCR_SDSZ_MASK |
+								  SDRAM_BXCR_SDAM_MASK |
+								  SDRAM_BXCR_SDBE);
+					cr |= temp;
+					cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+					mtdcr(memcfgd, cr);
+					bank_base_addr += bank_size_bytes;
+				}
+			} else {
+				for (i = 0; i < num_banks; i++) {
+					mtdcr(memcfga, mem_b2cr + (i << 2));
+					temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+								  SDRAM_BXCR_SDSZ_MASK |
+								  SDRAM_BXCR_SDAM_MASK |
+								  SDRAM_BXCR_SDBE);
+					cr |= temp;
+					cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+					mtdcr(memcfgd, cr);
+					bank_base_addr += bank_size_bytes;
+				}
+			}
 		}
-	    }
 	}
-    }
 
-    return(bank_base_addr);
+	return(bank_base_addr);
 }
 
 void program_ecc (unsigned long  num_bytes)
 {
-    unsigned long bank_base_addr;
-    unsigned long current_address;
-    unsigned long end_address;
-    unsigned long address_increment;
-    unsigned long cfg0;
-
-    /*
-     * get Memory Controller Options 0 data
-     */
-    mfsdram(mem_cfg0, cfg0);
-
-    /*
-     * reset the bank_base address
-     */
-    bank_base_addr = CFG_SDRAM_BASE;
-
-    if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
-	mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
-	    SDRAM_CFG0_MCHK_GEN);
-
-	if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
-	    address_increment = 4;
-	}
-	else {
-	    address_increment = 8;
-	}
+	unsigned long bank_base_addr;
+	unsigned long current_address;
+	unsigned long end_address;
+	unsigned long address_increment;
+	unsigned long cfg0;
 
-	current_address = (unsigned long)(bank_base_addr);
-	end_address = (unsigned long)(bank_base_addr) + num_bytes;
+	/*
+	 * get Memory Controller Options 0 data
+	 */
+	mfsdram(mem_cfg0, cfg0);
 
-	while (current_address < end_address) {
-	    *((unsigned long*)current_address) = 0x00000000;
-	    current_address += address_increment;
-	}
+	/*
+	 * reset the bank_base address
+	 */
+	bank_base_addr = CFG_SDRAM_BASE;
+
+	if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
+		mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+			SDRAM_CFG0_MCHK_GEN);
+
+		if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
+			address_increment = 4;
+		} else {
+			address_increment = 8;
+		}
+
+		current_address = (unsigned long)(bank_base_addr);
+		end_address = (unsigned long)(bank_base_addr) + num_bytes;
 
-	mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
-	    SDRAM_CFG0_MCHK_CHK);
-    }
+		while (current_address < end_address) {
+			*((unsigned long*)current_address) = 0x00000000;
+			current_address += address_increment;
+		}
+
+		mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+			SDRAM_CFG0_MCHK_CHK);
+	}
 }
 
 #endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 0d6d88a2ab..7a4af75efe 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -194,7 +194,96 @@ ulong get_PCI_freq (void)
 
 
 #elif defined(CONFIG_440)
-#if !defined(CONFIG_440_GX)
+
+#if  defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+void get_sys_info (sys_info_t *sysInfo)
+{
+	unsigned long temp;
+	unsigned long reg;
+	unsigned long lfdiv;
+	unsigned long m;
+	unsigned long prbdv0;
+	/*
+	  WARNING: ASSUMES the following:
+	  ENG=1
+	  PRADV0=1
+	  PRBDV0=1
+	*/
+
+	/* Decode CPR0_PLLD0 for divisors */
+	mfclk(clk_plld, reg);
+	temp = (reg & PLLD_FWDVA_MASK) >> 16;
+	sysInfo->pllFwdDivA = temp ? temp : 16;
+	temp = (reg & PLLD_FWDVB_MASK) >> 8;
+	sysInfo->pllFwdDivB = temp ? temp: 8 ;
+	temp = (reg & PLLD_FBDV_MASK) >> 24;
+	sysInfo->pllFbkDiv = temp ? temp : 32;
+	lfdiv = reg & PLLD_LFBDV_MASK;
+
+	mfclk(clk_opbd, reg);
+	temp = (reg & OPBDDV_MASK) >> 24;
+	sysInfo->pllOpbDiv = temp ? temp : 4;
+
+	mfclk(clk_perd, reg);
+	temp = (reg & PERDV_MASK) >> 24;
+	sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+	mfclk(clk_primbd, reg);
+	temp = (reg & PRBDV_MASK) >> 24;
+	prbdv0 = temp ? temp : 8;
+
+	mfclk(clk_spcid, reg);
+	temp = (reg & SPCID_MASK) >> 24;
+	sysInfo->pllPciDiv = temp ? temp : 4;
+
+	/* Calculate 'M' based on feedback source */
+	mfsdr(sdr_sdstp0, reg);
+	temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+	if (temp == 0) { /* PLL output */
+		/* Figure which pll to use */
+		mfclk(clk_pllc, reg);
+		temp = (reg & PLLC_SRC_MASK) >> 29;
+		if (!temp) /* PLLOUTA */
+			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+		else       /* PLLOUTB */
+			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+	}
+	else if (temp == 1) /* CPU output */
+		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+	else /* PerClk */
+		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+	/* Now calculate the individual clocks */
+	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+	sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+	sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+
+	/* Figure which timer source to use */
+	if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+		temp = sysInfo->freqProcessor / 2;  /* Max extern clock speed */
+		if (CONFIG_SYS_CLK_FREQ > temp)
+			sysInfo->freqTmrClk = temp;
+		else
+			sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+	}
+	else  /* Internal clock */
+		sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+	sys_info_t sys_info;
+	get_sys_info (&sys_info);
+	return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440_GX)
 void get_sys_info (sys_info_t * sysInfo)
 {
 	unsigned long strp0;
@@ -220,8 +309,8 @@ void get_sys_info (sys_info_t * sysInfo)
 	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
 	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
 	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
-    if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
-	sysInfo->freqPLB >>= 1;
+	if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+		sysInfo->freqPLB >>= 1;
 	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
 	sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
 
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 3473baafc5..3a8ff2b02b 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -344,7 +344,7 @@ _start:
 	lis	r1,0x0002		/* set CE bit (Critical Exceptions) */
 	ori	r1,r1,0x1000		/* set ME bit (Machine Exceptions) */
 	mtmsr	r1			/* change MSR */
-#else
+#elif !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
 	bl	__440gx_msr_set
 	b	__440gx_msr_continue
 
@@ -377,6 +377,21 @@ __440gx_msr_continue:
 	/* Setup the internal SRAM */
 	/*----------------------------------------------------------------*/
 	li	r0,0
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	/* Clear Dcache to use as RAM */
+	lis     r3,CFG_INIT_RAM_ADDR@h
+	li      r4,CFG_INIT_RAM_END@l
+	rlwinm. r5,r4,0,27,31
+	rlwinm  r5,r4,27,5,31
+	beq	..d_ran
+	addi    r5,r5,0x0001
+..d_ran:
+	mtctr   r5
+..d_ag:
+	dcbz    r0,r3
+	addi    r3,r3,32
+	bdnz    ..d_ag
+#else
 #if defined (CONFIG_440_GX)
 	mtdcr   l2_cache_cfg,r0		/* Ensure L2 Cache is off */
 #endif
@@ -408,6 +423,7 @@ __440gx_msr_continue:
 	ori	r1,r1,0x0380		/* 8k rw */
 	mtdcr	isram0_sb0cr,r1
 #endif
+#endif
 
 	/*----------------------------------------------------------------*/
 	/* Setup the stack in internal SRAM */
@@ -957,7 +973,7 @@ invalidate_icache:
 invalidate_dcache:
 	addi	r6,0,0x0000		/* clear GPR 6 */
 	/* Do loop for # of dcache congruence classes. */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	lis     r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS for large sized cache */
 	ori     r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
 #else
@@ -983,7 +999,7 @@ flush_dcache:
 	mtdccr	r10
 
 	/* do loop for # of congruence classes. */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	lis     r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS: for large cache sizes */
 	ori     r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
 	lis     r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
@@ -1210,6 +1226,15 @@ ppcSync:
  */
 	.globl	relocate_code
 relocate_code:
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	dccci	0,0		            /* Invalidate data cache, now no longer our stack */
+	sync
+	addi    r1,r0,0x0000        /* Tlb entry #0 */
+	tlbre	r0,r1,0x0002		/* Read contents */
+	ori     r0,r0,0x0c00        /* Or in the inhibit, write through bit */
+	tlbwe   r0,r1,0x0002		/* Save it out */
+	isync
+#endif
 	mr	r1,  r3		/* Set new stack pointer		*/
 	mr	r9,  r4		/* Save copy of Init Data pointer	*/
 	mr	r10, r5		/* Save copy of Destination Address	*/
@@ -1433,7 +1458,7 @@ trap_reloc:
 #ifdef CONFIG_405EP
 ppc405ep_init:
 
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
 	/*
 	 * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
 	 * function) to support FPGA and NVRAM accesses below.
@@ -1513,7 +1538,7 @@ ppc405ep_init:
 #endif
 
 	addi    r3,0,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
 	/*
 	!-----------------------------------------------------------------------
 	! Check FPGA for PCI internal/external arbitration
@@ -1548,7 +1573,7 @@ ppc405ep_init:
 					  /* and CPU has been reset */
 					  /* so skip to next section */
 
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
 	/*
 	!-----------------------------------------------------------------------
 	! Read NVRAM to get value to write in PLLMR.
@@ -1583,7 +1608,7 @@ ppc405ep_init:
 	cmpi     cr0,0,r5,1             /* See if PLL is locked */
 	beq     pll_write
 ..no_pllset:
-#endif /* CONFIG_BUBINGA405EP */
+#endif /* CONFIG_BUBINGA */
 
 	addis   r3,0,PLLMR0_DEFAULT@h       /* PLLMR0 default value */
 	ori     r3,r3,PLLMR0_DEFAULT@l     /* */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
new file mode 100644
index 0000000000..d53909e4e2
--- /dev/null
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -0,0 +1,1642 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
+ *
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#include "usbdev.h"
+
+#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG	/* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define readl(a) (*((vu_long *)(a)))
+#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+#ifdef CONFIG_440_EP
+#define ohci_cpu_to_le16(x) (x)
+#define ohci_cpu_to_le32(x) (x)
+#else
+#define ohci_cpu_to_le16(x) swap_16(x)
+#define ohci_cpu_to_le32(x) swap_32(x)
+#endif
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect.  AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+	u32 temp = readl (&hc->regs->roothub.register); \
+	if (hc->flags & OHCI_QUIRK_AMD756) \
+		while (temp & mask) \
+			temp = readl (&hc->regs->roothub.register); \
+	temp; })
+
+static u32 roothub_a (struct ohci *hc)
+	{ return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+	{ return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+	{ return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+	int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+	int		i;
+	int		last;
+	struct td	* td;
+
+	last = urb->length - 1;
+	if (last >= 0) {
+		for (i = 0; i <= last; i++) {
+			td = urb->td[i];
+			if (td) {
+				td->usb_dev = NULL;
+				urb->td[i] = NULL;
+			}
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+	int transfer_len, struct devrequest * setup, char * str, int small)
+{
+	urb_priv_t * purb = &urb_priv;
+
+	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+			str,
+			sohci_get_current_frame_number (dev),
+			usb_pipedevice (pipe),
+			usb_pipeendpoint (pipe),
+			usb_pipeout (pipe)? 'O': 'I',
+			usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+				(usb_pipecontrol (pipe)? "CTRL": "BULK"),
+			purb->actual_length,
+			transfer_len, dev->status);
+#ifdef	OHCI_VERBOSE_DEBUG
+	if (!small) {
+		int i, len;
+
+		if (usb_pipecontrol (pipe)) {
+			printf (__FILE__ ": cmd(8):");
+			for (i = 0; i < 8 ; i++)
+				printf (" %02x", ((__u8 *) setup) [i]);
+			printf ("\n");
+		}
+		if (transfer_len > 0 && buffer) {
+			printf (__FILE__ ": data(%d/%d):",
+				purb->actual_length,
+				transfer_len);
+			len = usb_pipeout (pipe)?
+					transfer_len: purb->actual_length;
+			for (i = 0; i < 16 && i < len; i++)
+				printf (" %02x", ((__u8 *) buffer) [i]);
+			printf ("%s\n", i < len? "...": "");
+		}
+	}
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+	int i, j;
+	 __u32 * ed_p;
+	for (i= 0; i < 32; i++) {
+		j = 5;
+		ed_p = &(ohci->hcca->int_table [i]);
+		if (*ed_p == 0)
+		    continue;
+		printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+		while (*ed_p != 0 && j--) {
+			ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
+			printf (" ed: %4x;", ed->hwINFO);
+			ed_p = &ed->hwNextED;
+		}
+		printf ("\n");
+	}
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+	dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+		label,
+		mask,
+		(mask & OHCI_INTR_MIE) ? " MIE" : "",
+		(mask & OHCI_INTR_OC) ? " OC" : "",
+		(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+		(mask & OHCI_INTR_FNO) ? " FNO" : "",
+		(mask & OHCI_INTR_UE) ? " UE" : "",
+		(mask & OHCI_INTR_RD) ? " RD" : "",
+		(mask & OHCI_INTR_SF) ? " SF" : "",
+		(mask & OHCI_INTR_WDH) ? " WDH" : "",
+		(mask & OHCI_INTR_SO) ? " SO" : ""
+		);
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+	ed_t *edp = (ed_t *)value;
+
+	if (value) {
+		dbg ("%s %08x", label, value);
+		dbg ("%08x", edp->hwINFO);
+		dbg ("%08x", edp->hwTailP);
+		dbg ("%08x", edp->hwHeadP);
+		dbg ("%08x", edp->hwNextED);
+	}
+}
+
+static char * hcfs2string (int state)
+{
+	switch (state) {
+		case OHCI_USB_RESET:	return "reset";
+		case OHCI_USB_RESUME:	return "resume";
+		case OHCI_USB_OPER:	return "operational";
+		case OHCI_USB_SUSPEND:	return "suspend";
+	}
+	return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+	struct ohci_regs	*regs = controller->regs;
+	__u32			temp;
+
+	temp = readl (&regs->revision) & 0xff;
+	if (temp != 0x10)
+		dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+	temp = readl (&regs->control);
+	dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
+		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
+		(temp & OHCI_CTRL_IR) ? " IR" : "",
+		hcfs2string (temp & OHCI_CTRL_HCFS),
+		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
+		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
+		(temp & OHCI_CTRL_IE) ? " IE" : "",
+		(temp & OHCI_CTRL_PLE) ? " PLE" : "",
+		temp & OHCI_CTRL_CBSR
+		);
+
+	temp = readl (&regs->cmdstatus);
+	dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+		(temp & OHCI_SOC) >> 16,
+		(temp & OHCI_OCR) ? " OCR" : "",
+		(temp & OHCI_BLF) ? " BLF" : "",
+		(temp & OHCI_CLF) ? " CLF" : "",
+		(temp & OHCI_HCR) ? " HCR" : ""
+		);
+
+	ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
+	ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
+
+	maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
+
+	maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
+	maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
+
+	maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
+	maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
+
+	maybe_print_eds ("donehead", readl (&regs->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+	__u32			temp, ndp, i;
+
+	temp = roothub_a (controller);
+	ndp = (temp & RH_A_NDP);
+
+	if (verbose) {
+		dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+			((temp & RH_A_POTPGT) >> 24) & 0xff,
+			(temp & RH_A_NOCP) ? " NOCP" : "",
+			(temp & RH_A_OCPM) ? " OCPM" : "",
+			(temp & RH_A_DT) ? " DT" : "",
+			(temp & RH_A_NPS) ? " NPS" : "",
+			(temp & RH_A_PSM) ? " PSM" : "",
+			ndp
+			);
+		temp = roothub_b (controller);
+		dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+			temp,
+			(temp & RH_B_PPCM) >> 16,
+			(temp & RH_B_DR)
+			);
+		temp = roothub_status (controller);
+		dbg ("roothub.status: %08x%s%s%s%s%s%s",
+			temp,
+			(temp & RH_HS_CRWE) ? " CRWE" : "",
+			(temp & RH_HS_OCIC) ? " OCIC" : "",
+			(temp & RH_HS_LPSC) ? " LPSC" : "",
+			(temp & RH_HS_DRWE) ? " DRWE" : "",
+			(temp & RH_HS_OCI) ? " OCI" : "",
+			(temp & RH_HS_LPS) ? " LPS" : ""
+			);
+	}
+
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus (controller, i);
+		dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+			i,
+			temp,
+			(temp & RH_PS_PRSC) ? " PRSC" : "",
+			(temp & RH_PS_OCIC) ? " OCIC" : "",
+			(temp & RH_PS_PSSC) ? " PSSC" : "",
+			(temp & RH_PS_PESC) ? " PESC" : "",
+			(temp & RH_PS_CSC) ? " CSC" : "",
+
+			(temp & RH_PS_LSDA) ? " LSDA" : "",
+			(temp & RH_PS_PPS) ? " PPS" : "",
+			(temp & RH_PS_PRS) ? " PRS" : "",
+			(temp & RH_PS_POCI) ? " POCI" : "",
+			(temp & RH_PS_PSS) ? " PSS" : "",
+
+			(temp & RH_PS_PES) ? " PES" : "",
+			(temp & RH_PS_CCS) ? " CCS" : ""
+			);
+	}
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+	dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+	/* dumps some of the state we know about */
+	ohci_dump_status (controller);
+	if (verbose)
+		ep_print_int_eds (controller, "hcca");
+	dbg ("hcca frame #%04x", controller->hcca->frame_no);
+	ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup, int interval)
+{
+	ohci_t *ohci;
+	ed_t * ed;
+	urb_priv_t *purb_priv;
+	int i, size = 0;
+
+	ohci = &gohci;
+
+	/* when controller's hung, permit only roothub cleanup attempts
+	 * such as powering down ports */
+	if (ohci->disabled) {
+		err("sohci_submit_job: EPIPE");
+		return -1;
+	}
+
+	/* if we have an unfinished URB from previous transaction let's
+	 * fail and scream as quickly as possible so as not to corrupt
+	 * further communication */
+	if (!urb_finished) {
+		err("sohci_submit_job: URB NOT FINISHED");
+		return -1;
+	}
+	/* we're about to begin a new transaction here so mark the URB unfinished */
+	urb_finished = 0;
+
+	/* every endpoint has a ed, locate and fill it */
+	if (!(ed = ep_add_ed (dev, pipe))) {
+		err("sohci_submit_job: ENOMEM");
+		return -1;
+	}
+
+	/* for the private part of the URB we need the number of TDs (size) */
+	switch (usb_pipetype (pipe)) {
+		case PIPE_BULK: /* one TD for every 4096 Byte */
+			size = (transfer_len - 1) / 4096 + 1;
+			break;
+		case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+			size = (transfer_len == 0)? 2:
+						(transfer_len - 1) / 4096 + 3;
+			break;
+	}
+
+	if (size >= (N_URB_TD - 1)) {
+		err("need %d TDs, only have %d", size, N_URB_TD);
+		return -1;
+	}
+	purb_priv = &urb_priv;
+	purb_priv->pipe = pipe;
+
+	/* fill the private part of the URB */
+	purb_priv->length = size;
+	purb_priv->ed = ed;
+	purb_priv->actual_length = 0;
+
+	/* allocate the TDs */
+	/* note that td[0] was allocated in ep_add_ed */
+	for (i = 0; i < size; i++) {
+		purb_priv->td[i] = td_alloc (dev);
+		if (!purb_priv->td[i]) {
+			purb_priv->length = i;
+			urb_free_priv (purb_priv);
+			err("sohci_submit_job: ENOMEM");
+			return -1;
+		}
+	}
+
+	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+		urb_free_priv (purb_priv);
+		err("sohci_submit_job: EINVAL");
+		return -1;
+	}
+
+	/* link the ed into a chain if is not already */
+	if (ed->state != ED_OPER)
+		ep_link (ohci, ed);
+
+	/* fill the TDs and link it to the ed */
+	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+	ohci_t *ohci = &gohci;
+
+	return ohci_cpu_to_le16 (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+	volatile ed_t *ed = edi;
+
+	ed->state = ED_OPER;
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		ed->hwNextED = 0;
+		if (ohci->ed_controltail == NULL) {
+			writel (ed, &ohci->regs->ed_controlhead);
+		} else {
+			ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+		}
+		ed->ed_prev = ohci->ed_controltail;
+		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_CLE;
+			writel (ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_controltail = edi;
+		break;
+
+	case PIPE_BULK:
+		ed->hwNextED = 0;
+		if (ohci->ed_bulktail == NULL) {
+			writel (ed, &ohci->regs->ed_bulkhead);
+		} else {
+			ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+		}
+		ed->ed_prev = ohci->ed_bulktail;
+		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_BLE;
+			writel (ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_bulktail = edi;
+		break;
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+	volatile ed_t *ed = edi;
+
+	ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_CLE;
+				writel (ohci->hc_control, &ohci->regs->control);
+			}
+			writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_controltail == ed) {
+			ohci->ed_controltail = ed->ed_prev;
+		} else {
+			((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+		}
+		break;
+
+	case PIPE_BULK:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_BLE;
+				writel (ohci->hc_control, &ohci->regs->control);
+			}
+			writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_bulktail == ed) {
+			ohci->ed_bulktail = ed->ed_prev;
+		} else {
+			((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+		}
+		break;
+	}
+	ed->state = ED_UNLINK;
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless	so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+	td_t *td;
+	ed_t *ed_ret;
+	volatile ed_t *ed;
+
+	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+			(usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+		err("ep_add_ed: pending delete");
+		/* pending delete request */
+		return NULL;
+	}
+
+	if (ed->state == ED_NEW) {
+		ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
+		/* dummy td; end of td list for ed */
+		td = td_alloc (usb_dev);
+		ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
+		ed->hwHeadP = ed->hwTailP;
+		ed->state = ED_UNLINK;
+		ed->type = usb_pipetype (pipe);
+		ohci_dev.ed_cnt++;
+	}
+
+	ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
+			| usb_pipeendpoint (pipe) << 7
+			| (usb_pipeisoc (pipe)? 0x8000: 0)
+			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+			| usb_pipeslow (pipe) << 13
+			| usb_maxpacket (usb_dev, pipe) << 16);
+
+	return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+	void *data, int len,
+	struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+	volatile td_t  *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+	int i;
+#endif
+
+	if (index > urb_priv->length) {
+		err("index > length");
+		return;
+	}
+	/* use this td as the next dummy */
+	td_pt = urb_priv->td [index];
+	td_pt->hwNextTD = 0;
+
+	/* fill the old dummy TD */
+	td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
+
+	td->ed = urb_priv->ed;
+	td->next_dl_td = NULL;
+	td->index = index;
+	td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+	if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+		for (i = 0; i < len; i++)
+		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+		printf("\n");
+	}
+#endif
+	if (!len)
+		data = 0;
+
+	td->hwINFO = ohci_cpu_to_le32 (info);
+	td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
+	if (data)
+		td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
+	else
+		td->hwBE = 0;
+	td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
+
+	/* append to queue */
+	td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+	int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+	ohci_t *ohci = &gohci;
+	int data_len = transfer_len;
+	void *data;
+	int cnt = 0;
+	__u32 info = 0;
+	unsigned int toggle = 0;
+
+	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+		toggle = TD_T_TOGGLE;
+	} else {
+		toggle = TD_T_DATA0;
+		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+	}
+	urb->td_cnt = 0;
+	if (data_len)
+		data = buffer;
+	else
+		data = 0;
+
+	switch (usb_pipetype (pipe)) {
+	case PIPE_BULK:
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+		while(data_len > 4096) {
+			td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+			data += 4096; data_len -= 4096; cnt++;
+		}
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+		td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+		cnt++;
+
+		if (!ohci->sleeping)
+			writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+		break;
+
+	case PIPE_CONTROL:
+		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+		td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+		if (data_len > 0) {
+			info = usb_pipeout (pipe)?
+				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+			/* NOTE:  mishandles transfers >8K, some >4K */
+			td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+		}
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill (ohci, info, data, 0, dev, cnt++, urb);
+		if (!ohci->sleeping)
+			writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+		break;
+	}
+	if (urb->length != cnt)
+		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+	__u32 tdINFO, tdBE, tdCBP;
+	urb_priv_t *lurb_priv = &urb_priv;
+
+	tdINFO = ohci_cpu_to_le32 (td->hwINFO);
+	tdBE   = ohci_cpu_to_le32 (td->hwBE);
+	tdCBP  = ohci_cpu_to_le32 (td->hwCBP);
+
+
+	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+		if (tdBE != 0) {
+			if (td->hwCBP == 0)
+				lurb_priv->actual_length += tdBE - td->data + 1;
+			else
+				lurb_priv->actual_length += tdCBP - td->data;
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+	__u32 td_list_hc;
+	td_t *td_rev = NULL;
+	td_t *td_list = NULL;
+	urb_priv_t *lurb_priv = NULL;
+
+	td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
+	ohci->hcca->done_head = 0;
+
+	while (td_list_hc) {
+		td_list = (td_t *)td_list_hc;
+
+		if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
+			lurb_priv = &urb_priv;
+			dbg(" USB-error/status: %x : %p",
+					TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
+			if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
+				if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+					td_list->ed->hwHeadP =
+						(lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
+									(td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
+					lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+				} else
+					td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
+			}
+#ifdef CONFIG_MPC5200
+			td_list->hwNextTD = 0;
+#endif
+		}
+
+		td_list->next_dl_td = td_rev;
+		td_rev = td_list;
+		td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
+	}
+	return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+	td_t *td_list_next = NULL;
+	ed_t *ed;
+	int cc = 0;
+	int stat = 0;
+	/* urb_t *urb; */
+	urb_priv_t *lurb_priv;
+	__u32 tdINFO, edHeadP, edTailP;
+
+	while (td_list) {
+		td_list_next = td_list->next_dl_td;
+
+		lurb_priv = &urb_priv;
+		tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
+
+		ed = td_list->ed;
+
+		dl_transfer_length(td_list);
+
+		/* error code of transfer */
+		cc = TD_CC_GET (tdINFO);
+		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+			if ((ed->state & (ED_OPER | ED_UNLINK))
+					&& (lurb_priv->state != URB_DEL)) {
+				dbg("ConditionCode %#x", cc);
+				stat = cc_to_error[cc];
+				urb_finished = 1;
+			}
+		}
+
+		if (ed->state != ED_NEW) {
+			edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
+			edTailP = ohci_cpu_to_le32 (ed->hwTailP);
+
+			/* unlink eds if they are not busy */
+			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+				ep_unlink (ohci, ed);
+		}
+
+		td_list = td_list_next;
+	}
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+	0x12,	    /*	__u8  bLength; */
+	0x01,	    /*	__u8  bDescriptorType; Device */
+	0x10,	    /*	__u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  bDeviceSubClass; */
+	0x00,	    /*	__u8  bDeviceProtocol; */
+	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	    /*	__u16 idVendor; */
+	0x00,
+	0x00,	    /*	__u16 idProduct; */
+	0x00,
+	0x00,	    /*	__u16 bcdDevice; */
+	0x00,
+	0x00,	    /*	__u8  iManufacturer; */
+	0x01,	    /*	__u8  iProduct; */
+	0x00,	    /*	__u8  iSerialNumber; */
+	0x01	    /*	__u8  bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+	0x09,	    /*	__u8  bLength; */
+	0x02,	    /*	__u8  bDescriptorType; Configuration */
+	0x19,	    /*	__u16 wTotalLength; */
+	0x00,
+	0x01,	    /*	__u8  bNumInterfaces; */
+	0x01,	    /*	__u8  bConfigurationValue; */
+	0x00,	    /*	__u8  iConfiguration; */
+	0x40,	    /*	__u8  bmAttributes;
+		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+	0x00,	    /*	__u8  MaxPower; */
+
+	/* interface */
+	0x09,	    /*	__u8  if_bLength; */
+	0x04,	    /*	__u8  if_bDescriptorType; Interface */
+	0x00,	    /*	__u8  if_bInterfaceNumber; */
+	0x00,	    /*	__u8  if_bAlternateSetting; */
+	0x01,	    /*	__u8  if_bNumEndpoints; */
+	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  if_bInterfaceSubClass; */
+	0x00,	    /*	__u8  if_bInterfaceProtocol; */
+	0x00,	    /*	__u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,	    /*	__u8  ep_bLength; */
+	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
+	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
+	0x02,	    /*	__u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x00,
+	0xff	    /*	__u8  ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+	0x04,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	0x09,			/*  __u8  lang ID */
+	0x04,			/*  __u8  lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+	28,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	'O',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'C',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'I',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'R',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	't',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'u',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'b',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x)			len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x)		{info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x)		writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x)	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT		roothub_status(&gohci)
+#define RD_RH_PORTSTAT		roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+	__u32 temp, ndp, i;
+	int res;
+
+	res = -1;
+	temp = roothub_a (controller);
+	ndp = (temp & RH_A_NDP);
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus (controller, i);
+		/* check for a device disconnect */
+		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+			(RH_PS_PESC | RH_PS_CSC)) &&
+			((temp & RH_PS_CCS) == 0)) {
+			res = i;
+			break;
+		}
+	}
+	return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+		void *buffer, int transfer_len, struct devrequest *cmd)
+{
+	void * data = buffer;
+	int leni = transfer_len;
+	int len = 0;
+	int stat = 0;
+	__u32 datab[4];
+	__u8 *data_buf = (__u8 *)datab;
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#endif
+	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+		info("Root-Hub submit IRQ: NOT implemented");
+		return 0;
+	}
+
+	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
+	wValue	      = m16_swap (cmd->value);
+	wIndex	      = m16_swap (cmd->index);
+	wLength	      = m16_swap (cmd->length);
+
+	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+	switch (bmRType_bReq) {
+	/* Request Destination:
+	   without flags: Device,
+	   RH_INTERFACE: interface,
+	   RH_ENDPOINT: endpoint,
+	   RH_CLASS means HUB here,
+	   RH_OTHER | RH_CLASS	almost ever means HUB_PORT here
+	*/
+
+	case RH_GET_STATUS:
+			*(__u16 *) data_buf = m16_swap (1); OK (2);
+	case RH_GET_STATUS | RH_INTERFACE:
+			*(__u16 *) data_buf = m16_swap (0); OK (2);
+	case RH_GET_STATUS | RH_ENDPOINT:
+			*(__u16 *) data_buf = m16_swap (0); OK (2);
+	case RH_GET_STATUS | RH_CLASS:
+			*(__u32 *) data_buf = m32_swap (
+				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+			OK (4);
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+			*(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+		switch (wValue) {
+			case (RH_ENDPOINT_STALL): OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		switch (wValue) {
+			case RH_C_HUB_LOCAL_POWER:
+				OK(0);
+			case (RH_C_HUB_OVER_CURRENT):
+					WR_RH_STAT(RH_HS_OCIC); OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+			case (RH_PORT_ENABLE):
+					WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+			case (RH_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+			case (RH_PORT_POWER):
+					WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+			case (RH_C_PORT_CONNECTION):
+					WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+			case (RH_C_PORT_ENABLE):
+					WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+			case (RH_C_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+			case (RH_C_PORT_OVER_CURRENT):
+					WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+			case (RH_C_PORT_RESET):
+					WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+		}
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+			case (RH_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+			case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+					if (RD_RH_PORTSTAT & RH_PS_CCS)
+					    WR_RH_PORTSTAT (RH_PS_PRS);
+					OK (0);
+			case (RH_PORT_POWER):
+					WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+			case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+					if (RD_RH_PORTSTAT & RH_PS_CCS)
+					    WR_RH_PORTSTAT (RH_PS_PES );
+					OK (0);
+		}
+		break;
+
+	case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+	case RH_GET_DESCRIPTOR:
+		switch ((wValue & 0xff00) >> 8) {
+			case (0x01): /* device descriptor */
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof (root_hub_dev_des),
+					      wLength));
+				data_buf = root_hub_dev_des; OK(len);
+			case (0x02): /* configuration descriptor */
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof (root_hub_config_des),
+					      wLength));
+				data_buf = root_hub_config_des; OK(len);
+			case (0x03): /* string descriptors */
+				if(wValue==0x0300) {
+					len = min_t(unsigned int,
+						  leni,
+						  min_t(unsigned int,
+						      sizeof (root_hub_str_index0),
+						      wLength));
+					data_buf = root_hub_str_index0;
+					OK(len);
+				}
+				if(wValue==0x0301) {
+					len = min_t(unsigned int,
+						  leni,
+						  min_t(unsigned int,
+						      sizeof (root_hub_str_index1),
+						      wLength));
+					data_buf = root_hub_str_index1;
+					OK(len);
+			}
+			default:
+				stat = USB_ST_STALLED;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+	    {
+		    __u32 temp = roothub_a (&gohci);
+
+		    data_buf [0] = 9;		/* min length; */
+		    data_buf [1] = 0x29;
+		    data_buf [2] = temp & RH_A_NDP;
+		    data_buf [3] = 0;
+		    if (temp & RH_A_PSM)	/* per-port power switching? */
+			data_buf [3] |= 0x1;
+		    if (temp & RH_A_NOCP)	/* no overcurrent reporting? */
+			data_buf [3] |= 0x10;
+		    else if (temp & RH_A_OCPM)	/* per-port overcurrent reporting? */
+			data_buf [3] |= 0x8;
+
+		    /* corresponds to data_buf[4-7] */
+		    datab [1] = 0;
+		    data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+		    temp = roothub_b (&gohci);
+		    data_buf [7] = temp & RH_B_DR;
+		    if (data_buf [2] < 7) {
+			data_buf [8] = 0xff;
+		    } else {
+			data_buf [0] += 2;
+			data_buf [8] = (temp & RH_B_DR) >> 8;
+			data_buf [10] = data_buf [9] = 0xff;
+		    }
+
+		    len = min_t(unsigned int, leni,
+			      min_t(unsigned int, data_buf [0], wLength));
+		    OK (len);
+		}
+
+	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK (1);
+
+	case RH_SET_CONFIGURATION:	WR_RH_STAT (0x10000); OK (0);
+
+	default:
+		dbg ("unsupported root hub command");
+		stat = USB_ST_STALLED;
+	}
+
+#ifdef	DEBUG
+	ohci_dump_roothub (&gohci, 1);
+#endif
+
+	len = min_t(int, len, leni);
+	if (data != data_buf)
+	    memcpy (data, data_buf, len);
+	dev->act_len = len;
+	dev->status = stat;
+
+#ifdef DEBUG
+	if (transfer_len)
+		urb_priv.actual_length = transfer_len;
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#endif
+
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup, int interval)
+{
+	int stat = 0;
+	int maxsize = usb_maxpacket(dev, pipe);
+	int timeout;
+
+	/* device pulled? Shortcut the action. */
+	if (devgone == dev) {
+		dev->status = USB_ST_CRC_ERR;
+		return 0;
+	}
+
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+	if (!maxsize) {
+		err("submit_common_message: pipesize for pipe %lx is zero",
+			pipe);
+		return -1;
+	}
+
+	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+		err("sohci_submit_job failed");
+		return -1;
+	}
+
+	/* allow more time for a BULK device to react - some are slow */
+#define BULK_TO	 5000	/* timeout in milliseconds */
+	if (usb_pipetype (pipe) == PIPE_BULK)
+		timeout = BULK_TO;
+	else
+		timeout = 100;
+
+	/* wait for it to complete */
+	for (;;) {
+		/* check whether the controller is done */
+		stat = hc_interrupt();
+		if (stat < 0) {
+			stat = USB_ST_CRC_ERR;
+			break;
+		}
+
+		/* NOTE: since we are not interrupt driven in U-Boot and always
+		 * handle only one URB at a time, we cannot assume the
+		 * transaction finished on the first successful return from
+		 * hc_interrupt().. unless the flag for current URB is set,
+		 * meaning that all TD's to/from device got actually
+		 * transferred and processed. If the current URB is not
+		 * finished we need to re-iterate this loop so as
+		 * hc_interrupt() gets called again as there needs to be some
+		 * more TD's to process still */
+		if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+			/* 0xff is returned for an SF-interrupt */
+			break;
+		}
+
+		if (--timeout) {
+			wait_ms(1);
+			if (!urb_finished)
+				dbg("\%");
+
+		} else {
+			err("CTL:TIMEOUT ");
+			dbg("submit_common_msg: TO status %x\n", stat);
+			stat = USB_ST_CRC_ERR;
+			urb_finished = 1;
+			break;
+		}
+	}
+#if 0
+	/* we got an Root Hub Status Change interrupt */
+	if (got_rhsc) {
+#ifdef DEBUG
+		ohci_dump_roothub (&gohci, 1);
+#endif
+		got_rhsc = 0;
+		/* abuse timeout */
+		timeout = rh_check_port_status(&gohci);
+		if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+			/* the called routine adds 1 to the passed value */
+			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+			/*
+			 * XXX
+			 * This is potentially dangerous because it assumes
+			 * that only one device is ever plugged in!
+			 */
+			devgone = dev;
+		}
+	}
+#endif
+
+	dev->status = stat;
+	dev->act_len = transfer_len;
+
+#ifdef DEBUG
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#endif
+
+	/* free TDs in urb_priv */
+	urb_free_priv (&urb_priv);
+	return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len)
+{
+	info("submit_bulk_msg");
+	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup)
+{
+	int maxsize = usb_maxpacket(dev, pipe);
+
+	info("submit_control_msg");
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+	if (!maxsize) {
+		err("submit_control_message: pipesize for pipe %lx is zero",
+			pipe);
+		return -1;
+	}
+	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+		gohci.rh.dev = dev;
+		/* root hub - redirect */
+		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+			setup);
+	}
+
+	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, int interval)
+{
+	info("submit_int_msg");
+	return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+	int timeout = 30;
+	int smm_timeout = 50; /* 0,5 sec */
+
+	if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+		writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+		info("USB HC TakeOver from SMM");
+		while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+			wait_ms (10);
+			if (--smm_timeout == 0) {
+				err("USB HC TakeOver failed!");
+				return -1;
+			}
+		}
+	}
+
+	/* Disable HC interrupts */
+	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+		ohci->slot_name,
+		readl (&ohci->regs->control));
+
+	/* Reset USB (needed by some controllers) */
+	ohci->hc_control = 0;
+	writel (ohci->hc_control, &ohci->regs->control);
+
+	/* HC Reset requires max 10 us delay */
+	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
+	while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+		if (--timeout == 0) {
+			err("USB HC reset timed out!");
+			return -1;
+		}
+		udelay (1);
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+	__u32 mask;
+	unsigned int fminterval;
+
+	ohci->disabled = 1;
+
+	/* Tell the controller where the control and bulk lists are
+	 * The lists are empty now. */
+
+	writel (0, &ohci->regs->ed_controlhead);
+	writel (0, &ohci->regs->ed_bulkhead);
+
+	writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+	fminterval = 0x2edf;
+	writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+	writel (fminterval, &ohci->regs->fminterval);
+	writel (0x628, &ohci->regs->lsthresh);
+
+	/* start controller operations */
+	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci->disabled = 0;
+	writel (ohci->hc_control, &ohci->regs->control);
+
+	/* disable all interrupts */
+	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+			OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+			OHCI_INTR_OC | OHCI_INTR_MIE);
+	writel (mask, &ohci->regs->intrdisable);
+	/* clear all interrupts */
+	mask &= ~OHCI_INTR_MIE;
+	writel (mask, &ohci->regs->intrstatus);
+	/* Choose the interrupts we care about now  - but w/o MIE */
+	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+	writel (mask, &ohci->regs->intrenable);
+
+#ifdef	OHCI_USE_NPS
+	/* required for AMD-756 and some Mac platforms */
+	writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+		&ohci->regs->roothub.a);
+	writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif	/* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+	/* POTPGT delay is bits 24-31, in 2 ms units. */
+	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+	/* connect the virtual root hub */
+	ohci->rh.devnum = 0;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+	ohci_t *ohci = &gohci;
+	struct ohci_regs *regs = ohci->regs;
+	int ints;
+	int stat = -1;
+
+	if ((ohci->hcca->done_head != 0) &&
+	     !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
+
+		ints =  OHCI_INTR_WDH;
+
+	} else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
+		ohci->disabled++;
+		err ("%s device removed!", ohci->slot_name);
+		return -1;
+
+	} else if ((ints &= readl (&regs->intrenable)) == 0) {
+		dbg("hc_interrupt: returning..\n");
+		return 0xff;
+	}
+
+	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+	if (ints & OHCI_INTR_RHSC) {
+		got_rhsc = 1;
+		stat = 0xff;
+	}
+
+	if (ints & OHCI_INTR_UE) {
+		ohci->disabled++;
+		err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+			ohci->slot_name);
+		/* e.g. due to PCI Master/Target Abort */
+
+#ifdef	DEBUG
+		ohci_dump (ohci, 1);
+#endif
+		/* FIXME: be optimistic, hope that bug won't repeat often. */
+		/* Make some non-interrupt context restart the controller. */
+		/* Count and limit the retries though; either hardware or */
+		/* software errors can go forever... */
+		hc_reset (ohci);
+		return -1;
+	}
+
+	if (ints & OHCI_INTR_WDH) {
+		writel (OHCI_INTR_WDH, &regs->intrdisable);
+		stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+		writel (OHCI_INTR_WDH, &regs->intrenable);
+	}
+
+	if (ints & OHCI_INTR_SO) {
+		dbg("USB Schedule overrun\n");
+		writel (OHCI_INTR_SO, &regs->intrenable);
+		stat = -1;
+	}
+
+	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
+	if (ints & OHCI_INTR_SF) {
+		unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
+		wait_ms(1);
+		writel (OHCI_INTR_SF, &regs->intrdisable);
+		if (ohci->ed_rm_list[frame] != NULL)
+			writel (OHCI_INTR_SF, &regs->intrenable);
+		stat = 0xff;
+	}
+
+	writel (ints, &regs->intrstatus);
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+	dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+	if (!ohci->disabled)
+		hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+	memset (&gohci, 0, sizeof (ohci_t));
+	memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+	/* align the storage */
+	if ((__u32)&ghcca[0] & 0xff) {
+		err("HCCA not aligned!!");
+		return -1;
+	}
+	phcca = &ghcca[0];
+	info("aligned ghcca %p", phcca);
+	memset(&ohci_dev, 0, sizeof(struct ohci_device));
+	if ((__u32)&ohci_dev.ed[0] & 0x7) {
+		err("EDs not aligned!!");
+		return -1;
+	}
+	memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+	if ((__u32)gtd & 0x7) {
+		err("TDs not aligned!!");
+		return -1;
+	}
+	ptd = gtd;
+	gohci.hcca = phcca;
+	memset (phcca, 0, sizeof (struct ohci_hcca));
+
+	gohci.disabled = 1;
+	gohci.sleeping = 0;
+	gohci.irq = -1;
+	gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+
+	gohci.flags = 0;
+	gohci.slot_name = "ppc440";
+
+	if (hc_reset (&gohci) < 0) {
+		hc_release_ohci (&gohci);
+		return -1;
+	}
+
+	if (hc_start (&gohci) < 0) {
+		err ("can't start usb-%s", gohci.slot_name);
+		hc_release_ohci (&gohci);
+		return -1;
+	}
+
+#ifdef	DEBUG
+	ohci_dump (&gohci, 1);
+#endif
+	ohci_inited = 1;
+	urb_finished = 1;
+
+	/* init the device driver */
+	usb_dev_init();
+
+	return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+	/* this gets called really early - before the controller has */
+	/* even been initialized! */
+	if (!ohci_inited)
+		return 0;
+	/* TODO release any interrupts, etc. */
+	/* call hc_release_ohci() here ? */
+	hc_reset (&gohci);
+	return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/ppc4xx/usb_ohci.h b/cpu/ppc4xx/usb_ohci.h
new file mode 100644
index 0000000000..706e05ea21
--- /dev/null
+++ b/cpu/ppc4xx/usb_ohci.h
@@ -0,0 +1,410 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+	/* No  Error  */ 0,
+	/* CRC Error  */ USB_ST_CRC_ERR,
+	/* Bit Stuff  */ USB_ST_BIT_ERR,
+	/* Data Togg  */ USB_ST_CRC_ERR,
+	/* Stall      */ USB_ST_STALLED,
+	/* DevNotResp */ -1,
+	/* PIDCheck   */ USB_ST_BIT_ERR,
+	/* UnExpPID   */ USB_ST_BIT_ERR,
+	/* DataOver   */ USB_ST_BUF_ERR,
+	/* DataUnder  */ USB_ST_BUF_ERR,
+	/* reservd    */ -1,
+	/* reservd    */ -1,
+	/* BufferOver */ USB_ST_BUF_ERR,
+	/* BuffUnder  */ USB_ST_BUF_ERR,
+	/* Not Access */ -1,
+	/* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW		0x00
+#define ED_UNLINK	0x01
+#define ED_OPER		0x02
+#define ED_DEL		0x04
+#define ED_URB_DEL	0x08
+
+/* usb_ohci_ed */
+struct ed {
+	__u32 hwINFO;
+	__u32 hwTailP;
+	__u32 hwHeadP;
+	__u32 hwNextED;
+
+	struct ed *ed_prev;
+	__u8 int_period;
+	__u8 int_branch;
+	__u8 int_load;
+	__u8 int_interval;
+	__u8 state;
+	__u8 type;
+	__u16 last_iso;
+	struct ed *ed_rm_list;
+
+	struct usb_device *usb_dev;
+	__u32 unused[3];
+} __attribute((aligned(16)));
+typedef struct ed ed_t;
+
+/* TD info field */
+#define TD_CC	    0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC	    0x0C000000
+#define TD_T	    0x03000000
+#define TD_T_DATA0  0x02000000
+#define TD_T_DATA1  0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R	    0x00040000
+#define TD_DI	    0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP	    0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN    0x00100000
+#define TD_DP_OUT   0x00080000
+
+#define TD_ISO	    0x00010000
+#define TD_DEL	    0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR	   0x00
+#define TD_CC_CRC	   0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL	   0x04
+#define TD_DEVNOTRESP	   0x05
+#define TD_PIDCHECKFAIL	   0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN	   0x08
+#define TD_DATAUNDERRUN	   0x09
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+#define TD_NOTACCESSED	   0x0F
+
+#define MAXPSW 1
+
+struct td {
+	__u32 hwINFO;
+	__u32 hwCBP;		/* Current Buffer Pointer */
+	__u32 hwNextTD;		/* Next TD Pointer */
+	__u32 hwBE;		/* Memory Buffer End Pointer */
+
+	__u16 hwPSW[MAXPSW];
+	__u8 unused;
+	__u8 index;
+	struct ed *ed;
+	struct td *next_dl_td;
+	struct usb_device *usb_dev;
+	int transfer_len;
+	__u32 data;
+
+	__u32 unused2[2];
+} __attribute((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP	(1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of.  It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32		/* part of the OHCI standard */
+struct ohci_hcca {
+	__u32 int_table[NUM_INTS];	/* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+	__u16 pad1;		/* set to 0 on each frame_no change */
+	__u16 frame_no;		/* current frame number */
+#else
+	__u16 frame_no;		/* current frame number */
+	__u16 pad1;		/* set to 0 on each frame_no change */
+#endif
+	__u32 done_head;	/* info returned for an interrupt */
+	u8 reserved_for_hc[116];
+} __attribute((aligned(256)));
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region.  This is Memory Mapped I/O.	You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+	/* control and status registers */
+	__u32 revision;
+	__u32 control;
+	__u32 cmdstatus;
+	__u32 intrstatus;
+	__u32 intrenable;
+	__u32 intrdisable;
+	/* memory pointers */
+	__u32 hcca;
+	__u32 ed_periodcurrent;
+	__u32 ed_controlhead;
+	__u32 ed_controlcurrent;
+	__u32 ed_bulkhead;
+	__u32 ed_bulkcurrent;
+	__u32 donehead;
+	/* frame counters */
+	__u32 fminterval;
+	__u32 fmremaining;
+	__u32 fmnumber;
+	__u32 periodicstart;
+	__u32 lsthresh;
+	/* Root hub ports */
+	struct ohci_roothub_regs {
+		__u32 a;
+		__u32 b;
+		__u32 status;
+		__u32 portstatus[MAX_ROOT_PORTS];
+	} roothub;
+} __attribute((aligned(32)));
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
+#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
+#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
+#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
+#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_CLF	(1 << 1)	/* control list filled */
+#define OHCI_BLF	(1 << 2)	/* bulk list filled */
+#define OHCI_OCR	(1 << 3)	/* ownership change request */
+#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+	int devnum;		/* Address of Root Hub endpoint */
+	void *dev;		/* was urb */
+	void *int_addr;
+	int send;
+	int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE		   0x01
+#define RH_ENDPOINT		   0x02
+#define RH_OTHER		   0x03
+
+#define RH_CLASS		   0x20
+#define RH_VENDOR		   0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS		0x0080
+#define RH_CLEAR_FEATURE	0x0100
+#define RH_SET_FEATURE		0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR	0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE		0x0280
+#define RH_GET_INTERFACE	0x0A80
+#define RH_SET_INTERFACE	0x0B00
+#define RH_SYNC_FRAME		0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP		0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION	   0x00
+#define RH_PORT_ENABLE		   0x01
+#define RH_PORT_SUSPEND		   0x02
+#define RH_PORT_OVER_CURRENT	   0x03
+#define RH_PORT_RESET		   0x04
+#define RH_PORT_POWER		   0x08
+#define RH_PORT_LOW_SPEED	   0x09
+
+#define RH_C_PORT_CONNECTION	   0x10
+#define RH_C_PORT_ENABLE	   0x11
+#define RH_C_PORT_SUSPEND	   0x12
+#define RH_C_PORT_OVER_CURRENT	   0x13
+#define RH_C_PORT_RESET		   0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER	   0x00
+#define RH_C_HUB_OVER_CURRENT	   0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP	   0x00
+#define RH_ENDPOINT_STALL	   0x01
+
+#define RH_ACK			   0x01
+#define RH_REQ_ERR		   -1
+#define RH_NACK			   0x00
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS	     0x00000001	/* current connect status */
+#define RH_PS_PES	     0x00000002	/* port enable status */
+#define RH_PS_PSS	     0x00000004	/* port suspend status */
+#define RH_PS_POCI	     0x00000008	/* port over current indicator */
+#define RH_PS_PRS	     0x00000010	/* port reset status */
+#define RH_PS_PPS	     0x00000100	/* port power status */
+#define RH_PS_LSDA	     0x00000200	/* low speed device attached */
+#define RH_PS_CSC	     0x00010000	/* connect status change */
+#define RH_PS_PESC	     0x00020000	/* port enable status change */
+#define RH_PS_PSSC	     0x00040000	/* port suspend status change */
+#define RH_PS_OCIC	     0x00080000	/* over current indicator change */
+#define RH_PS_PRSC	     0x00100000	/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	     0x00000001	/* local power status */
+#define RH_HS_OCI	     0x00000002	/* over current indicator */
+#define RH_HS_DRWE	     0x00008000	/* device remote wakeup enable */
+#define RH_HS_LPSC	     0x00010000	/* local power status change */
+#define RH_HS_OCIC	     0x00020000	/* over current indicator change */
+#define RH_HS_CRWE	     0x80000000	/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff	/* device removable flags */
+#define RH_B_PPCM	0xffff0000	/* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP	(0xff << 0)	/* number of downstream ports */
+#define RH_A_PSM	(1 << 8)	/* power switching mode */
+#define RH_A_NPS	(1 << 9)	/* no power switching */
+#define RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define RH_A_OCPM	(1 << 11)	/* over current protection mode */
+#define RH_A_NOCP	(1 << 12)	/* no over current protection */
+#define RH_A_POTPGT	(0xff << 24)	/* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct {
+	ed_t *ed;
+	__u16 length;		/* number of tds associated with this request */
+	__u16 td_cnt;		/* number of tds already serviced */
+	int state;
+	unsigned long pipe;
+	int actual_length;
+	td_t *td[N_URB_TD];	/* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+typedef struct ohci {
+	struct ohci_hcca *hcca;	/* hcca */
+	/*dma_addr_t hcca_dma; */
+
+	int irq;
+	int disabled;		/* e.g. got a UE, we're hung */
+	int sleeping;
+	unsigned long flags;	/* for HC bugs */
+
+	struct ohci_regs *regs;	/* OHCI controller's memory */
+
+	ed_t *ed_rm_list[2];	/* lists of all endpoints to be removed */
+	ed_t *ed_bulktail;	/* last endpoint of bulk list */
+	ed_t *ed_controltail;	/* last endpoint of control list */
+	int intrstatus;
+	__u32 hc_control;	/* copy of the hc control reg */
+	struct usb_device *dev[32];
+	struct virt_root_hub rh;
+
+	const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+	ed_t ed[NUM_EDS];
+	int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD + 1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *td_alloc(struct usb_device *usb_dev)
+{
+	int i;
+	struct td *td;
+
+	td = NULL;
+	for (i = 0; i < NUM_TD; i++) {
+		if (ptd[i].usb_dev == NULL) {
+			td = &ptd[i];
+			td->usb_dev = usb_dev;
+			break;
+		}
+	}
+
+	return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+	ed->usb_dev = NULL;
+}
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
new file mode 100644
index 0000000000..f0901ac518
--- /dev/null
+++ b/cpu/ppc4xx/usbdev.c
@@ -0,0 +1,214 @@
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_440_EP
+
+#include <usb.h>
+#include "usbdev.h"
+#include "vecnum.h"
+
+#define USB_DT_DEVICE        0x01
+#define USB_DT_CONFIG        0x02
+#define USB_DT_STRING        0x03
+#define USB_DT_INTERFACE     0x04
+#define USB_DT_ENDPOINT      0x05
+
+unsigned char set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+	/*will hold the packet received */
+	struct usb_device_descriptor usb_device_packet;
+	struct usb_config_descriptor usb_config_packet;
+	struct usb_string_descriptor usb_string_packet;
+	struct devrequest setup_packet;
+	unsigned int *setup_packet_pt;
+	unsigned char *packet_pt;
+	int temp, temp1;
+
+	int i;
+
+	/*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+	/*set usb address, seems to not work unless it is done in the next
+	   interrupt, so that is why it is done this way */
+	if (set_value != -1)
+		*(unsigned char *)USB2D0_FADDR_8 = set_value;
+
+	/*endpoint 1 */
+	if (usb2d0_intrin & 0x01) {
+		setup_packet_pt = (unsigned int *)&setup_packet;
+
+		/*copy packet */
+		setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+		setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+		temp = *(unsigned int *)USB2D0_FIFO_0;
+		temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+		/*do some swapping */
+		setup_packet.value = swap_16(setup_packet.value);
+		setup_packet.index = swap_16(setup_packet.index);
+		setup_packet.length = swap_16(setup_packet.length);
+
+		/*clear rx packet */
+		*(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+		/*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+		   setup_packet.request, setup_packet.value,
+		   setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+		switch (setup_packet.request) {
+		case USB_REQ_GET_DESCRIPTOR:
+
+			switch (setup_packet.value >> 8) {
+			case USB_DT_DEVICE:
+				/*create packet */
+				usb_device_packet.bLength = 18;
+				usb_device_packet.bDescriptorType =
+				    USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+				usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+				usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+				usb_device_packet.bDeviceClass = 0xff;
+				usb_device_packet.bDeviceSubClass = 0;
+				usb_device_packet.bDeviceProtocol = 0;
+				usb_device_packet.bMaxPacketSize0 = 32;
+				usb_device_packet.idVendor = swap_16(1);
+				usb_device_packet.idProduct = swap_16(2);
+				usb_device_packet.bcdDevice = swap_16(0x300);
+				usb_device_packet.iManufacturer = 1;
+				usb_device_packet.iProduct = 1;
+				usb_device_packet.iSerialNumber = 1;
+				usb_device_packet.bNumConfigurations = 1;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_device_packet;
+				break;
+
+			case USB_DT_CONFIG:
+				/*create packet */
+				usb_config_packet.bLength = 9;
+				usb_config_packet.bDescriptorType =
+				    USB_DT_CONFIG;
+				usb_config_packet.wTotalLength = swap_16(25);
+				usb_config_packet.bNumInterfaces = 1;
+				usb_config_packet.bConfigurationValue = 1;
+				usb_config_packet.iConfiguration = 0;
+				usb_config_packet.bmAttributes = 0x40;
+				usb_config_packet.MaxPower = 0;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_config_packet;
+				break;
+
+			case USB_DT_STRING:
+				/*create packet */
+				usb_string_packet.bLength = 2;
+				usb_string_packet.bDescriptorType =
+				    USB_DT_STRING;
+				usb_string_packet.wData[0] = 0x0094;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_string_packet;
+				break;
+			}
+
+			/*put packet in fifo */
+			for (i = 0; i < (setup_packet.length); i++) {
+				*(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+			}
+
+			/*give tx command */
+			*(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+
+			/*copy usb address */
+			set_value = setup_packet.value;
+
+			break;
+		}
+
+	}
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+	/*check for sof */
+	if (usb2d0_intrusb & 0x08) {
+		/*printf("{USB device} - sof detected\n"); */
+	}
+
+	/*check for reset */
+	if (usb2d0_intrusb & 0x04) {
+		/*printf("{USB device} - reset detected\n"); */
+
+		/*copy usb address of zero, need to do this when usb reset */
+		set_value = 0;
+	}
+
+	if (usb2d0_intrusb & 0x02) {
+		/*printf("{USB device} - resume detected\n"); */
+	}
+
+	if (usb2d0_intrusb & 0x01) {
+		/*printf("{USB device} - suspend detected\n"); */
+	}
+}
+
+int usbInt(void)
+{
+	/*Must read these 2 registers and use values to clear interrupts.  If you
+	   do not read them then the interrupt will not be cleared.  If you do not
+	   use the variable the optimizer will not do a read. */
+	volatile unsigned short usb2d0_intrin =
+	    *(unsigned short *)USB2D0_INTRIN_16;
+	volatile unsigned char usb2d0_intrusb =
+	    *(unsigned char *)USB2D0_INTRUSB_8;
+
+	/*check if there was an endpoint interrupt */
+	if (usb2d0_intrin != 0) {
+		process_endpoints(usb2d0_intrin);
+	}
+
+	/*check for other interrupts */
+	if (usb2d0_intrusb != 0) {
+		process_other(usb2d0_intrusb);
+	}
+
+	return 0;
+}
+
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+	printf("USB 2.0 Device init\n");
+	/*select 2.0 device */
+	mtsdr(sdr_usb0, 0x0);	/* 2.0 */
+
+	/*usb dev init */
+	*(unsigned char *)USB2D0_POWER_8 = 0xa1;	/* 2.0 */
+#else
+	printf("USB 1.1 Device init\n");
+	/*select 1.1 device */
+	mtsdr(sdr_usb0, 0x2);	/* 1.1 */
+
+	/*usb dev init */
+	*(unsigned char *)USB2D0_POWER_8 = 0xc0;	/* 1.1 */
+#endif
+
+	/*enable interrupts */
+	*(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+	irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+			    NULL);
+}
+
+#endif				/*CONFIG_440_EP */
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
new file mode 100644
index 0000000000..3446d9893d
--- /dev/null
+++ b/cpu/ppc4xx/usbdev.h
@@ -0,0 +1,31 @@
+#include <config.h>
+
+/*Common Registers*/
+#define USB2D0_INTRIN_16   (CFG_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8     (CFG_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8     (CFG_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16  (CFG_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16  (CFG_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8  (CFG_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8   (CFG_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CFG_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8   (CFG_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8     (CFG_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16    (CFG_USB_DEVICE | 0x10e)
+
+/*Indexed Registers*/
+#define USB2D0_INCSR0_8    (CFG_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16    (CFG_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16   (CFG_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16   (CFG_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16  (CFG_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CFG_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CFG_USB_DEVICE | 0x11a)
+
+/*FIFOs*/
+#define USB2D0_FIFO_0 (CFG_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CFG_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CFG_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CFG_USB_DEVICE | 0x12c)
+
+void usb_dev_init(void);
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index d493a5dd8f..1038975a2d 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -69,6 +69,7 @@
 #define VECNUM_MS           (32 + 0 )   /* MAL SERR                     */
 #define VECNUM_TXDE         (32 + 1 )   /* MAL TXDE                     */
 #define VECNUM_RXDE         (32 + 2 )   /* MAL RXDE                     */
+#define VECNUM_USBDEV	    (32 + 23)   /* USB 1.1/USB 2.0 Device       */
 #define VECNUM_ETH0         (32 + 28)   /* Ethernet 0 interrupt status  */
 #define VECNUM_EWU0         (32 + 29)   /* Ethernet 0 wakeup            */
 
diff --git a/doc/README.AMCC-eval-boards-cleanup b/doc/README.AMCC-eval-boards-cleanup
new file mode 100644
index 0000000000..901bd875c6
--- /dev/null
+++ b/doc/README.AMCC-eval-boards-cleanup
@@ -0,0 +1,31 @@
+---------------------------------------------------------------------
+Cleanup of AMCC eval boards (Walnut/Sycamore, Bubinga, Ebony, Ocotea)
+---------------------------------------------------------------------
+
+Changes to all AMCC eval boards:
+--------------------------------
+
+o Changed u-boot image size to 256 kBytes instead of 512 kBytes on most
+  boards.
+
+o Use 115200 baud as default console baudrate.
+
+o Added config option to use redundant environment in flash. This is also
+  the default setting. Option for environment in nvram is still available
+  for backward compatibility.
+
+o Merged board specific flash drivers to common flash driver:
+  board/amcc/common/flash.c
+
+
+Sycamore/Walnut (one port supporting both eval boards):
+-------------------------------------------------------
+
+o Cleanup to allow easier "cloning" for different (custom) boards:
+
+  o Moved EBC configuration from board specific asm-file "init.S"
+    using defines in board configuration file. No board specific
+    asm file needed anymore.
+
+
+August 01 2005, Stefan Roese <sr@denx.de>
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index 584a4fc849..4923209d68 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -52,7 +52,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose,               \
 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);       \
 	return 0;                                                        \
 }
-#elif defined(CONFIG_440_GX)
+#elif defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 #define INDIRECT_PCI_OP(rw, size, type, op, mask)			 \
 static int								 \
 indirect_##rw##_config_##size(struct pci_controller *hose, 		 \
diff --git a/include/405gp_enet.h b/include/405gp_enet.h
index 88ac4add91..233ea1113a 100644
--- a/include/405gp_enet.h
+++ b/include/405gp_enet.h
@@ -67,7 +67,11 @@ struct arp_entry {
 
 			/*Register addresses */
 #if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0D00)
+#else
 #define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0780)
+#endif
 #define ZMII_FER			(ZMII_BASE)
 #define ZMII_SSR			(ZMII_BASE + 4)
 #define ZMII_SMIISR			(ZMII_BASE + 8)
@@ -77,7 +81,11 @@ struct arp_entry {
 #endif /* CONFIG_440 */
 
 #if defined(CONFIG_440)
-#define EMAC_BASE 			(CFG_PERIPHERAL_BASE + 0x0800)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
+#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
 #else
 #define EMAC_BASE 			0xEF600800
 #endif
diff --git a/include/440_i2c.h b/include/440_i2c.h
index b0ac592faf..9fdf7d8d0a 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,11 @@
 #ifndef _440_i2c_h_
 #define _440_i2c_h_
 
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
+#else
 #define    I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
+#endif /*CONFIG_440_EP CONFIG_440_GR*/
 
 #define	   I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
 #define    IIC_MDBUF	(I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
diff --git a/include/440gx_enet.h b/include/440gx_enet.h
index 8caf9691e2..022c5d871e 100644
--- a/include/440gx_enet.h
+++ b/include/440gx_enet.h
@@ -140,7 +140,11 @@ typedef struct emac_440gx_hw_st {
 
 
 /*ZMII Bridge Register addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0D00)
+#else
 #define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0780)
+#endif
 #define ZMII_FER			(ZMII_BASE)
 #define ZMII_SSR			(ZMII_BASE + 4)
 #define ZMII_SMIISR			(ZMII_BASE + 8)
@@ -272,7 +276,11 @@ typedef struct emac_440gx_hw_st {
 
 
 /* Ethernet MAC Regsiter Addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
 #define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
 
 #define EMAC_M0				    (EMAC_BASE)
 #define EMAC_M1				    (EMAC_BASE + 4)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index d4404c1295..6b131b6b08 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -723,6 +723,8 @@
 #define PVR_405GPR_RB	0x50910951
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
+#define PVR_440EP_RA	0x42221850
+#define PVR_440EP_RB	0x422218D3
 #define PVR_440GX_RA	0x51B21850
 #define PVR_440GX_RB	0x51B21851
 #define PVR_440GX_RC	0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index e821e91ecd..5b6cd6f966 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -101,13 +101,18 @@ typedef struct bd_info {
 	unsigned char   bi_enet3addr[6];
 #endif
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \
+    defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	unsigned int	bi_opbfreq;		/* OPB clock in Hz */
 	int		bi_iic_fast[2];		/* Use fast i2c mode */
 #endif
 #if defined(CONFIG_NX823)
 	unsigned char	bi_sernum[8];
 #endif
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+	int 		bi_phynum[2];           /* Determines phy mapping */
+	int 		bi_phymode[2];          /* Determines phy mode */
+#endif
 #if defined(CONFIG_440_GX)
 	int 		bi_phynum[4];           /* Determines phy mapping */
 	int 		bi_phymode[4];          /* Determines phy mode */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index d7025eba67..ca0bd12f06 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -47,7 +47,7 @@
  * CONFIG_PPCHAMELEON_CLK_33
  */
 #if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_PPCHAMELEON_CLK_33
+#define CONFIG_PPCHAMELEON_CLK_25
 #endif
 
 #if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
new file mode 100644
index 0000000000..6ccd8b9f38
--- /dev/null
+++ b/include/configs/bamboo.h
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * bamboo.h - configuration for BAMBOO board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_BAMBOO			1	/* Board is BAMBOO	     */
+#define CONFIG_440_EP			1	/* Specific PPC440EP support */
+
+#define CONFIG_4xx			1	/* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1   /* Call board_early_init_f	*/
+#undef	CFG_DRAM_TEST				/* disable - takes long time! */
+/*#define CONFIG_SYS_CLK_FREQ	66666666    /X* external freq to pll	*/
+#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		    */
+#define CFG_FLASH_BASE	    0xfe000000	    /* start of FLASH		*/
+#define CFG_MONITOR_BASE    TEXT_BASE	    /* start of monitor		*/
+#define CFG_PCI_MEMBASE	    0xa0000000	    /* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1    CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2    CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3    CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000	    /* internal peripherals	*/
+#define CFG_PCI_BASE	    0xe0000000	    /* internal PCI regs	*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE	    (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	0xf0000000		/* DCache */
+#define CFG_INIT_RAM_END	0x2000
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data	*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon	*/
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB		     */
+/*#define CFG_SDRAM_BANKS	(2) */
+#define CFG_SDRAM_BANKS		(1)
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI	1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE		(0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556	1			 /* DS1556 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 0 /* test-only */
+#define CFG_MAX_FLASH_BANKS	1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	256		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	120000	    /* Timeout for Flash Write (in ms)	*/
+#else
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define CFG_FLASH_CFI_AMD_RESET 1		/* AMD RESET for STM 29W320DB!	*/
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM	       /* Don't use SPD EEPROM for setup    */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef	CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
+#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
+#define CFG_ENV_IS_IN_EEPROM	1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CFG_ENV_OFFSET		0x0
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND	"bootm 0xfe000000"    /* autoboot command */
+#define CONFIG_BOOTDELAY	3		    /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI	1	/* required for netconsole  */
+#define CONFIG_PHY1_ADDR	3
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		10.0.4.251
+#define CONFIG_ETHADDR		00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR		00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP		10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+	/* Need to define POST */
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	| \
+			CFG_CMD_DHCP	| \
+			CFG_CMD_DIAG	| \
+			CFG_CMD_ECHO	| \
+			CFG_CMD_EEPROM	| \
+			CFG_CMD_ELF	| \
+		/*	CFG_CMD_EXT2	|*/ \
+		/*	CFG_CMD_FAT	|*/ \
+			CFG_CMD_I2C	| \
+		/*	CFG_CMD_IDE	|*/ \
+			CFG_CMD_IRQ	| \
+		/*	CFG_CMD_KGDB	|*/ \
+			CFG_CMD_MII	| \
+			CFG_CMD_PCI	| \
+			CFG_CMD_PING	| \
+			CFG_CMD_REGINFO | \
+			CFG_CMD_SDRAM	| \
+			CFG_CMD_FLASH	| \
+		/*	CFG_CMD_SPI	|*/ \
+			CFG_CMD_USB	| \
+			0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	| \
+			CFG_CMD_DHCP	| \
+			CFG_CMD_DIAG	| \
+			CFG_CMD_ECHO	| \
+			CFG_CMD_EEPROM	| \
+			CFG_CMD_ELF	| \
+		/*	CFG_CMD_EXT2	|*/ \
+		/*	CFG_CMD_FAT	|*/ \
+			CFG_CMD_I2C	| \
+		/*	CFG_CMD_IDE	|*/ \
+			CFG_CMD_IRQ	| \
+		/*	CFG_CMD_KGDB	|*/ \
+			CFG_CMD_MII	| \
+			CFG_CMD_PCI	| \
+			CFG_CMD_PING	| \
+			CFG_CMD_REGINFO | \
+			CFG_CMD_SDRAM	| \
+			CFG_CMD_FLASH	| \
+		/*	CFG_CMD_SPI	|*/ \
+			0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI		1   /* support kdi files */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI				/* include pci support		*/
+#undef	CONFIG_PCI_PNP				/* do (not) pci plug-and-play	*/
+#define CONFIG_PCI_SCAN_SHOW			/* show pci devices on startup	*/
+#define CFG_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe	/* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/configs/BUBINGA405EP.h b/include/configs/bubinga.h
index 507cb75948..c7451959a8 100644
--- a/include/configs/BUBINGA405EP.h
+++ b/include/configs/bubinga.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,11 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Debug options */
-/*#define __DEBUG_START_FROM_SRAM__ */
-/*#define DEBUG	1*/
-
-
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -40,7 +35,7 @@
 
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family   */
-#define CONFIG_BUBINGA405EP	1	/* ...on a BUBINGA405EP board	*/
+#define CONFIG_BUBINGA	        1	/* ...on a BUBINGA board	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
@@ -49,8 +44,6 @@
 #define CONFIG_NO_SERIAL_EEPROM
 /*#undef CONFIG_NO_SERIAL_EEPROM*/
 /*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
 #ifdef CONFIG_NO_SERIAL_EEPROM
 
 /*
@@ -75,49 +68,60 @@
 
 #endif
 /*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*#define CFG_ENV_IS_IN_FLASH     1*/	/* use FLASH for environment vars	*/
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
 #if 1
-#define CONFIG_BOOTCOMMAND	"" /* autoboot command	*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
-#else
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#endif
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=bubinga\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/bubinga/uImage\0"				\
+	"kernel_addr=fff80000\0"					\
+	"ramdisk_addr=fff90000\0"					\
+	"load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
 
 #if 0
-#define CONFIG_BOOTARGS		"root=/dev/nfs "                        \
-    "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 "        \
-    "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "			\
-   "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
+#define CONFIG_BAUDRATE		115200
+
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
@@ -126,29 +130,8 @@
 
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Bubinga	*/
 
-/*
-#ifndef __DEBUG_START_FROM_SRAM__
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
-#else
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_ELF	)
-#endif
-*/
-
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_CACHE	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
@@ -156,14 +139,13 @@
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_NET	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
 				CFG_CMD_REGINFO	| \
 				CFG_CMD_SDRAM	| \
-				0		)
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -198,6 +180,7 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
 #undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 #define CFG_BASE_BAUD       691200
@@ -211,6 +194,17 @@
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	16	  /* Number of ethernet rx buffers & descriptors */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
@@ -224,7 +218,6 @@
 #define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 #endif
 
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -239,8 +232,8 @@
 					/* resource configuration       */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 #define CFG_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 #define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
@@ -253,9 +246,6 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
-
 #define	CFG_KEY_REG_BASE_ADDR	0xF0100000
 #define	CFG_IR_REG_BASE_ADDR	0xF0200000
 #define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
@@ -266,20 +256,11 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
-#ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_SRAM_BASE		0xFFF80000
-#define CFG_FLASH_BASE		0xFFF00000
-#define CFG_MONITOR_BASE	CFG_SRAM_BASE
-#else
 #define CFG_SRAM_BASE		0xFFF00000
 #define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#endif
-
-
-/*#define CFG_MONITOR_LEN		(200 * 1024)	/XXX* Reserve 200 kB for Monitor	*/
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 200 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
 
 /*
  * For booting Linux, the board info and command line data
@@ -287,6 +268,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
@@ -296,13 +278,20 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
@@ -332,7 +321,6 @@
 #define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
@@ -424,7 +412,6 @@
 #define FPGA_REG1_OFFB_FLASH  0x02       /* Off board flash                   */
 #define FPGA_REG1_SRAM_BOOT   0x01       /* SRAM at 0xFFF80000 not Flash      */
 
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/EBONY.h b/include/configs/ebony.h
index 46e729f15d..ebd0b535b4 100644
--- a/include/configs/EBONY.h
+++ b/include/configs/ebony.h
@@ -36,20 +36,31 @@
 #undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
 #define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
 
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
+
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
 #define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
 #define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CFG_MONITOR_BASE    0xfff80000	    /* start of monitor		*/
+#define CFG_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
 #define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
 #define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
 #define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
 #define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
 
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
 #define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
@@ -69,7 +80,7 @@
  *----------------------------------------------------------------------*/
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		115200
 
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
@@ -87,16 +98,37 @@
 #define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
 #define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
 #define CFG_MAX_FLASH_SECT	32		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
@@ -112,22 +144,47 @@
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
 
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=ebony\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/ebony/uImage\0"				\
+	"kernel_addr=ff800000\0"					\
+	"ramdisk_addr=ff810000\0"					\
+	"load=tftp 100000 /tftpboot/ebony/u-boot.bin\0"		        \
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
 
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
-#define CONFIG_BOOTDELAY	-1		    /* disable autoboot */
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -135,16 +192,22 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		8	/* PHY address			*/
 
-
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -173,6 +236,12 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -188,7 +257,7 @@
 #define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
 #define CFG_PCI_TARGET_INIT	            /* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 
 /*
diff --git a/include/configs/OCOTEA.h b/include/configs/ocotea.h
index 5e78b45dc4..4f90b1b51d 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/ocotea.h
@@ -1,6 +1,9 @@
 /*
  * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
  *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -85,6 +88,21 @@
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
+
+
+/*-----------------------------------------------------------------------
  * NVRAM/RTC
  *
  * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
@@ -97,6 +115,12 @@
 #define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
@@ -107,6 +131,20 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
@@ -122,22 +160,46 @@
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
 
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=ocotea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/ocotea/uImage\0"				\
+	"kernel_addr=fff00000\0"					\
+	"ramdisk_addr=fff10000\0"					\
+	"load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
 
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-#define CONFIG_ENV_OVERWRITE	1
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
-#define CONFIG_BOOTDELAY	-1		    /* disable autoboot */
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
@@ -151,32 +213,22 @@
 #define CONFIG_PHY3_ADDR	0x18
 #define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.1.2.3
-#define CONFIG_ETHADDR		00:04:AC:E3:28:8A
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:04:AC:E3:28:8B
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR		00:04:AC:E3:28:8C
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR		00:04:AC:E3:28:8D
-#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP		10.1.2.2
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_NET	| \
 				CFG_CMD_NFS	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
 				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -206,22 +258,28 @@
 
 #define CFG_HZ		100		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
  */
 /* General PCI */
-#define CONFIG_PCI				    /* include pci support		*/
-#define CONFIG_PCI_PNP				/* do pci plug-and-play		*/
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
 
 /* Board-specific PCI */
 #define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
-#define CFG_PCI_TARGET_INIT		    /* let board init pci target    */
+#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
 /*
@@ -233,7 +291,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_DCACHE_SIZE		32768	/* For IBM 440 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
diff --git a/include/configs/WALNUT405.h b/include/configs/walnut.h
index 9155ce84e0..3a8e61c087 100644
--- a/include/configs/WALNUT405.h
+++ b/include/configs/walnut.h
@@ -1,6 +1,6 @@
 /*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2000-2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -34,69 +34,80 @@
  */
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family   */
-#define CONFIG_WALNUT405	1	/* ...on a WALNUT405 board	*/
+#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_WALNUT		1	/* ...on a WALNUT board		*/
+					/* ...and on a SYCAMORE board	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
-#define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
+#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=walnut\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"	\
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/walnut/uImage\0"				\
+	"kernel_addr=fff80000\0"					\
+	"ramdisk_addr=fff80000\0"					\
+	"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"				\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-/*#define CFG_ENV_IS_IN_FLASH     1*/	/* use FLASH for environment vars	*/
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
-#if 1
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000" /* autoboot command	*/
-#else
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
-#endif
-
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
 #if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
-#if 0
-#define CONFIG_BOOTARGS		"root=/dev/nfs "                        \
-    "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 "        \
-    "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
-#else
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "			\
-   "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
-#endif
+#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII		1	/* MII PHY management		*/
-#define	CONFIG_PHY_ADDR		1	/* PHY address			*/
+#define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -111,9 +122,9 @@
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS	16		/* max number of command args	*/
@@ -131,9 +142,10 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD       691200
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
+#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE  \
@@ -142,46 +154,46 @@
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 #define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
+#define CONFIG_LOOPW		1	/* enable loopw command		*/
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
+#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
- * PCI stuff
+ * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
-#define PCI_HOST_FORCE  1               /* configure as pci host        */
-#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
-
-#define CONFIG_PCI			/* include pci support	        */
-#define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
-					/* resource configuration       */
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
 
 /*-----------------------------------------------------------------------
- * External peripheral base address
+ * PCI stuff
  *-----------------------------------------------------------------------
  */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
-
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
+#define PCI_HOST_FORCE	1		/* configure as pci host	*/
+#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
+
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+					/* resource configuration	*/
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -190,9 +202,20 @@
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *	 supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
 
 /*
  * For booting Linux, the board info and command line data
@@ -200,22 +223,35 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0		*/
+#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1		*/
+
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0		0x5555
+#define CFG_FLASH_ADDR1		0x2aaa
+#define CFG_FLASH_WORD_SIZE	unsigned char
+
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
@@ -227,44 +263,61 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs, older 405 ppc's	*/
+					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
+/* Memory Bank 0 (Flash Bank 0) initialization					*/
+#define CFG_EBC_PB0AP		0x9B015480
+#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit	*/
 
+#define CFG_EBC_PB1AP		0x02815480
+#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR	0xF0000500
+#define CFG_EBC_PB2AP		0x04815A80
+#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_PB3AP		0x01815280
+#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+
+#define CFG_EBC_PB7AP		0x01815280
+#define CFG_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#define CFG_KEY_REG_BASE_ADDR	0xF0100000
+#define CFG_IR_REG_BASE_ADDR	0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
+ * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_DCACHE_CS      4       /* use cs # 4 for data cache memory    */
+#define CFG_INIT_DCACHE_CS	4	/* use cs # 4 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR       0x40000000  /* inside of SDRAM                     */
-#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
+#define CFG_INIT_RAM_ADDR	0x40000000  /* inside of SDRAM			   */
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
  */
-#define SPD_EEPROM_ADDRESS      0x50
+#define SPD_EEPROM_ADDRESS	0x50
 
 /*
  * Internal Definitions
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
new file mode 100644
index 0000000000..d83d8e7b43
--- /dev/null
+++ b/include/configs/yellowstone.h
@@ -0,0 +1,298 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yellowstone.h - configuration for YELLOWSTONE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YELLOWSTONE			1	/* Board is BAMBOO	     */
+#define CONFIG_440_GR				1	/* Specific PPC440GR support */
+
+#define CONFIG_4xx					1	/* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1   /* Call board_early_init_f	*/
+#undef	CFG_DRAM_TEST					/* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ	66666666    /* external freq to pll	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		    */
+#define CFG_FLASH_BASE	    0xf0000000	    /* start of FLASH		*/
+#define CFG_MONITOR_BASE    TEXT_BASE	    /* start of monitor		*/
+#define CFG_PCI_MEMBASE	    0xa0000000	    /* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1    CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2    CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3    CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000	    /* internal peripherals	*/
+#define CFG_PCI_BASE	    0xe0000000	    /* internal PCI regs	*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE	    (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	  0xf0000000		/* DCache */
+#define CFG_INIT_RAM_END	0x2000
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data	*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB		     */
+#define CFG_SDRAM_BANKS	    (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_BAUDRATE			9600
+#define CONFIG_SERIAL_MULTI   1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	    (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556	1			 /* DS1556 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	256		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	120000	    /* Timeout for Flash Write (in ms)	*/
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM	       /* Don't use SPD EEPROM for setup    */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef	CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
+#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CFG_ENV_OFFSET		0x0
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND	"bootm 0xfe000000"    /* autoboot command */
+#define CONFIG_BOOTDELAY	3		    /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII			1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI    1	/* required for netconsole  */
+#define CONFIG_PHY1_ADDR    3
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		10.0.4.251
+#define CONFIG_ETHADDR		00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR		00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP		10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+	/* Need to define POST */
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*	    CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH	|   \
+	/*		CFG_CMD_SPI		|*/	\
+			CFG_CMD_USB	|	\
+			0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*	    CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH	|   \
+	/*		CFG_CMD_SPI		|*/	\
+			0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		    1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI		1   /* support kdi files */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI				    /* include pci support		*/
+#undef	CONFIG_PCI_PNP				/* do (not) pci plug-and-play	      */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
+#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe	/* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
new file mode 100644
index 0000000000..18d6623280
--- /dev/null
+++ b/include/configs/yosemite.h
@@ -0,0 +1,312 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yosemite.h - configuration for YOSEMITE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YOSEMITE				1	/* Board is BAMBOO	     */
+#define CONFIG_440_EP				1	/* Specific PPC440EP support */
+
+#define CONFIG_4xx					1	/* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1   /* Call board_early_init_f	*/
+#undef	CFG_DRAM_TEST					/* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ	66666666    /* external freq to pll	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		    */
+#define CFG_FLASH_BASE	    0xfe000000	    /* start of FLASH		*/
+#define CFG_MONITOR_BASE    TEXT_BASE	    /* start of monitor		*/
+#define CFG_PCI_MEMBASE	    0xa0000000	    /* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1    CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2    CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3    CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000	    /* internal peripherals	*/
+#define CFG_PCI_BASE	    0xe0000000	    /* internal PCI regs	*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE	    (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	  0xf0000000		/* DCache */
+#define CFG_INIT_RAM_END	0x2000
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data	*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB		     */
+#define CFG_SDRAM_BANKS	    (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_BAUDRATE			9600
+#define CONFIG_SERIAL_MULTI   1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	    (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556	1			 /* DS1556 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 1 /* test-only */
+#define CFG_MAX_FLASH_BANKS	1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	256		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	120000	    /* Timeout for Flash Write (in ms)	*/
+#else
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define CFG_FLASH_CFI_AMD_RESET 1		/* AMD RESET for STM 29W320DB!	*/
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM	       /* Don't use SPD EEPROM for setup    */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef	CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
+#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CFG_ENV_OFFSET		0x0
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND	"bootm 0xfe000000"    /* autoboot command */
+#define CONFIG_BOOTDELAY	3		    /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII			1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI    1	/* required for netconsole  */
+#define CONFIG_PHY1_ADDR    3
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		10.0.4.251
+#define CONFIG_ETHADDR		00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR		00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP		10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+	/* Need to define POST */
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*	    CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH	|   \
+	/*		CFG_CMD_SPI		|*/	\
+			CFG_CMD_USB	|	\
+			0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*	    CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH	|   \
+	/*		CFG_CMD_SPI		|*/	\
+			0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		    1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI		1   /* support kdi files */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI				    /* include pci support		*/
+#undef	CONFIG_PCI_PNP				/* do (not) pci plug-and-play	      */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
+#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe	/* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/pci.h b/include/pci.h
index 458be233e4..8f19997559 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -160,6 +160,21 @@
 #define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */
 #define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface */
 
+/* From 440ep */
+#define PCI_ERREN       0x48     /* Error Enable */
+#define PCI_ERRSTS      0x49     /* Error Status */
+#define PCI_BRDGOPT1    0x4A     /* PCI Bridge Options 1 */
+#define PCI_PLBSESR0    0x4C     /* PCI PLB Slave Error Syndrome 0 */
+#define PCI_PLBSESR1    0x50     /* PCI PLB Slave Error Syndrome 1 */
+#define PCI_PLBSEAR     0x54     /* PCI PLB Slave Error Address */
+#define PCI_CAPID       0x58     /* Capability Identifier */
+#define PCI_NEXTITEMPTR 0x59     /* Next Item Pointer */
+#define PCI_PMC         0x5A     /* Power Management Capabilities */
+#define PCI_PMCSR       0x5C     /* Power Management Control Status */
+#define PCI_PMCSRBSE    0x5E     /* PMCSR PCI to PCI Bridge Support Extensions */
+#define PCI_BRDGOPT2    0x60     /* PCI Bridge Options 2 */
+#define PCI_PMSCRR      0x64     /* Power Management State Change Request Re. */
+
 /* Header type 2 (CardBus bridges) */
 #define PCI_CB_CAPABILITY_LIST	0x14
 /* 0x15 reserved */
diff --git a/include/ppc440.h b/include/ppc440.h
index acd4572a82..3e9034f356 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -78,7 +78,7 @@
 #define	 ivor13 0x19d	/* interrupt vector offset register 13 */
 #define	 ivor14 0x19e	/* interrupt vector offset register 14 */
 #define	 ivor15 0x19f	/* interrupt vector offset register 15 */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 #define	 mcsrr0 0x23a	/* machine check save/restore register 0 */
 #define	 mcsrr1 0x23b	/* mahcine check save/restore register 1 */
 #define	 mcsr	0x23c	/* machine check status register */
@@ -108,6 +108,7 @@
 #define	 icdbtrh 0x39f	/* instruction cache debug tag register high */
 #define	 mmucr	0x3b2	/* mmu control register */
 #define	 ccr0	0x3b3	/* core configuration register 0 */
+#define  ccr1  	0x378	/* core configuration for 440x5 only */
 #define	 icdbdr 0x3d3	/* instruction cache debug data register */
 #define	 dbdr	0x3f3	/* debug data register */
 
@@ -131,6 +132,7 @@
 #define clk_opbd	0x00c0
 #define clk_perd	0x00e0
 #define clk_mald	0x0100
+#define clk_spcid   	0x0120
 #define clk_icfg	0x0140
 
 /* 440gx sdr register definations */
@@ -149,19 +151,24 @@
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
 #define sdr_uart1	0x0121	/* UART1 Config */
+#define sdr_uart2	0x0122	/* UART2 Config */
+#define sdr_uart3	0x0123	/* UART3 Config */
 #define sdr_cp440	0x0180
 #define sdr_xcr		0x01c0
 #define sdr_xpllc	0x01c1
 #define sdr_xplld	0x01c2
 #define sdr_srst	0x0200
 #define sdr_slpipe	0x0220
-#define sdr_amp		0x0240
+#define sdr_amp0        0x0240  /* Override PLB4 prioritiy for up to 8 masters */
+#define sdr_amp1        0x0241  /* Override PLB3 prioritiy for up to 8 masters */
 #define sdr_mirq0	0x0260
 #define sdr_mirq1	0x0261
 #define sdr_maltbl	0x0280
 #define sdr_malrbl	0x02a0
 #define sdr_maltbs	0x02c0
 #define sdr_malrbs	0x02e0
+#define sdr_pci0        0x0300
+#define sdr_usb0        0x0320
 #define sdr_cust0	0x4000
 #define sdr_sdstp2	0x4001
 #define sdr_cust1	0x4002
@@ -234,6 +241,98 @@
 #define xbcfg		0x23	/* external bus configuration reg	*/
 #define xbcid		0x23	/* external bus core id reg		*/
 
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PLB4 to PLB3 Bridge OUT */
+#define P4P3_DCR_BASE           0x020
+#define p4p3_esr0_read          (P4P3_DCR_BASE+0x0)
+#define p4p3_esr0_write         (P4P3_DCR_BASE+0x1)
+#define p4p3_eadr               (P4P3_DCR_BASE+0x2)
+#define p4p3_euadr              (P4P3_DCR_BASE+0x3)
+#define p4p3_esr1_read          (P4P3_DCR_BASE+0x4)
+#define p4p3_esr1_write         (P4P3_DCR_BASE+0x5)
+#define p4p3_confg              (P4P3_DCR_BASE+0x6)
+#define p4p3_pic                (P4P3_DCR_BASE+0x7)
+#define p4p3_peir               (P4P3_DCR_BASE+0x8)
+#define p4p3_rev                (P4P3_DCR_BASE+0xA)
+
+/* PLB3 to PLB4 Bridge IN */
+#define P3P4_DCR_BASE           0x030
+#define p3p4_esr0_read          (P3P4_DCR_BASE+0x0)
+#define p3p4_esr0_write         (P3P4_DCR_BASE+0x1)
+#define p3p4_eadr               (P3P4_DCR_BASE+0x2)
+#define p3p4_euadr              (P3P4_DCR_BASE+0x3)
+#define p3p4_esr1_read          (P3P4_DCR_BASE+0x4)
+#define p3p4_esr1_write         (P3P4_DCR_BASE+0x5)
+#define p3p4_confg              (P3P4_DCR_BASE+0x6)
+#define p3p4_pic                (P3P4_DCR_BASE+0x7)
+#define p3p4_peir               (P3P4_DCR_BASE+0x8)
+#define p3p4_rev                (P3P4_DCR_BASE+0xA)
+
+/* PLB3 Arbiter */
+#define PLB3_DCR_BASE           0x070
+#define plb3_revid              (PLB3_DCR_BASE+0x2)
+#define plb3_besr               (PLB3_DCR_BASE+0x3)
+#define plb3_bear               (PLB3_DCR_BASE+0x6)
+#define plb3_acr                (PLB3_DCR_BASE+0x7)
+
+/* PLB4 Arbiter - PowerPC440EP Pass1 */
+#define PLB4_DCR_BASE           0x080
+#define plb4_revid              (PLB4_DCR_BASE+0x2)
+#define plb4_acr                (PLB4_DCR_BASE+0x3)
+#define plb4_besr               (PLB4_DCR_BASE+0x4)
+#define plb4_bearl              (PLB4_DCR_BASE+0x6)
+#define plb4_bearh              (PLB4_DCR_BASE+0x7)
+
+/* Nebula PLB4 Arbiter - PowerPC440EP */
+#define PLB_ARBITER_BASE   0x80
+
+#define plb0_revid                (PLB_ARBITER_BASE+ 0x00)
+#define plb0_acr                  (PLB_ARBITER_BASE+ 0x01)
+#define   plb0_acr_ppm_mask             0xF0000000
+#define   plb0_acr_ppm_fixed            0x00000000
+#define   plb0_acr_ppm_fair             0xD0000000
+#define   plb0_acr_hbu_mask             0x08000000
+#define   plb0_acr_hbu_disabled         0x00000000
+#define   plb0_acr_hbu_enabled          0x08000000
+#define   plb0_acr_rdp_mask             0x06000000
+#define   plb0_acr_rdp_disabled         0x00000000
+#define   plb0_acr_rdp_2deep            0x02000000
+#define   plb0_acr_rdp_3deep            0x04000000
+#define   plb0_acr_rdp_4deep            0x06000000
+#define   plb0_acr_wrp_mask             0x01000000
+#define   plb0_acr_wrp_disabled         0x00000000
+#define   plb0_acr_wrp_2deep            0x01000000
+
+#define plb0_besrl                (PLB_ARBITER_BASE+ 0x02)
+#define plb0_besrh                (PLB_ARBITER_BASE+ 0x03)
+#define plb0_bearl                (PLB_ARBITER_BASE+ 0x04)
+#define plb0_bearh                (PLB_ARBITER_BASE+ 0x05)
+#define plb0_ccr                  (PLB_ARBITER_BASE+ 0x08)
+
+#define plb1_acr                  (PLB_ARBITER_BASE+ 0x09)
+#define   plb1_acr_ppm_mask             0xF0000000
+#define   plb1_acr_ppm_fixed            0x00000000
+#define   plb1_acr_ppm_fair             0xD0000000
+#define   plb1_acr_hbu_mask             0x08000000
+#define   plb1_acr_hbu_disabled         0x00000000
+#define   plb1_acr_hbu_enabled          0x08000000
+#define   plb1_acr_rdp_mask             0x06000000
+#define   plb1_acr_rdp_disabled         0x00000000
+#define   plb1_acr_rdp_2deep            0x02000000
+#define   plb1_acr_rdp_3deep            0x04000000
+#define   plb1_acr_rdp_4deep            0x06000000
+#define   plb1_acr_wrp_mask             0x01000000
+#define   plb1_acr_wrp_disabled         0x00000000
+#define   plb1_acr_wrp_2deep            0x01000000
+
+#define plb1_besrl                (PLB_ARBITER_BASE+ 0x0A)
+#define plb1_besrh                (PLB_ARBITER_BASE+ 0x0B)
+#define plb1_bearl                (PLB_ARBITER_BASE+ 0x0C)
+#define plb1_bearh                (PLB_ARBITER_BASE+ 0x0D)
+
+#else
+
 /*-----------------------------------------------------------------------------
  | Internal SRAM
  +----------------------------------------------------------------------------*/
@@ -265,6 +364,7 @@
 #define l2_cache_snp1	(L2_CACHE_BASE+0x07)	/* L2 Cache Snoop reg 1 */
 
 #endif /* CONFIG_440_GX */
+#endif /* !CONFIG_440_EP !CONFIG_440_GR*/
 
 /*-----------------------------------------------------------------------------
  | On-Chip Buses
@@ -417,10 +517,8 @@
 #define malrxbattr  (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg	    */
 #define maltxctp0r  (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg   */
 #define maltxctp1r  (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg   */
-#if defined(CONFIG_440_GX)
 #define maltxctp2r  (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg   */
 #define maltxctp3r  (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg   */
-#endif /* CONFIG_440_GX */
 #define malrxctp0r  (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg   */
 #define malrxctp1r  (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg   */
 #if defined(CONFIG_440_GX)
@@ -893,6 +991,23 @@
 #define SDR0_MFR_ECS_MASK		0x10000000
 #define SDR0_MFR_ECS_INTERNAL		0x10000000
 
+#define SDR0_MFR_ETH0_CLK_SEL        0x08000000   /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL        0x04000000   /* Ethernet1 Clock Select */
+#define SDR0_MFR_ZMII_MODE_MASK      0x03000000   /* ZMII Mode Mask   */
+#define SDR0_MFR_ZMII_MODE_MII       0x00000000     /* ZMII Mode MII  */
+#define SDR0_MFR_ZMII_MODE_SMII      0x01000000     /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M  0x02000000     /* ZMII Mode RMII - 10 Mbs   */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000     /* ZMII Mode RMII - 100 Mbs  */
+#define SDR0_MFR_ZMII_MODE_BIT0      0x02000000     /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1      0x01000000     /* ZMII Mode Bit1 */
+#define SDR0_MFR_ERRATA3_EN0         0x00800000
+#define SDR0_MFR_ERRATA3_EN1         0x00400000
+#define SDR0_MFR_PKT_REJ_MASK        0x00300000   /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN          0x00300000   /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0         0x00200000   /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1         0x00100000   /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL         0x00080000   /* Packet Reject Polarity      */
+
 #define SDR0_SRST_BGO			0x80000000
 #define SDR0_SRST_PLB			0x40000000
 #define SDR0_SRST_EBC			0x20000000
@@ -927,7 +1042,7 @@
 /*-----------------------------------------------------------------------------+
 |  Clocking
 +-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440_GX)
+#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
 #define PLLSYS0_TUNE_MASK	0xffc00000	/* PLL TUNE bits	    */
 #define PLLSYS0_FB_DIV_MASK	0x003c0000	/* Feedback divisor	    */
 #define PLLSYS0_FWD_DIV_A_MASK	0x00038000	/* Forward divisor A	    */
@@ -945,7 +1060,7 @@
 #define PLL_VCO_FREQ_MAX	1000		/* Max VCO freq (MHz)	    */
 #define PLL_CPU_FREQ_MAX	400		/* Max CPU freq (MHz)	    */
 #define PLL_PLB_FREQ_MAX	133		/* Max PLB freq (MHz)	    */
-#else /* !CONFIG_440_GX */
+#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */
 #define PLLSYS0_ENG_MASK	0x80000000	/* 0 = SysClk, 1 = PLL VCO */
 #define PLLSYS0_SRC_MASK	0x40000000	/* 0 = PLL A, 1 = PLL B */
 #define PLLSYS0_SEL_MASK	0x38000000	/* 0 = PLL, 1 = CPU, 5 = PerClk */
@@ -956,6 +1071,19 @@
 #define PLLSYS0_PRI_DIV_B_MASK	0x0000001c	/* PLL Primary Divisor B */
 #define PLLSYS0_OPB_DIV_MASK	0x00000003	/* OPB Divisor */
 
+#define PLLC_ENG_MASK       0x20000000  /* PLL primary forward divisor source   */
+#define PLLC_SRC_MASK       0x20000000  /* PLL feedback source   */
+#define PLLD_FBDV_MASK      0x1f000000  /* PLL Feedback Divisor  */
+#define PLLD_FWDVA_MASK     0x000f0000  /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK     0x00000700  /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK     0x0000003f  /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK         0x03000000  /* OPB Clock Divisor Register */
+#define PERDV_MASK          0x07000000  /* Periferal Clock Divisor */
+#define PRADV_MASK          0x07000000  /* Primary Divisor A */
+#define PRBDV_MASK          0x07000000  /* Primary Divisor B */
+#define SPCID_MASK          0x03000000  /* Sync PCI Divisor  */
+
 #define PLL_VCO_FREQ_MIN	500		/* Min VCO freq (MHz)	    */
 #define PLL_VCO_FREQ_MAX	1000		/* Max VCO freq (MHz)	    */
 #define PLL_CPU_FREQ_MAX	400		/* Max CPU freq (MHz)	    */
@@ -1023,6 +1151,34 @@
 #define PCIX0_CFGBASE		(CFG_PCI_BASE + 0x0ec80000)
 #define PCIX0_IOBASE		(CFG_PCI_BASE + 0x08000000)
 
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PCI Local Configuration Registers
+   --------------------------------- */
+#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000)    /* Real => 0x0EF400000 */
+
+/* PCI Master Local Configuration Registers */
+#define PCIX0_PMM0LA         (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
+#define PCIX0_PMM0MA         (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
+#define PCIX0_PMM0PCILA      (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
+#define PCIX0_PMM0PCIHA      (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
+#define PCIX0_PMM1LA         (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
+#define PCIX0_PMM1MA         (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
+#define PCIX0_PMM1PCILA      (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
+#define PCIX0_PMM1PCIHA      (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
+#define PCIX0_PMM2LA         (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
+#define PCIX0_PMM2MA         (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
+#define PCIX0_PMM2PCILA      (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
+#define PCIX0_PMM2PCIHA      (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
+
+/* PCI Target Local Configuration Registers */
+#define PCIX0_PTM1MS         (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */
+#define PCIX0_PTM1LA         (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
+#define PCIX0_PTM2MS         (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */
+#define PCIX0_PTM2LA         (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
+
+#else
+
 #define PCIX0_VENDID		(PCIX0_CFGBASE + PCI_VENDOR_ID )
 #define PCIX0_DEVID		(PCIX0_CFGBASE + PCI_DEVICE_ID )
 #define PCIX0_CMD		(PCIX0_CFGBASE + PCI_COMMAND )
@@ -1079,6 +1235,52 @@
 
 #define PCIX0_STS		(PCIX0_CFGBASE + 0x00e0)
 
+#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */
+
+/******************************************************************************
+ * GPIO macro register defines
+ ******************************************************************************/
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define GPIO_BASE0             (CFG_PERIPHERAL_BASE+0x00000B00)
+#define GPIO_BASE1             (CFG_PERIPHERAL_BASE+0x00000C00)
+
+#define GPIO0_OR               (GPIO_BASE0+0x0)
+#define GPIO0_TCR              (GPIO_BASE0+0x4)
+#define GPIO0_OSRL             (GPIO_BASE0+0x8)
+#define GPIO0_OSRH             (GPIO_BASE0+0xC)
+#define GPIO0_TSRL             (GPIO_BASE0+0x10)
+#define GPIO0_TSRH             (GPIO_BASE0+0x14)
+#define GPIO0_ODR              (GPIO_BASE0+0x18)
+#define GPIO0_IR               (GPIO_BASE0+0x1C)
+#define GPIO0_RR1              (GPIO_BASE0+0x20)
+#define GPIO0_RR2              (GPIO_BASE0+0x24)
+#define GPIO0_RR3	       (GPIO_BASE0+0x28)
+#define GPIO0_ISR1L            (GPIO_BASE0+0x30)
+#define GPIO0_ISR1H            (GPIO_BASE0+0x34)
+#define GPIO0_ISR2L            (GPIO_BASE0+0x38)
+#define GPIO0_ISR2H            (GPIO_BASE0+0x3C)
+#define GPIO0_ISR3L            (GPIO_BASE0+0x40)
+#define GPIO0_ISR3H            (GPIO_BASE0+0x44)
+
+#define GPIO1_OR               (GPIO_BASE1+0x0)
+#define GPIO1_TCR              (GPIO_BASE1+0x4)
+#define GPIO1_OSRL             (GPIO_BASE1+0x8)
+#define GPIO1_OSRH             (GPIO_BASE1+0xC)
+#define GPIO1_TSRL             (GPIO_BASE1+0x10)
+#define GPIO1_TSRH             (GPIO_BASE1+0x14)
+#define GPIO1_ODR              (GPIO_BASE1+0x18)
+#define GPIO1_IR               (GPIO_BASE1+0x1C)
+#define GPIO1_RR1              (GPIO_BASE1+0x20)
+#define GPIO1_RR2              (GPIO_BASE1+0x24)
+#define GPIO1_RR3              (GPIO_BASE1+0x28)
+#define GPIO1_ISR1L            (GPIO_BASE1+0x30)
+#define GPIO1_ISR1H            (GPIO_BASE1+0x34)
+#define GPIO1_ISR2L            (GPIO_BASE1+0x38)
+#define GPIO1_ISR2H            (GPIO_BASE1+0x3C)
+#define GPIO1_ISR3L            (GPIO_BASE1+0x40)
+#define GPIO1_ISR3H            (GPIO_BASE1+0x44)
+#endif
+
 /*
  * Macros for accessing the indirect EBC registers
  */
@@ -1111,12 +1313,17 @@ typedef struct {
 	unsigned long pllFwdDivB;
 	unsigned long pllFbkDiv;
 	unsigned long pllOpbDiv;
+	unsigned long pllPciDiv;
 	unsigned long pllExtBusDiv;
 	unsigned long freqVCOMhz;	/* in MHz			   */
 	unsigned long freqProcessor;
+	unsigned long freqTmrClk;
 	unsigned long freqPLB;
 	unsigned long freqOPB;
 	unsigned long freqEPB;
+	unsigned long freqPCI;
+	unsigned long pciIntArbEn;            /* Internal PCI arbiter is enabled */
+	unsigned long pciClkSync;             /* PCI clock is synchronous        */
 } PPC440_SYS_INFO;
 
 #endif	/* _ASMLANGUAGE */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 1bcf6736df..c4b16e8db3 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -547,7 +547,7 @@ void board_init_f (ulong bootflag)
 
 	bd->bi_procfreq = gd->cpu_clk;	/* Processor Speed, In Hz */
 	bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
 	bd->bi_pci_busfreq = get_PCI_freq ();
 	bd->bi_opbfreq = get_OPB_freq ();
 #elif defined(CONFIG_XILINX_ML300)