Merge branch 'master' of /home/stefan/git/u-boot/u-boot

35 files changed, 450 insertions, 1072 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 9a117a6276..85dc920f2b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,33 @@
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 16 18:02:19 2008 +0200
+
+    TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+    After switching to using the CFI flash driver, the correct remapping
+    of the flash banks was forgotten.
+
+    Also, some boards were not adapted, and the old legacy flash driver
+    was not removed yet.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Sep 14 00:59:35 2008 +0200
+
+    Prepare v2008.10-rc2
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Sep 13 02:23:05 2008 +0200
+
+    Coding style cleanup, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
 Author: Peter Tyser <ptyser@xes-inc.com>
 Date:	Wed Sep 10 09:18:34 2008 -0500
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
index 332f65a4ce..8b46595f33 100644
--- a/board/ms7722se/lowlevel_init.S
+++ b/board/ms7722se/lowlevel_init.S
@@ -43,48 +43,61 @@
 
 lowlevel_init:
 
-	mov.l	CCR_A, r1	! Address of Cache Control Register
-	mov.l	CCR_D, r0	! Instruction Cache Invalidate
+	/* Address of Cache Control Register */
+	mov.l	CCR_A, r1
+	/*Instruction Cache Invalidate */
+	mov.l	CCR_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MMUCR_A, r1	! Address of MMU Control Register
-	mov.l	MMUCR_D, r0	! TI == TLB Invalidate bit
+	/* Address of MMU Control Register */
+	mov.l	MMUCR_A, r1
+	/* TI == TLB Invalidate bit */
+	mov.l	MMUCR_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MSTPCR0_A, r1	! Address of Power Control Register 0
-	mov.l	MSTPCR0_D, r0	!
+	/* Address of Power Control Register 0 */
+	mov.l	MSTPCR0_A, r1
+	mov.l	MSTPCR0_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MSTPCR2_A, r1	! Address of Power Control Register 2
-	mov.l	MSTPCR2_D, r0	!
+	/* Address of Power Control Register 2 */
+	mov.l	MSTPCR2_A, r1
+	mov.l	MSTPCR2_D, r0
 	mov.l	r0, @r1
 
-	mov.l	SBSCR_A, r1	!
-	mov.w	SBSCR_D, r0	!
+	mov.l	SBSCR_A, r1
+	mov.w	SBSCR_D, r0
 	mov.w	r0, @r1
 
-	mov.l	PSCR_A, r1	!
-	mov.w	PSCR_D, r0	!
+	mov.l	PSCR_A, r1
+	mov.w	PSCR_D, r0
 	mov.w	r0, @r1
 
-!	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-!	mov.w	RWTCSR_D_1, r0	! 0xA507 -> timer_STOP/WDT_CLK=max
+	/* 0xA4520004 (Watchdog Control / Status Register) */
+!	mov.l	RWTCSR_A, r1
+	/* 0xA507 -> timer_STOP/WDT_CLK=max */
+!	mov.w	RWTCSR_D_1, r0
 !	mov.w	r0, @r1
 
-	mov.l	RWTCNT_A, r1	! 0xA4520000 (Watchdog Count Register)
-	mov.w	RWTCNT_D, r0	! 0x5A00 -> Clear
+	/* 0xA4520000 (Watchdog Count Register) */
+	mov.l	RWTCNT_A, r1
+	/*0x5A00 -> Clear */
+	mov.w	RWTCNT_D, r0
 	mov.w	r0, @r1
 
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_2, r0	! 0xA504 -> timer_STOP/CLK=500ms
+	/* 0xA4520004 (Watchdog Control / Status Register) */
+	mov.l	RWTCSR_A, r1
+	/* 0xA504 -> timer_STOP/CLK=500ms */
+	mov.w	RWTCSR_D_2, r0
 	mov.w	r0, @r1
 
-	mov.l	FRQCR_A, r1		! 0xA4150000 Frequency control register
+	/* 0xA4150000 Frequency control register */
+	mov.l	FRQCR_A, r1
 	mov.l	FRQCR_D, r0	!
 	mov.l	r0, @r1
 
-	mov.l	CCR_A, r1		! Address of Cache Control Register
-	mov.l	CCR_D_2, r0	! ??
+	mov.l	CCR_A, r1
+	mov.l	CCR_D_2, r0
 	mov.l	r0, @r1
 
 bsc_init:
@@ -290,5 +303,6 @@ PSCR_D:		.word	0x0000
 RWTCSR_D_1:	.word	0xA507
 RWTCSR_D_2:	.word	0xA507
 RWTCNT_D:	.word	0x5A00
+	.align	2
 
 SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/r7780mp/lowlevel_init.S b/board/r7780mp/lowlevel_init.S
index 05c075b6ca..ab0499a3a2 100644
--- a/board/r7780mp/lowlevel_init.S
+++ b/board/r7780mp/lowlevel_init.S
@@ -325,8 +325,9 @@ repeat2:
 RWTCSR_D_1:				.word	0xA507
 RWTCSR_D_2:				.word	0xA507
 RWTCNT_D:				.word	0x5A00
+	.align	2
 
-BBG_PMMR_A:			.long	0xFF800010
+BBG_PMMR_A:				.long	0xFF800010
 BBG_PMSR1_A:			.long	0xFF800014
 BBG_PMSR2_A:			.long	0xFF800018
 BBG_PMSR3_A:			.long	0xFF80001C
diff --git a/board/rsk7203/rsk7203.c b/board/rsk7203/rsk7203.c
index beb943e85b..2d74359437 100644
--- a/board/rsk7203/rsk7203.c
+++ b/board/rsk7203/rsk7203.c
@@ -48,3 +48,24 @@ int dram_init(void)
 void led_set_state(unsigned short value)
 {
 }
+
+/*
+ * The RSK board has the SMSC9118 wired up 'incorrectly'.
+ * Byte-swapping is necessary, and so poor performance is inevitable.
+ * This problem cannot evade by the swap function of CHIP, this can
+ * evade by software Byte-swapping.
+ * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ * functions necessary to solve this problem.
+ */
+u32 pkt_data_pull(u32 addr)
+{
+	volatile u16 *addr_16 = (u16 *)addr;
+	return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
+				| swab16(*(addr_16 + 1));
+}
+
+void pkt_data_push(u32 addr, u32 val)
+{
+	*(volatile u16 *)(addr + 2) = swab16((u16)val);
+	*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
+}
diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c
index d924595b76..ce0620f687 100644
--- a/board/sh7785lcr/selfcheck.c
+++ b/board/sh7785lcr/selfcheck.c
@@ -84,7 +84,7 @@ static void test_net(void)
 	if (data == 0x816910ec)
 		printf("Ethernet OK\n");
 	else
-		printf("Ethernet NG, data = %08x\n", data);
+		printf("Ethernet NG, data = %08x\n", (unsigned int)data);
 }
 
 static void test_sata(void)
@@ -96,7 +96,7 @@ static void test_sata(void)
 	if (data == 0x35121095)
 		printf("SATA OK\n");
 	else
-		printf("SATA NG, data = %08x\n", data);
+		printf("SATA NG, data = %08x\n", (unsigned int)data);
 }
 
 static void test_pci(void)
diff --git a/board/tqc/tqm8xx/Makefile b/board/tqc/tqm8xx/Makefile
index b48934b429..280982dd41 100644
--- a/board/tqc/tqm8xx/Makefile
+++ b/board/tqc/tqm8xx/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o load_sernum_ethaddr.o
+COBJS	= $(BOARD).o load_sernum_ethaddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/tqc/tqm8xx/flash.c b/board/tqc/tqm8xx/flash.c
deleted file mode 100644
index ca35e916ad..0000000000
--- a/board/tqc/tqm8xx/flash.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <environment.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
-
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
-    && !defined(CONFIG_TQM885D)
-# ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
-#  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
-					 OR_SCY_2_CLK | OR_EHTR | OR_BI)
-# endif
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
-#ifndef	CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR	(CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-#ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
-	int scy, trlx, flash_or_timing, clk_diff;
-
-	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
-	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
-		trlx = OR_TRLX;
-		scy *= 2;
-	} else
-		trlx = 0;
-
-		/* We assume that each 10MHz of bus clock require 1-clk SCY
-		 * adjustment.
-		 */
-	clk_diff = (gd->bus_clk / 1000000) - 50;
-
-		/* We need proper rounding here. This is what the "+5" and "-5"
-		 * are here for.
-		 */
-	if (clk_diff >= 0)
-		scy += (clk_diff + 5) / 10;
-	else
-		scy += (clk_diff - 5) / 10;
-
-		/* For bus frequencies above 50MHz, we want to use relaxed timing
-		 * (OR_TRLX).
-		 */
-	if (gd->bus_clk >= 50000000)
-		trlx = OR_TRLX;
-	else
-		trlx = 0;
-
-	if (trlx)
-		scy /= 2;
-
-	if (scy > 0xf)
-		scy = 0xf;
-	if (scy < 1)
-		scy = 1;
-
-	flash_or_timing = (scy << 4) | trlx |
-	                  (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
-#endif
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	debug ("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	debug ("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1<<20,
-			size_b0, size_b0<<20
-		);
-		flash_info[0].flash_id	= FLASH_UNKNOWN;
-		flash_info[1].flash_id	= FLASH_UNKNOWN;
-		flash_info[0].sector_count	= -1;
-		flash_info[1].sector_count	= -1;
-		flash_info[0].size		= 0;
-		flash_info[1].size		= 0;
-		return (0);
-	}
-
-	debug  ("## Before remap: "
-		"BR0: 0x%08x    OR0: 0x%08x    "
-		"BR1: 0x%08x    OR1: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0,
-		memctl->memc_br1, memctl->memc_or1);
-
-	/* Remap FLASH according to real size */
-#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-#else
-	memctl->memc_or0 = flash_or_timing | (-size_b0 & OR_AM_MSK);
-#endif
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0);
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	debug ("Protect monitor: %08lx ... %08lx\n",
-		(ulong)CFG_MONITOR_BASE,
-		(ulong)CFG_MONITOR_BASE + monitor_flash_len - 1);
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-# ifdef CONFIG_ENV_ADDR_REDUND
-	debug ("Protect primary   environment: %08lx ... %08lx\n",
-		(ulong)CONFIG_ENV_ADDR,
-		(ulong)CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1);
-# else
-	debug ("Protect environment: %08lx ... %08lx\n",
-		(ulong)CONFIG_ENV_ADDR,
-		(ulong)CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1);
-# endif
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-		      &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_ADDR_REDUND
-	debug ("Protect redundand environment: %08lx ... %08lx\n",
-		(ulong)CONFIG_ENV_ADDR_REDUND,
-		(ulong)CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1);
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR_REDUND,
-		      CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-#else
-		memctl->memc_or1 = flash_or_timing | (-size_b1 & 0xFFFF8000);
-#endif
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
-				    BR_MS_GPCM | BR_V;
-
-		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
-					  &flash_info[1]);
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br1 = 0;		/* invalidate bank */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-		flash_info[1].size = 0;
-
-		debug ("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-	}
-
-	debug ("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case FLASH_AMLV128U:	printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV320U:	printf ("AM29LV320ML (32Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV640U:	printf ("AM29LV640ML (64Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV320B:	printf ("AM29LV320MB (32Mbit, bottom boot sect)\n");
-				break;
-# else	/* ! TQM8xxM */
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-#endif	/* TQM8xxM */
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AMDL163B:	printf ("AM29DL163B (16 Mbit, bottom boot sect)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
-	switch (value) {
-	case AMD_MANUFACT:
-		debug ("Manufacturer: AMD\n");
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		debug ("Manufacturer: FUJITSU\n");
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		debug ("Manufacturer: *** unknown ***\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
-	switch (value) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case AMD_ID_MIRROR:
-		debug ("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n",
-			addr[14], addr[15]);
-		/* Special case for AMLV320MH/L */
-		if ((addr[14] & 0x00ff00ff) == 0x001d001d &&
-		    (addr[15] & 0x00ff00ff) == 0x00000000) {
-			debug ("Chip: AMLV320MH/L\n");
-			info->flash_id += FLASH_AMLV320U;
-			info->sector_count = 64;
-			info->size = 0x00800000;	/* => 8 MB */
-			break;
-		}
-		switch(addr[14]) {
-		case AMD_ID_LV128U_2:
-			if (addr[15] != AMD_ID_LV128U_3) {
-				debug ("Chip: AMLV128U -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV128U\n");
-				info->flash_id += FLASH_AMLV128U;
-				info->sector_count = 256;
-				info->size = 0x02000000;
-			}
-			break;				/* => 32 MB	*/
-		case AMD_ID_LV640U_2:
-			if (addr[15] != AMD_ID_LV640U_3) {
-				debug ("Chip: AMLV640U -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV640U\n");
-				info->flash_id += FLASH_AMLV640U;
-				info->sector_count = 128;
-				info->size = 0x01000000;
-			}
-			break;				/* => 16 MB	*/
-		case AMD_ID_LV320B_2:
-			if (addr[15] != AMD_ID_LV320B_3) {
-				debug ("Chip: AMLV320B -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV320B\n");
-				info->flash_id += FLASH_AMLV320B;
-				info->sector_count = 71;
-				info->size = 0x00800000;
-			}
-			break;				/* =>  8 MB	*/
-		default:
-			debug ("Chip: *** unknown ***\n");
-			info->flash_id = FLASH_UNKNOWN;
-			break;
-		}
-		break;
-# else	/* ! TQM8xxM */
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;					/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;					/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;					/* => 2 MB	*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;					/* => 2 MB	*/
-
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;					/* => 8 MB	*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;					/* => 8 MB	*/
-#endif	/* TQM8xxM */
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	case AMD_ID_DL163B:
-		info->flash_id += FLASH_AMDL163B;
-		info->sector_count = 39;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	switch (value) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case AMD_ID_MIRROR:
-		switch (info->flash_id & FLASH_TYPEMASK) {
-			/* only known types here - no default */
-		case FLASH_AMLV128U:
-		case FLASH_AMLV640U:
-		case FLASH_AMLV320U:
-			for (i = 0; i < info->sector_count; i++) {
-				info->start[i] = base;
-				base += 0x20000;
-			}
-			break;
-		case FLASH_AMLV320B:
-			for (i = 0; i < info->sector_count; i++) {
-				info->start[i] = base;
-				/*
-				 * The first 8 sectors are 8 kB,
-				 * all the other ones  are 64 kB
-				 */
-				base += (i < 8)
-					?  2 * ( 8 << 10)
-					:  2 * (64 << 10);
-			}
-			break;
-		}
-		break;
-# else	/* ! TQM8xxM */
-	case AMD_ID_LV400B:
-	case AMD_ID_LV800B:
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-		break;
-	case AMD_ID_LV400T:
-	case AMD_ID_LV800T:
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-		break;
-	case AMD_ID_LV320B:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The first 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < 8)
-				?  2 * ( 8 << 10)
-				:  2 * (64 << 10);
-		}
-		break;
-	case AMD_ID_LV320T:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The last 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < (info->sector_count - 8))
-				?  2 * (64 << 10)
-				:  2 * ( 8 << 10);
-		}
-		break;
-#endif	/* TQM8xxM */
-	case AMD_ID_LV160B:
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-		break;
-	case AMD_ID_LV160T:
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-		break;
-	case AMD_ID_DL163B:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The first 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < 8)
-				?  2 * ( 8 << 10)
-				:  2 * (64 << 10);
-		}
-		break;
-	default:
-		return (0);
-		break;
-	}
-
-#if 0
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-#endif
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-#endif /* !defined(CONFIG_FLASH_CFI_DRIVER) */
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 96b6103fc7..5537d044a5 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,16 +21,14 @@
  * MA 02111-1307 USA
  */
 
-#if 0
-#define DEBUG
-#endif
-
 #include <common.h>
 #include <mpc8xx.h>
 #ifdef CONFIG_PS2MULT
 #include <ps2mult.h>
 #endif
 
+extern flash_info_t flash_info[];	/* FLASH chips info */
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static long int dram_size (long int, long int *, long int);
@@ -402,8 +400,6 @@ phys_size_t initdram (int board_type)
 	memctl->memc_or5 = CFG_OR5_ISP1362;
 	memctl->memc_br5 = CFG_BR5_ISP1362;
 #endif							/* CONFIG_ISP1362_USB */
-
-
 	return (size_b0 + size_b1);
 }
 
@@ -451,24 +447,112 @@ int board_early_init_r (void)
 
 #endif /* CONFIG_PS2MULT */
 
-/* ---------------------------------------------------------------------------- */
-/* HMI10 specific stuff								*/
-/* ---------------------------------------------------------------------------- */
-#ifdef CONFIG_HMI10
 
+#ifdef CONFIG_MISC_INIT_R
 int misc_init_r (void)
 {
-# ifdef CONFIG_IDE_LED
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+#ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
+	int scy, trlx, flash_or_timing, clk_diff;
+
+	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
+	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
+		trlx = OR_TRLX;
+		scy *= 2;
+	} else {
+		trlx = 0;
+	}
+
+	/*
+	 * We assume that each 10MHz of bus clock require 1-clk SCY
+	 * adjustment.
+	 */
+	clk_diff = (gd->bus_clk / 1000000) - 50;
+
+	/*
+	 * We need proper rounding here. This is what the "+5" and "-5"
+	 * are here for.
+	 */
+	if (clk_diff >= 0)
+		scy += (clk_diff + 5) / 10;
+	else
+		scy += (clk_diff - 5) / 10;
+
+	/*
+	 * For bus frequencies above 50MHz, we want to use relaxed timing
+	 * (OR_TRLX).
+	 */
+	if (gd->bus_clk >= 50000000)
+		trlx = OR_TRLX;
+	else
+		trlx = 0;
+
+	if (trlx)
+		scy /= 2;
+
+	if (scy > 0xf)
+		scy = 0xf;
+	if (scy < 1)
+		scy = 1;
+
+	flash_or_timing = (scy << 4) | trlx |
+		(CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
+
+	memctl->memc_or0 =
+		flash_or_timing | (-flash_info[0].size & OR_AM_MSK);
+#else
+	memctl->memc_or0 =
+		CFG_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK);
+#endif
+	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
+	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
+	       memctl->memc_br0, memctl->memc_or0);
+
+	if (flash_info[1].size) {
+#ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
+		memctl->memc_or1 = flash_or_timing |
+			(-flash_info[1].size & 0xFFFF8000);
+#else
+		memctl->memc_or1 = CFG_OR_TIMING_FLASH |
+			(-flash_info[1].size & 0xFFFF8000);
+#endif
+		memctl->memc_br1 =
+			((CFG_FLASH_BASE +
+			  flash_info[0].
+			  size) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
+		       memctl->memc_br1, memctl->memc_or1);
+	} else {
+		memctl->memc_br1 = 0;	/* invalidate bank */
+
+		debug ("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
+		       memctl->memc_br1, memctl->memc_or1);
+	}
+
+# ifdef CONFIG_IDE_LED
 	/* Configure PA15 as output port */
 	immap->im_ioport.iop_padir |= 0x0001;
 	immap->im_ioport.iop_paodr |= 0x0001;
 	immap->im_ioport.iop_papar &= ~0x0001;
 	immap->im_ioport.iop_padat &= ~0x0001;	/* turn it off */
 # endif
+
+#ifdef CONFIG_NSCU
+	/* wake up ethernet module */
+	immap->im_ioport.iop_pcpar &= ~0x0004;	/* GPIO pin      */
+	immap->im_ioport.iop_pcdir |= 0x0004;	/* output        */
+	immap->im_ioport.iop_pcso &= ~0x0004;	/* for clarity   */
+	immap->im_ioport.iop_pcdat |= 0x0004;	/* enable        */
+#endif /* CONFIG_NSCU */
+
 	return (0);
 }
+#endif	/* CONFIG_MISC_INIT_R */
+
 
 # ifdef CONFIG_IDE_LED
 void ide_led (uchar led, uchar status)
@@ -483,26 +567,6 @@ void ide_led (uchar led, uchar status)
 	}
 }
 # endif
-#endif	/* CONFIG_HMI10 */
-
-/* ---------------------------------------------------------------------------- */
-/* NSCU specific stuff								*/
-/* ---------------------------------------------------------------------------- */
-#ifdef CONFIG_NSCU
-
-int misc_init_r (void)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
-	/* wake up ethernet module */
-	immr->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin	*/
-	immr->im_ioport.iop_pcdir |=  0x0004; /* output		*/
-	immr->im_ioport.iop_pcso  &= ~0x0004; /* for clarity	*/
-	immr->im_ioport.iop_pcdat |=  0x0004; /* enable		*/
-
-	return (0);
-}
-#endif	/* CONFIG_NSCU */
 
 /* ---------------------------------------------------------------------------- */
 /* TK885D specific initializaion						*/
@@ -548,7 +612,4 @@ int last_stage_init(void)
 
 	return 0;
 }
-
 #endif
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/sh4/watchdog.c b/cpu/sh4/watchdog.c
index 346e21714f..f6924290f0 100644
--- a/cpu/sh4/watchdog.c
+++ b/cpu/sh4/watchdog.c
@@ -17,34 +17,55 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #define WDT_BASE	WTCNT
 
-static unsigned char cnt_read (void){
-	return *((volatile unsigned char *)(WDT_BASE + 0x00));
+#define WDT_WD		(1 << 6)
+#define WDT_RST_P	(0)
+#define WDT_RST_M	(1 << 5)
+#define WDT_ENABLE	(1 << 7)
+
+#if defined(CONFIG_WATCHDOG)
+static unsigned char csr_read(void)
+{
+	return inb(WDT_BASE + 0x04);
 }
 
-static unsigned char csr_read (void){
-	return *((volatile unsigned char *)(WDT_BASE + 0x04));
+static void cnt_write(unsigned char value)
+{
+	outl((unsigned short)value | 0x5A00, WDT_BASE + 0x00);
 }
 
-static void cnt_write (unsigned char value){
-	while (csr_read() & (1 << 5)) {
-		/* delay */
-	}
-	*((volatile unsigned short *)(WDT_BASE + 0x00))
-		= ((unsigned short) value) | 0x5A00;
+static void csr_write(unsigned char value)
+{
+	outl((unsigned short)value | 0xA500, WDT_BASE + 0x04);
 }
 
-static void csr_write (unsigned char value){
-	*((volatile unsigned short *)(WDT_BASE + 0x04))
-		= ((unsigned short) value) | 0xA500;
+void watchdog_reset(void)
+{
+	outl(0x55000000, WDT_BASE + 0x08);
 }
 
+int watchdog_init(void)
+{
+	/* Set overflow time*/
+	cnt_write(0);
+	/* Power on reset */
+	csr_write(WDT_WD|WDT_RST_P|WDT_ENABLE);
+
+	return 0;
+}
 
-int watchdog_init (void){ return 0; }
+int watchdog_disable(void)
+{
+	csr_write(csr_read() & ~WDT_ENABLE);
+	return 0;
+}
+#endif
 
-void reset_cpu (unsigned long ignored)
+void reset_cpu(unsigned long ignored)
 {
-	while(1);
+	while (1)
+		;
 }
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index f81211adb9..8ab6d07303 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -283,11 +283,13 @@ uint tsec_local_mdio_read(volatile tsec_t *phyregs, uint phyid, uint regnum)
 /* Configure the TBI for SGMII operation */
 static void tsec_configure_serdes(struct tsec_private *priv)
 {
-	tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_ANA,
+	/* Access TBI PHY registers at given TSEC register offset as opposed to the
+	 * register offset used for external PHY accesses */
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_ANA,
 			TBIANA_SETTINGS);
-	tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_TBICON,
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_TBICON,
 			TBICON_CLK_SELECT);
-	tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_CR,
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_CR,
 			TBICR_SETTINGS);
 }
 
diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c
index a058e1d37f..e3a0ea0047 100644
--- a/drivers/pci/pci_sh7751.c
+++ b/drivers/pci/pci_sh7751.c
@@ -23,18 +23,19 @@
  */
 
 #include <common.h>
+#include <pci.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <pci.h>
+#include <asm/pci.h>
 
 /* Register addresses and such */
 #define SH7751_BCR1	(vu_long *)0xFF800000
-#define SH7751_BCR2	(vu_short*)0xFF800004
+#define SH7751_BCR2	(vu_short *)0xFF800004
 #define SH7751_WCR1	(vu_long *)0xFF800008
 #define SH7751_WCR2	(vu_long *)0xFF80000C
 #define SH7751_WCR3	(vu_long *)0xFF800010
 #define SH7751_MCR	(vu_long *)0xFF800014
-#define SH7751_BCR3	(vu_short*)0xFF800050
+#define SH7751_BCR3	(vu_short *)0xFF800050
 #define SH7751_PCICONF0 (vu_long *)0xFE200000
 #define SH7751_PCICONF1 (vu_long *)0xFE200004
 #define SH7751_PCICONF2 (vu_long *)0xFE200008
@@ -87,12 +88,12 @@
 #define SH7751_PCIPAR   (vu_long *)0xFE2001C0
 #define SH7751_PCIPDR   (vu_long *)0xFE200220
 
-#define p4_in(addr)     *(addr)
-#define p4_out(data,addr) *(addr) = (data)
+#define p4_in(addr)	(*addr)
+#define p4_out(data, addr) (*addr) = (data)
 
 /* Double word */
 int pci_sh4_read_config_dword(struct pci_controller *hose,
-			      pci_dev_t dev, int offset, u32 * value)
+			      pci_dev_t dev, int offset, u32 *value)
 {
 	u32 par_data = 0x80000000 | dev;
 
@@ -103,7 +104,7 @@ int pci_sh4_read_config_dword(struct pci_controller *hose,
 }
 
 int pci_sh4_write_config_dword(struct pci_controller *hose,
-			       pci_dev_t dev, int offset, u32 * value)
+			       pci_dev_t dev, int offset, u32 value)
 {
 	u32 par_data = 0x80000000 | dev;
 
@@ -126,15 +127,18 @@ int pci_sh7751_init(struct pci_controller *hose)
 	/* Double-check some BSC config settings */
 	/* (Area 3 non-MPX 32-bit, PCI bus pins) */
 	if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
-		printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1));
+		printf("SH7751_BCR1 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR1));
 		return 2;
 	}
 	if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
-		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR2));
 		return 3;
 	}
 	if (p4_in(SH7751_BCR2) & 0x01) {
-		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR2));
 		return 4;
 	}
 
diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c
index 2d04b4fc61..7555d96060 100644
--- a/drivers/pci/pci_sh7780.c
+++ b/drivers/pci/pci_sh7780.c
@@ -25,9 +25,10 @@
 
 #include <common.h>
 
+#include <pci.h>
 #include <asm/processor.h>
+#include <asm/pci.h>
 #include <asm/io.h>
-#include <pci.h>
 
 #define SH7780_VENDOR_ID	0x1912
 #define SH7780_DEVICE_ID	0x0002
@@ -41,10 +42,10 @@
 #define SH7780_PCICR_PRST	0x00000002
 #define SH7780_PCICR_CFIN	0x00000001
 
-#define p4_in(addr)			*((vu_long *)addr)
-#define p4_out(data,addr)	*(vu_long *)(addr) = (data)
-#define p4_inw(addr)		*((vu_short *)addr)
-#define p4_outw(data,addr)	*(vu_short *)(addr) = (data)
+#define p4_in(addr)			(*(vu_long *)addr)
+#define p4_out(data, addr)	(*(vu_long *)addr) = (data)
+#define p4_inw(addr)		(*(vu_short *)addr)
+#define p4_outw(data, addr)	(*(vu_short *)addr) = (data)
 
 int pci_sh4_read_config_dword(struct pci_controller *hose,
 				    pci_dev_t dev, int offset, u32 *value)
@@ -72,9 +73,9 @@ int pci_sh7780_init(struct pci_controller *hose)
 	p4_out(0x01, SH7780_PCIECR);
 
 	if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
-	    && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){
+	    && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID) {
 		printf("PCI: Unknown PCI host bridge.\n");
-		return;
+		return -1;
 	}
 	printf("PCI: SH7780 PCI host bridge found.\n");
 
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 61c2b82c0a..f30532b5ab 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -76,7 +76,7 @@
 # define FIFOLEVEL_MASK	0xFF
 # endif
 #elif defined(CONFIG_CPU_SH7723)
-# if defined(CONIFG_SCIF_A)
+# if defined(CONFIG_SCIF_A)
 # define SCLSR	SCFSR
 # define LSR_ORER	0x0200
 # define FIFOLEVEL_MASK	0x3F
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
index 25b409b6b0..2cfc0a7944 100644
--- a/include/asm-sh/cache.h
+++ b/include/asm-sh/cache.h
@@ -3,29 +3,31 @@
 
 #if defined(CONFIG_SH4) || defined(CONFIG_SH4A)
 
+int cache_control(unsigned int cmd);
+
 #define L1_CACHE_BYTES 32
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
-void dcache_wback_range (u32 start, u32 end)
+void dcache_wback_range(u32 start, u32 end)
 {
 	u32 v;
 
 	start &= ~(L1_CACHE_BYTES - 1);
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
-		asm volatile ("ocbwb     %0":	/* no output */
-			      :"m" (__m (v)));
+		asm volatile ("ocbwb     %0" :	/* no output */
+			      : "m" (__m(v)));
 	}
 }
 
-void dcache_invalid_range (u32 start, u32 end)
+void dcache_invalid_range(u32 start, u32 end)
 {
 	u32 v;
 
 	start &= ~(L1_CACHE_BYTES - 1);
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
-		asm volatile ("ocbi     %0":	/* no output */
-			      :"m" (__m (v)));
+		asm volatile ("ocbi     %0" :	/* no output */
+			      : "m" (__m(v)));
 	}
 }
 #endif /* CONFIG_SH4 || CONFIG_SH4A */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 740029300c..adc3f81ed6 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -34,9 +34,9 @@
 #define __arch_getw(a)			(*(volatile unsigned short *)(a))
 #define __arch_getl(a)			(*(volatile unsigned int *)(a))
 
-#define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
-#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
-#define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+#define __arch_putb(v, a)		(*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v, a)		(*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v, a)		(*(volatile unsigned int *)(a) = (v))
 
 extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
 extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
@@ -46,9 +46,9 @@ extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
 extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
 extern void __raw_readsl(unsigned int addr, void *data, int longlen);
 
-#define __raw_writeb(v,a)		__arch_putb(v,a)
-#define __raw_writew(v,a)		__arch_putw(v,a)
-#define __raw_writel(v,a)		__arch_putl(v,a)
+#define __raw_writeb(v, a)		__arch_putb(v, a)
+#define __raw_writew(v, a)		__arch_putw(v, a)
+#define __raw_writel(v, a)		__arch_putl(v, a)
 
 #define __raw_readb(a)			__arch_getb(a)
 #define __raw_readw(a)			__arch_getw(a)
@@ -59,13 +59,13 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  * properly.  Spell it out to the compiler in some cases.
  * These are only valid for small values of "off" (< 1<<12)
  */
-#define __raw_base_writeb(val,base,off)	__arch_base_putb(val,base,off)
-#define __raw_base_writew(val,base,off)	__arch_base_putw(val,base,off)
-#define __raw_base_writel(val,base,off)	__arch_base_putl(val,base,off)
+#define __raw_base_writeb(val, base, off)	__arch_base_putb(val, base, off)
+#define __raw_base_writew(val, base, off)	__arch_base_putw(val, base, off)
+#define __raw_base_writel(val, base, off)	__arch_base_putl(val, base, off)
 
-#define __raw_base_readb(base,off)	__arch_base_getb(base,off)
-#define __raw_base_readw(base,off)	__arch_base_getw(base,off)
-#define __raw_base_readl(base,off)	__arch_base_getl(base,off)
+#define __raw_base_readb(base, off)	__arch_base_getb(base, off)
+#define __raw_base_readw(base, off)	__arch_base_getw(base, off)
+#define __raw_base_readl(base, off)	__arch_base_getl(base, off)
 
 /*
  * Now, pick up the machine-defined IO definitions
@@ -91,36 +91,43 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  *
  * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
  */
-#define outb(v,p)               __raw_writeb(v, p)
-#define outw(v,p)               __raw_writew(cpu_to_le16(v),p)
-#define outl(v,p)               __raw_writel(cpu_to_le32(v),p)
+#define outb(v, p)               __raw_writeb(v, p)
+#define outw(v, p)               __raw_writew(cpu_to_le16(v), p)
+#define outl(v, p)               __raw_writel(cpu_to_le32(v), p)
 
 #define inb(p)  ({ unsigned int __v = __raw_readb(p); __v; })
 #define inw(p)  ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
 #define inl(p)  ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
 
-#define outsb(p,d,l)			__raw_writesb(p,d,l)
-#define outsw(p,d,l)			__raw_writesw(p,d,l)
-#define outsl(p,d,l)			__raw_writesl(p,d,l)
+#define outsb(p, d, l)			__raw_writesb(p, d, l)
+#define outsw(p, d, l)			__raw_writesw(p, d, l)
+#define outsl(p, d, l)			__raw_writesl(p, d, l)
 
-#define insb(p,d,l)			__raw_readsb(p,d,l)
-#define insw(p,d,l)			__raw_readsw(p,d,l)
-#define insl(p,d,l)			__raw_readsl(p,d,l)
+#define insb(p, d, l)			__raw_readsb(p, d, l)
+#define insw(p, d, l)			__raw_readsw(p, d, l)
+#define insl(p, d, l)			__raw_readsl(p, d, l)
 
-#define outb_p(val,port)		outb((val),(port))
-#define outw_p(val,port)		outw((val),(port))
-#define outl_p(val,port)		outl((val),(port))
+#define outb_p(val, port)		outb((val), (port))
+#define outw_p(val, port)		outw((val), (port))
+#define outl_p(val, port)		outl((val), (port))
 #define inb_p(port)			inb((port))
 #define inw_p(port)			inw((port))
 #define inl_p(port)			inl((port))
 
-#define outsb_p(port,from,len)		outsb(port,from,len)
-#define outsw_p(port,from,len)		outsw(port,from,len)
-#define outsl_p(port,from,len)		outsl(port,from,len)
-#define insb_p(port,to,len)		insb(port,to,len)
-#define insw_p(port,to,len)		insw(port,to,len)
-#define insl_p(port,to,len)		insl(port,to,len)
-
+#define outsb_p(port, from, len)		outsb(port, from, len)
+#define outsw_p(port, from, len)		outsw(port, from, len)
+#define outsl_p(port, from, len)		outsl(port, from, len)
+#define insb_p(port, to, len)		insb(port, to, len)
+#define insw_p(port, to, len)		insw(port, to, len)
+#define insl_p(port, to, len)		insl(port, to, len)
+
+/* for U-Boot PCI */
+#define out_8(port, val)	outb(val, port)
+#define out_le16(port, val)	outw(val, port)
+#define out_le32(port, val)	outl(val, port)
+#define in_8(port)			inb(port)
+#define in_le16(port)		inw(port)
+#define in_le32(port)		inl(port)
 /*
  * ioremap and friends.
  *
@@ -128,7 +135,7 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  * linux/Documentation/IO-mapping.txt.  If you want a
  * physical address, use __ioremap instead.
  */
-extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags);
+extern void *__ioremap(unsigned long offset, size_t size, unsigned long flags);
 extern void __iounmap(void *addr);
 
 /*
@@ -139,20 +146,20 @@ extern void __iounmap(void *addr);
  *  iomem_to_phys(off)
  */
 #ifdef iomem_valid_addr
-#define __arch_ioremap(off,sz,nocache)				\
+#define __arch_ioremap(off, sz, nocache)				\
  ({								\
 	unsigned long _off = (off), _size = (sz);		\
 	void *_ret = (void *)0;					\
 	if (iomem_valid_addr(_off, _size))			\
-		_ret = __ioremap(iomem_to_phys(_off),_size,0);	\
+		_ret = __ioremap(iomem_to_phys(_off), _size, 0);	\
 	_ret;							\
  })
 
 #define __arch_iounmap __iounmap
 #endif
 
-#define ioremap(off,sz)			__arch_ioremap((off),(sz),0)
-#define ioremap_nocache(off,sz)		__arch_ioremap((off),(sz),1)
+#define ioremap(off, sz)			__arch_ioremap((off), (sz), 0)
+#define ioremap_nocache(off, sz)		__arch_ioremap((off), (sz), 1)
 #define iounmap(_addr)			__arch_iounmap(_addr)
 
 /*
@@ -180,19 +187,21 @@ extern void _memset_io(unsigned long, int, size_t);
 #ifdef __mem_pci
 
 #define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+#define readw(c)\
+	({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c)\
+	({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
+#define writeb(v, c)		__raw_writeb(v, __mem_pci(c))
+#define writew(v, c)		__raw_writew(cpu_to_le16(v), __mem_pci(c))
+#define writel(v, c)		__raw_writel(cpu_to_le32(v), __mem_pci(c))
 
-#define memset_io(c,v,l)		_memset_io(__mem_pci(c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),__mem_pci(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio(__mem_pci(c),(a),(l))
+#define memset_io(c, v, l)		_memset_io(__mem_pci(c), (v), (l))
+#define memcpy_fromio(a, c, l)	_memcpy_fromio((a), __mem_pci(c), (l))
+#define memcpy_toio(c, a, l)	_memcpy_toio(__mem_pci(c), (a), (l))
 
-#define eth_io_copy_and_sum(s,c,l,b) \
-				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+#define eth_io_copy_and_sum(s, c, l, b) \
+				eth_copy_and_sum((s), __mem_pci(c), (l), (b))
 
 static inline int
 check_signature(unsigned long io_addr, const unsigned char *signature,
@@ -216,11 +225,11 @@ out:
 #define readb(addr)	__raw_readb(addr)
 #define readw(addr)	__raw_readw(addr)
 #define readl(addr)	__raw_readl(addr)
-#define writeb(v,addr)	__raw_writeb(v, addr)
-#define writew(v,addr)	__raw_writew(v, addr)
-#define writel(v,addr)	__raw_writel(v, addr)
+#define writeb(v, addr)	__raw_writeb(v, addr)
+#define writew(v, addr)	__raw_writew(v, addr)
+#define writel(v, addr)	__raw_writel(v, addr)
 
-#define check_signature(io,sig,len)	(0)
+#define check_signature(io, sig, len)	(0)
 
 #endif	/* __mem_pci */
 
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index bc59491c8a..040c532132 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -36,6 +36,7 @@ int pci_sh7780_init(struct pci_controller *hose);
 #error "Not support PCI."
 #endif
 
+int pci_sh4_init(struct pci_controller *hose);
 /* PCI dword read for sh4 */
 int pci_sh4_read_config_dword(struct pci_controller *hose,
 		pci_dev_t dev, int offset, u32 *value);
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index dd8051d637..c9d6c91291 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -211,6 +211,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 1af28b39f5..bf20a0d733 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -211,6 +211,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 807781c1c2..c58cb8c52a 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index d30c7bcf47..c896b58638 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -157,16 +157,21 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_OFFSET	0x8000	/*   Offset   of Environment Sector	*/
 #define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 631190295c..dc4582ff5b 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -225,6 +225,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 53272e1722..7ea73427b9 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -221,6 +221,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 812cea16c0..473c390066 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -210,6 +210,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 512c55dc0c..4de5a33aa4 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -210,6 +210,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 36e2fbf2e2..2ba94c8cc3 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -215,6 +215,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 2da1f3ae09..7699d51c07 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -250,6 +250,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 87462a5611..23d0dd6c89 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -214,6 +214,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 9dc874550c..e8d2ec43d7 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -215,6 +215,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index c039e9d3e3..74c815b88a 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -218,6 +218,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index cc5ee6da07..a5fc38db03 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -219,6 +219,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index bf3bbb264a..9e14d995ab 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -259,6 +259,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index d99f23fcd0..d6f7e02bc8 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -421,7 +421,7 @@
 
 #define CONFIG_HOSTNAME		ads5121
 #define CONFIG_BOOTFILE		ads5121/uImage
-#define CONFIG_ROOTPATH		/opt/eldk/pcc_6xx
+#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
 
 #define CONFIG_LOADADDR		400000	/* default location for tftp and bootm */
 
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 10dbed96ff..f3f43c3d26 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -219,6 +219,8 @@
 
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
+
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
diff --git a/lib_sh/board.c b/lib_sh/board.c
index eb81bd97ec..6dfab4ec9e 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -23,6 +23,7 @@
 #include <malloc.h>
 #include <devices.h>
 #include <version.h>
+#include <watchdog.h>
 #include <net.h>
 #include <environment.h>
 
@@ -30,7 +31,6 @@ extern void malloc_bin_reloc (void);
 extern int cpu_init(void);
 extern int board_init(void);
 extern int dram_init(void);
-extern int watchdog_init(void);
 extern int timer_init(void);
 
 const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
@@ -41,17 +41,17 @@ static unsigned long mem_malloc_start;
 static unsigned long mem_malloc_end;
 static unsigned long mem_malloc_brk;
 
-static void mem_malloc_init (void)
+static void mem_malloc_init(void)
 {
 
 	mem_malloc_start = (TEXT_BASE - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN);
 	mem_malloc_end = (mem_malloc_start + CFG_MALLOC_LEN - 16);
 	mem_malloc_brk = mem_malloc_start;
-	memset ((void *) mem_malloc_start, 0,
+	memset((void *) mem_malloc_start, 0,
 		(mem_malloc_end - mem_malloc_start));
 }
 
-void *sbrk (ptrdiff_t increment)
+void *sbrk(ptrdiff_t increment)
 {
 	unsigned long old = mem_malloc_brk;
 	unsigned long new = old + increment;
@@ -70,37 +70,45 @@ static int sh_flash_init(void)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	gd->bd->bi_flashsize = flash_init();
-	printf("FLASH: %dMB\n", gd->bd->bi_flashsize / (1024*1024));
+	printf("FLASH: %ldMB\n", gd->bd->bi_flashsize / (1024*1024));
 
 	return 0;
 }
 
 #if defined(CONFIG_CMD_NAND)
-#include <nand.h>
-static int sh_nand_init(void)
-{
-	printf("NAND: ");
-	nand_init();	/* go init the NAND */
-	return 0;
-}
+# include <nand.h>
+# define INIT_FUNC_NAND_INIT nand_init,
+#else
+# define INIT_FUNC_NAND_INIT
 #endif /* CONFIG_CMD_NAND */
 
+#if defined(CONFIG_WATCHDOG)
+extern int watchdog_init(void);
+extern int watchdog_disable(void);
+# define INIT_FUNC_WATCHDOG_INIT	watchdog_init,
+# define WATCHDOG_DISABLE       	watchdog_disable
+#else
+# define INIT_FUNC_WATCHDOG_INIT
+# define WATCHDOG_DISABLE
+#endif /* CONFIG_WATCHDOG */
+
 #if defined(CONFIG_CMD_IDE)
-#include <ide.h>
-static int sh_marubun_init(void)
-{
-	puts ("IDE:   ");
-	ide_init();
-	return 0;
-}
-#endif /* (CONFIG_CMD_IDE) */
+# include <ide.h>
+# define INIT_FUNC_IDE_INIT	ide_init,
+#else
+# define INIT_FUNC_IDE_INIT
+#endif /* CONFIG_CMD_IDE */
 
 #if defined(CONFIG_PCI)
+#include <pci.h>
 static int sh_pci_init(void)
 {
 	pci_init();
 	return 0;
 }
+# define INIT_FUNC_PCI_INIT sh_pci_init,
+#else
+# define INIT_FUNC_PCI_INIT
 #endif /* CONFIG_PCI */
 
 static int sh_mem_env_init(void)
@@ -123,7 +131,8 @@ static int sh_net_init(void)
 	s = getenv("ethaddr");
 	for (i = 0; i < 6; ++i) {
 		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
-		if (s) s = (*e) ? e + 1 : e;
+		if (s)
+			s = (*e) ? e + 1 : e;
 	}
 
 	return 0;
@@ -136,24 +145,20 @@ init_fnc_t *init_sequence[] =
 {
 	cpu_init,		/* basic cpu dependent setup */
 	board_init,		/* basic board dependent setup */
-	interrupt_init,		/* set up exceptions */
+	interrupt_init,	/* set up exceptions */
 	env_init,		/* event init */
-	serial_init,		/* SCIF init */
-	watchdog_init,		/* watchdog init */
+	serial_init,	/* SCIF init */
+	INIT_FUNC_WATCHDOG_INIT	/* watchdog init */
 	console_init_f,
 	display_options,
 	checkcpu,
 	checkboard,		/* Check support board */
 	dram_init,		/* SDRAM init */
 	timer_init,		/* SuperH Timer (TCNT0 only) init */
-	sh_flash_init,		/* Flash memory(NOR) init*/
+	sh_flash_init,	/* Flash memory(NOR) init*/
 	sh_mem_env_init,
-#if defined(CONFIG_CMD_NAND)
-	sh_nand_init,		/* Flash memory (NAND) init */
-#endif
-#if defined(CONFIG_PCI)
-	sh_pci_init,		/* PCI Init */
-#endif
+	INIT_FUNC_NAND_INIT/* Flash memory (NAND) init */
+	INIT_FUNC_PCI_INIT	/* PCI init */
 	devices_init,
 	console_init_r,
 	interrupt_init,
@@ -166,20 +171,18 @@ init_fnc_t *init_sequence[] =
 	NULL			/* Terminate this list */
 };
 
-void sh_generic_init (void)
+void sh_generic_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	int i;
-	char *s;
 
-	memset (gd, 0, CFG_GBL_DATA_SIZE);
+	memset(gd, 0, CFG_GBL_DATA_SIZE);
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
-	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
+	gd->bd = (bd_t *)(gd + 1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 
 	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
@@ -189,35 +192,51 @@ void sh_generic_init (void)
 	bd->bi_memsize = CFG_SDRAM_SIZE;
 	bd->bi_flashstart = CFG_FLASH_BASE;
 #if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
-	bd->bi_sramstart= CFG_SRAM_BASE;
+	bd->bi_sramstart = CFG_SRAM_BASE;
 	bd->bi_sramsize	= CFG_SRAM_SIZE;
 #endif
 	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr , i++) {
-		if ((*init_fnc_ptr) () != 0) {
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		WATCHDOG_RESET();
+		if ((*init_fnc_ptr) () != 0)
 			hang();
-		}
 	}
 
-#if defined(CONFIG_CMD_NET)
-	puts ("Net:   ");
-	eth_initialize(gd->bd);
+#ifdef CONFIG_WATCHDOG
+	/* disable watchdog if environment is set */
+	{
+		char *s = getenv("watchdog");
+		if (s != NULL)
+			if (strncmp(s, "off", 3) == 0)
+				WATCHDOG_DISABLE();
+	}
+#endif /* CONFIG_WATCHDOG*/
 
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
+
+#if defined(CONFIG_CMD_NET)
+	{
+		char *s;
+		puts("Net:   ");
+		eth_initialize(gd->bd);
+
+		s = getenv("bootfile");
+		if (s != NULL)
+			copy_filename(BootFile, s, sizeof(BootFile));
 	}
 #endif /* CONFIG_CMD_NET */
 
 	while (1) {
+		WATCHDOG_RESET();
 		main_loop();
 	}
 }
 
 /***********************************************************************/
 
-void hang (void)
+void hang(void)
 {
-	puts ("Board ERROR\n");
-	for (;;);
+	puts("Board ERROR\n");
+	for (;;)
+		;
 }
diff --git a/lib_sh/bootm.c b/lib_sh/bootm.c
index bc1c3da9e2..e3d49855a8 100644
--- a/lib_sh/bootm.c
+++ b/lib_sh/bootm.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (c) Copyright 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * (c) Copyright 2008 Renesas Solutions Corp.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,47 +28,37 @@
 #include <command.h>
 #include <asm/byteorder.h>
 
-/* The SH kernel reads arguments from the empty zero page at location
- * 0 at the start of SDRAM. The following are copied from
- * arch/sh/kernel/setup.c and may require tweaking if the kernel sources
- * change.
- */
-#define PARAM	((unsigned char *)CFG_SDRAM_BASE + 0x1000)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-
 #ifdef CFG_DEBUG
-static void hexdump (unsigned char *buf, int len)
+static void hexdump(unsigned char *buf, int len)
 {
 	int i;
 
 	for (i = 0; i < len; i++) {
 		if ((i % 16) == 0)
-			printf ("%s%08x: ", i ? "\n" : "", (unsigned int) &buf[i]);
-		printf ("%02x ", buf[i]);
+			printf("%s%08x: ", i ? "\n" : "",
+							(unsigned int)&buf[i]);
+		printf("%02x ", buf[i]);
 	}
-	printf ("\n");
+	printf("\n");
 }
 #endif
 
 int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
-	char	*bootargs = getenv("bootargs");
-
+	/* Linux kernel load address */
 	void (*kernel) (void) = (void (*)(void))images->ep;
+	/* empty_zero_page */
+	unsigned char *param
+		= (unsigned char *)image_get_load(images->legacy_hdr_os);
+	/* Linux kernel command line */
+	char *cmdline = (char *)param + 0x100;
+	/* PAGE_SIZE */
+	unsigned long size = images->ep - (unsigned long)param;
+	char *bootargs = getenv("bootargs");
 
 	/* Setup parameters */
-	memset(PARAM, 0, 0x1000);	/* Clear zero page */
-	strcpy(COMMAND_LINE, bootargs);
+	memset(param, 0, size);	/* Clear zero page */
+	strcpy(cmdline, bootargs);
 
 	kernel();
 	/* does not return */