ARM: AM57xx: AM43xx: Fix USB host

CONFIG_USB_XHCI_OMAP can be set for host mode without setting
CONFIG_USB_DWC3 which is meant for gadget mode only.
board_usb_init() was not being defined for CONFIG_USB_XHCI_OMAP
resulting in a data abort on usb start.

Define board_usb_init() for CONFIG_USB_XHCI_OMAP case. Move
gadget specific handling to within CONFIG_USB_DWC3.

Fixes: 6f1af1e358b7 ("board: ti: invoke clock API to enable and disable clocks")
Signed-off-by: Roger Quadros <rogerq@ti.com>

2 files changed, 55 insertions, 57 deletions

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index b42546a148..bde5ac7c99 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -678,71 +678,71 @@ static struct ti_usb_phy_device usb_phy2_device = {
 	.index = 1,
 };
 
+int usb_gadget_handle_interrupts(int index)
+{
+	u32 status;
+
+	status = dwc3_omap_uboot_interrupt_status(index);
+	if (status)
+		dwc3_uboot_handle_interrupt(index);
+
+	return 0;
+}
+#endif /* CONFIG_USB_DWC3 */
+
+#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
 int board_usb_init(int index, enum usb_init_type init)
 {
 	enable_usb_clocks(index);
+#ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 		if (init == USB_INIT_DEVICE) {
 			usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
 			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
-		} else {
-			usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
-			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+			dwc3_omap_uboot_init(&usb_otg_ss1_glue);
+			ti_usb_phy_uboot_init(&usb_phy1_device);
+			dwc3_uboot_init(&usb_otg_ss1);
 		}
-
-		dwc3_omap_uboot_init(&usb_otg_ss1_glue);
-		ti_usb_phy_uboot_init(&usb_phy1_device);
-		dwc3_uboot_init(&usb_otg_ss1);
 		break;
 	case 1:
 		if (init == USB_INIT_DEVICE) {
 			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
 			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
-		} else {
-			usb_otg_ss2.dr_mode = USB_DR_MODE_HOST;
-			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+			ti_usb_phy_uboot_init(&usb_phy2_device);
+			dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+			dwc3_uboot_init(&usb_otg_ss2);
 		}
-
-		ti_usb_phy_uboot_init(&usb_phy2_device);
-		dwc3_omap_uboot_init(&usb_otg_ss2_glue);
-		dwc3_uboot_init(&usb_otg_ss2);
 		break;
 	default:
 		printf("Invalid Controller Index\n");
 	}
+#endif
 
 	return 0;
 }
 
 int board_usb_cleanup(int index, enum usb_init_type init)
 {
+#ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 	case 1:
-		ti_usb_phy_uboot_exit(index);
-		dwc3_uboot_exit(index);
-		dwc3_omap_uboot_exit(index);
+		if (init == USB_INIT_DEVICE) {
+			ti_usb_phy_uboot_exit(index);
+			dwc3_uboot_exit(index);
+			dwc3_omap_uboot_exit(index);
+		}
 		break;
 	default:
 		printf("Invalid Controller Index\n");
 	}
+#endif
 	disable_usb_clocks(index);
 
 	return 0;
 }
-
-int usb_gadget_handle_interrupts(int index)
-{
-	u32 status;
-
-	status = dwc3_omap_uboot_interrupt_status(index);
-	if (status)
-		dwc3_uboot_handle_interrupt(index);
-
-	return 0;
-}
-#endif
+#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 9904047a07..7142a92fb3 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -439,6 +439,19 @@ static struct ti_usb_phy_device usb_phy2_device = {
 	.index = 1,
 };
 
+int usb_gadget_handle_interrupts(int index)
+{
+	u32 status;
+
+	status = dwc3_omap_uboot_interrupt_status(index);
+	if (status)
+		dwc3_uboot_handle_interrupt(index);
+
+	return 0;
+}
+#endif /* CONFIG_USB_DWC3 */
+
+#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
 int board_usb_init(int index, enum usb_init_type init)
 {
 	enable_usb_clocks(index);
@@ -448,31 +461,23 @@ int board_usb_init(int index, enum usb_init_type init)
 			printf("port %d can't be used as device\n", index);
 			disable_usb_clocks(index);
 			return -EINVAL;
-		} else {
-			usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
-			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
-			setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
-				     OTG_SS_CLKCTRL_MODULEMODE_HW |
-				     OPTFCLKEN_REFCLK960M);
 		}
-
-		ti_usb_phy_uboot_init(&usb_phy1_device);
-		dwc3_omap_uboot_init(&usb_otg_ss1_glue);
-		dwc3_uboot_init(&usb_otg_ss1);
 		break;
 	case 1:
 		if (init == USB_INIT_DEVICE) {
+#ifdef CONFIG_USB_DWC3
 			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
 			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+			ti_usb_phy_uboot_init(&usb_phy2_device);
+			dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+			dwc3_uboot_init(&usb_otg_ss2);
+#endif
 		} else {
 			printf("port %d can't be used as host\n", index);
 			disable_usb_clocks(index);
 			return -EINVAL;
 		}
 
-		ti_usb_phy_uboot_init(&usb_phy2_device);
-		dwc3_omap_uboot_init(&usb_otg_ss2_glue);
-		dwc3_uboot_init(&usb_otg_ss2);
 		break;
 	default:
 		printf("Invalid Controller Index\n");
@@ -483,31 +488,24 @@ int board_usb_init(int index, enum usb_init_type init)
 
 int board_usb_cleanup(int index, enum usb_init_type init)
 {
+#ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 	case 1:
-		ti_usb_phy_uboot_exit(index);
-		dwc3_uboot_exit(index);
-		dwc3_omap_uboot_exit(index);
+		if (init == USB_INIT_DEVICE) {
+			ti_usb_phy_uboot_exit(index);
+			dwc3_uboot_exit(index);
+			dwc3_omap_uboot_exit(index);
+		}
 		break;
 	default:
 		printf("Invalid Controller Index\n");
 	}
+#endif
 	disable_usb_clocks(index);
 	return 0;
 }
-
-int usb_gadget_handle_interrupts(int index)
-{
-	u32 status;
-
-	status = dwc3_omap_uboot_interrupt_status(index);
-	if (status)
-		dwc3_uboot_handle_interrupt(index);
-
-	return 0;
-}
-#endif
+#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
 
 #ifdef CONFIG_DRIVER_TI_CPSW