doc: board: Add Intel Cherry Hill board doc

This extracts Intel Cherry Hill board specific information from
README.x86, converts plain text documentation to reST format and
adds it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

3 files changed, 31 insertions, 29 deletions

diff --git a/doc/README.x86 b/doc/README.x86
index b4f0f7c345..8e549c3313 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -226,35 +226,6 @@ to the last 2MB of the 8MB chip, address range [600000, 7FFFFF].
 
 ---
 
-Intel Cherry Hill specific instructions for bare mode:
-
-This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
-put the .fd file to the board directory and rename it to fsp.bin.
-
-Extract descriptor.bin and me.bin from the original BIOS on the board using
-ifdtool and put them to the board directory as well.
-
-Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
-image for the integrated graphics device. Instead a new binary called Video
-BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
-vbt.bin if you want graphics support in U-Boot.
-
-Now you can build U-Boot and obtain u-boot.rom
-
-$ make cherryhill_defconfig
-$ make all
-
-An important note for programming u-boot.rom to the on-board SPI flash is that
-you need make sure the SPI flash's 'quad enable' bit in its status register
-matches the settings in the descriptor.bin, otherwise the board won't boot.
-
-For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
-status register by DediProg in: Config > Modify Status Register > Write Status
-Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
-persists in SPI flash part regardless of the u-boot.rom image burned.
-
----
-
 Intel Galileo instructions for bare mode:
 
 Only one binary blob is needed for Remote Management Unit (RMU) within Intel
diff --git a/doc/board/intel/cherryhill.rst b/doc/board/intel/cherryhill.rst
new file mode 100644
index 0000000000..151f0613f8
--- /dev/null
+++ b/doc/board/intel/cherryhill.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
+
+Cherry Hill CRB
+===============
+
+This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
+put the .fd file to the board directory and rename it to fsp.bin.
+
+Extract descriptor.bin and me.bin from the original BIOS on the board using
+ifdtool and put them to the board directory as well.
+
+Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
+image for the integrated graphics device. Instead a new binary called Video
+BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
+vbt.bin if you want graphics support in U-Boot.
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+   $ make cherryhill_defconfig
+   $ make all
+
+An important note for programming u-boot.rom to the on-board SPI flash is that
+you need make sure the SPI flash's 'quad enable' bit in its status register
+matches the settings in the descriptor.bin, otherwise the board won't boot.
+
+For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
+status register by DediProg in: Config > Modify Status Register > Write Status
+Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
+persists in SPI flash part regardless of the u-boot.rom image burned.
diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst
index af24760b78..d30debb7f0 100644
--- a/doc/board/intel/index.rst
+++ b/doc/board/intel/index.rst
@@ -7,5 +7,6 @@ Intel
    :maxdepth: 2
 
    bayleybay
+   cherryhill
    crownbay
    minnowmax