diff options
author | Tom Rini <trini@ti.com> | 2012-10-26 15:44:31 -0700 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2012-10-26 15:44:31 -0700 |
commit | 5bb3505fa867ded03cbee83f7722ab5182930637 (patch) | |
tree | 1830ce86f88d280eb1a004d3f954f684c548cdce | |
parent | 8440f18a4818d52ba51bb9f0b07ce6439f1b6a57 (diff) | |
parent | b68d6712c379735e886ef9c01b946bc36f295273 (diff) |
Merge branch 'master' of git://git.denx.de/u-boot-arm
102 files changed, 1193 insertions, 6264 deletions
@@ -79,11 +79,6 @@ N: Oliver Brown E: obrown@adventnetworks.com D: Port to the gw8260 board -N: Curt Brune -E: curt@cucy.com -D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC) -W: http://www.cucy.com - N: Jonathan De Bruyne E: jonathan.debruyne@siemens.atea.be D: Port to Siemens IAD210 board @@ -754,20 +754,6 @@ $(obj).boards.depend: boards.cfg lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') -#======================================================================== -# ARM -#======================================================================== - -SX1_stdout_serial_config \ -SX1_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ - echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - else \ - echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 - ######################################################################### ## ARM1176 Systems ######################################################################### diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index ce7b3c9c24..820614e0ea 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -27,34 +27,12 @@ */ /* - * CPU specific code + * cleanup_before_linux() - Prepare the CPU to jump to Linux + * + * This function is called just before we call Linux, it + * prepares the processor for linux */ - -#include <common.h> -#include <command.h> -#include <clps7111.h> -#include <asm/hardware.h> -#include <asm/system.h> - -int cleanup_before_linux (void) +int cleanup_before_linux(void) { - /* - * this function is called just before we call linux - * it prepares the processor for linux - * - * we turn off caches etc ... - * and we set the CPU-speed to 73 MHz - see start.S for details - */ - -#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292) - disable_interrupts (); - /* Nothing more needed */ -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No cleanup before linux for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_TEGRA) - /* No cleanup before linux for tegra as yet */ -#else -#error No cleanup_before_linux() defined for this CPU type -#endif return 0; } diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index c2f898f2cc..8e763b7788 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -26,267 +26,22 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <clps7111.h> -#include <asm/proc-armv/ptrace.h> -#include <asm/hardware.h> - -#ifndef CONFIG_NETARM -/* we always count down the max. */ -#define TIMER_LOAD_VAL 0xffff -/* macro to read the 16 bit timer */ -#define READ_TIMER (IO_TC1D & 0xffff) - -#ifdef CONFIG_LPC2292 -#undef READ_TIMER -#define READ_TIMER (0xFFFFFFFF - GET32(T0TC)) -#endif - -#else -#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE)) -#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL)) -#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS)) -#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK -#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK) -#endif - -#ifdef CONFIG_S3C4510B -/* require interrupts for the S3C4510B */ -# ifndef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B -# else -static struct _irq_handler IRQ_HANDLER[N_IRQS]; -# endif -#endif /* CONFIG_S3C4510B */ - #ifdef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { -#if defined(CONFIG_S3C4510B) - unsigned int pending; - - while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */ - IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data); - - /* clear pending interrupt */ - PUT_REG( REG_INTPEND, (1<<(pending>>2))); - } -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No do_irq() for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - - void (*pfnct)(void); - - pfnct = (void (*)(void))VICVectAddr; - - (*pfnct)(); -#else -#error do_irq() not defined for this CPU type -#endif -} -#endif - -#ifdef CONFIG_S3C4510B -static void default_isr( void *data) { - printf ("default_isr(): called for IRQ %d\n", (int)data); -} - -static void timer_isr( void *data) { - unsigned int *pTime = (unsigned int *)data; - - (*pTime)++; - if ( !(*pTime % (CONFIG_SYS_HZ/4))) { - /* toggle LED 0 */ - PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1); - } - } #endif -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* Use IntegratorAP routines in board/integratorap.c */ -#else - +#if defined(CONFIG_TEGRA) static ulong timestamp; static ulong lastdec; -#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B) -int arch_interrupt_init (void) -{ - int i; - - /* install default interrupt handlers */ - for ( i = 0; i < N_IRQS; i++) { - IRQ_HANDLER[i].m_data = (void *)i; - IRQ_HANDLER[i].m_func = default_isr; - } - - /* configure interrupts for IRQ mode */ - PUT_REG( REG_INTMODE, 0x0); - /* clear any pending interrupts */ - PUT_REG( REG_INTPEND, 0x1FFFFF); - - lastdec = 0; - - /* install interrupt handler for timer */ - IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp; - IRQ_HANDLER[INT_TIMER0].m_func = timer_isr; - - return 0; -} -#endif - int timer_init (void) { -#if defined(CONFIG_NETARM) - /* disable all interrupts */ - IRQEN = 0; - - /* operate timer 2 in non-prescale mode */ - TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) | - NETARM_GEN_TCTL_ENABLE | - NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL)); - - /* set timer 2 counter */ - lastdec = TIMER_LOAD_VAL; -#elif defined(CONFIG_S3C4510B) - /* configure free running timer 0 */ - PUT_REG( REG_TMOD, 0x0); - /* Stop timer 0 */ - CLR_REG( REG_TMOD, TM0_RUN); - - /* Configure for interval mode */ - CLR_REG( REG_TMOD, TM1_TOGGLE); - - /* - * Load Timer data register with count down value. - * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ - */ - PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ)); - - /* - * Enable global interrupt - * Enable timer0 interrupt - */ - CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0))); - - /* Start timer */ - SET_REG( REG_TMOD, TM0_RUN); -#elif defined(CONFIG_LPC2292) - PUT32(T0IR, 0); /* disable all timer0 interrupts */ - PUT32(T0TCR, 0); /* disable timer0 */ - PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ); - PUT32(T0MCR, 0); - PUT32(T0TC, 0); - PUT32(T0TCR, 1); /* enable timer0 */ - -#elif defined(CONFIG_TEGRA) /* No timer routines for tegra as yet */ lastdec = 0; -#else -#error No timer_init() defined for this CPU type -#endif timestamp = 0; - return (0); -} - -#endif /* ! IntegratorAP */ - -/* - * timer without interrupts - */ - - -#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292) - -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -void __udelay (unsigned long usec) -{ - ulong tmo; - - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - - tmo += get_timer (0); - - while (get_timer_masked () < tmo) -#ifdef CONFIG_LPC2292 - /* GJ - not sure whether this is really needed or a misunderstanding */ - __asm__ __volatile__(" nop"); -#else - /*NOP*/; -#endif -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - lastdec = now; - - return timestamp; -} - -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - } else { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} - -#elif defined(CONFIG_S3C4510B) - -ulong get_timer (ulong base) -{ - return timestamp - base; -} - -void __udelay (unsigned long usec) -{ - u32 ticks; - - ticks = (usec * CONFIG_SYS_HZ) / 1000000; - - ticks += get_timer (0); - - while (get_timer (0) < ticks) - /*NOP*/; - + return 0; } - -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No timer routines for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_TEGRA) - /* No timer routines for tegra as yet */ -#else -#error Timer routines not defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/lpc2292/Makefile b/arch/arm/cpu/arm720t/lpc2292/Makefile deleted file mode 100644 index 1b93008685..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -COBJS = flash.o mmc.o mmc_hw.o spi.o -SOBJS = $(obj)iap_entry.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -# this MUST be compiled as thumb code! -$(SOBJS): - $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm720t/lpc2292/flash.c b/arch/arm/cpu/arm720t/lpc2292/flash.c deleted file mode 100644 index 3d2dc32231..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/flash.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> - * - * Modified to remove all but the IAP-command related code by - * Gary Jennejohn <garyj@denx.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -/* IAP commands use 32 bytes at the top of CPU internal sram, we - use 512 bytes below that */ -#define COPY_BUFFER_LOCATION 0x40003de0 - -#define IAP_LOCATION 0x7ffffff1 -#define IAP_CMD_PREPARE 50 -#define IAP_CMD_COPY 51 -#define IAP_CMD_ERASE 52 -#define IAP_CMD_CHECK 53 -#define IAP_CMD_ID 54 -#define IAP_CMD_VERSION 55 -#define IAP_CMD_COMPARE 56 - -#define IAP_RET_CMD_SUCCESS 0 - -static unsigned long command[5]; -static unsigned long result[2]; - -extern void iap_entry(unsigned long * command, unsigned long * result); - -/*----------------------------------------------------------------------- - * - */ -static int get_flash_sector(flash_info_t * info, ulong flash_addr) -{ - int i; - - for(i = 1; i < (info->sector_count); i++) { - if (flash_addr < (info->start[i])) - break; - } - - return (i-1); -} - -/*----------------------------------------------------------------------- - * This function assumes that flash_addr is aligned on 512 bytes boundary - * in flash. This function also assumes that prepare have been called - * for the sector in question. - */ -int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) -{ - int first_sector; - int last_sector; - - first_sector = get_flash_sector(info, flash_addr); - last_sector = get_flash_sector(info, flash_addr + 512 - 1); - - /* prepare sectors for write */ - command[0] = IAP_CMD_PREPARE; - command[1] = first_sector; - command[2] = last_sector; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROG_ERROR; - } - - command[0] = IAP_CMD_COPY; - command[1] = flash_addr; - command[2] = COPY_BUFFER_LOCATION; - command[3] = 512; - command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP copy failed\n"); - return 1; - } - - return 0; -} - -/*----------------------------------------------------------------------- - */ - -int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag; - int prot; - int sect; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - - flag = disable_interrupts(); - - printf ("Erasing %d sectors starting at sector %2d.\n" - "This make take some time ... ", - s_last - s_first + 1, s_first); - - command[0] = IAP_CMD_PREPARE; - command[1] = s_first; - command[2] = s_last; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROTECTED; - } - - command[0] = IAP_CMD_ERASE; - command[1] = s_first; - command[2] = s_last; - command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP erase failed\n"); - return ERR_PROTECTED; - } - - if (flag) - enable_interrupts(); - - return ERR_OK; -} - -int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, - ulong cnt) -{ - int first_copy_size; - int last_copy_size; - int first_block; - int last_block; - int nbr_mid_blocks; - uchar memmap_value; - ulong i; - uchar* src_org; - uchar* dst_org; - int ret = ERR_OK; - - src_org = src; - dst_org = (uchar*)addr; - - first_block = addr / 512; - last_block = (addr + cnt) / 512; - nbr_mid_blocks = last_block - first_block - 1; - - first_copy_size = 512 - (addr % 512); - last_copy_size = (addr + cnt) % 512; - - debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", - (ulong)(first_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - first_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)(first_block * 512)); - - /* copy first block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(first_block * 512), 512); - memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - src, first_copy_size); - lpc2292_copy_buffer_to_flash(info, first_block * 512); - src += first_copy_size; - addr += first_copy_size; - - /* copy middle blocks */ - for (i = 0; i < nbr_mid_blocks; i++) { - debug("copy middle block: %lX -> %lX 512 bytes, " - "%lX -> %lX 512 bytes\n", - (ulong)src, - (ulong)COPY_BUFFER_LOCATION, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); - - memcpy((void*)COPY_BUFFER_LOCATION, src, 512); - lpc2292_copy_buffer_to_flash(info, addr); - src += 512; - addr += 512; - } - - - if (last_copy_size > 0) { - debug("copy last block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", - (ulong)(last_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION), - last_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); - - /* copy last block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(last_block * 512), 512); - memcpy((void*)COPY_BUFFER_LOCATION, - src, last_copy_size); - lpc2292_copy_buffer_to_flash(info, addr); - } - - /* verify write */ - memmap_value = GET8(MEMMAP); - - disable_interrupts(); - - PUT8(MEMMAP, 01); /* we must make sure that initial 64 - bytes are taken from flash when we - do the compare */ - - for (i = 0; i < cnt; i++) { - if (*dst_org != *src_org){ - printf("Write failed. Byte %lX differs\n", i); - ret = ERR_PROG_ERROR; - break; - } - dst_org++; - src_org++; - } - - PUT8(MEMMAP, memmap_value); - enable_interrupts(); - - return ret; -} diff --git a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S b/arch/arm/cpu/arm720t/lpc2292/iap_entry.S deleted file mode 100644 index c31d5190bd..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S +++ /dev/null @@ -1,7 +0,0 @@ -IAP_ADDRESS: .word 0x7FFFFFF1 - -.globl iap_entry -iap_entry: - ldr r2, IAP_ADDRESS - bx r2 - mov pc, lr diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc.c b/arch/arm/cpu/arm720t/lpc2292/mmc.c deleted file mode 100644 index beaffe944c..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <mmc.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <part.h> -#include <fat.h> -#include "mmc_hw.h" -#include <asm/arch/spi.h> - -#ifdef CONFIG_MMC - -#undef MMC_DEBUG - -static block_dev_desc_t mmc_dev; - -/* these are filled out by a call to mmc_hw_get_parameters */ -static int hw_size; /* in kbytes */ -static int hw_nr_sects; -static int hw_sect_size; /* in bytes */ - -block_dev_desc_t * mmc_get_dev(int dev) -{ - return (block_dev_desc_t *)(&mmc_dev); -} - -unsigned long mmc_block_read(int dev, - unsigned long start, - lbaint_t blkcnt, - void *buffer) -{ - unsigned long rc = 0; - unsigned char *p = (unsigned char *)buffer; - unsigned long i; - unsigned long addr = start; - -#ifdef MMC_DEBUG - printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start, - (unsigned long)blkcnt); -#endif - - for(i = 0; i < (unsigned long)blkcnt; i++) { -#ifdef MMC_DEBUG - printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p); -#endif - (void)mmc_read_sector(addr, p); - rc++; - addr++; - p += hw_sect_size; - } - - return rc; -} - -/*----------------------------------------------------------------------------- - * Read hardware paramterers (sector size, size, number of sectors) - */ -static int mmc_hw_get_parameters(void) -{ - unsigned char csddata[16]; - unsigned int sizemult; - unsigned int size; - - mmc_read_csd(csddata); - hw_sect_size = 1<<(csddata[5] & 0x0f); - size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0); - sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1); - hw_nr_sects = (size+1)*(1<<(sizemult+2)); - hw_size = hw_nr_sects*hw_sect_size/1024; - -#ifdef MMC_DEBUG - printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, " - "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size); -#endif - - return 0; -} - -int mmc_legacy_init(int verbose) -{ - int ret = -ENODEV; - - if (verbose) - printf("mmc_legacy_init\n"); - - spi_init(); - /* this meeds to be done twice */ - mmc_hw_init(); - udelay(1000); - mmc_hw_init(); - - mmc_hw_get_parameters(); - - mmc_dev.if_type = IF_TYPE_MMC; - mmc_dev.part_type = PART_TYPE_DOS; - mmc_dev.dev = 0; - mmc_dev.lun = 0; - mmc_dev.type = 0; - mmc_dev.blksz = hw_sect_size; - mmc_dev.lba = hw_nr_sects; - sprintf((char*)mmc_dev.vendor, "Unknown vendor"); - sprintf((char*)mmc_dev.product, "Unknown product"); - sprintf((char*)mmc_dev.revision, "N/A"); - mmc_dev.removable = 0; /* should be true??? */ - mmc_dev.block_read = mmc_block_read; - - fat_register_device(&mmc_dev, 1); - - ret = 0; - - return ret; -} - -#endif /* CONFIG_MMC */ diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c deleted file mode 100644 index bd6a5b1206..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - This code was original written by Ulrich Radig and modified by - Embedded Artists AB (www.embeddedartists.com). - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <config.h> -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/spi.h> - -#define MMC_Enable() PUT32(IO1CLR, 1l << 22) -#define MMC_Disable() PUT32(IO1SET, 1l << 22) -#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0); - -static unsigned char Write_Command_MMC (unsigned char *CMD); -static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, - unsigned short int Bytes); - -/* initialize the hardware */ -int mmc_hw_init(void) -{ - unsigned long a; - unsigned short int Timeout = 0; - unsigned char b; - unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95}; - - /* set-up GPIO and SPI */ - (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */ - (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */ - - MMC_Disable(); - - spi_lock(); - spi_set_clock(248); - spi_set_cfg(0, 1, 0); - MMC_Enable(); - - /* waste some time */ - for(a=0; a < 20000; a++) - asm("nop"); - - /* Put the MMC/SD-card into SPI-mode */ - for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */ - spi_write(0xff); - - /* Sends command CMD0 to MMC/SD-card */ - while (Write_Command_MMC(CMD) != 1) { - if (Timeout++ > 200) { - MMC_Disable(); - spi_unlock(); - return(1); /* Abort with command 1 (return 1) */ - } - } - /* Sends Command CMD1 an MMC/SD-card */ - Timeout = 0; - CMD[0] = 0x41;/* Command 1 */ - CMD[5] = 0xFF; - - while (Write_Command_MMC(CMD) != 0) { - if (Timeout++ > 200) { - MMC_Disable(); - spi_unlock(); - return (2); /* Abort with command 2 (return 2) */ - } - } - - MMC_Disable(); - spi_unlock(); - - return 0; -} - -/* ############################################################################ - Sends a command to the MMC/SD-card - ######################################################################### */ -static unsigned char Write_Command_MMC (unsigned char *CMD) -{ - unsigned char a, tmp = 0xff; - unsigned short int Timeout = 0; - - MMC_Disable(); - spi_write(0xFF); - MMC_Enable(); - - for (a = 0; a < 0x06; a++) - spi_write(*CMD++); - - while (tmp == 0xff) { - tmp = spi_read(); - if (Timeout++ > 5000) - break; - } - - return (tmp); -} - -/* ############################################################################ - Routine to read the CID register from the MMC/SD-card (16 bytes) - ######################################################################### */ -void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short - int Bytes) -{ - unsigned short int a; - - spi_lock(); - mmc_spi_cfg(); - MMC_Enable(); - - if (Write_Command_MMC(CMD) != 0) { - MMC_Disable(); - spi_unlock(); - return; - } - - while (spi_read() != 0xfe) {}; - for (a = 0; a < Bytes; a++) - *Buffer++ = spi_read(); - - /* Read the CRC-byte */ - spi_read(); /* CRC - byte is discarded */ - spi_read(); /* CRC - byte is discarded */ - /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */ - MMC_Disable(); - spi_unlock(); - - return; -} - -/* ############################################################################ - Routine to read a block (512 bytes) from the MMC/SD-card - ######################################################################### */ -unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer) -{ - /* Command 16 to read aBlocks from the MMC/SD - caed */ - unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; - - /* The address on the MMC/SD-card is in bytes, - addr is transformed from blocks to bytes and the result is - placed into the command */ - - addr = addr << 9; /* addr = addr * 512 */ - - CMD[1] = ((addr & 0xFF000000) >> 24); - CMD[2] = ((addr & 0x00FF0000) >> 16); - CMD[3] = ((addr & 0x0000FF00) >> 8 ); - - MMC_Read_Block(CMD, Buffer, 512); - - return (0); -} - -/* ############################################################################ - Routine to write a block (512 byte) to the MMC/SD-card - ######################################################################### */ -unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer) -{ - unsigned char tmp, a; - unsigned short int b; - /* Command 24 to write a block to the MMC/SD - card */ - unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF}; - - /* The address on the MMC/SD-card is in bytes, - addr is transformed from blocks to bytes and the result is - placed into the command */ - - addr = addr << 9; /* addr = addr * 512 */ - - CMD[1] = ((addr & 0xFF000000) >> 24); - CMD[2] = ((addr & 0x00FF0000) >> 16); - CMD[3] = ((addr & 0x0000FF00) >> 8 ); - - spi_lock(); - mmc_spi_cfg(); - MMC_Enable(); - - /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */ - tmp = Write_Command_MMC(CMD); - if (tmp != 0) { - MMC_Disable(); - spi_unlock(); - return(tmp); - } - - /* Do a short delay and send a clock-pulse to the MMC/SD-card */ - for (a = 0; a < 100; a++) - spi_read(); - - /* Send a start byte to the MMC/SD-card */ - spi_write(0xFE); - - /* Write the block (512 bytes) to the MMC/SD-card */ - for (b = 0; b < 512; b++) - spi_write(*Buffer++); - - /* write the CRC-Byte */ - spi_write(0xFF); /* write a dummy CRC */ - spi_write(0xFF); /* CRC code is not used */ - - /* Wait for MMC/SD-card busy */ - while (spi_read() != 0xff) {}; - - /* set MMC_Chip_Select to high (MMC/SD-card inactive) */ - MMC_Disable(); - spi_unlock(); - return (0); -} - -/* ######################################################################### - Routine to read the CSD register from the MMC/SD-card (16 bytes) - ######################################################################### */ -unsigned char mmc_read_csd (unsigned char *Buffer) -{ - /* Command to read the CSD register */ - unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF}; - - MMC_Read_Block(CMD, Buffer, 16); - - return (0); -} diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h deleted file mode 100644 index 3687dbf696..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - This module implements a linux character device driver for the 24c256 chip. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef _MMC_HW_ -#define _MMC_HW_ - -unsigned char mmc_read_csd(unsigned char *Buffer); -unsigned char mmc_read_sector (unsigned long addr, - unsigned char *Buffer); -unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer); -int mmc_hw_init(void); - -#endif /* _MMC_HW_ */ diff --git a/arch/arm/cpu/arm720t/lpc2292/spi.c b/arch/arm/cpu/arm720t/lpc2292/spi.c deleted file mode 100644 index d296bdac68..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/spi.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - This module implements an interface to the SPI on the lpc22xx. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <config.h> -#include <common.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <asm/arch/spi.h> - -unsigned long spi_flags; -unsigned char spi_idle = 0x00; - -int spi_init(void) -{ - unsigned long pinsel0_value; - - /* activate spi pins */ - pinsel0_value = GET32(PINSEL0); - pinsel0_value &= ~(0xFFl << 8); - pinsel0_value |= (0x55l << 8); - PUT32(PINSEL0, pinsel0_value); - - return 0; -} diff --git a/arch/arm/cpu/arm720t/s3c4510b/Makefile b/arch/arm/cpu/arm720t/s3c4510b/Makefile deleted file mode 100644 index 5c6df08b1a..0000000000 --- a/arch/arm/cpu/arm720t/s3c4510b/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -COBJS-y += cache.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm720t/s3c4510b/cache.c b/arch/arm/cpu/arm720t/s3c4510b/cache.c deleted file mode 100644 index 104d287b26..0000000000 --- a/arch/arm/cpu/arm720t/s3c4510b/cache.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/hardware.h> - -void icache_enable (void) -{ - s32 i; - - /* disable all cache bits */ - CLR_REG( REG_SYSCFG, 0x3F); - - /* 8KB cache, write enable */ - SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01); - - /* clear TAG RAM bits */ - for ( i = 0; i < 256; i++) - PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000); - - /* clear SET0 RAM */ - for(i=0; i < 1024; i++) - PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000); - - /* clear SET1 RAM */ - for(i=0; i < 1024; i++) - PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000); - - /* enable cache */ - SET_REG( REG_SYSCFG, CACHE_ENABLE); - -} - -void icache_disable (void) -{ - /* disable all cache bits */ - CLR_REG( REG_SYSCFG, 0x3F); -} - -int icache_status (void) -{ - return GET_REG( REG_SYSCFG) & CACHE_ENABLE; -} - -void dcache_enable (void) -{ - /* we don't have seperate instruction/data caches */ - icache_enable(); -} - -void dcache_disable (void) -{ - /* we don't have seperate instruction/data caches */ - icache_disable(); -} - -int dcache_status (void) -{ - /* we don't have seperate instruction/data caches */ - return icache_status(); -} diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 2f914e9b4e..c2a7763fff 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -43,11 +43,7 @@ _start: b reset ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort -#ifdef CONFIG_LPC2292 - .word 0xB4405F76 /* 2's complement of the checksum of the vectors */ -#else ldr pc, _not_used -#endif ldr pc, _irq ldr pc, _fiq @@ -151,10 +147,6 @@ reset: bl cpu_init_crit #endif -#ifdef CONFIG_LPC2292 - bl lowlevel_init -#endif - /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) @@ -291,148 +283,9 @@ _dynsym_start_ofs: ************************************************************************* */ -#if defined(CONFIG_LPC2292) -PLLCFG_ADR: .word PLLCFG -PLLFEED_ADR: .word PLLFEED -PLLCON_ADR: .word PLLCON -PLLSTAT_ADR: .word PLLSTAT -VPBDIV_ADR: .word VPBDIV -MEMMAP_ADR: .word MEMMAP - -#endif - cpu_init_crit: -#if defined(CONFIG_NETARM) - /* - * prior to software reset : need to set pin PORTC4 to be *HRESET - */ - ldr r0, =NETARM_GEN_MODULE_BASE - ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \ - NETARM_GEN_PORT_DIR(0x10)) - str r1, [r0, #+NETARM_GEN_PORTC] - /* - * software reset : see HW Ref. Guide 8.2.4 : Software Service register - * for an explanation of this process - */ - ldr r0, =NETARM_GEN_MODULE_BASE - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - /* - * setup PLL and System Config - */ - ldr r0, =NETARM_GEN_MODULE_BASE - - ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \ - NETARM_GEN_SYS_CFG_BUSFULL | \ - NETARM_GEN_SYS_CFG_USER_EN | \ - NETARM_GEN_SYS_CFG_ALIGN_ABORT | \ - NETARM_GEN_SYS_CFG_BUSARB_INT | \ - NETARM_GEN_SYS_CFG_BUSMON_EN ) - - str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL] - -#ifndef CONFIG_NETARM_PLL_BYPASS - ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \ - NETARM_GEN_PLL_CTL_POLTST_DEF | \ - NETARM_GEN_PLL_CTL_INDIV(1) | \ - NETARM_GEN_PLL_CTL_ICP_DEF | \ - NETARM_GEN_PLL_CTL_OUTDIV(2) ) - str r1, [r0, #+NETARM_GEN_PLL_CONTROL] -#endif - - /* - * mask all IRQs by clearing all bits in the INTMRs - */ - mov r1, #0 - ldr r0, =NETARM_GEN_MODULE_BASE - str r1, [r0, #+NETARM_GEN_INTR_ENABLE] - -#elif defined(CONFIG_S3C4510B) - /* - * Mask off all IRQ sources - */ - ldr r1, =REG_INTMASK - ldr r0, =0x3FFFFF - str r0, [r1] - - /* - * Disable Cache - */ - ldr r0, =REG_SYSCFG - ldr r1, =0x83ffffa0 /* cache-disabled */ - str r1, [r0] - -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No specific initialisation for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - /* Set-up PLL */ - mov r3, #0xAA - mov r4, #0x55 - /* First disconnect and disable the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x00 - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Set new M and P values */ - ldr r0, PLLCFG_ADR - mov r1, #0x23 /* M=4 and P=2 */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Then enable the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x01 /* PLL enable bit */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Wait for the lock */ - ldr r0, PLLSTAT_ADR - mov r1, #0x400 /* lock bit */ -lock_loop: - ldr r2, [r0] - and r2, r1, r2 - cmp r2, #0 - beq lock_loop - /* And finally connect the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x03 /* PLL enable bit and connect bit */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Set-up VPBDIV register */ - ldr r0, VPBDIV_ADR - mov r1, #0x01 /* VPB clock is same as process clock */ - str r1, [r0] -#elif defined(CONFIG_TEGRA) - /* No cpu_init_crit for tegra as yet */ -#else -#error No cpu_init_crit() defined for current CPU type -#endif - -#ifdef CONFIG_ARM7_REVD - /* set clock speed */ - /* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */ - /* !!! not doing DRAM refresh properly! */ - ldr r0, SYSCON3 - ldr r1, [r0] - bic r1, r1, #CLKCTL - orr r1, r1, #CLKCTL_36 - str r1, [r0] -#endif - -#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA) +#if !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -610,39 +463,3 @@ fiq: #endif #endif /* CONFIG_SPL_BUILD */ - -#if defined(CONFIG_NETARM) - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, =NETARM_MEM_MODULE_BASE - ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR] - ldr r1, =0xFFFFF000 - and r0, r1, r0 - ldr r1, =(relocate-CONFIG_SYS_TEXT_BASE) - add r0, r1, r0 - ldr r4, =NETARM_GEN_MODULE_BASE - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - mov pc, r0 -#elif defined(CONFIG_S3C4510B) -/* Nothing done here as reseting the CPU is board specific, depending - * on external peripherals such as watchdog timers, etc. */ -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No specific reset actions for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - .align 5 -.globl reset_cpu -reset_cpu: - mov pc, r0 -#elif defined(CONFIG_TEGRA) - /* No specific reset actions for tegra as yet */ -#else -#error No reset_cpu() defined for current CPU type -#endif diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S index e9f1227dd6..1bba571077 100644 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S @@ -72,10 +72,10 @@ lowlevel_init: * enable UART for early debug trace */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR) - mov r2, #0xd9 - str r2, [r1] /* 115200 baud */ + mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE) + str r2, [r1] ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL) - mov r2, #0x03 + mov r2, #KS8695_UART_LINEC_WLEN8 str r2, [r1] /* 8 data bits, no parity, 1 stop */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) mov r2, #0x41 diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 6d77219d0d..93485523b5 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -118,6 +118,21 @@ void at91_serial2_hw_init(void) writel(1 << ATMEL_ID_USART2, &pmc->pcer); } +void at91_mci_hw_init(void) +{ + /* Initialize the MCI0 */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ + + /* Enable clock for MCI0 */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 7768912603..74875b3255 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -21,6 +21,7 @@ COBJS += sys_info.o COBJS += ddr.o COBJS += emif4.o COBJS += board.o +COBJS += mux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 978b184fb2..e4c123cd21 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; -struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; -struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; - static const struct gpio_bank gpio_bank_am33xx[4] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -48,153 +45,11 @@ static const struct gpio_bank gpio_bank_am33xx[4] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; -/* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA - -/* GPIO that controls power to DDR on EVM-SK */ -#define GPIO_DDR_VTT_EN 7 - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -static struct am335x_baseboard_id __attribute__((section (".data"))) header; - -static inline int board_is_bone(void) -{ - return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); -} - -static inline int board_is_evm_sk(void) -{ - return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); -} - -/* - * Read header information from EEPROM into global structure. - */ -static int read_eeprom(void) -{ - /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { - puts("Could not probe the EEPROM; something fundamentally " - "wrong on the I2C bus.\n"); - return -ENODEV; - } - - /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, - sizeof(header))) { - puts("Could not read the EEPROM; something fundamentally" - " wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - /* - * read the eeprom using i2c again, - * but use only a 1 byte address - */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, - (uchar *)&header, sizeof(header))) { - puts("Could not read the EEPROM; something " - "fundamentally wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - printf("Incorrect magic number (0x%x) in EEPROM\n", - header.magic); - return -EINVAL; - } - } - - return 0; -} - -/* UART Defines */ -#ifdef CONFIG_SPL_BUILD -#define UART_RESET (0x1 << 1) -#define UART_CLK_RUNNING_MASK 0x1 -#define UART_SMART_IDLE_EN (0x1 << 0x3) -#endif - -/* - * Determine what type of DDR we have. - */ -static short inline board_memory_type(void) -{ - /* The following boards are known to use DDR3. */ - if (board_is_evm_sk()) - return EMIF_REG_SDRAM_TYPE_DDR3; - - return EMIF_REG_SDRAM_TYPE_DDR2; -} - -/* - * early system init of muxing and clocks. - */ -void s_init(void) -{ - /* WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - -#ifdef CONFIG_SPL_BUILD - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); - - /* UART softreset */ - u32 regVal; - - enable_uart0_pin_mux(); - - regVal = readl(&uart_base->uartsyscfg); - regVal |= UART_RESET; - writel(regVal, &uart_base->uartsyscfg); - while ((readl(&uart_base->uartsyssts) & - UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) - ; - - /* Disable smart idle */ - regVal = readl(&uart_base->uartsyscfg); - regVal |= UART_SMART_IDLE_EN; - writel(regVal, &uart_base->uartsyscfg); - - gd = &gdata; - - preloader_console_init(); - - /* Initalize the board header */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); - - enable_board_pin_mux(&header); - if (board_is_evm_sk()) { - /* - * EVM SK 1.2A and later use gpio0_7 to enable DDR3. - * This is safe enough to do on older revs. - */ - gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); - gpio_direction_output(GPIO_DDR_VTT_EN, 1); - } - - config_ddr(board_memory_type()); -#endif -} - #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) +int cpu_mmc_init(bd_t *bis) { int ret; - + ret = omap_mmc_init(0, 0, 0); if (ret) return ret; @@ -208,93 +63,3 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); - - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_id = 0, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_id = 1, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = AM335X_CPSW_MDIO_BASE, - .cpsw_base = AM335X_CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - debug("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ether_addr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); - else - return -1; - } - - if (board_is_bone()) { - writel(MII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_MII; - } else { - writel(RGMII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_RGMII; - } - - return cpsw_register(&cpsw_data); -} -#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 2b19506a34..f870859414 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -44,6 +44,7 @@ const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; +const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; static void enable_interface_clocks(void) { @@ -153,6 +154,11 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmper->spi0clkctrl); while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) ; + + /* RTC */ + writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); + while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk index 5750bbdcb6..babf0eb5cc 100644 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -13,6 +13,7 @@ # ifdef CONFIG_SPL_BUILD ALL-y += $(OBJTREE)/MLO +ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap else ALL-y += $(obj)u-boot.img endif diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index b2d7c0d956..01e3a5204e 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -47,78 +47,6 @@ void dram_init_banksize(void) static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; -static const struct ddr_data ddr2_data = { - .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) - |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), - .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) - |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), - .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) - |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), - .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) - |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), - .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) - |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) - |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), - .datauserank0delay = DDR2_PHY_RANK0_DELAY, - .datadldiff0 = PHY_DLL_LOCK_DIFF, -}; - -static const struct cmd_control ddr2_cmd_ctrl_data = { - .cmd0csratio = DDR2_RATIO, - .cmd0dldiff = DDR2_DLL_LOCK_DIFF, - .cmd0iclkout = DDR2_INVERT_CLKOUT, - - .cmd1csratio = DDR2_RATIO, - .cmd1dldiff = DDR2_DLL_LOCK_DIFF, - .cmd1iclkout = DDR2_INVERT_CLKOUT, - - .cmd2csratio = DDR2_RATIO, - .cmd2dldiff = DDR2_DLL_LOCK_DIFF, - .cmd2iclkout = DDR2_INVERT_CLKOUT, -}; - -static const struct emif_regs ddr2_emif_reg_data = { - .sdram_config = DDR2_EMIF_SDCFG, - .ref_ctrl = DDR2_EMIF_SDREF, - .sdram_tim1 = DDR2_EMIF_TIM1, - .sdram_tim2 = DDR2_EMIF_TIM2, - .sdram_tim3 = DDR2_EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = DDR3_RD_DQS, - .datawdsratio0 = DDR3_WR_DQS, - .datafwsratio0 = DDR3_PHY_FIFO_WE, - .datawrsratio0 = DDR3_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = DDR3_RATIO, - .cmd0dldiff = DDR3_DLL_LOCK_DIFF, - .cmd0iclkout = DDR3_INVERT_CLKOUT, - - .cmd1csratio = DDR3_RATIO, - .cmd1dldiff = DDR3_DLL_LOCK_DIFF, - .cmd1iclkout = DDR3_INVERT_CLKOUT, - - .cmd2csratio = DDR3_RATIO, - .cmd2dldiff = DDR3_DLL_LOCK_DIFF, - .cmd2iclkout = DDR3_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = DDR3_EMIF_SDCFG, - .ref_ctrl = DDR3_EMIF_SDREF, - .sdram_tim1 = DDR3_EMIF_TIM1, - .sdram_tim2 = DDR3_EMIF_TIM2, - .sdram_tim3 = DDR3_EMIF_TIM3, - .zq_config = DDR3_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, -}; - static void config_vtp(void) { writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE, @@ -134,46 +62,26 @@ static void config_vtp(void) ; } -void config_ddr(short ddr_type) +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs) { - int ddr_pll, ioctrl_val; - const struct emif_regs *emif_regs; - const struct ddr_data *ddr_data; - const struct cmd_control *cmd_ctrl_data; - - if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) { - ddr_pll = 266; - cmd_ctrl_data = &ddr2_cmd_ctrl_data; - ddr_data = &ddr2_data; - ioctrl_val = DDR2_IOCTRL_VALUE; - emif_regs = &ddr2_emif_reg_data; - } else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) { - ddr_pll = 303; - cmd_ctrl_data = &ddr3_cmd_ctrl_data; - ddr_data = &ddr3_data; - ioctrl_val = DDR3_IOCTRL_VALUE; - emif_regs = &ddr3_emif_reg_data; - } else { - puts("Unknown memory type"); - hang(); - } - enable_emif_clocks(); - ddr_pll_config(ddr_pll); + ddr_pll_config(pll); config_vtp(); - config_cmd_ctrl(cmd_ctrl_data); + config_cmd_ctrl(ctrl); - config_ddr_data(0, ddr_data); - config_ddr_data(1, ddr_data); + config_ddr_data(0, data); + config_ddr_data(1, data); - config_io_ctrl(ioctrl_val); + config_io_ctrl(ioctrl); /* Set CKE to be controlled by EMIF/DDR PHY */ writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); /* Program EMIF instance */ - config_ddr_phy(emif_regs); - set_sdram_timings(emif_regs); - config_sdram(emif_regs); + config_ddr_phy(regs); + set_sdram_timings(regs); + config_sdram(regs); } #endif diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/cpu/armv7/am33xx/mux.c new file mode 100644 index 0000000000..2ded47228d --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mux.c @@ -0,0 +1,33 @@ +/* + * mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/mux.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) +{ + int i; + + if (!mod_pin_mux) + return; + + for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) + MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); +} diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 227aaff1e6..1996b97536 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -34,8 +34,8 @@ SECTIONS .text : { __image_copy_start = .; - CPUDIR/start.o (.text) - *(.text) + CPUDIR/start.o (.text*) + *(.text*) } . = ALIGN(4); @@ -43,7 +43,7 @@ SECTIONS . = ALIGN(4); .data : { - *(.data) + *(.data*) } . = ALIGN(4); @@ -83,7 +83,7 @@ SECTIONS .bss __rel_dyn_start (OVERLAY) : { __bss_start = .; - *(.bss) + *(.bss*) . = ALIGN(4); __bss_end__ = .; } diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 6cfbef76a7..819fd2f026 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -169,6 +169,12 @@ struct cm_dpll { unsigned int clktimer2clk; /* offset 0x08 */ }; +/* Control Module RTC registers */ +struct cm_rtc { + unsigned int rtcclkctrl; /* offset 0x0 */ + unsigned int clkstctrl; /* offset 0x4 */ +}; + /* Watchdog timer registers */ struct wd_timer { unsigned int resv1[4]; @@ -218,6 +224,15 @@ struct gptimer { unsigned int tcar2; /* offset 0x58 */ }; +/* RTC Registers */ +struct rtc_regs { + unsigned int res[21]; + unsigned int osc; /* offset 0x54 */ + unsigned int res2[5]; + unsigned int kick0r; /* offset 0x6c */ + unsigned int kick1r; /* offset 0x70 */ +}; + /* UART Registers */ struct uart_sys { unsigned int resv1[21]; diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 6b22c45f77..8e69fb67b1 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -29,40 +29,41 @@ #define PHY_DLL_LOCK_DIFF 0x0 #define DDR_CKE_CTRL_NORMAL 0x1 -#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ -#define DDR2_EMIF_TIM1 0x0666B3C9 -#define DDR2_EMIF_TIM2 0x243631CA -#define DDR2_EMIF_TIM3 0x0000033F -#define DDR2_EMIF_SDCFG 0x41805332 -#define DDR2_EMIF_SDREF 0x0000081a -#define DDR2_DLL_LOCK_DIFF 0x0 -#define DDR2_RATIO 0x80 -#define DDR2_INVERT_CLKOUT 0x00 -#define DDR2_RD_DQS 0x12 -#define DDR2_WR_DQS 0x00 -#define DDR2_PHY_WRLVL 0x00 -#define DDR2_PHY_GATELVL 0x00 -#define DDR2_PHY_WR_DATA 0x40 -#define DDR2_PHY_FIFO_WE 0x80 -#define DDR2_PHY_RANK0_DELAY 0x1 -#define DDR2_IOCTRL_VALUE 0x18B +/* Micron MT47H128M16RT-25E */ +#define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005 +#define MT47H128M16RT25E_EMIF_TIM1 0x0666B3C9 +#define MT47H128M16RT25E_EMIF_TIM2 0x243631CA +#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F +#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332 +#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a +#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0 +#define MT47H128M16RT25E_RATIO 0x80 +#define MT47H128M16RT25E_INVERT_CLKOUT 0x00 +#define MT47H128M16RT25E_RD_DQS 0x12 +#define MT47H128M16RT25E_WR_DQS 0x00 +#define MT47H128M16RT25E_PHY_WRLVL 0x00 +#define MT47H128M16RT25E_PHY_GATELVL 0x00 +#define MT47H128M16RT25E_PHY_WR_DATA 0x40 +#define MT47H128M16RT25E_PHY_FIFO_WE 0x80 +#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1 +#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B /* Micron MT41J128M16JT-125 */ -#define DDR3_EMIF_READ_LATENCY 0x06 -#define DDR3_EMIF_TIM1 0x0888A39B -#define DDR3_EMIF_TIM2 0x26337FDA -#define DDR3_EMIF_TIM3 0x501F830F -#define DDR3_EMIF_SDCFG 0x61C04AB2 -#define DDR3_EMIF_SDREF 0x0000093B -#define DDR3_ZQ_CFG 0x50074BE4 -#define DDR3_DLL_LOCK_DIFF 0x1 -#define DDR3_RATIO 0x40 -#define DDR3_INVERT_CLKOUT 0x1 -#define DDR3_RD_DQS 0x3B -#define DDR3_WR_DQS 0x85 -#define DDR3_PHY_WR_DATA 0xC1 -#define DDR3_PHY_FIFO_WE 0x100 -#define DDR3_IOCTRL_VALUE 0x18B +#define MT41J128MJT125_EMIF_READ_LATENCY 0x06 +#define MT41J128MJT125_EMIF_TIM1 0x0888A39B +#define MT41J128MJT125_EMIF_TIM2 0x26337FDA +#define MT41J128MJT125_EMIF_TIM3 0x501F830F +#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2 +#define MT41J128MJT125_EMIF_SDREF 0x0000093B +#define MT41J128MJT125_ZQ_CFG 0x50074BE4 +#define MT41J128MJT125_DLL_LOCK_DIFF 0x1 +#define MT41J128MJT125_RATIO 0x40 +#define MT41J128MJT125_INVERT_CLKOUT 0x1 +#define MT41J128MJT125_RD_DQS 0x3B +#define MT41J128MJT125_WR_DQS 0x85 +#define MT41J128MJT125_PHY_WR_DATA 0xC1 +#define MT41J128MJT125_PHY_FIFO_WE 0x100 +#define MT41J128MJT125_IOCTRL_VALUE 0x18B /** * Configure SDRAM @@ -189,6 +190,8 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -void config_ddr(short ddr_type); +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 62332f2ded..5bd4bc8722 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -61,6 +61,7 @@ #define CM_WKUP 0x44E00400 #define CM_DPLL 0x44E00500 #define CM_DEVICE 0x44E00700 +#define CM_RTC 0x44E00800 #define CM_CEFUSE 0x44E00A00 #define PRM_DEVICE 0x44E00F00 @@ -83,4 +84,7 @@ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 +/* RTC base address */ +#define AM335X_RTC_BASE 0x44E3E000 + #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h new file mode 100644 index 0000000000..aed6b00cc6 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -0,0 +1,261 @@ +/* + * mux.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_H_ +#define _MUX_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +/* PAD Control Fields */ +#define SLEWCTRL (0x1 << 6) +#define RXACTIVE (0x1 << 5) +#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ +#define MODE(val) val /* used for Readability */ + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int gpmc_ad0; + int gpmc_ad1; + int gpmc_ad2; + int gpmc_ad3; + int gpmc_ad4; + int gpmc_ad5; + int gpmc_ad6; + int gpmc_ad7; + int gpmc_ad8; + int gpmc_ad9; + int gpmc_ad10; + int gpmc_ad11; + int gpmc_ad12; + int gpmc_ad13; + int gpmc_ad14; + int gpmc_ad15; + int gpmc_a0; + int gpmc_a1; + int gpmc_a2; + int gpmc_a3; + int gpmc_a4; + int gpmc_a5; + int gpmc_a6; + int gpmc_a7; + int gpmc_a8; + int gpmc_a9; + int gpmc_a10; + int gpmc_a11; + int gpmc_wait0; + int gpmc_wpn; + int gpmc_be1n; + int gpmc_csn0; + int gpmc_csn1; + int gpmc_csn2; + int gpmc_csn3; + int gpmc_clk; + int gpmc_advn_ale; + int gpmc_oen_ren; + int gpmc_wen; + int gpmc_be0n_cle; + int lcd_data0; + int lcd_data1; + int lcd_data2; + int lcd_data3; + int lcd_data4; + int lcd_data5; + int lcd_data6; + int lcd_data7; + int lcd_data8; + int lcd_data9; + int lcd_data10; + int lcd_data11; + int lcd_data12; + int lcd_data13; + int lcd_data14; + int lcd_data15; + int lcd_vsync; + int lcd_hsync; + int lcd_pclk; + int lcd_ac_bias_en; + int mmc0_dat3; + int mmc0_dat2; + int mmc0_dat1; + int mmc0_dat0; + int mmc0_clk; + int mmc0_cmd; + int mii1_col; + int mii1_crs; + int mii1_rxerr; + int mii1_txen; + int mii1_rxdv; + int mii1_txd3; + int mii1_txd2; + int mii1_txd1; + int mii1_txd0; + int mii1_txclk; + int mii1_rxclk; + int mii1_rxd3; + int mii1_rxd2; + int mii1_rxd1; + int mii1_rxd0; + int rmii1_refclk; + int mdio_data; + int mdio_clk; + int spi0_sclk; + int spi0_d0; + int spi0_d1; + int spi0_cs0; + int spi0_cs1; + int ecap0_in_pwm0_out; + int uart0_ctsn; + int uart0_rtsn; + int uart0_rxd; + int uart0_txd; + int uart1_ctsn; + int uart1_rtsn; + int uart1_rxd; + int uart1_txd; + int i2c0_sda; + int i2c0_scl; + int mcasp0_aclkx; + int mcasp0_fsx; + int mcasp0_axr0; + int mcasp0_ahclkr; + int mcasp0_aclkr; + int mcasp0_fsr; + int mcasp0_axr1; + int mcasp0_ahclkx; + int xdma_event_intr0; + int xdma_event_intr1; + int nresetin_out; + int porz; + int nnmi; + int osc0_in; + int osc0_out; + int rsvd1; + int tms; + int tdi; + int tdo; + int tck; + int ntrst; + int emu0; + int emu1; + int osc1_in; + int osc1_out; + int pmic_power_en; + int rtc_porz; + int rsvd2; + int ext_wakeup; + int enz_kaldo_1p8v; + int usb0_dm; + int usb0_dp; + int usb0_ce; + int usb0_id; + int usb0_vbus; + int usb0_drvvbus; + int usb1_dm; + int usb1_dp; + int usb1_ce; + int usb1_id; + int usb1_vbus; + int usb1_drvvbus; + int ddr_resetn; + int ddr_csn0; + int ddr_cke; + int ddr_ck; + int ddr_nck; + int ddr_casn; + int ddr_rasn; + int ddr_wen; + int ddr_ba0; + int ddr_ba1; + int ddr_ba2; + int ddr_a0; + int ddr_a1; + int ddr_a2; + int ddr_a3; + int ddr_a4; + int ddr_a5; + int ddr_a6; + int ddr_a7; + int ddr_a8; + int ddr_a9; + int ddr_a10; + int ddr_a11; + int ddr_a12; + int ddr_a13; + int ddr_a14; + int ddr_a15; + int ddr_odt; + int ddr_d0; + int ddr_d1; + int ddr_d2; + int ddr_d3; + int ddr_d4; + int ddr_d5; + int ddr_d6; + int ddr_d7; + int ddr_d8; + int ddr_d9; + int ddr_d10; + int ddr_d11; + int ddr_d12; + int ddr_d13; + int ddr_d14; + int ddr_d15; + int ddr_dqm0; + int ddr_dqm1; + int ddr_dqs0; + int ddr_dqsn0; + int ddr_dqs1; + int ddr_dqsn1; + int ddr_vref; + int ddr_vtp; + int ddr_strben0; + int ddr_strben1; + int ain7; + int ain6; + int ain5; + int ain4; + int ain3; + int ain2; + int ain1; + int ain0; + int vrefp; + int vrefn; +}; + +struct module_pin_mux { + short reg_offset; + unsigned char val; +}; + +/* Pad control register offset */ +#define PAD_CTRL_BASE 0x800 +#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ + (PAD_CTRL_BASE))->x) + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux); + +#endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 63ed10b257..644ff353fe 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -27,6 +27,7 @@ #define BOOT_DEVICE_NAND 5 #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ +#define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 819ea650f0..9cf35e0257 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,24 +19,6 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -/* - * AM335x parts define a system EEPROM that defines certain sub-fields. - * We use these fields to in turn see what board we are on, and what - * that might require us to set or not set. - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[HDR_NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; - #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -51,13 +33,4 @@ u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/arch/arm/include/asm/arch-arm720t/hardware.h b/arch/arm/include/asm/arch-arm720t/hardware.h index 0a357b1e0a..0a766108a6 100644 --- a/arch/arm/include/asm/arch-arm720t/hardware.h +++ b/arch/arm/include/asm/arch-arm720t/hardware.h @@ -24,9 +24,7 @@ * MA 02111-1307 USA */ -#if defined(CONFIG_NETARM) -#include <asm/arch-arm720t/netarm_registers.h> -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) +#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ #else #error No hardware file defined for this configuration diff --git a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h b/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h deleted file mode 100644 index 328eaf0da9..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h +++ /dev/null @@ -1,182 +0,0 @@ -/* * include/asm-armnommu/arch-netarm/netarm_dma_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * David Smith - */ - -#ifndef __NETARM_DMA_MODULE_REGISTERS_H -#define __NETARM_DMA_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_DMA_MODULE_BASE (0xFF900000) - -#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c))) - -#define NETARM_DMA1A_BFR_DESCRPTOR_PTR (0x00) -#define NETARM_DMA1A_CONTROL (0x10) -#define NETARM_DMA1A_STATUS (0x14) -#define NETARM_DMA1B_BFR_DESCRPTOR_PTR (0x20) -#define NETARM_DMA1B_CONTROL (0x30) -#define NETARM_DMA1B_STATUS (0x34) -#define NETARM_DMA1C_BFR_DESCRPTOR_PTR (0x40) -#define NETARM_DMA1C_CONTROL (0x50) -#define NETARM_DMA1C_STATUS (0x54) -#define NETARM_DMA1D_BFR_DESCRPTOR_PTR (0x60) -#define NETARM_DMA1D_CONTROL (0x70) -#define NETARM_DMA1D_STATUS (0x74) - -#define NETARM_DMA2_BFR_DESCRPTOR_PTR (0x80) -#define NETARM_DMA2_CONTROL (0x90) -#define NETARM_DMA2_STATUS (0x94) - -#define NETARM_DMA3_BFR_DESCRPTOR_PTR (0xA0) -#define NETARM_DMA3_CONTROL (0xB0) -#define NETARM_DMA3_STATUS (0xB4) - -#define NETARM_DMA4_BFR_DESCRPTOR_PTR (0xC0) -#define NETARM_DMA4_CONTROL (0xD0) -#define NETARM_DMA4_STATUS (0xD4) - -#define NETARM_DMA5_BFR_DESCRPTOR_PTR (0xE0) -#define NETARM_DMA5_CONTROL (0xF0) -#define NETARM_DMA5_STATUS (0xF4) - -#define NETARM_DMA6_BFR_DESCRPTOR_PTR (0x100) -#define NETARM_DMA6_CONTROL (0x110) -#define NETARM_DMA6_STATUS (0x114) - -#define NETARM_DMA7_BFR_DESCRPTOR_PTR (0x120) -#define NETARM_DMA7_CONTROL (0x130) -#define NETARM_DMA7_STATUS (0x134) - -#define NETARM_DMA8_BFR_DESCRPTOR_PTR (0x140) -#define NETARM_DMA8_CONTROL (0x150) -#define NETARM_DMA8_STATUS (0x154) - -#define NETARM_DMA9_BFR_DESCRPTOR_PTR (0x160) -#define NETARM_DMA9_CONTROL (0x170) -#define NETARM_DMA9_STATUS (0x174) - -#define NETARM_DMA10_BFR_DESCRPTOR_PTR (0x180) -#define NETARM_DMA10_CONTROL (0x190) -#define NETARM_DMA10_STATUS (0x194) - -/* select bitfield defintions */ - -/* DMA Control Register ( 0xFF90_0XX0 ) */ - -#define NETARM_DMA_CTL_ENABLE (0x80000000) - -#define NETARM_DMA_CTL_ABORT (0x40000000) - -#define NETARM_DMA_CTL_BUS_100_PERCENT (0x00000000) -#define NETARM_DMA_CTL_BUS_75_PERCENT (0x10000000) -#define NETARM_DMA_CTL_BUS_50_PERCENT (0x20000000) -#define NETARM_DMA_CTL_BUS_25_PERCENT (0x30000000) - -#define NETARM_DMA_CTL_BUS_MASK (0x30000000) - -#define NETARM_DMA_CTL_MODE_FB_TO_MEM (0x00000000) -#define NETARM_DMA_CTL_MODE_FB_FROM_MEM (0x04000000) -#define NETARM_DMA_CTL_MODE_MEM_TO_MEM (0x08000000) - -#define NETARM_DMA_CTL_BURST_NONE (0x00000000) -#define NETARM_DMA_CTL_BURST_8_BYTE (0x01000000) -#define NETARM_DMA_CTL_BURST_16_BYTE (0x02000000) - -#define NETARM_DMA_CTL_BURST_MASK (0x03000000) - -#define NETARM_DMA_CTL_SRC_INCREMENT (0x00200000) - -#define NETARM_DMA_CTL_DST_INCREMENT (0x00100000) - -/* these apply only to ext xfers on DMA 3 or 4 */ - -#define NETARM_DMA_CTL_CH_3_4_REQ_EXT (0x00800000) - -#define NETARM_DMA_CTL_CH_3_4_DATA_32 (0x00000000) -#define NETARM_DMA_CTL_CH_3_4_DATA_16 (0x00010000) -#define NETARM_DMA_CTL_CH_3_4_DATA_8 (0x00020000) - -#define NETARM_DMA_CTL_STATE(X) ((X) & 0xFC00) -#define NETARM_DMA_CTL_INDEX(X) ((X) & 0x03FF) - -/* DMA Status Register ( 0xFF90_0XX4 ) */ - -#define NETARM_DMA_STAT_NC_INTPEN (0x80000000) -#define NETARM_DMA_STAT_EC_INTPEN (0x40000000) -#define NETARM_DMA_STAT_NR_INTPEN (0x20000000) -#define NETARM_DMA_STAT_CA_INTPEN (0x10000000) -#define NETARM_DMA_STAT_INTPEN_MASK (0xF0000000) - -#define NETARM_DMA_STAT_NC_INT_EN (0x00800000) -#define NETARM_DMA_STAT_EC_INT_EN (0x00400000) -#define NETARM_DMA_STAT_NR_INT_EN (0x00200000) -#define NETARM_DMA_STAT_CA_INT_EN (0x00100000) -#define NETARM_DMA_STAT_INT_EN_MASK (0x00F00000) - -#define NETARM_DMA_STAT_WRAP (0x00080000) -#define NETARM_DMA_STAT_IDONE (0x00040000) -#define NETARM_DMA_STAT_LAST (0x00020000) -#define NETARM_DMA_STAT_FULL (0x00010000) - -#define NETARM_DMA_STAT_BUFLEN(X) ((X) & 0x7FFF) - -/* DMA Buffer Descriptor Word 0 bitfields. */ - -#define NETARM_DMA_BD0_WRAP (0x80000000) -#define NETARM_DMA_BD0_IDONE (0x40000000) -#define NETARM_DMA_BD0_LAST (0x20000000) -#define NETARM_DMA_BD0_BUFPTR_MASK (0x1FFFFFFF) - -/* DMA Buffer Descriptor Word 1 bitfields. */ - -#define NETARM_DMA_BD1_STATUS_MASK (0xFFFF0000) -#define NETARM_DMA_BD1_FULL (0x00008000) -#define NETARM_DMA_BD1_BUFLEN_MASK (0x00007FFF) - -#ifndef __ASSEMBLER__ - -typedef struct __NETARM_DMA_Buff_Desc_FlyBy -{ - unsigned int word0; - unsigned int word1; -} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ; - -typedef struct __NETARM_DMA_Buff_Desc_M_to_M -{ - unsigned int word0; - unsigned int word1; - unsigned int word2; - unsigned int word3; -} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ; - -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h deleted file mode 100644 index 317b354513..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_eni_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : David Smith - */ - -#ifndef __NETARM_ENI_MODULE_REGISTERS_H -#define __NETARM_ENI_MODULE_REGISTERS_H - -/* ENI unit register offsets */ - -/* #ifdef CONFIG_ARCH_NETARM */ -#define NETARM_ENI_MODULE_BASE (0xFFA00000) -/* #endif / * CONFIG_ARCH_NETARM */ - -#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c))) -#define get_eni_ctl_reg_addr(minor) \ - (get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor)) - -#define NETARM_ENI_GENERAL_CONTROL (0x00) -#define NETARM_ENI_STATUS_CONTROL (0x04) -#define NETARM_ENI_FIFO_MODE_DATA (0x08) - -#define NETARM_ENI_1284_PORT1_CONTROL (0x10) -#define NETARM_ENI_1284_PORT2_CONTROL (0x14) -#define NETARM_ENI_1284_PORT3_CONTROL (0x18) -#define NETARM_ENI_1284_PORT4_CONTROL (0x1c) - -#define NETARM_ENI_1284_CHANNEL1_DATA (0x20) -#define NETARM_ENI_1284_CHANNEL2_DATA (0x24) -#define NETARM_ENI_1284_CHANNEL3_DATA (0x28) -#define NETARM_ENI_1284_CHANNEL4_DATA (0x2c) - -#define NETARM_ENI_ENI_CONTROL (0x30) -#define NETARM_ENI_ENI_PULSED_INTR (0x34) -#define NETARM_ENI_ENI_SHARED_RAM_ADDR (0x38) -#define NETARM_ENI_ENI_SHARED (0x3c) - -/* select bitfield defintions */ - -/* General Control Register (0xFFA0_0000) */ - -#define NETARM_ENI_GCR_ENIMODE_IEEE1284 (0x00000001) -#define NETARM_ENI_GCR_ENIMODE_SHRAM16 (0x00000004) -#define NETARM_ENI_GCR_ENIMODE_SHRAM8 (0x00000005) -#define NETARM_ENI_GCR_ENIMODE_FIFO16 (0x00000006) -#define NETARM_ENI_GCR_ENIMODE_FIFO8 (0x00000007) - -#define NETARM_ENI_GCR_ENIMODE_MASK (0x00000007) - -/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014, - 0xFFA0_0018, 0xFFA0_001c) */ - -#define NETARM_ENI_1284PC_PORT_ENABLE (0x80000000) -#define NETARM_ENI_1284PC_DMA_ENABLE (0x40000000) -#define NETARM_ENI_1284PC_OBE_INT_EN (0x20000000) -#define NETARM_ENI_1284PC_ACK_INT_EN (0x10000000) -#define NETARM_ENI_1284PC_ECP_MODE (0x08000000) -#define NETARM_ENI_1284PC_LOOPBACK_MODE (0x04000000) - -#define NETARM_ENI_1284PC_STROBE_TIME0 (0x00000000) /* 0.5 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME1 (0x01000000) /* 1.0 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME2 (0x02000000) /* 5.0 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME3 (0x03000000) /* 10.0 uS */ -#define NETARM_ENI_1284PC_STROBE_MASK (0x03000000) - -#define NETARM_ENI_1284PC_MAN_STROBE_EN (0x00800000) -#define NETARM_ENI_1284PC_FAST_MODE (0x00400000) -#define NETARM_ENI_1284PC_BIDIR_MODE (0x00200000) - -#define NETARM_ENI_1284PC_MAN_STROBE (0x00080000) -#define NETARM_ENI_1284PC_AUTO_FEED (0x00040000) -#define NETARM_ENI_1284PC_INIT (0x00020000) -#define NETARM_ENI_1284PC_HSELECT (0x00010000) -#define NETARM_ENI_1284PC_FE_INT_EN (0x00008000) -#define NETARM_ENI_1284PC_EPP_MODE (0x00004000) -#define NETARM_ENI_1284PC_IBR_INT_EN (0x00002000) -#define NETARM_ENI_1284PC_IBR (0x00001000) - -#define NETARM_ENI_1284PC_RXFDB_1BYTE (0x00000400) -#define NETARM_ENI_1284PC_RXFDB_2BYTE (0x00000800) -#define NETARM_ENI_1284PC_RXFDB_3BYTE (0x00000c00) -#define NETARM_ENI_1284PC_RXFDB_4BYTE (0x00000000) - -#define NETARM_ENI_1284PC_RBCC (0x00000200) -#define NETARM_ENI_1284PC_RBCT (0x00000100) -#define NETARM_ENI_1284PC_ACK (0x00000080) -#define NETARM_ENI_1284PC_FIFO_E (0x00000040) -#define NETARM_ENI_1284PC_OBE (0x00000020) -#define NETARM_ENI_1284PC_ACK_INT (0x00000010) -#define NETARM_ENI_1284PC_BUSY (0x00000008) -#define NETARM_ENI_1284PC_PE (0x00000004) -#define NETARM_ENI_1284PC_PSELECT (0x00000002) -#define NETARM_ENI_1284PC_FAULT (0x00000001) - -#endif /* __NETARM_ENI_MODULE_REGISTERS_H */ diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h deleted file mode 100644 index 8f2f36981a..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_eth_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Jackie Smith Cashion - * David Smith - */ - -#ifndef __NETARM_ETH_MODULE_REGISTERS_H -#define __NETARM_ETH_MODULE_REGISTERS_H - -/* ETH unit register offsets */ - -#define NETARM_ETH_MODULE_BASE (0xFF800000) - -#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c))) - -#define NETARM_ETH_GEN_CTRL (0x000) /* Ethernet Gen Control Reg */ -#define NETARM_ETH_GEN_STAT (0x004) /* Ethernet Gen Status Reg */ -#define NETARM_ETH_FIFO_DAT1 (0x008) /* Fifo Data Reg 1 */ -#define NETARM_ETH_FIFO_DAT2 (0x00C) /* Fifo Data Reg 2 */ -#define NETARM_ETH_TX_STAT (0x010) /* Transmit Status Reg */ -#define NETARM_ETH_RX_STAT (0x014) /* Receive Status Reg */ - -#define NETARM_ETH_MAC_CFG (0x400) /* MAC Configuration Reg */ -#define NETARM_ETH_PCS_CFG (0x408) /* PCS Configuration Reg */ -#define NETARM_ETH_STL_CFG (0x410) /* STL Configuration Reg */ -#define NETARM_ETH_B2B_IPG_GAP_TMR (0x440) /* Back-to-back IPG - Gap Timer Reg */ -#define NETARM_ETH_NB2B_IPG_GAP_TMR (0x444) /* Non Back-to-back - IPG Gap Timer Reg */ -#define NETARM_ETH_MII_CMD (0x540) /* MII (PHY) Command Reg */ -#define NETARM_ETH_MII_ADDR (0x544) /* MII Address Reg */ -#define NETARM_ETH_MII_WRITE (0x548) /* MII Write Data Reg */ -#define NETARM_ETH_MII_READ (0x54C) /* MII Read Data Reg */ -#define NETARM_ETH_MII_IND (0x550) /* MII Indicators Reg */ -#define NETARM_ETH_MIB_CRCEC (0x580) /* (MIB) CRC Error Counter */ -#define NETARM_ETH_MIB_AEC (0x584) /* Alignment Error Counter */ -#define NETARM_ETH_MIB_CEC (0x588) /* Code Error Counter */ -#define NETARM_ETH_MIB_LFC (0x58C) /* Long Frame Counter */ -#define NETARM_ETH_MIB_SFC (0x590) /* Short Frame Counter */ -#define NETARM_ETH_MIB_LCC (0x594) /* Late Collision Counter */ -#define NETARM_ETH_MIB_EDC (0x598) /* Excessive Deferral - Counter */ -#define NETARM_ETH_MIB_MCC (0x59C) /* Maximum Collision Counter */ -#define NETARM_ETH_SAL_FILTER (0x5C0) /* SAL Station Address - Filter Reg */ -#define NETARM_ETH_SAL_STATION_ADDR_1 (0x5C4) /* SAL Station Address - Reg */ -#define NETARM_ETH_SAL_STATION_ADDR_2 (0x5C8) -#define NETARM_ETH_SAL_STATION_ADDR_3 (0x5CC) -#define NETARM_ETH_SAL_HASH_TBL_1 (0x5D0) /* SAL Multicast Hash Table*/ -#define NETARM_ETH_SAL_HASH_TBL_2 (0x5D4) -#define NETARM_ETH_SAL_HASH_TBL_3 (0x5D8) -#define NETARM_ETH_SAL_HASH_TBL_4 (0x5DC) - -/* select bitfield defintions */ - -/* Ethernet General Control Register (0xFF80_0000) */ - -#define NETARM_ETH_GCR_ERX (0x80000000) /* Enable Receive FIFO */ -#define NETARM_ETH_GCR_ERXDMA (0x40000000) /* Enable Receive DMA */ -#define NETARM_ETH_GCR_ETX (0x00800000) /* Enable Transmit FIFO */ -#define NETARM_ETH_GCR_ETXDMA (0x00400000) /* Enable Transmit DMA */ -#define NETARM_ETH_GCR_ETXWM_50 (0x00100000) /* Transmit FIFO Water - Mark. Start transmit - when FIFO is 50% - full. */ -#define NETARM_ETH_GCR_PNA (0x00000400) /* pSOS pNA Buffer - Descriptor Format */ - -/* Ethernet General Status Register (0xFF80_0004) */ - -#define NETARM_ETH_GST_RXFDB (0x30000000) -#define NETARM_ETH_GST_RXREGR (0x08000000) /* Receive Register - Ready */ -#define NETARM_ETH_GST_RXFIFOH (0x04000000) -#define NETARM_ETH_GST_RXBR (0x02000000) -#define NETARM_ETH_GST_RXSKIP (0x01000000) - -#define NETARM_ETH_GST_TXBC (0x00020000) - - -/* Ethernet Transmit Status Register (0xFF80_0010) */ - -#define NETARM_ETH_TXSTAT_TXOK (0x00008000) - - -/* Ethernet Receive Status Register (0xFF80_0014) */ - -#define NETARM_ETH_RXSTAT_SIZE (0xFFFF0000) -#define NETARM_ETH_RXSTAT_RXOK (0x00002000) - - -/* PCS Configuration Register (0xFF80_0408) */ - -#define NETARM_ETH_PCSC_NOCFR (0x1) /* Disable Ciphering */ -#define NETARM_ETH_PCSC_ENJAB (0x2) /* Enable Jabber Protection */ -#define NETARM_ETH_PCSC_CLKS_25M (0x0) /* 25 MHz Clock Speed Select */ -#define NETARM_ETH_PCSC_CLKS_33M (0x4) /* 33 MHz Clock Speed Select */ - -/* STL Configuration Register (0xFF80_0410) */ - -#define NETARM_ETH_STLC_RXEN (0x2) /* Enable Packet Receiver */ -#define NETARM_ETH_STLC_AUTOZ (0x4) /* Auto Zero Statistics */ - -/* MAC Configuration Register (0xFF80_0400) */ - -#define NETARM_ETH_MACC_HUGEN (0x1) /* Enable Unlimited Transmit - Frame Sizes */ -#define NETARM_ETH_MACC_PADEN (0x4) /* Automatic Pad Fill Frames - to 64 Bytes */ -#define NETARM_ETH_MACC_CRCEN (0x8) /* Append CRC to Transmit - Frames */ - -/* MII (PHY) Command Register (0xFF80_0540) */ - -#define NETARM_ETH_MIIC_RSTAT (0x1) /* Single Scan for Read Data */ - -/* MII Indicators Register (0xFF80_0550) */ - -#define NETARM_ETH_MIII_BUSY (0x1) /* MII I/F Busy with - Read/Write */ - -/* SAL Station Address Filter Register (0xFF80_05C0) */ - -#define NETARM_ETH_SALF_PRO (0x8) /* Enable Promiscuous Mode */ -#define NETARM_ETH_SALF_PRM (0x4) /* Accept All Multicast - Packets */ -#define NETARM_ETH_SALF_PRA (0x2) /* Accept Mulitcast Packets - using Hash Table */ -#define NETARM_ETH_SALF_BROAD (0x1) /* Accept All Broadcast - Packets */ - - -#endif /* __NETARM_GEN_MODULE_REGISTERS_H */ diff --git a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h b/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h deleted file mode 100644 index 13656a3ad2..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_gen_module.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NETARM_GEN_MODULE_REGISTERS_H -#define __NETARM_GEN_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_GEN_MODULE_BASE (0xFFB00000) - -#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c))) - -#define NETARM_GEN_SYSTEM_CONTROL (0x00) -#define NETARM_GEN_STATUS_CONTROL (0x04) -#define NETARM_GEN_PLL_CONTROL (0x08) -#define NETARM_GEN_SOFTWARE_SERVICE (0x0c) - -#define NETARM_GEN_TIMER1_CONTROL (0x10) -#define NETARM_GEN_TIMER1_STATUS (0x14) -#define NETARM_GEN_TIMER2_CONTROL (0x18) -#define NETARM_GEN_TIMER2_STATUS (0x1c) - -#define NETARM_GEN_PORTA (0x20) -#ifndef CONFIG_NETARM_NS7520 -#define NETARM_GEN_PORTB (0x24) -#endif -#define NETARM_GEN_PORTC (0x28) - -#define NETARM_GEN_INTR_ENABLE (0x30) -#define NETARM_GEN_INTR_ENABLE_SET (0x34) -#define NETARM_GEN_INTR_ENABLE_CLR (0x38) -#define NETARM_GEN_INTR_STATUS_EN (0x34) -#define NETARM_GEN_INTR_STATUS_RAW (0x38) - -#define NETARM_GEN_CACHE_CONTROL1 (0x40) -#define NETARM_GEN_CACHE_CONTROL2 (0x44) - -/* select bitfield definitions */ - -/* System Control Register ( 0xFFB0_0000 ) */ - -#define NETARM_GEN_SYS_CFG_LENDIAN (0x80000000) -#define NETARM_GEN_SYS_CFG_BENDIAN (0x00000000) - -#define NETARM_GEN_SYS_CFG_BUSQRTR (0x00000000) -#define NETARM_GEN_SYS_CFG_BUSHALF (0x20000000) -#define NETARM_GEN_SYS_CFG_BUSFULL (0x40000000) - -#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000) - -#define NETARM_GEN_SYS_CFG_WDOG_EN (0x01000000) -#define NETARM_GEN_SYS_CFG_WDOG_IRQ (0x00000000) -#define NETARM_GEN_SYS_CFG_WDOG_FIQ (0x00400000) -#define NETARM_GEN_SYS_CFG_WDOG_RST (0x00800000) -#define NETARM_GEN_SYS_CFG_WDOG_24 (0x00000000) -#define NETARM_GEN_SYS_CFG_WDOG_26 (0x00100000) -#define NETARM_GEN_SYS_CFG_WDOG_28 (0x00200000) -#define NETARM_GEN_SYS_CFG_WDOG_29 (0x00300000) - -#define NETARM_GEN_SYS_CFG_BUSMON_EN (0x00040000) -#define NETARM_GEN_SYS_CFG_BUSMON_128 (0x00000000) -#define NETARM_GEN_SYS_CFG_BUSMON_64 (0x00010000) -#define NETARM_GEN_SYS_CFG_BUSMON_32 (0x00020000) -#define NETARM_GEN_SYS_CFG_BUSMON_16 (0x00030000) - -#define NETARM_GEN_SYS_CFG_USER_EN (0x00008000) -#define NETARM_GEN_SYS_CFG_BUSER_EN (0x00004000) - -#define NETARM_GEN_SYS_CFG_BUSARB_INT (0x00002000) -#define NETARM_GEN_SYS_CFG_BUSARB_EXT (0x00000000) - -#define NETARM_GEN_SYS_CFG_DMATST (0x00001000) - -#define NETARM_GEN_SYS_CFG_TEALAST (0x00000800) - -#define NETARM_GEN_SYS_CFG_ALIGN_ABORT (0x00000400) - -#define NETARM_GEN_SYS_CFG_CACHE_EN (0x00000200) - -#define NETARM_GEN_SYS_CFG_WRI_BUF_EN (0x00000100) - -#define NETARM_GEN_SYS_CFG_CACHE_INIT (0x00000080) - -/* PLL Control Register ( 0xFFB0_0008 ) */ - -#define NETARM_GEN_PLL_CTL_PLLCNT_MASK (0x0F000000) - -#define NETARM_GEN_PLL_CTL_PLLCNT(x) (((x)<<24) & \ - NETARM_GEN_PLL_CTL_PLLCNT_MASK) - -/* Defaults for POLTST and ICP Fields in PLL CTL */ -#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x) -#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6) -#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00) -#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C) - - -/* Software Service Register ( 0xFFB0_000C ) */ - -#define NETARM_GEN_SW_SVC_RESETA (0x123) -#define NETARM_GEN_SW_SVC_RESETB (0x321) - -/* PORT C Register ( 0xFFB0_0028 ) */ - -#ifndef CONFIG_NETARM_NS7520 -#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00)) -#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00)) -#else -#define NETARM_GEN_PORT_MODE(x) ((x)<<24) -#define NETARM_GEN_PORT_DIR(x) ((x)<<16) -#define NETARM_GEN_PORT_CSF(x) ((x)<<8) -#endif - -/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */ - -#define NETARM_GEN_TCTL_ENABLE (0x80000000) -#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000) - -#define NETARM_GEN_TCTL_USE_IRQ (0x00000000) -#define NETARM_GEN_TCTL_USE_FIQ (0x20000000) - -#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000) -#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF) - -#define NETARM_GEN_TSTAT_INTPEN (0x40000000) -#if ~defined(CONFIG_NETARM_NS7520) -#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF) -#else -#define NETARM_GEN_TSTAT_CTC_MASK (0x0FFFFFFF) -#endif - -/* prescale to msecs conversion */ - -#if !defined(CONFIG_NETARM_PLL_BYPASS) -#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \ - NETARM_GEN_TSTAT_CTC_MASK ) + \ - 1 ) ) / (NETARM_XTAL_FREQ/1000) ) - -#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \ - NETARM_GEN_TSTAT_CTC_MASK ) | \ - NETARM_GEN_TCTL_USE_PRESCALE ) - -#else -#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \ - NETARM_GEN_TSTAT_CTC_MASK ) + \ - 1 ) ) / (NETARM_XTAL_FREQ/1000) ) - -#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \ - NETARM_GEN_TSTAT_CTC_MASK ) | \ - NETARM_GEN_TCTL_USE_PRESCALE ) -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h b/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h deleted file mode 100644 index c650c3b004..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_mem_module.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NETARM_MEM_MODULE_REGISTERS_H -#define __NETARM_MEM_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_MEM_MODULE_BASE (0xFFC00000) - -#define NETARM_MEM_MODULE_CONFIG (0x00) -#define NETARM_MEM_CS0_BASE_ADDR (0x10) -#define NETARM_MEM_CS0_OPTIONS (0x14) -#define NETARM_MEM_CS1_BASE_ADDR (0x20) -#define NETARM_MEM_CS1_OPTIONS (0x24) -#define NETARM_MEM_CS2_BASE_ADDR (0x30) -#define NETARM_MEM_CS2_OPTIONS (0x34) -#define NETARM_MEM_CS3_BASE_ADDR (0x40) -#define NETARM_MEM_CS3_OPTIONS (0x44) -#define NETARM_MEM_CS4_BASE_ADDR (0x50) -#define NETARM_MEM_CS4_OPTIONS (0x54) - -/* select bitfield defintions */ - -/* Module Configuration Register ( 0xFFC0_0000 ) */ - -#define NETARM_MEM_CFG_REFR_COUNT_MASK (0xFF000000) -#define NETARM_MEM_CFG_REFRESH_EN (0x00800000) - -#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS (0x00000000) -#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS (0x00200000) -#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS (0x00400000) -#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS (0x00600000) - -#define NETARM_MEM_CFG_PORTC_AMUX (0x00100000) - -#define NETARM_MEM_CFG_A27_ADDR (0x00080000) -#define NETARM_MEM_CFG_A27_CS0OE (0x00000000) - -#define NETARM_MEM_CFG_A26_ADDR (0x00040000) -#define NETARM_MEM_CFG_A26_CS0WE (0x00000000) - -#define NETARM_MEM_CFG_A25_ADDR (0x00020000) -#define NETARM_MEM_CFG_A25_BLAST (0x00000000) - -#define NETARM_MEM_CFG_PORTC_AMUX2 (0x00010000) - - -/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */ -/* the expression will round down, so make sure to reverse it to verify */ -/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal */ -/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */ - -#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \ - (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \ - ) - (1) ) << (24))) - -#if 0 -/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */ -/* the expression will round down, so make sure to reverse it toverify */ -/* it is what you want. period = [( count + 1 ) * 4] / Fxtal */ - -#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \ - (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \ - ) - (1) ) << (24))) -#endif - -/* Base Address Registers (0xFFC0_00X0) */ - -#define NETARM_MEM_BAR_BASE_MASK (0xFFFFF000) - -/* macro to define base */ - -#define NETARM_MEM_BAR_BASE(x) ((x) & NETARM_MEM_BAR_BASE_MASK) - -#define NETARM_MEM_BAR_DRAM_FP (0x00000000) -#define NETARM_MEM_BAR_DRAM_EDO (0x00000100) -#define NETARM_MEM_BAR_DRAM_SYNC (0x00000200) - -#define NETARM_MEM_BAR_DRAM_MUX_INT (0x00000000) -#define NETARM_MEM_BAR_DRAM_MUX_EXT (0x00000080) - -#define NETARM_MEM_BAR_DRAM_MUX_BAL (0x00000000) -#define NETARM_MEM_BAR_DRAM_MUX_UNBAL (0x00000020) - -#define NETARM_MEM_BAR_1BCLK_IDLE (0x00000010) - -#define NETARM_MEM_BAR_DRAM_SEL (0x00000008) - -#define NETARM_MEM_BAR_BURST_EN (0x00000004) - -#define NETARM_MEM_BAR_WRT_PROT (0x00000002) - -#define NETARM_MEM_BAR_VALID (0x00000001) - -/* Option Registers (0xFFC0_00X4) */ - -/* macro to define which bits of the base are significant */ - -#define NETARM_MEM_OPT_BASE_USE(x) ((x) & NETARM_MEM_BAR_BASE_MASK) - -#define NETARM_MEM_OPT_WAIT_MASK (0x00000F00) - -#define NETARM_MEM_OPT_WAIT_STATES(x) (((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK ) - -#define NETARM_MEM_OPT_BCYC_1 (0x00000000) -#define NETARM_MEM_OPT_BCYC_2 (0x00000040) -#define NETARM_MEM_OPT_BCYC_3 (0x00000080) -#define NETARM_MEM_OPT_BCYC_4 (0x000000C0) - -#define NETARM_MEM_OPT_BSIZE_2 (0x00000000) -#define NETARM_MEM_OPT_BSIZE_4 (0x00000010) -#define NETARM_MEM_OPT_BSIZE_8 (0x00000020) -#define NETARM_MEM_OPT_BSIZE_16 (0x00000030) - -#define NETARM_MEM_OPT_32BIT (0x00000000) -#define NETARM_MEM_OPT_16BIT (0x00000004) -#define NETARM_MEM_OPT_8BIT (0x00000008) -#define NETARM_MEM_OPT_32BIT_EXT_ACK (0x0000000C) - -#define NETARM_MEM_OPT_BUS_SIZE_MASK (0x0000000C) - -#define NETARM_MEM_OPT_READ_ASYNC (0x00000000) -#define NETARM_MEM_OPT_READ_SYNC (0x00000002) - -#define NETARM_MEM_OPT_WRITE_ASYNC (0x00000000) -#define NETARM_MEM_OPT_WRITE_SYNC (0x00000001) - -#ifdef CONFIG_NETARM_NS7520 -/* The NS7520 has a second options register for each chip select */ -#define NETARM_MEM_CS0_OPTIONS_B (0x18) -#define NETARM_MEM_CS1_OPTIONS_B (0x28) -#define NETARM_MEM_CS2_OPTIONS_B (0x38) -#define NETARM_MEM_CS3_OPTIONS_B (0x48) -#define NETARM_MEM_CS4_OPTIONS_B (0x58) - -/* Option B Registers (0xFFC0_00x8) */ -#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001) -#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002) -#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000) -#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004) -#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008) -#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C) - -#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000) -#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010) -#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020) -#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030) -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_registers.h b/arch/arm/include/asm/arch-arm720t/netarm_registers.h deleted file mode 100644 index fa8812879a..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_registers.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * linux/include/asm-arm/arch-netarm/netarm_registers.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NET_ARM_REGISTERS_H -#define __NET_ARM_REGISTERS_H - -#include <config.h> - -/* fundamental constants : */ -/* the input crystal/clock frequency ( in Hz ) */ -#define NETARM_XTAL_FREQ_25MHz (18432000) -#define NETARM_XTAL_FREQ_33MHz (23698000) -#define NETARM_XTAL_FREQ_48MHz (48000000) -#define NETARM_XTAL_FREQ_55MHz (55000000) -#define NETARM_XTAL_FREQ_EMLIN1 (20000000) - -/* the frequency of SYS_CLK */ -#if defined(CONFIG_NETARM_EMLIN) - -/* EMLIN board: 33 MHz (exp.) */ -#define NETARM_PLL_COUNT_VAL 6 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET40_REV2) - -/* NET+40 Rev2 boards: 33 MHz (with NETARM_XTAL_FREQ_25MHz) */ -#define NETARM_PLL_COUNT_VAL 6 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET40_REV4) - -/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with - NETARM_XTAL_FREQ_25MHz) 4 */ -#define NETARM_PLL_COUNT_VAL 4 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET50) - -/* NET+50 boards: 40 MHz (with NETARM_XTAL_FREQ_25MHz) */ -#define NETARM_PLL_COUNT_VAL 8 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#else /* CONFIG_NETARM_NS7520 */ - -#define NETARM_PLL_COUNT_VAL 0 - -#if defined(CONFIG_BOARD_UNC20) -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_48MHz -#else -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_55MHz -#endif - -#endif - -/* #include "arm_registers.h" */ -#include <asm/arch/netarm_gen_module.h> -#include <asm/arch/netarm_mem_module.h> -#include <asm/arch/netarm_ser_module.h> -#include <asm/arch/netarm_eni_module.h> -#include <asm/arch/netarm_dma_module.h> -#include <asm/arch/netarm_eth_module.h> - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h b/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h deleted file mode 100644 index 6fbae11c8d..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/include/asm-arm/arch-netarm/netarm_ser_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * Clark Williams - */ - -#ifndef __NETARM_SER_MODULE_REGISTERS_H -#define __NETARM_SER_MODULE_REGISTERS_H - -#ifndef __ASSEMBLER__ - -/* (--sub)#include "types.h" */ - -/* serial channel control structure */ -typedef struct { - u32 ctrl_a; - u32 ctrl_b; - u32 status_a; - u32 bitrate; - u32 fifo; - u32 rx_buf_timer; - u32 rx_char_timer; - u32 rx_match; - u32 rx_match_mask; - u32 ctrl_c; - u32 status_b; - u32 status_c; - u32 fifo_last; - u32 unused[3]; -} netarm_serial_channel_t; - -#endif - -/* SER unit register offsets */ - -/* #ifdef CONFIG_ARCH_NETARM */ -#define NETARM_SER_MODULE_BASE (0xFFD00000) -/* #else */ -/* extern serial_channel_t netarm_dummy_registers[]; */ -/* #define NETARM_SER_MODULE_BASE (netarm_dummy_registers) */ -/* #ifndef NETARM_XTAL_FREQ */ -/* #define NETARM_XTAL_FREQ 18432000 */ -/* #endif */ -/* #endif */ - -/* calculate the sysclk value from the pll setting */ -#define NETARM_PLLED_SYSCLK_FREQ (( NETARM_XTAL_FREQ / 5 ) * \ - ( NETARM_PLL_COUNT_VAL + 3 )) - -#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c])) - -#define NETARM_SER_CH1_CTRL_A (0x00) -#define NETARM_SER_CH1_CTRL_B (0x04) -#define NETARM_SER_CH1_STATUS_A (0x08) -#define NETARM_SER_CH1_BITRATE (0x0C) -#define NETARM_SER_CH1_FIFO (0x10) -#define NETARM_SER_CH1_RX_BUF_TMR (0x14) -#define NETARM_SER_CH1_RX_CHAR_TMR (0x18) -#define NETARM_SER_CH1_RX_MATCH (0x1c) -#define NETARM_SER_CH1_RX_MATCH_MASK (0x20) -#define NETARM_SER_CH1_CTRL_C (0x24) -#define NETARM_SER_CH1_STATUS_B (0x28) -#define NETARM_SER_CH1_STATUS_C (0x2c) -#define NETARM_SER_CH1_FIFO_LAST (0x30) - -#define NETARM_SER_CH2_CTRL_A (0x40) -#define NETARM_SER_CH2_CTRL_B (0x44) -#define NETARM_SER_CH2_STATUS_A (0x48) -#define NETARM_SER_CH2_BITRATE (0x4C) -#define NETARM_SER_CH2_FIFO (0x50) -#define NETARM_SER_CH2_RX_BUF_TMR (0x54) -#define NETARM_SER_CH2_RX_CHAR_TMR (0x58) -#define NETARM_SER_CH2_RX_MATCH (0x5c) -#define NETARM_SER_CH2_RX_MATCH_MASK (0x60) -#define NETARM_SER_CH2_CTRL_C (0x64) -#define NETARM_SER_CH2_STATUS_B (0x68) -#define NETARM_SER_CH2_STATUS_C (0x6c) -#define NETARM_SER_CH2_FIFO_LAST (0x70) - -/* select bitfield defintions */ - -/* Control Register A */ - -#define NETARM_SER_CTLA_ENABLE (0x80000000) -#define NETARM_SER_CTLA_BRK (0x40000000) - -#define NETARM_SER_CTLA_STICKP (0x20000000) - -#define NETARM_SER_CTLA_P_EVEN (0x18000000) -#define NETARM_SER_CTLA_P_ODD (0x08000000) -#define NETARM_SER_CTLA_P_NONE (0x00000000) - -/* if you read the errata, you will find that the STOP bits don't work right */ -#define NETARM_SER_CTLA_2STOP (0x00000000) -#define NETARM_SER_CTLA_3STOP (0x04000000) - -#define NETARM_SER_CTLA_5BITS (0x00000000) -#define NETARM_SER_CTLA_6BITS (0x01000000) -#define NETARM_SER_CTLA_7BITS (0x02000000) -#define NETARM_SER_CTLA_8BITS (0x03000000) - -#define NETARM_SER_CTLA_CTSTX (0x00800000) -#define NETARM_SER_CTLA_RTSRX (0x00400000) - -#define NETARM_SER_CTLA_LOOP_REM (0x00200000) -#define NETARM_SER_CTLA_LOOP_LOC (0x00100000) - -#define NETARM_SER_CTLA_GPIO2 (0x00080000) -#define NETARM_SER_CTLA_GPIO1 (0x00040000) - -#define NETARM_SER_CTLA_DTR_EN (0x00020000) -#define NETARM_SER_CTLA_RTS_EN (0x00010000) - -#define NETARM_SER_CTLA_IE_RX_BRK (0x00008000) -#define NETARM_SER_CTLA_IE_RX_FRMERR (0x00004000) -#define NETARM_SER_CTLA_IE_RX_PARERR (0x00002000) -#define NETARM_SER_CTLA_IE_RX_OVERRUN (0x00001000) -#define NETARM_SER_CTLA_IE_RX_RDY (0x00000800) -#define NETARM_SER_CTLA_IE_RX_HALF (0x00000400) -#define NETARM_SER_CTLA_IE_RX_FULL (0x00000200) -#define NETARM_SER_CTLA_IE_RX_DMAEN (0x00000100) -#define NETARM_SER_CTLA_IE_RX_DCD (0x00000080) -#define NETARM_SER_CTLA_IE_RX_RI (0x00000040) -#define NETARM_SER_CTLA_IE_RX_DSR (0x00000020) - -#define NETARM_SER_CTLA_IE_RX_ALL (NETARM_SER_CTLA_IE_RX_BRK \ - |NETARM_SER_CTLA_IE_RX_FRMERR \ - |NETARM_SER_CTLA_IE_RX_PARERR \ - |NETARM_SER_CTLA_IE_RX_OVERRUN \ - |NETARM_SER_CTLA_IE_RX_RDY \ - |NETARM_SER_CTLA_IE_RX_HALF \ - |NETARM_SER_CTLA_IE_RX_FULL \ - |NETARM_SER_CTLA_IE_RX_DMAEN \ - |NETARM_SER_CTLA_IE_RX_DCD \ - |NETARM_SER_CTLA_IE_RX_RI \ - |NETARM_SER_CTLA_IE_RX_DSR) - -#define NETARM_SER_CTLA_IE_TX_CTS (0x00000010) -#define NETARM_SER_CTLA_IE_TX_EMPTY (0x00000008) -#define NETARM_SER_CTLA_IE_TX_HALF (0x00000004) -#define NETARM_SER_CTLA_IE_TX_FULL (0x00000002) -#define NETARM_SER_CTLA_IE_TX_DMAEN (0x00000001) - -#define NETARM_SER_CTLA_IE_TX_ALL (NETARM_SER_CTLA_IE_TX_CTS \ - |NETARM_SER_CTLA_IE_TX_EMPTY \ - |NETARM_SER_CTLA_IE_TX_HALF \ - |NETARM_SER_CTLA_IE_TX_FULL \ - |NETARM_SER_CTLA_IE_TX_DMAEN) - -/* Control Register B */ - -#define NETARM_SER_CTLB_MATCH1_EN (0x80000000) -#define NETARM_SER_CTLB_MATCH2_EN (0x40000000) -#define NETARM_SER_CTLB_MATCH3_EN (0x20000000) -#define NETARM_SER_CTLB_MATCH4_EN (0x10000000) - -#define NETARM_SER_CTLB_RBGT_EN (0x08000000) -#define NETARM_SER_CTLB_RCGT_EN (0x04000000) - -#define NETARM_SER_CTLB_UART_MODE (0x00000000) -#define NETARM_SER_CTLB_HDLC_MODE (0x00100000) -#define NETARM_SER_CTLB_SPI_MAS_MODE (0x00200000) -#define NETARM_SER_CTLB_SPI_SLV_MODE (0x00300000) - -#define NETARM_SER_CTLB_REV_BIT_ORDER (0x00080000) - -#define NETARM_SER_CTLB_MAM1 (0x00040000) -#define NETARM_SER_CTLB_MAM2 (0x00020000) - -/* Status Register A */ - -#define NETARM_SER_STATA_MATCH1 (0x80000000) -#define NETARM_SER_STATA_MATCH2 (0x40000000) -#define NETARM_SER_STATA_MATCH3 (0x20000000) -#define NETARM_SER_STATA_MATCH4 (0x10000000) - -#define NETARM_SER_STATA_BGAP (0x80000000) -#define NETARM_SER_STATA_CGAP (0x40000000) - -#define NETARM_SER_STATA_RX_1B (0x00100000) -#define NETARM_SER_STATA_RX_2B (0x00200000) -#define NETARM_SER_STATA_RX_3B (0x00300000) -#define NETARM_SER_STATA_RX_4B (0x00000000) - -/* downshifted values */ - -#define NETARM_SER_STATA_RXFDB_1BYTES (0x001) -#define NETARM_SER_STATA_RXFDB_2BYTES (0x002) -#define NETARM_SER_STATA_RXFDB_3BYTES (0x003) -#define NETARM_SER_STATA_RXFDB_4BYTES (0x000) - -#define NETARM_SER_STATA_RXFDB_MASK (0x00300000) -#define NETARM_SER_STATA_RXFDB(x) (((x) & NETARM_SER_STATA_RXFDB_MASK) \ - >> 20) - -#define NETARM_SER_STATA_DCD (0x00080000) -#define NETARM_SER_STATA_RI (0x00040000) -#define NETARM_SER_STATA_DSR (0x00020000) -#define NETARM_SER_STATA_CTS (0x00010000) - -#define NETARM_SER_STATA_RX_BRK (0x00008000) -#define NETARM_SER_STATA_RX_FRMERR (0x00004000) -#define NETARM_SER_STATA_RX_PARERR (0x00002000) -#define NETARM_SER_STATA_RX_OVERRUN (0x00001000) -#define NETARM_SER_STATA_RX_RDY (0x00000800) -#define NETARM_SER_STATA_RX_HALF (0x00000400) -#define NETARM_SER_STATA_RX_CLOSED (0x00000200) -#define NETARM_SER_STATA_RX_FULL (0x00000100) -#define NETARM_SER_STATA_RX_DCD (0x00000080) -#define NETARM_SER_STATA_RX_RI (0x00000040) -#define NETARM_SER_STATA_RX_DSR (0x00000020) - -#define NETARM_SER_STATA_TX_CTS (0x00000010) -#define NETARM_SER_STATA_TX_RDY (0x00000008) -#define NETARM_SER_STATA_TX_HALF (0x00000004) -#define NETARM_SER_STATA_TX_FULL (0x00000002) -#define NETARM_SER_STATA_TX_DMAEN (0x00000001) - -/* you have to clear all receive signals to get the fifo to move forward */ -#define NETARM_SER_STATA_CLR_ALL (NETARM_SER_STATA_RX_BRK | \ - NETARM_SER_STATA_RX_FRMERR | \ - NETARM_SER_STATA_RX_PARERR | \ - NETARM_SER_STATA_RX_OVERRUN | \ - NETARM_SER_STATA_RX_HALF | \ - NETARM_SER_STATA_RX_CLOSED | \ - NETARM_SER_STATA_RX_FULL | \ - NETARM_SER_STATA_RX_DCD | \ - NETARM_SER_STATA_RX_RI | \ - NETARM_SER_STATA_RX_DSR | \ - NETARM_SER_STATA_TX_CTS ) - -/* Bit Rate Registers */ - -#define NETARM_SER_BR_EN (0x80000000) -#define NETARM_SER_BR_TMODE (0x40000000) - -#define NETARM_SER_BR_RX_CLK_INT (0x00000000) -#define NETARM_SER_BR_RX_CLK_EXT (0x20000000) -#define NETARM_SER_BR_TX_CLK_INT (0x00000000) -#define NETARM_SER_BR_TX_CLK_EXT (0x10000000) - -#define NETARM_SER_BR_RX_CLK_DRV (0x08000000) -#define NETARM_SER_BR_TX_CLK_DRV (0x04000000) - -#define NETARM_SER_BR_CLK_EXT_5 (0x00000000) -#define NETARM_SER_BR_CLK_SYSTEM (0x01000000) -#define NETARM_SER_BR_CLK_OUT1A (0x02000000) -#define NETARM_SER_BR_CLK_OUT2A (0x03000000) - -#define NETARM_SER_BR_TX_CLK_INV (0x00800000) -#define NETARM_SER_BR_RX_CLK_INV (0x00400000) - -/* complete settings assuming system clock input is 18MHz */ - -#define NETARM_SER_BR_MASK (0x000007FF) - -/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */ -/* from section 7.5.4 of HW Ref Guide */ - -/* #ifdef CONFIG_NETARM_PLL_BYPASS */ -#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \ - NETARM_SER_BR_RX_CLK_INT | \ - NETARM_SER_BR_TX_CLK_INT | \ - NETARM_SER_BR_CLK_EXT_5 | \ - ( ( ( ( NETARM_XTAL_FREQ / \ - ( x * 10 ) ) - 1 ) / 16 ) & \ - NETARM_SER_BR_MASK ) ) -/* -#else -#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \ - NETARM_SER_BR_RX_CLK_INT | \ - NETARM_SER_BR_TX_CLK_INT | \ - NETARM_SER_BR_CLK_SYSTEM | \ - ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \ - ( x * 2 ) ) - 1 ) / 16 ) & \ - NETARM_SER_BR_MASK ) ) -#endif -*/ - -/* Receive Buffer Gap Timer */ - -#define NETARM_SER_RX_GAP_TIMER_EN (0x80000000) -#define NETARM_SER_RX_GAP_MASK (0x00003FFF) - -/* rx gap is a function of bit rate x */ - -/* #ifdef CONFIG_NETARM_PLL_BYPASS */ -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \ - ( x * 5 * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -/* -#else -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \ - ( x * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#endif -*/ - -#if 0 -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \ - ( x * 5 * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \ - ( x * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#endif - -#define MIN_BAUD_RATE 600 -#define MAX_BAUD_RATE 115200 - -/* the default BAUD rate for the BOOTLOADER, there is a separate */ -/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */ -#define DEFAULT_BAUD_RATE 9600 -#define NETARM_SER_FIFO_SIZE 32 -#define MIN_GAP 0 - -#endif diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/arm/include/asm/arch-lpc2292/hardware.h deleted file mode 100644 index 5e227e367c..0000000000 --- a/arch/arm/include/asm/arch-lpc2292/hardware.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#if defined(CONFIG_LPC2292) -#include <asm/arch-lpc2292/lpc2292_registers.h> -#else -#error No hardware file defined for this configuration -#endif - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h b/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h deleted file mode 100644 index 5715f3ef74..0000000000 --- a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h +++ /dev/null @@ -1,225 +0,0 @@ -#ifndef __LPC2292_REGISTERS_H -#define __LPC2292_REGISTERS_H - -#include <config.h> - -/* Macros for reading/writing registers */ -#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value)) -#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value)) -#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value)) -#define GET8(reg) (*(volatile unsigned char*)(reg)) -#define GET16(reg) (*(volatile unsigned short*)(reg)) -#define GET32(reg) (*(volatile unsigned int*)(reg)) - -/* External Memory Controller */ - -#define BCFG0 0xFFE00000 /* 32-bits */ -#define BCFG1 0xFFE00004 /* 32-bits */ -#define BCFG2 0xFFE00008 /* 32-bits */ -#define BCFG3 0xFFE0000c /* 32-bits */ - -/* System Control Block */ - -#define EXTINT 0xE01FC140 -#define EXTWAKE 0xE01FC144 -#define EXTMODE 0xE01FC148 -#define EXTPOLAR 0xE01FC14C -#define MEMMAP 0xE01FC040 -#define PLLCON 0xE01FC080 -#define PLLCFG 0xE01FC084 -#define PLLSTAT 0xE01FC088 -#define PLLFEED 0xE01FC08C -#define PCON 0xE01FC0C0 -#define PCONP 0xE01FC0C4 -#define VPBDIV 0xE01FC100 - -/* Memory Acceleration Module */ - -#define MAMCR 0xE01FC000 -#define MAMTIM 0xE01FC004 - -/* Vectored Interrupt Controller */ - -#define VICIRQStatus 0xFFFFF000 -#define VICFIQStatus 0xFFFFF004 -#define VICRawIntr 0xFFFFF008 -#define VICIntSelect 0xFFFFF00C -#define VICIntEnable 0xFFFFF010 -#define VICIntEnClr 0xFFFFF014 -#define VICSoftInt 0xFFFFF018 -#define VICSoftIntClear 0xFFFFF01C -#define VICProtection 0xFFFFF020 -#define VICVectAddr 0xFFFFF030 -#define VICDefVectAddr 0xFFFFF034 -#define VICVectAddr0 0xFFFFF100 -#define VICVectAddr1 0xFFFFF104 -#define VICVectAddr2 0xFFFFF108 -#define VICVectAddr3 0xFFFFF10C -#define VICVectAddr4 0xFFFFF110 -#define VICVectAddr5 0xFFFFF114 -#define VICVectAddr6 0xFFFFF118 -#define VICVectAddr7 0xFFFFF11C -#define VICVectAddr8 0xFFFFF120 -#define VICVectAddr9 0xFFFFF124 -#define VICVectAddr10 0xFFFFF128 -#define VICVectAddr11 0xFFFFF12C -#define VICVectAddr12 0xFFFFF130 -#define VICVectAddr13 0xFFFFF134 -#define VICVectAddr14 0xFFFFF138 -#define VICVectAddr15 0xFFFFF13C -#define VICVectCntl0 0xFFFFF200 -#define VICVectCntl1 0xFFFFF204 -#define VICVectCntl2 0xFFFFF208 -#define VICVectCntl3 0xFFFFF20C -#define VICVectCntl4 0xFFFFF210 -#define VICVectCntl5 0xFFFFF214 -#define VICVectCntl6 0xFFFFF218 -#define VICVectCntl7 0xFFFFF21C -#define VICVectCntl8 0xFFFFF220 -#define VICVectCntl9 0xFFFFF224 -#define VICVectCntl10 0xFFFFF228 -#define VICVectCntl11 0xFFFFF22C -#define VICVectCntl12 0xFFFFF230 -#define VICVectCntl13 0xFFFFF234 -#define VICVectCntl14 0xFFFFF238 -#define VICVectCntl15 0xFFFFF23C - -/* Pin connect block */ - -#define PINSEL0 0xE002C000 /* 32 bits */ -#define PINSEL1 0xE002C004 /* 32 bits */ -#define PINSEL2 0xE002C014 /* 32 bits */ - -/* GPIO */ - -#define IO0PIN 0xE0028000 -#define IO0SET 0xE0028004 -#define IO0DIR 0xE0028008 -#define IO0CLR 0xE002800C -#define IO1PIN 0xE0028010 -#define IO1SET 0xE0028014 -#define IO1DIR 0xE0028018 -#define IO1CLR 0xE002801C -#define IO2PIN 0xE0028020 -#define IO2SET 0xE0028024 -#define IO2DIR 0xE0028028 -#define IO2CLR 0xE002802C -#define IO3PIN 0xE0028030 -#define IO3SET 0xE0028034 -#define IO3DIR 0xE0028038 -#define IO3CLR 0xE002803C - -/* Uarts */ - -#define U0RBR 0xE000C000 -#define U0THR 0xE000C000 -#define U0IER 0xE000C004 -#define U0IIR 0xE000C008 -#define U0FCR 0xE000C008 -#define U0LCR 0xE000C00C -#define U0LSR 0xE000C014 -#define U0SCR 0xE000C01C -#define U0DLL 0xE000C000 -#define U0DLM 0xE000C004 - -#define U1RBR 0xE0010000 -#define U1THR 0xE0010000 -#define U1IER 0xE0010004 -#define U1IIR 0xE0010008 -#define U1FCR 0xE0010008 -#define U1LCR 0xE001000C -#define U1MCR 0xE0010010 -#define U1LSR 0xE0010014 -#define U1MSR 0xE0010018 -#define U1SCR 0xE001001C -#define U1DLL 0xE0010000 -#define U1DLM 0xE0010004 - -/* I2C */ - -#define I2CONSET 0xE001C000 -#define I2STAT 0xE001C004 -#define I2DAT 0xE001C008 -#define I2ADR 0xE001C00C -#define I2SCLH 0xE001C010 -#define I2SCLL 0xE001C014 -#define I2CONCLR 0xE001C018 - -/* SPI */ - -#define S0SPCR 0xE0020000 -#define S0SPSR 0xE0020004 -#define S0SPDR 0xE0020008 -#define S0SPCCR 0xE002000C -#define S0SPINT 0xE002001C - -#define S1SPCR 0xE0030000 -#define S1SPSR 0xE0030004 -#define S1SPDR 0xE0030008 -#define S1SPCCR 0xE003000C -#define S1SPINT 0xE003001C - -/* CAN controller */ - -/* skip for now */ - -/* Timers */ - -#define T0IR 0xE0004000 -#define T0TCR 0xE0004004 -#define T0TC 0xE0004008 -#define T0PR 0xE000400C -#define T0PC 0xE0004010 -#define T0MCR 0xE0004014 -#define T0MR0 0xE0004018 -#define T0MR1 0xE000401C -#define T0MR2 0xE0004020 -#define T0MR3 0xE0004024 -#define T0CCR 0xE0004028 -#define T0CR0 0xE000402C -#define T0CR1 0xE0004030 -#define T0CR2 0xE0004034 -#define T0CR3 0xE0004038 -#define T0EMR 0xE000403C - -#define T1IR 0xE0008000 -#define T1TCR 0xE0008004 -#define T1TC 0xE0008008 -#define T1PR 0xE000800C -#define T1PC 0xE0008010 -#define T1MCR 0xE0008014 -#define T1MR0 0xE0008018 -#define T1MR1 0xE000801C -#define T1MR2 0xE0008020 -#define T1MR3 0xE0008024 -#define T1CCR 0xE0008028 -#define T1CR0 0xE000802C -#define T1CR1 0xE0008030 -#define T1CR2 0xE0008034 -#define T1CR3 0xE0008038 -#define T1EMR 0xE000803C - -/* PWM */ - -/* skip for now */ - -/* A/D converter */ - -/* skip for now */ - -/* Real Time Clock */ - -/* skip for now */ - -/* Watchdog */ - -#define WDMOD 0xE0000000 -#define WDTC 0xE0000004 -#define WDFEED 0xE0000008 -#define WDTV 0xE000000C - -/* EmbeddedICE LOGIC */ - -/* skip for now */ - -#endif diff --git a/arch/arm/include/asm/arch-lpc2292/spi.h b/arch/arm/include/asm/arch-lpc2292/spi.h deleted file mode 100644 index 6ae66e8ba7..0000000000 --- a/arch/arm/include/asm/arch-lpc2292/spi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - This file defines the interface to the lpc22xx SPI module. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This file may be included in software not adhering to the GPL. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef SPI_H -#define SPI_H - -#include <config.h> -#include <common.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> - -#define SPIF 0x80 - -#define spi_lock() disable_interrupts(); -#define spi_unlock() enable_interrupts(); - -extern unsigned long spi_flags; -extern unsigned char spi_idle; - -int spi_init(void); - -static inline unsigned char spi_read(void) -{ - unsigned char b; - - PUT8(S0SPDR, spi_idle); - while (!(GET8(S0SPSR) & SPIF)); - b = GET8(S0SPDR); - - return b; -} - -static inline void spi_write(unsigned char b) -{ - PUT8(S0SPDR, b); - while (!(GET8(S0SPSR) & SPIF)); - GET8(S0SPDR); /* this will clear the SPIF bit */ -} - -static inline void spi_set_clock(unsigned char clk_value) -{ - PUT8(S0SPCCR, clk_value); -} - -static inline void spi_set_cfg(unsigned char phase, - unsigned char polarity, - unsigned char lsbf) -{ - unsigned char v = 0x20; /* master bit set */ - - if (phase) - v |= 0x08; /* set phase bit */ - if (polarity) { - v |= 0x10; /* set polarity bit */ - spi_idle = 0xFF; - } else { - spi_idle = 0x00; - } - if (lsbf) - v |= 0x40; /* set lsbf bit */ - - PUT8(S0SPCR, v); -} -#endif /* SPI_H */ diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index 54add4b456..ffaffbb3bf 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -190,6 +190,7 @@ struct panel_config { #define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw)) #define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw)) +#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1)) /* Generic DSS Functions */ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, diff --git a/arch/arm/include/asm/arch-s3c4510b/hardware.h b/arch/arm/include/asm/arch-s3c4510b/hardware.h deleted file mode 100644 index 6b8c8edd7a..0000000000 --- a/arch/arm/include/asm/arch-s3c4510b/hardware.h +++ /dev/null @@ -1,272 +0,0 @@ -#ifndef __HW_S3C4510_H -#define __HW_S3C4510_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Description: Samsung S3C4510B register layout - */ - -/*------------------------------------------------------------------------ - * ASIC Address Definition - *----------------------------------------------------------------------*/ - -/* L1 8KB on chip SRAM base address */ -#define SRAM_BASE (0x03fe0000) - -/* Special Register Start Address After System Reset */ -#define REG_BASE (0x03ff0000) -#define SPSTR (REG_BASE) - -/* *********************** */ -/* System Manager Register */ -/* *********************** */ -#define REG_SYSCFG (REG_BASE+0x0000) - -#define REG_CLKCON (REG_BASE+0x3000) -#define REG_EXTACON0 (REG_BASE+0x3008) -#define REG_EXTACON1 (REG_BASE+0x300c) -#define REG_EXTDBWTH (REG_BASE+0x3010) -#define REG_ROMCON0 (REG_BASE+0x3014) -#define REG_ROMCON1 (REG_BASE+0x3018) -#define REG_ROMCON2 (REG_BASE+0x301c) -#define REG_ROMCON3 (REG_BASE+0x3020) -#define REG_ROMCON4 (REG_BASE+0x3024) -#define REG_ROMCON5 (REG_BASE+0x3028) -#define REG_DRAMCON0 (REG_BASE+0x302c) -#define REG_DRAMCON1 (REG_BASE+0x3030) -#define REG_DRAMCON2 (REG_BASE+0x3034) -#define REG_DRAMCON3 (REG_BASE+0x3038) -#define REG_REFEXTCON (REG_BASE+0x303c) - -/* *********************** */ -/* Ethernet BDMA Register */ -/* *********************** */ -#define REG_BDMATXCON (REG_BASE+0x9000) -#define REG_BDMARXCON (REG_BASE+0x9004) -#define REG_BDMATXPTR (REG_BASE+0x9008) -#define REG_BDMARXPTR (REG_BASE+0x900c) -#define REG_BDMARXLSZ (REG_BASE+0x9010) -#define REG_BDMASTAT (REG_BASE+0x9014) - -/* Content Address Memory */ -#define REG_CAM_BASE (REG_BASE+0x9100) - -#define REG_BDMATXBUF (REG_BASE+0x9200) -#define REG_BDMARXBUF (REG_BASE+0x9800) - -/* *********************** */ -/* Ethernet MAC Register */ -/* *********************** */ -#define REG_MACCON (REG_BASE+0xa000) -#define REG_CAMCON (REG_BASE+0xa004) -#define REG_MACTXCON (REG_BASE+0xa008) -#define REG_MACTXSTAT (REG_BASE+0xa00c) -#define REG_MACRXCON (REG_BASE+0xa010) -#define REG_MACRXSTAT (REG_BASE+0xa014) -#define REG_STADATA (REG_BASE+0xa018) -#define REG_STACON (REG_BASE+0xa01c) -#define REG_CAMEN (REG_BASE+0xa028) -#define REG_EMISSCNT (REG_BASE+0xa03c) -#define REG_EPZCNT (REG_BASE+0xa040) -#define REG_ERMPZCNT (REG_BASE+0xa044) -#define REG_ETXSTAT (REG_BASE+0x9040) -#define REG_MACRXDESTR (REG_BASE+0xa064) -#define REG_MACRXSTATEM (REG_BASE+0xa090) -#define REG_MACRXFIFO (REG_BASE+0xa200) - -/********************/ -/* I2C Bus Register */ -/********************/ -#define REG_I2C_CON (REG_BASE+0xf000) -#define REG_I2C_BUF (REG_BASE+0xf004) -#define REG_I2C_PS (REG_BASE+0xf008) -#define REG_I2C_COUNT (REG_BASE+0xf00c) - -/********************/ -/* GDMA 0 */ -/********************/ -#define REG_GDMACON0 (REG_BASE+0xb000) -#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020) -#define REG_GDMASRC0 (REG_BASE+0xb004) -#define REG_GDMADST0 (REG_BASE+0xb008) -#define REG_GDMACNT0 (REG_BASE+0xb00c) - -/********************/ -/* GDMA 1 */ -/********************/ -#define REG_GDMACON1 (REG_BASE+0xc000) -#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020) -#define REG_GDMASRC1 (REG_BASE+0xc004) -#define REG_GDMADST1 (REG_BASE+0xc008) -#define REG_GDMACNT1 (REG_BASE+0xc00c) - -/********************/ -/* UART 0 */ -/********************/ -#define UART0_BASE (REG_BASE+0xd000) -#define REG_UART0_LCON (REG_BASE+0xd000) -#define REG_UART0_CTRL (REG_BASE+0xd004) -#define REG_UART0_STAT (REG_BASE+0xd008) -#define REG_UART0_TXB (REG_BASE+0xd00c) -#define REG_UART0_RXB (REG_BASE+0xd010) -#define REG_UART0_BAUD_DIV (REG_BASE+0xd014) -#define REG_UART0_BAUD_CNT (REG_BASE+0xd018) -#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C) - -/********************/ -/* UART 1 */ -/********************/ -#define UART1_BASE (REG_BASE+0xe000) -#define REG_UART1_LCON (REG_BASE+0xe000) -#define REG_UART1_CTRL (REG_BASE+0xe004) -#define REG_UART1_STAT (REG_BASE+0xe008) -#define REG_UART1_TXB (REG_BASE+0xe00c) -#define REG_UART1_RXB (REG_BASE+0xe010) -#define REG_UART1_BAUD_DIV (REG_BASE+0xe014) -#define REG_UART1_BAUD_CNT (REG_BASE+0xe018) -#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C) - -/********************/ -/* Timer Register */ -/********************/ -#define REG_TMOD (REG_BASE+0x6000) -#define REG_TDATA0 (REG_BASE+0x6004) -#define REG_TDATA1 (REG_BASE+0x6008) -#define REG_TCNT0 (REG_BASE+0x600c) -#define REG_TCNT1 (REG_BASE+0x6010) - -/**********************/ -/* I/O Port Interface */ -/**********************/ -#define REG_IOPMODE (REG_BASE+0x5000) -#define REG_IOPCON (REG_BASE+0x5004) -#define REG_IOPDATA (REG_BASE+0x5008) - -/*********************************/ -/* Interrupt Controller Register */ -/*********************************/ -#define REG_INTMODE (REG_BASE+0x4000) -#define REG_INTPEND (REG_BASE+0x4004) -#define REG_INTMASK (REG_BASE+0x4008) - -#define REG_INTPRI0 (REG_BASE+0x400c) -#define REG_INTPRI1 (REG_BASE+0x4010) -#define REG_INTPRI2 (REG_BASE+0x4014) -#define REG_INTPRI3 (REG_BASE+0x4018) -#define REG_INTPRI4 (REG_BASE+0x401c) -#define REG_INTPRI5 (REG_BASE+0x4020) -#define REG_INTOFFSET (REG_BASE+0x4024) -#define REG_INTPNDPRI (REG_BASE+0x4028) -#define REG_INTPNDTST (REG_BASE+0x402C) - -/*********************************/ -/* CACHE CONTROL MASKS */ -/*********************************/ -#define CACHE_STALL (0x00000001) -#define CACHE_ENABLE (0x00000002) -#define CACHE_WRITE_BUFF (0x00000004) -#define CACHE_MODE (0x00000030) -#define CACHE_MODE_00 (0x00000000) -#define CACHE_MODE_01 (0x00000010) -#define CACHE_MODE_10 (0x00000020) - -/*********************************/ -/* CACHE RAM BASE ADDRESSES */ -/*********************************/ -#define CACHE_SET0_RAM (0x10000000) -#define CACHE_SET1_RAM (0x10800000) -#define CACHE_TAG_RAM (0x11000000) - -/*********************************/ -/* CACHE_DISABLE MASK */ -/*********************************/ -#define CACHE_DISABLE_MASK (0x04000000) - -#define GET_REG(reg) (*((volatile u32 *)(reg))) -#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val))) -#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask)) -#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask)) -#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val))) -#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF))) -#define GET__U8(reg) (*((volatile u8 *)(reg))) - -#define PUT_LED(val) (PUT_REG(REG_IOPDATA, (~val)&0xFF)) -#define GET_LED() ((~GET_REG( REG_IOPDATA)) & 0xFF) -#define SET_LED(val) { u32 led = GET_LED(); led |= 1 << (val); PUT_LED( led); } -#define CLR_LED(val) { u32 led = GET_LED(); led &= ~(1 << (val)); PUT_LED( led); } - -/***********************************/ -/* CLOCK CONSTANTS -- 50 MHz Clock */ -/***********************************/ - -#define CLK_FREQ_MHZ (50) -#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */ -#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */ - -/*********************************************************/ -/* TIMER MODE REGISTER */ -/*********************************************************/ -#define TM0_RUN 0x01 /* Timer 0 enable */ -#define TM0_TOGGLE 0x02 /* 0, interval mode */ -#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */ -#define TM1_RUN 0x08 /* Timer 1 enable */ -#define TM1_TOGGLE 0x10 /* 0, interval mode */ -#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */ - - -/*********************************/ -/* INTERRUPT SOURCES */ -/*********************************/ -#define INT_EXTINT0 0 -#define INT_EXTINT1 1 -#define INT_EXTINT2 2 -#define INT_EXTINT3 3 -#define INT_UARTTX0 4 -#define INT_UARTRX0 5 -#define INT_UARTTX1 6 -#define INT_UARTRX1 7 -#define INT_GDMA0 8 -#define INT_GDMA1 9 -#define INT_TIMER0 10 -#define INT_TIMER1 11 -#define INT_HDLCTXA 12 -#define INT_HDLCRXA 13 -#define INT_HDLCTXB 14 -#define INT_HDLCRXB 15 -#define INT_BDMATX 16 -#define INT_BDMARX 17 -#define INT_MACTX 18 -#define INT_MACRX 19 -#define INT_IIC 20 -#define INT_GLOBAL 21 -#define N_IRQS (21) - -#ifndef __ASSEMBLER__ -struct _irq_handler { - void *m_data; - void (*m_func)( void *data); -}; - -#endif - -#endif /* __S3C4510_h */ diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 06028aa01e..edb088680d 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -31,6 +31,7 @@ #include <asm/arch/clk.h> #include <lcd.h> #include <atmel_hlcdc.h> +#include <atmel_mci.h> #ifdef CONFIG_MACB #include <net.h> #endif @@ -258,6 +259,15 @@ void spi_cs_deactivate(struct spi_slave *slave) } #endif /* CONFIG_ATMEL_SPI */ +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_HSMCI0); +} +#endif + int board_early_init_f(void) { at91_seriald_hw_init(); diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 7c9d34ab84..9fe6408ecf 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -27,6 +27,8 @@ #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/omap_gpio.h> +#include <asm/arch/dss.h> +#include <asm/arch/clocks.h> #include "errno.h" #include <i2c.h> #ifdef CONFIG_USB_EHCI @@ -37,12 +39,16 @@ DECLARE_GLOBAL_DATA_PTR; -#define HOT_WATER_BUTTON 38 +#define HOT_WATER_BUTTON 42 +#define LCD_OUTPUT 55 + +/* Address of the framebuffer in RAM. */ +#define FB_START_ADDRESS 0x88000000 #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; @@ -67,6 +73,8 @@ int board_init(void) /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + gpio_direction_output(LCD_OUTPUT, 0); + return 0; } @@ -87,6 +95,7 @@ int board_late_init(void) return 0; setenv("bootcmd", "run swupdate"); + return 0; } #endif @@ -109,15 +118,34 @@ int board_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_USB_EHCI_OMAP -#define USB_HOST_PWR_EN 132 -int board_usb_init(void) +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) + +static struct panel_config lcd_cfg = { + .timing_h = PANEL_TIMING_H(40, 40, 48), + .timing_v = PANEL_TIMING_V(29, 13, 3), + .pol_freq = 0x00003000, /* Pol Freq */ + .divisor = 0x0001000E, + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + .lcd_size = PANEL_LCD_SIZE(800, 480), +}; + +int board_video_init(void) { - if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) { - puts("Failed to get USB_HOST_PWR_EN pin\n"); - return -ENODEV; - } - gpio_direction_output(USB_HOST_PWR_EN, 1); + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + void *fb; + + fb = (void *)FB_START_ADDRESS; + + lcd_cfg.frame_buffer = fb; + + setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON); + setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON); + + omap3_dss_panel_config(&lcd_cfg); + omap3_dss_enable(); return 0; } diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 867cc9e88d..0d4c642203 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -96,7 +96,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \ /* GPIO_43 LCD buffer enable */ \ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ @@ -143,28 +143,28 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\ - MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ /* CAMERA */\ @@ -264,6 +264,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \ + /* GPIO_170 Touchscreen ISR */\ /* McSPI */\ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ @@ -313,11 +315,11 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ /* HECC */\ - MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \ + MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \ /* HSUSB */\ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S index 9283201201..9daa0da614 100644 --- a/board/samsung/origen/lowlevel_init.S +++ b/board/samsung/origen/lowlevel_init.S @@ -158,7 +158,22 @@ system_clock_init: ldr r2, =CLK_SRC_PERIL0_OFFSET str r1, [r0, r2] - /* FIMD0 */ + /* CAM , FIMC 0-3 */ + ldr r1, =CLK_SRC_CAM_VAL + ldr r2, =CLK_SRC_CAM_OFFSET + str r1, [r0, r2] + + /* MFC */ + ldr r1, =CLK_SRC_MFC_VAL + ldr r2, =CLK_SRC_MFC_OFFSET + str r1, [r0, r2] + + /* G3D */ + ldr r1, =CLK_SRC_G3D_VAL + ldr r2, =CLK_SRC_G3D_OFFSET + str r1, [r0, r2] + + /* LCD0 */ ldr r1, =CLK_SRC_LCD0_VAL ldr r2, =CLK_SRC_LCD0_OFFSET str r1, [r0, r2] @@ -223,6 +238,26 @@ system_clock_init: ldr r2, =CLK_DIV_PERIL0_OFFSET str r1, [r0, r2] + /* CAM, FIMC 0-3: CAM Clock Divisors */ + ldr r1, =CLK_DIV_CAM_VAL + ldr r2, =CLK_DIV_CAM_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_MFC: MFC Clock Divisors */ + ldr r1, =CLK_DIV_MFC_VAL + ldr r2, =CLK_DIV_MFC_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_G3D: G3D Clock Divisors */ + ldr r1, =CLK_DIV_G3D_VAL + ldr r2, =CLK_DIV_G3D_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_LCD0: LCD0 Clock Divisors */ + ldr r1, =CLK_DIV_LCD0_VAL + ldr r2, =CLK_DIV_LCD0_OFFSET + str r1, [r0, r2] + /* Set PLL locktime */ ldr r1, =PLL_LOCKTIME ldr r2, =APLL_LOCK_OFFSET diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h index 94cccca52c..930b948505 100644 --- a/board/samsung/origen/origen_setup.h +++ b/board/samsung/origen/origen_setup.h @@ -53,7 +53,18 @@ #define CLK_DIV_FSYS2_OFFSET 0xC548 #define CLK_DIV_FSYS3_OFFSET 0xC54C +#define CLK_SRC_CAM_OFFSET 0xC220 +#define CLK_SRC_TV_OFFSET 0xC224 +#define CLK_SRC_MFC_OFFSET 0xC228 +#define CLK_SRC_G3D_OFFSET 0xC22C +#define CLK_SRC_LCD0_OFFSET 0xC234 #define CLK_SRC_PERIL0_OFFSET 0xC250 + +#define CLK_DIV_CAM_OFFSET 0xC520 +#define CLK_DIV_TV_OFFSET 0xC524 +#define CLK_DIV_MFC_OFFSET 0xC528 +#define CLK_DIV_G3D_OFFSET 0xC52C +#define CLK_DIV_LCD0_OFFSET 0xC534 #define CLK_DIV_PERIL0_OFFSET 0xC550 #define CLK_SRC_LCD0_OFFSET 0xC234 @@ -353,6 +364,65 @@ | (UART1_RATIO << 4) \ | (UART0_RATIO << 0)) +/* Clock Source CAM/FIMC */ +/* CLK_SRC_CAM */ +#define CAM0_SEL_XUSBXTI 1 +#define CAM1_SEL_XUSBXTI 1 +#define CSIS0_SEL_XUSBXTI 1 +#define CSIS1_SEL_XUSBXTI 1 + +#define FIMC_SEL_SCLKMPLL 6 +#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL + +#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ + | (CSIS0_SEL_XUSBXTI << 24) \ + | (CAM1_SEL_XUSBXTI << 20) \ + | (CAM0_SEL_XUSBXTI << 16) \ + | (FIMC3_LCLK_SEL << 12) \ + | (FIMC2_LCLK_SEL << 8) \ + | (FIMC1_LCLK_SEL << 4) \ + | (FIMC0_LCLK_SEL << 0)) + +/* SCLK CAM */ +/* CLK_DIV_CAM */ +#define FIMC0_LCLK_RATIO 4 +#define FIMC1_LCLK_RATIO 4 +#define FIMC2_LCLK_RATIO 4 +#define FIMC3_LCLK_RATIO 4 +#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ + | (FIMC2_LCLK_RATIO << 8) \ + | (FIMC1_LCLK_RATIO << 4) \ + | (FIMC0_LCLK_RATIO << 0)) + +/* SCLK MFC */ +/* CLK_SRC_MFC */ +#define MFC_SEL_MPLL 0 +#define MOUTMFC_0 0 +#define MFC_SEL MOUTMFC_0 +#define MFC_0_SEL MFC_SEL_MPLL +#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) + + +/* CLK_DIV_MFC */ +#define MFC_RATIO 3 +#define CLK_DIV_MFC_VAL (MFC_RATIO) + +/* SCLK G3D */ +/* CLK_SRC_G3D */ +#define G3D_SEL_MPLL 0 +#define MOUTG3D_0 0 +#define G3D_SEL MOUTG3D_0 +#define G3D_0_SEL G3D_SEL_MPLL +#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) + +/* CLK_DIV_G3D */ +#define G3D_RATIO 1 +#define CLK_DIV_G3D_VAL (G3D_RATIO) + +/* SCLK LCD0 */ /* CLK_SRC_LCD0 */ #define FIMD_SEL_SCLKMPLL 6 #define MDNIE0_SEL_XUSBXTI 1 @@ -363,6 +433,10 @@ | (MDNIE0_SEL_XUSBXTI << 4) \ | (FIMD_SEL_SCLKMPLL << 0)) +/* CLK_DIV_LCD0 */ +#define FIMD0_RATIO 4 +#define CLK_DIV_LCD0_VAL (FIMD0_RATIO) + /* Required period to generate a stable clock output */ /* PLL_LOCK_TIME */ #define PLL_LOCKTIME 0x1C20 diff --git a/board/sx1/Makefile b/board/sx1/Makefile deleted file mode 100644 index 292459f254..0000000000 --- a/board/sx1/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# (C) Copyright 2004-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := sx1.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/sx1/config.mk b/board/sx1/config.mk deleted file mode 100644 index 441bea2a03..0000000000 --- a/board/sx1/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, <wd@denx.de> -# -# SX1 board with OMAP1510 (ARM925T) cpu -# see http://www.ti.com/ for more information on Texas Insturments -# -# SX1 has 1 bank of 256 MB SDRAM -# Physical Address: -# 1000'0000 to 2000'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved) -# -# we load ourself to 1108'0000 -# -# - -CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/sx1/lowlevel_init.S b/board/sx1/lowlevel_init.S deleted file mode 100644 index c1a811aa8e..0000000000 --- a/board/sx1/lowlevel_init.S +++ /dev/null @@ -1,397 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * - * -- Some bits of code used from rrload's head_OMAP1510.s -- - * Copyright (C) 2002 RidgeRun, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - -#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK)) - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - - /* - * Configure 1510 pins functions to match our board. - */ - ldr r0, REG_PULL_DWN_CTRL_0 - ldr r1, VAL_PULL_DWN_CTRL_0 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_1 - ldr r1, VAL_PULL_DWN_CTRL_1 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_2 - ldr r1, VAL_PULL_DWN_CTRL_2 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_3 - ldr r1, VAL_PULL_DWN_CTRL_3 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_4 - ldr r1, VAL_FUNC_MUX_CTRL_4 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_5 - ldr r1, VAL_FUNC_MUX_CTRL_5 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_6 - ldr r1, VAL_FUNC_MUX_CTRL_6 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_7 - ldr r1, VAL_FUNC_MUX_CTRL_7 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_8 - ldr r1, VAL_FUNC_MUX_CTRL_8 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_9 - ldr r1, VAL_FUNC_MUX_CTRL_9 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_A - ldr r1, VAL_FUNC_MUX_CTRL_A - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_B - ldr r1, VAL_FUNC_MUX_CTRL_B - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_C - ldr r1, VAL_FUNC_MUX_CTRL_C - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_D - ldr r1, VAL_FUNC_MUX_CTRL_D - str r1, [r0] - ldr r0, REG_VOLTAGE_CTRL_0 - ldr r1, VAL_VOLTAGE_CTRL_0 - str r1, [r0] - ldr r0, REG_TEST_DBG_CTRL_0 - ldr r1, VAL_TEST_DBG_CTRL_0 - str r1, [r0] - ldr r0, REG_MOD_CONF_CTRL_0 - ldr r1, VAL_MOD_CONF_CTRL_0 - str r1, [r0] - - /* Move to 1510 mode */ - ldr r0, REG_COMP_MODE_CTRL_0 - ldr r1, VAL_COMP_MODE_CTRL_0 - str r1, [r0] - - /* Set up Traffic Ctlr*/ - ldr r0, REG_TC_IMIF_PRIO - mov r1, #0x0 - str r1, [r0] - ldr r0, REG_TC_EMIFS_PRIO - str r1, [r0] - ldr r0, REG_TC_EMIFF_PRIO - str r1, [r0] - - ldr r0, REG_TC_EMIFS_CONFIG - ldr r1, [r0] - bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */ - bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */ - str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */ - - ldr r0, _GPIO_PIN_CONTROL_REG - mov r1,#0 - orr r1, r1, #0x0001 /* M_PCM_SYNC */ - orr r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - ldr r0, _GPIO_DIR_CONTROL_REG - mov r1,#0 - bic r1, r1, #0x0001 /* M_PCM_SYNC */ - bic r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - ldr r0, _GPIO_DATA_OUTPUT_REG - mov r1,#0 - bic r1, r1, #0x0001 /* M_PCM_SYNC */ - orr r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - /* Setup some clock domains */ - ldr r1, =OMAP1510_CLKS - ldr r0, REG_ARM_IDLECT2 - strh r1, [r0] /* CLKM, Clock domain control. */ - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - /* I supposidly need to enable the dsp clock before switching */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ - bne 1b - - ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */ - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* setup DPLL 1 */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit. */ - beq 2b /* ...loop until bit goes hi. */ -lock_end: - - /* Set memory timings corresponding to the new clock speed */ - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - mov r0, #0x10000000 /* Load physical SDRAM base. */ - mov r1, pc /* Get current execution location. */ - cmp r1, r0 /* Compare. */ - bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 /* value should be checked */ -3: - subs r3, r3, #0x1 /* Decrement count */ - bne 3b - - /* - * Set SDRAM control values. Disable refresh before MRS command. - */ - ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */ - bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */ - orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */ - orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */ - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r3, [r2] /* Store the passed value with AR disabled. */ - - ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */ - ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */ - str r1, [r2] /* Store the passed value.*/ - - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r0, [r2] /* Store the passed value. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 -4: - subs r3, r3, #1 /* Decrement count. */ - bne 4b - -skip_sdram: - - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - ldr r1, VAL_TC_EMIFS_CS2_CONFIG - ldr r0, REG_TC_EMIFS_CS2_CONFIG - str r1, [r0] /* Chip Select 2 */ - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - /* back to arch calling code */ - mov pc, lr - -/* the literal pools origin */ - .ltorg - -/* OMAP configuration registers */ -REG_FUNC_MUX_CTRL_0: /* 32 bits */ - .word 0xfffe1000 -REG_FUNC_MUX_CTRL_1: /* 32 bits */ - .word 0xfffe1004 -REG_FUNC_MUX_CTRL_2: /* 32 bits */ - .word 0xfffe1008 -REG_COMP_MODE_CTRL_0: /* 32 bits */ - .word 0xfffe100c -REG_FUNC_MUX_CTRL_3: /* 32 bits */ - .word 0xfffe1010 -REG_FUNC_MUX_CTRL_4: /* 32 bits */ - .word 0xfffe1014 -REG_FUNC_MUX_CTRL_5: /* 32 bits */ - .word 0xfffe1018 -REG_FUNC_MUX_CTRL_6: /* 32 bits */ - .word 0xfffe101c -REG_FUNC_MUX_CTRL_7: /* 32 bits */ - .word 0xfffe1020 -REG_FUNC_MUX_CTRL_8: /* 32 bits */ - .word 0xfffe1024 -REG_FUNC_MUX_CTRL_9: /* 32 bits */ - .word 0xfffe1028 -REG_FUNC_MUX_CTRL_A: /* 32 bits */ - .word 0xfffe102C -REG_FUNC_MUX_CTRL_B: /* 32 bits */ - .word 0xfffe1030 -REG_FUNC_MUX_CTRL_C: /* 32 bits */ - .word 0xfffe1034 -REG_FUNC_MUX_CTRL_D: /* 32 bits */ - .word 0xfffe1038 -REG_PULL_DWN_CTRL_0: /* 32 bits */ - .word 0xfffe1040 -REG_PULL_DWN_CTRL_1: /* 32 bits */ - .word 0xfffe1044 -REG_PULL_DWN_CTRL_2: /* 32 bits */ - .word 0xfffe1048 -REG_PULL_DWN_CTRL_3: /* 32 bits */ - .word 0xfffe104c -REG_VOLTAGE_CTRL_0: /* 32 bits */ - .word 0xfffe1060 -REG_TEST_DBG_CTRL_0: /* 32 bits */ - .word 0xfffe1070 -REG_MOD_CONF_CTRL_0: /* 32 bits */ - .word 0xfffe1080 -REG_TC_IMIF_PRIO: /* 32 bits */ - .word 0xfffecc00 -REG_TC_EMIFS_PRIO: /* 32 bits */ - .word 0xfffecc04 -REG_TC_EMIFF_PRIO: /* 32 bits */ - .word 0xfffecc08 -REG_TC_EMIFS_CONFIG: /* 32 bits */ - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c -REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */ - .word 0xfffecc20 -REG_TC_EMIFF_MRS: /* 32 bits */ - .word 0xfffecc24 -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 -/* identification code register */ -REG_IDCODE: /* 32 bits */ - .word 0xfffed404 - -/* SX1 specific */ -_GPIO_PIN_CONTROL_REG: - .word GPIO_PIN_CONTROL_REG -_GPIO_DIR_CONTROL_REG: - .word GPIO_DIR_CONTROL_REG -_GPIO_DATA_OUTPUT_REG: - .word GPIO_DATA_OUTPUT_REG - -VAL_COMP_MODE_CTRL_0: - .word 0x0000eaef -VAL_FUNC_MUX_CTRL_4: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_5: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_6: - .word 0x00000001 -VAL_FUNC_MUX_CTRL_7: - .word 0x00001000 -VAL_FUNC_MUX_CTRL_8: - .word 0x00001240 /*[Knoller] Value of Symbian Image Wing B2*/ -VAL_FUNC_MUX_CTRL_9: - .word 0x00201008 -VAL_FUNC_MUX_CTRL_A: - .word 0x00001000 -VAL_FUNC_MUX_CTRL_B: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_C: - .word 0x09008001 /*[Knoller] Value of Symbian Image Wing B2*/ -VAL_FUNC_MUX_CTRL_D: - .word 0x00000000 -VAL_PULL_DWN_CTRL_0: - .word 0xfffeffff -VAL_PULL_DWN_CTRL_1: - .word 0xd1ffffec -VAL_PULL_DWN_CTRL_2: - .word 0xffa80c5b -VAL_PULL_DWN_CTRL_3: - .word 0xffffc0fe -VAL_VOLTAGE_CTRL_0: - .word 0x00000007 -VAL_TEST_DBG_CTRL_0: - /* The OMAP5910 TRM says this register must be 0, but HelenConfRegs - * says to write a 7. Don't know what the right thing is to do, so - * I'm leaving it at 7 since that's what was already here. - */ - .word 0x00000007 -VAL_MOD_CONF_CTRL_0: - .word 0x0da20000 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_ARM_CKCTL: - .word 0x010D - -VAL_DPLL1_CTL: - .word 0x3A33 /*[Hertle] Value of Symbian Image*/ - -VAL_TC_EMIFS_CS1_CONFIG_PRELIM: - .word 0x00001149 - -VAL_TC_EMIFS_CS2_CONFIG_PRELIM: - .word 0x00004158 - -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x00213090 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x00215070 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFF_SDRAM_CONFIG: - .word 0x0105f0b4 /*[Knoller] Value of Symbian Image Wing B2*/ - - -VAL_TC_EMIFF_MRS: - .word 0x00000027 /*[Knoller] Value of Symbian Image Wing B2*/ diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c deleted file mode 100644 index aaef76e713..0000000000 --- a/board/sx1/sx1.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void flash__init (void); -static void ether__init (void); - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* arch number of SX1 Board */ - gd->bd->bi_arch_number = MACH_TYPE_SX1; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - -/* kk - this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - return 0; -} - - -int misc_init_r (void) -{ - /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ - /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ - - /* setup gpio direction to match board (no floats!) */ - /**gdir = 0xCFF9; */ - /**mdir = 0x103F; */ - - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -static void flash__init (void) -{ -#define CS0_CHIP_SELECT_REG 0xfffecc10 -#define CS3_CHIP_SELECT_REG 0xfffecc1c -#define EMIFS_GlB_Config_REG 0xfffecc0c - - unsigned int regval; - - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - regval = regval | 0x0001; /* Turn off write protection for flash devices. */ - if (regval & 0x0002) { - regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ - /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ - /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ - /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ - } - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; -} - - -/****************************** - Routine: - Description: -******************************/ -static void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0800000b - /* take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - */ - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); -} - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index ecb9b6c413..9622a81280 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -45,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR; #define BUZZER 140 #define SPEAKER 141 +#define USB1_PWR 127 +#define USB2_PWR 149 #ifndef CONFIG_FPGA #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" @@ -247,6 +249,12 @@ int board_init(void) gpio_direction_output(BUZZER, 0); gpio_direction_output(SPEAKER, 0); + /* Activate USB power */ + gpio_request(USB1_PWR, "USB1_PWR"); + gpio_request(USB2_PWR, "USB2_PWR"); + gpio_direction_output(USB1_PWR, 1); + gpio_direction_output(USB2_PWR, 1); + return 0; } diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index ca50eef613..67a87a1aaf 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -22,6 +22,7 @@ ifdef CONFIG_SPL_BUILD COBJS := mux.o endif +COBJS += board.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c new file mode 100644 index 0000000000..5d279ecdbc --- /dev/null +++ b/board/ti/am335x/board.c @@ -0,0 +1,376 @@ +/* + * board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +#ifdef CONFIG_SPL_BUILD +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static struct am335x_baseboard_id __attribute__((section (".data"))) header; + +static inline int board_is_bone(void) +{ + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_bone_lt(void) +{ + return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(void) +{ + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); +} + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + sizeof(header))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + /* + * read the eeprom using i2c again, + * but use only a 1 byte address + */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, + (uchar *)&header, sizeof(header))) { + puts("Could not read the EEPROM; something " + "fundamentally wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + printf("Incorrect magic number (0x%x) in EEPROM\n", + header.magic); + return -EINVAL; + } + } + + return 0; +} + +/* UART Defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | + (MT47H128M16RT25E_RD_DQS<<20) | + (MT47H128M16RT25E_RD_DQS<<10) | + (MT47H128M16RT25E_RD_DQS<<0)), + .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | + (MT47H128M16RT25E_WR_DQS<<20) | + (MT47H128M16RT25E_WR_DQS<<10) | + (MT47H128M16RT25E_WR_DQS<<0)), + .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | + (MT47H128M16RT25E_PHY_WRLVL<<20) | + (MT47H128M16RT25E_PHY_WRLVL<<10) | + (MT47H128M16RT25E_PHY_WRLVL<<0)), + .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | + (MT47H128M16RT25E_PHY_GATELVL<<20) | + (MT47H128M16RT25E_PHY_GATELVL<<10) | + (MT47H128M16RT25E_PHY_GATELVL<<0)), + .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | + (MT47H128M16RT25E_PHY_FIFO_WE<<20) | + (MT47H128M16RT25E_PHY_FIFO_WE<<10) | + (MT47H128M16RT25E_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | + (MT47H128M16RT25E_PHY_WR_DATA<<20) | + (MT47H128M16RT25E_PHY_WR_DATA<<10) | + (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = MT47H128M16RT25E_RATIO, + .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd1csratio = MT47H128M16RT25E_RATIO, + .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd2csratio = MT47H128M16RT25E_RATIO, + .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, +}; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41J128MJT125_RD_DQS, + .datawdsratio0 = MT41J128MJT125_WR_DQS, + .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, + .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41J128MJT125_RATIO, + .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd1csratio = MT41J128MJT125_RATIO, + .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd2csratio = MT41J128MJT125_RATIO, + .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41J128MJT125_EMIF_SDCFG, + .ref_ctrl = MT41J128MJT125_EMIF_SDREF, + .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, + .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, + .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, + .zq_config = MT41J128MJT125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, +}; +#endif + +/* + * early system init of muxing and clocks. + */ +void s_init(void) +{ + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + +#ifdef CONFIG_SPL_BUILD + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* UART softreset */ + u32 regVal; + + enable_uart0_pin_mux(); + + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_RESET; + writel(regVal, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_SMART_IDLE_EN; + writel(regVal, &uart_base->uartsyscfg); + + gd = &gdata; + + preloader_console_init(); + + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(&header); + if (board_is_evm_sk()) { + /* + * EVM SK 1.2A and later use gpio0_7 to enable DDR3. + * This is safe enough to do on older revs. + */ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + } + + if (board_is_evm_sk() || board_is_bone_lt()) + config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + else + config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + debug("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return -1; + } + + if (board_is_bone() || board_is_bone_lt()) { + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_RGMII; + } + + return cpsw_register(&cpsw_data); +} +#endif diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h new file mode 100644 index 0000000000..7985ab2c14 --- /dev/null +++ b/board/ti/am335x/board.h @@ -0,0 +1,49 @@ +/* + * board.h + * + * TI AM335x boards information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * TI AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); +#endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 80becd5c7a..29929791fc 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -16,242 +16,10 @@ #include <common.h> #include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> +#include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> - -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); - -/* PAD Control Fields */ -#define SLEWCTRL (0x1 << 6) -#define RXACTIVE (0x1 << 5) -#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int gpmc_ad0; - int gpmc_ad1; - int gpmc_ad2; - int gpmc_ad3; - int gpmc_ad4; - int gpmc_ad5; - int gpmc_ad6; - int gpmc_ad7; - int gpmc_ad8; - int gpmc_ad9; - int gpmc_ad10; - int gpmc_ad11; - int gpmc_ad12; - int gpmc_ad13; - int gpmc_ad14; - int gpmc_ad15; - int gpmc_a0; - int gpmc_a1; - int gpmc_a2; - int gpmc_a3; - int gpmc_a4; - int gpmc_a5; - int gpmc_a6; - int gpmc_a7; - int gpmc_a8; - int gpmc_a9; - int gpmc_a10; - int gpmc_a11; - int gpmc_wait0; - int gpmc_wpn; - int gpmc_be1n; - int gpmc_csn0; - int gpmc_csn1; - int gpmc_csn2; - int gpmc_csn3; - int gpmc_clk; - int gpmc_advn_ale; - int gpmc_oen_ren; - int gpmc_wen; - int gpmc_be0n_cle; - int lcd_data0; - int lcd_data1; - int lcd_data2; - int lcd_data3; - int lcd_data4; - int lcd_data5; - int lcd_data6; - int lcd_data7; - int lcd_data8; - int lcd_data9; - int lcd_data10; - int lcd_data11; - int lcd_data12; - int lcd_data13; - int lcd_data14; - int lcd_data15; - int lcd_vsync; - int lcd_hsync; - int lcd_pclk; - int lcd_ac_bias_en; - int mmc0_dat3; - int mmc0_dat2; - int mmc0_dat1; - int mmc0_dat0; - int mmc0_clk; - int mmc0_cmd; - int mii1_col; - int mii1_crs; - int mii1_rxerr; - int mii1_txen; - int mii1_rxdv; - int mii1_txd3; - int mii1_txd2; - int mii1_txd1; - int mii1_txd0; - int mii1_txclk; - int mii1_rxclk; - int mii1_rxd3; - int mii1_rxd2; - int mii1_rxd1; - int mii1_rxd0; - int rmii1_refclk; - int mdio_data; - int mdio_clk; - int spi0_sclk; - int spi0_d0; - int spi0_d1; - int spi0_cs0; - int spi0_cs1; - int ecap0_in_pwm0_out; - int uart0_ctsn; - int uart0_rtsn; - int uart0_rxd; - int uart0_txd; - int uart1_ctsn; - int uart1_rtsn; - int uart1_rxd; - int uart1_txd; - int i2c0_sda; - int i2c0_scl; - int mcasp0_aclkx; - int mcasp0_fsx; - int mcasp0_axr0; - int mcasp0_ahclkr; - int mcasp0_aclkr; - int mcasp0_fsr; - int mcasp0_axr1; - int mcasp0_ahclkx; - int xdma_event_intr0; - int xdma_event_intr1; - int nresetin_out; - int porz; - int nnmi; - int osc0_in; - int osc0_out; - int rsvd1; - int tms; - int tdi; - int tdo; - int tck; - int ntrst; - int emu0; - int emu1; - int osc1_in; - int osc1_out; - int pmic_power_en; - int rtc_porz; - int rsvd2; - int ext_wakeup; - int enz_kaldo_1p8v; - int usb0_dm; - int usb0_dp; - int usb0_ce; - int usb0_id; - int usb0_vbus; - int usb0_drvvbus; - int usb1_dm; - int usb1_dp; - int usb1_ce; - int usb1_id; - int usb1_vbus; - int usb1_drvvbus; - int ddr_resetn; - int ddr_csn0; - int ddr_cke; - int ddr_ck; - int ddr_nck; - int ddr_casn; - int ddr_rasn; - int ddr_wen; - int ddr_ba0; - int ddr_ba1; - int ddr_ba2; - int ddr_a0; - int ddr_a1; - int ddr_a2; - int ddr_a3; - int ddr_a4; - int ddr_a5; - int ddr_a6; - int ddr_a7; - int ddr_a8; - int ddr_a9; - int ddr_a10; - int ddr_a11; - int ddr_a12; - int ddr_a13; - int ddr_a14; - int ddr_a15; - int ddr_odt; - int ddr_d0; - int ddr_d1; - int ddr_d2; - int ddr_d3; - int ddr_d4; - int ddr_d5; - int ddr_d6; - int ddr_d7; - int ddr_d8; - int ddr_d9; - int ddr_d10; - int ddr_d11; - int ddr_d12; - int ddr_d13; - int ddr_d14; - int ddr_d15; - int ddr_dqm0; - int ddr_dqm1; - int ddr_dqs0; - int ddr_dqsn0; - int ddr_dqs1; - int ddr_dqsn1; - int ddr_vref; - int ddr_vtp; - int ddr_strben0; - int ddr_strben1; - int ain7; - int ain6; - int ain5; - int ain4; - int ain3; - int ain2; - int ain1; - int ain0; - int vrefp; - int vrefn; -}; - -struct module_pin_mux { - short reg_offset; - unsigned char val; -}; - -/* Pad control register offset */ -#define PAD_CTRL_BASE 0x800 -#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ - (PAD_CTRL_BASE))->x) +#include "board.h" static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ @@ -362,20 +130,6 @@ static struct module_pin_mux mii1_pin_mux[] = { {-1}, }; -/* - * Configure the pin mux for the module - */ -static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) -{ - int i; - - if (!mod_pin_mux) - return; - - for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) - MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); -} - void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d0f47164d7..ed779e245f 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,7 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= -TQM85xx powerpc MPC85xx - - Stefan Roese <sr@denx.de> +SX1 arm arm925t - - +TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> tb0229 mips mips32 3f3110d 2011-12-12 rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index 9feb2e55a3..c6a8ab0521 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -125,63 +125,59 @@ III) Analysis of in-tree drivers ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 17) serial_lpc2292.c + 17) serial_max3100.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 18) serial_max3100.c - -------------------- - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - - 19) serial_mxc.c + 18) serial_mxc.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 20) serial_netarm.c + 19) serial_netarm.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 21) serial_pl01x.c + 20) serial_pl01x.c ------------------ No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this driver in fact contains two drivers in total. - 22) serial_pxa.c + 21) serial_pxa.c ---------------- This driver is a bit complicated, but due to clean support for CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the conversion process. - 23) serial_s3c24x0.c + 22) serial_s3c24x0.c -------------------- This driver, being quite ad-hoc might need some work to bring back to shape. - 24) serial_s3c44b0.c + 23) serial_s3c44b0.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 25) serial_s5p.c + 24) serial_s5p.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 26) serial_sa1100.c + 25) serial_sa1100.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 27) serial_sh.c + 26) serial_sh.c --------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 28) serial_xuartlite.c + 27) serial_xuartlite.c ---------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 29) usbtty.c + 28) usbtty.c ------------ This driver seems very complicated and entangled with USB framework. The conversion might be complicated here. - 30) arch/powerpc/cpu/mpc512x/serial.c + 29) arch/powerpc/cpu/mpc512x/serial.c ------------------------------------- This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to proper place. diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 36c6114e3c..1595c0714a 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -41,9 +41,6 @@ #ifdef CONFIG_IXP425 /* only valid for IXP425 */ #include <asm/arch/ixp425.h> #endif -#ifdef CONFIG_LPC2292 -#include <asm/arch/hardware.h> -#endif #if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866) #include <asm/io.h> #endif diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 4968c5e491..67b2dbe8d4 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -87,6 +87,11 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) | MMCI_BF(BLKLEN, blklen) | MMCI_BIT(RDPROOF) | MMCI_BIT(WRPROOF)), &mci->mr); + /* + * On some new platforms BLKLEN in mci->mr is ignored. + * Should use the BLKLEN in the block register. + */ + writel(MMCI_BF(BLKLEN, blklen), &mci->blkr); initialized = 1; } @@ -183,6 +188,12 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) /* Figure out the transfer arguments */ cmdr = mci_encode_cmd(cmd, data, &error_flags); + /* For multi blocks read/write, set the block register */ + if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) + || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) + writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len), + &mci->blkr); + /* Send the command */ writel(cmd->cmdarg, &mci->argr); writel(cmdr, &mci->cmdr); @@ -310,8 +321,8 @@ static int mci_init(struct mmc *mmc) writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */ writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */ - /* Initial Time-outs */ - writel(0x5f, &mci->dtor); + /* This delay can be optimized, but stick with max value */ + writel(0x7f, &mci->dtor); /* Disable Interrupts */ writel(~0UL, &mci->idr); diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e4abac7c8f..786a6567a5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -59,7 +59,6 @@ COBJS-$(CONFIG_MVGBE) += mvgbe.o COBJS-$(CONFIG_NATSEMI) += natsemi.o COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o -COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o COBJS-$(CONFIG_NETCONSOLE) += netconsole.o COBJS-$(CONFIG_NS8382X) += ns8382x.o COBJS-$(CONFIG_PCNET) += pcnet.o diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c deleted file mode 100644 index 325f16c3a8..0000000000 --- a/drivers/net/netarm_eth.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * Copyright (C) 2004 IMMS gGmbH <www.imms.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * author(s): Thomas Elste, <info@elste.org> - * (some parts derived from uCLinux Netarm Ethernet Driver) - */ - - -#include <common.h> -#include <command.h> -#include <net.h> -#include "netarm_eth.h" -#include <asm/arch/netarm_registers.h> - -static int na_mii_poll_busy (void); - -static void na_get_mac_addr (void) -{ - unsigned short p[3]; - char *m_addr; - char ethaddr[20]; - - m_addr = (char *) p; - - p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1); - p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2); - p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3); - - sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - m_addr[0], m_addr[1], - m_addr[2], m_addr[3], m_addr[4], m_addr[5]); - - printf ("HW-MAC Address: %s\n", ethaddr); - - /* set env, todo: check if already an adress is set */ - setenv ("ethaddr", ethaddr); -} - -static void na_mii_write (int reg, int value) -{ - int mii_addr; - - /* Select register */ - mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg; - SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr); - /* Write value */ - SET_EADDR (NETARM_ETH_MII_WRITE, value); - na_mii_poll_busy (); -} - -static unsigned int na_mii_read (int reg) -{ - int mii_addr, val; - - /* Select register */ - mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg; - SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr); - /* do one management cycle */ - SET_EADDR (NETARM_ETH_MII_CMD, - GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT); - na_mii_poll_busy (); - /* Return read value */ - val = GET_EADDR (NETARM_ETH_MII_READ); - return val; -} - -static int na_mii_poll_busy (void) -{ - ulong start; - /* arm simple, non interrupt dependent timer */ - start = get_timer(0)); - while (get_timer(start) < NA_MII_POLL_BUSY_DELAY) { - if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) { - return 1; - } - } - printf ("na_mii_busy timeout\n"); - return (0); -} - -static int na_mii_identify_phy (void) -{ - int id_reg_a = 0; - - /* get phy id register */ - id_reg_a = na_mii_read (MII_PHY_ID); - - if (id_reg_a == 0x0043) { - /* This must be an Enable or a Lucent LU3X31 PHY chip */ - return 1; - } else if (id_reg_a == 0x0013) { - /* it is an Intel LXT971A */ - return 1; - } - return (0); -} - -static int na_mii_negotiate (void) -{ - int i = 0; - - /* Enable auto-negotiation */ - na_mii_write (MII_PHY_AUTONEGADV, 0x01e1); - /* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */ - /* Restart auto-negotiation */ - na_mii_write (MII_PHY_CONTROL, 0x1200); - - /* status register is 0xffff after setting the autoneg restart bit */ - while (na_mii_read (MII_PHY_STATUS) == 0xffff) { - i++; - } - - /* na_mii_read uses the timer already, so we can't use it again for - timeout checking. - Instead we just try some times. - */ - for (i = 0; i < 40000; i++) { - if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) { - return 0; - } - } - /* - printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS)); - */ - return (1); -} - -static unsigned int na_mii_check_speed (void) -{ - unsigned int status; - - /* Read Status register */ - status = na_mii_read (MII_PHY_STATUS); - /* Check link status. If 0, default to 100 Mbps. */ - if ((status & 0x0004) == 0) { - printf ("*Warning* no link detected, set default speed to 100Mbs\n"); - return 1; - } else { - if ((na_mii_read (17) & 0x4000) != 0) { - printf ("100Mbs link detected\n"); - return 1; - } else { - printf ("10Mbs link detected\n"); - return 0; - } - } - return 0; -} - -static int reset_eth (void) -{ - int pt; - ulong start; - - na_get_mac_addr (); - pt = na_mii_identify_phy (); - - /* reset the phy */ - na_mii_write (MII_PHY_CONTROL, 0x8000); - start = get_timer(0); - while (get_timer(start) < NA_MII_NEGOTIATE_DELAY) { - if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) { - break; - } - } - if (get_timer(start) >= NA_MII_NEGOTIATE_DELAY) - printf ("phy reset timeout\n"); - - /* set the PCS reg */ - SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M | - NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR); - - na_mii_negotiate (); - na_mii_check_speed (); - - /* Delay 10 millisecond. (Maybe this should be 1 second.) */ - udelay (10000); - - /* Turn receive on. - Enable statistics register autozero on read. - Do not insert MAC address on transmit. - Do not enable special test modes. */ - SET_EADDR (NETARM_ETH_STL_CFG, - (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN)); - - /* Set the inter-packet gap delay to 0.96us for MII. - The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG - Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG - Gap Timer Register should be set to 0x00000C12 for the MII PHY. */ - SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15); - SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12); - - /* Add CRC to end of packets. - Pad packets to minimum length of 64 bytes. - Allow unlimited length transmit packets. - Receive all broadcast packets. - NOTE: Multicast addressing is NOT enabled here currently. */ - SET_EADDR (NETARM_ETH_MAC_CFG, - (NETARM_ETH_MACC_CRCEN | - NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN)); - SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD); - - /* enable fifos */ - SET_EADDR (NETARM_ETH_GEN_CTRL, - (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX)); - - return (0); -} - - -extern int eth_init (bd_t * bd) -{ - reset_eth (); - return 0; -} - -extern void eth_halt (void) -{ - SET_EADDR (NETARM_ETH_GEN_CTRL, 0); -} - -/* Get a data block via Ethernet */ -extern int eth_rx (void) -{ - int i; - unsigned short rxlen; - unsigned int *addr; - unsigned int rxstatus, lastrxlen; - char *pa; - - /* RXBR is 1, data block was received */ - if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0) - return 0; - - /* get status register and the length of received block */ - rxstatus = GET_EADDR (NETARM_ETH_RX_STAT); - rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16; - - if (rxlen == 0) - return 0; - - /* clear RXBR to make fifo available */ - SET_EADDR (NETARM_ETH_GEN_STAT, - GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR); - - /* clear TXBC to make fifo available */ - /* According to NETARM50 data manual you just have to clear - RXBR but that has no effect. Only after clearing TXBC the - Fifo becomes readable. */ - SET_EADDR (NETARM_ETH_GEN_STAT, - GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC); - - addr = (unsigned int *) NetRxPackets[0]; - pa = (char *) NetRxPackets[0]; - - /* read the fifo */ - for (i = 0; i < rxlen / 4; i++) { - *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1); - addr++; - } - - if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) { - /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */ - lastrxlen = - (GET_EADDR (NETARM_ETH_GEN_STAT) & - NETARM_ETH_GST_RXFDB) >> 28; - *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1); - switch (lastrxlen) { - case 1: - *addr &= 0xff000000; - break; - case 2: - *addr &= 0xffff0000; - break; - case 3: - *addr &= 0xffffff00; - break; - } - } - - /* Pass the packet up to the protocol layers. */ - NetReceive (NetRxPackets[0], rxlen); - - return rxlen; -} - -/* Send a data block via Ethernet. */ -extern int eth_send(void *packet, int length) -{ - int i, length32; - char *pa; - unsigned int *pa32, lastp = 0, rest; - - pa = (char *) packet; - pa32 = (unsigned int *) packet; - length32 = length / 4; - rest = length % 4; - - /* make sure there's no garbage in the last word */ - switch (rest) { - case 0: - lastp = pa32[length32]; - length32--; - break; - case 1: - lastp = pa32[length32] & 0x000000ff; - break; - case 2: - lastp = pa32[length32] & 0x0000ffff; - break; - case 3: - lastp = pa32[length32] & 0x00ffffff; - break; - } - - /* write to the fifo */ - for (i = 0; i < length32; i++) - SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]); - - /* the last word is written to an extra register, this - starts the transmission */ - SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp); - - /* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission - went fine. But we can't use the timer for a timeout loop because - of it is used already in upper layers. So we just try some times. */ - i = 0; - while (i < 50000) { - if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK) - == NETARM_ETH_TXSTAT_TXOK) - return 0; - i++; - } - - printf ("eth_send timeout\n"); - return 1; -} diff --git a/drivers/net/netarm_eth.h b/drivers/net/netarm_eth.h deleted file mode 100644 index 8edab82da3..0000000000 --- a/drivers/net/netarm_eth.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2003 IMMS gGmbH <www.imms.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * author(s): Thomas Elste, <info@elste.org> - */ - -#include <asm/types.h> -#include <config.h> - -#ifdef CONFIG_DRIVER_NETARMETH - -#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val -#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE)) - -#define NA_MII_POLL_BUSY_DELAY 900 - -/* MII negotiation timeout value - 500 jiffies = 5 seconds */ -#define NA_MII_NEGOTIATE_DELAY 30 - -/* Registers in the physical layer chip */ -#define MII_PHY_CONTROL 0 -#define MII_PHY_STATUS 1 -#define MII_PHY_ID 2 -#define MII_PHY_AUTONEGADV 4 - -#endif /* CONFIG_DRIVER_NETARMETH */ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 920ce6910e..5e8b64873d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -36,18 +36,14 @@ COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o -COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o -COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o -COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-$(CONFIG_MXC_UART) += serial_mxc.o -COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c deleted file mode 100644 index c460229e05..0000000000 --- a/drivers/serial/s3c4510b_uart.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * MODULE: $Id:$ - * Description: UART/Serial interface for Samsung S3C4510B SoC - * Runtime Env: ARM7TDMI - * Change History: - * 03-02-04 Create (Curt Brune) curt@cucy.com - * - */ - -#include <common.h> - -#include <asm/hardware.h> -#include "s3c4510b_uart.h" - -DECLARE_GLOBAL_DATA_PTR; - -static UART *uart; - -/* flush serial input queue. returns 0 on success or negative error - * number otherwise - */ -static int serial_flush_input(void) -{ - volatile u32 tmp; - - /* keep on reading as long as the receiver is not empty */ - while( uart->m_stat.bf.rxReady) { - tmp = uart->m_rx; - } - - return 0; -} - - -/* flush output queue. returns 0 on success or negative error number - * otherwise - */ -static int serial_flush_output(void) -{ - /* wait until the transmitter is no longer busy */ - while( !uart->m_stat.bf.txBufEmpty); - - return 0; -} - - -static void s3c4510b_serial_setbrg(void) -{ - UART_LINE_CTRL ulctrl; - UART_CTRL uctrl; - UART_BAUD_DIV ubd; - - serial_flush_output(); - serial_flush_input(); - - /* control register */ - uctrl.ui = 0x0; - uctrl.bf.rxMode = 0x1; - uctrl.bf.rxIrq = 0x0; - uctrl.bf.txMode = 0x1; - uctrl.bf.DSR = 0x0; - uctrl.bf.sendBreak = 0x0; - uctrl.bf.loopBack = 0x0; - uart->m_ctrl.ui = uctrl.ui; - - /* line control register */ - ulctrl.ui = 0x0; - ulctrl.bf.wordLen = 0x3; /* 8 bit data */ - ulctrl.bf.nStop = 0x0; /* 1 stop bit */ - ulctrl.bf.parity = 0x0; /* no parity */ - ulctrl.bf.clk = 0x0; /* internal clock */ - ulctrl.bf.infra_red = 0x0; /* no infra_red */ - uart->m_lineCtrl.ui = ulctrl.ui; - - ubd.ui = 0x0; - - /* see table on page 10-15 in SAMSUNG S3C4510B manual */ - /* get correct divisor */ - switch(gd->baudrate) { - case 1200: ubd.bf.cnt0 = 1301; break; - case 2400: ubd.bf.cnt0 = 650; break; - case 4800: ubd.bf.cnt0 = 324; break; - case 9600: ubd.bf.cnt0 = 162; break; - case 19200: ubd.bf.cnt0 = 80; break; - case 38400: ubd.bf.cnt0 = 40; break; - case 57600: ubd.bf.cnt0 = 26; break; - case 115200: ubd.bf.cnt0 = 13; break; - } - - uart->m_baudDiv.ui = ubd.ui; - uart->m_baudCnt = 0x0; - uart->m_baudClk = 0x0; - -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int s3c4510b_serial_init(void) -{ - -#if CONFIG_SERIAL1 == 1 - uart = (UART *)UART0_BASE; -#elif CONFIG_SERIAL1 == 2 - uart = (UART *)UART1_BASE; -#else -#error CONFIG_SERIAL1 not equal to 1 or 2 -#endif - - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void s3c4510_serial_putc(const char c) -{ - /* wait for room in the transmit FIFO */ - while( !uart->m_stat.bf.txBufEmpty); - - uart->m_tx = c; - - /* - to be polite with serial console add a line feed - to the carriage return character - */ - if (c=='\n') - serial_putc('\r'); -} - -/* - * Test if an input byte is ready from the serial port. Returns non-zero on - * success, 0 otherwise. - */ -static int s3c4510b_serial_tstc(void) -{ - return uart->m_stat.bf.rxReady; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int s3c4510b_serial_getc(void) -{ - int rv; - - for(;;) { - rv = serial_tstc(); - - if (rv) { - return uart->m_rx & 0xFF; - } - } -} - -static void s3c4510b_serial_puts(const char *s) -{ - default_serial_puts(s); - - /* busy wait for tx complete */ - while (!uart->m_stat.bf.txComplete); - - /* clear break */ - uart->m_ctrl.bf.sendBreak = 0; - -} - -static struct serial_device s3c4510b_serial_drv = { - .name = "s3c4510b_serial", - .start = s3c4510b_serial_init, - .stop = NULL, - .setbrg = s3c4510b_serial_setbrg, - .putc = s3c4510b_serial_putc, - .puts = s3c4510b_serial_puts, - .getc = s3c4510b_serial_getc, - .tstc = s3c4510b_serial_tstc, -}; - -void s3c4510b_serial_initialize(void) -{ - serial_register(&s3c4510b_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &s3c4510b_serial_drv; -} diff --git a/drivers/serial/s3c4510b_uart.h b/drivers/serial/s3c4510b_uart.h deleted file mode 100644 index b06c76d84a..0000000000 --- a/drivers/serial/s3c4510b_uart.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef __UART_H -#define __UART_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Description: S3C4510B UART register layout - */ - -/* UART LINE CONTROL register */ -typedef struct __BF_UART_LINE_CTRL { - u32 wordLen: 2; - u32 nStop: 1; - u32 parity: 3; - u32 clk: 1; - u32 infra_red: 1; - u32 unused:24; -} BF_UART_LINE_CTRL; - -typedef union _UART_LINE_CTRL { - u32 ui; - BF_UART_LINE_CTRL bf; -} UART_LINE_CTRL; - -/* UART CONTROL register */ -typedef struct __BF_UART_CTRL { - u32 rxMode: 2; - u32 rxIrq: 1; - u32 txMode: 2; - u32 DSR: 1; - u32 sendBreak: 1; - u32 loopBack: 1; - u32 unused:24; -} BF_UART_CTRL; - -typedef union _UART_CTRL { - u32 ui; - BF_UART_CTRL bf; -} UART_CTRL; - -/* UART STATUS register */ -typedef struct __BF_UART_STAT { - u32 overrun: 1; - u32 parity: 1; - u32 frame: 1; - u32 breakIrq: 1; - u32 DTR: 1; - u32 rxReady: 1; - u32 txBufEmpty: 1; - u32 txComplete: 1; - u32 unused:24; -} BF_UART_STAT; - -typedef union _UART_STAT { - u32 ui; - BF_UART_STAT bf; -} UART_STAT; - -/* UART BAUD_DIV register */ -typedef struct __BF_UART_BAUD_DIV { - u32 cnt1: 4; - u32 cnt0:12; - u32 unused:16; -} BF_UART_BAUD_DIV; - -typedef union _UART_BAUD_DIV { - u32 ui; - BF_UART_BAUD_DIV bf; -} UART_BAUD_DIV; - -/* UART register block */ -typedef struct __UART { - volatile UART_LINE_CTRL m_lineCtrl; - volatile UART_CTRL m_ctrl; - volatile UART_STAT m_stat; - volatile u32 m_tx; - volatile u32 m_rx; - volatile UART_BAUD_DIV m_baudDiv; - volatile u32 m_baudCnt; - volatile u32 m_baudClk; -} UART; - -#define NL 0x0A -#define CR 0x0D -#define BSP 0x08 -#define ESC 0x1B -#define CTRLZ 0x1A -#define RUBOUT 0x7F - -#endif diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index e0886d562e..f5f43a6ddc 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -96,7 +96,6 @@ serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); -serial_initfunc(s3c4510b_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); serial_initfunc(clps7111_serial_initialize); @@ -104,10 +103,8 @@ serial_initfunc(imx_serial_initialize); serial_initfunc(ixp_serial_initialize); serial_initfunc(ks8695_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); -serial_initfunc(lpc2292_serial_initialize); serial_initfunc(max3100_serial_initialize); serial_initfunc(mxc_serial_initialize); -serial_initfunc(netarm_serial_initialize); serial_initfunc(pl01x_serial_initialize); serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); @@ -194,7 +191,6 @@ void serial_initialize(void) mcf_serial_initialize(); ns9750_serial_initialize(); oc_serial_initialize(); - s3c4510b_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); clps7111_serial_initialize(); @@ -202,10 +198,8 @@ void serial_initialize(void) ixp_serial_initialize(); ks8695_serial_initialize(); lh7a40x_serial_initialize(); - lpc2292_serial_initialize(); max3100_serial_initialize(); mxc_serial_initialize(); - netarm_serial_initialize(); pl01x_serial_initialize(); s3c44b0_serial_initialize(); sa1100_serial_initialize(); diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c deleted file mode 100644 index c292ed8756..0000000000 --- a/drivers/serial/serial_clps7111.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <clps7111.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void clps7111_serial_setbrg(void) -{ - unsigned int reg = 0; - - switch (gd->baudrate) { - case 1200: reg = 191; break; - case 9600: reg = 23; break; - case 19200: reg = 11; break; - case 38400: reg = 5; break; - case 57600: reg = 3; break; - case 115200: reg = 1; break; - default: hang (); break; - } - - /* init serial serial 1,2 */ - IO_SYSCON1 = SYSCON1_UART1EN; - IO_SYSCON2 = SYSCON2_UART2EN; - - reg |= UBRLCR_WRDLEN8; - - IO_UBRLCR1 = reg; - IO_UBRLCR2 = reg; -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int clps7111_serial_init(void) -{ - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void clps7111_serial_putc(const char c) -{ - int tmo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - tmo = get_timer (0) + 1 * CONFIG_SYS_HZ; - while (IO_SYSFLG1 & SYSFLG1_UTXFF) - if (get_timer (0) > tmo) - break; - - IO_UARTDR1 = c; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_tstc(void) -{ - return !(IO_SYSFLG1 & SYSFLG1_URXFE); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_getc(void) -{ - while (IO_SYSFLG1 & SYSFLG1_URXFE); - - return IO_UARTDR1 & 0xff; -} - -static struct serial_device clps7111_serial_drv = { - .name = "clps7111_serial", - .start = clps7111_serial_init, - .stop = NULL, - .setbrg = clps7111_serial_setbrg, - .putc = clps7111_serial_putc, - .puts = default_serial_puts, - .getc = clps7111_serial_getc, - .tstc = clps7111_serial_tstc, -}; - -void clps7111_serial_initialize(void) -{ - serial_register(&clps7111_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &clps7111_serial_drv; -} diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c deleted file mode 100644 index 8abc476713..0000000000 --- a/drivers/serial/serial_lpc2292.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void lpc2292_serial_setbrg(void) -{ - unsigned short divisor = 0; - - switch (gd->baudrate) { - case 1200: divisor = 3072; break; - case 9600: divisor = 384; break; - case 19200: divisor = 192; break; - case 38400: divisor = 96; break; - case 57600: divisor = 64; break; - case 115200: divisor = 32; break; - default: hang (); break; - } - - /* init serial UART0 */ - PUT8(U0LCR, 0); - PUT8(U0IER, 0); - PUT8(U0LCR, 0x80); /* DLAB=1 */ - PUT8(U0DLL, (unsigned char)(divisor & 0x00FF)); - PUT8(U0DLM, (unsigned char)(divisor >> 8)); - PUT8(U0LCR, 0x03); /* 8N1, DLAB=0 */ - PUT8(U0FCR, 1); /* Enable RX and TX FIFOs */ -} - -static int lpc2292_serial_init(void) -{ - unsigned long pinsel0; - - serial_setbrg (); - - pinsel0 = GET32(PINSEL0); - pinsel0 &= ~(0x00000003); - pinsel0 |= 5; - PUT32(PINSEL0, pinsel0); - - return (0); -} - -static void lpc2292_serial_putc(const char c) -{ - if (c == '\n') - { - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, '\r'); - } - - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, c); -} - -static int lpc2292_serial_getc(void) -{ - while((GET8(U0LSR) & 1) == 0); - return GET8(U0RBR); -} - -/* Test if there is a byte to read */ -static int lpc2292_serial_tstc(void) -{ - return (GET8(U0LSR) & 1); -} - -static struct serial_device lpc2292_serial_drv = { - .name = "lpc2292_serial", - .start = lpc2292_serial_init, - .stop = NULL, - .setbrg = lpc2292_serial_setbrg, - .putc = lpc2292_serial_putc, - .puts = default_serial_puts, - .getc = lpc2292_serial_getc, - .tstc = lpc2292_serial_tstc, -}; - -void lpc2292_serial_initialize(void) -{ - serial_register(&lpc2292_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &lpc2292_serial_drv; -} diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c deleted file mode 100644 index 44d7c500c7..0000000000 --- a/drivers/serial/serial_netarm.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Serial Port stuff - taken from Linux - * - * (C) Copyright 2002 - * MAZeT GmbH <www.mazet.de> - * Stephan Linz <linz@mazet.de>, <linz@li-pro.net> - * - * (c) 2004 - * IMMS gGmbH <www.imms.de> - * Thomas Elste <info@elste.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) -#if !defined(CONFIG_NETARM_NS7520) -#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) -#else -#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC)) -#endif - -/* wait until transmitter is ready for another character */ -#define TXWAITRDY(registers) \ -{ \ - ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \ - while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \ - if (get_timer(0) > tmo) \ - break; \ - } \ -} - - -volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0); -volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1); - -extern void _netarm_led_FAIL1(void); - -/* - * Setup both serial i/f with given baudrate - */ -static void netarm_serial_setbrg(void) -{ - /* set 0 ... make sure pins are configured for serial */ -#if !defined(CONFIG_NETARM_NS7520) - PORTA = PORTB = - NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#else - PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); - PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#endif - - /* first turn em off */ - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0; - - /* clear match register, we don't need it */ - serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0; - - /* setup bit rate generator and rx buffer gap timer (1 byte only) */ - if ((gd->baudrate >= MIN_BAUD_RATE) - && (gd->baudrate <= MAX_BAUD_RATE)) { - serial_reg_ch1->bitrate = serial_reg_ch2->bitrate = - NETARM_SER_BR_X16 (gd->baudrate); - serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer = - 0; - serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer = - NETARM_SER_RXGAP (gd->baudrate); - } else { - hang (); - } - - /* setup port mode */ - serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b = - ( NETARM_SER_CTLB_RCGT_EN | - NETARM_SER_CTLB_UART_MODE); - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = - ( NETARM_SER_CTLA_ENABLE | - NETARM_SER_CTLA_P_NONE | - /* see errata */ - NETARM_SER_CTLA_2STOP | - NETARM_SER_CTLA_8BITS | - NETARM_SER_CTLA_DTR_EN | - NETARM_SER_CTLA_RTS_EN); -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int netarm_serial_init(void) -{ - serial_setbrg (); - return 0; -} - - -/* - * Output a single byte to the serial port. - */ -static void netarm_serial_putc(const char c) -{ - volatile unsigned char *fifo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo); - TXWAITRDY (serial_reg_ch1); - *fifo = c; -} - -/* - * Test of a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_tstc(void) -{ - return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_getc(void) -{ - unsigned int ch_uint; - volatile unsigned int *fifo; - volatile unsigned char *fifo_char = NULL; - int buf_count = 0; - - while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY)) - /* NOP */ ; - - fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo); - fifo_char = (unsigned char *) &ch_uint; - ch_uint = *fifo; - - buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a); - switch (buf_count) { - case NETARM_SER_STATA_RXFDB_4BYTES: - buf_count = 4; - break; - case NETARM_SER_STATA_RXFDB_3BYTES: - buf_count = 3; - break; - case NETARM_SER_STATA_RXFDB_2BYTES: - buf_count = 2; - break; - case NETARM_SER_STATA_RXFDB_1BYTES: - buf_count = 1; - break; - default: - /* panic, be never here */ - break; - } - - serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED; - - return ch_uint & 0xff; -} - -static struct serial_device netarm_serial_drv = { - .name = "netarm_serial", - .start = netarm_serial_init, - .stop = NULL, - .setbrg = netarm_serial_setbrg, - .putc = netarm_serial_putc, - .puts = default_serial_puts, - .getc = netarm_serial_getc, - .tstc = netarm_serial_tstc, -}; - -void netarm_serial_initialize(void) -{ - serial_register(&netarm_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &netarm_serial_drv; -} diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index e40a632caa..6791a7e0ec 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -173,14 +173,13 @@ int spi_claim_bus(struct spi_slave *slave) /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS * REVISIT: this controller could support SPI_3WIRE mode. */ -#ifdef CONFIG_AM33XX +#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED /* - * The reference design on AM33xx has D0 and D1 wired up opposite - * of how it has been done on previous platforms. We assume that - * custom hardware will also follow this convention. + * Some boards have D0 wired as MOSI / D1 as MISO instead of + * The normal D0 as MISO / D1 as MOSI. */ - conf &= OMAP3_MCSPI_CHCONF_DPE0; - conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); + conf &= ~OMAP3_MCSPI_CHCONF_DPE0; + conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1; #else conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); conf |= OMAP3_MCSPI_CHCONF_DPE0; diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c index 09cdec31a9..e0b4217dc3 100644 --- a/drivers/usb/musb/musb_udc.c +++ b/drivers/usb/musb/musb_udc.c @@ -640,8 +640,17 @@ static void musb_peri_ep0(void) static void musb_peri_rx_ep(unsigned int ep) { - u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount); + u16 peri_rxcount; + u8 peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr); + if (!(peri_rxcsr & MUSB_RXCSR_RXPKTRDY)) { + if (debug_level > 0) + serial_printf("ERROR : %s %d without MUSB_RXCSR_RXPKTRDY set\n", + __PRETTY_FUNCTION__, ep); + return; + } + + peri_rxcount = readw(&musbr->ep[ep].epN.rxcount); if (peri_rxcount) { struct usb_endpoint_instance *endpoint; u32 length; diff --git a/include/atmel_mci.h b/include/atmel_mci.h index 3dd5d67be9..c711881276 100644 --- a/include/atmel_mci.h +++ b/include/atmel_mci.h @@ -38,7 +38,7 @@ typedef struct atmel_mci { u32 sdcr; /* 0x0c */ u32 argr; /* 0x10 */ u32 cmdr; /* 0x14 */ - u32 _18; /* 0x18 */ + u32 blkr; /* 0x18 */ u32 _1c; /* 0x1c */ u32 rspr; /* 0x20 */ u32 rspr1; /* 0x24 */ @@ -118,6 +118,11 @@ typedef struct atmel_mci { #define MMCI_TRTYP_OFFSET 19 #define MMCI_TRTYP_SIZE 2 +/* Bitfields in BLKR */ +/* MMCI_BLKLEN_OFFSET/SIZE already defined in MR */ +#define MMCI_BCNT_OFFSET 0 +#define MMCI_BCNT_SIZE 16 + /* Bitfields in RSPRx */ #define MMCI_RSP_OFFSET 0 #define MMCI_RSP_SIZE 32 diff --git a/include/clps7111.h b/include/clps7111.h deleted file mode 100644 index baf600773b..0000000000 --- a/include/clps7111.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#define SYSCON3 0x2200 /* System Control register 3 ----------------------- */ -#define ADCCON 0x00000001 /* ADC configuration */ -#define CLKCTL 0x00000006 /* processor clock control */ -#define CLKCTL_18 0x0 /* 18.432 MHz */ -#define CLKCTL_36 0x2 /* 36.864 MHz */ -#define CLKCTL_49 0x4 /* 49.152 MHz */ -#define CLKCTL_73 0x6 /* 73.728 MHz */ -#define MCPSEL 0x00000008 /* MCP select */ -#define ADCCKNSEN 0x000010 /* ADC clock sense */ -#define VERSN 0x000000e0 /* additional version bits */ -#define VERSN_SHIFT 5 -#define FASTWAKE 0x0000100 /* Wakeup clock select: 0=8Hz, 1=4kHz */ - -#define INTSR3 0x2240 /* Interrupt Status register 3 --------------------- */ -#define MCPINT 0x00000001 /* MCP interface interrupt (FIQ) */ - -#define INTMR3 0x2280 /* Interrupt Mask register 3 ----------------------- */ -#define LEDFLSH 0x22C0 /* LED Flash control register ---------------------- */ -#define LEDFLSH_RATE 0x03 /* flash rate */ -#define LEDFLSH_RATE_SHIFT 0 -#define LEDFLSH_DUTY 0x3c /* duty ratio */ -#define LEDFLSH_DUTY_SHIFT 2 -#define LEDFLSH_ENABLE 0x40 /* enable */ - -#define IO_START CLPS7111_PHYS_BASE - -#define IO(offset) (IO_START + (offset)) - -#define IO_BYTE(offset) (*(volatile unsigned char *)(IO_START + (offset))) -#define IO_WORD(offset) (*(volatile unsigned long *)(IO_START + (offset))) - -#define IO_PADR IO_BYTE(PADR) -#define IO_PBDR IO_BYTE(PBDR) -#define IO_PDDR IO_BYTE(PDDR) -#define IO_PADDR IO_BYTE(PADDR) -#define IO_PBDDR IO_BYTE(PBDDR) -#define IO_PDDDR IO_BYTE(PDDDR) -#define IO_PEDR IO_BYTE(PEDR) -#define IO_PEDDR IO_BYTE(PEDDR) -#define IO_SYSCON IO_WORD(SYSCON) -#define IO_SYSFLG IO_WORD(SYSFLG) -#define IO_MEMCFG1 IO_WORD(MEMCFG1) -#define IO_MEMCFG2 IO_WORD(MEMCFG2) -#define IO_DRFPR IO_WORD(DRFPR) -#define IO_INTSR IO_WORD(INTSR) -#define IO_INTMR IO_WORD(INTMR) -#define IO_LCDCON IO_WORD(LCDCON) -#define IO_TC1D IO_WORD(TC1D) -#define IO_TC2D IO_WORD(TC2D) -#define IO_RTCDR IO_WORD(RTCDR) -#define IO_RTCMR IO_WORD(RTCMR) -#define IO_PMPCON IO_WORD(PMPCON) -#define IO_CODR IO_BYTE(CODR) -#define IO_UARTDR IO_WORD(UARTDR) -#define IO_UBRLCR IO_WORD(UBRLCR) -#define IO_SYNCIO IO_WORD(SYNCIO) -#define IO_PALLSW IO_WORD(PALLSW) -#define IO_PALMSW IO_WORD(PALMSW) -#define IO_STFCLR IO_WORD(STFCLR) -#define IO_BLEOI IO_WORD(BLEOI) -#define IO_MCEOI IO_WORD(MCEOI) -#define IO_TEOI IO_WORD(TEOI) -#define IO_TC1EOI IO_WORD(TC1EOI) -#define IO_TC2EOI IO_WORD(TC2EOI) -#define IO_RTCEOI IO_WORD(RTCEOI) -#define IO_UMSEOI IO_WORD(UMSEOI) -#define IO_COEOI IO_WORD(COEOI) -#define IO_HALT IO_WORD(HALT) -#define IO_STDBY IO_WORD(STDBY) -#define IO_SYSCON1 IO_WORD(SYSCON1) -#define IO_SYSFLG1 IO_WORD(SYSFLG1) -#define IO_INTSR1 IO_WORD(INTSR1) -#define IO_INTMR1 IO_WORD(INTMR1) -#define IO_UARTDR1 IO_WORD(UARTDR1) -#define IO_UBRLCR1 IO_WORD(UBRLCR1) -#define IO_FRBADDR IO_WORD(FRBADDR) -#define IO_SYSCON2 IO_WORD(SYSCON2) -#define IO_SYSFLG2 IO_WORD(SYSFLG2) -#define IO_INTSR2 IO_WORD(INTSR2) -#define IO_INTMR2 IO_WORD(INTMR2) -#define IO_UARTDR2 IO_WORD(UARTDR2) -#define IO_UBRLCR2 IO_WORD(UBRLCR2) -#define IO_KBDEOI IO_WORD(KBDEOI) - -#define IO_MCCR IO_WORD(MCCR) -#define IO_MCDR0 IO_WORD(MCDR0) -#define IO_MCDR1 IO_WORD(MCDR1) -#define IO_MCDR2 IO_WORD(MCDR2) -#define IO_MCSR IO_WORD(MCSR) -#define IO_SYSCON3 IO_WORD(SYSCON3) -#define IO_INTSR3 IO_WORD(INTSR3) -#define IO_INTMR3 IO_WORD(INTMR3) -#define IO_LEDFLSH IO_WORD(LEDFLSH) - -#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/configs/SX1.h b/include/configs/SX1.h deleted file mode 100644 index 93d031ca85..0000000000 --- a/include/configs/SX1.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */ -#define CONFIG_OMAP_SX1 1 /* a SX1 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SX1 */ - -/* - * USB device configuration - */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 - -#define CONFIG_USBD_VENDORID 0x1234 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Siemens" -#define CONFIG_USBD_PRODUCT_NAME "SX1" - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_I2C - -#undef CONFIG_CMD_NET - - -#include <configs/omap1510.h> - -#define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw" -#ifdef CONFIG_STDOUT_USBTTY -#define CONFIG_PREBOOT "setenv stdout usbtty;setenv stdin usbtty" -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SX1# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ - -/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - * V1 - * PHYS_FLASH_SIZE_1 (16 << 10) 16 MB - * PHYS_FLASH_SIZE_2 (8 << 10) 8 MB - * V2 only 1 flash - * PHYS_FLASH_SIZE_1 (32 << 10) 32 MB - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ -#define CONFIG_SYS_MAX_FLASH_SECT (256) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 } - -/*----------------------------------------------------------------------- - * FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_SIZE_REDUND 0x20000 -#define CONFIG_ENV_OFFSET_REDUND 0x40000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 339d4bdb63..58d62d0c7d 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -81,7 +81,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ @@ -218,6 +218,13 @@ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" #define CONFIG_SPL_ETH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 8ddeff46f4..20a3df5db2 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -209,7 +209,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 698081100e..ce71d1335c 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -206,7 +206,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index cbdc3e93cb..71f765b494 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -89,6 +89,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND #define CONFIG_CMD_SF +#define CONFIG_CMD_MMC /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -138,6 +139,15 @@ #define CONFIG_CMD_UBIFS #endif +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_CMD_FAT +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 46c556ddc8..568ae8e097 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -231,7 +231,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -289,25 +289,15 @@ */ /* **** PISMO SUPPORT *** */ - /* Configure the PISMO */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_ENV_IS_IN_NAND -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1e658067e0..da3263f4f5 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -233,7 +233,7 @@ "dhcp ${loadaddr}; " \ "run netargs; " \ "bootm ${loadaddr}\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index b1071e892c..c81ab7622e 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -180,7 +180,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ "run importbootenv;" \ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 359522a649..bf49cc1381 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -115,8 +115,7 @@ #define CONFIG_USB_ULPI #define CONFIG_USB_ULPI_VIEWPORT_OMAP /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 154 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 152 +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* commands to include */ @@ -182,7 +181,7 @@ #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" @@ -256,22 +255,28 @@ "run nandargs; " \ "ubi part nand0,4;" \ "ubi readvol ${loadaddr} kernel;" \ - "run addip addtty addmtd addfb addeth addmisc;" \ + "run addtty addmtd addfb addeth addmisc;" \ "bootm ${loadaddr}\0" \ - "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\ - "rootfstype=ubifs quiet loglevel=1 " \ - "consoleblank=0 ${swupdate_misc}\0" \ + "preboot=ubi part nand0,7;" \ + "ubi readvol ${loadaddr} splash;" \ + "bmp display ${loadaddr};" \ + "gpio set 55\0" \ + "swupdate_args=setenv bootargs root=/dev/ram " \ + "quiet loglevel=1 " \ + "consoleblank=0 ${swupdate_misc}\0" \ "swupdate=echo Running Sw-Update...;" \ "if printenv mtdparts;then echo Starting SwUpdate...; " \ "else mtdparts default;fi; " \ "ubi part nand0,5;" \ "ubi readvol 0x82000000 kernel_recovery;" \ + "ubi part nand0,6;" \ + "ubi readvol 0x84000000 fs_recovery;" \ "run swupdate_args; " \ "setenv bootargs ${bootargs} " \ "${mtdparts} " \ "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ "omapdss.def_disp=lcd;" \ - "bootm ${loadaddr}\0" + "bootm 0x82000000 0x84000000\0" #define CONFIG_BOOTCOMMAND \ "run nandboot" @@ -302,6 +307,7 @@ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ /* address */ +#define CONFIG_PREBOOT /* * AM3517 has 12 GP timers, they can be driven by the system clock @@ -421,4 +427,13 @@ #define CONFIG_NET_RETRY_COUNT 10 #endif +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#define CONFIG_VIDEO_OMAP3 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + #endif /* __CONFIG_H */ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 1443833c83..2916c710e4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -313,7 +313,7 @@ "dhcp ${uimage}; bootm\0" #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 34b07831cb..dcae53786b 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -182,7 +182,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index fea93b4dc0..62cb42bc4c 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -119,7 +119,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 832050ea97..69937d834e 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -132,7 +132,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 6a6aaa1923..55efeb741c 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -140,7 +140,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index ff2a290d7a..9e8331970c 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -118,7 +118,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 965bea37ca..fbc51625ba 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -106,7 +106,7 @@ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index e7bf6582c3..ec9ab26493 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -164,7 +164,7 @@ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f79f996450..7a3cc16a09 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -289,7 +289,7 @@ "userbutton_nonxm=gpio input 7;\0" /* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run userbutton; then " \ "setenv bootenv uEnv.txt;" \ "else " \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 632a13fa9f..f6e4236998 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -162,7 +162,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index b975a6c9a4..b2457d0bc6 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -202,7 +202,7 @@ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index f6d6f75fca..626cf7afd5 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -188,7 +188,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 891e6f4363..e152055a64 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -198,7 +198,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index cbc9bdb402..a32369af32 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -165,7 +165,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 743edfdcc5..623da777fa 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -167,7 +167,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 00d02e8ca0..5859a7337b 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -201,7 +201,7 @@ "run nandargs; " \ "run loaduimage_ubi; " \ "bootm ${loadaddr}\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/flash.h b/include/flash.h index 6d70bdd81d..7db599e783 100644 --- a/include/flash.h +++ b/include/flash.h @@ -348,7 +348,6 @@ extern flash_info_t *flash_get_info(ulong base); #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */ #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */ -#define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */ #define NUMONYX_256MBIT 0x8922 /* Numonyx P33/30 256MBit 65nm */ /*----------------------------------------------------------------------- diff --git a/spl/Makefile b/spl/Makefile index 20a943c14d..3195390b2f 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -112,16 +112,13 @@ LDPPFLAGS += \ $(shell $(LD) --version | \ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') -ifdef CONFIG_OMAP $(OBJTREE)/MLO: $(obj)u-boot-spl.bin $(OBJTREE)/tools/mkimage -T omapimage \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@ -endif -ifdef CONFIG_AM33XX -$(OBJTREE)/MLO: $(obj)u-boot-spl.bin - $(OBJTREE)/tools/mkimage -T omapimage \ + +$(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin + $(OBJTREE)/tools/mkimage -T omapimage -n byteswap \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@ -endif ALL-y += $(obj)u-boot-spl.bin diff --git a/tools/omapimage.c b/tools/omapimage.c index 5e739ac647..d242cca3a8 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -42,6 +42,18 @@ #define OMAP_GP_HDR_SIZE (sizeof(struct gp_header)) #define OMAP_FILE_HDR_SIZE (OMAP_CH_HDR_SIZE+OMAP_GP_HDR_SIZE) +static int do_swap32 = 0; + +static uint32_t omapimage_swap32(uint32_t data) +{ + uint32_t result = 0; + result = (data & 0xFF000000) >> 24; + result |= (data & 0x00FF0000) >> 8; + result |= (data & 0x0000FF00) << 8; + result |= (data & 0x000000FF) << 24; + return result; +} + static uint8_t omapimage_header[OMAP_FILE_HDR_SIZE]; static int omapimage_check_image_types(uint8_t type) @@ -80,12 +92,17 @@ static int omapimage_verify_header(unsigned char *ptr, int image_size, { struct ch_toc *toc = (struct ch_toc *)ptr; struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE); - uint32_t offset, size; + uint32_t offset, size, gph_size, gph_load_addr; while (toc->section_offset != 0xffffffff && toc->section_size != 0xffffffff) { - offset = toc->section_offset; - size = toc->section_size; + if (do_swap32) { + offset = omapimage_swap32(toc->section_offset); + size = omapimage_swap32(toc->section_size); + } else { + offset = toc->section_offset; + size = toc->section_size; + } if (!offset || !size) return -1; if (offset >= OMAP_CH_HDR_SIZE || @@ -93,9 +110,18 @@ static int omapimage_verify_header(unsigned char *ptr, int image_size, return -1; toc++; } - if (!valid_gph_size(gph->size)) + + if (do_swap32) { + gph_size = omapimage_swap32(gph->size); + gph_load_addr = omapimage_swap32(gph->load_addr); + } else { + gph_size = gph->size; + gph_load_addr = gph->load_addr; + } + + if (!valid_gph_size(gph_size)) return -1; - if (!valid_gph_load_addr(gph->load_addr)) + if (!valid_gph_load_addr(gph_load_addr)) return -1; return 0; @@ -128,12 +154,17 @@ static void omapimage_print_header(const void *ptr) const struct ch_toc *toc = (struct ch_toc *)ptr; const struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE); - uint32_t offset, size; + uint32_t offset, size, gph_size, gph_load_addr; while (toc->section_offset != 0xffffffff && toc->section_size != 0xffffffff) { - offset = toc->section_offset; - size = toc->section_size; + if (do_swap32) { + offset = omapimage_swap32(toc->section_offset); + size = omapimage_swap32(toc->section_size); + } else { + offset = toc->section_offset; + size = toc->section_size; + } if (offset >= OMAP_CH_HDR_SIZE || offset+size >= OMAP_CH_HDR_SIZE) @@ -148,22 +179,26 @@ static void omapimage_print_header(const void *ptr) toc++; } - if (!valid_gph_size(gph->size)) { - fprintf(stderr, - "Error: invalid image size %x\n", - gph->size); + if (do_swap32) { + gph_size = omapimage_swap32(gph->size); + gph_load_addr = omapimage_swap32(gph->load_addr); + } else { + gph_size = gph->size; + gph_load_addr = gph->load_addr; + } + + if (!valid_gph_size(gph_size)) { + fprintf(stderr, "Error: invalid image size %x\n", gph_size); exit(EXIT_FAILURE); } - if (!valid_gph_load_addr(gph->load_addr)) { - fprintf(stderr, - "Error: invalid image load address %x\n", - gph->size); + if (!valid_gph_load_addr(gph_load_addr)) { + fprintf(stderr, "Error: invalid image load address %x\n", + gph_load_addr); exit(EXIT_FAILURE); } - printf("GP Header: Size %x LoadAddr %x\n", - gph->size, gph->load_addr); + printf("GP Header: Size %x LoadAddr %x\n", gph_size, gph_load_addr); } static int toc_offset(void *hdr, void *member) @@ -194,6 +229,18 @@ static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd, gph->size = sbuf->st_size - OMAP_FILE_HDR_SIZE; gph->load_addr = params->addr; + + if (strncmp(params->imagename, "byteswap", 8) == 0) { + do_swap32 = 1; + int swapped = 0; + uint32_t *data = (uint32_t *)ptr; + + while (swapped <= (sbuf->st_size / sizeof(uint32_t))) { + *data = omapimage_swap32(*data); + swapped++; + data++; + } + } } int omapimage_check_params(struct mkimage_params *params) |