pengwyn: nand and ethernet fixes

-> Add National instrument ethernet transceiver configuration used (DP83848)
-> Change cpsw slave phy address
-> modify nand configuration to use the correct ECC and correct nand features

3 files changed, 90 insertions, 28 deletions

diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c
index 815c9a7d15..1f5a5868cb 100644
--- a/board/silica/pengwyn/board.c
+++ b/board/silica/pengwyn/board.c
@@ -141,12 +141,6 @@ static struct cpsw_slave_data cpsw_slaves[] = {
 	{
 		.slave_reg_ofs	= 0x208,
 		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
-		.phy_if		= PHY_INTERFACE_MODE_MII,
-	},
-	{
-		.slave_reg_ofs	= 0x308,
-		.sliver_reg_ofs	= 0xdc0,
 		.phy_addr	= 1,
 		.phy_if		= PHY_INTERFACE_MODE_MII,
 	},
diff --git a/drivers/net/phy/natsemi.c b/drivers/net/phy/natsemi.c
index ea9fe833ed..d2e4c3c487 100644
--- a/drivers/net/phy/natsemi.c
+++ b/drivers/net/phy/natsemi.c
@@ -53,7 +53,7 @@ static struct phy_driver DP83630_driver = {
 
 
 /* NatSemi DP83865 */
-static int dp83865_config(struct phy_device *phydev)
+static int dp838xx_config(struct phy_device *phydev)
 {
 	phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
 	genphy_config_aneg(phydev);
@@ -105,15 +105,56 @@ static struct phy_driver DP83865_driver = {
 	.uid = 0x20005c70,
 	.mask = 0xfffffff0,
 	.features = PHY_GBIT_FEATURES,
-	.config = &dp83865_config,
+	.config = &dp838xx_config,
 	.startup = &dp83865_startup,
 	.shutdown = &genphy_shutdown,
 };
 
+/* NatSemi DP83848 */
+static int dp83848_parse_status(struct phy_device *phydev)
+{
+	int mii_reg;
+
+	mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+	if(mii_reg & (BMSR_100FULL | BMSR_100HALF)) {
+		phydev->speed = SPEED_100;
+	} else {
+		phydev->speed = SPEED_10;
+	}
+
+	if (mii_reg & (BMSR_10FULL | BMSR_100FULL)) {
+		phydev->duplex = DUPLEX_FULL;
+	} else {
+		phydev->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+
+static int dp83848_startup(struct phy_device *phydev)
+{
+	genphy_update_link(phydev);
+	dp83848_parse_status(phydev);
+
+	return 0;
+}
+
+static struct phy_driver DP83848_driver = {
+	.name = "NatSemi DP83848",
+	.uid = 0x20005c90,
+	.mask = 0x2000ff90,
+	.features = PHY_BASIC_FEATURES,
+	.config = &dp838xx_config,
+	.startup = &dp83848_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 int phy_natsemi_init(void)
 {
 	phy_register(&DP83630_driver);
 	phy_register(&DP83865_driver);
+	phy_register(&DP83848_driver);
 
 	return 0;
 }
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index ccb5dd3c03..d68cdede86 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -127,35 +127,58 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_ELM
+
+/* NAND Configuration. */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE	4096
+#define CONFIG_SYS_NAND_OOBSIZE		224
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*4096)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
-					 10, 11, 12, 13, 14, 15, 16, 17, \
-					 18, 19, 20, 21, 22, 23, 24, 25, \
-					 26, 27, 28, 29, 30, 31, 32, 33, \
-					 34, 35, 36, 37, 38, 39, 40, 41, \
-					 42, 43, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56, 57, }
+#define CONFIG_SYS_NAND_ECCPOS		{   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
+					   18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
+					   34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
+					   50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
+					   66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
+					   82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
+					   98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
+					  114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
+					  134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
+					  154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
+					  174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
+					  194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
+
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_ECCBYTES	26
+#define CONFIG_SYS_NAND_ECCSTEPS	8
+#define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
+/* END NAND Configuration. */
+
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+/* #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000 */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
+
+
+
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_CMD_ASKENV /* monitor functions : ask for env variable */
+#define CONFIG_VERSION_VARIABLE /* monitor functions :  u-boot version */
+#define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
 
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
-					"128k(SPL.backup1)," \
-					"128k(SPL.backup2)," \
-					"128k(SPL.backup3),1792k(u-boot)," \
-					"128k(u-boot-spl-os)," \
-					"128k(u-boot-env),5m(kernel),-(rootfs)"
+/* Size must be a multiple of Nand erase size (524288 b) */
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(SPL)," \
+					"512k(SPL.backup1)," \
+					"512k(SPL.backup2)," \
+					"512k(SPL.backup3),1536k(u-boot)," \
+					"512k(u-boot-spl-os)," \
+					"512k(u-boot-env),5m(kernel),-(rootfs)"
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
@@ -198,11 +221,15 @@
 #undef CONFIG_SPL_ETH_SUPPORT
 #endif
 
+/* CPSW ethernet */
+#define CONFIG_NET_MULTI
+
 /* Network */
 #define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET	1
 #define CONFIG_PHY_NATSEMI
+#define CONFIG_PHY_REALTEK
 
 /* CPSW support */
 #define CONFIG_SPL_ETH_SUPPORT