summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2019-12-20 12:44:57 +0100
committerJagan Teki <jagan@amarulasolutions.com>2020-01-27 22:27:21 +0530
commit6954756a1567bd4dc36081651c266dbcf9ad4ef5 (patch)
treebfd1b1dc9b1f728f2c5ff588e7049d2b474e86bd
parentbfcd9298b29c16fdada9d8e772dd9aaff7760f43 (diff)
cmd: spi: Permit setting bus frequency
The 'sspi' command hard-coded 1 MHz bus frequency for all transmissions. Allow changing that at runtime by specifying '@freq' bus frequency in Hz. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
-rw-r--r--cmd/spi.c14
1 files changed, 10 insertions, 4 deletions
diff --git a/cmd/spi.c b/cmd/spi.c
index 75226fd368..bfa185b6ae 100644
--- a/cmd/spi.c
+++ b/cmd/spi.c
@@ -28,6 +28,7 @@
static unsigned int bus;
static unsigned int cs;
static unsigned int mode;
+static unsigned int freq;
static int bitlen;
static uchar dout[MAX_SPI_BYTES];
static uchar din[MAX_SPI_BYTES];
@@ -45,12 +46,12 @@ static int do_spi_xfer(int bus, int cs)
str = strdup(name);
if (!str)
return -ENOMEM;
- ret = spi_get_bus_and_cs(bus, cs, 1000000, mode, "spi_generic_drv",
+ ret = spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv",
str, &dev, &slave);
if (ret)
return ret;
#else
- slave = spi_setup_slave(bus, cs, 1000000, mode);
+ slave = spi_setup_slave(bus, cs, freq, mode);
if (!slave) {
printf("Invalid device %d:%d\n", bus, cs);
return -EINVAL;
@@ -106,6 +107,8 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* We use the last specified parameters, unless new ones are
* entered.
*/
+ if (freq == 0)
+ freq = 1000000;
if ((flag & CMD_FLAG_REPEAT) == 0)
{
@@ -119,7 +122,9 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
bus = CONFIG_DEFAULT_SPI_BUS;
}
if (*cp == '.')
- mode = simple_strtoul(cp+1, NULL, 10);
+ mode = simple_strtoul(cp+1, &cp, 10);
+ if (*cp == '@')
+ freq = simple_strtoul(cp+1, &cp, 10);
}
if (argc >= 3)
bitlen = simple_strtoul(argv[2], NULL, 10);
@@ -159,10 +164,11 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
sspi, 5, 1, do_spi,
"SPI utility command",
- "[<bus>:]<cs>[.<mode>] <bit_len> <dout> - Send and receive bits\n"
+ "[<bus>:]<cs>[.<mode>][@<freq>] <bit_len> <dout> - Send and receive bits\n"
"<bus> - Identifies the SPI bus\n"
"<cs> - Identifies the chip select\n"
"<mode> - Identifies the SPI mode to use\n"
+ "<freq> - Identifies the SPI bus frequency in Hz\n"
"<bit_len> - Number of bits to send (base 10)\n"
"<dout> - Hexadecimal string that gets sent"
);