diff options
| author | Ye Li <ye.li@nxp.com> | 2019-12-09 00:47:18 -0800 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2020-05-01 13:46:22 +0200 |
| commit | 7247974643aa8b924504f901f6fd9d6bc4f1f2fd (patch) | |
| tree | d4fbca34af1755e8ba980fe368be712f78c90156 | |
| parent | 1c97fcda7f31b1697d5dc7d1de74e64b1a11bd9b (diff) | |
imx8m: Enable WDOG_B for timeout
When doing reset_cpu, in normal case the WDOG_B outputs immediately
after we clean WDA bit. But on mscale, the WDOG_B may be later than
internal reset, and cause PMIC not reset. As we enabled the SD3.0
support, the PMIC must be reset to reset SD card.
Change the reset_cpu to enable the WDOG_B for timeout as well, and set
WDOG timeout to 1s.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
| -rw-r--r-- | arch/arm/mach-imx/imx8m/soc.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 8b6be7bc19..f10b71c345 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -410,19 +410,19 @@ int ft_system_setup(void *blob, bd_t *bd) #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SYSRESET) void reset_cpu(ulong addr) { - struct watchdog_regs *wdog = (struct watchdog_regs *)addr; + struct watchdog_regs *wdog = (struct watchdog_regs *)addr; - if (!addr) - wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + if (!addr) + wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; - /* Clear WDA to trigger WDOG_B immediately */ - writew((WCR_WDE | WCR_SRS), &wdog->wcr); + /* Clear WDA to trigger WDOG_B immediately */ + writew((SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS), &wdog->wcr); - while (1) { - /* - * spin for .5 seconds before reset - */ - } + while (1) { + /* + * spin for 1 second before timeout reset + */ + } } #endif |