powerpc/mpc8xxx: Add fine timing support for DDR3

When the DDR3 speed goes higher, we need to utilize fine offset
from SPD.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

4 files changed, 42 insertions, 13 deletions

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
index d0a546610e..3e7c269e40 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *	Dave Liu <daveliu@freescale.com>
  *
  * calculate the organization and timing parameter
@@ -90,6 +90,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 {
 	unsigned int retval;
 	unsigned int mtb_ps;
+	int ftb_10th_ps;
 	int i;
 
 	if (spd->mem_type) {
@@ -197,6 +198,14 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	pdimm->mtb_ps = mtb_ps;
 
 	/*
+	 * FTB - fine timebase
+	 * use 1/10th of ps as our unit to avoid floating point
+	 * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps
+	 */
+	ftb_10th_ps =
+		((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f);
+	pdimm->ftb_10th_ps = ftb_10th_ps;
+	/*
 	 * sdram minimum cycle time
 	 * we assume the MTB is 0.125ns
 	 * eg:
@@ -204,7 +213,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 *        =12 MTB (1.5ns) ->DDR3-1333
 	 *        =10 MTB (1.25ns) ->DDR3-1600
 	 */
-	pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
+	pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps +
+		(spd->fine_tCK_min * ftb_10th_ps) / 10;
 
 	/*
 	 * CAS latency supported
@@ -222,7 +232,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25ns)
 	 */
-	pdimm->tAA_ps = spd->tAA_min * mtb_ps;
+	pdimm->tAA_ps = spd->tAA_min * mtb_ps +
+		(spd->fine_tAA_min * ftb_10th_ps) / 10;
 
 	/*
 	 * min write recovery time
@@ -239,7 +250,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25)
 	 */
-	pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
+	pdimm->tRCD_ps = spd->tRCD_min * mtb_ps +
+		(spd->fine_tRCD_min * ftb_10th_ps) / 10;
 
 	/*
 	 * min row active to row active delay time
@@ -257,7 +269,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25ns)
 	 */
-	pdimm->tRP_ps = spd->tRP_min * mtb_ps;
+	pdimm->tRP_ps = spd->tRP_min * mtb_ps +
+		(spd->fine_tRP_min * ftb_10th_ps) / 10;
 
 	/* min active to precharge delay time
 	 * eg: tRAS_min =
@@ -277,7 +290,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1600H	370 MTB (46.25ns)
 	 */
 	pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
-			* mtb_ps;
+			* mtb_ps + (spd->fine_tRC_min * ftb_10th_ps) / 10;
 	/*
 	 * min refresh recovery delay time
 	 * eg: tRFC_min =
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index 5b724371f6..738c8089f5 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -1121,11 +1121,21 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
 		"therm_sensor  SDRAM Thermal Sensor");
 	PRINT_NXS(33, spd->device_type,
 		"device_type  SDRAM Device Type");
-
-	printf("%-3d-%3d: ",  34, 59);  /* Reserved, General Section */
-
-	for (i = 34; i <= 59; i++)
-		printf("%02x ", spd->res_34_59[i - 34]);
+	PRINT_NXS(34, spd->fine_tCK_min,
+		"fine_tCK_min  Fine offset for tCKmin");
+	PRINT_NXS(35, spd->fine_tAA_min,
+		"fine_tAA_min  Fine offset for tAAmin");
+	PRINT_NXS(36, spd->fine_tRCD_min,
+		"fine_tRCD_min Fine offset for tRCDmin");
+	PRINT_NXS(37, spd->fine_tRP_min,
+		"fine_tRP_min  Fine offset for tRPmin");
+	PRINT_NXS(38, spd->fine_tRC_min,
+		"fine_tRC_min  Fine offset for tRCmin");
+
+	printf("%-3d-%3d: ",  39, 59);  /* Reserved, General Section */
+
+	for (i = 39; i <= 59; i++)
+		printf("%02x ", spd->res_39_59[i - 39]);
 
 	puts("\n");
 
diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
index 982b809462..ffe4db8b8a 100644
--- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
+++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
@@ -43,6 +43,7 @@ typedef struct dimm_params_s {
 	/* DIMM timing parameters */
 
 	unsigned int mtb_ps;	/* medium timebase ps, only for ddr3 */
+	unsigned int ftb_10th_ps; /* fine timebase, in 1/10 ps, only for ddr3 */
 	unsigned int tAA_ps;	/* minimum CAS latency time, only for ddr3 */
 	unsigned int tFAW_ps;	/* four active window delay, only for ddr3 */
 
diff --git a/include/ddr_spd.h b/include/ddr_spd.h
index a9230b9108..9e74d8729e 100644
--- a/include/ddr_spd.h
+++ b/include/ddr_spd.h
@@ -221,7 +221,12 @@ typedef struct ddr3_spd_eeprom_s {
 	unsigned char therm_ref_opt;   /* 31 SDRAM Thermal and Refresh Opts */
 	unsigned char therm_sensor;    /* 32 Module Thermal Sensor */
 	unsigned char device_type;     /* 33 SDRAM device type */
-	unsigned char res_34_59[26];   /* 34-59 Reserved, General Section */
+	int8_t fine_tCK_min;	       /* 34 Fine offset for tCKmin */
+	int8_t fine_tAA_min;	       /* 35 Fine offset for tAAmin */
+	int8_t fine_tRCD_min;	       /* 36 Fine offset for tRCDmin */
+	int8_t fine_tRP_min;	       /* 37 Fine offset for tRPmin */
+	int8_t fine_tRC_min;	       /* 38 Fine offset for tRCmin */
+	unsigned char res_39_59[21];   /* 39-59 Reserved, General Section */
 
 	/* Module-Specific Section: Bytes 60-116 */
 	union {