dm: exynos: Move serial to driver model

Change the Exynos serial driver to work with driver model and switch over
all relevant boards to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>

4 files changed, 75 insertions, 183 deletions

diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 98c62b4c14..8469afdaae 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -9,6 +9,8 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <errno.h>
 #include <fdtdec.h>
 #include <linux/compiler.h>
 #include <asm/io.h>
@@ -18,26 +20,18 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define RX_FIFO_COUNT_MASK	0xff
-#define RX_FIFO_FULL_MASK	(1 << 8)
-#define TX_FIFO_FULL_MASK	(1 << 24)
+#define RX_FIFO_COUNT_SHIFT	0
+#define RX_FIFO_COUNT_MASK	(0xff << RX_FIFO_COUNT_SHIFT)
+#define RX_FIFO_FULL		(1 << 8)
+#define TX_FIFO_COUNT_SHIFT	16
+#define TX_FIFO_COUNT_MASK	(0xff << TX_FIFO_COUNT_SHIFT)
+#define TX_FIFO_FULL		(1 << 24)
 
 /* Information about a serial port */
-struct fdt_serial {
-	u32 base_addr;  /* address of registers in physical memory */
+struct s5p_serial_platdata {
+	struct s5p_uart *reg;  /* address of registers in physical memory */
 	u8 port_id;     /* uart port number */
-	u8 enabled;     /* 1 if enabled, 0 if disabled */
-} config __attribute__ ((section(".data")));
-
-static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
-{
-#ifdef CONFIG_OF_CONTROL
-	return (struct s5p_uart *)(config.base_addr);
-#else
-	u32 offset = dev_index * sizeof(struct s5p_uart);
-	return (struct s5p_uart *)(samsung_get_base_uart() + offset);
-#endif
-}
+};
 
 /*
  * The coefficient, used to calculate the baudrate on S5P UARTs is
@@ -65,23 +59,13 @@ static const int udivslot[] = {
 	0xffdf,
 };
 
-static void serial_setbrg_dev(const int dev_index)
+int s5p_serial_setbrg(struct udevice *dev, int baudrate)
 {
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
-	u32 uclk = get_uart_clk(dev_index);
-	u32 baudrate = gd->baudrate;
+	struct s5p_serial_platdata *plat = dev->platdata;
+	struct s5p_uart *const uart = plat->reg;
+	u32 uclk = get_uart_clk(plat->port_id);
 	u32 val;
 
-#if defined(CONFIG_SILENT_CONSOLE) && \
-		defined(CONFIG_OF_CONTROL) && \
-		!defined(CONFIG_SPL_BUILD)
-	if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0))
-		gd->flags |= GD_FLG_SILENT;
-#endif
-
-	if (!config.enabled)
-		return;
-
 	val = uclk / baudrate;
 
 	writel(val / 16 - 1, &uart->ubrdiv);
@@ -90,15 +74,14 @@ static void serial_setbrg_dev(const int dev_index)
 		writew(udivslot[val % 16], &uart->rest.slot);
 	else
 		writeb(val % 16, &uart->rest.value);
+
+	return 0;
 }
 
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-static int serial_init_dev(const int dev_index)
+static int s5p_serial_probe(struct udevice *dev)
 {
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+	struct s5p_serial_platdata *plat = dev->platdata;
+	struct s5p_uart *const uart = plat->reg;
 
 	/* enable FIFOs, auto clear Rx FIFO */
 	writel(0x3, &uart->ufcon);
@@ -108,14 +91,11 @@ static int serial_init_dev(const int dev_index)
 	/* No interrupts, no DMA, pure polling */
 	writel(0x245, &uart->ucon);
 
-	serial_setbrg_dev(dev_index);
-
 	return 0;
 }
 
-static int serial_err_check(const int dev_index, int op)
+static int serial_err_check(const struct s5p_uart *const uart, int op)
 {
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 	unsigned int mask;
 
 	/*
@@ -133,169 +113,78 @@ static int serial_err_check(const int dev_index, int op)
 	return readl(&uart->uerstat) & mask;
 }
 
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int serial_getc_dev(const int dev_index)
+static int s5p_serial_getc(struct udevice *dev)
 {
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
-
-	if (!config.enabled)
-		return 0;
+	struct s5p_serial_platdata *plat = dev->platdata;
+	struct s5p_uart *const uart = plat->reg;
 
-	/* wait for character to arrive */
-	while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
-					 RX_FIFO_FULL_MASK))) {
-		if (serial_err_check(dev_index, 0))
-			return 0;
-	}
+	if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK))
+		return -EAGAIN;
 
+	serial_err_check(uart, 0);
 	return (int)(readb(&uart->urxh) & 0xff);
 }
 
-/*
- * Output a single byte to the serial port.
- */
-static void serial_putc_dev(const char c, const int dev_index)
+static int s5p_serial_putc(struct udevice *dev, const char ch)
 {
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
-
-	if (!config.enabled)
-		return;
-
-	/* wait for room in the tx FIFO */
-	while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
-		if (serial_err_check(dev_index, 1))
-			return;
-	}
+	struct s5p_serial_platdata *plat = dev->platdata;
+	struct s5p_uart *const uart = plat->reg;
 
-	writeb(c, &uart->utxh);
+	if (readl(&uart->ufstat) & TX_FIFO_FULL)
+		return -EAGAIN;
 
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int serial_tstc_dev(const int dev_index)
-{
-	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+	writeb(ch, &uart->utxh);
+	serial_err_check(uart, 1);
 
-	if (!config.enabled)
-		return 0;
-
-	return (int)(readl(&uart->utrstat) & 0x1);
+	return 0;
 }
 
-static void serial_puts_dev(const char *s, const int dev_index)
+static int s5p_serial_pending(struct udevice *dev, bool input)
 {
-	while (*s)
-		serial_putc_dev(*s++, dev_index);
-}
+	struct s5p_serial_platdata *plat = dev->platdata;
+	struct s5p_uart *const uart = plat->reg;
+	uint32_t ufstat = readl(&uart->ufstat);
 
-/* Multi serial device functions */
-#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
-static int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
-static void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
-static int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
-static int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
-static void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
-static void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
-
-#define INIT_S5P_SERIAL_STRUCTURE(port, __name) {	\
-	.name	= __name,				\
-	.start	= s5p_serial##port##_init,		\
-	.stop	= NULL,					\
-	.setbrg	= s5p_serial##port##_setbrg,		\
-	.getc	= s5p_serial##port##_getc,		\
-	.tstc	= s5p_serial##port##_tstc,		\
-	.putc	= s5p_serial##port##_putc,		\
-	.puts	= s5p_serial##port##_puts,		\
+	if (input)
+		return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT;
+	else
+		return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT;
 }
 
-DECLARE_S5P_SERIAL_FUNCTIONS(0);
-struct serial_device s5p_serial0_device =
-	INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0");
-DECLARE_S5P_SERIAL_FUNCTIONS(1);
-struct serial_device s5p_serial1_device =
-	INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1");
-DECLARE_S5P_SERIAL_FUNCTIONS(2);
-struct serial_device s5p_serial2_device =
-	INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2");
-DECLARE_S5P_SERIAL_FUNCTIONS(3);
-struct serial_device s5p_serial3_device =
-	INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3");
-
-#ifdef CONFIG_OF_CONTROL
-int fdtdec_decode_console(int *index, struct fdt_serial *uart)
+static int s5p_serial_ofdata_to_platdata(struct udevice *dev)
 {
-	const void *blob = gd->fdt_blob;
-	int node;
+	struct s5p_serial_platdata *plat = dev->platdata;
+	fdt_addr_t addr;
 
-	node = fdt_path_offset(blob, "console");
-	if (node < 0)
-		return node;
+	addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
 
-	uart->base_addr = fdtdec_get_addr(blob, node, "reg");
-	if (uart->base_addr == FDT_ADDR_T_NONE)
-		return -FDT_ERR_NOTFOUND;
-
-	uart->port_id = fdtdec_get_int(blob, node, "id", -1);
-	uart->enabled = fdtdec_get_is_enabled(blob, node);
+	plat->reg = (struct s5p_uart *)addr;
+	plat->port_id = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "id", -1);
 
 	return 0;
 }
-#endif
 
-__weak struct serial_device *default_serial_console(void)
-{
-#ifdef CONFIG_OF_CONTROL
-	int index = 0;
-
-	if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) {
-		debug("Cannot decode default console node\n");
-		return NULL;
-	}
-
-	switch (config.port_id) {
-	case 0:
-		return &s5p_serial0_device;
-	case 1:
-		return &s5p_serial1_device;
-	case 2:
-		return &s5p_serial2_device;
-	case 3:
-		return &s5p_serial3_device;
-	default:
-		debug("Unknown config.port_id: %d", config.port_id);
-		break;
-	}
-
-	return NULL;
-#else
-	config.enabled = 1;
-#if defined(CONFIG_SERIAL0)
-	return &s5p_serial0_device;
-#elif defined(CONFIG_SERIAL1)
-	return &s5p_serial1_device;
-#elif defined(CONFIG_SERIAL2)
-	return &s5p_serial2_device;
-#elif defined(CONFIG_SERIAL3)
-	return &s5p_serial3_device;
-#else
-#error "CONFIG_SERIAL? missing."
-#endif
-#endif
-}
+static const struct dm_serial_ops s5p_serial_ops = {
+	.putc = s5p_serial_putc,
+	.pending = s5p_serial_pending,
+	.getc = s5p_serial_getc,
+	.setbrg = s5p_serial_setbrg,
+};
 
-void s5p_serial_initialize(void)
-{
-	serial_register(&s5p_serial0_device);
-	serial_register(&s5p_serial1_device);
-	serial_register(&s5p_serial2_device);
-	serial_register(&s5p_serial3_device);
-}
+static const struct udevice_id s5p_serial_ids[] = {
+	{ .compatible = "samsung,exynos4210-uart" },
+	{ }
+};
+
+U_BOOT_DRIVER(serial_s5p) = {
+	.name	= "serial_s5p",
+	.id	= UCLASS_SERIAL,
+	.of_match = s5p_serial_ids,
+	.ofdata_to_platdata = s5p_serial_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct s5p_serial_platdata),
+	.probe = s5p_serial_probe,
+	.ops	= &s5p_serial_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 4a4b22b74b..34a162d660 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -20,6 +20,7 @@
 #define CONFIG_DM
 #define CONFIG_CMD_DM
 #define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
 
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 76b0503026..3633a355bd 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -292,5 +292,6 @@
 #define CONFIG_DM
 #define CONFIG_CMD_DM
 #define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 424e130ec2..982d0dcea3 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -227,5 +227,6 @@
 #define CONFIG_DM
 #define CONFIG_CMD_DM
 #define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
 
 #endif	/* __CONFIG_H */