mx6: Add support for Phytec pfla02 (NAND)

Add support for Phytec pfla02, equipped with NAND.

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 31C
Reset cause: POR
I2C:   ready
DRAM:  1 GiB
NAND:  2048 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected n25q128 with page size 256 Bytes, erase size 64 KiB, total
16 MiB
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Stefan Christ <s.christ@phytec.de>
CC: Stefan Müller-Klieser <S.Mueller-Klieser@phytec.de>
CC: Christian Hemp <C.Hemp@phytec.de>

8 files changed, 984 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index bb2ce33132..3ffdea20a1 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -331,6 +331,11 @@ config TARGET_PCM058
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
+config TARGET_PFLA02
+	bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
 config TARGET_SECOMX6
 	bool "secomx6 boards"
 
@@ -428,6 +433,7 @@ source "board/freescale/mx6ul_14x14_evk/Kconfig"
 source "board/freescale/mx6ullevk/Kconfig"
 source "board/grinn/liteboard/Kconfig"
 source "board/phytec/pcm058/Kconfig"
+source "board/phytec/pfla02/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
 source "board/samtec/vining_2000/Kconfig"
diff --git a/board/phytec/pfla02/Kconfig b/board/phytec/pfla02/Kconfig
new file mode 100644
index 0000000000..142a1222fc
--- /dev/null
+++ b/board/phytec/pfla02/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_PFLA02
+
+config SYS_BOARD
+	default "pfla02"
+
+config SYS_VENDOR
+	default "phytec"
+
+config SYS_CONFIG_NAME
+	default "pfla02"
+
+endif
diff --git a/board/phytec/pfla02/MAINTAINERS b/board/phytec/pfla02/MAINTAINERS
new file mode 100644
index 0000000000..4b069a90cd
--- /dev/null
+++ b/board/phytec/pfla02/MAINTAINERS
@@ -0,0 +1,6 @@
+PHYTEC PHYFLEX
+M:	Stefano Babic <sbabic@denx.de>
+S:	Maintained
+F:	board/phytec/pfla02/
+F:	include/configs/pfla02.h
+F:	configs/pfla02_defconfig
diff --git a/board/phytec/pfla02/Makefile b/board/phytec/pfla02/Makefile
new file mode 100644
index 0000000000..25af9a01e1
--- /dev/null
+++ b/board/phytec/pfla02/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := pfla02.o
diff --git a/board/phytec/pfla02/README b/board/phytec/pfla02/README
new file mode 100644
index 0000000000..0f46ab8623
--- /dev/null
+++ b/board/phytec/pfla02/README
@@ -0,0 +1,24 @@
+Board information
+-----------------
+
+The evaluation board "pbab01" is thought to be used
+together with the SOM.
+
+More information on the board can be found on manufacturer's
+website:
+
+http://www.phytec.de/produkt/system-on-modules/phyflex-imx-6/
+
+Building U-Boot
+-------------------------------
+
+$ make pfla02_defconfig
+$ make
+
+This generates the artifacts SPL and u-boot.img.
+The SOM can boot from NAND or from SD-Card, having the SPI-NOR
+as second option.
+The dip switch "SW3" on the board let choose the boot device.
+
+SW3_1(on), SW3_2(on), SW3_3(off):	Boot first from SD, then try SPI
+SW3_1(off), SW3_2(on), SW3_3(off):	Boot from SPI
diff --git a/board/phytec/pfla02/pfla02.c b/board/phytec/pfla02/pfla02.c
new file mode 100644
index 0000000000..54e88c6a76
--- /dev/null
+++ b/board/phytec/pfla02/pfla02.c
@@ -0,0 +1,698 @@
+/*
+ * Copyright (C) 2017 Stefano Babic <sbabic@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/spi.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <mmc.h>
+#include <i2c.h>
+#include <fsl_esdhc.h>
+#include <nand.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
+	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+#define ASRC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP  |	\
+		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define NAND_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+	       PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 14)
+#define USDHC2_CD_GPIO	IMX_GPIO_NR(1, 4)
+#define GREEN_LED	IMX_GPIO_NR(2, 31)
+#define RED_LED		IMX_GPIO_NR(1, 30)
+#define IMX6Q_DRIVE_STRENGTH	0x30
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart4_pads[] = {
+	IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const enet_pads[] = {
+	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_MDC__ENET_MDC	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
+			MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
+			MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
+			MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const ecspi3_pads[] = {
+	IOMUX_PADS(PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24  | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const gpios_pads[] = {
+	IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT4__GPIO2_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT6__GPIO2_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_EB3__GPIO2_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+#ifdef CONFIG_CMD_NAND
+/* NAND */
+static iomux_v3_cfg_t const nfc_pads[] = {
+	IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS1__NAND_CE1_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS2__NAND_CE2_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS3__NAND_CE3_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT0__NAND_DQS	| MUX_PAD_CTRL(NAND_PAD_CTRL)),
+};
+#endif
+
+static struct i2c_pads_info i2c_pad_info = {
+	.scl = {
+		.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | I2C_PAD,
+		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | I2C_PAD,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | I2C_PAD,
+		.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | I2C_PAD,
+		.gp = IMX_GPIO_NR(3, 28)
+	}
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{USDHC3_BASE_ADDR,
+	.max_bus_width = 4},
+	{.esdhc_base = USDHC2_BASE_ADDR,
+	.max_bus_width = 4},
+};
+
+#if !defined(CONFIG_SPL_BUILD)
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	IOMUX_PADS(PAD_SD2_CLK__SD2_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_CMD__SD2_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+#endif
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno - 1;
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC2_BASE_ADDR:
+		ret = !gpio_get_value(USDHC2_CD_GPIO);
+		ret = 1;
+		break;
+	case USDHC3_BASE_ADDR:
+		ret = 1;
+		break;
+	}
+
+	return ret;
+}
+
+#ifndef CONFIG_SPL_BUILD
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			SETUP_IOMUX_PADS(usdhc3_pads);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+			break;
+		case 1:
+			SETUP_IOMUX_PADS(usdhc2_pads);
+			gpio_direction_input(USDHC2_CD_GPIO);
+			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+			       "(%d) then supported by the board (%d)\n",
+			       i + 1, CONFIG_SYS_FSL_USDHC_NUM);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	SETUP_IOMUX_PADS(uart4_pads);
+}
+
+static void setup_iomux_enet(void)
+{
+	SETUP_IOMUX_PADS(enet_pads);
+
+	gpio_direction_output(ENET_PHY_RESET_GPIO, 0);
+	mdelay(10);
+	gpio_set_value(ENET_PHY_RESET_GPIO, 1);
+	mdelay(30);
+}
+
+static void setup_spi(void)
+{
+	gpio_request(IMX_GPIO_NR(4, 24), "spi_cs0");
+	gpio_direction_output(IMX_GPIO_NR(4, 24), 1);
+
+	SETUP_IOMUX_PADS(ecspi3_pads);
+
+	enable_spi_clk(true, 2);
+}
+
+static void setup_gpios(void)
+{
+	SETUP_IOMUX_PADS(gpios_pads);
+}
+
+#ifdef CONFIG_CMD_NAND
+static void setup_gpmi_nand(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* config gpmi nand iomux */
+	SETUP_IOMUX_PADS(nfc_pads);
+
+	/* gate ENFC_CLK_ROOT clock first,before clk source switch */
+	clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+	/* config gpmi and bch clock to 100 MHz */
+	clrsetbits_le32(&mxc_ccm->cs2cdr,
+			MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+			MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+			MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+			MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
+			MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
+			MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
+
+	/* enable ENFC_CLK_ROOT clock */
+	setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+	/* enable gpmi and bch clock gating */
+	setbits_le32(&mxc_ccm->CCGR4,
+		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
+
+	/* enable apbh clock gating */
+	setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif
+
+/*
+ * Board revision is coded in 4 GPIOs
+ */
+u32 get_board_rev(void)
+{
+	u32 rev;
+	int i;
+
+	for (i = 0, rev = 0; i < 4; i++)
+		rev |= (gpio_get_value(IMX_GPIO_NR(2, 12 + i)) << i);
+
+	return 16 - rev;
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	if (bus != 2 || (cs != 0))
+		return -EINVAL;
+
+	return IMX_GPIO_NR(4, 24);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	setup_iomux_enet();
+
+	return cpu_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info);
+#endif
+
+#ifdef CONFIG_MXC_SPI
+	setup_spi();
+#endif
+
+	setup_gpios();
+
+#ifdef CONFIG_CMD_NAND
+	setup_gpmi_nand();
+#endif
+	return 0;
+}
+
+
+#ifdef CONFIG_CMD_BMODE
+/*
+ * BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4
+ * see Table 8-11 and Table 5-9
+ *  BOOT_CFG1[7] = 1 (boot from NAND)
+ *  BOOT_CFG1[5] = 0 - raw NAND
+ *  BOOT_CFG1[4] = 0 - default pad settings
+ *  BOOT_CFG1[3:2] = 00 - devices = 1
+ *  BOOT_CFG1[1:0] = 00 - Row Address Cycles = 3
+ *  BOOT_CFG2[4:3] = 00 - Boot Search Count = 2
+ *  BOOT_CFG2[2:1] = 01 - Pages In Block = 64
+ *  BOOT_CFG2[0] = 0 - Reset time 12ms
+ */
+static const struct boot_mode board_boot_modes[] = {
+	/* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
+	{"nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00)},
+	{"mmc0",  MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+	{NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+	char buf[10];
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	snprintf(buf, sizeof(buf), "%d", get_board_rev());
+	setenv("board_rev", buf);
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#include <asm/arch/mx6-ddr.h>
+#include <spl.h>
+#include <libfdt.h>
+
+#define MX6_PHYFLEX_ERR006282	IMX_GPIO_NR(2, 11)
+static void phyflex_err006282_workaround(void)
+{
+	/*
+	 * Boards beginning with 1362.2 have the SD4_DAT3 pin connected
+	 * to the CMIC. If this pin isn't toggled within 10s the boards
+	 * reset. The pin is unconnected on older boards, so we do not
+	 * need a check for older boards before applying this fixup.
+	 */
+
+	gpio_direction_output(MX6_PHYFLEX_ERR006282, 0);
+	mdelay(2);
+	gpio_direction_output(MX6_PHYFLEX_ERR006282, 1);
+	mdelay(2);
+	gpio_set_value(MX6_PHYFLEX_ERR006282, 0);
+
+	gpio_direction_input(MX6_PHYFLEX_ERR006282);
+}
+
+static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_sdclk_0 = 0x00000030,
+	.dram_sdclk_1 = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_reset = 0x00000030,
+	.dram_sdcke0 = 0x00003000,
+	.dram_sdcke1 = 0x00003000,
+	.dram_sdba2 = 0x00000030,
+	.dram_sdodt0 = 0x00000030,
+	.dram_sdodt1 = 0x00000030,
+
+	.dram_sdqs0 = 0x00000028,
+	.dram_sdqs1 = 0x00000028,
+	.dram_sdqs2 = 0x00000028,
+	.dram_sdqs3 = 0x00000028,
+	.dram_sdqs4 = 0x00000028,
+	.dram_sdqs5 = 0x00000028,
+	.dram_sdqs6 = 0x00000028,
+	.dram_sdqs7 = 0x00000028,
+	.dram_dqm0 = 0x00000028,
+	.dram_dqm1 = 0x00000028,
+	.dram_dqm2 = 0x00000028,
+	.dram_dqm3 = 0x00000028,
+	.dram_dqm4 = 0x00000028,
+	.dram_dqm5 = 0x00000028,
+	.dram_dqm6 = 0x00000028,
+	.dram_dqm7 = 0x00000028,
+};
+
+static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_ddr_type =  0x000C0000,
+	.grp_ddrmode_ctl =  0x00020000,
+	.grp_ddrpke =  0x00000000,
+	.grp_addds = IMX6Q_DRIVE_STRENGTH,
+	.grp_ctlds = IMX6Q_DRIVE_STRENGTH,
+	.grp_ddrmode =  0x00020000,
+	.grp_b0ds = 0x00000028,
+	.grp_b1ds = 0x00000028,
+	.grp_b2ds = 0x00000028,
+	.grp_b3ds = 0x00000028,
+	.grp_b4ds = 0x00000028,
+	.grp_b5ds = 0x00000028,
+	.grp_b6ds = 0x00000028,
+	.grp_b7ds = 0x00000028,
+};
+
+static const struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 =  0x00110011,
+	.p0_mpwldectrl1 =  0x00240024,
+	.p1_mpwldectrl0 =  0x00260038,
+	.p1_mpwldectrl1 =  0x002C0038,
+	.p0_mpdgctrl0 =  0x03400350,
+	.p0_mpdgctrl1 =  0x03440340,
+	.p1_mpdgctrl0 =  0x034C0354,
+	.p1_mpdgctrl1 =  0x035C033C,
+	.p0_mprddlctl =  0x322A2A2A,
+	.p1_mprddlctl =  0x302C2834,
+	.p0_mpwrdlctl =  0x34303834,
+	.p1_mpwrdlctl =  0x422A3E36,
+};
+
+/* Index in RAM Chip array */
+enum {
+	RAM_1GB,
+	RAM_2GB,
+	RAM_4GB
+};
+
+static struct mx6_ddr3_cfg mt41k_xx[] = {
+/* MT41K64M16JT-125 (1Gb density) */
+	{
+	.mem_speed = 1600,
+	.density = 1,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 13,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+	.SRT       = 1,
+	},
+
+/* MT41K256M16JT-125 (2Gb density) */
+	{
+	.mem_speed = 1600,
+	.density = 2,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 14,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+	.SRT       = 1,
+	},
+
+/* MT41K256M16JT-125 (4Gb density) */
+	{
+	.mem_speed = 1600,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 15,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+	.SRT       = 1,
+	}
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0x00C03F3F, &ccm->CCGR0);
+	writel(0x0030FC03, &ccm->CCGR1);
+	writel(0x0FFFC000, &ccm->CCGR2);
+	writel(0x3FF00000, &ccm->CCGR3);
+	writel(0x00FFF300, &ccm->CCGR4);
+	writel(0x0F0000C3, &ccm->CCGR5);
+	writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void gpr_init(void)
+{
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/* enable AXI cache for VDOA/VPU/IPU */
+	writel(0xF00000CF, &iomux->gpr[4]);
+	/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+	writel(0x007F007F, &iomux->gpr[6]);
+	writel(0x007F007F, &iomux->gpr[7]);
+}
+
+static void spl_dram_init(struct mx6_ddr3_cfg *mem_ddr)
+{
+	struct mx6_ddr_sysinfo sysinfo = {
+		/* width of data bus:0=16,1=32,2=64 */
+		.dsize = 2,
+		/* config for full 4GB range so that get_mem_size() works */
+		.cs_density = 32, /* 32Gb per CS */
+		/* single chip select */
+		.ncs = 2,
+		.cs1_mirror = 0,
+		.rtt_wr = 1 /*DDR3_RTT_60_OHM*/,	/* RTT_Wr = RZQ/4 */
+		.rtt_nom = 1 /*DDR3_RTT_60_OHM*/,	/* RTT_Nom = RZQ/4 */
+		.walat = 1,	/* Write additional latency */
+		.ralat = 5,	/* Read additional latency */
+		.mif3_mode = 3,	/* Command prediction working mode */
+		.bi_on = 1,	/* Bank interleaving enabled */
+		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
+		.refsel = 1,	/* Refresh cycles at 32KHz */
+		.refr = 7,	/* 8 refresh commands per refresh cycle */
+	};
+
+	mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, mem_ddr);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	if (spl_boot_device() == BOOT_DEVICE_SPI)
+		printf("MMC SEtup, Boot SPI");
+
+	SETUP_IOMUX_PADS(usdhc3_pads);
+	usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg[0].max_bus_width = 4;
+	gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+
+	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+	printf("Boot device %x\n", spl_boot_list[0]);
+	switch (spl_boot_list[0]) {
+	case BOOT_DEVICE_SPI:
+		spl_boot_list[1] = BOOT_DEVICE_UART;
+		break;
+	case BOOT_DEVICE_MMC1:
+		spl_boot_list[1] = BOOT_DEVICE_SPI;
+		spl_boot_list[2] = BOOT_DEVICE_UART;
+		break;
+	default:
+		printf("Boot device %x\n", spl_boot_list[0]);
+	}
+}
+
+/*
+ * This is used because get_ram_size() does not
+ * take care of cache, resulting a wrong size
+ * pfla02 has just 1, 2 or 4 GB option
+ * Function checks for mirrors in the first CS
+ */
+#define RAM_TEST_PATTERN	0xaa5555aa
+static unsigned int pfla02_detect_ramsize(void)
+{
+	u32 *p, *p1;
+	unsigned int offset = 512 * 1024 * 1024;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		p = (u32 *)PHYS_SDRAM;
+		p1 = (u32 *)(PHYS_SDRAM + (i + 1) * offset);
+
+		*p1 = 0;
+		*p = RAM_TEST_PATTERN;
+
+		/*
+		 *  This is required to detect mirroring
+		 *  else we read back values from cache
+		 */
+		flush_dcache_all();
+
+		if (*p == *p1)
+			return i;
+	}
+	return RAM_4GB;
+}
+
+void board_init_f(ulong dummy)
+{
+	unsigned int ramchip;
+#ifdef CONFIG_CMD_NAND
+	/* Enable NAND */
+	setup_gpmi_nand();
+#endif
+
+	/* setup clock gating */
+	ccgr_init();
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	/* setup AXI */
+	gpr_init();
+
+	board_early_init_f();
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	setup_spi();
+
+	setup_gpios();
+
+	/* DDR initialization */
+	spl_dram_init(&mt41k_xx[RAM_4GB]);
+	ramchip = pfla02_detect_ramsize();
+	if (ramchip != RAM_4GB)
+		spl_dram_init(&mt41k_xx[ramchip]);
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	phyflex_err006282_workaround();
+
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
+#endif
diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig
new file mode 100644
index 0000000000..1729e5e15e
--- /dev/null
+++ b/configs/pfla02_defconfig
@@ -0,0 +1,50 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PFLA02=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_HDMIDETECT=y
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL=y
+CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_PARTITION_UUIDS is not set
+# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_DM=y
+CONFIG_MTD=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_THERMAL=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h
new file mode 100644
index 0000000000..a239b11029
--- /dev/null
+++ b/include/configs/pfla02.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) Stefano Babic <sbabic@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#ifndef __PCM058_CONFIG_H
+#define __PCM058_CONFIG_H
+
+#include <config_distro_defaults.h>
+
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#include "imx6_spl.h"
+#endif
+
+#include "mx6_common.h"
+
+/* Thermal */
+#define CONFIG_IMX_THERMAL
+
+/* Serial */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	       UART4_BASE
+#define CONSOLE_DEV		"ttymxc3"
+
+/* Early setup */
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(8 * SZ_1M)
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		3
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_KSZ9031
+
+/* SPI Flash */
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		2
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 0 */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_NAND
+/* Enable NAND support */
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* Filesystem support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT    "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT  "mtdparts=gpmi-nand:-(nand);" \
+	"spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
+
+/* Various command support */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* MMC Configs */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+
+/* Environment organization */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE                (16 * 1024)
+#define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
+#define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
+#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
+						CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (0x1E0000)
+#define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=${console},${baudrate}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+		"${netmask}:${hostname}:${netdev}:off\0"		\
+	"addmisc=setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"addmtd=run mtdnand;run mtdspi;"				\
+		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"mtdnand=setenv mtdparts mtdparts=gpmi-nand:"			\
+		"40m(Kernels),400m(root),-(nand)\0"			\
+	"mtdspi=setenv mtdparts ${mtdparts}"				\
+		"';spi2.0:1024k(bootloader),"				\
+			"64k(env1),64k(env2),-(rescue)'\0"		\
+	"bootcmd=if test -n ${rescue};"					\
+		"then run swupdate;fi;run nandboot;run swupdate\0"	\
+	"bootfile=uImage\0"						\
+	"bootimage=uImage\0"						\
+	"console=ttymxc3\0"						\
+	"fdt_addr_r=0x18000000\0"					\
+	"fdt_file=pfla02.dtb\0"						\
+	"fdt_high=0xffffffff\0"						\
+	"initrd_high=0xffffffff\0"					\
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"		\
+	"miscargs=panic=1 quiet\0"					\
+	"mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0"		\
+	"mmcboot=if run mmcload;then "					\
+		"run mmcargs addcons addmisc;"				\
+			"bootm;fi\0"					\
+	"mmcload=mmc rescan;"						\
+		"load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
+	"mmcpart=1\0"							\
+	"mmcroot=/dev/mmcblk0p1\0"					\
+	"ubiroot=1\0"							\
+	"nandargs=setenv bootargs ubi.mtd=1 "				\
+		"root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0"		\
+	"nandboot=run mtdnand;ubi part nand0,0;"			\
+		"ubi readvol ${kernel_addr_r} kernel${ubiroot};"	\
+		"run nandargs addip addcons addmtd addmisc;"		\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};"	\
+		"tftp ${fdt_addr_r} ${board_name}/${fdt_file};"		\
+		"run nfsargs addip addcons addmtd addmisc;"		\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};"	\
+		"run nfsargs addip addcons addmtd addmisc;"		\
+		"bootm ${kernel_addr_r}\0"				\
+	"nfsargs=setenv bootargs root=/dev/nfs"				\
+		" nfsroot=${serverip}:${nfsroot},v3 panic=1\0"		\
+	"swupdate=setenv bootargs root=/dev/ram;"			\
+		"run addip addcons addmtd addmisc;"			\
+		"sf probe;"						\
+		"sf read ${kernel_addr_r} 120000 600000;"		\
+		"sf read 14000000 730000 800000;"			\
+		"bootm ${kernel_addr_r} 14000000\0"
+
+#endif