nios2: rebase nios2-generic board to 3c120 reference design

Though nios2-generic board meant to be a template, it is helpful
to be able to test on a real hardware. As the nios2 linux is
developed and tested on a 3c120 FPGA based Golden Hardware Reference
Design, it makes sense to rebase nios2-generic on this FPGA design.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

2 files changed, 78 insertions, 60 deletions

diff --git a/board/altera/nios2-generic/custom_fpga.h b/board/altera/nios2-generic/custom_fpga.h
index fd3ec9a8d8..cf75d35648 100644
--- a/board/altera/nios2-generic/custom_fpga.h
+++ b/board/altera/nios2-generic/custom_fpga.h
@@ -1,78 +1,89 @@
 /*
- * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+ * This header is generated by sopc2dts
+ * Sopc2dts is written by Walter Goossens <waltergoossens@home.nl>
+ * in cooperation with the nios2 community <Nios2-dev@sopc.et.ntust.edu.tw>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file is generated by sopc-create-config-files.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef _CUSTOM_FPGA_H_
 #define _CUSTOM_FPGA_H_
 
-/* generated from std_1c20.sopc */
-
-/* cpu.data_master is a altera_nios2 */
-#define CONFIG_SYS_CLK_FREQ 50000000
-#define CONFIG_SYS_RESET_ADDR 0x00000000
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020
-#define CONFIG_SYS_ICACHE_SIZE 4096
-#define CONFIG_SYS_ICACHELINE_SIZE 32
-#define CONFIG_SYS_DCACHE_SIZE 2048
-#define CONFIG_SYS_DCACHELINE_SIZE 4
-
-/* sdram.s1 is a altera_avalon_new_sdram_controller */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000
-
-/* uart1.s1 is a altera_avalon_uart */
-#define CONFIG_SYS_UART_BASE 0x82120840
-#define CONFIG_SYS_UART_FREQ 50000000
-#define CONFIG_SYS_UART_BAUD 115200
-
-/* lan91c111.s1 is a altera_avalon_lan91c111 */
-#define CONFIG_SMC91111_BASE 0x82110300
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-
-/* epcs_controller.epcs_control_port is a altera_avalon_epcs_flash_controller */
-#define EPCS_CONTROLLER_REG_BASE 0x82100200
-#define CONFIG_SYS_ALTERA_SPI_LIST { EPCS_CONTROLLER_REG_BASE }
-#define CONFIG_ALTERA_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
+/* generated from qsys_ghrd_3c120.sopcinfo */
+
+/* Dumping slaves of cpu.data_master */
+
+/* cpu.jtag_debug_module is a altera_nios2_qsys */
+#define CONFIG_SYS_CLK_FREQ	125000000
+#define CONFIG_SYS_DCACHE_SIZE	32768
+#define CONFIG_SYS_DCACHELINE_SIZE	32
+#define CONFIG_SYS_ICACHELINE_SIZE	32
+#define CONFIG_SYS_EXCEPTION_ADDR	0xd0000020
+#define CONFIG_SYS_ICACHE_SIZE	32768
+#define CONFIG_SYS_RESET_ADDR	0xc2800000
+#define IO_REGION_BASE	0xE0000000
+
+/* pb_cpu_to_ddr2_bot.s0 is a altera_avalon_mm_bridge */
+/* Dumping slaves of pb_cpu_to_ddr2_bot.m0 */
+
+/* ddr2_bot.s1 is a altmemddr2 */
+#define CONFIG_SYS_SDRAM_BASE	0xD0000000
+#define CONFIG_SYS_SDRAM_SIZE	0x08000000
+
+/* pb_cpu_to_io.s0 is a altera_avalon_mm_bridge */
+/* Dumping slaves of pb_cpu_to_io.m0 */
+
+/* timer_1ms.s1 is a altera_avalon_timer */
+#define CONFIG_SYS_TIMER_IRQ	11
+#define CONFIG_SYS_TIMER_FREQ	125000000
+#define CONFIG_SYS_TIMER_BASE	0xE8400000
+
+/* sysid.control_slave is a altera_avalon_sysid_qsys */
+#define CONFIG_SYS_SYSID_BASE	0xE8004D40
 
 /* jtag_uart.avalon_jtag_slave is a altera_avalon_jtag_uart */
-#define CONFIG_SYS_JTAG_UART_BASE 0x821208b0
+#define CONFIG_SYS_JTAG_UART_BASE	0xE8004D50
+
+/* tse_mac.control_port is a triple_speed_ethernet */
+#define CONFIG_SYS_ALTERA_TSE_RX_FIFO	2048
+#define CONFIG_SYS_ALTERA_TSE_SGDMA_TX_BASE	0xE8004800
+#define CONFIG_SYS_ALTERA_TSE_SGDMA_RX_BASE	0xE8004400
+#define CONFIG_SYS_ALTERA_TSE_TX_FIFO	2048
+#define CONFIG_SYS_ALTERA_TSE_DESC_SIZE	0x00002000
+#define CONFIG_SYS_ALTERA_TSE_MAC_BASE	0xE8004000
+#define CONFIG_SYS_ALTERA_TSE_DESC_BASE	0xE8002000
+#define CONFIG_ALTERA_TSE
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_SYS_ALTERA_TSE_PHY_ADDR 18
+#define CONFIG_SYS_ALTERA_TSE_FLAGS 1
+
+/* uart.s1 is a altera_avalon_uart */
+#define CONFIG_SYS_UART_BAUD	115200
+#define CONFIG_SYS_UART_BASE	0xE8004C80
+#define CONFIG_SYS_UART_FREQ	62500000
+
+/* user_led_pio_8out.s1 is a altera_avalon_pio */
+#define USER_LED_PIO_8OUT_BASE	0xE8004CC0
 
-/* led_pio.s1 is a altera_avalon_pio */
-#define LED_PIO_BASE 0x82120870
-#define LED_PIO_WIDTH 8
-#define LED_PIO_RSTVAL 0x0
+/* user_dipsw_pio_8in.s1 is a altera_avalon_pio */
+#define USER_DIPSW_PIO_8IN_BASE	0xE8004CE0
+#define USER_DIPSW_PIO_8IN_IRQ	8
 
-/* high_res_timer.s1 is a altera_avalon_timer */
-#define CONFIG_SYS_TIMER_BASE 0x82120820
-#define CONFIG_SYS_TIMER_IRQ 3
-#define CONFIG_SYS_TIMER_FREQ 50000000
+/* user_pb_pio_4in.s1 is a altera_avalon_pio */
+#define USER_PB_PIO_4IN_BASE	0xE8004D00
+#define USER_PB_PIO_4IN_IRQ	9
+
+/* cfi_flash_64m.uas is a altera_generic_tristate_controller */
+#define CFI_FLASH_64M_BASE	0xE0000000
 
 /* ext_flash.s1 is a altera_avalon_cfi_flash */
-#define CONFIG_SYS_FLASH_BASE 0x80000000
+#define CONFIG_SYS_FLASH_BASE CFI_FLASH_64M_BASE
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 1024
-
-/* ext_ram.s1 is a altera_nios_dev_kit_stratix_edition_sram2 */
-#define CONFIG_SYS_SRAM_BASE 0x02000000
-#define CONFIG_SYS_SRAM_SIZE 0x00100000
-
-/* sysid.control_slave is a altera_avalon_sysid */
-#define CONFIG_SYS_SYSID_BASE 0x821208b8
+#define CONFIG_SYS_MAX_FLASH_SECT 512
 
 #endif /* _CUSTOM_FPGA_H_ */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 51b1d00d99..6247bf1569 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -22,7 +22,7 @@
 /*
  * SERIAL
  */
-#define CONFIG_ALTERA_UART
+#define CONFIG_ALTERA_JTAG_UART
 #if defined(CONFIG_ALTERA_JTAG_UART)
 # define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_JTAG_UART_BASE
 #else
@@ -56,6 +56,9 @@
 #define CONFIG_BOARD_SPECIFIC_LED
 #define CONFIG_GPIO_LED		/* Enable GPIO LED driver */
 #define CONFIG_GPIO			/* Enable GPIO driver */
+#define LED_PIO_BASE			USER_LED_PIO_8OUT_BASE
+#define LED_PIO_WIDTH			8
+#define LED_PIO_RSTVAL			0xff
 
 #define STATUS_LED_BIT			0	/* Bit-0 on GPIO */
 #define STATUS_LED_STATE		1	/* Blinking */
@@ -86,6 +89,10 @@
 # define CONFIG_CMD_PING
 #endif
 
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_LMB
+
 /*
  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
@@ -95,7 +102,7 @@
  */
 #define CONFIG_ENV_IS_IN_FLASH
 
-#define CONFIG_ENV_SIZE		0x10000	/* 64k, 1 sector */
+#define CONFIG_ENV_SIZE		0x20000	/* 128k, 1 sector */
 #define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
 #define CONFIG_ENV_ADDR		((CONFIG_SYS_RESET_ADDR + \
 					  CONFIG_SYS_MONITOR_LEN) | \