ColdFire: Update EB+MCF-EV123 platform

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

3 files changed, 340 insertions, 7 deletions

diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index ed3ac07558..ceeffa7753 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
+COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
new file mode 100644
index 0000000000..ebd3ed9387
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/mii.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		MCFGPIO_PASPAR |= 0x0F00;
+		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+	} else {
+		MCFGPIO_PASPAR &= 0xF0FF;
+		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
+	}
+	return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
+#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
+
+#define STR_ID_LXT970		"LXT970"
+#define STR_ID_LXT971		"LXT971"
+#define STR_ID_82555		"Intel82555"
+#define STR_ID_QS6612		"QS6612"
+#define STR_ID_AMD79C784	"AMD79C784"
+#define STR_ID_AMD79C874VC	"AMD79C874VC"
+#define STR_ID_LSI80225		"LSI80225"
+#define STR_ID_LSI80225B	"LSI80225/B"
+#define STR_ID_DP83848VV	"N83848"
+#define STR_ID_DP83849		"N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+	volatile fec_t *fecp = (fec_t *) (info->miibase);
+	int i;
+
+	fecp->ecr = FEC_ECR_RESET;
+	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+		udelay(1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf("FEC_RESET_DELAY timeout\n");
+	}
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	volatile fec_t *ep;
+	uint mii_reply;
+	int j = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	ep = (fec_t *) info->miibase;
+
+	ep->mmfr = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j >= MCFFEC_TOUT_LOOP) {
+		printf("MII not complete\n");
+		return -1;
+	}
+
+	mii_reply = ep->mmfr;	/* result from phy */
+	ep->eir = FEC_EIR_MII;	/* clear MII complete */
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+	return (mii_reply & 0xffff);	/* data read from phy */
+}
+#endif				/* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+	struct fec_info_s *info = dev->priv;
+	int phyaddr, pass;
+	uint phyno, phytype;
+
+	if (info->phyname_init)
+		return info->phy_addr;
+
+	phyaddr = -1;		/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+
+		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |=
+				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_AMD79C874VC:
+					strcpy(info->phy_name,
+					       STR_ID_AMD79C874VC);
+					info->phyname_init = 1;
+					break;
+				default:
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
+					break;
+				}
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ", phyno, pass);
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_AMD79C874VC:
+					printf(STR_ID_AMD79C874VC);
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0)
+		printf("No PHY device found.\n");
+
+	return phyaddr;
+}
+#endif				/* CFG_DISCOVER_PHY */
+
+int mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+	volatile fec_t *fecp;
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	int miispd = 0, i = 0;
+	u16 autoneg = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	fecp = (fec_t *) info->miibase;
+
+	fecpin_setclear(dev, 1);
+
+	mii_reset(info);
+
+	/* We use strictly polling mode only */
+	fecp->eimr = 0;
+
+	/* Clear any pending interrupt */
+	fecp->eir = 0xffffffff;
+
+	/* Set MII speed */
+	miispd = (gd->bus_clk / 1000000) / 5;
+	fecp->mscr = miispd << 1;
+
+	info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+	while (i < MCFFEC_TOUT_LOOP) {
+		autoneg = 0;
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		i++;
+
+		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+			break;
+
+		udelay(500);
+	}
+	if (i >= MCFFEC_TOUT_LOOP) {
+		printf("Auto Negotiation not complete\n");
+	}
+
+	/* adapt to the half/full speed settings */
+	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		       unsigned short *value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+			unsigned short value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+
+#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index a8697ec88d..dae5295dd1 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -40,9 +40,8 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define FEC_ENET
-#define CONFIG_ETHADDR 00:CF:52:82:EB:01
-
+#define CONFIG_MCFUART
+#define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE 9600
 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
@@ -84,7 +83,39 @@
 #include <config_cmd_default.h>
 
 #undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CFG_DISCOVER_PHY
+#	define CFG_RX_ETH_BUFFER	8
+#	define CFG_FAULT_ECHO_LINK_DOWN
+
+#	define CFG_FEC0_PINMUX		0
+#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define MCFFEC_TOUT_LOOP 	50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CFG_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CFG_FAULT_ECHO_LINK_DOWN
+#			define CFG_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CFG_DISCOVER_PHY */
+#endif
 
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_ETHADDR	00:CF:52:82:EB:01
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* CONFIG_MCFFEC */
 
 #define CONFIG_BOOTDELAY	5
 #define CFG_PROMPT		"\nEV123 U-Boot> "
@@ -122,9 +153,6 @@
  */
 #define	CFG_MBAR		0x40000000
 
-#define	CFG_DISCOVER_PHY
-/* #define	CFG_ENET_BD_BASE	0x380000 */
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
@@ -151,6 +179,7 @@
 
 #define CFG_FLASH_BASE		0xFFE00000
 #define	CFG_INT_FLASH_BASE	0xF0000000
+#define CFG_INT_FLASH_ENABLE	0x21
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */