powerpc: mpc85xx: remove P2020COME board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>

12 files changed, 1 insertions, 998 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 009d830ff2..e643f91877 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC
 config TARGET_P1_TWR
 	bool "Support p1_twr"
 
-config TARGET_P2020COME
-	bool "Support P2020COME"
-
 config TARGET_P2020DS
 	bool "Support P2020DS"
 
@@ -181,7 +178,6 @@ source "board/freescale/p1022ds/Kconfig"
 source "board/freescale/p1023rdb/Kconfig"
 source "board/freescale/p1_p2_rdb_pc/Kconfig"
 source "board/freescale/p1_twr/Kconfig"
-source "board/freescale/p2020come/Kconfig"
 source "board/freescale/p2020ds/Kconfig"
 source "board/freescale/p2041rdb/Kconfig"
 source "board/freescale/qemu-ppce500/Kconfig"
diff --git a/board/freescale/p2020come/Kconfig b/board/freescale/p2020come/Kconfig
deleted file mode 100644
index 8ce5cf1300..0000000000
--- a/board/freescale/p2020come/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P2020COME
-
-config SYS_BOARD
-	default "p2020come"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P2020COME"
-
-endif
diff --git a/board/freescale/p2020come/MAINTAINERS b/board/freescale/p2020come/MAINTAINERS
deleted file mode 100644
index ab3ef94583..0000000000
--- a/board/freescale/p2020come/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-P2020COME BOARD
-M:	Ira W. Snyder <iws@ovro.caltech.edu>
-S:	Maintained
-F:	board/freescale/p2020come/
-F:	include/configs/P2020COME.h
-F:	configs/P2020COME_SDCARD_defconfig
-F:	configs/P2020COME_SPIFLASH_defconfig
diff --git a/board/freescale/p2020come/Makefile b/board/freescale/p2020come/Makefile
deleted file mode 100644
index 4857136f1f..0000000000
--- a/board/freescale/p2020come/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y			+= p2020come.o
-obj-y			+= ddr.o
-obj-y			+= law.o
-obj-y			+= tlb.o
diff --git a/board/freescale/p2020come/ddr.c b/board/freescale/p2020come/ddr.c
deleted file mode 100644
index b642e1255c..0000000000
--- a/board/freescale/p2020come/ddr.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2009, 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-
-	if (!pdimm->n_ranks)
-		return;
-
-	/*
-	 * Set DDR_SDRAM_CLK_CNTL = 0x02800000
-	 *
-	 * Clock is launched 5/8 applied cycle after address/command
-	 */
-	popts->clk_adjust = 5;
-}
diff --git a/board/freescale/p2020come/law.c b/board/freescale/p2020come/law.c
deleted file mode 100644
index 7048a0823e..0000000000
--- a/board/freescale/p2020come/law.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * Create a dummy LAW entry for the DDR SDRAM which will be replaced when
- * the DDR SPD setup code runs.
- *
- * This table would be empty, except that it is used before the BSS section is
- * initialized, and therefore must have at least one entry to push it into
- * the DATA section.
- */
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_SDRAM_BASE, LAW_SIZE_4K, LAW_TRGT_IF_DDR),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p2020come/p2020come.c b/board/freescale/p2020come/p2020come.c
deleted file mode 100644
index 1db37e3be8..0000000000
--- a/board/freescale/p2020come/p2020come.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright 2009,2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/mpc85xx_gpio.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <vsc7385.h>
-#include <netdev.h>
-#include <mmc.h>
-#include <malloc.h>
-#include <i2c.h>
-
-#if defined(CONFIG_PCI)
-#include <asm/fsl_pci.h>
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void ft_pci_board_setup(void *blob)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
-
-#define BOARD_PERI_RST_SET	(VSC7385_RST_SET | SLIC_RST_SET | \
-				 SGMII_PHY_RST_SET | PCIE_RST_SET | \
-				 RGMII_PHY_RST_SET)
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-#define BOARDREV_B	0x10100000
-#define BOARDREV_C	0x00100000
-#define BOARDREV_D	0x00000000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_50	50000000
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-
-	ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	switch (ddr_ratio) {
-	case 0x0C:
-		return SYSCLK_66;
-	case 0x0A:
-	case 0x08:
-		return SYSCLK_100;
-	default:
-		puts("ERROR: unknown DDR ratio\n");
-		return SYSCLK_100;
-	}
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-
-	ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	switch (ddr_ratio) {
-	case 0x0C:
-	case 0x0A:
-		return SYSCLK_66;
-	case 0x08:
-		return SYSCLK_100;
-	default:
-		puts("ERROR: unknown DDR ratio\n");
-		return SYSCLK_100;
-	}
-}
-
-#ifdef CONFIG_MMC
-int board_early_init_f(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-
-	/* All the device are enable except for SRIO12 */
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_SRIO);
-	return 0;
-}
-#endif
-
-#define GPIO_DIR		0x0f3a0000
-#define GPIO_ODR		0x00000000
-#define GPIO_DAT		0x001a0000
-
-int checkboard(void)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xC00);
-
-	/*
-	 * GPIO
-	 * 0 - 3: CarryBoard Input;
-	 * 4 - 7: CarryBoard Output;
-	 * 8 : Mux as SDHC_CD (card detection)
-	 * 9 : Mux as SDHC_WP
-	 * 10 : Clear Watchdog timer
-	 * 11 : LED Input
-	 * 12 : Output to 1
-	 * 13 : Open Drain
-	 * 14 : LED Output
-	 * 15 : Switch Input
-	 *
-	 * Set GPIOs 11, 12, 14 to 1.
-	 */
-	out_be32(&pgpio->gpodr, GPIO_ODR);
-	mpc85xx_gpio_set(0xffffffff, GPIO_DIR, GPIO_DAT);
-
-	puts("Board: Freescale COM Express P2020\n");
-	return 0;
-}
-
-#define M41ST85W_I2C_BUS	1
-#define M41ST85W_I2C_ADDR	0x68
-#define M41ST85W_ERROR(fmt, args...) printf("ERROR: M41ST85W: " fmt, ##args)
-
-static void m41st85w_clear_bit(u8 reg, u8 mask, const char *name)
-{
-	u8 data;
-
-	if (i2c_read(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
-		M41ST85W_ERROR("unable to read %s bit\n", name);
-		return;
-	}
-
-	if (data & mask) {
-		data &= ~mask;
-		if (i2c_write(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
-			M41ST85W_ERROR("unable to clear %s bit\n", name);
-			return;
-		}
-	}
-}
-
-#define M41ST85W_REG_SEC2	0x01
-#define M41ST85W_REG_SEC2_ST	0x80
-
-#define M41ST85W_REG_ALHOUR	0x0c
-#define M41ST85W_REG_ALHOUR_HT	0x40
-
-/*
- * The P2020COME board has a STMicro M41ST85W RTC/watchdog
- * at i2c bus 1 address 0x68.
- */
-static void start_rtc(void)
-{
-	unsigned int bus = i2c_get_bus_num();
-
-	if (i2c_set_bus_num(M41ST85W_I2C_BUS)) {
-		M41ST85W_ERROR("unable to set i2c bus\n");
-		goto out;
-	}
-
-	/* ensure ST (stop) and HT (halt update) bits are cleared */
-	m41st85w_clear_bit(M41ST85W_REG_SEC2, M41ST85W_REG_SEC2_ST, "ST");
-	m41st85w_clear_bit(M41ST85W_REG_ALHOUR, M41ST85W_REG_ALHOUR_HT, "HT");
-
-out:
-	/* reset the i2c bus */
-	i2c_set_bus_num(bus);
-}
-
-int board_early_init_r(void)
-{
-	start_rtc();
-	return 0;
-}
-
-#define M41ST85W_REG_WATCHDOG		0x09
-#define M41ST85W_REG_WATCHDOG_WDS	0x80
-#define M41ST85W_REG_WATCHDOG_BMB0	0x04
-
-void board_reset(void)
-{
-	u8 data = M41ST85W_REG_WATCHDOG_WDS | M41ST85W_REG_WATCHDOG_BMB0;
-
-	/* set the hardware watchdog timeout to 1/16 second, then hang */
-	i2c_set_bus_num(M41ST85W_I2C_BUS);
-	i2c_write(M41ST85W_I2C_ADDR, M41ST85W_REG_WATCHDOG, 1, &data, 1);
-
-	while (1)
-		/* hang */;
-}
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-#if defined(CONFIG_PCI)
-	ft_pci_board_setup(blob);
-#endif
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/p2020come/tlb.c b/board/freescale/p2020come/tlb.c
deleted file mode 100644
index 08a1e3433a..0000000000
--- a/board/freescale/p2020come/tlb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-#if defined(CONFIG_PCI)
-	/* *I*G* - PCI3 - PCI2 0x8000,0000 - 0xbfff,ffff, size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 2, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI1 0xC000,0000 - 0xcfff,ffff, size = 256M */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_VIRT,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 3, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI1  0xD000,0000 - 0xDFFF,FFFF, size = 256M */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
-			CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * *I*G* - PCI I/O
-	 *
-	 * PCI3 => 0xFFC10000
-	 * PCI2 => 0xFFC2,0000
-	 * PCI1 => 0xFFC3,0000
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_256K, 1),
-#endif /* #if defined(CONFIG_PCI) */
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
-	/* *I*G - DDR3  2G     Part 1: 0 - 0x3fff,ffff , size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/*        DDR3  2G     Part 2: 0x4000,0000 - 0x7fff,ffff , size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-			CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 7, BOOKE_PAGESZ_256K, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/P2020COME_SDCARD_defconfig b/configs/P2020COME_SDCARD_defconfig
deleted file mode 100644
index c186fcbee0..0000000000
--- a/configs/P2020COME_SDCARD_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P2020COME=y
diff --git a/configs/P2020COME_SPIFLASH_defconfig b/configs/P2020COME_SPIFLASH_defconfig
deleted file mode 100644
index 17ce1361b8..0000000000
--- a/configs/P2020COME_SPIFLASH_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P2020COME=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f436a8e226..5733c5a2e4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+P2020COME        powerpc     mpc85xx        -           -           Ira W. Snyder <iws@ovro.caltech.edu>
 P2020RDB         powerpc     mpc85xx        -           -           Poonam Aggrwal <poonam.aggrwal@freescale.com>
 P2010RDB         powerpc     mpc85xx        -           -
 P1020RDB         powerpc     mpc85xx        -           -
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
deleted file mode 100644
index d414b84dd2..0000000000
--- a/include/configs/P2020COME.h
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * Copyright 2009-2010,2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* The P2020COME board is only booted via the Freescale On-Chip ROM */
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-
-#define CONFIG_SYS_TEXT_BASE		0xf8f80000
-#define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD		1
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH		1
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500		1	/* BOOKE e500 family */
-#define CONFIG_P2020		1
-#define CONFIG_P2020COME	1
-#define CONFIG_FSL_ELBC		1	/* Enable eLBC Support */
-#define CONFIG_MP
-
-#define CONFIG_PCI		1	/* Enable PCI/PCIE */
-#if defined(CONFIG_PCI)
-#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controller 3 (slot 3) */
-
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
-#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-#endif /* #if defined(CONFIG_PCI) */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_PCI)
-#define CONFIG_E1000		1	/* E1000 pci Ethernet card */
-#endif
-
-#ifndef __ASSEMBLY__
-extern unsigned long get_board_ddr_clk(unsigned long dummy);
-extern unsigned long get_board_sys_clk(unsigned long dummy);
-#endif
-
-/*
- * For P2020COME DDRCLK and SYSCLK are from the same oscillator
- * For DA phase the SYSCLK is 66MHz
- * For EA phase the SYSCLK is 100MHz
- */
-#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
-#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch prediction */
-
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
-
-#define CONFIG_ENABLE_36BIT_PHYS	1
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP			1
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x1fffffff
-#define CONFIG_PANIC_HANG	/* do not reset board on panic */
-
- /*
-  * Config the L2 Cache as L2 SRAM
-  */
-#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	0xff8f80000ull
-#else
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
-#endif
-#define CONFIG_SYS_L2_SIZE		(512 << 10)
-#define CONFIG_SYS_INIT_L2_END		(CONFIG_SYS_INIT_L2_ADDR \
-					+ CONFIG_SYS_L2_SIZE)
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#define CONFIG_DDR_SPD
-
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-
-#define CONFIG_SYS_SDRAM_SIZE		2048ULL	/* DDR size on P2020COME */
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-#define CONFIG_SYS_DDR_ERR_INT_EN	0x0000000d
-#define CONFIG_SYS_DDR_ERR_DIS		0x00000000
-#define CONFIG_SYS_DDR_SBE		0x00ff0000
-
-#define CONFIG_SYS_SPD_BUS_NUM		1
-#define SPD_EEPROM_ADDRESS		0x53
-
-/*
- * Memory map
- *
- * 0x0000_0000	0x7fff_ffff	DDR3			2G Cacheable
- * 0x8000_0000	0x9fff_ffff	PCI Express 3 Mem	1G non-cacheable
- * 0xa000_0000	0xbfff_ffff	PCI Express 2 Mem	1G non-cacheable
- * 0xc000_0000	0xdfff_ffff	PCI Express 1 Mem	1G non-cacheable
- * 0xffc1_0000	0xffc1_ffff	PCI Express 3 IO	64K non-cacheable
- * 0xffc2_0000	0xffc2_ffff	PCI Express 2 IO	64K non-cacheable
- * 0xffc3_0000	0xffc3_ffff	PCI Express 1 IO	64K non-cacheable
- *
- * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
- * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-
-/* There is no NOR Flash on P2020COME */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
-#define CONFIG_HWCONFIG
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	CONFIG_SYS_INIT_RAM_ADDR
-/* the assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
-	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
-	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
-						- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
-
-#define CONFIG_SYS_BAUDRATE_TABLE   \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/* new uImage format support */
-#define CONFIG_FIT			1
-#define CONFIG_FIT_VERBOSE		1
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-
-/*
- * I2C2 EEPROM
- */
-#define CONFIG_ID_EEPROM
-#ifdef CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR2	0x18
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10 /* and takes up to 10 msec */
-
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		10000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#if defined(CONFIG_PCI)
-
-/* controller 3, Slot 3, tgtid 3, Base address 8000 */
-#define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000  /* 512M */
-#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xffc10000
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000  /* 64k */
-
-/* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000  /* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc20000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc20000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000  /* 64k */
-
-/* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000  /* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc30000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc30000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000  /* 64k */
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-#undef CONFIG_RTL8139
-
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)		(x)
-#define _IO_BASE		0x00000000
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
-
-#endif	/* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII		1	/* MII PHY management */
-#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
-#define CONFIG_TSEC1		1
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2		1
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-#define CONFIG_TSEC3		1
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		2
-#define TSEC3_PHY_ADDR		1
-
-#undef CONFIG_VSC7385_ENET
-
-#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#if defined(CONFIG_RAMBOOT_SDCARD)
-	#define CONFIG_ENV_IS_IN_MMC	1
-	#define CONFIG_FSL_FIXED_MMC_LOCATION
-	#define CONFIG_ENV_SIZE		0x2000
-	#define CONFIG_SYS_MMC_ENV_DEV	0
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
-	#define CONFIG_ENV_IS_IN_SPI_FLASH
-	#define CONFIG_ENV_SPI_BUS	0
-	#define CONFIG_ENV_SPI_CS	0
-	#define CONFIG_ENV_SPI_MAX_HZ	10000000
-	#define CONFIG_ENV_SPI_MODE	0
-	#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
-	#define CONFIG_ENV_SECT_SIZE	0x10000
-	#define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO		1
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#define CONFIG_MMC	1
-
-#ifdef CONFIG_MMC
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#endif /* CONFIG_MMC */
-
-#define CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI
-
-#ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
-#endif
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
-/* Misc Extra Settings */
-#define CONFIG_CMD_DHCP			1
-
-#define CONFIG_CMD_DATE			1
-#define CONFIG_RTC_M41T62		1
-#define CONFIG_SYS_RTC_BUS_NUM		1
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-						/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#endif
-
-#define CONFIG_HOSTNAME		unknown
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"hwconfig=fsl_ddr:ecc=on\0"					\
-	"bootcmd=run sdboot\0"						\
-	"sdboot=setenv bootargs root=/dev/mmcblk0p2 rw "		\
-		"rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
-		"$othbootargs; mmcinfo; "				\
-		"ext2load mmc 0:2 $loadaddr /boot/$bootfile; "		\
-		"ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; "		\
-		"bootm $loadaddr - $fdtaddr\0"				\
-	"sdfatboot=setenv bootargs root=/dev/ram rw "			\
-		"rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
-		"$othbootargs; mmcinfo; "				\
-		"fatload mmc 0:1 $loadaddr $bootfile; "			\
-		"fatload mmc 0:1 $fdtaddr $fdtfile; "			\
-		"fatload mmc 0:1 $ramdiskaddr $ramdiskfile; "		\
-		"bootm $loadaddr $ramdiskaddr $fdtaddr\0"		\
-	"usbboot=setenv bootargs root=/dev/sda1 rw "			\
-		"rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\
-		"$othbootargs; "					\
-		"usb start; "						\
-		"ext2load usb 0:1 $loadaddr /boot/$bootfile; "		\
-		"ext2load usb 0:1 $fdtaddr /boot/$fdtfile; "		\
-		"bootm $loadaddr - $fdtaddr\0"				\
-	"usbfatboot=setenv bootargs root=/dev/ram rw "			\
-		"console=$consoledev,$baudrate $othbootargs; "		\
-		"usb start; "						\
-		"fatload usb 0:2 $loadaddr $bootfile; "			\
-		"fatload usb 0:2 $fdtaddr $fdtfile; "			\
-		"fatload usb 0:2 $ramdiskaddr $ramdiskfile; "		\
-		"bootm $loadaddr $ramdiskaddr $fdtaddr\0"		\
-	"usbext2boot=setenv bootargs root=/dev/ram rw "			\
-		"console=$consoledev,$baudrate $othbootargs; "		\
-		"usb start; "						\
-		"ext2load usb 0:4 $loadaddr $bootfile; "		\
-		"ext2load usb 0:4 $fdtaddr $fdtfile; "			\
-		"ext2load usb 0:4 $ramdiskaddr $ramdiskfile; "		\
-		"bootm $loadaddr $ramdiskaddr $fdtaddr\0"		\
-	"upgradespi=sf probe 0; "					\
-		"setenv startaddr 0; "					\
-		"setenv erasesize a0000; "				\
-		"tftp 1000000 $tftppath/$uboot_spi; "			\
-		"sf erase $startaddr $erasesize; "			\
-		"sf write 1000000 $startaddr $filesize; "		\
-		"sf erase 100000 120000\0"				\
-	"clearspienv=sf probe 0;sf erase 100000 20000\0"		\
-	"othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0"	\
-	"netdev=eth0\0"							\
-	"rootdelaysecond=15\0"						\
-	"uboot_nor=u-boot-nor.bin\0"					\
-	"uboot_spi=u-boot-p2020.spi\0"					\
-	"uboot_sd=u-boot-p2020.bin\0"					\
-	"consoledev=ttyS0\0"						\
-	"ramdiskaddr=2000000\0"						\
-	"ramdiskfile=rootfs-dev.ext2.img\0"				\
-	"fdtaddr=c00000\0"						\
-	"fdtfile=uImage-2.6.32-p2020.dtb\0"				\
-	"tftppath=p2020\0"
-
-#define CONFIG_HDBOOT							\
-	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "		\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"usb start;"							\
-	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"			\
-	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-	"nfsroot=$serverip:$rootpath "					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"tftp $loadaddr $tftppath/$bootfile;"				\
-	"tftp $fdtaddr $tftppath/$fdtfile;"				\
-	"bootm $loadaddr - $fdtaddr"
-
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"tftp $ramdiskaddr $tftppath/$ramdiskfile;"			\
-	"tftp $loadaddr $tftppath/$bootfile;"				\
-	"tftp $fdtaddr $tftppath/$fdtfile;"				\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT
-
-#endif  /* __CONFIG_H */