diff options
author | Evan Wang <xswang@marvell.com> | 2020-08-19 16:19:39 +0200 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2020-08-31 14:45:53 +0200 |
commit | 91b85e25b610db0d3bdfc5e91df451f07bc9c851 (patch) | |
tree | f6966cbc17a2081832f6bc8c6c138fc3d5690665 | |
parent | 828d32621686aec593076d16445d39b9b8d49c05 (diff) |
mmc: xenon: set signal voltage and max base clock
- The SDIO signal voltage and max base clock frequency
setting are missing in driver, which causes SDIO
not working.
- The patch adds SDIO signal voltage switch support,
which is based on regulator-gpio of vqmmc-supply, and
sets the max base clock frequency.
- Fix the zero clock value in call to sdhci_setup_cfg()
function.
Change-Id: I79c8860c65b8db166f4f70db56ede4097f71f1fa
Signed-off-by: Evan Wang <xswang@marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/53589
Reviewed-by: Hua Jing <jinghua@marvell.com>
Tested-by: Hua Jing <jinghua@marvell.com>
[pali: Amended fixup patch]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Andre Heider <a.heider@gmail.com>
-rw-r--r-- | drivers/mmc/xenon_sdhci.c | 79 |
1 files changed, 78 insertions, 1 deletions
diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c index 356dd9846d..7f9a579c83 100644 --- a/drivers/mmc/xenon_sdhci.c +++ b/drivers/mmc/xenon_sdhci.c @@ -22,6 +22,7 @@ #include <linux/libfdt.h> #include <malloc.h> #include <sdhci.h> +#include <power/regulator.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +43,14 @@ DECLARE_GLOBAL_DATA_PTR; #define SDHC_SYS_EXT_OP_CTRL 0x010C #define MASK_CMD_CONFLICT_ERROR BIT(8) +#define SDHC_SLOT_EMMC_CTRL 0x0130 +#define ENABLE_DATA_STROBE_SHIFT 24 +#define SET_EMMC_RSTN_SHIFT 16 +#define EMMC_VCCQ_MASK 0x3 +#define EMMC_VCCQ_1_8V 0x1 +#define EMMC_VCCQ_1_2V 0x2 +#define EMMC_VCCQ_3_3V 0x3 + #define SDHC_SLOT_RETUNING_REQ_CTRL 0x0144 /* retuning compatible */ #define RETUNING_COMPATIBLE 0x1 @@ -108,6 +117,8 @@ DECLARE_GLOBAL_DATA_PTR; #define MMC_TIMING_MMC_HS400 10 #define XENON_MMC_MAX_CLK 400000000 +#define XENON_MMC_3V3_UV 3300000 +#define XENON_MMC_1V8_UV 1800000 enum soc_pad_ctrl_type { SOC_PAD_SD, @@ -128,6 +139,8 @@ struct xenon_sdhci_priv { void *pad_ctrl_reg; int pad_type; + + struct udevice *vqmmc; }; static int xenon_mmc_phy_init(struct sdhci_host *host) @@ -208,6 +221,51 @@ static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host) writel(ARMADA_3700_SOC_PAD_3_3V, priv->pad_ctrl_reg); } +static int xenon_mmc_start_signal_voltage_switch(struct sdhci_host *host) +{ + struct xenon_sdhci_priv *priv = host->mmc->priv; + u8 voltage; + u32 ctrl; + int ret = 0; + + /* If there is no vqmmc regulator, return */ + if (!priv->vqmmc) + return 0; + + if (priv->pad_type == SOC_PAD_FIXED_1_8V) { + /* Switch to 1.8v */ + ret = regulator_set_value(priv->vqmmc, + XENON_MMC_1V8_UV); + } else if (priv->pad_type == SOC_PAD_SD) { + /* Get voltage info */ + voltage = sdhci_readb(host, SDHCI_POWER_CONTROL); + voltage &= ~SDHCI_POWER_ON; + + if (voltage == SDHCI_POWER_330) { + /* Switch to 3.3v */ + ret = regulator_set_value(priv->vqmmc, + XENON_MMC_3V3_UV); + } else { + /* Switch to 1.8v */ + ret = regulator_set_value(priv->vqmmc, + XENON_MMC_1V8_UV); + } + } + + /* Set VCCQ, eMMC mode: 1.8V; SD/SDIO mode: 3.3V */ + ctrl = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL); + if (IS_SD(host->mmc)) + ctrl |= EMMC_VCCQ_3_3V; + else + ctrl |= EMMC_VCCQ_1_8V; + sdhci_writel(host, ctrl, SDHC_SLOT_EMMC_CTRL); + + if (ret) + printf("Signal voltage switch fail\n"); + + return ret; +} + static void xenon_mmc_phy_set(struct sdhci_host *host) { struct xenon_sdhci_priv *priv = host->mmc->priv; @@ -334,6 +392,13 @@ static int xenon_sdhci_set_ios_post(struct sdhci_host *host) uint speed = host->mmc->tran_speed; int pwr_18v = 0; + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) + xenon_mmc_start_signal_voltage_switch(host); + if ((sdhci_readb(host, SDHCI_POWER_CONTROL) & ~SDHCI_POWER_ON) == SDHCI_POWER_180) pwr_18v = 1; @@ -394,6 +459,18 @@ static int xenon_sdhci_probe(struct udevice *dev) /* Set default timing */ priv->timing = MMC_TIMING_LEGACY; + /* Get the vqmmc regulator if there is */ + device_get_supply_regulator(dev, "vqmmc-supply", &priv->vqmmc); + /* Set the initial voltage value to 3.3V if there is regulator */ + if (priv->vqmmc) { + ret = regulator_set_value(priv->vqmmc, + XENON_MMC_3V3_UV); + if (ret) { + printf("Failed to set VQMMC regulator to 3.3V\n"); + return ret; + } + } + /* Disable auto clock gating during init */ xenon_mmc_set_acg(host, false); @@ -426,7 +503,7 @@ static int xenon_sdhci_probe(struct udevice *dev) host->ops = &xenon_sdhci_ops; host->max_clk = XENON_MMC_MAX_CLK; - ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0); + ret = sdhci_setup_cfg(&plat->cfg, host, XENON_MMC_MAX_CLK, 0); if (ret) return ret; |