Merge branch 'master-sync' of git://git.denx.de/u-boot-arm

author: Wolfgang Denk <wd@denx.de> 2009-10-24 22:26:09 +0200
committer: Wolfgang Denk <wd@denx.de> 2009-10-24 22:26:09 +0200
commit: 922754cc82a82ac90e486b7565a148c9e4b6b584 (patch)
tree: 7f42bd45ddc7ba92343446af911a4ac5d71cc874
parent: 4ee63268152594bb7af6bec2b59d53bba68082bf (diff)
parent: 4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e (diff)
99 files changed, 6322 insertions, 2460 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 22976516e9..d70a9d22d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -612,6 +612,13 @@ Sergey Kubushyn <ksi@koi8.net>
 	SONATA		ARM926EJS
 	SCHMOOGIE	ARM926EJS
 
+Sandeep Paulraj <s-paulraj@ti.com>
+
+	davinci_dm355evm	ARM926EJS
+	davinci_dm355leopard	ARM926EJS
+	davinci_dm365evm	ARM926EJS
+	davinci_dm6467evm	ARM926EJS
+
 Prakash Kumar <prakash@embedx.com>
 
 	cerf250		xscale
@@ -628,6 +635,7 @@ Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 
 Nishanth Menon <nm@ti.com>
 
+	omap3_sdp3430	ARM CORTEX-A8 (OMAP3xx SoC)
 	omap3_zoom1	ARM CORTEX-A8 (OMAP3xx SoC)
 
 David M�ller <d.mueller@elsoft.ch>
@@ -735,6 +743,10 @@ Alex Z�pke <azu@sysgo.de>
 	lart		SA1100
 	dnp1110		SA1110
 
+Minkyu Kang <mk7.kang@samsung.com>
+
+	SMDKC100	ARM CORTEX-A8 (S5PC100 SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 07d24146f2..d63c5c2167 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -579,6 +579,8 @@ LIST_ARM9="			\
 	davinci_sffsdr		\
 	davinci_sonata		\
 	davinci_dm355evm	\
+	davinci_dm355leopard	\
+	davinci_dm6467evm	\
 "
 
 #########################################################################
@@ -615,8 +617,10 @@ LIST_ARM_CORTEX_A8="		\
 	omap3_overo		\
 	omap3_evm		\
 	omap3_pandora		\
+	omap3_sdp3430		\
 	omap3_zoom1		\
 	omap3_zoom2		\
+	smdkc100		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index bed9469286..a69e6d5b60 100644
--- a/Makefile
+++ b/Makefile
@@ -2942,9 +2942,15 @@ davinci_sonata_config :	unconfig
 davinci_dm355evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
 
+davinci_dm355leopard_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
+
 davinci_dm365evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
 
+davinci_dm6467evm_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+
 imx27lite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
 
@@ -3153,12 +3159,18 @@ omap3_evm_config :	unconfig
 omap3_pandora_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
 
+omap3_sdp3430_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
+
 omap3_zoom1_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
 
 omap3_zoom2_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
 
+smdkc100_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
+
 #########################################################################
 ## XScale Systems
 #########################################################################
diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c
index 0a44748320..87f284c4ce 100644
--- a/board/davinci/dm355evm/dm355evm.c
+++ b/board/davinci/dm355evm/dm355evm.c
@@ -92,8 +92,8 @@ int board_eth_init(bd_t *bis)
 static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip	*this = mtd->priv;
-	u32			wbase = (u32) this->IO_ADDR_W;
-	u32			rbase = (u32) this->IO_ADDR_R;
+	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
+	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
 
 	if (chip == 1) {
 		__set_bit(14, &wbase);
diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile
new file mode 100644
index 0000000000..26b0705465
--- /dev/null
+++ b/board/davinci/dm355leopard/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk
new file mode 100644
index 0000000000..d67df02ccf
--- /dev/null
+++ b/board/davinci/dm355leopard/config.mk
@@ -0,0 +1,6 @@
+# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c
new file mode 100644
index 0000000000..e89786ed1a
--- /dev/null
+++ b/board/davinci/dm355leopard/dm355leopard.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio_defs.h>
+#include <asm/arch/nand_defs.h>
+#include "../common/misc.h"
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	struct davinci_gpio *gpio01_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
+	struct davinci_gpio *gpio23_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK23;
+	struct davinci_gpio *gpio67_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
+
+	gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	/* GIO 9 & 10 are used for IO */
+	writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3);
+
+	/* Interrupt set GIO 9 */
+	writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN);
+
+	/* set GIO 9 input */
+	writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir);
+
+	/* Both edge trigger GIO 9 */
+	writel((readl(&gpio01_base->set_rising) | (1 << 9)),
+						&gpio01_base->set_rising);
+	writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir);
+
+	/* output low */
+	writel((readl(&gpio01_base->set_data) & ~(1 << 5)),
+						&gpio01_base->set_data);
+
+	/* set GIO 10 output */
+	writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir);
+
+	/* output high */
+	writel((readl(&gpio01_base->set_data) | (1 << 10)),
+						&gpio01_base->set_data);
+
+	/* set GIO 32 output */
+	writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir);
+
+	/* output High */
+	writel((readl(&gpio23_base->set_data) | (1 << 0)),
+						&gpio23_base->set_data);
+
+	/* Enable UART1 MUX Lines */
+	writel((readl(PINMUX0) & ~3), PINMUX0);
+	writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir);
+	writel((readl(&gpio67_base->set_data) | (1 << 6)),
+						&gpio67_base->set_data);
+
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+int board_nand_init(struct nand_chip *nand)
+{
+	davinci_nand_init(nand);
+
+	return 0;
+}
+#endif
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
index 5b97060539..290eb99749 100644
--- a/board/davinci/dm365evm/dm365evm.c
+++ b/board/davinci/dm365evm/dm365evm.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2009 Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -79,8 +80,8 @@ int board_eth_init(bd_t *bis)
 static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip	*this = mtd->priv;
-	u32			wbase = (u32) this->IO_ADDR_W;
-	u32			rbase = (u32) this->IO_ADDR_R;
+	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
+	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
 
 	if (chip == 1) {
 		__set_bit(14, &wbase);
diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile
new file mode 100644
index 0000000000..26b0705465
--- /dev/null
+++ b/board/davinci/dm6467evm/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk
new file mode 100644
index 0000000000..ca801c2737
--- /dev/null
+++ b/board/davinci/dm6467evm/config.mk
@@ -0,0 +1,2 @@
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c
new file mode 100644
index 0000000000..960581824c
--- /dev/null
+++ b/board/davinci/dm6467evm/dm6467evm.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 0b4f0d450d..af8a4a2f89 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -165,7 +165,7 @@ int board_init(void)
 
 	/* arch number of the board */
 #if defined(CONFIG_CPU9G20)
-	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
+	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20;
 #elif defined(CONFIG_CPU9260)
 	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
 #endif
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index d9e2ae5021..dadbeb6730 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -50,9 +50,6 @@
  * The details of the setting of the serial gpmc setup are not available.
  * The values were provided by another party.
  */
-void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
-			u32 size);
-
 static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
 	0x00011000,
 	0x001F1F01,
@@ -129,7 +126,7 @@ int board_init (void)
 
 	/* Configure console support on zoom2 */
 	gpmc_config = gpmc_serial_TL16CP754C;
-	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[4],
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3],
 			SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
 
 	/* board id for Linux */
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 2b64f44879..4d8b579caa 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -73,8 +73,9 @@ static inline void delay(unsigned long loops)
 
 int board_init(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
@@ -174,7 +175,7 @@ static inline void NF_Init(void)
 void
 nand_init(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	NF_Init();
 #ifdef DEBUG
@@ -190,21 +191,21 @@ nand_init(void)
 
 static u8 Get_PLD_ID(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->ID);
 }
 
 static u8 Get_PLD_BOARD(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->BOARD);
 }
 
 static u8 Get_PLD_SDRAM(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->SDRAM);
 }
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index 220b7053ba..f46e0e4c58 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -39,14 +39,14 @@ typedef enum {
 
 static inline void NF_Conf(u16 conf)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCONF = conf;
 }
 
 static inline void NF_Cmd(u8 cmd)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCMD = cmd;
 }
@@ -59,14 +59,14 @@ static inline void NF_CmdW(u8 cmd)
 
 static inline void NF_Addr(u8 addr)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFADDR = addr;
 }
 
 static inline void NF_SetCE(NFCE_STATE s)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	switch (s) {
 		case NFCE_LOW:
@@ -81,35 +81,35 @@ static inline void NF_SetCE(NFCE_STATE s)
 
 static inline void NF_WaitRB(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	while (!(nand->NFSTAT & (1<<0)));
 }
 
 static inline void NF_Write(u8 data)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFDATA = data;
 }
 
 static inline u8 NF_Read(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	return(nand->NFDATA);
 }
 
 static inline void NF_Init_ECC(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCONF |= (1<<12);
 }
 
 static inline u32 NF_Read_ECC(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	return(nand->NFECC);
 }
@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD *VCMA9_get_base_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
index 2c47063e95..42bf00868d 100644
--- a/board/samsung/smdk2400/smdk2400.c
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -46,8 +46,9 @@ extern int do_mdm_init; /* defined in common/main.c */
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* memory and cpu-speed are setup before relocation */
 	/* change the clock to be 50 MHz 1:1:1 */
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
index 25c38e67e9..fde7730930 100644
--- a/board/samsung/smdk2410/smdk2410.c
+++ b/board/samsung/smdk2410/smdk2410.c
@@ -68,8 +68,9 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
diff --git a/board/samsung/smdkc100/Makefile b/board/samsung/smdkc100/Makefile
new file mode 100644
index 0000000000..808d0dd0c6
--- /dev/null
+++ b/board/samsung/smdkc100/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	:= smdkc100.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND)	+= onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk
new file mode 100644
index 0000000000..ebab420815
--- /dev/null
+++ b/board/samsung/smdkc100/config.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2008 # Samsung Elecgtronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+
+# On S5PC100 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x38000000 to 0x40000000 (128MiB)
+#
+# On S5PC110 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x40000000 to 0x48000000 (128MiB)
+#
+TEXT_BASE = 0x34800000
diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S
new file mode 100644
index 0000000000..32572c51da
--- /dev/null
+++ b/board/samsung/smdkc100/lowlevel_init.S
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r9, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r8, =S5PC100_GPIO_BASE
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC100_WATCHDOG_BASE		@0xEA200000
+	orr	r0, r0, #0x0
+	str	r5, [r0]
+
+#ifndef CONFIG_ONENAND_IPL
+	/* setting SRAM */
+	ldr	r0, =S5PC100_SROMC_BASE
+	ldr	r1, =0x9
+	str	r1, [r0]
+#endif
+
+	/* S5PC100 has 3 groups of interrupt sources */
+	ldr	r0, =S5PC100_VIC0_BASE			@0xE4000000
+	ldr	r1, =S5PC100_VIC1_BASE			@0xE4000000
+	ldr	r2, =S5PC100_VIC2_BASE			@0xE4000000
+
+	/* Disable all interrupts (VIC0, VIC1 and VIC2) */
+	mvn	r3, #0x0
+	str	r3, [r0, #0x14]				@INTENCLEAR
+	str	r3, [r1, #0x14]				@INTENCLEAR
+	str	r3, [r2, #0x14]				@INTENCLEAR
+
+#ifndef CONFIG_ONENAND_IPL
+	/* Set all interrupts as IRQ */
+	str	r5, [r0, #0xc]				@INTSELECT
+	str	r5, [r1, #0xc]				@INTSELECT
+	str	r5, [r2, #0xc]				@INTSELECT
+
+	/* Pending Interrupt Clear */
+	str	r5, [r0, #0xf00]			@INTADDRESS
+	str	r5, [r1, #0xf00]			@INTADDRESS
+	str	r5, [r2, #0xf00]			@INTADDRESS
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+	/* for UART */
+	bl uart_asm_init
+
+	/* for TZPC */
+	bl tzpc_asm_init
+#endif
+
+#ifdef CONFIG_ONENAND_IPL
+	/* init system clock */
+	bl	system_clock_init
+
+	bl	mem_ctrl_asm_init
+
+	/* Wakeup support. Don't know if it's going to be used, untested. */
+	ldr	r0, =S5PC100_RST_STAT
+	ldr	r1, [r0]
+	bic	r1, r1, #0xfffffff7
+	cmp	r1, #0x8
+	beq	wakeup_reset
+#endif
+
+1:
+	mov	lr, r9
+	mov	pc, lr
+
+#ifdef CONFIG_ONENAND_IPL
+wakeup_reset:
+
+	/* Clear wakeup status register */
+	ldr	r0, =S5PC100_WAKEUP_STAT
+	ldr	r1, [r0]
+	str	r1, [r0]
+
+	/* Load return address and jump to kernel */
+	ldr	r0, =S5PC100_INFORM0
+
+	/* r1 = physical address of s5pc100_cpu_resume function */
+	ldr	r1, [r0]
+
+	/* Jump to kernel (sleep.S) */
+	mov	pc, r1
+	nop
+	nop
+#endif
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+	ldr	r8, =S5PC1XX_CLOCK_BASE		@ 0xE0100000
+
+	/* Set Clock divider */
+	ldr	r1, =0x00011110
+	str	r1, [r8, #0x304]
+	ldr	r1, =0x1
+	str	r1, [r8, #0x308]
+	ldr	r1, =0x00011301
+	str	r1, [r8, #0x300]
+
+	/* Set Lock Time */
+	ldr	r1, =0xe10			@ Locktime : 0xe10 = 3600
+	str	r1, [r8, #0x000]		@ APLL_LOCK
+	str	r1, [r8, #0x004]		@ MPLL_LOCK
+	str	r1, [r8, #0x008]		@ EPLL_LOCK
+	str	r1, [r8, #0x00C]		@ HPLL_LOCK
+
+	/* APLL_CON */
+	ldr	r1, =0x81bc0400		@ SDIV 0, PDIV 4, MDIV 444 (1332MHz)
+	str	r1, [r8, #0x100]
+	/* MPLL_CON */
+	ldr	r1, =0x80590201		@ SDIV 1, PDIV 2, MDIV 89 (267MHz)
+	str	r1, [r8, #0x104]
+	/* EPLL_CON */
+	ldr	r1, =0x80870303		@ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
+	str	r1, [r8, #0x108]
+	/* HPLL_CON */
+	ldr	r1, =0x80600603
+	str	r1, [r8, #0x10C]
+
+	/* Set Source Clock */
+	ldr	r1, =0x1111			@ A, M, E, HPLL Muxing
+	str	r1, [r8, #0x200]		@ CLK_SRC0
+
+	ldr	r1, =0x1000001			@ Uart Clock & CLK48M Muxing
+	str	r1, [r8, #0x204]		@ CLK_SRC1
+
+	ldr	r1, =0x9000			@ ARMCLK/4
+	str	r1, [r8, #0x400]		@ CLK_OUT
+
+	/* wait at least 200us to stablize all clock */
+	mov	r2, #0x10000
+1:	subs	r2, r2, #1
+	bne	1b
+
+	mov	pc, lr
+
+#ifndef CONFIG_ONENAND_IPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	mov	r0, r8
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x0]			@ GPA0_CON
+	ldr	r1, =0x00022222
+	str	r1, [r0, #0x20]			@ GPA1_CON
+
+	mov	pc, lr
+
+/*
+ * tzpc_asm_init: Initialize TZPC
+ */
+tzpc_asm_init:
+	ldr	r0, =0xE3800000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+
+	ldr	r0, =0xE2800000
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+	str	r1, [r0, #0x81C]
+
+	ldr	r0, =0xE2900000
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+
+	mov	pc, lr
+#endif
diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S
new file mode 100644
index 0000000000..94a701d428
--- /dev/null
+++ b/board/samsung/smdkc100/mem_setup.S
@@ -0,0 +1,197 @@
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx
+ *
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Inki Dae <inki.dae@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+	.globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+	ldr	r6, =S5PC100_DMC_BASE			@ 0xE6000000
+
+	/* DLL parameter setting */
+	ldr	r1, =0x50101000
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+	ldr	r1, =0xf4
+	str	r1, [r6, #0x01C]			@ PHYCONTROL1
+	ldr	r1, =0x0
+	str	r1, [r6, #0x020]			@ PHYCONTROL2
+
+	/* DLL on */
+	ldr	r1, =0x50101002
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* DLL start */
+	ldr	r1, =0x50101003
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* Force value locking for DLL off */
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* DLL off */
+	ldr	r1, =0x50101001
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* auto refresh off */
+	ldr	r1, =0xff001010
+	str	r1, [r6, #0x000]			@ CONCONTROL
+
+	/*
+	 * Burst Length 4, 2 chips, 32-bit, LPDDR
+	 * OFF: dynamic self refresh, force precharge, dynamic power down off
+	 */
+	ldr	r1, =0x00212100
+	str	r1, [r6, #0x004]			@ MEMCONTROL
+
+	/*
+	 * Note:
+	 * If Bank0 has OneDRAM we place it at 0x2800'0000
+	 * So finally Bank1 should address start at at 0x2000'0000
+	 */
+	mov	r4, #0x0
+
+swap_memory:
+	/*
+	 * Bank0
+	 * 0x30 -> 0x30000000
+	 * 0xf8 -> 0x37FFFFFF
+	 * [15:12] 0: Linear
+	 * [11:8 ] 2: 9 bits
+	 * [ 7:4 ] 2: 14 bits
+	 * [ 3:0 ] 2: 4 banks
+	 */
+	ldr	r1, =0x30f80222
+	/* if r4 is 1, swap the bank */
+	cmp	r4, #0x1
+	orreq	r1, r1, #0x08000000
+	str	r1, [r6, #0x008]			@ MEMCONFIG0
+
+	/*
+	 * Bank1
+	 * 0x38 -> 0x38000000
+	 * 0xf8 -> 0x3fFFFFFF
+	 * [15:12] 0: Linear
+	 * [11:8 ] 2: 9 bits
+	 * [ 7:4 ] 2: 14 bits
+	 * [ 3:0 ] 2: 4 banks
+	 */
+	ldr	r1, =0x38f80222
+	/* if r4 is 1, swap the bank */
+	cmp	r4, #0x1
+	biceq	r1, r1, #0x08000000
+	str	r1, [r6, #0x00c]			@ MEMCONFIG1
+
+	ldr	r1, =0x20000000
+	str	r1, [r6, #0x014]			@ PRECHCONFIG
+
+	/*
+	 * FIXME: Please verify these values
+	 * 7.8us * 166MHz %LE %LONG1294(0x50E)
+	 * 7.8us * 133MHz %LE %LONG1038(0x40E),
+	 * 7.8us * 100MHz %LE %LONG780(0x30C),
+	 * 7.8us * 20MHz  %LE %LONG156(0x9C),
+	 * 7.8us * 10MHz  %LE %LONG78(0x4E)
+	 */
+	ldr	r1, =0x0000050e
+	str	r1, [r6, #0x030]			@ TIMINGAREF
+
+	/* 166 MHz */
+	ldr	r1, =0x0c233287
+	str	r1, [r6, #0x034]			@ TIMINGROW
+
+	/* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */
+	ldr	r1, =0x32330303
+	str	r1, [r6, #0x038]			@ TIMINGDATA
+
+	/* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */
+	ldr	r1, =0x04141433
+	str	r1, [r6, #0x03C]			@ TIMINGPOWER
+
+	/* chip0 Deselect */
+	ldr	r1, =0x07000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 PALL */
+	ldr	r1, =0x01000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 REFA */
+	ldr	r1, =0x05000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+	/* chip0 REFA */
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+	ldr	r1, =0x00000032
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 Deselect */
+	ldr	r1, =0x07100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 PALL */
+	ldr	r1, =0x01100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 REFA */
+	ldr	r1, =0x05100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+	/* chip1 REFA */
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+	ldr	r1, =0x00100032
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* auto refresh on */
+	ldr	r1, =0xff002030
+	str	r1, [r6, #0x000]			@ CONCONTROL
+
+	/* PwrdnConfig */
+	ldr	r1, =0x00100002
+	str	r1, [r6, #0x028]			@ PWRDNCONFIG
+
+	/* BL%LE %LONG */
+	ldr	r1, =0xff212100
+	str	r1, [r6, #0x004]			@ MEMCONTROL
+
+
+	/* Try to test memory area */
+	cmp	r4, #0x1
+	beq	1f
+
+	mov	r4, #0x1
+	ldr	r1, =0x37ffff00
+	str	r4, [r1]
+	str	r4, [r1, #0x4]				@ dummy write
+	ldr	r0, [r1]
+	cmp	r0, r4
+	bne	swap_memory
+
+1:
+	mov	pc, lr
+
+	.ltorg
diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c
new file mode 100644
index 0000000000..c25869e5c4
--- /dev/null
+++ b/board/samsung/smdkc100/onenand.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <onenand_uboot.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	struct samsung_onenand *onenand;
+	int value;
+
+	this->base = (void *)S5PC100_ONENAND_BASE;
+	onenand = (struct samsung_onenand *)this->base;
+
+	/* D0 Domain memory clock gating */
+	value = readl(&clk->gate_d01);
+	value &= ~(1 << 2);		/* CLK_ONENANDC */
+	value |= (1 << 2);
+	writel(value, &clk->gate_d01);
+
+	value = readl(&clk->src0);
+	value &= ~(1 << 24);		/* MUX_1nand: 0 from HCLKD0 */
+	value &= ~(1 << 20);		/* MUX_HREF: 0 from FIN_27M */
+	writel(value, &clk->src0);
+
+	value = readl(&clk->div1);
+	value &= ~(3 << 16);		/* PCLKD1_RATIO */
+	value |= (1 << 16);
+	writel(value, &clk->div1);
+
+	writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset);
+
+	while (!(readl(&onenand->int_err_stat) & RST_CMP))
+		continue;
+
+	writel(RST_CMP, &onenand->int_err_ack);
+
+	/*
+	 * Access_Clock [2:0]
+	 * 166 MHz, 134 Mhz : 3
+	 * 100 Mhz, 60 Mhz  : 2
+	 */
+	writel(0x3, &onenand->acc_clock);
+
+	writel(INT_ERR_ALL, &onenand->int_err_mask);
+	writel(1 << 0, &onenand->int_pin_en);	/* Enable */
+
+	value = readl(&onenand->int_err_mask);
+	value &= ~RDY_ACT;
+	writel(value, &onenand->int_err_mask);
+
+	s3c_onenand_init(mtd);
+}
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
new file mode 100644
index 0000000000..15a1a27c36
--- /dev/null
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -0,0 +1,51 @@
+/*
+ *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+						PHYS_SDRAM_1_SIZE);
+
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("Board:\tSMDKC100\n");
+	return 0;
+}
+#endif
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
index 62768503ad..7452c1f945 100644
--- a/board/sbc2410x/sbc2410x.c
+++ b/board/sbc2410x/sbc2410x.c
@@ -75,8 +75,9 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
@@ -170,7 +171,7 @@ static inline void NF_Init(void)
 
 void nand_init(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	NF_Init();
 #ifdef DEBUG
diff --git a/board/ti/sdp3430/Makefile b/board/ti/sdp3430/Makefile
new file mode 100644
index 0000000000..2554c7b081
--- /dev/null
+++ b/board/ti/sdp3430/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= sdp.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk
new file mode 100644
index 0000000000..18e4761abd
--- /dev/null
+++ b/board/ti/sdp3430/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2006-2009
+# Texas Instruments Incorporated, <www.ti.com>
+#
+# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
new file mode 100644
index 0000000000..40cf26f42a
--- /dev/null
+++ b/board/ti/sdp3430/sdp.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "sdp.h"
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"OMAP3 SDP3430 board",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+	"OneNAND",
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+	"NAND",
+#else
+	"NOR",
+#endif
+};
+
+/* Timing definitions for GPMC controller for Sibley NOR */
+static const u32 gpmc_sdp_nor[] = {
+    SDP3430_NOR_GPMC_CONF1,
+    SDP3430_NOR_GPMC_CONF2,
+    SDP3430_NOR_GPMC_CONF3,
+    SDP3430_NOR_GPMC_CONF4,
+    SDP3430_NOR_GPMC_CONF5,
+    SDP3430_NOR_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/*
+ * Timing definitions for GPMC controller for Debug Board
+ * Debug board contains access to ethernet and DIP Switch setting
+ * information etc.
+ */
+static const u32 gpmc_sdp_debug[] = {
+    SDP3430_DEBUG_GPMC_CONF1,
+    SDP3430_DEBUG_GPMC_CONF2,
+    SDP3430_DEBUG_GPMC_CONF3,
+    SDP3430_DEBUG_GPMC_CONF4,
+    SDP3430_DEBUG_GPMC_CONF5,
+    SDP3430_DEBUG_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* Timing defintions for GPMC OneNAND */
+static const u32 gpmc_sdp_onenand[] = {
+    SDP3430_ONENAND_GPMC_CONF1,
+    SDP3430_ONENAND_GPMC_CONF2,
+    SDP3430_ONENAND_GPMC_CONF3,
+    SDP3430_ONENAND_GPMC_CONF4,
+    SDP3430_ONENAND_GPMC_CONF5,
+    SDP3430_ONENAND_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* GPMC definitions for GPMC NAND */
+static const u32 gpmc_sdp_nand[] = {
+    SDP3430_NAND_GPMC_CONF1,
+    SDP3430_NAND_GPMC_CONF2,
+    SDP3430_NAND_GPMC_CONF3,
+    SDP3430_NAND_GPMC_CONF4,
+    SDP3430_NAND_GPMC_CONF5,
+    SDP3430_NAND_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* gpmc_cfg is initialized by gpmc_init and we use it here */
+extern struct gpmc *gpmc_cfg;
+
+/**
+ * @brief board_init - gpmc and basic setup as phase1 of boot sequence
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* TODO: Dynamically pop out CS mapping and program accordingly */
+	/* Configure devices for default ON ON ON settings */
+	enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
+			CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
+	enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
+			GPMC_SIZE_16M);
+	enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
+			GPMC_SIZE_16M);
+	enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
+			GPMC_SIZE_16M);
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+#define LAN_RESET_REGISTER	(CONFIG_LAN91C96_BASE + 0x01c)
+#define ETH_CONTROL_REG		(CONFIG_LAN91C96_BASE + 0x30b)
+
+/**
+ * @brief ether_init Take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ */
+static void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+	int cnt = 20;
+
+	writew(0x0, LAN_RESET_REGISTER);
+	do {
+		writew(0x1, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0)
+			goto reset_err_out;
+		--cnt;
+	} while (readw(LAN_RESET_REGISTER) != 0x1);
+
+	cnt = 20;
+
+	do {
+		writew(0x0, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0)
+			goto reset_err_out;
+		--cnt;
+	} while (readw(LAN_RESET_REGISTER) != 0x0000);
+	udelay(1000);
+
+	writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
+	udelay(1000);
+reset_err_out:
+	return;
+
+#endif
+}
+
+/**
+ * @brief misc_init_r - Configure SDP board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	/* Partial setup:
+	 *   VAUX3 - 2.8V for DVI
+	 *   VPLL1 - 1.8V
+	 *   VDAC  - 1.8V
+	 * and turns on LEDA/LEDB (not needed ... NOP?)
+	 */
+	twl4030_power_init();
+
+	/* FIXME finish setup:
+	 *   VAUX1 - 2.8V for mainboard I/O
+	 *   VAUX2 - 2.8V for camera
+	 *   VAUX4 - 1.8V for OMAP3 CSI
+	 *   VMMC1 - 3.15V (init, variable) for MMC1
+	 *   VMMC2 - 1.85V for MMC2
+	 *   VSIM  - off (init, variable) for MMC1.DAT[3..7], SIM
+	 *   VPLL2 - 1.8V
+	 */
+	ether_init();
+
+	return 0;
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the hardware. Many pins need to be moved from protect
+ * to primary mode.
+ */
+void set_muxconf_regs(void)
+{
+	/* platform specific muxes */
+	MUX_SDP3430();
+}
diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h
new file mode 100644
index 0000000000..3526e94672
--- /dev/null
+++ b/board/ti/sdp3430/sdp.h
@@ -0,0 +1,417 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _BOARD_SDP_H_
+#define _BOARD_SDP_H_
+
+#define OFF_IN_PD	0
+#define OFF_OUT_PD	0
+
+/*
+ * IEN	- Input Enable
+ * IDIS	- Input Disable
+ * PTD	- Pull type Down
+ * PTU	- Pull type Up
+ * DIS	- Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_SDP3430()\
+	/*SDRC*/\
+	MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\
+	/*GPMC*/\
+	MUX_VAL(CP(GPMC_A1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D12), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D13), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D14), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D15), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NCS0), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS1), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS3), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS4), (OFF_IN_PD | IEN | PTU | EN | M4)) /*G55-F_DIS*/\
+	MUX_VAL(CP(GPMC_NCS5), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G56T_EN*/\
+	MUX_VAL(CP(GPMC_NCS6), (OFF_IN_PD | IEN | PTD | DIS | M4))/*G57-AGPSP*/\
+	MUX_VAL(CP(GPMC_NCS7), (OFF_IN_PD | IEN | PTU | EN | M4))/*G58-WLNIQ*/\
+	MUX_VAL(CP(GPMC_CLK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NADV_ALE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NOE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NWE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NBE0_CLE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NBE1), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*G61-BTST*/\
+	MUX_VAL(CP(GPMC_NWP), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_WAIT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_WAIT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_WAIT2), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_64*/\
+	MUX_VAL(CP(GPMC_WAIT3), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_65*/\
+	/*DSS*/\
+	MUX_VAL(CP(DSS_PCLK), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_HSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_VSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_ACBIAS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA0), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA11), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA12), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA13), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA14), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA15), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA16), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA17), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA18), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA19), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA20), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA21), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA22), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA23), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	/*CAMERA*/\
+	MUX_VAL(CP(CAM_HS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_VS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_XCLKA), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_PCLK), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_FLD), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G98-C_RST*/\
+	MUX_VAL(CP(CAM_D0), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D0 */\
+	MUX_VAL(CP(CAM_D1), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D1 */\
+	MUX_VAL(CP(CAM_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_XCLKB), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_WEN), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DX0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DY0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DX1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DY1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Audio InterfACe */\
+	MUX_VAL(CP(MCBSP2_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	/*Expansion Card */\
+	MUX_VAL(CP(MMC1_CLK), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT4), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT5), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT6), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT7), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	/*Wireless LAN */\
+	MUX_VAL(CP(MMC2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MMC2_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT4), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD0*/\
+	MUX_VAL(CP(MMC2_DAT5), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD1*/\
+	MUX_VAL(CP(MMC2_DAT6), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DCMD*/\
+	MUX_VAL(CP(MMC2_DAT7), (OFF_IN_PD | IEN | PTU | EN | M1))/*CLKIN*/\
+	/*Bluetooth*/\
+	MUX_VAL(CP(MCBSP3_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_CTS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(UART2_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Modem Interface */\
+	MUX_VAL(CP(UART1_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART1_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART1_CTS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
+	MUX_VAL(CP(UART1_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP4_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1DRX*/\
+	MUX_VAL(CP(MCBSP4_DR), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1FLGRX*/\
+	MUX_VAL(CP(MCBSP4_DX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1RDYRX*/\
+	MUX_VAL(CP(MCBSP4_FSX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1WAKE*/\
+	MUX_VAL(CP(MCBSP1_CLKR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_FSR), (OFF_OUT_PD | IDIS | PTU | EN | M4))/*G157BWP*/\
+	MUX_VAL(CP(MCBSP1_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP_CLKS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Serial Interface*/\
+	MUX_VAL(CP(UART3_CTS_RCTX), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(UART3_RTS_SD), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART3_RX_IRRX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(UART3_TX_IRTX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_STP), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(HSUSB0_DIR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_NXT), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/* NOTE db: removed off-mode from I2C 1/2/3 ... external pullups!! */\
+	MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(HDQ_SIO), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CS1), (OFF_OUT_PD | IDIS | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CS2), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G176*/\
+	MUX_VAL(CP(MCSPI1_CS3), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI2_CS1), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	/*Control and debug */\
+	MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_NIRQ), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(SYS_BOOT0), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G2PENIRQ*/\
+	MUX_VAL(CP(SYS_BOOT1), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G4MMC1WP*/\
+	MUX_VAL(CP(SYS_BOOT3), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G5LCDENV*/\
+	MUX_VAL(CP(SYS_BOOT4), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G6LANINT*/\
+	MUX_VAL(CP(SYS_BOOT5), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G7MMC2WP*/\
+	MUX_VAL(CP(SYS_BOOT6), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G8ENBKL*/\
+	MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\
+	MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_EMU0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_EMU1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_CLK_ES2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(ETK_CTL_ES2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D0_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD0*/\
+	MUX_VAL(CP(ETK_D1_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SPI3_CS0*/\
+	MUX_VAL(CP(ETK_D2_ES2), (OFF_IN_PD | IEN | PTD | EN | M1))/*USB1TLD2*/\
+	MUX_VAL(CP(ETK_D3_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD7*/\
+	MUX_VAL(CP(ETK_D4_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D5_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D6_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D7_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D8_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D9_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D10_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D11_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D12_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D13_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D14_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D15_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Die to Die */\
+	MUX_VAL(CP(D2D_MCAD0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD1), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD2), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD3), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD4), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD5), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD6), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD7), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD8), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD9), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD10), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD11), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD12), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD13), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD14), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD15), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD16), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD17), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD18), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD19), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD20), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD21), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD22), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD23), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD24), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD25), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD26), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD27), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD28), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD29), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD30), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD31), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD32), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD33), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD34), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD35), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD36), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_CLK26MI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_NRESPWRON), (OFF_OUT_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_NRESWARM), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_ARM9NIRQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_UMA2P6FIQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SPINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_FRINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_DMAREQ0), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ1), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ2), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ3), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTRST), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTDI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTDO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTMS), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTCK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GRTCK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MSTDBY), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_IDLEREQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_IDLEACK), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_MWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MBUSFLAG), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SBUSFLAG), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*SDRC_CKE1 NOT USED*/
+
+/*
+ * GPMC Timing definitions for SDP3430
+ * at L3 = 166Mhz
+ */
+
+/* Timing definitions for GPMC controller for Sibley NOR */
+#define SDP3430_NOR_GPMC_CONF1 0x00001200
+#define SDP3430_NOR_GPMC_CONF2 0x001F1F00
+#define SDP3430_NOR_GPMC_CONF3 0x00080802
+#define SDP3430_NOR_GPMC_CONF4 0x1C091C09
+#define SDP3430_NOR_GPMC_CONF5 0x01131F1F
+#define SDP3430_NOR_GPMC_CONF6 0x1F0F03C2
+
+/*
+ * Timing definitions for GPMC controller for Debug Board
+ * Debug board contains access to ethernet and DIP Switch setting
+ * information etc.
+ */
+#define SDP3430_DEBUG_GPMC_CONF1 0x00611200
+#define SDP3430_DEBUG_GPMC_CONF2 0x001F1F01
+#define SDP3430_DEBUG_GPMC_CONF3 0x00080803
+#define SDP3430_DEBUG_GPMC_CONF4 0x1D091D09
+#define SDP3430_DEBUG_GPMC_CONF5 0x041D1F1F
+#define SDP3430_DEBUG_GPMC_CONF6 0x1D0904C4
+
+/* Timing defintions for GPMC OneNAND */
+#define SDP3430_ONENAND_GPMC_CONF1 0x00001200
+#define SDP3430_ONENAND_GPMC_CONF2 0x000F0F01
+#define SDP3430_ONENAND_GPMC_CONF3 0x00030301
+#define SDP3430_ONENAND_GPMC_CONF4 0x0F040F04
+#define SDP3430_ONENAND_GPMC_CONF5 0x010F1010
+#define SDP3430_ONENAND_GPMC_CONF6 0x1F060000
+
+/* GPMC definitions for GPMC NAND */
+#define SDP3430_NAND_GPMC_CONF1 0x00000800
+#define SDP3430_NAND_GPMC_CONF2 0x00141400
+#define SDP3430_NAND_GPMC_CONF3 0x00141400
+#define SDP3430_NAND_GPMC_CONF4 0x0F010F01
+#define SDP3430_NAND_GPMC_CONF5 0x010C1414
+#define SDP3430_NAND_GPMC_CONF6 0x1F040A80
+
+#endif /* _BOARD_SDP_H_ */
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index ae6f7c6af8..04a36075b8 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -644,9 +644,9 @@ static int adc_read (unsigned int channel)
 {
 	int j = 1000; /* timeout value for wait loop in us */
 	int result;
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 	channel &= 0x7;
 
 	adc_init ();
@@ -686,9 +686,9 @@ static int adc_read (unsigned int channel)
 
 static void adc_init (void)
 {
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 
 	padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
 	padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -707,7 +707,7 @@ static void adc_init (void)
 
 static void led_set (unsigned int state)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	led_init ();
 
@@ -740,7 +740,7 @@ static void led_blink (void)
 
 static void led_init (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure GPA12 as output and set to High -> LED off */
 	gpio->PACON &= ~(1 << 12);
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index 97aea91c8e..7d5c0a2c9c 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -42,7 +42,7 @@ static void trab_rs485_disable_rx(void);
 
 static void rs485_setbrg (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 	int i;
 	unsigned int reg = 0;
 
@@ -67,7 +67,7 @@ static void rs485_setbrg (void)
 
 static void rs485_cfgio (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PFCON &= ~(0x3 << 2);
 	gpio->PFCON |=  (0x2 << 2); /* configure GPF1 as RXD1 */
@@ -101,7 +101,7 @@ int rs485_init (void)
  */
 int rs485_getc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for character to arrive */
 	while (!(uart->UTRSTAT & 0x1));
@@ -114,7 +114,7 @@ int rs485_getc (void)
  */
 void rs485_putc (const char c)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for room in the tx FIFO */
 	while (!(uart->UTRSTAT & 0x2));
@@ -131,7 +131,7 @@ void rs485_putc (const char c)
  */
 int rs485_tstc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	return uart->UTRSTAT & 0x1;
 }
@@ -168,7 +168,7 @@ static void set_rs485re(unsigned char rs485re_state)
 
 static void set_rs485de(unsigned char rs485de_state)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* This is on PORT A bit 11 */
 	if(rs485de_state)
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 2dccd87677..ea782a9137 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -69,8 +69,9 @@ int board_init ()
 #if defined(CONFIG_VFD)
 	extern int vfd_init_clocks(void);
 #endif
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* memory and cpu-speed are setup before relocation */
 #ifdef CONFIG_TRAB_50MHZ
@@ -338,22 +339,22 @@ static int key_pressed(void)
 
 static inline void SET_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT &= 0x5FF;
 }
 
 static inline void CLR_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT |= 0x200;
 }
 
 static void spi_init(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	int i;
 
 	/* Configure I/O ports. */
@@ -377,7 +378,7 @@ static void spi_init(void)
 
 static void wait_transmit_done(void)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
 }
@@ -385,7 +386,7 @@ static void wait_transmit_done(void)
 static void tsc2000_write(unsigned int page, unsigned int reg,
 						  unsigned int data)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	unsigned int command;
 
 	SET_CS_TOUCH();
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 74cdbfcbf4..dc2a8d7750 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -406,9 +406,9 @@ static int adc_read (unsigned int channel)
 {
 	int j = 1000; /* timeout value for wait loop in us */
 	int result;
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 	channel &= 0x7;
 
 	padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
@@ -446,9 +446,9 @@ static int adc_read (unsigned int channel)
 
 static void adc_init (void)
 {
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 
 	padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
 	padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -490,7 +490,7 @@ int do_power_switch (void)
 {
 	int result;
 
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure GPE7 as input */
 	gpio->PECON &= ~(0x3 << (2 * 7));
@@ -557,7 +557,7 @@ int do_vfd_id (void)
 	int i;
 	long int pcup_old, pccon_old;
 	int vfd_board_id;
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* try to red vfd board id from the value defined by pull-ups */
 
@@ -589,8 +589,8 @@ int do_buzzer (char **argv)
 {
 	int counter;
 
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* set prescaler for timer 2, 3 and 4 */
 	timers->TCFG0 &= ~0xFF00;
@@ -637,7 +637,7 @@ int do_buzzer (char **argv)
 
 int do_led (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure PC14 and PC15 as output */
 	gpio->PCCON &= ~(0xF << 28);
@@ -692,7 +692,7 @@ int do_led (char **argv)
 
 int do_full_bridge (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure PD5 and PD6 as output */
 	gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
@@ -801,7 +801,7 @@ int do_motor_contact (void)
 
 int do_motor (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* Configure I/O port */
 	gpio->PGCON &= ~(0x3 << 0);
@@ -827,8 +827,8 @@ static void print_identifier (void)
 int do_pwm (char **argv)
 {
 	int counter;
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
 
 	if (strcmp (argv[2], "on") == 0) {
 		/* configure pin GPD8 as TOUT3 */
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index 986b6fb079..fc501a8a4b 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -27,6 +27,7 @@
 
 #include <common.h>
 #include <s3c2400.h>
+#include <asm/io.h>
 #include <div64.h>
 #include "tsc2000.h"
 
@@ -44,8 +45,8 @@
 
 void tsc2000_spi_init(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	int i;
 
 	/* Configure I/O ports. */
@@ -71,7 +72,7 @@ void tsc2000_spi_init(void)
 
 void spi_wait_transmit_done(void)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
 }
@@ -79,7 +80,7 @@ void spi_wait_transmit_done(void)
 
 void tsc2000_write(unsigned short reg, unsigned short data)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	unsigned int command;
 
 	SET_CS_TOUCH();
@@ -100,7 +101,7 @@ void tsc2000_write(unsigned short reg, unsigned short data)
 unsigned short tsc2000_read (unsigned short reg)
 {
 	unsigned short command, data;
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	SET_CS_TOUCH();
 	command = 0x8000 | reg;
@@ -123,7 +124,7 @@ unsigned short tsc2000_read (unsigned short reg)
 
 void tsc2000_set_mux (unsigned int channel)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
 	CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
@@ -200,7 +201,7 @@ void tsc2000_set_mux (unsigned int channel)
 
 void tsc2000_set_range (unsigned int range)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	switch (range) {
 	case 1:
@@ -306,7 +307,7 @@ s32 tsc2000_contact_temp (void)
 
 void tsc2000_reg_init (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
 	tsc2000_write(TSC2000_REG_REF, 0x0011);
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index 50c09c295a..0b6253f656 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -128,7 +128,7 @@ void adc_wait_conversion_done(void);
 
 static inline void SET_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT &= 0x5FF;
 }
@@ -136,7 +136,7 @@ static inline void SET_CS_TOUCH(void)
 
 static inline void CLR_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT |= 0x200;
 }
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index e5ca4abe47..d5ad5bbdf5 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -358,9 +358,9 @@ int vfd_init_clocks (void)
 {
 	int i;
 
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+	struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
 
 	/* try to determine display type from the value
 	 * defined by pull-ups
@@ -429,8 +429,8 @@ int vfd_init_clocks (void)
  */
 int drv_vfd_init(void)
 {
-	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 	char *tmp;
 	ulong palette;
 	static int vfd_init_done = 0;
@@ -529,7 +529,7 @@ int drv_vfd_init(void)
  */
 void disable_vfd (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	VFD_DISABLE;
 	gpio->PDCON &= ~0xC;
diff --git a/common/serial.c b/common/serial.c
index b4db46b165..5f9ffd7e45 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -69,6 +69,18 @@ struct serial_device *__default_serial_console (void)
 #else
 #error "CONFIG_SERIAL? missing."
 #endif
+#elif defined(CONFIG_S5PC1XX)
+#if defined(CONFIG_SERIAL0)
+	return &s5pc1xx_serial0_device;
+#elif defined(CONFIG_SERIAL1)
+	return &s5pc1xx_serial1_device;
+#elif defined(CONFIG_SERIAL2)
+	return &s5pc1xx_serial2_device;
+#elif defined(CONFIG_SERIAL3)
+	return &s5pc1xx_serial3_device;
+#else
+#error "CONFIG_SERIAL? missing."
+#endif
 #elif defined(CONFIG_OMAP3_ZOOM2)
 		return ZOOM2_DEFAULT_SERIAL_DEVICE;
 #else
@@ -141,6 +153,12 @@ void serial_initialize (void)
 	serial_register(&s3c24xx_serial1_device);
 	serial_register(&s3c24xx_serial2_device);
 #endif
+#if defined(CONFIG_S5PC1XX)
+	serial_register(&s5pc1xx_serial0_device);
+	serial_register(&s5pc1xx_serial1_device);
+	serial_register(&s5pc1xx_serial2_device);
+	serial_register(&s5pc1xx_serial3_device);
+#endif
 	serial_assign (default_serial_console ()->name);
 }
 
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 11ec95e126..9148946136 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -40,7 +40,7 @@
 
 void do_irq (struct pt_regs *pt_regs)
 {
-	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-	u_int32_t intpnd = irq->INTPND;
+	struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
+	u_int32_t intpnd = readl(&irq->INTPND);
 
 }
diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c
index e0dca62563..136c7794a6 100644
--- a/cpu/arm920t/s3c24x0/speed.c
+++ b/cpu/arm920t/s3c24x0/speed.c
@@ -32,6 +32,8 @@
 #include <common.h>
 #if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
 
+#include <asm/io.h>
+
 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
@@ -53,49 +55,51 @@
 
 static ulong get_PLLCLK(int pllreg)
 {
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-    ulong r, m, p, s;
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	ulong r, m, p, s;
 
-    if (pllreg == MPLL)
-	r = clk_power->MPLLCON;
-    else if (pllreg == UPLL)
-	r = clk_power->UPLLCON;
-    else
-	hang();
+	if (pllreg == MPLL)
+		r = readl(&clk_power->MPLLCON);
+	else if (pllreg == UPLL)
+		r = readl(&clk_power->UPLLCON);
+	else
+		hang();
 
-    m = ((r & 0xFF000) >> 12) + 8;
-    p = ((r & 0x003F0) >> 4) + 2;
-    s = r & 0x3;
+	m = ((r & 0xFF000) >> 12) + 8;
+	p = ((r & 0x003F0) >> 4) + 2;
+	s = r & 0x3;
 
-    return((CONFIG_SYS_CLK_FREQ * m) / (p << s));
+	return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
 }
 
 /* return FCLK frequency */
 ulong get_FCLK(void)
 {
-    return(get_PLLCLK(MPLL));
+	return get_PLLCLK(MPLL);
 }
 
 /* return HCLK frequency */
 ulong get_HCLK(void)
 {
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
 
-    return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK());
+	return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK();
 }
 
 /* return PCLK frequency */
 ulong get_PCLK(void)
 {
-    S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
 
-    return((clk_power->CLKDIVN & 0x1) ? get_HCLK()/2 : get_HCLK());
+	return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK();
 }
 
 /* return UCLK frequency */
 ulong get_UCLK(void)
 {
-    return(get_PLLCLK(UPLL));
+	return get_PLLCLK(UPLL);
 }
 
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
+#endif /* defined(CONFIG_S3C2400) ||
+	  defined (CONFIG_S3C2410) ||
+	  defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c
index c8c7cdb520..20cedd4639 100644
--- a/cpu/arm920t/s3c24x0/timer.c
+++ b/cpu/arm920t/s3c24x0/timer.c
@@ -30,7 +30,11 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+#if defined(CONFIG_S3C2400) || \
+    defined(CONFIG_S3C2410) || \
+    defined(CONFIG_TRAB)
+
+#include <asm/io.h>
 
 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
@@ -39,40 +43,45 @@
 #endif
 
 int timer_load_val = 0;
+static ulong timer_clk;
 
 /* macro to read the 16 bit timer */
 static inline ulong READ_TIMER(void)
 {
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
 
-	return (timers->TCNTO4 & 0xffff);
+	return readl(&timers->TCNTO4) & 0xffff;
 }
 
 static ulong timestamp;
 static ulong lastdec;
 
-int timer_init (void)
+int timer_init(void)
 {
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
+	ulong tmr;
 
 	/* use PWM Timer 4 because it has no output */
 	/* prescaler for Timer 4 is 16 */
-	timers->TCFG0 = 0x0f00;
-	if (timer_load_val == 0)
-	{
+	writel(0x0f00, &timers->TCFG0);
+	if (timer_load_val == 0) {
 		/*
 		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
 		 * (default) and prescaler = 16. Should be 10390
 		 * @33.25MHz and 15625 @ 50 MHz
 		 */
-		timer_load_val = get_PCLK()/(2 * 16 * 100);
+		timer_load_val = get_PCLK() / (2 * 16 * 100);
+		timer_clk = get_PCLK() / (2 * 16);
 	}
 	/* load value for 10 ms timeout */
-	lastdec = timers->TCNTB4 = timer_load_val;
+	lastdec = timer_load_val;
+	writel(timer_load_val, &timers->TCNTB4);
 	/* auto load, manual update of Timer 4 */
-	timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
+	tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000;
+	writel(tmr, &timers->TCON);
 	/* auto load, start Timer 4 */
-	timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
+	tmr = (tmr & ~0x0700000) | 0x0500000;
+	writel(tmr, &timers->TCON);
 	timestamp = 0;
 
 	return (0);
@@ -82,58 +91,49 @@ int timer_init (void)
  * timer without interrupts
  */
 
-void reset_timer (void)
+void reset_timer(void)
 {
-	reset_timer_masked ();
+	reset_timer_masked();
 }
 
-ulong get_timer (ulong base)
+ulong get_timer(ulong base)
 {
-	return get_timer_masked () - base;
+	return get_timer_masked() - base;
 }
 
-void set_timer (ulong t)
+void set_timer(ulong t)
 {
 	timestamp = t;
 }
 
-void udelay (unsigned long usec)
+void udelay(unsigned long usec)
 {
 	ulong tmo;
-	ulong start = get_timer(0);
+	ulong start = get_ticks();
 
 	tmo = usec / 1000;
 	tmo *= (timer_load_val * 100);
 	tmo /= 1000;
 
-	while ((ulong)(get_timer_masked () - start) < tmo)
+	while ((ulong) (get_ticks() - start) < tmo)
 		/*NOP*/;
 }
 
-void reset_timer_masked (void)
+void reset_timer_masked(void)
 {
 	/* reset time */
 	lastdec = READ_TIMER();
 	timestamp = 0;
 }
 
-ulong get_timer_masked (void)
+ulong get_timer_masked(void)
 {
-	ulong now = READ_TIMER();
+	ulong tmr = get_ticks();
 
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
+	return tmr / (timer_clk / CONFIG_SYS_HZ);
 }
 
-void udelay_masked (unsigned long usec)
+void udelay_masked(unsigned long usec)
 {
 	ulong tmo;
 	ulong endtime;
@@ -145,13 +145,13 @@ void udelay_masked (unsigned long usec)
 		tmo /= 1000;
 	} else {
 		tmo = usec * (timer_load_val * 100);
-		tmo /= (1000*1000);
+		tmo /= (1000 * 1000);
 	}
 
-	endtime = get_timer_masked () + tmo;
+	endtime = get_ticks() + tmo;
 
 	do {
-		ulong now = get_timer_masked ();
+		ulong now = get_ticks();
 		diff = endtime - now;
 	} while (diff >= 0);
 }
@@ -162,14 +162,25 @@ void udelay_masked (unsigned long usec)
  */
 unsigned long long get_ticks(void)
 {
-	return get_timer(0);
+	ulong now = READ_TIMER();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec + timer_load_val - now;
+	}
+	lastdec = now;
+
+	return timestamp;
 }
 
 /*
  * This function is derived from PowerPC code (timebase clock frequency).
  * On ARM it returns the number of timer ticks per second.
  */
-ulong get_tbclk (void)
+ulong get_tbclk(void)
 {
 	ulong tbclk;
 
@@ -189,30 +200,31 @@ ulong get_tbclk (void)
 /*
  * reset the cpu by setting up the watchdog timer and let him time out
  */
-void reset_cpu (ulong ignored)
+void reset_cpu(ulong ignored)
 {
-	volatile S3C24X0_WATCHDOG * watchdog;
+	struct s3c24x0_watchdog *watchdog;
 
 #ifdef CONFIG_TRAB
-	extern void disable_vfd (void);
-
 	disable_vfd();
 #endif
 
-	watchdog = S3C24X0_GetBase_WATCHDOG();
+	watchdog = s3c24x0_get_base_watchdog();
 
 	/* Disable watchdog */
-	watchdog->WTCON = 0x0000;
+	writel(0x0000, &watchdog->WTCON);
 
 	/* Initialize watchdog timer count register */
-	watchdog->WTCNT = 0x0001;
+	writel(0x0001, &watchdog->WTCNT);
 
 	/* Enable watchdog timer; assert reset at timer timeout */
-	watchdog->WTCON = 0x0021;
+	writel(0x0021, &watchdog->WTCON);
 
-	while(1);	/* loop forever and wait for reset to happen */
+	while (1)
+		/* loop forever and wait for reset to happen */;
 
 	/*NOTREACHED*/
 }
 
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
+#endif /* defined(CONFIG_S3C2400)  ||
+	  defined (CONFIG_S3C2410) ||
+	  defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
index 9ccf575964..b5ba8c4f3a 100644
--- a/cpu/arm920t/s3c24x0/usb.c
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -32,41 +32,43 @@
 # include <s3c2410.h>
 #endif
 
-int usb_cpu_init (void)
-{
+#include <asm/io.h>
 
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+int usb_cpu_init(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 	/*
 	 * Set the 48 MHz UPLL clocking. Values are taken from
 	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
 	 */
-	clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
-	gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+	writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
+	/* 1 = use pads related USB for USB host */
+	writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
 
 	/*
 	 * Enable USB host clock.
 	 */
-	clk_power->CLKCON |= (1 << 4);
+	writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
 
 	return 0;
 }
 
-int usb_cpu_stop (void)
+int usb_cpu_stop(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
 	/* may not want to do this */
-	clk_power->CLKCON &= ~(1 << 4);
+	writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
 	return 0;
 }
 
-int usb_cpu_init_fail (void)
+int usb_cpu_init_fail(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	clk_power->CLKCON &= ~(1 << 4);
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
 	return 0;
 }
 
-# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
+# endif	/* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
 #endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index 7838014bd4..7672e4ce11 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -44,6 +44,7 @@
 #include <s3c2410.h>
 #endif
 
+#include <asm/io.h>
 #include <malloc.h>
 #include <usb.h>
 #include "usb_ohci.h"
@@ -56,10 +57,8 @@
 #define	OHCI_CONTROL_INIT \
 	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
 
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+#define min_t(type, x, y) \
+	({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
 
 #undef DEBUG
 #ifdef DEBUG
@@ -78,8 +77,8 @@
 #define m16_swap(x) swap_16(x)
 #define m32_swap(x) swap_32(x)
 
-/* global ohci_t */
-static ohci_t gohci;
+/* global struct ohci */
+static struct ohci gohci;
 /* this must be aligned to a 256 byte boundary */
 struct ohci_hcca ghcca[1];
 /* a pointer to the aligned storage */
@@ -87,7 +86,7 @@ struct ohci_hcca *phcca;
 /* this allocates EDs for all possible endpoints */
 struct ohci_device ohci_dev;
 /* urb_priv */
-urb_priv_t urb_priv;
+struct urb_priv urb_priv;
 /* RHSC flag */
 int got_rhsc;
 /* device which was disconnected */
@@ -109,21 +108,29 @@ int urb_finished = 0;
 			temp = readl (&hc->regs->roothub.register); \
 	temp; })
 
-static u32 roothub_a (struct ohci *hc)
-	{ return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
-	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
+static u32 roothub_a(struct ohci *hc)
+{
+	return read_roothub(hc, a, 0xfc0fe000);
+}
+static inline u32 roothub_b(struct ohci *hc)
+{
+	return readl(&hc->regs->roothub.b);
+}
+static inline u32 roothub_status(struct ohci *hc)
+{
+	return readl(&hc->regs->roothub.status);
+}
+static u32 roothub_portstatus(struct ohci *hc, int i)
+{
+	return read_roothub(hc, portstatus[i], 0xffe0fce0);
+}
 
 /* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+static int hc_interrupt(void);
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, struct urb_priv *urb,
+			  int interval);
 
 /*-------------------------------------------------------------------------*
  * URB support functions
@@ -131,11 +138,11 @@ td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
 
 /* free HCD-private data associated with this URB */
 
-static void urb_free_priv (urb_priv_t * urb)
+static void urb_free_priv(struct urb_priv *urb)
 {
-	int		i;
-	int		last;
-	struct td	* td;
+	int i;
+	int last;
+	struct td *td;
 
 	last = urb->length - 1;
 	if (last >= 0) {
@@ -152,227 +159,219 @@ static void urb_free_priv (urb_priv_t * urb)
 /*-------------------------------------------------------------------------*/
 
 #ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
+static int sohci_get_current_frame_number(struct usb_device *dev);
 
 /* debug| print the main components of an URB
  * small: 0) header + data packets 1) just header */
 
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, char * str, int small)
+static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer,
+		      int transfer_len, struct devrequest *setup, char *str,
+		      int small)
 {
-	urb_priv_t * purb = &urb_priv;
+	struct urb_priv *purb = &urb_priv;
 
 	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
-			str,
-			sohci_get_current_frame_number (dev),
-			usb_pipedevice (pipe),
-			usb_pipeendpoint (pipe),
-			usb_pipeout (pipe)? 'O': 'I',
-			usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
-				(usb_pipecontrol (pipe)? "CTRL": "BULK"),
-			purb->actual_length,
-			transfer_len, dev->status);
+	    str,
+	    sohci_get_current_frame_number(dev),
+	    usb_pipedevice(pipe),
+	    usb_pipeendpoint(pipe),
+	    usb_pipeout(pipe) ? 'O' : 'I',
+	    usb_pipetype(pipe) < 2 ?
+		(usb_pipeint(pipe) ? "INTR" : "ISOC") :
+		(usb_pipecontrol(pipe) ? "CTRL" : "BULK"),
+	    purb->actual_length, transfer_len, dev->status);
 #ifdef	OHCI_VERBOSE_DEBUG
 	if (!small) {
 		int i, len;
 
-		if (usb_pipecontrol (pipe)) {
-			printf (__FILE__ ": cmd(8):");
-			for (i = 0; i < 8 ; i++)
-				printf (" %02x", ((__u8 *) setup) [i]);
-			printf ("\n");
+		if (usb_pipecontrol(pipe)) {
+			printf(__FILE__ ": cmd(8):");
+			for (i = 0; i < 8; i++)
+				printf(" %02x", ((__u8 *) setup)[i]);
+			printf("\n");
 		}
 		if (transfer_len > 0 && buffer) {
-			printf (__FILE__ ": data(%d/%d):",
-				purb->actual_length,
-				transfer_len);
-			len = usb_pipeout (pipe)?
-					transfer_len: purb->actual_length;
+			printf(__FILE__ ": data(%d/%d):",
+			       purb->actual_length, transfer_len);
+			len = usb_pipeout(pipe) ?
+			    transfer_len : purb->actual_length;
 			for (i = 0; i < 16 && i < len; i++)
-				printf (" %02x", ((__u8 *) buffer) [i]);
-			printf ("%s\n", i < len? "...": "");
+				printf(" %02x", ((__u8 *) buffer)[i]);
+			printf("%s\n", i < len ? "..." : "");
 		}
 	}
 #endif
 }
 
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
+/* just for debugging; prints non-empty branches of the
+   int ed tree inclusive iso eds*/
+void ep_print_int_eds(struct ohci *ohci, char *str)
+{
 	int i, j;
-	 __u32 * ed_p;
-	for (i= 0; i < 32; i++) {
+	__u32 *ed_p;
+	for (i = 0; i < 32; i++) {
 		j = 5;
-		ed_p = &(ohci->hcca->int_table [i]);
+		ed_p = &(ohci->hcca->int_table[i]);
 		if (*ed_p == 0)
-		    continue;
-		printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+			continue;
+		printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
 		while (*ed_p != 0 && j--) {
-			ed_t *ed = (ed_t *)m32_swap(ed_p);
-			printf (" ed: %4x;", ed->hwINFO);
+			struct ed *ed = (struct ed *) m32_swap(ed_p);
+			printf(" ed: %4x;", ed->hwINFO);
 			ed_p = &ed->hwNextED;
 		}
-		printf ("\n");
+		printf("\n");
 	}
 }
 
-static void ohci_dump_intr_mask (char *label, __u32 mask)
+static void ohci_dump_intr_mask(char *label, __u32 mask)
 {
-	dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
-		label,
-		mask,
-		(mask & OHCI_INTR_MIE) ? " MIE" : "",
-		(mask & OHCI_INTR_OC) ? " OC" : "",
-		(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
-		(mask & OHCI_INTR_FNO) ? " FNO" : "",
-		(mask & OHCI_INTR_UE) ? " UE" : "",
-		(mask & OHCI_INTR_RD) ? " RD" : "",
-		(mask & OHCI_INTR_SF) ? " SF" : "",
-		(mask & OHCI_INTR_WDH) ? " WDH" : "",
-		(mask & OHCI_INTR_SO) ? " SO" : ""
-		);
+	dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+	    label,
+	    mask,
+	    (mask & OHCI_INTR_MIE) ? " MIE" : "",
+	    (mask & OHCI_INTR_OC) ? " OC" : "",
+	    (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+	    (mask & OHCI_INTR_FNO) ? " FNO" : "",
+	    (mask & OHCI_INTR_UE) ? " UE" : "",
+	    (mask & OHCI_INTR_RD) ? " RD" : "",
+	    (mask & OHCI_INTR_SF) ? " SF" : "",
+	    (mask & OHCI_INTR_WDH) ? " WDH" : "",
+	    (mask & OHCI_INTR_SO) ? " SO" : "");
 }
 
-static void maybe_print_eds (char *label, __u32 value)
+static void maybe_print_eds(char *label, __u32 value)
 {
-	ed_t *edp = (ed_t *)value;
+	struct ed *edp = (struct ed *) value;
 
 	if (value) {
-		dbg ("%s %08x", label, value);
-		dbg ("%08x", edp->hwINFO);
-		dbg ("%08x", edp->hwTailP);
-		dbg ("%08x", edp->hwHeadP);
-		dbg ("%08x", edp->hwNextED);
+		dbg("%s %08x", label, value);
+		dbg("%08x", edp->hwINFO);
+		dbg("%08x", edp->hwTailP);
+		dbg("%08x", edp->hwHeadP);
+		dbg("%08x", edp->hwNextED);
 	}
 }
 
-static char * hcfs2string (int state)
+static char *hcfs2string(int state)
 {
 	switch (state) {
-		case OHCI_USB_RESET:	return "reset";
-		case OHCI_USB_RESUME:	return "resume";
-		case OHCI_USB_OPER:	return "operational";
-		case OHCI_USB_SUSPEND:	return "suspend";
+	case OHCI_USB_RESET:
+		return "reset";
+	case OHCI_USB_RESUME:
+		return "resume";
+	case OHCI_USB_OPER:
+		return "operational";
+	case OHCI_USB_SUSPEND:
+		return "suspend";
 	}
 	return "?";
 }
 
 /* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
+static void ohci_dump_status(struct ohci *controller)
 {
-	struct ohci_regs	*regs = controller->regs;
-	__u32			temp;
+	struct ohci_regs *regs = controller->regs;
+	__u32 temp;
 
-	temp = readl (&regs->revision) & 0xff;
+	temp = readl(&regs->revision) & 0xff;
 	if (temp != 0x10)
-		dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
-	temp = readl (&regs->control);
-	dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
-		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
-		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
-		(temp & OHCI_CTRL_IR) ? " IR" : "",
-		hcfs2string (temp & OHCI_CTRL_HCFS),
-		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
-		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
-		(temp & OHCI_CTRL_IE) ? " IE" : "",
-		(temp & OHCI_CTRL_PLE) ? " PLE" : "",
-		temp & OHCI_CTRL_CBSR
-		);
-
-	temp = readl (&regs->cmdstatus);
-	dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
-		(temp & OHCI_SOC) >> 16,
-		(temp & OHCI_OCR) ? " OCR" : "",
-		(temp & OHCI_BLF) ? " BLF" : "",
-		(temp & OHCI_CLF) ? " CLF" : "",
-		(temp & OHCI_HCR) ? " HCR" : ""
-		);
-
-	ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
-	ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
-
-	maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
-
-	maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
-	maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
-
-	maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
-	maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
-
-	maybe_print_eds ("donehead", readl (&regs->donehead));
+		dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+	temp = readl(&regs->control);
+	dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+	    (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+	    (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+	    (temp & OHCI_CTRL_IR) ? " IR" : "",
+	    hcfs2string(temp & OHCI_CTRL_HCFS),
+	    (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+	    (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+	    (temp & OHCI_CTRL_IE) ? " IE" : "",
+	    (temp & OHCI_CTRL_PLE) ? " PLE" : "", temp & OHCI_CTRL_CBSR);
+
+	temp = readl(&regs->cmdstatus);
+	dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+	    (temp & OHCI_SOC) >> 16,
+	    (temp & OHCI_OCR) ? " OCR" : "",
+	    (temp & OHCI_BLF) ? " BLF" : "",
+	    (temp & OHCI_CLF) ? " CLF" : "", (temp & OHCI_HCR) ? " HCR" : "");
+
+	ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
+	ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));
+
+	maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));
+
+	maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
+	maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));
+
+	maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
+	maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));
+
+	maybe_print_eds("donehead", readl(&regs->donehead));
 }
 
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
+static void ohci_dump_roothub(struct ohci *controller, int verbose)
 {
-	__u32			temp, ndp, i;
+	__u32 temp, ndp, i;
 
-	temp = roothub_a (controller);
+	temp = roothub_a(controller);
 	ndp = (temp & RH_A_NDP);
 
 	if (verbose) {
-		dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
-			((temp & RH_A_POTPGT) >> 24) & 0xff,
-			(temp & RH_A_NOCP) ? " NOCP" : "",
-			(temp & RH_A_OCPM) ? " OCPM" : "",
-			(temp & RH_A_DT) ? " DT" : "",
-			(temp & RH_A_NPS) ? " NPS" : "",
-			(temp & RH_A_PSM) ? " PSM" : "",
-			ndp
-			);
-		temp = roothub_b (controller);
-		dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
-			temp,
-			(temp & RH_B_PPCM) >> 16,
-			(temp & RH_B_DR)
-			);
-		temp = roothub_status (controller);
-		dbg ("roothub.status: %08x%s%s%s%s%s%s",
-			temp,
-			(temp & RH_HS_CRWE) ? " CRWE" : "",
-			(temp & RH_HS_OCIC) ? " OCIC" : "",
-			(temp & RH_HS_LPSC) ? " LPSC" : "",
-			(temp & RH_HS_DRWE) ? " DRWE" : "",
-			(temp & RH_HS_OCI) ? " OCI" : "",
-			(temp & RH_HS_LPS) ? " LPS" : ""
-			);
+		dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+		    ((temp & RH_A_POTPGT) >> 24) & 0xff,
+		    (temp & RH_A_NOCP) ? " NOCP" : "",
+		    (temp & RH_A_OCPM) ? " OCPM" : "",
+		    (temp & RH_A_DT) ? " DT" : "",
+		    (temp & RH_A_NPS) ? " NPS" : "",
+		    (temp & RH_A_PSM) ? " PSM" : "", ndp);
+		temp = roothub_b(controller);
+		dbg("roothub.b: %08x PPCM=%04x DR=%04x",
+		    temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR)
+		    );
+		temp = roothub_status(controller);
+		dbg("roothub.status: %08x%s%s%s%s%s%s",
+		    temp,
+		    (temp & RH_HS_CRWE) ? " CRWE" : "",
+		    (temp & RH_HS_OCIC) ? " OCIC" : "",
+		    (temp & RH_HS_LPSC) ? " LPSC" : "",
+		    (temp & RH_HS_DRWE) ? " DRWE" : "",
+		    (temp & RH_HS_OCI) ? " OCI" : "",
+		    (temp & RH_HS_LPS) ? " LPS" : "");
 	}
 
 	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
-		dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
-			i,
-			temp,
-			(temp & RH_PS_PRSC) ? " PRSC" : "",
-			(temp & RH_PS_OCIC) ? " OCIC" : "",
-			(temp & RH_PS_PSSC) ? " PSSC" : "",
-			(temp & RH_PS_PESC) ? " PESC" : "",
-			(temp & RH_PS_CSC) ? " CSC" : "",
-
-			(temp & RH_PS_LSDA) ? " LSDA" : "",
-			(temp & RH_PS_PPS) ? " PPS" : "",
-			(temp & RH_PS_PRS) ? " PRS" : "",
-			(temp & RH_PS_POCI) ? " POCI" : "",
-			(temp & RH_PS_PSS) ? " PSS" : "",
-
-			(temp & RH_PS_PES) ? " PES" : "",
-			(temp & RH_PS_CCS) ? " CCS" : ""
-			);
+		temp = roothub_portstatus(controller, i);
+		dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+		    i,
+		    temp,
+		    (temp & RH_PS_PRSC) ? " PRSC" : "",
+		    (temp & RH_PS_OCIC) ? " OCIC" : "",
+		    (temp & RH_PS_PSSC) ? " PSSC" : "",
+		    (temp & RH_PS_PESC) ? " PESC" : "",
+		    (temp & RH_PS_CSC) ? " CSC" : "",
+		    (temp & RH_PS_LSDA) ? " LSDA" : "",
+		    (temp & RH_PS_PPS) ? " PPS" : "",
+		    (temp & RH_PS_PRS) ? " PRS" : "",
+		    (temp & RH_PS_POCI) ? " POCI" : "",
+		    (temp & RH_PS_PSS) ? " PSS" : "",
+		    (temp & RH_PS_PES) ? " PES" : "",
+		    (temp & RH_PS_CCS) ? " CCS" : "");
 	}
 }
 
-static void ohci_dump (ohci_t *controller, int verbose)
+static void ohci_dump(struct ohci *controller, int verbose)
 {
-	dbg ("OHCI controller usb-%s state", controller->slot_name);
+	dbg("OHCI controller usb-%s state", controller->slot_name);
 
 	/* dumps some of the state we know about */
-	ohci_dump_status (controller);
+	ohci_dump_status(controller);
 	if (verbose)
-		ep_print_int_eds (controller, "hcca");
-	dbg ("hcca frame #%04x", controller->hcca->frame_no);
-	ohci_dump_roothub (controller, 1);
+		ep_print_int_eds(controller, "hcca");
+	dbg("hcca frame #%04x", controller->hcca->frame_no);
+	ohci_dump_roothub(controller, 1);
 }
 
-
 #endif /* DEBUG */
 
 /*-------------------------------------------------------------------------*
@@ -382,11 +381,11 @@ static void ohci_dump (ohci_t *controller, int verbose)
 /* get a transfer request */
 
 int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup, int interval)
+		     int transfer_len, struct devrequest *setup, int interval)
 {
-	ohci_t *ohci;
-	ed_t * ed;
-	urb_priv_t *purb_priv;
+	struct ohci *ohci;
+	struct ed *ed;
+	struct urb_priv *purb_priv;
 	int i, size = 0;
 
 	ohci = &gohci;
@@ -405,24 +404,27 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
 		err("sohci_submit_job: URB NOT FINISHED");
 		return -1;
 	}
-	/* we're about to begin a new transaction here so mark the URB unfinished */
+	/* we're about to begin a new transaction here
+	   so mark the URB unfinished */
 	urb_finished = 0;
 
 	/* every endpoint has a ed, locate and fill it */
-	if (!(ed = ep_add_ed (dev, pipe))) {
+	ed = ep_add_ed(dev, pipe);
+	if (!ed) {
 		err("sohci_submit_job: ENOMEM");
 		return -1;
 	}
 
 	/* for the private part of the URB we need the number of TDs (size) */
-	switch (usb_pipetype (pipe)) {
-		case PIPE_BULK:	/* one TD for every 4096 Byte */
-			size = (transfer_len - 1) / 4096 + 1;
-			break;
-		case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
-			size = (transfer_len == 0)? 2:
-						(transfer_len - 1) / 4096 + 3;
-			break;
+	switch (usb_pipetype(pipe)) {
+	case PIPE_BULK:
+		/* one TD for every 4096 Byte */
+		size = (transfer_len - 1) / 4096 + 1;
+		break;
+	case PIPE_CONTROL:
+		/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+		size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3;
+		break;
 	}
 
 	if (size >= (N_URB_TD - 1)) {
@@ -440,27 +442,28 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
 	/* allocate the TDs */
 	/* note that td[0] was allocated in ep_add_ed */
 	for (i = 0; i < size; i++) {
-		purb_priv->td[i] = td_alloc (dev);
+		purb_priv->td[i] = td_alloc(dev);
 		if (!purb_priv->td[i]) {
 			purb_priv->length = i;
-			urb_free_priv (purb_priv);
+			urb_free_priv(purb_priv);
 			err("sohci_submit_job: ENOMEM");
 			return -1;
 		}
 	}
 
 	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
-		urb_free_priv (purb_priv);
+		urb_free_priv(purb_priv);
 		err("sohci_submit_job: EINVAL");
 		return -1;
 	}
 
 	/* link the ed into a chain if is not already */
 	if (ed->state != ED_OPER)
-		ep_link (ohci, ed);
+		ep_link(ohci, ed);
 
 	/* fill the TDs and link it to the ed */
-	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv,
+		      interval);
 
 	return 0;
 }
@@ -470,11 +473,11 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
 #ifdef DEBUG
 /* tell us the current USB frame number */
 
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+static int sohci_get_current_frame_number(struct usb_device *usb_dev)
 {
-	ohci_t *ohci = &gohci;
+	struct ohci *ohci = &gohci;
 
-	return m16_swap (ohci->hcca->frame_no);
+	return m16_swap(ohci->hcca->frame_no);
 }
 #endif
 
@@ -484,9 +487,9 @@ static int sohci_get_current_frame_number (struct usb_device *usb_dev)
 
 /* link an ed into one of the HC chains */
 
-static int ep_link (ohci_t *ohci, ed_t *edi)
+static int ep_link(struct ohci *ohci, struct ed *edi)
 {
-	volatile ed_t *ed = edi;
+	struct ed *ed = edi;
 
 	ed->state = ED_OPER;
 
@@ -494,15 +497,15 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 	case PIPE_CONTROL:
 		ed->hwNextED = 0;
 		if (ohci->ed_controltail == NULL) {
-			writel (ed, &ohci->regs->ed_controlhead);
+			writel((u32)ed, &ohci->regs->ed_controlhead);
 		} else {
-			ohci->ed_controltail->hwNextED = (__u32)m32_swap (ed);
+			ohci->ed_controltail->hwNextED = (__u32) m32_swap(ed);
 		}
 		ed->ed_prev = ohci->ed_controltail;
 		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
-			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
 			ohci->hc_control |= OHCI_CTRL_CLE;
-			writel (ohci->hc_control, &ohci->regs->control);
+			writel(ohci->hc_control, &ohci->regs->control);
 		}
 		ohci->ed_controltail = edi;
 		break;
@@ -510,15 +513,15 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 	case PIPE_BULK:
 		ed->hwNextED = 0;
 		if (ohci->ed_bulktail == NULL) {
-			writel (ed, &ohci->regs->ed_bulkhead);
+			writel((u32)ed, &ohci->regs->ed_bulkhead);
 		} else {
-			ohci->ed_bulktail->hwNextED = (__u32)m32_swap (ed);
+			ohci->ed_bulktail->hwNextED = (__u32) m32_swap(ed);
 		}
 		ed->ed_prev = ohci->ed_bulktail;
 		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
-			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
 			ohci->hc_control |= OHCI_CTRL_BLE;
-			writel (ohci->hc_control, &ohci->regs->control);
+			writel(ohci->hc_control, &ohci->regs->control);
 		}
 		ohci->ed_bulktail = edi;
 		break;
@@ -533,25 +536,28 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
  * the link from the ed still points to another operational ed or 0
  * so the HC can eventually finish the processing of the unlinked ed */
 
-static int ep_unlink (ohci_t *ohci, ed_t *ed)
+static int ep_unlink(struct ohci *ohci, struct ed *ed)
 {
-	ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
+	struct ed *next;
+	ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
 
 	switch (ed->type) {
 	case PIPE_CONTROL:
 		if (ed->ed_prev == NULL) {
 			if (!ed->hwNextED) {
 				ohci->hc_control &= ~OHCI_CTRL_CLE;
-				writel (ohci->hc_control, &ohci->regs->control);
+				writel(ohci->hc_control, &ohci->regs->control);
 			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
+			       &ohci->regs->ed_controlhead);
 		} else {
 			ed->ed_prev->hwNextED = ed->hwNextED;
 		}
 		if (ohci->ed_controltail == ed) {
 			ohci->ed_controltail = ed->ed_prev;
 		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
+			next->ed_prev = ed->ed_prev;
 		}
 		break;
 
@@ -559,16 +565,18 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed)
 		if (ed->ed_prev == NULL) {
 			if (!ed->hwNextED) {
 				ohci->hc_control &= ~OHCI_CTRL_BLE;
-				writel (ohci->hc_control, &ohci->regs->control);
+				writel(ohci->hc_control, &ohci->regs->control);
 			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
+			       &ohci->regs->ed_bulkhead);
 		} else {
 			ed->ed_prev->hwNextED = ed->hwNextED;
 		}
 		if (ohci->ed_bulktail == ed) {
 			ohci->ed_bulktail = ed->ed_prev;
 		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
+			next->ed_prev = ed->ed_prev;
 		}
 		break;
 	}
@@ -576,23 +584,24 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed)
 	return 0;
 }
 
-
 /*-------------------------------------------------------------------------*/
 
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless  so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration
+ * command, but the USB stack is a little bit stateless  so we do it at every
+ * transaction. If the state of the ed is ED_NEW then a dummy td is added and
+ * the state is changed to ED_UNLINK. In all other cases the state is left
+ * unchanged. The ed info fields are setted anyway even though most of them
+ * should not change */
 
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
 {
-	td_t *td;
-	ed_t *ed_ret;
-	volatile ed_t *ed;
+	struct td *td;
+	struct ed *ed_ret;
+	struct ed *ed;
 
-	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
-			(usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
+				   (usb_pipecontrol(pipe) ? 0 :
+				    usb_pipeout(pipe))];
 
 	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
 		err("ep_add_ed: pending delete");
@@ -601,22 +610,23 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 	}
 
 	if (ed->state == ED_NEW) {
-		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
+		ed->hwINFO = m32_swap(OHCI_ED_SKIP);	/* skip ed */
 		/* dummy td; end of td list for ed */
-		td = td_alloc (usb_dev);
-		ed->hwTailP = (__u32)m32_swap (td);
+		td = td_alloc(usb_dev);
+		ed->hwTailP = (__u32) m32_swap(td);
 		ed->hwHeadP = ed->hwTailP;
 		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype (pipe);
+		ed->type = usb_pipetype(pipe);
 		ohci_dev.ed_cnt++;
 	}
 
-	ed->hwINFO = m32_swap (usb_pipedevice (pipe)
-			| usb_pipeendpoint (pipe) << 7
-			| (usb_pipeisoc (pipe)? 0x8000: 0)
-			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
-			| usb_maxpacket (usb_dev, pipe) << 16);
+	ed->hwINFO = m32_swap(usb_pipedevice(pipe)
+			      | usb_pipeendpoint(pipe) << 7
+			      | (usb_pipeisoc(pipe) ? 0x8000 : 0)
+			      | (usb_pipecontrol(pipe) ? 0 :
+				 (usb_pipeout(pipe) ? 0x800 : 0x1000))
+			      | usb_pipeslow(pipe) << 13 |
+			      usb_maxpacket(usb_dev, pipe) << 16);
 
 	return ed_ret;
 }
@@ -627,11 +637,11 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 
 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
 
-static void td_fill (ohci_t *ohci, unsigned int info,
-	void *data, int len,
-	struct usb_device *dev, int index, urb_priv_t *urb_priv)
+static void td_fill(struct ohci *ohci, unsigned int info, void *data, int len,
+		    struct usb_device *dev, int index,
+		    struct urb_priv *urb_priv)
 {
-	volatile td_t  *td, *td_pt;
+	struct td *td, *td_pt;
 #ifdef OHCI_FILL_TRACE
 	int i;
 #endif
@@ -641,33 +651,35 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 		return;
 	}
 	/* use this td as the next dummy */
-	td_pt = urb_priv->td [index];
+	td_pt = urb_priv->td[index];
 	td_pt->hwNextTD = 0;
 
 	/* fill the old dummy TD */
-	td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
+	td = urb_priv->td[index] =
+	    (struct td *) (m32_swap(urb_priv->ed->hwTailP) & ~0xf);
 
 	td->ed = urb_priv->ed;
 	td->next_dl_td = NULL;
 	td->index = index;
-	td->data = (__u32)data;
+	td->data = (__u32) data;
 #ifdef OHCI_FILL_TRACE
 	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 		for (i = 0; i < len; i++)
-		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+			printf("td->data[%d] %#2x ", i,
+			       ((unsigned char *)td->data)[i]);
 		printf("\n");
 	}
 #endif
 	if (!len)
 		data = 0;
 
-	td->hwINFO = (__u32)m32_swap (info);
-	td->hwCBP = (__u32)m32_swap (data);
+	td->hwINFO = (__u32) m32_swap(info);
+	td->hwCBP = (__u32) m32_swap(data);
 	if (data)
-		td->hwBE = (__u32)m32_swap (data + len - 1);
+		td->hwBE = (__u32) m32_swap(data + len - 1);
 	else
 		td->hwBE = 0;
-	td->hwNextTD = (__u32)m32_swap (td_pt);
+	td->hwNextTD = (__u32) m32_swap(td_pt);
 
 	/* append to queue */
 	td->ed->hwTailP = td->hwNextTD;
@@ -677,22 +689,26 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 
 /* prepare all TDs of a transfer */
 
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
-	int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, struct urb_priv *urb,
+			  int interval)
 {
-	ohci_t *ohci = &gohci;
+	struct ohci *ohci = &gohci;
 	int data_len = transfer_len;
 	void *data;
 	int cnt = 0;
 	__u32 info = 0;
 	unsigned int toggle = 0;
 
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
-	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+	/* OHCI handles the DATA-toggles itself, we just
+	   use the USB-toggle bits for reseting */
+	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {
 		toggle = TD_T_DATA0;
-		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe),
+			      1);
 	}
 	urb->td_cnt = 0;
 	if (data_len)
@@ -700,37 +716,45 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	else
 		data = 0;
 
-	switch (usb_pipetype (pipe)) {
+	switch (usb_pipetype(pipe)) {
 	case PIPE_BULK:
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
-		while(data_len > 4096) {
-			td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
-			data += 4096; data_len -= 4096; cnt++;
+		info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN;
+		while (data_len > 4096) {
+			td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
+				4096, dev, cnt, urb);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
 		}
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
-		td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+		info = usb_pipeout(pipe) ?
+				TD_CC | TD_DP_OUT :
+				TD_CC | TD_R | TD_DP_IN;
+		td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
+			data_len, dev, cnt, urb);
 		cnt++;
 
 		if (!ohci->sleeping)
-			writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+			/* start bulk list */
+			writel(OHCI_BLF, &ohci->regs->cmdstatus);
 		break;
 
 	case PIPE_CONTROL:
 		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
-		td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+		td_fill(ohci, info, setup, 8, dev, cnt++, urb);
 		if (data_len > 0) {
-			info = usb_pipeout (pipe)?
-				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+			info = usb_pipeout(pipe) ?
+			    TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
+			    TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
 			/* NOTE:  mishandles transfers >8K, some >4K */
-			td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+			td_fill(ohci, info, data, data_len, dev, cnt++, urb);
 		}
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
-		td_fill (ohci, info, data, 0, dev, cnt++, urb);
+		info = usb_pipeout(pipe) ?
+		    TD_CC | TD_DP_IN | TD_T_DATA1 :
+		    TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill(ohci, info, data, 0, dev, cnt++, urb);
 		if (!ohci->sleeping)
-			writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+			/* start Control list */
+			writel(OHCI_CLF, &ohci->regs->cmdstatus);
 		break;
 	}
 	if (urb->length != cnt)
@@ -744,18 +768,17 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 
 /* calculate the transfer length and update the urb */
 
-static void dl_transfer_length(td_t * td)
+static void dl_transfer_length(struct td *td)
 {
 	__u32 tdINFO, tdBE, tdCBP;
-	urb_priv_t *lurb_priv = &urb_priv;
-
-	tdINFO = m32_swap (td->hwINFO);
-	tdBE   = m32_swap (td->hwBE);
-	tdCBP  = m32_swap (td->hwCBP);
+	struct urb_priv *lurb_priv = &urb_priv;
 
+	tdINFO = m32_swap(td->hwINFO);
+	tdBE = m32_swap(td->hwBE);
+	tdCBP = m32_swap(td->hwCBP);
 
 	if (!(usb_pipecontrol(lurb_priv->pipe) &&
-	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+	      ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
 				lurb_priv->actual_length += tdBE - td->data + 1;
@@ -770,37 +793,44 @@ static void dl_transfer_length(td_t * td)
 /* replies to the request have to be on a FIFO basis so
  * we reverse the reversed done-list */
 
-static td_t * dl_reverse_done_list (ohci_t *ohci)
+static struct td *dl_reverse_done_list(struct ohci *ohci)
 {
 	__u32 td_list_hc;
-	td_t *td_rev = NULL;
-	td_t *td_list = NULL;
-	urb_priv_t *lurb_priv = NULL;
+	__u32 tmp;
+	struct td *td_rev = NULL;
+	struct td *td_list = NULL;
+	struct urb_priv *lurb_priv = NULL;
 
-	td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
+	td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
 	ohci->hcca->done_head = 0;
 
 	while (td_list_hc) {
-		td_list = (td_t *)td_list_hc;
+		td_list = (struct td *) td_list_hc;
 
-		if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
+		if (TD_CC_GET(m32_swap(td_list->hwINFO))) {
 			lurb_priv = &urb_priv;
 			dbg(" USB-error/status: %x : %p",
-					TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
-			if (td_list->ed->hwHeadP & m32_swap (0x1)) {
-				if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+			    TD_CC_GET(m32_swap(td_list->hwINFO)), td_list);
+			if (td_list->ed->hwHeadP & m32_swap(0x1)) {
+				if (lurb_priv &&
+				    ((td_list->index+1) < lurb_priv->length)) {
+					tmp = lurb_priv->length - 1;
 					td_list->ed->hwHeadP =
-						(lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
-									(td_list->ed->hwHeadP & m32_swap (0x2));
-					lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+						(lurb_priv->td[tmp]->hwNextTD &
+						 m32_swap(0xfffffff0)) |
+						 (td_list->ed->hwHeadP &
+						  m32_swap(0x2));
+					lurb_priv->td_cnt += lurb_priv->length -
+							     td_list->index - 1;
 				} else
-					td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
+					td_list->ed->hwHeadP &=
+					    m32_swap(0xfffffff2);
 			}
 		}
 
 		td_list->next_dl_td = td_rev;
 		td_rev = td_list;
-		td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
+		td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
 	}
 
 	return td_list;
@@ -809,28 +839,28 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
 /*-------------------------------------------------------------------------*/
 
 /* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
+static int dl_done_list(struct ohci *ohci, struct td *td_list)
 {
-	td_t *td_list_next = NULL;
-	ed_t *ed;
+	struct td *td_list_next = NULL;
+	struct ed *ed;
 	int cc = 0;
 	int stat = 0;
 	/* urb_t *urb; */
-	urb_priv_t *lurb_priv;
+	struct urb_priv *lurb_priv;
 	__u32 tdINFO, edHeadP, edTailP;
 
 	while (td_list) {
 		td_list_next = td_list->next_dl_td;
 
 		lurb_priv = &urb_priv;
-		tdINFO = m32_swap (td_list->hwINFO);
+		tdINFO = m32_swap(td_list->hwINFO);
 
 		ed = td_list->ed;
 
 		dl_transfer_length(td_list);
 
 		/* error code of transfer */
-		cc = TD_CC_GET (tdINFO);
+		cc = TD_CC_GET(tdINFO);
 		if (cc != 0) {
 			dbg("ConditionCode %#x", cc);
 			stat = cc_to_error[cc];
@@ -842,18 +872,19 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
 			if ((ed->state & (ED_OPER | ED_UNLINK)))
 				urb_finished = 1;
 			else
-				dbg("dl_done_list: strange.., ED state %x, ed->state\n");
+				dbg("dl_done_list: strange.., ED state %x, "
+				    "ed->state\n");
 		} else
-			dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
-				lurb_priv->length);
+			dbg("dl_done_list: processing TD %x, len %x\n",
+			    lurb_priv->td_cnt, lurb_priv->length);
 
 		if (ed->state != ED_NEW) {
-			edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
-			edTailP = m32_swap (ed->hwTailP);
+			edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
+			edTailP = m32_swap(ed->hwTailP);
 
 			/* unlink eds if they are not busy */
 			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
-				ep_unlink (ohci, ed);
+				ep_unlink(ohci, ed);
 		}
 
 		td_list = td_list_next;
@@ -866,102 +897,98 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
  *-------------------------------------------------------------------------*/
 
 /* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
-	0x12,       /*  __u8  bLength; */
-	0x01,       /*  __u8  bDescriptorType; Device */
-	0x10,	    /*  __u16 bcdUSB; v1.1 */
+static __u8 root_hub_dev_des[] = {
+	0x12,	/*  __u8  bLength; */
+	0x01,	/*  __u8  bDescriptorType; Device */
+	0x10,	/*  __u16 bcdUSB; v1.1 */
 	0x01,
-	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*  __u8  bDeviceSubClass; */
-	0x00,       /*  __u8  bDeviceProtocol; */
-	0x08,       /*  __u8  bMaxPacketSize0; 8 Bytes */
-	0x00,       /*  __u16 idVendor; */
+	0x09,	/*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	/*  __u8  bDeviceSubClass; */
+	0x00,	/*  __u8  bDeviceProtocol; */
+	0x08,	/*  __u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	/*  __u16 idVendor; */
 	0x00,
-	0x00,       /*  __u16 idProduct; */
+	0x00,	/*  __u16 idProduct; */
 	0x00,
-	0x00,       /*  __u16 bcdDevice; */
+	0x00,	/*  __u16 bcdDevice; */
 	0x00,
-	0x00,       /*  __u8  iManufacturer; */
-	0x01,       /*  __u8  iProduct; */
-	0x00,       /*  __u8  iSerialNumber; */
-	0x01        /*  __u8  bNumConfigurations; */
+	0x00,	/*  __u8  iManufacturer; */
+	0x01,	/*  __u8  iProduct; */
+	0x00,	/*  __u8  iSerialNumber; */
+	0x01	/*  __u8  bNumConfigurations; */
 };
 
-
 /* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
-	0x09,       /*  __u8  bLength; */
-	0x02,       /*  __u8  bDescriptorType; Configuration */
-	0x19,       /*  __u16 wTotalLength; */
+static __u8 root_hub_config_des[] = {
+	0x09,	/*  __u8  bLength; */
+	0x02,	/*  __u8  bDescriptorType; Configuration */
+	0x19,	/*  __u16 wTotalLength; */
 	0x00,
-	0x01,       /*  __u8  bNumInterfaces; */
-	0x01,       /*  __u8  bConfigurationValue; */
-	0x00,       /*  __u8  iConfiguration; */
-	0x40,       /*  __u8  bmAttributes;
-		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
-	0x00,       /*  __u8  MaxPower; */
+	0x01,	/*  __u8  bNumInterfaces; */
+	0x01,	/*  __u8  bConfigurationValue; */
+	0x00,	/*  __u8  iConfiguration; */
+	0x40,	/*  __u8  bmAttributes;
+		   Bit 7: Bus-powered, 6: Self-powered,
+		   5 Remote-wakwup, 4..0: resvd */
+	0x00,	/*  __u8  MaxPower; */
 
 	/* interface */
-	0x09,       /*  __u8  if_bLength; */
-	0x04,       /*  __u8  if_bDescriptorType; Interface */
-	0x00,       /*  __u8  if_bInterfaceNumber; */
-	0x00,       /*  __u8  if_bAlternateSetting; */
-	0x01,       /*  __u8  if_bNumEndpoints; */
-	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,       /*  __u8  if_bInterfaceSubClass; */
-	0x00,       /*  __u8  if_bInterfaceProtocol; */
-	0x00,       /*  __u8  if_iInterface; */
+	0x09,	/*  __u8  if_bLength; */
+	0x04,	/*  __u8  if_bDescriptorType; Interface */
+	0x00,	/*  __u8  if_bInterfaceNumber; */
+	0x00,	/*  __u8  if_bAlternateSetting; */
+	0x01,	/*  __u8  if_bNumEndpoints; */
+	0x09,	/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	/*  __u8  if_bInterfaceSubClass; */
+	0x00,	/*  __u8  if_bInterfaceProtocol; */
+	0x00,	/*  __u8  if_iInterface; */
 
 	/* endpoint */
-	0x07,       /*  __u8  ep_bLength; */
-	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
-	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
-	0x02,       /*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x07,	/*  __u8  ep_bLength; */
+	0x05,	/*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,	/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	/*  __u8  ep_bmAttributes; Interrupt */
+	0x02,	/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
 	0x00,
-	0xff        /*  __u8  ep_bInterval; 255 ms */
+	0xff	/*  __u8  ep_bInterval; 255 ms */
 };
 
-static unsigned char root_hub_str_index0[] =
-{
-	0x04,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	0x09,			/*  __u8  lang ID */
-	0x04,			/*  __u8  lang ID */
+static unsigned char root_hub_str_index0[] = {
+	0x04,	/*  __u8  bLength; */
+	0x03,	/*  __u8  bDescriptorType; String-descriptor */
+	0x09,	/*  __u8  lang ID */
+	0x04,	/*  __u8  lang ID */
 };
 
-static unsigned char root_hub_str_index1[] =
-{
-	28,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	'O',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'C',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'I',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'R',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	't',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'u',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'b',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
+static unsigned char root_hub_str_index1[] = {
+	28,	/*  __u8  bLength; */
+	0x03,	/*  __u8  bDescriptorType; String-descriptor */
+	'O',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'H',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'C',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'I',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	' ',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'R',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'o',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'o',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	't',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	' ',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'H',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'u',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
+	'b',	/*  __u8  Unicode */
+	0,	/*  __u8  Unicode */
 };
 
 /* Hub class-specific descriptor is constructed dynamically */
@@ -971,31 +998,40 @@ static unsigned char root_hub_str_index1[] =
 
 #define OK(x)			len = (x); break
 #ifdef DEBUG
-#define WR_RH_STAT(x)		{info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#define WR_RH_STAT(x) \
+{ \
+	info("WR:status %#8x", (x)); \
+	writel((x), &gohci.regs->roothub.status); \
+}
+#define WR_RH_PORTSTAT(x) \
+{ \
+	info("WR:portstatus[%d] %#8x", wIndex-1, (x)); \
+	writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); \
+}
 #else
-#define WR_RH_STAT(x)		writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x)	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#define WR_RH_STAT(x) \
+	writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x)\
+	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
 #endif
-#define RD_RH_STAT		roothub_status(&gohci)
-#define RD_RH_PORTSTAT		roothub_portstatus(&gohci,wIndex-1)
+#define RD_RH_STAT	roothub_status(&gohci)
+#define RD_RH_PORTSTAT	roothub_portstatus(&gohci, wIndex-1)
 
 /* request to virtual root hub */
 
-int rh_check_port_status(ohci_t *controller)
+int rh_check_port_status(struct ohci *controller)
 {
 	__u32 temp, ndp, i;
 	int res;
 
 	res = -1;
-	temp = roothub_a (controller);
+	temp = roothub_a(controller);
 	ndp = (temp & RH_A_NDP);
 	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
+		temp = roothub_portstatus(controller, i);
 		/* check for a device disconnect */
 		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
-			(RH_PS_PESC | RH_PS_CSC)) &&
-			((temp & RH_PS_CCS) == 0)) {
+		     (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
 			res = i;
 			break;
 		}
@@ -1004,22 +1040,24 @@ int rh_check_port_status(ohci_t *controller)
 }
 
 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-		void *buffer, int transfer_len, struct devrequest *cmd)
+			      void *buffer, int transfer_len,
+			      struct devrequest *cmd)
 {
-	void * data = buffer;
+	void *data = buffer;
 	int leni = transfer_len;
 	int len = 0;
 	int stat = 0;
 	__u32 datab[4];
-	__u8 *data_buf = (__u8 *)datab;
+	__u8 *data_buf = (__u8 *) datab;
 	__u16 bmRType_bReq;
 	__u16 wValue;
 	__u16 wIndex;
 	__u16 wLength;
 
 #ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)",
+		  usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
@@ -1028,189 +1066,216 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 		return 0;
 	}
 
-	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
-	wValue        = m16_swap (cmd->value);
-	wIndex        = m16_swap (cmd->index);
-	wLength       = m16_swap (cmd->length);
+	bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+	wValue = m16_swap(cmd->value);
+	wIndex = m16_swap(cmd->index);
+	wLength = m16_swap(cmd->length);
 
 	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
-		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+	     dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
 
 	switch (bmRType_bReq) {
-	/* Request Destination:
-	   without flags: Device,
-	   RH_INTERFACE: interface,
-	   RH_ENDPOINT: endpoint,
-	   RH_CLASS means HUB here,
-	   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
-	*/
+		/* Request Destination:
+		   without flags: Device,
+		   RH_INTERFACE: interface,
+		   RH_ENDPOINT: endpoint,
+		   RH_CLASS means HUB here,
+		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
+		 */
 
 	case RH_GET_STATUS:
-			*(__u16 *) data_buf = m16_swap (1); OK (2);
+		*(__u16 *) data_buf = m16_swap(1);
+		OK(2);
 	case RH_GET_STATUS | RH_INTERFACE:
-			*(__u16 *) data_buf = m16_swap (0); OK (2);
+		*(__u16 *) data_buf = m16_swap(0);
+		OK(2);
 	case RH_GET_STATUS | RH_ENDPOINT:
-			*(__u16 *) data_buf = m16_swap (0); OK (2);
+		*(__u16 *) data_buf = m16_swap(0);
+		OK(2);
 	case RH_GET_STATUS | RH_CLASS:
-			*(__u32 *) data_buf = m32_swap (
-				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
-			OK (4);
+		*(__u32 *) data_buf =
+		    m32_swap(RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+		OK(4);
 	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-			*(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+		*(__u32 *) data_buf = m32_swap(RD_RH_PORTSTAT);
+		OK(4);
 
 	case RH_CLEAR_FEATURE | RH_ENDPOINT:
 		switch (wValue) {
-			case (RH_ENDPOINT_STALL): OK (0);
+		case (RH_ENDPOINT_STALL):
+			OK(0);
 		}
 		break;
 
 	case RH_CLEAR_FEATURE | RH_CLASS:
 		switch (wValue) {
-			case RH_C_HUB_LOCAL_POWER:
-				OK(0);
-			case (RH_C_HUB_OVER_CURRENT):
-					WR_RH_STAT(RH_HS_OCIC); OK (0);
+		case RH_C_HUB_LOCAL_POWER:
+			OK(0);
+		case (RH_C_HUB_OVER_CURRENT):
+			WR_RH_STAT(RH_HS_OCIC);
+			OK(0);
 		}
 		break;
 
 	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
 		switch (wValue) {
-			case (RH_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
-			case (RH_C_PORT_CONNECTION):
-					WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
-			case (RH_C_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
-			case (RH_C_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
-			case (RH_C_PORT_OVER_CURRENT):
-					WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
-			case (RH_C_PORT_RESET):
-					WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+		case (RH_PORT_ENABLE):
+			WR_RH_PORTSTAT(RH_PS_CCS);
+			OK(0);
+		case (RH_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_POCI);
+			OK(0);
+		case (RH_PORT_POWER):
+			WR_RH_PORTSTAT(RH_PS_LSDA);
+			OK(0);
+		case (RH_C_PORT_CONNECTION):
+			WR_RH_PORTSTAT(RH_PS_CSC);
+			OK(0);
+		case (RH_C_PORT_ENABLE):
+			WR_RH_PORTSTAT(RH_PS_PESC);
+			OK(0);
+		case (RH_C_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_PSSC);
+			OK(0);
+		case (RH_C_PORT_OVER_CURRENT):
+			WR_RH_PORTSTAT(RH_PS_OCIC);
+			OK(0);
+		case (RH_C_PORT_RESET):
+			WR_RH_PORTSTAT(RH_PS_PRSC);
+			OK(0);
 		}
 		break;
 
 	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
 		switch (wValue) {
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
-			case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PRS);
-					OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
-			case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PES );
-					OK (0);
+		case (RH_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_PSS);
+			OK(0);
+		case (RH_PORT_RESET):	/* BUG IN HUP CODE ******** */
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PRS);
+			OK(0);
+		case (RH_PORT_POWER):
+			WR_RH_PORTSTAT(RH_PS_PPS);
+			OK(0);
+		case (RH_PORT_ENABLE):	/* BUG IN HUP CODE ******** */
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PES);
+			OK(0);
 		}
 		break;
 
-	case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+	case RH_SET_ADDRESS:
+		gohci.rh.devnum = wValue;
+		OK(0);
 
 	case RH_GET_DESCRIPTOR:
 		switch ((wValue & 0xff00) >> 8) {
-			case (0x01): /* device descriptor */
+		case (0x01):	/* device descriptor */
+			len = min_t(unsigned int,
+				    leni,
+				    min_t(unsigned int,
+					  sizeof(root_hub_dev_des), wLength));
+			data_buf = root_hub_dev_des;
+			OK(len);
+		case (0x02):	/* configuration descriptor */
+			len = min_t(unsigned int,
+				    leni,
+				    min_t(unsigned int,
+					  sizeof(root_hub_config_des),
+					  wLength));
+			data_buf = root_hub_config_des;
+			OK(len);
+		case (0x03):	/* string descriptors */
+			if (wValue == 0x0300) {
 				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_dev_des),
-					      wLength));
-				data_buf = root_hub_dev_des; OK(len);
-			case (0x02): /* configuration descriptor */
+					    leni,
+					    min_t(unsigned int,
+						  sizeof(root_hub_str_index0),
+						  wLength));
+				data_buf = root_hub_str_index0;
+				OK(len);
+			}
+			if (wValue == 0x0301) {
 				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_config_des),
-					      wLength));
-				data_buf = root_hub_config_des; OK(len);
-			case (0x03): /* string descriptors */
-				if(wValue==0x0300) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index0),
-						      wLength));
-					data_buf = root_hub_str_index0;
-					OK(len);
-				}
-				if(wValue==0x0301) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index1),
-						      wLength));
-					data_buf = root_hub_str_index1;
-					OK(len);
+					    leni,
+					    min_t(unsigned int,
+						  sizeof(root_hub_str_index1),
+						  wLength));
+				data_buf = root_hub_str_index1;
+				OK(len);
 			}
-			default:
-				stat = USB_ST_STALLED;
+		default:
+			stat = USB_ST_STALLED;
 		}
 		break;
 
 	case RH_GET_DESCRIPTOR | RH_CLASS:
-	    {
-		    __u32 temp = roothub_a (&gohci);
-
-		    data_buf [0] = 9;		/* min length; */
-		    data_buf [1] = 0x29;
-		    data_buf [2] = temp & RH_A_NDP;
-		    data_buf [3] = 0;
-		    if (temp & RH_A_PSM)	/* per-port power switching? */
-			data_buf [3] |= 0x1;
-		    if (temp & RH_A_NOCP)	/* no overcurrent reporting? */
-			data_buf [3] |= 0x10;
-		    else if (temp & RH_A_OCPM)	/* per-port overcurrent reporting? */
-			data_buf [3] |= 0x8;
-
-		    /* corresponds to data_buf[4-7] */
-		    datab [1] = 0;
-		    data_buf [5] = (temp & RH_A_POTPGT) >> 24;
-		    temp = roothub_b (&gohci);
-		    data_buf [7] = temp & RH_B_DR;
-		    if (data_buf [2] < 7) {
-			data_buf [8] = 0xff;
-		    } else {
-			data_buf [0] += 2;
-			data_buf [8] = (temp & RH_B_DR) >> 8;
-			data_buf [10] = data_buf [9] = 0xff;
-		    }
-
-		    len = min_t(unsigned int, leni,
-			      min_t(unsigned int, data_buf [0], wLength));
-		    OK (len);
+		{
+			__u32 temp = roothub_a(&gohci);
+
+			data_buf[0] = 9;	/* min length; */
+			data_buf[1] = 0x29;
+			data_buf[2] = temp & RH_A_NDP;
+			data_buf[3] = 0;
+			if (temp & RH_A_PSM)
+				/* per-port power switching? */
+				data_buf[3] |= 0x1;
+			if (temp & RH_A_NOCP)
+				/* no overcurrent reporting? */
+				data_buf[3] |= 0x10;
+			else if (temp & RH_A_OCPM)
+				/* per-port overcurrent reporting? */
+				data_buf[3] |= 0x8;
+
+			/* corresponds to data_buf[4-7] */
+			datab[1] = 0;
+			data_buf[5] = (temp & RH_A_POTPGT) >> 24;
+			temp = roothub_b(&gohci);
+			data_buf[7] = temp & RH_B_DR;
+			if (data_buf[2] < 7) {
+				data_buf[8] = 0xff;
+			} else {
+				data_buf[0] += 2;
+				data_buf[8] = (temp & RH_B_DR) >> 8;
+				data_buf[10] = data_buf[9] = 0xff;
+			}
+
+			len = min_t(unsigned int, leni,
+				    min_t(unsigned int, data_buf[0], wLength));
+			OK(len);
 		}
 
-	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK (1);
+	case RH_GET_CONFIGURATION:
+		*(__u8 *) data_buf = 0x01;
+		OK(1);
 
-	case RH_SET_CONFIGURATION:	WR_RH_STAT (0x10000); OK (0);
+	case RH_SET_CONFIGURATION:
+		WR_RH_STAT(0x10000);
+		OK(0);
 
 	default:
-		dbg ("unsupported root hub command");
+		dbg("unsupported root hub command");
 		stat = USB_ST_STALLED;
 	}
 
 #ifdef	DEBUG
-	ohci_dump_roothub (&gohci, 1);
+	ohci_dump_roothub(&gohci, 1);
 #else
 	wait_ms(1);
 #endif
 
 	len = min_t(int, len, leni);
 	if (data != data_buf)
-	    memcpy (data, data_buf, len);
+		memcpy(data, data_buf, len);
 	dev->act_len = len;
 	dev->status = stat;
 
 #ifdef DEBUG
 	if (transfer_len)
 		urb_priv.actual_length = transfer_len;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)",
+		  0 /*usb_pipein(pipe) */);
 #else
 	wait_ms(1);
 #endif
@@ -1223,7 +1288,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 /* common code for handling submit messages - used for all but root hub */
 /* accesses. */
 int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup, int interval)
+		      int transfer_len, struct devrequest *setup, int interval)
 {
 	int stat = 0;
 	int maxsize = usb_maxpacket(dev, pipe);
@@ -1234,20 +1299,21 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 		dev->status = USB_ST_CRC_ERR;
 		return 0;
 	}
-
 #ifdef DEBUG
 	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
+		  usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
 	if (!maxsize) {
 		err("submit_common_message: pipesize for pipe %lx is zero",
-			pipe);
+		    pipe);
 		return -1;
 	}
 
-	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) <
+	    0) {
 		err("sohci_submit_job failed");
 		return -1;
 	}
@@ -1256,7 +1322,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	/* ohci_dump_status(&gohci); */
 
 	/* allow more time for a BULK device to react - some are slow */
-#define BULK_TO	 5000	/* timeout in milliseconds */
+#define BULK_TO	 5000		/* timeout in milliseconds */
 	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
@@ -1304,13 +1370,14 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	/* we got an Root Hub Status Change interrupt */
 	if (got_rhsc) {
 #ifdef DEBUG
-		ohci_dump_roothub (&gohci, 1);
+		ohci_dump_roothub(&gohci, 1);
 #endif
 		got_rhsc = 0;
 		/* abuse timeout */
 		timeout = rh_check_port_status(&gohci);
 		if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
+#if 0			/* this does nothing useful, but leave it here
+			   in case that changes */
 			/* the called routine adds 1 to the passed value */
 			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
 #endif
@@ -1328,53 +1395,55 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	dev->act_len = transfer_len;
 
 #ifdef DEBUG
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)",
+		  usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
 
 	/* free TDs in urb_priv */
-	urb_free_priv (&urb_priv);
+	urb_free_priv(&urb_priv);
 	return 0;
 }
 
 /* submit routines called from usb.c */
 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len)
+		    int transfer_len)
 {
 	info("submit_bulk_msg");
 	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
 }
 
 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup)
+		       int transfer_len, struct devrequest *setup)
 {
 	int maxsize = usb_maxpacket(dev, pipe);
 
 	info("submit_control_msg");
 #ifdef DEBUG
 	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
+		  usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
 	if (!maxsize) {
 		err("submit_control_message: pipesize for pipe %lx is zero",
-			pipe);
+		    pipe);
 		return -1;
 	}
 	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
 		gohci.rh.dev = dev;
 		/* root hub - redirect */
 		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
-			setup);
+					  setup);
 	}
 
 	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
 }
 
 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, int interval)
+		   int transfer_len, int interval)
 {
 	info("submit_int_msg");
 	return -1;
@@ -1386,16 +1455,17 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 /* reset the HC and BUS */
 
-static int hc_reset (ohci_t *ohci)
+static int hc_reset(struct ohci *ohci)
 {
 	int timeout = 30;
-	int smm_timeout = 50; /* 0,5 sec */
+	int smm_timeout = 50;	/* 0,5 sec */
 
-	if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
-		writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+	if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+		/* SMM owns the HC - request ownership */
+		writel(OHCI_OCR, &ohci->regs->cmdstatus);
 		info("USB HC TakeOver from SMM");
-		while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
-			wait_ms (10);
+		while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+			wait_ms(10);
 			if (--smm_timeout == 0) {
 				err("USB HC TakeOver failed!");
 				return -1;
@@ -1404,23 +1474,22 @@ static int hc_reset (ohci_t *ohci)
 	}
 
 	/* Disable HC interrupts */
-	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
 
 	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
-		ohci->slot_name,
-		readl (&ohci->regs->control));
+	    ohci->slot_name, readl(&ohci->regs->control));
 
 	/* Reset USB (needed by some controllers) */
-	writel (0, &ohci->regs->control);
+	writel(0, &ohci->regs->control);
 
 	/* HC Reset requires max 10 us delay */
-	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
-	while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+	writel(OHCI_HCR, &ohci->regs->cmdstatus);
+	while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
 		if (--timeout == 0) {
 			err("USB HC reset timed out!");
 			return -1;
 		}
-		udelay (1);
+		udelay(1);
 	}
 	return 0;
 }
@@ -1431,7 +1500,7 @@ static int hc_reset (ohci_t *ohci)
  * enable interrupts
  * connect the virtual root hub */
 
-static int hc_start (ohci_t * ohci)
+static int hc_start(struct ohci *ohci)
 {
 	__u32 mask;
 	unsigned int fminterval;
@@ -1441,44 +1510,45 @@ static int hc_start (ohci_t * ohci)
 	/* Tell the controller where the control and bulk lists are
 	 * The lists are empty now. */
 
-	writel (0, &ohci->regs->ed_controlhead);
-	writel (0, &ohci->regs->ed_bulkhead);
+	writel(0, &ohci->regs->ed_controlhead);
+	writel(0, &ohci->regs->ed_bulkhead);
 
-	writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+	/* a reset clears this */
+	writel((__u32) ohci->hcca, &ohci->regs->hcca);
 
 	fminterval = 0x2edf;
-	writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+	writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
 	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
-	writel (fminterval, &ohci->regs->fminterval);
-	writel (0x628, &ohci->regs->lsthresh);
+	writel(fminterval, &ohci->regs->fminterval);
+	writel(0x628, &ohci->regs->lsthresh);
 
 	/* start controller operations */
 	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
 	ohci->disabled = 0;
-	writel (ohci->hc_control, &ohci->regs->control);
+	writel(ohci->hc_control, &ohci->regs->control);
 
 	/* disable all interrupts */
 	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
-			OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
-			OHCI_INTR_OC | OHCI_INTR_MIE);
-	writel (mask, &ohci->regs->intrdisable);
+		OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+		OHCI_INTR_OC | OHCI_INTR_MIE);
+	writel(mask, &ohci->regs->intrdisable);
 	/* clear all interrupts */
 	mask &= ~OHCI_INTR_MIE;
-	writel (mask, &ohci->regs->intrstatus);
+	writel(mask, &ohci->regs->intrstatus);
 	/* Choose the interrupts we care about now  - but w/o MIE */
 	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
-	writel (mask, &ohci->regs->intrenable);
+	writel(mask, &ohci->regs->intrenable);
 
 #ifdef	OHCI_USE_NPS
 	/* required for AMD-756 and some Mac platforms */
-	writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
-		&ohci->regs->roothub.a);
-	writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif	/* OHCI_USE_NPS */
+	writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
+	       &ohci->regs->roothub.a);
+	writel(RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
 
 #define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
 	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
 
 	/* connect the virtual root hub */
 	ohci->rh.devnum = 0;
@@ -1490,30 +1560,34 @@ static int hc_start (ohci_t * ohci)
 
 /* an interrupt happens */
 
-static int
-hc_interrupt (void)
+static int hc_interrupt(void)
 {
-	ohci_t *ohci = &gohci;
+	struct ohci *ohci = &gohci;
 	struct ohci_regs *regs = ohci->regs;
 	int ints;
 	int stat = -1;
 
 	if ((ohci->hcca->done_head != 0) &&
-	     !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+	    !(m32_swap(ohci->hcca->done_head) & 0x01)) {
 
-		ints =  OHCI_INTR_WDH;
+		ints = OHCI_INTR_WDH;
 
-	} else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
-		ohci->disabled++;
-		err ("%s device removed!", ohci->slot_name);
-		return -1;
-
-	} else if ((ints &= readl (&regs->intrenable)) == 0) {
-		dbg("hc_interrupt: returning..\n");
-		return 0xff;
+	} else {
+		ints = readl(&regs->intrstatus);
+		if (ints == ~(u32) 0) {
+			ohci->disabled++;
+			err("%s device removed!", ohci->slot_name);
+			return -1;
+		}
+		ints &= readl(&regs->intrenable);
+		if (ints == 0) {
+			dbg("hc_interrupt: returning..\n");
+			return 0xff;
+		}
 	}
 
-	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+	/* dbg("Interrupt: %x frame: %x", ints,
+	    le16_to_cpu(ohci->hcca->frame_no)); */
 
 	if (ints & OHCI_INTR_RHSC) {
 		got_rhsc = 1;
@@ -1522,48 +1596,48 @@ hc_interrupt (void)
 
 	if (ints & OHCI_INTR_UE) {
 		ohci->disabled++;
-		err ("OHCI Unrecoverable Error, controller usb-%s disabled",
-			ohci->slot_name);
+		err("OHCI Unrecoverable Error, controller usb-%s disabled",
+		    ohci->slot_name);
 		/* e.g. due to PCI Master/Target Abort */
 
 #ifdef	DEBUG
-		ohci_dump (ohci, 1);
+		ohci_dump(ohci, 1);
 #else
-	wait_ms(1);
+		wait_ms(1);
 #endif
 		/* FIXME: be optimistic, hope that bug won't repeat often. */
 		/* Make some non-interrupt context restart the controller. */
 		/* Count and limit the retries though; either hardware or */
 		/* software errors can go forever... */
-		hc_reset (ohci);
+		hc_reset(ohci);
 		return -1;
 	}
 
 	if (ints & OHCI_INTR_WDH) {
 		wait_ms(1);
 
-		writel (OHCI_INTR_WDH, &regs->intrdisable);
-		stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
-		writel (OHCI_INTR_WDH, &regs->intrenable);
+		writel(OHCI_INTR_WDH, &regs->intrdisable);
+		stat = dl_done_list(&gohci, dl_reverse_done_list(&gohci));
+		writel(OHCI_INTR_WDH, &regs->intrenable);
 	}
 
 	if (ints & OHCI_INTR_SO) {
 		dbg("USB Schedule overrun\n");
-		writel (OHCI_INTR_SO, &regs->intrenable);
+		writel(OHCI_INTR_SO, &regs->intrenable);
 		stat = -1;
 	}
 
 	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
 	if (ints & OHCI_INTR_SF) {
-		unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
+		unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
 		wait_ms(1);
-		writel (OHCI_INTR_SF, &regs->intrdisable);
+		writel(OHCI_INTR_SF, &regs->intrdisable);
 		if (ohci->ed_rm_list[frame] != NULL)
-			writel (OHCI_INTR_SF, &regs->intrenable);
+			writel(OHCI_INTR_SF, &regs->intrenable);
 		stat = 0xff;
 	}
 
-	writel (ints, &regs->intrstatus);
+	writel(ints, &regs->intrstatus);
 	return stat;
 }
 
@@ -1573,12 +1647,12 @@ hc_interrupt (void)
 
 /* De-allocate all resources.. */
 
-static void hc_release_ohci (ohci_t *ohci)
+static void hc_release_ohci(struct ohci *ohci)
 {
-	dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+	dbg("USB HC release ohci usb-%s", ohci->slot_name);
 
 	if (!ohci->disabled)
-		hc_reset (ohci);
+		hc_reset(ohci);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1590,44 +1664,44 @@ static char ohci_inited = 0;
 
 int usb_lowlevel_init(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 	/*
 	 * Set the 48 MHz UPLL clocking. Values are taken from
 	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
 	 */
 	clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
-	gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+	gpio->MISCCR |= 0x8;	/* 1 = use pads related USB for USB host */
 
 	/*
 	 * Enable USB host clock.
 	 */
 	clk_power->CLKCON |= (1 << 4);
 
-	memset (&gohci, 0, sizeof (ohci_t));
-	memset (&urb_priv, 0, sizeof (urb_priv_t));
+	memset(&gohci, 0, sizeof(struct ohci));
+	memset(&urb_priv, 0, sizeof(struct urb_priv));
 
 	/* align the storage */
-	if ((__u32)&ghcca[0] & 0xff) {
+	if ((__u32) &ghcca[0] & 0xff) {
 		err("HCCA not aligned!!");
 		return -1;
 	}
 	phcca = &ghcca[0];
 	info("aligned ghcca %p", phcca);
 	memset(&ohci_dev, 0, sizeof(struct ohci_device));
-	if ((__u32)&ohci_dev.ed[0] & 0x7) {
+	if ((__u32) &ohci_dev.ed[0] & 0x7) {
 		err("EDs not aligned!!");
 		return -1;
 	}
-	memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
-	if ((__u32)gtd & 0x7) {
+	memset(gtd, 0, sizeof(struct td) * (NUM_TD + 1));
+	if ((__u32) gtd & 0x7) {
 		err("TDs not aligned!!");
 		return -1;
 	}
 	ptd = gtd;
 	gohci.hcca = phcca;
-	memset (phcca, 0, sizeof (struct ohci_hcca));
+	memset(phcca, 0, sizeof(struct ohci_hcca));
 
 	gohci.disabled = 1;
 	gohci.sleeping = 0;
@@ -1637,8 +1711,8 @@ int usb_lowlevel_init(void)
 	gohci.flags = 0;
 	gohci.slot_name = "s3c2400";
 
-	if (hc_reset (&gohci) < 0) {
-		hc_release_ohci (&gohci);
+	if (hc_reset(&gohci) < 0) {
+		hc_release_ohci(&gohci);
 		/* Initialization failed */
 		clk_power->CLKCON &= ~(1 << 4);
 		return -1;
@@ -1646,19 +1720,18 @@ int usb_lowlevel_init(void)
 
 	/* FIXME this is a second HC reset; why?? */
 	gohci.hc_control = OHCI_USB_RESET;
-	writel (gohci.hc_control, &gohci.regs->control);
-	wait_ms (10);
+	writel(gohci.hc_control, &gohci.regs->control);
+	wait_ms(10);
 
-	if (hc_start (&gohci) < 0) {
-		err ("can't start usb-%s", gohci.slot_name);
-		hc_release_ohci (&gohci);
+	if (hc_start(&gohci) < 0) {
+		err("can't start usb-%s", gohci.slot_name);
+		hc_release_ohci(&gohci);
 		/* Initialization failed */
 		clk_power->CLKCON &= ~(1 << 4);
 		return -1;
 	}
-
 #ifdef	DEBUG
-	ohci_dump (&gohci, 1);
+	ohci_dump(&gohci, 1);
 #else
 	wait_ms(1);
 #endif
@@ -1670,7 +1743,7 @@ int usb_lowlevel_init(void)
 
 int usb_lowlevel_stop(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
 
 	/* this gets called really early - before the controller has */
 	/* even been initialized! */
@@ -1678,7 +1751,7 @@ int usb_lowlevel_stop(void)
 		return 0;
 	/* TODO release any interrupts, etc. */
 	/* call hc_release_ohci() here ? */
-	hc_reset (&gohci);
+	hc_reset(&gohci);
 	/* may not want to do this */
 	clk_power->CLKCON &= ~(1 << 4);
 	return 0;
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.h b/cpu/arm920t/s3c24x0/usb_ohci.h
index 8e093fbfc6..f272d78859 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.h
+++ b/cpu/arm920t/s3c24x0/usb_ohci.h
@@ -11,22 +11,22 @@
 static int cc_to_error[16] = {
 
 /* mapping of the OHCI CC status to error codes */
-	/* No  Error  */	       0,
-	/* CRC Error  */	       USB_ST_CRC_ERR,
-	/* Bit Stuff  */	       USB_ST_BIT_ERR,
-	/* Data Togg  */	       USB_ST_CRC_ERR,
-	/* Stall      */	       USB_ST_STALLED,
-	/* DevNotResp */	       -1,
-	/* PIDCheck   */	       USB_ST_BIT_ERR,
-	/* UnExpPID   */	       USB_ST_BIT_ERR,
-	/* DataOver   */	       USB_ST_BUF_ERR,
-	/* DataUnder  */	       USB_ST_BUF_ERR,
-	/* reservd    */	       -1,
-	/* reservd    */	       -1,
-	/* BufferOver */	       USB_ST_BUF_ERR,
-	/* BuffUnder  */	       USB_ST_BUF_ERR,
-	/* Not Access */	       -1,
-	/* Not Access */	       -1
+	/* No  Error  */ 0,
+	/* CRC Error  */ USB_ST_CRC_ERR,
+	/* Bit Stuff  */ USB_ST_BIT_ERR,
+	/* Data Togg  */ USB_ST_CRC_ERR,
+	/* Stall      */ USB_ST_STALLED,
+	/* DevNotResp */ -1,
+	/* PIDCheck   */ USB_ST_BIT_ERR,
+	/* UnExpPID   */ USB_ST_BIT_ERR,
+	/* DataOver   */ USB_ST_BUF_ERR,
+	/* DataUnder  */ USB_ST_BUF_ERR,
+	/* reservd    */ -1,
+	/* reservd    */ -1,
+	/* BufferOver */ USB_ST_BUF_ERR,
+	/* BuffUnder  */ USB_ST_BUF_ERR,
+	/* Not Access */ -1,
+	/* Not Access */ -1
 };
 
 /* ED States */
@@ -55,14 +55,13 @@ struct ed {
 
 	struct usb_device *usb_dev;
 	__u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
+} __attribute__ ((aligned(16)));
 
 /* TD info field */
 #define TD_CC			0xf0000000
-#define TD_CC_GET(td_p)		((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc)	(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_CC_GET(td_p)		(((td_p) >> 28) & 0x0f)
+#define TD_CC_SET(td_p, cc) \
+	{(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)}
 #define TD_EC			0x0C000000
 #define TD_T			0x03000000
 #define TD_T_DATA0		0x02000000
@@ -112,8 +111,7 @@ struct td {
 	__u32 data;
 
 	__u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
+} __attribute__ ((aligned(32)));
 
 #define OHCI_ED_SKIP	(1 << 14)
 
@@ -123,15 +121,14 @@ typedef struct td td_t;
  * told the base address of.  It must be 256-byte aligned.
  */
 
-#define NUM_INTS 32	/* part of the OHCI standard */
+#define NUM_INTS 32		/* part of the OHCI standard */
 struct ohci_hcca {
-	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
-	__u16	frame_no;		/* current frame number */
-	__u16	pad1;			/* set to 0 on each frame_no change */
-	__u32	done_head;		/* info returned for an interrupt */
-	u8	reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
+	__u32 int_table[NUM_INTS];	/* Interrupt ED table */
+	__u16 frame_no;		/* current frame number */
+	__u16 pad1;		/* set to 0 on each frame_no change */
+	__u32 done_head;	/* info returned for an interrupt */
+	u8 reserved_for_hc[116];
+} __attribute__ ((aligned(256)));
 
 /*
  * Maximum number of root hub ports.
@@ -145,35 +142,34 @@ struct ohci_hcca {
  */
 struct ohci_regs {
 	/* control and status registers */
-	__u32	revision;
-	__u32	control;
-	__u32	cmdstatus;
-	__u32	intrstatus;
-	__u32	intrenable;
-	__u32	intrdisable;
+	__u32 revision;
+	__u32 control;
+	__u32 cmdstatus;
+	__u32 intrstatus;
+	__u32 intrenable;
+	__u32 intrdisable;
 	/* memory pointers */
-	__u32	hcca;
-	__u32	ed_periodcurrent;
-	__u32	ed_controlhead;
-	__u32	ed_controlcurrent;
-	__u32	ed_bulkhead;
-	__u32	ed_bulkcurrent;
-	__u32	donehead;
+	__u32 hcca;
+	__u32 ed_periodcurrent;
+	__u32 ed_controlhead;
+	__u32 ed_controlcurrent;
+	__u32 ed_bulkhead;
+	__u32 ed_bulkcurrent;
+	__u32 donehead;
 	/* frame counters */
-	__u32	fminterval;
-	__u32	fmremaining;
-	__u32	fmnumber;
-	__u32	periodicstart;
-	__u32	lsthresh;
+	__u32 fminterval;
+	__u32 fmremaining;
+	__u32 fmnumber;
+	__u32 periodicstart;
+	__u32 lsthresh;
 	/* Root hub ports */
-	struct	ohci_roothub_regs {
-		__u32	a;
-		__u32	b;
-		__u32	status;
-		__u32	portstatus[MAX_ROOT_PORTS];
+	struct ohci_roothub_regs {
+		__u32 a;
+		__u32 b;
+		__u32 status;
+		__u32 portstatus[MAX_ROOT_PORTS];
 	} roothub;
-} __attribute__((aligned(32)));
-
+} __attribute__ ((aligned(32)));
 
 /* OHCI CONTROL AND STATUS REGISTER MASKS */
 
@@ -221,11 +217,10 @@ struct ohci_regs {
 #define OHCI_INTR_OC	(1 << 30)	/* ownership change */
 #define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
 
-
 /* Virtual Root HUB */
 struct virt_root_hub {
-	int devnum; /* Address of Root Hub endpoint */
-	void *dev;  /* was urb */
+	int devnum;		/* Address of Root Hub endpoint */
+	void *dev;		/* was urb */
 	void *int_addr;
 	int send;
 	int interval;
@@ -288,52 +283,52 @@ struct virt_root_hub {
 /* OHCI ROOT HUB REGISTER MASKS */
 
 /* roothub.portstatus [i] bits */
-#define RH_PS_CCS		0x00000001	/* current connect status */
-#define RH_PS_PES		0x00000002	/* port enable status*/
-#define RH_PS_PSS		0x00000004	/* port suspend status */
-#define RH_PS_POCI		0x00000008	/* port over current indicator */
-#define RH_PS_PRS		0x00000010	/* port reset status */
-#define RH_PS_PPS		0x00000100	/* port power status */
-#define RH_PS_LSDA		0x00000200	/* low speed device attached */
-#define RH_PS_CSC		0x00010000	/* connect status change */
-#define RH_PS_PESC		0x00020000	/* port enable status change */
-#define RH_PS_PSSC		0x00040000	/* port suspend status change */
-#define RH_PS_OCIC		0x00080000	/* over current indicator change */
-#define RH_PS_PRSC		0x00100000	/* port reset status change */
+#define RH_PS_CCS		0x00000001 /* current connect status */
+#define RH_PS_PES		0x00000002 /* port enable status */
+#define RH_PS_PSS		0x00000004 /* port suspend status */
+#define RH_PS_POCI		0x00000008 /* port over current indicator */
+#define RH_PS_PRS		0x00000010 /* port reset status */
+#define RH_PS_PPS		0x00000100 /* port power status */
+#define RH_PS_LSDA		0x00000200 /* low speed device attached */
+#define RH_PS_CSC		0x00010000 /* connect status change */
+#define RH_PS_PESC		0x00020000 /* port enable status change */
+#define RH_PS_PSSC		0x00040000 /* port suspend status change */
+#define RH_PS_OCIC		0x00080000 /* over current indicator change */
+#define RH_PS_PRSC		0x00100000 /* port reset status change */
 
 /* roothub.status bits */
-#define RH_HS_LPS		0x00000001	/* local power status */
-#define RH_HS_OCI		0x00000002	/* over current indicator */
-#define RH_HS_DRWE		0x00008000	/* device remote wakeup enable */
-#define RH_HS_LPSC		0x00010000	/* local power status change */
-#define RH_HS_OCIC		0x00020000	/* over current indicator change */
-#define RH_HS_CRWE		0x80000000	/* clear remote wakeup enable */
+#define RH_HS_LPS		0x00000001 /* local power status */
+#define RH_HS_OCI		0x00000002 /* over current indicator */
+#define RH_HS_DRWE		0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC		0x00010000 /* local power status change */
+#define RH_HS_OCIC		0x00020000 /* over current indicator change */
+#define RH_HS_CRWE		0x80000000 /* clear remote wakeup enable */
 
 /* roothub.b masks */
-#define RH_B_DR			0x0000ffff	/* device removable flags */
-#define RH_B_PPCM		0xffff0000	/* port power control mask */
+#define RH_B_DR			0x0000ffff /* device removable flags */
+#define RH_B_PPCM		0xffff0000 /* port power control mask */
 
 /* roothub.a masks */
-#define	RH_A_NDP		(0xff << 0)	/* number of downstream ports */
-#define	RH_A_PSM		(1 << 8)	/* power switching mode */
-#define	RH_A_NPS		(1 << 9)	/* no power switching */
-#define	RH_A_DT			(1 << 10)	/* device type (mbz) */
-#define	RH_A_OCPM		(1 << 11)	/* over current protection mode */
-#define	RH_A_NOCP		(1 << 12)	/* no over current protection */
-#define	RH_A_POTPGT		(0xff << 24)	/* power on to power good time */
+#define	RH_A_NDP		(0xff << 0)  /* number of downstream ports */
+#define	RH_A_PSM		(1 << 8)     /* power switching mode */
+#define	RH_A_NPS		(1 << 9)     /* no power switching */
+#define	RH_A_DT			(1 << 10)    /* device type (mbz) */
+#define	RH_A_OCPM		(1 << 11)    /* over current protection mode */
+#define	RH_A_NOCP		(1 << 12)    /* no over current protection */
+#define	RH_A_POTPGT		(0xff << 24) /* power on to power good time */
 
 /* urb */
 #define N_URB_TD 48
-typedef struct
-{
-	ed_t *ed;
-	__u16 length;	/* number of tds associated with this request */
-	__u16 td_cnt;	/* number of tds already serviced */
-	int   state;
+struct urb_priv {
+	struct ed *ed;
+	__u16 length;		/* number of tds associated with this request */
+	__u16 td_cnt;		/* number of tds already serviced */
+	int state;
 	unsigned long pipe;
 	int actual_length;
-	td_t *td[N_URB_TD];	/* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
+	struct td *td[N_URB_TD];	/* list pointer to all corresponding TDs
+					   associated with this request */
+};
 #define URB_DEL 1
 
 /*
@@ -344,7 +339,7 @@ typedef struct
  */
 
 
-typedef struct ohci {
+struct ohci {
 	struct ohci_hcca *hcca;	/* hcca */
 	/*dma_addr_t hcca_dma; */
 
@@ -355,29 +350,29 @@ typedef struct ohci {
 
 	struct ohci_regs *regs;	/* OHCI controller's memory */
 
-	ed_t *ed_rm_list[2];	/* lists of all endpoints to be removed */
-	ed_t *ed_bulktail;	/* last endpoint of bulk list */
-	ed_t *ed_controltail;	/* last endpoint of control list */
+	struct ed *ed_rm_list[2];  /* lists of all endpoints to be removed */
+	struct ed *ed_bulktail;    /* last endpoint of bulk list */
+	struct ed *ed_controltail; /* last endpoint of control list */
 	int intrstatus;
 	__u32 hc_control;	/* copy of the hc control reg */
 	struct usb_device *dev[32];
 	struct virt_root_hub rh;
 
 	const char *slot_name;
-} ohci_t;
+};
 
 #define NUM_EDS 8		/* num of preallocated endpoint descriptors */
 
 struct ohci_device {
-	ed_t ed[NUM_EDS];
+	struct ed ed[NUM_EDS];
 	int ed_cnt;
 };
 
 /* hcd */
 /* endpoint */
-static int ep_link (ohci_t * ohci, ed_t * ed);
-static int ep_unlink (ohci_t * ohci, ed_t * ed);
-static ed_t *ep_add_ed (struct usb_device *usb_dev, unsigned long pipe);
+static int ep_link(struct ohci *ohci, struct ed *ed);
+static int ep_unlink(struct ohci *ohci, struct ed *ed);
+static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
 
 /*-------------------------------------------------------------------------*/
 
@@ -385,13 +380,13 @@ static ed_t *ep_add_ed (struct usb_device *usb_dev, unsigned long pipe);
 #define NUM_TD 64
 
 /* +1 so we can align the storage */
-td_t gtd[NUM_TD + 1];
+struct td gtd[NUM_TD + 1];
 
 /* pointers to aligned storage */
-td_t *ptd;
+struct td *ptd;
 
 /* TDs ... */
-static inline struct td *td_alloc (struct usb_device *usb_dev)
+static inline struct td *td_alloc(struct usb_device *usb_dev)
 {
 	int i;
 	struct td *td;
@@ -408,7 +403,7 @@ static inline struct td *td_alloc (struct usb_device *usb_dev)
 	return td;
 }
 
-static inline void ed_free (struct ed *ed)
+static inline void ed_free(struct ed *ed)
 {
 	ed->usb_dev = NULL;
 }
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 27f38b8089..114427a16e 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -37,7 +37,7 @@
 
 
 .globl _start
-_start:	b       start_code
+_start:	b	start_code
 	ldr	pc, _undefined_instruction
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
@@ -109,13 +109,13 @@ start_code:
 	/*
 	 * set the cpu to SVC32 mode
 	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
+	mrs	r0, cpsr
+	bic	r0, r0, #0x1f
+	orr	r0, r0, #0xd3
+	msr	cpsr, r0
 
-	bl coloured_LED_init
-	bl red_LED_on
+	bl	coloured_LED_init
+	bl	red_LED_on
 
 #if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
 	/*
@@ -135,19 +135,19 @@ copyex:
 	/* turn off the watchdog */
 
 # if defined(CONFIG_S3C2400)
-#  define pWTCON		0x15300000
-#  define INTMSK		0x14400008	/* Interupt-Controller base addresses */
+#  define pWTCON	0x15300000
+#  define INTMSK	0x14400008	/* Interupt-Controller base addresses */
 #  define CLKDIVN	0x14800014	/* clock divisor register */
 #else
-#  define pWTCON		0x53000000
-#  define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
+#  define pWTCON	0x53000000
+#  define INTMSK	0x4A000008	/* Interupt-Controller base addresses */
 #  define INTSUBMSK	0x4A00001C
 #  define CLKDIVN	0x4C000014	/* clock divisor register */
 # endif
 
-	ldr     r0, =pWTCON
-	mov     r1, #0x0
-	str     r1, [r0]
+	ldr	r0, =pWTCON
+	mov	r1, #0x0
+	str	r1, [r0]
 
 	/*
 	 * mask all IRQs by setting all bits in the INTMR - default
@@ -180,8 +180,8 @@ copyex:
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
+	cmp	r0, r1			/* don't reloc during debug         */
+	beq	stack_setup
 
 	ldr	r2, _armboot_start
 	ldr	r3, _bss_start
@@ -198,8 +198,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area              */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                 */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -297,8 +297,8 @@ cpu_init_crit:
 #define S_R1		4
 #define S_R0		0
 
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
+#define MODE_SVC	0x13
+#define I_BIT		0x80
 
 /*
  * use bad_save_user_regs for abort/prefetch/undef/swi ...
@@ -311,7 +311,8 @@ cpu_init_crit:
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE)
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	/* set base 2 words into abort stack */
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -324,12 +325,12 @@ cpu_init_crit:
 	.macro	irq_save_user_regs
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add     r7, sp, #S_PC
-	stmdb   r7, {sp, lr}^                   @ Calling SP, LR
-	str     lr, [r7, #0]                    @ Save calling PC
-	mrs     r6, spsr
-	str     r6, [r7, #4]                    @ Save CPSR
-	str     r0, [r7, #8]                    @ Save OLD_R0
+	add	r7, sp, #S_PC
+	stmdb	r7, {sp, lr}^			@ Calling SP, LR
+	str	lr, [r7, #0]			@ Save calling PC
+	mrs	r6, spsr
+	str	r6, [r7, #4]			@ Save CPSR
+	str	r0, [r7, #8]			@ Save OLD_R0
 	mov	r0, sp
 	.endm
 
@@ -338,18 +339,20 @@ cpu_init_crit:
 	mov	r0, r0
 	ldr	lr, [sp, #S_PC]			@ Get PC
 	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	/* return & move spsr_svc into cpsr */
+	subs	pc, lr, #4
 	.endm
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE)
 	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	/* reserve a couple spots in abort stack */
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8)
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
-	str     lr, [r13, #4]
+	str	lr, [r13, #4]
 
 	mov	r13, #MODE_SVC			@ prepare SVC-Mode
 	@ msr	spsr_c, r13
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 8043322583..4421b6a990 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -172,6 +172,7 @@ stack_setup:
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+	bic	sp, r0, #7		/* 8-byte align stack for ABI compliance */
 
 clear_bss:
 	ldr	r0, _bss_start		/* find start of bss segment        */
diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
index 079c848701..8b8cd6d617 100644
--- a/cpu/arm_cortexa8/omap3/mem.c
+++ b/cpu/arm_cortexa8/omap3/mem.c
@@ -44,7 +44,7 @@ volatile unsigned int boot_flash_env_addr;
 struct gpmc *gpmc_cfg;
 
 #if defined(CONFIG_CMD_NAND)
-static u32 gpmc_m_nand[GPMC_MAX_REG] = {
+static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG1,
 	M_NAND_GPMC_CONFIG2,
 	M_NAND_GPMC_CONFIG3,
@@ -62,7 +62,7 @@ static u32 gpmc_m_nand[GPMC_MAX_REG] = {
 #endif
 
 #if defined(CONFIG_CMD_ONENAND)
-static u32 gpmc_onenand[GPMC_MAX_REG] = {
+static const u32 gpmc_onenand[GPMC_MAX_REG] = {
 	ONENAND_GPMC_CONFIG1,
 	ONENAND_GPMC_CONFIG2,
 	ONENAND_GPMC_CONFIG3,
@@ -92,7 +92,7 @@ void make_cs1_contiguous(void)
 	u32 size, a_add_low, a_add_high;
 
 	size = get_sdr_cs_size(CS0);
-	size /= SZ_32M;			/* find size to offset CS1 */
+	size >>= 25;	/* divide by 32 MiB to find size to offset CS1 */
 	a_add_high = (size & 3) << 8;	/* set up low field */
 	a_add_low = (size & 0x3C) >> 2;	/* set up high field */
 	writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
@@ -192,7 +192,7 @@ void do_sdrc_init(u32 cs, u32 early)
 		writel(0, &sdrc_base->cs[cs].mcfg);
 }
 
-void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 			u32 size)
 {
 	writel(0, &cs->config7);
@@ -218,12 +218,16 @@ void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 void gpmc_init(void)
 {
 	/* putting a blanket check on GPMC based on ZeBu for now */
-	u32 *gpmc_config = NULL;
 	gpmc_cfg = (struct gpmc *)GPMC_BASE;
+#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND)
+	const u32 *gpmc_config = NULL;
 	u32 base = 0;
 	u32 size = 0;
+#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
 	u32 f_off = CONFIG_SYS_MONITOR_LEN;
 	u32 f_sec = 0;
+#endif
+#endif
 	u32 config = 0;
 
 	/* global settings */
@@ -249,7 +253,7 @@ void gpmc_init(void)
 	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
 #if defined(CONFIG_ENV_IS_IN_NAND)
 	f_off = SMNAND_ENV_OFFSET;
-	f_sec = SZ_128K;
+	f_sec = (128 << 10);	/* 128 KiB */
 	/* env setup */
 	boot_flash_base = base;
 	boot_flash_off = f_off;
@@ -265,7 +269,7 @@ void gpmc_init(void)
 	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
 	f_off = ONENAND_ENV_OFFSET;
-	f_sec = SZ_128K;
+	f_sec = (128 << 10);	/* 128 KiB */
 	/* env setup */
 	boot_flash_base = base;
 	boot_flash_off = f_off;
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index 765aaf2b37..31b20033cc 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -124,7 +124,7 @@ u32 get_sdr_cs_size(u32 cs)
 	/* get ram size field */
 	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
 	size &= 0x3FF;		/* remove unwanted bits */
-	size *= SZ_2M;		/* find size in MB */
+	size <<= 21;		/* multiply by 2 MiB to find size in MB */
 	return size;
 }
 
diff --git a/cpu/arm_cortexa8/s5pc1xx/Makefile b/cpu/arm_cortexa8/s5pc1xx/Makefile
new file mode 100644
index 0000000000..e08d9d87b7
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+SOBJS	= reset.o
+
+COBJS	+= cache.o
+COBJS	+= clock.o
+COBJS	+= cpu_info.o
+COBJS	+= timer.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all:	 $(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm_cortexa8/s5pc1xx/cache.c b/cpu/arm_cortexa8/s5pc1xx/cache.c
new file mode 100644
index 0000000000..8652a45ff0
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/cache.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/cache.h>
+
+void l2_cache_enable(void)
+{
+	unsigned long i;
+
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
+	__asm__ __volatile__("orr %0, %0, #0x2":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
+}
+
+void l2_cache_disable(void)
+{
+	unsigned long i;
+
+	__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
+	__asm__ __volatile__("bic %0, %0, #0x2":"=r"(i));
+	__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
+}
diff --git a/cpu/arm_cortexa8/s5pc1xx/clock.c b/cpu/arm_cortexa8/s5pc1xx/clock.c
new file mode 100644
index 0000000000..a9e78dd793
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/clock.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+#define APLL	0
+#define MPLL	1
+#define EPLL	2
+#define HPLL	3
+#define VPLL	4
+
+#define CLK_M	0
+#define CLK_D	1
+#define CLK_P	2
+
+#ifndef CONFIG_SYS_CLK_FREQ_C100
+#define CONFIG_SYS_CLK_FREQ_C100	12000000
+#endif
+#ifndef CONFIG_SYS_CLK_FREQ_C110
+#define CONFIG_SYS_CLK_FREQ_C110	24000000
+#endif
+
+unsigned long (*get_pclk)(void);
+unsigned long (*get_arm_clk)(void);
+unsigned long (*get_pll_clk)(int);
+
+/* s5pc110: return pll clock frequency */
+static unsigned long s5pc100_get_pll_clk(int pllreg)
+{
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long r, m, p, s, mask, fout;
+	unsigned int freq;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con);
+		break;
+	case HPLL:
+		r = readl(&clk->hpll_con);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	/*
+	 * APLL_CON: MIDV [25:16]
+	 * MPLL_CON: MIDV [23:16]
+	 * EPLL_CON: MIDV [23:16]
+	 * HPLL_CON: MIDV [23:16]
+	 */
+	if (pllreg == APLL)
+		mask = 0x3ff;
+	else
+		mask = 0x0ff;
+
+	m = (r >> 16) & mask;
+
+	/* PDIV [13:8] */
+	p = (r >> 8) & 0x3f;
+	/* SDIV [2:0] */
+	s = r & 0x7;
+
+	/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+	freq = CONFIG_SYS_CLK_FREQ_C100;
+	fout = m * (freq / (p * (1 << s)));
+
+	return fout;
+}
+
+/* s5pc100: return pll clock frequency */
+static unsigned long s5pc110_get_pll_clk(int pllreg)
+{
+	struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long r, m, p, s, mask, fout;
+	unsigned int freq;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	/*
+	 * APLL_CON: MIDV [25:16]
+	 * MPLL_CON: MIDV [25:16]
+	 * EPLL_CON: MIDV [24:16]
+	 * VPLL_CON: MIDV [24:16]
+	 */
+	if (pllreg == APLL || pllreg == MPLL)
+		mask = 0x3ff;
+	else
+		mask = 0x1ff;
+
+	m = (r >> 16) & mask;
+
+	/* PDIV [13:8] */
+	p = (r >> 8) & 0x3f;
+	/* SDIV [2:0] */
+	s = r & 0x7;
+
+	freq = CONFIG_SYS_CLK_FREQ_C110;
+	if (pllreg == APLL) {
+		if (s < 1)
+			s = 1;
+		/* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
+		fout = m * (freq / (p * (1 << (s - 1))));
+	} else
+		/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+		fout = m * (freq / (p * (1 << s)));
+
+	return fout;
+}
+
+/* s5pc110: return ARM clock frequency */
+static unsigned long s5pc110_get_arm_clk(void)
+{
+	struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long div;
+	unsigned long dout_apll, armclk;
+	unsigned int apll_ratio;
+
+	div = readl(&clk->div0);
+
+	/* APLL_RATIO: [2:0] */
+	apll_ratio = div & 0x7;
+
+	dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+	armclk = dout_apll;
+
+	return armclk;
+}
+
+/* s5pc100: return ARM clock frequency */
+static unsigned long s5pc100_get_arm_clk(void)
+{
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long div;
+	unsigned long dout_apll, armclk;
+	unsigned int apll_ratio, arm_ratio;
+
+	div = readl(&clk->div0);
+
+	/* ARM_RATIO: [6:4] */
+	arm_ratio = (div >> 4) & 0x7;
+	/* APLL_RATIO: [0] */
+	apll_ratio = div & 0x1;
+
+	dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+	armclk = dout_apll / (arm_ratio + 1);
+
+	return armclk;
+}
+
+/* s5pc100: return HCLKD0 frequency */
+static unsigned long get_hclk(void)
+{
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long hclkd0;
+	uint div, d0_bus_ratio;
+
+	div = readl(&clk->div0);
+	/* D0_BUS_RATIO: [10:8] */
+	d0_bus_ratio = (div >> 8) & 0x7;
+
+	hclkd0 = get_arm_clk() / (d0_bus_ratio + 1);
+
+	return hclkd0;
+}
+
+/* s5pc100: return PCLKD1 frequency */
+static unsigned long get_pclkd1(void)
+{
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long d1_bus, pclkd1;
+	uint div, d1_bus_ratio, pclkd1_ratio;
+
+	div = readl(&clk->div0);
+	/* D1_BUS_RATIO: [14:12] */
+	d1_bus_ratio = (div >> 12) & 0x7;
+	/* PCLKD1_RATIO: [18:16] */
+	pclkd1_ratio = (div >> 16) & 0x7;
+
+	/* ASYNC Mode */
+	d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1);
+	pclkd1 = d1_bus / (pclkd1_ratio + 1);
+
+	return pclkd1;
+}
+
+/* s5pc110: return HCLKs frequency */
+static unsigned long get_hclk_sys(int dom)
+{
+	struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long hclk;
+	unsigned int div;
+	unsigned int offset;
+	unsigned int hclk_sys_ratio;
+
+	if (dom == CLK_M)
+		return get_hclk();
+
+	div = readl(&clk->div0);
+
+	/*
+	 * HCLK_MSYS_RATIO: [10:8]
+	 * HCLK_DSYS_RATIO: [19:16]
+	 * HCLK_PSYS_RATIO: [27:24]
+	 */
+	offset = 8 + (dom << 0x3);
+
+	hclk_sys_ratio = (div >> offset) & 0xf;
+
+	hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1);
+
+	return hclk;
+}
+
+/* s5pc110: return PCLKs frequency */
+static unsigned long get_pclk_sys(int dom)
+{
+	struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+	unsigned long pclk;
+	unsigned int div;
+	unsigned int offset;
+	unsigned int pclk_sys_ratio;
+
+	div = readl(&clk->div0);
+
+	/*
+	 * PCLK_MSYS_RATIO: [14:12]
+	 * PCLK_DSYS_RATIO: [22:20]
+	 * PCLK_PSYS_RATIO: [30:28]
+	 */
+	offset = 12 + (dom << 0x3);
+
+	pclk_sys_ratio = (div >> offset) & 0x7;
+
+	pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1);
+
+	return pclk;
+}
+
+/* s5pc110: return peripheral clock frequency */
+static unsigned long s5pc110_get_pclk(void)
+{
+	return get_pclk_sys(CLK_P);
+}
+
+/* s5pc100: return peripheral clock frequency */
+static unsigned long s5pc100_get_pclk(void)
+{
+	return get_pclkd1();
+}
+
+void s5pc1xx_clock_init(void)
+{
+	if (cpu_is_s5pc110()) {
+		get_pll_clk = s5pc110_get_pll_clk;
+		get_arm_clk = s5pc110_get_arm_clk;
+		get_pclk = s5pc110_get_pclk;
+	} else {
+		get_pll_clk = s5pc100_get_pll_clk;
+		get_arm_clk = s5pc100_get_arm_clk;
+		get_pclk = s5pc100_get_pclk;
+	}
+}
diff --git a/cpu/arm_cortexa8/s5pc1xx/cpu_info.c b/cpu/arm_cortexa8/s5pc1xx/cpu_info.c
new file mode 100644
index 0000000000..f16c0ff130
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/cpu_info.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+
+/* Default is s5pc100 */
+unsigned int s5pc1xx_cpu_id = 0xC100;
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+	s5pc1xx_cpu_id = readl(S5PC1XX_PRO_ID);
+	s5pc1xx_cpu_id = 0xC000 | ((s5pc1xx_cpu_id & 0x00FFF000) >> 12);
+
+	s5pc1xx_clock_init();
+
+	return 0;
+}
+#endif
+
+u32 get_device_type(void)
+{
+	return s5pc1xx_cpu_id;
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	char buf[32];
+
+	printf("CPU:\tS5P%X@%sMHz\n",
+			s5pc1xx_cpu_id, strmhz(buf, get_arm_clk()));
+
+	return 0;
+}
+#endif
diff --git a/cpu/arm_cortexa8/s5pc1xx/reset.S b/cpu/arm_cortexa8/s5pc1xx/reset.S
new file mode 100644
index 0000000000..7f6ff9c35f
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/reset.S
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2009 Samsung Electronics.
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/cpu.h>
+
+#define S5PC100_SWRESET			0xE0200000
+#define S5PC110_SWRESET			0xE0102000
+
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, =S5PC1XX_PRO_ID
+	ldr	r2, [r1]
+	ldr	r4, =0x00010000
+	and	r4, r2, r4
+	cmp	r4, #0
+	bne	110f
+	/* S5PC100 */
+	ldr	r1, =S5PC100_SWRESET
+	ldr	r2, =0xC100
+	b	200f
+110:	/* S5PC110 */
+	ldr	r1, =S5PC110_SWRESET
+	mov	r2, #1
+200:
+	str	r2, [r1]
+_loop_forever:
+	b	_loop_forever
diff --git a/cpu/arm_cortexa8/s5pc1xx/timer.c b/cpu/arm_cortexa8/s5pc1xx/timer.c
new file mode 100644
index 0000000000..cdba5d9342
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/timer.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Inki Dae <inki.dae@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch/clk.h>
+
+#define PRESCALER_1		(16 - 1)	/* prescaler of timer 2, 3, 4 */
+#define MUX_DIV_2		1		/* 1/2 period */
+#define MUX_DIV_4		2		/* 1/4 period */
+#define MUX_DIV_8		3		/* 1/8 period */
+#define MUX_DIV_16		4		/* 1/16 period */
+#define MUX4_DIV_SHIFT		16
+
+#define TCON_TIMER4_SHIFT	20
+
+static unsigned long count_value;
+
+/* Internal tick units */
+static unsigned long long timestamp;	/* Monotonic incrementing timer */
+static unsigned long lastdec;		/* Last decremneter snapshot */
+
+/* macro to read the 16 bit timer */
+static inline struct s5pc1xx_timer *s5pc1xx_get_base_timer(void)
+{
+	if (cpu_is_s5pc110())
+		return (struct s5pc1xx_timer *)S5PC110_TIMER_BASE;
+	else
+		return (struct s5pc1xx_timer *)S5PC100_TIMER_BASE;
+}
+
+int timer_init(void)
+{
+	struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+	u32 val;
+
+	/*
+	 * @ PWM Timer 4
+	 * Timer Freq(HZ) =
+	 *	PCLK / { (prescaler_value + 1) * (divider_value) }
+	 */
+
+	/* set prescaler : 16 */
+	/* set divider : 2 */
+	writel((PRESCALER_1 & 0xff) << 8, &timer->tcfg0);
+	writel((MUX_DIV_2 & 0xf) << MUX4_DIV_SHIFT, &timer->tcfg1);
+
+	if (count_value == 0) {
+		/* reset initial value */
+		/* count_value = 2085937.5(HZ) (per 1 sec)*/
+		count_value = get_pclk() / ((PRESCALER_1 + 1) *
+				(MUX_DIV_2 + 1));
+
+		/* count_value / 100 = 20859.375(HZ) (per 10 msec) */
+		count_value = count_value / 100;
+	}
+
+	/* set count value */
+	writel(count_value, &timer->tcntb4);
+	lastdec = count_value;
+
+	val = (readl(&timer->tcon) & ~(0x07 << TCON_TIMER4_SHIFT)) |
+		S5PC1XX_TCON4_AUTO_RELOAD;
+
+	/* auto reload & manual update */
+	writel(val | S5PC1XX_TCON4_UPDATE, &timer->tcon);
+
+	/* start PWM timer 4 */
+	writel(val | S5PC1XX_TCON4_START, &timer->tcon);
+
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+unsigned long get_timer(unsigned long base)
+{
+	return get_timer_masked() - base;
+}
+
+void set_timer(unsigned long t)
+{
+	timestamp = t;
+}
+
+/* delay x useconds */
+void udelay(unsigned long usec)
+{
+	unsigned long tmo, tmp;
+
+	if (usec >= 1000) {
+		/*
+		 * if "big" number, spread normalization
+		 * to seconds
+		 * 1. start to normalize for usec to ticks per sec
+		 * 2. find number of "ticks" to wait to achieve target
+		 * 3. finish normalize.
+		 */
+		tmo = usec / 1000;
+		tmo *= (CONFIG_SYS_HZ * count_value / 10);
+		tmo /= 1000;
+	} else {
+		/* else small number, don't kill it prior to HZ multiply */
+		tmo = usec * CONFIG_SYS_HZ * count_value / 10;
+		tmo /= (1000 * 1000);
+	}
+
+	/* get current timestamp */
+	tmp = get_timer(0);
+
+	/* if setting this fordward will roll time stamp */
+	/* reset "advancing" timestamp to 0, set lastdec value */
+	/* else, set advancing stamp wake up time */
+	if ((tmo + tmp + 1) < tmp)
+		reset_timer_masked();
+	else
+		tmo += tmp;
+
+	/* loop till event */
+	while (get_timer_masked() < tmo)
+		;	/* nop */
+}
+
+void reset_timer_masked(void)
+{
+	struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+
+	/* reset time */
+	lastdec = readl(&timer->tcnto4);
+	timestamp = 0;
+}
+
+unsigned long get_timer_masked(void)
+{
+	struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+	unsigned long now = readl(&timer->tcnto4);
+
+	if (lastdec >= now)
+		timestamp += lastdec - now;
+	else
+		timestamp += lastdec + count_value - now;
+
+	lastdec = now;
+
+	return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/doc/README.s5pc1xx b/doc/README.s5pc1xx
new file mode 100644
index 0000000000..5a0fe33db1
--- /dev/null
+++ b/doc/README.s5pc1xx
@@ -0,0 +1,56 @@
+
+Summary
+=======
+
+This README is about U-Boot support for SAMSUNG's ARM Cortex-A8 based S5PC1xx
+family of SoCs (S5PC100 [1] and S5PC110).
+
+Currently the following board is supported:
+
+* SMDKC100 [2]
+
+Toolchain
+=========
+
+While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile
+with -march=armv5 to allow more compilers to work. For U-Boot code this has
+no performance impact.
+
+Build
+=====
+
+* SMDKC100
+
+make smdkc100_config
+make
+
+
+Interfaces
+==========
+
+cpu
+
+To check SoC:
+
+	if (cpu_is_s5pc100())
+		printf("cpu is s5pc100\n");
+
+	or
+
+	if (cpu_is_s5pc110())
+		printf("cpu is s5pc110\n");
+
+gpio
+	not supported yet.
+
+Links
+=====
+
+[1] S5PC100:
+
+http://www.samsung.com/global/business/semiconductor/productInfo.do?
+fmly_id=229&partnum=S5PC100
+
+[2] SMDKC100:
+
+http://meritech.co.kr/eng/products/product_view.php?num=28
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index f0c1aa3406..55c6a12aae 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -32,6 +32,8 @@
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
 #endif
+
+#include <asm/io.h>
 #include <i2c.h>
 
 #ifdef CONFIG_HARD_I2C
@@ -42,142 +44,139 @@
 #define I2C_OK		0
 #define I2C_NOK		1
 #define I2C_NACK	2
-#define I2C_NOK_LA	3		/* Lost arbitration */
-#define I2C_NOK_TOUT	4		/* time out */
-
-#define I2CSTAT_BSY	0x20		/* Busy bit */
-#define I2CSTAT_NACK	0x01		/* Nack bit */
-#define I2CCON_IRPND	0x10		/* Interrupt pending bit */
-#define I2C_MODE_MT	0xC0		/* Master Transmit Mode */
-#define I2C_MODE_MR	0x80		/* Master Receive Mode */
-#define I2C_START_STOP	0x20		/* START / STOP */
-#define I2C_TXRX_ENA	0x10		/* I2C Tx/Rx enable */
+#define I2C_NOK_LA	3	/* Lost arbitration */
+#define I2C_NOK_TOUT	4	/* time out */
 
-#define I2C_TIMEOUT 1			/* 1 second */
+#define I2CSTAT_BSY	0x20	/* Busy bit */
+#define I2CSTAT_NACK	0x01	/* Nack bit */
+#define I2CCON_IRPND	0x10	/* Interrupt pending bit */
+#define I2C_MODE_MT	0xC0	/* Master Transmit Mode */
+#define I2C_MODE_MR	0x80	/* Master Receive Mode */
+#define I2C_START_STOP	0x20	/* START / STOP */
+#define I2C_TXRX_ENA	0x10	/* I2C Tx/Rx enable */
 
+#define I2C_TIMEOUT 1		/* 1 second */
 
 static int GetI2CSDA(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 #ifdef CONFIG_S3C2410
-	return (gpio->GPEDAT & 0x8000) >> 15;
+	return (readl(&gpio->GPEDAT) & 0x8000) >> 15;
 #endif
 #ifdef CONFIG_S3C2400
-	return (gpio->PGDAT & 0x0020) >> 5;
+	return (readl(&gpio->PGDAT) & 0x0020) >> 5;
 #endif
 }
 
 #if 0
 static void SetI2CSDA(int x)
 {
-	rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
+	rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15;
 }
 #endif
 
 static void SetI2CSCL(int x)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 #ifdef CONFIG_S3C2410
-	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+	writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT);
 #endif
 #ifdef CONFIG_S3C2400
-	gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+	writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT);
 #endif
 }
 
-
-static int WaitForXfer (void)
+static int WaitForXfer(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	int i, status;
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i;
 
 	i = I2C_TIMEOUT * 10000;
-	status = i2c->IICCON;
-	while ((i > 0) && !(status & I2CCON_IRPND)) {
-		udelay (100);
-		status = i2c->IICCON;
+	while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) {
+		udelay(100);
 		i--;
 	}
 
-	return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+	return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
 }
 
-static int IsACK (void)
+static int IsACK(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
 
-	return (!(i2c->IICSTAT & I2CSTAT_NACK));
+	return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK);
 }
 
-static void ReadWriteByte (void)
+static void ReadWriteByte(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
 
-	i2c->IICCON &= ~I2CCON_IRPND;
+	writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON);
 }
 
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 	ulong freq, pres = 16, div;
-	int i, status;
+	int i;
 
 	/* wait for some time to give previous transfer a chance to finish */
 
 	i = I2C_TIMEOUT * 1000;
-	status = i2c->IICSTAT;
-	while ((i > 0) && (status & I2CSTAT_BSY)) {
-		udelay (1000);
-		status = i2c->IICSTAT;
+	while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
 		i--;
 	}
 
-	if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
+	if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
 #ifdef CONFIG_S3C2410
-		ulong old_gpecon = gpio->GPECON;
+		ulong old_gpecon = readl(&gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
-		ulong old_gpecon = gpio->PGCON;
+		ulong old_gpecon = readl(&gpio->PGCON);
 #endif
-		/* bus still busy probably by (most) previously interrupted transfer */
+		/* bus still busy probably by (most) previously interrupted
+		   transfer */
 
 #ifdef CONFIG_S3C2410
 		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
-		gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+		writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000,
+		       &gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
 		/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
-		gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
+		writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000,
+		       &gpio->PGCON);
 #endif
 
 		/* toggle I2CSCL until bus idle */
-		SetI2CSCL (0);
-		udelay (1000);
+		SetI2CSCL(0);
+		udelay(1000);
 		i = 10;
-		while ((i > 0) && (GetI2CSDA () != 1)) {
-			SetI2CSCL (1);
-			udelay (1000);
-			SetI2CSCL (0);
-			udelay (1000);
+		while ((i > 0) && (GetI2CSDA() != 1)) {
+			SetI2CSCL(1);
+			udelay(1000);
+			SetI2CSCL(0);
+			udelay(1000);
 			i--;
 		}
-		SetI2CSCL (1);
-		udelay (1000);
+		SetI2CSCL(1);
+		udelay(1000);
 
 		/* restore pin functions */
 #ifdef CONFIG_S3C2410
-		gpio->GPECON = old_gpecon;
+		writel(old_gpecon, &gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
-		gpio->PGCON = old_gpecon;
+		writel(old_gpecon, &gpio->PGCON);
 #endif
 	}
 
 	/* calculate prescaler and divisor values */
-	freq = get_PCLK ();
+	freq = get_PCLK();
 	if ((freq / pres / (16 + 1)) > speed)
 		/* set prescaler to 512 */
 		pres = 512;
@@ -188,13 +187,13 @@ void i2c_init (int speed, int slaveadd)
 
 	/* set prescaler, divisor according to freq, also set
 	 * ACKGEN, IRQ */
-	i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+	writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON);
 
 	/* init to SLAVE REVEIVE and set slaveaddr */
-	i2c->IICSTAT = 0;
-	i2c->IICADD = slaveadd;
+	writel(0, &i2c->IICSTAT);
+	writel(slaveadd, &i2c->IICADD);
 	/* program Master Transmit (and implicit STOP) */
-	i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+	writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
 
 }
 
@@ -206,107 +205,109 @@ void i2c_init (int speed, int slaveadd)
  * 0 we skip the address write cycle.
  */
 static
-int i2c_transfer (unsigned char cmd_type,
-		  unsigned char chip,
-		  unsigned char addr[],
-		  unsigned char addr_len,
-		  unsigned char data[], unsigned short data_len)
+int i2c_transfer(unsigned char cmd_type,
+		 unsigned char chip,
+		 unsigned char addr[],
+		 unsigned char addr_len,
+		 unsigned char data[], unsigned short data_len)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	int i, status, result;
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i, result;
 
 	if (data == 0 || data_len == 0) {
 		/*Don't support data transfer of no length or to address 0 */
-		printf ("i2c_transfer: bad call\n");
+		printf("i2c_transfer: bad call\n");
 		return I2C_NOK;
 	}
 
 	/* Check I2C bus idle */
 	i = I2C_TIMEOUT * 1000;
-	status = i2c->IICSTAT;
-	while ((i > 0) && (status & I2CSTAT_BSY)) {
-		udelay (1000);
-		status = i2c->IICSTAT;
+	while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
 		i--;
 	}
 
-	if (status & I2CSTAT_BSY)
+	if (readl(&i2c->IICSTAT) & I2CSTAT_BSY)
 		return I2C_NOK_TOUT;
 
-	i2c->IICCON |= 0x80;
+	writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON);
 	result = I2C_OK;
 
 	switch (cmd_type) {
 	case I2C_WRITE:
 		if (addr && addr_len) {
-			i2c->IICDS = chip;
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
 			i = 0;
 			while ((i < addr_len) && (result == I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = addr[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(addr[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 			i = 0;
 			while ((i < data_len) && (result == I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = data[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 		} else {
-			i2c->IICDS = chip;
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
 			i = 0;
 			while ((i < data_len) && (result = I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = data[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 		}
 
 		if (result == I2C_OK)
-			result = WaitForXfer ();
+			result = WaitForXfer();
 
 		/* send STOP */
-		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-		ReadWriteByte ();
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
 		break;
 
 	case I2C_READ:
 		if (addr && addr_len) {
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
-			i2c->IICDS = chip;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT |= I2C_START_STOP;
-			result = WaitForXfer ();
-			if (IsACK ()) {
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
+			if (IsACK()) {
 				i = 0;
 				while ((i < addr_len) && (result == I2C_OK)) {
-					i2c->IICDS = addr[i];
-					ReadWriteByte ();
-					result = WaitForXfer ();
+					writel(addr[i], &i2c->IICDS);
+					ReadWriteByte();
+					result = WaitForXfer();
 					i++;
 				}
 
-				i2c->IICDS = chip;
+				writel(chip, &i2c->IICDS);
 				/* resend START */
-				i2c->IICSTAT =  I2C_MODE_MR | I2C_TXRX_ENA |
-						I2C_START_STOP;
-				ReadWriteByte ();
-				result = WaitForXfer ();
+				writel(I2C_MODE_MR | I2C_TXRX_ENA |
+				       I2C_START_STOP, &i2c->IICSTAT);
+				ReadWriteByte();
+				result = WaitForXfer();
 				i = 0;
 				while ((i < data_len) && (result == I2C_OK)) {
 					/* disable ACK for final READ */
 					if (i == data_len - 1)
-						i2c->IICCON &= ~0x80;
-					ReadWriteByte ();
-					result = WaitForXfer ();
-					data[i] = i2c->IICDS;
+						writel(readl(&i2c->IICCON)
+						       & ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
 					i++;
 				}
 			} else {
@@ -314,21 +315,23 @@ int i2c_transfer (unsigned char cmd_type,
 			}
 
 		} else {
-			i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-			i2c->IICDS = chip;
+			writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT |= I2C_START_STOP;
-			result = WaitForXfer ();
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
 
-			if (IsACK ()) {
+			if (IsACK()) {
 				i = 0;
 				while ((i < data_len) && (result == I2C_OK)) {
 					/* disable ACK for final READ */
 					if (i == data_len - 1)
-						i2c->IICCON &= ~0x80;
-					ReadWriteByte ();
-					result = WaitForXfer ();
-					data[i] = i2c->IICDS;
+						writel(readl(&i2c->IICCON) &
+						       ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
 					i++;
 				}
 			} else {
@@ -337,12 +340,12 @@ int i2c_transfer (unsigned char cmd_type,
 		}
 
 		/* send STOP */
-		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-		ReadWriteByte ();
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
 		break;
 
 	default:
-		printf ("i2c_transfer: bad call\n");
+		printf("i2c_transfer: bad call\n");
 		result = I2C_NOK;
 		break;
 	}
@@ -350,7 +353,7 @@ int i2c_transfer (unsigned char cmd_type,
 	return (result);
 }
 
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
 {
 	uchar buf[1];
 
@@ -361,16 +364,16 @@ int i2c_probe (uchar chip)
 	 * address was <ACK>ed (i.e. there was a chip at that address which
 	 * drove the data line low).
 	 */
-	return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+	return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
 }
 
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	uchar xaddr[4];
 	int ret;
 
 	if (alen > 4) {
-		printf ("I2C read: addr len %d not supported\n", alen);
+		printf("I2C read: addr len %d not supported\n", alen);
 		return 1;
 	}
 
@@ -394,23 +397,24 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if ((ret =
-	     i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
-			   buffer, len)) != 0) {
-		printf ("I2c read: failed %d\n", ret);
+	     i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+			  buffer, len)) != 0) {
+		printf("I2c read: failed %d\n", ret);
 		return 1;
 	}
 	return 0;
 }
 
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	uchar xaddr[4];
 
 	if (alen > 4) {
-		printf ("I2C write: addr len %d not supported\n", alen);
+		printf("I2C write: addr len %d not supported\n", alen);
 		return 1;
 	}
 
@@ -433,10 +437,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	return (i2c_transfer
 		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
 		 len) != 0);
 }
-#endif	/* CONFIG_HARD_I2C */
+#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index d27a625471..f2f3e722e5 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -20,29 +20,10 @@
 
 #include <common.h>
 
-#if 0
-#define DEBUGN	printf
-#else
-#define DEBUGN(x, args ...) {}
-#endif
-
 #include <nand.h>
 #include <s3c2410.h>
 #include <asm/io.h>
 
-#define __REGb(x)	(*(volatile unsigned char *)(x))
-#define __REGi(x)	(*(volatile unsigned int *)(x))
-
-#define	NF_BASE		0x4e000000
-#define	NFCONF		__REGi(NF_BASE + 0x0)
-#define	NFCMD		__REGb(NF_BASE + 0x4)
-#define	NFADDR		__REGb(NF_BASE + 0x8)
-#define	NFDATA		__REGb(NF_BASE + 0xc)
-#define	NFSTAT		__REGb(NF_BASE + 0x10)
-#define NFECC0		__REGb(NF_BASE + 0x14)
-#define NFECC1		__REGb(NF_BASE + 0x15)
-#define NFECC2		__REGb(NF_BASE + 0x16)
-
 #define S3C2410_NFCONF_EN          (1<<15)
 #define S3C2410_NFCONF_512BYTE     (1<<14)
 #define S3C2410_NFCONF_4STEP       (1<<13)
@@ -58,11 +39,12 @@
 static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
 
-	DEBUGN("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
+	debugX(1, "hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		ulong IO_ADDR_W = NF_BASE;
+		ulong IO_ADDR_W = (ulong)nand;
 
 		if (!(ctrl & NAND_CLE))
 			IO_ADDR_W |= S3C2410_ADDR_NCLE;
@@ -72,9 +54,11 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 		chip->IO_ADDR_W = (void *)IO_ADDR_W;
 
 		if (ctrl & NAND_NCE)
-			NFCONF &= ~S3C2410_NFCONF_nFCE;
+			writel(readl(&nand->NFCONF) & ~S3C2410_NFCONF_nFCE,
+			       &nand->NFCONF);
 		else
-			NFCONF |= S3C2410_NFCONF_nFCE;
+			writel(readl(&nand->NFCONF) | S3C2410_NFCONF_nFCE,
+			       &nand->NFCONF);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -83,15 +67,17 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 static int s3c2410_dev_ready(struct mtd_info *mtd)
 {
-	DEBUGN("dev_ready\n");
-	return (NFSTAT & 0x01);
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
+	debugX(1, "dev_ready\n");
+	return readl(&nand->NFSTAT) & 0x01;
 }
 
 #ifdef CONFIG_S3C2410_NAND_HWECC
 void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
-	DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
-	NFCONF |= S3C2410_NFCONF_INITECC;
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
+	debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
+	writel(readl(&nand->NFCONF) | S3C2410_NFCONF_INITECC, &nand->NFCONF);
 }
 
 static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
@@ -100,8 +86,8 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	ecc_code[0] = NFECC0;
 	ecc_code[1] = NFECC1;
 	ecc_code[2] = NFECC2;
-	DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
-		mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+	debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+	       mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
 
 	return 0;
 }
@@ -123,24 +109,26 @@ int board_nand_init(struct nand_chip *nand)
 {
 	u_int32_t cfg;
 	u_int8_t tacls, twrph0, twrph1;
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
 
-	DEBUGN("board_nand_init()\n");
+	debugX(1, "board_nand_init()\n");
 
-	clk_power->CLKCON |= (1 << 4);
+	writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
 
 	/* initialize hardware */
-	twrph0 = 3; twrph1 = 0; tacls = 0;
+	twrph0 = 3;
+	twrph1 = 0;
+	tacls = 0;
 
 	cfg = S3C2410_NFCONF_EN;
 	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
 	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
 	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-
-	NFCONF = cfg;
+	writel(cfg, &nand_reg->NFCONF);
 
 	/* initialize nand_chip data structure */
-	nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)0x4e00000c;
+	nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA;
 
 	/* read_buf and write_buf are default */
 	/* read_byte and write_byte are default */
@@ -165,7 +153,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->options = 0;
 #endif
 
-	DEBUGN("end of nand_init\n");
+	debugX(1, "end of nand_init\n");
 
 	return 0;
 }
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 1d35a57d84..2571df0163 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libonenand.a
 
 COBJS-$(CONFIG_CMD_ONENAND)	:= onenand_uboot.o onenand_base.o onenand_bbt.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND)	+= samsung.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
new file mode 100644
index 0000000000..f2be687639
--- /dev/null
+++ b/drivers/mtd/onenand/samsung.c
@@ -0,0 +1,636 @@
+/*
+ * S3C64XX/S5PC100 OneNAND driver at U-Boot
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Implementation:
+ *	Emulate the pseudo BufferRAM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#ifdef ONENAND_DEBUG
+#define DPRINTK(format, args...)					\
+do {									\
+	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
+} while (0)
+#else
+#define DPRINTK(...)			do { } while (0)
+#endif
+
+#define ONENAND_ERASE_STATUS		0x00
+#define ONENAND_MULTI_ERASE_SET		0x01
+#define ONENAND_ERASE_START		0x03
+#define ONENAND_UNLOCK_START		0x08
+#define ONENAND_UNLOCK_END		0x09
+#define ONENAND_LOCK_START		0x0A
+#define ONENAND_LOCK_END		0x0B
+#define ONENAND_LOCK_TIGHT_START	0x0C
+#define ONENAND_LOCK_TIGHT_END		0x0D
+#define ONENAND_UNLOCK_ALL		0x0E
+#define ONENAND_OTP_ACCESS		0x12
+#define ONENAND_SPARE_ACCESS_ONLY	0x13
+#define ONENAND_MAIN_ACCESS_ONLY	0x14
+#define ONENAND_ERASE_VERIFY		0x15
+#define ONENAND_MAIN_SPARE_ACCESS	0x16
+#define ONENAND_PIPELINE_READ		0x4000
+
+#if defined(CONFIG_S3C64XX)
+#define MAP_00				(0x0 << 24)
+#define MAP_01				(0x1 << 24)
+#define MAP_10				(0x2 << 24)
+#define MAP_11				(0x3 << 24)
+#elif defined(CONFIG_S5PC1XX)
+#define MAP_00				(0x0 << 26)
+#define MAP_01				(0x1 << 26)
+#define MAP_10				(0x2 << 26)
+#define MAP_11				(0x3 << 26)
+#endif
+
+/* read/write of XIP buffer */
+#define CMD_MAP_00(mem_addr)		(MAP_00 | ((mem_addr) << 1))
+/* read/write to the memory device */
+#define CMD_MAP_01(mem_addr)		(MAP_01 | (mem_addr))
+/* control special functions of the memory device */
+#define CMD_MAP_10(mem_addr)		(MAP_10 | (mem_addr))
+/* direct interface(direct access) with the memory device */
+#define CMD_MAP_11(mem_addr)		(MAP_11 | ((mem_addr) << 2))
+
+struct s3c_onenand {
+	struct mtd_info	*mtd;
+	void __iomem	*base;
+	void __iomem	*ahb_addr;
+	int		bootram_command;
+	void __iomem	*page_buf;
+	void __iomem	*oob_buf;
+	unsigned int	(*mem_addr)(int fba, int fpa, int fsa);
+	struct samsung_onenand *reg;
+};
+
+static struct s3c_onenand *onenand;
+
+static int s3c_read_cmd(unsigned int cmd)
+{
+	return readl(onenand->ahb_addr + cmd);
+}
+
+static void s3c_write_cmd(int value, unsigned int cmd)
+{
+	writel(value, onenand->ahb_addr + cmd);
+}
+
+/*
+ * MEM_ADDR
+ *
+ * fba: flash block address
+ * fpa: flash page address
+ * fsa: flash sector address
+ *
+ * return the buffer address on the memory device
+ * It will be combined with CMD_MAP_XX
+ */
+#if defined(CONFIG_S3C64XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+	return (fba << 12) | (fpa << 6) | (fsa << 4);
+}
+#elif defined(CONFIG_S5PC1XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+	return (fba << 13) | (fpa << 7) | (fsa << 5);
+}
+#endif
+
+static void s3c_onenand_reset(void)
+{
+	unsigned long timeout = 0x10000;
+	int stat;
+
+	writel(ONENAND_MEM_RESET_COLD, &onenand->reg->mem_reset);
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & RST_CMP)
+			break;
+	}
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/* Clear interrupt */
+	writel(0x0, &onenand->reg->int_err_ack);
+	/* Clear the ECC status */
+	writel(0x0, &onenand->reg->ecc_err_stat);
+}
+
+static unsigned short s3c_onenand_readw(void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+	int value;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_MANUFACTURER_ID:
+		return readl(&onenand->reg->manufact_id);
+	case ONENAND_REG_DEVICE_ID:
+		return readl(&onenand->reg->device_id);
+	case ONENAND_REG_VERSION_ID:
+		return readl(&onenand->reg->flash_ver_id);
+	case ONENAND_REG_DATA_BUFFER_SIZE:
+		return readl(&onenand->reg->data_buf_size);
+	case ONENAND_REG_TECHNOLOGY:
+		return readl(&onenand->reg->tech);
+	case ONENAND_REG_SYS_CFG1:
+		return readl(&onenand->reg->mem_cfg);
+
+	/* Used at unlock all status */
+	case ONENAND_REG_CTRL_STATUS:
+		return 0;
+
+	case ONENAND_REG_WP_STATUS:
+		return ONENAND_WP_US;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM && onenand->bootram_command) {
+		if (word_addr == 0)
+			return readl(&onenand->reg->manufact_id);
+		if (word_addr == 1)
+			return readl(&onenand->reg->device_id);
+		if (word_addr == 2)
+			return readl(&onenand->reg->flash_ver_id);
+	}
+
+	value = s3c_read_cmd(CMD_MAP_11(word_addr)) & 0xffff;
+	printk(KERN_INFO "s3c_onenand_readw:  Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+	return value;
+}
+
+static void s3c_onenand_writew(unsigned short value, void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_SYS_CFG1:
+		writel(value, &onenand->reg->mem_cfg);
+		return;
+
+	case ONENAND_REG_START_ADDRESS1:
+	case ONENAND_REG_START_ADDRESS2:
+		return;
+
+	/* Lock/lock-tight/unlock/unlock_all */
+	case ONENAND_REG_START_BLOCK_ADDRESS:
+		return;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM) {
+		if (value == ONENAND_CMD_READID) {
+			onenand->bootram_command = 1;
+			return;
+		}
+		if (value == ONENAND_CMD_RESET) {
+			writel(ONENAND_MEM_RESET_COLD,
+					&onenand->reg->mem_reset);
+			onenand->bootram_command = 0;
+			return;
+		}
+	}
+
+	printk(KERN_INFO "s3c_onenand_writew: Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+
+	s3c_write_cmd(value, CMD_MAP_11(word_addr));
+}
+
+static int s3c_onenand_wait(struct mtd_info *mtd, int state)
+{
+	unsigned int flags = INT_ACT;
+	unsigned int stat, ecc;
+	unsigned long timeout = 0x100000;
+
+	switch (state) {
+	case FL_READING:
+		flags |= BLK_RW_CMP | LOAD_CMP;
+		break;
+	case FL_WRITING:
+		flags |= BLK_RW_CMP | PGM_CMP;
+		break;
+	case FL_ERASING:
+		flags |= BLK_RW_CMP | ERS_CMP;
+		break;
+	case FL_LOCKING:
+		flags |= BLK_RW_CMP;
+		break;
+	default:
+		break;
+	}
+
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
+	if (stat & LOAD_CMP) {
+		ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			printk(KERN_INFO "%s: ECC error = 0x%04x\n",
+					__func__, ecc);
+			mtd->ecc_stats.failed++;
+			return -EBADMSG;
+		}
+	}
+
+	if (stat & (LOCKED_BLK | ERS_FAIL | PGM_FAIL | LD_FAIL_ECC_ERR)) {
+		printk(KERN_INFO "%s: controller error = 0x%04x\n",
+				__func__, stat);
+		if (stat & LOCKED_BLK)
+			printk(KERN_INFO "%s: it's locked error = 0x%04x\n",
+					__func__, stat);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int s3c_onenand_command(struct mtd_info *mtd, int cmd,
+		loff_t addr, size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int *m, *s;
+	int fba, fpa, fsa = 0;
+	unsigned int mem_addr;
+	int i, mcount, scount;
+	int index;
+
+	fba = (int) (addr >> this->erase_shift);
+	fpa = (int) (addr >> this->page_shift);
+	fpa &= this->page_mask;
+
+	mem_addr = onenand->mem_addr(fba, fpa, fsa);
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+	case ONENAND_CMD_READOOB:
+	case ONENAND_CMD_BUFFERRAM:
+		ONENAND_SET_NEXT_BUFFERRAM(this);
+	default:
+		break;
+	}
+
+	index = ONENAND_CURRENT_BUFFERRAM(this);
+
+	/*
+	 * Emulate Two BufferRAMs and access with 4 bytes pointer
+	 */
+	m = (unsigned int *) onenand->page_buf;
+	s = (unsigned int *) onenand->oob_buf;
+
+	if (index) {
+		m += (this->writesize >> 2);
+		s += (mtd->oobsize >> 2);
+	}
+
+	mcount = mtd->writesize >> 2;
+	scount = mtd->oobsize >> 2;
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_READOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			*s++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_PROG:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(*m++, CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_PROGOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+
+		/* Main - dummy write */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(0xffffffff, CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			s3c_write_cmd(*s++, CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_UNLOCK_ALL:
+		s3c_write_cmd(ONENAND_UNLOCK_ALL, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE:
+		s3c_write_cmd(ONENAND_ERASE_START, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_MULTIBLOCK_ERASE:
+		s3c_write_cmd(ONENAND_MULTI_ERASE_SET, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE_VERIFY:
+		s3c_write_cmd(ONENAND_ERASE_VERIFY, CMD_MAP_10(mem_addr));
+		return 0;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static unsigned char *s3c_get_bufferram(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+	int index = ONENAND_CURRENT_BUFFERRAM(this);
+	unsigned char *p;
+
+	if (area == ONENAND_DATARAM) {
+		p = (unsigned char *) onenand->page_buf;
+		if (index == 1)
+			p += this->writesize;
+	} else {
+		p = (unsigned char *) onenand->oob_buf;
+		if (index == 1)
+			p += mtd->oobsize;
+	}
+
+	return p;
+}
+
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				  unsigned char *buffer, int offset,
+				  size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(buffer, p + offset, count);
+	return 0;
+}
+
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				   const unsigned char *buffer, int offset,
+				   size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(p + offset, buffer, count);
+	return 0;
+}
+
+static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+	struct samsung_onenand *reg = (struct samsung_onenand *)onenand->base;
+	unsigned int flags = INT_ACT | LOAD_CMP;
+	unsigned int stat;
+	unsigned long timeout = 0x10000;
+
+	while (timeout--) {
+		stat = readl(&reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	if (stat & LD_FAIL_ECC_ERR) {
+		s3c_onenand_reset();
+		return ONENAND_BBT_READ_ERROR;
+	}
+
+	if (stat & LOAD_CMP) {
+		int ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			s3c_onenand_reset();
+			return ONENAND_BBT_READ_ERROR;
+		}
+	}
+
+	return 0;
+}
+
+static void s3c_onenand_check_lock_status(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int block, end;
+	int tmp;
+
+	end = this->chipsize >> this->erase_shift;
+
+	for (block = 0; block < end; block++) {
+		tmp = s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
+
+		if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) {
+			printf("block %d is write-protected!\n", block);
+			writel(LOCKED_BLK, &onenand->reg->int_err_ack);
+		}
+	}
+}
+
+static void s3c_onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs,
+		size_t len, int cmd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int start, end, start_mem_addr, end_mem_addr;
+
+	start = ofs >> this->erase_shift;
+	start_mem_addr = onenand->mem_addr(start, 0, 0);
+	end = start + (len >> this->erase_shift) - 1;
+	end_mem_addr = onenand->mem_addr(end, 0, 0);
+
+	if (cmd == ONENAND_CMD_LOCK) {
+		s3c_write_cmd(ONENAND_LOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_LOCK_END, CMD_MAP_10(end_mem_addr));
+	} else {
+		s3c_write_cmd(ONENAND_UNLOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_UNLOCK_END, CMD_MAP_10(end_mem_addr));
+	}
+
+	this->wait(mtd, FL_LOCKING);
+}
+
+static void s3c_onenand_unlock_all(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t ofs = 0;
+	size_t len = this->chipsize;
+
+	/* FIXME workaround */
+	this->subpagesize = mtd->writesize;
+	mtd->subpage_sft = 0;
+
+	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+		/* Write unlock command */
+		this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+		/* No need to check return value */
+		this->wait(mtd, FL_LOCKING);
+
+		/* Workaround for all block unlock in DDP */
+		if (!ONENAND_IS_DDP(this)) {
+			s3c_onenand_check_lock_status(mtd);
+			return;
+		}
+
+		/* All blocks on another chip */
+		ofs = this->chipsize >> 1;
+		len = this->chipsize >> 1;
+	}
+
+	s3c_onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+	s3c_onenand_check_lock_status(mtd);
+}
+
+#ifdef CONFIG_S3C64XX
+static void s3c_set_width_regs(struct onenand_chip *this)
+{
+	int dev_id, density;
+	int fba, fpa, fsa;
+	int dbs_dfs;
+
+	dev_id = DEVICE_ID0_REG;
+
+	density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf;
+	dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP);
+
+	fba = density + 7;
+	if (dbs_dfs)
+		fba--;		/* Decrease the fba */
+	fpa = 6;
+	if (density >= ONENAND_DEVICE_DENSITY_512Mb)
+		fsa = 2;
+	else
+		fsa = 1;
+
+	DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu",
+		FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG,
+		DDP_DEVICE_REG);
+
+	DPRINTK("mem_cfg0 0x%lx, sync mode %lu, "
+		"dev_page_size %lu, BURST LEN %lu",
+		MEM_CFG0_REG, SYNC_MODE_REG,
+		DEV_PAGE_SIZE_REG, BURST_LEN0_REG);
+
+	DEV_PAGE_SIZE_REG = 0x1;
+
+	FBA_WIDTH0_REG = fba;
+	FPA_WIDTH0_REG = fpa;
+	FSA_WIDTH0_REG = fsa;
+	DBS_DFS_WIDTH0_REG = dbs_dfs;
+}
+#endif
+
+void s3c_onenand_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	u32 size = (4 << 10);	/* 4 KiB */
+
+	onenand = malloc(sizeof(struct s3c_onenand));
+	if (!onenand)
+		return;
+
+	onenand->page_buf = malloc(size * sizeof(char));
+	if (!onenand->page_buf)
+		return;
+	memset(onenand->page_buf, 0xff, size);
+
+	onenand->oob_buf = malloc(128 * sizeof(char));
+	if (!onenand->oob_buf)
+		return;
+	memset(onenand->oob_buf, 0xff, 128);
+
+	onenand->mtd = mtd;
+
+#if defined(CONFIG_S3C64XX)
+	onenand->base = (void *)0x70100000;
+	onenand->ahb_addr = (void *)0x20000000;
+#elif defined(CONFIG_S5PC1XX)
+	onenand->base = (void *)0xE7100000;
+	onenand->ahb_addr = (void *)0xB0000000;
+#endif
+	onenand->mem_addr = s3c_mem_addr;
+	onenand->reg = (struct samsung_onenand *)onenand->base;
+
+	this->read_word = s3c_onenand_readw;
+	this->write_word = s3c_onenand_writew;
+
+	this->wait = s3c_onenand_wait;
+	this->bbt_wait = s3c_onenand_bbt_wait;
+	this->unlock_all = s3c_onenand_unlock_all;
+	this->command = s3c_onenand_command;
+
+	this->read_bufferram = onenand_read_bufferram;
+	this->write_bufferram = onenand_write_bufferram;
+
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b106ec9732..df7347897b 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -249,6 +249,12 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 
 	dev->iobase = base_addr;
 
+	/* Try to detect chip. Will fail if not present. */
+	if (smc911x_detect_chip(dev)) {
+		free(dev);
+		return 0;
+	}
+
 	addrh = smc911x_get_mac_csr(dev, ADDRH);
 	addrl = smc911x_get_mac_csr(dev, ADDRL);
 	dev->enetaddr[0] = addrl;
@@ -264,12 +270,6 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 	dev->recv = smc911x_rx;
 	sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
 
-	/* Try to detect chip. Will fail if not present. */
-	if (smc911x_detect_chip(dev)) {
-		free(dev);
-		return 0;
-	}
-
 	eth_register(dev);
 	return 0;
 }
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index e10db9acb8..1ce34e38df 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -37,6 +37,7 @@
 #endif
 
 #include <rtc.h>
+#include <asm/io.h>
 
 /*#define	DEBUG*/
 
@@ -48,112 +49,113 @@ typedef enum {
 
 static inline void SetRTC_Access(RTC_ACCESS a)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
+
 	switch (a) {
-		case RTC_ENABLE:
-			rtc->RTCCON |= 0x01; break;
+	case RTC_ENABLE:
+		writeb(readb(&rtc->RTCCON) | 0x01, &rtc->RTCCON);
+		break;
 
-		case RTC_DISABLE:
-			rtc->RTCCON &= ~0x01; break;
+	case RTC_DISABLE:
+		writeb(readb(&rtc->RTCCON) & ~0x01, &rtc->RTCCON);
+		break;
 	}
 }
 
 /* ------------------------------------------------------------------------- */
 
-int rtc_get (struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 	uchar sec, min, hour, mday, wday, mon, year;
-	uchar a_sec,a_min, a_hour, a_date, a_mon, a_year, a_armed;
+	uchar a_sec, a_min, a_hour, a_date, a_mon, a_year, a_armed;
 
 	/* enable access to RTC registers */
 	SetRTC_Access(RTC_ENABLE);
 
 	/* read RTC registers */
 	do {
-		sec	= rtc->BCDSEC;
-		min	= rtc->BCDMIN;
-		hour	= rtc->BCDHOUR;
-		mday	= rtc->BCDDATE;
-		wday	= rtc->BCDDAY;
-		mon	= rtc->BCDMON;
-		year	= rtc->BCDYEAR;
-	} while (sec != rtc->BCDSEC);
+		sec  = readb(&rtc->BCDSEC);
+		min  = readb(&rtc->BCDMIN);
+		hour = readb(&rtc->BCDHOUR);
+		mday = readb(&rtc->BCDDATE);
+		wday = readb(&rtc->BCDDAY);
+		mon  = readb(&rtc->BCDMON);
+		year = readb(&rtc->BCDYEAR);
+	} while (sec != readb(&rtc->BCDSEC));
 
 	/* read ALARM registers */
-	a_sec	= rtc->ALMSEC;
-	a_min	= rtc->ALMMIN;
-	a_hour	= rtc->ALMHOUR;
-	a_date	= rtc->ALMDATE;
-	a_mon	= rtc->ALMMON;
-	a_year	= rtc->ALMYEAR;
-	a_armed	= rtc->RTCALM;
+	a_sec   = readb(&rtc->ALMSEC);
+	a_min   = readb(&rtc->ALMMIN);
+	a_hour  = readb(&rtc->ALMHOUR);
+	a_date  = readb(&rtc->ALMDATE);
+	a_mon   = readb(&rtc->ALMMON);
+	a_year  = readb(&rtc->ALMYEAR);
+	a_armed = readb(&rtc->RTCALM);
 
 	/* disable access to RTC registers */
 	SetRTC_Access(RTC_DISABLE);
 
 #ifdef RTC_DEBUG
-	printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
-		"hr: %02x min: %02x sec: %02x\n",
-		year, mon, mday, wday,
-		hour, min, sec);
-	printf ( "Alarms: %02x: year: %02x month: %02x date: %02x hour: %02x min: %02x sec: %02x\n",
-		a_armed,
-		a_year, a_mon, a_date,
-		a_hour, a_min, a_sec);
+	printf("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+	       "hr: %02x min: %02x sec: %02x\n",
+	       year, mon, mday, wday, hour, min, sec);
+	printf("Alarms: %02x: year: %02x month: %02x date: %02x hour: "
+	       "%02x min: %02x sec: %02x\n",
+	       a_armed, a_year, a_mon, a_date, a_hour, a_min, a_sec);
 #endif
 
-	tmp->tm_sec  = bcd2bin(sec  & 0x7F);
-	tmp->tm_min  = bcd2bin(min  & 0x7F);
+	tmp->tm_sec  = bcd2bin(sec & 0x7F);
+	tmp->tm_min  = bcd2bin(min & 0x7F);
 	tmp->tm_hour = bcd2bin(hour & 0x3F);
 	tmp->tm_mday = bcd2bin(mday & 0x3F);
 	tmp->tm_mon  = bcd2bin(mon & 0x1F);
 	tmp->tm_year = bcd2bin(year);
 	tmp->tm_wday = bcd2bin(wday & 0x07);
-	if(tmp->tm_year<70)
-		tmp->tm_year+=2000;
+	if (tmp->tm_year < 70)
+		tmp->tm_year += 2000;
 	else
-		tmp->tm_year+=1900;
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
+		tmp->tm_year += 1900;
+	tmp->tm_yday  = 0;
+	tmp->tm_isdst = 0;
 #ifdef RTC_DEBUG
-	printf ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	printf("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
 
 	return 0;
 }
 
-int rtc_set (struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 	uchar sec, min, hour, mday, wday, mon, year;
 
 #ifdef RTC_DEBUG
-	printf ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	printf("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
-	year	= bin2bcd(tmp->tm_year % 100);
-	mon	= bin2bcd(tmp->tm_mon);
-	wday	= bin2bcd(tmp->tm_wday);
-	mday	= bin2bcd(tmp->tm_mday);
-	hour	= bin2bcd(tmp->tm_hour);
-	min	= bin2bcd(tmp->tm_min);
-	sec	= bin2bcd(tmp->tm_sec);
+	year = bin2bcd(tmp->tm_year % 100);
+	mon  = bin2bcd(tmp->tm_mon);
+	wday = bin2bcd(tmp->tm_wday);
+	mday = bin2bcd(tmp->tm_mday);
+	hour = bin2bcd(tmp->tm_hour);
+	min  = bin2bcd(tmp->tm_min);
+	sec  = bin2bcd(tmp->tm_sec);
 
 	/* enable access to RTC registers */
 	SetRTC_Access(RTC_ENABLE);
 
 	/* write RTC registers */
-	rtc->BCDSEC	= sec;
-	rtc->BCDMIN	= min;
-	rtc->BCDHOUR	= hour;
-	rtc->BCDDATE	= mday;
-	rtc->BCDDAY	= wday;
-	rtc->BCDMON	= mon;
-	rtc->BCDYEAR	= year;
+	writeb(sec, &rtc->BCDSEC);
+	writeb(min, &rtc->BCDMIN);
+	writeb(hour, &rtc->BCDHOUR);
+	writeb(mday, &rtc->BCDDATE);
+	writeb(wday, &rtc->BCDDAY);
+	writeb(mon, &rtc->BCDMON);
+	writeb(year, &rtc->BCDYEAR);
 
 	/* disable access to RTC registers */
 	SetRTC_Access(RTC_DISABLE);
@@ -161,12 +163,12 @@ int rtc_set (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_reset (void)
+void rtc_reset(void)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 
-	rtc->RTCCON = (rtc->RTCCON & ~0x06) | 0x08;
-	rtc->RTCCON &= ~(0x08|0x01);
+	writeb((readb(&rtc->RTCCON) & ~0x06) | 0x08, &rtc->RTCCON);
+	writeb(readb(&rtc->RTCCON) & ~(0x08 | 0x01), &rtc->RTCCON);
 }
 
 #endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 64882a2e8e..3c77a7c6c0 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
 COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
 COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
+COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
 COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
 COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
 COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 6d69c43ed5..c2c72e456f 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #elif defined(CONFIG_SERIAL3)
 # if defined(CONFIG_TRAB)
-#  #error "TRAB supports only CONFIG_SERIAL1"
+#  error "TRAB supports only CONFIG_SERIAL1"
 # endif
 #define UART_NR	S3C24X0_UART2
 
@@ -46,51 +46,71 @@ DECLARE_GLOBAL_DATA_PTR;
 #error "Bad: you didn't configure serial ..."
 #endif
 
+#include <asm/io.h>
+
 #if defined(CONFIG_SERIAL_MULTI)
 #include <serial.h>
 
 /* Multi serial device functions */
 #define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
-    int  s3serial##port##_init (void) {\
-	return serial_init_dev(port);}\
-    void s3serial##port##_setbrg (void) {\
-	serial_setbrg_dev(port);}\
-    int  s3serial##port##_getc (void) {\
-	return serial_getc_dev(port);}\
-    int  s3serial##port##_tstc (void) {\
-	return serial_tstc_dev(port);}\
-    void s3serial##port##_putc (const char c) {\
-	serial_putc_dev(port, c);}\
-    void s3serial##port##_puts (const char *s) {\
-	serial_puts_dev(port, s);}
-
-#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
-	name,\
-	bus,\
-	s3serial##port##_init,\
-	s3serial##port##_setbrg,\
-	s3serial##port##_getc,\
-	s3serial##port##_tstc,\
-	s3serial##port##_putc,\
-	s3serial##port##_puts, }
+	int s3serial##port##_init(void) \
+	{ \
+		return serial_init_dev(port); \
+	} \
+	void s3serial##port##_setbrg(void) \
+	{ \
+		serial_setbrg_dev(port); \
+	} \
+	int s3serial##port##_getc(void) \
+	{ \
+		return serial_getc_dev(port); \
+	} \
+	int s3serial##port##_tstc(void) \
+	{ \
+		return serial_tstc_dev(port); \
+	} \
+	void s3serial##port##_putc(const char c) \
+	{ \
+		serial_putc_dev(port, c); \
+	} \
+	void s3serial##port##_puts(const char *s) \
+	{ \
+		serial_puts_dev(port, s); \
+	}
+
+#define INIT_S3C_SERIAL_STRUCTURE(port, name, bus) { \
+	name, \
+	bus, \
+	s3serial##port##_init, \
+	s3serial##port##_setbrg, \
+	s3serial##port##_getc, \
+	s3serial##port##_tstc, \
+	s3serial##port##_putc, \
+	s3serial##port##_puts, \
+}
 
 #endif /* CONFIG_SERIAL_MULTI */
 
+#ifdef CONFIG_HWFLOW
+static int hwflow;
+#endif
+
 void _serial_setbrg(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 	unsigned int reg = 0;
 	int i;
 
 	/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
 	reg = get_PCLK() / (16 * gd->baudrate) - 1;
 
-	uart->UBRDIV = reg;
-	for (i = 0; i < 100; i++);
+	writel(reg, &uart->UBRDIV);
+	for (i = 0; i < 100; i++)
+		/* Delay */ ;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_setbrg_dev(unsigned int dev_index)
+static inline void serial_setbrg_dev(unsigned int dev_index)
 {
 	_serial_setbrg(dev_index);
 }
@@ -107,29 +127,33 @@ void serial_setbrg(void)
  */
 static int serial_init_dev(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
+
+#ifdef CONFIG_HWFLOW
+	hwflow = 0;	/* turned off by default */
+#endif
 
 	/* FIFO enable, Tx/Rx FIFO clear */
-	uart->UFCON = 0x07;
-	uart->UMCON = 0x0;
+	writel(0x07, &uart->UFCON);
+	writel(0x0, &uart->UMCON);
 
 	/* Normal,No parity,1 stop,8 bit */
-	uart->ULCON = 0x3;
+	writel(0x3, &uart->ULCON);
 	/*
 	 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
 	 * normal,interrupt or polling
 	 */
-	uart->UCON = 0x245;
+	writel(0x245, &uart->UCON);
 
 #ifdef CONFIG_HWFLOW
-	uart->UMCON = 0x1; /* RTS up */
+	writel(0x1, &uart->UMCON);	/* RTS up */
 #endif
 
 	/* FIXME: This is sooooooooooooooooooo ugly */
 #if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
 	/* we need auto hw flow control on the gsm and gps port */
 	if (dev_index == 0 || dev_index == 1)
-		uart->UMCON = 0x10;
+		writel(0x10, &uart->UMCON);
 #endif
 	_serial_setbrg(dev_index);
 
@@ -140,7 +164,7 @@ static int serial_init_dev(const int dev_index)
 /* Initialise the serial port. The settings are always 8 data bits, no parity,
  * 1 stop bit, no start bits.
  */
-int serial_init (void)
+int serial_init(void)
 {
 	return serial_init_dev(UART_NR);
 }
@@ -151,40 +175,40 @@ int serial_init (void)
  * otherwise. When the function is succesfull, the character read is
  * written into its argument c.
  */
-int _serial_getc (const int dev_index)
+int _serial_getc(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 
-	/* wait for character to arrive */
-	while (!(uart->UTRSTAT & 0x1));
+	while (!(readl(&uart->UTRSTAT) & 0x1))
+		/* wait for character to arrive */ ;
 
-	return uart->URXH & 0xff;
+	return readb(&uart->URXH) & 0xff;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
 static inline int serial_getc_dev(unsigned int dev_index)
 {
 	return _serial_getc(dev_index);
 }
 #else
-int serial_getc (void)
+int serial_getc(void)
 {
 	return _serial_getc(UART_NR);
 }
 #endif
 
 #ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
 int hwflow_onoff(int on)
 {
-	switch(on) {
+	switch (on) {
 	case 0:
 	default:
-		break; /* return current */
+		break;		/* return current */
 	case 1:
-		hwflow = 1; /* turn on */
+		hwflow = 1;	/* turn on */
 		break;
 	case -1:
-		hwflow = 0; /* turn off */
+		hwflow = 0;	/* turn off */
 		break;
 	}
 	return hwflow;
@@ -208,29 +232,29 @@ void enable_putc(void)
 /*
  * Output a single byte to the serial port.
  */
-void _serial_putc (const char c, const int dev_index)
+void _serial_putc(const char c, const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 #ifdef CONFIG_MODEM_SUPPORT
 	if (be_quiet)
 		return;
 #endif
 
-	/* wait for room in the tx FIFO */
-	while (!(uart->UTRSTAT & 0x2));
+	while (!(readl(&uart->UTRSTAT) & 0x2))
+		/* wait for room in the tx FIFO */ ;
 
 #ifdef CONFIG_HWFLOW
-	/* Wait for CTS up */
-	while(hwflow && !(uart->UMSTAT & 0x1))
-		;
+	while (hwflow && !(readl(&uart->UMSTAT) & 0x1))
+		/* Wait for CTS up */ ;
 #endif
 
-	uart->UTXH = c;
+	writeb(c, &uart->UTXH);
 
 	/* If \n, also do \r */
 	if (c == '\n')
-		serial_putc ('\r');
+		serial_putc('\r');
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
 static inline void serial_putc_dev(unsigned int dev_index, const char c)
 {
@@ -249,13 +273,13 @@ void serial_putc(const char c)
  */
 int _serial_tstc(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 
-	return uart->UTRSTAT & 0x1;
+	return readl(&uart->UTRSTAT) & 0x1;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline int
-serial_tstc_dev(unsigned int dev_index)
+static inline int serial_tstc_dev(unsigned int dev_index)
 {
 	return _serial_tstc(dev_index);
 }
@@ -269,18 +293,17 @@ int serial_tstc(void)
 void _serial_puts(const char *s, const int dev_index)
 {
 	while (*s) {
-		_serial_putc (*s++, dev_index);
+		_serial_putc(*s++, dev_index);
 	}
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_puts_dev(int dev_index, const char *s)
+static inline void serial_puts_dev(int dev_index, const char *s)
 {
 	_serial_puts(s, dev_index);
 }
 #else
-void
-serial_puts (const char *s)
+void serial_puts(const char *s)
 {
 	_serial_puts(s, UART_NR);
 }
@@ -289,12 +312,11 @@ serial_puts (const char *s)
 #if defined(CONFIG_SERIAL_MULTI)
 DECLARE_S3C_SERIAL_FUNCTIONS(0);
 struct serial_device s3c24xx_serial0_device =
-	INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
+INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
 DECLARE_S3C_SERIAL_FUNCTIONS(1);
 struct serial_device s3c24xx_serial1_device =
-	INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
+INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
 DECLARE_S3C_SERIAL_FUNCTIONS(2);
 struct serial_device s3c24xx_serial2_device =
-	INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
-
+INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
 #endif /* CONFIG_SERIAL_MULTI */
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c
new file mode 100644
index 0000000000..68c06a9190
--- /dev/null
+++ b/drivers/serial/serial_s5pc1xx.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+#include <serial.h>
+
+static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+{
+	u32 offset = dev_index * sizeof(struct s5pc1xx_uart);
+
+	if (cpu_is_s5pc100())
+		return (struct s5pc1xx_uart *)(S5PC100_UART_BASE + offset);
+	else
+		return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+	0,
+	0x0080,
+	0x0808,
+	0x0888,
+	0x2222,
+	0x4924,
+	0x4a52,
+	0x54aa,
+	0x5555,
+	0xd555,
+	0xd5d5,
+	0xddd5,
+	0xdddd,
+	0xdfdd,
+	0xdfdf,
+	0xffdf,
+};
+
+void serial_setbrg_dev(const int dev_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+	u32 pclk = get_pclk();
+	u32 baudrate = gd->baudrate;
+	u32 val;
+
+	val = pclk / baudrate;
+
+	writel(val / 16 - 1, &uart->ubrdiv);
+	writew(udivslot[val % 16], &uart->udivslot);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* reset and enable FIFOs, set triggers to the maximum */
+	writel(0, &uart->ufcon);
+	writel(0, &uart->umcon);
+	/* 8N1 */
+	writel(0x3, &uart->ulcon);
+	/* No interrupts, no DMA, pure polling */
+	writel(0x245, &uart->ucon);
+
+	serial_setbrg_dev(dev_index);
+
+	return 0;
+}
+
+static int serial_err_check(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	if (readl(&uart->uerstat) & 0xf)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* wait for character to arrive */
+	while (!(readl(&uart->utrstat) & 0x1)) {
+		if (serial_err_check(dev_index))
+			return 0;
+	}
+
+	return (int)(readl(&uart->urxh) & 0xff);
+}
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc_dev(const char c, const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* wait for room in the tx FIFO */
+	while (!(readl(&uart->utrstat) & 0x2)) {
+		if (serial_err_check(dev_index))
+			return;
+	}
+
+	writel(c, &uart->utxh);
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	return (int)(readl(&uart->utrstat) & 0x1);
+}
+
+void serial_puts_dev(const char *s, const int dev_index)
+{
+	while (*s)
+		serial_putc_dev(*s++, dev_index);
+}
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+	name, \
+	bus, \
+	s5p_serial##port##_init, \
+	s5p_serial##port##_setbrg, \
+	s5p_serial##port##_getc, \
+	s5p_serial##port##_tstc, \
+	s5p_serial##port##_putc, \
+	s5p_serial##port##_puts, }
+
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
+struct serial_device s5pc1xx_serial0_device =
+	INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
+struct serial_device s5pc1xx_serial1_device =
+	INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
+struct serial_device s5pc1xx_serial2_device =
+	INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
+struct serial_device s5pc1xx_serial3_device =
+	INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index ac32510a30..acf12ea7a2 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -71,10 +71,12 @@ typedef volatile unsigned int *	dv_reg_p;
 #define DAVINCI_SPI_BASE			(0x01c66800)
 #define DAVINCI_GPIO_BASE			(0x01c67000)
 #define DAVINCI_VPSS_REGS_BASE			(0x01c70000)
+#if !defined(CONFIG_SOC_DM646X)
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
 #define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
 #define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
 #define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
+#endif
 #define DAVINCI_DDR_BASE			(0x80000000)
 
 #ifdef CONFIG_SOC_DM644X
diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h
index 2246f801e5..34bd515b05 100644
--- a/include/asm-arm/arch-omap3/sys_proto.h
+++ b/include/asm-arm/arch-omap3/sys_proto.h
@@ -34,6 +34,8 @@ void memif_init(void);
 void sdrc_init(void);
 void do_sdrc_init(u32, u32);
 void gpmc_init(void);
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+			u32 size);
 
 void watchdog_init(void);
 void set_muxconf_regs(void);
diff --git a/include/asm-arm/arch-s5pc1xx/clk.h b/include/asm-arm/arch-s5pc1xx/clk.h
new file mode 100644
index 0000000000..f1aa44fd25
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/clk.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+void s5pc1xx_clock_init(void);
+
+extern unsigned long (*get_pll_clk)(int pllreg);
+extern unsigned long (*get_arm_clk)(void);
+extern unsigned long (*get_pclk)(void);
+
+#endif
diff --git a/include/asm-arm/arch-s5pc1xx/clock.h b/include/asm-arm/arch-s5pc1xx/clock.h
new file mode 100644
index 0000000000..7b4eb89905
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/clock.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_CLOCK_H_
+#define __ASM_ARM_ARCH_CLOCK_H_
+
+#ifndef __ASSEMBLY__
+struct s5pc100_clock {
+	unsigned int	apll_lock;
+	unsigned int	mpll_lock;
+	unsigned int	epll_lock;
+	unsigned int	hpll_lock;
+	unsigned char	res1[0xf0];
+	unsigned int	apll_con;
+	unsigned int	mpll_con;
+	unsigned int	epll_con;
+	unsigned int	hpll_con;
+	unsigned char	res2[0xf0];
+	unsigned int	src0;
+	unsigned int	src1;
+	unsigned int	src2;
+	unsigned int	src3;
+	unsigned char	res3[0xf0];
+	unsigned int	div0;
+	unsigned int	div1;
+	unsigned int	div2;
+	unsigned int	div3;
+	unsigned int	div4;
+	unsigned char	res4[0x1ec];
+	unsigned int	gate_d00;
+	unsigned int	gate_d01;
+	unsigned int	gate_d02;
+	unsigned char	res5[0x54];
+	unsigned int	gate_sclk0;
+	unsigned int	gate_sclk1;
+};
+
+struct s5pc110_clock {
+	unsigned int	apll_lock;
+	unsigned char	res1[0x4];
+	unsigned int	mpll_lock;
+	unsigned char	res2[0x4];
+	unsigned int	epll_lock;
+	unsigned char	res3[0xc];
+	unsigned int	vpll_lock;
+	unsigned char	res4[0xdc];
+	unsigned int	apll_con;
+	unsigned char	res5[0x4];
+	unsigned int	mpll_con;
+	unsigned char	res6[0x4];
+	unsigned int	epll_con;
+	unsigned char	res7[0xc];
+	unsigned int	vpll_con;
+	unsigned char	res8[0xdc];
+	unsigned int	src0;
+	unsigned int	src1;
+	unsigned int	src2;
+	unsigned int	src3;
+	unsigned char	res9[0xf0];
+	unsigned int	div0;
+	unsigned int	div1;
+	unsigned int	div2;
+	unsigned int	div3;
+	unsigned int	div4;
+	unsigned char	res10[0x1ec];
+	unsigned int	gate_d00;
+	unsigned int	gate_d01;
+	unsigned int	gate_d02;
+	unsigned char	res11[0x54];
+	unsigned int	gate_sclk0;
+	unsigned int	gate_sclk1;
+};
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-s5pc1xx/cpu.h b/include/asm-arm/arch-s5pc1xx/cpu.h
new file mode 100644
index 0000000000..90485aaff2
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/cpu.h
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _S5PC1XX_CPU_H
+#define _S5PC1XX_CPU_H
+
+#define S5PC1XX_ADDR_BASE	0xE0000000
+
+#define S5PC1XX_CLOCK_BASE	0xE0100000
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	0xE0300000
+#define S5PC100_VIC0_BASE	0xE4000000
+#define S5PC100_VIC1_BASE	0xE4100000
+#define S5PC100_VIC2_BASE	0xE4200000
+#define S5PC100_DMC_BASE	0xE6000000
+#define S5PC100_SROMC_BASE	0xE7000000
+#define S5PC100_ONENAND_BASE	0xE7100000
+#define S5PC100_PWMTIMER_BASE	0xEA000000
+#define S5PC100_WATCHDOG_BASE	0xEA200000
+#define S5PC100_UART_BASE	0xEC000000
+
+/* S5PC110 */
+#define S5PC110_GPIO_BASE	0xE0200000
+#define S5PC110_PWMTIMER_BASE	0xE2500000
+#define S5PC110_WATCHDOG_BASE	0xE2700000
+#define S5PC110_UART_BASE	0xE2900000
+#define S5PC110_SROMC_BASE	0xE8000000
+#define S5PC110_DMC0_BASE	0xF0000000
+#define S5PC110_DMC1_BASE	0xF1400000
+#define S5PC110_VIC0_BASE	0xF2000000
+#define S5PC110_VIC1_BASE	0xF2100000
+#define S5PC110_VIC2_BASE	0xF2200000
+#define S5PC110_VIC3_BASE	0xF2300000
+
+/* Chip ID */
+#define S5PC1XX_PRO_ID		0xE0000000
+
+#ifndef __ASSEMBLY__
+/* CPU detection macros */
+extern unsigned int s5pc1xx_cpu_id;
+
+#define IS_SAMSUNG_TYPE(type, id)			\
+static inline int cpu_is_##type(void)			\
+{							\
+	return s5pc1xx_cpu_id == id ? 1 : 0;		\
+}
+
+IS_SAMSUNG_TYPE(s5pc100, 0xc100)
+IS_SAMSUNG_TYPE(s5pc110, 0xc110)
+#endif
+
+#endif	/* _S5PC1XX_CPU_H */
diff --git a/include/asm-arm/arch-s5pc1xx/gpio.h b/include/asm-arm/arch-s5pc1xx/gpio.h
new file mode 100644
index 0000000000..afbc7ea5ae
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/gpio.h
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+struct s5pc1xx_gpio_bank {
+	unsigned int	con;
+	unsigned int	dat;
+	unsigned int	pull;
+	unsigned int	drv;
+	unsigned int	pdn_con;
+	unsigned int	pdn_pull;
+	unsigned char	res1[8];
+};
+
+struct s5pc100_gpio {
+	struct s5pc1xx_gpio_bank gpio_a0;
+	struct s5pc1xx_gpio_bank gpio_a1;
+	struct s5pc1xx_gpio_bank gpio_b;
+	struct s5pc1xx_gpio_bank gpio_c;
+	struct s5pc1xx_gpio_bank gpio_d;
+	struct s5pc1xx_gpio_bank gpio_e0;
+	struct s5pc1xx_gpio_bank gpio_e1;
+	struct s5pc1xx_gpio_bank gpio_f0;
+	struct s5pc1xx_gpio_bank gpio_f1;
+	struct s5pc1xx_gpio_bank gpio_f2;
+	struct s5pc1xx_gpio_bank gpio_f3;
+	struct s5pc1xx_gpio_bank gpio_g0;
+	struct s5pc1xx_gpio_bank gpio_g1;
+	struct s5pc1xx_gpio_bank gpio_g2;
+	struct s5pc1xx_gpio_bank gpio_g3;
+	struct s5pc1xx_gpio_bank gpio_i;
+	struct s5pc1xx_gpio_bank gpio_j0;
+	struct s5pc1xx_gpio_bank gpio_j1;
+	struct s5pc1xx_gpio_bank gpio_j2;
+	struct s5pc1xx_gpio_bank gpio_j3;
+	struct s5pc1xx_gpio_bank gpio_j4;
+	struct s5pc1xx_gpio_bank gpio_k0;
+	struct s5pc1xx_gpio_bank gpio_k1;
+	struct s5pc1xx_gpio_bank gpio_k2;
+	struct s5pc1xx_gpio_bank gpio_k3;
+	struct s5pc1xx_gpio_bank gpio_l0;
+	struct s5pc1xx_gpio_bank gpio_l1;
+	struct s5pc1xx_gpio_bank gpio_l2;
+	struct s5pc1xx_gpio_bank gpio_l3;
+	struct s5pc1xx_gpio_bank gpio_l4;
+	struct s5pc1xx_gpio_bank gpio_h0;
+	struct s5pc1xx_gpio_bank gpio_h1;
+	struct s5pc1xx_gpio_bank gpio_h2;
+	struct s5pc1xx_gpio_bank gpio_h3;
+};
+
+struct s5pc110_gpio {
+	struct s5pc1xx_gpio_bank gpio_a0;
+	struct s5pc1xx_gpio_bank gpio_a1;
+	struct s5pc1xx_gpio_bank gpio_b;
+	struct s5pc1xx_gpio_bank gpio_c0;
+	struct s5pc1xx_gpio_bank gpio_c1;
+	struct s5pc1xx_gpio_bank gpio_d0;
+	struct s5pc1xx_gpio_bank gpio_d1;
+	struct s5pc1xx_gpio_bank gpio_e0;
+	struct s5pc1xx_gpio_bank gpio_e1;
+	struct s5pc1xx_gpio_bank gpio_f0;
+	struct s5pc1xx_gpio_bank gpio_f1;
+	struct s5pc1xx_gpio_bank gpio_f2;
+	struct s5pc1xx_gpio_bank gpio_f3;
+	struct s5pc1xx_gpio_bank gpio_g0;
+	struct s5pc1xx_gpio_bank gpio_g1;
+	struct s5pc1xx_gpio_bank gpio_g2;
+	struct s5pc1xx_gpio_bank gpio_g3;
+	struct s5pc1xx_gpio_bank gpio_i;
+	struct s5pc1xx_gpio_bank gpio_j0;
+	struct s5pc1xx_gpio_bank gpio_j1;
+	struct s5pc1xx_gpio_bank gpio_j2;
+	struct s5pc1xx_gpio_bank gpio_j3;
+	struct s5pc1xx_gpio_bank gpio_j4;
+	struct s5pc1xx_gpio_bank gpio_mp0_1;
+	struct s5pc1xx_gpio_bank gpio_mp0_2;
+	struct s5pc1xx_gpio_bank gpio_mp0_3;
+	struct s5pc1xx_gpio_bank gpio_mp0_4;
+	struct s5pc1xx_gpio_bank gpio_mp0_5;
+	struct s5pc1xx_gpio_bank gpio_mp0_6;
+	struct s5pc1xx_gpio_bank gpio_mp0_7;
+	struct s5pc1xx_gpio_bank gpio_mp1_0;
+	struct s5pc1xx_gpio_bank gpio_mp1_1;
+	struct s5pc1xx_gpio_bank gpio_mp1_2;
+	struct s5pc1xx_gpio_bank gpio_mp1_3;
+	struct s5pc1xx_gpio_bank gpio_mp1_4;
+	struct s5pc1xx_gpio_bank gpio_mp1_5;
+	struct s5pc1xx_gpio_bank gpio_mp1_6;
+	struct s5pc1xx_gpio_bank gpio_mp1_7;
+	struct s5pc1xx_gpio_bank gpio_mp1_8;
+	struct s5pc1xx_gpio_bank gpio_mp2_0;
+	struct s5pc1xx_gpio_bank gpio_mp2_1;
+	struct s5pc1xx_gpio_bank gpio_mp2_2;
+	struct s5pc1xx_gpio_bank gpio_mp2_3;
+	struct s5pc1xx_gpio_bank gpio_mp2_4;
+	struct s5pc1xx_gpio_bank gpio_mp2_5;
+	struct s5pc1xx_gpio_bank gpio_mp2_6;
+	struct s5pc1xx_gpio_bank gpio_mp2_7;
+	struct s5pc1xx_gpio_bank gpio_mp2_8;
+	struct s5pc1xx_gpio_bank res1[48];
+	struct s5pc1xx_gpio_bank gpio_h0;
+	struct s5pc1xx_gpio_bank gpio_h1;
+	struct s5pc1xx_gpio_bank gpio_h2;
+	struct s5pc1xx_gpio_bank gpio_h3;
+};
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-s5pc1xx/power.h b/include/asm-arm/arch-s5pc1xx/power.h
new file mode 100644
index 0000000000..57e2a2ba19
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/power.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_POWER_H_
+#define __ASM_ARM_ARCH_POWER_H_
+
+/*
+ * Power control
+ */
+#define S5PC100_OTHERS			0xE0108200
+#define S5PC100_RST_STAT		0xE0108300
+#define S5PC100_SLEEP_WAKEUP		(1 << 3)
+#define S5PC100_WAKEUP_STAT		0xE0108304
+#define S5PC100_INFORM0			0xE0108400
+
+#define S5PC110_RST_STAT		0xE010A000
+#define S5PC110_SLEEP_WAKEUP		(1 << 3)
+#define S5PC110_WAKEUP_STAT		0xE010C200
+#define S5PC110_OTHERS			0xE010E000
+#define S5PC110_USB_PHY_CON		0xE010E80C
+#define S5PC110_INFORM0			0xE010F000
+
+#endif
diff --git a/include/asm-arm/arch-s5pc1xx/pwm.h b/include/asm-arm/arch-s5pc1xx/pwm.h
new file mode 100644
index 0000000000..e02a8d8fb3
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/pwm.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_PWM_H_
+#define __ASM_ARM_ARCH_PWM_H_
+
+/* PWM timer addressing */
+#define S5PC100_TIMER_BASE	S5PC100_PWMTIMER_BASE
+#define S5PC110_TIMER_BASE	S5PC110_PWMTIMER_BASE
+
+/* Interval mode(Auto Reload) of PWM Timer 4 */
+#define S5PC1XX_TCON4_AUTO_RELOAD	(1 << 22)
+/* Update TCNTB4 */
+#define S5PC1XX_TCON4_UPDATE		(1 << 21)
+/* start bit of PWM Timer 4 */
+#define S5PC1XX_TCON4_START		(1 << 20)
+
+#ifndef __ASSEMBLY__
+struct s5pc1xx_timer {
+	unsigned int	tcfg0;
+	unsigned int	tcfg1;
+	unsigned int	tcon;
+	unsigned int	tcntb0;
+	unsigned int	tcmpb0;
+	unsigned int	tcnto0;
+	unsigned int	tcntb1;
+	unsigned int	tcmpb1;
+	unsigned int	tcnto1;
+	unsigned int	tcntb2;
+	unsigned int	tcmpb2;
+	unsigned int	tcnto2;
+	unsigned int	tcntb3;
+	unsigned int	res1;
+	unsigned int	tcnto3;
+	unsigned int	tcntb4;
+	unsigned int	tcnto4;
+	unsigned int	tintcstat;
+};
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-arm/arch-s5pc1xx/uart.h b/include/asm-arm/arch-s5pc1xx/uart.h
new file mode 100644
index 0000000000..140dbdc45f
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/uart.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+struct s5pc1xx_uart {
+	unsigned int	ulcon;
+	unsigned int	ucon;
+	unsigned int	ufcon;
+	unsigned int	umcon;
+	unsigned int	utrstat;
+	unsigned int	uerstat;
+	unsigned int	ufstat;
+	unsigned int	umstat;
+	unsigned char	utxh;
+	unsigned char	res1[3];
+	unsigned char	urxh;
+	unsigned char	res2[3];
+	unsigned int	ubrdiv;
+	unsigned short	udivslot;
+	unsigned char	res3[2];
+	unsigned char	res4[0x3d0];
+};
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 4ef8566ea2..de8cfb7c60 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -295,6 +295,7 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 0d3acf61ae..8746f702da 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -189,8 +189,8 @@
 #define CONFIG_SILENT_CONSOLE		1
 
 #define CONFIG_AUTOBOOT_KEYED		1
-#define CONFIG_AUTOBOOT_PROMPT 		\
-	"Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT		\
+	"Press SPACE to abort autoboot\n"
 #define CONFIG_AUTOBOOT_STOP_STR	" "
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"
 
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index d092fb8325..ea40df0bed 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -69,6 +69,7 @@
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
new file mode 100644
index 0000000000..5db720e9d6
--- /dev/null
+++ b/include/configs/davinci_dm355leopard.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DAVINCI_DM355LEOPARD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 3rd stage loader */
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_SYS_NO_FLASH		/* that is, no *NOR* flash */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_DISPLAY_CPUINFO
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS				/* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SOC_DM355				/* DM355 based board */
+
+/* Memory Info */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0x80000000
+#define PHYS_SDRAM_1_SIZE		(128 << 20)	/* 128 MiB */
+
+/* Serial Driver info: UART0 for console  */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_COM1		0x01c20000
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_HZ_CLOCK
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* Ethernet:  external DM9000 */
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE		0x04000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE + 16)
+#define CONFIG_NET_MULTI
+
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_I2C_SLAVE		0x10
+
+/* NAND */
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_HW_ECC
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+
+/* U-Boot command configuration */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+
+#ifdef CONFIG_NAND_DAVINCI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#endif
+
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/* U-Boot general configuration */
+#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CONFIG_SYS_PROMPT	"DM355 LEOPARD # "
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE			/* Print buffer size */ \
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP
+
+#ifdef CONFIG_NAND_DAVINCI
+#define CONFIG_ENV_SIZE		(256 << 10)	/* 256 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET	0x3C0000
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#endif
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTCOMMAND	"dhcp;bootm"
+#define CONFIG_BOOTARGS		\
+			"console=ttyS0,115200n8 " \
+			"root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_NET_RETRY_COUNT 10
+
+/* U-Boot memory configuration */
+#define CONFIG_STACKSIZE		(256 << 10)	/* 256 KiB */
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* for initial data */
+#define CONFIG_SYS_MEMTEST_START	0x87000000	/* physical address */
+#define CONFIG_SYS_MEMTEST_END		0x88000000	/* test 16MB RAM */
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_BARGSIZE	1024			/* bootarg Size */
+#define CONFIG_SYS_LOAD_ADDR	0x80700000		/* kernel address */
+
+#define MTDIDS_DEFAULT		"nand0=davinci_nand.0"
+
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
+#define PART_BOOT		"2m(bootloader)ro,"
+#else
+/* Assume 16K erase blocks; allow a few bad ones. */
+#define PART_BOOT		"512k(bootloader)ro,"
+#endif
+
+#define PART_KERNEL		"4m(kernel),"	/* kernel + initramfs */
+#define PART_REST		"-(filesystem)"
+
+#define MTDPARTS_DEFAULT	\
+	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 2797f827e9..53a105bf6d 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2009 Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -76,6 +77,7 @@
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
new file mode 100644
index 0000000000..2a4cb79f88
--- /dev/null
+++ b/include/configs/davinci_dm6467evm.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Spectrum Digital TMS320DM6467 EVM board */
+#define DAVINCI_DM6467EVM
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS				/* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		27000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SOC_DM646X
+
+/* EEPROM definitions for EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_STACKSIZE		(256 << 10)	/* 256 KiB */
+#define PHYS_SDRAM_1			0x80000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE		(256 << 20)	/* DDR size 256MB */
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_BARGSIZE		1024		/* Bootarg Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* kernel address */
+
+/* Serial Driver info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4
+#define CONFIG_SYS_NS16550_COM1		0x01c20000
+#define CONFIG_SYS_NS16550_CLK		24000000
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		10
+
+/* Flash & Environment */
+#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_NAND_DAVINCI
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KiB */
+#define CONFIG_SYS_NAND_BASE_LIST	{0x42000000, }
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_ENV_OFFSET		0
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE			(4 << 10)	/* 4 KiB */
+#endif
+
+/* U-Boot general configuration */
+#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CONFIG_SYS_PROMPT	"DM6467 EVM > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		\
+			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_BOOTCOMMAND		"source 0x82080000; dhcp; bootm"
+#define CONFIG_BOOTARGS			\
+					"mem=120M console=ttyS0,115200n8 " \
+					"root=/dev/hda1 rw noinitrd ip=dhcp"
+
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#endif
+
+#endif /* __CONFIG_H */
+
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index f7d23990c4..b045e80ae6 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -138,6 +138,7 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define DEF_BOOTM		""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 5a55c569dd..9138b2b90a 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -125,6 +125,7 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define DEF_BOOTM		""
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index a8ac786c64..bd5037e910 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -30,7 +30,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /* High Level Configuration Options */
 #define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
@@ -59,9 +58,9 @@
 #define CONFIG_REVISION_TAG		1
 
 /* Size of malloc() pool */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 
@@ -271,16 +270,16 @@
 #define CONFIG_SYS_HZ			1000
 
 /* The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE		SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ		SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ		SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ		(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ		(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE		SZ_128M	/* at least 128 meg */
+#define PHYS_SDRAM_1_SIZE		(128 << 20)	/* at least 128 MiB */
 #define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -289,7 +288,7 @@
 /* NAND and environment organization  */
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_ENV_IS_IN_NAND		1
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 55eeb947fe..19a5ec92ec 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -27,7 +27,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -62,9 +61,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 
@@ -165,16 +164,27 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
-	"videomode=1024x768@60,vxres=1024,vyres=768\0" \
-	"videospec=omapfb:vram:2M,vram:4M\0" \
+	"vram=12M\0" \
+	"dvimode=1024x768MR-16@60\0" \
+	"defaultdisplay=dvi\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"nandroot=/dev/mtdblock4 rw\0" \
+	"nandrootfstype=jffs2\0" \
 	"mmcargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mmcblk0p2 rw " \
-		"rootfstype=ext3 rootwait\0" \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
 	"nandargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mtdblock4 rw " \
-		"rootfstype=jffs2\0" \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source ${loadaddr}\0" \
@@ -239,10 +249,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -250,7 +260,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -269,7 +279,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 						/* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 72e9626963..a5514aeb9b 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -32,7 +32,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -67,9 +66,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 /*
@@ -231,10 +230,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -242,7 +241,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -261,7 +260,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
 						/* on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 1a9192135e..ffb515d322 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -54,9 +53,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 
@@ -151,16 +150,27 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
-	"videomode=1024x768@60,vxres=1024,vyres=768\0" \
-	"videospec=omapfb:vram:2M,vram:4M\0" \
+	"vram=12M\0" \
+	"dvimode=1024x768MR-16@60\0" \
+	"defaultdisplay=dvi\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"nandroot=/dev/mtdblock4 rw\0" \
+	"nandrootfstype=jffs2\0" \
 	"mmcargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mmcblk0p2 rw " \
-		"rootfstype=ext3 rootwait\0" \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
 	"nandargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mtdblock4 rw " \
-		"rootfstype=jffs2\0" \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapfb.debug=y " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
 	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source ${loadaddr}\0" \
@@ -224,10 +234,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -235,7 +245,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -254,7 +264,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 						/* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 064c0bc690..6f21af3d13 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -22,7 +22,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -57,9 +56,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 
@@ -228,10 +227,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -239,7 +238,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -258,7 +257,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 						/* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
new file mode 100644
index 0000000000..229dc5e644
--- /dev/null
+++ b/include/configs/omap3_sdp3430.h
@@ -0,0 +1,369 @@
+/*
+ * (C) Copyright 2006-2009
+ * Texas Instruments Incorporated.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ * Nishanth Menon <nm@ti.com>
+ *
+ * Configuration settings for the 3430 TI SDP3430 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* TODO: REMOVE THE FOLLOWING
+ * Retained the following till size.h is removed in u-boot
+ */
+#include <asm/sizes.h>
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_3430SDP	1	/* working with SDP Rev2 */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * NOTE:  these #defines presume standard SDP jumper settings.
+ * In particular:
+ *  - 26 MHz clock (not 19.2 or 38.4 MHz)
+ *  - Boot from 128MB NOR, not NAND or OneNAND
+ *
+ * At this writing, OMAP3 U-Boot support doesn't permit concurrent
+ * support for all the flash types the board supports.
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ			/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 256k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE			(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
+ * swapped with UART2 via jumpering.  Downsides of using J8:  it doesn't
+ * support UART boot (that's only for UART3); it prevents sharing a Linux
+ * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
+ *
+ * UART boot uses UART3 on J9, and the SDP user's guide says to use
+ * that for console.  Downsides of using J9:  you can't use IRDA too;
+ * since UART3 isn't in the CORE power domain, it may be a bit less
+ * usable in certain PM-sensitive debug scenarios.
+ */
+#undef CONSOLE_J9			/* else J8/UART1 (innermost) */
+
+#ifdef CONSOLE_J9
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3	/* UART3 */
+#else
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
+#define CONFIG_SERIAL1			1	/* UART1 */
+#endif
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+
+/*
+ * I2C for power management setup
+ */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/* OMITTED:  single 1 Gbit MT29F1G NAND flash */
+
+/*
+ * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
+ */
+#define CONFIG_SYS_FLASH_BASE		0x10000000
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use drivers/cfi_flash.c */
+#define CONFIG_SYS_FLASH_CFI		1	/* use CFI geometry data */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* ~10x faster writes */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware sector protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1	/* flinfo 'E' for empty */
+#define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS      1	/* max number of flash banks */
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH	2
+#define PHYS_FLASH_SIZE			(128 << 20)
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max sectors on one chip */
+
+/* timeout values are in milliseconds */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
+
+/* OMITTED:  single 2 Gbit KFM2G16 OneNAND flash */
+
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_SYS_ENV_SECT_SIZE	(256 << 10)
+#define CONFIG_ENV_OFFSET		CONFIG_SYS_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
+/*--------------------------------------------------------------------------*/
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NET
+
+/* Disabled commands */
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+
+/*--------------------------------------------------------------------------*/
+/*
+ * MMC boot support
+ */
+
+#if defined(CONFIG_CMD_MMC)
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+#endif
+
+/*----------------------------------------------------------------------------
+ * SMSC9115 Ethernet from SMSC9118 family
+ *----------------------------------------------------------------------------
+ */
+#if defined(CONFIG_CMD_NET)
+
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE	DEBUG_BASE
+#define CONFIG_LAN91C96_EXT_PHY
+
+#define CONFIG_BOOTP_SEND_HOSTNAME
+/*
+ * BOOTP fields
+ */
+#define CONFIG_BOOTP_SUBNETMASK		0x00000001
+#define CONFIG_BOOTP_GATEWAY		0x00000002
+#define CONFIG_BOOTP_HOSTNAME		0x00000004
+#define CONFIG_BOOTP_BOOTPATH		0x00000010
+#endif /* (CONFIG_CMD_NET) */
+
+/*
+ * Environment setup
+ *
+ * Default boot order:  mmc bootscript, MMC uImage, NOR image.
+ * Network booting environment must be configured at site.
+ */
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS0,115200n8\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=/dev/mmcblk0p2 rw " \
+		"rootfstype=ext3 rootwait\0" \
+	"norargs=setenv bootargs console=${console} " \
+		"root=/dev/mtdblock3 rw " \
+		"rootfstype=jffs2\0" \
+	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from MMC/SD ...; " \
+		"autoscr ${loadaddr}\0" \
+	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from MMC/SD ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"norboot=echo Booting from NOR ...; " \
+		"run norargs; " \
+		"bootm 0x80000\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmcinit; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run norboot; " \
+			"fi; " \
+		"fi; " \
+	"else run norboot; fi"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"OMAP34XX SDP # "
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
+ * a basic sanity check ONLY
+ * IF you would like to increase coverage, increase the end address
+ * or run the test with custom options
+ */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x01000000)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
+ * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10) /* Regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10) /* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20) /* at least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NOR FLASH usage ... default nCS0:
+ *  - one 256KB sector for U-Boot
+ *  - one 256KB sector for its parameters (not all used)
+ *  - eight sectors (2 MB) for kernel
+ *  - rest for JFFS2
+ */
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+/*
+ * NAND FLASH usage ... default nCS1:
+ *  - four 128KB sectors for X-Loader
+ *  - four 128KB sectors for U-Boot
+ *  - two 128KB sector for its parameters
+ *  - 32 sectors (4 MB) for kernel
+ *  - rest for filesystem
+ */
+
+/*
+ * OneNAND FLASH usage ... default nCS2:
+ *  - four 128KB sectors for X-Loader
+ *  - two 128KB sectors for U-Boot
+ *  - one 128KB sector for its parameters
+ *  - sixteen sectors (2 MB) for kernel
+ *  - rest for filesystem
+ */
+
+/*--------------------------------------------------------------------------*/
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index b55b8f0222..da4b677f93 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -28,7 +28,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -63,9 +62,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 
@@ -236,10 +235,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	SZ_128K	/* regular stack */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	SZ_4K	/* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -247,7 +246,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -266,7 +265,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 						/* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 75ab98098c..32cd6fdb14 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -29,7 +29,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
@@ -64,9 +63,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE			SZ_128K	/* Total Size Environment */
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
 						/* initial data */
 /*
@@ -201,10 +200,10 @@
  *
  * The stack sizes are set up in start.S using these settings
  */
-#define CONFIG_STACKSIZE	SZ_128K
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	SZ_4K
-#define CONFIG_STACKSIZE_FIQ	SZ_4K
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -212,7 +211,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	SZ_32M	/* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -231,7 +230,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 						/* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index f2ea926f92..e6886cf7f6 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -139,9 +139,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CONFIG_SYS_HZ			1562500
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index c234177767..a1beb65d0e 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -141,9 +141,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x0cf00000	/* default load address	*/
 
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CONFIG_SYS_HZ			1562500
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index d340098d0b..c57751bf90 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -124,9 +124,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CONFIG_SYS_HZ			1562500
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
new file mode 100644
index 0000000000..8c472aff47
--- /dev/null
+++ b/include/configs/smdkc100.h
@@ -0,0 +1,242 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * HeungJun Kim <riverful.kim@samsung.com>
+ * Inki Dae <inki.dae@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG SMDKC100 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
+#define CONFIG_S5PC1XX		1	/* which is in a S5PC1XX Family */
+#define CONFIG_S5PC100		1	/* which is in a S5PC100 */
+#define CONFIG_SMDKC100		1	/* working with SMDKC100 */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_L2_OFF
+
+/* input clock of PLL: SMDKC100 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ		12000000
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE		0x30000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ * 1MB = 0x100000, 0x100000 = 1024 * 1024
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for */
+						/* initial data */
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL0			1	/* use SERIAL 0 on SMDKC100 */
+#define CONFIG_SERIAL_MULTI		1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NET
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define MTDIDS_DEFAULT		"onenand0=s3c-onenand"
+#define MTDPARTS_DEFAULT	"mtdparts=s3c-onenand:256k(bootloader)"\
+				",128k@0x40000(params)"\
+				",3m@0x60000(kernel)"\
+				",16m@0x360000(test)"\
+				",-(UBI)"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTCOMMAND	"run ubifsboot"
+
+#define CONFIG_RAMDISK_BOOT	"root=/dev/ram0 rw rootfstype=ext2" \
+				" console=ttySAC0,115200n8" \
+				" mem=128M"
+
+#define CONFIG_COMMON_BOOT	"console=ttySAC0,115200n8" \
+				" mem=128M " \
+				" " MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTARGS	"root=/dev/mtdblock5 ubi.mtd=4" \
+			" rootfstype=cramfs " CONFIG_COMMON_BOOT
+
+#define CONFIG_UPDATEB	"updateb=onenand erase 0x0 0x40000;" \
+			" onenand write 0x32008000 0x0 0x40000\0"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_UPDATEB \
+	"updatek=" \
+		"onenand erase 0x60000 0x300000;" \
+		"onenand write 0x31008000 0x60000 0x300000\0" \
+	"updateu=" \
+		"onenand erase block 147-4095;" \
+		"onenand write 0x32000000 0x1260000 0x8C0000\0" \
+	"bootk=" \
+		"onenand read 0x30007FC0 0x60000 0x300000;" \
+		"bootm 0x30007FC0\0" \
+	"flashboot=" \
+		"set bootargs root=/dev/mtdblock${bootblock} " \
+		"rootfstype=${rootfstype} " \
+		"ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
+		"run bootk\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		" ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
+		"run bootk\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"android=" \
+		"set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
+		"rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
+		"run bootk\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
+		"nfsroot=${nfsroot},nolock " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
+		"run bootk\0" \
+	"ramboot=" \
+		"set bootargs " CONFIG_RAMDISK_BOOT \
+		" initrd=0x33000000,8M ramdisk=8192\0" \
+	"rootfstype=cramfs\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"meminfo=mem=128M\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=5\0" \
+	"ubiblock=4\0" \
+	"ubi=enabled"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"SMDKC100 # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5e00000)
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(256 << 10)	/* 256 KiB */
+
+/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	(128 << 20)	/* 0x8000000, 128 MB Bank #1 */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH		1
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 KiB */
+#define CONFIG_IDENT_STRING		" for SMDKC100"
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+#define CONFIG_SYS_MAPPED_RAM_BASE	0xc0000000
+#else
+#define CONFIG_SYS_MAPPED_RAM_BASE	CONFIG_SYS_SDRAM_BASE
+#endif
+
+/*-----------------------------------------------------------------------
+ * Boot configuration
+ */
+#define CONFIG_ENV_IS_IN_ONENAND	1
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128KiB, 0x20000 */
+#define CONFIG_ENV_ADDR			(256 << 10)	/* 256KiB, 0x40000 */
+#define CONFIG_ENV_OFFSET		(256 << 10)	/* 256KiB, 0x40000 */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND		1
+#define CONFIG_SYS_ONENAND_BASE		0xE7100000
+
+#define CONFIG_DOS_PARTITION		1
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 43c191b435..97f30cea75 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -320,17 +320,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x0CF00000	/* default load address	*/
 
-#ifdef CONFIG_TRAB_50MHZ
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define	CONFIG_SYS_HZ			1562500
-#else
-/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
-/* it to wrap 100 times (total 1039000) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define	CONFIG_SYS_HZ			1039000
-#endif
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 06f7bafeae..9a6f31752e 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -135,6 +135,7 @@ struct onenand_chip {
 #define ONENAND_HAS_CONT_LOCK		(0x0001)
 #define ONENAND_HAS_UNLOCK_ALL		(0x0002)
 #define ONENAND_HAS_2PLANE		(0x0004)
+#define ONENAND_RUNTIME_BADBLOCK_CHECK	(0x0200)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
 #define ONENAND_OOBBUF_ALLOC		(0x2000)
 
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index fc63380d92..07fed1c60f 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -121,6 +121,8 @@
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
 #define ONENAND_CMD_UNLOCK_ALL		(0x27)
 #define ONENAND_CMD_ERASE		(0x94)
+#define ONENAND_CMD_MULTIBLOCK_ERASE	(0x95)
+#define ONENAND_CMD_ERASE_VERIFY	(0x71)
 #define ONENAND_CMD_RESET		(0xF0)
 #define ONENAND_CMD_READID		(0x90)
 
@@ -184,7 +186,9 @@
  * ECC Status Reigser FF00h (R)
  */
 #define ONENAND_ECC_1BIT		(1 << 0)
+#define ONENAND_ECC_1BIT_ALL		(0x5555)
 #define ONENAND_ECC_2BIT		(1 << 1)
 #define ONENAND_ECC_2BIT_ALL		(0xAAAA)
+#define ONENAND_ECC_4BIT_UNCORRECTABLE	(0x1010)
 
 #endif				/* __ONENAND_REG_H */
diff --git a/include/linux/mtd/samsung_onenand.h b/include/linux/mtd/samsung_onenand.h
new file mode 100644
index 0000000000..021fa27f7d
--- /dev/null
+++ b/include/linux/mtd/samsung_onenand.h
@@ -0,0 +1,131 @@
+/*
+ *  Copyright (C) 2005-2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SAMSUNG_ONENAND_H__
+#define __SAMSUNG_ONENAND_H__
+
+/*
+ * OneNAND Controller
+ */
+
+#ifndef __ASSEMBLY__
+struct samsung_onenand {
+	unsigned int	mem_cfg;	/* 0x0000 */
+	unsigned char	res1[0xc];
+	unsigned int	burst_len;	/* 0x0010 */
+	unsigned char	res2[0xc];
+	unsigned int	mem_reset;	/* 0x0020 */
+	unsigned char	res3[0xc];
+	unsigned int	int_err_stat;	/* 0x0030 */
+	unsigned char	res4[0xc];
+	unsigned int	int_err_mask;	/* 0x0040 */
+	unsigned char	res5[0xc];
+	unsigned int	int_err_ack;	/* 0x0050 */
+	unsigned char	res6[0xc];
+	unsigned int	ecc_err_stat;	/* 0x0060 */
+	unsigned char	res7[0xc];
+	unsigned int	manufact_id;	/* 0x0070 */
+	unsigned char	res8[0xc];
+	unsigned int	device_id;	/* 0x0080 */
+	unsigned char	res9[0xc];
+	unsigned int	data_buf_size;	/* 0x0090 */
+	unsigned char	res10[0xc];
+	unsigned int	boot_buf_size;	/* 0x00A0 */
+	unsigned char	res11[0xc];
+	unsigned int	buf_amount;	/* 0x00B0 */
+	unsigned char	res12[0xc];
+	unsigned int	tech;		/* 0x00C0 */
+	unsigned char	res13[0xc];
+	unsigned int	fba;		/* 0x00D0 */
+	unsigned char	res14[0xc];
+	unsigned int	fpa;		/* 0x00E0 */
+	unsigned char	res15[0xc];
+	unsigned int	fsa;		/* 0x00F0 */
+	unsigned char	res16[0x3c];
+	unsigned int	sync_mode;	/* 0x0130 */
+	unsigned char	res17[0xc];
+	unsigned int	trans_spare;	/* 0x0140 */
+	unsigned char	res18[0x3c];
+	unsigned int	err_page_addr;	/* 0x0180 */
+	unsigned char	res19[0x1c];
+	unsigned int	int_pin_en;	/* 0x01A0 */
+	unsigned char	res20[0x1c];
+	unsigned int	acc_clock;	/* 0x01C0 */
+	unsigned char	res21[0x1c];
+	unsigned int	err_blk_addr;	/* 0x01E0 */
+	unsigned char	res22[0xc];
+	unsigned int	flash_ver_id;	/* 0x01F0 */
+	unsigned char	res23[0x6c];
+	unsigned int	watchdog_cnt_low;	/* 0x0260 */
+	unsigned char	res24[0xc];
+	unsigned int	watchdog_cnt_hi;	/* 0x0270 */
+	unsigned char	res25[0xc];
+	unsigned int	sync_write;	/* 0x0280 */
+	unsigned char	res26[0x1c];
+	unsigned int	cold_reset;	/* 0x02A0 */
+	unsigned char	res27[0xc];
+	unsigned int	ddp_device;	/* 0x02B0 */
+	unsigned char	res28[0xc];
+	unsigned int	multi_plane;	/* 0x02C0 */
+	unsigned char	res29[0x1c];
+	unsigned int	trans_mode;	/* 0x02E0 */
+	unsigned char	res30[0x1c];
+	unsigned int	ecc_err_stat2;	/* 0x0300 */
+	unsigned char	res31[0xc];
+	unsigned int	ecc_err_stat3;	/* 0x0310 */
+	unsigned char	res32[0xc];
+	unsigned int	ecc_err_stat4;	/* 0x0320 */
+	unsigned char	res33[0x1c];
+	unsigned int	dev_page_size;	/* 0x0340 */
+	unsigned char	res34[0x4c];
+	unsigned int	int_mon_status;	/* 0x0390 */
+};
+#endif
+
+#define ONENAND_MEM_RESET_HOT	0x3
+#define ONENAND_MEM_RESET_COLD	0x2
+#define ONENAND_MEM_RESET_WARM	0x1
+
+#define INT_ERR_ALL	0x3fff
+#define CACHE_OP_ERR    (1 << 13)
+#define RST_CMP         (1 << 12)
+#define RDY_ACT         (1 << 11)
+#define INT_ACT         (1 << 10)
+#define UNSUP_CMD       (1 << 9)
+#define LOCKED_BLK      (1 << 8)
+#define BLK_RW_CMP      (1 << 7)
+#define ERS_CMP         (1 << 6)
+#define PGM_CMP         (1 << 5)
+#define LOAD_CMP        (1 << 4)
+#define ERS_FAIL        (1 << 3)
+#define PGM_FAIL        (1 << 2)
+#define INT_TO          (1 << 1)
+#define LD_FAIL_ECC_ERR (1 << 0)
+
+#define TSRF		(1 << 0)
+
+/* common initialize function */
+extern void s3c_onenand_init(struct mtd_info *);
+
+#endif
diff --git a/include/s3c2400.h b/include/s3c2400.h
index 4fdc62ec11..062259d102 100644
--- a/include/s3c2400.h
+++ b/include/s3c2400.h
@@ -35,12 +35,12 @@
 #define S3C24X0_SPI_CHANNELS	1
 #define PALETTE			(0x14A00400)	/* SJS */
 
-typedef enum {
+enum s3c24x0_uarts_nr {
 	S3C24X0_UART0,
 	S3C24X0_UART1,
-} S3C24X0_UARTS_NR;
+};
 
-/* S3C2400 device base addresses */
+/*S3C2400 device base addresses */
 #define S3C24X0_MEMCTL_BASE		0x14000000
 #define S3C24X0_USB_HOST_BASE		0x14200000
 #define S3C24X0_INTERRUPT_BASE		0x14400000
@@ -63,492 +63,74 @@ typedef enum {
 #include <s3c24x0.h>
 
 
-static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
+static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
 {
-	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
+	return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
 }
-static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
+static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
 {
-	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
+	return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
 }
-static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
+static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
 {
-	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
+	return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
 }
-static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
+static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
 {
-	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
+	return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
 }
-static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
+static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void)
 {
-	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
+	return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
 }
-static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
+static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
 {
-	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
+	return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
 }
-static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
+static inline struct s3c24x0_uart
+	*s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
 {
-	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
+	return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
 }
-static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
+static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
 {
-	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
+	return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
 }
-static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
+static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
 {
-	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
+	return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
 }
-static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
+static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
 {
-	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
+	return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
 }
-static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
+static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
 {
-	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
+	return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
 }
-static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
+static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
 {
-	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
+	return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
 }
-static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
+static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
 {
-	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
+	return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
 }
-static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
+static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
 {
-	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
+	return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
 }
-static inline S3C2400_ADC * S3C2400_GetBase_ADC(void)
+static inline struct s3c2400_adc *s3c2400_get_base_adc(void)
 {
-	return (S3C2400_ADC * const)S3C24X0_ADC_BASE;
+	return (struct s3c2400_adc *)S3C24X0_ADC_BASE;
 }
-static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
+static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
 {
-	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
+	return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
 }
-static inline S3C2400_MMC * S3C2400_GetBase_MMC(void)
+static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void)
 {
-	return (S3C2400_MMC * const)S3C2400_MMC_BASE;
+	return (struct s3c2400_mmc *)S3C2400_MMC_BASE;
 }
 
-#if 0
-/* Memory control */
-#define rBWSCON		(*(volatile unsigned *)0x14000000)
-#define rBANKCON0	(*(volatile unsigned *)0x14000004)
-#define rBANKCON1	(*(volatile unsigned *)0x14000008)
-#define rBANKCON2	(*(volatile unsigned *)0x1400000C)
-#define rBANKCON3	(*(volatile unsigned *)0x14000010)
-#define rBANKCON4	(*(volatile unsigned *)0x14000014)
-#define rBANKCON5	(*(volatile unsigned *)0x14000018)
-#define rBANKCON6	(*(volatile unsigned *)0x1400001C)
-#define rBANKCON7	(*(volatile unsigned *)0x14000020)
-#define rREFRESH	(*(volatile unsigned *)0x14000024)
-#define rBANKSIZE	(*(volatile unsigned *)0x14000028)
-#define rMRSRB6		(*(volatile unsigned *)0x1400002C)
-#define rMRSRB7		(*(volatile unsigned *)0x14000030)
-
-
-/* INTERRUPT */
-#define rSRCPND		(*(volatile unsigned *)0x14400000)
-#define rINTMOD		(*(volatile unsigned *)0x14400004)
-#define rINTMSK		(*(volatile unsigned *)0x14400008)
-#define rPRIORITY	(*(volatile unsigned *)0x1440000C)
-#define rINTPND		(*(volatile unsigned *)0x14400010)
-#define rINTOFFSET	(*(volatile unsigned *)0x14400014)
-
-
-/* DMA */
-#define rDISRC0		(*(volatile unsigned *)0x14600000)
-#define rDIDST0		(*(volatile unsigned *)0x14600004)
-#define rDCON0		(*(volatile unsigned *)0x14600008)
-#define rDSTAT0		(*(volatile unsigned *)0x1460000C)
-#define rDCSRC0		(*(volatile unsigned *)0x14600010)
-#define rDCDST0		(*(volatile unsigned *)0x14600014)
-#define rDMASKTRIG0	(*(volatile unsigned *)0x14600018)
-#define rDISRC1		(*(volatile unsigned *)0x14600020)
-#define rDIDST1		(*(volatile unsigned *)0x14600024)
-#define rDCON1		(*(volatile unsigned *)0x14600028)
-#define rDSTAT1		(*(volatile unsigned *)0x1460002C)
-#define rDCSRC1		(*(volatile unsigned *)0x14600030)
-#define rDCDST1		(*(volatile unsigned *)0x14600034)
-#define rDMASKTRIG1	(*(volatile unsigned *)0x14600038)
-#define rDISRC2		(*(volatile unsigned *)0x14600040)
-#define rDIDST2		(*(volatile unsigned *)0x14600044)
-#define rDCON2		(*(volatile unsigned *)0x14600048)
-#define rDSTAT2		(*(volatile unsigned *)0x1460004C)
-#define rDCSRC2		(*(volatile unsigned *)0x14600050)
-#define rDCDST2		(*(volatile unsigned *)0x14600054)
-#define rDMASKTRIG2	(*(volatile unsigned *)0x14600058)
-#define rDISRC3		(*(volatile unsigned *)0x14600060)
-#define rDIDST3		(*(volatile unsigned *)0x14600064)
-#define rDCON3		(*(volatile unsigned *)0x14600068)
-#define rDSTAT3		(*(volatile unsigned *)0x1460006C)
-#define rDCSRC3		(*(volatile unsigned *)0x14600070)
-#define rDCDST3		(*(volatile unsigned *)0x14600074)
-#define rDMASKTRIG3	(*(volatile unsigned *)0x14600078)
-
-
-/* CLOCK & POWER MANAGEMENT */
-#define rLOCKTIME	(*(volatile unsigned *)0x14800000)
-#define rMPLLCON	(*(volatile unsigned *)0x14800004)
-#define rUPLLCON	(*(volatile unsigned *)0x14800008)
-#define rCLKCON		(*(volatile unsigned *)0x1480000C)
-#define rCLKSLOW	(*(volatile unsigned *)0x14800010)
-#define rCLKDIVN	(*(volatile unsigned *)0x14800014)
-
-
-/* LCD CONTROLLER */
-#define rLCDCON1	(*(volatile unsigned *)0x14A00000)
-#define rLCDCON2	(*(volatile unsigned *)0x14A00004)
-#define rLCDCON3	(*(volatile unsigned *)0x14A00008)
-#define rLCDCON4	(*(volatile unsigned *)0x14A0000C)
-#define rLCDCON5	(*(volatile unsigned *)0x14A00010)
-#define rLCDSADDR1	(*(volatile unsigned *)0x14A00014)
-#define rLCDSADDR2	(*(volatile unsigned *)0x14A00018)
-#define rLCDSADDR3	(*(volatile unsigned *)0x14A0001C)
-#define rREDLUT		(*(volatile unsigned *)0x14A00020)
-#define rGREENLUT	(*(volatile unsigned *)0x14A00024)
-#define rBLUELUT	(*(volatile unsigned *)0x14A00028)
-#define rDP1_2		(*(volatile unsigned *)0x14A0002C)
-#define rDP4_7		(*(volatile unsigned *)0x14A00030)
-#define rDP3_5		(*(volatile unsigned *)0x14A00034)
-#define rDP2_3		(*(volatile unsigned *)0x14A00038)
-#define rDP5_7		(*(volatile unsigned *)0x14A0003c)
-#define rDP3_4		(*(volatile unsigned *)0x14A00040)
-#define rDP4_5		(*(volatile unsigned *)0x14A00044)
-#define rDP6_7		(*(volatile unsigned *)0x14A00048)
-#define rDITHMODE	(*(volatile unsigned *)0x14A0004C)
-#define rTPAL		(*(volatile unsigned *)0x14A00050)
-#define PALETTE		(0x14A00400)	/* SJS */
-
-
-/* UART */
-#define rULCON0		(*(volatile unsigned char *)0x15000000)
-#define rUCON0		(*(volatile unsigned short *)0x15000004)
-#define rUFCON0		(*(volatile unsigned char *)0x15000008)
-#define rUMCON0		(*(volatile unsigned char *)0x1500000C)
-#define rUTRSTAT0	(*(volatile unsigned char *)0x15000010)
-#define rUERSTAT0	(*(volatile unsigned char *)0x15000014)
-#define rUFSTAT0	(*(volatile unsigned short *)0x15000018)
-#define rUMSTAT0	(*(volatile unsigned char *)0x1500001C)
-#define rUBRDIV0	(*(volatile unsigned short *)0x15000028)
-
-#define rULCON1		(*(volatile unsigned char *)0x15004000)
-#define rUCON1		(*(volatile unsigned short *)0x15004004)
-#define rUFCON1		(*(volatile unsigned char *)0x15004008)
-#define rUMCON1		(*(volatile unsigned char *)0x1500400C)
-#define rUTRSTAT1	(*(volatile unsigned char *)0x15004010)
-#define rUERSTAT1	(*(volatile unsigned char *)0x15004014)
-#define rUFSTAT1	(*(volatile unsigned short *)0x15004018)
-#define rUMSTAT1	(*(volatile unsigned char *)0x1500401C)
-#define rUBRDIV1	(*(volatile unsigned short *)0x15004028)
-
-#ifdef __BIG_ENDIAN
-#define rUTXH0		(*(volatile unsigned char *)0x15000023)
-#define rURXH0		(*(volatile unsigned char *)0x15000027)
-#define rUTXH1		(*(volatile unsigned char *)0x15004023)
-#define rURXH1		(*(volatile unsigned char *)0x15004027)
-
-#define WrUTXH0(ch)	(*(volatile unsigned char *)0x15000023)=(unsigned char)(ch)
-#define RdURXH0()	(*(volatile unsigned char *)0x15000027)
-#define WrUTXH1(ch)	(*(volatile unsigned char *)0x15004023)=(unsigned char)(ch)
-#define RdURXH1()	(*(volatile unsigned char *)0x15004027)
-
-#define UTXH0		(0x15000020+3)  /* byte_access address by DMA */
-#define URXH0		(0x15000024+3)
-#define UTXH1		(0x15004020+3)
-#define URXH1		(0x15004024+3)
-
-#else /* Little Endian */
-#define rUTXH0		(*(volatile unsigned char *)0x15000020)
-#define rURXH0		(*(volatile unsigned char *)0x15000024)
-#define rUTXH1		(*(volatile unsigned char *)0x15004020)
-#define rURXH1		(*(volatile unsigned char *)0x15004024)
-
-#define WrUTXH0(ch)	(*(volatile unsigned char *)0x15000020)=(unsigned char)(ch)
-#define RdURXH0()	(*(volatile unsigned char *)0x15000024)
-#define WrUTXH1(ch)	(*(volatile unsigned char *)0x15004020)=(unsigned char)(ch)
-#define RdURXH1()	(*(volatile unsigned char *)0x15004024)
-
-#define UTXH0		(0x15000020)    /* byte_access address by DMA */
-#define URXH0		(0x15000024)
-#define UTXH1		(0x15004020)
-#define URXH1		(0x15004024)
-#endif
-
-
-/* PWM TIMER */
-#define rTCFG0		(*(volatile unsigned *)0x15100000)
-#define rTCFG1		(*(volatile unsigned *)0x15100004)
-#define rTCON		(*(volatile unsigned *)0x15100008)
-#define rTCNTB0		(*(volatile unsigned *)0x1510000C)
-#define rTCMPB0		(*(volatile unsigned *)0x15100010)
-#define rTCNTO0		(*(volatile unsigned *)0x15100014)
-#define rTCNTB1		(*(volatile unsigned *)0x15100018)
-#define rTCMPB1		(*(volatile unsigned *)0x1510001C)
-#define rTCNTO1		(*(volatile unsigned *)0x15100020)
-#define rTCNTB2		(*(volatile unsigned *)0x15100024)
-#define rTCMPB2		(*(volatile unsigned *)0x15100028)
-#define rTCNTO2		(*(volatile unsigned *)0x1510002C)
-#define rTCNTB3		(*(volatile unsigned *)0x15100030)
-#define rTCMPB3		(*(volatile unsigned *)0x15100034)
-#define rTCNTO3		(*(volatile unsigned *)0x15100038)
-#define rTCNTB4		(*(volatile unsigned *)0x1510003C)
-#define rTCNTO4		(*(volatile unsigned *)0x15100040)
-
-
-/* USB DEVICE */
-#define rFUNC_ADDR_REG	(*(volatile unsigned *)0x15200140)
-#define rPWR_REG	(*(volatile unsigned *)0x15200144)
-#define rINT_REG	(*(volatile unsigned *)0x15200148)
-#define rINT_MASK_REG	(*(volatile unsigned *)0x1520014C)
-#define rFRAME_NUM_REG	(*(volatile unsigned *)0x15200150)
-#define rRESUME_CON_REG	(*(volatile unsigned *)0x15200154)
-#define rEP0_CSR	(*(volatile unsigned *)0x15200160)
-#define rEP0_MAXP	(*(volatile unsigned *)0x15200164)
-#define rEP0_OUT_CNT	(*(volatile unsigned *)0x15200168)
-#define rEP0_FIFO	(*(volatile unsigned *)0x1520016C)
-#define rEP1_IN_CSR	(*(volatile unsigned *)0x15200180)
-#define rEP1_IN_MAXP	(*(volatile unsigned *)0x15200184)
-#define rEP1_FIFO	(*(volatile unsigned *)0x15200188)
-#define rEP2_IN_CSR	(*(volatile unsigned *)0x15200190)
-#define rEP2_IN_MAXP	(*(volatile unsigned *)0x15200194)
-#define rEP2_FIFO	(*(volatile unsigned *)0x15200198)
-#define rEP3_OUT_CSR	(*(volatile unsigned *)0x152001A0)
-#define rEP3_OUT_MAXP	(*(volatile unsigned *)0x152001A4)
-#define rEP3_OUT_CNT	(*(volatile unsigned *)0x152001A8)
-#define rEP3_FIFO	(*(volatile unsigned *)0x152001AC)
-#define rEP4_OUT_CSR	(*(volatile unsigned *)0x152001B0)
-#define rEP4_OUT_MAXP	(*(volatile unsigned *)0x152001B4)
-#define rEP4_OUT_CNT	(*(volatile unsigned *)0x152001B8)
-#define rEP4_FIFO	(*(volatile unsigned *)0x152001BC)
-#define rDMA_CON	(*(volatile unsigned *)0x152001C0)
-#define rDMA_UNIT	(*(volatile unsigned *)0x152001C4)
-#define rDMA_FIFO	(*(volatile unsigned *)0x152001C8)
-#define rDMA_TX		(*(volatile unsigned *)0x152001CC)
-#define rTEST_MODE	(*(volatile unsigned *)0x152001F4)
-#define rIN_CON_REG	(*(volatile unsigned *)0x152001F8)
-
-
-/* WATCH DOG TIMER */
-#define rWTCON		(*(volatile unsigned *)0x15300000)
-#define rWTDAT		(*(volatile unsigned *)0x15300004)
-#define rWTCNT		(*(volatile unsigned *)0x15300008)
-
-
-/* IIC */
-#define rIICCON		(*(volatile unsigned *)0x15400000)
-#define rIICSTAT	(*(volatile unsigned *)0x15400004)
-#define rIICADD		(*(volatile unsigned *)0x15400008)
-#define rIICDS		(*(volatile unsigned *)0x1540000C)
-
-
-/* IIS */
-#define rIISCON		(*(volatile unsigned *)0x15508000)
-#define rIISMOD		(*(volatile unsigned *)0x15508004)
-#define rIISPSR		(*(volatile unsigned *)0x15508008)
-#define rIISFIFCON	(*(volatile unsigned *)0x1550800C)
-
-#ifdef __BIG_ENDIAN
-#define IISFIF		((volatile unsigned short *)0x15508012)
-
-#else /* Little Endian */
-#define IISFIF		((volatile unsigned short *)0x15508010)
-#endif
-
-
-/* I/O PORT */
-#define rPACON		(*(volatile unsigned *)0x15600000)
-#define rPADAT		(*(volatile unsigned *)0x15600004)
-
-#define rPBCON		(*(volatile unsigned *)0x15600008)
-#define rPBDAT		(*(volatile unsigned *)0x1560000C)
-#define rPBUP		(*(volatile unsigned *)0x15600010)
-
-#define rPCCON		(*(volatile unsigned *)0x15600014)
-#define rPCDAT		(*(volatile unsigned *)0x15600018)
-#define rPCUP		(*(volatile unsigned *)0x1560001C)
-
-#define rPDCON		(*(volatile unsigned *)0x15600020)
-#define rPDDAT		(*(volatile unsigned *)0x15600024)
-#define rPDUP		(*(volatile unsigned *)0x15600028)
-
-#define rPECON		(*(volatile unsigned *)0x1560002C)
-#define rPEDAT		(*(volatile unsigned *)0x15600030)
-#define rPEUP		(*(volatile unsigned *)0x15600034)
-
-#define rPFCON		(*(volatile unsigned *)0x15600038)
-#define rPFDAT		(*(volatile unsigned *)0x1560003C)
-#define rPFUP		(*(volatile unsigned *)0x15600040)
-
-#define rPGCON		(*(volatile unsigned *)0x15600044)
-#define rPGDAT		(*(volatile unsigned *)0x15600048)
-#define rPGUP		(*(volatile unsigned *)0x1560004C)
-
-#define rOPENCR		(*(volatile unsigned *)0x15600050)
-#define rMISCCR		(*(volatile unsigned *)0x15600054)
-#define rEXTINT		(*(volatile unsigned *)0x15600058)
-
-
-/* RTC */
-#ifdef __BIG_ENDIAN
-#define rRTCCON		(*(volatile unsigned char *)0x15700043)
-#define rRTCALM		(*(volatile unsigned char *)0x15700053)
-#define rALMSEC		(*(volatile unsigned char *)0x15700057)
-#define rALMMIN		(*(volatile unsigned char *)0x1570005B)
-#define rALMHOUR	(*(volatile unsigned char *)0x1570005F)
-#define rALMDAY		(*(volatile unsigned char *)0x15700063)
-#define rALMMON		(*(volatile unsigned char *)0x15700067)
-#define rALMYEAR	(*(volatile unsigned char *)0x1570006B)
-#define rRTCRST		(*(volatile unsigned char *)0x1570006F)
-#define rBCDSEC		(*(volatile unsigned char *)0x15700073)
-#define rBCDMIN		(*(volatile unsigned char *)0x15700077)
-#define rBCDHOUR	(*(volatile unsigned char *)0x1570007B)
-#define rBCDDAY		(*(volatile unsigned char *)0x1570007F)
-#define rBCDDATE	(*(volatile unsigned char *)0x15700083)
-#define rBCDMON		(*(volatile unsigned char *)0x15700087)
-#define rBCDYEAR	(*(volatile unsigned char *)0x1570008B)
-#define rTICINT		(*(volatile unsigned char *)0x15700047)
-
-#else /* Little Endian */
-#define rRTCCON		(*(volatile unsigned char *)0x15700040)
-#define rRTCALM		(*(volatile unsigned char *)0x15700050)
-#define rALMSEC		(*(volatile unsigned char *)0x15700054)
-#define rALMMIN		(*(volatile unsigned char *)0x15700058)
-#define rALMHOUR	(*(volatile unsigned char *)0x1570005C)
-#define rALMDAY		(*(volatile unsigned char *)0x15700060)
-#define rALMMON		(*(volatile unsigned char *)0x15700064)
-#define rALMYEAR	(*(volatile unsigned char *)0x15700068)
-#define rRTCRST		(*(volatile unsigned char *)0x1570006C)
-#define rBCDSEC		(*(volatile unsigned char *)0x15700070)
-#define rBCDMIN		(*(volatile unsigned char *)0x15700074)
-#define rBCDHOUR	(*(volatile unsigned char *)0x15700078)
-#define rBCDDAY		(*(volatile unsigned char *)0x1570007C)
-#define rBCDDATE	(*(volatile unsigned char *)0x15700080)
-#define rBCDMON		(*(volatile unsigned char *)0x15700084)
-#define rBCDYEAR	(*(volatile unsigned char *)0x15700088)
-#define rTICINT		(*(volatile unsigned char *)0x15700044)
-#endif
-
-
-/* ADC */
-#define rADCCON		(*(volatile unsigned *)0x15800000)
-#define rADCDAT		(*(volatile unsigned *)0x15800004)
-
-
-/* SPI */
-#define rSPCON		(*(volatile unsigned *)0x15900000)
-#define rSPSTA		(*(volatile unsigned *)0x15900004)
-#define rSPPIN		(*(volatile unsigned *)0x15900008)
-#define rSPPRE		(*(volatile unsigned *)0x1590000C)
-#define rSPTDAT		(*(volatile unsigned *)0x15900010)
-#define rSPRDAT		(*(volatile unsigned *)0x15900014)
-
-
-/* MMC INTERFACE */
-#define rMMCON		(*(volatile unsigned *)0x15a00000)
-#define rMMCRR		(*(volatile unsigned *)0x15a00004)
-#define rMMFCON		(*(volatile unsigned *)0x15a00008)
-#define rMMSTA		(*(volatile unsigned *)0x15a0000C)
-#define rMMFSTA		(*(volatile unsigned *)0x15a00010)
-#define rMMPRE		(*(volatile unsigned *)0x15a00014)
-#define rMMLEN		(*(volatile unsigned *)0x15a00018)
-#define rMMCR7		(*(volatile unsigned *)0x15a0001C)
-#define rMMRSP0		(*(volatile unsigned *)0x15a00020)
-#define rMMRSP1		(*(volatile unsigned *)0x15a00024)
-#define rMMRSP2		(*(volatile unsigned *)0x15a00028)
-#define rMMRSP3		(*(volatile unsigned *)0x15a0002C)
-#define rMMCMD0		(*(volatile unsigned *)0x15a00030)
-#define rMMCMD1		(*(volatile unsigned *)0x15a00034)
-#define rMMCR16		(*(volatile unsigned *)0x15a00038)
-#define rMMDAT		(*(volatile unsigned *)0x15a0003C)
-
-
-/* ISR */
-#define pISR_RESET	(*(unsigned *)(_ISR_STARTADDRESS+0x0))
-#define pISR_UNDEF	(*(unsigned *)(_ISR_STARTADDRESS+0x4))
-#define pISR_SWI	(*(unsigned *)(_ISR_STARTADDRESS+0x8))
-#define pISR_PABORT	(*(unsigned *)(_ISR_STARTADDRESS+0xC))
-#define pISR_DABORT	(*(unsigned *)(_ISR_STARTADDRESS+0x10))
-#define pISR_RESERVED	(*(unsigned *)(_ISR_STARTADDRESS+0x14))
-#define pISR_IRQ	(*(unsigned *)(_ISR_STARTADDRESS+0x18))
-#define pISR_FIQ	(*(unsigned *)(_ISR_STARTADDRESS+0x1C))
-
-#define pISR_EINT0	(*(unsigned *)(_ISR_STARTADDRESS+0x20))
-#define pISR_EINT1	(*(unsigned *)(_ISR_STARTADDRESS+0x24))
-#define pISR_EINT2	(*(unsigned *)(_ISR_STARTADDRESS+0x28))
-#define pISR_EINT3	(*(unsigned *)(_ISR_STARTADDRESS+0x2C))
-#define pISR_EINT4	(*(unsigned *)(_ISR_STARTADDRESS+0x30))
-#define pISR_EINT5	(*(unsigned *)(_ISR_STARTADDRESS+0x34))
-#define pISR_EINT6	(*(unsigned *)(_ISR_STARTADDRESS+0x38))
-#define pISR_EINT7	(*(unsigned *)(_ISR_STARTADDRESS+0x3C))
-#define pISR_TICK	(*(unsigned *)(_ISR_STARTADDRESS+0x40))
-#define pISR_WDT	(*(unsigned *)(_ISR_STARTADDRESS+0x44))
-#define pISR_TIMER0	(*(unsigned *)(_ISR_STARTADDRESS+0x48))
-#define pISR_TIMER1	(*(unsigned *)(_ISR_STARTADDRESS+0x4C))
-#define pISR_TIMER2	(*(unsigned *)(_ISR_STARTADDRESS+0x50))
-#define pISR_TIMER3	(*(unsigned *)(_ISR_STARTADDRESS+0x54))
-#define pISR_TIMER4	(*(unsigned *)(_ISR_STARTADDRESS+0x58))
-#define pISR_UERR01	(*(unsigned *)(_ISR_STARTADDRESS+0x5C))
-#define pISR_NOTUSED	(*(unsigned *)(_ISR_STARTADDRESS+0x60))
-#define pISR_DMA0	(*(unsigned *)(_ISR_STARTADDRESS+0x64))
-#define pISR_DMA1	(*(unsigned *)(_ISR_STARTADDRESS+0x68))
-#define pISR_DMA2	(*(unsigned *)(_ISR_STARTADDRESS+0x6C))
-#define pISR_DMA3	(*(unsigned *)(_ISR_STARTADDRESS+0x70))
-#define pISR_MMC	(*(unsigned *)(_ISR_STARTADDRESS+0x74))
-#define pISR_SPI	(*(unsigned *)(_ISR_STARTADDRESS+0x78))
-#define pISR_URXD0	(*(unsigned *)(_ISR_STARTADDRESS+0x7C))
-#define pISR_URXD1	(*(unsigned *)(_ISR_STARTADDRESS+0x80))
-#define pISR_USBD	(*(unsigned *)(_ISR_STARTADDRESS+0x84))
-#define pISR_USBH	(*(unsigned *)(_ISR_STARTADDRESS+0x88))
-#define pISR_IIC	(*(unsigned *)(_ISR_STARTADDRESS+0x8C))
-#define pISR_UTXD0	(*(unsigned *)(_ISR_STARTADDRESS+0x90))
-#define pISR_UTXD1	(*(unsigned *)(_ISR_STARTADDRESS+0x94))
-#define pISR_RTC	(*(unsigned *)(_ISR_STARTADDRESS+0x98))
-#define pISR_ADC	(*(unsigned *)(_ISR_STARTADDRESS+0xA0))
-
-
-/* PENDING BIT */
-#define BIT_EINT0	(0x1)
-#define BIT_EINT1	(0x1<<1)
-#define BIT_EINT2	(0x1<<2)
-#define BIT_EINT3	(0x1<<3)
-#define BIT_EINT4	(0x1<<4)
-#define BIT_EINT5	(0x1<<5)
-#define BIT_EINT6	(0x1<<6)
-#define BIT_EINT7	(0x1<<7)
-#define BIT_TICK	(0x1<<8)
-#define BIT_WDT		(0x1<<9)
-#define BIT_TIMER0	(0x1<<10)
-#define BIT_TIMER1	(0x1<<11)
-#define BIT_TIMER2	(0x1<<12)
-#define BIT_TIMER3	(0x1<<13)
-#define BIT_TIMER4	(0x1<<14)
-#define BIT_UERR01	(0x1<<15)
-#define BIT_NOTUSED	(0x1<<16)
-#define BIT_DMA0	(0x1<<17)
-#define BIT_DMA1	(0x1<<18)
-#define BIT_DMA2	(0x1<<19)
-#define BIT_DMA3	(0x1<<20)
-#define BIT_MMC		(0x1<<21)
-#define BIT_SPI		(0x1<<22)
-#define BIT_URXD0	(0x1<<23)
-#define BIT_URXD1	(0x1<<24)
-#define BIT_USBD	(0x1<<25)
-#define BIT_USBH	(0x1<<26)
-#define BIT_IIC		(0x1<<27)
-#define BIT_UTXD0	(0x1<<28)
-#define BIT_UTXD1	(0x1<<29)
-#define BIT_RTC		(0x1<<30)
-#define BIT_ADC		(0x1<<31)
-#define BIT_ALLMSK	(0xFFFFFFFF)
-
-#define ClearPending(bit) {\
-		 rSRCPND = bit;\
-		 rINTPND = bit;\
-		 rINTPND;\
-		 }
-/* Wait until rINTPND is changed for the case that the ISR is very short. */
-#endif
 #endif /*__S3C2400_H__*/
diff --git a/include/s3c2410.h b/include/s3c2410.h
index 87135b45dd..03b33b4924 100644
--- a/include/s3c2410.h
+++ b/include/s3c2410.h
@@ -38,11 +38,11 @@
 #define S3C2410_ECCSIZE		512
 #define S3C2410_ECCBYTES	3
 
-typedef enum {
+enum s3c24x0_uarts_nr {
 	S3C24X0_UART0,
 	S3C24X0_UART1,
 	S3C24X0_UART2
-} S3C24X0_UARTS_NR;
+};
 
 /* S3C2410 device base addresses */
 #define S3C24X0_MEMCTL_BASE		0x48000000
@@ -69,159 +69,78 @@ typedef enum {
 #include <s3c24x0.h>
 
 
-static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
+static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void)
 {
-	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
+	return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE;
 }
-static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
+static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void)
 {
-	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
+	return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE;
 }
-static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
+static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void)
 {
-	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
+	return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE;
 }
-static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
+static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void)
 {
-	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
+	return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE;
 }
-static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
+static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void)
 {
-	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
+	return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE;
 }
-static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
+static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void)
 {
-	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
+	return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
 }
-static inline S3C2410_NAND * S3C2410_GetBase_NAND(void)
+static inline struct s3c2410_nand *s3c2410_get_base_nand(void)
 {
-	return (S3C2410_NAND * const)S3C2410_NAND_BASE;
+	return (struct s3c2410_nand *)S3C2410_NAND_BASE;
 }
-static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
+static inline struct s3c24x0_uart
+	*s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n)
 {
-	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
+	return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000));
 }
-static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
+static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void)
 {
-	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
+	return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE;
 }
-static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
+static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void)
 {
-	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
+	return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE;
 }
-static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
+static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void)
 {
-	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
+	return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE;
 }
-static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
+static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void)
 {
-	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
+	return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE;
 }
-static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
+static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void)
 {
-	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
+	return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE;
 }
-static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
+static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void)
 {
-	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
+	return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE;
 }
-static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
+static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void)
 {
-	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
+	return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE;
 }
-static inline S3C2410_ADC * S3C2410_GetBase_ADC(void)
+static inline struct s3c2410_adc *s3c2410_get_base_adc(void)
 {
-	return (S3C2410_ADC * const)S3C2410_ADC_BASE;
+	return (struct s3c2410_adc *)S3C2410_ADC_BASE;
 }
-static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
+static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void)
 {
-	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
+	return (struct s3c24x0_spi *)S3C24X0_SPI_BASE;
 }
-static inline S3C2410_SDI * S3C2410_GetBase_SDI(void)
+static inline struct s3c2410_sdi *s3c2410_get_base_sdi(void)
 {
-	return (S3C2410_SDI * const)S3C2410_SDI_BASE;
+	return (struct s3c2410_sdi *)S3C2410_SDI_BASE;
 }
 
-
-/* ISR */
-#define pISR_RESET		(*(unsigned *)(_ISR_STARTADDRESS+0x0))
-#define pISR_UNDEF		(*(unsigned *)(_ISR_STARTADDRESS+0x4))
-#define pISR_SWI		(*(unsigned *)(_ISR_STARTADDRESS+0x8))
-#define pISR_PABORT		(*(unsigned *)(_ISR_STARTADDRESS+0xC))
-#define pISR_DABORT		(*(unsigned *)(_ISR_STARTADDRESS+0x10))
-#define pISR_RESERVED		(*(unsigned *)(_ISR_STARTADDRESS+0x14))
-#define pISR_IRQ		(*(unsigned *)(_ISR_STARTADDRESS+0x18))
-#define pISR_FIQ		(*(unsigned *)(_ISR_STARTADDRESS+0x1C))
-
-#define pISR_EINT0		(*(unsigned *)(_ISR_STARTADDRESS+0x20))
-#define pISR_EINT1		(*(unsigned *)(_ISR_STARTADDRESS+0x24))
-#define pISR_EINT2		(*(unsigned *)(_ISR_STARTADDRESS+0x28))
-#define pISR_EINT3		(*(unsigned *)(_ISR_STARTADDRESS+0x2C))
-#define pISR_EINT4_7		(*(unsigned *)(_ISR_STARTADDRESS+0x30))
-#define pISR_EINT8_23		(*(unsigned *)(_ISR_STARTADDRESS+0x34))
-#define pISR_BAT_FLT		(*(unsigned *)(_ISR_STARTADDRESS+0x3C))
-#define pISR_TICK		(*(unsigned *)(_ISR_STARTADDRESS+0x40))
-#define pISR_WDT		(*(unsigned *)(_ISR_STARTADDRESS+0x44))
-#define pISR_TIMER0		(*(unsigned *)(_ISR_STARTADDRESS+0x48))
-#define pISR_TIMER1		(*(unsigned *)(_ISR_STARTADDRESS+0x4C))
-#define pISR_TIMER2		(*(unsigned *)(_ISR_STARTADDRESS+0x50))
-#define pISR_TIMER3		(*(unsigned *)(_ISR_STARTADDRESS+0x54))
-#define pISR_TIMER4		(*(unsigned *)(_ISR_STARTADDRESS+0x58))
-#define pISR_UART2		(*(unsigned *)(_ISR_STARTADDRESS+0x5C))
-#define pISR_NOTUSED		(*(unsigned *)(_ISR_STARTADDRESS+0x60))
-#define pISR_DMA0		(*(unsigned *)(_ISR_STARTADDRESS+0x64))
-#define pISR_DMA1		(*(unsigned *)(_ISR_STARTADDRESS+0x68))
-#define pISR_DMA2		(*(unsigned *)(_ISR_STARTADDRESS+0x6C))
-#define pISR_DMA3		(*(unsigned *)(_ISR_STARTADDRESS+0x70))
-#define pISR_SDI		(*(unsigned *)(_ISR_STARTADDRESS+0x74))
-#define pISR_SPI0		(*(unsigned *)(_ISR_STARTADDRESS+0x78))
-#define pISR_UART1		(*(unsigned *)(_ISR_STARTADDRESS+0x7C))
-#define pISR_USBD		(*(unsigned *)(_ISR_STARTADDRESS+0x84))
-#define pISR_USBH		(*(unsigned *)(_ISR_STARTADDRESS+0x88))
-#define pISR_IIC		(*(unsigned *)(_ISR_STARTADDRESS+0x8C))
-#define pISR_UART0		(*(unsigned *)(_ISR_STARTADDRESS+0x90))
-#define pISR_SPI1		(*(unsigned *)(_ISR_STARTADDRESS+0x94))
-#define pISR_RTC		(*(unsigned *)(_ISR_STARTADDRESS+0x98))
-#define pISR_ADC		(*(unsigned *)(_ISR_STARTADDRESS+0xA0))
-
-
-/* PENDING BIT */
-#define BIT_EINT0		(0x1)
-#define BIT_EINT1		(0x1<<1)
-#define BIT_EINT2		(0x1<<2)
-#define BIT_EINT3		(0x1<<3)
-#define BIT_EINT4_7		(0x1<<4)
-#define BIT_EINT8_23		(0x1<<5)
-#define BIT_BAT_FLT		(0x1<<7)
-#define BIT_TICK		(0x1<<8)
-#define BIT_WDT			(0x1<<9)
-#define BIT_TIMER0		(0x1<<10)
-#define BIT_TIMER1		(0x1<<11)
-#define BIT_TIMER2		(0x1<<12)
-#define BIT_TIMER3		(0x1<<13)
-#define BIT_TIMER4		(0x1<<14)
-#define BIT_UART2		(0x1<<15)
-#define BIT_LCD			(0x1<<16)
-#define BIT_DMA0		(0x1<<17)
-#define BIT_DMA1		(0x1<<18)
-#define BIT_DMA2		(0x1<<19)
-#define BIT_DMA3		(0x1<<20)
-#define BIT_SDI			(0x1<<21)
-#define BIT_SPI0		(0x1<<22)
-#define BIT_UART1		(0x1<<23)
-#define BIT_USBD		(0x1<<25)
-#define BIT_USBH		(0x1<<26)
-#define BIT_IIC			(0x1<<27)
-#define BIT_UART0		(0x1<<28)
-#define BIT_SPI1		(0x1<<29)
-#define BIT_RTC			(0x1<<30)
-#define BIT_ADC			(0x1<<31)
-#define BIT_ALLMSK		(0xFFFFFFFF)
-
-#define ClearPending(bit) {\
-		 rSRCPND = bit;\
-		 rINTPND = bit;\
-		 rINTPND;\
-		 }
-/* Wait until rINTPND is changed for the case that the ISR is very short. */
 #endif /*__S3C2410_H__*/
diff --git a/include/s3c24x0.h b/include/s3c24x0.h
index 4fa8000681..56a551aeb4 100644
--- a/include/s3c24x0.h
+++ b/include/s3c24x0.h
@@ -36,18 +36,18 @@ typedef volatile u16	S3C24X0_REG16;
 typedef volatile u32	S3C24X0_REG32;
 
 /* Memory controller (see manual chapter 5) */
-typedef struct {
+struct s3c24x0_memctl {
 	S3C24X0_REG32	BWSCON;
 	S3C24X0_REG32	BANKCON[8];
 	S3C24X0_REG32	REFRESH;
 	S3C24X0_REG32	BANKSIZE;
 	S3C24X0_REG32	MRSRB6;
 	S3C24X0_REG32	MRSRB7;
-} /*__attribute__((__packed__))*/ S3C24X0_MEMCTL;
+};
 
 
 /* USB HOST (see manual chapter 12) */
-typedef struct {
+struct s3c24x0_usb_host {
 	S3C24X0_REG32	HcRevision;
 	S3C24X0_REG32	HcControl;
 	S3C24X0_REG32	HcCommonStatus;
@@ -71,11 +71,11 @@ typedef struct {
 	S3C24X0_REG32	HcRhStatus;
 	S3C24X0_REG32	HcRhPortStatus1;
 	S3C24X0_REG32	HcRhPortStatus2;
-} /*__attribute__((__packed__))*/ S3C24X0_USB_HOST;
+};
 
 
 /* INTERRUPT (see manual chapter 14) */
-typedef struct {
+struct s3c24x0_interrupt {
 	S3C24X0_REG32	SRCPND;
 	S3C24X0_REG32	INTMOD;
 	S3C24X0_REG32	INTMSK;
@@ -86,11 +86,11 @@ typedef struct {
 	S3C24X0_REG32	SUBSRCPND;
 	S3C24X0_REG32	INTSUBMSK;
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_INTERRUPT;
+};
 
 
 /* DMAS (see manual chapter 8) */
-typedef struct {
+struct s3c24x0_dma {
 	S3C24X0_REG32	DISRC;
 #ifdef CONFIG_S3C2410
 	S3C24X0_REG32	DISRCC;
@@ -110,27 +110,27 @@ typedef struct {
 #ifdef CONFIG_S3C2410
 	S3C24X0_REG32	res[7];
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_DMA;
+};
 
-typedef struct {
-	S3C24X0_DMA	dma[4];
-} /*__attribute__((__packed__))*/ S3C24X0_DMAS;
+struct s3c24x0_dmas {
+	struct s3c24x0_dma	dma[4];
+};
 
 
 /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */
 /*                          (see S3C2410 manual chapter 7) */
-typedef struct {
+struct s3c24x0_clock_power {
 	S3C24X0_REG32	LOCKTIME;
 	S3C24X0_REG32	MPLLCON;
 	S3C24X0_REG32	UPLLCON;
 	S3C24X0_REG32	CLKCON;
 	S3C24X0_REG32	CLKSLOW;
 	S3C24X0_REG32	CLKDIVN;
-} /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER;
+};
 
 
 /* LCD CONTROLLER (see manual chapter 15) */
-typedef struct {
+struct s3c24x0_lcd {
 	S3C24X0_REG32	LCDCON1;
 	S3C24X0_REG32	LCDCON2;
 	S3C24X0_REG32	LCDCON3;
@@ -151,22 +151,22 @@ typedef struct {
 	S3C24X0_REG32	LCDINTMSK;
 	S3C24X0_REG32	LPCSEL;
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_LCD;
+};
 
 
 /* NAND FLASH (see S3C2410 manual chapter 6) */
-typedef struct {
+struct s3c2410_nand {
 	S3C24X0_REG32	NFCONF;
 	S3C24X0_REG32	NFCMD;
 	S3C24X0_REG32	NFADDR;
 	S3C24X0_REG32	NFDATA;
 	S3C24X0_REG32	NFSTAT;
 	S3C24X0_REG32	NFECC;
-} /*__attribute__((__packed__))*/ S3C2410_NAND;
+};
 
 
 /* UART (see manual chapter 11) */
-typedef struct {
+struct s3c24x0_uart {
 	S3C24X0_REG32	ULCON;
 	S3C24X0_REG32	UCON;
 	S3C24X0_REG32	UFCON;
@@ -187,28 +187,28 @@ typedef struct {
 	S3C24X0_REG8	res2[3];
 #endif
 	S3C24X0_REG32	UBRDIV;
-} /*__attribute__((__packed__))*/ S3C24X0_UART;
+};
 
 
 /* PWM TIMER (see manual chapter 10) */
-typedef struct {
+struct s3c24x0_timer {
 	S3C24X0_REG32	TCNTB;
 	S3C24X0_REG32	TCMPB;
 	S3C24X0_REG32	TCNTO;
-} /*__attribute__((__packed__))*/ S3C24X0_TIMER;
+};
 
-typedef struct {
-	S3C24X0_REG32	TCFG0;
-	S3C24X0_REG32	TCFG1;
-	S3C24X0_REG32	TCON;
-	S3C24X0_TIMER	ch[4];
-	S3C24X0_REG32	TCNTB4;
-	S3C24X0_REG32	TCNTO4;
-} /*__attribute__((__packed__))*/ S3C24X0_TIMERS;
+struct s3c24x0_timers {
+	S3C24X0_REG32		TCFG0;
+	S3C24X0_REG32		TCFG1;
+	S3C24X0_REG32		TCON;
+	struct s3c24x0_timer	ch[4];
+	S3C24X0_REG32		TCNTB4;
+	S3C24X0_REG32		TCNTO4;
+};
 
 
 /* USB DEVICE (see manual chapter 13) */
-typedef struct {
+struct s3c24x0_usb_dev_fifos {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG8	res[3];
 	S3C24X0_REG8	EP_FIFO_REG;
@@ -216,9 +216,9 @@ typedef struct {
 	S3C24X0_REG8	EP_FIFO_REG;
 	S3C24X0_REG8	res[3];
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_FIFOS;
+};
 
-typedef struct {
+struct s3c24x0_usb_dev_dmas {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG8	res1[3];
 	S3C24X0_REG8	EP_DMA_CON;
@@ -246,9 +246,9 @@ typedef struct {
 	S3C24X0_REG8	EP_DMA_TTC_H;
 	S3C24X0_REG8	res6[3];
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_USB_DEV_DMAS;
+};
 
-typedef struct {
+struct s3c24x0_usb_device {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG8	res1[3];
 	S3C24X0_REG8	FUNC_ADDR_REG;
@@ -316,30 +316,30 @@ typedef struct {
 	S3C24X0_REG8	OUT_FIFO_CNT2_REG;
 	S3C24X0_REG8	res16[3];
 #endif /*  __BIG_ENDIAN */
-	S3C24X0_USB_DEV_FIFOS	fifo[5];
-	S3C24X0_USB_DEV_DMAS	dma[5];
-} /*__attribute__((__packed__))*/ S3C24X0_USB_DEVICE;
+	struct s3c24x0_usb_dev_fifos	fifo[5];
+	struct s3c24x0_usb_dev_dmas	dma[5];
+};
 
 
 /* WATCH DOG TIMER (see manual chapter 18) */
-typedef struct {
+struct s3c24x0_watchdog {
 	S3C24X0_REG32	WTCON;
 	S3C24X0_REG32	WTDAT;
 	S3C24X0_REG32	WTCNT;
-} /*__attribute__((__packed__))*/ S3C24X0_WATCHDOG;
+};
 
 
 /* IIC (see manual chapter 20) */
-typedef struct {
+struct s3c24x0_i2c {
 	S3C24X0_REG32	IICCON;
 	S3C24X0_REG32	IICSTAT;
 	S3C24X0_REG32	IICADD;
 	S3C24X0_REG32	IICDS;
-} /*__attribute__((__packed__))*/ S3C24X0_I2C;
+};
 
 
 /* IIS (see manual chapter 21) */
-typedef struct {
+struct s3c24x0_i2s {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG16	res1;
 	S3C24X0_REG16	IISCON;
@@ -363,11 +363,11 @@ typedef struct {
 	S3C24X0_REG16	IISFIFO;
 	S3C24X0_REG16	res5;
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_I2S;
+};
 
 
 /* I/O PORT (see manual chapter 9) */
-typedef struct {
+struct s3c24x0_gpio {
 #ifdef CONFIG_S3C2400
 	S3C24X0_REG32	PACON;
 	S3C24X0_REG32	PADAT;
@@ -451,11 +451,11 @@ typedef struct {
 	S3C24X0_REG32	GSTATUS3;
 	S3C24X0_REG32	GSTATUS4;
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_GPIO;
+};
 
 
 /* RTC (see manual chapter 17) */
-typedef struct {
+struct s3c24x0_rtc {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG8	res1[67];
 	S3C24X0_REG8	RTCCON;
@@ -528,28 +528,28 @@ typedef struct {
 	S3C24X0_REG8	BCDYEAR;
 	S3C24X0_REG8	res17[3];
 #endif
-} /*__attribute__((__packed__))*/ S3C24X0_RTC;
+};
 
 
 /* ADC (see manual chapter 16) */
-typedef struct {
+struct s3c2400_adc {
 	S3C24X0_REG32	ADCCON;
 	S3C24X0_REG32	ADCDAT;
-} /*__attribute__((__packed__))*/ S3C2400_ADC;
+};
 
 
 /* ADC (see manual chapter 16) */
-typedef struct {
+struct s3c2410_adc {
 	S3C24X0_REG32	ADCCON;
 	S3C24X0_REG32	ADCTSC;
 	S3C24X0_REG32	ADCDLY;
 	S3C24X0_REG32	ADCDAT0;
 	S3C24X0_REG32	ADCDAT1;
-} /*__attribute__((__packed__))*/ S3C2410_ADC;
+};
 
 
 /* SPI (see manual chapter 22) */
-typedef struct {
+struct s3c24x0_spi_channel {
 	S3C24X0_REG8	SPCON;
 	S3C24X0_REG8	res1[3];
 	S3C24X0_REG8	SPSTA;
@@ -563,15 +563,15 @@ typedef struct {
 	S3C24X0_REG8	SPRDAT;
 	S3C24X0_REG8	res6[3];
 	S3C24X0_REG8	res7[16];
-} /*__attribute__((__packed__))*/ S3C24X0_SPI_CHANNEL;
+};
 
-typedef struct {
-	S3C24X0_SPI_CHANNEL	ch[S3C24X0_SPI_CHANNELS];
-} /*__attribute__((__packed__))*/ S3C24X0_SPI;
+struct s3c24x0_spi {
+	struct s3c24x0_spi_channel	ch[S3C24X0_SPI_CHANNELS];
+};
 
 
 /* MMC INTERFACE (see S3C2400 manual chapter 19) */
-typedef struct {
+struct s3c2400_mmc {
 #ifdef __BIG_ENDIAN
 	S3C24X0_REG8	res1[3];
 	S3C24X0_REG8	MMCON;
@@ -623,11 +623,11 @@ typedef struct {
 	S3C24X0_REG8	MMDAT;
 	S3C24X0_REG8	res11[3];
 #endif
-} /*__attribute__((__packed__))*/ S3C2400_MMC;
+};
 
 
 /* SD INTERFACE (see S3C2410 manual chapter 19) */
-typedef struct {
+struct s3c2410_sdi {
 	S3C24X0_REG32	SDICON;
 	S3C24X0_REG32	SDIPRE;
 	S3C24X0_REG32	SDICARG;
@@ -651,491 +651,6 @@ typedef struct {
 	S3C24X0_REG8	res[3];
 #endif
 	S3C24X0_REG32	SDIIMSK;
-} /*__attribute__((__packed__))*/ S3C2410_SDI;
-
-
-#if 0
-/* Memory control */
-#define rBWSCON			(*(volatile unsigned *)0x48000000)
-#define rBANKCON0		(*(volatile unsigned *)0x48000004)
-#define rBANKCON1		(*(volatile unsigned *)0x48000008)
-#define rBANKCON2		(*(volatile unsigned *)0x4800000C)
-#define rBANKCON3		(*(volatile unsigned *)0x48000010)
-#define rBANKCON4		(*(volatile unsigned *)0x48000014)
-#define rBANKCON5		(*(volatile unsigned *)0x48000018)
-#define rBANKCON6		(*(volatile unsigned *)0x4800001C)
-#define rBANKCON7		(*(volatile unsigned *)0x48000020)
-#define rREFRESH		(*(volatile unsigned *)0x48000024)
-#define rBANKSIZE		(*(volatile unsigned *)0x48000028)
-#define rMRSRB6			(*(volatile unsigned *)0x4800002C)
-#define rMRSRB7			(*(volatile unsigned *)0x48000030)
-
-
-/* USB HOST */
-#define rHcRevision		(*(volatile unsigned *)0x49000000)
-#define rHcControl		(*(volatile unsigned *)0x49000004)
-#define rHcCommonStatus		(*(volatile unsigned *)0x49000008)
-#define rHcInterruptStatus	(*(volatile unsigned *)0x4900000C)
-#define rHcInterruptEnable	(*(volatile unsigned *)0x49000010)
-#define rHcInterruptDisable	(*(volatile unsigned *)0x49000014)
-#define rHcHCCA			(*(volatile unsigned *)0x49000018)
-#define rHcPeriodCuttendED	(*(volatile unsigned *)0x4900001C)
-#define rHcControlHeadED	(*(volatile unsigned *)0x49000020)
-#define rHcControlCurrentED	(*(volatile unsigned *)0x49000024)
-#define rHcBulkHeadED		(*(volatile unsigned *)0x49000028)
-#define rHcBuldCurrentED	(*(volatile unsigned *)0x4900002C)
-#define rHcDoneHead		(*(volatile unsigned *)0x49000030)
-#define rHcRmInterval		(*(volatile unsigned *)0x49000034)
-#define rHcFmRemaining		(*(volatile unsigned *)0x49000038)
-#define rHcFmNumber		(*(volatile unsigned *)0x4900003C)
-#define rHcPeriodicStart	(*(volatile unsigned *)0x49000040)
-#define rHcLSThreshold		(*(volatile unsigned *)0x49000044)
-#define rHcRhDescriptorA	(*(volatile unsigned *)0x49000048)
-#define rHcRhDescriptorB	(*(volatile unsigned *)0x4900004C)
-#define rHcRhStatus		(*(volatile unsigned *)0x49000050)
-#define rHcRhPortStatus1	(*(volatile unsigned *)0x49000054)
-#define rHcRhPortStatus2	(*(volatile unsigned *)0x49000058)
-
-
-/* INTERRUPT */
-#define rSRCPND			(*(volatile unsigned *)0x4A000000)
-#define rINTMOD			(*(volatile unsigned *)0x4A000004)
-#define rINTMSK			(*(volatile unsigned *)0x4A000008)
-#define rPRIORITY		(*(volatile unsigned *)0x4A00000C)
-#define rINTPND			(*(volatile unsigned *)0x4A000010)
-#define rINTOFFSET		(*(volatile unsigned *)0x4A000014)
-#define rSUBSRCPND		(*(volatile unsigned *)0x4A000018)
-#define rINTSUBMSK		(*(volatile unsigned *)0x4A00001C)
-
-
-/* DMA */
-#define rDISRC0			(*(volatile unsigned *)0x4B000000)
-#define rDISRCC0		(*(volatile unsigned *)0x4B000004)
-#define rDIDST0			(*(volatile unsigned *)0x4B000008)
-#define rDIDSTC0		(*(volatile unsigned *)0x4B00000C)
-#define rDCON0			(*(volatile unsigned *)0x4B000010)
-#define rDSTAT0			(*(volatile unsigned *)0x4B000014)
-#define rDCSRC0			(*(volatile unsigned *)0x4B000018)
-#define rDCDST0			(*(volatile unsigned *)0x4B00001C)
-#define rDMASKTRIG0		(*(volatile unsigned *)0x4B000020)
-#define rDISRC1			(*(volatile unsigned *)0x4B000040)
-#define rDISRCC1		(*(volatile unsigned *)0x4B000044)
-#define rDIDST1			(*(volatile unsigned *)0x4B000048)
-#define rDIDSTC1		(*(volatile unsigned *)0x4B00004C)
-#define rDCON1			(*(volatile unsigned *)0x4B000050)
-#define rDSTAT1			(*(volatile unsigned *)0x4B000054)
-#define rDCSRC1			(*(volatile unsigned *)0x4B000058)
-#define rDCDST1			(*(volatile unsigned *)0x4B00005C)
-#define rDMASKTRIG1		(*(volatile unsigned *)0x4B000060)
-#define rDISRC2			(*(volatile unsigned *)0x4B000080)
-#define rDISRCC2		(*(volatile unsigned *)0x4B000084)
-#define rDIDST2			(*(volatile unsigned *)0x4B000088)
-#define rDIDSTC2		(*(volatile unsigned *)0x4B00008C)
-#define rDCON2			(*(volatile unsigned *)0x4B000090)
-#define rDSTAT2			(*(volatile unsigned *)0x4B000094)
-#define rDCSRC2			(*(volatile unsigned *)0x4B000098)
-#define rDCDST2			(*(volatile unsigned *)0x4B00009C)
-#define rDMASKTRIG2		(*(volatile unsigned *)0x4B0000A0)
-#define rDISRC3			(*(volatile unsigned *)0x4B0000C0)
-#define rDISRCC3		(*(volatile unsigned *)0x4B0000C4)
-#define rDIDST3			(*(volatile unsigned *)0x4B0000C8)
-#define rDIDSTC3		(*(volatile unsigned *)0x4B0000CC)
-#define rDCON3			(*(volatile unsigned *)0x4B0000D0)
-#define rDSTAT3			(*(volatile unsigned *)0x4B0000D4)
-#define rDCSRC3			(*(volatile unsigned *)0x4B0000D8)
-#define rDCDST3			(*(volatile unsigned *)0x4B0000DC)
-#define rDMASKTRIG3		(*(volatile unsigned *)0x4B0000E0)
-
-
-/* CLOCK & POWER MANAGEMENT */
-#define rLOCKTIME		(*(volatile unsigned *)0x4C000000)
-#define rMPLLCON		(*(volatile unsigned *)0x4C000004)
-#define rUPLLCON		(*(volatile unsigned *)0x4C000008)
-#define rCLKCON			(*(volatile unsigned *)0x4C00000C)
-#define rCLKSLOW		(*(volatile unsigned *)0x4C000010)
-#define rCLKDIVN		(*(volatile unsigned *)0x4C000014)
-
-
-/* LCD CONTROLLER */
-#define rLCDCON1		(*(volatile unsigned *)0x4D000000)
-#define rLCDCON2		(*(volatile unsigned *)0x4D000004)
-#define rLCDCON3		(*(volatile unsigned *)0x4D000008)
-#define rLCDCON4		(*(volatile unsigned *)0x4D00000C)
-#define rLCDCON5		(*(volatile unsigned *)0x4D000010)
-#define rLCDSADDR1		(*(volatile unsigned *)0x4D000014)
-#define rLCDSADDR2		(*(volatile unsigned *)0x4D000018)
-#define rLCDSADDR3		(*(volatile unsigned *)0x4D00001C)
-#define rREDLUT			(*(volatile unsigned *)0x4D000020)
-#define rGREENLUT		(*(volatile unsigned *)0x4D000024)
-#define rBLUELUT		(*(volatile unsigned *)0x4D000028)
-#define rDITHMODE		(*(volatile unsigned *)0x4D00004C)
-#define rTPAL			(*(volatile unsigned *)0x4D000050)
-#define rLCDINTPND		(*(volatile unsigned *)0x4D000054)
-#define rLCDSRCPND		(*(volatile unsigned *)0x4D000058)
-#define rLCDINTMSK		(*(volatile unsigned *)0x4D00005C)
-
-
-/* NAND FLASH */
-#define rNFCONF			(*(volatile unsigned *)0x4E000000)
-#define rNFCMD			(*(volatile unsigned *)0x4E000004)
-#define rNFADDR			(*(volatile unsigned *)0x4E000008)
-#define rNFDATA			(*(volatile unsigned *)0x4E00000C)
-#define rNFSTAT			(*(volatile unsigned *)0x4E000010)
-#define rNFECC			(*(volatile unsigned *)0x4E000014)
-
-
-/* UART */
-#define rULCON0			(*(volatile unsigned *)0x50000000)
-#define rUCON0			(*(volatile unsigned *)0x50000004)
-#define rUFCON0			(*(volatile unsigned *)0x50000008)
-#define rUMCON0			(*(volatile unsigned *)0x5000000C)
-#define rUTRSTAT0		(*(volatile unsigned *)0x50000010)
-#define rUERSTAT0		(*(volatile unsigned *)0x50000014)
-#define rUFSTAT0		(*(volatile unsigned *)0x50000018)
-#define rUMSTAT0		(*(volatile unsigned *)0x5000001C)
-#define rUBRDIV0		(*(volatile unsigned *)0x50000028)
-
-#define rULCON1			(*(volatile unsigned *)0x50004000)
-#define rUCON1			(*(volatile unsigned *)0x50004004)
-#define rUFCON1			(*(volatile unsigned *)0x50004008)
-#define rUMCON1			(*(volatile unsigned *)0x5000400C)
-#define rUTRSTAT1		(*(volatile unsigned *)0x50004010)
-#define rUERSTAT1		(*(volatile unsigned *)0x50004014)
-#define rUFSTAT1		(*(volatile unsigned *)0x50004018)
-#define rUMSTAT1		(*(volatile unsigned *)0x5000401C)
-#define rUBRDIV1		(*(volatile unsigned *)0x50004028)
-
-#define rULCON2			(*(volatile unsigned *)0x50008000)
-#define rUCON2			(*(volatile unsigned *)0x50008004)
-#define rUFCON2			(*(volatile unsigned *)0x50008008)
-#define rUTRSTAT2		(*(volatile unsigned *)0x50008010)
-#define rUERSTAT2		(*(volatile unsigned *)0x50008014)
-#define rUFSTAT2		(*(volatile unsigned *)0x50008018)
-#define rUBRDIV2		(*(volatile unsigned *)0x50008028)
-
-#ifdef __BIG_ENDIAN
-#define rUTXH0			(*(volatile unsigned char *)0x50000023)
-#define rURXH0			(*(volatile unsigned char *)0x50000027)
-#define rUTXH1			(*(volatile unsigned char *)0x50004023)
-#define rURXH1			(*(volatile unsigned char *)0x50004027)
-#define rUTXH2			(*(volatile unsigned char *)0x50008023)
-#define rURXH2			(*(volatile unsigned char *)0x50008027)
-
-#define WrUTXH0(ch)		(*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
-#define RdURXH0()		(*(volatile unsigned char *)0x50000027)
-#define WrUTXH1(ch)		(*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
-#define RdURXH1()		(*(volatile unsigned char *)0x50004027)
-#define WrUTXH2(ch)		(*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
-#define RdURXH2()		(*(volatile unsigned char *)0x50008027)
-
-#define UTXH0			(0x50000020+3)  /* byte_access address by DMA */
-#define URXH0			(0x50000024+3)
-#define UTXH1			(0x50004020+3)
-#define URXH1			(0x50004024+3)
-#define UTXH2			(0x50008020+3)
-#define URXH2			(0x50008024+3)
-
-#else /* Little Endian */
-#define rUTXH0			(*(volatile unsigned char *)0x50000020)
-#define rURXH0			(*(volatile unsigned char *)0x50000024)
-#define rUTXH1			(*(volatile unsigned char *)0x50004020)
-#define rURXH1			(*(volatile unsigned char *)0x50004024)
-#define rUTXH2			(*(volatile unsigned char *)0x50008020)
-#define rURXH2			(*(volatile unsigned char *)0x50008024)
-
-#define WrUTXH0(ch)		(*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
-#define RdURXH0()		(*(volatile unsigned char *)0x50000024)
-#define WrUTXH1(ch)		(*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
-#define RdURXH1()		(*(volatile unsigned char *)0x50004024)
-#define WrUTXH2(ch)		(*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
-#define RdURXH2()		(*(volatile unsigned char *)0x50008024)
-
-#define UTXH0			(0x50000020)    /* byte_access address by DMA */
-#define URXH0			(0x50000024)
-#define UTXH1			(0x50004020)
-#define URXH1			(0x50004024)
-#define UTXH2			(0x50008020)
-#define URXH2			(0x50008024)
-#endif
-
-
-/* PWM TIMER */
-#define rTCFG0			(*(volatile unsigned *)0x51000000)
-#define rTCFG1			(*(volatile unsigned *)0x51000004)
-#define rTCON			(*(volatile unsigned *)0x51000008)
-#define rTCNTB0			(*(volatile unsigned *)0x5100000C)
-#define rTCMPB0			(*(volatile unsigned *)0x51000010)
-#define rTCNTO0			(*(volatile unsigned *)0x51000014)
-#define rTCNTB1			(*(volatile unsigned *)0x51000018)
-#define rTCMPB1			(*(volatile unsigned *)0x5100001C)
-#define rTCNTO1			(*(volatile unsigned *)0x51000020)
-#define rTCNTB2			(*(volatile unsigned *)0x51000024)
-#define rTCMPB2			(*(volatile unsigned *)0x51000028)
-#define rTCNTO2			(*(volatile unsigned *)0x5100002C)
-#define rTCNTB3			(*(volatile unsigned *)0x51000030)
-#define rTCMPB3			(*(volatile unsigned *)0x51000034)
-#define rTCNTO3			(*(volatile unsigned *)0x51000038)
-#define rTCNTB4			(*(volatile unsigned *)0x5100003C)
-#define rTCNTO4			(*(volatile unsigned *)0x51000040)
-
-
-/* USB DEVICE */
-#ifdef __BIG_ENDIAN
-#define rFUNC_ADDR_REG		(*(volatile unsigned char *)0x52000143)
-#define rPWR_REG		(*(volatile unsigned char *)0x52000147)
-#define rEP_INT_REG		(*(volatile unsigned char *)0x5200014B)
-#define rUSB_INT_REG		(*(volatile unsigned char *)0x5200015B)
-#define rEP_INT_EN_REG		(*(volatile unsigned char *)0x5200015F)
-#define rUSB_INT_EN_REG		(*(volatile unsigned char *)0x5200016F)
-#define rFRAME_NUM1_REG		(*(volatile unsigned char *)0x52000173)
-#define rFRAME_NUM2_REG		(*(volatile unsigned char *)0x52000177)
-#define rINDEX_REG		(*(volatile unsigned char *)0x5200017B)
-#define rMAXP_REG		(*(volatile unsigned char *)0x52000183)
-#define rEP0_CSR		(*(volatile unsigned char *)0x52000187)
-#define rIN_CSR1_REG		(*(volatile unsigned char *)0x52000187)
-#define rIN_CSR2_REG		(*(volatile unsigned char *)0x5200018B)
-#define rOUT_CSR1_REG		(*(volatile unsigned char *)0x52000193)
-#define rOUT_CSR2_REG		(*(volatile unsigned char *)0x52000197)
-#define rOUT_FIFO_CNT1_REG	(*(volatile unsigned char *)0x5200019B)
-#define rOUT_FIFO_CNT2_REG	(*(volatile unsigned char *)0x5200019F)
-#define rEP0_FIFO		(*(volatile unsigned char *)0x520001C3)
-#define rEP1_FIFO		(*(volatile unsigned char *)0x520001C7)
-#define rEP2_FIFO		(*(volatile unsigned char *)0x520001CB)
-#define rEP3_FIFO		(*(volatile unsigned char *)0x520001CF)
-#define rEP4_FIFO		(*(volatile unsigned char *)0x520001D3)
-#define rEP1_DMA_CON		(*(volatile unsigned char *)0x52000203)
-#define rEP1_DMA_UNIT		(*(volatile unsigned char *)0x52000207)
-#define rEP1_DMA_FIFO		(*(volatile unsigned char *)0x5200020B)
-#define rEP1_DMA_TX_LO		(*(volatile unsigned char *)0x5200020F)
-#define rEP1_DMA_TX_MD		(*(volatile unsigned char *)0x52000213)
-#define rEP1_DMA_TX_HI		(*(volatile unsigned char *)0x52000217)
-#define rEP2_DMA_CON		(*(volatile unsigned char *)0x5200021B)
-#define rEP2_DMA_UNIT		(*(volatile unsigned char *)0x5200021F)
-#define rEP2_DMA_FIFO		(*(volatile unsigned char *)0x52000223)
-#define rEP2_DMA_TX_LO		(*(volatile unsigned char *)0x52000227)
-#define rEP2_DMA_TX_MD		(*(volatile unsigned char *)0x5200022B)
-#define rEP2_DMA_TX_HI		(*(volatile unsigned char *)0x5200022F)
-#define rEP3_DMA_CON		(*(volatile unsigned char *)0x52000243)
-#define rEP3_DMA_UNIT		(*(volatile unsigned char *)0x52000247)
-#define rEP3_DMA_FIFO		(*(volatile unsigned char *)0x5200024B)
-#define rEP3_DMA_TX_LO		(*(volatile unsigned char *)0x5200024F)
-#define rEP3_DMA_TX_MD		(*(volatile unsigned char *)0x52000253)
-#define rEP3_DMA_TX_HI		(*(volatile unsigned char *)0x52000257)
-#define rEP4_DMA_CON		(*(volatile unsigned char *)0x5200025B)
-#define rEP4_DMA_UNIT		(*(volatile unsigned char *)0x5200025F)
-#define rEP4_DMA_FIFO		(*(volatile unsigned char *)0x52000263)
-#define rEP4_DMA_TX_LO		(*(volatile unsigned char *)0x52000267)
-#define rEP4_DMA_TX_MD		(*(volatile unsigned char *)0x5200026B)
-#define rEP4_DMA_TX_HI		(*(volatile unsigned char *)0x5200026F)
-#else /*  little endian */
-#define rFUNC_ADDR_REG		(*(volatile unsigned char *)0x52000140)
-#define rPWR_REG		(*(volatile unsigned char *)0x52000144)
-#define rEP_INT_REG		(*(volatile unsigned char *)0x52000148)
-#define rUSB_INT_REG		(*(volatile unsigned char *)0x52000158)
-#define rEP_INT_EN_REG		(*(volatile unsigned char *)0x5200015C)
-#define rUSB_INT_EN_REG		(*(volatile unsigned char *)0x5200016C)
-#define rFRAME_NUM1_REG		(*(volatile unsigned char *)0x52000170)
-#define rFRAME_NUM2_REG		(*(volatile unsigned char *)0x52000174)
-#define rINDEX_REG		(*(volatile unsigned char *)0x52000178)
-#define rMAXP_REG		(*(volatile unsigned char *)0x52000180)
-#define rEP0_CSR		(*(volatile unsigned char *)0x52000184)
-#define rIN_CSR1_REG		(*(volatile unsigned char *)0x52000184)
-#define rIN_CSR2_REG		(*(volatile unsigned char *)0x52000188)
-#define rOUT_CSR1_REG		(*(volatile unsigned char *)0x52000190)
-#define rOUT_CSR2_REG		(*(volatile unsigned char *)0x52000194)
-#define rOUT_FIFO_CNT1_REG	(*(volatile unsigned char *)0x52000198)
-#define rOUT_FIFO_CNT2_REG	(*(volatile unsigned char *)0x5200019C)
-#define rEP0_FIFO		(*(volatile unsigned char *)0x520001C0)
-#define rEP1_FIFO		(*(volatile unsigned char *)0x520001C4)
-#define rEP2_FIFO		(*(volatile unsigned char *)0x520001C8)
-#define rEP3_FIFO		(*(volatile unsigned char *)0x520001CC)
-#define rEP4_FIFO		(*(volatile unsigned char *)0x520001D0)
-#define rEP1_DMA_CON		(*(volatile unsigned char *)0x52000200)
-#define rEP1_DMA_UNIT		(*(volatile unsigned char *)0x52000204)
-#define rEP1_DMA_FIFO		(*(volatile unsigned char *)0x52000208)
-#define rEP1_DMA_TX_LO		(*(volatile unsigned char *)0x5200020C)
-#define rEP1_DMA_TX_MD		(*(volatile unsigned char *)0x52000210)
-#define rEP1_DMA_TX_HI		(*(volatile unsigned char *)0x52000214)
-#define rEP2_DMA_CON		(*(volatile unsigned char *)0x52000218)
-#define rEP2_DMA_UNIT		(*(volatile unsigned char *)0x5200021C)
-#define rEP2_DMA_FIFO		(*(volatile unsigned char *)0x52000220)
-#define rEP2_DMA_TX_LO		(*(volatile unsigned char *)0x52000224)
-#define rEP2_DMA_TX_MD		(*(volatile unsigned char *)0x52000228)
-#define rEP2_DMA_TX_HI		(*(volatile unsigned char *)0x5200022C)
-#define rEP3_DMA_CON		(*(volatile unsigned char *)0x52000240)
-#define rEP3_DMA_UNIT		(*(volatile unsigned char *)0x52000244)
-#define rEP3_DMA_FIFO		(*(volatile unsigned char *)0x52000248)
-#define rEP3_DMA_TX_LO		(*(volatile unsigned char *)0x5200024C)
-#define rEP3_DMA_TX_MD		(*(volatile unsigned char *)0x52000250)
-#define rEP3_DMA_TX_HI		(*(volatile unsigned char *)0x52000254)
-#define rEP4_DMA_CON		(*(volatile unsigned char *)0x52000258)
-#define rEP4_DMA_UNIT		(*(volatile unsigned char *)0x5200025C)
-#define rEP4_DMA_FIFO		(*(volatile unsigned char *)0x52000260)
-#define rEP4_DMA_TX_LO		(*(volatile unsigned char *)0x52000264)
-#define rEP4_DMA_TX_MD		(*(volatile unsigned char *)0x52000268)
-#define rEP4_DMA_TX_HI		(*(volatile unsigned char *)0x5200026C)
-#endif /*  __BIG_ENDIAN */
-
-
-/* WATCH DOG TIMER */
-#define rWTCON			(*(volatile unsigned *)0x53000000)
-#define rWTDAT			(*(volatile unsigned *)0x53000004)
-#define rWTCNT			(*(volatile unsigned *)0x53000008)
-
-
-/* IIC */
-#define rIICCON			(*(volatile unsigned *)0x54000000)
-#define rIICSTAT		(*(volatile unsigned *)0x54000004)
-#define rIICADD			(*(volatile unsigned *)0x54000008)
-#define rIICDS			(*(volatile unsigned *)0x5400000C)
-
-
-/* IIS */
-#define rIISCON			(*(volatile unsigned *)0x55000000)
-#define rIISMOD			(*(volatile unsigned *)0x55000004)
-#define rIISPSR			(*(volatile unsigned *)0x55000008)
-#define rIISFCON		(*(volatile unsigned *)0x5500000C)
-
-#ifdef __BIG_ENDIAN
-#define IISFIF			((volatile unsigned short *)0x55000012)
-#else /*  little endian */
-#define IISFIF			((volatile unsigned short *)0x55000010)
-#endif
-
-
-/* I/O PORT */
-#define rGPACON			(*(volatile unsigned *)0x56000000)
-#define rGPADAT			(*(volatile unsigned *)0x56000004)
-
-#define rGPBCON			(*(volatile unsigned *)0x56000010)
-#define rGPBDAT			(*(volatile unsigned *)0x56000014)
-#define rGPBUP			(*(volatile unsigned *)0x56000018)
-
-#define rGPCCON			(*(volatile unsigned *)0x56000020)
-#define rGPCDAT			(*(volatile unsigned *)0x56000024)
-#define rGPCUP			(*(volatile unsigned *)0x56000028)
-
-#define rGPDCON			(*(volatile unsigned *)0x56000030)
-#define rGPDDAT			(*(volatile unsigned *)0x56000034)
-#define rGPDUP			(*(volatile unsigned *)0x56000038)
-
-#define rGPECON			(*(volatile unsigned *)0x56000040)
-#define rGPEDAT			(*(volatile unsigned *)0x56000044)
-#define rGPEUP			(*(volatile unsigned *)0x56000048)
-
-#define rGPFCON			(*(volatile unsigned *)0x56000050)
-#define rGPFDAT			(*(volatile unsigned *)0x56000054)
-#define rGPFUP			(*(volatile unsigned *)0x56000058)
-
-#define rGPGCON			(*(volatile unsigned *)0x56000060)
-#define rGPGDAT			(*(volatile unsigned *)0x56000064)
-#define rGPGUP			(*(volatile unsigned *)0x56000068)
-
-#define rGPHCON			(*(volatile unsigned *)0x56000070)
-#define rGPHDAT			(*(volatile unsigned *)0x56000074)
-#define rGPHUP			(*(volatile unsigned *)0x56000078)
-
-#define rMISCCR			(*(volatile unsigned *)0x56000080)
-#define rDCLKCON		(*(volatile unsigned *)0x56000084)
-#define rEXTINT0		(*(volatile unsigned *)0x56000088)
-#define rEXTINT1		(*(volatile unsigned *)0x5600008C)
-#define rEXTINT2		(*(volatile unsigned *)0x56000090)
-#define rEINTFLT0		(*(volatile unsigned *)0x56000094)
-#define rEINTFLT1		(*(volatile unsigned *)0x56000098)
-#define rEINTFLT2		(*(volatile unsigned *)0x5600009C)
-#define rEINTFLT3		(*(volatile unsigned *)0x560000A0)
-#define rEINTMASK		(*(volatile unsigned *)0x560000A4)
-#define rEINTPEND		(*(volatile unsigned *)0x560000A8)
-#define rGSTATUS0		(*(volatile unsigned *)0x560000AC)
-#define rGSTATUS1		(*(volatile unsigned *)0x560000B0)
-
-
-/* RTC */
-#ifdef __BIG_ENDIAN
-#define rRTCCON			(*(volatile unsigned char *)0x57000043)
-#define rTICNT			(*(volatile unsigned char *)0x57000047)
-#define rRTCALM			(*(volatile unsigned char *)0x57000053)
-#define rALMSEC			(*(volatile unsigned char *)0x57000057)
-#define rALMMIN			(*(volatile unsigned char *)0x5700005B)
-#define rALMHOUR		(*(volatile unsigned char *)0x5700005F)
-#define rALMDATE		(*(volatile unsigned char *)0x57000063)
-#define rALMMON			(*(volatile unsigned char *)0x57000067)
-#define rALMYEAR		(*(volatile unsigned char *)0x5700006B)
-#define rRTCRST			(*(volatile unsigned char *)0x5700006F)
-#define rBCDSEC			(*(volatile unsigned char *)0x57000073)
-#define rBCDMIN			(*(volatile unsigned char *)0x57000077)
-#define rBCDHOUR		(*(volatile unsigned char *)0x5700007B)
-#define rBCDDATE		(*(volatile unsigned char *)0x5700007F)
-#define rBCDDAY			(*(volatile unsigned char *)0x57000083)
-#define rBCDMON			(*(volatile unsigned char *)0x57000087)
-#define rBCDYEAR		(*(volatile unsigned char *)0x5700008B)
-#else /*  little endian */
-#define rRTCCON			(*(volatile unsigned char *)0x57000040)
-#define rTICNT			(*(volatile unsigned char *)0x57000044)
-#define rRTCALM			(*(volatile unsigned char *)0x57000050)
-#define rALMSEC			(*(volatile unsigned char *)0x57000054)
-#define rALMMIN			(*(volatile unsigned char *)0x57000058)
-#define rALMHOUR		(*(volatile unsigned char *)0x5700005C)
-#define rALMDATE		(*(volatile unsigned char *)0x57000060)
-#define rALMMON			(*(volatile unsigned char *)0x57000064)
-#define rALMYEAR		(*(volatile unsigned char *)0x57000068)
-#define rRTCRST			(*(volatile unsigned char *)0x5700006C)
-#define rBCDSEC			(*(volatile unsigned char *)0x57000070)
-#define rBCDMIN			(*(volatile unsigned char *)0x57000074)
-#define rBCDHOUR		(*(volatile unsigned char *)0x57000078)
-#define rBCDDATE		(*(volatile unsigned char *)0x5700007C)
-#define rBCDDAY			(*(volatile unsigned char *)0x57000080)
-#define rBCDMON			(*(volatile unsigned char *)0x57000084)
-#define rBCDYEAR		(*(volatile unsigned char *)0x57000088)
-#endif
-
-
-/* ADC */
-#define rADCCON			(*(volatile unsigned *)0x58000000)
-#define rADCTSC			(*(volatile unsigned *)0x58000004)
-#define rADCDLY			(*(volatile unsigned *)0x58000008)
-#define rADCDAT0		(*(volatile unsigned *)0x5800000C)
-#define rADCDAT1		(*(volatile unsigned *)0x58000010)
-
-
-/* SPI */
-#define rSPCON0			(*(volatile unsigned *)0x59000000)
-#define rSPSTA0			(*(volatile unsigned *)0x59000004)
-#define rSPPIN0			(*(volatile unsigned *)0x59000008)
-#define rSPPRE0			(*(volatile unsigned *)0x5900000C)
-#define rSPTDAT0		(*(volatile unsigned *)0x59000010)
-#define rSPRDAT0		(*(volatile unsigned *)0x59000014)
-#define rSPCON1			(*(volatile unsigned *)0x59000020)
-#define rSPSTA1			(*(volatile unsigned *)0x59000024)
-#define rSPPIN1			(*(volatile unsigned *)0x59000028)
-#define rSPPRE1			(*(volatile unsigned *)0x5900002C)
-#define rSPTDAT1		(*(volatile unsigned *)0x59000030)
-#define rSPRDAT1		(*(volatile unsigned *)0x59000034)
-
-
-/* SD INTERFACE */
-#define rSDICON			(*(volatile unsigned *)0x5A000000)
-#define rSDIPRE			(*(volatile unsigned *)0x5A000004)
-#define rSDICmdArg		(*(volatile unsigned *)0x5A000008)
-#define rSDICmdCon		(*(volatile unsigned *)0x5A00000C)
-#define rSDICmdSta		(*(volatile unsigned *)0x5A000010)
-#define rSDIRSP0		(*(volatile unsigned *)0x5A000014)
-#define rSDIRSP1		(*(volatile unsigned *)0x5A000018)
-#define rSDIRSP2		(*(volatile unsigned *)0x5A00001C)
-#define rSDIRSP3		(*(volatile unsigned *)0x5A000020)
-#define rSDIDTimer		(*(volatile unsigned *)0x5A000024)
-#define rSDIBSize		(*(volatile unsigned *)0x5A000028)
-#define rSDIDatCon		(*(volatile unsigned *)0x5A00002C)
-#define rSDIDatCnt		(*(volatile unsigned *)0x5A000030)
-#define rSDIDatSta		(*(volatile unsigned *)0x5A000034)
-#define rSDIFSTA		(*(volatile unsigned *)0x5A000038)
-#ifdef __BIG_ENDIAN
-#define rSDIDAT			(*(volatile unsigned char *)0x5A00003F)
-#else
-#define rSDIDAT			(*(volatile unsigned char *)0x5A00003C)
-#endif
-#define rSDIIntMsk		(*(volatile unsigned *)0x5A000040)
-
-#endif
+};
 
 #endif /*__S3C24X0_H__*/
diff --git a/include/serial.h b/include/serial.h
index 821b58399d..bbda3f08c6 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -43,6 +43,13 @@ extern struct serial_device s3c24xx_serial1_device;
 extern struct serial_device s3c24xx_serial2_device;
 #endif
 
+#if defined(CONFIG_S5PC1XX)
+extern struct serial_device s5pc1xx_serial0_device;
+extern struct serial_device s5pc1xx_serial1_device;
+extern struct serial_device s5pc1xx_serial2_device;
+extern struct serial_device s5pc1xx_serial3_device;
+#endif
+
 #if defined(CONFIG_OMAP3_ZOOM2)
 extern struct serial_device zoom2_serial_device0;
 extern struct serial_device zoom2_serial_device1;
author	Wolfgang Denk <wd@denx.de>	2009-10-24 22:26:09 +0200
committer	Wolfgang Denk <wd@denx.de>	2009-10-24 22:26:09 +0200
commit	922754cc82a82ac90e486b7565a148c9e4b6b584 (patch)
tree	7f42bd45ddc7ba92343446af911a4ac5d71cc874
parent	4ee63268152594bb7af6bec2b59d53bba68082bf (diff)
parent	4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e (diff)