ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0

Sync armada-385-db-88f6820-amc.dts with Linux. Retain the
u-boot,dm-pre-reloc and nand differences.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 82 insertions, 102 deletions

diff --git a/arch/arm/dts/armada-385-db-88f6820-amc.dts b/arch/arm/dts/armada-385-db-88f6820-amc.dts
index c9ccbb57ff..59a425f6b1 100644
--- a/arch/arm/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/dts/armada-385-db-88f6820-amc.dts
@@ -1,51 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
- * Device Tree file for Marvell Armada 385 development board
+ * Device Tree file for Marvell Armada 385 AMC board
  * (DB-88F6820-AMC)
  *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2017 Allied Telesis Labs
  */
 
 /dts-v1/;
 #include "armada-385.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Marvell Armada 385 AMC";
-	compatible = "marvell,a385-amc", "marvell,armada385", "marvell,armada380";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -60,90 +28,88 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
+		reg = <0x00000000 0x80000000>; /* 2GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
 
-		internal-regs {
-			i2c@11000 {
-				clock-frequency = <100000>;
-				u-boot,i2c-slave-addr = <0x0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-			};
-
-			serial@12000 {
-				/*
-				 * Exported on the micro USB connector CON16
-				 * through an FTDI
-				 */
+&i2c0 {
+	u-boot,i2c-slave-addr = <0x0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-				u-boot,dm-pre-reloc;
-			};
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
 
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-			};
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
 
-			usb@58000 {
-				status = "okay";
-			};
 
-			ethernet@70000 {
-				pinctrl-names = "default";
-				/*
-				 * The Reference Clock 0 is used to provide a
-				 * clock to the PHY
-				 */
-				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
 
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
 
-			mdio@72004 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&mdio_pins>;
+&usb0 {
+	status = "okay";
+};
 
-				phy0: ethernet-phy@1 {
-					reg = <1>;
-				};
 
-				phy1: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
 
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-			};
-		};
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
 
-		pcie {
-			status = "okay";
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
 
-		};
+	phy1: ethernet-phy@0 {
+		reg = <0>;
 	};
 };
 
+&nand_controller {
+	status = "okay";
+	marvell,nand-keep-config;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
 &spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
@@ -154,10 +120,24 @@
 		u-boot,dm-pre-reloc;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
+		compatible = "jedec,spi-nor";
 		reg = <0>; /* Chip select 0 */
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
 	};
 };