Merge branch 'master' of git://www.denx.de/git/u-boot-at91

54 files changed, 2496 insertions, 999 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 64a168a746..33821b8707 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -530,6 +530,11 @@ Dave Peverley <dpeverley@mpc-data.co.uk>
 
 	omap730p2		ARM926EJS
 
+Stelian Pop <stelian.pop@leadtechdesign.com>
+
+	at91cap9adk		ARM926EJS (AT91CAP9 SoC)
+	at91sam9260ek		ARM926EJS (AT91SAM9260 SoC)
+
 Stefan Roese <sr@denx.de>
 
 	ixdpg425		xscale
diff --git a/MAKEALL b/MAKEALL
index c781fa506e..2a872acd6a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -452,6 +452,7 @@ LIST_ARM7="		\
 LIST_ARM9="			\
 	at91cap9adk		\
 	at91rm9200dk		\
+	at91sam9260ek		\
 	cmc_pu2			\
 	ap920t			\
 	ap922_XA10		\
@@ -463,6 +464,8 @@ LIST_ARM9="			\
 	cp926ejs		\
 	cp946es			\
 	cp966			\
+	csb637			\
+	kb9202			\
 	lpd7a400		\
 	m501sk			\
 	mp2usb			\
@@ -472,6 +475,7 @@ LIST_ARM9="			\
 	omap1510inn		\
 	omap1610h2		\
 	omap1610inn		\
+	omap5912osk		\
 	omap730p2		\
 	sbc2410x		\
 	scb9328			\
diff --git a/Makefile b/Makefile
index 384d5a3df2..a7f886b489 100644
--- a/Makefile
+++ b/Makefile
@@ -2308,11 +2308,14 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$
 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
 
 at91cap9adk_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9
 
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
+at91sam9260ek_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9
+
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
index 359fdab600..3961030359 100644
--- a/board/atmel/at91cap9adk/Makefile
+++ b/board/atmel/at91cap9adk/Makefile
@@ -25,10 +25,12 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= at91cap9adk.o led.o nand.o
+COBJS-y	+= at91cap9adk.o
+COBJS-y	+= led.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS-y))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 52e62deaed..24861ba49d 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -23,7 +23,13 @@
  */
 
 #include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
@@ -40,126 +46,106 @@ DECLARE_GLOBAL_DATA_PTR;
 static void at91cap9_serial_hw_init(void)
 {
 #ifdef CONFIG_USART0
-	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0;
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0;
+	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
-	AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1;
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1;
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
-	AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2;
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2;
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
-	AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD;
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS;
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
 #endif
-
-
 }
 
 static void at91cap9_nor_hw_init(void)
 {
-	/* Ensure EBI supply is 3.3V */
-	AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3;
+	unsigned long csa;
 
+	/* Ensure EBI supply is 3.3V */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 	/* Configure SMC CS0 for parallel flash */
-	AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP |
-				     AT91C_FLASH_NCS_WR_SETUP |
-				     AT91C_FLASH_NRD_SETUP |
-				     AT91C_FLASH_NCS_RD_SETUP;
-
-	AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE |
-				     AT91C_FLASH_NCS_WR_PULSE |
-				     AT91C_FLASH_NRD_PULSE |
-				     AT91C_FLASH_NCS_RD_PULSE;
-
-	AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE |
-				     AT91C_FLASH_NRD_CYCLE;
-
-	AT91C_BASE_SMC->SMC_CTRL0 =  AT91C_SMC_READMODE |
-				     AT91C_SMC_WRITEMODE |
-				     AT91C_SMC_NWAITM_NWAIT_DISABLE |
-				     AT91C_SMC_BAT_BYTE_WRITE |
-				     AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS |
-				     (AT91C_SMC_TDF & (1 << 16));
+	at91_sys_write(AT91_SMC_SETUP(0),
+		       AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
+		       AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
+	at91_sys_write(AT91_SMC_PULSE(0),
+		       AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
+		       AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
+	at91_sys_write(AT91_SMC_CYCLE(0),
+		       AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+	at91_sys_write(AT91_SMC_MODE(0),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
+		       AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
 }
 
 #ifdef CONFIG_CMD_NAND
 static void at91cap9_nand_hw_init(void)
 {
+	unsigned long csa;
+
 	/* Enable CS3 */
-	AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3;
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
+		       AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
-	AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP |
-				     AT91C_SM_NCS_WR_SETUP |
-				     AT91C_SM_NRD_SETUP |
-				     AT91C_SM_NCS_RD_SETUP;
-
-	AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE |
-				     AT91C_SM_NCS_WR_PULSE |
-				     AT91C_SM_NRD_PULSE |
-				     AT91C_SM_NCS_RD_PULSE;
-
-	AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE |
-				     AT91C_SM_NRD_CYCLE;
-
-	AT91C_BASE_SMC->SMC_CTRL3 =  AT91C_SMC_READMODE |
-				     AT91C_SMC_WRITEMODE |
-				     AT91C_SMC_NWAITM_NWAIT_DISABLE |
-				     AT91C_SMC_DBW_WIDTH_EIGTH_BITS |
-				     AT91C_SM_TDF;
-
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD;
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
+		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
 
 	/* RDY/BSY is not connected */
 
 	/* Enable NandFlash */
-	AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15;
-	AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15;
+	at91_set_gpio_output(AT91_PIN_PD15, 1);
 }
 #endif
 
 #ifdef CONFIG_HAS_DATAFLASH
 static void at91cap9_spi_hw_init(void)
 {
-	AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D |
-				   AT91C_PD1_SPI0_NPCS3D;
-	AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D |
-				   AT91C_PD1_SPI0_NPCS3D;
-
-	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A;
-	AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A |
-				   AT91C_PA1_SPI0_MOSI |
-				   AT91C_PA0_SPI0_MISO |
-				   AT91C_PA3_SPI0_NPCS1 |
-				   AT91C_PA5_SPI0_NPCS0 |
-				   AT91C_PA2_SPI0_SPCK;
-	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A |
-				   AT91C_PA4_SPI0_NPCS2A |
-				   AT91C_PA1_SPI0_MOSI |
-				   AT91C_PA0_SPI0_MISO |
-				   AT91C_PA3_SPI0_NPCS1 |
-				   AT91C_PA5_SPI0_NPCS0 |
-				   AT91C_PA2_SPI0_SPCK;
-
-	/* Enable Clock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0;
+	at91_set_B_periph(AT91_PIN_PA5, 0);	/* SPI0_NPCS0 */
+
+	at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+	at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+	at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void at91cap9_macb_hw_init(void)
 {
-	unsigned int gpio;
-
 	/* Enable clock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC;
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
 
 	/*
 	 * Disable pull-up on:
@@ -169,54 +155,59 @@ static void at91cap9_macb_hw_init(void)
 	 *
 	 * PHY has internal pull-down
 	 */
-	AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV |
-				     AT91C_PB25_E_RX0 |
-				     AT91C_PB26_E_RX1;
+	writel(pin_to_mask(AT91_PIN_PB22) |
+	       pin_to_mask(AT91_PIN_PB25) |
+	       pin_to_mask(AT91_PIN_PB26),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
 
 	/* Need to reset PHY -> 500ms reset */
-	AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
-				    (AT91C_RSTC_ERSTL & (0x0D << 8)) |
-				    AT91C_RSTC_URSTEN;
-	AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
-				    AT91C_RSTC_EXTRST;
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0D << 8) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
 
 	/* Wait for end hardware reset */
-	while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL));
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
 
 	/* Re-enable pull-up */
-	AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV |
-				     AT91C_PB25_E_RX0 |
-				     AT91C_PB26_E_RX1;
-
-#ifdef CONFIG_RMII
-	gpio =	AT91C_PB30_E_MDIO |
-		AT91C_PB29_E_MDC  |
-		AT91C_PB21_E_TXCK |
-		AT91C_PB27_E_RXER |
-		AT91C_PB25_E_RX0  |
-		AT91C_PB22_E_RXDV |
-		AT91C_PB26_E_RX1  |
-		AT91C_PB28_E_TXEN |
-		AT91C_PB23_E_TX0  |
-		AT91C_PB24_E_TX1;
-	AT91C_BASE_PIOB->PIO_ASR = gpio;
-	AT91C_BASE_PIOB->PIO_BSR = 0;
-	AT91C_BASE_PIOB->PIO_PDR = gpio;
-#else
-#error AT91CAP9A-DK works only in RMII mode
+	writel(pin_to_mask(AT91_PIN_PB22) |
+	       pin_to_mask(AT91_PIN_PB25) |
+	       pin_to_mask(AT91_PIN_PB26),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PB30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PB29, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
 #endif
-
 	/* Unlock EMAC, 3 0 2 1 sequence */
 #define MP_MAC_KEY0	0x5969cb2a
 #define MP_MAC_KEY1	0xb4a1872e
 #define MP_MAC_KEY2	0x05683fbc
 #define MP_MAC_KEY3	0x3634fba4
 #define UNLOCK_MAC	0x00000008
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC;
+	writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
+	writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
+	writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
+	writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
+	writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
 }
 #endif
 
@@ -229,11 +220,11 @@ static void at91cap9_uhp_hw_init(void)
 #define MP_OHCI_KEY2	0x4823efbc
 #define MP_OHCI_KEY3	0x8651aae4
 #define UNLOCK_OHCI	0x00000010
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1;
-	*((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI;
+	writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
+	writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
+	writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
+	writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
+	writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
 }
 #endif
 
diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c
index 8588a91a13..04de139204 100644
--- a/board/atmel/at91cap9adk/led.c
+++ b/board/atmel/at91cap9adk/led.c
@@ -23,58 +23,55 @@
  */
 
 #include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
 
-#define	RED_LED		AT91C_PIO_PC29	/* this is the power led */
-#define	GREEN_LED	AT91C_PIO_PA10	/* this is the user1 led */
-#define	YELLOW_LED	AT91C_PIO_PA11	/* this is the user1 led */
+#define	RED_LED		AT91_PIN_PC29	/* this is the power led */
+#define	GREEN_LED	AT91_PIN_PA10	/* this is the user1 led */
+#define	YELLOW_LED	AT91_PIN_PA11	/* this is the user1 led */
 
 void red_LED_on(void)
 {
-	AT91C_BASE_PIOC->PIO_SODR = RED_LED;
+	at91_set_gpio_value(RED_LED, 1);
 }
 
 void red_LED_off(void)
 {
-	AT91C_BASE_PIOC->PIO_CODR = RED_LED;
+	at91_set_gpio_value(RED_LED, 0);
 }
 
 void green_LED_on(void)
 {
-	AT91C_BASE_PIOA->PIO_CODR = GREEN_LED;
+	at91_set_gpio_value(GREEN_LED, 0);
 }
 
 void green_LED_off(void)
 {
-	AT91C_BASE_PIOA->PIO_SODR = GREEN_LED;
+	at91_set_gpio_value(GREEN_LED, 1);
 }
 
 void yellow_LED_on(void)
 {
-	AT91C_BASE_PIOA->PIO_CODR = YELLOW_LED;
+	at91_set_gpio_value(YELLOW_LED, 0);
 }
 
 void yellow_LED_off(void)
 {
-	AT91C_BASE_PIOA->PIO_SODR = YELLOW_LED;
+	at91_set_gpio_value(YELLOW_LED, 1);
 }
 
 void coloured_LED_init(void)
 {
 	/* Enable clock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD;
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
 
-	/* Disable peripherals on LEDs */
-	AT91C_BASE_PIOA->PIO_PER = GREEN_LED | YELLOW_LED;
-	/* Enable pins as outputs */
-	AT91C_BASE_PIOA->PIO_OER = GREEN_LED | YELLOW_LED;
-	/* Turn all LEDs OFF */
-	AT91C_BASE_PIOA->PIO_SODR = GREEN_LED | YELLOW_LED;
+	at91_set_gpio_output(RED_LED, 1);
+	at91_set_gpio_output(GREEN_LED, 1);
+	at91_set_gpio_output(YELLOW_LED, 1);
 
-	/* Disable peripherals on LEDs */
-	AT91C_BASE_PIOC->PIO_PER = RED_LED;
-	/* Enable pins as outputs */
-	AT91C_BASE_PIOC->PIO_OER = RED_LED;
-	/* Turn all LEDs OFF */
-	AT91C_BASE_PIOC->PIO_CODR = RED_LED;
+	at91_set_gpio_output(RED_LED, 0);
+	at91_set_gpio_output(GREEN_LED, 1);
+	at91_set_gpio_output(YELLOW_LED, 1);
 }
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 2f02126278..c72b0244bd 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -25,9 +25,9 @@
  */
 
 #include <common.h>
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_CMD_NAND
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
 
 #include <nand.h>
 
@@ -51,10 +51,10 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 		IO_ADDR_W |= MASK_ALE;
 		break;
 	case NAND_CTL_CLRNCE:
-		AT91C_BASE_PIOD->PIO_SODR = AT91C_PIO_PD15;
+		at91_set_gpio_value(AT91_PIN_PD15, 1);
 		break;
 	case NAND_CTL_SETNCE:
-		AT91C_BASE_PIOD->PIO_CODR = AT91C_PIO_PD15;
+		at91_set_gpio_value(AT91_PIN_PD15, 0);
 		break;
 	}
 	this->IO_ADDR_W = (void *) IO_ADDR_W;
@@ -68,4 +68,3 @@ int board_nand_init(struct nand_chip *nand)
 
 	return 0;
 }
-#endif
diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile
new file mode 100644
index 0000000000..8a629b9c8f
--- /dev/null
+++ b/board/atmel/at91sam9260ek/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= at91sam9260ek.o
+COBJS-y	+= led.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
new file mode 100644
index 0000000000..a55468e30d
--- /dev/null
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9260ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9260ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_DBW_8 | AT91_SMC_TDF_(2));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PC13, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PC14, 1);
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9260ek_spi_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA3, 0);	/* SPI0_NPCS0 */
+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* SPI0_NPCS1 */
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9260ek_macb_hw_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
+	 * 	ERX0 (PA14) => PHY ADDR0
+	 *	ERX1 (PA15) => PHY ADDR1
+	 *	ERX2 (PA25) => PHY ADDR2
+	 *	ERX3 (PA26) => PHY ADDR3
+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0D << 8) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0 << 8) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
+#endif
+
+}
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9260EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91sam9260ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9260ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91sam9260ek_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+	at91sam9260ek_macb_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
diff --git a/board/atmel/at91sam9260ek/config.mk b/board/atmel/at91sam9260ek/config.mk
new file mode 100644
index 0000000000..ff2cfd170b
--- /dev/null
+++ b/board/atmel/at91sam9260ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c
new file mode 100644
index 0000000000..4c53742e50
--- /dev/null
+++ b/board/atmel/at91sam9260ek/led.c
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define	RED_LED		AT91_PIN_PA9	/* this is the power led */
+#define	GREEN_LED	AT91_PIN_PA6	/* this is the user led */
+
+void red_LED_on(void)
+{
+	at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+	at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+	at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+	at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
+
+	at91_set_gpio_output(RED_LED, 1);
+	at91_set_gpio_output(GREEN_LED, 1);
+
+	at91_set_gpio_value(RED_LED, 0);
+	at91_set_gpio_value(GREEN_LED, 1);
+}
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
new file mode 100644
index 0000000000..abb788afe7
--- /dev/null
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
+#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
+
+static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+	switch (cmd) {
+	case NAND_CTL_SETCLE:
+		IO_ADDR_W |= MASK_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		IO_ADDR_W |= MASK_ALE;
+		break;
+	case NAND_CTL_CLRNCE:
+		at91_set_gpio_value(AT91_PIN_PC14, 1);
+		break;
+	case NAND_CTL_SETNCE:
+		at91_set_gpio_value(AT91_PIN_PC14, 0);
+		break;
+	}
+	this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
+{
+	return at91_get_gpio_value(AT91_PIN_PC13);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->hwcontrol = at91sam9260ek_nand_hwcontrol;
+	nand->dev_ready = at91sam9260ek_nand_ready;
+	nand->chip_delay = 20;
+
+	return 0;
+}
diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds
new file mode 100644
index 0000000000..05a6d83d56
--- /dev/null
+++ b/board/atmel/at91sam9260ek/u-boot.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+	  cpu/arm926ejs/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S
index 9e174b5b8f..6aea723f91 100644
--- a/board/m501sk/memsetup.S
+++ b/board/m501sk/memsetup.S
@@ -52,8 +52,8 @@
 #define MC_AASR_VAL 0x00000000
 #define EBI_CFGR 0xFFFFFF64
 #define EBI_CFGR_VAL 0x00000000
-#define SMC2_CSR 0xFFFFFF70
-#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0 0xFFFFFF70
+#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR 0xFFFFFC28
@@ -141,8 +141,8 @@ SMRDATA:
 	.word MC_AASR_VAL
 	.word EBI_CFGR
 	.word EBI_CFGR_VAL
-	.word SMC2_CSR
-	.word SMC2_CSR_VAL
+	.word SMC_CSR0
+	.word SMC_CSR0_VAL
 	.word PLLAR
 	.word PLLAR_VAL
 	.word PLLBR
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index f56443e25e..db5dec9049 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -41,6 +41,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
 		u8 *part_num, struct part_info **part);
 #endif
 
+#ifndef CFG_NO_FLASH
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
 /*
@@ -275,15 +276,19 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
 
 	return rcode;
 }
+#endif /* CFG_NO_FLASH */
 
 int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
+#ifndef CFG_NO_FLASH
 	ulong bank;
+#endif
 
 #ifdef CONFIG_HAS_DATAFLASH
 	dataflash_print_info();
 #endif
 
+#ifndef CFG_NO_FLASH
 	if (argc == 1) {	/* print info for all FLASH banks */
 		for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) {
 			printf ("\nBank # %ld: ", bank+1);
@@ -301,11 +306,13 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 	printf ("\nBank # %ld: ", bank);
 	flash_print_info (&flash_info[bank-1]);
+#endif /* CFG_NO_FLASH */
 	return 0;
 }
 
 int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
+#ifndef CFG_NO_FLASH
 	flash_info_t *info;
 	ulong bank, addr_first, addr_last;
 	int n, sect_first, sect_last;
@@ -397,8 +404,12 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	rcode = flash_sect_erase(addr_first, addr_last);
 	return rcode;
+#else
+	return 0;
+#endif /* CFG_NO_FLASH */
 }
 
+#ifndef CFG_NO_FLASH
 int flash_sect_erase (ulong addr_first, ulong addr_last)
 {
 	flash_info_t *info;
@@ -439,12 +450,17 @@ int flash_sect_erase (ulong addr_first, ulong addr_last)
 	}
 	return rcode;
 }
+#endif /* CFG_NO_FLASH */
 
 int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
+#ifndef CFG_NO_FLASH
 	flash_info_t *info;
-	ulong bank, addr_first, addr_last;
-	int i, p, n, sect_first, sect_last;
+	ulong bank;
+	int i, n, sect_first, sect_last;
+#endif /* CFG_NO_FLASH */
+	ulong addr_first, addr_last;
+	int p;
 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 	struct mtd_device *dev;
 	struct part_info *part;
@@ -487,6 +503,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
+#ifndef CFG_NO_FLASH
 	if (strcmp(argv[2], "all") == 0) {
 		for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
 			info = &flash_info[bank-1];
@@ -611,10 +628,11 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 	rcode = flash_sect_protect (p, addr_first, addr_last);
+#endif /* CFG_NO_FLASH */
 	return rcode;
 }
 
-
+#ifndef CFG_NO_FLASH
 int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 {
 	flash_info_t *info;
@@ -667,6 +685,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 	}
 	return rcode;
 }
+#endif /* CFG_NO_FLASH */
 
 
 /**************************************************/
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 4262e26a61..d6d7a5b77f 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -492,7 +492,11 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* Check if we are copying from DataFlash to RAM */
-	if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
+	if (addr_dataflash(addr) && !addr_dataflash(dest)
+#ifndef CFG_NO_FLASH
+				 && (addr2info(dest) == NULL)
+#endif
+	   ){
 		int rc;
 		rc = read_dataflash(addr, count * size, (char *) dest);
 		if (rc != 1) {
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 1902bd02c5..98363eb400 100644
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -46,7 +46,7 @@
 #define MC_ASR		0xFFFFFF04
 #define MC_AASR		0xFFFFFF08
 #define EBI_CFGR	0xFFFFFF64
-#define SMC2_CSR	0xFFFFFF70
+#define SMC_CSR0	0xFFFFFF70
 
 /* clocks */
 #define PLLAR		0xFFFFFC28
@@ -146,8 +146,8 @@ SMRDATA:
 	.word MC_AASR_VAL
 	.word EBI_CFGR
 	.word EBI_CFGR_VAL
-	.word SMC2_CSR
-	.word SMC2_CSR_VAL
+	.word SMC_CSR0
+	.word SMC_CSR0_VAL
 	.word PLLAR
 	.word PLLAR_VAL
 	.word PLLBR
diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91cap9/spi.c
deleted file mode 100644
index 0953820bdf..0000000000
--- a/cpu/arm926ejs/at91cap9/spi.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-/* Max Value = 10MHz to be compliant to the Continuous Array Read function */
-#define AT91C_SPI_CLK	10000000
-
-/* AC Characteristics: DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS	(0xFA << 16)
-#define DATAFLASH_TCHS	(0x8 << 24)
-
-#define AT91C_TIMEOUT_WRDY		200000
-#define AT91C_SPI_PCS0_DATAFLASH_CARD	0xE	/* Chip Select 0: NPCS0%1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
-
-void AT91F_SpiInit(void)
-{
-	/* Reset the SPI */
-	AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SWRST;
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	AT91C_BASE_SPI0->SPI_MR =
-		AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
-	/* Configure CS0 */
-	AT91C_BASE_SPI0->SPI_CSR[0] =
-		AT91C_SPI_CPOL |
-		(AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
-		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
-		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-}
-
-void AT91F_SpiEnable(int cs)
-{
-	switch (cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI0->SPI_MR |=
-			((AT91C_SPI_PCS0_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	case 3:
-		AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI0->SPI_MR |=
-			((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	}
-
-	/* SPI_Enable */
-	AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SPIEN;
-}
-
-unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
-{
-	unsigned int timeout;
-
-	pDesc->state = BUSY;
-
-	AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
-	/* Initialize the Transmit and Receive Pointer */
-	AT91C_BASE_SPI0->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt;
-	AT91C_BASE_SPI0->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt;
-
-	/* Intialize the Transmit and Receive Counters */
-	AT91C_BASE_SPI0->SPI_RCR = pDesc->rx_cmd_size;
-	AT91C_BASE_SPI0->SPI_TCR = pDesc->tx_cmd_size;
-
-	if (pDesc->tx_data_size != 0) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		AT91C_BASE_SPI0->SPI_RNPR = (unsigned int)pDesc->rx_data_pt;
-		AT91C_BASE_SPI0->SPI_TNPR = (unsigned int)pDesc->tx_data_pt;
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		AT91C_BASE_SPI0->SPI_RNCR = pDesc->rx_data_size;
-		AT91C_BASE_SPI0->SPI_TNCR = pDesc->tx_data_size;
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-	timeout = 0;
-
-	AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
-	while (!(AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT));
-	AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-	pDesc->state = IDLE;
-
-	if (timeout >= CFG_SPI_WRITE_TOUT) {
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}
-#endif
diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile
index bf15e1edb3..203abc28e1 100644
--- a/cpu/arm926ejs/at91cap9/Makefile
+++ b/cpu/arm926ejs/at91sam9/Makefile
@@ -25,11 +25,14 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= ether.o timer.o spi.o usb.o
+COBJS-y	+= ether.o
+COBJS-y	+= timer.o
+COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
+COBJS-y	+= usb.o
 SOBJS	= lowlevel_init.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 
 all:	$(obj).depend $(LIB)
 
diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk
index ca2cae181b..ca2cae181b 100644
--- a/cpu/arm926ejs/at91cap9/config.mk
+++ b/cpu/arm926ejs/at91sam9/config.mk
diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c
index b7958d5aba..e4f56012aa 100644
--- a/cpu/arm926ejs/at91cap9/ether.c
+++ b/cpu/arm926ejs/at91sam9/ether.c
@@ -23,13 +23,13 @@
  */
 
 #include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/hardware.h>
 
 extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void at91cap9_eth_initialize(bd_t *bi)
+void at91sam9_eth_initialize(bd_t *bi)
 {
-	macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00);
+	macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
 }
 #endif
diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S
index 24d950cf74..40a3f6aaef 100644
--- a/cpu/arm926ejs/at91cap9/lowlevel_init.S
+++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * AT91CAP9 setup stuff
+ * AT91CAP9/SAM9 setup stuff
  *
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian.pop <at> leadtechdesign.com>
diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c
new file mode 100644
index 0000000000..c9fe6d8a3f
--- /dev/null
+++ b/cpu/arm926ejs/at91sam9/spi.c
@@ -0,0 +1,157 @@
+/*
+ * Driver for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_spi.h>
+
+#include <dataflash.h>
+
+#define AT91_SPI_PCS0_DATAFLASH_CARD	0xE	/* Chip Select 0: NPCS0%1110 */
+#define AT91_SPI_PCS1_DATAFLASH_CARD	0xD	/* Chip Select 0: NPCS0%1101 */
+#define AT91_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
+
+void AT91F_SpiInit(void)
+{
+	/* Reset the SPI */
+	writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
+
+	/* Configure SPI in Master Mode with No CS selected !!! */
+	writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
+	       AT91_BASE_SPI + AT91_SPI_MR);
+
+	/* Configure CS0 */
+	writel(AT91_SPI_NCPHA |
+	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
+	       AT91_BASE_SPI + AT91_SPI_CSR(0));
+
+#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1
+	/* Configure CS1 */
+	writel(AT91_SPI_NCPHA |
+	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
+	       AT91_BASE_SPI + AT91_SPI_CSR(1));
+#endif
+
+#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3
+	/* Configure CS3 */
+	writel(AT91_SPI_NCPHA |
+	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+	       (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
+	       AT91_BASE_SPI + AT91_SPI_CSR(3));
+#endif
+
+	/* SPI_Enable */
+	writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
+
+	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS));
+
+	/*
+	 * Add tempo to get SPI in a safe state.
+	 * Should not be needed for new silicon (Rev B)
+	 */
+	udelay(500000);
+	readl(AT91_BASE_SPI + AT91_SPI_SR);
+	readl(AT91_BASE_SPI + AT91_SPI_RDR);
+
+}
+
+void AT91F_SpiEnable(int cs)
+{
+	unsigned long mode;
+
+	switch (cs) {
+	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
+		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+		mode &= 0xFFF0FFFF;
+		writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
+		       AT91_BASE_SPI + AT91_SPI_MR);
+		break;
+	case 1:	/* Configure SPI CS1 for Serial DataFlash AT45DBxx */
+		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+		mode &= 0xFFF0FFFF;
+		writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
+		       AT91_BASE_SPI + AT91_SPI_MR);
+		break;
+	case 3:
+		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+		mode &= 0xFFF0FFFF;
+		writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
+		       AT91_BASE_SPI + AT91_SPI_MR);
+		break;
+	}
+
+	/* SPI_Enable */
+	writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
+}
+
+unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
+
+unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
+{
+	unsigned int timeout;
+
+	pDesc->state = BUSY;
+
+	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
+
+	/* Initialize the Transmit and Receive Pointer */
+	writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
+	writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
+
+	/* Intialize the Transmit and Receive Counters */
+	writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR);
+	writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR);
+
+	if (pDesc->tx_data_size != 0) {
+		/* Initialize the Next Transmit and Next Receive Pointer */
+		writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR);
+		writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR);
+
+		/* Intialize the Next Transmit and Next Receive Counters */
+		writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR);
+		writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR);
+	}
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+	timeout = 0;
+
+	writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
+	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
+		((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT));
+	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
+	pDesc->state = IDLE;
+
+	if (timeout >= CFG_SPI_WRITE_TOUT) {
+		printf("Error Timeout\n\r");
+		return DATAFLASH_ERROR;
+	}
+
+	return DATAFLASH_OK;
+}
diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c
index 4110e15b5c..4e79466286 100644
--- a/cpu/arm926ejs/at91cap9/timer.c
+++ b/cpu/arm926ejs/at91sam9/timer.c
@@ -24,36 +24,35 @@
 
 #include <common.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/io.h>
 
 /*
- * We're using the AT91CAP9 PITC in 32 bit mode, by
+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
  * setting the 20 bit counter period to its maximum (0xfffff).
  */
 #define TIMER_LOAD_VAL	0xfffff
-#define READ_RESET_TIMER (AT91C_BASE_PITC->PITC_PIVR)
-#define READ_TIMER (AT91C_BASE_PITC->PITC_PIIR)
+#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR)
+#define READ_TIMER at91_sys_read(AT91_PIT_PIIR)
 #define TIMER_FREQ (AT91C_MASTER_CLOCK << 4)
 #define TICKS_TO_USEC(ticks) ((ticks) / 6)
 
 ulong get_timer_masked(void);
 ulong resettime;
 
-AT91PS_PITC p_pitc;
-
 /* nothing really to do with interrupts, just starts up a counter. */
-int interrupt_init(void)
+int timer_init(void)
 {
 	/*
 	 * Enable PITC Clock
 	 * The clock is already enabled for system controller in boot
 	 */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS;
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
 
 	/* Enable PITC */
-	AT91C_BASE_PITC->PITC_PIMR = AT91C_PITC_PITEN;
-
-	/* Load PITC_PIMR with the right timer value */
-	AT91C_BASE_PITC->PITC_PIMR |= TIMER_LOAD_VAL;
+	at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN);
 
 	reset_timer_masked();
 
@@ -67,6 +66,7 @@ int interrupt_init(void)
 static inline ulong get_timer_raw(void)
 {
 	ulong now = READ_TIMER;
+
 	if (now >= resettime)
 		return now - resettime;
 	else
@@ -129,20 +129,20 @@ unsigned long long get_ticks(void)
 ulong get_tbclk(void)
 {
 	ulong tbclk;
+
 	tbclk = CFG_HZ;
 	return tbclk;
 }
 
 /*
- * Reset the cpu by setting up the watchdog timer and let him time out
- * on the AT91CAP9ADK board
+ * Reset the cpu by setting up the watchdog timer and let him time out.
  */
 void reset_cpu(ulong ignored)
 {
 	/* this is the way Linux does it */
-	AT91C_BASE_RSTC->RSTC_RCR = (0xA5 << 24) |
-				    AT91C_RSTC_PROCRST |
-				    AT91C_RSTC_PERRST;
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY |
+				     AT91_RSTC_PROCRST |
+				     AT91_RSTC_PERRST);
 
 	while (1);
 	/* Never reached */
diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c
index 69da5f3a92..d678897dc7 100644
--- a/cpu/arm926ejs/at91cap9/usb.c
+++ b/cpu/arm926ejs/at91sam9/usb.c
@@ -24,15 +24,16 @@
 #include <common.h>
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
-#ifdef CONFIG_AT91CAP9
 
 #include <asm/arch/hardware.h>
+#include <asm/arch/io.h>
+#include <asm/arch/at91_pmc.h>
 
 int usb_cpu_init(void)
 {
 	/* Enable USB host clock. */
-	AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UHP;
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_UHP;
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+	at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
 
 	return 0;
 }
@@ -40,8 +41,8 @@ int usb_cpu_init(void)
 int usb_cpu_stop(void)
 {
 	/* Disable USB host clock. */
-	AT91C_BASE_PMC->PMC_PCDR = 1 << AT91C_ID_UHP;
-	AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_UHP;
+	at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
 	return 0;
 }
 
@@ -50,5 +51,4 @@ int usb_cpu_init_fail(void)
 	return usb_cpu_stop();
 }
 
-#endif /* CONFIG_AT91CAP9 */
 #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c
index 0971fea814..1819f6b078 100644
--- a/cpu/arm926ejs/interrupts.c
+++ b/cpu/arm926ejs/interrupts.c
@@ -38,7 +38,7 @@
 #include <common.h>
 #include <arm926ejs.h>
 
-#if defined(CONFIG_INTEGRATOR) || defined(CONFIG_AT91CAP9ADK)
+#ifdef CONFIG_INTEGRATOR
 
 	/* Timer functionality supplied by Integrator board (AP or CP) */
 
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 952e919843..ff932a1b6b 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -23,17 +23,17 @@
 
 include $(TOPDIR)/config.mk
 
-LIB 	:= $(obj)libmtd.a
+LIB	:= $(obj)libmtd.a
 
 COBJS-y += at45.o
 COBJS-y += cfi_flash.o
-COBJS-y += dataflash.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
 COBJS-y += mw_eeprom.o
 COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
 
 COBJS	:= $(COBJS-y)
-SRCS 	:= $(COBJS:.o=.c)
-OBJS 	:= $(addprefix $(obj),$(COBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
 all:	$(LIB)
 
diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c
index 36c99a0499..d8f78f20a8 100644
--- a/drivers/mtd/dataflash.c
+++ b/drivers/mtd/dataflash.c
@@ -19,7 +19,6 @@
  */
 #include <common.h>
 #include <config.h>
-#ifdef CONFIG_HAS_DATAFLASH
 #include <asm/hardware.h>
 #include <dataflash.h>
 
@@ -31,7 +30,7 @@ struct dataflash_addr {
 	int cs;
 };
 
-#ifdef CONFIG_AT91SAM9260EK
+#if defined(CONFIG_AT91SAM9260EK)
 struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
 	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 	{CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
@@ -48,51 +47,13 @@ struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
 #endif
 
 /*define the area offsets*/
-#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || \
-	defined(CONFIG_AT91SAM9263EK) || defined(CONFIG_AT91CAP9ADK)
-#if	defined(CONFIG_NEW_PARTITION)
 dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000,	0x00003FFF, 	FLAG_PROTECT_SET,	0,    		"Bootstrap"},  	/* ROM code */
-	{0x00004200,	0x000083FF, 	FLAG_PROTECT_CLEAR,	0,    		"Environment"},	/* u-boot environment */
-	{0x00008400,	0x0003DDFF,	FLAG_PROTECT_SET,	0,    		"U-Boot"},     	/* u-boot code */
-	{0x0003DE00,	0x00041FFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"MON"},	       	/* Room for alternative boot monitor */
-	{0x00042000,	0x0018BFFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"OS"},	       	/* data area size to tune */
-	{0x0018C000,	0xFFFFFFFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"FS"},	       	/* data area size to tune */
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x0003DDFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x0003DE00, 0x0023DE3F, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x0023DE40, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
 };
-#else
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0, 0x3fff, FLAG_PROTECT_SET},			/* ROM code */
-	{0x4000, 0x7fff, FLAG_PROTECT_CLEAR},		/* u-boot environment */
-	{0x8000, 0x37fff, FLAG_PROTECT_SET},		/* u-boot code */
-	{0x38000, 0x1fffff, FLAG_PROTECT_CLEAR},	/* data area size to tune */
-};
-#endif
-#elif defined(CONFIG_NEW_PARTITION)
-/*define the area offsets*/
-/* Invalid partitions should be defined with start > end */
-dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = {
-	{0x00000000, 0x000083ff, FLAG_PROTECT_SET,	0,		"Bootstrap"},	/* ROM code */
-	{0x00008400, 0x00020fff, FLAG_PROTECT_SET,	0,		"U-Boot"},	/* u-boot code */
-	{0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR,	0,		"Environment"},	/* u-boot environment 8Kb */
-	{0x00029400, 0x00041fff, FLAG_PROTECT_INVALID,	0,		"<Unused>"},	/* Rest of Sector 1 */
-	{0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"OS"},	/* data area size to tune */
-	{0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"FS"},	/* data area size to tune */
-
-	{0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"Data"},	/* data area */
-	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
-	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
-	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
-	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
-	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
-};
-#else
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0, 0x7fff, FLAG_PROTECT_SET},			/* ROM code */
-	{0x8000, 0x1ffff, FLAG_PROTECT_SET},		/* u-boot code */
-	{0x20000, 0x27fff, FLAG_PROTECT_CLEAR},		/* u-boot environment */
-	{0x28000, 0x1fffff, FLAG_PROTECT_CLEAR},	/* data area size to tune */
-};
-#endif
 
 extern void AT91F_SpiInit (void);
 extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc);
@@ -108,7 +69,7 @@ int AT91F_DataflashInit (void)
 {
 	int i, j;
 	int dfcode;
-	int part = 0;
+	int part;
 	int last_part;
 	int found[CFG_MAX_DATAFLASH_BANKS];
 	unsigned char protected;
@@ -181,7 +142,8 @@ int AT91F_DataflashInit (void)
 				(dataflash_info[i].Device.pages_number *
 				dataflash_info[i].Device.pages_size)-1;
 
-		last_part=0;
+		part = 0;
+		last_part = 0;
 		/* set the area addresses */
 		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
 			if(found[i]!=0) {
@@ -224,6 +186,7 @@ int AT91F_DataflashSetEnv (void)
 	unsigned char env;
 	unsigned char s[32];	/* Will fit a long int in hex */
 	unsigned long start;
+
 	for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
 		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
 			env = area_list[part].setenv;
@@ -297,9 +260,8 @@ void dataflash_print_info (void)
 	}
 }
 
-
 /*---------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataflashSelect 				     */
+/* Function Name       : AT91F_DataflashSelect				     */
 /* Object              : Select the correct device			     */
 /*---------------------------------------------------------------------------*/
 AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
@@ -326,7 +288,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
 }
 
 /*---------------------------------------------------------------------------*/
-/* Function Name       : addr_dataflash 		    		     */
+/* Function Name       : addr_dataflash					     */
 /* Object              : Test if address is valid			     */
 /*---------------------------------------------------------------------------*/
 int addr_dataflash (unsigned long addr)
@@ -344,8 +306,9 @@ int addr_dataflash (unsigned long addr)
 
 	return addr_valid;
 }
+
 /*---------------------------------------------------------------------------*/
-/* Function Name       : size_dataflash 				     */
+/* Function Name       : size_dataflash					     */
 /* Object              : Test if address is valid regarding the size	     */
 /*---------------------------------------------------------------------------*/
 int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr,
@@ -361,13 +324,15 @@ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr,
 
 	return 1;
 }
+
 /*---------------------------------------------------------------------------*/
-/* Function Name       : prot_dataflash 				     */
+/* Function Name       : prot_dataflash					     */
 /* Object              : Test if destination area is protected		     */
 /*---------------------------------------------------------------------------*/
 int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr)
 {
-int area;
+	int area;
+
 	/* find area */
 	for (area=0; area < NB_DATAFLASH_AREA; area++) {
 		if ((addr >= pdataFlash->pDevice->area_list[area].start) &&
@@ -385,6 +350,7 @@ int area;
 
 	return 1;
 }
+
 /*--------------------------------------------------------------------------*/
 /* Function Name       : dataflash_real_protect				    */
 /* Object              : protect/unprotect area				    */
@@ -392,7 +358,8 @@ int area;
 int dataflash_real_protect (int flag, unsigned long start_addr,
 				unsigned long end_addr)
 {
-int i,j, area1, area2, addr_valid = 0;
+	int i,j, area1, area2, addr_valid = 0;
+
 	/* find dataflash */
 	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
 		if ((((int) start_addr) & 0xF0000000) ==
@@ -435,7 +402,7 @@ int i,j, area1, area2, addr_valid = 0;
 }
 
 /*---------------------------------------------------------------------------*/
-/* Function Name       : read_dataflash 				     */
+/* Function Name       : read_dataflash					     */
 /* Object              : dataflash memory read				     */
 /*---------------------------------------------------------------------------*/
 int read_dataflash (unsigned long addr, unsigned long size, char *result)
@@ -454,9 +421,8 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result)
 	return (AT91F_DataFlashRead (pFlash, AddrToRead, size, result));
 }
 
-
 /*---------------------------------------------------------------------------*/
-/* Function Name       : write_dataflash 				     */
+/* Function Name       : write_dataflash				     */
 /* Object              : write a block in dataflash			     */
 /*---------------------------------------------------------------------------*/
 int write_dataflash (unsigned long addr_dest, unsigned long addr_src,
@@ -483,7 +449,6 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src,
 						AddrToWrite, size);
 }
 
-
 void dataflash_perror (int err)
 {
 	switch (err) {
@@ -509,5 +474,3 @@ void dataflash_perror (int err)
 		break;
 	}
 }
-
-#endif
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 9c98338f74..703784ee0d 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -417,13 +417,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
-#ifdef CONFIG_AT91CAP9ADK
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
-#ifdef CONFIG_AT91CAP9ADK
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/include/asm-arm/arch-at91cap9/AT91CAP9.h b/include/asm-arm/arch-at91cap9/AT91CAP9.h
deleted file mode 100644
index 02ef9a8592..0000000000
--- a/include/asm-arm/arch-at91cap9/AT91CAP9.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/*
- * (C) Copyright 2008
- * AT91CAP9 definitions
- * Author : ATMEL AT91 application group
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-typedef volatile unsigned int AT91_REG;
-
-/* Static Memory Controller */
-typedef struct _AT91S_SMC {
-	AT91_REG	SMC_SETUP0;	/* Setup Register for CS 0 */
-	AT91_REG	SMC_PULSE0;	/* Pulse Register for CS 0 */
-	AT91_REG	SMC_CYCLE0;	/* Cycle Register for CS 0 */
-	AT91_REG	SMC_CTRL0;	/* Control Register for CS 0 */
-	AT91_REG	SMC_SETUP1;	/* Setup Register for CS 1 */
-	AT91_REG	SMC_PULSE1;	/* Pulse Register for CS 1 */
-	AT91_REG	SMC_CYCLE1;	/* Cycle Register for CS 1 */
-	AT91_REG	SMC_CTRL1;	/* Control Register for CS 1 */
-	AT91_REG	SMC_SETUP2;	/* Setup Register for CS 2 */
-	AT91_REG	SMC_PULSE2;	/* Pulse Register for CS 2 */
-	AT91_REG	SMC_CYCLE2;	/* Cycle Register for CS 2 */
-	AT91_REG	SMC_CTRL2;	/* Control Register for CS 2 */
-	AT91_REG	SMC_SETUP3;	/* Setup Register for CS 3 */
-	AT91_REG	SMC_PULSE3;	/* Pulse Register for CS 3 */
-	AT91_REG	SMC_CYCLE3;	/* Cycle Register for CS 3 */
-	AT91_REG	SMC_CTRL3;	/* Control Register for CS 3 */
-	AT91_REG	SMC_SETUP4;	/* Setup Register for CS 4 */
-	AT91_REG	SMC_PULSE4;	/* Pulse Register for CS 4 */
-	AT91_REG	SMC_CYCLE4;	/* Cycle Register for CS 4 */
-	AT91_REG	SMC_CTRL4;	/* Control Register for CS 4 */
-	AT91_REG	SMC_SETUP5;	/* Setup Register for CS 5 */
-	AT91_REG	SMC_PULSE5;	/* Pulse Register for CS 5 */
-	AT91_REG	SMC_CYCLE5;	/* Cycle Register for CS 5 */
-	AT91_REG	SMC_CTRL5;	/* Control Register for CS 5 */
-	AT91_REG	SMC_SETUP6;	/* Setup Register for CS 6 */
-	AT91_REG	SMC_PULSE6;	/* Pulse Register for CS 6 */
-	AT91_REG	SMC_CYCLE6;	/* Cycle Register for CS 6 */
-	AT91_REG	SMC_CTRL6;	/* Control Register for CS 6 */
-	AT91_REG	SMC_SETUP7;	/* Setup Register for CS 7 */
-	AT91_REG	SMC_PULSE7;	/* Pulse Register for CS 7 */
-	AT91_REG	SMC_CYCLE7;	/* Cycle Register for CS 7 */
-	AT91_REG	SMC_CTRL7;	/* Control Register for CS 7 */
-} AT91S_SMC, *AT91PS_SMC;
-
-/* SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x */
-#define AT91C_SMC_NWESETUP	(0x3F <<  0)	/* NWE Setup Length */
-#define AT91C_SMC_NCSSETUPWR	(0x3F <<  8)	/* NCS Setup Length for WRite */
-#define AT91C_SMC_NRDSETUP	(0x3F << 16)	/* NRD Setup Length */
-#define AT91C_SMC_NCSSETUPRD	(0x3F << 24)	/* NCS Setup Length for ReaD */
-/* SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x */
-#define AT91C_SMC_NWEPULSE	(0x7F <<  0)	/* NWE Pulse Length */
-#define AT91C_SMC_NCSPULSEWR	(0x7F <<  8)	/* NCS Pulse Length for WRite */
-#define AT91C_SMC_NRDPULSE	(0x7F << 16)	/* NRD Pulse Length */
-#define AT91C_SMC_NCSPULSERD	(0x7F << 24)	/* NCS Pulse Length for ReaD */
-/* SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x */
-#define AT91C_SMC_NWECYCLE	(0x1FF <<  0)	/* Total Write Cycle Length */
-#define AT91C_SMC_NRDCYCLE	(0x1FF << 16)	/* Total Read Cycle Length */
-/* SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x */
-#define AT91C_SMC_READMODE	(0x1 <<  0)	/* Read Mode */
-#define AT91C_SMC_WRITEMODE	(0x1 <<  1)	/* Write Mode */
-#define AT91C_SMC_NWAITM	(0x3 <<  5)	/* NWAIT Mode */
-		/* External NWAIT disabled */
-#define		AT91C_SMC_NWAITM_NWAIT_DISABLE		(0x0 <<  5)
-		/* External NWAIT enabled in frozen mode */
-#define		AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN	(0x2 <<  5)
-		/* External NWAIT enabled in ready mode */
-#define		AT91C_SMC_NWAITM_NWAIT_ENABLE_READY	(0x3 <<  5)
-#define AT91C_SMC_BAT		(0x1 <<  8)	/* Byte Access Type */
-		/*
-		 * Write controled by ncs, nbs0, nbs1, nbs2, nbs3.
-		 * Read controled by ncs, nrd, nbs0, nbs1, nbs2, nbs3.
-		 */
-#define		AT91C_SMC_BAT_BYTE_SELECT		(0x0 <<  8)
-		/*
-		 * Write controled by ncs, nwe0, nwe1, nwe2, nwe3.
-		 * Read controled by ncs and nrd.
-		 */
-#define		AT91C_SMC_BAT_BYTE_WRITE		(0x1 <<  8)
-#define AT91C_SMC_DBW		(0x3 << 12)	/* Data Bus Width */
-#define		AT91C_SMC_DBW_WIDTH_EIGTH_BITS		(0x0 << 12)
-#define		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS	(0x1 << 12)
-#define		AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS	(0x2 << 12)
-#define AT91C_SMC_TDF		(0xF << 16)	/* Data Float Time */
-#define AT91C_SMC_TDFEN		(0x1 << 20)	/* TDF Enabled */
-#define AT91C_SMC_PMEN		(0x1 << 24)	/* Page Mode Enabled */
-#define AT91C_SMC_PS		(0x3 << 28)	/* Page Size */
-#define		AT91C_SMC_PS_SIZE_FOUR_BYTES		(0x0 << 28)
-#define		AT91C_SMC_PS_SIZE_EIGHT_BYTES		(0x1 << 28)
-#define		AT91C_SMC_PS_SIZE_SIXTEEN_BYTES		(0x2 << 28)
-#define		AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES	(0x3 << 28)
-/* SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x */
-/* SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x */
-/* SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x */
-/* SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x */
-/* SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x */
-
-/* AHB CCFG */
-typedef struct _AT91S_CCFG {
-	AT91_REG	Reserved0[1];
-	AT91_REG	CCFG_MPBS0;	/* MPB Slave 0 */
-	AT91_REG	CCFG_UDPHS;	/* AHB Periphs */
-	AT91_REG	CCFG_MPBS1;	/* MPB Slave 1 */
-	AT91_REG	CCFG_EBICSA;	/* EBI Chip Select Assignement */
-	AT91_REG	Reserved1[2];
-	AT91_REG	CCFG_MPBS2;	/* MPB Slave 2 */
-	AT91_REG	CCFG_MPBS3;	/* MPB Slave 3 */
-	AT91_REG	CCFG_BRIDGE;	/* APB Bridge */
-	AT91_REG	Reserved2[49];
-	AT91_REG	CCFG_MATRIXVERSION;/* Version */
-} AT91S_CCFG, *AT91PS_CCFG;
-
-/* CCFG_UDPHS : (CCFG Offset: 0x8) UDPHS Configuration */
-#define AT91C_CCFG_UDPHS_UDP_SELECT	(0x1 << 31)	/* UDPHS or UDP */
-#define		AT91C_CCFG_UDPHS_UDP_SELECT_UDPHS	(0x0 << 31)
-#define		AT91C_CCFG_UDPHS_UDP_SELECT_UDP		(0x1 << 31)
-/* CCFG_EBICSA : (CCFG Offset: 0x10) EBI Chip Select Assignement Register */
-#define AT91C_EBI_CS1A			(0x1 <<  1)	/* CS1 Assignment */
-#define		AT91C_EBI_CS1A_SMC			(0x0 <<  1)
-#define		AT91C_EBI_CS1A_BCRAMC			(0x1 <<  1)
-#define AT91C_EBI_CS3A			(0x1 <<  3)	/* CS 3 Assignment */
-#define		AT91C_EBI_CS3A_SMC			(0x0 <<  3)
-#define		AT91C_EBI_CS3A_SM			(0x1 <<  3)
-#define AT91C_EBI_CS4A			(0x1 <<  4)	/* CS4 Assignment */
-#define		AT91C_EBI_CS4A_SMC			(0x0 <<  4)
-#define		AT91C_EBI_CS4A_CF			(0x1 <<  4)
-#define AT91C_EBI_CS5A			(0x1 <<  5)	/* CS 5 Assignment */
-#define		AT91C_EBI_CS5A_SMC			(0x0 <<  5)
-#define		AT91C_EBI_CS5A_CF			(0x1 <<  5)
-#define AT91C_EBI_DBPUC			(0x1 <<  8)	/* Data Bus Pull-up */
-#define AT91C_EBI_DDRPUC		(0x1 <<  9)	/* DDDR DQS Pull-up */
-#define AT91C_EBI_SUP			(0x1 << 16)	/* EBI Supply */
-#define		AT91C_EBI_SUP_1V8			(0x0 << 16)
-#define		AT91C_EBI_SUP_3V3			(0x1 << 16)
-#define AT91C_EBI_LP			(0x1 << 17)	/* EBI Low Power */
-#define		AT91C_EBI_LP_LOW_DRIVE			(0x0 << 17)
-#define		AT91C_EBI_LP_STD_DRIVE			(0x1 << 17)
-#define AT91C_CCFG_DDR_SDR_SELECT	(0x1 << 31)	/* DDR or SDR */
-#define		AT91C_CCFG_DDR_SDR_SELECT_DDR		(0x0 << 31)
-#define		AT91C_CCFG_DDR_SDR_SELECT_SDR		(0x1 << 31)
-/* CCFG_BRIDGE : (CCFG Offset: 0x24) BRIDGE Configuration */
-#define AT91C_CCFG_AES_TDES_SELECT	(0x1 << 31)	/* AES or TDES */
-#define		AT91C_CCFG_AES_TDES_SELECT_AES		(0x0 << 31)
-#define		AT91C_CCFG_AES_TDES_SELECT_TDES		(0x1 << 31)
-
-/* PIO controller */
-typedef struct _AT91S_PIO {
-	AT91_REG	PIO_PER;	/* PIO Enable Register */
-	AT91_REG	PIO_PDR;	/* PIO Disable Register */
-	AT91_REG	PIO_PSR;	/* PIO Status Register */
-	AT91_REG	Reserved0[1];
-	AT91_REG	PIO_OER;	/* Output Enable Register */
-	AT91_REG	PIO_ODR;	/* Output Disable Register */
-	AT91_REG	PIO_OSR;	/* Output Status Register */
-	AT91_REG	Reserved1[1];
-	AT91_REG	PIO_IFER;	/* Input Filter Enable Register */
-	AT91_REG	PIO_IFDR;	/* Input Filter Disable Register */
-	AT91_REG	PIO_IFSR;	/* Input Filter Status Register */
-	AT91_REG	Reserved2[1];
-	AT91_REG	PIO_SODR;	/* Set Output Data Register */
-	AT91_REG	PIO_CODR;	/* Clear Output Data Register */
-	AT91_REG	PIO_ODSR;	/* Output Data Status Register */
-	AT91_REG	PIO_PDSR;	/* Pin Data Status Register */
-	AT91_REG	PIO_IER;	/* Interrupt Enable Register */
-	AT91_REG	PIO_IDR;	/* Interrupt Disable Register */
-	AT91_REG	PIO_IMR;	/* Interrupt Mask Register */
-	AT91_REG	PIO_ISR;	/* Interrupt Status Register */
-	AT91_REG	PIO_MDER;	/* Multi-driver Enable Register */
-	AT91_REG	PIO_MDDR;	/* Multi-driver Disable Register */
-	AT91_REG	PIO_MDSR;	/* Multi-driver Status Register */
-	AT91_REG	Reserved3[1];
-	AT91_REG	PIO_PPUDR;	/* Pull-up Disable Register */
-	AT91_REG	PIO_PPUER;	/* Pull-up Enable Register */
-	AT91_REG	PIO_PPUSR;	/* Pull-up Status Register */
-	AT91_REG	Reserved4[1];
-	AT91_REG	PIO_ASR;	/* Select A Register */
-	AT91_REG	PIO_BSR;	/* Select B Register */
-	AT91_REG	PIO_ABSR;	/* AB Select Status Register */
-	AT91_REG	Reserved5[9];
-	AT91_REG	PIO_OWER;	/* Output Write Enable Register */
-	AT91_REG	PIO_OWDR;	/* Output Write Disable Register */
-	AT91_REG	PIO_OWSR;	/* Output Write Status Register */
-} AT91S_PIO, *AT91PS_PIO;
-
-/* Power Management Controller */
-typedef struct _AT91S_PMC {
-	AT91_REG	PMC_SCER;	/* System Clock Enable Register */
-	AT91_REG	PMC_SCDR;	/* System Clock Disable Register */
-	AT91_REG	PMC_SCSR;	/* System Clock Status Register */
-	AT91_REG	Reserved0[1];
-	AT91_REG	PMC_PCER;	/* Peripheral Clock Enable Register */
-	AT91_REG	PMC_PCDR;	/* Peripheral Clock Disable Register */
-	AT91_REG	PMC_PCSR;	/* Peripheral Clock Status Register */
-	AT91_REG	PMC_UCKR;	/* UTMI Clock Configuration Register */
-	AT91_REG	PMC_MOR;	/* Main Oscillator Register */
-	AT91_REG	PMC_MCFR;	/* Main Clock  Frequency Register */
-	AT91_REG	PMC_PLLAR;	/* PLL A Register */
-	AT91_REG	PMC_PLLBR;	/* PLL B Register */
-	AT91_REG	PMC_MCKR;	/* Master Clock Register */
-	AT91_REG	Reserved1[3];
-	AT91_REG	PMC_PCKR[8];	/* Programmable Clock Register */
-	AT91_REG	PMC_IER;	/* Interrupt Enable Register */
-	AT91_REG	PMC_IDR;	/* Interrupt Disable Register */
-	AT91_REG	PMC_SR;		/* Status Register */
-	AT91_REG	PMC_IMR;	/* Interrupt Mask Register */
-} AT91S_PMC, *AT91PS_PMC;
-
-/* PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register */
-#define AT91C_PMC_PCK		(0x1 <<  0)	/* Processor Clock */
-#define AT91C_PMC_OTG		(0x1 <<  5)	/* USB OTG Clock */
-#define AT91C_PMC_UHP		(0x1 <<  6)	/* USB Host Port Clock */
-#define AT91C_PMC_UDP		(0x1 <<  7)	/* USB Device Port Clock */
-#define AT91C_PMC_PCK0		(0x1 <<  8)	/* Programmable Clock Output */
-#define AT91C_PMC_PCK1		(0x1 <<  9)	/* Programmable Clock Output */
-#define AT91C_PMC_PCK2		(0x1 << 10)	/* Programmable Clock Output */
-#define AT91C_PMC_PCK3		(0x1 << 11)	/* Programmable Clock Output */
-/* PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register */
-/* PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register */
-/* CKGR_UCKR : (PMC Offset: 0x1c) UTMI Clock Configuration Register */
-/* CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register */
-/* CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register */
-/* CKGR_PLLAR : (PMC Offset: 0x28) PLL A Register */
-/* CKGR_PLLBR : (PMC Offset: 0x2c) PLL B Register */
-/* PMC_MCKR : (PMC Offset: 0x30) Master Clock Register */
-#define AT91C_PMC_CSS		(0x3 <<  0)	/* Clock Selection */
-#define		AT91C_PMC_CSS_SLOW_CLK		(0x0 <<  0)	/* Slow Clk */
-#define		AT91C_PMC_CSS_MAIN_CLK		(0x1 <<  0)	/* Main Clk */
-#define		AT91C_PMC_CSS_PLLA_CLK		(0x2 <<  0)	/* PLL A Clk */
-#define		AT91C_PMC_CSS_PLLB_CLK		(0x3 <<  0)	/* PLL B Clk */
-#define AT91C_PMC_PRES		(0x7 <<  2)	/* Clock Prescaler */
-#define		AT91C_PMC_PRES_CLK		(0x0 <<  2)
-#define		AT91C_PMC_PRES_CLK_2		(0x1 <<  2)
-#define		AT91C_PMC_PRES_CLK_4		(0x2 <<  2)
-#define		AT91C_PMC_PRES_CLK_8		(0x3 <<  2)
-#define		AT91C_PMC_PRES_CLK_16		(0x4 <<  2)
-#define		AT91C_PMC_PRES_CLK_32		(0x5 <<  2)
-#define		AT91C_PMC_PRES_CLK_64		(0x6 <<  2)
-#define AT91C_PMC_MDIV		(0x3 <<  8)	/* Master Clock Division */
-#define		AT91C_PMC_MDIV_1		(0x0 <<  8)
-#define		AT91C_PMC_MDIV_2		(0x1 <<  8)
-#define		AT91C_PMC_MDIV_4		(0x2 <<  8)
-/* PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register */
-/* PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register */
-#define AT91C_PMC_MOSCS		(0x1 <<  0)	/* MOSC mask */
-#define AT91C_PMC_LOCKA		(0x1 <<  1)	/* PLL A mask */
-#define AT91C_PMC_LOCKB		(0x1 <<  2)	/* PLL B mask */
-#define AT91C_PMC_MCKRDY	(0x1 <<  3)	/* Master mask */
-#define AT91C_PMC_LOCKU		(0x1 <<  6)	/* PLL UTMI mask */
-#define AT91C_PMC_PCK0RDY	(0x1 <<  8)	/* PCK0_RDY mask */
-#define AT91C_PMC_PCK1RDY	(0x1 <<  9)	/* PCK1_RDY mask */
-#define AT91C_PMC_PCK2RDY	(0x1 << 10)	/* PCK2_RDY mask */
-#define AT91C_PMC_PCK3RDY	(0x1 << 11)	/* PCK3_RDY mask */
-/* PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register */
-/* PMC_SR : (PMC Offset: 0x68) PMC Status Register */
-/* PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register */
-
-/* Reset controller */
-typedef struct _AT91S_RSTC {
-	AT91_REG	RSTC_RCR;	/* Reset Control Register */
-	AT91_REG	RSTC_RSR;	/* Reset Status Register */
-	AT91_REG	RSTC_RMR;	/* Reset Mode Register */
-} AT91S_RSTC, *AT91PS_RSTC;
-
-/* RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register */
-#define AT91C_RSTC_PROCRST	(0x1 <<  0)	/* Processor Reset */
-#define AT91C_RSTC_ICERST	(0x1 <<  1)	/* ICE Interface Reset */
-#define AT91C_RSTC_PERRST	(0x1 <<  2)	/* Peripheral Reset */
-#define AT91C_RSTC_EXTRST	(0x1 <<  3)	/* External Reset */
-#define AT91C_RSTC_KEY		(0xFF << 24)	/* Password */
-/* RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register */
-#define AT91C_RSTC_URSTS	(0x1 <<  0)	/* User Reset Status */
-#define AT91C_RSTC_RSTTYP	(0x7 <<  8)	/* Reset Type */
-#define		AT91C_RSTC_RSTTYP_GENERAL	(0x0 <<  8)
-#define		AT91C_RSTC_RSTTYP_WAKEUP	(0x1 <<  8)
-#define		AT91C_RSTC_RSTTYP_WATCHDOG	(0x2 <<  8)
-#define		AT91C_RSTC_RSTTYP_SOFTWARE	(0x3 <<  8)
-#define		AT91C_RSTC_RSTTYP_USER		(0x4 <<  8)
-#define AT91C_RSTC_NRSTL	(0x1 << 16)	/* NRST pin level */
-#define AT91C_RSTC_SRCMP	(0x1 << 17)	/* Software Rst in Progress. */
-/* RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register */
-#define AT91C_RSTC_URSTEN	(0x1 <<  0)	/* User Reset Enable */
-#define AT91C_RSTC_URSTIEN	(0x1 <<  4)	/* User Reset Int. Enable */
-#define AT91C_RSTC_ERSTL	(0xF <<  8)	/* User Reset Enable */
-
-/* Periodic Timer Controller */
-typedef struct _AT91S_PITC {
-	AT91_REG	PITC_PIMR;	/* Period Interval Mode Register */
-	AT91_REG	PITC_PISR;	/* Period Interval Status Register */
-	AT91_REG	PITC_PIVR;	/* Period Interval Value Register */
-	AT91_REG	PITC_PIIR;	/* Period Interval Image Register */
-} AT91S_PITC, *AT91PS_PITC;
-
-/* PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register */
-#define AT91C_PITC_PIV		(0xFFFFF <<  0)	/* Periodic Interval Value */
-#define AT91C_PITC_PITEN	(0x1 << 24)	/* PIT Enable */
-#define AT91C_PITC_PITIEN	(0x1 << 25)	/* PIT Interrupt Enable */
-/* PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register */
-#define AT91C_PITC_PITS		(0x1 <<  0)	/* PIT Status */
-/* PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register */
-#define AT91C_PITC_CPIV		(0xFFFFF <<  0)	/* Current Value */
-#define AT91C_PITC_PICNT	(0xFFF << 20)	/* Periodic Interval Counter */
-/* PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register */
-
-/* Serial Paraller Interface */
-typedef struct _AT91S_SPI {
-	AT91_REG	SPI_CR;		/* Control Register */
-	AT91_REG	SPI_MR;		/* Mode Register */
-	AT91_REG	SPI_RDR;	/* Receive Data Register */
-	AT91_REG	SPI_TDR;	/* Transmit Data Register */
-	AT91_REG	SPI_SR;		/* Status Register */
-	AT91_REG	SPI_IER;	/* Interrupt Enable Register */
-	AT91_REG	SPI_IDR;	/* Interrupt Disable Register */
-	AT91_REG	SPI_IMR;	/* Interrupt Mask Register */
-	AT91_REG	Reserved0[4];
-	AT91_REG	SPI_CSR[4];	/* Chip Select Register */
-	AT91_REG	Reserved1[48];
-	AT91_REG	SPI_RPR;	/* Receive Pointer Register */
-	AT91_REG	SPI_RCR;	/* Receive Counter Register */
-	AT91_REG	SPI_TPR;	/* Transmit Pointer Register */
-	AT91_REG	SPI_TCR;	/* Transmit Counter Register */
-	AT91_REG	SPI_RNPR;	/* Receive Next Pointer Register */
-	AT91_REG	SPI_RNCR;	/* Receive Next Counter Register */
-	AT91_REG	SPI_TNPR;	/* Transmit Next Pointer Register */
-	AT91_REG	SPI_TNCR;	/* Transmit Next Counter Register */
-	AT91_REG	SPI_PTCR;	/* PDC Transfer Control Register */
-	AT91_REG	SPI_PTSR;	/* PDC Transfer Status Register */
-} AT91S_SPI, *AT91PS_SPI;
-
-/* SPI_CR : (SPI Offset: 0x0) SPI Control Register */
-#define AT91C_SPI_SPIEN		(0x1 <<  0)	/* SPI Enable */
-#define AT91C_SPI_SPIDIS	(0x1 <<  1)	/* SPI Disable */
-#define AT91C_SPI_SWRST		(0x1 <<  7)	/* SPI Software reset */
-#define AT91C_SPI_LASTXFER	(0x1 << 24)	/* SPI Last Transfer */
-/* SPI_MR : (SPI Offset: 0x4) SPI Mode Register */
-#define AT91C_SPI_MSTR		(0x1 <<  0)	/* Master/Slave Mode */
-#define AT91C_SPI_PS		(0x1 <<  1)	/* Peripheral Select */
-#define		AT91C_SPI_PS_FIXED		(0x0 <<  1)
-#define		AT91C_SPI_PS_VARIABLE		(0x1 <<  1)
-#define AT91C_SPI_PCSDEC	(0x1 <<  2)	/* Chip Select Decode */
-#define AT91C_SPI_FDIV		(0x1 <<  3)	/* Clock Selection */
-#define AT91C_SPI_MODFDIS	(0x1 <<  4)	/* Mode Fault Detection */
-#define AT91C_SPI_LLB		(0x1 <<  7)	/* Clock Selection */
-#define AT91C_SPI_PCS		(0xF << 16)	/* Peripheral Chip Select */
-#define AT91C_SPI_DLYBCS	(0xFF << 24)	/* Delay Between Chip Selects */
-/* SPI_RDR : (SPI Offset: 0x8) Receive Data Register */
-#define AT91C_SPI_RD		(0xFFFF <<  0)	/* Receive Data */
-#define AT91C_SPI_RPCS		(0xF << 16)	/* Peripheral CS Status */
-/* SPI_TDR : (SPI Offset: 0xc) Transmit Data Register */
-#define AT91C_SPI_TD		(0xFFFF <<  0)	/* Transmit Data */
-#define AT91C_SPI_TPCS		(0xF << 16)	/* Peripheral CS Status */
-/* SPI_SR : (SPI Offset: 0x10) Status Register */
-#define AT91C_SPI_RDRF		(0x1 <<  0)	/* Receive Data Register Full */
-#define AT91C_SPI_TDRE		(0x1 <<  1)	/* Trans. Data Register Empty */
-#define AT91C_SPI_MODF		(0x1 <<  2)	/* Mode Fault Error */
-#define AT91C_SPI_OVRES		(0x1 <<  3)	/* Overrun Error Status */
-#define AT91C_SPI_ENDRX		(0x1 <<  4)	/* End of Receiver Transfer */
-#define AT91C_SPI_ENDTX		(0x1 <<  5)	/* End of Receiver Transfer */
-#define AT91C_SPI_RXBUFF	(0x1 <<  6)	/* RXBUFF Interrupt */
-#define AT91C_SPI_TXBUFE	(0x1 <<  7)	/* TXBUFE Interrupt */
-#define AT91C_SPI_NSSR		(0x1 <<  8)	/* NSSR Interrupt */
-#define AT91C_SPI_TXEMPTY	(0x1 <<  9)	/* TXEMPTY Interrupt */
-#define AT91C_SPI_SPIENS	(0x1 << 16)	/* Enable Status */
-/* SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register */
-/* SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register */
-/* SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register */
-/* SPI_CSR : (SPI Offset: 0x30) Chip Select Register */
-#define AT91C_SPI_CPOL		(0x1 <<  0)	/* Clock Polarity */
-#define AT91C_SPI_NCPHA		(0x1 <<  1)	/* Clock Phase */
-#define AT91C_SPI_CSAAT		(0x1 <<  3)	/* CS Active After Transfer */
-#define AT91C_SPI_BITS		(0xF <<  4)	/* Bits Per Transfer */
-#define		AT91C_SPI_BITS_8		(0x0 <<  4)	/* 8 Bits */
-#define		AT91C_SPI_BITS_9		(0x1 <<  4)	/* 9 Bits */
-#define		AT91C_SPI_BITS_10		(0x2 <<  4)	/* 10 Bits */
-#define		AT91C_SPI_BITS_11		(0x3 <<  4)	/* 11 Bits */
-#define		AT91C_SPI_BITS_12		(0x4 <<  4)	/* 12 Bits */
-#define		AT91C_SPI_BITS_13		(0x5 <<  4)	/* 13 Bits */
-#define		AT91C_SPI_BITS_14		(0x6 <<  4)	/* 14 Bits */
-#define		AT91C_SPI_BITS_15		(0x7 <<  4)	/* 15 Bits */
-#define		AT91C_SPI_BITS_16		(0x8 <<  4)	/* 16 Bits */
-#define AT91C_SPI_SCBR		(0xFF <<  8)	/* Serial Clock Baud Rate */
-#define AT91C_SPI_DLYBS		(0xFF << 16)	/* Delay Before SPCK */
-#define AT91C_SPI_DLYBCT	(0xFF << 24)	/* Delay Between Transfers */
-/* SPI_PTCR : PDC Transfer Control Register */
-#define AT91C_PDC_RXTEN		(0x1 <<  0)	/* Receiver Transfer Enable */
-#define AT91C_PDC_RXTDIS	(0x1 <<  1)	/* Receiver Transfer Disable */
-#define AT91C_PDC_TXTEN		(0x1 <<  8)	/* Transm. Transfer Enable */
-#define AT91C_PDC_TXTDIS	(0x1 <<  9)	/* Transm. Transfer Disable */
-
-/* PIO definitions */
-#define AT91C_PIO_PA0		(1 <<  0)	/* Pin Controlled by PA0 */
-#define AT91C_PA0_SPI0_MISO	AT91C_PIO_PA0
-#define AT91C_PIO_PA1		(1 <<  1)	/* Pin Controlled by PA1 */
-#define AT91C_PA1_SPI0_MOSI	AT91C_PIO_PA1
-#define AT91C_PIO_PA2		(1 <<  2)	/* Pin Controlled by PA2 */
-#define AT91C_PA2_SPI0_SPCK	AT91C_PIO_PA2
-#define AT91C_PIO_PA3		(1 <<  3)	/* Pin Controlled by PA3 */
-#define AT91C_PA3_SPI0_NPCS1	AT91C_PIO_PA3
-#define AT91C_PIO_PA4		(1 <<  4)	/* Pin Controlled by PA4 */
-#define AT91C_PA4_SPI0_NPCS2A	AT91C_PIO_PA4
-#define AT91C_PIO_PA5		(1 <<  5)	/* Pin Controlled by PA5 */
-#define AT91C_PA5_SPI0_NPCS0	AT91C_PIO_PA5
-#define AT91C_PIO_PA10		(1 << 10)	/* Pin Controlled by PA10 */
-#define AT91C_PIO_PA11		(1 << 11)	/* Pin Controlled by PA11 */
-#define AT91C_PIO_PA22		(1 << 22)	/* Pin Controlled by PA22 */
-#define AT91C_PA22_TXD0		AT91C_PIO_PA22
-#define AT91C_PIO_PA23		(1 << 23)	/* Pin Controlled by PA23 */
-#define AT91C_PA23_RXD0		AT91C_PIO_PA23
-#define AT91C_PIO_PA28		(1 << 28)	/* Pin Controlled by PA28 */
-#define AT91C_PA28_SPI0_NPCS3A	AT91C_PIO_PA28
-#define AT91C_PIO_PB21		(1 << 21)	/* Pin Controlled by PB21 */
-#define AT91C_PB21_E_TXCK	AT91C_PIO_PB21
-#define AT91C_PIO_PB22		(1 << 22)	/* Pin Controlled by PB22 */
-#define AT91C_PB22_E_RXDV	AT91C_PIO_PB22
-#define AT91C_PIO_PB23		(1 << 23)	/* Pin Controlled by PB23 */
-#define AT91C_PB23_E_TX0	AT91C_PIO_PB23
-#define AT91C_PIO_PB24		(1 << 24)	/* Pin Controlled by PB24 */
-#define AT91C_PB24_E_TX1	AT91C_PIO_PB24
-#define AT91C_PIO_PB25		(1 << 25)	/* Pin Controlled by PB25 */
-#define AT91C_PB25_E_RX0	AT91C_PIO_PB25
-#define AT91C_PIO_PB26		(1 << 26)	/* Pin Controlled by PB26 */
-#define AT91C_PB26_E_RX1	AT91C_PIO_PB26
-#define AT91C_PIO_PB27		(1 << 27)	/* Pin Controlled by PB27 */
-#define AT91C_PB27_E_RXER	AT91C_PIO_PB27
-#define AT91C_PIO_PB28		(1 << 28)	/* Pin Controlled by PB28 */
-#define AT91C_PB28_E_TXEN	AT91C_PIO_PB28
-#define AT91C_PIO_PB29		(1 << 29)	/* Pin Controlled by PB29 */
-#define AT91C_PB29_E_MDC	AT91C_PIO_PB29
-#define AT91C_PIO_PB30		(1 << 30)	/* Pin Controlled by PB30 */
-#define AT91C_PB30_E_MDIO	AT91C_PIO_PB30
-#define AT91C_PIO_PB31		(1 << 31)	/* Pin Controlled by PB31 */
-#define AT91C_PIO_PC29		(1 << 29)	/* Pin Controlled by PC29 */
-#define AT91C_PIO_PC30		(1 << 30)	/* Pin Controlled by PC30 */
-#define AT91C_PC30_DRXD		AT91C_PIO_PC30
-#define AT91C_PIO_PC31		(1 << 31)	/* Pin Controlled by PC31 */
-#define AT91C_PC31_DTXD		AT91C_PIO_PC31
-#define AT91C_PIO_PD0		(1 <<  0)	/* Pin Controlled by PD0 */
-#define AT91C_PD0_TXD1		AT91C_PIO_PD0
-#define AT91C_PD0_SPI0_NPCS2D	AT91C_PIO_PD0
-#define AT91C_PIO_PD1		(1 <<  1)	/* Pin Controlled by PD1 */
-#define AT91C_PD1_RXD1		AT91C_PIO_PD1
-#define AT91C_PD1_SPI0_NPCS3D	AT91C_PIO_PD1
-#define AT91C_PIO_PD2		(1 <<  2)	/* Pin Controlled by PD2 */
-#define AT91C_PD2_TXD2		AT91C_PIO_PD2
-#define AT91C_PIO_PD3		(1 <<  3)	/* Pin Controlled by PD3 */
-#define AT91C_PD3_RXD2		AT91C_PIO_PD3
-#define AT91C_PIO_PD15		(1 << 15)	/* Pin Controlled by PD15 */
-
-/* Peripheral ID */
-#define AT91C_ID_SYS		 1	/* System Controller */
-#define AT91C_ID_PIOABCD	 2	/* Parallel IO Controller A, B, C, D */
-#define AT91C_ID_US0		 8	/* USART 0 */
-#define AT91C_ID_US1		 9	/* USART 1 */
-#define AT91C_ID_US2		10	/* USART 2 */
-#define AT91C_ID_SPI0		15	/* Serial Peripheral Interface 0 */
-#define AT91C_ID_EMAC		22	/* Ethernet Mac */
-#define AT91C_ID_UHP		29	/* USB Host Port */
-
-/* Base addresses */
-#define AT91C_BASE_SMC		((AT91PS_SMC)	0xFFFFE800)	/* SMC */
-#define AT91C_BASE_CCFG		((AT91PS_CCFG)	0xFFFFEB10)	/* CCFG */
-#define AT91C_BASE_DBGU		((unsigned long)0xFFFFEE00)	/* DBGU */
-#define AT91C_BASE_PIOA		((AT91PS_PIO)	0xFFFFF200)	/* PIOA */
-#define AT91C_BASE_PIOB		((AT91PS_PIO)	0xFFFFF400)	/* PIOB */
-#define AT91C_BASE_PIOC		((AT91PS_PIO)	0xFFFFF600)	/* PIOC */
-#define AT91C_BASE_PIOD		((AT91PS_PIO)	0xFFFFF800)	/* PIOD */
-#define AT91C_BASE_PMC		((AT91PS_PMC)	0xFFFFFC00)	/* PMC */
-#define AT91C_BASE_RSTC		((AT91PS_RSTC)	0xFFFFFD00)	/* RSTC */
-#define AT91C_BASE_PITC		((AT91PS_PITC)	0xFFFFFD30)	/* PITC */
-#define AT91C_BASE_US0		((unsigned long)0xFFF8C000)	/* US0 */
-#define AT91C_BASE_US1		((unsigned long)0xFFF90000)	/* US1 */
-#define AT91C_BASE_US2		((unsigned long)0xFFF94000)	/* US2 */
-#define AT91C_BASE_SPI0		((AT91PS_SPI)	0xFFFA4000)	/* SPI0 */
-#define AT91C_BASE_MACB		((unsigned long)0xFFFBC000)	/* MACB */
-
-#endif
diff --git a/include/asm-arm/arch-at91cap9/hardware.h b/include/asm-arm/arch-at91cap9/hardware.h
deleted file mode 100644
index ec0a67163d..0000000000
--- a/include/asm-arm/arch-at91cap9/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#include <asm/arch/AT91CAP9.h>
-
-/*
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr:	the pointer to the member.
- * @type:	the type of the container struct this is embedded in.
- * @member:	the name of the member within the struct.
- */
-#define container_of(ptr, type, member) ({			\
-	const typeof(((type *)0)->member) *__mptr = (ptr);	\
-	(type *)((char *)__mptr - offsetof(type, member)); })
-
-#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_pio.h b/include/asm-arm/arch-at91sam9/at91_pio.h
new file mode 100644
index 0000000000..84c3866d30
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_pit.h b/include/asm-arm/arch-at91sam9/at91_pit.h
new file mode 100644
index 0000000000..5026325a5a
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h
new file mode 100644
index 0000000000..52cd8e5dab
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91_pmc.h
@@ -0,0 +1,99 @@
+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91_PMC_MDIV_1			(0 << 8)
+#define			AT91_PMC_MDIV_2			(1 << 8)
+#define			AT91_PMC_MDIV_3			(2 << 8)
+#define			AT91_PMC_MDIV_4			(3 << 8)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_rstc.h b/include/asm-arm/arch-at91sam9/at91_rstc.h
new file mode 100644
index 0000000000..fb8d1618a2
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91_rstc.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91_spi.h b/include/asm-arm/arch-at91sam9/at91_spi.h
new file mode 100644
index 0000000000..aaad92621c
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91_spi.h
@@ -0,0 +1,105 @@
+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#define AT91_SPI_RPR		0x0100			/* Receive Pointer Register */
+
+#define AT91_SPI_RCR		0x0104			/* Receive Counter Register */
+
+#define AT91_SPI_TPR		0x0108			/* Transmit Pointer Register */
+
+#define AT91_SPI_TCR		0x010c			/* Transmit Counter Register */
+
+#define AT91_SPI_RNPR		0x0110			/* Receive Next Pointer Register */
+
+#define AT91_SPI_RNCR		0x0114			/* Receive Next Counter Register */
+
+#define AT91_SPI_TNPR		0x0118			/* Transmit Next Pointer Register */
+
+#define AT91_SPI_TNCR		0x011c			/* Transmit Next Counter Register */
+
+#define AT91_SPI_PTCR		0x0120			/* PDC Transfer Control Register */
+#define		AT91_SPI_RXTEN		(0x1 << 0)		/* Receiver Transfer Enable */
+#define		AT91_SPI_RXTDIS		(0x1 << 1)		/* Receiver Transfer Disable */
+#define		AT91_SPI_TXTEN		(0x1 << 8)		/* Transmitter Transfer Enable */
+#define		AT91_SPI_TXTDIS		(0x1 << 9)		/* Transmitter Transfer Disable */
+
+#define AT91_SPI_PTSR		0x0124			/* PDC Transfer Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h
new file mode 100644
index 0000000000..e16909c641
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91cap9.h
@@ -0,0 +1,125 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0		8	/* USART 0 */
+#define AT91CAP9_ID_US1		9	/* USART 1 */
+#define AT91CAP9_ID_US2		10	/* USART 2 */
+#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN		13	/* CAN */
+#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
+#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC	22	/* Ethernet */
+#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
+#define AT91CAP9_ID_DMA		27	/* DMA Controller */
+#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP		29	/* USB Host Port */
+#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS		0xfff78000
+#define AT91CAP9_BASE_TCB0		0xfff7c000
+#define AT91CAP9_BASE_TC0		0xfff7c000
+#define AT91CAP9_BASE_TC1		0xfff7c040
+#define AT91CAP9_BASE_TC2		0xfff7c080
+#define AT91CAP9_BASE_MCI0		0xfff80000
+#define AT91CAP9_BASE_MCI1		0xfff84000
+#define AT91CAP9_BASE_TWI		0xfff88000
+#define AT91CAP9_BASE_US0		0xfff8c000
+#define AT91CAP9_BASE_US1		0xfff90000
+#define AT91CAP9_BASE_US2		0xfff94000
+#define AT91CAP9_BASE_SSC0		0xfff98000
+#define AT91CAP9_BASE_SSC1		0xfff9c000
+#define AT91CAP9_BASE_AC97C		0xfffa0000
+#define AT91CAP9_BASE_SPI0		0xfffa4000
+#define AT91CAP9_BASE_SPI1		0xfffa8000
+#define AT91CAP9_BASE_CAN		0xfffac000
+#define AT91CAP9_BASE_PWMC		0xfffb8000
+#define AT91CAP9_BASE_EMAC		0xfffbc000
+#define AT91CAP9_BASE_ADC		0xfffc0000
+#define AT91CAP9_BASE_ISI		0xfffc4000
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91CAP9_BASE_US0
+#define AT91_USART1	AT91CAP9_BASE_US1
+#define AT91_USART2	AT91CAP9_BASE_US2
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91CAP9_UDPHS_BASE	0x00600000	/* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91cap9_matrix.h b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h
new file mode 100644
index 0000000000..a641686b6c
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9260.h b/include/asm-arm/arch-at91sam9/at91sam9260.h
new file mode 100644
index 0000000000..1bf45989b5
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9260.h
@@ -0,0 +1,124 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9260_BASE_US0
+#define AT91_USART1	AT91SAM9260_BASE_US1
+#define AT91_USART2	AT91SAM9260_BASE_US2
+#define AT91_USART3	AT91SAM9260_BASE_US3
+#define AT91_USART4	AT91SAM9260_BASE_US4
+#define AT91_USART5	AT91SAM9260_BASE_US5
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h
new file mode 100644
index 0000000000..a8e9fec6c7
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam926x_mc.h b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h
new file mode 100644
index 0000000000..041138f809
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h
@@ -0,0 +1,140 @@
+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91cap9/clk.h b/include/asm-arm/arch-at91sam9/clk.h
index ca65a2a852..86da9a6e09 100644
--- a/include/asm-arm/arch-at91cap9/clk.h
+++ b/include/asm-arm/arch-at91sam9/clk.h
@@ -28,12 +28,12 @@
 
 static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
 {
-	return AT91C_MASTER_CLOCK;
+	return AT91_MASTER_CLOCK;
 }
 
 static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
 {
-	return AT91C_MASTER_CLOCK;
+	return AT91_MASTER_CLOCK;
 }
 
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h
new file mode 100644
index 0000000000..2500eae2a4
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/gpio.h
@@ -0,0 +1,366 @@
+/*
+ * include/asm-arm/arch-at91/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91_GPIO_H
+#define __ASM_ARCH_AT91_GPIO_H
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/at91_pio.h>
+
+#define PIN_BASE		32
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+static unsigned long at91_pios[] = {
+	AT91_PIOA,
+	AT91_PIOB,
+	AT91_PIOC,
+#ifdef AT91_PIOD
+	AT91_PIOD,
+#ifdef AT91_PIOE
+	AT91_PIOE
+#endif
+#endif
+};
+
+static inline void *pin_to_controller(unsigned pin)
+{
+	pin -= PIN_BASE;
+	pin /= 32;
+	return (void *)(AT91_BASE_SYS + at91_pios[pin]);
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+	pin -= PIN_BASE;
+	return 1 << (pin % 32);
+}
+
+/*
+ * mux the pin to the "GPIO" peripheral role.
+ */
+static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
+{
+	void 		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+static inline int at91_set_A_periph(unsigned pin, int use_pullup)
+{
+	void 		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ASR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+static inline int at91_set_B_periph(unsigned pin, int use_pullup)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_BSR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ODR);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+static inline int at91_set_gpio_output(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + PIO_PUDR);
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+static inline int at91_set_deglitch(unsigned pin, int is_on)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+	return 0;
+}
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+static inline int at91_set_multi_drive(unsigned pin, int is_on)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+	return 0;
+}
+
+static inline int gpio_direction_input(unsigned pin)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EINVAL;
+	__raw_writel(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EINVAL;
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	return 0;
+}
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+static inline int at91_set_gpio_value(unsigned pin, int value)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	return 0;
+}
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+static inline int at91_get_gpio_value(unsigned pin)
+{
+	void		*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+	u32		pdsr;
+
+	pdsr = __raw_readl(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h
new file mode 100644
index 0000000000..80b334f36e
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/hardware.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-at91/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_AT91RM9200)
+#include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#define AT91_BASE_EMAC	AT91SAM9260_BASE_EMAC
+#define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
+#define AT91_ID_UHP	AT91SAM9260_ID_UHP
+#define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
+#elif defined(CONFIG_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
+#elif defined(CONFIG_AT91SAM9RL)
+#include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_AT91CAP9)
+#include <asm/arch/at91cap9.h>
+#define AT91_BASE_EMAC	AT91CAP9_BASE_EMAC
+#define AT91_BASE_SPI	AT91CAP9_BASE_SPI0
+#define AT91_ID_UHP	AT91CAP9_ID_UHP
+#define AT91_PMC_UHP	AT91CAP9_PMC_UHP
+#elif defined(CONFIG_AT91X40)
+#include <asm/arch/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+/*
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof(((type *)0)->member) *__mptr = (ptr);	\
+	(type *)((char *)__mptr - offsetof(type, member)); })
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/io.h b/include/asm-arm/arch-at91sam9/io.h
new file mode 100644
index 0000000000..be9e9abe56
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/io.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-at91/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <asm/io.h>
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void *addr = (void *)AT91_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void *addr = (void *)AT91_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91cap9/memory-map.h b/include/asm-arm/arch-at91sam9/memory-map.h
index eee7bd6d1b..da98822461 100644
--- a/include/asm-arm/arch-at91cap9/memory-map.h
+++ b/include/asm-arm/arch-at91sam9/memory-map.h
@@ -24,11 +24,11 @@
 #ifndef __ASM_ARM_ARCH_MEMORYMAP_H__
 #define __ASM_ARM_ARCH_MEMORYMAP_H__
 
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/hardware.h>
 
-#define USART0_BASE AT91C_BASE_US0
-#define USART1_BASE AT91C_BASE_US1
-#define USART2_BASE AT91C_BASE_US2
-#define USART3_BASE AT91C_BASE_DBGU
+#define USART0_BASE AT91_USART0
+#define USART1_BASE AT91_USART1
+#define USART2_BASE AT91_USART2
+#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index f0dfd71aef..dab21d0c0a 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Stelian Pop <stelian.pop <at> leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
@@ -28,8 +28,8 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK	200000000	/* from 12 MHz crystal */
-#define AT91C_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
+#define AT91_MAIN_CLOCK		200000000	/* from 12 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
 #define CFG_HZ			1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
@@ -46,19 +46,9 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SKIP_RELOCATE_UBOOT
 
-#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN		ROUND(CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
-
-#define CONFIG_BAUDRATE		115200
-
 /*
  * Hardware drivers
  */
-
 #define CONFIG_ATMEL_USART	1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -104,7 +94,9 @@
 #define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
 #define CFG_MAX_DATAFLASH_BANKS		1
 #define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define CONFIG_NEW_PARTITION		1
+#define AT91_SPI_CLK			20000000
+#define DATAFLASH_TCSS			(0xFA << 16)
+#define DATAFLASH_TCHS			(0x8 << 24)
 
 /* NOR flash */
 #define CFG_FLASH_CFI			1
@@ -114,39 +106,11 @@
 #define CFG_MAX_FLASH_SECT		256
 #define CFG_MAX_FLASH_BANKS		1
 
-#define AT91C_FLASH_NWE_SETUP		(4 << 0)
-#define AT91C_FLASH_NCS_WR_SETUP	(2 << 8)
-#define AT91C_FLASH_NRD_SETUP		(4 << 16)
-#define AT91C_FLASH_NCS_RD_SETUP	(2 << 24)
-
-#define AT91C_FLASH_NWE_PULSE		(8 << 0)
-#define AT91C_FLASH_NCS_WR_PULSE	(10 << 8)
-#define AT91C_FLASH_NRD_PULSE		(8 << 16)
-#define AT91C_FLASH_NCS_RD_PULSE	(10 << 24)
-
-#define AT91C_FLASH_NWE_CYCLE		(16 << 0)
-#define AT91C_FLASH_NRD_CYCLE		(16 << 16)
-
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
 #define CFG_MAX_NAND_DEVICE		1
 #define CFG_NAND_BASE			0x40000000
 
-#define AT91C_SM_NWE_SETUP		(2 << 0)
-#define AT91C_SM_NCS_WR_SETUP		(1 << 8)
-#define AT91C_SM_NRD_SETUP		(2 << 16)
-#define AT91C_SM_NCS_RD_SETUP		(1 << 24)
-
-#define AT91C_SM_NWE_PULSE		(4 << 0)
-#define AT91C_SM_NCS_WR_PULSE		(6 << 8)
-#define AT91C_SM_NRD_PULSE		(4 << 16)
-#define AT91C_SM_NCS_RD_PULSE		(6 << 24)
-
-#define AT91C_SM_NWE_CYCLE		(8 << 0)
-#define AT91C_SM_NRD_CYCLE		(8 << 16)
-
-#define AT91C_SM_TDF			(1 << 16)
-
 /* Ethernet */
 #define CONFIG_MACB			1
 #define CONFIG_RMII			1
@@ -159,15 +123,14 @@
 #define LITTLEENDIAN			1
 #define CONFIG_DOS_PARTITION		1
 #define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		0x00700000	/* AT91C_BASE_UHP */
+#define CFG_USB_OHCI_REGS_BASE		0x00700000	/* AT91_BASE_UHP */
 #define CFG_USB_OHCI_SLOT_NAME		"at91cap9"
 #define CFG_USB_OHCI_MAX_ROOT_PORTS	2
 
-
 #define CFG_LOAD_ADDR			0x72000000	/* load address */
 
 #define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x73000000
+#define CFG_MEMTEST_END			0x73e00000
 
 #define CFG_USE_DATAFLASH		1
 #undef CFG_USE_NORFLASH
@@ -194,6 +157,7 @@
 
 #endif
 
+#define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
 #define CFG_PROMPT		"U-Boot> "
@@ -203,6 +167,13 @@
 #define CFG_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		ROUND(CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 5b7212a68f..951ce160a4 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -51,7 +51,7 @@
 #define MC_ASR_VAL	0x00000000
 #define MC_AASR_VAL	0x00000000
 #define EBI_CFGR_VAL	0x00000000
-#define SMC2_CSR_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
new file mode 100644
index 0000000000..96d1b8dff3
--- /dev/null
+++ b/include/configs/at91sam9260ek.h
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9260EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		198656000	/* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	99328000	/* peripheral = main / 2 */
+#define CFG_HZ			1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9260	1	/* It's an Atmel AT91SAM9260 SoC*/
+#define CONFIG_AT91SAM9260EK	1	/* on an AT91SAM9260EK Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 rw rootfstype=jffs2"
+
+/* #define CONFIG_ENV_OVERWRITE	1 */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS		2
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
+#define AT91_SPI_CLK			33000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CFG_MAX_NAND_DEVICE		1
+#define CFG_NAND_BASE			0x40000000
+
+/* NOR flash - no real flash on this board */
+#define CFG_NO_FLASH			1
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW		1
+#define LITTLEENDIAN			1
+#define CONFIG_DOS_PARTITION		1
+#define CFG_USB_OHCI_CPU_INIT		1
+#define CFG_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CFG_LOAD_ADDR			0x22000000	/* load address */
+
+#define CFG_MEMTEST_START		PHYS_SDRAM
+#define CFG_MEMTEST_END			0x23e00000
+
+#undef CFG_USE_DATAFLASH_CS0
+#define CFG_USE_DATAFLASH_CS1		1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH	1
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET		0x4200
+#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC003DE00 0x22000000 0x200040; bootm"
+
+#elif CFG_USE_DATAFLASH_CS1
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
+#define CFG_ENV_IS_IN_DATAFLASH	1
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CFG_ENV_OFFSET		0x4200
+#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xD003DE00 0x22000000 0x200040; bootm"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET		0x60000
+#define CFG_ENV_OFFSET_REDUND	0x80000
+#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT		"U-Boot> "
+#define CFG_CBSIZE		256
+#define CFG_MAXARGS		16
+#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index d22d350579..bce5fcd82f 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -50,7 +50,7 @@
 #define MC_ASR_VAL	0x00000000
 #define MC_AASR_VAL	0x00000000
 #define EBI_CFGR_VAL	0x00000000
-#define SMC2_CSR_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index f93c3bcd6f..e9c6d8e7ae 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -51,7 +51,7 @@
 #define MC_ASR_VAL	0x00000000
 #define MC_AASR_VAL	0x00000000
 #define EBI_CFGR_VAL	0x00000000
-#define SMC2_CSR_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR_VAL	0x2031BE01 /* 184.320000 MHz for PCK */
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 294221f941..2eb4af1554 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -55,7 +55,7 @@
 #define MC_ASR_VAL	0x00000000
 #define MC_AASR_VAL	0x00000000
 #define EBI_CFGR_VAL	0x00000000
-#define SMC2_CSR_VAL	0x00003084 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL	0x00003084 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR_VAL	0x20263E04 /* 180 MHz for PCK */
diff --git a/include/dataflash.h b/include/dataflash.h
index fbd5e17f44..68f0324158 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -38,11 +38,7 @@
 #include "config.h"
 
 /*number of protected area*/
-#ifdef	CONFIG_NEW_PARTITION
-# define NB_DATAFLASH_AREA	6
-#else
-# define NB_DATAFLASH_AREA	4
-#endif
+#define NB_DATAFLASH_AREA		5
 
 #ifdef CFG_NO_FLASH
 
diff --git a/net/eth.c b/net/eth.c
index 3b86f879d2..c4f24c64b6 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -64,7 +64,7 @@ extern int greth_initialize(bd_t *);
 extern int atngw100_eth_initialize(bd_t *);
 extern int mcffec_initialize(bd_t*);
 extern int mcdmafec_initialize(bd_t*);
-extern int at91cap9_eth_initialize(bd_t *);
+extern int at91sam9_eth_initialize(bd_t *);
 
 #ifdef CONFIG_API
 extern void (*push_packet)(volatile void *, int);
@@ -288,8 +288,8 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_FSLDMAFEC)
 	mcdmafec_initialize(bis);
 #endif
-#if defined(CONFIG_AT91CAP9)
-	at91cap9_eth_initialize(bis);
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+	at91sam9_eth_initialize(bis);
 #endif
 
 	if (!eth_devices) {