diff options
| author | Michal Simek <michal.simek@xilinx.com> | 2020-06-05 11:45:12 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-06-15 11:23:41 -0400 |
| commit | a633a804a2a32693180ef156ed1a2dbc70b6d392 (patch) | |
| tree | a453fc100b3cdee8628576649ba01d73c3515b92 | |
| parent | 05f0c746069fc950243c108ac90bc1a221c903c5 (diff) | |
trivial: Fix booot occurences
s/booot/boot/g
The first ase is booot instead of boot and second u-booot instead of
u-boot.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| -rw-r--r-- | board/freescale/p1010rdb/README.P1010RDB-PA | 2 | ||||
| -rw-r--r-- | cmd/mmc.c | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 46c61237c7..0cb950d845 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off' Setting of hwconfig =================== If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or -"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example: +"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example: setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi" By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM @@ -1004,7 +1004,7 @@ U_BOOT_CMD( "mmc part - lists available partition on current mmc device\n" "mmc dev [dev] [part] - show or set current mmc device [partition]\n" "mmc list - lists available devices\n" - "mmc wp - power on write protect booot partitions\n" + "mmc wp - power on write protect boot partitions\n" #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) "mmc hwpartition [args...] - does hardware partitioning\n" " arguments (sizes in 512-byte blocks):\n" |