diff options
| author | Wolfgang Denk <wd@denx.de> | 2010-08-03 22:45:13 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2010-08-03 22:45:13 +0200 |
| commit | ac956293befb265b8958654d08c4ad52e605d46e (patch) | |
| tree | 4fbfc08b1be8616bc5ee2032b53996ac0c5d64d8 | |
| parent | e9aecdec153ae166739858e6a570432449b979f7 (diff) | |
| parent | 7385c28e9b5f7d47e6a8f1ad9800e6e70af714e2 (diff) | |
Merge branch 'master' of /home/wd/git/u-boot/master
183 files changed, 2369 insertions, 4449 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 45977983d4..4b91b0f804 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -262,10 +262,6 @@ Sangmoon Kim <dogoil@etinsys.com> debris MPC8245 KVME080 MPC8245 -Thomas Lange <thomas@corelatus.se> - - GTH MPC860 - Robert Lazarski <robertlazarski@gmail.com> ATUM8548 MPC8548 @@ -118,7 +118,6 @@ LIST_8xx=" \ GEN860T \ GEN860T_SC \ GENIETV \ - GTH \ hermes \ IAD210 \ ICU862_100MHz \ @@ -1495,6 +1495,16 @@ The following options need to be configured: #define I2C_DELAY udelay(2) + CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA + + If your arch supports the generic GPIO framework (asm/gpio.h), + then you may alternatively define the two GPIOs that are to be + used as SCL / SDA. Any of the previous I2C_xxx macros will + have GPIO-based defaults assigned to them as appropriate. + + You should define these to the GPIO value as given directly to + the generic GPIO functions. + CONFIG_SYS_I2C_INIT_BOARD When a board is reset during an i2c bus transfer diff --git a/arch/powerpc/cpu/mpc512x/diu.c b/arch/powerpc/cpu/mpc512x/diu.c index f638c00372..9ef5609f31 100644 --- a/arch/powerpc/cpu/mpc512x/diu.c +++ b/arch/powerpc/cpu/mpc512x/diu.c @@ -111,10 +111,8 @@ int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp, { unsigned int addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (!strncmp(argv[1], "init", 4)) { #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/arch/powerpc/cpu/mpc8260/bedbug_603e.c b/arch/powerpc/cpu/mpc8260/bedbug_603e.c index 248861289b..89193a348e 100644 --- a/arch/powerpc/cpu/mpc8260/bedbug_603e.c +++ b/arch/powerpc/cpu/mpc8260/bedbug_603e.c @@ -71,10 +71,7 @@ void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* -------------------------------------------------- */ if (argc < 2) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); /* Turn off a breakpoint */ @@ -118,10 +115,7 @@ void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc, if(!(( isdigit( argv[ 1 ][ 0 ] )) || (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) || (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' )))) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); addr = simple_strtoul( argv[ 1 ], NULL, 16 ); diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index 8dadd64b42..f8eab96b19 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -118,10 +118,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) writeback[0] = 0x01234567UL; writeback[1] = 0x89abcdefUL; - if (argc > 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 4) + return cmd_usage(cmdtp); if (argc == 2) { if (strcmp(argv[1], "status") == 0) { @@ -350,8 +348,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(ecc, 4, 0, do_ecc, diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 4ee0e9af8c..fe851f15db 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -58,7 +58,9 @@ COBJS-$(CONFIG_P1021) += ddr-gen3.o COBJS-$(CONFIG_P1022) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index fe2b52d860..f15d43c38c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -179,7 +179,7 @@ int checkcpu (void) #ifdef CONFIG_SYS_DPAA_FMAN for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { - printf(" FMAN%d: %s MHz\n", i, + printf(" FMAN%d: %s MHz\n", i + 1, strmhz(buf1, sysinfo.freqFMan[i])); } #endif diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index d491e2ad5a..5d5b4c2963 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -39,10 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MPC8536 -extern void fsl_serdes_init(void); -#endif - #ifdef CONFIG_QE extern qe_iop_conf_t qe_iop_conf_tab[]; extern void qe_config_iopin(u8 port, u8 pin, int dir, @@ -185,9 +181,6 @@ void cpu_init_f (void) /* Config QE ioports */ config_qe_ioports(); #endif -#if defined(CONFIG_MPC8536) - fsl_serdes_init(); -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif @@ -332,6 +325,11 @@ int cpu_init_r(void) qe_reset(); #endif +#if defined(CONFIG_SYS_HAS_SERDES) + /* needs to be in ram since code uses global static vars */ + fsl_serdes_init(); +#endif + #if defined(CONFIG_MP) setup_mp(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 2628cc5f95..932466e883 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -298,17 +298,17 @@ void fdt_add_enet_stashing(void *fdt) } #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) -static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq) +static void ft_fixup_clks(void *blob, const char *compat, u32 offset, + unsigned long freq) { - const char *path = fdt_get_alias(blob, alias); - - int off = fdt_path_offset(blob, path); + phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; + int off = fdt_node_offset_by_compat_reg(blob, compat, phys); if (off >= 0) { off = fdt_setprop_cell(blob, off, "clock-frequency", freq); if (off > 0) printf("WARNING enable to set clock-frequency " - "for %s: %s\n", alias, fdt_strerror(off)); + "for %s: %s\n", compat, fdt_strerror(off)); } } @@ -317,14 +317,17 @@ static void ft_fixup_dpaa_clks(void *blob) sys_info_t sysinfo; get_sys_info(&sysinfo); - ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]); + ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, + sysinfo.freqFMan[0]); #if (CONFIG_SYS_NUM_FMAN == 2) - ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]); + ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, + sysinfo.freqFMan[1]); #endif #ifdef CONFIG_SYS_DPAA_PME - ft_fixup_clks(blob, "pme", sysinfo.freqPME); + do_fixup_by_compat_u32(blob, "fsl,pme", + "clock-frequency", sysinfo.freqPME, 1); #endif } #else @@ -400,6 +403,11 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", bd->bi_brgfreq, 1); #endif +#ifdef CONFIG_FSL_CORENET + do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", + "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); +#endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #ifdef CONFIG_MP diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c index 7e72f5fb7c..6dadeb8cab 100644 --- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c @@ -66,10 +66,11 @@ #define FSL_SRDSCR3_LANEE_SGMII 0x00000000 #define FSL_SRDSCR3_LANEE_SATA 0x00150005 - #define SRDS1_MAX_LANES 8 #define SRDS2_MAX_LANES 2 +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, @@ -86,39 +87,12 @@ static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { int is_serdes_configured(enum srds_prtcl device) { - int i; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int ret = (1 << device) & serdes1_prtcl_map; - u32 srds2_cfg = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> - GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; - - debug("%s: dev = %d\n", __FUNCTION__, device); - debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg); - debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_cfg); - - if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg); - return 0; - } - - if (srds2_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { - printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_cfg); - return 0; - } - - for (i = 0; i < SRDS1_MAX_LANES; i++) { - if (serdes1_cfg_tbl[srds1_cfg][i] == device) - return 1; - } - for (i = 0; i < SRDS2_MAX_LANES; i++) { - if (serdes2_cfg_tbl[srds2_cfg][i] == device) - return 1; - } + if (ret) + return ret; - return 0; + return (1 << device) & serdes2_prtcl_map; } void fsl_serdes_init(void) @@ -126,13 +100,20 @@ void fsl_serdes_init(void) void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR; u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS); - u32 srds2_io_sel; + u32 srds1_io_sel, srds2_io_sel; u32 tmp; + int lane; + + srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; /* parse the SRDS2_IO_SEL of PORDEVSR */ srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL) >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT; + debug("PORDEVSR[SRDS1_IO_SEL] = %x\n", srds1_io_sel); + debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_io_sel); + switch (srds2_io_sel) { case 1: /* Lane A - SATA1, Lane E - SATA2 */ /* CR 0 */ @@ -246,4 +227,23 @@ void fsl_serdes_init(void) default: break; } + + if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_io_sel][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } } diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c index 6b0fbf200c..e4c9c22100 100644 --- a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c @@ -17,6 +17,8 @@ #define SRDS1_MAX_LANES 4 #define SRDS2_MAX_LANES 2 +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { [0x00] = {NONE, NONE, NONE, NONE}, [0x01] = {NONE, NONE, NONE, NONE}, @@ -73,26 +75,40 @@ static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { int is_serdes_configured(enum srds_prtcl device) { + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; u32 pordevsr = in_be32(&gur->pordevsr); u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> MPC85xx_PORDEVSR_IO_SEL_SHIFT; - unsigned int i; + int lane; - debug("%s: dev = %d\n", __FUNCTION__, device); - debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg); + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg); - return 0; + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); } - for (i = 0; i < SRDS1_MAX_LANES; i++) { - if (serdes1_cfg_tbl[srds_cfg][i] == device) - return 1; - if (serdes2_cfg_tbl[srds_cfg][i] == device) - return 1; + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; } - return 0; + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } } diff --git a/arch/powerpc/cpu/mpc8xx/bedbug_860.c b/arch/powerpc/cpu/mpc8xx/bedbug_860.c index 9deda6c2a0..83db035ab5 100644 --- a/arch/powerpc/cpu/mpc8xx/bedbug_860.c +++ b/arch/powerpc/cpu/mpc8xx/bedbug_860.c @@ -70,10 +70,7 @@ void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* -------------------------------------------------- */ if (argc < 2) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); /* Turn off a breakpoint */ @@ -121,10 +118,7 @@ void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc, /* Set a breakpoint at the address */ if( !isdigit( argv[ 1 ][ 0 ])) - { - cmd_usage(cmdtp); - return; - } + return cmd_usage(cmdtp); addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc; diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index eb0091bdb3..e97ae68c49 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -149,8 +149,7 @@ void cpu_init_f (volatile immap_t * immr) * I owe him a free beer. - wd] */ -#if defined(CONFIG_GTH) || \ - defined(CONFIG_HERMES) || \ +#if defined(CONFIG_HERMES) || \ defined(CONFIG_ICU862) || \ defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 22f3423723..dc3da1689f 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -80,10 +80,16 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), CPU_TYPE_ENTRY(P2020, P2020_E, 2), + CPU_TYPE_ENTRY(P3041, P3041, 4), + CPU_TYPE_ENTRY(P3041, P3041_E, 4), CPU_TYPE_ENTRY(P4040, P4040, 4), CPU_TYPE_ENTRY(P4040, P4040_E, 4), CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P4080, P4080_E, 8), + CPU_TYPE_ENTRY(P5010, P5010, 1), + CPU_TYPE_ENTRY(P5010, P5010_E, 1), + CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5020, P5020_E, 2), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 0f69ef97ee..2fee995690 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -767,6 +767,13 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal) debug("\n\n"); +#if defined(CONFIG_DDR_RFDC_FIXED) + mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED); + size = 512; + rffd_average = CONFIG_DDR_RFDC_FIXED & SDRAM_RFDC_RFFD_MASK; + mfsdram(SDRAM_RDCC, rdcc); /* record this value */ + cal->rdcc = rdcc; +#else /* CONFIG_DDR_RFDC_FIXED */ in_window = 0; rdcc = 0; @@ -830,6 +837,7 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal) rffd_average = SDRAM_RFDC_RFFD_MAX; mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); +#endif /* CONFIG_DDR_RFDC_FIXED */ rffd = rffd_average; in_window = 0; @@ -1211,10 +1219,14 @@ u32 DQS_autocalibration(void) debug("*** best_result: read value SDRAM_RQDC 0x%08x\n", rqdc_reg); +#if defined(CONFIG_DDR_RFDC_FIXED) + mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED); +#else /* CONFIG_DDR_RFDC_FIXED */ mfsdram(SDRAM_RFDC, rfdc_reg); rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd)); +#endif /* CONFIG_DDR_RFDC_FIXED */ mfsdram(SDRAM_RFDC, rfdc_reg); debug("*** best_result: read value SDRAM_RFDC 0x%08x\n", diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile index 88d53fbb1a..c9c1a331ff 100644 --- a/arch/powerpc/cpu/ppc4xx/Makefile +++ b/arch/powerpc/cpu/ppc4xx/Makefile @@ -51,6 +51,9 @@ COBJS += cpu_init.o COBJS += denali_data_eye.o COBJS += denali_spd_ddr2.o COBJS += ecc.o +ifdef CONFIG_CMD_ECCTEST +COBJS += cmd_ecctest.o +endif COBJS += fdt.o COBJS += interrupts.o COBJS += iop480_uart.o diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c new file mode 100644 index 0000000000..b4eac40574 --- /dev/null +++ b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2010 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/cache.h> + +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \ + defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) +#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) + +#if defined(CONFIG_405EX) +/* + * Currently only 405EX uses 16bit data bus width as an alternative + * option to 32bit data width (SDRAM0_MCOPT1_WDTH) + */ +#define SDRAM_DATA_ALT_WIDTH 2 +#else +#define SDRAM_DATA_ALT_WIDTH 8 +#endif + +#if defined(CONFIG_SYS_OCM_BASE) +#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_OCM_BASE +#endif + +#if defined(CONFIG_SYS_ISRAM_BASE) +#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_ISRAM_BASE +#endif + +#if !defined(CONFIG_FUNC_ISRAM_ADDR) +#error "No internal SRAM/OCM provided!" +#endif + +#define force_inline inline __attribute__ ((always_inline)) + +static inline void machine_check_disable(void) +{ + mtmsr(mfmsr() & ~MSR_ME); +} + +static inline void machine_check_enable(void) +{ + mtmsr(mfmsr() | MSR_ME); +} + +/* + * These helper functions need to be inlined, since they + * are called from the functions running from internal SRAM. + * SDRAM operation is forbidden at that time, so calling + * functions in SDRAM has to be avoided. + */ +static force_inline void wait_ddr_idle(void) +{ + u32 val; + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); +} + +static force_inline void recalibrate_ddr(void) +{ + u32 val; + + /* + * Rewrite RQDC & RFDC to calibrate again. If this is not + * done, the SDRAM controller is working correctly after + * changing the MCOPT1_MCHK bits. + */ + mfsdram(SDRAM_RQDC, val); + mtsdram(SDRAM_RQDC, val); + mfsdram(SDRAM_RFDC, val); + mtsdram(SDRAM_RFDC, val); +} + +static force_inline void set_mcopt1_mchk(u32 bits) +{ + u32 val; + + wait_ddr_idle(); + mfsdram(SDRAM_MCOPT1, val); + mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | bits); + recalibrate_ddr(); +} + +/* + * The next 2 functions are copied to internal SRAM/OCM and run + * there. No function calls allowed here. No SDRAM acitivity should + * be done here. + */ +static void inject_ecc_error(void *ptr, int par) +{ + u32 val; + + /* + * Taken from PPC460EX/EXr/GT users manual (Rev 1.21) + * 22.2.17.13 ECC Diagnostics + * + * Items 1 ... 5 are already done by now, running from RAM + * with ECC enabled + */ + + out_be32(ptr, 0x00000000); + val = in_be32(ptr); + + /* 6. Set memory controller to no error checking */ + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_NON); + + /* 7. Modify one or two bits for error simulation */ + if (par == 1) + out_be32(ptr, in_be32(ptr) ^ 0x00000001); + else + out_be32(ptr, in_be32(ptr) ^ 0x00000003); + + /* 8. Wait for SDRAM idle */ + val = in_be32(ptr); + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP); + + /* Wait for SDRAM idle */ + wait_ddr_idle(); + + /* Continue with 9. in calling function... */ +} + +static void rewrite_ecc_parity(void *ptr, int par) +{ + u32 current_address = (u32)ptr; + u32 end_address; + u32 address_increment; + u32 mcopt1; + u32 val; + + /* + * Fill ECC parity byte again. Otherwise further accesses to + * the failure address will result in exceptions. + */ + + /* Wait for SDRAM idle */ + val = in_be32(0x00000000); + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_GEN); + + /* ECC bit set method for non-cached memory */ + mfsdram(SDRAM_MCOPT1, mcopt1); + if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) + address_increment = 4; + else + address_increment = SDRAM_DATA_ALT_WIDTH; + end_address = current_address + CONFIG_SYS_CACHELINE_SIZE; + + while (current_address < end_address) { + *((unsigned long *)current_address) = 0; + current_address += address_increment; + } + + set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP); + + /* Wait for SDRAM idle */ + wait_ddr_idle(); +} + +static int do_ecctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 old_val; + u32 val; + u32 *ptr; + void (*sram_func)(u32 *, int); + int error; + + if (argc < 3) { + cmd_usage(cmdtp); + return 1; + } + + ptr = (u32 *)simple_strtoul(argv[1], NULL, 16); + error = simple_strtoul(argv[2], NULL, 16); + if ((error < 1) || (error > 2)) { + cmd_usage(cmdtp); + return 1; + } + + printf("Using address %p for %d bit ECC error injection\n", + ptr, error); + + /* + * Save value to restore it later on + */ + old_val = in_be32(ptr); + + /* + * Copy ECC injection function into internal SRAM/OCM + */ + sram_func = (void *)CONFIG_FUNC_ISRAM_ADDR; + memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, inject_ecc_error, 0x10000); + + /* + * Disable interrupts and exceptions before calling this + * function in internal SRAM/OCM + */ + disable_interrupts(); + machine_check_disable(); + eieio(); + + /* + * Jump to ECC simulation function in internal SRAM/OCM + */ + (*sram_func)(ptr, error); + + /* 10. Read the corresponding address */ + val = in_be32(ptr); + + /* + * Read and print ECC status register/info: + * The faulting address is only known upon uncorrectable ECC + * errors. + */ + mfsdram(SDRAM_ECCES, val); + if (val & SDRAM_ECCES_CE) + printf("ECC: Correctable error\n"); + if (val & SDRAM_ECCES_UE) { + printf("ECC: Uncorrectable error at 0x%02x%08x\n", + mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL)); + } + + /* + * Clear pending interrupts/exceptions + */ + mtsdram(SDRAM_ECCES, 0xffffffff); + mtdcr(SDRAM_ERRSTATLL, 0xff000000); + set_mcsr(get_mcsr()); + + /* Now enable interrupts and exceptions again */ + eieio(); + machine_check_enable(); + enable_interrupts(); + + /* + * The ECC parity byte need to be re-written for the + * corresponding address. Otherwise future accesses to it + * will result in exceptions. + * + * Jump to ECC parity generation function + */ + memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, rewrite_ecc_parity, 0x10000); + (*sram_func)(ptr, 0); + + /* + * Restore value in corresponding address + */ + out_be32(ptr, old_val); + + return 0; +} + +U_BOOT_CMD( + ecctest, 3, 0, do_ecctest, + "Test ECC by single and double error bit injection", + "address 1/2" +); + +#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */ +#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */ diff --git a/arch/powerpc/cpu/ppc4xx/ecc.c b/arch/powerpc/cpu/ppc4xx/ecc.c index f105605459..49f28d93e0 100644 --- a/arch/powerpc/cpu/ppc4xx/ecc.c +++ b/arch/powerpc/cpu/ppc4xx/ecc.c @@ -130,7 +130,26 @@ static void program_ecc_addr(unsigned long start_address, /* clear ECC error repoting registers */ mtsdram(SDRAM_ECCES, 0xffffffff); - mtdcr(0x4c, 0xffffffff); +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) + /* + * IBM DDR(1) core (440GX): + * Clear Mx bits in SDRAM0_BESR0/1 + */ + mtsdram(SDRAM0_BESR0, 0xffffffff); + mtsdram(SDRAM0_BESR1, 0xffffffff); +#elif defined(CONFIG_440) + /* + * 440/460 DDR2 core: + * Clear EMID (Error PLB Master ID) in MQ0_ESL + */ + mtdcr(SDRAM_ERRSTATLL, 0xfff00000); +#else + /* + * 405EX(r) DDR2 core: + * Clear M0ID (Error PLB Master ID) in SDRAM_BESR + */ + mtsdram(SDRAM_BESR, 0xf0000000); +#endif mtsdram(SDRAM_MCOPT1, (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP); diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c index 1616772f0f..b5562ad978 100644 --- a/arch/powerpc/cpu/ppc4xx/traps.c +++ b/arch/powerpc/cpu/ppc4xx/traps.c @@ -209,6 +209,22 @@ MachineCheckException(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, val); } + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) + /* + * Read and print ECC status register/info: + * The faulting address is only known upon uncorrectable ECC + * errors. + */ + mfsdram(SDRAM_ECCES, val); + if (val & SDRAM_ECCES_CE) + printf("ECC: Correctable error\n"); + if (val & SDRAM_ECCES_UE) { + printf("ECC: Uncorrectable error at 0x%02x%08x\n", + mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL)); + } +#endif /* CONFIG_DDR_ECC ... */ + #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) mfsdram(DDR0_00, val) ; printf("DDR0: DDR0_00 %lx\n", val); diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index d88c282f75..f70699de27 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -44,8 +44,12 @@ defined(CONFIG_P1021) || defined(CONFIG_P1022) || \ defined(CONFIG_P2020) || defined(CONFIG_MPC8641) #define CONFIG_MAX_CPUS 2 +#elif defined(CONFIG_PPC_P3041) +#define CONFIG_MAX_CPUS 4 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 +#elif defined(CONFIG_PPC_P5020) +#define CONFIG_MAX_CPUS 2 #else #define CONFIG_MAX_CPUS 1 #endif diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index bb875435d3..dc5c579e1a 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -29,8 +29,8 @@ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data); void fsl_pci_config_unlock(struct pci_controller *hose); -void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose); +void ft_fsl_pci_setup(void *blob, const char *pci_compat, + struct pci_controller *hose, unsigned long ctrl_addr); /* * Common PCI/PCIE Register structure for mpc85xx and mpc86xx @@ -202,4 +202,82 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, x.pci_num = num; \ } +#define __FT_FSL_PCI_SETUP(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, &pci##num##_hose, \ + CONFIG_SYS_PCI##num##_ADDR) + +#define __FT_FSL_PCI_DEL(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCI##num##_ADDR) + +#define __FT_FSL_PCIE_SETUP(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, &pcie##num##_hose, \ + CONFIG_SYS_PCIE##num##_ADDR) + +#define __FT_FSL_PCIE_DEL(blob, compat, num) \ + ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCIE##num##_ADDR) + +#ifdef CONFIG_PCI1 +#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 1) +#else +#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 1) +#endif + +#ifdef CONFIG_PCI2 +#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 2) +#else +#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 2) +#endif + +#ifdef CONFIG_PCIE1 +#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 1) +#else +#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 1) +#endif + +#ifdef CONFIG_PCIE2 +#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 2) +#else +#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 2) +#endif + +#ifdef CONFIG_PCIE3 +#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3) +#else +#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 3) +#endif + +#ifdef CONFIG_PCIE4 +#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4) +#else +#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 4) +#endif + +#if defined(CONFIG_FSL_CORENET) +#define FSL_PCIE_COMPAT "fsl,p4080-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; \ + FT_FSL_PCIE3_SETUP; \ + FT_FSL_PCIE4_SETUP; +#elif defined(CONFIG_MPC85xx) +#define FSL_PCI_COMPAT "fsl,mpc8540-pci" +#define FSL_PCIE_COMPAT "fsl,mpc8548-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCI1_SETUP; \ + FT_FSL_PCI2_SETUP; \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; \ + FT_FSL_PCIE3_SETUP; +#elif defined(CONFIG_MPC86xx) +#define FSL_PCI_COMPAT "fsl,mpc8610-pci" +#define FSL_PCIE_COMPAT "fsl,mpc8641-pcie" +#define FT_FSL_PCI_SETUP \ + FT_FSL_PCI1_SETUP; \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; +#else +#error FT_FSL_PCI_SETUP not defined +#endif + + #endif diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index d4839f4673..c7877b91a1 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -44,5 +44,6 @@ enum srds_prtcl { }; int is_serdes_configured(enum srds_prtcl device); +void fsl_serdes_init(void); #endif /* __FSL_SERDES_H */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 4e665d3994..b1d219b7aa 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2060,8 +2060,17 @@ typedef struct ccsr_sec { #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000 +#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000 +#define CONFIG_SYS_MPC85xx_PCI2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000 +#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020) +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000 +#else +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000 +#endif #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 @@ -2138,6 +2147,17 @@ typedef struct ccsr_sec { #define CONFIG_SYS_FSL_SEC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) +#define CONFIG_SYS_PCI1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) +#define CONFIG_SYS_PCI2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET) +#define CONFIG_SYS_PCIE1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET) +#define CONFIG_SYS_PCIE2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET) +#define CONFIG_SYS_PCIE3_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET) + #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index b9e02dbc79..4bebb68565 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -1257,6 +1257,23 @@ extern immap_t *immr; #define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000) #define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) +#define CONFIG_SYS_MPC86xx_PCI1_OFFSET 0x8000 +#ifdef CONFIG_MPC8610 +#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0xa000 +#else +#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0x8000 +#endif +#define CONFIG_SYS_MPC86xx_PCIE2_OFFSET 0x9000 + +#define CONFIG_SYS_PCI1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI1_OFFSET) +#define CONFIG_SYS_PCI2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI2_OFFSET) +#define CONFIG_SYS_PCIE1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE1_OFFSET) +#define CONFIG_SYS_PCIE2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE2_OFFSET) + #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h index d9506e27c1..4ec1ef866a 100644 --- a/arch/powerpc/include/asm/ppc4xx-sdram.h +++ b/arch/powerpc/include/asm/ppc4xx-sdram.h @@ -63,6 +63,8 @@ #define SDRAM_CFG0 0x20 /* memory controller options 0 */ #define SDRAM_CFG1 0x21 /* memory controller options 1 */ +#define SDRAM0_BESR0 0x0000 /* bus error status reg 0 */ +#define SDRAM0_BESR1 0x0008 /* bus error status reg 1 */ #define SDRAM0_BEAR 0x0010 /* bus error address reg */ #define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */ #define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */ @@ -363,6 +365,7 @@ /* * Memory controller registers */ +#ifdef CONFIG_405EX #define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */ #define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */ #define SDRAM_BEARL 0x02 /* PLB bus error address low */ @@ -371,11 +374,10 @@ #define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */ #define SDRAM_PLBOPT 0x08 /* PLB slave options */ #define SDRAM_PUABA 0x09 /* PLB upper address base */ -#ifndef CONFIG_405EX -#define SDRAM_MCSTAT 0x14 /* memory controller status */ -#else #define SDRAM_MCSTAT 0x1F /* memory controller status */ -#endif +#else /* CONFIG_405EX */ +#define SDRAM_MCSTAT 0x14 /* memory controller status */ +#endif /* CONFIG_405EX */ #define SDRAM_MCOPT1 0x20 /* memory controller options 1 */ #define SDRAM_MCOPT2 0x21 /* memory controller options 2 */ #define SDRAM_MODT0 0x22 /* on die termination for bank 0 */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 844552c2d2..89f283a6c5 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1052,10 +1052,16 @@ #define SVR_P2010_E 0x80EB00 #define SVR_P2020 0x80E200 #define SVR_P2020_E 0x80EA00 +#define SVR_P3041 0x821103 +#define SVR_P3041_E 0x821903 #define SVR_P4040 0x820100 #define SVR_P4040_E 0x820900 #define SVR_P4080 0x820000 #define SVR_P4080_E 0x820800 +#define SVR_P5010 0x822100 +#define SVR_P5010_E 0x822900 +#define SVR_P5020 0x822000 +#define SVR_P5020_E 0x822800 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index 86f86e2b18..6936e51040 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -44,10 +44,8 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ u8 *buf; int cpu_freq; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); cpu_freq = simple_strtol(argv[1], NULL, 10); if (cpu_freq != 267) { diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 23874d2667..158f7bb272 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -34,7 +34,17 @@ extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH ch DECLARE_GLOBAL_DATA_PTR; -#define CONFIG_SYS_BCSR3_PCIE 0x10 + struct board_bcsr { + u8 board_id; + u8 cpld_rev; + u8 led_user; + u8 board_status; + u8 reset_ctrl; + u8 flash_ctrl; + u8 eth_ctrl; + u8 usb_ctrl; + u8 irq_ctrl; +}; #define BOARD_CANYONLANDS_PCIE 1 #define BOARD_CANYONLANDS_SATA 2 @@ -112,6 +122,9 @@ int board_early_init_f(void) { #if !defined(CONFIG_ARCHES) u32 sdr0_cust0; + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + #endif /* @@ -172,14 +185,10 @@ int board_early_init_f(void) #if !defined(CONFIG_ARCHES) /* Enable ethernet and take out of reset */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0); + out_8(&bcsr_data->eth_ctrl, 0) ; /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0); - - /* Enable USB host & USB-OTG */ - out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0); - + out_8(&bcsr_data->flash_ctrl, 0) ; mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */ /* Setup PLB4-AHB bridge based on the system address map */ @@ -201,6 +210,41 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) +int usb_board_init(void) +{ + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + u8 val; + + /* Enable USB host & USB-OTG */ + val = in_8(&bcsr_data->usb_ctrl); + val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); + out_8(&bcsr_data->usb_ctrl, val); + + return 0; +} + +int usb_board_stop(void) +{ + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; + u8 val; + + /* Disable USB host & USB-OTG */ + val = in_8(&bcsr_data->usb_ctrl); + val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); + out_8(&bcsr_data->usb_ctrl, val); + + return 0; +} + +int usb_board_init_fail(void) +{ + return usb_board_stop(); +} +#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */ + #if !defined(CONFIG_ARCHES) static void canyonlands_sata_init(int board_type) { @@ -244,11 +288,13 @@ int get_cpu_num(void) #if !defined(CONFIG_ARCHES) int checkboard(void) { + struct board_bcsr *bcsr_data = + (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; char *s = getenv("serial#"); if (pvr_460ex()) { printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); - if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE) + if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE) gd->board_type = BOARD_CANYONLANDS_PCIE; else gd->board_type = BOARD_CANYONLANDS_SATA; @@ -268,7 +314,7 @@ int checkboard(void) break; } - printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0))); + printf(", Rev. %X", in_8(&bcsr_data->cpld_rev)); if (s != NULL) { puts(", serial# "); diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index c0368c0389..c09d730888 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -223,8 +223,7 @@ int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) l2cache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 3c0dc5f896..7f75ad7dee 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -182,14 +182,14 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char c = '\0'; pll_freq_t pll_freq; - if (argc < 2) { - cmd_usage(cmdtp); - goto ret; - } - for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) + if (argc < 2) + return cmd_usage(cmdtp); + + for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) { if (!strcmp(pll_name[pll_freq], argv[1])) break; + } switch (pll_freq) { case PLL_ebc20: @@ -223,8 +223,7 @@ do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: printf("Invalid options\n\n"); - cmd_usage(cmdtp); - goto ret; + return cmd_usage(cmdtp); } printf("PLL set to %s, " diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 595dee3fcc..9b2afdabca 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -139,10 +139,9 @@ static int do_lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char * const arg static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_puts(argv[1]); return 0; @@ -150,10 +149,9 @@ static int do_lcd_puts (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv static int do_lcd_putc (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_putc((char)argv[1][0]); return 0; @@ -165,10 +163,8 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[ ulong dir; char cur_addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); count = simple_strtoul(argv[1], NULL, 16); if (count > 31) { diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 1682cf7c6a..dd2aba546c 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -101,16 +101,12 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[ { int led_no; - if (argc != 3) { - cmd_usage(cmd_tp); - return -1; - } + if (argc != 3) + return cmd_usage(cmd_tp); led_no = simple_strtoul(argv[1], NULL, 16); - if (led_no != 1 && led_no != 2) { - cmd_usage(cmd_tp); - return -1; - } + if (led_no != 1 && led_no != 2) + return cmd_usage(cmd_tp); if (strcmp(argv[2],"off") == 0x0) { if (led_no == 1) @@ -123,8 +119,7 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[ else gpio_write_bit(31, 0); } else { - cmd_usage(cmd_tp); - return -1; + return cmd_usage(cmd_tp); } return 0; diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index 6a049dfbad..7f7730a81d 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -166,19 +166,17 @@ static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv } static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_puts(argv[1]); return 0; } static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + lcd_putc((char)argv[1][0]); return 0; } @@ -188,10 +186,8 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[] ulong dir; char cur_addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); count = simple_strtoul(argv[1], NULL, 16); if (count > 31) { diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index cde13e424b..e9cd333f3a 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -58,10 +58,8 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, char plbClock[4]; char pcixClock[4]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[2], "prom0") == 0) chip = IIC0_BOOTPROM_ADDR; diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 4f7d935df3..671f9e9853 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -292,14 +292,6 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/barco/barco.c b/board/barco/barco.c index b8d968b915..6ce3480782 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -290,12 +290,6 @@ void barcobcd_boot (void) int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { -#if 0 - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } -#endif barcobcd_boot (); return 0; diff --git a/board/digsy_mtc/cmd_mtc.c b/board/digsy_mtc/cmd_mtc.c index 621980dfce..ba0c36770e 100644 --- a/board/digsy_mtc/cmd_mtc.c +++ b/board/digsy_mtc/cmd_mtc.c @@ -75,10 +75,8 @@ static int do_mtc_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int err; int i; - if (argc < 2) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 2) + return cmd_usage(cmdtp); memset(&pcmd, 0, sizeof(pcmd)); memset(&prx, 0, sizeof(prx)); @@ -149,10 +147,8 @@ static int do_mtc_digout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv int err; uchar channel_mask = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strncmp(argv[1], "on", 2) == 0) channel_mask |= 1; @@ -178,10 +174,8 @@ static int do_mtc_digin(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ int err; uchar channel_num = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 2) + return cmd_usage(cmdtp); channel_num = simple_strtol(argv[1], NULL, 10); if ((channel_num != 1) && (channel_num != 2)) { @@ -332,8 +326,7 @@ int cmd_mtc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return c->cmd(c, flag, argc, argv); } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return err; diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 9109b64a1c..3dfbf3bc91 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -345,10 +345,8 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_VIDEO_SM501 char *str; #endif - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index aa7437695e..4946538f4b 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -221,9 +221,7 @@ int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc, return 0; } - cmd_usage(cmdtp); - return 1; - + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 5a8f4f5810..3929ad0aac 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -351,8 +351,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) prog_eeprom(); break; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return 0; @@ -388,8 +387,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; case 'h': /* help */ default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return 0; diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 50ca3cae9f..c8e08563b6 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -396,26 +396,8 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#else - ft_fsl_pci_setup(blob, "pci0", NULL); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#else - ft_fsl_pci_setup(blob, "pci1", NULL); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#else - ft_fsl_pci_setup(blob, "pci2", NULL); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci3", &pcie3_hose); -#else - ft_fsl_pci_setup(blob, "pci3", NULL); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 581d5f26ed..da3a2b6eec 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -360,19 +360,8 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + FT_FSL_PCI_SETUP; -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci3", &pcie2_hose); -#endif #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index f0169959af..23e552bde7 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc. + * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -388,11 +388,6 @@ int last_stage_init(void) #if defined(CONFIG_OF_BOARD_SETUP) void ft_pci_setup(void *blob, bd_t *bd) { -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 036bf9528b..bd859e4ee4 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -426,11 +426,6 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 81e8ff51e9..01b7dcb70c 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor. + * Copyright 2009-2010 Freescale Semiconductor. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * @@ -635,9 +635,8 @@ void ft_board_setup(void *blob, bd_t *bd) #endif ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + fdt_board_fixup_esdhc(blob, bd); fdt_board_fixup_qe_uart(blob, bd); fdt_board_fixup_qe_usb(blob, bd); diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 81d481a171..6b96dfc165 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -345,15 +345,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 2ef7b2323d..6578f58dbf 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -309,15 +309,7 @@ ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci2", &pcie2_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 0b7f787e5d..781a7c8745 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -115,10 +115,8 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp, { unsigned int addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (!strncmp(argv[1],"init",4)) { #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c index bd357b8667..8c8ce9585a 100644 --- a/board/freescale/mpc8641hpcn/law.c +++ b/board/freescale/mpc8641hpcn/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -32,14 +32,14 @@ * * 0x0000_0000 0x7fff_ffff DDR 2G * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M + * 0x8000_0000 0x9fff_ffff PCIE1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIE2 MEM 512M * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT) * 0x8000_0000 0x9fff_ffff RapidIO 512M * endif * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT) - * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K - * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K + * 0xffc0_0000 0xffc0_ffff PCIE1 IO 64K + * 0xffc1_0000 0xffc1_ffff PCIE2 IO 64K * 0xffe0_0000 0xffef_ffff CCSRBAR 1M * 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K * 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M @@ -54,10 +54,10 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), #endif #ifdef CONFIG_PCI - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), #elif defined(CONFIG_RIO) SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), #endif diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index b352c334cf..d86ca12aaf 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2007 Freescale Semiconductor. + * Copyright 2006, 2007, 2010 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -129,21 +129,21 @@ fixed_sdram(void) #if defined(CONFIG_PCI) -static struct pci_controller pci1_hose; +static struct pci_controller pcie1_hose; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif /* CONFIG_PCIE2 */ int first_free_busno = 0; void pci_init_board(void) { -#ifdef CONFIG_PCI1 +#ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + struct pci_controller *hose = &pcie1_hose; struct pci_region *r = hose->regions; volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -169,16 +169,16 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, + CONFIG_SYS_PCIE1_MEM_BUS, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BUS, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, + CONFIG_SYS_PCIE1_IO_BUS, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -195,8 +195,8 @@ void pci_init_board(void) * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ - in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT - + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000))); + in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT + + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000))); } else { puts("PCI-EXPRESS 1: Disabled\n"); @@ -204,26 +204,26 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ +#endif /* CONFIG_PCIE1 */ -#ifdef CONFIG_PCI2 +#ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - struct pci_controller *hose = &pci2_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + struct pci_controller *hose = &pcie2_hose; struct pci_region *r = hose->regions; /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI2_MEM_BUS, - CONFIG_SYS_PCI2_MEM_PHYS, - CONFIG_SYS_PCI2_MEM_SIZE, + CONFIG_SYS_PCIE2_MEM_BUS, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI2_IO_BUS, - CONFIG_SYS_PCI2_IO_PHYS, - CONFIG_SYS_PCI2_IO_SIZE, + CONFIG_SYS_PCIE2_IO_BUS, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -238,7 +238,7 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ +#endif /* CONFIG_PCIE2 */ } @@ -253,12 +253,7 @@ ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif + FT_FSL_PCI_SETUP; /* * Warn if it looks like the device tree doesn't match u-boot. diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index be692cb458..5cdee9ff70 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -322,23 +322,7 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci0", &pcie1_hose); -#else - ft_fsl_pci_setup(blob, "pci0", NULL); -#endif - -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#else - ft_fsl_pci_setup(blob, "pci1", NULL); -#endif - -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); -#else - ft_fsl_pci_setup(blob, "pci2", NULL); -#endif + FT_FSL_PCI_SETUP; #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index aa2f64ca91..97d4f834b0 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -100,16 +100,5 @@ void pci_init_board(void) void ft_pci_board_setup(void *blob) { -/* According to h/w manual, PCIE2 is at lower address(0x9000) - * than PCIE1(0xa000). - * Hence PCIE2 is made to occupy the pci1 position in dts to - * keep the addresses sorted there. - * Generally the case with all FSL SOCs. - */ -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index be4b2eb478..3fd1b347ab 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -366,15 +366,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; + #ifdef CONFIG_FSL_SGMII_RISER fsl_sgmii_riser_fdt_fixup(blob); #endif diff --git a/board/gth/Makefile b/board/gth/Makefile deleted file mode 100644 index 4b5c528a04..0000000000 --- a/board/gth/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/gth/README b/board/gth/README deleted file mode 100644 index 241c70b69b..0000000000 --- a/board/gth/README +++ /dev/null @@ -1,18 +0,0 @@ -Written by Thomas.Lange@corelatus.com 010805 - -To make a system for gth that actually works ;-) -the variable TBASE needs to be set to 0,1 or 2 -depending on location where image is supposed to -be started from. -E.g. make TBASE=1 - -0: Start from RAM, base 0 - -1: Start from flash_base + 0x10070 - -2: Start from flash_base + 0x30070 - -When using 1 or 2, the image is supposed to be launched -from miniboot that boots the first U-Boot image found in -flash. -For miniboot code, description, see www.opensource.se diff --git a/board/gth/config.mk b/board/gth/config.mk deleted file mode 100644 index 3c80156c3f..0000000000 --- a/board/gth/config.mk +++ /dev/null @@ -1,40 +0,0 @@ -# -# (C) Copyright 2000, 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -ifeq ($(TBASE),0) -TEXT_BASE = 0 -else -ifeq ($(TBASE),1) -TEXT_BASE = 0x80010070 -else -ifeq ($(TBASE),2) -TEXT_BASE = 0x80030070 -else -## Only to make ordinary make work -TEXT_BASE = 0x90000000 -endif -endif -endif - -OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c deleted file mode 100644 index 2a33a0edd9..0000000000 --- a/board/gth/ee_access.c +++ /dev/null @@ -1,335 +0,0 @@ -/* Module for handling DALLAS DS2438, smart battery monitor - Chip can store up to 40 bytes of user data in EEPROM, - perform temp, voltage and current measurements. - Chip also contains a unique serial number. - - Always read/write LSb first - - For documentaion, see data sheet for DS2438, 2438.pdf - - By Thomas.Lange@corelatus.com 001025 */ - -#include <common.h> -#include <config.h> -#include <mpc8xx.h> - -#include <../board/gth/ee_dev.h> - -/* We dont have kernel functions */ -#define printk printf -#define KERN_DEBUG -#define KERN_ERR -#define EIO 1 - -static int Debug = 0; - -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - -/* - * lookup table ripped from DS app note 17, understanding and using - * cyclic redundancy checks... - */ - -static u8 crc_lookup[256] = { - 0, 94, 188, 226, 97, 63, 221, 131, - 194, 156, 126, 32, 163, 253, 31, 65, - 157, 195, 33, 127, 252, 162, 64, 30, - 95, 1, 227, 189, 62, 96, 130, 220, - 35, 125, 159, 193, 66, 28, 254, 160, - 225, 191, 93, 3, 128, 222, 60, 98, - 190, 224, 2, 92, 223, 129, 99, 61, - 124, 34, 192, 158, 29, 67, 161, 255, - 70, 24, 250, 164, 39, 121, 155, 197, - 132, 218, 56, 102, 229, 187, 89, 7, - 219, 133, 103, 57, 186, 228, 6, 88, - 25, 71, 165, 251, 120, 38, 196, 154, - 101, 59, 217, 135, 4, 90, 184, 230, - 167, 249, 27, 69, 198, 152, 122, 36, - 248, 166, 68, 26, 153, 199, 37, 123, - 58, 100, 134, 216, 91, 5, 231, 185, - 140, 210, 48, 110, 237, 179, 81, 15, - 78, 16, 242, 172, 47, 113, 147, 205, - 17, 79, 173, 243, 112, 46, 204, 146, - 211, 141, 111, 49, 178, 236, 14, 80, - 175, 241, 19, 77, 206, 144, 114, 44, - 109, 51, 209, 143, 12, 82, 176, 238, - 50, 108, 142, 208, 83, 13, 239, 177, - 240, 174, 76, 18, 145, 207, 45, 115, - 202, 148, 118, 40, 171, 245, 23, 73, - 8, 86, 180, 234, 105, 55, 213, 139, - 87, 9, 235, 181, 54, 104, 138, 212, - 149, 203, 41, 119, 244, 170, 72, 22, - 233, 183, 85, 11, 136, 214, 52, 106, - 43, 117, 151, 201, 74, 20, 246, 168, - 116, 42, 200, 150, 21, 75, 169, 247, - 182, 232, 10, 84, 215, 137, 107, 53 -}; - -static u8 make_new_crc( u8 Old_crc, u8 New_value ){ - /* Compute a new checksum with new byte, using previous checksum as input - See DS app note 17, understanding and using cyclic redundancy checks... - Also see DS2438, page 11 */ - return( crc_lookup[Old_crc ^ New_value ]); -} - -int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){ - /* Check if the checksum for this buffer is correct */ - u8 Curr_crc=0; - int i; - u8 *Curr_byte = Buffer; - - for(i=0;i<Len;i++){ - Curr_crc = make_new_crc( Curr_crc, *Curr_byte); - Curr_byte++; - } - E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc); - - if(Curr_crc == Crc){ - /* Good */ - return(TRUE); - } - printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", - Curr_crc, Crc); - return(FALSE); -} - -static void -set_idle(void){ - /* Send idle and keep start time - Continous 1 is idle */ - WRITE_PORT(1); -} - -static int -do_reset(void){ - /* Release reset and verify that chip responds with presence pulse */ - int Retries = 0; - while(Retries<5){ - udelay(RESET_LOW_TIME); - - /* Send reset */ - WRITE_PORT(0); - udelay(RESET_LOW_TIME); - - /* Release reset */ - WRITE_PORT(1); - - /* Wait for EEPROM to drive output */ - udelay(PRESENCE_TIMEOUT); - if(!READ_PORT){ - /* Ok, EEPROM is driving a 0 */ - E_DEBUG("Presence detected\n"); - if(Retries){ - E_DEBUG("Retries %d\n",Retries); - } - /* Make sure chip releases pin */ - udelay(PRESENCE_LOW_TIME); - return 0; - } - Retries++; - } - - printk(KERN_ERR"EEPROM did not respond when releasing reset\n"); - - /* Make sure chip releases pin */ - udelay(PRESENCE_LOW_TIME); - - /* Set to idle again */ - set_idle(); - - return(-EIO); -} - -static u8 -read_byte(void){ - /* Read a single byte from EEPROM - Read LSb first */ - int i; - int Value; - u8 Result=0; -#ifndef CONFIG_SYS_IMMR - u32 Flags; -#endif - - E_DEBUG("Reading byte\n"); - - for(i=0;i<8;i++){ - /* Small delay between pulses */ - udelay(1); - -#ifndef CONFIG_SYS_IMMR - /* Disable irq */ - save_flags(Flags); - cli(); -#endif - - /* Pull down pin short time to start read - See page 26 in data sheet */ - - WRITE_PORT(0); - udelay(READ_LOW); - WRITE_PORT(1); - - /* Wait for chip to drive pin */ - udelay(READ_TIMEOUT); - - Value = READ_PORT; - if(Value) - Value=1; - -#ifndef CONFIG_SYS_IMMR - /* Enable irq */ - restore_flags(Flags); -#endif - - /* Wait for chip to release pin */ - udelay(TOTAL_READ_LOW-READ_TIMEOUT); - - /* LSb first */ - Result|=Value<<i; - } - - E_DEBUG("Read byte 0x%x\n",Result); - - return(Result); -} - -static void -write_byte(u8 Byte){ - /* Write a single byte to EEPROM - Write LSb first */ - int i; - int Value; -#ifndef CONFIG_SYS_IMMR - u32 Flags; -#endif - - E_DEBUG("Writing byte 0x%x\n",Byte); - - for(i=0;i<8;i++){ - /* Small delay between pulses */ - udelay(1); - Value = Byte&1; - -#ifndef CONFIG_SYS_IMMR - /* Disable irq */ - save_flags(Flags); - cli(); -#endif - - /* Pull down pin short time for a 1, long time for a 0 - See page 26 in data sheet */ - - WRITE_PORT(0); - if(Value){ - /* Write a 1 */ - udelay(WRITE_1_LOW); - } - else{ - /* Write a 0 */ - udelay(WRITE_0_LOW); - } - - WRITE_PORT(1); - -#ifndef CONFIG_SYS_IMMR - /* Enable irq */ - restore_flags(Flags); -#endif - - if(Value) - /* Wait for chip to read the 1 */ - udelay(TOTAL_WRITE_LOW-WRITE_1_LOW); - Byte>>=1; - } -} - -int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){ - /* Execute this command string, including - giving reset and setting to idle after command - if Rx_len is set, we read out data from EEPROM */ - int i; - - E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len ); - - if(do_reset()){ - /* Failed! */ - return(-EIO); - } - - if(Send_skip) - /* Always send SKIP_ROM first to tell chip we are sending a command, - except when we read out rom data for chip */ - write_byte(SKIP_ROM); - - /* Always have Tx data */ - for(i=0;i<Tx_len;i++){ - write_byte(Tx[i]); - } - - if(Rx_len){ - for(i=0;i<Rx_len;i++){ - Rx[i]=read_byte(); - } - } - - set_idle(); - - E_DEBUG("Command done\n"); - - return(0); -} - -int ee_init_data(void){ - int i; - u8 Tx[10]; - int tmp; - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - - while(0){ - tmp = 1-tmp; - if(tmp) - immap->im_ioport.iop_padat &= ~PA_FRONT_LED; - else - immap->im_ioport.iop_padat |= PA_FRONT_LED; - udelay(1); - } - - /* Set port to open drain to be able to read data from - port without setting it to input */ - PORT_B_PAR &= ~PB_EEPROM; - PORT_B_ODR |= PB_EEPROM; - SET_PORT_B_OUTPUT(PB_EEPROM); - - /* Set idle mode */ - set_idle(); - - /* Copy all User EEPROM data to scratchpad */ - for(i=0;i<USER_PAGES;i++){ - Tx[0]=RECALL_MEMORY; - Tx[1]=EE_USER_PAGE_0+i; - if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO); - } - - /* Make sure chip doesnt store measurements in NVRAM */ - Tx[0]=WRITE_SCRATCHPAD; - Tx[1]=0; /* Page */ - Tx[2]=9; - if(ee_do_command(Tx,3,NULL,0,TRUE)) return(-EIO); - - Tx[0]=COPY_SCRATCHPAD; - if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO); - - /* FIXME check status bit instead - Could take 10 ms to store in EEPROM */ - for(i=0;i<10;i++){ - udelay(1000); - } - - return(0); -} diff --git a/board/gth/ee_access.h b/board/gth/ee_access.h deleted file mode 100644 index e847f2c58b..0000000000 --- a/board/gth/ee_access.h +++ /dev/null @@ -1,16 +0,0 @@ -/* By Thomas.Lange@Corelatus.com 001025 - - Definitions for EEPROM/VOLT METER DS2438 */ - -#ifndef INCeeaccessh -#define INCeeaccessh - -int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ); -int ee_init_data(void); -int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ); - -#ifndef TRUE -#define TRUE 1 -#endif - -#endif /* INCeeaccessh */ diff --git a/board/gth/ee_dev.h b/board/gth/ee_dev.h deleted file mode 100644 index 3004b46610..0000000000 --- a/board/gth/ee_dev.h +++ /dev/null @@ -1,85 +0,0 @@ -/* By Thomas.Lange@Corelatus.com 001025 - $Revision: 1.6 $ - - Definitions for EEPROM/VOLT METER DS2438 - Copyright (C) 2000-2001 Corelatus AB */ - -#ifndef INCeedevh -#define INCeedevh - -#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args) - -#define PORT_B_PAR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar -#define PORT_B_ODR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr -#define PORT_B_DIR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir -#define PORT_B_DAT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat - -#define SET_PORT_B_INPUT(Mask) PORT_B_DIR &= ~(Mask) -#define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask - -#define WRITE_PORT_B(Mask,Value) { \ - if (Value) PORT_B_DAT |= Mask; \ - else PORT_B_DAT &= ~(Mask); \ - } -#define WRITE_PORT(Value) WRITE_PORT_B(PB_EEPROM,Value) - -#define READ_PORT (PORT_B_DAT&PB_EEPROM) - -/* 64 bytes chip */ -#define EE_CHIP_SIZE 64 - -/* We use this resistor for measuring the current drain on 3.3V */ -#define CURRENT_RESISTOR 0.022 - -/* microsecs - Pull line down at least this long for reset pulse */ -#define RESET_LOW_TIME 490 - -/* Read presence pulse after we release reset pulse */ -#define PRESENCE_TIMEOUT 100 -#define PRESENCE_LOW_TIME 200 - -#define WRITE_0_LOW 80 -#define WRITE_1_LOW 2 -#define TOTAL_WRITE_LOW 80 - -#define READ_LOW 2 -#define READ_TIMEOUT 10 -#define TOTAL_READ_LOW 80 - -/*** Rom function commands ***/ -#define READ_ROM 0x33 -#define MATCH_ROM 0x55 -#define SKIP_ROM 0xCC -#define SEARCH_ROM 0xF0 - - -/*** Memory_command_function ***/ -#define WRITE_SCRATCHPAD 0x4E -#define READ_SCRATCHPAD 0xBE -#define COPY_SCRATCHPAD 0x48 -#define RECALL_MEMORY 0xB8 -#define CONVERT_TEMP 0x44 -#define CONVERT_VOLTAGE 0xB4 - -/* Chip is divided in 8 pages, 8 bytes each */ - -#define EE_PAGE_SIZE 8 - -/* All chip data we want are in page 0 */ - -/* Bytes in page 0 */ -#define EE_P0_STATUS 0 -#define EE_P0_TEMP_LSB 1 -#define EE_P0_TEMP_MSB 2 -#define EE_P0_VOLT_LSB 3 -#define EE_P0_VOLT_MSB 4 -#define EE_P0_CURRENT_LSB 5 -#define EE_P0_CURRENT_MSB 6 - - -/* 40 byte user data is located at page 3-7 */ -#define EE_USER_PAGE_0 3 -#define USER_PAGES 5 - -#endif /* INCeedevh */ diff --git a/board/gth/flash.c b/board/gth/flash.c deleted file mode 100644 index 169270be1a..0000000000 --- a/board/gth/flash.c +++ /dev/null @@ -1,649 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - * Protection Flags: - */ -#define FLAG_PROTECT_SET 0x01 -#define FLAG_PROTECT_CLEAR 0x02 - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /*printf("faking");*/ - - return(0x1fffff); - - /* Init: no FLASHes known */ - for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) - { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - -#if 0 - if (FLASH_BASE1_PRELIM != 0x0) { - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20,size_b0, size_b0<<20); - - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - } else { -#endif - size_b1 = 0; - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; - memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - if (size_b1) - { - /* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */ - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - } - else - { -/* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - FIXME memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */ - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0 + size_b1); -} - - -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start adress table */ - if (info->flash_id & FLASH_BTYPE) - { - /* set sector offsets for bottom boot block type */ - for (i = 0; i < info->sector_count; i++) - { - info->start[i] = base + (i * 0x00040000); - } - } - else - { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - for (; i >= 0; i--) - { - info->start[i] = base + i * 0x00040000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - -#if 0 - case FLASH_AM040B: - printf ("AM29F040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM040T: - printf ("AM29F040T (4 Mbit, top boot sect)\n"); - break; -#endif - case FLASH_AM400B: - printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) - { - if ((i % 5) == 0) - { - printf ("\n "); - } - - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; -#if 0 - ulong base = (ulong)addr; -#endif - ulong value; - - /* Write auto select command: read Manufacturer ID */ -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0x90909090; -#endif - - value = addr[0]; - - switch (value) - { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - value = addr[1]; /* device ID */ - - switch (value) - { -#if 0 - case AMD_ID_F040B: - info->flash_id += FLASH_AM040B; - info->sector_count = 8; - info->size = 0x00200000; - break; /* => 2 MB */ -#endif - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - -#if 0 - /* set up sector start adress table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -#else - flash_get_offsets ((ulong)addr, &flash_info[0]); -#endif - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) - { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) - { - addr = (volatile unsigned long *)info->start[0]; -#if 0 - *addr = 0x00F000F0; /* reset bank */ -#else - *addr = 0xF0F0F0F0; /* reset bank */ -#endif - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0x80808080; - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; -#endif - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); -#if 0 - addr[0] = 0x00300030; -#else - addr[0] = 0x30303030; -#endif - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); -#if 0 - while ((addr[0] & 0x00800080) != 0x00800080) -#else - while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF) -#endif - { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; -#if 0 - addr[0] = 0x00F000F0; /* reset bank */ -#else - addr[0] = 0xF0F0F0F0; /* reset bank */ -#endif - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - -#if 0 - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; -#else - addr[0x0555] = 0xAAAAAAAA; - addr[0x02AA] = 0x55555555; - addr[0x0555] = 0xA0A0A0A0; -#endif - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); -#if 0 - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) -#else - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) -#endif - { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/gth/gth.c b/board/gth/gth.c deleted file mode 100644 index 4399db2d56..0000000000 --- a/board/gth/gth.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Adapted from FADS and other board config files to GTH by thomas@corelatus.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <watchdog.h> -#include <mpc8xx.h> -#include "ee_access.h" -#include "ee_dev.h" - -#ifdef CONFIG_BDM -#undef printf -#define printf(a,...) /* nothing */ -#endif - - -int checkboard (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - int Id = 0; - int Rev = 0; - u32 Pbdat; - - puts ("Board: "); - - /* Turn on leds and setup for reading rev and id */ - -#define PB_OUTS (PB_BLUE_LED|PB_ID_GND) -#define PB_INS (PB_ID_0|PB_ID_1|PB_ID_2|PB_ID_3|PB_REV_1|PB_REV_0) - - immap->im_cpm.cp_pbpar &= ~(PB_OUTS | PB_INS); - - immap->im_cpm.cp_pbdir &= ~PB_INS; - - immap->im_cpm.cp_pbdir |= PB_OUTS; - immap->im_cpm.cp_pbodr |= PB_OUTS; - immap->im_cpm.cp_pbdat &= ~PB_OUTS; - - /* Hold 100 Mbit in reset until fpga is loaded */ - immap->im_ioport.iop_pcpar &= ~PC_ENET100_RESET; - immap->im_ioport.iop_pcdir |= PC_ENET100_RESET; - immap->im_ioport.iop_pcso &= ~PC_ENET100_RESET; - immap->im_ioport.iop_pcdat &= ~PC_ENET100_RESET; - - /* Turn on front led to show that we are alive */ - immap->im_ioport.iop_papar &= ~PA_FRONT_LED; - immap->im_ioport.iop_padir |= PA_FRONT_LED; - immap->im_ioport.iop_paodr |= PA_FRONT_LED; - immap->im_ioport.iop_padat &= ~PA_FRONT_LED; - - Pbdat = immap->im_cpm.cp_pbdat; - - if (!(Pbdat & PB_ID_0)) - Id += 1; - if (!(Pbdat & PB_ID_1)) - Id += 2; - if (!(Pbdat & PB_ID_2)) - Id += 4; - if (!(Pbdat & PB_ID_3)) - Id += 8; - - if (Pbdat & PB_REV_0) - Rev += 1; - if (Pbdat & PB_REV_1) - Rev += 2; - - /* Turn ID off since we dont need it anymore */ - immap->im_cpm.cp_pbdat |= PB_ID_GND; - - printf ("GTH board, rev %d, id=0x%01x\n", Rev, Id); - return 0; -} - -#define _NOT_USED_ 0xffffffff -const uint sdram_table[] = { - /* Single read, offset 0 */ - 0x0f3dfc04, 0x0eefbc04, 0x01bf7c04, 0x0feafc00, - 0x1fb5fc45, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Burst read, Offset 0x8, 4 reads */ - 0x0f3dfc04, 0x0eefbc04, 0x00bf7c04, 0x00ffec00, - 0x00fffc00, 0x01eafc00, 0x1fb5fc00, 0xfffffc45, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Not used part of burst read is used for MRS, Offset 0x14 */ - 0xefeabc34, 0x1fb57c34, 0xfffffc05, _NOT_USED_, - /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */ - - /* Single write, Offset 0x18 */ - 0x0f3dfc04, 0x0eebbc00, 0x01a27c04, 0x1fb5fc45, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Burst write, Offset 0x20. 4 writes */ - 0x0f3dfc04, 0x0eebbc00, 0x00b77c00, 0x00fffc00, - 0x00fffc00, 0x01eafc04, 0x1fb5fc45, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Not used part of burst write is used for precharge, Offset 0x2C */ - 0x0ff5fc04, 0xfffffc05, _NOT_USED_, _NOT_USED_, - /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */ - - /* Period timer service. Offset 0x30. Refresh. Wait at least 70 ns after refresh command */ - 0x1ffd7c04, 0xfffffc04, 0xfffffc04, 0xfffffc05, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Exception, Offset 0x3C */ - 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_ -}; - -const uint fpga_table[] = { - /* Single read, offset 0 */ - 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04, - 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05, - - /* Burst read, Offset 0x8 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Single write, Offset 0x18 */ - 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04, - 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05, - - /* Burst write, Offset 0x20. */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Period timer service. Offset 0x30. */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* Exception, Offset 0x3C */ - 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_ -}; - -int _initsdram (uint base, uint * noMbytes) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *mc = &immap->im_memctl; - volatile u32 *memptr; - - mc->memc_mptpr = MPTPR_PTP_DIV16; /* (16-17) */ - - /* SDRAM in UPMA - - GPL_0 is connected instead of A19 to SDRAM. - According to table 16-17, AMx should be 001, i.e. type 1 - and GPL_0 should hold address A10 when multiplexing */ - - mc->memc_mamr = (0x2E << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_AMA_TYPE_1 | MAMR_G0CLA_A10 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X; /* (16-13) */ - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Perform init of sdram ( Datasheet Page 9 ) - Precharge */ - mc->memc_mcr = 0x8000212C; /* run upm a at 0x2C (16-15) */ - - /* Run 2 refresh cycles */ - mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */ - mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */ - - /* Set Mode register */ - mc->memc_mar = 0x00000088; /* set mode register (address) to 0x022 (16-17) */ - /* Lower 2 bits are not connected to chip */ - mc->memc_mcr = 0x80002114; /* run upm a at 0x14 (16-15) */ - - /* CS1, base 0x0000000 - 64 Mbyte, use UPM A */ - mc->memc_or1 = 0xfc000000 | OR_CSNT_SAM; - mc->memc_br1 = BR_MS_UPMA | BR_V; /* SDRAM base always 0 */ - - /* Test if we really have 64 MB SDRAM */ - memptr = (u32 *) 0; - *memptr = 0; - - memptr = (u32 *) 0x2000000; /* First u32 in upper 32 MB */ - *memptr = 0x12345678; - - memptr = (u32 *) 0; - if (*memptr == 0x12345678) { - /* Wrapped, only have 32 MB */ - mc->memc_or1 = 0xfe000000 | OR_CSNT_SAM; - *noMbytes = 32; - } else { - /* 64 MB */ - *noMbytes = 64; - } - - /* Setup FPGA in UPMB */ - upmconfig (UPMB, (uint *) fpga_table, - sizeof (fpga_table) / sizeof (uint)); - - /* Enable UPWAITB */ - mc->memc_mbmr = MBMR_GPL_B4DIS; /* (16-13) */ - - /* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */ - mc->memc_or2 = 0xffc00000 | OR_BI; - mc->memc_br2 = FPGA_2_BASE | BR_MS_UPMB | BR_V; - - /* CS3, base FPGA_3_BASE - 4 MByte, use UPM B 16 bit */ - mc->memc_or3 = 0xffc00000 | OR_BI; - mc->memc_br3 = FPGA_3_BASE | BR_MS_UPMB | BR_V | BR_PS_16; - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -void _sdramdisable (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_br1 = 0x00000000; - - /* maybe we should turn off upmb here or something */ -} - -/* ------------------------------------------------------------------------- */ - -int initsdram (uint base, uint * noMbytes) -{ - *noMbytes = 32; - -#ifdef CONFIG_START_IN_RAM - /* SDRAM is already setup. Dont touch it */ - return 0; -#else - - if (!_initsdram (base, noMbytes)) { - - return 0; - } else { - _sdramdisable (); - - return -1; - } -#endif -} - -phys_size_t initdram (int board_type) -{ - u32 *i; - u32 j; - u32 k; - - /* GTH only have SDRAM */ - uint sdramsz; - - if (!initsdram (0x00000000, &sdramsz)) { - printf ("(%u MB SDRAM) ", sdramsz); - } else { - /******************************** - *SDRAM ERROR, HALT PROCESSOR - *********************************/ - printf ("SDRAM ERROR\n"); - while (1); - } - -#ifndef CONFIG_START_IN_RAM - -#define U32_S ((sdramsz<<18)-1) - -#if 1 - /* Do a simple memory test */ - for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) { - *i = j + (j << 17); - *(i + 1) = ~(j + (j << 18)); - } - - WATCHDOG_RESET (); - - printf ("."); - - for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) { - k = *i; - if (k != (j + (j << 17))) { - printf ("Mem test error, i=0x%x, 0x%x\n, 0x%x", (u32) i, j, k); - while (1); - } - k = *(i + 1); - if (k != ~(j + (j << 18))) { - printf ("Mem test error(+1), i=0x%x, 0x%x\n, 0x%x", - (u32) i + 1, j, k); - while (1); - } - } -#endif - - WATCHDOG_RESET (); - - /* Clear memory */ - for (i = (u32 *) 0; (u32) i < U32_S; i++) { - *i = 0; - } -#endif /* !start in ram */ - - WATCHDOG_RESET (); - - return (sdramsz << 20); -} - -#define POWER_OFFSET 0xF0000 -#define SW_WATCHDOG_REASON 13 - -#define BOOTDATA_OFFSET 0xF8000 -#define MAX_ATTEMPTS 5 - -#define FAILSAFE_BOOT 1 -#define SYSTEM_BOOT 2 - -#define WRITE_FLASH16(a, d) \ -do \ -{ \ - *((volatile u16 *) (a)) = (d);\ - } while(0) - -static void write_bootdata (volatile u16 * addr, u8 System, u8 Count) -{ - u16 data; - volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE); - - if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) { - printf ("Invalid system data %u, setting failsafe\n", System); - System = FAILSAFE_BOOT; - } - - if ((Count < 1) | (Count > MAX_ATTEMPTS)) { - printf ("Invalid boot count %u, setting 1\n", Count); - Count = 1; - } - - if (System == FAILSAFE_BOOT) { - printf ("Setting failsafe boot in flash\n"); - } else { - printf ("Setting system boot in flash\n"); - } - printf ("Boot attempt %d\n", Count); - - data = (System << 8) | Count; - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr, data); -} - -static void maybe_update_restart_reason (volatile u32 * addr32) -{ - /* Update addr if sw wd restart */ - volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE); - volatile u16 *addr_16 = (u16 *) addr32; - u32 rsr; - - /* Dont reset register now */ - rsr = ((volatile immap_t *) CONFIG_SYS_IMMR)->im_clkrst.car_rsr; - - rsr >>= 24; - - if (rsr & 0x10) { - /* Was really a sw wd restart, update reason */ - - printf ("Last restart by software watchdog\n"); - - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr_16, 0); - - udelay (1000); - - WATCHDOG_RESET (); - - /* AMD 16 bit */ - WRITE_FLASH16 (&flash[0x555], 0xAAAA); - WRITE_FLASH16 (&flash[0x2AA], 0x5555); - WRITE_FLASH16 (&flash[0x555], 0xA0A0); - - WRITE_FLASH16 (addr_16 + 1, SW_WATCHDOG_REASON); - - } -} - -static void check_restart_reason (void) -{ - /* Update restart reason if sw watchdog was - triggered */ - - int i; - volatile u32 *raddr; - - raddr = (u32 *) (CONFIG_SYS_FLASH_BASE + POWER_OFFSET); - - if (*raddr == 0xFFFFFFFF) { - /* Nothing written */ - maybe_update_restart_reason (raddr); - } else { - /* Search for latest written reason */ - i = 0; - while ((*(raddr + 2) != 0xFFFFFFFF) & (i < 2000)) { - raddr += 2; - i++; - } - if (i >= 2000) { - /* Whoa, dont write any more */ - printf ("*** No free restart reason found ***\n"); - } else { - /* Check if written */ - if (*raddr == 0) { - /* Erased by kernel, no new reason written */ - maybe_update_restart_reason (raddr + 2); - } - } - } -} - -static void check_boot_tries (void) -{ - /* Count the number of boot attemps - switch system if too many */ - - int i; - volatile u16 *addr; - volatile u16 data; - int failsafe = 1; - u8 system; - u8 count; - - addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET); - - if (*addr == 0xFFFF) { - printf ("*** No bootdata exists. ***\n"); - write_bootdata (addr, FAILSAFE_BOOT, 1); - } else { - /* Search for latest written bootdata */ - i = 0; - while ((*(addr + 1) != 0xFFFF) & (i < 8000)) { - addr++; - i++; - } - if (i >= 8000) { - /* Whoa, dont write any more */ - printf ("*** No bootdata found. Not updating flash***\n"); - } else { - /* See how many times we have tried to boot real system */ - data = *addr; - system = data >> 8; - count = data & 0xFF; - if ((system != SYSTEM_BOOT) & (system != FAILSAFE_BOOT)) { - printf ("*** Wrong system %d\n", system); - system = FAILSAFE_BOOT; - count = 1; - } else { - switch (count) { - case 0: - case 1: - case 2: - case 3: - case 4: - /* Try same system again if needed */ - count++; - break; - - case 5: - /* Switch system and reset tries */ - count = 1; - system = 3 - system; - printf ("***Too many boot attempts, switching system***\n"); - break; - default: - /* Switch system, start over and hope it works */ - printf ("***Unexpected data on addr 0x%x, %u***\n", - (u32) addr, data); - count = 1; - system = 3 - system; - } - } - write_bootdata (addr + 1, system, count); - if (system == SYSTEM_BOOT) { - failsafe = 0; - } - } - } - if (failsafe) { - printf ("Booting failsafe system\n"); - setenv ("bootargs", "panic=1 root=/dev/hda7"); - setenv ("bootcmd", "disk 100000 0:5;bootm 100000"); - } else { - printf ("Using normal system\n"); - setenv ("bootargs", "panic=1 root=/dev/hda4"); - setenv ("bootcmd", "disk 100000 0:2;bootm 100000"); - } -} - -int misc_init_r (void) -{ - u8 Rx[80]; - u8 Tx[5]; - int page; - int read = 0; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - /* Kill fpga */ - immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE); - immap->im_ioport.iop_padir |= (PA_FL_CONFIG | PA_FL_CE); - immap->im_ioport.iop_paodr &= ~(PA_FL_CONFIG | PA_FL_CE); - - /* Enable fpga, active low */ - immap->im_ioport.iop_padat &= ~PA_FL_CE; - - /* Start configuration */ - immap->im_ioport.iop_padat &= ~PA_FL_CONFIG; - udelay (2); - - immap->im_ioport.iop_padat |= (PA_FL_CONFIG | PA_FL_CE); - - /* Check if we need to boot failsafe system */ - check_boot_tries (); - - /* Check if we need to update restart reason */ - check_restart_reason (); - - if (ee_init_data ()) { - printf ("EEPROM init failed\n"); - return (0); - } - - /* Read the pages where ethernet address is stored */ - - for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) { - /* Copy from nvram to scratchpad */ - Tx[0] = RECALL_MEMORY; - Tx[1] = page; - if (ee_do_command (Tx, 2, NULL, 0, TRUE)) { - printf ("EE user page %d recall failed\n", page); - return (0); - } - - Tx[0] = READ_SCRATCHPAD; - if (ee_do_command (Tx, 2, Rx + read, 9, TRUE)) { - printf ("EE user page %d read failed\n", page); - return (0); - } - /* Crc in 9:th byte */ - if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) { - printf ("EE read failed, page %d. CRC error\n", page); - return (0); - } - read += 8; - } - - /* Add eos after eth addr */ - Rx[17] = 0; - - printf ("Ethernet addr read from eeprom: %s\n\n", Rx); - - if ((Rx[2] != ':') | - (Rx[5] != ':') | - (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) { - printf ("*** ethernet addr invalid, using default ***\n"); - } else { - setenv ("ethaddr", (char *)Rx); - } - return (0); -} diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c deleted file mode 100644 index a4db16d0ce..0000000000 --- a/board/gth/pcmcia.c +++ /dev/null @@ -1,93 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <pcmcia.h> - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH" - -int pcmcia_voltage_set (int slot, int vcc, int vpp) -{ /* Do nothing */ - return 0; -} - -int pcmcia_hardware_enable (int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - volatile sysconf8xx_t *sysp; - uint reg, mask; - - debug ("hardware_enable: GTH Slot %c\n", 'A' + slot); - - immap = (immap_t *) CONFIG_SYS_IMMR; - sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia)); - cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm)); - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK (_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX (_slot_) = reg; - udelay (500); - - /* - * Make sure there is a card in the slot, - * then configure the interface. - */ - udelay (10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__, __FUNCTION__, - &(pcmp->pcmc_pipr), pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & 0x98000000) { - printf (" No Card found\n"); - return (1); - } - - mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot); - reg = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - reg, - (reg & PCMCIA_VS1 (slot)) ? "n" : "ff", - (reg & PCMCIA_VS2 (slot)) ? "n" : "ff"); - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX (_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX (_slot_) = reg; - - udelay (250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return 0; -} -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - return 0; /* No hardware to disable */ -} -#endif - -#endif /* CONFIG_PCMCIA */ diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds deleted file mode 100644 index 4145a91c74..0000000000 --- a/board/gth/u-boot.lds +++ /dev/null @@ -1,127 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc8xx/start.o(.text) - *(.text) - common/env_embedded.o(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 5dd0311d41..9a929413bd 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -272,8 +272,7 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( fpga, 6, 1, do_fpga, @@ -324,8 +323,7 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* fall through ... */ default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } memset (data, 0, HYMOD_EEPROM_SIZE); diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 637bb5a7b3..cf82f61ef7 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -168,8 +168,7 @@ static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc, printf("exit code: 0x%X\n", val); return 0; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } return -1; @@ -244,10 +243,8 @@ static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, int combrd, baudrate, i, j, len; int address; - if (argc < 5) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 5) + return cmd_usage(cmdtp); argc--; argv++; @@ -394,10 +391,8 @@ static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc, unsigned int period, freq; int prev, i; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); argc--; argv++; @@ -474,8 +469,7 @@ static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc, return c->cmd(c, flag, argc, argv); } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 3a33b5a511..d7cbd7a2a9 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -186,10 +186,8 @@ int board_init(void) int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 tmp; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((strcmp(argv[1], "off") == 0)) { printf("SPI FLASH disabled, NAND enabled\n"); @@ -214,8 +212,7 @@ int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) tmp = readl(KW_GPIO0_BASE); writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 61a1e1417f..9d6c21f73a 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -845,8 +845,7 @@ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( pic, 4, 1, do_pic, @@ -975,8 +974,7 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 3948c13b64..ec113e7f56 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -306,20 +306,15 @@ void hw_watchdog_reset(void) int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - if ((strcmp(argv[1], "on") == 0)) { + if ((strcmp(argv[1], "on") == 0)) gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1); - } else if ((strcmp(argv[1], "off") == 0)) { + else if ((strcmp(argv[1], "off") == 0)) gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0); - } else { - cmd_usage(cmdtp); - return 1; - } - + else + return cmd_usage(cmdtp); return 0; } diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index a3722b2024..b4343d81de 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -528,8 +528,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } #endif - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 199def4678..4a91458e8e 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -232,8 +232,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index d7adff2f8e..a61e9451aa 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -616,9 +616,8 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int rcode = -1; if (argc < 2) { - usage: - cmd_usage(cmdtp); - return 1; +usage: + return cmd_usage(cmdtp); } if (argc >= 3) { diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index 29a095d738..e3abeb8ef1 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -635,10 +635,8 @@ static int set_lcd_brightness(char *brightness) static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); return set_lcd_brightness(argv[1]); } diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index 73294351ba..692160cea8 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -36,20 +36,20 @@ extern int do_bootm (cmd_tbl_t *, int, int, char *[]); /* * Command led: controls the various LEDs 0..11 on the PN62 card. */ -int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_led(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[]) { - unsigned int number, function; + unsigned int number, function; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } - number = simple_strtoul(argv[1], NULL, 10); - if (number > PN62_LED_MAX) - return 1; - function = simple_strtoul(argv[2], NULL, 16); - set_led (number, function); - return 0; + if (argc != 3) + return cmd_usage(cmdtp); + + number = simple_strtoul(argv[1], NULL, 10); + if (number > PN62_LED_MAX) + return 1; + + function = simple_strtoul(argv[2], NULL, 16); + set_led(number, function); + return 0; } U_BOOT_CMD( led , 3, 1, do_led, @@ -83,8 +83,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr = simple_strtoul(argv[1], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf ("## Ready for image download ...\n"); diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 3f2deed1e2..83b79148cb 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -214,10 +214,8 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index dae01ec773..e15013f2fc 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -304,10 +304,8 @@ int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned char mac[6]; char *s, *e; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); s = argv[1]; @@ -330,10 +328,8 @@ U_BOOT_CMD( int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc != 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 1) + return cmd_usage(cmdtp); mac_read(); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 44247c850f..6d92c8362e 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -112,10 +112,8 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *cmd; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); cmd = argv[1]; switch (cmd[0]) { @@ -150,8 +148,7 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) test_net(); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index d62cfd1bef..733979c619 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -398,11 +398,9 @@ int last_stage_init(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); + +#ifdef CONFIG_FSL_PCI_INIT + FT_FSL_PCI_SETUP; #endif } #endif diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c index d20fa51c3d..705e1c2964 100644 --- a/board/sbc8641d/law.c +++ b/board/sbc8641d/law.c @@ -32,11 +32,11 @@ * * 0x0000_0000 DDR 256M * 0x1000_0000 DDR2 256M - * 0x8000_0000 PCI1 MEM 512M - * 0xa000_0000 PCI2 MEM 512M + * 0x8000_0000 PCIE1 MEM 512M + * 0xa000_0000 PCIE2 MEM 512M * 0xc000_0000 RapidIO 512M - * 0xe200_0000 PCI1 IO 16M - * 0xe300_0000 PCI2 IO 16M + * 0xe200_0000 PCIE1 IO 16M + * 0xe300_0000 PCIE2 IO 16M * 0xf800_0000 CCSRBAR 2M * 0xfe00_0000 FLASH (boot bank) 32M * @@ -49,11 +49,11 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), #endif - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO) }; diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index c4e9875324..54b2d0b166 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -191,16 +191,16 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = { }; #endif -static struct pci_controller pci1_hose = { +static struct pci_controller pcie1_hose = { #ifndef CONFIG_PCI_PNP config_table:pci_mpc86xxcts_config_table #endif }; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif /* CONFIG_PCIE2 */ int first_free_busno = 0; @@ -212,10 +212,10 @@ void pci_init_board(void) uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) >> MPC8641_PORDEVSR_IO_SEL_SHIFT; -#ifdef CONFIG_PCI1 +#ifdef CONFIG_PCIE1 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; + struct pci_controller *hose = &pcie1_hose; struct pci_region *r = hose->regions; #ifdef DEBUG uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) @@ -236,16 +236,16 @@ void pci_init_board(void) /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BUS, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, + CONFIG_SYS_PCIE1_MEM_BUS, + CONFIG_SYS_PCIE1_MEM_PHYS, + CONFIG_SYS_PCIE1_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BUS, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, + CONFIG_SYS_PCIE1_IO_BUS, + CONFIG_SYS_PCIE1_IO_PHYS, + CONFIG_SYS_PCIE1_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -264,26 +264,26 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS1: Disabled\n"); -#endif /* CONFIG_PCI1 */ +#endif /* CONFIG_PCIE1 */ -#ifdef CONFIG_PCI2 +#ifdef CONFIG_PCIE2 { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR; - struct pci_controller *hose = &pci2_hose; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; + struct pci_controller *hose = &pcie2_hose; struct pci_region *r = hose->regions; /* outbound memory */ pci_set_region(r++, - CONFIG_SYS_PCI2_MEM_BUS, - CONFIG_SYS_PCI2_MEM_PHYS, - CONFIG_SYS_PCI2_MEM_SIZE, + CONFIG_SYS_PCIE2_MEM_BUS, + CONFIG_SYS_PCIE2_MEM_PHYS, + CONFIG_SYS_PCIE2_MEM_SIZE, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, - CONFIG_SYS_PCI2_IO_BUS, - CONFIG_SYS_PCI2_IO_PHYS, - CONFIG_SYS_PCI2_IO_SIZE, + CONFIG_SYS_PCIE2_IO_BUS, + CONFIG_SYS_PCIE2_IO_PHYS, + CONFIG_SYS_PCIE2_IO_SIZE, PCI_REGION_IO); hose->region_count = r - hose->regions; @@ -298,7 +298,7 @@ void pci_init_board(void) } #else puts("PCI-EXPRESS 2: Disabled\n"); -#endif /* CONFIG_PCI2 */ +#endif /* CONFIG_PCIE2 */ } @@ -308,12 +308,7 @@ void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCI2 - ft_fsl_pci_setup(blob, "pci1", &pci2_hose); -#endif + FT_FSL_PCI_SETUP; } #endif diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index 5660c09148..ef8bfde7f1 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -286,8 +286,7 @@ int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; failure: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 14d75ea429..97952844f9 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -399,8 +399,7 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) default: break; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD (puma, 4, 1, do_puma, diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c index d99036bef3..0562222ac8 100644 --- a/board/spear/common/spr_misc.c +++ b/board/spear/common/spr_misc.c @@ -215,10 +215,8 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *s, *e; char i2c_mac[20]; - if ((argc > 3) || (argc < 2)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc > 3) || (argc < 2)) + return cmd_usage(cmdtp); if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) { @@ -286,8 +284,7 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(chip_config, 3, 1, do_chip_config, diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c index c00bf16bd9..98ab49f49f 100644 --- a/board/t3corp/chip_config.c +++ b/board/t3corp/chip_config.c @@ -27,13 +27,27 @@ struct ppc4xx_config ppc4xx_config_val[] = { { - "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", + "600-67", "CPU: 600 PLB: 200 OPB: 67 EBC: 67", + { + 0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 } }, { + "667", "CPU: 667 PLB: 166 OPB: 83 EBC: 83", + { + 0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0, + 0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { "800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100", { 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, diff --git a/board/t3corp/init.S b/board/t3corp/init.S index 4a4217fc8e..ecd35ff7b6 100644 --- a/board/t3corp/init.S +++ b/board/t3corp/init.S @@ -81,11 +81,13 @@ tlbtab: tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG) /* TLB-entry for FPGA(s) */ - tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4, + tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M, + CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4, + tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4, AC_RW | SA_IG) /* TLB-entry for OCM */ diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c index 8ffa321690..ddf58970a3 100644 --- a/board/t3corp/t3corp.c +++ b/board/t3corp/t3corp.c @@ -45,7 +45,7 @@ int board_early_init_f(void) mtdcr(UIC1SR, 0xffffffff); /* clear all */ mtdcr(UIC1ER, 0x00000000); /* disable all */ mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1PR, 0x7fffffff); /* per ref-board manual */ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(UIC1SR, 0xffffffff); /* clear all */ diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 0db705049f..0789c5848e 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -327,8 +327,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"saw",3) == 0) { printf ("Play sawtooth\n"); @@ -342,8 +341,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -358,8 +356,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) LEFT_RIGHT); return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 4: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -382,8 +379,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) pcm1772_write_reg((uchar)reg, (uchar)val); return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 5: if (strncmp(argv[1],"saw",3) == 0) { duration = simple_strtoul(argv[2], NULL, 10); @@ -412,8 +408,7 @@ static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) channel); return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf ("Usage:\nsound cmd [arg1] [arg2] ...\n"); return 1; @@ -513,8 +508,7 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) channel = LEFT_RIGHT; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if ((tmp = getenv ("volume")) != NULL) { diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index fc2a6cbdb5..dda2cb6ed1 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -687,12 +687,7 @@ void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); -#endif + FT_FSL_PCI_SETUP; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 6d23470f84..ca4415c0b9 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -167,10 +167,8 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; int cycle_status; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); led_init (); global_vars_init (); @@ -270,14 +268,11 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i, dip; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); - if ((dip = read_dip ()) == -1) { + if ((dip = read_dip ()) == -1) return 1; - } for (i = 0; i < 4; i++) { if ((dip & (1 << i)) == 0) @@ -303,14 +298,11 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int vcc5v; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); - if ((vcc5v = read_vcc5v ()) == -1) { + if ((vcc5v = read_vcc5v ()) == -1) return (1); - } printf ("%d", (vcc5v / 1000)); printf (".%d", (vcc5v % 1000) / 100); @@ -331,10 +323,8 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int contact_temp; - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); tsc2000_spi_init (); @@ -354,36 +344,32 @@ U_BOOT_CMD( int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc > 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 1) + return cmd_usage(cmdtp); if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_STATUS, 1, - (unsigned char*) &status, 1)) { + (unsigned char*) &status, 1)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_PASS_CYCLES, 1, - (unsigned char*) &pass_cycles, 2)) { + (unsigned char*) &pass_cycles, 2)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_CYCLE, - 1, (unsigned char*) &first_error_cycle, 2)) { + 1, (unsigned char*) &first_error_cycle, 2)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NUM, - 1, (unsigned char*) &first_error_num, 1)) { + 1, (unsigned char*) &first_error_num, 1)) return (1); - } + if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME, 1, (unsigned char*)first_error_name, - sizeof (first_error_name))) { + sizeof (first_error_name))) return (1); - } - if (read_max_cycles () != 0) { + if (read_max_cycles () != 0) return (1); - } printf ("max_cycles = %d\n", max_cycles); printf ("status = %d\n", status); @@ -850,14 +836,11 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) struct rtc_time tm; #endif - if (argc > 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 2) + return cmd_usage(cmdtp); - if (argc > 1) { + if (argc > 1) delay = simple_strtoul(argv[1], NULL, 10); - } tsc2000_spi_init (); while (1) { diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index fede2e0774..fd623df25f 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -42,36 +42,29 @@ static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int offset,value; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); offset=simple_strtoul(argv[2],NULL,16); value=simple_strtoul(argv[3],NULL,16); if (offset > 0x40) { printf("Wrong offset : 0x%x\n",offset); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } dm9000_write_srom_word(offset, value); return (0); } int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - if (strcmp (argv[1],"read") == 0) { + if (strcmp (argv[1],"read") == 0) return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); - } else if (strcmp (argv[1],"write") == 0) { + else if (strcmp (argv[1],"write") == 0) return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index 44d40eed28..cab9881ad8 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -38,10 +38,8 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uchar dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR; /* Validate usage */ - if (argc > 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc > 2) + return cmd_usage(cmdtp); /* Passed in EEPROM address */ if (argc == 2) diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index 3a8182715b..ece7882577 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -398,18 +398,6 @@ void pci_init_board(void) #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_pci_setup(void *blob, bd_t *bd) { - /* TODO - make node name (eg pci0) dynamic */ -#ifdef CONFIG_PCI1 - ft_fsl_pci_setup(blob, "pci0", &pci1_hose); -#endif -#ifdef CONFIG_PCIE1 - ft_fsl_pci_setup(blob, "pci2", &pcie1_hose); -#endif -#ifdef CONFIG_PCIE2 - ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); -#endif -#ifdef CONFIG_PCIE3 - ft_fsl_pci_setup(blob, "pci0", &pcie3_hose); -#endif + FT_FSL_PCI_SETUP; } #endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/boards.cfg b/boards.cfg index 8aab169aae..b82f530f46 100644 --- a/boards.cfg +++ b/boards.cfg @@ -143,7 +143,6 @@ EP88x powerpc mpc8xx ep88x ETX094 powerpc mpc8xx etx094 FLAGADM powerpc mpc8xx flagadm GENIETV powerpc mpc8xx genietv -GTH powerpc mpc8xx gth hermes powerpc mpc8xx IP860 powerpc mpc8xx ip860 LANTEC powerpc mpc8xx lantec diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index d01ee19ee5..2bd62e2438 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -84,10 +84,8 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) addr = dis_last_addr; len = dis_last_len; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* New command */ @@ -125,10 +123,8 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* -------------------------------------------------- */ int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); printf ("\nEnter '.' when done\n"); mem_addr = simple_strtoul (argv[1], NULL, 16); diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index 5ec798c549..d51cc554c1 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -102,8 +102,7 @@ static int do_bmp_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[ addr = simple_strtoul(argv[1], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return (bmp_info(addr)); @@ -127,8 +126,7 @@ static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar y = simple_strtoul(argv[3], NULL, 10); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return (bmp_display(addr, x, y)); @@ -159,12 +157,10 @@ static int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[0], &cmd_bmp_sub[0], ARRAY_SIZE(cmd_bmp_sub)); - if (c) { + if (c) return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 9ccc8c798d..72dacaaf7a 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -40,10 +40,8 @@ int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, rc; int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index bf77fb463d..adfa6cd18a 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -491,17 +491,14 @@ int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv argv++; return bootm_start(cmdtp, flag, argc, argv); } - } - /* Unrecognized command */ - else { - cmd_usage(cmdtp); - return 1; + } else { + /* Unrecognized command */ + return cmd_usage(cmdtp); } if (images.state >= state) { printf ("Trying to execute a command out of order\n"); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } images.state |= state; diff --git a/common/cmd_cache.c b/common/cmd_cache.c index be87b5c2d7..5cdd8341f2 100644 --- a/common/cmd_cache.c +++ b/common/cmd_cache.c @@ -34,10 +34,6 @@ int do_icache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 2: /* on / off */ switch (on_off(argv[1])) { -#if 0 /* prevented by varargs handling; FALLTROUGH is harmless, too */ - default: cmd_usage(cmdtp); - return; -#endif case 0: icache_disable(); break; case 1: icache_enable (); @@ -49,8 +45,7 @@ int do_icache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) icache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; } @@ -60,10 +55,6 @@ int do_dcache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 2: /* on / off */ switch (on_off(argv[1])) { -#if 0 /* prevented by varargs handling; FALLTROUGH is harmless, too */ - default: cmd_usage(cmdtp); - return; -#endif case 0: dcache_disable(); break; case 1: dcache_enable (); @@ -75,8 +66,7 @@ int do_dcache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) dcache_status() ? "ON" : "OFF"); return 0; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c index 45de8cd65a..45fe66a7ee 100644 --- a/common/cmd_dcr.c +++ b/common/cmd_dcr.c @@ -44,10 +44,8 @@ int do_getdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) unsigned long get_dcr (unsigned short); /* Validate arguments */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Get a DCR */ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16); @@ -73,10 +71,8 @@ int do_setdcr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) extern char console_buffer[]; /* Validate arguments */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Set a DCR */ dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16); @@ -120,10 +116,8 @@ int do_getidcr (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char buf[80]; /* Validate arguments */ - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* Find out whether ther is '.' (dot) symbol in the first parameter. */ strncpy (buf, argv[1], sizeof(buf)-1); @@ -176,10 +170,8 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) char buf[80]; /* Validate arguments */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* Find out whether ther is '.' (dot) symbol in the first parameter. */ strncpy (buf, argv[1], sizeof(buf)-1); diff --git a/common/cmd_df.c b/common/cmd_df.c index 6a086663bf..9a3c84c38c 100644 --- a/common/cmd_df.c +++ b/common/cmd_df.c @@ -27,8 +27,7 @@ static int do_df(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 129162c015..9f4b22c553 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -104,8 +104,7 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } #endif diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 49021cdb86..35fb36194c 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -65,10 +65,9 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; int part_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + dev = (int)simple_strtoul (argv[2], &ep, 16); dev_desc = get_dev(argv[1],dev); @@ -164,8 +163,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!filename) { diff --git a/common/cmd_fat.c b/common/cmd_fat.c index ede730804e..0220494343 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -45,39 +45,43 @@ int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *ep; if (argc < 5) { - printf ("usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]\n"); + printf( "usage: fatload <interface> <dev[:part]> " + "<addr> <filename> [bytes]\n"); return 1; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatload **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatload **\n", + argv[1], dev, part); return 1; } - offset = simple_strtoul (argv[3], NULL, 16); + offset = simple_strtoul(argv[3], NULL, 16); if (argc == 6) - count = simple_strtoul (argv[5], NULL, 16); + count = simple_strtoul(argv[5], NULL, 16); else count = 0; - size = file_fat_read (argv[4], (unsigned char *) offset, count); + size = file_fat_read(argv[4], (unsigned char *)offset, count); if(size==-1) { - printf("\n** Unable to read \"%s\" from %s %d:%d **\n",argv[4],argv[1],dev,part); + printf("\n** Unable to read \"%s\" from %s %d:%d **\n", + argv[4], argv[1], dev, part); return 1; } - printf ("\n%ld bytes read\n", size); + printf("\n%ld bytes read\n", size); sprintf(buf, "%lX", size); setenv("filesize", buf); @@ -104,34 +108,35 @@ int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; if (argc < 3) { - printf ("usage: fatls <interface> <dev[:part]> [directory]\n"); - return (0); + printf("usage: fatls <interface> <dev[:part]> [directory]\n"); + return 0; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatls **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatls **\n", + argv[1], dev, part); return 1; } if (argc == 4) - ret = file_fat_ls (argv[3]); + ret = file_fat_ls(argv[3]); else - ret = file_fat_ls (filename); + ret = file_fat_ls(filename); if(ret!=0) printf("No Fat FS detected\n"); - return (ret); + return ret; } U_BOOT_CMD( @@ -149,27 +154,28 @@ int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; if (argc < 2) { - printf ("usage: fatinfo <interface> <dev[:part]>\n"); - return (0); + printf("usage: fatinfo <interface> <dev[:part]>\n"); + return 0; } - dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); - if (dev_desc==NULL) { - puts ("\n** Invalid boot device **\n"); + dev = (int)simple_strtoul(argv[2], &ep, 16); + dev_desc = get_dev(argv[1],dev); + if (dev_desc == NULL) { + puts("\n** Invalid boot device **\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = (int)simple_strtoul(++ep, NULL, 16); } if (fat_register_device(dev_desc,part)!=0) { - printf ("\n** Unable to use %s %d:%d for fatinfo **\n",argv[1],dev,part); + printf("\n** Unable to use %s %d:%d for fatinfo **\n", + argv[1], dev, part); return 1; } - return (file_fat_detectfs ()); + return file_fat_detectfs(); } U_BOOT_CMD( @@ -178,143 +184,3 @@ U_BOOT_CMD( "<interface> <dev[:part]>\n" " - print information about filesystem from 'dev' on 'interface'" ); - -#ifdef NOT_IMPLEMENTED_YET -/* find first device whose first partition is a DOS filesystem */ -int find_fat_partition (void) -{ - int i, j; - block_dev_desc_t *dev_desc; - unsigned char *part_table; - unsigned char buffer[ATA_BLOCKSIZE]; - - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) { - dev_desc = ide_get_dev (i); - if (!dev_desc) { - debug ("couldn't get ide device!\n"); - return (-1); - } - if (dev_desc->part_type == PART_TYPE_DOS) { - if (dev_desc-> - block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - debug ("can't perform block_read!\n"); - return (-1); - } - part_table = &buffer[0x1be]; /* start with partition #4 */ - for (j = 0; j < 4; j++) { - if ((part_table[4] == 1 || /* 12-bit FAT */ - part_table[4] == 4 || /* 16-bit FAT */ - part_table[4] == 6) && /* > 32Meg part */ - part_table[0] == 0x80) { /* bootable? */ - curr_dev = i; - part_offset = part_table[11]; - part_offset <<= 8; - part_offset |= part_table[10]; - part_offset <<= 8; - part_offset |= part_table[9]; - part_offset <<= 8; - part_offset |= part_table[8]; - debug ("found partition start at %ld\n", part_offset); - return (0); - } - part_table += 16; - } - } - } - - debug ("no valid devices found!\n"); - return (-1); -} - -int -do_fat_dump (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[]) -{ - __u8 block[1024]; - int ret; - int bknum; - - ret = 0; - - if (argc != 2) { - printf ("needs an argument!\n"); - return (0); - } - - bknum = simple_strtoul (argv[1], NULL, 10); - - if (disk_read (0, bknum, block) != 0) { - printf ("Error: reading block\n"); - return -1; - } - printf ("FAT dump: %d\n", bknum); - hexdump (512, block); - - return (ret); -} - -int disk_read (__u32 startblock, __u32 getsize, __u8 *bufptr) -{ - ulong tot; - block_dev_desc_t *dev_desc; - - if (curr_dev < 0) { - if (find_fat_partition () != 0) - return (-1); - } - - dev_desc = ide_get_dev (curr_dev); - if (!dev_desc) { - debug ("couldn't get ide device\n"); - return (-1); - } - - tot = dev_desc->block_read (0, startblock + part_offset, - getsize, (ulong *) bufptr); - - /* should we do this here? - flush_cache ((ulong)buf, cnt*ide_dev_desc[device].blksz); - */ - - if (tot == getsize) - return (0); - - debug ("unable to read from device!\n"); - - return (-1); -} - - -static int isprint (unsigned char ch) -{ - if (ch >= 32 && ch < 127) - return (1); - - return (0); -} - - -void hexdump (int cnt, unsigned char *data) -{ - int i; - int run; - int offset; - - offset = 0; - while (cnt) { - printf ("%04X : ", offset); - if (cnt >= 16) - run = 16; - else - run = cnt; - cnt -= run; - for (i = 0; i < run; i++) - printf ("%02X ", (unsigned int) data[i]); - printf (": "); - for (i = 0; i < run; i++) - printf ("%c", isprint (data[i]) ? data[i] : '.'); - printf ("\n"); - data = &data[16]; - offset += run; - } -} -#endif /* NOT_IMPLEMENTED_YET */ diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index 486d5d4844..831a07f2c1 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -741,8 +741,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_drive=simple_strtoul(argv[2], NULL, 10); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* setup FDC and scan for drives */ if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) { diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index 00f7e88e12..a8822d91b0 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -73,8 +73,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) name = argv [2]; break; default: - cmd_usage(cmdtp); - break; + return cmd_usage(cmdtp); } /* Init physical layer */ diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index cd4c6de6da..3d0c2b772c 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -65,14 +65,12 @@ void set_working_fdt_addr(void *addr) */ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); - /******************************************************************** + /* * Set the address of the fdt - ********************************************************************/ + */ if (argv[1][0] == 'a') { unsigned long addr; /* @@ -116,18 +114,16 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - /******************************************************************** + /* * Move the working_fdt - ********************************************************************/ + */ } else if (strncmp(argv[1], "mo", 2) == 0) { struct fdt_header *newaddr; int len; int err; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* * Set the address and length of the fdt. @@ -166,9 +162,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } working_fdt = newaddr; - /******************************************************************** + /* * Make a new node - ********************************************************************/ + */ } else if (strncmp(argv[1], "mk", 2) == 0) { char *pathp; /* path */ char *nodep; /* new node to add */ @@ -178,10 +174,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* * Parameters: Node path, new node to be appended to the path. */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); pathp = argv[2]; nodep = argv[3]; @@ -202,9 +196,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - /******************************************************************** + /* * Set the value of a property in the working_fdt. - ********************************************************************/ + */ } else if (argv[1][0] == 's') { char *pathp; /* path */ char *prop; /* property */ @@ -216,10 +210,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* * Parameters: Node path, property, optional value. */ - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); pathp = argv[2]; prop = argv[3]; @@ -247,9 +239,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - /******************************************************************** + /* * Print (recursive) / List (single level) - ********************************************************************/ + */ } else if ((argv[1][0] == 'p') || (argv[1][0] == 'l')) { int depth = MAX_LEVEL; /* how deep to print */ char *pathp; /* path */ @@ -281,9 +273,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (ret != 0) return ret; - /******************************************************************** + /* * Remove a property/node - ********************************************************************/ + */ } else if (strncmp(argv[1], "rm", 2) == 0) { int nodeoffset; /* node offset from libfdt */ int err; @@ -321,9 +313,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } - /******************************************************************** + /* * Display header info - ********************************************************************/ + */ } else if (argv[1][0] == 'h') { u32 version = fdt_version(working_fdt); printf("magic:\t\t\t0x%x\n", fdt_magic(working_fdt)); @@ -351,16 +343,16 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) fdt_num_mem_rsv(working_fdt)); printf("\n"); - /******************************************************************** + /* * Set boot cpu id - ********************************************************************/ + */ } else if (strncmp(argv[1], "boo", 3) == 0) { unsigned long tmp = simple_strtoul(argv[2], NULL, 16); fdt_set_boot_cpuid_phys(working_fdt, tmp); - /******************************************************************** + /* * memory command - ********************************************************************/ + */ } else if (strncmp(argv[1], "me", 2) == 0) { uint64_t addr, size; int err; @@ -370,9 +362,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) if (err < 0) return err; - /******************************************************************** + /* * mem reserve commands - ********************************************************************/ + */ } else if (strncmp(argv[1], "rs", 2) == 0) { if (argv[2][0] == 'p') { uint64_t addr, size; @@ -417,8 +409,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } #ifdef CONFIG_OF_BOARD_SETUP @@ -430,10 +421,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) else if (argv[1][0] == 'c') { unsigned long initrd_start = 0, initrd_end = 0; - if ((argc != 2) && (argc != 4)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc != 2) && (argc != 4)) + return cmd_usage(cmdtp); if (argc == 4) { initrd_start = simple_strtoul(argv[2], NULL, 16); @@ -449,8 +438,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } else { /* Unrecognized command */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 5d8fb7a836..ff43965e9c 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -332,10 +332,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -383,10 +381,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "bank") == 0) { bank = simple_strtoul(argv[2], NULL, 16); @@ -406,10 +402,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); rcode = flash_sect_erase(addr_first, addr_last); return rcode; @@ -482,19 +476,15 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int p; int rcode = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); - if (strcmp(argv[1], "off") == 0) { + if (strcmp(argv[1], "off") == 0) p = 0; - } else if (strcmp(argv[1], "on") == 0) { + else if (strcmp(argv[1], "on") == 0) p = 1; - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); #ifdef CONFIG_HAS_DATAFLASH if ((strcmp(argv[2], "all") != 0) && (strcmp(argv[2], "bank") != 0)) { @@ -592,10 +582,8 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); if (strcmp(argv[2], "bank") == 0) { bank = simple_strtoul(argv[3], NULL, 16); @@ -634,10 +622,9 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); + rcode = flash_sect_protect (p, addr_first, addr_last); #endif /* CONFIG_SYS_NO_FLASH */ return rcode; diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index ddc7a05a5b..e50c9de876 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -44,7 +44,6 @@ #endif /* Local functions */ -static void fpga_usage (cmd_tbl_t * cmdtp); static int fpga_get_op (char *opstr); /* Local defines */ @@ -232,8 +231,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) switch (op) { case FPGA_NONE: - fpga_usage (cmdtp); - break; + return cmd_usage(cmdtp); case FPGA_INFO: rc = fpga_info (dev); @@ -312,17 +310,11 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) default: printf ("Unknown operation\n"); - fpga_usage (cmdtp); - break; + return cmd_usage(cmdtp); } return (rc); } -static void fpga_usage (cmd_tbl_t * cmdtp) -{ - cmd_usage(cmdtp); -} - /* * Map op to supported operations. We don't use a table since we * would just have to relocate it from flash anyway. diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index fb9d3b038f..371e022f79 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -184,10 +184,8 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv uint devaddr, alen, length; u_char *memaddr; - if (argc != 5) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 5) + return cmd_usage(cmdtp); /* * I2C chip address @@ -200,10 +198,8 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv */ devaddr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Length is the number of objects, not number of bytes. @@ -240,10 +236,8 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] alen = i2c_dp_last_alen; length = i2c_dp_last_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* @@ -261,10 +255,8 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * If another parameter, it is the length to display. @@ -332,10 +324,8 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] uchar byte; int count; - if ((argc < 4) || (argc > 5)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc < 4) || (argc > 5)) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -347,10 +337,8 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Value to write is always specified. @@ -398,10 +386,8 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ulong crc; ulong err; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -413,10 +399,8 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Count is always specified @@ -462,10 +446,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg int nbytes; extern char console_buffer[]; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); #ifdef CONFIG_BOOT_RETRY_TIME reset_cmd_timeout(); /* got a good command to get here */ @@ -495,10 +477,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); } /* @@ -628,10 +608,8 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] u_char bytes[16]; int delay; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* * Chip is always specified. @@ -643,10 +621,8 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ addr = simple_strtoul(argv[2], NULL, 16); alen = get_alen(argv[2]); - if (alen == 0) { - cmd_usage(cmdtp); - return 1; - } + if (alen == 0) + return cmd_usage(cmdtp); /* * Length is the number of objects, not number of bytes. @@ -784,10 +760,9 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) "32 MiB", "16 MiB", "8 MiB", "4 MiB" }; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + /* * Chip is always specified. */ @@ -1322,12 +1297,10 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) c = find_cmd_tbl(argv[0], &cmd_i2c_sub[0], ARRAY_SIZE(cmd_i2c_sub)); - if (c) { + if (c) return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index d486697bb4..c0fb88dbc7 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -179,8 +179,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"res",3) == 0) { puts ("\nReset IDE" @@ -229,8 +228,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rcode; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"dev",3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -278,8 +276,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ @@ -332,14 +329,12 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("%ld blocks written: %s\n", n, (n==cnt) ? "OK" : "ERROR"); - if (n==cnt) { + if (n==cnt) return 0; - } else { + else return 1; - } } else { - cmd_usage(cmdtp); - rcode = 1; + return cmd_usage(cmdtp); } return rcode; @@ -374,9 +369,8 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); show_boot_progress (-42); - return 1; + return cmd_usage(cmdtp); } show_boot_progress (42); diff --git a/common/cmd_irq.c b/common/cmd_irq.c index 48883289fc..d35a43fc5e 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -27,17 +27,14 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); /* on */ - if (strncmp(argv[1], "on", 2) == 0) { + if (strncmp(argv[1], "on", 2) == 0) enable_interrupts(); - } else { + else disable_interrupts(); - } return 0; } diff --git a/common/cmd_itest.c b/common/cmd_itest.c index e88d6e097c..8dd8927b58 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -165,10 +165,8 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) int value, w; /* Validate arguments */ - if ((argc != 4)){ - cmd_usage(cmdtp); - return 1; - } + if ((argc != 4)) + return cmd_usage(cmdtp); /* Check for a data width specification. * Defaults to long (4) if no specification. diff --git a/common/cmd_load.c b/common/cmd_load.c index 52ed1fa70d..dad03037a0 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -1102,7 +1102,7 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strcmp(argv[1], "on") == 0) hwflow_onoff(1); else - cmd_usage(cmdtp); + return cmd_usage(cmdtp); } printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off"); return 0; diff --git a/common/cmd_log.c b/common/cmd_log.c index 49deddd7f9..0e89357e5d 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -241,12 +241,10 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } } diff --git a/common/cmd_mem.c b/common/cmd_mem.c index bcea3992db..44834ea751 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -76,10 +76,8 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) size = dp_last_size; length = dp_last_length; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { /* New command specified. Check for a size specification. @@ -172,10 +170,8 @@ int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, writeval, count; int size; - if ((argc < 3) || (argc > 4)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc < 3) || (argc > 4)) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -216,10 +212,8 @@ int do_mem_mdc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; ulong count; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); count = simple_strtoul(argv[3], NULL, 10); @@ -245,10 +239,8 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int i; ulong count; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); count = simple_strtoul(argv[3], NULL, 10); @@ -276,10 +268,8 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int size; int rcode = 0; - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -360,10 +350,8 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr, dest, count; int size; - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); /* Check for size specification. */ @@ -484,10 +472,8 @@ int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) volatile ushort *shortp; volatile u_char *cp; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* Check for a size spefication. * Defaults to long if no or incorrect specification. @@ -555,10 +541,8 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) volatile ushort *shortp; volatile u_char *cp; - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); /* Check for a size spefication. * Defaults to long if no or incorrect specification. @@ -990,10 +974,8 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) int nbytes, size; extern char console_buffer[]; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); #ifdef CONFIG_BOOT_RETRY_TIME reset_cmd_timeout(); /* got a good command to get here */ @@ -1095,10 +1077,8 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong crc; ulong *ptr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul (argv[1], NULL, 16); addr += base_address; @@ -1131,9 +1111,8 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char * const *av; if (argc < 3) { - usage: - cmd_usage(cmdtp); - return 1; +usage: + return cmd_usage(cmdtp); } av = argv + 1; @@ -1181,10 +1160,8 @@ int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned int i; u8 output[16]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); len = simple_strtoul(argv[2], NULL, 16); @@ -1206,10 +1183,8 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned int i; u8 output[20]; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], NULL, 16); len = simple_strtoul(argv[2], NULL, 16); @@ -1239,8 +1214,7 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) dst = simple_strtoul(argv[2], NULL, 16); break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return !!gunzip((void *) dst, dst_len, (void *) src, &src_len); diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index eeef2cddab..00180b0f2c 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -37,17 +37,14 @@ int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int num; unsigned int blocking; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); blocking = (unsigned int)simple_strtoul (argv[2], NULL, 16); if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { puts ("Bad number of FSL\n"); - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } switch (fslnum) { @@ -195,18 +192,14 @@ int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int num; unsigned int blocking; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); num = (unsigned int)simple_strtoul (argv[2], NULL, 16); blocking = (unsigned int)simple_strtoul (argv[3], NULL, 16); - if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { - cmd_usage(cmdtp); - return 1; - } + if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) + return cmd_usage(cmdtp); switch (fslnum) { #if (XILINX_FSL_NUMBER > 0) @@ -353,10 +346,9 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) unsigned int reg = 0; unsigned int val = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); val = (unsigned int)simple_strtoul (argv[2], NULL, 16); switch (reg) { diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 1619a2583a..bb941862db 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -301,10 +301,8 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) int rcode = 0; char *devname; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); #if defined(CONFIG_MII_INIT) mii_init (); @@ -431,8 +429,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) else miiphy_set_current_dev (argv[2]); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 8439da2f7d..061b1bbad0 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -32,17 +32,15 @@ int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong start = get_timer(0); ulong delay; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ; while (get_timer(start) < delay) { - if (ctrlc ()) { + if (ctrlc ()) return (-1); - } + udelay (100); } diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 698157f6b8..e5f5e944da 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -32,10 +32,8 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int dev; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "init") == 0) { if (argc == 2) { @@ -46,8 +44,7 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } else if (argc == 3) { dev = (int)simple_strtoul(argv[2], NULL, 10); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (mmc_legacy_init(dev) != 0) { @@ -72,14 +69,12 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif curr_device = dev; } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } printf("mmc%d is current device\n", curr_device); } else { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } return 0; diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 4d7b871528..f19bf41f8e 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -28,10 +28,8 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long cpuid; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); cpuid = simple_strtoul(argv[1], NULL, 10); if (cpuid >= cpu_numcores()) { @@ -42,29 +40,24 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc == 3) { - if (strncmp(argv[2], "reset", 5) == 0) { + if (strncmp(argv[2], "reset", 5) == 0) cpu_reset(cpuid); - } else if (strncmp(argv[2], "status", 6) == 0) { + else if (strncmp(argv[2], "status", 6) == 0) cpu_status(cpuid); - } else if (strncmp(argv[2], "disable", 7) == 0) { + else if (strncmp(argv[2], "disable", 7) == 0) return cpu_disable(cpuid); - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); + return 0; } /* 4 or greater, make sure its release */ - if (strncmp(argv[2], "release", 7) != 0) { - cmd_usage(cmdtp); - return 1; - } + if (strncmp(argv[2], "release", 7) != 0) + return cmd_usage(cmdtp); - if (cpu_release(cpuid, argc - 3, argv + 3)) { - cmd_usage(cmdtp); - return 1; - } + if (cpu_release(cpuid, argc - 3, argv + 3)) + return cmd_usage(cmdtp); return 0; } diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 447486ba29..ceec5a9751 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -1845,8 +1845,7 @@ int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return delete_partition(argv[2]); } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 84b6272950..0f47a258ce 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -275,8 +275,7 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand, return ret; usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } #endif @@ -577,8 +576,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #endif usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, @@ -759,9 +757,8 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_CMD_MTDPARTS) usage: #endif - cmd_usage(cmdtp); show_boot_progress(-53); - return 1; + return cmd_usage(cmdtp); } show_boot_progress(53); diff --git a/common/cmd_net.c b/common/cmd_net.c index 3cdb07fdc7..3ffb9df1de 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -186,9 +186,9 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char * const argv[]) break; - default: cmd_usage(cmdtp); + default: show_boot_progress (-80); - return 1; + return cmd_usage(cmdtp); } show_boot_progress (80); @@ -236,10 +236,8 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return -1; NetPingIP = string_to_ip(argv[1]); - if (NetPingIP == 0) { - cmd_usage(cmdtp); - return -1; - } + if (NetPingIP == 0) + return cmd_usage(cmdtp); if (NetLoop(PING) < 0) { printf("ping failed; host %s is not alive\n", argv[1]); @@ -342,10 +340,8 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_DNS) int do_dns(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc == 1) { - cmd_usage(cmdtp); - return -1; - } + if (argc == 1) + return cmd_usage(cmdtp); /* * We should check for a valid hostname: diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 13325bc836..1198954bb5 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -407,10 +407,8 @@ void forceenv (char *varname, char *varvalue) int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); return _do_setenv (flag, argc, argv); } @@ -433,15 +431,13 @@ int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) local_args[2] = NULL; local_args[3] = NULL; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); + /* Check the syntax */ switch (argc) { case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: /* askenv envname */ sprintf (message, "Please enter '%s':", argv[1]); @@ -503,10 +499,8 @@ int do_editenv(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *init_val; int len; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); /* Set read buffer to initial value or empty sting */ init_val = getenv(argv[1]); diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index a3e46a338f..83d967bd18 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -361,10 +361,7 @@ static int do_onenand_read(cmd_tbl_t * cmdtp, int flag, int argc, char * const a size_t retlen = 0; if (argc < 3) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); s = strchr(argv[0], '.'); if ((s != NULL) && (!strcmp(s, ".oob"))) @@ -391,10 +388,7 @@ static int do_onenand_write(cmd_tbl_t * cmdtp, int flag, int argc, char * const size_t retlen = 0; if (argc < 3) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); addr = (ulong)simple_strtoul(argv[1], NULL, 16); @@ -477,10 +471,7 @@ static int do_onenand_dump(cmd_tbl_t * cmdtp, int flag, int argc, char * const a char *s; if (argc < 2) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); s = strchr(argv[0], '.'); ofs = (int)simple_strtoul(argv[1], NULL, 16); @@ -502,10 +493,7 @@ static int do_onenand_markbad(cmd_tbl_t * cmdtp, int flag, int argc, char * cons argv += 2; if (argc <= 0) - { - cmd_usage(cmdtp); - return 1; - } + return cmd_usage(cmdtp); while (argc > 0) { addr = simple_strtoul(*argv, NULL, 16); @@ -549,12 +537,10 @@ static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[] c = find_cmd_tbl(argv[0], &cmd_onenand_sub[0], ARRAY_SIZE(cmd_onenand_sub)); - if (c) { - return c->cmd(cmdtp, flag, argc, argv); - } else { - cmd_usage(cmdtp); - return 1; - } + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_otp.c b/common/cmd_otp.c index a8c73b5a86..43f7c69f78 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -88,8 +88,7 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc < 4) { usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } prompt_user = false; diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 358ca60b81..4bde059911 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -534,8 +534,7 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /***************************************************/ diff --git a/common/cmd_portio.c b/common/cmd_portio.c index 92d61d206f..4f2f4997b2 100644 --- a/common/cmd_portio.c +++ b/common/cmd_portio.c @@ -43,13 +43,12 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uint size = out_last_size; uint value = out_last_value; - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { - /* New command specified. Check for a size specification. + /* + * New command specified. Check for a size specification. * Defaults to long if no or incorrect specification. */ size = cmd_get_data_size (argv[0], 1); @@ -102,13 +101,12 @@ int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) uint addr = in_last_addr; uint size = in_last_size; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { - /* New command specified. Check for a size specification. + /* + * New command specified. Check for a size specification. * Defaults to long if no or incorrect specification. */ size = cmd_get_data_size (argv[0], 1); diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 2133a1fa4f..ced1d40958 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -56,10 +56,9 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *dev_desc=NULL; int part_length; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + dev = (int)simple_strtoul (argv[2], &ep, 16); dev_desc = get_dev(argv[1],dev); @@ -150,8 +149,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!filename) { diff --git a/common/cmd_sata.c b/common/cmd_sata.c index 7be58e57c6..7efa8597ad 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -77,8 +77,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 0: case 1: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 2: if (strncmp(argv[1],"inf", 3) == 0) { int i; @@ -115,8 +114,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rc; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1], "dev", 3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -147,8 +145,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return rc; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ if (strcmp(argv[1], "read") == 0) { @@ -184,8 +181,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) n, (n == cnt) ? "OK" : "ERROR"); return (n == cnt) ? 0 : 1; } else { - cmd_usage(cmdtp); - rc = 1; + return cmd_usage(cmdtp); } return rc; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 5b2df28dd2..6b937f9ad3 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -229,8 +229,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!boot_device) { @@ -346,7 +345,8 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { switch (argc) { case 0: - case 1: cmd_usage(cmdtp); return 1; + case 1: return cmd_usage(cmdtp); + case 2: if (strncmp(argv[1],"res",3) == 0) { printf("\nReset SCSI\n"); @@ -392,8 +392,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nno SCSI devices available\n"); return 1; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); case 3: if (strncmp(argv[1],"dev",3) == 0) { int dev = (int)simple_strtoul(argv[2], NULL, 10); @@ -421,8 +420,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 1; } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); default: /* at least 4 args */ if (strcmp(argv[1],"read") == 0) { @@ -437,8 +435,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } } /* switch */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /**************************************************************************************** diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index b3e489fbe3..1ff12329bc 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -57,10 +57,8 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int w; /* Validate arguments */ - if ((argc != 5) || (strlen(argv[3]) != 1)) { - cmd_usage(cmdtp); - return 1; - } + if ((argc != 5) || (strlen(argv[3]) != 1)) + return cmd_usage(cmdtp); w = cmd_get_data_size(argv[0], 4); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 4826e9f5ff..6e7be818eb 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -177,8 +177,7 @@ static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ return do_spi_flash_erase(argc - 1, argv + 1); usage: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/common/cmd_strings.c b/common/cmd_strings.c index bbbb6b4da9..144a6c18d7 100644 --- a/common/cmd_strings.c +++ b/common/cmd_strings.c @@ -14,10 +14,8 @@ static char *start_addr, *last_addr; int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc == 1) { - cmd_usage(cmdtp); - return 1; - } + if (argc == 1) + return cmd_usage(cmdtp); if ((flag & CMD_FLAG_REPEAT) == 0) { start_addr = (char *)simple_strtoul(argv[1], NULL, 16); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 2faf8d82ce..77ca0a5f2e 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -442,10 +442,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) ulong addr = 0; int err = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (mtdparts_init() != 0) { printf("Error initializing mtdparts!\n"); @@ -471,10 +469,8 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); /* todo: get dev number for NAND... */ ubi_dev.nr = 0; diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c index 9017041af4..2cab793e6c 100644 --- a/common/cmd_ubifs.c +++ b/common/cmd_ubifs.c @@ -47,10 +47,9 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *vol_name; int ret; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); + vol_name = argv[1]; debug("Using volume %s\n", vol_name); @@ -102,25 +101,19 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return -1; } - if (argc < 3) { - cmd_usage(cmdtp); - return -1; - } + if (argc < 3) + return cmd_usage(cmdtp); addr = simple_strtoul(argv[1], &endp, 16); - if (endp == argv[1]) { - cmd_usage(cmdtp); - return 1; - } + if (endp == argv[1]) + return cmd_usage(cmdtp); filename = argv[2]; if (argc == 4) { size = simple_strtoul(argv[3], &endp, 16); - if (endp == argv[3]) { - cmd_usage(cmdtp); - return 1; - } + if (endp == argv[3]) + return cmd_usage(cmdtp); } debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size); diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 73d74ac055..dc63f244da 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -376,8 +376,7 @@ int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) boot_device = argv[2]; break; default: - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } if (!boot_device) { @@ -516,10 +515,8 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) block_dev_desc_t *stor_dev; #endif - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if ((strncmp(argv[1], "reset", 5) == 0) || (strncmp(argv[1], "start", 5) == 0)) { @@ -699,8 +696,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } #endif /* CONFIG_USB_STORAGE */ - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } #ifdef CONFIG_USB_STORAGE diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index 1429d31167..18c14d1f3b 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -49,10 +49,8 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong bitmap; - if (argc != 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 2) + return cmd_usage(cmdtp); if (argv[1][0] == '/') { /* select bitmap by number */ bitmap = simple_strtoul(argv[1]+1, NULL, 10); diff --git a/common/command.c b/common/command.c index a1fc592c24..30a9801d9f 100644 --- a/common/command.c +++ b/common/command.c @@ -153,7 +153,7 @@ int cmd_usage(cmd_tbl_t *cmdtp) puts (cmdtp->help); putc ('\n'); #endif /* CONFIG_SYS_LONGHELP */ - return 0; + return 1; } #ifdef CONFIG_AUTO_COMPLETE diff --git a/common/env_common.c b/common/env_common.c index 82e4936ced..460309beed 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -227,7 +227,7 @@ void env_relocate (void) #endif if (gd->env_valid == 0) { -#if defined(CONFIG_GTH) || defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */ +#if defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */ puts ("Using default environment\n\n"); #else puts ("*** Warning - bad CRC, using default environment\n\n"); diff --git a/common/fdt_support.c b/common/fdt_support.c index 4d87135cb7..718b635d99 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -2,6 +2,8 @@ * (C) Copyright 2007 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com * + * Copyright 2010 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -861,3 +863,292 @@ void fdt_del_node_and_alias(void *blob, const char *alias) off = fdt_path_offset(blob, "/aliases"); fdt_delprop(blob, off, alias); } + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const __be32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | be32_to_cpu(*(cell++)); + return r; +} + +static int of_n_cells(const void *blob, int nodeoffset, const char *name) +{ + int np; + const int *ip; + + do { + np = fdt_parent_offset(blob, nodeoffset); + + if (np >= 0) + nodeoffset = np; + ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL); + if (ip) + return be32_to_cpup(ip); + } while (np >= 0); + + /* No #<NAME>-cells property for the root node */ + return 1; +} + +int of_n_addr_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#address-cells"); +} + +int of_n_size_cells(const void *blob, int nodeoffset) +{ + return of_n_cells(blob, nodeoffset, "#size-cells"); +} + +#define PRu64 "%llx" + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_BAD_ADDR ((u64)-1) +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, const u32 *addr, int na) +{ + printf("%s", s); + while(na--) + printf(" %08x", *(addr++)); + printf("\n"); +} +#else +static void of_dump_addr(const char *s, const u32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + void (*count_cells)(void *blob, int offset, + int *addrc, int *sizec); + u64 (*map)(u32 *addr, const u32 *range, + int na, int ns, int pna); + int (*translate)(u32 *addr, u64 offset, int na); +}; + +/* Default translator (generic bus) */ +static void of_bus_default_count_cells(void *blob, int offset, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = of_n_addr_cells(blob, offset); + if (sizec) + *sizec = of_n_size_cells(blob, offset); +} + +static u64 of_bus_default_map(u32 *addr, const u32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(u32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = a >> 32; + addr[na - 1] = a & 0xffffffffu; + + return 0; +} + +/* Array of bus specific translators */ +static struct of_bus of_busses[] = { + /* Default */ + { + .name = "default", + .addresses = "reg", + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + }, +}; + +static int of_translate_one(void * blob, int parent, struct of_bus *bus, + struct of_bus *pbus, u32 *addr, + int na, int ns, int pna, const char *rprop) +{ + const u32 *ranges; + int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + */ + ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen); + if (ranges == NULL || rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + debug("OF: no ranges, 1:1 translation\n"); + goto finish; + } + + debug("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + debug("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + debug("OF: with offset: "PRu64"\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr, + const char *rprop) +{ + int parent; + struct of_bus *bus, *pbus; + u32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + debug("OF: ** translation for device %s **\n", + fdt_get_name(blob, node_offset, NULL)); + + /* Get parent & match bus type */ + parent = fdt_parent_offset(blob, node_offset); + if (parent < 0) + goto bail; + bus = &of_busses[0]; + + /* Cound address cells & copy address locally */ + bus->count_cells(blob, node_offset, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, fdt_get_name(blob, parent, NULL)); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + node_offset = parent; + parent = fdt_parent_offset(blob, node_offset); + + /* If root, we have finished */ + if (parent < 0) { + debug("OF: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = &of_busses[0]; + pbus->count_cells(blob, node_offset, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printf("%s: Bad cell count for %s\n", __FUNCTION__, + fdt_get_name(blob, node_offset, NULL)); + break; + } + + debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, fdt_get_name(blob, parent, NULL)); + + /* Apply bus translation */ + if (of_translate_one(blob, node_offset, bus, pbus, + addr, na, ns, pna, rprop)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + + return result; +} + +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr) +{ + return __of_translate_address(blob, node_offset, in_addr, "ranges"); +} + +/** + * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and + * who's reg property matches a physical cpu address + * + * @blob: ptr to device tree + * @compat: compatiable string to match + * @compat_off: property name + * + */ +int fdt_node_offset_by_compat_reg(void *blob, const char *compat, + phys_addr_t compat_off) +{ + int len, off = fdt_node_offset_by_compatible(blob, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); + if (reg) { + if (compat_off == fdt_translate_address(blob, off, reg)) + return off; + } + off = fdt_node_offset_by_compatible(blob, off, compat); + } + + return -FDT_ERR_NOTFOUND; +} + + diff --git a/common/hush.c b/common/hush.c index 8a74d225e9..4dd9513b03 100644 --- a/common/hush.c +++ b/common/hush.c @@ -1694,10 +1694,8 @@ static int run_pipe_real(struct pipe *pi) } #endif /* found - check max args */ - if ((child->argc - i) > cmdtp->maxargs) { - cmd_usage(cmdtp); - return -1; - } + if ((child->argc - i) > cmdtp->maxargs) + return cmd_usage(cmdtp); #endif child->argv+=i; /* XXX horrible hack */ #ifndef __U_BOOT__ diff --git a/common/main.c b/common/main.c index 20090ee6aa..54ef79e264 100644 --- a/common/main.c +++ b/common/main.c @@ -1418,10 +1418,8 @@ int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int i; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); for (i=1; i<argc; ++i) { char *arg; diff --git a/common/usb_storage.c b/common/usb_storage.c index 4fc01a22b4..76949b85c0 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -181,7 +181,7 @@ block_dev_desc_t *usb_stor_get_dev(int index) void usb_show_progress(void) { - printf("."); + debug("."); } /******************************************************************************* @@ -224,10 +224,11 @@ int usb_stor_scan(int mode) for (i = 0; i < USB_MAX_STOR_DEV; i++) { memset(&usb_dev_desc[i], 0, sizeof(block_dev_desc_t)); - usb_dev_desc[i].target = 0xff; usb_dev_desc[i].if_type = IF_TYPE_USB; usb_dev_desc[i].dev = i; usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN; + usb_dev_desc[i].target = 0xff; + usb_dev_desc[i].type = DEV_TYPE_UNKNOWN; usb_dev_desc[i].block_read = usb_stor_read; usb_dev_desc[i].block_write = usb_stor_write; } @@ -1080,7 +1081,7 @@ retry_it: usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_READ_BLK) - printf("\n"); + debug("\n"); return blkcnt; } @@ -1160,7 +1161,7 @@ retry_it: usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_WRITE_BLK) - printf("\n"); + debug("\n"); return blkcnt; } diff --git a/disk/part_dos.c b/disk/part_dos.c index 887b75ec88..2de1bb83b7 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -77,8 +77,10 @@ static int test_block_type(unsigned char *buffer) (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) { return (-1); } /* no DOS Signature at all */ - if(strncmp((char *)&buffer[DOS_PBR_FSTYPE_OFFSET],"FAT",3)==0) + if (strncmp((char *)&buffer[DOS_PBR_FSTYPE_OFFSET],"FAT",3)==0 || + strncmp((char *)&buffer[DOS_PBR32_FSTYPE_OFFSET],"FAT32",5)==0) { return DOS_PBR; /* is PBR */ + } return DOS_MBR; /* Is MBR */ } diff --git a/disk/part_dos.h b/disk/part_dos.h index ac93f20b3e..195a32cb38 100644 --- a/disk/part_dos.h +++ b/disk/part_dos.h @@ -28,13 +28,14 @@ #ifdef CONFIG_ISO_PARTITION /* Make the buffers bigger if ISO partition support is enabled -- CD-ROMS have 2048 byte blocks */ -#define DEFAULT_SECTOR_SIZE 2048 +#define DEFAULT_SECTOR_SIZE 2048 #else #define DEFAULT_SECTOR_SIZE 512 #endif #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_PBR_FSTYPE_OFFSET 0x36 +#define DOS_PBR32_FSTYPE_OFFSET 0x52 #define DOS_PBR_MEDIA_TYPE_OFFSET 0x15 #define DOS_MBR 0 #define DOS_PBR 1 diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index d1065f4f8e..6e82bd66af 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -164,8 +164,7 @@ int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!c || !((argc == (c->maxargs)) || (((int)c->cmd == PCA953X_CMD_DEVICE) && (argc == (c->maxargs - 1))))) { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* arg2 used as chip number or pin number */ diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index e0cf1e10db..1a1809ac16 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -51,6 +51,58 @@ #endif #include <i2c.h> +#if defined(CONFIG_SOFT_I2C_GPIO_SCL) +# include <asm/gpio.h> + +# ifndef I2C_GPIO_SYNC +# define I2C_GPIO_SYNC +# endif + +# ifndef I2C_INIT +# define I2C_INIT \ + do { \ + gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, "soft_i2c"); \ + gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, "soft_i2c"); \ + } while (0) +# endif + +# ifndef I2C_ACTIVE +# define I2C_ACTIVE do { } while (0) +# endif + +# ifndef I2C_TRISTATE +# define I2C_TRISTATE do { } while (0) +# endif + +# ifndef I2C_READ +# define I2C_READ gpio_get_value(CONFIG_SOFT_I2C_GPIO_SDA) +# endif + +# ifndef I2C_SDA +# define I2C_SDA(bit) \ + do { \ + if (bit) \ + gpio_direction_input(CONFIG_SOFT_I2C_GPIO_SDA); \ + else \ + gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SDA, 0); \ + I2C_GPIO_SYNC; \ + } while (0) +# endif + +# ifndef I2C_SCL +# define I2C_SCL(bit) \ + do { \ + gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SCL, bit); \ + I2C_GPIO_SYNC; \ + } while (0) +# endif + +# ifndef I2C_DELAY +# define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ +# endif + +#endif + /* #define DEBUG_I2C */ #ifdef DEBUG_I2C diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index 5b33c1ffce..aa893c35fb 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -294,8 +294,7 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!c || !((argc == (c->maxargs)) || (((int)c->cmd == DS4510_CMD_DEVICE) && (argc == (c->maxargs - 1))))) { - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } /* arg2 used as chip addr and pin number */ @@ -366,14 +365,12 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_CMD_DS4510_MEM /* Only eeprom, seeprom, and sram commands should make it here */ - if (strcmp(argv[2], "read") == 0) { + if (strcmp(argv[2], "read") == 0) rw_func = ds4510_mem_read; - } else if (strcmp(argv[2], "write") == 0) { + else if (strcmp(argv[2], "write") == 0) rw_func = ds4510_mem_write; - } else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); addr = simple_strtoul(argv[3], NULL, 16); off += simple_strtoul(argv[4], NULL, 16); diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 628bd5964c..65890769ac 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -43,7 +43,8 @@ DECLARE_GLOBAL_DATA_PTR; defined(CONFIG_P1013) || defined(CONFIG_P1022) || \ defined(CONFIG_P2010) || defined(CONFIG_P2020) #define FSL_HW_NUM_LAWS 12 -#elif defined(CONFIG_PPC_P4080) +#elif defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P4080) || \ + defined(CONFIG_PPC_P5020) #define FSL_HW_NUM_LAWS 32 #else #error FSL_HW_NUM_LAWS not defined for this platform diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c index 274327f470..dca0a1d57e 100644 --- a/drivers/misc/fsl_pmic.c +++ b/drivers/misc/fsl_pmic.c @@ -163,26 +163,22 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) u32 val; /* at least two arguments please */ - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); cmd = argv[1]; if (strcmp(cmd, "dump") == 0) { - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); + nregs = simple_strtoul(argv[2], NULL, 16); pmic_dump(nregs); return 0; } if (strcmp(cmd, "write") == 0) { - if (argc < 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 4) + return cmd_usage(cmdtp); + nregs = simple_strtoul(argv[2], NULL, 16); val = simple_strtoul(argv[3], NULL, 16); pmic_reg_write(nregs, val); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 5a63fa2168..001e6eb900 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -510,18 +510,25 @@ void fsl_pci_config_unlock(struct pci_controller *hose) #include <libfdt.h> #include <fdt_support.h> -void ft_fsl_pci_setup(void *blob, const char *pci_alias, - struct pci_controller *hose) +void ft_fsl_pci_setup(void *blob, const char *pci_compat, + struct pci_controller *hose, unsigned long ctrl_addr) { - int off = fdt_path_offset(blob, pci_alias); + int off; u32 bus_range[2]; + phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr; + + /* convert ctrl_addr to true physical address */ + p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR; + p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS; + + off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr); if (off < 0) return; /* We assume a cfg_addr not being set means we didn't setup the controller */ if ((hose == NULL) || (hose->cfg_addr == NULL)) { - fdt_del_node_and_alias(blob, pci_alias); + fdt_del_node(blob, off); } else { bus_range[0] = 0; bus_range[1] = hose->last_busno - hose->first_busno; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 63cc68e307..c4ec2f4af8 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -440,10 +440,8 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "fw") == 0) { addr = simple_strtoul(argv[2], NULL, 16); @@ -471,8 +469,7 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return qe_upload_firmware((const struct qe_firmware *) addr); } - cmd_usage(cmdtp); - return 1; + return cmd_usage(cmdtp); } U_BOOT_CMD( diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 96d52fbaea..fae54177cb 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1119,7 +1119,7 @@ int video_display_bitmap (ulong bmp_image, int x, int y) case 8: padded_line -= width; if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX) { - /* Copy colormap */ + /* Copy colormap */ for (xcount = 0; xcount < colors; ++xcount) { cte = bmp->color_table[xcount]; video_set_lut (xcount, cte.red, cte.green, cte.blue); @@ -1321,11 +1321,11 @@ void logo_plot (void *screen, int width, int x, int y) #ifdef CONFIG_VIDEO_BMP_LOGO source = bmp_logo_bitmap; - /* Allocate temporary space for computing colormap */ + /* Allocate temporary space for computing colormap */ logo_red = malloc (BMP_LOGO_COLORS); logo_green = malloc (BMP_LOGO_COLORS); logo_blue = malloc (BMP_LOGO_COLORS); - /* Compute color map */ + /* Compute color map */ for (i = 0; i < VIDEO_LOGO_COLORS; i++) { logo_red[i] = (bmp_logo_palette[i] & 0x0f00) >> 4; logo_green[i] = (bmp_logo_palette[i] & 0x00f0); diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 6b3a2742e2..003666eaec 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -34,8 +34,7 @@ /* * Convert a string to lowercase. */ -static void -downcase(char *str) +static void downcase (char *str) { while (*str != '\0') { TOLOWER(*str); @@ -43,43 +42,49 @@ downcase(char *str) } } -static block_dev_desc_t *cur_dev = NULL; +static block_dev_desc_t *cur_dev = NULL; + static unsigned long part_offset = 0; + static int cur_part = 1; #define DOS_PART_TBL_OFFSET 0x1be #define DOS_PART_MAGIC_OFFSET 0x1fe #define DOS_FS_TYPE_OFFSET 0x36 +#define DOS_FS32_TYPE_OFFSET 0x52 -int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) +static int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) { - startblock += part_offset; if (cur_dev == NULL) return -1; + + startblock += part_offset; + if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev - , startblock, getsize, (unsigned long *)bufptr); + return cur_dev->block_read(cur_dev->dev, startblock, getsize, + (unsigned long *) bufptr); } return -1; } - -int -fat_register_device(block_dev_desc_t *dev_desc, int part_no) +int fat_register_device (block_dev_desc_t * dev_desc, int part_no) { unsigned char buffer[SECTOR_SIZE]; + disk_partition_t info; if (!dev_desc->block_read) return -1; + cur_dev = dev_desc; /* check if we have a MBR (on floppies we have only a PBR) */ - if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { - printf ("** Can't read from device %d **\n", dev_desc->dev); + if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *)buffer) != 1) { + printf("** Can't read from device %d **\n", + dev_desc->dev); return -1; } if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || - buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { + buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) { /* no signature found */ return -1; } @@ -90,22 +95,24 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) ) - /* First we assume, there is a MBR */ - if (!get_partition_info (dev_desc, part_no, &info)) { + /* First we assume there is a MBR */ + if (!get_partition_info(dev_desc, part_no, &info)) { part_offset = info.start; cur_part = part_no; - } else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) { + } else if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3) == 0) || + (strncmp((char *)&buffer[DOS_FS32_TYPE_OFFSET], "FAT32", 5) == 0)) { /* ok, we assume we are on a PBR only */ cur_part = 1; part_offset = 0; } else { - printf ("** Partition %d not valid on device %d **\n", - part_no, dev_desc->dev); + printf("** Partition %d not valid on device %d **\n", + part_no, dev_desc->dev); return -1; } #else - if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { + if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3) == 0) || + (strncmp((char *)&buffer[DOS_FS32_TYPE_OFFSET], "FAT32", 5) == 0)) { /* ok, we assume we are on a PBR only */ cur_part = 1; part_offset = 0; @@ -123,18 +130,17 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) return 0; } - /* * Get the first occurence of a directory delimiter ('/' or '\') in a string. * Return index into string if found, -1 otherwise. */ -static int -dirdelim(char *str) +static int dirdelim (char *str) { char *start = str; while (*str != '\0') { - if (ISDIRDELIM(*str)) return str - start; + if (ISDIRDELIM(*str)) + return str - start; str++; } return -1; @@ -147,7 +153,7 @@ static void get_name (dir_entry *dirent, char *s_name) { char *ptr; - memcpy (s_name, dirent->name, 8); + memcpy(s_name, dirent->name, 8); s_name[8] = '\0'; ptr = s_name; while (*ptr && *ptr != ' ') @@ -155,7 +161,7 @@ static void get_name (dir_entry *dirent, char *s_name) if (dirent->ext[0] && dirent->ext[0] != ' ') { *ptr = '.'; ptr++; - memcpy (ptr, dirent->ext, 3); + memcpy(ptr, dirent->ext, 3); ptr[3] = '\0'; while (*ptr && *ptr != ' ') ptr++; @@ -165,19 +171,19 @@ static void get_name (dir_entry *dirent, char *s_name) *s_name = '\0'; else if (*s_name == aRING) *s_name = DELETED_FLAG; - downcase (s_name); + downcase(s_name); } /* * Get the entry at index 'entry' in a FAT (12/16/32) table. * On failure 0x00 is returned. */ -static __u32 -get_fatent(fsdata *mydata, __u32 entry) +static __u32 get_fatent (fsdata *mydata, __u32 entry) { __u32 bufnum; - __u32 offset; + __u32 off16, offset; __u32 ret = 0x00; + __u16 val1, val2; switch (mydata->fatsize) { case 32: @@ -198,9 +204,12 @@ get_fatent(fsdata *mydata, __u32 entry) return ret; } + debug("FAT%d: entry: 0x%04x = %d, offset: 0x%04x = %d\n", + mydata->fatsize, entry, entry, offset, offset); + /* Read a new block of FAT entries into the cache. */ if (bufnum != mydata->fatbufnum) { - int getsize = FATBUFSIZE/FS_BLOCK_SIZE; + int getsize = FATBUFSIZE / FS_BLOCK_SIZE; __u8 *bufptr = mydata->fatbuf; __u32 fatlength = mydata->fatlength; __u32 startblock = bufnum * FATBUFBLOCKS; @@ -208,9 +217,10 @@ get_fatent(fsdata *mydata, __u32 entry) fatlength *= SECTOR_SIZE; /* We want it in bytes now */ startblock += mydata->fat_sect; /* Offset from start of disk */ - if (getsize > fatlength) getsize = fatlength; + if (getsize > fatlength) + getsize = fatlength; if (disk_read(startblock, getsize, bufptr) < 0) { - FAT_DPRINT("Error reading FAT blocks\n"); + debug("Error reading FAT blocks\n"); return ret; } mydata->fatbufnum = bufnum; @@ -219,79 +229,81 @@ get_fatent(fsdata *mydata, __u32 entry) /* Get the actual entry from the table */ switch (mydata->fatsize) { case 32: - ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]); + ret = FAT2CPU32(((__u32 *) mydata->fatbuf)[offset]); break; case 16: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]); + ret = FAT2CPU16(((__u16 *) mydata->fatbuf)[offset]); break; - case 12: { - __u32 off16 = (offset*3)/4; - __u16 val1, val2; + case 12: + off16 = (offset * 3) / 4; switch (offset & 0x3) { case 0: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + ret = FAT2CPU16(((__u16 *) mydata->fatbuf)[off16]); ret &= 0xfff; break; case 1: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + val1 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); val1 &= 0xf000; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); + val2 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16 + 1]); val2 &= 0x00ff; ret = (val2 << 4) | (val1 >> 12); break; case 2: - val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]); + val1 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); val1 &= 0xff00; - val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]); + val2 = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16 + 1]); val2 &= 0x000f; ret = (val2 << 8) | (val1 >> 8); break; case 3: - ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);; + ret = FAT2CPU16(((__u16 *)mydata->fatbuf)[off16]); ret = (ret & 0xfff0) >> 4; break; default: break; } + break; } - break; - } - FAT_DPRINT("ret: %d, offset: %d\n", ret, offset); + debug("FAT%d: ret: %08x, offset: %04x\n", + mydata->fatsize, ret, offset); return ret; } - /* * Read at most 'size' bytes from the specified cluster into 'buffer'. * Return 0 on success, -1 otherwise. */ static int -get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) +get_cluster (fsdata *mydata, __u32 clustnum, __u8 *buffer, + unsigned long size) { int idx = 0; __u32 startsect; if (clustnum > 0) { - startsect = mydata->data_begin + clustnum*mydata->clust_size; + startsect = mydata->data_begin + + clustnum * mydata->clust_size; } else { startsect = mydata->rootdir_sect; } - FAT_DPRINT("gc - clustnum: %d, startsect: %d\n", clustnum, startsect); - if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) { - FAT_DPRINT("Error reading data\n"); + debug("gc - clustnum: %d, startsect: %d\n", clustnum, startsect); + + if (disk_read(startsect, size / FS_BLOCK_SIZE, buffer) < 0) { + debug("Error reading data\n"); return -1; } - if(size % FS_BLOCK_SIZE) { + if (size % FS_BLOCK_SIZE) { __u8 tmpbuf[FS_BLOCK_SIZE]; - idx= size/FS_BLOCK_SIZE; + + idx = size / FS_BLOCK_SIZE; if (disk_read(startsect + idx, 1, tmpbuf) < 0) { - FAT_DPRINT("Error reading data\n"); + debug("Error reading data\n"); return -1; } - buffer += idx*FS_BLOCK_SIZE; + buffer += idx * FS_BLOCK_SIZE; memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE); return 0; @@ -300,15 +312,14 @@ get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) return 0; } - /* * Read at most 'maxsize' bytes from the file associated with 'dentptr' * into 'buffer'. * Return the number of bytes read or -1 on fatal errors. */ static long -get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, - unsigned long maxsize) +get_contents (fsdata *mydata, dir_entry *dentptr, __u8 *buffer, + unsigned long maxsize) { unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0; unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE; @@ -316,161 +327,174 @@ get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, __u32 endclust, newclust; unsigned long actsize; - FAT_DPRINT("Filesize: %ld bytes\n", filesize); + debug("Filesize: %ld bytes\n", filesize); + + if (maxsize > 0 && filesize > maxsize) + filesize = maxsize; - if (maxsize > 0 && filesize > maxsize) filesize = maxsize; + debug("%ld bytes\n", filesize); - FAT_DPRINT("Reading: %ld bytes\n", filesize); + actsize = bytesperclust; + endclust = curclust; - actsize=bytesperclust; - endclust=curclust; do { /* search for consecutive clusters */ - while(actsize < filesize) { + while (actsize < filesize) { newclust = get_fatent(mydata, endclust); - if((newclust -1)!=endclust) + if ((newclust - 1) != endclust) goto getit; if (CHECK_CLUST(newclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", newclust); - FAT_DPRINT("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", newclust); + debug("Invalid FAT entry\n"); return gotsize; } - endclust=newclust; - actsize+= bytesperclust; + endclust = newclust; + actsize += bytesperclust; } + /* actsize >= file size */ actsize -= bytesperclust; + /* get remaining clusters */ if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } + /* get remaining bytes */ gotsize += (int)actsize; filesize -= actsize; buffer += actsize; - actsize= filesize; + actsize = filesize; if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } - gotsize+=actsize; + gotsize += actsize; return gotsize; getit: if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - FAT_ERROR("Error reading cluster\n"); + printf("Error reading cluster\n"); return -1; } gotsize += (int)actsize; filesize -= actsize; buffer += actsize; + curclust = get_fatent(mydata, endclust); if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); return gotsize; } - actsize=bytesperclust; - endclust=curclust; + actsize = bytesperclust; + endclust = curclust; } while (1); } - #ifdef CONFIG_SUPPORT_VFAT /* * Extract the file name information from 'slotptr' into 'l_name', * starting at l_name[*idx]. * Return 1 if terminator (zero byte) is found, 0 otherwise. */ -static int -slot2str(dir_slot *slotptr, char *l_name, int *idx) +static int slot2str (dir_slot *slotptr, char *l_name, int *idx) { int j; for (j = 0; j <= 8; j += 2) { l_name[*idx] = slotptr->name0_4[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } for (j = 0; j <= 10; j += 2) { l_name[*idx] = slotptr->name5_10[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } for (j = 0; j <= 2; j += 2) { l_name[*idx] = slotptr->name11_12[j]; - if (l_name[*idx] == 0x00) return 1; + if (l_name[*idx] == 0x00) + return 1; (*idx)++; } return 0; } - /* * Extract the full long filename starting at 'retdent' (which is really * a slot) into 'l_name'. If successful also copy the real directory entry * into 'retdent' * Return 0 on success, -1 otherwise. */ -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 get_vfatname_block[MAX_CLUSTSIZE]; + static int -get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, - dir_entry *retdent, char *l_name) +get_vfatname (fsdata *mydata, int curclust, __u8 *cluster, + dir_entry *retdent, char *l_name) { dir_entry *realdent; - dir_slot *slotptr = (dir_slot*) retdent; - __u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE; - __u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff; + dir_slot *slotptr = (dir_slot *)retdent; + __u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE; + __u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff; int idx = 0; - while ((__u8*)slotptr < nextclust) { - if (counter == 0) break; + while ((__u8 *)slotptr < nextclust) { + if (counter == 0) + break; if (((slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff) != counter) return -1; slotptr++; counter--; } - if ((__u8*)slotptr >= nextclust) { + if ((__u8 *)slotptr >= nextclust) { dir_slot *slotptr2; slotptr--; curclust = get_fatent(mydata, curclust); if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT("curclust: 0x%x\n", curclust); - FAT_ERROR("Invalid FAT entry\n"); + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); return -1; } + if (get_cluster(mydata, curclust, get_vfatname_block, mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT("Error: reading directory block\n"); + debug("Error: reading directory block\n"); return -1; } - slotptr2 = (dir_slot*) get_vfatname_block; - while (slotptr2->id > 0x01) { + + slotptr2 = (dir_slot *)get_vfatname_block; + while (slotptr2->id > 0x01) slotptr2++; - } + /* Save the real directory entry */ - realdent = (dir_entry*)slotptr2 + 1; - while ((__u8*)slotptr2 >= get_vfatname_block) { + realdent = (dir_entry *)slotptr2 + 1; + while ((__u8 *)slotptr2 >= get_vfatname_block) { slot2str(slotptr2, l_name, &idx); slotptr2--; } } else { /* Save the real directory entry */ - realdent = (dir_entry*)slotptr; + realdent = (dir_entry *)slotptr; } do { slotptr--; - if (slot2str(slotptr, l_name, &idx)) break; + if (slot2str(slotptr, l_name, &idx)) + break; } while (!(slotptr->id & LAST_LONG_ENTRY_MASK)); l_name[idx] = '\0'; - if (*l_name == DELETED_FLAG) *l_name = '\0'; - else if (*l_name == aRING) *l_name = DELETED_FLAG; + if (*l_name == DELETED_FLAG) + *l_name = '\0'; + else if (*l_name == aRING) + *l_name = DELETED_FLAG; downcase(l_name); /* Return the real directory entry */ @@ -479,214 +503,226 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, return 0; } - /* Calculate short name checksum */ -static __u8 -mkcksum(const char *str) +static __u8 mkcksum (const char *str) { int i; + __u8 ret = 0; for (i = 0; i < 11; i++) { - ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i]; + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i]; } return ret; } -#endif - +#endif /* CONFIG_SUPPORT_VFAT */ /* * Get the directory entry associated with 'filename' from the directory * starting at 'startsect' */ -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 get_dentfromdir_block[MAX_CLUSTSIZE]; -static dir_entry *get_dentfromdir (fsdata * mydata, int startsect, - char *filename, dir_entry * retdent, + +static dir_entry *get_dentfromdir (fsdata *mydata, int startsect, + char *filename, dir_entry *retdent, int dols) { - __u16 prevcksum = 0xffff; - __u32 curclust = START (retdent); - int files = 0, dirs = 0; + __u16 prevcksum = 0xffff; + __u32 curclust = START(retdent); + int files = 0, dirs = 0; - FAT_DPRINT ("get_dentfromdir: %s\n", filename); - while (1) { - dir_entry *dentptr; - int i; + debug("get_dentfromdir: %s\n", filename); + + while (1) { + dir_entry *dentptr; + + int i; + + if (get_cluster(mydata, curclust, get_dentfromdir_block, + mydata->clust_size * SECTOR_SIZE) != 0) { + debug("Error: reading directory block\n"); + return NULL; + } + + dentptr = (dir_entry *)get_dentfromdir_block; + + for (i = 0; i < DIRENTSPERCLUST; i++) { + char s_name[14], l_name[256]; - if (get_cluster (mydata, curclust, get_dentfromdir_block, - mydata->clust_size * SECTOR_SIZE) != 0) { - FAT_DPRINT ("Error: reading directory block\n"); - return NULL; - } - dentptr = (dir_entry *) get_dentfromdir_block; - for (i = 0; i < DIRENTSPERCLUST; i++) { - char s_name[14], l_name[256]; - - l_name[0] = '\0'; - if (dentptr->name[0] == DELETED_FLAG) { - dentptr++; - continue; - } - if ((dentptr->attr & ATTR_VOLUME)) { + l_name[0] = '\0'; + if (dentptr->name[0] == DELETED_FLAG) { + dentptr++; + continue; + } + if ((dentptr->attr & ATTR_VOLUME)) { #ifdef CONFIG_SUPPORT_VFAT - if ((dentptr->attr & ATTR_VFAT) && - (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { - prevcksum = ((dir_slot *) dentptr) - ->alias_checksum; - get_vfatname (mydata, curclust, get_dentfromdir_block, - dentptr, l_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (l_name[0] != 0) { - files++; - doit = 1; - } + if ((dentptr->attr & ATTR_VFAT) && + (dentptr-> name[0] & LAST_LONG_ENTRY_MASK)) { + prevcksum = ((dir_slot *)dentptr)->alias_checksum; + get_vfatname(mydata, curclust, + get_dentfromdir_block, + dentptr, l_name); + if (dols) { + int isdir; + char dirc; + int doit = 0; + + isdir = (dentptr->attr & ATTR_DIR); + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (l_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + l_name, + dirc); + } else { + printf(" %s%c\n", + l_name, + dirc); + } + } + dentptr++; + continue; + } + debug("vfatname: |%s|\n", l_name); + } else +#endif + { + /* Volume label or VFAT entry */ + dentptr++; + continue; + } } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), - l_name, dirc); - } else { - printf (" %s%c\n", l_name, dirc); - } + if (dentptr->name[0] == 0) { + if (dols) { + printf("\n%d file(s), %d dir(s)\n\n", + files, dirs); + } + debug("Dentname == NULL - %d\n", i); + return NULL; } - dentptr++; - continue; - } - FAT_DPRINT ("vfatname: |%s|\n", l_name); - } else -#endif - { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - } - if (dentptr->name[0] == 0) { - if (dols) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - } - FAT_DPRINT ("Dentname == NULL - %d\n", i); - return NULL; - } #ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } + if (dols && mkcksum(dentptr->name) == prevcksum) { + dentptr++; + continue; + } #endif - get_name (dentptr, s_name); - if (dols) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } + get_name(dentptr, s_name); + if (dols) { + int isdir = (dentptr->attr & ATTR_DIR); + char dirc; + int doit = 0; + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (s_name[0] != 0) { + files++; + doit = 1; + } + } + + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + s_name, dirc); + } else { + printf(" %s%c\n", + s_name, dirc); + } + } + + dentptr++; + continue; + } + + if (strcmp(filename, s_name) + && strcmp(filename, l_name)) { + debug("Mismatch: |%s|%s|\n", s_name, l_name); + dentptr++; + continue; + } + + memcpy(retdent, dentptr, sizeof(dir_entry)); + + debug("DentName: %s", s_name); + debug(", start: 0x%x", START(dentptr)); + debug(", size: 0x%x %s\n", + FAT2CPU32(dentptr->size), + (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); + + return retdent; } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } + + curclust = get_fatent(mydata, curclust); + if (CHECK_CLUST(curclust, mydata->fatsize)) { + debug("curclust: 0x%x\n", curclust); + printf("Invalid FAT entry\n"); + return NULL; } - dentptr++; - continue; - } - if (strcmp (filename, s_name) && strcmp (filename, l_name)) { - FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - memcpy (retdent, dentptr, sizeof (dir_entry)); - - FAT_DPRINT ("DentName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), - (dentptr->attr & ATTR_DIR) ? "(DIR)" : ""); - - return retdent; - } - curclust = get_fatent (mydata, curclust); - if (CHECK_CLUST(curclust, mydata->fatsize)) { - FAT_DPRINT ("curclust: 0x%x\n", curclust); - FAT_ERROR ("Invalid FAT entry\n"); - return NULL; - } - } - - return NULL; -} + } + return NULL; +} /* * Read boot sector and volume info from a FAT filesystem */ static int -read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) +read_bootsectandvi (boot_sector *bs, volume_info *volinfo, int *fatsize) { __u8 block[FS_BLOCK_SIZE]; + volume_info *vistart; - if (disk_read(0, 1, block) < 0) { - FAT_DPRINT("Error: reading block\n"); + if (disk_read (0, 1, block) < 0) { + debug("Error: reading block\n"); return -1; } memcpy(bs, block, sizeof(boot_sector)); - bs->reserved = FAT2CPU16(bs->reserved); - bs->fat_length = FAT2CPU16(bs->fat_length); - bs->secs_track = FAT2CPU16(bs->secs_track); - bs->heads = FAT2CPU16(bs->heads); -#if 0 /* UNUSED */ - bs->hidden = FAT2CPU32(bs->hidden); -#endif - bs->total_sect = FAT2CPU32(bs->total_sect); + bs->reserved = FAT2CPU16(bs->reserved); + bs->fat_length = FAT2CPU16(bs->fat_length); + bs->secs_track = FAT2CPU16(bs->secs_track); + bs->heads = FAT2CPU16(bs->heads); + bs->total_sect = FAT2CPU32(bs->total_sect); /* FAT32 entries */ if (bs->fat_length == 0) { /* Assume FAT32 */ bs->fat32_length = FAT2CPU32(bs->fat32_length); - bs->flags = FAT2CPU16(bs->flags); + bs->flags = FAT2CPU16(bs->flags); bs->root_cluster = FAT2CPU32(bs->root_cluster); - bs->info_sector = FAT2CPU16(bs->info_sector); - bs->backup_boot = FAT2CPU16(bs->backup_boot); - vistart = (volume_info*) (block + sizeof(boot_sector)); + bs->info_sector = FAT2CPU16(bs->info_sector); + bs->backup_boot = FAT2CPU16(bs->backup_boot); + vistart = (volume_info *)(block + sizeof(boot_sector)); *fatsize = 32; } else { - vistart = (volume_info*) &(bs->fat32_length); + vistart = (volume_info *)&(bs->fat32_length); *fatsize = 0; } memcpy(volinfo, vistart, sizeof(volume_info)); if (*fatsize == 32) { - if (strncmp(FAT32_SIGN, vistart->fs_type, SIGNLEN) == 0) { + if (strncmp(FAT32_SIGN, vistart->fs_type, SIGNLEN) == 0) return 0; - } } else { if (strncmp(FAT12_SIGN, vistart->fs_type, SIGNLEN) == 0) { *fatsize = 12; @@ -698,262 +734,338 @@ read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize) } } - FAT_DPRINT("Error: broken fs_type sign\n"); + debug("Error: broken fs_type sign\n"); return -1; } -__attribute__ ((__aligned__(__alignof__(dir_entry)))) +__attribute__ ((__aligned__ (__alignof__ (dir_entry)))) __u8 do_fat_read_block[MAX_CLUSTSIZE]; + long do_fat_read (const char *filename, void *buffer, unsigned long maxsize, int dols) { - char fnamecopy[2048]; - boot_sector bs; - volume_info volinfo; - fsdata datablock; - fsdata *mydata = &datablock; - dir_entry *dentptr; - __u16 prevcksum = 0xffff; - char *subname = ""; - int rootdir_size, cursect; - int idx, isdir = 0; - int files = 0, dirs = 0; - long ret = 0; - int firsttime; - - if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) { - FAT_DPRINT ("Error: reading boot sector\n"); - return -1; - } - if (mydata->fatsize == 32) { - mydata->fatlength = bs.fat32_length; - } else { - mydata->fatlength = bs.fat_length; - } - mydata->fat_sect = bs.reserved; - cursect = mydata->rootdir_sect - = mydata->fat_sect + mydata->fatlength * bs.fats; - mydata->clust_size = bs.cluster_size; - if (mydata->fatsize == 32) { - rootdir_size = mydata->clust_size; - mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */ - - (mydata->clust_size * 2); - } else { - rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0]) - * sizeof (dir_entry)) / SECTOR_SIZE; - mydata->data_begin = mydata->rootdir_sect + rootdir_size - - (mydata->clust_size * 2); - } - mydata->fatbufnum = -1; - - FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize, - mydata->fatlength); - FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n" - "Data begins at: %d\n", - mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE, - rootdir_size, mydata->data_begin); - FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size); - - /* "cwd" is always the root... */ - while (ISDIRDELIM (*filename)) - filename++; - /* Make a copy of the filename and convert it to lowercase */ - strcpy (fnamecopy, filename); - downcase (fnamecopy); - if (*fnamecopy == '\0') { - if (!dols) - return -1; - dols = LS_ROOT; - } else if ((idx = dirdelim (fnamecopy)) >= 0) { - isdir = 1; - fnamecopy[idx] = '\0'; - subname = fnamecopy + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*subname)) - subname++; - } else if (dols) { - isdir = 1; - } - - while (1) { - int i; + char fnamecopy[2048]; + boot_sector bs; + volume_info volinfo; + fsdata datablock; + fsdata *mydata = &datablock; + dir_entry *dentptr; + __u16 prevcksum = 0xffff; + char *subname = ""; + int cursect; + int idx, isdir = 0; + int files = 0, dirs = 0; + long ret = 0; + int firsttime; + int root_cluster; + int j; - if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) { - FAT_DPRINT ("Error: reading rootdir block\n"); - return -1; + if (read_bootsectandvi(&bs, &volinfo, &mydata->fatsize)) { + debug("Error: reading boot sector\n"); + return -1; } - dentptr = (dir_entry *) do_fat_read_block; - for (i = 0; i < DIRENTSPERBLOCK; i++) { - char s_name[14], l_name[256]; - l_name[0] = '\0'; - if ((dentptr->attr & ATTR_VOLUME)) { + root_cluster = bs.root_cluster; + + if (mydata->fatsize == 32) + mydata->fatlength = bs.fat32_length; + else + mydata->fatlength = bs.fat_length; + + mydata->fat_sect = bs.reserved; + + cursect = mydata->rootdir_sect + = mydata->fat_sect + mydata->fatlength * bs.fats; + + mydata->clust_size = bs.cluster_size; + + if (mydata->fatsize == 32) { + mydata->data_begin = mydata->rootdir_sect - + (mydata->clust_size * 2); + } else { + int rootdir_size; + + rootdir_size = ((bs.dir_entries[1] * (int)256 + + bs.dir_entries[0]) * + sizeof(dir_entry)) / + SECTOR_SIZE; + mydata->data_begin = mydata->rootdir_sect + + rootdir_size - + (mydata->clust_size * 2); + } + + mydata->fatbufnum = -1; + #ifdef CONFIG_SUPPORT_VFAT - if ((dentptr->attr & ATTR_VFAT) && - (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { - prevcksum = ((dir_slot *) dentptr)->alias_checksum; - get_vfatname (mydata, 0, do_fat_read_block, dentptr, l_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirs++; - dirc = '/'; - doit = 1; - } else { - dirc = ' '; - if (l_name[0] != 0) { - files++; - doit = 1; - } - } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), - l_name, dirc); - } else { - printf (" %s%c\n", l_name, dirc); - } - } - dentptr++; - continue; - } - FAT_DPRINT ("Rootvfatname: |%s|\n", l_name); - } else + debug("VFAT Support enabled\n"); #endif - { - /* Volume label or VFAT entry */ - dentptr++; - continue; - } - } else if (dentptr->name[0] == 0) { - FAT_DPRINT ("RootDentname == NULL - %d\n", i); - if (dols == LS_ROOT) { - printf ("\n%d file(s), %d dir(s)\n\n", files, dirs); - return 0; + debug("FAT%d, fat_sect: %d, fatlength: %d\n", + mydata->fatsize, mydata->fat_sect, mydata->fatlength); + debug("Rootdir begins at cluster: %d, sector: %d, offset: %x\n" + "Data begins at: %d\n", + root_cluster, + mydata->rootdir_sect, + mydata->rootdir_sect * SECTOR_SIZE, mydata->data_begin); + debug("Cluster size: %d\n", mydata->clust_size); + + /* "cwd" is always the root... */ + while (ISDIRDELIM(*filename)) + filename++; + + /* Make a copy of the filename and convert it to lowercase */ + strcpy(fnamecopy, filename); + downcase(fnamecopy); + + if (*fnamecopy == '\0') { + if (!dols) + return -1; + + dols = LS_ROOT; + } else if ((idx = dirdelim(fnamecopy)) >= 0) { + isdir = 1; + fnamecopy[idx] = '\0'; + subname = fnamecopy + idx + 1; + + /* Handle multiple delimiters */ + while (ISDIRDELIM(*subname)) + subname++; + } else if (dols) { + isdir = 1; + } + + j = 0; + while (1) { + int i; + + debug("FAT read sect=%d, clust_size=%d, DIRENTSPERBLOCK=%d\n", + cursect, mydata->clust_size, DIRENTSPERBLOCK); + + if (disk_read(cursect, mydata->clust_size, do_fat_read_block) < 0) { + debug("Error: reading rootdir block\n"); + return -1; } - return -1; - } + + dentptr = (dir_entry *) do_fat_read_block; + + for (i = 0; i < DIRENTSPERBLOCK; i++) { + char s_name[14], l_name[256]; + + l_name[0] = '\0'; + if ((dentptr->attr & ATTR_VOLUME)) { +#ifdef CONFIG_SUPPORT_VFAT + if ((dentptr->attr & ATTR_VFAT) && + (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { + prevcksum = + ((dir_slot *)dentptr)->alias_checksum; + + get_vfatname(mydata, 0, + do_fat_read_block, + dentptr, l_name); + + if (dols == LS_ROOT) { + char dirc; + int doit = 0; + int isdir = + (dentptr->attr & ATTR_DIR); + + if (isdir) { + dirs++; + dirc = '/'; + doit = 1; + } else { + dirc = ' '; + if (l_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + l_name, + dirc); + } else { + printf(" %s%c\n", + l_name, + dirc); + } + } + dentptr++; + continue; + } + debug("Rootvfatname: |%s|\n", + l_name); + } else +#endif + { + /* Volume label or VFAT entry */ + dentptr++; + continue; + } + } else if (dentptr->name[0] == 0) { + debug("RootDentname == NULL - %d\n", i); + if (dols == LS_ROOT) { + printf("\n%d file(s), %d dir(s)\n\n", + files, dirs); + return 0; + } + return -1; + } #ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT - && mkcksum (dentptr->name) == prevcksum) { - dentptr++; - continue; - } + else if (dols == LS_ROOT && + mkcksum(dentptr->name) == prevcksum) { + dentptr++; + continue; + } #endif - get_name (dentptr, s_name); - if (dols == LS_ROOT) { - int isdir = (dentptr->attr & ATTR_DIR); - char dirc; - int doit = 0; - - if (isdir) { - dirc = '/'; - if (s_name[0] != 0) { - dirs++; - doit = 1; - } + get_name(dentptr, s_name); + + if (dols == LS_ROOT) { + int isdir = (dentptr->attr & ATTR_DIR); + char dirc; + int doit = 0; + + if (isdir) { + dirc = '/'; + if (s_name[0] != 0) { + dirs++; + doit = 1; + } + } else { + dirc = ' '; + if (s_name[0] != 0) { + files++; + doit = 1; + } + } + if (doit) { + if (dirc == ' ') { + printf(" %8ld %s%c\n", + (long)FAT2CPU32(dentptr->size), + s_name, dirc); + } else { + printf(" %s%c\n", + s_name, dirc); + } + } + dentptr++; + continue; + } + + if (strcmp(fnamecopy, s_name) + && strcmp(fnamecopy, l_name)) { + debug("RootMismatch: |%s|%s|\n", s_name, + l_name); + dentptr++; + continue; + } + + if (isdir && !(dentptr->attr & ATTR_DIR)) + return -1; + + debug("RootName: %s", s_name); + debug(", start: 0x%x", START(dentptr)); + debug(", size: 0x%x %s\n", + FAT2CPU32(dentptr->size), + isdir ? "(DIR)" : ""); + + goto rootdir_done; /* We got a match */ + } + debug("END LOOP: j=%d clust_size=%d\n", j, + mydata->clust_size); + + /* + * On FAT32 we must fetch the FAT entries for the next + * root directory clusters when a cluster has been + * completely processed. + */ + if ((mydata->fatsize == 32) && (++j == mydata->clust_size)) { + int nxtsect; + int nxt_clust; + + nxt_clust = get_fatent(mydata, root_cluster); + + nxtsect = mydata->data_begin + + (nxt_clust * mydata->clust_size); + + debug("END LOOP: sect=%d, root_clust=%d, " + "n_sect=%d, n_clust=%d\n", + cursect, root_cluster, + nxtsect, nxt_clust); + + root_cluster = nxt_clust; + + cursect = nxtsect; + j = 0; } else { - dirc = ' '; - if (s_name[0] != 0) { - files++; - doit = 1; - } + cursect++; } - if (doit) { - if (dirc == ' ') { - printf (" %8ld %s%c\n", - (long) FAT2CPU32 (dentptr->size), s_name, - dirc); - } else { - printf (" %s%c\n", s_name, dirc); - } + } +rootdir_done: + + firsttime = 1; + + while (isdir) { + int startsect = mydata->data_begin + + START(dentptr) * mydata->clust_size; + dir_entry dent; + char *nextname = NULL; + + dent = *dentptr; + dentptr = &dent; + + idx = dirdelim(subname); + + if (idx >= 0) { + subname[idx] = '\0'; + nextname = subname + idx + 1; + /* Handle multiple delimiters */ + while (ISDIRDELIM(*nextname)) + nextname++; + if (dols && *nextname == '\0') + firsttime = 0; + } else { + if (dols && firsttime) { + firsttime = 0; + } else { + isdir = 0; + } } - dentptr++; - continue; - } - if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) { - FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name); - dentptr++; - continue; - } - if (isdir && !(dentptr->attr & ATTR_DIR)) - return -1; - FAT_DPRINT ("RootName: %s", s_name); - FAT_DPRINT (", start: 0x%x", START (dentptr)); - FAT_DPRINT (", size: 0x%x %s\n", - FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : ""); - - goto rootdir_done; /* We got a match */ - } - cursect++; - } - rootdir_done: - - firsttime = 1; - while (isdir) { - int startsect = mydata->data_begin - + START (dentptr) * mydata->clust_size; - dir_entry dent; - char *nextname = NULL; - - dent = *dentptr; - dentptr = &dent; - - idx = dirdelim (subname); - if (idx >= 0) { - subname[idx] = '\0'; - nextname = subname + idx + 1; - /* Handle multiple delimiters */ - while (ISDIRDELIM (*nextname)) - nextname++; - if (dols && *nextname == '\0') - firsttime = 0; - } else { - if (dols && firsttime) { - firsttime = 0; - } else { - isdir = 0; - } - } + if (get_dentfromdir(mydata, startsect, subname, dentptr, + isdir ? 0 : dols) == NULL) { + if (dols && !isdir) + return 0; + return -1; + } - if (get_dentfromdir (mydata, startsect, subname, dentptr, - isdir ? 0 : dols) == NULL) { - if (dols && !isdir) - return 0; - return -1; + if (idx >= 0) { + if (!(dentptr->attr & ATTR_DIR)) + return -1; + subname = nextname; + } } - if (idx >= 0) { - if (!(dentptr->attr & ATTR_DIR)) - return -1; - subname = nextname; - } - } - ret = get_contents (mydata, dentptr, buffer, maxsize); - FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret); + ret = get_contents(mydata, dentptr, buffer, maxsize); + debug("Size: %d, got: %ld\n", FAT2CPU32(dentptr->size), ret); - return ret; + return ret; } - -int -file_fat_detectfs(void) +int file_fat_detectfs (void) { - boot_sector bs; - volume_info volinfo; - int fatsize; - char vol_label[12]; + boot_sector bs; + volume_info volinfo; + int fatsize; + char vol_label[12]; - if(cur_dev==NULL) { + if (cur_dev == NULL) { printf("No current device\n"); return 1; } + #if defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_MG_DISK) || \ defined(CONFIG_CMD_SATA) || \ @@ -961,42 +1073,58 @@ file_fat_detectfs(void) defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) printf("Interface: "); - switch(cur_dev->if_type) { - case IF_TYPE_IDE : printf("IDE"); break; - case IF_TYPE_SATA : printf("SATA"); break; - case IF_TYPE_SCSI : printf("SCSI"); break; - case IF_TYPE_ATAPI : printf("ATAPI"); break; - case IF_TYPE_USB : printf("USB"); break; - case IF_TYPE_DOC : printf("DOC"); break; - case IF_TYPE_MMC : printf("MMC"); break; - default : printf("Unknown"); - } - printf("\n Device %d: ",cur_dev->dev); + switch (cur_dev->if_type) { + case IF_TYPE_IDE: + printf("IDE"); + break; + case IF_TYPE_SATA: + printf("SATA"); + break; + case IF_TYPE_SCSI: + printf("SCSI"); + break; + case IF_TYPE_ATAPI: + printf("ATAPI"); + break; + case IF_TYPE_USB: + printf("USB"); + break; + case IF_TYPE_DOC: + printf("DOC"); + break; + case IF_TYPE_MMC: + printf("MMC"); + break; + default: + printf("Unknown"); + } + + printf("\n Device %d: ", cur_dev->dev); dev_print(cur_dev); #endif - if(read_bootsectandvi(&bs, &volinfo, &fatsize)) { + + if (read_bootsectandvi(&bs, &volinfo, &fatsize)) { printf("\nNo valid FAT fs found\n"); return 1; } - memcpy (vol_label, volinfo.volume_label, 11); + + memcpy(vol_label, volinfo.volume_label, 11); vol_label[11] = '\0'; - volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n" - ,cur_part,volinfo.fs_type,vol_label); + volinfo.fs_type[5] = '\0'; + + printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part, + volinfo.fs_type, vol_label); + return 0; } - -int -file_fat_ls(const char *dir) +int file_fat_ls (const char *dir) { return do_fat_read(dir, NULL, 0, LS_YES); } - -long -file_fat_read(const char *filename, void *buffer, unsigned long maxsize) +long file_fat_read (const char *filename, void *buffer, unsigned long maxsize) { - printf("reading %s\n",filename); + printf("reading %s\n", filename); return do_fat_read(filename, buffer, maxsize, LS_NO); } diff --git a/fs/fat/file.c b/fs/fat/file.c index e870734402..59c5d37cdc 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -48,12 +48,12 @@ char file_cwd[CWD_LEN+1] = "/"; const char * file_getfsname(int idx) { - if (idx < 0 || idx >= NUM_FILESYS) return NULL; + if (idx < 0 || idx >= NUM_FILESYS) + return NULL; return filesystems[idx].name; } - static void pathcpy(char *dest, const char *src) { @@ -72,15 +72,14 @@ pathcpy(char *dest, const char *src) return; } ++dest; - if (ISDIRDELIM(*src)) { + + if (ISDIRDELIM(*src)) while (ISDIRDELIM(*src)) src++; - } else { + else src++; - } } while (1); } - int file_cd(const char *path) { @@ -141,7 +140,6 @@ file_cd(const char *path) return 0; } - int file_detectfs(void) { @@ -160,7 +158,6 @@ file_detectfs(void) return current_filesystem; } - int file_ls(const char *dir) { @@ -181,7 +178,6 @@ file_ls(const char *dir) return filesystems[current_filesystem].ls(arg); } - long file_read(const char *filename, void *buffer, unsigned long maxsize) { diff --git a/include/commproc.h b/include/commproc.h index 9d28abce86..762238ebec 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -828,38 +828,6 @@ typedef struct scc_enet { #endif /* CONFIG_GENIETV */ -/*** GTH ******************************************************/ - -#ifdef CONFIG_GTH -#ifdef CONFIG_FEC_ENET -#define FEC_ENET /* use FEC for EThernet */ -#endif /* CONFIG_FEC_ETHERNET */ - -/* This ENET stuff is for GTH 10 Mbit ( SCC ) */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 - -#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */ -#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */ -#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */ -#define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */ - -#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */ - -#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */ -#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */ - -/* NOTE. This is reset for 10Mbit port only */ -#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */ - -#define SICR_ENET_MASK ((uint)0x000000ff) - -/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */ -#define SICR_ENET_CLKRT ((uint)0x00000037) - -#endif /* CONFIG_GTH */ - /*** HERMES-PRO ******************************************************/ /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 49a86fd4cc..c133033bcc 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -91,9 +91,6 @@ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ #define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) /* DDR Setup */ #define CONFIG_FSL_DDR2 diff --git a/include/configs/GTH.h b/include/configs/GTH.h deleted file mode 100644 index c2cf852d15..0000000000 --- a/include/configs/GTH.h +++ /dev/null @@ -1,389 +0,0 @@ -/* - * Parameters for GTH board - * Based on FADS860T - * by thomas.lange@corelatus.com - - * A collection of structures, addresses, and values associated with - * the Motorola 860T FADS board. Copied from the MBX stuff. - * Magnus Damm added defines for 8xxrom and extended bd_info. - * Helmut Buchsbaum added bitvalues for BCSRx - * - * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) - */ - -/* - * ff000000 -> ff00ffff : IMAP internal in the cpu - * e0000000 -> ennnnnnn : pcmcia - * 98000000 -> 983nnnnn : FPGA 4MB - * 90000000 -> 903nnnnn : FPGA 4MB - * 80000000 -> 80nnnnnn : flash connected to CS0, final ( real ) location - * 00000000 -> nnnnnnnn : sdram - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#include <mpc8xx_irq.h> - -#define CONFIG_MPC860 1 -#define CONFIG_MPC860T 1 -#define CONFIG_GTH 1 - -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#define MPC8XX_FACT 3 /* Multiply by 3 */ -#define MPC8XX_XIN 16384000 /* 16.384 MHz */ -#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) - -#define CONFIG_BOOTDELAY 1 /* autoboot after 0 seconds */ - -#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ - -#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ - -#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ - -/* Only interrupt boot if space is pressed */ -/* If a long serial cable is connected but */ -/* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press space to abort autoboot in %d second\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_AUTOBOOT_STOP_STR " " - -#if 0 -/* Net boot */ -/* Loads a tftp image and starts it */ -#define CONFIG_BOOTCOMMAND "bootp;bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "panic=1" -#else -/* Compact flash boot */ -#define CONFIG_BOOTARGS "panic=1 root=/dev/hda7" -#define CONFIG_BOOTCOMMAND "disk 100000 0:5;bootm 100000" -#endif - -/* Enable watchdog */ -#define CONFIG_WATCHDOG 1 - -/* choose SCC1 ethernet (10BASET on motherboard) - * or FEC ethernet (10/100 on daughterboard) - */ -#if 1 -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ -#undef CONFIG_FEC_ENET /* disable FEC ethernet */ -#define CONFIG_SYS_DISCOVER_PHY -#else -#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ -#define CONFIG_FEC_ENET 1 /* use FEC ethernet */ -#define CONFIG_SYS_DISCOVER_PHY -#endif -#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) -#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IDE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ - -/* Default location to load data from net */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400 } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 -#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE 0x80000000 - -#define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE - -#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#undef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 0x000E0000 -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_SECT_SIZE 0x50000 /* see README - env sector total size */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*---------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ - -/*FIXME dont use for now */ -/*#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -/*#define CONFIG_SYS_RTCSC (RTCSC_RTF) */ - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -/* PITE */ -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ - -/* FIXME check values */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_RTSEL|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) - - /*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* Because of the way the 860 starts up and assigns CS0 the -* entire address space, we have to set the memory controller -* differently. Normally, you write the option register -* first, and then enable the chip select by writing the -* base register. For CS0, you must write the base register -* first, followed by the option register. -*/ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ -/* the other CS:s are determined by looking at parameters in BCSRx */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - -#define CONFIG_SYS_REMAP_OR_AM 0xFF800000 /* 4 MB OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ - -#define FPGA_2_BASE 0x90000000 -#define FPGA_3_BASE 0x98000000 - -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 1 Mbyte until detected and only 1 Mbyte is needed*/ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16 ) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#define CONFIG_ETHADDR DE:AD:BE:EF:00:01 /* Ethernet address */ - -#ifdef CONFIG_MPC860T - -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -#endif /* CONFIG_MPC860T */ - -/* We don't use the 8259. -*/ -#define NR_8259_INTS 0 - -/* Machine type -*/ -#define _MACH_8xx (_MACH_gth) - -#ifdef CONFIG_MPC860 -#define PCMCIA_SLOT_A 1 -#define CONFIG_PCMCIA_SLOT_A 1 -#endif - -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ /* Force it - dont measure it */ - -#define PA_FRONT_LED ((u16)0x4) /* PA 13 */ -#define PA_FL_CONFIG ((u16)0x20) /* PA 10 */ -#define PA_FL_CE ((u16)0x1000) /* PA 3 */ - -#define PB_ID_GND ((u32)1) /* PB 31 */ -#define PB_REV_1 ((u32)2) /* PB 30 */ -#define PB_REV_0 ((u32)4) /* PB 29 */ -#define PB_BLUE_LED ((u32)0x400) /* PB 21 */ -#define PB_EEPROM ((u32)0x800) /* PB 20 */ -#define PB_ID_3 ((u32)0x2000) /* PB 18 */ -#define PB_ID_2 ((u32)0x4000) /* PB 17 */ -#define PB_ID_1 ((u32)0x8000) /* PB 16 */ -#define PB_ID_0 ((u32)0x10000) /* PB 15 */ - -/* NOTE. This is reset for 100Mbit port only */ -#define PC_ENET100_RESET ((ushort)0x0080) /* PC 8 */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index a014ad0941..890a6c9bc4 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -65,6 +65,7 @@ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ @@ -125,11 +126,6 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index faba353119..96fd0241ca 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -79,11 +79,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index fdd3597f79..23594a74cb 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -80,10 +80,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 0cc2d47428..bc6c5c7b46 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -75,9 +75,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index bb7bb47d65..92c2b49c1f 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -103,9 +103,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 57c2f2f236..51e5d06db9 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -89,10 +89,6 @@ #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 8382e3ca83..4d9606e498 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -82,10 +82,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR+0x2c000) /* DDR Setup */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 94e4d243e8..0d1f7799cf 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -1,5 +1,5 @@ /* - * Copyright 2006 Freescale Semiconductor. + * Copyright 2006, 2010 Freescale Semiconductor. * * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -58,8 +58,8 @@ #ifndef CONFIG_RIO /* RIO/PCI are mutually exclusive */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ -#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #endif @@ -122,9 +122,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW #endif -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - /* * DDR Setup */ @@ -328,43 +325,43 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x0000000c00000000ULL #else -#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_VIRT -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_VIRT #endif -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCI1_IO_PHYS (CONFIG_SYS_PCI1_IO_VIRT \ +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_PHYS (CONFIG_SYS_PCIE1_IO_VIRT \ | CONFIG_SYS_PHYS_ADDR_HIGH) -#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */ +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */ #ifdef CONFIG_PHYS_64BIT /* - * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT. + * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT. * This will increase the amount of PCI address space available for * for mapping RAM. */ -#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS #else -#define CONFIG_SYS_PCI2_MEM_BUS (CONFIG_SYS_PCI1_MEM_BUS \ - + CONFIG_SYS_PCI1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \ + + CONFIG_SYS_PCIE1_MEM_SIZE) #endif -#define CONFIG_SYS_PCI2_MEM_VIRT (CONFIG_SYS_PCI1_MEM_VIRT \ - + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI2_MEM_PHYS (CONFIG_SYS_PCI1_MEM_PHYS \ - + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \ - + CONFIG_SYS_PCI1_IO_SIZE) -#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS \ - + CONFIG_SYS_PCI1_IO_SIZE) -#define CONFIG_SYS_PCI2_IO_SIZE CONFIG_SYS_PCI1_IO_SIZE +#define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \ + + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \ + + CONFIG_SYS_PCIE1_MEM_SIZE) +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \ + + CONFIG_SYS_PCIE1_IO_SIZE) +#define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \ + + CONFIG_SYS_PCIE1_IO_SIZE) +#define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE #if defined(CONFIG_PCI) @@ -393,10 +390,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 /*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_VIRT +#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT /*PCI video card used*/ -/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ +/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/ /* video */ #define CONFIG_VIDEO @@ -409,7 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ATI_RADEON_FB #define CONFIG_VIDEO_LOGO /*#define CONFIG_CONSOLE_CURSOR*/ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT #endif #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -425,8 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE #endif -#define CONFIG_MPC86XX_PCI2 - #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -497,17 +492,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* if CONFIG_PCI: - * BAT2 PCI1 and PCI1 MEM + * BAT2 PCIE1 and PCIE1 MEM * if CONFIG_RIO * BAT2 Rapidio Memory */ #ifdef CONFIG_PCI -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \ +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \ +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #else /* CONFIG_RIO */ @@ -556,14 +551,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* - * BAT4 PCI1_IO and PCI2_IO + * BAT4 PCIE1_IO and PCIE2_IO */ -#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ +#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \ +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \ +#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index b42b5d09f1..f9d12f55f9 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -30,6 +30,7 @@ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS @@ -60,10 +61,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */ -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */ - /* DDR Setup */ #define CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 3cebbab53c..fca3cddf11 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -129,9 +129,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 569da4f645..bf2acbf4c4 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -90,10 +90,6 @@ #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR3 1 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 90abe14f24..d8f2602e59 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -137,10 +137,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) - /* * DDR Setup */ diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index c63fd429f1..8770a8dab9 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -97,8 +97,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* * Diagnostics diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index df5ef78489..83aeffd29f 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) /* * Diagnostics diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 1d6091caf6..fc4a986039 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -99,8 +99,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) -#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* * Diagnostics diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index ac9b3c5053..6fe7639e86 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -77,6 +77,13 @@ #define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000 #define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000 +/* + * BCSR bits as defined in the Canyonlands board user manual. + */ +#define BCSR_USBCTRL_OTG_RST 0x32 +#define BCSR_USBCTRL_HOST_RST 0x01 +#define BCSR_SELECT_PCIE 0x10 + #define CONFIG_SYS_PCIE0_UTLBASE 0xc08010000ULL /* 36bit physical addr */ /* base address of inbound PCIe window */ @@ -417,6 +424,7 @@ #define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE | 0xd0000) #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#define CONFIG_SYS_USB_OHCI_BOARD_INIT #endif /* diff --git a/include/configs/katmai.h b/include/configs/katmai.h index fb8ccae71b..76e9a76264 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -202,6 +202,7 @@ */ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE +#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_PCI diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 3f4056e82b..c8b8d0d80d 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -109,10 +109,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) -#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 315eebe7f6..618513ab66 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -56,8 +56,8 @@ #define CONFIG_SYS_SCRATCH_VA 0xe8000000 #define CONFIG_PCI 1 /* Enable PCIE */ -#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -108,9 +108,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) -#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) - /* * DDR Setup */ @@ -307,23 +304,23 @@ * General PCI * Addresses are mapped 1-1. */ -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS -#define CONFIG_SYS_PCI2_MEM_VIRT CONFIG_SYS_PCI2_MEM_BUS -#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_IO_BUS 0xe3000000 -#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS -#define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS -#define CONFIG_SYS_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 +#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS +#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS +#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ + +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 +#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS +#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS +#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */ #if defined(CONFIG_PCI) @@ -409,10 +406,10 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ +#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U /* @@ -452,10 +449,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ +#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U /* diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 0ecc5b10de..b38886b53f 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -74,8 +74,8 @@ #define CONFIG_SYS_FLASH_SIZE (64 << 20) #define CONFIG_SYS_FPGA1_BASE 0xe0000000 -#define CONFIG_SYS_FPGA2_BASE 0xe0100000 -#define CONFIG_SYS_FPGA3_BASE 0xe0200000 +#define CONFIG_SYS_FPGA2_BASE 0xe2000000 +#define CONFIG_SYS_FPGA3_BASE 0xe4000000 #define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */ #define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4 @@ -84,14 +84,12 @@ (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \ | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */ +#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */ #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 #define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */ -#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */ - /* * Initial RAM & stack pointer (placed in OCM) */ @@ -121,6 +119,7 @@ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ @@ -144,10 +143,13 @@ /* * DDR2 SDRAM */ +#define CONFIG_SYS_MBYTES_SDRAM 256 +#define CONFIG_DDR_ECC #define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */ /* DDR1/2 SDRAM Device Control Register Data Values */ /* Memory Queue */ @@ -162,9 +164,6 @@ #define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80 #define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000 -#define CONFIG_DDR_ECC -#define CONFIG_SYS_MBYTES_SDRAM 256 - #define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK /* DDR1/2 SDRAM Device Control Register Data Values */ @@ -360,6 +359,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CHIP_CONFIG +#define CONFIG_CMD_ECCTEST #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM @@ -417,7 +417,7 @@ #define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -426,7 +426,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_32MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -434,7 +434,7 @@ #define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -443,7 +443,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) @@ -451,7 +451,7 @@ #define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(5) | \ EBC_BXAP_CSN_ENCODE(0) | \ - EBC_BXAP_OEN_ENCODE(4) | \ + EBC_BXAP_OEN_ENCODE(3) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ @@ -460,7 +460,7 @@ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) #define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \ - EBC_BXCR_BS_1MB | \ + EBC_BXCR_BS_16MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_32BIT) diff --git a/include/fat.h b/include/fat.h index c8b9493620..de48afd730 100644 --- a/include/fat.h +++ b/include/fat.h @@ -33,7 +33,7 @@ #define SECTOR_SIZE FS_BLOCK_SIZE -#define FS_BLOCK_SIZE 512 +#define FS_BLOCK_SIZE 512 #if FS_BLOCK_SIZE != SECTOR_SIZE #error FS_BLOCK_SIZE != SECTOR_SIZE - This code needs to be fixed! @@ -57,37 +57,31 @@ #define SIGNLEN 8 /* File attributes */ -#define ATTR_RO 1 -#define ATTR_HIDDEN 2 -#define ATTR_SYS 4 -#define ATTR_VOLUME 8 -#define ATTR_DIR 16 -#define ATTR_ARCH 32 +#define ATTR_RO 1 +#define ATTR_HIDDEN 2 +#define ATTR_SYS 4 +#define ATTR_VOLUME 8 +#define ATTR_DIR 16 +#define ATTR_ARCH 32 -#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) +#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) #define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */ #define aRING 0x05 /* Used as special character in name[0] */ -/* Indicates that the entry is the last long entry in a set of long +/* + * Indicates that the entry is the last long entry in a set of long * dir entries */ #define LAST_LONG_ENTRY_MASK 0x40 /* Flags telling whether we should read a file or list a directory */ -#define LS_NO 0 -#define LS_YES 1 -#define LS_DIR 1 -#define LS_ROOT 2 +#define LS_NO 0 +#define LS_YES 1 +#define LS_DIR 1 +#define LS_ROOT 2 -#ifdef DEBUG -#define FAT_DPRINT(args...) printf(args) -#else -#define FAT_DPRINT(args...) -#endif -#define FAT_ERROR(arg) printf(arg) - -#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\') +#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\') #define FSTYPE_NONE (-1) @@ -166,17 +160,18 @@ typedef struct dir_entry { } dir_entry; typedef struct dir_slot { - __u8 id; /* Sequence number for slot */ - __u8 name0_4[10]; /* First 5 characters in name */ - __u8 attr; /* Attribute byte */ - __u8 reserved; /* Unused */ - __u8 alias_checksum;/* Checksum for 8.3 alias */ - __u8 name5_10[12]; /* 6 more characters in name */ - __u16 start; /* Unused */ - __u8 name11_12[4]; /* Last 2 characters in name */ + __u8 id; /* Sequence number for slot */ + __u8 name0_4[10]; /* First 5 characters in name */ + __u8 attr; /* Attribute byte */ + __u8 reserved; /* Unused */ + __u8 alias_checksum;/* Checksum for 8.3 alias */ + __u8 name5_10[12]; /* 6 more characters in name */ + __u16 start; /* Unused */ + __u8 name11_12[4]; /* Last 2 characters in name */ } dir_slot; -/* Private filesystem parameters +/* + * Private filesystem parameters * * Note: FAT buffer has to be 32 bit aligned * (see FAT32 accesses) @@ -198,10 +193,10 @@ typedef long (file_read_func)(const char *filename, void *buffer, unsigned long maxsize); struct filesystem { - file_detectfs_func *detect; - file_ls_func *ls; - file_read_func *read; - const char name[12]; + file_detectfs_func *detect; + file_ls_func *ls; + file_read_func *read; + const char name[12]; }; /* FAT tables */ diff --git a/include/fdt_support.h b/include/fdt_support.h index fc16159eb2..54af9fe712 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -83,6 +83,9 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size); void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); void fdt_del_node_and_alias(void *blob, const char *alias); +u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr); +int fdt_node_offset_by_compat_reg(void *blob, const char *compat, + phys_addr_t compat_off); #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ diff --git a/include/video_fb.h b/include/video_fb.h index 9825f0c4c2..f649c54aba 100644 --- a/include/video_fb.h +++ b/include/video_fb.h @@ -1,4 +1,4 @@ - /* +/* * (C) Copyright 1997-2002 ELTEC Elektronik AG * Frank Gottschling <fgottschling@eltec.de> * diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index 5ce45baeb4..957a7c4f68 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -121,10 +121,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) int n, sect_first, sect_last; int rcode = 0; - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 2) + return cmd_usage(cmdtp); if (strcmp(argv[1], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -146,10 +144,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) return rcode; } - if (argc != 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "bank") == 0) { bank = simple_strtoul(argv[2], NULL, 16); @@ -167,10 +163,8 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) addr_first = simple_strtoul(argv[1], NULL, 16); addr_last = simple_strtoul(argv[2], NULL, 16); - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } + if (addr_first >= addr_last) + return cmd_usage(cmdtp); printf ("Erase Flash from 0x%08lx to 0x%08lx ", addr_first, addr_last); rcode = flash_sect_erase(addr_first, addr_last); @@ -243,19 +237,15 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) int i, p, n, sect_first, sect_last; int rcode = 0; - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } + if (argc < 3) + return cmd_usage(cmdtp); if (strcmp(argv[1], "off") == 0) p = 0; else if (strcmp(argv[1], "on") == 0) p = 1; - else { - cmd_usage(cmdtp); - return 1; - } + else + return cmd_usage(cmdtp); if (strcmp(argv[2], "all") == 0) { for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { @@ -309,10 +299,8 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) return rcode; } - if (argc != 4) { - cmd_usage(cmdtp); - return 1; - } + if (argc != 4) + return cmd_usage(cmdtp); if (strcmp(argv[2], "bank") == 0) { bank = simple_strtoul(argv[3], NULL, 16); @@ -340,7 +328,8 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) } #if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); + if (!rcode) + puts(" done\n"); #endif /* CONFIG_SYS_FLASH_PROTECTION */ return rcode; @@ -349,12 +338,10 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) addr_first = simple_strtoul(argv[2], NULL, 16); addr_last = simple_strtoul(argv[3], NULL, 16); - if (addr_first >= addr_last) { - cmd_usage(cmdtp); - return 1; - } - rcode = flash_sect_protect (p, addr_first, addr_last); - return rcode; + if (addr_first >= addr_last) + return cmd_usage(cmdtp); + + return flash_sect_protect (p, addr_first, addr_last); } int flash_sect_protect (int p, ulong addr_first, ulong addr_last) { |