Merge git://git.denx.de/u-boot-nand-flash

23 files changed, 2448 insertions, 672 deletions

diff --git a/arch/arm/include/asm/imx-common/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h
index a33d3419b9..5c477835fc 100644
--- a/arch/arm/include/asm/imx-common/regs-bch.h
+++ b/arch/arm/include/asm/imx-common/regs-bch.h
@@ -148,6 +148,7 @@ struct mxs_bch_regs {
 #define	BCH_FLASHLAYOUT0_ECC0_ECC30			(0xf << 12)
 #define	BCH_FLASHLAYOUT0_ECC0_ECC32			(0x10 << 12)
 #define	BCH_FLASHLAYOUT0_GF13_0_GF14_1			(1 << 10)
+#define	BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET		10
 #define	BCH_FLASHLAYOUT0_DATA0_SIZE_MASK		0xfff
 #define	BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET		0
 
@@ -178,6 +179,7 @@ struct mxs_bch_regs {
 #define	BCH_FLASHLAYOUT1_ECCN_ECC30			(0xf << 12)
 #define	BCH_FLASHLAYOUT1_ECCN_ECC32			(0x10 << 12)
 #define	BCH_FLASHLAYOUT1_GF13_0_GF14_1			(1 << 10)
+#define	BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET		10
 #define	BCH_FLASHLAYOUT1_DATAN_SIZE_MASK		0xfff
 #define	BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET		0
 
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
index d11377f0ed..c9859a8a5b 100644
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@@ -4,4 +4,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NAND_PXA3XX=y
 CONFIG_SPI_FLASH=y
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index cb27ff22be..2f2172b987 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1125,12 +1125,22 @@ int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 }
 EXPORT_SYMBOL_GPL(mtd_is_locked);
 
-int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs)
 {
-	if (!mtd->_block_isbad)
+	if (ofs < 0 || ofs > mtd->size)
+		return -EINVAL;
+	if (!mtd->_block_isreserved)
 		return 0;
+	return mtd->_block_isreserved(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_isreserved);
+
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
 	if (ofs < 0 || ofs > mtd->size)
 		return -EINVAL;
+	if (!mtd->_block_isbad)
+		return 0;
 	return mtd->_block_isbad(mtd, ofs);
 }
 EXPORT_SYMBOL_GPL(mtd_block_isbad);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index cfbaa3d9a0..cddfb1609c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -321,6 +321,13 @@ static void part_resume(struct mtd_info *mtd)
 }
 #endif
 
+static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	ofs += part->offset;
+	return part->master->_block_isreserved(part->master, ofs);
+}
+
 static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
@@ -459,6 +466,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 		slave->mtd._unlock = part_unlock;
 	if (master->_is_locked)
 		slave->mtd._is_locked = part_is_locked;
+	if (master->_block_isreserved)
+		slave->mtd._block_isreserved = part_block_isreserved;
 	if (master->_block_isbad)
 		slave->mtd._block_isbad = part_block_isbad;
 	if (master->_block_markbad)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 41ebfea3ce..b6dfb0e835 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -56,6 +56,13 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES
 
 endchoice
 
+config NAND_PXA3XX
+	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
+	select SYS_NAND_SELF_INIT
+	help
+	  This enables the driver for the NAND flash device found on
+	  PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+
 comment "Generic NAND options"
 
 # Enhance depends when converting drivers to Kconfig which use this config
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 46dce72bfe..64d1675d0a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -34,6 +34,7 @@ obj-y += nand_ids.o
 obj-y += nand_util.o
 obj-y += nand_ecc.o
 obj-y += nand_base.o
+obj-y += nand_timings.o
 
 endif # not spl
 
@@ -61,6 +62,7 @@ obj-$(CONFIG_NAND_MXC) += mxc_nand.o
 obj-$(CONFIG_NAND_MXS) += mxs_nand.o
 obj-$(CONFIG_NAND_NDFC) += ndfc.o
 obj-$(CONFIG_NAND_NOMADIK) += nomadik.o
+obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
 obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index b2d2682a88..79e399489e 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -170,4 +170,7 @@ struct pmecc_errloc_regs {
 
 #define PMECC_MAX_TIMEOUT_US		(100 * 1000)
 
+/* Reserved bytes in oob area */
+#define PMECC_OOB_RESERVED_BYTES		2
+
 #endif
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 9e0429aa19..192be7dfa1 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -18,8 +18,10 @@
 
 static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
 
-/* We define a macro here that combines all interrupts this driver uses into
- * a single constant value, for convenience. */
+/*
+ * We define a macro here that combines all interrupts this driver uses into
+ * a single constant value, for convenience.
+ */
 #define DENALI_IRQ_ALL	(INTR_STATUS__DMA_CMD_COMP | \
 			INTR_STATUS__ECC_TRANSACTION_DONE | \
 			INTR_STATUS__ECC_ERR | \
@@ -34,8 +36,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
 			INTR_STATUS__INT_ACT | \
 			INTR_STATUS__LOCKED_BLK)
 
-/* indicates whether or not the internal value for the flash bank is
- * valid or not */
+/*
+ * indicates whether or not the internal value for the flash bank is
+ * valid or not
+ */
 #define CHIP_SELECT_INVALID	-1
 
 #define SUPPORT_8BITECC		1
@@ -46,11 +50,14 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
  */
 #define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand)
 
-/* These constants are defined by the driver to enable common driver
- * configuration options. */
+/*
+ * These constants are defined by the driver to enable common driver
+ * configuration options.
+ */
 #define SPARE_ACCESS		0x41
 #define MAIN_ACCESS		0x42
 #define MAIN_SPARE_ACCESS	0x43
+#define PIPELINE_ACCESS		0x2000
 
 #define DENALI_UNLOCK_START	0x10
 #define DENALI_UNLOCK_END	0x11
@@ -67,8 +74,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
 #define ADDR_CYCLE	1
 #define STATUS_CYCLE	2
 
-/* this is a helper macro that allows us to
- * format the bank into the proper bits for the controller */
+/*
+ * this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller
+ */
 #define BANK(x) ((x) << 24)
 
 /* Interrupts are cleared by writing a 1 to the appropriate status bit */
@@ -140,7 +149,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
  * read/write data. The operation is performed by writing the address value
  * of the command to the device memory followed by the data. This function
  * abstracts this common operation.
-*/
+ */
 static void index_addr(struct denali_nand_info *denali,
 				uint32_t address, uint32_t data)
 {
@@ -156,8 +165,10 @@ static void index_addr_read_data(struct denali_nand_info *denali,
 	*pdata = readl(denali->flash_mem + INDEX_DATA_REG);
 }
 
-/* We need to buffer some data for some of the NAND core routines.
- * The operations manage buffering that data. */
+/*
+ * We need to buffer some data for some of the NAND core routines.
+ * The operations manage buffering that data.
+ */
 static void reset_buf(struct denali_nand_info *denali)
 {
 	denali->buf.head = 0;
@@ -173,8 +184,7 @@ static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
 static void reset_bank(struct denali_nand_info *denali)
 {
 	uint32_t irq_status;
-	uint32_t irq_mask = INTR_STATUS__RST_COMP |
-			    INTR_STATUS__TIME_OUT;
+	uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
 
 	clear_interrupts(denali);
 
@@ -188,7 +198,7 @@ static void reset_bank(struct denali_nand_info *denali)
 /* Reset the flash controller */
 static uint32_t denali_nand_reset(struct denali_nand_info *denali)
 {
-	uint32_t i;
+	int i;
 
 	for (i = 0; i < denali->max_banks; i++)
 		writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
@@ -232,7 +242,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 	uint32_t twhr[6] = {120, 80, 80, 60, 60, 60};
 	uint32_t tcs[6] = {70, 35, 25, 25, 20, 15};
 
-	uint32_t tclsrising = 1;
 	uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
 	uint32_t dv_window = 0;
 	uint32_t en_lo, en_hi;
@@ -256,9 +265,8 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 
 		data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode];
 
-		data_invalid =
-		    data_invalid_rhoh <
-		    data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
+		data_invalid = data_invalid_rhoh < data_invalid_rloh ?
+					data_invalid_rhoh : data_invalid_rloh;
 
 		dv_window = data_invalid - trea[mode];
 
@@ -268,10 +276,10 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 
 	acc_clks = DIV_ROUND_UP(trea[mode], CLK_X);
 
-	while (((acc_clks * CLK_X) - trea[mode]) < 3)
+	while (acc_clks * CLK_X - trea[mode] < 3)
 		acc_clks++;
 
-	if ((data_invalid - acc_clks * CLK_X) < 2)
+	if (data_invalid - acc_clks * CLK_X < 2)
 		debug("%s, Line %d: Warning!\n", __FILE__, __LINE__);
 
 	addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X);
@@ -279,19 +287,17 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 	re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X);
 	we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X);
 	cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X);
-	if (!tclsrising)
-		cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X);
 	if (cs_cnt == 0)
 		cs_cnt = 1;
 
 	if (tcea[mode]) {
-		while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode])
+		while (cs_cnt * CLK_X + trea[mode] < tcea[mode])
 			cs_cnt++;
 	}
 
 	/* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
-	if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) &&
-	    (readl(denali->flash_reg + DEVICE_ID) == 0x88))
+	if (readl(denali->flash_reg + MANUFACTURER_ID) == 0 &&
+	    readl(denali->flash_reg + DEVICE_ID) == 0x88)
 		acc_clks = 6;
 
 	writel(acc_clks, denali->flash_reg + ACC_CLKS);
@@ -308,6 +314,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 static uint32_t get_onfi_nand_para(struct denali_nand_info *denali)
 {
 	int i;
+
 	/*
 	 * we needn't to do a reset here because driver has already
 	 * reset all the banks before
@@ -324,8 +331,11 @@ static uint32_t get_onfi_nand_para(struct denali_nand_info *denali)
 
 	nand_onfi_timing_set(denali, i);
 
-	/* By now, all the ONFI devices we know support the page cache */
-	/* rw feature. So here we enable the pipeline_rw_ahead feature */
+	/*
+	 * By now, all the ONFI devices we know support the page cache
+	 * rw feature. So here we enable the pipeline_rw_ahead feature
+	 */
+
 	return 0;
 }
 
@@ -348,8 +358,10 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
 {
 	uint32_t tmp;
 
-	/* Workaround to fix a controller bug which reports a wrong */
-	/* spare area size for some kind of Toshiba NAND device */
+	/*
+	 * Workaround to fix a controller bug which reports a wrong
+	 * spare area size for some kind of Toshiba NAND device
+	 */
 	if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
 	    (readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
 		writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
@@ -379,7 +391,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
 		writel(0, denali->flash_reg + DEVICE_WIDTH);
 		break;
 	default:
-		debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
+		debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
 		      "Will use default parameter values instead.\n",
 		      device_id);
 	}
@@ -396,11 +408,9 @@ static void find_valid_banks(struct denali_nand_info *denali)
 
 	denali->total_used_banks = 1;
 	for (i = 0; i < denali->max_banks; i++) {
-		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
-		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
-		index_addr_read_data(denali,
-				     (uint32_t)(MODE_11 | (i << 24) | 2),
-				     &id[i]);
+		index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
+		index_addr(denali, MODE_11 | (i << 24) | 1, 0);
+		index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
 
 		if (i == 0) {
 			if (!(id[i] & 0x0ff))
@@ -453,18 +463,19 @@ static void detect_partition_feature(struct denali_nand_info *denali)
 
 static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
 {
-	uint32_t id_bytes[5], addr;
-	uint8_t i, maf_id, device_id;
-
-	/* Use read id method to get device ID and other
-	 * params. For some NAND chips, controller can't
-	 * report the correct device ID by reading from
-	 * DEVICE_ID register
-	 * */
-	addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
-	index_addr(denali, (uint32_t)addr | 0, 0x90);
-	index_addr(denali, (uint32_t)addr | 1, 0);
-	for (i = 0; i < 5; i++)
+	uint32_t id_bytes[8], addr;
+	uint8_t maf_id, device_id;
+	int i;
+
+	/*
+	 * Use read id method to get device ID and other params.
+	 * For some NAND chips, controller can't report the correct
+	 * device ID by reading from DEVICE_ID register
+	 */
+	addr = MODE_11 | BANK(denali->flash_bank);
+	index_addr(denali, addr | 0, 0x90);
+	index_addr(denali, addr | 1, 0);
+	for (i = 0; i < 8; i++)
 		index_addr_read_data(denali, addr | 2, &id_bytes[i]);
 	maf_id = id_bytes[0];
 	device_id = id_bytes[1];
@@ -485,7 +496,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
 
 	detect_partition_feature(denali);
 
-	/* If the user specified to override the default timings
+	/*
+	 * If the user specified to override the default timings
 	 * with a specific ONFI mode, we apply those changes here.
 	 */
 	if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
@@ -494,7 +506,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
 	return 0;
 }
 
-/* validation function to verify that the controlling software is making
+/*
+ * validation function to verify that the controlling software is making
  * a valid request
  */
 static inline bool is_flash_bank_valid(int flash_bank)
@@ -504,7 +517,7 @@ static inline bool is_flash_bank_valid(int flash_bank)
 
 static void denali_irq_init(struct denali_nand_info *denali)
 {
-	uint32_t int_mask = 0;
+	uint32_t int_mask;
 	int i;
 
 	/* Disable global interrupts */
@@ -519,12 +532,14 @@ static void denali_irq_init(struct denali_nand_info *denali)
 	denali_irq_enable(denali, int_mask);
 }
 
-/* This helper function setups the registers for ECC and whether or not
- * the spare area will be transferred. */
+/*
+ * This helper function setups the registers for ECC and whether or not
+ * the spare area will be transferred.
+ */
 static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 				bool transfer_spare)
 {
-	int ecc_en_flag = 0, transfer_spare_flag = 0;
+	int ecc_en_flag, transfer_spare_flag;
 
 	/* set ECC, transfer spare bits if needed */
 	ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@@ -536,19 +551,19 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 	writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
 }
 
-/* sends a pipeline command operation to the controller. See the Denali NAND
+/*
+ * sends a pipeline command operation to the controller. See the Denali NAND
  * controller's user guide for more information (section 4.2.3.6).
  */
 static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
-					bool ecc_en, bool transfer_spare,
-					int access_type, int op)
+				    bool ecc_en, bool transfer_spare,
+				    int access_type, int op)
 {
 	uint32_t addr, cmd, irq_status;
 	static uint32_t page_count = 1;
 
 	setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
 
-	/* clear interrupts */
 	clear_interrupts(denali);
 
 	addr = BANK(denali->flash_bank) | denali->page;
@@ -576,12 +591,15 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
 
 /* helper function that simply writes a buffer to the flash */
 static int write_data_to_flash_mem(struct denali_nand_info *denali,
-						const uint8_t *buf, int len)
+				   const uint8_t *buf, int len)
 {
-	uint32_t i = 0, *buf32;
+	uint32_t *buf32;
+	int i;
 
-	/* verify that the len is a multiple of 4. see comment in
-	 * read_data_from_flash_mem() */
+	/*
+	 * verify that the len is a multiple of 4.
+	 * see comment in read_data_from_flash_mem()
+	 */
 	BUG_ON((len % 4) != 0);
 
 	/* write the data to the flash memory */
@@ -593,19 +611,17 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali,
 
 /* helper function that simply reads a buffer from the flash */
 static int read_data_from_flash_mem(struct denali_nand_info *denali,
-						uint8_t *buf, int len)
+				    uint8_t *buf, int len)
 {
-	uint32_t i, *buf32;
+	uint32_t *buf32;
+	int i;
 
 	/*
-	 * we assume that len will be a multiple of 4, if not
-	 * it would be nice to know about it ASAP rather than
-	 * have random failures...
-	 * This assumption is based on the fact that this
-	 * function is designed to be used to read flash pages,
-	 * which are typically multiples of 4...
+	 * we assume that len will be a multiple of 4, if not it would be nice
+	 * to know about it ASAP rather than have random failures...
+	 * This assumption is based on the fact that this function is designed
+	 * to be used to read flash pages, which are typically multiples of 4.
 	 */
-
 	BUG_ON((len % 4) != 0);
 
 	/* transfer the data from the flash */
@@ -667,8 +683,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
-			 irq_status = 0, addr = 0x0, cmd = 0x0;
+	uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
+	uint32_t irq_status, addr, cmd;
 
 	denali->page = page;
 
@@ -676,15 +692,18 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 				     DENALI_READ) == 0) {
 		read_data_from_flash_mem(denali, buf, mtd->oobsize);
 
-		/* wait for command to be accepted
-		 * can always use status0 bit as the mask is identical for each
-		 * bank. */
+		/*
+		 * wait for command to be accepted
+		 * can always use status0 bit as the
+		 * mask is identical for each bank.
+		 */
 		irq_status = wait_for_irq(denali, irq_mask);
 
 		if (irq_status == 0)
 			printf("page on OOB timeout %d\n", denali->page);
 
-		/* We set the device back to MAIN_ACCESS here as I observed
+		/*
+		 * We set the device back to MAIN_ACCESS here as I observed
 		 * instability with the controller if you do a block erase
 		 * and the last transaction was a SPARE_ACCESS. Block erase
 		 * is reliable (according to the MTD test infrastructure)
@@ -696,12 +715,14 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 	}
 }
 
-/* this function examines buffers to see if they contain data that
+/*
+ * this function examines buffers to see if they contain data that
  * indicate that the buffer is part of an erased region of flash.
  */
 static bool is_erased(uint8_t *buf, int len)
 {
-	int i = 0;
+	int i;
+
 	for (i = 0; i < len; i++)
 		if (buf[i] != 0xFF)
 			return false;
@@ -711,12 +732,7 @@ static bool is_erased(uint8_t *buf, int len)
 /* programs the controller to either enable/disable DMA transfers */
 static void denali_enable_dma(struct denali_nand_info *denali, bool en)
 {
-	uint32_t reg_val = 0x0;
-
-	if (en)
-		reg_val = DMA_ENABLE__FLAG;
-
-	writel(reg_val, denali->flash_reg + DMA_ENABLE);
+	writel(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
 	readl(denali->flash_reg + DMA_ENABLE);
 }
 
@@ -753,12 +769,12 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 	index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
 
 	/* 2. set memory high address bits 23:8 */
-	index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200);
+	index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
 
 	/* 3. set memory low address bits 23:8 */
-	index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300);
+	index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
 
-	/* 4.  interrupt when complete, burst len = 64 bytes*/
+	/* 4. interrupt when complete, burst len = 64 bytes */
 	index_addr(denali, mode | 0x14000, 0x2400);
 #endif
 }
@@ -1018,17 +1034,18 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	int status = denali->status;
+
 	denali->status = 0;
 
 	return status;
 }
 
-static void denali_erase(struct mtd_info *mtd, int page)
+static int denali_erase(struct mtd_info *mtd, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+
 	uint32_t cmd, irq_status;
 
-	/* clear interrupts */
 	clear_interrupts(denali);
 
 	/* setup page read request for access type */
@@ -1041,9 +1058,9 @@ static void denali_erase(struct mtd_info *mtd, int page)
 
 	if (irq_status & INTR_STATUS__ERASE_FAIL ||
 	    irq_status & INTR_STATUS__LOCKED_BLK)
-		denali->status = NAND_STATUS_FAIL;
-	else
-		denali->status = 0;
+		return NAND_STATUS_FAIL;
+
+	return 0;
 }
 
 static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@@ -1062,10 +1079,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 	case NAND_CMD_READID:
 	case NAND_CMD_PARAM:
 		reset_buf(denali);
-		/* sometimes ManufactureId read from register is not right
+		/*
+		 * sometimes ManufactureId read from register is not right
 		 * e.g. some of Micron MT29F32G08QAA MLC NAND chips
 		 * So here we send READID cmd to NAND insteand
-		 * */
+		 */
 		addr = MODE_11 | BANK(denali->flash_bank);
 		index_addr(denali, addr | 0, cmd);
 		index_addr(denali, addr | 1, col & 0xFF);
@@ -1187,6 +1205,9 @@ static int denali_init(struct denali_nand_info *denali)
 	denali->nand.ecc.mode = NAND_ECC_HW;
 	denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE;
 
+	/* no subpage writes on denali */
+	denali->nand.options |= NAND_NO_SUBPAGE_WRITE;
+
 	/*
 	 * Tell driver the ecc strength. This register may be already set
 	 * correctly. So we read this value out.
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index a258df00fd..93b57259d6 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -5,6 +5,9 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#ifndef __DENALI_H__
+#define __DENALI_H__
+
 #include <linux/mtd/nand.h>
 
 #define DEVICE_RESET				0x0
@@ -381,9 +384,6 @@
 
 #define CUSTOM_CONF_PARAMS      0
 
-#ifndef _LLD_NAND_
-#define _LLD_NAND_
-
 #define INDEX_CTRL_REG    0x0
 #define INDEX_DATA_REG    0x10
 
@@ -463,4 +463,4 @@ struct denali_nand_info {
 	uint32_t max_banks;
 };
 
-#endif /*_LLD_NAND_*/
+#endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index b9121c397e..c1c1ff876a 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -717,7 +717,7 @@ static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
 	return read_page(mtd, nand, buf, page, 1);
 }
 
-static void docg4_erase_block(struct mtd_info *mtd, int page)
+static int docg4_erase_block(struct mtd_info *mtd, int page)
 {
 	struct nand_chip *nand = mtd->priv;
 	struct docg4_priv *doc = nand->priv;
@@ -760,6 +760,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page)
 	write_nop(docptr);
 	poll_status(docptr);
 	write_nop(docptr);
+
+	return nand->waitfunc(mtd, nand);
 }
 
 static int read_factory_bbt(struct mtd_info *mtd)
@@ -972,7 +974,7 @@ int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum)
 	nand->read_buf = docg4_read_buf;
 	nand->write_buf = docg4_write_buf16;
 	nand->scan_bbt = nand_default_bbt;
-	nand->erase_cmd = docg4_erase_block;
+	nand->erase = docg4_erase_block;
 	nand->ecc.read_page = docg4_read_page;
 	nand->ecc.write_page = docg4_write_page;
 	nand->ecc.read_page_raw = docg4_read_page_raw;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b3a0edbf14..d457d53574 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -621,6 +621,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 
 static struct fsl_elbc_ctrl *elbc_ctrl;
 
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+				uint32_t offset, uint32_t data_len,
+				const uint8_t *buf, int oob_required)
+{
+	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
 static void fsl_elbc_ctrl_init(void)
 {
 	elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
@@ -710,6 +723,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 
 	nand->ecc.read_page = fsl_elbc_read_page;
 	nand->ecc.write_page = fsl_elbc_write_page;
+	nand->ecc.write_subpage = fsl_elbc_write_subpage;
 
 	priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
 
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 79fa88b22f..975b0d4613 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -47,7 +47,7 @@ struct fsl_ifc_ctrl {
 
 	/* device info */
 	struct fsl_ifc regs;
-	uint8_t __iomem *addr;   /* Address of assigned IFC buffer        */
+	void __iomem *addr;      /* Address of assigned IFC buffer        */
 	unsigned int cs_nand;    /* On which chipsel NAND is connected	  */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -577,8 +577,15 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 		fsl_ifc_run_command(mtd);
 
-		/* Chip sometimes reporting write protect even when it's not */
-		out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
+		/*
+		 * The chip always seems to report that it is
+		 * write-protected, even when it is not.
+		 */
+		if (chip->options & NAND_BUSWIDTH_16)
+			ifc_out16(ctrl->addr,
+				  ifc_in16(ctrl->addr) | NAND_STATUS_WP);
+		else
+			out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
 		return;
 
 	case NAND_CMD_RESET:
@@ -618,7 +625,7 @@ static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 		len = bufsize - ctrl->index;
 	}
 
-	memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+	memcpy_toio(ctrl->addr + ctrl->index, buf, len);
 	ctrl->index += len;
 }
 
@@ -631,11 +638,16 @@ static u8 fsl_ifc_read_byte(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_ifc_mtd *priv = chip->priv;
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	unsigned int offset;
 
-	/* If there are still bytes in the IFC buffer, then use the
-	 * next byte. */
-	if (ctrl->index < ctrl->read_bytes)
-		return in_8(&ctrl->addr[ctrl->index++]);
+	/*
+	 * If there are still bytes in the IFC buffer, then use the
+	 * next byte.
+	 */
+	if (ctrl->index < ctrl->read_bytes) {
+		offset = ctrl->index++;
+		return in_8(ctrl->addr + offset);
+	}
 
 	printf("%s beyond end of buffer\n", __func__);
 	return ERR_BYTE;
@@ -657,8 +669,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
 	 * next byte.
 	 */
 	if (ctrl->index < ctrl->read_bytes) {
-		data = ifc_in16((uint16_t *)&ctrl->
-				 addr[ctrl->index]);
+		data = ifc_in16(ctrl->addr + ctrl->index);
 		ctrl->index += 2;
 		return (uint8_t)data;
 	}
@@ -681,7 +692,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		return;
 
 	avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
-	memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
+	memcpy_fromio(buf, ctrl->addr + ctrl->index, avail);
 	ctrl->index += avail;
 
 	if (len > avail)
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 9c144a21e1..1d689015a5 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -68,6 +68,8 @@ struct mxs_nand_info {
 };
 
 struct nand_ecclayout fake_ecc_layout;
+static int chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+static int galois_field = 13;
 
 /*
  * Cache management functions
@@ -130,12 +132,12 @@ static void mxs_nand_return_dma_descs(struct mxs_nand_info *info)
 
 static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
 {
-	return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+	return page_data_size / chunk_data_size;
 }
 
 static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
 {
-	return ecc_strength * MXS_NAND_BITS_PER_ECC_LEVEL;
+	return ecc_strength * galois_field;
 }
 
 static uint32_t mxs_nand_aux_status_offset(void)
@@ -157,8 +159,8 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
 	 *		(page oob size - meta data size) * (bits per byte)
 	 */
 	ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
-			/ (MXS_NAND_BITS_PER_ECC_LEVEL *
-				mxs_nand_ecc_chunk_cnt(page_data_size));
+			/ (galois_field *
+			   mxs_nand_ecc_chunk_cnt(page_data_size));
 
 	return round_down(ecc_strength, 2);
 }
@@ -173,7 +175,7 @@ static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
 	uint32_t block_mark_chunk_bit_offset;
 	uint32_t block_mark_bit_offset;
 
-	chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+	chunk_data_size_in_bits = chunk_data_size * 8;
 	chunk_ecc_size_in_bits  = mxs_nand_ecc_size_in_bits(ecc_strength);
 
 	chunk_total_size_in_bits =
@@ -460,6 +462,9 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
 
 	mxs_dma_desc_append(channel, d);
 
+	/* Invalidate caches */
+	mxs_nand_inval_data_buf(nand_info);
+
 	/* Execute the DMA chain. */
 	ret = mxs_dma_go(channel);
 	if (ret) {
@@ -626,6 +631,9 @@ static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
 
 	mxs_dma_desc_append(channel, d);
 
+	/* Invalidate caches */
+	mxs_nand_inval_data_buf(nand_info);
+
 	/* Execute the DMA chain. */
 	ret = mxs_dma_go(channel);
 	if (ret) {
@@ -972,6 +980,16 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd)
 	struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
 	uint32_t tmp;
 
+	if (mtd->oobsize > MXS_NAND_CHUNK_DATA_CHUNK_SIZE) {
+		galois_field = 14;
+		chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 2;
+	}
+
+	if (mtd->oobsize > chunk_data_size) {
+		printf("Not support the NAND chips whose oob size is larger then %d bytes!\n", chunk_data_size);
+		return -EINVAL;
+	}
+
 	/* Configure BCH and set NFC geometry */
 	mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
 
@@ -981,16 +999,18 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd)
 	tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
 	tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
 		<< BCH_FLASHLAYOUT0_ECC0_OFFSET;
-	tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
-		>> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+	tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+	tmp |= (14 == galois_field ? 1 : 0) <<
+		BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET;
 	writel(tmp, &bch_regs->hw_bch_flash0layout0);
 
 	tmp = (mtd->writesize + mtd->oobsize)
 		<< BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
 	tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
 		<< BCH_FLASHLAYOUT1_ECCN_OFFSET;
-	tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
-		>> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+	tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+	tmp |= (14 == galois_field ? 1 : 0) <<
+		BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET;
 	writel(tmp, &bch_regs->hw_bch_flash0layout1);
 
 	/* Set *all* chip selects to use layout 0 */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c0e381ad2d..9e8fc1ffe2 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -29,26 +29,6 @@
  *
  */
 
-#ifndef __UBOOT__
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/nand_bch.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#else
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <common.h>
 #include <malloc.h>
@@ -65,19 +45,7 @@
 #include <asm/io.h>
 #include <asm/errno.h>
 
-/*
- * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
- * a flash.  NAND flash is initialized prior to interrupts so standard timers
- * can't be used.  CONFIG_SYS_NAND_RESET_CNT should be set to a value
- * which is greater than (max NAND reset time / NAND status read time).
- * A conservative default of 200000 (500 us / 25 ns) is used as a default.
- */
-#ifndef CONFIG_SYS_NAND_RESET_CNT
-#define CONFIG_SYS_NAND_RESET_CNT 200000
-#endif
-
 static bool is_module_text_address(unsigned long addr) {return 0;}
-#endif
 
 /* Define default oob placement schemes for large and small page devices */
 static struct nand_ecclayout nand_oob_8 = {
@@ -165,17 +133,8 @@ static void nand_release_device(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-#ifndef __UBOOT__
-	/* Release the controller and the chip */
-	spin_lock(&chip->controller->lock);
-	chip->controller->active = NULL;
-	chip->state = FL_READY;
-	wake_up(&chip->controller->wq);
-	spin_unlock(&chip->controller->lock);
-#else
 	/* De-select the NAND device */
 	chip->select_chip(mtd, -1);
-#endif
 }
 
 /**
@@ -184,11 +143,7 @@ static void nand_release_device(struct mtd_info *mtd)
  *
  * Default read function for 8bit buswidth
  */
-#ifndef __UBOOT__
-static uint8_t nand_read_byte(struct mtd_info *mtd)
-#else
 uint8_t nand_read_byte(struct mtd_info *mtd)
-#endif
 {
 	struct nand_chip *chip = mtd->priv;
 	return readb(chip->IO_ADDR_R);
@@ -196,7 +151,6 @@ uint8_t nand_read_byte(struct mtd_info *mtd)
 
 /**
  * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
- * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
  * @mtd: MTD device structure
  *
  * Default read function for 16bit buswidth with endianness conversion.
@@ -288,7 +242,7 @@ static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
 	chip->write_buf(mtd, (uint8_t *)&word, 2);
 }
 
-#if defined(__UBOOT__) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_BLACKFIN)
 static void iowrite8_rep(void *addr, const uint8_t *buf, int len)
 {
 	int i;
@@ -331,11 +285,7 @@ static void iowrite16_rep(void *addr, void *buf, int len)
  *
  * Default write function for 8bit buswidth.
  */
-#ifndef __UBOOT__
-static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -350,11 +300,7 @@ void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
  *
  * Default read function for 8bit buswidth.
  */
-#ifndef __UBOOT__
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
 void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -369,11 +315,7 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
  *
  * Default write function for 16bit buswidth.
  */
-#ifndef __UBOOT__
-static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
 void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
 {
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
@@ -389,11 +331,7 @@ void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
  *
  * Default read function for 16bit buswidth.
  */
-#ifndef __UBOOT__
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
 void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
 {
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
@@ -477,7 +415,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	uint8_t buf[2] = { 0, 0 };
 	int ret = 0, res, i = 0;
 
-	ops.datbuf = NULL;
+	memset(&ops, 0, sizeof(ops));
 	ops.oobbuf = buf;
 	ops.ooboffs = chip->badblockpos;
 	if (chip->options & NAND_BUSWIDTH_16) {
@@ -575,6 +513,23 @@ static int nand_check_wp(struct mtd_info *mtd)
 }
 
 /**
+ * nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * Check if the block is marked as reserved.
+ */
+static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (!chip->bbt)
+		return 0;
+	/* Return info from the table */
+	return nand_isreserved_bbt(mtd, ofs);
+}
+
+/**
  * nand_block_checkbad - [GENERIC] Check if a block is marked bad
  * @mtd: MTD device structure
  * @ofs: offset from device start
@@ -602,50 +557,10 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
 }
 
-#ifndef __UBOOT__
-/**
- * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
- *
- * Helper function for nand_wait_ready used when needing to wait in interrupt
- * context.
- */
-static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
-{
-	struct nand_chip *chip = mtd->priv;
-	int i;
-
-	/* Wait for the device to get ready */
-	for (i = 0; i < timeo; i++) {
-		if (chip->dev_ready(mtd))
-			break;
-		touch_softlockup_watchdog();
-		mdelay(1);
-	}
-}
-#endif
-
 /* Wait for the ready pin, after a command. The timeout is caught later. */
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
-	unsigned long timeo = jiffies + msecs_to_jiffies(20);
-
-	/* 400ms timeout */
-	if (in_interrupt() || oops_in_progress)
-		return panic_nand_wait_ready(mtd, 400);
-
-	led_trigger_event(nand_led_trigger, LED_FULL);
-	/* Wait until command is processed or timeout occurs */
-	do {
-		if (chip->dev_ready(mtd))
-			break;
-		touch_softlockup_watchdog();
-	} while (time_before(jiffies, timeo));
-	led_trigger_event(nand_led_trigger, LED_OFF);
-#else
 	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
 	u32 time_start;
 
@@ -656,11 +571,31 @@ void nand_wait_ready(struct mtd_info *mtd)
 			if (chip->dev_ready(mtd))
 				break;
 	}
-#endif
 }
 EXPORT_SYMBOL_GPL(nand_wait_ready);
 
 /**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	register struct nand_chip *chip = mtd->priv;
+	u32 time_start;
+
+	timeo = (CONFIG_SYS_HZ * timeo) / 1000;
+	time_start = get_timer(0);
+	while (get_timer(time_start) < timeo) {
+		if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+			break;
+		WATCHDOG_RESET();
+	}
+};
+
+/**
  * nand_command - [DEFAULT] Send command to NAND device
  * @mtd: MTD device structure
  * @command: the command to be sent
@@ -675,7 +610,6 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 {
 	register struct nand_chip *chip = mtd->priv;
 	int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
-	uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
 
 	/* Write out the command to the device */
 	if (command == NAND_CMD_SEQIN) {
@@ -739,8 +673,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			       NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd,
 			       NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
-			(rst_sts_cnt--));
+		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		nand_wait_status_ready(mtd, 250);
 		return;
 
 		/* This applies to read commands */
@@ -778,7 +712,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			    int column, int page_addr)
 {
 	register struct nand_chip *chip = mtd->priv;
-	uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
 
 	/* Emulate NAND_CMD_READOOB */
 	if (command == NAND_CMD_READOOB) {
@@ -816,7 +749,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 
 	/*
 	 * Program and erase have their own busy handlers status, sequential
-	 * in, and deplete1 need no delay.
+	 * in and status need no delay.
 	 */
 	switch (command) {
 
@@ -837,8 +770,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
 			       NAND_NCE | NAND_CTRL_CHANGE);
-		while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
-			(rst_sts_cnt--));
+		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		nand_wait_status_ready(mtd, 250);
 		return;
 
 	case NAND_CMD_RNDOUT:
@@ -903,39 +836,8 @@ static int
 nand_get_device(struct mtd_info *mtd, int new_state)
 {
 	struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
-	spinlock_t *lock = &chip->controller->lock;
-	wait_queue_head_t *wq = &chip->controller->wq;
-	DECLARE_WAITQUEUE(wait, current);
-retry:
-	spin_lock(lock);
-
-	/* Hardware controller shared among independent devices */
-	if (!chip->controller->active)
-		chip->controller->active = chip;
-
-	if (chip->controller->active == chip && chip->state == FL_READY) {
-		chip->state = new_state;
-		spin_unlock(lock);
-		return 0;
-	}
-	if (new_state == FL_PM_SUSPENDED) {
-		if (chip->controller->active->state == FL_PM_SUSPENDED) {
-			chip->state = FL_PM_SUSPENDED;
-			spin_unlock(lock);
-			return 0;
-		}
-	}
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	add_wait_queue(wq, &wait);
-	spin_unlock(lock);
-	schedule();
-	remove_wait_queue(wq, &wait);
-	goto retry;
-#else
 	chip->state = new_state;
 	return 0;
-#endif
 }
 
 /**
@@ -989,23 +891,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
-#ifndef __UBOOT__
-	if (in_interrupt() || oops_in_progress)
-		panic_nand_wait(mtd, chip, timeo);
-	else {
-		timeo = jiffies + msecs_to_jiffies(timeo);
-		while (time_before(jiffies, timeo)) {
-			if (chip->dev_ready) {
-				if (chip->dev_ready(mtd))
-					break;
-			} else {
-				if (chip->read_byte(mtd) & NAND_STATUS_READY)
-					break;
-			}
-			cond_resched();
-		}
-	}
-#else
  	u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
  	u32 time_start;
  
@@ -1019,7 +904,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 				break;
 		}
 	}
-#endif
 	led_trigger_event(nand_led_trigger, LED_OFF);
 
 	status = (int)chip->read_byte(mtd);
@@ -1028,162 +912,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	return status;
 }
 
-#ifndef __UBOOT__
-/**
- * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- *                    upper boundary address
- *          when = 1, unlock the range of blocks outside the boundaries
- *                    of the lower and upper boundary address
- *
- * Returs unlock status.
- */
-static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
-					uint64_t len, int invert)
-{
-	int ret = 0;
-	int status, page;
-	struct nand_chip *chip = mtd->priv;
-
-	/* Submit address of first page to unlock */
-	page = ofs >> chip->page_shift;
-	chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
-
-	/* Submit address of last page to unlock */
-	page = (ofs + len) >> chip->page_shift;
-	chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
-				(page | invert) & chip->pagemask);
-
-	/* Call wait ready function */
-	status = chip->waitfunc(mtd, chip);
-	/* See if device thinks it succeeded */
-	if (status & NAND_STATUS_FAIL) {
-		pr_debug("%s: error status = 0x%08x\n",
-					__func__, status);
-		ret = -EIO;
-	}
-
-	return ret;
-}
-
-/**
- * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * Returns unlock status.
- */
-int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	int ret = 0;
-	int chipnr;
-	struct nand_chip *chip = mtd->priv;
-
-	pr_debug("%s: start = 0x%012llx, len = %llu\n",
-			__func__, (unsigned long long)ofs, len);
-
-	if (check_offs_len(mtd, ofs, len))
-		ret = -EINVAL;
-
-	/* Align to last block address if size addresses end of the device */
-	if (ofs + len == mtd->size)
-		len -= mtd->erasesize;
-
-	nand_get_device(mtd, FL_UNLOCKING);
-
-	/* Shift to get chip number */
-	chipnr = ofs >> chip->chip_shift;
-
-	chip->select_chip(mtd, chipnr);
-
-	/* Check, if it is write protected */
-	if (nand_check_wp(mtd)) {
-		pr_debug("%s: device is write protected!\n",
-					__func__);
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = __nand_unlock(mtd, ofs, len, 0);
-
-out:
-	chip->select_chip(mtd, -1);
-	nand_release_device(mtd);
-
-	return ret;
-}
-EXPORT_SYMBOL(nand_unlock);
-
-/**
- * nand_lock - [REPLACEABLE] locks all blocks present in the device
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * This feature is not supported in many NAND parts. 'Micron' NAND parts do
- * have this feature, but it allows only to lock all blocks, not for specified
- * range for block. Implementing 'lock' feature by making use of 'unlock', for
- * now.
- *
- * Returns lock status.
- */
-int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	int ret = 0;
-	int chipnr, status, page;
-	struct nand_chip *chip = mtd->priv;
-
-	pr_debug("%s: start = 0x%012llx, len = %llu\n",
-			__func__, (unsigned long long)ofs, len);
-
-	if (check_offs_len(mtd, ofs, len))
-		ret = -EINVAL;
-
-	nand_get_device(mtd, FL_LOCKING);
-
-	/* Shift to get chip number */
-	chipnr = ofs >> chip->chip_shift;
-
-	chip->select_chip(mtd, chipnr);
-
-	/* Check, if it is write protected */
-	if (nand_check_wp(mtd)) {
-		pr_debug("%s: device is write protected!\n",
-					__func__);
-		status = MTD_ERASE_FAILED;
-		ret = -EIO;
-		goto out;
-	}
-
-	/* Submit address of first page to lock */
-	page = ofs >> chip->page_shift;
-	chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
-
-	/* Call wait ready function */
-	status = chip->waitfunc(mtd, chip);
-	/* See if device thinks it succeeded */
-	if (status & NAND_STATUS_FAIL) {
-		pr_debug("%s: error status = 0x%08x\n",
-					__func__, status);
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = __nand_unlock(mtd, ofs, len, 0x1);
-
-out:
-	chip->select_chip(mtd, -1);
-	nand_release_device(mtd);
-
-	return ret;
-}
-EXPORT_SYMBOL(nand_lock);
-#endif
-
 /**
  * nand_read_page_raw - [INTERN] read raw page data without ecc
  * @mtd: mtd info structure
@@ -1341,8 +1069,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
 	 */
 	for (i = 0; i < eccfrag_len - 1; i++) {
-		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
-			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+		if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
 			gaps = 1;
 			break;
 		}
@@ -1638,6 +1365,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		mtd->oobavail : mtd->oobsize;
 
 	uint8_t *bufpoi, *oob, *buf;
+	int use_bufpoi;
 	unsigned int max_bitflips = 0;
 	int retry_mode = 0;
 	bool ecc_fail = false;
@@ -1661,9 +1389,18 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		bytes = min(mtd->writesize - col, readlen);
 		aligned = (bytes == mtd->writesize);
 
+		if (!aligned)
+			use_bufpoi = 1;
+		else
+			use_bufpoi = 0;
+
 		/* Is the current page in the buffer? */
 		if (realpage != chip->pagebuf || oob) {
-			bufpoi = aligned ? buf : chip->buffers->databuf;
+			bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
+
+			if (use_bufpoi && aligned)
+				pr_debug("%s: using read bounce buffer for buf@%p\n",
+						 __func__, buf);
 
 read_retry:
 			chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
@@ -1685,7 +1422,7 @@ read_retry:
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
 							  oob_required, page);
 			if (ret < 0) {
-				if (!aligned)
+				if (use_bufpoi)
 					/* Invalidate page cache */
 					chip->pagebuf = -1;
 				break;
@@ -1694,7 +1431,7 @@ read_retry:
 			max_bitflips = max_t(unsigned int, max_bitflips, ret);
 
 			/* Transfer not aligned data */
-			if (!aligned) {
+			if (use_bufpoi) {
 				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
 				    !(mtd->ecc_stats.failed - ecc_failures) &&
 				    (ops->mode != MTD_OPS_RAW)) {
@@ -1808,9 +1545,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret;
 
 	nand_get_device(mtd, FL_READING);
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 	ret = nand_do_read_ops(mtd, from, &ops);
 	*retlen = ops.retlen;
@@ -1842,11 +1579,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 				  int page)
 {
-	uint8_t *buf = chip->oob_poi;
 	int length = mtd->oobsize;
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
 	int eccsize = chip->ecc.size;
-	uint8_t *bufpoi = buf;
+	uint8_t *bufpoi = chip->oob_poi;
 	int i, toread, sndrnd = 0, pos;
 
 	chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
@@ -2219,7 +1955,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 
 
 /**
- * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @offset:	column address of subpage within the page
@@ -2479,13 +2215,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	if (!writelen)
 		return 0;
 
-#ifndef __UBOOT__
-	/* Reject writes, which are not page aligned */
-	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-#else
 	/* Reject writes, which are not page aligned */
 	if (NOTALIGNED(to)) {
-#endif
 		pr_notice("%s: attempt to write non page aligned data\n",
 			   __func__);
 		return -EINVAL;
@@ -2507,8 +2238,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
 
 	/* Invalidate the page cache, when we write to the cached page */
-	if (to <= (chip->pagebuf << chip->page_shift) &&
-	    (chip->pagebuf << chip->page_shift) < (to + ops->len))
+	if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
+	    ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
 		chip->pagebuf = -1;
 
 	/* Don't allow multipage oob writes with offset */
@@ -2521,12 +2252,22 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 		int bytes = mtd->writesize;
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
+		int use_bufpoi;
+		int part_pagewr = (column || writelen < (mtd->writesize - 1));
+
+		if (part_pagewr)
+			use_bufpoi = 1;
+		else
+			use_bufpoi = 0;
 
 		WATCHDOG_RESET();
-		/* Partial page write? */
-		if (unlikely(column || writelen < (mtd->writesize - 1))) {
+		/* Partial page write?, or need to use bounce buffer */
+		if (use_bufpoi) {
+			pr_debug("%s: using write bounce buffer for buf@%p\n",
+					 __func__, buf);
 			cached = 0;
-			bytes = min_t(int, bytes - column, (int) writelen);
+			if (part_pagewr)
+				bytes = min_t(int, bytes - column, writelen);
 			chip->pagebuf = -1;
 			memset(chip->buffers->databuf, 0xff, mtd->writesize);
 			memcpy(&chip->buffers->databuf[column], buf, bytes);
@@ -2597,9 +2338,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 
 	ret = nand_do_write_ops(mtd, to, &ops);
@@ -2625,9 +2366,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int ret;
 
 	nand_get_device(mtd, FL_WRITING);
+	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
-	ops.oobbuf = NULL;
 	ops.mode = MTD_OPS_PLACE_OOB;
 	ret = nand_do_write_ops(mtd, to, &ops);
 	*retlen = ops.retlen;
@@ -2764,18 +2505,20 @@ out:
 }
 
 /**
- * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * single_erase - [GENERIC] NAND standard block erase command function
  * @mtd: MTD device structure
  * @page: the page address of the block which will be erased
  *
- * Standard erase command for NAND chips.
+ * Standard erase command for NAND chips. Returns NAND status.
  */
-static void single_erase_cmd(struct mtd_info *mtd, int page)
+static int single_erase(struct mtd_info *mtd, int page)
 {
 	struct nand_chip *chip = mtd->priv;
 	/* Send commands to erase a block */
 	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
 	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+	return chip->waitfunc(mtd, chip);
 }
 
 /**
@@ -2858,9 +2601,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
 
-		chip->erase_cmd(mtd, page & chip->pagemask);
-
-		status = chip->waitfunc(mtd, chip);
+		status = chip->erase(mtd, page & chip->pagemask);
 
 		/*
 		 * See if operation failed and additional status checks are
@@ -3013,32 +2754,6 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
-#ifndef __UBOOT__
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
-	return nand_get_device(mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (chip->state == FL_PM_SUSPENDED)
-		nand_release_device(mtd);
-	else
-		pr_err("%s called for a chip which is not in suspended state\n",
-			__func__);
-}
-#endif
-
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
@@ -3090,11 +2805,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 }
 
 /* Sanitize ONFI strings so we can safely print them */
-#ifndef __UBOOT__
-static void sanitize_string(uint8_t *s, size_t len)
-#else
 static void sanitize_string(char *s, size_t len)
-#endif
 {
 	ssize_t i;
 
@@ -3160,11 +2871,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
 	 * Check the signature.
 	 * Do not strictly follow the ONFI spec, maybe changed in future.
 	 */
-#ifndef __UBOOT__
-	if (strncmp(ep->sig, "EPPS", 4)) {
-#else
 	if (strncmp((char *)ep->sig, "EPPS", 4)) {
-#endif
 		pr_debug("The signature is invalid.\n");
 		goto ext_out;
 	}
@@ -3695,11 +3402,7 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
 static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
 		   struct nand_flash_dev *type, u8 *id_data, int *busw)
 {
-#ifndef __UBOOT__
-	if (!strncmp(type->id, id_data, type->id_len)) {
-#else
 	if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) {
-#endif
 		mtd->writesize = type->pagesize;
 		mtd->erasesize = type->erasesize;
 		mtd->oobsize = type->oobsize;
@@ -3709,6 +3412,8 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->options |= type->options;
 		chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
 		chip->ecc_step_ds = NAND_ECC_STEP(type);
+		chip->onfi_timing_mode_default =
+					type->onfi_timing_mode_default;
 
 		*busw = type->options & NAND_BUSWIDTH_16;
 
@@ -3781,7 +3486,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 
 	chip->onfi_version = 0;
 	if (!type->name || !type->pagesize) {
-		/* Check is chip is ONFI compliant */
+		/* Check if the chip is ONFI compliant */
 		if (nand_flash_detect_onfi(mtd, chip, &busw))
 			goto ident_done;
 
@@ -3859,7 +3564,7 @@ ident_done:
 	}
 
 	chip->badblockbits = 8;
-	chip->erase_cmd = single_erase_cmd;
+	chip->erase = single_erase;
 
 	/* Do not replace user supplied command function! */
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
@@ -3890,9 +3595,9 @@ ident_done:
 		type->name);
 #endif
 
-	pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+	pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
 		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
-		mtd->writesize, mtd->oobsize);
+		mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
 	return type;
 }
 
@@ -3959,6 +3664,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 }
 EXPORT_SYMBOL(nand_scan_ident);
 
+/*
+ * Check if the chip configuration meet the datasheet requirements.
+
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+static bool nand_ecc_strength_good(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int corr, ds_corr;
+
+	if (ecc->size == 0 || chip->ecc_step_ds == 0)
+		/* Not enough information */
+		return true;
+
+	/*
+	 * We get the number of corrected bits per page to compare
+	 * the correction density.
+	 */
+	corr = (mtd->writesize * ecc->strength) / ecc->size;
+	ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+
+	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+}
 
 /**
  * nand_scan_tail - [NAND Interface] Scan for the NAND device
@@ -3980,18 +3718,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 			!(chip->bbt_options & NAND_BBT_USE_FLASH));
 
 	if (!(chip->options & NAND_OWN_BUFFERS)) {
-#ifndef __UBOOT__
-		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
-				+ mtd->oobsize * 3, GFP_KERNEL);
-		if (!nbuf)
-			return -ENOMEM;
-		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
-		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
-		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-#else
 		nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
-#endif
-
 		chip->buffers = nbuf;
 	} else {
 		if (!chip->buffers)
@@ -4037,8 +3764,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
-			pr_warn("No ECC functions supplied; "
-				   "hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
 			BUG();
 		}
 		if (!ecc->read_page)
@@ -4069,8 +3795,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		     ecc->read_page == nand_read_page_hwecc ||
 		     !ecc->write_page ||
 		     ecc->write_page == nand_write_page_hwecc)) {
-			pr_warn("No ECC functions supplied; "
-				   "hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; hardware ECC not possible\n");
 			BUG();
 		}
 		/* Use standard syndrome read/write page function? */
@@ -4094,9 +3819,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 			}
 			break;
 		}
-		pr_warn("%d byte HW ECC not possible on "
-			   "%d byte page size, fallback to SW ECC\n",
-			   ecc->size, mtd->writesize);
+		pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+			ecc->size, mtd->writesize);
 		ecc->mode = NAND_ECC_SOFT;
 
 	case NAND_ECC_SOFT:
@@ -4130,27 +3854,28 @@ int nand_scan_tail(struct mtd_info *mtd)
 		ecc->read_oob = nand_read_oob_std;
 		ecc->write_oob = nand_write_oob_std;
 		/*
-		 * Board driver should supply ecc.size and ecc.bytes values to
-		 * select how many bits are correctable; see nand_bch_init()
-		 * for details. Otherwise, default to 4 bits for large page
-		 * devices.
+		 * Board driver should supply ecc.size and ecc.strength values
+		 * to select how many bits are correctable. Otherwise, default
+		 * to 4 bits for large page devices.
 		 */
 		if (!ecc->size && (mtd->oobsize >= 64)) {
 			ecc->size = 512;
-			ecc->bytes = 7;
+			ecc->strength = 4;
 		}
+
+		/* See nand_bch_init() for details. */
+		ecc->bytes = DIV_ROUND_UP(
+				ecc->strength * fls(8 * ecc->size), 8);
 		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
 					       &ecc->layout);
 		if (!ecc->priv) {
 			pr_warn("BCH ECC initialization failed!\n");
 			BUG();
 		}
-		ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
 		break;
 
 	case NAND_ECC_NONE:
-		pr_warn("NAND_ECC_NONE selected by board driver. "
-			   "This is not recommended!\n");
+		pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
 		ecc->read_page = nand_read_page_raw;
 		ecc->write_page = nand_write_page_raw;
 		ecc->read_oob = nand_read_oob_std;
@@ -4183,6 +3908,11 @@ int nand_scan_tail(struct mtd_info *mtd)
 		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
 	mtd->oobavail = ecc->layout->oobavail;
 
+	/* ECC sanity check: warn if it's too weak */
+	if (!nand_ecc_strength_good(mtd))
+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+			mtd->name);
+
 	/*
 	 * Set the number of read / write steps for one page depending on ECC
 	 * mode.
@@ -4216,18 +3946,22 @@ int nand_scan_tail(struct mtd_info *mtd)
 	chip->pagebuf = -1;
 
 	/* Large page NAND with SOFT_ECC should support subpage reads */
-	if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
-		chip->options |= NAND_SUBPAGE_READ;
+	switch (ecc->mode) {
+	case NAND_ECC_SOFT:
+	case NAND_ECC_SOFT_BCH:
+		if (chip->page_shift > 9)
+			chip->options |= NAND_SUBPAGE_READ;
+		break;
+
+	default:
+		break;
+	}
 
 	/* Fill in remaining MTD driver data */
 	mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
 						MTD_CAP_NANDFLASH;
 	mtd->_erase = nand_erase;
-#ifndef __UBOOT__
-	mtd->_point = NULL;
-	mtd->_unpoint = NULL;
-#endif
 	mtd->_read = nand_read;
 	mtd->_write = nand_write;
 	mtd->_panic_write = panic_nand_write;
@@ -4236,10 +3970,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->_sync = nand_sync;
 	mtd->_lock = NULL;
 	mtd->_unlock = NULL;
-#ifndef __UBOOT__
-	mtd->_suspend = nand_suspend;
-	mtd->_resume = nand_resume;
-#endif
+	mtd->_block_isreserved = nand_block_isreserved;
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
 	mtd->writebufsize = mtd->writesize;
@@ -4254,7 +3985,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 * properly set.
 	 */
 	if (!mtd->bitflip_threshold)
-		mtd->bitflip_threshold = mtd->ecc_strength;
+		mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
 
 	return 0;
 }
@@ -4299,44 +4030,6 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 }
 EXPORT_SYMBOL(nand_scan);
 
-#ifndef __UBOOT__
-/**
- * nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
- */
-void nand_release(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
-		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
-
-	mtd_device_unregister(mtd);
-
-	/* Free bad block table memory */
-	kfree(chip->bbt);
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		kfree(chip->buffers);
-
-	/* Free bad block descriptor memory */
-	if (chip->badblock_pattern && chip->badblock_pattern->options
-			& NAND_BBT_DYNAMICSTRUCT)
-		kfree(chip->badblock_pattern);
-}
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
-	led_trigger_register_simple("nand-disk", &nand_led_trigger);
-	return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
-	led_trigger_unregister_simple(nand_led_trigger);
-}
-#endif
-
 module_init(nand_base_init);
 module_exit(nand_base_exit);
 
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index cf4a82d93a..00f28a4157 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -59,30 +59,15 @@
  *
  */
 
-#ifndef __UBOOT__
-#include <linux/slab.h>
-#include <linux/types.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/bbm.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#include <linux/export.h>
 #include <linux/string.h>
-#else
-#include <common.h>
-#include <malloc.h>
-#include <linux/compat.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/bbm.h>
- #include <linux/mtd/nand.h>
- #include <linux/mtd/nand_ecc.h>
- #include <linux/bitops.h>
- #include <linux/string.h>
-#endif
 
 #define BBT_BLOCK_GOOD		0x00
 #define BBT_BLOCK_WORN		0x01
@@ -214,12 +199,12 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 		res = mtd_read(mtd, from, len, &retlen, buf);
 		if (res < 0) {
 			if (mtd_is_eccerr(res)) {
-				pr_info("nand_bbt: ECC error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				return res;
 			} else if (mtd_is_bitflip(res)) {
-				pr_info("nand_bbt: corrected error in BBT at "
-					"0x%012llx\n", from & ~mtd->writesize);
+				pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+					from & ~mtd->writesize);
 				ret = res;
 			} else {
 				pr_info("nand_bbt: error reading BBT\n");
@@ -541,11 +526,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 {
 	struct nand_chip *this = mtd->priv;
 	int i, chips;
-#ifndef __UBOOT__
-	int bits, startblock, block, dir;
-#else
 	int startblock, block, dir;
-#endif
 	int scanlen = mtd->writesize + mtd->oobsize;
 	int bbtblocks;
 	int blocktopage = this->bbt_erase_shift - this->page_shift;
@@ -569,11 +550,6 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		bbtblocks = mtd->size >> this->bbt_erase_shift;
 	}
 
-#ifndef __UBOOT__
-	/* Number of bits for each erase block in the bbt */
-	bits = td->options & NAND_BBT_NRBITS_MSK;
-#endif
-
 	for (i = 0; i < chips; i++) {
 		/* Reset version information */
 		td->version[i] = 0;
@@ -602,8 +578,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		if (td->pages[i] == -1)
 			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			pr_info("Bad block table found at page %d, version "
-				 "0x%02X\n", td->pages[i], td->version[i]);
+			pr_info("Bad block table found at page %d, version 0x%02X\n",
+				td->pages[i], td->version[i]);
 	}
 	return 0;
 }
@@ -747,12 +723,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			res = mtd_read(mtd, to, len, &retlen, buf);
 			if (res < 0) {
 				if (retlen != len) {
-					pr_info("nand_bbt: error reading block "
-						"for writing the bad block table\n");
+					pr_info("nand_bbt: error reading block for writing the bad block table\n");
 					return res;
 				}
-				pr_warn("nand_bbt: ECC error while reading "
-					"block for writing bad block table\n");
+				pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
 			}
 			/* Read oob data */
 			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -1304,6 +1278,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this)
 int nand_default_bbt(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
+	int ret;
 
 	/* Is a flash based bad block table requested? */
 	if (this->bbt_options & NAND_BBT_USE_FLASH) {
@@ -1322,13 +1297,30 @@ int nand_default_bbt(struct mtd_info *mtd)
 		this->bbt_md = NULL;
 	}
 
-	if (!this->badblock_pattern)
-		nand_create_badblock_pattern(this);
+	if (!this->badblock_pattern) {
+		ret = nand_create_badblock_pattern(this);
+		if (ret)
+			return ret;
+	}
 
 	return nand_scan_bbt(mtd, this->badblock_pattern);
 }
 
 /**
+ * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ */
+int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
+{
+	struct nand_chip *this = mtd->priv;
+	int block;
+
+	block = (int)(offs >> this->bbt_erase_shift);
+	return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
+}
+
+/**
  * nand_isbad_bbt - [NAND Interface] Check if a block is bad
  * @mtd: MTD device structure
  * @offs: offset in the device
@@ -1342,9 +1334,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 	block = (int)(offs >> this->bbt_erase_shift);
 	res = bbt_get_entry(this, block);
 
-	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
-			"(block %d) 0x%02x\n",
-			(unsigned int)offs, block, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+		 (unsigned int)offs, block, res);
 
 	switch (res) {
 	case BBT_BLOCK_GOOD:
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 9ed05778d3..fdd00741dc 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -8,13 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-#ifndef __UBOOT__
-#include <linux/module.h>
-#include <linux/mtd/nand.h>
-#else
 #include <common.h>
 #include <linux/mtd/nand.h>
-#endif
 #include <linux/sizes.h>
 
 #define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
@@ -61,6 +56,10 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"SDTNRGAMA 64G 3.3V 8-bit",
 		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
 		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
+		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+		  SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+		  4 },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
@@ -189,6 +188,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_EON, "Eon"},
 	{NAND_MFR_SANDISK, "SanDisk"},
 	{NAND_MFR_INTEL, "Intel"},
+	{NAND_MFR_ATO, "ATO"},
 	{0x0, "Unknown"}
 };
 
diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
new file mode 100644
index 0000000000..53dcbd323d
--- /dev/null
+++ b/drivers/mtd/nand/nand_timings.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2014 Free Electrons
+ *
+ *  Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <common.h>
+#include <linux/kernel.h>
+#include <linux/mtd/nand.h>
+
+static const struct nand_sdr_timings onfi_sdr_timings[] = {
+	/* Mode 0 */
+	{
+		.tADL_min = 200000,
+		.tALH_min = 20000,
+		.tALS_min = 50000,
+		.tAR_min = 25000,
+		.tCEA_max = 100000,
+		.tCEH_min = 20000,
+		.tCH_min = 20000,
+		.tCHZ_max = 100000,
+		.tCLH_min = 20000,
+		.tCLR_min = 20000,
+		.tCLS_min = 50000,
+		.tCOH_min = 0,
+		.tCS_min = 70000,
+		.tDH_min = 20000,
+		.tDS_min = 40000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 10000,
+		.tITC_max = 1000000,
+		.tRC_min = 100000,
+		.tREA_max = 40000,
+		.tREH_min = 30000,
+		.tRHOH_min = 0,
+		.tRHW_min = 200000,
+		.tRHZ_max = 200000,
+		.tRLOH_min = 0,
+		.tRP_min = 50000,
+		.tRST_max = 250000000000ULL,
+		.tWB_max = 200000,
+		.tRR_min = 40000,
+		.tWC_min = 100000,
+		.tWH_min = 30000,
+		.tWHR_min = 120000,
+		.tWP_min = 50000,
+		.tWW_min = 100000,
+	},
+	/* Mode 1 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 10000,
+		.tALS_min = 25000,
+		.tAR_min = 10000,
+		.tCEA_max = 45000,
+		.tCEH_min = 20000,
+		.tCH_min = 10000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 10000,
+		.tCLR_min = 10000,
+		.tCLS_min = 25000,
+		.tCOH_min = 15000,
+		.tCS_min = 35000,
+		.tDH_min = 10000,
+		.tDS_min = 20000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 50000,
+		.tREA_max = 30000,
+		.tREH_min = 15000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRP_min = 25000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 45000,
+		.tWH_min = 15000,
+		.tWHR_min = 80000,
+		.tWP_min = 25000,
+		.tWW_min = 100000,
+	},
+	/* Mode 2 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 10000,
+		.tALS_min = 15000,
+		.tAR_min = 10000,
+		.tCEA_max = 30000,
+		.tCEH_min = 20000,
+		.tCH_min = 10000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 10000,
+		.tCLR_min = 10000,
+		.tCLS_min = 15000,
+		.tCOH_min = 15000,
+		.tCS_min = 25000,
+		.tDH_min = 5000,
+		.tDS_min = 15000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 35000,
+		.tREA_max = 25000,
+		.tREH_min = 15000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tRP_min = 17000,
+		.tWC_min = 35000,
+		.tWH_min = 15000,
+		.tWHR_min = 80000,
+		.tWP_min = 17000,
+		.tWW_min = 100000,
+	},
+	/* Mode 3 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 25000,
+		.tDH_min = 5000,
+		.tDS_min = 10000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 30000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRP_min = 15000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 30000,
+		.tWH_min = 10000,
+		.tWHR_min = 80000,
+		.tWP_min = 15000,
+		.tWW_min = 100000,
+	},
+	/* Mode 4 */
+	{
+		.tADL_min = 70000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 30000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 20000,
+		.tDH_min = 5000,
+		.tDS_min = 10000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 25000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 5000,
+		.tRP_min = 12000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 25000,
+		.tWH_min = 10000,
+		.tWHR_min = 80000,
+		.tWP_min = 12000,
+		.tWW_min = 100000,
+	},
+	/* Mode 5 */
+	{
+		.tADL_min = 70000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 30000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 15000,
+		.tDH_min = 5000,
+		.tDS_min = 7000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 20000,
+		.tREA_max = 16000,
+		.tREH_min = 7000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 5000,
+		.tRP_min = 10000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 20000,
+		.tWH_min = 7000,
+		.tWHR_min = 80000,
+		.tWP_min = 10000,
+		.tWW_min = 100000,
+	},
+};
+
+/**
+ * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
+ * timings according to the given ONFI timing mode
+ * @mode: ONFI timing mode
+ */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
+{
+	if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings))
+		return ERR_PTR(-EINVAL);
+
+	return &onfi_sdr_timings[mode];
+}
+EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
new file mode 100644
index 0000000000..1565a9a060
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -0,0 +1,1621 @@
+/*
+ * drivers/mtd/nand/pxa3xx_nand.c
+ *
+ * Copyright © 2005 Intel Corporation
+ * Copyright © 2006 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <nand.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/types.h>
+
+#include "pxa3xx_nand.h"
+
+/* Some U-Boot compatibility macros */
+#define writesl(a, d, s)	__raw_writesl((unsigned long)a, d, s)
+#define readsl(a, d, s)		__raw_readsl((unsigned long)a, d, s)
+#define writesw(a, d, s)	__raw_writesw((unsigned long)a, d, s)
+#define readsw(a, d, s)		__raw_readsw((unsigned long)a, d, s)
+#define writesb(a, d, s)	__raw_writesb((unsigned long)a, d, s)
+#define readsb(a, d, s)		__raw_readsb((unsigned long)a, d, s)
+
+#define TIMEOUT_DRAIN_FIFO	5	/* in ms */
+#define	CHIP_DELAY_TIMEOUT	200
+#define NAND_STOP_DELAY		40
+#define PAGE_CHUNK_SIZE		(2048)
+
+/*
+ * Define a buffer size for the initial command that detects the flash device:
+ * STATUS, READID and PARAM. The largest of these is the PARAM command,
+ * needing 256 bytes.
+ */
+#define INIT_BUFFER_SIZE	256
+
+/* registers and bit definitions */
+#define NDCR		(0x00) /* Control register */
+#define NDTR0CS0	(0x04) /* Timing Parameter 0 for CS0 */
+#define NDTR1CS0	(0x0C) /* Timing Parameter 1 for CS0 */
+#define NDSR		(0x14) /* Status Register */
+#define NDPCR		(0x18) /* Page Count Register */
+#define NDBDR0		(0x1C) /* Bad Block Register 0 */
+#define NDBDR1		(0x20) /* Bad Block Register 1 */
+#define NDECCCTRL	(0x28) /* ECC control */
+#define NDDB		(0x40) /* Data Buffer */
+#define NDCB0		(0x48) /* Command Buffer0 */
+#define NDCB1		(0x4C) /* Command Buffer1 */
+#define NDCB2		(0x50) /* Command Buffer2 */
+
+#define NDCR_SPARE_EN		(0x1 << 31)
+#define NDCR_ECC_EN		(0x1 << 30)
+#define NDCR_DMA_EN		(0x1 << 29)
+#define NDCR_ND_RUN		(0x1 << 28)
+#define NDCR_DWIDTH_C		(0x1 << 27)
+#define NDCR_DWIDTH_M		(0x1 << 26)
+#define NDCR_PAGE_SZ		(0x1 << 24)
+#define NDCR_NCSX		(0x1 << 23)
+#define NDCR_ND_MODE		(0x3 << 21)
+#define NDCR_NAND_MODE		(0x0)
+#define NDCR_CLR_PG_CNT		(0x1 << 20)
+#define NDCR_STOP_ON_UNCOR	(0x1 << 19)
+#define NDCR_RD_ID_CNT_MASK	(0x7 << 16)
+#define NDCR_RD_ID_CNT(x)	(((x) << 16) & NDCR_RD_ID_CNT_MASK)
+
+#define NDCR_RA_START		(0x1 << 15)
+#define NDCR_PG_PER_BLK		(0x1 << 14)
+#define NDCR_ND_ARB_EN		(0x1 << 12)
+#define NDCR_INT_MASK           (0xFFF)
+
+#define NDSR_MASK		(0xfff)
+#define NDSR_ERR_CNT_OFF	(16)
+#define NDSR_ERR_CNT_MASK       (0x1f)
+#define NDSR_ERR_CNT(sr)	((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
+#define NDSR_RDY                (0x1 << 12)
+#define NDSR_FLASH_RDY          (0x1 << 11)
+#define NDSR_CS0_PAGED		(0x1 << 10)
+#define NDSR_CS1_PAGED		(0x1 << 9)
+#define NDSR_CS0_CMDD		(0x1 << 8)
+#define NDSR_CS1_CMDD		(0x1 << 7)
+#define NDSR_CS0_BBD		(0x1 << 6)
+#define NDSR_CS1_BBD		(0x1 << 5)
+#define NDSR_UNCORERR		(0x1 << 4)
+#define NDSR_CORERR		(0x1 << 3)
+#define NDSR_WRDREQ		(0x1 << 2)
+#define NDSR_RDDREQ		(0x1 << 1)
+#define NDSR_WRCMDREQ		(0x1)
+
+#define NDCB0_LEN_OVRD		(0x1 << 28)
+#define NDCB0_ST_ROW_EN         (0x1 << 26)
+#define NDCB0_AUTO_RS		(0x1 << 25)
+#define NDCB0_CSEL		(0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK	(0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x)	(((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
+#define NDCB0_CMD_TYPE_MASK	(0x7 << 21)
+#define NDCB0_CMD_TYPE(x)	(((x) << 21) & NDCB0_CMD_TYPE_MASK)
+#define NDCB0_NC		(0x1 << 20)
+#define NDCB0_DBC		(0x1 << 19)
+#define NDCB0_ADDR_CYC_MASK	(0x7 << 16)
+#define NDCB0_ADDR_CYC(x)	(((x) << 16) & NDCB0_ADDR_CYC_MASK)
+#define NDCB0_CMD2_MASK		(0xff << 8)
+#define NDCB0_CMD1_MASK		(0xff)
+#define NDCB0_ADDR_CYC_SHIFT	(16)
+
+#define EXT_CMD_TYPE_DISPATCH	6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW	5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ	4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR	4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL	3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
+
+/* macros for registers read/write */
+#define nand_writel(info, off, val)	\
+	writel((val), (info)->mmio_base + (off))
+
+#define nand_readl(info, off)		\
+	readl((info)->mmio_base + (off))
+
+/* error code and state */
+enum {
+	ERR_NONE	= 0,
+	ERR_DMABUSERR	= -1,
+	ERR_SENDCMD	= -2,
+	ERR_UNCORERR	= -3,
+	ERR_BBERR	= -4,
+	ERR_CORERR	= -5,
+};
+
+enum {
+	STATE_IDLE = 0,
+	STATE_PREPARED,
+	STATE_CMD_HANDLE,
+	STATE_DMA_READING,
+	STATE_DMA_WRITING,
+	STATE_DMA_DONE,
+	STATE_PIO_READING,
+	STATE_PIO_WRITING,
+	STATE_CMD_DONE,
+	STATE_READY,
+};
+
+enum pxa3xx_nand_variant {
+	PXA3XX_NAND_VARIANT_PXA,
+	PXA3XX_NAND_VARIANT_ARMADA370,
+};
+
+struct pxa3xx_nand_host {
+	struct nand_chip	chip;
+	struct mtd_info         *mtd;
+	void			*info_data;
+
+	/* page size of attached chip */
+	int			use_ecc;
+	int			cs;
+
+	/* calculated from pxa3xx_nand_flash data */
+	unsigned int		col_addr_cycles;
+	unsigned int		row_addr_cycles;
+	size_t			read_id_bytes;
+
+};
+
+struct pxa3xx_nand_info {
+	struct nand_hw_control	controller;
+	struct pxa3xx_nand_platform_data *pdata;
+
+	struct clk		*clk;
+	void __iomem		*mmio_base;
+	unsigned long		mmio_phys;
+	int			cmd_complete, dev_ready;
+
+	unsigned int		buf_start;
+	unsigned int		buf_count;
+	unsigned int		buf_size;
+	unsigned int		data_buff_pos;
+	unsigned int		oob_buff_pos;
+
+	unsigned char		*data_buff;
+	unsigned char		*oob_buff;
+
+	struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
+	unsigned int		state;
+
+	/*
+	 * This driver supports NFCv1 (as found in PXA SoC)
+	 * and NFCv2 (as found in Armada 370/XP SoC).
+	 */
+	enum pxa3xx_nand_variant variant;
+
+	int			cs;
+	int			use_ecc;	/* use HW ECC ? */
+	int			ecc_bch;	/* using BCH ECC? */
+	int			use_spare;	/* use spare ? */
+	int			need_wait;
+
+	unsigned int		data_size;	/* data to be read from FIFO */
+	unsigned int		chunk_size;	/* split commands chunk size */
+	unsigned int		oob_size;
+	unsigned int		spare_size;
+	unsigned int		ecc_size;
+	unsigned int		ecc_err_cnt;
+	unsigned int		max_bitflips;
+	int			retcode;
+
+	/* cached register value */
+	uint32_t		reg_ndcr;
+	uint32_t		ndtr0cs0;
+	uint32_t		ndtr1cs0;
+
+	/* generated NDCBx register values */
+	uint32_t		ndcb0;
+	uint32_t		ndcb1;
+	uint32_t		ndcb2;
+	uint32_t		ndcb3;
+};
+
+static struct pxa3xx_nand_timing timing[] = {
+	{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+	{ 10,  0, 20,  40, 30,  40, 11123, 110, 10, },
+	{ 10, 25, 15,  25, 15,  30, 25000,  60, 10, },
+	{ 10, 35, 15,  25, 15,  25, 25000,  60, 10, },
+};
+
+static struct pxa3xx_nand_flash builtin_flash_types[] = {
+	{ 0x46ec, 16, 16, &timing[1] },
+	{ 0xdaec,  8,  8, &timing[1] },
+	{ 0xd7ec,  8,  8, &timing[1] },
+	{ 0xa12c,  8,  8, &timing[2] },
+	{ 0xb12c, 16, 16, &timing[2] },
+	{ 0xdc2c,  8,  8, &timing[2] },
+	{ 0xcc2c, 16, 16, &timing[2] },
+	{ 0xba20, 16, 16, &timing[3] },
+};
+
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,		/* Last 8 blocks in each chip */
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	8,
+	.len = 6,
+	.veroffs = 14,
+	.maxblocks = 8,		/* Last 8 blocks in each chip */
+	.pattern = bbt_mirror_pattern
+};
+
+static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
+	.eccbytes = 32,
+	.eccpos = {
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63},
+	.oobfree = { {2, 30} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+	.eccbytes = 64,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63,
+		96,  97,  98,  99,  100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127},
+	/* Bootrom looks in bytes 0 & 5 for bad blocks */
+	.oobfree = { {6, 26}, { 64, 32} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+	.eccbytes = 128,
+	.eccpos = {
+		32,  33,  34,  35,  36,  37,  38,  39,
+		40,  41,  42,  43,  44,  45,  46,  47,
+		48,  49,  50,  51,  52,  53,  54,  55,
+		56,  57,  58,  59,  60,  61,  62,  63},
+	.oobfree = { }
+};
+
+#define NDTR0_tCH(c)	(min((c), 7) << 19)
+#define NDTR0_tCS(c)	(min((c), 7) << 16)
+#define NDTR0_tWH(c)	(min((c), 7) << 11)
+#define NDTR0_tWP(c)	(min((c), 7) << 8)
+#define NDTR0_tRH(c)	(min((c), 7) << 3)
+#define NDTR0_tRP(c)	(min((c), 7) << 0)
+
+#define NDTR1_tR(c)	(min((c), 65535) << 16)
+#define NDTR1_tWHR(c)	(min((c), 15) << 4)
+#define NDTR1_tAR(c)	(min((c), 15) << 0)
+
+/* convert nano-seconds to nand flash controller clock cycles */
+#define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
+
+static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
+{
+	/* We only support the Armada 370/XP/38x for now */
+	return PXA3XX_NAND_VARIANT_ARMADA370;
+}
+
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
+				   const struct pxa3xx_nand_timing *t)
+{
+	struct pxa3xx_nand_info *info = host->info_data;
+	unsigned long nand_clk = mvebu_get_nand_clock();
+	uint32_t ndtr0, ndtr1;
+
+	ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
+		NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
+		NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
+		NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
+		NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
+		NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
+
+	ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
+		NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
+		NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
+
+	info->ndtr0cs0 = ndtr0;
+	info->ndtr1cs0 = ndtr1;
+	nand_writel(info, NDTR0CS0, ndtr0);
+	nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static void pxa3xx_nand_set_sdr_timing(struct pxa3xx_nand_host *host,
+				       const struct nand_sdr_timings *t)
+{
+	struct pxa3xx_nand_info *info = host->info_data;
+	struct nand_chip *chip = &host->chip;
+	unsigned long nand_clk = mvebu_get_nand_clock();
+	uint32_t ndtr0, ndtr1;
+
+	u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
+	u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
+	u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
+	u32 tWP_min = DIV_ROUND_UP(t->tWC_min - tWH_min, 1000);
+	u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
+	u32 tRP_min = DIV_ROUND_UP(t->tRC_min - tREH_min, 1000);
+	u32 tR = chip->chip_delay * 1000;
+	u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
+	u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
+
+	/* fallback to a default value if tR = 0 */
+	if (!tR)
+		tR = 20000;
+
+	ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
+		NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
+		NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
+		NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
+		NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
+		NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
+
+	ndtr1 = NDTR1_tR(ns2cycle(tR, nand_clk)) |
+		NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
+		NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
+
+	info->ndtr0cs0 = ndtr0;
+	info->ndtr1cs0 = ndtr1;
+	nand_writel(info, NDTR0CS0, ndtr0);
+	nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static int pxa3xx_nand_init_timings(struct pxa3xx_nand_host *host)
+{
+	const struct nand_sdr_timings *timings;
+	struct nand_chip *chip = &host->chip;
+	struct pxa3xx_nand_info *info = host->info_data;
+	const struct pxa3xx_nand_flash *f = NULL;
+	int mode, id, ntypes, i;
+
+	mode = onfi_get_async_timing_mode(chip);
+	if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+		ntypes = ARRAY_SIZE(builtin_flash_types);
+
+		chip->cmdfunc(host->mtd, NAND_CMD_READID, 0x00, -1);
+
+		id = chip->read_byte(host->mtd);
+		id |= chip->read_byte(host->mtd) << 0x8;
+
+		for (i = 0; i < ntypes; i++) {
+			f = &builtin_flash_types[i];
+
+			if (f->chip_id == id)
+				break;
+		}
+
+		if (i == ntypes) {
+			dev_err(&info->pdev->dev, "Error: timings not found\n");
+			return -EINVAL;
+		}
+
+		pxa3xx_nand_set_timing(host, f->timing);
+
+		if (f->flash_width == 16) {
+			info->reg_ndcr |= NDCR_DWIDTH_M;
+			chip->options |= NAND_BUSWIDTH_16;
+		}
+
+		info->reg_ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
+	} else {
+		mode = fls(mode) - 1;
+		if (mode < 0)
+			mode = 0;
+
+		timings = onfi_async_timing_mode_to_sdr_timings(mode);
+		if (IS_ERR(timings))
+			return PTR_ERR(timings);
+
+		pxa3xx_nand_set_sdr_timing(host, timings);
+	}
+
+	return 0;
+}
+
+/*
+ * Set the data and OOB size, depending on the selected
+ * spare and ECC configuration.
+ * Only applicable to READ0, READOOB and PAGEPROG commands.
+ */
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
+				struct mtd_info *mtd)
+{
+	int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+
+	info->data_size = mtd->writesize;
+	if (!oob_enable)
+		return;
+
+	info->oob_size = info->spare_size;
+	if (!info->use_ecc)
+		info->oob_size += info->ecc_size;
+}
+
+/**
+ * NOTE: it is a must to set ND_RUN firstly, then write
+ * command buffer, otherwise, it does not work.
+ * We enable all the interrupt at the same time, and
+ * let pxa3xx_nand_irq to handle all logic.
+ */
+static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
+{
+	uint32_t ndcr;
+
+	ndcr = info->reg_ndcr;
+
+	if (info->use_ecc) {
+		ndcr |= NDCR_ECC_EN;
+		if (info->ecc_bch)
+			nand_writel(info, NDECCCTRL, 0x1);
+	} else {
+		ndcr &= ~NDCR_ECC_EN;
+		if (info->ecc_bch)
+			nand_writel(info, NDECCCTRL, 0x0);
+	}
+
+	ndcr &= ~NDCR_DMA_EN;
+
+	if (info->use_spare)
+		ndcr |= NDCR_SPARE_EN;
+	else
+		ndcr &= ~NDCR_SPARE_EN;
+
+	ndcr |= NDCR_ND_RUN;
+
+	/* clear status bits and run */
+	nand_writel(info, NDCR, 0);
+	nand_writel(info, NDSR, NDSR_MASK);
+	nand_writel(info, NDCR, ndcr);
+}
+
+static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
+{
+	uint32_t ndcr;
+
+	ndcr = nand_readl(info, NDCR);
+	nand_writel(info, NDCR, ndcr | int_mask);
+}
+
+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
+{
+	if (info->ecc_bch) {
+		u32 ts;
+
+		/*
+		 * According to the datasheet, when reading from NDDB
+		 * with BCH enabled, after each 32 bytes reads, we
+		 * have to make sure that the NDSR.RDDREQ bit is set.
+		 *
+		 * Drain the FIFO 8 32 bits reads at a time, and skip
+		 * the polling on the last read.
+		 */
+		while (len > 8) {
+			readsl(info->mmio_base + NDDB, data, 8);
+
+			ts = get_timer(0);
+			while (!(nand_readl(info, NDSR) & NDSR_RDDREQ)) {
+				if (get_timer(ts) > TIMEOUT_DRAIN_FIFO) {
+					dev_err(&info->pdev->dev,
+						"Timeout on RDDREQ while draining the FIFO\n");
+					return;
+				}
+			}
+
+			data += 32;
+			len -= 8;
+		}
+	}
+
+	readsl(info->mmio_base + NDDB, data, len);
+}
+
+static void handle_data_pio(struct pxa3xx_nand_info *info)
+{
+	unsigned int do_bytes = min(info->data_size, info->chunk_size);
+
+	switch (info->state) {
+	case STATE_PIO_WRITING:
+		writesl(info->mmio_base + NDDB,
+			info->data_buff + info->data_buff_pos,
+			DIV_ROUND_UP(do_bytes, 4));
+
+		if (info->oob_size > 0)
+			writesl(info->mmio_base + NDDB,
+				info->oob_buff + info->oob_buff_pos,
+				DIV_ROUND_UP(info->oob_size, 4));
+		break;
+	case STATE_PIO_READING:
+		drain_fifo(info,
+			   info->data_buff + info->data_buff_pos,
+			   DIV_ROUND_UP(do_bytes, 4));
+
+		if (info->oob_size > 0)
+			drain_fifo(info,
+				   info->oob_buff + info->oob_buff_pos,
+				   DIV_ROUND_UP(info->oob_size, 4));
+		break;
+	default:
+		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+			info->state);
+		BUG();
+	}
+
+	/* Update buffer pointers for multi-page read/write */
+	info->data_buff_pos += do_bytes;
+	info->oob_buff_pos += info->oob_size;
+	info->data_size -= do_bytes;
+}
+
+static void pxa3xx_nand_irq_thread(struct pxa3xx_nand_info *info)
+{
+	handle_data_pio(info);
+
+	info->state = STATE_CMD_DONE;
+	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+}
+
+static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
+{
+	unsigned int status, is_completed = 0, is_ready = 0;
+	unsigned int ready, cmd_done;
+	irqreturn_t ret = IRQ_HANDLED;
+
+	if (info->cs == 0) {
+		ready           = NDSR_FLASH_RDY;
+		cmd_done        = NDSR_CS0_CMDD;
+	} else {
+		ready           = NDSR_RDY;
+		cmd_done        = NDSR_CS1_CMDD;
+	}
+
+	status = nand_readl(info, NDSR);
+
+	if (status & NDSR_UNCORERR)
+		info->retcode = ERR_UNCORERR;
+	if (status & NDSR_CORERR) {
+		info->retcode = ERR_CORERR;
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+		    info->ecc_bch)
+			info->ecc_err_cnt = NDSR_ERR_CNT(status);
+		else
+			info->ecc_err_cnt = 1;
+
+		/*
+		 * Each chunk composing a page is corrected independently,
+		 * and we need to store maximum number of corrected bitflips
+		 * to return it to the MTD layer in ecc.read_page().
+		 */
+		info->max_bitflips = max_t(unsigned int,
+					   info->max_bitflips,
+					   info->ecc_err_cnt);
+	}
+	if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
+		info->state = (status & NDSR_RDDREQ) ?
+			STATE_PIO_READING : STATE_PIO_WRITING;
+		/* Call the IRQ thread in U-Boot directly */
+		pxa3xx_nand_irq_thread(info);
+		return 0;
+	}
+	if (status & cmd_done) {
+		info->state = STATE_CMD_DONE;
+		is_completed = 1;
+	}
+	if (status & ready) {
+		info->state = STATE_READY;
+		is_ready = 1;
+	}
+
+	if (status & NDSR_WRCMDREQ) {
+		nand_writel(info, NDSR, NDSR_WRCMDREQ);
+		status &= ~NDSR_WRCMDREQ;
+		info->state = STATE_CMD_HANDLE;
+
+		/*
+		 * Command buffer registers NDCB{0-2} (and optionally NDCB3)
+		 * must be loaded by writing directly either 12 or 16
+		 * bytes directly to NDCB0, four bytes at a time.
+		 *
+		 * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
+		 * but each NDCBx register can be read.
+		 */
+		nand_writel(info, NDCB0, info->ndcb0);
+		nand_writel(info, NDCB0, info->ndcb1);
+		nand_writel(info, NDCB0, info->ndcb2);
+
+		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+			nand_writel(info, NDCB0, info->ndcb3);
+	}
+
+	/* clear NDSR to let the controller exit the IRQ */
+	nand_writel(info, NDSR, status);
+	if (is_completed)
+		info->cmd_complete = 1;
+	if (is_ready)
+		info->dev_ready = 1;
+
+	return ret;
+}
+
+static inline int is_buf_blank(uint8_t *buf, size_t len)
+{
+	for (; len > 0; len--)
+		if (*buf++ != 0xff)
+			return 0;
+	return 1;
+}
+
+static void set_command_address(struct pxa3xx_nand_info *info,
+		unsigned int page_size, uint16_t column, int page_addr)
+{
+	/* small page addr setting */
+	if (page_size < PAGE_CHUNK_SIZE) {
+		info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
+				| (column & 0xFF);
+
+		info->ndcb2 = 0;
+	} else {
+		info->ndcb1 = ((page_addr & 0xFFFF) << 16)
+				| (column & 0xFFFF);
+
+		if (page_addr & 0xFF0000)
+			info->ndcb2 = (page_addr & 0xFF0000) >> 16;
+		else
+			info->ndcb2 = 0;
+	}
+}
+
+static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
+{
+	struct pxa3xx_nand_host *host = info->host[info->cs];
+	struct mtd_info *mtd = host->mtd;
+
+	/* reset data and oob column point to handle data */
+	info->buf_start		= 0;
+	info->buf_count		= 0;
+	info->oob_size		= 0;
+	info->data_buff_pos	= 0;
+	info->oob_buff_pos	= 0;
+	info->use_ecc		= 0;
+	info->use_spare		= 1;
+	info->retcode		= ERR_NONE;
+	info->ecc_err_cnt	= 0;
+	info->ndcb3		= 0;
+	info->need_wait		= 0;
+
+	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_PAGEPROG:
+		info->use_ecc = 1;
+	case NAND_CMD_READOOB:
+		pxa3xx_set_datasize(info, mtd);
+		break;
+	case NAND_CMD_PARAM:
+		info->use_spare = 0;
+		break;
+	default:
+		info->ndcb1 = 0;
+		info->ndcb2 = 0;
+		break;
+	}
+
+	/*
+	 * If we are about to issue a read command, or about to set
+	 * the write address, then clean the data buffer.
+	 */
+	if (command == NAND_CMD_READ0 ||
+	    command == NAND_CMD_READOOB ||
+	    command == NAND_CMD_SEQIN) {
+		info->buf_count = mtd->writesize + mtd->oobsize;
+		memset(info->data_buff, 0xFF, info->buf_count);
+	}
+}
+
+static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+		int ext_cmd_type, uint16_t column, int page_addr)
+{
+	int addr_cycle, exec_cmd;
+	struct pxa3xx_nand_host *host;
+	struct mtd_info *mtd;
+
+	host = info->host[info->cs];
+	mtd = host->mtd;
+	addr_cycle = 0;
+	exec_cmd = 1;
+
+	if (info->cs != 0)
+		info->ndcb0 = NDCB0_CSEL;
+	else
+		info->ndcb0 = 0;
+
+	if (command == NAND_CMD_SEQIN)
+		exec_cmd = 0;
+
+	addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+				    + host->col_addr_cycles);
+
+	switch (command) {
+	case NAND_CMD_READOOB:
+	case NAND_CMD_READ0:
+		info->buf_start = column;
+		info->ndcb0 |= NDCB0_CMD_TYPE(0)
+				| addr_cycle
+				| NAND_CMD_READ0;
+
+		if (command == NAND_CMD_READOOB)
+			info->buf_start += mtd->writesize;
+
+		/*
+		 * Multiple page read needs an 'extended command type' field,
+		 * which is either naked-read or last-read according to the
+		 * state.
+		 */
+		if (mtd->writesize == PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+		} else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+					| NDCB0_LEN_OVRD
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+			info->ndcb3 = info->chunk_size +
+				      info->oob_size;
+		}
+
+		set_command_address(info, mtd->writesize, column, page_addr);
+		break;
+
+	case NAND_CMD_SEQIN:
+
+		info->buf_start = column;
+		set_command_address(info, mtd->writesize, 0, page_addr);
+
+		/*
+		 * Multiple page programming needs to execute the initial
+		 * SEQIN command that sets the page address.
+		 */
+		if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+				| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+				| addr_cycle
+				| command;
+			/* No data transfer in this case */
+			info->data_size = 0;
+			exec_cmd = 1;
+		}
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		if (is_buf_blank(info->data_buff,
+				 (mtd->writesize + mtd->oobsize))) {
+			exec_cmd = 0;
+			break;
+		}
+
+		/* Second command setting for large pages */
+		if (mtd->writesize > PAGE_CHUNK_SIZE) {
+			/*
+			 * Multiple page write uses the 'extended command'
+			 * field. This can be used to issue a command dispatch
+			 * or a naked-write depending on the current stage.
+			 */
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+					| NDCB0_LEN_OVRD
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+			info->ndcb3 = info->chunk_size +
+				      info->oob_size;
+
+			/*
+			 * This is the command dispatch that completes a chunked
+			 * page program operation.
+			 */
+			if (info->data_size == 0) {
+				info->ndcb0 = NDCB0_CMD_TYPE(0x1)
+					| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+					| command;
+				info->ndcb1 = 0;
+				info->ndcb2 = 0;
+				info->ndcb3 = 0;
+			}
+		} else {
+			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+					| NDCB0_AUTO_RS
+					| NDCB0_ST_ROW_EN
+					| NDCB0_DBC
+					| (NAND_CMD_PAGEPROG << 8)
+					| NAND_CMD_SEQIN
+					| addr_cycle;
+		}
+		break;
+
+	case NAND_CMD_PARAM:
+		info->buf_count = 256;
+		info->ndcb0 |= NDCB0_CMD_TYPE(0)
+				| NDCB0_ADDR_CYC(1)
+				| NDCB0_LEN_OVRD
+				| command;
+		info->ndcb1 = (column & 0xFF);
+		info->ndcb3 = 256;
+		info->data_size = 256;
+		break;
+
+	case NAND_CMD_READID:
+		info->buf_count = host->read_id_bytes;
+		info->ndcb0 |= NDCB0_CMD_TYPE(3)
+				| NDCB0_ADDR_CYC(1)
+				| command;
+		info->ndcb1 = (column & 0xFF);
+
+		info->data_size = 8;
+		break;
+	case NAND_CMD_STATUS:
+		info->buf_count = 1;
+		info->ndcb0 |= NDCB0_CMD_TYPE(4)
+				| NDCB0_ADDR_CYC(1)
+				| command;
+
+		info->data_size = 8;
+		break;
+
+	case NAND_CMD_ERASE1:
+		info->ndcb0 |= NDCB0_CMD_TYPE(2)
+				| NDCB0_AUTO_RS
+				| NDCB0_ADDR_CYC(3)
+				| NDCB0_DBC
+				| (NAND_CMD_ERASE2 << 8)
+				| NAND_CMD_ERASE1;
+		info->ndcb1 = page_addr;
+		info->ndcb2 = 0;
+
+		break;
+	case NAND_CMD_RESET:
+		info->ndcb0 |= NDCB0_CMD_TYPE(5)
+				| command;
+
+		break;
+
+	case NAND_CMD_ERASE2:
+		exec_cmd = 0;
+		break;
+
+	default:
+		exec_cmd = 0;
+		dev_err(&info->pdev->dev, "non-supported command %x\n",
+			command);
+		break;
+	}
+
+	return exec_cmd;
+}
+
+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+			 int column, int page_addr)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int exec_cmd;
+
+	/*
+	 * if this is a x16 device ,then convert the input
+	 * "byte" address into a "word" address appropriate
+	 * for indexing a word-oriented device
+	 */
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		column /= 2;
+
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+	}
+
+	prepare_start_command(info, command);
+
+	info->state = STATE_PREPARED;
+	exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
+	if (exec_cmd) {
+		u32 ts;
+
+		info->cmd_complete = 0;
+		info->dev_ready = 0;
+		info->need_wait = 1;
+		pxa3xx_nand_start(info);
+
+		ts = get_timer(0);
+		while (1) {
+			u32 status;
+
+			status = nand_readl(info, NDSR);
+			if (status)
+				pxa3xx_nand_irq(info);
+
+			if (info->cmd_complete)
+				break;
+
+			if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+				dev_err(&info->pdev->dev, "Wait timeout!!!\n");
+				return;
+			}
+		}
+	}
+	info->state = STATE_IDLE;
+}
+
+static void nand_cmdfunc_extended(struct mtd_info *mtd,
+				  const unsigned command,
+				  int column, int page_addr)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int exec_cmd, ext_cmd_type;
+
+	/*
+	 * if this is a x16 device then convert the input
+	 * "byte" address into a "word" address appropriate
+	 * for indexing a word-oriented device
+	 */
+	if (info->reg_ndcr & NDCR_DWIDTH_M)
+		column /= 2;
+
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+	}
+
+	/* Select the extended command for the first command */
+	switch (command) {
+	case NAND_CMD_READ0:
+	case NAND_CMD_READOOB:
+		ext_cmd_type = EXT_CMD_TYPE_MONO;
+		break;
+	case NAND_CMD_SEQIN:
+		ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+		break;
+	case NAND_CMD_PAGEPROG:
+		ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+		break;
+	default:
+		ext_cmd_type = 0;
+		break;
+	}
+
+	prepare_start_command(info, command);
+
+	/*
+	 * Prepare the "is ready" completion before starting a command
+	 * transaction sequence. If the command is not executed the
+	 * completion will be completed, see below.
+	 *
+	 * We can do that inside the loop because the command variable
+	 * is invariant and thus so is the exec_cmd.
+	 */
+	info->need_wait = 1;
+	info->dev_ready = 0;
+
+	do {
+		u32 ts;
+
+		info->state = STATE_PREPARED;
+		exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+					       column, page_addr);
+		if (!exec_cmd) {
+			info->need_wait = 0;
+			info->dev_ready = 1;
+			break;
+		}
+
+		info->cmd_complete = 0;
+		pxa3xx_nand_start(info);
+
+		ts = get_timer(0);
+		while (1) {
+			u32 status;
+
+			status = nand_readl(info, NDSR);
+			if (status)
+				pxa3xx_nand_irq(info);
+
+			if (info->cmd_complete)
+				break;
+
+			if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+				dev_err(&info->pdev->dev, "Wait timeout!!!\n");
+				return;
+			}
+		}
+
+		/* Check if the sequence is complete */
+		if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+			break;
+
+		/*
+		 * After a splitted program command sequence has issued
+		 * the command dispatch, the command sequence is complete.
+		 */
+		if (info->data_size == 0 &&
+		    command == NAND_CMD_PAGEPROG &&
+		    ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
+			break;
+
+		if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+			/* Last read: issue a 'last naked read' */
+			if (info->data_size == info->chunk_size)
+				ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+			else
+				ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+
+		/*
+		 * If a splitted program command has no more data to transfer,
+		 * the command dispatch must be issued to complete.
+		 */
+		} else if (command == NAND_CMD_PAGEPROG &&
+			   info->data_size == 0) {
+				ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+		}
+	} while (1);
+
+	info->state = STATE_IDLE;
+}
+
+static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+	chip->write_buf(mtd, buf, mtd->writesize);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
+		struct nand_chip *chip, uint8_t *buf, int oob_required,
+		int page)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+
+	chip->read_buf(mtd, buf, mtd->writesize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	if (info->retcode == ERR_CORERR && info->use_ecc) {
+		mtd->ecc_stats.corrected += info->ecc_err_cnt;
+
+	} else if (info->retcode == ERR_UNCORERR) {
+		/*
+		 * for blank page (all 0xff), HW will calculate its ECC as
+		 * 0, which is different from the ECC information within
+		 * OOB, ignore such uncorrectable errors
+		 */
+		if (is_buf_blank(buf, mtd->writesize))
+			info->retcode = ERR_NONE;
+		else
+			mtd->ecc_stats.failed++;
+	}
+
+	return info->max_bitflips;
+}
+
+static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	char retval = 0xFF;
+
+	if (info->buf_start < info->buf_count)
+		/* Has just send a new command? */
+		retval = info->data_buff[info->buf_start++];
+
+	return retval;
+}
+
+static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	u16 retval = 0xFFFF;
+
+	if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
+		retval = *((u16 *)(info->data_buff+info->buf_start));
+		info->buf_start += 2;
+	}
+	return retval;
+}
+
+static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+	memcpy(buf, info->data_buff + info->buf_start, real_len);
+	info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
+		const uint8_t *buf, int len)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+	memcpy(info->data_buff + info->buf_start, buf, real_len);
+	info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	return;
+}
+
+static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+
+	if (info->need_wait) {
+		u32 ts;
+
+		info->need_wait = 0;
+
+		ts = get_timer(0);
+		while (1) {
+			u32 status;
+
+			status = nand_readl(info, NDSR);
+			if (status)
+				pxa3xx_nand_irq(info);
+
+			if (info->dev_ready)
+				break;
+
+			if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+				dev_err(&info->pdev->dev, "Ready timeout!!!\n");
+				return NAND_STATUS_FAIL;
+			}
+		}
+	}
+
+	/* pxa3xx_nand_send_command has waited for command complete */
+	if (this->state == FL_WRITING || this->state == FL_ERASING) {
+		if (info->retcode == ERR_NONE)
+			return 0;
+		else
+			return NAND_STATUS_FAIL;
+	}
+
+	return NAND_STATUS_READY;
+}
+
+static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
+{
+	struct pxa3xx_nand_host *host = info->host[info->cs];
+	struct mtd_info *mtd = host->mtd;
+	struct nand_chip *chip = mtd->priv;
+
+	info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+	info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
+	info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
+
+	return 0;
+}
+
+static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+{
+	/*
+	 * We set 0 by hard coding here, for we don't support keep_config
+	 * when there is more than one chip attached to the controller
+	 */
+	struct pxa3xx_nand_host *host = info->host[0];
+	uint32_t ndcr = nand_readl(info, NDCR);
+
+	if (ndcr & NDCR_PAGE_SZ) {
+		/* Controller's FIFO size */
+		info->chunk_size = 2048;
+		host->read_id_bytes = 4;
+	} else {
+		info->chunk_size = 512;
+		host->read_id_bytes = 2;
+	}
+
+	/* Set an initial chunk size */
+	info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+	return 0;
+}
+
+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+{
+	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+	if (info->data_buff == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+static int pxa3xx_nand_sensing(struct pxa3xx_nand_host *host)
+{
+	struct pxa3xx_nand_info *info = host->info_data;
+	struct pxa3xx_nand_platform_data *pdata = info->pdata;
+	struct mtd_info *mtd;
+	struct nand_chip *chip;
+	const struct nand_sdr_timings *timings;
+	int ret;
+
+	mtd = info->host[info->cs]->mtd;
+	chip = mtd->priv;
+
+	/* configure default flash values */
+	info->reg_ndcr = 0x0; /* enable all interrupts */
+	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+	info->reg_ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
+	info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
+
+	/* use the common timing to make a try */
+	timings = onfi_async_timing_mode_to_sdr_timings(0);
+	if (IS_ERR(timings))
+		return PTR_ERR(timings);
+
+	pxa3xx_nand_set_sdr_timing(host, timings);
+
+	chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+	ret = chip->waitfunc(mtd, chip);
+	if (ret & NAND_STATUS_FAIL)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pxa_ecc_init(struct pxa3xx_nand_info *info,
+			struct nand_ecc_ctrl *ecc,
+			int strength, int ecc_stepsize, int page_size)
+{
+	if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+		info->chunk_size = 2048;
+		info->spare_size = 40;
+		info->ecc_size = 24;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = 512;
+		ecc->strength = 1;
+
+	} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+		info->chunk_size = 512;
+		info->spare_size = 8;
+		info->ecc_size = 8;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = 512;
+		ecc->strength = 1;
+
+	/*
+	 * Required ECC: 4-bit correction per 512 bytes
+	 * Select: 16-bit correction per 2048 bytes
+	 */
+	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
+		info->ecc_bch = 1;
+		info->chunk_size = 2048;
+		info->spare_size = 32;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_2KB_bch4bit;
+		ecc->strength = 16;
+
+	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 2048;
+		info->spare_size = 32;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch4bit;
+		ecc->strength = 16;
+
+	/*
+	 * Required ECC: 8-bit correction per 512 bytes
+	 * Select: 16-bit correction per 1024 bytes
+	 */
+	} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
+		info->ecc_bch = 1;
+		info->chunk_size = 1024;
+		info->spare_size = 0;
+		info->ecc_size = 32;
+		ecc->mode = NAND_ECC_HW;
+		ecc->size = info->chunk_size;
+		ecc->layout = &ecc_layout_4KB_bch8bit;
+		ecc->strength = 16;
+	} else {
+		dev_err(&info->pdev->dev,
+			"ECC strength %d at page size %d is not supported\n",
+			strength, page_size);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int pxa3xx_nand_scan(struct mtd_info *mtd)
+{
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
+	struct pxa3xx_nand_platform_data *pdata = info->pdata;
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+	uint16_t ecc_strength, ecc_step;
+
+	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+		goto KEEP_CONFIG;
+
+	/* Set a default chunk size */
+	info->chunk_size = 512;
+
+	ret = pxa3xx_nand_sensing(host);
+	if (ret) {
+		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+			 info->cs);
+
+		return ret;
+	}
+
+KEEP_CONFIG:
+	/* Device detection must be done with ECC disabled */
+	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+		nand_writel(info, NDECCCTRL, 0x0);
+
+	if (nand_scan_ident(mtd, 1, NULL))
+		return -ENODEV;
+
+	if (!pdata->keep_config) {
+		ret = pxa3xx_nand_init_timings(host);
+		if (ret) {
+			dev_err(&info->pdev->dev,
+				"Failed to set timings: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = pxa3xx_nand_config_flash(info);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+	/*
+	 * We'll use a bad block table stored in-flash and don't
+	 * allow writing the bad block marker to the flash.
+	 */
+	chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB_BBM;
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+#endif
+
+	/*
+	 * If the page size is bigger than the FIFO size, let's check
+	 * we are given the right variant and then switch to the extended
+	 * (aka splitted) command handling,
+	 */
+	if (mtd->writesize > PAGE_CHUNK_SIZE) {
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+			chip->cmdfunc = nand_cmdfunc_extended;
+		} else {
+			dev_err(&info->pdev->dev,
+				"unsupported page size on this variant\n");
+			return -ENODEV;
+		}
+	}
+
+	if (pdata->ecc_strength && pdata->ecc_step_size) {
+		ecc_strength = pdata->ecc_strength;
+		ecc_step = pdata->ecc_step_size;
+	} else {
+		ecc_strength = chip->ecc_strength_ds;
+		ecc_step = chip->ecc_step_ds;
+	}
+
+	/* Set default ECC strength requirements on non-ONFI devices */
+	if (ecc_strength < 1 && ecc_step < 1) {
+		ecc_strength = 1;
+		ecc_step = 512;
+	}
+
+	ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+			   ecc_step, mtd->writesize);
+	if (ret)
+		return ret;
+
+	/* calculate addressing information */
+	if (mtd->writesize >= 2048)
+		host->col_addr_cycles = 2;
+	else
+		host->col_addr_cycles = 1;
+
+	/* release the initial buffer */
+	kfree(info->data_buff);
+
+	/* allocate the real data + oob buffer */
+	info->buf_size = mtd->writesize + mtd->oobsize;
+	ret = pxa3xx_nand_init_buff(info);
+	if (ret)
+		return ret;
+	info->oob_buff = info->data_buff + mtd->writesize;
+
+	if ((mtd->size >> chip->page_shift) > 65536)
+		host->row_addr_cycles = 3;
+	else
+		host->row_addr_cycles = 2;
+	return nand_scan_tail(mtd);
+}
+
+static int alloc_nand_resource(struct pxa3xx_nand_info *info)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+	struct pxa3xx_nand_host *host;
+	struct nand_chip *chip = NULL;
+	struct mtd_info *mtd;
+	int ret, cs;
+
+	pdata = info->pdata;
+	if (pdata->num_cs <= 0)
+		return -ENODEV;
+
+	info->variant = pxa3xx_nand_get_variant();
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = &nand_info[cs];
+		chip = (struct nand_chip *)info +
+			sizeof(struct pxa3xx_nand_host);
+		host = (struct pxa3xx_nand_host *)chip;
+		info->host[cs] = host;
+		host->mtd = mtd;
+		host->cs = cs;
+		host->info_data = info;
+		host->read_id_bytes = 4;
+		mtd->priv = host;
+		mtd->owner = THIS_MODULE;
+
+		chip->ecc.read_page	= pxa3xx_nand_read_page_hwecc;
+		chip->ecc.write_page	= pxa3xx_nand_write_page_hwecc;
+		chip->controller        = &info->controller;
+		chip->waitfunc		= pxa3xx_nand_waitfunc;
+		chip->select_chip	= pxa3xx_nand_select_chip;
+		chip->read_word		= pxa3xx_nand_read_word;
+		chip->read_byte		= pxa3xx_nand_read_byte;
+		chip->read_buf		= pxa3xx_nand_read_buf;
+		chip->write_buf		= pxa3xx_nand_write_buf;
+		chip->options		|= NAND_NO_SUBPAGE_WRITE;
+		chip->cmdfunc		= nand_cmdfunc;
+	}
+
+	info->mmio_base = (void __iomem *)MVEBU_NAND_BASE;
+
+	/* Allocate a buffer to allow flash detection */
+	info->buf_size = INIT_BUFFER_SIZE;
+	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+	if (info->data_buff == NULL) {
+		ret = -ENOMEM;
+		goto fail_disable_clk;
+	}
+
+	/* initialize all interrupts to be disabled */
+	disable_int(info, NDSR_MASK);
+
+	return 0;
+
+	kfree(info->data_buff);
+fail_disable_clk:
+	return ret;
+}
+
+static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->enable_arbiter = 1;
+	pdata->num_cs = 1;
+
+	info->pdata = pdata;
+
+	return 0;
+}
+
+static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
+{
+	struct pxa3xx_nand_platform_data *pdata;
+	int ret, cs, probe_success;
+
+	ret = pxa3xx_nand_probe_dt(info);
+	if (ret)
+		return ret;
+
+	pdata = info->pdata;
+
+	ret = alloc_nand_resource(info);
+	if (ret) {
+		dev_err(&pdev->dev, "alloc nand resource failed\n");
+		return ret;
+	}
+
+	probe_success = 0;
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		struct mtd_info *mtd = info->host[cs]->mtd;
+
+		/*
+		 * The mtd name matches the one used in 'mtdparts' kernel
+		 * parameter. This name cannot be changed or otherwise
+		 * user's mtd partitions configuration would get broken.
+		 */
+		mtd->name = "pxa3xx_nand-0";
+		info->cs = cs;
+		ret = pxa3xx_nand_scan(mtd);
+		if (ret) {
+			dev_info(&pdev->dev, "failed to scan nand at cs %d\n",
+				 cs);
+			continue;
+		}
+
+		if (!ret)
+			probe_success = 1;
+	}
+
+	if (!probe_success)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Main initialization routine
+ */
+void board_nand_init(void)
+{
+	struct pxa3xx_nand_info *info;
+	struct pxa3xx_nand_host *host;
+	int ret;
+
+	info = kzalloc(sizeof(*info) + (sizeof(struct mtd_info) +
+					sizeof(*host)) *
+		       CONFIG_SYS_MAX_NAND_DEVICE, GFP_KERNEL);
+	if (!info)
+		return;
+
+	/*
+	 * If CONFIG_SYS_NAND_SELF_INIT is defined, each driver is responsible
+	 * for instantiating struct nand_chip, while drivers/mtd/nand/nand.c
+	 * still provides a "struct mtd_info nand_info" instance.
+	 */
+	info->host[0]->mtd = &nand_info[0];
+
+	ret = pxa3xx_nand_probe(info);
+	if (ret)
+		return;
+
+	nand_register(0);
+}
diff --git a/drivers/mtd/nand/pxa3xx_nand.h b/drivers/mtd/nand/pxa3xx_nand.h
new file mode 100644
index 0000000000..8f24ae6d18
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_timing {
+	unsigned int	tCH;  /* Enable signal hold time */
+	unsigned int	tCS;  /* Enable signal setup time */
+	unsigned int	tWH;  /* ND_nWE high duration */
+	unsigned int	tWP;  /* ND_nWE pulse time */
+	unsigned int	tRH;  /* ND_nRE high duration */
+	unsigned int	tRP;  /* ND_nRE pulse width */
+	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
+	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
+	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_flash {
+	uint32_t	chip_id;
+	unsigned int	flash_width;    /* Width of Flash memory (DWIDTH_M) */
+	unsigned int	dfc_width;      /* Width of flash controller(DWIDTH_C) */
+	struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+};
+
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT		(2)
+struct pxa3xx_nand_platform_data {
+	/* the data flash bus is shared between the Static Memory
+	 * Controller and the Data Flash Controller,  the arbiter
+	 * controls the ownership of the bus
+	 */
+	int	enable_arbiter;
+
+	/* allow platform code to keep OBM/bootloader defined NFC config */
+	int	keep_config;
+
+	/* indicate how many chip selects will be used */
+	int	num_cs;
+
+	/* use an flash-based bad block table */
+	bool	flash_bbt;
+
+	/* requested ECC strength and ECC step size */
+	int ecc_strength, ecc_step_size;
+
+	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
+	unsigned int				nr_parts[NUM_CHIP_SELECT];
+
+	const struct pxa3xx_nand_flash		*flash;
+	size_t					num_flash;
+};
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index eec2ba933f..f612e72d88 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -33,6 +33,7 @@
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SF
@@ -110,6 +111,10 @@
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_E1000	/* enable Intel E1000 support for testing */
 
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h
index a7ddd5fc88..a86f2162aa 100644
--- a/include/fsl_ifc.h
+++ b/include/fsl_ifc.h
@@ -19,10 +19,12 @@
 #define ifc_in32(a)       in_le32(a)
 #define ifc_out32(a, v)   out_le32(a, v)
 #define ifc_in16(a)       in_le16(a)
+#define ifc_out16(a, v)   out_le16(a, v)
 #elif defined(CONFIG_SYS_FSL_IFC_BE)
 #define ifc_in32(a)       in_be32(a)
 #define ifc_out32(a, v)   out_be32(a, v)
 #define ifc_in16(a)       in_be16(a)
+#define ifc_out16(a, v)   out_be16(a, v)
 #else
 #error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined
 #endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 552d4d623f..bc4d9bf8f9 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -101,7 +101,7 @@ struct mtd_oob_ops {
 #ifdef CONFIG_SYS_NAND_MAX_ECCPOS
 #define MTD_MAX_ECCPOS_ENTRIES_LARGE	CONFIG_SYS_NAND_MAX_ECCPOS
 #else
-#define MTD_MAX_ECCPOS_ENTRIES_LARGE	640
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE	680
 #endif
 
 /*
@@ -238,6 +238,7 @@ struct mtd_info {
 	int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
 	int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
 	int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
 	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
 #ifndef __UBOOT__
@@ -328,6 +329,7 @@ static inline void mtd_sync(struct mtd_info *mtd)
 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs);
 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index bc927ecc59..23072fdfc3 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -16,20 +16,12 @@
 #ifndef __LINUX_MTD_NAND_H
 #define __LINUX_MTD_NAND_H
 
-#ifndef __UBOOT__
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/bbm.h>
-#else
 #include "config.h"
 
 #include "linux/compat.h"
 #include "linux/mtd/mtd.h"
 #include "linux/mtd/flashchip.h"
 #include "linux/mtd/bbm.h"
-#endif
 
 struct mtd_info;
 struct nand_flash_dev;
@@ -49,24 +41,13 @@ extern void nand_release(struct mtd_info *mtd);
 /* Internal helper for board drivers which need to override command function */
 extern void nand_wait_ready(struct mtd_info *mtd);
 
-#ifndef __UBOOT__
-/* locks all blocks present in the device */
-extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* unlocks specified locked blocks */
-extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS		8
-#else
 /*
  * This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
-#define NAND_MAX_OOBSIZE       744
-#define NAND_MAX_PAGESIZE      8192
-#endif
+#define NAND_MAX_OOBSIZE       1216
+#define NAND_MAX_PAGESIZE      16384
 
 /*
  * Constants for hardware specific CLE/ALE/NCE function
@@ -473,9 +454,6 @@ struct nand_jedec_params {
 struct nand_hw_control {
 	spinlock_t lock;
 	struct nand_chip *active;
-#ifndef __UBOOT__
-	wait_queue_head_t wq;
-#endif
 };
 
 /**
@@ -494,8 +472,21 @@ struct nand_hw_control {
  *		be provided if an hardware ECC is available
  * @calculate:	function for ECC calculation or readback from ECC hardware
  * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
- * @read_page_raw:	function to read a raw page without ECC
- * @write_page_raw:	function to write a raw page without ECC
+ * @read_page_raw:	function to read a raw page without ECC. This function
+ *			should hide the specific layout used by the ECC
+ *			controller and always return contiguous in-band and
+ *			out-of-band data even if they're not stored
+ *			contiguously on the NAND chip (e.g.
+ *			NAND_ECC_HW_SYNDROME interleaves in-band and
+ *			out-of-band data).
+ * @write_page_raw:	function to write a raw page without ECC. This function
+ *			should hide the specific layout used by the ECC
+ *			controller and consider the passed data as contiguous
+ *			in-band and out-of-band data. ECC controller is
+ *			responsible for doing the appropriate transformations
+ *			to adapt to its specific layout (e.g.
+ *			NAND_ECC_HW_SYNDROME interleaves in-band and
+ *			out-of-band data).
  * @read_page:	function to read a page according to the ECC generator
  *		requirements; returns maximum number of bitflips corrected in
  *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
@@ -557,16 +548,10 @@ struct nand_ecc_ctrl {
  * consecutive order.
  */
 struct nand_buffers {
-#ifndef __UBOOT__
-	uint8_t *ecccalc;
-	uint8_t *ecccode;
-	uint8_t *databuf;
-#else
 	uint8_t	ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
 	uint8_t	ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
 	uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE,
 			      ARCH_DMA_MINALIGN)];
-#endif
 };
 
 /**
@@ -603,8 +588,7 @@ struct nand_buffers {
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
- * @erase_cmd:		[INTERN] erase command write function, selectable due
- *			to AND support.
+ * @erase:		[REPLACEABLE] erase function
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
@@ -634,6 +618,11 @@ struct nand_buffers {
  * @ecc_step_ds:	[INTERN] ECC step required by the @ecc_strength_ds,
  *                      also from the datasheet. It is the recommended ECC step
  *			size, if known; if unknown, set to zero.
+ * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
+ *			      either deduced from the datasheet if the NAND
+ *			      chip is not ONFI compliant or set to 0 if it is
+ *			      (an ONFI chip is always configured in mode 0
+ *			      after a NAND reset)
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
@@ -688,7 +677,7 @@ struct nand_chip {
 	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
 			int page_addr);
 	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
-	void (*erase_cmd)(struct mtd_info *mtd, int page);
+	int (*erase)(struct mtd_info *mtd, int page);
 	int (*scan_bbt)(struct mtd_info *mtd);
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);
@@ -718,6 +707,7 @@ struct nand_chip {
 	uint8_t bits_per_cell;
 	uint16_t ecc_strength_ds;
 	uint16_t ecc_step_ds;
+	int onfi_timing_mode_default;
 	int badblockpos;
 	int badblockbits;
 
@@ -734,9 +724,7 @@ struct nand_chip {
 
 	uint8_t *oob_poi;
 	struct nand_hw_control *controller;
-#ifdef __UBOOT__
 	struct nand_ecclayout *ecclayout;
-#endif
 
 	struct nand_ecc_ctrl ecc;
 	struct nand_buffers *buffers;
@@ -767,6 +755,7 @@ struct nand_chip {
 #define NAND_MFR_EON		0x92
 #define NAND_MFR_SANDISK	0x45
 #define NAND_MFR_INTEL		0x89
+#define NAND_MFR_ATO		0x9b
 
 /* The maximum expected count of bytes in the NAND ID sequence */
 #define NAND_MAX_ID_LEN 8
@@ -816,12 +805,17 @@ struct nand_chip {
  * @options: stores various chip bit options
  * @id_len: The valid length of the @id.
  * @oobsize: OOB size
+ * @ecc: ECC correctability and step information from the datasheet.
  * @ecc.strength_ds: The ECC correctability from the datasheet, same as the
  *                   @ecc_strength_ds in nand_chip{}.
  * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
  *               @ecc_step_ds in nand_chip{}, also from the datasheet.
  *               For example, the "4bit ECC for each 512Byte" can be set with
  *               NAND_ECC_INFO(4, 512).
+ * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
+ *			      reset. Should be deduced from timings described
+ *			      in the datasheet.
+ *
  */
 struct nand_flash_dev {
 	char *name;
@@ -842,6 +836,7 @@ struct nand_flash_dev {
 		uint16_t strength_ds;
 		uint16_t step_ds;
 	} ecc;
+	int onfi_timing_mode_default;
 };
 
 /**
@@ -860,19 +855,18 @@ extern struct nand_manufacturers nand_manuf_ids[];
 extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_default_bbt(struct mtd_info *mtd);
 extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
 extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			   int allowbbt);
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, uint8_t *buf);
 
-#ifdef __UBOOT__
 /*
 * Constants for oob configuration
 */
 #define NAND_SMALL_BADBLOCK_POS		5
 #define NAND_LARGE_BADBLOCK_POS		0
-#endif
 
 /**
  * struct platform_nand_chip - chip level device structure
@@ -1008,12 +1002,62 @@ static inline int jedec_feature(struct nand_chip *chip)
 		: 0;
 }
 
-#ifdef __UBOOT__
 /* Standard NAND functions from nand_base.c */
 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
 void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
 void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
 void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
 uint8_t nand_read_byte(struct mtd_info *mtd);
-#endif
+
+/*
+ * struct nand_sdr_timings - SDR NAND chip timings
+ *
+ * This struct defines the timing requirements of a SDR NAND chip.
+ * These informations can be found in every NAND datasheets and the timings
+ * meaning are described in the ONFI specifications:
+ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
+ * Parameters)
+ *
+ * All these timings are expressed in picoseconds.
+ */
+
+struct nand_sdr_timings {
+	u32 tALH_min;
+	u32 tADL_min;
+	u32 tALS_min;
+	u32 tAR_min;
+	u32 tCEA_max;
+	u32 tCEH_min;
+	u32 tCH_min;
+	u32 tCHZ_max;
+	u32 tCLH_min;
+	u32 tCLR_min;
+	u32 tCLS_min;
+	u32 tCOH_min;
+	u32 tCS_min;
+	u32 tDH_min;
+	u32 tDS_min;
+	u32 tFEAT_max;
+	u32 tIR_min;
+	u32 tITC_max;
+	u32 tRC_min;
+	u32 tREA_max;
+	u32 tREH_min;
+	u32 tRHOH_min;
+	u32 tRHW_min;
+	u32 tRHZ_max;
+	u32 tRLOH_min;
+	u32 tRP_min;
+	u32 tRR_min;
+	u64 tRST_max;
+	u32 tWB_max;
+	u32 tWC_min;
+	u32 tWH_min;
+	u32 tWHR_min;
+	u32 tWP_min;
+	u32 tWW_min;
+};
+
+/* get timing characteristics from ONFI timing mode. */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
 #endif /* __LINUX_MTD_NAND_H */