diff options
author | Matthias Fuchs <matthias.fuchs@esd-electronics.com> | 2007-12-27 17:03:46 +0100 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2007-12-27 19:35:37 +0100 |
commit | b568fd25574181a3b12ae3d66b2913903442cb83 (patch) | |
tree | 154528948869a02854cd654fd7c621741a8113ac | |
parent | c591dffe0cbacd896ccbad06011fe6d6afa080da (diff) |
Remove CPCI440 board
This board never left prototyping state and it
became a millstone round my neck. So remove it.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-rw-r--r-- | MAINTAINERS | 1 | ||||
-rwxr-xr-x | MAKEALL | 1 | ||||
-rw-r--r-- | Makefile | 3 | ||||
-rw-r--r-- | board/esd/cpci440/Makefile | 54 | ||||
-rw-r--r-- | board/esd/cpci440/config.mk | 45 | ||||
-rw-r--r-- | board/esd/cpci440/cpci440.c | 152 | ||||
-rw-r--r-- | board/esd/cpci440/init.S | 94 | ||||
-rw-r--r-- | board/esd/cpci440/strataflash.c | 755 | ||||
-rw-r--r-- | board/esd/cpci440/u-boot.lds | 159 | ||||
-rw-r--r-- | include/configs/CPCI440.h | 287 |
10 files changed, 0 insertions, 1551 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0238d2e816..6e3c2ef499 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -146,7 +146,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> CPCI4052 PPC405GP CPCI405AB PPC405GP CPCI405DT PPC405GP - CPCI440 PPC440GP CPCIISER4 PPC405GP DASA_SIM IOP480 (PPC401) DP405 PPC405EP @@ -168,7 +168,6 @@ LIST_4xx=" \ CPCI4052 \ CPCI405AB \ CPCI405DT \ - CPCI440 \ CPCIISER4 \ CRAYL1 \ csb272 \ @@ -1160,9 +1160,6 @@ CPCI405AB_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk -CPCI440_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd - CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd diff --git a/board/esd/cpci440/Makefile b/board/esd/cpci440/Makefile deleted file mode 100644 index d13d31c974..0000000000 --- a/board/esd/cpci440/Makefile +++ /dev/null @@ -1,54 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - -LIB = $(obj)lib$(BOARD).a - -COBJS = $(BOARD).o strataflash.o ../common/misc.o -SOBJS = init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/esd/cpci440/config.mk b/board/esd/cpci440/config.mk deleted file mode 100644 index 8e5f63fe48..0000000000 --- a/board/esd/cpci440/config.mk +++ /dev/null @@ -1,45 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# esd ADCIOP boards -# - -#TEXT_BASE = 0xFFFE0000 - -ifeq ($(ramsym),1) -TEXT_BASE = 0x07FD0000 -else -TEXT_BASE = 0xFFFC0000 -#TEXT_BASE = 0x01fc0000 -endif - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 -endif diff --git a/board/esd/cpci440/cpci440.c b/board/esd/cpci440/cpci440.c deleted file mode 100644 index caa6d5591f..0000000000 --- a/board/esd/cpci440/cpci440.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * (C) Copyright 2002 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <asm/processor.h> - - -extern void lxt971_no_sleep(void); - - -long int fixed_sdram( void ); - -int board_early_init_f (void) -{ - uint reg; - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtdcr( ebccfga, xbcfg ); - reg = mfdcr( ebccfgd ); - mtdcr( ebccfgd, reg | 0x04000000 ); /* Set ATC */ - - mtebc( pb0ap, 0x92015480 ); /* FLASH/SRAM */ - mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */ - /* test-only: other regs still missing... */ - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr( uic0sr, 0xffffffff ); /* clear all */ - mtdcr( uic0er, 0x00000000 ); /* disable all */ - mtdcr( uic0cr, 0x00000009 ); /* SMI & UIC1 crit are critical */ - mtdcr( uic0pr, 0xfffffe13 ); /* per ref-board manual */ - mtdcr( uic0tr, 0x01c00008 ); /* per ref-board manual */ - mtdcr( uic0vr, 0x00000001 ); /* int31 highest, base=0x000 */ - mtdcr( uic0sr, 0xffffffff ); /* clear all */ - - mtdcr( uic1sr, 0xffffffff ); /* clear all */ - mtdcr( uic1er, 0x00000000 ); /* disable all */ - mtdcr( uic1cr, 0x00000000 ); /* all non-critical */ - mtdcr( uic1pr, 0xffffe0ff ); /* per ref-board manual */ - mtdcr( uic1tr, 0x00ffc000 ); /* per ref-board manual */ - mtdcr( uic1vr, 0x00000001 ); /* int31 highest, base=0x000 */ - mtdcr( uic1sr, 0xffffffff ); /* clear all */ - - return 0; -} - - -int checkboard (void) -{ - sys_info_t sysinfo; - get_sys_info(&sysinfo); - - printf("Board: esd CPCI-440\n"); - printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000); - printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000); - printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000); - printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000); - printf("\tEBC: %lu MHz\n", sysinfo.freqEBC/1000000); - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); - - return (0); -} - - -long int initdram (int board_type) -{ - long dram_size = 0; - - dram_size = fixed_sdram(); - return dram_size; -} - - -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - * - * Assumes: 64 MB, non-ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -long int fixed_sdram( void ) -{ - uint reg; - -#if 1 /* test-only */ - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram( mem_uabba, 0x00000000 ); /* ubba=0 (default) */ - mtsdram( mem_slio, 0x00000000 ); /* rdre=0 wrre=0 rarw=0 */ - mtsdram( mem_devopt,0x00000000 ); /* dll=0 ds=0 (normal) */ - mtsdram( mem_wddctr,0x40000000 ); /* wrcp=0 dcd=0 */ - mtsdram( mem_clktr, 0x40000000 ); /* clkp=1 (90 deg wr) dcdt=0 */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/ - mtsdram( mem_tr0, 0x410a4012 );/* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ - /* RA=10 RD=3 */ - mtsdram( mem_tr1, 0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram( mem_rtr, 0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM */ - udelay( 400 ); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit */ - for(;;) - { - mfsdram( mem_mcsts, reg ); - if( reg & 0x80000000 ) - break; - } - - return( 64 * 1024 * 1024 ); /* 64 MB */ -#else - return( 32 * 1024 * 1024 ); /* 64 MB */ -#endif -} diff --git a/board/esd/cpci440/init.S b/board/esd/cpci440/init.S deleted file mode 100644 index 82f37fd996..0000000000 --- a/board/esd/cpci440/init.S +++ /dev/null @@ -1,94 +0,0 @@ -/* -* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -#include <ppc_asm.tmpl> -#include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X ) - tlbtab_end diff --git a/board/esd/cpci440/strataflash.c b/board/esd/cpci440/strataflash.c deleted file mode 100644 index 2f055c20d5..0000000000 --- a/board/esd/cpci440/strataflash.c +++ /dev/null @@ -1,755 +0,0 @@ -/* - * (C) Copyright 2002 - * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> - -#undef DEBUG_FLASH -/* - * This file implements a Common Flash Interface (CFI) driver for U-Boot. - * The width of the port and the width of the chips are determined at initialization. - * These widths are used to calculate the address for access CFI data structures. - * It has been tested on an Intel Strataflash implementation. - * - * References - * JEDEC Standard JESD68 - Common Flash Interface (CFI) - * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes - * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets - * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet - * - * TODO - * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available - * Add support for other command sets Use the PRI and ALT to determine command set - * Verify erase and program timeouts. - */ - -#define FLASH_CMD_CFI 0x98 -#define FLASH_CMD_READ_ID 0x90 -#define FLASH_CMD_RESET 0xff -#define FLASH_CMD_BLOCK_ERASE 0x20 -#define FLASH_CMD_ERASE_CONFIRM 0xD0 -#define FLASH_CMD_WRITE 0x40 -#define FLASH_CMD_PROTECT 0x60 -#define FLASH_CMD_PROTECT_SET 0x01 -#define FLASH_CMD_PROTECT_CLEAR 0xD0 -#define FLASH_CMD_CLEAR_STATUS 0x50 -#define FLASH_CMD_WRITE_TO_BUFFER 0xE8 -#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0 - -#define FLASH_STATUS_DONE 0x80 -#define FLASH_STATUS_ESS 0x40 -#define FLASH_STATUS_ECLBS 0x20 -#define FLASH_STATUS_PSLBS 0x10 -#define FLASH_STATUS_VPENS 0x08 -#define FLASH_STATUS_PSS 0x04 -#define FLASH_STATUS_DPS 0x02 -#define FLASH_STATUS_R 0x01 -#define FLASH_STATUS_PROTECT 0x01 - -#define FLASH_OFFSET_CFI 0x55 -#define FLASH_OFFSET_CFI_RESP 0x10 -#define FLASH_OFFSET_WTOUT 0x1F -#define FLASH_OFFSET_WBTOUT 0x20 -#define FLASH_OFFSET_ETOUT 0x21 -#define FLASH_OFFSET_CETOUT 0x22 -#define FLASH_OFFSET_WMAX_TOUT 0x23 -#define FLASH_OFFSET_WBMAX_TOUT 0x24 -#define FLASH_OFFSET_EMAX_TOUT 0x25 -#define FLASH_OFFSET_CEMAX_TOUT 0x26 -#define FLASH_OFFSET_SIZE 0x27 -#define FLASH_OFFSET_INTERFACE 0x28 -#define FLASH_OFFSET_BUFFER_SIZE 0x2A -#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C -#define FLASH_OFFSET_ERASE_REGIONS 0x2D -#define FLASH_OFFSET_PROTECT 0x02 -#define FLASH_OFFSET_USER_PROTECTION 0x85 -#define FLASH_OFFSET_INTEL_PROTECTION 0x81 - - -#define FLASH_MAN_CFI 0x01000000 - - -typedef union { - unsigned char c; - unsigned short w; - unsigned long l; -} cfiword_t; - -typedef union { - unsigned char * cp; - unsigned short *wp; - unsigned long *lp; -} cfiptr_t; - -#define NUM_ERASE_REGIONS 4 - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - - -/*----------------------------------------------------------------------- - * Functions - */ - - -static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); -static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); -static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd); -static int flash_detect_cfi(flash_info_t * info); -static ulong flash_get_size (ulong base, int banknum); -static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword); -static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt); -#ifdef CFG_FLASH_USE_BUFFER_WRITE -static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len); -#endif -/*----------------------------------------------------------------------- - * create an address based on the offset and the port width - */ -inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset) -{ - return ((uchar *)(info->start[sect] + (offset * info->portwidth))); -} -/*----------------------------------------------------------------------- - * read a character at a port width address - */ -inline uchar flash_read_uchar(flash_info_t * info, uchar offset) -{ - uchar *cp; - cp = flash_make_addr(info, 0, offset); - return (cp[info->portwidth - 1]); -} - -/*----------------------------------------------------------------------- - * read a short word by swapping for ppc format. - */ -ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset) -{ - uchar * addr; - - addr = flash_make_addr(info, sect, offset); - return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]); - -} - -/*----------------------------------------------------------------------- - * read a long word by picking the least significant byte of each maiximum - * port size word. Swap for ppc format. - */ -ulong flash_read_long(flash_info_t * info, int sect, uchar offset) -{ - uchar * addr; - - addr = flash_make_addr(info, sect, offset); - return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) | - (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]); - -} - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size; - int i; - unsigned long address; - - - /* The flash is positioned back to back, with the demultiplexing of the chip - * based on the A24 address line. - * - */ - - address = CFG_FLASH_BASE; - size = 0; - - /* Init: no FLASHes known */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - size += flash_info[i].size = flash_get_size(address, i); - address += CFG_FLASH_INCREMENT; - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i, - flash_info[0].size, flash_info[i].size<<20); - } - } - -#if 0 /* test-only */ - /* Monitor protection ON by default */ -#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE) - for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++) - (void)flash_real_protect(&flash_info[0], i, 1); -#endif -#endif - - return (size); -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int rcode = 0; - int prot; - int sect; - - if( info->flash_id != FLASH_MAN_CFI) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - if ((s_first < 0) || (s_first > s_last)) { - printf ("- no sectors to erase\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); - flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); - - if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { - rcode = 1; - } else - printf("."); - } - } - printf (" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id != FLASH_MAN_CFI) { - printf ("missing or unknown FLASH type\n"); - return; - } - - printf("CFI conformant FLASH (%d x %d)", - (info->portwidth << 3 ), (info->chipwidth << 3 )); - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", - info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n"); - printf (" %08lX%5s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong wp; - ulong cp; - int aln; - cfiword_t cword; - int i, rc; - - /* get lower aligned address */ - wp = (addr & ~(info->portwidth - 1)); - - /* handle unaligned start */ - if((aln = addr - wp) != 0) { - cword.l = 0; - cp = wp; - for(i=0;i<aln; ++i, ++cp) - flash_add_byte(info, &cword, (*(uchar *)cp)); - - for(; (i< info->portwidth) && (cnt > 0) ; i++) { - flash_add_byte(info, &cword, *src++); - cnt--; - cp++; - } - for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp) - flash_add_byte(info, &cword, (*(uchar *)cp)); - if((rc = flash_write_cfiword(info, wp, cword)) != 0) - return rc; - wp = cp; - } - -#ifdef CFG_FLASH_USE_BUFFER_WRITE - while(cnt >= info->portwidth) { - i = info->buffer_size > cnt? cnt: info->buffer_size; - if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK) - return rc; - wp += i; - src += i; - cnt -=i; - } -#else - /* handle the aligned part */ - while(cnt >= info->portwidth) { - cword.l = 0; - for(i = 0; i < info->portwidth; i++) { - flash_add_byte(info, &cword, *src++); - } - if((rc = flash_write_cfiword(info, wp, cword)) != 0) - return rc; - wp += info->portwidth; - cnt -= info->portwidth; - } -#endif /* CFG_FLASH_USE_BUFFER_WRITE */ - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - cword.l = 0; - for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) { - flash_add_byte(info, &cword, *src++); - --cnt; - } - for (; i<info->portwidth; ++i, ++cp) { - flash_add_byte(info, & cword, (*(uchar *)cp)); - } - - return flash_write_cfiword(info, wp, cword); -} - -/*----------------------------------------------------------------------- - */ -int flash_real_protect(flash_info_t *info, long sector, int prot) -{ - int retcode = 0; - - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT); - if(prot) - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET); - else - flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); - - if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, - prot?"protect":"unprotect")) == 0) { - - info->protect[sector] = prot; - /* Intel's unprotect unprotects all locking */ - if(prot == 0) { - int i; - for(i = 0 ; i<info->sector_count; i++) { - if(info->protect[i]) - flash_real_protect(info, i, 1); - } - } - } - - return retcode; -} -/*----------------------------------------------------------------------- - * wait for XSR.7 to be set. Time out with an error if it does not. - * This routine does not set the flash to read-array mode. - */ -static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) -{ - ulong start; - - /* Wait for command completion */ - start = get_timer (0); - while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { - if (get_timer(start) > info->erase_blk_tout) { - printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]); - flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); - return ERR_TIMOUT; - } - } - return ERR_OK; -} -/*----------------------------------------------------------------------- - * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check. - * This routine sets the flash to read-array mode. - */ -static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) -{ - int retcode; - retcode = flash_status_check(info, sector, tout, prompt); - if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) { - retcode = ERR_INVAL; - printf("Flash %s error at address %lx\n", prompt,info->start[sector]); - if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){ - printf("Command Sequence Error.\n"); - } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ - printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; - } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { - printf("Locking Error\n"); - } - if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){ - printf("Block locked.\n"); - retcode = ERR_PROTECTED; - } - if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS)) - printf("Vpp Low Error.\n"); - } - flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); - return retcode; -} -/*----------------------------------------------------------------------- - */ -static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c) -{ - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cword->c = c; - break; - case FLASH_CFI_16BIT: - cword->w = (cword->w << 8) | c; - break; - case FLASH_CFI_32BIT: - cword->l = (cword->l << 8) | c; - } -} - - -/*----------------------------------------------------------------------- - * make a proper sized command based on the port and chip widths - */ -static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf) -{ - int i; - uchar *cp = (uchar *)cmdbuf; - for(i=0; i< info->portwidth; i++) - *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; -} - -/* - * Write a proper sized command to the correct address - */ -static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd) -{ - - volatile cfiptr_t addr; - cfiword_t cword; - addr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - *addr.cp = cword.c; - break; - case FLASH_CFI_16BIT: - *addr.wp = cword.w; - break; - case FLASH_CFI_32BIT: - *addr.lp = cword.l; - break; - } -} - -/*----------------------------------------------------------------------- - */ -static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd) -{ - cfiptr_t cptr; - cfiword_t cword; - int retval; - cptr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - retval = (cptr.cp[0] == cword.c); - break; - case FLASH_CFI_16BIT: - retval = (cptr.wp[0] == cword.w); - break; - case FLASH_CFI_32BIT: - retval = (cptr.lp[0] == cword.l); - break; - default: - retval = 0; - break; - } - return retval; -} -/*----------------------------------------------------------------------- - */ -static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd) -{ - cfiptr_t cptr; - cfiword_t cword; - int retval; - cptr.cp = flash_make_addr(info, sect, offset); - flash_make_cmd(info, cmd, &cword); - switch(info->portwidth) { - case FLASH_CFI_8BIT: - retval = ((cptr.cp[0] & cword.c) == cword.c); - break; - case FLASH_CFI_16BIT: - retval = ((cptr.wp[0] & cword.w) == cword.w); - break; - case FLASH_CFI_32BIT: - retval = ((cptr.lp[0] & cword.l) == cword.l); - break; - default: - retval = 0; - break; - } - return retval; -} - -/*----------------------------------------------------------------------- - * detect if flash is compatible with the Common Flash Interface (CFI) - * http://www.jedec.org/download/search/jesd68.pdf - * - */ -static int flash_detect_cfi(flash_info_t * info) -{ - - for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT; - info->portwidth <<= 1) { - for(info->chipwidth =FLASH_CFI_BY8; - info->chipwidth <= info->portwidth; - info->chipwidth <<= 1) { - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); - if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && - flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) - return 1; - } - } - return 0; -} -/* - * The following code cannot be run from FLASH! - * - */ -static ulong flash_get_size (ulong base, int banknum) -{ - flash_info_t * info = &flash_info[banknum]; - int i, j; - int sect_cnt; - unsigned long sector; - unsigned long tmp; - int size_ratio; - uchar num_erase_regions; - int erase_region_size; - int erase_region_count; - - info->start[0] = base; - - if(flash_detect_cfi(info)){ -#ifdef DEBUG_FLASH - printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */ -#endif - size_ratio = info->portwidth / info->chipwidth; - num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS); -#ifdef DEBUG_FLASH - printf("found %d erase regions\n", num_erase_regions); -#endif - sect_cnt = 0; - sector = base; - for(i = 0 ; i < num_erase_regions; i++) { - if(i > NUM_ERASE_REGIONS) { - printf("%d erase regions found, only %d used\n", - num_erase_regions, NUM_ERASE_REGIONS); - break; - } - tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS); - erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128; - tmp >>= 16; - erase_region_count = (tmp & 0xffff) +1; - for(j = 0; j< erase_region_count; j++) { - info->start[sect_cnt] = sector; - sector += (erase_region_size * size_ratio); - info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); - sect_cnt++; - } - } - - info->sector_count = sect_cnt; - /* multiply the size by the number of chips */ - info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio; - info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE)); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT); - info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT))); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT); - info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT))); - tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT); - info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000; - info->flash_id = FLASH_MAN_CFI; - } - - flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); - return(info->size); -} - - -/*----------------------------------------------------------------------- - */ -static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) -{ - - cfiptr_t ctladdr; - cfiptr_t cptr; - int flag; - - ctladdr.cp = flash_make_addr(info, 0, 0); - cptr.cp = (uchar *)dest; - - - /* Check if Flash is (sufficiently) erased */ - switch(info->portwidth) { - case FLASH_CFI_8BIT: - flag = ((cptr.cp[0] & cword.c) == cword.c); - break; - case FLASH_CFI_16BIT: - flag = ((cptr.wp[0] & cword.w) == cword.w); - break; - case FLASH_CFI_32BIT: - flag = ((cptr.lp[0] & cword.l) == cword.l); - break; - default: - return 2; - } - if(!flag) - return 2; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE); - - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cptr.cp[0] = cword.c; - break; - case FLASH_CFI_16BIT: - cptr.wp[0] = cword.w; - break; - case FLASH_CFI_32BIT: - cptr.lp[0] = cword.l; - break; - } - - /* re-enable interrupts if necessary */ - if(flag) - enable_interrupts(); - - return flash_full_status_check(info, 0, info->write_tout, "write"); -} - -#ifdef CFG_FLASH_USE_BUFFER_WRITE - -/* loop through the sectors from the highest address - * when the passed address is greater or equal to the sector address - * we have a match - */ -static int find_sector(flash_info_t *info, ulong addr) -{ - int sector; - for(sector = info->sector_count - 1; sector >= 0; sector--) { - if(addr >= info->start[sector]) - break; - } - return sector; -} - -static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) -{ - - int sector; - int cnt; - int retcode; - volatile cfiptr_t src; - volatile cfiptr_t dst; - - src.cp = cp; - dst.cp = (uchar *)dest; - sector = find_sector(info, dest); - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); - if((retcode = flash_status_check(info, sector, info->buffer_write_tout, - "write to buffer")) == ERR_OK) { - switch(info->portwidth) { - case FLASH_CFI_8BIT: - cnt = len; - break; - case FLASH_CFI_16BIT: - cnt = len >> 1; - break; - case FLASH_CFI_32BIT: - cnt = len >> 2; - break; - default: - return ERR_INVAL; - break; - } - flash_write_cmd(info, sector, 0, (uchar)cnt-1); - while(cnt-- > 0) { - switch(info->portwidth) { - case FLASH_CFI_8BIT: - *dst.cp++ = *src.cp++; - break; - case FLASH_CFI_16BIT: - *dst.wp++ = *src.wp++; - break; - case FLASH_CFI_32BIT: - *dst.lp++ = *src.lp++; - break; - default: - return ERR_INVAL; - break; - } - } - flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); - retcode = flash_full_status_check(info, sector, info->buffer_write_tout, - "buffer write"); - } - flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); - return retcode; -} -#endif /* CFG_USE_FLASH_BUFFER_WRITE */ diff --git a/board/esd/cpci440/u-boot.lds b/board/esd/cpci440/u-boot.lds deleted file mode 100644 index b1b4ad2a97..0000000000 --- a/board/esd/cpci440/u-boot.lds +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : -/* .resetvec 0x01FFFFFC :*/ - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : -/* .bootpg 0x01FFF000 :*/ - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/esd/cpci440/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ - - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h deleted file mode 100644 index eb47cd7ff8..0000000000 --- a/include/configs/CPCI440.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * (C) Copyright 2002 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************************************ - * board/config_CPCI440.h - configuration for esd CPCI-440 board - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_CPCI440 1 /* Board is ebony */ -#define CONFIG_440GP 1 /* Specifc GP support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#undef CFG_DRAM_TEST /* Disable-takes long time! */ -#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */ -#if 1 -#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ -#else -#define CFG_MONITOR_BASE 0x01fc0000 /* start of monitor */ -#endif -#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ -#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ - -#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000) -#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ - -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#undef CFG_EXT_SERIAL_CLOCK /* (1843200 * 6) / * Ext clk @ 11.059 MHz */ -#define CONFIG_BAUDRATE 9600 - -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#if 1 /* test-only */ - -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#undef CFG_FLASH_BASE -#define CFG_FLASH_BASE 0xFF800000 /* test-only...*/ - -#else /* test-only */ - -#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ -#define CFG_MAX_FLASH_SECT 32 /* sectors per device */ - -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#endif - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#if 0 /* test-only */ -#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ -#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ -#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ - -#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */ -#define CFG_ENV_ADDR \ - (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) -#else - -#if 0 /* test-only */ -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CFG_ENV_OFFSET 0x010 /* environment starts at the beginning of the EEPROM */ -#define CFG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/ - /* total size of a CAT24WC16 is 2048 bytes */ -#else -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC16) for environment - */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F - -#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CFG_EEPROM_PAGE_WRITE_ENABLE - -#endif - -#undef CONFIG_BOOTARGS -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#define CONFIG_BAUDRATE 9600 - -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_SPD_EEPROM /* don't use SPD EEPROM for setup */ - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#if 0 /* test-only */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F -#endif - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#if 0 -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ - -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ - -#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ -#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ -#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* Configuration Port location */ -#define CONFIG_PORT_ADDR 0xF0000500 - -/*----------------------------------------------------------------------- - * Definitions for Serial Presence Detect EEPROM address - * (to get SDRAM settings) - */ -#define SPD_EEPROM_ADDRESS 0x50 - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif -#endif /* __CONFIG_H */ |