Merge git://git.denx.de/u-boot-marvell

- Move Armada XP / 38x PCIe driver to DM_PCI from me
- Move Armada XP / 38x LCD driver to DM_VIDEO from me
- Add uDPU board (Armada-3720) from Vladimir

[trini: Fix warning in pci-uclass.c by removing ret from
	pci_uclass_child_post_bind as it no longer calls functions with
        a return code to catch.]
Signed-off-by: Tom Rini <trini@konsulko.com>II

36 files changed, 928 insertions, 416 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 876c032d11..ca50623480 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-3720-db.dtb			\
 	armada-3720-espressobin.dtb		\
 	armada-3720-turris-mox.dtb		\
+	armada-3720-uDPU.dts			\
 	armada-375-db.dtb			\
 	armada-388-clearfog.dtb			\
 	armada-388-gp.dtb			\
diff --git a/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi b/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi
new file mode 100644
index 0000000000..ef178bdc86
--- /dev/null
+++ b/arch/arm/dts/armada-3720-uDPU-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&sdhci1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
new file mode 100644
index 0000000000..683dac2a7c
--- /dev/null
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2018 Methode
+ * Copyright (C) 2018 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include "armada-37xx.dtsi"
+#include "armada-3720-uDPU-u-boot.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000";
+	};
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		spi0 = &spi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	mdio: mdio@32004 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			 reg = <0>;
+		};
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	scsi: scsi {
+		compatible = "marvell,mvebu-scsi";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		max-id = <1>;
+		max-lun = <1>;
+		status = "okay";
+	};
+
+	i2c1: i2c@11080 {
+		compatible = "marvell,armada-3700-i2c", "simple-bus";
+		reg = <0x0 0x11080 0x0 0x80>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		status = "okay";
+	};
+
+	uart1: serial@12200 {
+		compatible = "marvell,armada-3700-uart-ext";
+		reg = <0x0 0x12200 0x0 0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_pins>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
+	vcc_sd_reg0: regulator@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		states = <1800000 0x1
+			3300000 0x0>;
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		sfp,ethernet = <&eth1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&comphy {
+	phy0 {
+		phy-type = <PHY_TYPE_SGMII1>;
+		phy-speed = <PHY_SPEED_1_25G>;
+	};
+        phy1 {
+                phy-type = <PHY_TYPE_SGMII0>;
+                phy-speed = <PHY_SPEED_1_25G>;
+        };
+
+        phy2 {
+                phy-type = <PHY_TYPE_USB3_HOST1>;
+                phy-speed = <PHY_SPEED_5G>;
+        };
+};
+
+&eth0 {
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&ethphy0>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&ethphy1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c1_pins>;
+        status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q1024a","n25q512a";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0 0x400000>;
+		};
+	};
+};
+
+&sdhci1 {
+	non-removable;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	bus-width = <4>;
+	vqmmc-supply = <&vcc_sd_reg0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/armada-375.dtsi b/arch/arm/dts/armada-375.dtsi
index 249c41c757..62a548a55f 100644
--- a/arch/arm/dts/armada-375.dtsi
+++ b/arch/arm/dts/armada-375.dtsi
@@ -582,7 +582,7 @@
 			};
 		};
 
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -601,7 +601,7 @@
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -610,6 +610,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
@@ -618,7 +619,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -627,6 +628,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
diff --git a/arch/arm/dts/armada-xp-mv78230.dtsi b/arch/arm/dts/armada-xp-mv78230.dtsi
index 6e6d0f04bf..f6bab9fb20 100644
--- a/arch/arm/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -114,7 +114,7 @@
 				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -123,6 +123,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -131,7 +132,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -140,6 +141,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -148,7 +150,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -157,6 +159,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -165,7 +168,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -174,6 +177,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -182,7 +186,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -191,6 +195,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;
diff --git a/arch/arm/dts/armada-xp-mv78260.dtsi b/arch/arm/dts/armada-xp-mv78260.dtsi
index c5fdc99f0d..d39231f69d 100644
--- a/arch/arm/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -129,7 +129,7 @@
 				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -138,6 +138,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -146,7 +147,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -155,6 +156,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -163,7 +165,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -172,6 +174,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -180,7 +183,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -189,6 +192,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -197,7 +201,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -206,6 +210,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;
@@ -214,7 +219,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -223,6 +228,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 63>;
 				marvell,pcie-port = <1>;
@@ -231,7 +237,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -240,6 +246,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 64>;
 				marvell,pcie-port = <1>;
@@ -248,7 +255,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -257,6 +264,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 65>;
 				marvell,pcie-port = <1>;
@@ -265,7 +273,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
@@ -274,6 +282,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 99>;
 				marvell,pcie-port = <2>;
diff --git a/arch/arm/dts/armada-xp-mv78460.dtsi b/arch/arm/dts/armada-xp-mv78460.dtsi
index 0e24f1a385..c642565d1b 100644
--- a/arch/arm/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -150,7 +150,7 @@
 				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
 				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -159,6 +159,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -167,7 +168,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -176,6 +177,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -184,7 +186,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -193,6 +195,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -201,7 +204,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -210,6 +213,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -218,7 +222,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -227,6 +231,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;
@@ -235,7 +240,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -244,6 +249,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 63>;
 				marvell,pcie-port = <1>;
@@ -252,7 +258,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -261,6 +267,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 64>;
 				marvell,pcie-port = <1>;
@@ -269,7 +276,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -278,6 +285,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 65>;
 				marvell,pcie-port = <1>;
@@ -286,7 +294,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
@@ -295,6 +303,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 99>;
 				marvell,pcie-port = <2>;
@@ -303,7 +312,7 @@
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie10: pcie@a,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
@@ -312,6 +321,7 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
 					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 103>;
 				marvell,pcie-port = <3>;
diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts
index 965c38426c..5695e9b758 100644
--- a/arch/arm/dts/armada-xp-theadorable.dts
+++ b/arch/arm/dts/armada-xp-theadorable.dts
@@ -159,6 +159,45 @@
 					spi-max-frequency = <27777777>;
 				};
 			};
+
+			/* The LCD controller is only used on this board */
+			lcd0: lcd-controller@e0000 {
+				compatible = "marvell,armada-xp-lcd";
+				reg = <0xe0000 0x10000>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: panel0 {
+						hactive = <240>;
+						vactive = <320>;
+						hfront-porch = <1>;
+						hback-porch = <45>;
+						vfront-porch = <1>;
+						vback-porch = <3>;
+
+						/* Some dummy parameters */
+						clock-frequency = <0>;
+						hsync-len = <0>;
+						vsync-len = <0>;
+					};
+				};
+			};
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 85d7dd1610..9e23043a48 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -158,18 +158,6 @@ int serdes_phy_config(void);
  */
 int ddr3_init(void);
 
-struct mvebu_lcd_info {
-	u32 fb_base;
-	int x_res;
-	int y_res;
-	int x_fp;		/* frontporch */
-	int y_fp;
-	int x_bp;		/* backporch */
-	int y_bp;
-};
-
-int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info);
-
 /*
  * get_ref_clk
  *
diff --git a/board/Marvell/mvebu_armada-37xx/MAINTAINERS b/board/Marvell/mvebu_armada-37xx/MAINTAINERS
index 9b0afeef10..f2c0a582d7 100644
--- a/board/Marvell/mvebu_armada-37xx/MAINTAINERS
+++ b/board/Marvell/mvebu_armada-37xx/MAINTAINERS
@@ -9,3 +9,8 @@ ESPRESSOBin BOARD
 M:	Konstantin Porotchkin <kostap@marvell.com>
 S:	Maintained
 F:	configs/mvebu_espressobin-88f3720_defconfig
+
+uDPU BOARD
+M:	Vladimir Vid <vladimir.vid@sartura.hr>
+S:	Maintained
+F:	configs/uDPU_defconfig
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
index b59589ae82..dd6def5e6e 100644
--- a/board/theadorable/theadorable.c
+++ b/board/theadorable/theadorable.c
@@ -218,22 +218,6 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-int board_video_init(void)
-{
-	struct mvebu_lcd_info lcd_info;
-
-	/* Reserved memory area via CONFIG_SYS_MEM_TOP_HIDE */
-	lcd_info.fb_base	= gd->ram_size;
-	lcd_info.x_res		= 240;
-	lcd_info.x_fp		= 1;
-	lcd_info.x_bp		= 45;
-	lcd_info.y_res		= 320;
-	lcd_info.y_fp		= 1;
-	lcd_info.y_bp		= 3;
-
-	return mvebu_lcd_register_init(&lcd_info);
-}
-
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index e1c5a1fa13..0f69ff606d 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -56,6 +56,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig
index 0c762ad77c..f22a3ab819 100644
--- a/configs/controlcenterdc_defconfig
+++ b/configs/controlcenterdc_defconfig
@@ -58,6 +58,9 @@ CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig
index 9068a58406..03bf2bcafc 100644
--- a/configs/db-88f6820-amc_defconfig
+++ b/configs/db-88f6820-amc_defconfig
@@ -60,6 +60,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig
index 413010c4ef..b36b7c3b2c 100644
--- a/configs/db-88f6820-gp_defconfig
+++ b/configs/db-88f6820-gp_defconfig
@@ -56,6 +56,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
index 3f140986b6..b6c61c3a48 100644
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@@ -55,6 +55,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
index 5325bd9968..32f37440c3 100644
--- a/configs/ds414_defconfig
+++ b/configs/ds414_defconfig
@@ -52,6 +52,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
index 9e99618998..a7d02e957a 100644
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@@ -62,6 +62,8 @@ CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
@@ -69,6 +71,5 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_MVEBU=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig
index 4a1e23c86c..5cafe2ee34 100644
--- a/configs/turris_omnia_defconfig
+++ b/configs/turris_omnia_defconfig
@@ -37,7 +37,6 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-385-turris-omnia"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_SCSI_AHCI=y
-CONFIG_MISC=y
 CONFIG_ATSHA204A=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_MV=y
@@ -45,6 +44,8 @@ CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
new file mode 100644
index 0000000000..53f2b6e746
--- /dev/null
+++ b/configs/uDPU_defconfig
@@ -0,0 +1,94 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=25804800
+CONFIG_SMBIOS_PRODUCT_NAME="uDPU"
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_SPI_BOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SYS_PROMPT="uDPU>> "
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0:4m(uboot),-(rootfs)"
+CONFIG_MAC_PARTITION=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_CLK=y
+CONFIG_CLK_MVEBU=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MTD=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_MVNETA=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_37XX=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_MVEBU_A3700_UART=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MVEBU_A3700_UART=y
+CONFIG_MVEBU_A3700_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_LZO=y
+CONFIG_SPL_LZO=y
diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index 22482f8d39..25b9e885d8 100644
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -46,7 +46,6 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
 # CONFIG_MMC is not set
 CONFIG_NAND=y
 CONFIG_NAND_PXA3XX=y
@@ -57,6 +56,8 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_MTD_UBI=y
 CONFIG_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
 CONFIG_DEBUG_UART_SHIFT=2
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index f59803dbd6..1521885bde 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -112,4 +112,13 @@ config PCIE_INTEL_FPGA
 	  Say Y here if you want to enable PCIe controller support on Intel
 	  FPGA, example Stratix 10.
 
+config PCI_MVEBU
+	bool "Enable Armada XP/38x PCIe driver"
+	depends on ARCH_MVEBU
+	select DM_PCI
+	select MISC
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada XP/38x SoCs.
+
 endif
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 2cf55cb743..824fa11907 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -1007,12 +1007,26 @@ static int pci_uclass_post_probe(struct udevice *bus)
 	return 0;
 }
 
-static int pci_uclass_child_post_bind(struct udevice *dev)
+int pci_get_devfn(struct udevice *dev)
 {
-	struct pci_child_platdata *pplat;
 	struct fdt_pci_addr addr;
 	int ret;
 
+	/* Extract the devfn from fdt_pci_addr */
+	ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_CONFIG,
+				   "reg", &addr);
+	if (ret) {
+		if (ret != -ENOENT)
+			return -EINVAL;
+	}
+
+	return addr.phys_hi & 0xff00;
+}
+
+static int pci_uclass_child_post_bind(struct udevice *dev)
+{
+	struct pci_child_platdata *pplat;
+
 	if (!dev_of_valid(dev))
 		return 0;
 
@@ -1022,14 +1036,7 @@ static int pci_uclass_child_post_bind(struct udevice *dev)
 	ofnode_read_pci_vendev(dev_ofnode(dev), &pplat->vendor, &pplat->device);
 
 	/* Extract the devfn from fdt_pci_addr */
-	ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_CONFIG, "reg",
-				   &addr);
-	if (ret) {
-		if (ret != -ENOENT)
-			return -EINVAL;
-	} else {
-		pplat->devfn = addr.phys_hi & 0xff00;
-	}
+	pplat->devfn = pci_get_devfn(dev);
 
 	return 0;
 }
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index affe9f98ad..6026fa67f9 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -10,11 +10,16 @@
  */
 
 #include <common.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/of_access.h>
 #include <pci.h>
-#include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
 #include <linux/mbus.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -59,26 +64,22 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PCIE_DEBUG_CTRL			0x1a60
 #define  PCIE_DEBUG_SOFT_RESET		BIT(20)
 
-struct resource {
-	u32 start;
-	u32 end;
-};
-
 struct mvebu_pcie {
 	struct pci_controller hose;
-	char *name;
 	void __iomem *base;
 	void __iomem *membase;
 	struct resource mem;
 	void __iomem *iobase;
 	u32 port;
 	u32 lane;
+	int devfn;
 	u32 lane_mask;
 	pci_dev_t dev;
+	char name[16];
+	unsigned int mem_target;
+	unsigned int mem_attr;
 };
 
-#define to_pcie(_hc)	container_of(_hc, struct mvebu_pcie, pci)
-
 /*
  * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
  * into SoCs address space. Each controller will map 128M of MEM
@@ -87,82 +88,6 @@ struct mvebu_pcie {
 static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
 #define PCIE_MEM_SIZE	(128 << 20)
 
-#if defined(CONFIG_ARMADA_38X)
-#define PCIE_BASE(if)					\
-	((if) == 0 ?					\
-	 MVEBU_REG_PCIE0_BASE :				\
-	 (MVEBU_REG_PCIE_BASE + 0x4000 * (if - 1)))
-
-/*
- * On A38x MV6820 these PEX ports are supported:
- *  0 - Port 0.0
- *  1 - Port 1.0
- *  2 - Port 2.0
- *  3 - Port 3.0
- */
-#define MAX_PEX 4
-static struct mvebu_pcie pcie_bus[MAX_PEX];
-
-static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
-				int *mem_target, int *mem_attr)
-{
-	u8 port[] = { 0, 1, 2, 3 };
-	u8 lane[] = { 0, 0, 0, 0 };
-	u8 target[] = { 8, 4, 4, 4 };
-	u8 attr[] = { 0xe8, 0xe8, 0xd8, 0xb8 };
-
-	pcie->port = port[pex_idx];
-	pcie->lane = lane[pex_idx];
-	*mem_target = target[pex_idx];
-	*mem_attr = attr[pex_idx];
-}
-#else
-#define PCIE_BASE(if)							\
-	((if) < 8 ?							\
-	 (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \
-	 (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000))
-
-/*
- * On AXP MV78460 these PEX ports are supported:
- *  0 - Port 0.0
- *  1 - Port 0.1
- *  2 - Port 0.2
- *  3 - Port 0.3
- *  4 - Port 1.0
- *  5 - Port 1.1
- *  6 - Port 1.2
- *  7 - Port 1.3
- *  8 - Port 2.0
- *  9 - Port 3.0
- */
-#define MAX_PEX 10
-static struct mvebu_pcie pcie_bus[MAX_PEX];
-
-static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
-				int *mem_target, int *mem_attr)
-{
-	u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 };
-	u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 };
-	u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 };
-	u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78,
-		      0xe8, 0xd8, 0xb8, 0x78,
-		      0xf8, 0xf8 };
-
-	pcie->port = port[pex_idx];
-	pcie->lane = lane[pex_idx];
-	*mem_target = target[pex_idx];
-	*mem_attr = attr[pex_idx];
-}
-#endif
-
-static int mvebu_pex_unit_is_x4(int pex_idx)
-{
-	int pex_unit = pex_idx < 9 ? pex_idx >> 2 : 3;
-	u32 mask = (0x0f << (pex_unit * 8));
-
-	return (readl(COMPHY_REFCLK_ALIGNMENT) & mask) == mask;
-}
-
 static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
 {
 	u32 val;
@@ -211,67 +136,83 @@ static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
 	return container_of(hose, struct mvebu_pcie, hose);
 }
 
-static int mvebu_pcie_read_config_dword(struct pci_controller *hose,
-		pci_dev_t dev, int offset, u32 *val)
+static int mvebu_pcie_read_config(struct udevice *bus, pci_dev_t bdf,
+				  uint offset, ulong *valuep,
+				  enum pci_size_t size)
 {
-	struct mvebu_pcie *pcie = hose_to_pcie(hose);
+	struct mvebu_pcie *pcie = dev_get_platdata(bus);
 	int local_bus = PCI_BUS(pcie->dev);
 	int local_dev = PCI_DEV(pcie->dev);
 	u32 reg;
+	u32 data;
+
+	debug("PCIE CFG read:  (b,d,f)=(%2d,%2d,%2d) ",
+	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
 
 	/* Only allow one other device besides the local one on the local bus */
-	if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
-		if (local_dev == 0 && PCI_DEV(dev) != 1) {
+	if (PCI_BUS(bdf) == local_bus && PCI_DEV(bdf) != local_dev) {
+		if (local_dev == 0 && PCI_DEV(bdf) != 1) {
+			debug("- out of range\n");
 			/*
 			 * If local dev is 0, the first other dev can
 			 * only be 1
 			 */
-			*val = 0xffffffff;
-			return 1;
-		} else if (local_dev != 0 && PCI_DEV(dev) != 0) {
+			*valuep = pci_get_ff(size);
+			return 0;
+		} else if (local_dev != 0 && PCI_DEV(bdf) != 0) {
+			debug("- out of range\n");
 			/*
 			 * If local dev is not 0, the first other dev can
 			 * only be 0
 			 */
-			*val = 0xffffffff;
-			return 1;
+			*valuep = pci_get_ff(size);
+			return 0;
 		}
 	}
 
 	/* write address */
-	reg = PCIE_CONF_ADDR(dev, offset);
+	reg = PCIE_CONF_ADDR(bdf, offset);
 	writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
-	*val = readl(pcie->base + PCIE_CONF_DATA_OFF);
+	data = readl(pcie->base + PCIE_CONF_DATA_OFF);
+	debug("(addr,val)=(0x%04x, 0x%08x)\n", offset, data);
+	*valuep = pci_conv_32_to_size(data, offset, size);
 
 	return 0;
 }
 
-static int mvebu_pcie_write_config_dword(struct pci_controller *hose,
-		pci_dev_t dev, int offset, u32 val)
+static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
+				   uint offset, ulong value,
+				   enum pci_size_t size)
 {
-	struct mvebu_pcie *pcie = hose_to_pcie(hose);
+	struct mvebu_pcie *pcie = dev_get_platdata(bus);
 	int local_bus = PCI_BUS(pcie->dev);
 	int local_dev = PCI_DEV(pcie->dev);
+	u32 data;
+
+	debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
+	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
+	debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
 
 	/* Only allow one other device besides the local one on the local bus */
-	if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
-		if (local_dev == 0 && PCI_DEV(dev) != 1) {
+	if (PCI_BUS(bdf) == local_bus && PCI_DEV(bdf) != local_dev) {
+		if (local_dev == 0 && PCI_DEV(bdf) != 1) {
 			/*
 			 * If local dev is 0, the first other dev can
 			 * only be 1
 			 */
-			return 1;
-		} else if (local_dev != 0 && PCI_DEV(dev) != 0) {
+			return 0;
+		} else if (local_dev != 0 && PCI_DEV(bdf) != 0) {
 			/*
 			 * If local dev is not 0, the first other dev can
 			 * only be 0
 			 */
-			return 1;
+			return 0;
 		}
 	}
 
-	writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF);
-	writel(val, pcie->base + PCIE_CONF_DATA_OFF);
+	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
+	data = pci_conv_size_to_32(0, value, offset, size);
+	writel(data, pcie->base + PCIE_CONF_DATA_OFF);
 
 	return 0;
 }
@@ -331,107 +272,242 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
 	       pcie->base + PCIE_BAR_CTRL_OFF(1));
 }
 
-void pci_init_board(void)
+static int mvebu_pcie_probe(struct udevice *dev)
 {
-	int mem_target, mem_attr, i;
-	int bus = 0;
+	struct mvebu_pcie *pcie = dev_get_platdata(dev);
+	struct udevice *ctlr = pci_get_controller(dev);
+	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
+	static int bus;
 	u32 reg;
-	u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4);
 
-	/* Check SoC Control Power State */
-	debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n",
-	      __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1),
-	      SELECT(soc_ctrl, 2));
+	debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
+	      pcie->port, pcie->lane, (u32)pcie->base);
+
+	/* Read Id info and local bus/dev */
+	debug("direct conf read %08x, local bus %d, local dev %d\n",
+	      readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
+	      mvebu_pcie_get_local_dev_nr(pcie));
+
+	mvebu_pcie_set_local_bus_nr(pcie, bus);
+	mvebu_pcie_set_local_dev_nr(pcie, 0);
+	pcie->dev = PCI_BDF(bus, 0, 0);
+
+	pcie->mem.start = (u32)mvebu_pcie_membase;
+	pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
+	mvebu_pcie_membase += PCIE_MEM_SIZE;
+
+	if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr,
+					(phys_addr_t)pcie->mem.start,
+					PCIE_MEM_SIZE)) {
+		printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
+		       (u32)pcie->mem.start, PCIE_MEM_SIZE);
+	}
+
+	/* Setup windows and configure host bridge */
+	mvebu_pcie_setup_wins(pcie);
+
+	/* Master + slave enable. */
+	reg = readl(pcie->base + PCIE_CMD_OFF);
+	reg |= PCI_COMMAND_MEMORY;
+	reg |= PCI_COMMAND_MASTER;
+	reg |= BIT(10);		/* disable interrupts */
+	writel(reg, pcie->base + PCIE_CMD_OFF);
+
+	/* Set BAR0 to internal registers */
+	writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
+	writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
 
-	for (i = 0; i < MAX_PEX; i++) {
-		struct mvebu_pcie *pcie = &pcie_bus[i];
-		struct pci_controller *hose = &pcie->hose;
+	/* PCI memory space */
+	pci_set_region(hose->regions + 0, pcie->mem.start,
+		       pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
+	pci_set_region(hose->regions + 1,
+		       0, 0,
+		       gd->ram_size,
+		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+	hose->region_count = 2;
 
-		/* Get port number, lane number and memory target / attr */
-		mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
+	bus++;
 
-		/* Don't read at all from pci registers if port power is down */
-		if (SELECT(soc_ctrl, pcie->port) == 0) {
-			if (pcie->lane == 0)
-				debug("%s: skipping port %d\n", __func__, pcie->port);
+	return 0;
+}
+
+static int mvebu_pcie_port_parse_dt(ofnode node, struct mvebu_pcie *pcie)
+{
+	const u32 *addr;
+	int len;
+
+	addr = ofnode_get_property(node, "assigned-addresses", &len);
+	if (!addr) {
+		pr_err("property \"assigned-addresses\" not found");
+		return -FDT_ERR_NOTFOUND;
+	}
+
+	pcie->base = (void *)(fdt32_to_cpu(addr[2]) + SOC_REGS_PHY_BASE);
+
+	return 0;
+}
+
+#define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
+#define    DT_TYPE_IO                 0x1
+#define    DT_TYPE_MEM32              0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(ofnode node, int devfn,
+			      unsigned long type,
+			      unsigned int *tgt,
+			      unsigned int *attr)
+{
+	const int na = 3, ns = 2;
+	const __be32 *range;
+	int rlen, nranges, rangesz, pna, i;
+
+	*tgt = -1;
+	*attr = -1;
+
+	range = ofnode_get_property(node, "ranges", &rlen);
+	if (!range)
+		return -EINVAL;
+
+	pna = 2; /* hardcoded for now because of lack of of_n_addr_cells() */
+	rangesz = pna + na + ns;
+	nranges = rlen / sizeof(__be32) / rangesz;
+
+	for (i = 0; i < nranges; i++, range += rangesz) {
+		u32 flags = of_read_number(range, 1);
+		u32 slot = of_read_number(range + 1, 1);
+		u64 cpuaddr = of_read_number(range + na, pna);
+		unsigned long rtype;
+
+		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+			rtype = IORESOURCE_IO;
+		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+			rtype = IORESOURCE_MEM;
+		else
 			continue;
+
+		/*
+		 * The Linux code used PCI_SLOT() here, which expects devfn
+		 * in bits 7..0. PCI_DEV() in U-Boot is similar to PCI_SLOT(),
+		 * only expects devfn in 15..8, where its saved in this driver.
+		 */
+		if (slot == PCI_DEV(devfn) && type == rtype) {
+			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+			return 0;
 		}
+	}
+
+	return -ENOENT;
+}
+
+static int mvebu_pcie_ofdata_to_platdata(struct udevice *dev)
+{
+	struct mvebu_pcie *pcie = dev_get_platdata(dev);
+	int ret = 0;
+
+	/* Get port number, lane number and memory target / attr */
+	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-port",
+			    &pcie->port)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-lane", &pcie->lane))
+		pcie->lane = 0;
 
-		pcie->base = (void __iomem *)PCIE_BASE(i);
+	sprintf(pcie->name, "pcie%d.%d", pcie->port, pcie->lane);
 
-		/* Check link and skip ports that have no link */
-		if (!mvebu_pcie_link_up(pcie)) {
-			debug("%s: PCIe %d.%d - down\n", __func__,
-			      pcie->port, pcie->lane);
+	/* pci_get_devfn() returns devfn in bits 15..8, see PCI_DEV usage */
+	pcie->devfn = pci_get_devfn(dev);
+	if (pcie->devfn < 0) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
+				 IORESOURCE_MEM,
+				 &pcie->mem_target, &pcie->mem_attr);
+	if (ret < 0) {
+		printf("%s: cannot get tgt/attr for mem window\n", pcie->name);
+		goto err;
+	}
+
+	/* Parse PCIe controller register base from DT */
+	ret = mvebu_pcie_port_parse_dt(dev_ofnode(dev), pcie);
+	if (ret < 0)
+		goto err;
+
+	/* Check link and skip ports that have no link */
+	if (!mvebu_pcie_link_up(pcie)) {
+		debug("%s: %s - down\n", __func__, pcie->name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static const struct dm_pci_ops mvebu_pcie_ops = {
+	.read_config	= mvebu_pcie_read_config,
+	.write_config	= mvebu_pcie_write_config,
+};
+
+static struct driver pcie_mvebu_drv = {
+	.name			= "pcie_mvebu",
+	.id			= UCLASS_PCI,
+	.ops			= &mvebu_pcie_ops,
+	.probe			= mvebu_pcie_probe,
+	.ofdata_to_platdata	= mvebu_pcie_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct mvebu_pcie),
+};
+
+/*
+ * Use a MISC device to bind the n instances (child nodes) of the
+ * PCIe base controller in UCLASS_PCI.
+ */
+static int mvebu_pcie_bind(struct udevice *parent)
+{
+	struct mvebu_pcie *pcie;
+	struct uclass_driver *drv;
+	struct udevice *dev;
+	ofnode subnode;
+
+	/* Lookup eth driver */
+	drv = lists_uclass_lookup(UCLASS_PCI);
+	if (!drv) {
+		puts("Cannot find PCI driver\n");
+		return -ENOENT;
+	}
+
+	ofnode_for_each_subnode(subnode, dev_ofnode(parent)) {
+		if (!ofnode_is_available(subnode))
 			continue;
-		}
-		debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
-		      pcie->port, pcie->lane, (u32)pcie->base);
-
-		/* Read Id info and local bus/dev */
-		debug("direct conf read %08x, local bus %d, local dev %d\n",
-		      readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
-		      mvebu_pcie_get_local_dev_nr(pcie));
-
-		mvebu_pcie_set_local_bus_nr(pcie, bus);
-		mvebu_pcie_set_local_dev_nr(pcie, 0);
-		pcie->dev = PCI_BDF(bus, 0, 0);
-
-		pcie->mem.start = (u32)mvebu_pcie_membase;
-		pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
-		mvebu_pcie_membase += PCIE_MEM_SIZE;
-
-		if (mvebu_mbus_add_window_by_id(mem_target, mem_attr,
-						(phys_addr_t)pcie->mem.start,
-						PCIE_MEM_SIZE)) {
-			printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
-			       (u32)pcie->mem.start, PCIE_MEM_SIZE);
-		}
 
-		/* Setup windows and configure host bridge */
-		mvebu_pcie_setup_wins(pcie);
-
-		/* Master + slave enable. */
-		reg = readl(pcie->base + PCIE_CMD_OFF);
-		reg |= PCI_COMMAND_MEMORY;
-		reg |= PCI_COMMAND_MASTER;
-		reg |= BIT(10);		/* disable interrupts */
-		writel(reg, pcie->base + PCIE_CMD_OFF);
-
-		/* Setup U-Boot PCI Controller */
-		hose->first_busno = 0;
-		hose->current_busno = bus;
-
-		/* PCI memory space */
-		pci_set_region(hose->regions + 0, pcie->mem.start,
-			       pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
-		pci_set_region(hose->regions + 1,
-			       0, 0,
-			       gd->ram_size,
-			       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-		hose->region_count = 2;
-
-		pci_set_ops(hose,
-			    pci_hose_read_config_byte_via_dword,
-			    pci_hose_read_config_word_via_dword,
-			    mvebu_pcie_read_config_dword,
-			    pci_hose_write_config_byte_via_dword,
-			    pci_hose_write_config_word_via_dword,
-			    mvebu_pcie_write_config_dword);
-		pci_register_hose(hose);
-
-		hose->last_busno = pci_hose_scan(hose);
-
-		/* Set BAR0 to internal registers */
-		writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
-		writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
-
-		bus = hose->last_busno + 1;
-
-		/* need to skip more for X4 links, otherwise scan will hang */
-		if (mvebu_soc_family() == MVEBU_SOC_AXP) {
-			if (mvebu_pex_unit_is_x4(i))
-				i += 3;
-		}
+		pcie = calloc(1, sizeof(*pcie));
+		if (!pcie)
+			return -ENOMEM;
+
+		/* Create child device UCLASS_PCI and bind it */
+		device_bind_ofnode(parent, &pcie_mvebu_drv, pcie->name, pcie,
+				   subnode, &dev);
 	}
+
+	return 0;
 }
+
+static const struct udevice_id mvebu_pcie_ids[] = {
+	{ .compatible = "marvell,armada-xp-pcie" },
+	{ .compatible = "marvell,armada-370-pcie" },
+	{ }
+};
+
+U_BOOT_DRIVER(pcie_mvebu_base) = {
+	.name			= "pcie_mvebu_base",
+	.id			= UCLASS_MISC,
+	.of_match		= mvebu_pcie_ids,
+	.bind			= mvebu_pcie_bind,
+};
diff --git a/drivers/video/mvebu_lcd.c b/drivers/video/mvebu_lcd.c
index 5bf0d01faa..dc6254514a 100644
--- a/drivers/video/mvebu_lcd.c
+++ b/drivers/video/mvebu_lcd.c
@@ -6,74 +6,96 @@
  */
 
 #include <common.h>
-#include <video_fb.h>
+#include <dm.h>
+#include <video.h>
 #include <linux/mbus.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 
-#define MVEBU_LCD_WIN_CONTROL(w)        (MVEBU_LCD_BASE + 0xf000 + ((w) << 4))
-#define MVEBU_LCD_WIN_BASE(w)           (MVEBU_LCD_BASE + 0xf004 + ((w) << 4))
-#define MVEBU_LCD_WIN_REMAP(w)          (MVEBU_LCD_BASE + 0xf00c + ((w) << 4))
-
-#define MVEBU_LCD_CFG_DMA_START_ADDR_0	(MVEBU_LCD_BASE + 0x00cc)
-#define MVEBU_LCD_CFG_DMA_START_ADDR_1	(MVEBU_LCD_BASE + 0x00dc)
-
-#define MVEBU_LCD_CFG_GRA_START_ADDR0	(MVEBU_LCD_BASE + 0x00f4)
-#define MVEBU_LCD_CFG_GRA_START_ADDR1	(MVEBU_LCD_BASE + 0x00f8)
-#define MVEBU_LCD_CFG_GRA_PITCH		(MVEBU_LCD_BASE + 0x00fc)
-#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0100)
-#define MVEBU_LCD_SPU_GRA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0104)
-#define MVEBU_LCD_SPU_GZM_HPXL_VLN	(MVEBU_LCD_BASE + 0x0108)
-#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x010c)
-#define MVEBU_LCD_SPU_HWC_HPXL_VLN	(MVEBU_LCD_BASE + 0x0110)
-#define MVEBU_LCD_SPUT_V_H_TOTAL	(MVEBU_LCD_BASE + 0x0114)
-#define MVEBU_LCD_SPU_V_H_ACTIVE	(MVEBU_LCD_BASE + 0x0118)
-#define MVEBU_LCD_SPU_H_PORCH		(MVEBU_LCD_BASE + 0x011c)
-#define MVEBU_LCD_SPU_V_PORCH		(MVEBU_LCD_BASE + 0x0120)
-#define MVEBU_LCD_SPU_BLANKCOLOR	(MVEBU_LCD_BASE + 0x0124)
-#define MVEBU_LCD_SPU_ALPHA_COLOR1	(MVEBU_LCD_BASE + 0x0128)
-#define MVEBU_LCD_SPU_ALPHA_COLOR2	(MVEBU_LCD_BASE + 0x012c)
-#define MVEBU_LCD_SPU_COLORKEY_Y	(MVEBU_LCD_BASE + 0x0130)
-#define MVEBU_LCD_SPU_COLORKEY_U	(MVEBU_LCD_BASE + 0x0134)
-#define MVEBU_LCD_SPU_COLORKEY_V	(MVEBU_LCD_BASE + 0x0138)
-#define MVEBU_LCD_CFG_RDREG4F		(MVEBU_LCD_BASE + 0x013c)
-#define MVEBU_LCD_SPU_SPI_RXDATA	(MVEBU_LCD_BASE + 0x0140)
-#define MVEBU_LCD_SPU_ISA_RXDATA	(MVEBU_LCD_BASE + 0x0144)
-#define MVEBU_LCD_SPU_DBG_ISA		(MVEBU_LCD_BASE + 0x0148)
-
-#define MVEBU_LCD_SPU_HWC_RDDAT		(MVEBU_LCD_BASE + 0x0158)
-#define MVEBU_LCD_SPU_GAMMA_RDDAT	(MVEBU_LCD_BASE + 0x015c)
-#define MVEBU_LCD_SPU_PALETTE_RDDAT	(MVEBU_LCD_BASE + 0x0160)
-#define MVEBU_LCD_SPU_IOPAD_IN		(MVEBU_LCD_BASE + 0x0178)
-#define MVEBU_LCD_FRAME_COUNT		(MVEBU_LCD_BASE + 0x017c)
-#define MVEBU_LCD_SPU_DMA_CTRL0		(MVEBU_LCD_BASE + 0x0190)
-#define MVEBU_LCD_SPU_DMA_CTRL1		(MVEBU_LCD_BASE + 0x0194)
-#define MVEBU_LCD_SPU_SRAM_CTRL		(MVEBU_LCD_BASE + 0x0198)
-#define MVEBU_LCD_SPU_SRAM_WRDAT	(MVEBU_LCD_BASE + 0x019c)
-#define MVEBU_LCD_SPU_SRAM_PARA0	(MVEBU_LCD_BASE + 0x01a0)
-#define MVEBU_LCD_SPU_SRAM_PARA1	(MVEBU_LCD_BASE + 0x01a4)
-#define MVEBU_LCD_CFG_SCLK_DIV		(MVEBU_LCD_BASE + 0x01a8)
-#define MVEBU_LCD_SPU_CONTRAST		(MVEBU_LCD_BASE + 0x01ac)
-#define MVEBU_LCD_SPU_SATURATION	(MVEBU_LCD_BASE + 0x01b0)
-#define MVEBU_LCD_SPU_CBSH_HUE		(MVEBU_LCD_BASE + 0x01b4)
-#define MVEBU_LCD_SPU_DUMB_CTRL		(MVEBU_LCD_BASE + 0x01b8)
-#define MVEBU_LCD_SPU_IOPAD_CONTROL	(MVEBU_LCD_BASE + 0x01bc)
-#define MVEBU_LCD_SPU_IRQ_ENA_2		(MVEBU_LCD_BASE + 0x01d8)
-#define MVEBU_LCD_SPU_IRQ_ISR_2		(MVEBU_LCD_BASE + 0x01dc)
-#define MVEBU_LCD_SPU_IRQ_ENA		(MVEBU_LCD_BASE + 0x01c0)
-#define MVEBU_LCD_SPU_IRQ_ISR		(MVEBU_LCD_BASE + 0x01c4)
-#define MVEBU_LCD_ADLL_CTRL		(MVEBU_LCD_BASE + 0x01c8)
-#define MVEBU_LCD_CLK_DIS		(MVEBU_LCD_BASE + 0x01cc)
-#define MVEBU_LCD_VGA_HVSYNC_DELAY	(MVEBU_LCD_BASE + 0x01d4)
-#define MVEBU_LCD_CLK_CFG_0		(MVEBU_LCD_BASE + 0xf0a0)
-#define MVEBU_LCD_CLK_CFG_1		(MVEBU_LCD_BASE + 0xf0a4)
-#define MVEBU_LCD_LVDS_CLK_CFG		(MVEBU_LCD_BASE + 0xf0ac)
+#define MVEBU_LCD_WIN_CONTROL(w)	(0xf000 + ((w) << 4))
+#define MVEBU_LCD_WIN_BASE(w)		(0xf004 + ((w) << 4))
+#define MVEBU_LCD_WIN_REMAP(w)		(0xf00c + ((w) << 4))
+
+#define MVEBU_LCD_CFG_DMA_START_ADDR_0	0x00cc
+#define MVEBU_LCD_CFG_DMA_START_ADDR_1	0x00dc
+
+#define MVEBU_LCD_CFG_GRA_START_ADDR0	0x00f4
+#define MVEBU_LCD_CFG_GRA_START_ADDR1	0x00f8
+#define MVEBU_LCD_CFG_GRA_PITCH		0x00fc
+#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN	0x0100
+#define MVEBU_LCD_SPU_GRA_HPXL_VLN	0x0104
+#define MVEBU_LCD_SPU_GZM_HPXL_VLN	0x0108
+#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN	0x010c
+#define MVEBU_LCD_SPU_HWC_HPXL_VLN	0x0110
+#define MVEBU_LCD_SPUT_V_H_TOTAL	0x0114
+#define MVEBU_LCD_SPU_V_H_ACTIVE	0x0118
+#define MVEBU_LCD_SPU_H_PORCH		0x011c
+#define MVEBU_LCD_SPU_V_PORCH		0x0120
+#define MVEBU_LCD_SPU_BLANKCOLOR	0x0124
+#define MVEBU_LCD_SPU_ALPHA_COLOR1	0x0128
+#define MVEBU_LCD_SPU_ALPHA_COLOR2	0x012c
+#define MVEBU_LCD_SPU_COLORKEY_Y	0x0130
+#define MVEBU_LCD_SPU_COLORKEY_U	0x0134
+#define MVEBU_LCD_SPU_COLORKEY_V	0x0138
+#define MVEBU_LCD_CFG_RDREG4F		0x013c
+#define MVEBU_LCD_SPU_SPI_RXDATA	0x0140
+#define MVEBU_LCD_SPU_ISA_RXDATA	0x0144
+#define MVEBU_LCD_SPU_DBG_ISA		0x0148
+
+#define MVEBU_LCD_SPU_HWC_RDDAT		0x0158
+#define MVEBU_LCD_SPU_GAMMA_RDDAT	0x015c
+#define MVEBU_LCD_SPU_PALETTE_RDDAT	0x0160
+#define MVEBU_LCD_SPU_IOPAD_IN		0x0178
+#define MVEBU_LCD_FRAME_COUNT		0x017c
+#define MVEBU_LCD_SPU_DMA_CTRL0		0x0190
+#define MVEBU_LCD_SPU_DMA_CTRL1		0x0194
+#define MVEBU_LCD_SPU_SRAM_CTRL		0x0198
+#define MVEBU_LCD_SPU_SRAM_WRDAT	0x019c
+#define MVEBU_LCD_SPU_SRAM_PARA0	0x01a0
+#define MVEBU_LCD_SPU_SRAM_PARA1	0x01a4
+#define MVEBU_LCD_CFG_SCLK_DIV		0x01a8
+#define MVEBU_LCD_SPU_CONTRAST		0x01ac
+#define MVEBU_LCD_SPU_SATURATION	0x01b0
+#define MVEBU_LCD_SPU_CBSH_HUE		0x01b4
+#define MVEBU_LCD_SPU_DUMB_CTRL		0x01b8
+#define MVEBU_LCD_SPU_IOPAD_CONTROL	0x01bc
+#define MVEBU_LCD_SPU_IRQ_ENA_2		0x01d8
+#define MVEBU_LCD_SPU_IRQ_ISR_2		0x01dc
+#define MVEBU_LCD_SPU_IRQ_ENA		0x01c0
+#define MVEBU_LCD_SPU_IRQ_ISR		0x01c4
+#define MVEBU_LCD_ADLL_CTRL		0x01c8
+#define MVEBU_LCD_CLK_DIS		0x01cc
+#define MVEBU_LCD_VGA_HVSYNC_DELAY	0x01d4
+#define MVEBU_LCD_CLK_CFG_0		0xf0a0
+#define MVEBU_LCD_CLK_CFG_1		0xf0a4
+#define MVEBU_LCD_LVDS_CLK_CFG		0xf0ac
 
 #define MVEBU_LVDS_PADS_REG		(MVEBU_SYSTEM_REG_BASE + 0xf0)
 
+enum {
+	/* Maximum LCD size we support */
+	LCD_MAX_WIDTH		= 640,
+	LCD_MAX_HEIGHT		= 480,
+	LCD_MAX_LOG2_BPP	= VIDEO_BPP16,
+};
+
+struct mvebu_lcd_info {
+	u32 fb_base;
+	int x_res;
+	int y_res;
+	int x_fp;
+	int y_fp;
+	int x_bp;
+	int y_bp;
+};
+
+struct mvebu_video_priv {
+	uintptr_t regs;
+};
+
 /* Setup Mbus Bridge Windows for LCD */
-static void mvebu_lcd_conf_mbus_registers(void)
+static void mvebu_lcd_conf_mbus_registers(uintptr_t regs)
 {
 	const struct mbus_dram_target_info *dram;
 	int i;
@@ -82,9 +104,9 @@ static void mvebu_lcd_conf_mbus_registers(void)
 
 	/* Disable windows, set size/base/remap to 0  */
 	for (i = 0; i < 6; i++) {
-		writel(0, MVEBU_LCD_WIN_CONTROL(i));
-		writel(0, MVEBU_LCD_WIN_BASE(i));
-		writel(0, MVEBU_LCD_WIN_REMAP(i));
+		writel(0, regs + MVEBU_LCD_WIN_CONTROL(i));
+		writel(0, regs + MVEBU_LCD_WIN_BASE(i));
+		writel(0, regs + MVEBU_LCD_WIN_REMAP(i));
 	}
 
 	/* Write LCD bridge window registers */
@@ -92,14 +114,15 @@ static void mvebu_lcd_conf_mbus_registers(void)
 		const struct mbus_dram_window *cs = dram->cs + i;
 		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
 		       (dram->mbus_dram_target_id << 4) | 1,
-		       MVEBU_LCD_WIN_CONTROL(i));
+		       regs + MVEBU_LCD_WIN_CONTROL(i));
 
-		writel(cs->base & 0xffff0000, MVEBU_LCD_WIN_BASE(i));
+		writel(cs->base & 0xffff0000, regs + MVEBU_LCD_WIN_BASE(i));
 	}
 }
 
 /* Initialize LCD registers */
-int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
+static void mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info,
+				    uintptr_t regs)
 {
 	/* Local variable for easier handling */
 	int x = lcd_info->x_res;
@@ -107,7 +130,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	u32 val;
 
 	/* Setup Mbus Bridge Windows */
-	mvebu_lcd_conf_mbus_registers();
+	mvebu_lcd_conf_mbus_registers(regs);
 
 	/*
 	 * Set LVDS Pads Control Register
@@ -121,8 +144,8 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * end (currently 1GB-64MB but also may be 2GB-64MB).
 	 * See also the Window 0 settings!
 	 */
-	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR0);
-	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR1);
+	writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR0);
+	writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR1);
 
 	/*
 	 * Set the LCD_CFG_GRA_PITCH Register
@@ -132,14 +155,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 15-00: Line Length in Bytes
 	 *             240*2 (for RGB1555)=480=0x1E0
 	 */
-	writel(0x80100000 + 2 * x, MVEBU_LCD_CFG_GRA_PITCH);
+	writel(0x80100000 + 2 * x, regs + MVEBU_LCD_CFG_GRA_PITCH);
 
 	/*
 	 * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register
 	 * Bits 31-16: Vertical start of graphical overlay on screen
 	 * Bits 15-00: Horizontal start of graphical overlay on screen
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
 
 	/*
 	 * Set the LCD_SPU_GRA_HPXL_VLN Register
@@ -147,7 +170,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
 	 * Values before zooming
 	 */
-	writel((y << 16) | x, MVEBU_LCD_SPU_GRA_HPXL_VLN);
+	writel((y << 16) | x, regs + MVEBU_LCD_SPU_GRA_HPXL_VLN);
 
 	/*
 	 * Set the LCD_SPU_GZM_HPXL_VLN Register
@@ -155,21 +178,21 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
 	 * Values after zooming
 	 */
-	writel((y << 16) | x, MVEBU_LCD_SPU_GZM_HPXL_VLN);
+	writel((y << 16) | x, regs + MVEBU_LCD_SPU_GZM_HPXL_VLN);
 
 	/*
 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
 	 * Bits 31-16: Vertical position of HW Cursor 320=0x140
 	 * Bits 15-00: Horizontal position of HW Cursor 240=0xF0
 	 */
-	writel((y << 16) | x, MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
+	writel((y << 16) | x, regs + MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
 
 	/*
 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
 	 * Bits 31-16: Vertical size of HW Cursor
 	 * Bits 15-00: Horizontal size of HW Cursor
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_HWC_HPXL_VLN);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_HWC_HPXL_VLN);
 
 	/*
 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
@@ -191,14 +214,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 */
 	val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) |
 		(x + lcd_info->x_fp + lcd_info->x_bp + 1);
-	writel(val, MVEBU_LCD_SPUT_V_H_TOTAL);
+	writel(val, regs + MVEBU_LCD_SPUT_V_H_TOTAL);
 
 	/*
 	 * Set the LCD_SPU_V_H_ACTIVE Register
 	 * Bits 31-16: Screen active vertical lines 320=0x140
 	 * Bits 15-00: Screen active horizontakl pixels 240=0x00F0
 	 */
-	writel((y << 16) | x, MVEBU_LCD_SPU_V_H_ACTIVE);
+	writel((y << 16) | x, regs + MVEBU_LCD_SPU_V_H_ACTIVE);
 
 	/*
 	 * Set the LCD_SPU_H_PORCH Register
@@ -207,7 +230,8 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Note: The terms "front" and "back" for the Marvell seem to be
 	 *       exactly opposite to the display.
 	 */
-	writel((lcd_info->x_fp << 16) | lcd_info->x_bp, MVEBU_LCD_SPU_H_PORCH);
+	writel((lcd_info->x_fp << 16) | lcd_info->x_bp,
+	       regs + MVEBU_LCD_SPU_H_PORCH);
 
 	/*
 	 * Set the LCD_SPU_V_PORCH Register
@@ -216,14 +240,15 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Note: The terms "front" and "back" for the Marvell seem to be exactly
 	 *       opposite to the display.
 	 */
-	writel((lcd_info->y_fp << 16) | lcd_info->y_bp, MVEBU_LCD_SPU_V_PORCH);
+	writel((lcd_info->y_fp << 16) | lcd_info->y_bp,
+	       regs + MVEBU_LCD_SPU_V_PORCH);
 
 	/*
 	 * Set the LCD_SPU_BLANKCOLOR Register
 	 * This should be black = 0
 	 * For tests this is magenta=00FF00FF
 	 */
-	writel(0x00FF00FF, MVEBU_LCD_SPU_BLANKCOLOR);
+	writel(0x00FF00FF, regs + MVEBU_LCD_SPU_BLANKCOLOR);
 
 	/*
 	 * Registers in the range of 0x0128 to 0x012C are colors for the cursor
@@ -240,7 +265,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bit      8: FIFO watermark for DMA: 0=disable
 	 * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80
 	 */
-	writel(0x00000780, MVEBU_LCD_CFG_RDREG4F);
+	writel(0x00000780, regs + MVEBU_LCD_CFG_RDREG4F);
 
 	/*
 	 * Set the LCD_SPU_DMACTRL 0 Register
@@ -271,7 +296,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bit     01: Video YUV to RGB Conversion: 0=disable
 	 * Bit     00: Video  Transfer: 0=disable
 	 */
-	writel(0x88111100, MVEBU_LCD_SPU_DMA_CTRL0);
+	writel(0x88111100, regs + MVEBU_LCD_SPU_DMA_CTRL0);
 
 	/*
 	 * Set the LCD_SPU_DMA_CTRL1 Register
@@ -288,7 +313,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 15-08: Configure Alpha: 0x00.
 	 * Bits 07-00: Reserved.
 	 */
-	writel(0x20010000, MVEBU_LCD_SPU_DMA_CTRL1);
+	writel(0x20010000, regs + MVEBU_LCD_SPU_DMA_CTRL1);
 
 	/*
 	 * Set the LCD_SPU_SRAM_CTRL Register
@@ -297,14 +322,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb,
 	 *             3=palette, 15=cursor
 	 */
-	writel(0x0000C000, MVEBU_LCD_SPU_SRAM_CTRL);
+	writel(0x0000C000, regs + MVEBU_LCD_SPU_SRAM_CTRL);
 
 	/*
 	 * LCD_SPU_SRAM_WRDAT register: 019C
 	 * LCD_SPU_SRAM_PARA0 register: 01A0
 	 * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_SRAM_PARA1);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_SRAM_PARA1);
 
 
 	/* Clock settings in the at 01A8 and in the range F0A0 see below */
@@ -314,21 +339,21 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0
 	 * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_CONTRAST);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_CONTRAST);
 
 	/*
 	 * Set LCD_SPU_SATURATION
 	 * Bits 31-16: Multiplier signed 4.12 fixed point value
 	 * Bits 15-00: Saturation signed 4.12 fixed point value
 	 */
-	writel(0x10001000, MVEBU_LCD_SPU_SATURATION);
+	writel(0x10001000, regs + MVEBU_LCD_SPU_SATURATION);
 
 	/*
 	 * Set LCD_SPU_HUE
 	 * Bits 31-16: Sine signed 2.14 fixed point value
 	 * Bits 15-00: Cosine signed 2.14 fixed point value
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_CBSH_HUE);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_CBSH_HUE);
 
 	/*
 	 * Set LCD_SPU_DUMB_CTRL
@@ -348,7 +373,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Question: Do we have to disable Smart and Dumb LCD
 	 * and separately enable LVDS?
 	 */
-	writel(0x6000080F, MVEBU_LCD_SPU_DUMB_CTRL);
+	writel(0x6000080F, regs + MVEBU_LCD_SPU_DUMB_CTRL);
 
 	/*
 	 * Set LCD_SPU_IOPAD_CTRL
@@ -366,17 +391,17 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 *             128 Bytes burst
 	 * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ??
 	 */
-	writel(0x000000C0, MVEBU_LCD_SPU_IOPAD_CONTROL);
+	writel(0x000000C0, regs + MVEBU_LCD_SPU_IOPAD_CONTROL);
 
 	/*
 	 * Set SUP_IRQ_ENA_2: Disable all interrupts
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA_2);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA_2);
 
 	/*
 	 * Set SUP_IRQ_ENA: Disable all interrupts.
 	 */
-	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA);
+	writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA);
 
 	/*
 	 * Set up ADDL Control Register
@@ -399,19 +424,19 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay
 	 * Note: ADLL is used for a VGA interface with DAC - not used here
 	 */
-	writel(0x00000000, MVEBU_LCD_ADLL_CTRL);
+	writel(0x00000000, regs + MVEBU_LCD_ADLL_CTRL);
 
 	/*
 	 * Set the LCD_CLK_DIS Register:
 	 * Bits 3 and 4 must be 1
 	 */
-	writel(0x00000018, MVEBU_LCD_CLK_DIS);
+	writel(0x00000018, regs + MVEBU_LCD_CLK_DIS);
 
 	/*
 	 * Set the LCD_VGA_HSYNC/VSYNC Delay Register:
 	 * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals
 	 */
-	writel(0x00000000, MVEBU_LCD_VGA_HVSYNC_DELAY);
+	writel(0x00000000, regs + MVEBU_LCD_VGA_HVSYNC_DELAY);
 
 	/*
 	 * Clock registers
@@ -423,12 +448,12 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	/*
 	 * Disable PLL, see "LCD Clock Configuration 1 Register" below
 	 */
-	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
+	writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
 
 	/*
 	 * Powerdown, see "LCD Clock Configuration 0 Register" below
 	 */
-	writel(0x94000174, MVEBU_LCD_CLK_CFG_0);
+	writel(0x94000174, regs + MVEBU_LCD_CLK_CFG_0);
 
 	/*
 	 * Set the LCD_CFG_SCLK_DIV Register
@@ -437,7 +462,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001
 	 * See page 475 in section 28.5.
 	 */
-	writel(0x80000001, MVEBU_LCD_CFG_SCLK_DIV);
+	writel(0x80000001, regs + MVEBU_LCD_CFG_SCLK_DIV);
 
 	/*
 	 * Set the LCD Clock Configuration 0 Register:
@@ -452,7 +477,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 *             N=28=0x1C => 0x1B
 	 * Bits 03-00: R1_CTRL (for N=28 => 0x4)
 	 */
-	writel(0x940021B4, MVEBU_LCD_CLK_CFG_0);
+	writel(0x940021B4, regs + MVEBU_LCD_CLK_CFG_0);
 
 	/*
 	 * Set the LCD Clock Configuration 1 Register:
@@ -465,7 +490,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider
 	 *             M' for LVDS=7!]
 	 */
-	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
+	writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
 
 	/*
 	 * Set the LVDS Clock Configuration Register:
@@ -479,12 +504,12 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	 * Note: Bits 0 and must be verified with the help of the
 	 *       Interface/display
 	 */
-	writel(0xC0000201, MVEBU_LCD_LVDS_CLK_CFG);
+	writel(0xC0000201, regs + MVEBU_LCD_LVDS_CLK_CFG);
 
 	/*
 	 * Power up PLL (Clock Config 0)
 	 */
-	writel(0x140021B4, MVEBU_LCD_CLK_CFG_0);
+	writel(0x140021B4, regs + MVEBU_LCD_CLK_CFG_0);
 
 	/* wait 10 ms */
 	mdelay(10);
@@ -492,40 +517,78 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
 	/*
 	 * Enable PLL (Clock Config 1)
 	 */
-	writel(0x8FF60007, MVEBU_LCD_CLK_CFG_1);
-
-	return 0;
+	writel(0x8FF60007, regs + MVEBU_LCD_CLK_CFG_1);
 }
 
-int __weak board_video_init(void)
+static int mvebu_video_probe(struct udevice *dev)
 {
-	return -1;
-}
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct mvebu_video_priv *priv = dev_get_priv(dev);
+	struct mvebu_lcd_info lcd_info;
+	struct display_timing timings;
+	u32 fb_start, fb_end;
+	int ret;
+
+	priv->regs = dev_read_addr(dev);
+	if (priv->regs == FDT_ADDR_T_NONE) {
+		dev_err(dev, "failed to get LCD address\n");
+		return -ENXIO;
+	}
 
-void *video_hw_init(void)
-{
-	static GraphicDevice mvebufb;
-	GraphicDevice *pGD = &mvebufb;
-	u32 val;
+	ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, &timings);
+	if (ret) {
+		dev_err(dev, "failed to get any display timings\n");
+		return -EINVAL;
+	}
 
-	/*
-	 * The board code needs to call mvebu_lcd_register_init()
-	 * in its board_video_init() implementation, with the board
-	 * specific parameters for its LCD.
-	 */
-	if (board_video_init() || !readl(MVEBU_LCD_CFG_GRA_START_ADDR0))
-		return NULL;
+	/* Use DT timing (resolution) in internal info struct */
+	lcd_info.fb_base = plat->base;
+	lcd_info.x_res = timings.hactive.typ;
+	lcd_info.x_fp = timings.hfront_porch.typ;
+	lcd_info.x_bp = timings.hback_porch.typ;
+	lcd_info.y_res = timings.vactive.typ;
+	lcd_info.y_fp = timings.vfront_porch.typ;
+	lcd_info.y_bp = timings.vback_porch.typ;
+
+	/* Initialize the LCD controller */
+	mvebu_lcd_register_init(&lcd_info, priv->regs);
+
+	/* Enable dcache for the frame buffer */
+	fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
+	fb_end = plat->base + plat->size;
+	fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
+	mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
+					DCACHE_WRITEBACK);
+	video_set_flush_dcache(dev, true);
+
+	uc_priv->xsize = lcd_info.x_res;
+	uc_priv->ysize = lcd_info.y_res;
+	uc_priv->bpix = VIDEO_BPP16;	/* Uses RGB555 format */
+
+	return 0;
+}
 
-	/* Provide the necessary values for the U-Boot video IF */
-	val = readl(MVEBU_LCD_SPU_V_H_ACTIVE);
-	pGD->winSizeY = val >> 16;
-	pGD->winSizeX = val & 0x0000ffff;
-	pGD->gdfBytesPP = 2;
-	pGD->gdfIndex = GDF_15BIT_555RGB;
-	pGD->frameAdrs = readl(MVEBU_LCD_CFG_GRA_START_ADDR0);
+static int mvebu_video_bind(struct udevice *dev)
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
 
-	debug("LCD: buffer at 0x%08x resolution %dx%d\n", pGD->frameAdrs,
-	      pGD->winSizeX, pGD->winSizeY);
+	plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+		(1 << LCD_MAX_LOG2_BPP) / 8;
 
-	return pGD;
+	return 0;
 }
+
+static const struct udevice_id mvebu_video_ids[] = {
+	{ .compatible = "marvell,armada-xp-lcd" },
+	{ }
+};
+
+U_BOOT_DRIVER(mvebu_video) = {
+	.name	= "mvebu_video",
+	.id	= UCLASS_VIDEO,
+	.of_match = mvebu_video_ids,
+	.bind	= mvebu_video_bind,
+	.probe	= mvebu_video_probe,
+	.priv_auto_alloc_size = sizeof(struct mvebu_video_priv),
+};
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 77ab6caf52..f9510826d7 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -55,7 +55,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index b38cab1164..06c93c3e66 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -63,9 +63,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index e68246cc0f..626a406cff 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -34,7 +34,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 3900cbed2d..1f328e97c5 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -59,7 +59,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index 8ad007cc49..6cba326927 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -46,7 +46,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index b9b708ad41..4ba050553a 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -41,7 +41,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 2526a00084..886456ec26 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -62,16 +62,13 @@
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 
-/* PCIe support */
-#ifdef CONFIG_CMD_PCI
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#endif
-#endif
-
 /* Enable LCD and reserve 512KB from top of memory*/
 #define CONFIG_SYS_MEM_TOP_HIDE		0x80000
 
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+
 /* FPGA programming support */
 #define CONFIG_FPGA_STRATIX_V
 
diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 598674c96e..710b8991a4 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -66,7 +66,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/configs/x530.h b/include/configs/x530.h
index a1ef301d35..a83d49ba35 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -75,7 +75,6 @@
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
diff --git a/include/pci.h b/include/pci.h
index 785d7d28b7..041f8e3747 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -1560,6 +1560,16 @@ struct dm_pci_emul_ops {
 int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
 			 struct udevice **containerp, struct udevice **emulp);
 
+/**
+ * pci_get_devfn() - Extract the devfn from fdt_pci_addr of the device
+ *
+ * Get devfn from fdt_pci_addr of the specifified device
+ *
+ * @dev:	PCI device
+ * @return devfn in bits 15...8 if found, -ENODEV if not found
+ */
+int pci_get_devfn(struct udevice *dev);
+
 #endif /* CONFIG_DM_PCI */
 
 /**
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index b425cc360f..f7f30d15ae 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1443,7 +1443,6 @@ CONFIG_PCI_MEM_BUS
 CONFIG_PCI_MEM_PHYS
 CONFIG_PCI_MEM_SIZE
 CONFIG_PCI_MSC01
-CONFIG_PCI_MVEBU
 CONFIG_PCI_NOSCAN
 CONFIG_PCI_OHCI
 CONFIG_PCI_OHCI_DEVNO