Merge branch 'master' of git://git.denx.de/u-boot-sunxi

47 files changed, 490 insertions, 331 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 1c4b7633f9..48db7442f4 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -15,8 +15,10 @@ obj-y	+= pinmux.o
 obj-y	+= usbc.o
 obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
 obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
 obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
 obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
 obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
diff --git a/arch/arm/cpu/armv7/sunxi/rsb.c b/arch/arm/cpu/armv7/sunxi/rsb.c
index b72bb9db51..b00befb301 100644
--- a/arch/arm/cpu/armv7/sunxi/rsb.c
+++ b/arch/arm/cpu/armv7/sunxi/rsb.c
@@ -16,14 +16,27 @@
 #include <asm/arch/prcm.h>
 #include <asm/arch/rsb.h>
 
+static int rsb_set_device_mode(void);
+
 static void rsb_cfg_io(void)
 {
+#ifdef CONFIG_MACH_SUN8I
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL0_R_RSB_SCK);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL1_R_RSB_SDA);
 	sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
 	sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
 	sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
 	sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
+#elif defined CONFIG_MACH_SUN9I
+	sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN0_R_RSB_SCK);
+	sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN1_R_RSB_SDA);
+	sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
+	sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
+	sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
+	sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
+#else
+#error unsupported MACH_SUNXI
+#endif
 }
 
 static void rsb_set_clk(void)
@@ -42,7 +55,7 @@ static void rsb_set_clk(void)
 	writel((cd_odly << 8) | div, &rsb->ccr);
 }
 
-void rsb_init(void)
+int rsb_init(void)
 {
 	struct sunxi_rsb_reg * const rsb =
 		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
@@ -54,6 +67,8 @@ void rsb_init(void)
 
 	writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
 	rsb_set_clk();
+
+	return rsb_set_device_mode();
 }
 
 static int rsb_await_trans(void)
@@ -88,13 +103,14 @@ static int rsb_await_trans(void)
 	return ret;
 }
 
-int rsb_set_device_mode(u32 device_mode_data)
+static int rsb_set_device_mode(void)
 {
 	struct sunxi_rsb_reg * const rsb =
 		(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
 	unsigned long tmo = timer_get_us() + 1000000;
 
-	writel(RSB_DMCR_DEVICE_MODE_START | device_mode_data, &rsb->dmcr);
+	writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
+	       &rsb->dmcr);
 
 	while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
 		if (timer_get_us() > tmo)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index 05fbad3e11..d297ed0f73 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -305,6 +305,8 @@ struct sunxi_ccm_reg {
 #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
 #define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
 #define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x)	((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	((x) << 10)
 
 #define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index e101c54051..8a803851e4 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -243,6 +243,8 @@ struct sunxi_ccm_reg {
 #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
 #define CCM_GMAC_CTRL_GPIT_MII		(0x0 << 2)
 #define CCM_GMAC_CTRL_GPIT_RGMII	(0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x)	((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	((x) << 10)
 
 #define MDFS_CLK_DEFAULT		0x81000002 /* PLL6 / 3 */
 
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
index a2a7839c6b..04889c51fa 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
@@ -73,7 +73,6 @@
 #define SUNXI_CCM_BASE			(REGS_APB0_BASE + 0x0000)
 #define SUNXI_CCMMODULE_BASE		(REGS_APB0_BASE + 0x0400)
 #define SUNXI_PIO_BASE			(REGS_APB0_BASE + 0x0800)
-#define SUNXI_R_PIO_BASE		(0x08002C00)
 #define SUNXI_TIMER_BASE		(REGS_APB0_BASE + 0x0C00)
 #define SUNXI_PWM_BASE			(REGS_APB0_BASE + 0x1400)
 #define SUNXI_LRADC_BASE		(REGS_APB0_BASE + 0x1800)
@@ -92,8 +91,10 @@
 #define SUNXI_TWI4_BASE			(REGS_APB1_BASE + 0x3800)
 
 /* RCPUS Module */
-#define SUNXI_RPRCM_BASE		(REGS_RCPUS_BASE + 0x1400)
+#define SUNXI_PRCM_BASE			(REGS_RCPUS_BASE + 0x1400)
 #define SUNXI_R_UART_BASE		(REGS_RCPUS_BASE + 0x2800)
+#define SUNXI_R_PIO_BASE		(REGS_RCPUS_BASE + 0x2c00)
+#define SUNXI_RSB_BASE			(REGS_RCPUS_BASE + 0x3400)
 
 /* Misc. */
 #define SUNXI_BROM_BASE			0xFFFF0000 /* 32K */
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 71cc879c2b..f2c247d79f 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -45,9 +45,13 @@
  *
  * sun8i has 1 bank:
  * PL0 - PL11
+ *
+ * sun9i has 3 banks:
+ * PL0 - PL9  | PM0 - PM15  | PN0 - PN1
  */
 #define SUNXI_GPIO_L	11
 #define SUNXI_GPIO_M	12
+#define SUNXI_GPIO_N	13
 
 struct sunxi_gpio {
 	u32 cfg[4];
@@ -114,6 +118,7 @@ enum sunxi_gpio_number {
 	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
 	SUNXI_GPIO_L_START = 352,
 	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
+	SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M),
 	SUNXI_GPIO_AXP0_START = 1024,
 };
 
@@ -129,6 +134,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
 #define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
 #define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
+#define SUNXI_GPN(_nr)	(SUNXI_GPIO_N_START + (_nr))
 
 #define SUNXI_GPAXP0(_nr)	(SUNXI_GPIO_AXP0_START + (_nr))
 
@@ -187,6 +193,9 @@ enum sunxi_gpio_number {
 #define SUN8I_GPL2_R_UART_TX	2
 #define SUN8I_GPL3_R_UART_RX	2
 
+#define SUN9I_GPN0_R_RSB_SCK	3
+#define SUN9I_GPN1_R_RSB_SDA    3
+
 /* GPIO pin pull-up/down config */
 #define SUNXI_GPIO_PULL_DISABLE	0
 #define SUNXI_GPIO_PULL_UP	1
diff --git a/arch/arm/include/asm/arch-sunxi/rsb.h b/arch/arm/include/asm/arch-sunxi/rsb.h
index 95a595ab8d..a8934667c4 100644
--- a/arch/arm/include/asm/arch-sunxi/rsb.h
+++ b/arch/arm/include/asm/arch-sunxi/rsb.h
@@ -37,6 +37,7 @@ struct sunxi_rsb_reg {
 #define RSB_STAT_TERR_INT		(1 << 1)
 #define RSB_STAT_LBSY_INT		(1 << 2)
 
+#define RSB_DMCR_DEVICE_MODE_DATA	0x7c3e00
 #define RSB_DMCR_DEVICE_MODE_START	(1 << 31)
 
 #define RSB_CMD_BYTE_WRITE		0x4e
@@ -46,8 +47,7 @@ struct sunxi_rsb_reg {
 #define RSB_DEVADDR_RUNTIME_ADDR(x)	((x) << 16)
 #define RSB_DEVADDR_DEVICE_ADDR(x)	((x) << 0)
 
-void rsb_init(void);
-int rsb_set_device_mode(u32 device_mode_data);
+int rsb_init(void);
 int rsb_set_device_address(u16 device_addr, u16 runtime_addr);
 int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data);
 int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data);
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 738b55e74a..4a2158988f 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -39,16 +39,23 @@ config DRAM_CLK
 	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	---help---
 	Set the dram clock speed, valid range 240 - 480, must be a multiple
-	of 24. Note on sun4i / sun5i / sun7i this is only used by boards
-	which use dram autoconfig.
+	of 24.
+
+if MACH_SUN5I || MACH_SUN7I
+config DRAM_MBUS_CLK
+	int "sunxi mbus clock speed"
+	default 300
+	---help---
+	Set the mbus clock speed. The maximum on sun5i hardware is 300MHz.
+
+endif
 
 config DRAM_ZQ
 	int "sunxi dram zq value"
 	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
 	default 127 if MACH_SUN7I
 	---help---
-	Set the dram zq value. Note on sun4i / sun5i / sun7i this is only
-	used by boards which use dram autoconfig.
+	Set the dram zq value.
 
 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 config DRAM_EMR1
@@ -56,98 +63,81 @@ config DRAM_EMR1
 	default 0 if MACH_SUN4I
 	default 4 if MACH_SUN5I || MACH_SUN7I
 	---help---
-	Set the dram controller emr1 value. Note this is only used by boards
-	which use dram autoconfig.
-endif
-
-config SYS_CONFIG_NAME
-	default "sun4i" if MACH_SUN4I
-	default "sun5i" if MACH_SUN5I
-	default "sun6i" if MACH_SUN6I
-	default "sun7i" if MACH_SUN7I
-	default "sun8i" if MACH_SUN8I
-
-choice
-	prompt "Board"
-
-config TARGET_A10S_OLINUXINO_M
-	bool "A10S_OLINUXINO_M"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINOM
-	bool "A13_OLINUXINOM"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINO
-	bool "A13_OLINUXINO"
-	depends on MACH_SUN5I
-
-config TARGET_A20_OLINUXINO_L2
-	bool "A20_OLINUXINO_L2"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_L
-	bool "A20_OLINUXINO_L"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_M
-	bool "A20_OLINUXINO_M"
-	depends on MACH_SUN7I
-
-config TARGET_AUXTEK_T004
-	bool "AUXTEK_T004"
-	depends on MACH_SUN5I
-
-config TARGET_BANANAPI
-	bool "BANANAPI"
-	depends on MACH_SUN7I
-
-config TARGET_BANANAPRO
-	bool "BANANAPRO"
-	depends on MACH_SUN7I
+	Set the dram controller emr1 value.
 
-config TARGET_CUBIEBOARD2
-	bool "CUBIEBOARD2"
-	depends on MACH_SUN7I
-
-config TARGET_CUBIETRUCK
-	bool "CUBIETRUCK"
-	depends on MACH_SUN7I
+config DRAM_ODT_EN
+	int "sunxi dram odt_en value"
+	default 0
+	---help---
+	Set the dram controller odt_en parameter. This can be used to
+	enable/disable the ODT feature.
 
-config TARGET_PCDUINO3
-	bool "PCDUINO3"
-	depends on MACH_SUN7I
+config DRAM_TPR3
+	hex "sunxi dram tpr3 value"
+	default 0
+	---help---
+	Set the dram controller tpr3 parameter. This parameter configures
+	the delay on the command lane and also phase shifts, which are
+	applied for sampling incoming read data. The default value 0
+	means that no phase/delay adjustments are necessary. Properly
+	configuring this parameter increases reliability at high DRAM
+	clock speeds.
+
+config DRAM_DQS_GATING_DELAY
+	hex "sunxi dram dqs_gating_delay value"
+	default 0
+	---help---
+	Set the dram controller dqs_gating_delay parmeter. Each byte
+	encodes the DQS gating delay for each byte lane. The delay
+	granularity is 1/4 cycle. For example, the value 0x05060606
+	means that the delay is 5 quarter-cycles for one lane (1.25
+	cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes.
+	The default value 0 means autodetection. The results of hardware
+	autodetection are not very reliable and depend on the chip
+	temperature (sometimes producing different results on cold start
+	and warm reboot). But the accuracy of hardware autodetection
+	is usually good enough, unless running at really high DRAM
+	clocks speeds (up to 600MHz). If unsure, keep as 0.
 
-config TARGET_MELE_M3
-	bool "MELE_M3"
-	depends on MACH_SUN7I
+choice
+	prompt "sunxi dram timings"
+	default DRAM_TIMINGS_VENDOR_MAGIC
+	---help---
+	Select the timings of the DDR3 chips.
 
-config TARGET_MK802_A10S
-	bool "MK802_A10S"
-	depends on MACH_SUN5I
+config DRAM_TIMINGS_VENDOR_MAGIC
+	bool "Magic vendor timings from Android"
+	---help---
+	The same DRAM timings as in the Allwinner boot0 bootloader.
 
-config TARGET_MSI_PRIMO73
-	bool "MSI Primo73 (7\" tablet)"
-	depends on MACH_SUN7I
+config DRAM_TIMINGS_DDR3_1066F_1333H
+	bool "JEDEC DDR3-1333H with down binning to DDR3-1066F"
+	---help---
+	Use the timings of the standard JEDEC DDR3-1066F speed bin for
+	DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin
+	for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips
+	used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333
+	or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm
+	that down binning to DDR3-1066F is supported (because DDR3-1066F
+	uses a bit faster timings than DDR3-1333H).
+
+config DRAM_TIMINGS_DDR3_800E_1066G_1333J
+	bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J"
 	---help---
-	The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
-	1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-	rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
-	and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-	(both volume buttons are also connected to the UBOOT_SEL pin). The
-	external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-	OTG and 3.5mm headphone jack. More details are available at
-	    http://linux-sunxi.org/MSI_Primo73
+	Use the timings of the slowest possible JEDEC speed bin for the
+	selected DRAM_CLK. Depending on the DRAM_CLK value, it may be
+	DDR3-800E, DDR3-1066G or DDR3-1333J.
 
-config TARGET_I12_TVBOX
-	bool "I12_TVBOX"
-	depends on MACH_SUN7I
+endchoice
 
-config TARGET_R7DONGLE
-	bool "R7DONGLE"
-	depends on MACH_SUN5I
+endif
 
-endchoice
+config SYS_CONFIG_NAME
+	default "sun4i" if MACH_SUN4I
+	default "sun5i" if MACH_SUN5I
+	default "sun6i" if MACH_SUN6I
+	default "sun7i" if MACH_SUN7I
+	default "sun8i" if MACH_SUN8I
 
 config SYS_BOARD
 	default "sunxi"
@@ -270,6 +260,16 @@ config VIDEO_VGA_VIA_LCD
 	LCD interface driving a VGA connector, such as found on the
 	Olimex A13 boards.
 
+config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	boolean "Force sync active high for VGA via LCD controller support"
+	depends on VIDEO_VGA_VIA_LCD
+	default n
+	---help---
+	Say Y here if you've a board which uses opendrain drivers for the vga
+	hsync and vsync signals. Opendrain drivers cannot generate steep enough
+	positive edges for a stable video output, so on boards with opendrain
+	drivers the sync signals must always be active high.
+
 config VIDEO_VGA_EXTERNAL_DAC_EN
 	string "LCD panel power enable pin"
 	depends on VIDEO_VGA_VIA_LCD
@@ -383,4 +383,10 @@ config USB_KEYBOARD
 	Say Y here to add support for using a USB keyboard (typically used
 	in combination with a graphical console).
 
+config GMAC_TX_DELAY
+	int "GMAC Transmit Clock Delay Chain"
+	default 0
+	---help---
+	Set the GMAC Transmit Clock Delay Chain value.
+
 endif
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 743e7f5351..faa413cb06 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -34,16 +34,6 @@ F:	configs/qt840a_defconfig
 F:	include/configs/sun8i.h
 F:	configs/Ippo_q8h_v1_2_defconfig
 
-CUBIEBOARD2 BOARD
-M:	Ian Campbell <ijc@hellion.org.uk>
-M:	Hans de Goede <hdegoede@redhat.com>
-S:	Maintained
-F:	include/configs/sun7i.h
-F:	configs/Cubieboard2_defconfig
-F:	configs/Cubieboard2_FEL_defconfig
-F:	configs/Cubietruck_defconfig
-F:	configs/Cubietruck_FEL_defconfig
-
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>
 S:	Maintained
@@ -61,36 +51,47 @@ M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
 F:	configs/Colombus_defconfig
 
+CUBIEBOARD2 BOARD
+M:	Ian Campbell <ijc@hellion.org.uk>
+M:	Hans de Goede <hdegoede@redhat.com>
+S:	Maintained
+F:	include/configs/sun7i.h
+F:	configs/Cubieboard2_defconfig
+F:	configs/Cubieboard2_FEL_defconfig
+F:	configs/Cubietruck_defconfig
+F:	configs/Cubietruck_FEL_defconfig
+
 GEMEI-G9 TABLET
-M: Priit Laes <plaes@plaes.org>
-S: Maintained
-F: configs/sunxi_Gemei_G9_defconfig
+M:	Priit Laes <plaes@plaes.org>
+S:	Maintained
+F:	configs/sunxi_Gemei_G9_defconfig
 
-HUMMINIGBIRD-A31 BOARD
+HUMMINGBIRD-A31 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Hummingbird_A31_defconfig
 
+INET-86VS BOARD
+M:	Michal Suchanek <hramrach@gmail.com>
+S:	Maintained
+F:	board/sunxi/dram_inet_86vs.c
+F:	configs/Inet_86VS_defconfig
+
 IPPO-Q8H-V5 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Ippo_q8h_v5_defconfig
 
-MSI-PRIMO73 BOARD
-M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
-S:	Maintained
-F:	configs/MSI_Primo73_defconfig
-
-MSI-PRIMO81 BOARD
-M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
-S:	Maintained
-F:	configs/MSI_Primo81_defconfig
-
 LINKSPRITE-PCDUINO BOARD
 M:	Zoltan Herpai <wigyori@uid0.hu>
 S:	Maintained
 F:	configs/Linksprite_pcDuino_defconfig
 
+LINKSPRITE-PCDUINO3-NANO BOARD
+M:	Adam Sampson <ats@offog.org>
+S:	Maintained
+F:	configs/Linksprite_pcDuino3_Nano_defconfig
+
 MARSBOARD-A10 BOARD
 M:	Aleksei Mamlin <mamlinav@gmail.com>
 S:	Maintained
@@ -100,3 +101,18 @@ MELE M5 BOARD
 M:	Ian Campbell <ijc@hellion.org.uk>
 S:	Maintained
 F:	configs/Mele_M5_defconfig
+
+MSI-PRIMO73 BOARD
+M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
+S:	Maintained
+F:	configs/MSI_Primo73_defconfig
+
+MSI-PRIMO81 BOARD
+M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
+S:	Maintained
+F:	configs/MSI_Primo81_defconfig
+
+TZX-Q8-713B7 BOARD
+M:	Paul Kocialkowski <contact@paulk.fr>
+S:	Maintained
+F:	configs/TZX-Q8-713B7_defconfig
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 71edb83c5d..43766e0ef4 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -12,11 +12,5 @@ obj-y	+= board.o
 obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
 obj-$(CONFIG_SUNXI_AHCI)	+= ahci.o
 obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun5i_auto.o
 obj-$(CONFIG_MACH_SUN7I)	+= dram_sun5i_auto.o
-obj-$(CONFIG_TARGET_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_A13_OLINUXINO)	+= dram_a13_olinuxino.o
-obj-$(CONFIG_TARGET_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
-# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_MK802_A10S)		+= dram_sun5i_auto.o
-obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
diff --git a/board/sunxi/dram_a10s_olinuxino_m.c b/board/sunxi/dram_a10s_olinuxino_m.c
deleted file mode 100644
index 8900539e7f..0000000000
--- a/board/sunxi/dram_a10s_olinuxino_m.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_oli_micro.c b/board/sunxi/dram_a13_oli_micro.c
deleted file mode 100644
index 8154ea2ca9..0000000000
--- a/board/sunxi/dram_a13_oli_micro.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 256,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_olinuxino.c b/board/sunxi/dram_a13_olinuxino.c
deleted file mode 100644
index ca96260250..0000000000
--- a/board/sunxi/dram_a13_olinuxino.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
deleted file mode 100644
index 0ed7943043..0000000000
--- a/board/sunxi/dram_bananapi.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0x0,
-	.tpr4 = 0x1,
-	.tpr5 = 0x0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_r7dongle.c b/board/sunxi/dram_r7dongle.c
deleted file mode 100644
index 59343cb2a5..0000000000
--- a/board/sunxi/dram_r7dongle.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x04,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
index 826bacf94a..09e0c9ae2e 100644
--- a/board/sunxi/dram_sun4i_auto.c
+++ b/board/sunxi/dram_sun4i_auto.c
@@ -8,19 +8,25 @@ static struct dram_para dram_para = {
 	.density = 0,
 	.io_width = 0,
 	.bus_width = 0,
-	.cas = 6,
 	.zq = CONFIG_DRAM_ZQ,
-	.odt_en = 0,
+	.odt_en = CONFIG_DRAM_ODT_EN,
 	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 6,
 	.tpr0 = 0x30926692,
 	.tpr1 = 0x1090,
 	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
+	.emr2 = 0,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
+	.tpr3 = CONFIG_DRAM_TPR3,
 	.tpr4 = 0,
 	.tpr5 = 0,
 	.emr1 = CONFIG_DRAM_EMR1,
-	.emr2 = 0,
 	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
 };
 
 unsigned long sunxi_dram_init(void)
diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
index e86b08e67b..e52d54c32e 100644
--- a/board/sunxi/dram_sun5i_auto.c
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -5,24 +5,31 @@
 
 static struct dram_para dram_para = {
 	.clock = CONFIG_DRAM_CLK,
+	.mbus_clock = CONFIG_DRAM_MBUS_CLK,
 	.type = 3,
 	.rank_num = 1,
 	.density = 0,
 	.io_width = 0,
 	.bus_width = 0,
-	.cas = 9,
 	.zq = CONFIG_DRAM_ZQ,
-	.odt_en = 0,
+	.odt_en = CONFIG_DRAM_ODT_EN,
 	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 9,
 	.tpr0 = 0x42d899b7,
 	.tpr1 = 0xa090,
 	.tpr2 = 0x22a00,
+	.emr2 = 0x10,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
 	.tpr3 = 0,
 	.tpr4 = 0,
 	.tpr5 = 0,
 	.emr1 = CONFIG_DRAM_EMR1,
-	.emr2 = 0x10,
 	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
 };
 
 unsigned long sunxi_dram_init(void)
diff --git a/board/sunxi/dram_timings_sun4i.h b/board/sunxi/dram_timings_sun4i.h
new file mode 100644
index 0000000000..29b934da63
--- /dev/null
+++ b/board/sunxi/dram_timings_sun4i.h
@@ -0,0 +1,205 @@
+/* This file is automatically generated, do not edit */
+
+#if defined(CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-1066F @360MHz, timings: 6-5-5-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e5590,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-1066F @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x288f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-1066F @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066F @408MHz, timings: 7-6-6-16 */
+	.cas  = 7,
+	.tpr0 = 0x2ab06690,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066F @432MHz, timings: 7-6-6-17 */
+	.cas  = 7,
+	.tpr0 = 0x2cb16690,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066F @456MHz, timings: 7-6-6-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b26690,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066F @468MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066F @480MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x32b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066F @504MHz, timings: 7-7-7-19 */
+	.cas  = 7,
+	.tpr0 = 0x34d37790,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066F @528MHz, timings: 7-7-7-20 */
+	.cas  = 7,
+	.tpr0 = 0x36d47790,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333H @540MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x36b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333H @552MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x38b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333H @576MHz, timings: 9-8-8-21 */
+	.cas  = 9,
+	.tpr0 = 0x3ab588b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333H @600MHz, timings: 9-9-9-22 */
+	.cas  = 9,
+	.tpr0 = 0x3cb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333H @624MHz, timings: 9-9-9-23 */
+	.cas  = 9,
+	.tpr0 = 0x3eb799b4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333H @648MHz, timings: 9-9-9-24 */
+	.cas  = 9,
+	.tpr0 = 0x42b899b4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#elif defined(CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-800E @360MHz, timings: 6-6-6-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e6690,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-800E @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-800E @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066G @408MHz, timings: 8-7-7-16 */
+	.cas  = 8,
+	.tpr0 = 0x2cb07790,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066G @432MHz, timings: 8-7-7-17 */
+	.cas  = 8,
+	.tpr0 = 0x2eb17790,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066G @456MHz, timings: 8-7-7-18 */
+	.cas  = 8,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066G @468MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x32b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066G @480MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x34b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066G @504MHz, timings: 8-8-8-19 */
+	.cas  = 8,
+	.tpr0 = 0x36d38890,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066G @528MHz, timings: 8-8-8-20 */
+	.cas  = 8,
+	.tpr0 = 0x38d48890,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333J @540MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x38b499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333J @552MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x3ab499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333J @576MHz, timings: 10-9-9-21 */
+	.cas  = 10,
+	.tpr0 = 0x3cb599b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333J @600MHz, timings: 10-9-9-22 */
+	.cas  = 10,
+	.tpr0 = 0x3eb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333J @624MHz, timings: 10-10-10-23 */
+	.cas  = 10,
+	.tpr0 = 0x40b7aab4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333J @648MHz, timings: 10-10-10-24 */
+	.cas  = 10,
+	.tpr0 = 0x44b8aab4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#else
+# error CONFIG_DRAM_TIMINGS_* is not defined
+#endif
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index 4e4615e12f..8849132627 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -24,20 +24,13 @@ int sunxi_gmac_initialize(bd_t *bis)
 #ifdef CONFIG_RGMII
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
 		CCM_GMAC_CTRL_GPIT_RGMII);
+	setbits_le32(&ccm->gmac_clk_cfg,
+		     CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
 #else
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
 		CCM_GMAC_CTRL_GPIT_MII);
 #endif
 
-	/*
-	 * In order for the gmac nic to work reliable on the Bananapi, we
-	 * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain"
-	 * of the GMAC clk register to 3.
-	 */
-#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO
-	setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
-#endif
-
 #ifndef CONFIG_MACH_SUN6I
 	/* Configure pin mux settings for GMAC */
 	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index 94fafa6b97..b5f0a0f782 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -8,4 +8,6 @@ CONFIG_USB1_VBUS_PIN="PB10"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_A10S_OLINUXINO_M=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index 1a994180b5..a04f2b3362 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -4,6 +4,7 @@ CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
+CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 # For use with the Olimex 7" LCD module, adjust timings for other displays
 # Set video-mode=sunxi:800x600-24@60,monitor=lcd in the env. to enable
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
@@ -12,4 +13,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_A13_OLINUXINOM=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 7df69517f6..806d5b7bd5 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -4,6 +4,7 @@ CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
+CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 # For use with the Olimex 7" LCD module, adjust timings for other displays
 # Set video-mode=sunxi:800x600-24@60,monitor=lcd in the env. to enable
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
@@ -12,4 +13,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_A13_OLINUXINO=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 17fd19da8f..ff94e77200 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_A20_OLINUXINO_L2=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index c8243a4ae8..5442f645f8 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_A20_OLINUXINO_L=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index ac94c79086..97a21ee534 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -8,7 +8,6 @@ CONFIG_VIDEO_VGA=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_A20_OLINUXINO_M=y
 +S:CONFIG_DRAM_CLK=384
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 7fe9059179..03ec3dbdc4 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -5,4 +5,6 @@ CONFIG_USB1_VBUS_PIN="PG13"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_AUXTEK_T004=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index d94e08e0eb..5aba938276 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -1,10 +1,10 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-bananapi.dtb"
+CONFIG_GMAC_TX_DELAY=3
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_BANANAPI=y
 +S:CONFIG_DRAM_CLK=432
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 02e4f3e9fe..e501b5c95c 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -3,10 +3,10 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHC
 CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"
 CONFIG_USB1_VBUS_PIN="PH0"
 CONFIG_USB2_VBUS_PIN="PH1"
+CONFIG_GMAC_TX_DELAY=3
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_BANANAPRO=y
 +S:CONFIG_DRAM_CLK=432
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index ef5b43aada..7704a0ef81 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_CUBIEBOARD2=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index f51c491af2..b64f84f2b8 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -5,7 +5,6 @@ CONFIG_VIDEO_VGA=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_CUBIETRUCK=y
 +S:CONFIG_DRAM_CLK=432
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 60eb03ef26..204640ee24 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -6,7 +6,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 CONFIG_FDTFILE="sun4i-a10-hyundai-a7hd.dtb"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB09"
-CONFIG_USB2_VBUS_PIN=""
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN="PH6"
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:45,ri:274,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=1
 CONFIG_VIDEO_LCD_POWER="PH2"
diff --git a/configs/Inet_86VS_defconfig b/configs/Inet_86VS_defconfig
new file mode 100644
index 0000000000..ce9985affe
--- /dev/null
+++ b/configs/Inet_86VS_defconfig
@@ -0,0 +1,15 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_FDTFILE="sun5i-a13-inet-86vs.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index c894948d88..4786202e16 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -11,7 +11,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PH0"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN8I=y
-+S:CONFIG_TARGET_IPPO_Q8H_V5=y
 +S:CONFIG_DRAM_CLK=480
 # zq = 0xf777
 +S:CONFIG_DRAM_ZQ=63351
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
new file mode 100644
index 0000000000..4baba14bf0
--- /dev/null
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -0,0 +1,11 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb"
+CONFIG_GMAC_TX_DELAY=3
+CONFIG_USB1_VBUS_PIN="PH11"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=122
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 64e01c8ffd..45d88f3015 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_PCDUINO3=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig
index 49718c798c..3b6dfa6fa6 100644
--- a/configs/Linksprite_pcDuino3_fdt_defconfig
+++ b/configs/Linksprite_pcDuino3_fdt_defconfig
@@ -8,7 +8,6 @@ CONFIG_OF_SEPARATE=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_PCDUINO3=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 6628184cb7..c6fb7e65d0 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -1,3 +1,11 @@
+# The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
+# 1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
+# rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
+# and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
+# (both volume buttons are also connected to the UBOOT_SEL pin). The
+# external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
+# OTG and 3.5mm headphone jack. More details are available at
+#    http://linux-sunxi.org/MSI_Primo73
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 CONFIG_FDTFILE="sun7i-a20-primo73.dtb"
@@ -10,7 +18,6 @@ CONFIG_USB_KEYBOARD=n
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_MSI_PRIMO73=y
 +S:CONFIG_DRAM_CLK=384
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 7f1710adad..723a72a2ef 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -7,7 +7,6 @@ CONFIG_VIDEO_VGA=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_MELE_M3=y
 +S:CONFIG_DRAM_CLK=384
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
new file mode 100644
index 0000000000..7b7b9ddf8e
--- /dev/null
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -0,0 +1,15 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
+CONFIG_FDTFILE="sun5i-a13-tzx-q8-713b7.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_DRAM_CLK=408
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index 65791b7dc1..41192fc73f 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -4,7 +4,6 @@ CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN7I=y
-+S:CONFIG_TARGET_I12_TVBOX=y
 +S:CONFIG_DRAM_CLK=384
 +S:CONFIG_DRAM_ZQ=127
 +S:CONFIG_DRAM_EMR1=4
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index 086e1e4fa8..cafcbaa62e 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -5,7 +5,6 @@ CONFIG_USB1_VBUS_PIN="PB10"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_MK802_A10S=y
 +S:CONFIG_DRAM_CLK=432
 +S:CONFIG_DRAM_ZQ=123
 +S:CONFIG_DRAM_EMR1=0
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index b9fd59c16a..e99e57d505 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -5,4 +5,6 @@ CONFIG_USB1_VBUS_PIN="PG13"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_TARGET_R7DONGLE=y
++S:CONFIG_DRAM_CLK=384
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=4
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 510479516b..ebfec7cf07 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -215,7 +215,7 @@ static int mmc_config_clock(struct mmc *mmc)
 	return 0;
 }
 
-static void mmc_set_ios(struct mmc *mmc)
+static void sunxi_mmc_set_ios(struct mmc *mmc)
 {
 	struct sunxi_mmc_host *mmchost = mmc->priv;
 
@@ -237,7 +237,7 @@ static void mmc_set_ios(struct mmc *mmc)
 		writel(0x0, &mmchost->reg->width);
 }
 
-static int mmc_core_init(struct mmc *mmc)
+static int sunxi_mmc_core_init(struct mmc *mmc)
 {
 	struct sunxi_mmc_host *mmchost = mmc->priv;
 
@@ -298,8 +298,8 @@ static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
 	return 0;
 }
 
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
+static int sunxi_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			      struct mmc_data *data)
 {
 	struct sunxi_mmc_host *mmchost = mmc->priv;
 	unsigned int cmdval = SUNXI_MMC_CMD_START;
@@ -432,9 +432,9 @@ static int sunxi_mmc_getcd(struct mmc *mmc)
 }
 
 static const struct mmc_ops sunxi_mmc_ops = {
-	.send_cmd	= mmc_send_cmd,
-	.set_ios	= mmc_set_ios,
-	.init		= mmc_core_init,
+	.send_cmd	= sunxi_mmc_send_cmd,
+	.set_ios	= sunxi_mmc_set_ios,
+	.init		= sunxi_mmc_core_init,
 	.getcd		= sunxi_mmc_getcd,
 };
 
diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
index 58bbd45a02..3e07f23c20 100644
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -29,9 +29,7 @@ static int pmic_bus_init(void)
 #else
 	int ret;
 
-	rsb_init();
-
-	ret = rsb_set_device_mode(AXP223_DEVICE_MODE_DATA);
+	ret = rsb_init();
 	if (ret)
 		return ret;
 
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index af728b51c7..f5f24fc020 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -645,7 +645,8 @@ static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode)
 	return (delay > 30) ? 30 : delay;
 }
 
-static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
+static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
+				      bool for_ext_vga_dac)
 {
 	struct sunxi_lcdc_reg * const lcdc =
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
@@ -719,6 +720,11 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
 		val |= SUNXI_LCDC_TCON_HSYNC_MASK;
 	if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
 		val |= SUNXI_LCDC_TCON_VSYNC_MASK;
+
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	if (for_ext_vga_dac)
+		val = 0;
+#endif
 	writel(val, &lcdc->tcon0_io_polarity);
 
 	writel(0, &lcdc->tcon0_io_tristate);
@@ -1015,7 +1021,7 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 			hitachi_tx18d42vm_init();
 		}
 		sunxi_composer_mode_set(mode, address);
-		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_lcdc_tcon0_mode_set(mode, false);
 		sunxi_composer_enable();
 		sunxi_lcdc_enable();
 #ifdef CONFIG_VIDEO_LCD_SSD2828
@@ -1033,7 +1039,7 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 		sunxi_vga_enable();
 #elif defined CONFIG_VIDEO_VGA_VIA_LCD
 		sunxi_composer_mode_set(mode, address);
-		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_lcdc_tcon0_mode_set(mode, true);
 		sunxi_composer_enable();
 		sunxi_lcdc_enable();
 		sunxi_vga_external_dac_enable();
diff --git a/include/axp221.h b/include/axp221.h
index 6f24a617b6..a20e25c2f8 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -12,7 +12,6 @@
 
 #define AXP223_DEVICE_ADDR 0x3a3
 #define AXP223_RUNTIME_ADDR 0x2d
-#define AXP223_DEVICE_MODE_DATA 0x7c3e00
 
 /* Page 0 addresses */
 #define AXP221_CHIP_ID		0x03
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 4a5cab25d4..6cfd7e1489 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -181,7 +181,10 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000	/* 512 KiB */
 
 /* I2C */
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
 #define CONFIG_SPL_I2C_SUPPORT
+#endif
+
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_SYS_I2C_SPEED		400000