ram: rk3399: Add rank detection support

Right now the rk3399 sdram driver assume that the board
has configured with 2 channels, so any possibility to
enable single channel on the same driver will encounter
channel #1 data training failure.

Log:
U-Boot TPL board init
sdram_init: data training failed
rk3399_dmc_init DRAM init failed -5

So, add an algorithm that can capable to compute the active
or configured rank with associated channel like
a) do rank loop to compute the active rank, with associated
   channel numbers
b) then, succeed the data training only for configured channel
c) preserve the rank for given channel
d) do channel loop for setting the active channel
e) if given rank is zero or inactive on the specific channel,
   clear the timings for the associated channel
f) finally, return error if number of channels is zero

Tested in NanoPI-NEO4 since it support single channel sdram
configuration.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
(add PI_READ_GATE_TRAINING for LPDDR3 to support rk3399-evb case)
Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>

1 files changed, 100 insertions, 22 deletions

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 8bbacb5275..9df2f840ab 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -1254,13 +1254,52 @@ static unsigned char calculate_stride(struct rk3399_sdram_params *params)
 	return stride;
 }
 
+static void clear_channel_params(struct rk3399_sdram_params *params, u8 channel)
+{
+	params->ch[channel].cap_info.rank = 0;
+	params->ch[channel].cap_info.col = 0;
+	params->ch[channel].cap_info.bk = 0;
+	params->ch[channel].cap_info.bw = 32;
+	params->ch[channel].cap_info.dbw = 32;
+	params->ch[channel].cap_info.row_3_4 = 0;
+	params->ch[channel].cap_info.cs0_row = 0;
+	params->ch[channel].cap_info.cs1_row = 0;
+	params->ch[channel].cap_info.ddrconfig = 0;
+}
+
+static int pctl_init(struct dram_info *dram, struct rk3399_sdram_params *params)
+{
+	int channel;
+	int ret;
+
+	for (channel = 0; channel < 2; channel++) {
+		const struct chan_info *chan = &dram->chan[channel];
+		struct rk3399_cru *cru = dram->cru;
+		struct rk3399_ddr_publ_regs *publ = chan->publ;
+
+		phy_pctrl_reset(cru, channel);
+		phy_dll_bypass_set(publ, params->base.ddr_freq);
+
+		ret = pctl_cfg(dram, chan, channel, params);
+		if (ret < 0) {
+			printf("%s: pctl config failed\n", __func__);
+			return ret;
+		}
+
+		/* start to trigger initialization */
+		pctl_start(dram, channel);
+	}
+
+	return 0;
+}
+
 static int sdram_init(struct dram_info *dram,
 		      struct rk3399_sdram_params *params)
 {
 	unsigned char dramtype = params->base.dramtype;
 	unsigned int ddr_freq = params->base.ddr_freq;
-	struct rk3399_cru *cru = dram->cru;
-	int channel;
+	u32 training_flag = PI_READ_GATE_TRAINING;
+	int channel, ch, rank;
 	int ret;
 
 	debug("Starting SDRAM initialization...\n");
@@ -1272,36 +1311,75 @@ static int sdram_init(struct dram_info *dram,
 		return -E2BIG;
 	}
 
+	for (ch = 0; ch < 2; ch++) {
+		params->ch[ch].cap_info.rank = 2;
+		for (rank = 2; rank != 0; rank--) {
+			ret = pctl_init(dram, params);
+			if (ret < 0) {
+				printf("%s: pctl init failed\n", __func__);
+				return ret;
+			}
+
+			/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
+			if (dramtype == LPDDR3)
+				udelay(10);
+
+			params->ch[ch].cap_info.rank = rank;
+
+			/*
+			 * LPDDR3 CA training msut be trigger before
+			 * other training.
+			 * DDR3 is not have CA training.
+			 */
+			if (params->base.dramtype == LPDDR3)
+				training_flag |= PI_CA_TRAINING;
+
+			if (!(data_training(&dram->chan[ch], ch,
+					    params, training_flag)))
+				break;
+		}
+		/* Computed rank with associated channel number */
+		params->ch[ch].cap_info.rank = rank;
+	}
+
+	params->base.num_channels = 0;
 	for (channel = 0; channel < 2; channel++) {
 		const struct chan_info *chan = &dram->chan[channel];
-		struct rk3399_ddr_publ_regs *publ = chan->publ;
-
-		phy_pctrl_reset(cru, channel);
-		phy_dll_bypass_set(publ, ddr_freq);
+		struct sdram_cap_info *cap_info = &params->ch[channel].cap_info;
+		u8 training_flag = PI_FULL_TRAINING;
 
-		if (channel >= params->base.num_channels)
+		if (cap_info->rank == 0) {
+			clear_channel_params(params, channel);
 			continue;
-
-		ret = pctl_cfg(dram, chan, channel, params);
-		if (ret < 0) {
-			printf("%s: pctl config failed\n", __func__);
-			return ret;
+		} else {
+			params->base.num_channels++;
 		}
 
-		/* start to trigger initialization */
-		pctl_start(dram, channel);
+		debug("Channel ");
+		debug(channel ? "1: " : "0: ");
 
-		/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
-		if (dramtype == LPDDR3)
-			udelay(10);
+		/* LPDDR3 should have write and read gate training */
+		if (params->base.dramtype == LPDDR3)
+			training_flag = PI_WRITE_LEVELING |
+					PI_READ_GATE_TRAINING;
 
-		if (data_training(chan, channel, params, PI_FULL_TRAINING)) {
-			printf("%s: data training failed\n", __func__);
-			return -EIO;
+		if (params->base.dramtype != LPDDR4) {
+			ret = data_training(dram, channel, params,
+					    training_flag);
+			if (!ret) {
+				debug("%s: data train failed for channel %d\n",
+				      __func__, ret);
+				continue;
+			}
 		}
 
-		set_ddrconfig(chan, params, channel,
-			      params->ch[channel].cap_info.ddrconfig);
+		set_ddrconfig(chan, params, channel, cap_info->ddrconfig);
+	}
+
+	if (params->base.num_channels == 0) {
+		printf("%s: ", __func__);
+		printf(" - %dMHz failed!\n", params->base.ddr_freq);
+		return -EINVAL;
 	}
 
 	params->base.stride = calculate_stride(params);