diff options
author | Wolfgang Denk <wd@pollux.(none)> | 2005-12-16 17:39:27 +0100 |
---|---|---|
committer | Wolfgang Denk <wd@pollux.(none)> | 2005-12-16 17:39:27 +0100 |
commit | e6b6d16de73de6a76e2ec4338291e828b860f040 (patch) | |
tree | 0ebf5806297c9fd497c7fb39d0dd0fd7f9d1a8f2 | |
parent | a9e642e2f8c944b9c0ffb5564fda262f6d3da0a3 (diff) | |
parent | 81a3170b150cbcafc9a59c080f0e759f6a2a5ce5 (diff) |
Merge with /home/sr/git/u-boot
-rw-r--r-- | CHANGELOG | 7 | ||||
-rw-r--r-- | board/amcc/yellowstone/yellowstone.c | 93 | ||||
-rw-r--r-- | board/amcc/yosemite/yosemite.c | 93 |
3 files changed, 179 insertions, 14 deletions
@@ -2,6 +2,13 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Changes to Yellowstone & Yosemite 440EP/GR eval boards: + - Changed GPIO setup to enable another address line in order to + address 64M of FLASH. + - Added function sdram_tr1_set to auto calculate the tr1 value for + the DDR. + Patch by Steven Blakeslee, 12 Dec 2005 + * MPC5200: Set PCI retry counter to 0 = infinite retry; The default of 255 is too short for slow devices. Patch by Martin Nykodym, 12 Dec 2005 diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 585f0720fb..8ddf910c8e 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -59,10 +59,10 @@ int board_early_init_f(void) * Setup the GPIO pins *-------------------------------------------------------------------*/ /*CPLD cs */ - /*setup Address lines for flash sizes larger than 16Meg. */ - out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000); + /*setup Address lines for flash size 64Meg. */ + out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000); + out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000); + out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000); /*setup emac */ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080); @@ -129,7 +129,7 @@ int board_early_init_f(void) #endif /*get rid of flash write protect */ - *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40; + *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; return 0; } @@ -207,9 +207,85 @@ int checkboard(void) * PLB @ 133 MHz * ************************************************************************/ +#define NUM_TRIES 64 +#define NUM_READS 10 + +void sdram_tr1_set(int ram_address, int* tr1_value) +{ + int i; + int j, k; + volatile unsigned int* ram_pointer = (unsigned int*)ram_address; + int first_good = -1, last_bad = 0x1ff; + + unsigned long test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + /* go through all possible SDRAM0_TR1[RDCT] values */ + for (i=0; i<=0x1ff; i++) { + /* set the current value for TR1 */ + mtsdram(mem_tr1, (0x80800800 | i)); + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) { + break; + } + } + + /* we have a SDRAM0_TR1[RDCT] that is part of the window */ + if (j == NUM_TRIES) { + if (first_good == -1) + first_good = i; /* found beginning of window */ + } else { /* bad read */ + /* if we have not had a good read then don't care */ + if(first_good != -1) { + /* first failure after a good read */ + last_bad = i-1; + break; + } + } + } + + /* return the current value for TR1 */ + *tr1_value = (first_good + last_bad) / 2; +} + void sdram_init(void) { register uint reg; + int tr1_bank1, tr1_bank2; /*-------------------------------------------------------------------- * Setup some default @@ -221,7 +297,7 @@ void sdram_init(void) mtsdram(mem_wddctr, 0x40000000); /* ?? */ /*clear this first, if the DDR is enabled by a debugger - then you can not make changes. */ + then you can not make changes. */ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ /*-------------------------------------------------------------------- @@ -234,7 +310,6 @@ void sdram_init(void) mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_tr1, 0x8080080b); /* ?? */ mtsdram(mem_rtr, 0x04080000); /* ?? */ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */ @@ -250,6 +325,10 @@ void sdram_init(void) if (reg & 0x80000000) break; } + + sdram_tr1_set(0x00000000, &tr1_bank1); + sdram_tr1_set(0x08000000, &tr1_bank2); + mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) ); } /************************************************************************* diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 6694517103..509d8e4cce 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -59,10 +59,10 @@ int board_early_init_f(void) * Setup the GPIO pins *-------------------------------------------------------------------*/ /*CPLD cs */ - /*setup Address lines for flash sizes larger than 16Meg. */ - out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000); + /*setup Address lines for flash size 64Meg. */ + out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000); + out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000); + out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000); /*setup emac */ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080); @@ -125,7 +125,7 @@ int board_early_init_f(void) *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00; /*get rid of flash write protect */ - *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40; + *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; return 0; } @@ -203,9 +203,85 @@ int checkboard(void) * PLB @ 133 MHz * ************************************************************************/ +#define NUM_TRIES 64 +#define NUM_READS 10 + +void sdram_tr1_set(int ram_address, int* tr1_value) +{ + int i; + int j, k; + volatile unsigned int* ram_pointer = (unsigned int*)ram_address; + int first_good = -1, last_bad = 0x1ff; + + unsigned long test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + /* go through all possible SDRAM0_TR1[RDCT] values */ + for (i=0; i<=0x1ff; i++) { + /* set the current value for TR1 */ + mtsdram(mem_tr1, (0x80800800 | i)); + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) { + break; + } + } + + /* we have a SDRAM0_TR1[RDCT] that is part of the window */ + if (j == NUM_TRIES) { + if (first_good == -1) + first_good = i; /* found beginning of window */ + } else { /* bad read */ + /* if we have not had a good read then don't care */ + if(first_good != -1) { + /* first failure after a good read */ + last_bad = i-1; + break; + } + } + } + + /* return the current value for TR1 */ + *tr1_value = (first_good + last_bad) / 2; +} + void sdram_init(void) { register uint reg; + int tr1_bank1, tr1_bank2; /*-------------------------------------------------------------------- * Setup some default @@ -217,7 +293,7 @@ void sdram_init(void) mtsdram(mem_wddctr, 0x40000000); /* ?? */ /*clear this first, if the DDR is enabled by a debugger - then you can not make changes. */ + then you can not make changes. */ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ /*-------------------------------------------------------------------- @@ -230,7 +306,6 @@ void sdram_init(void) mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_tr1, 0x8080080b); /* ?? */ mtsdram(mem_rtr, 0x04080000); /* ?? */ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */ @@ -246,6 +321,10 @@ void sdram_init(void) if (reg & 0x80000000) break; } + + sdram_tr1_set(0x00000000, &tr1_bank1); + sdram_tr1_set(0x08000000, &tr1_bank2); + mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) ); } /************************************************************************* |